Merge tag 'gpio-v4.11-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio

Pull GPIO updates from Linus Walleij:
 "This is the bulk of GPIO changes for the v4.11 cycle

  Core changes:

   - Augment fwnode_get_named_gpiod() to configure the GPIO pin
     immediately after requesting it like all other APIs do. This is a
     treewide change also updating all users.

   - Pass a GPIO label down to gpiod_request() from
     fwnode_get_named_gpiod(). This makes debugfs and the userspace ABI
     correctly reflect the current in-kernel consumer of a pin taken
     using this abstraction. This is a treewide change also updating all
     users.

   - Rename devm_get_gpiod_from_child() to
     devm_fwnode_get_gpiod_from_child() to reflect the fact that this
     function is operating on a fwnode object. This is a treewide change
     also updating all users.

   - Make it possible to take multiple GPIOs in a single hog of device
     tree hogs.

   - The refactorings switching GPIO chips to use the .set_config()
     callback using standard pin control properties and providing a
     backend into the pin control subsystem that were also merged into
     the pin control tree naturally appear here too.

  Testing instrumentation:

   - A whole slew of cleanups and improvements to the mockup GPIO
     driver. We now have an extended userspace test exercising the
     subsystem, and we can inject interrupts etc from userspace to fully
     test the core GPIO functionality.

  New drivers:

   - New driver for the Cortina Systems Gemini GPIO controller.

   - New driver for the Exar XR17V352/354/358 chips.

   - New driver for the ACCES PCI-IDIO-16 PCI GPIO card.

  Driver changes:

   - RCAR: set the irqchip parent device, add fine-grained runtime PM
     support.

   - pca953x: support optional RESET control line on the chip.

   - DaVinci: cleanups and simplifications. Add support for multiple
     instances.

   - .set_multiple() and naming of lines on more or less all of the
     ISA/PCI GPIO controllers.

   - mcp23s08: refactored to use regmap as a first step to further
     rewrites and modernizations"

* tag 'gpio-v4.11-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio: (61 commits)
  gpio: reintroduce devm_get_gpiod_from_child()
  gpio: pci-idio-16: Fix PCI BAR index
  gpio: pci-idio-16: Fix PCI device ID code
  gpio: mockup: implement event injecting over debugfs
  gpio: mockup: add a dummy irqchip
  gpio: mockup: implement naming the lines
  gpio: mockup: code shrink
  gpio: mockup: readability tweaks
  gpio: Add GPIO support for the ACCES PCI-IDIO-16
  gpio: Add the devm_fwnode_get_index_gpiod_from_child() helper
  gpio: Rename devm_get_gpiod_from_child()
  gpio: mcp23s08: Select REGMAP/REGMAP_I2C to fix build error
  gpio: ws16c48: Add support for GPIO names
  gpio: gpio-mm: Add support for GPIO names
  gpio: 104-idio-16: Add support for GPIO names
  gpio: 104-idi-48: Add support for GPIO names
  gpio: 104-dio-48e: Add support for GPIO names
  gpio: ws16c48: Remove unnecessary driver_data set
  gpio: gpio-mm: Remove unnecessary driver_data set
  gpio: 104-idio-16: Remove unnecessary driver_data set
  ...

3 files changed, 32 insertions, 4 deletions

diff --git a/Documentation/devicetree/bindings/gpio/cortina,gemini-gpio.txt b/Documentation/devicetree/bindings/gpio/cortina,gemini-gpio.txt
new file mode 100644
index 000000000000..5c9246c054e5
--- /dev/null
+++ b/Documentation/devicetree/bindings/gpio/cortina,gemini-gpio.txt
@@ -0,0 +1,24 @@
+Cortina Systems Gemini GPIO Controller
+
+Required properties:
+
+- compatible : Must be "cortina,gemini-gpio"
+- reg : Should contain registers location and length
+- interrupts : Should contain the interrupt line for the GPIO block
+- gpio-controller : marks this as a GPIO controller
+- #gpio-cells : Should be 2, see gpio/gpio.txt
+- interrupt-controller : marks this as an interrupt controller
+- #interrupt-cells : a standard two-cell interrupt flag, see
+  interrupt-controller/interrupts.txt
+
+Example:
+
+gpio@4d000000 {
+	compatible = "cortina,gemini-gpio";
+	reg = <0x4d000000 0x100>;
+	interrupts = <22 IRQ_TYPE_LEVEL_HIGH>;
+	gpio-controller;
+	#gpio-cells = <2>;
+	interrupt-controller;
+	#interrupt-cells = <2>;
+};
diff --git a/Documentation/devicetree/bindings/gpio/gpio-pca953x.txt b/Documentation/devicetree/bindings/gpio/gpio-pca953x.txt
index 08dd15f89ba9..e63935710011 100644
--- a/Documentation/devicetree/bindings/gpio/gpio-pca953x.txt
+++ b/Documentation/devicetree/bindings/gpio/gpio-pca953x.txt
@@ -29,6 +29,10 @@ Required properties:
 	onsemi,pca9654
 	exar,xra1202
 
+Optional properties:
+ - reset-gpios: GPIO specification for the RESET input. This is an
+		active low signal to the PCA953x.
+
 Example:
 
 
diff --git a/Documentation/devicetree/bindings/gpio/gpio.txt b/Documentation/devicetree/bindings/gpio/gpio.txt
index 68d28f62a6f4..84ede036f73d 100644
--- a/Documentation/devicetree/bindings/gpio/gpio.txt
+++ b/Documentation/devicetree/bindings/gpio/gpio.txt
@@ -187,10 +187,10 @@ gpio-controller's driver probe function.
 
 Each GPIO hog definition is represented as a child node of the GPIO controller.
 Required properties:
-- gpio-hog:   A property specifying that this child node represent a GPIO hog.
-- gpios:      Store the GPIO information (id, flags, ...). Shall contain the
-	      number of cells specified in its parent node (GPIO controller
-	      node).
+- gpio-hog:   A property specifying that this child node represents a GPIO hog.
+- gpios:      Store the GPIO information (id, flags, ...) for each GPIO to
+	      affect. Shall contain an integer multiple of the number of cells
+	      specified in its parent node (GPIO controller node).
 Only one of the following properties scanned in the order shown below.
 This means that when multiple properties are present they will be searched
 in the order presented below and the first match is taken as the intended