Merge tag 'devicetree-for-5.8' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux

Pull devicetree updates from Rob Herring:

 - Convert various DT (non-binding) doc files to ReST

 - Various improvements to device link code

 - Fix __of_attach_node_sysfs refcounting bug

 - Add support for 'memory-region-names' with reserved-memory binding

 - Vendor prefixes for Protonic Holland, BeagleBoard.org, Alps, Check
   Point, Würth Elektronik, U-Boot, Vaisala, Baikal Electronics,
   Shanghai Awinic Technology Co., MikroTik, Silex Insight

 - A bunch more binding conversions to DT schema. Only 3K to go.

 - Add a minimum version check for schema tools

 - Treewide dropping of 'allOf' usage with schema references. Not needed
   in new json-schema spec.

 - Some formatting clean-ups of schemas

* tag 'devicetree-for-5.8' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: (194 commits)
  dt-bindings: clock: Add documentation for X1830 bindings.
  dt-bindings: mailbox: Convert imx mu to json-schema
  dt-bindings: power: Convert imx gpcv2 to json-schema
  dt-bindings: power: Convert imx gpc to json-schema
  dt-bindings: Merge gpio-usb-b-connector with usb-connector
  dt-bindings: timer: renesas: cmt: Convert to json-schema
  dt-bindings: clock: Convert i.MX8QXP LPCG to json-schema
  dt-bindings: timer: Convert i.MX GPT to json-schema
  dt-bindings: thermal: rcar-thermal: Add device tree support for r8a7742
  dt-bindings: serial: Add binding for UART pin swap
  dt-bindings: geni-se: Add interconnect binding for GENI QUP
  dt-bindings: geni-se: Convert QUP geni-se bindings to YAML
  dt-bindings: vendor-prefixes: Add Silex Insight vendor prefix
  dt-bindings: input: touchscreen: edt-ft5x06: change reg property
  dt-bindings: usb: qcom,dwc3: Introduce interconnect properties for Qualcomm DWC3 driver
  dt-bindings: timer: renesas: mtu2: Convert to json-schema
  of/fdt: Remove redundant kbasename function call
  dt-bindings: clock: Convert i.MX1 clock to json-schema
  dt-bindings: clock: Convert i.MX21 clock to json-schema
  dt-bindings: clock: Convert i.MX25 clock to json-schema
  ...

18 files changed, 845 insertions, 448 deletions

diff --git a/Documentation/devicetree/bindings/timer/arm,arch_timer.yaml b/Documentation/devicetree/bindings/timer/arm,arch_timer.yaml
index fa255672e8e5..2c75105c1398 100644
--- a/Documentation/devicetree/bindings/timer/arm,arch_timer.yaml
+++ b/Documentation/devicetree/bindings/timer/arm,arch_timer.yaml
@@ -28,10 +28,10 @@ properties:
               - arm,armv7-timer
       - items:
           - enum:
-            - arm,armv7-timer
+              - arm,armv7-timer
       - items:
           - enum:
-            - arm,armv8-timer
+              - arm,armv8-timer
 
   interrupts:
     items:
@@ -51,6 +51,12 @@ properties:
     description: If present, the timer is powered through an always-on power
       domain, therefore it never loses context.
 
+  allwinner,erratum-unknown1:
+    type: boolean
+    description: Indicates the presence of an erratum found in Allwinner SoCs,
+      where reading certain values from the counter is unreliable. This also
+      affects writes to the tval register, due to the implicit counter read.
+
   fsl,erratum-a008585:
     type: boolean
     description: Indicates the presence of QorIQ erratum A-008585, which says
diff --git a/Documentation/devicetree/bindings/timer/arm,arch_timer_mmio.yaml b/Documentation/devicetree/bindings/timer/arm,arch_timer_mmio.yaml
index 582bbef62b95..d83a1f97f911 100644
--- a/Documentation/devicetree/bindings/timer/arm,arch_timer_mmio.yaml
+++ b/Documentation/devicetree/bindings/timer/arm,arch_timer_mmio.yaml
@@ -20,7 +20,7 @@ properties:
   compatible:
     items:
       - enum:
-        - arm,armv7-timer-mem
+          - arm,armv7-timer-mem
 
   reg:
     maxItems: 1
@@ -65,10 +65,9 @@ patternProperties:
     description: A timer node has up to 8 frame sub-nodes, each with the following properties.
     properties:
       frame-number:
-        allOf:
-          - $ref: "/schemas/types.yaml#/definitions/uint32"
-          - minimum: 0
-            maximum: 7
+        $ref: "/schemas/types.yaml#/definitions/uint32"
+        minimum: 0
+        maximum: 7
 
       interrupts:
         minItems: 1
@@ -77,7 +76,7 @@ patternProperties:
           - description: physical timer irq
           - description: virtual timer irq
 
-      reg :
+      reg:
         minItems: 1
         maxItems: 2
         items:
diff --git a/Documentation/devicetree/bindings/timer/cadence,ttc-timer.txt b/Documentation/devicetree/bindings/timer/cadence,ttc-timer.txt
deleted file mode 100644
index eeee6cd51e5c..000000000000
--- a/Documentation/devicetree/bindings/timer/cadence,ttc-timer.txt
+++ /dev/null
@@ -1,21 +0,0 @@
-Cadence TTC - Triple Timer Counter
-
-Required properties:
-- compatible : Should be "cdns,ttc".
-- reg : Specifies base physical address and size of the registers.
-- interrupts : A list of 3 interrupts; one per timer channel.
-- clocks: phandle to the source clock
-
-Optional properties:
-- timer-width: Bit width of the timer, necessary if not 16.
-
-Example:
-
-ttc0: ttc0@f8001000 {
-	interrupt-parent = <&intc>;
-	interrupts = < 0 10 4 0 11 4 0 12 4 >;
-	compatible = "cdns,ttc";
-	reg = <0xF8001000 0x1000>;
-	clocks = <&cpu_clk 3>;
-	timer-width = <32>;
-};
diff --git a/Documentation/devicetree/bindings/timer/cdns,ttc.yaml b/Documentation/devicetree/bindings/timer/cdns,ttc.yaml
new file mode 100644
index 000000000000..c532b60b9c63
--- /dev/null
+++ b/Documentation/devicetree/bindings/timer/cdns,ttc.yaml
@@ -0,0 +1,48 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/timer/cdns,ttc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Cadence TTC - Triple Timer Counter
+
+maintainers:
+  - Michal Simek <michal.simek@xilinx.com>
+
+properties:
+  compatible:
+    const: cdns,ttc
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    minItems: 3
+    maxItems: 3
+    description: |
+      A list of 3 interrupts; one per timer channel.
+
+  clocks:
+    maxItems: 1
+
+  timer-width:
+    $ref: "/schemas/types.yaml#/definitions/uint32"
+    description: |
+      Bit width of the timer, necessary if not 16.
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+
+examples:
+  - |
+    ttc0: ttc0@f8001000 {
+        interrupt-parent = <&intc>;
+        interrupts = <0 10 4>, <0 11 4>, <0 12 4>;
+        compatible = "cdns,ttc";
+        reg = <0xF8001000 0x1000>;
+        clocks = <&cpu_clk 3>;
+        timer-width = <32>;
+    };
diff --git a/Documentation/devicetree/bindings/timer/fsl,imxgpt.txt b/Documentation/devicetree/bindings/timer/fsl,imxgpt.txt
deleted file mode 100644
index 5d8fd5b52598..000000000000
--- a/Documentation/devicetree/bindings/timer/fsl,imxgpt.txt
+++ /dev/null
@@ -1,45 +0,0 @@
-Freescale i.MX General Purpose Timer (GPT)
-
-Required properties:
-
-- compatible : should be one of following:
-  for i.MX1:
-  - "fsl,imx1-gpt";
-  for i.MX21:
-  - "fsl,imx21-gpt";
-  for i.MX27:
-  - "fsl,imx27-gpt", "fsl,imx21-gpt";
-  for i.MX31:
-  - "fsl,imx31-gpt";
-  for i.MX25:
-  - "fsl,imx25-gpt", "fsl,imx31-gpt";
-  for i.MX50:
-  - "fsl,imx50-gpt", "fsl,imx31-gpt";
-  for i.MX51:
-  - "fsl,imx51-gpt", "fsl,imx31-gpt";
-  for i.MX53:
-  - "fsl,imx53-gpt", "fsl,imx31-gpt";
-  for i.MX6Q:
-  - "fsl,imx6q-gpt", "fsl,imx31-gpt";
-  for i.MX6DL:
-  - "fsl,imx6dl-gpt";
-  for i.MX6SL:
-  - "fsl,imx6sl-gpt", "fsl,imx6dl-gpt";
-  for i.MX6SX:
-  - "fsl,imx6sx-gpt", "fsl,imx6dl-gpt";
-- reg : specifies base physical address and size of the registers.
-- interrupts : should be the gpt interrupt.
-- clocks : the clocks provided by the SoC to drive the timer, must contain
-           an entry for each entry in clock-names.
-- clock-names : must include "ipg" entry first, then "per" entry.
-
-Example:
-
-gpt1: timer@10003000 {
-	compatible = "fsl,imx27-gpt", "fsl,imx21-gpt";
-	reg = <0x10003000 0x1000>;
-	interrupts = <26>;
-	clocks = <&clks IMX27_CLK_GPT1_IPG_GATE>,
-		 <&clks IMX27_CLK_PER1_GATE>;
-	clock-names = "ipg", "per";
-};
diff --git a/Documentation/devicetree/bindings/timer/fsl,imxgpt.yaml b/Documentation/devicetree/bindings/timer/fsl,imxgpt.yaml
new file mode 100644
index 000000000000..883f7f46650b
--- /dev/null
+++ b/Documentation/devicetree/bindings/timer/fsl,imxgpt.yaml
@@ -0,0 +1,72 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/timer/fsl,imxgpt.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Freescale i.MX General Purpose Timer (GPT)
+
+maintainers:
+  - Sascha Hauer <s.hauer@pengutronix.de>
+
+properties:
+  compatible:
+    oneOf:
+      - const: fsl,imx1-gpt
+      - const: fsl,imx21-gpt
+      - items:
+          - const: fsl,imx27-gpt
+          - const: fsl,imx21-gpt
+      - const: fsl,imx31-gpt
+      - items:
+          - enum:
+            - fsl,imx25-gpt
+            - fsl,imx50-gpt
+            - fsl,imx51-gpt
+            - fsl,imx53-gpt
+            - fsl,imx6q-gpt
+          - const: fsl,imx31-gpt
+      - const: fsl,imx6dl-gpt
+      - items:
+          - enum:
+            - fsl,imx6sl-gpt
+            - fsl,imx6sx-gpt
+          - const: fsl,imx6dl-gpt
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    items:
+      - description: SoC GPT ipg clock
+      - description: SoC GPT per clock
+
+  clock-names:
+    items:
+      - const: ipg
+      - const: per
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+  - clock-names
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/imx27-clock.h>
+
+    timer@10003000 {
+        compatible = "fsl,imx27-gpt", "fsl,imx21-gpt";
+        reg = <0x10003000 0x1000>;
+        interrupts = <26>;
+        clocks = <&clks IMX27_CLK_GPT1_IPG_GATE>,
+                 <&clks IMX27_CLK_PER1_GATE>;
+        clock-names = "ipg", "per";
+    };
diff --git a/Documentation/devicetree/bindings/timer/ingenic,tcu.txt b/Documentation/devicetree/bindings/timer/ingenic,tcu.txt
deleted file mode 100644
index 91f704951845..000000000000
--- a/Documentation/devicetree/bindings/timer/ingenic,tcu.txt
+++ /dev/null
@@ -1,138 +0,0 @@
-Ingenic JZ47xx SoCs Timer/Counter Unit devicetree bindings
-==========================================================
-
-For a description of the TCU hardware and drivers, have a look at
-Documentation/mips/ingenic-tcu.rst.
-
-Required properties:
-
-- compatible: Must be one of:
-  * ingenic,jz4740-tcu
-  * ingenic,jz4725b-tcu
-  * ingenic,jz4770-tcu
-  * ingenic,x1000-tcu
-  followed by "simple-mfd".
-- reg: Should be the offset/length value corresponding to the TCU registers
-- clocks: List of phandle & clock specifiers for clocks external to the TCU.
-  The "pclk", "rtc" and "ext" clocks should be provided. The "tcu" clock
-  should be provided if the SoC has it.
-- clock-names: List of name strings for the external clocks.
-- #clock-cells: Should be <1>;
-  Clock consumers specify this argument to identify a clock. The valid values
-  may be found in <dt-bindings/clock/ingenic,tcu.h>.
-- interrupt-controller : Identifies the node as an interrupt controller
-- #interrupt-cells : Specifies the number of cells needed to encode an
-  interrupt source. The value should be 1.
-- interrupts : Specifies the interrupt the controller is connected to.
-
-Optional properties:
-
-- ingenic,pwm-channels-mask: Bitmask of TCU channels reserved for PWM use.
-  Default value is 0xfc.
-
-
-Children nodes
-==========================================================
-
-
-PWM node:
----------
-
-Required properties:
-
-- compatible: Must be one of:
-  * ingenic,jz4740-pwm
-  * ingenic,jz4725b-pwm
-- #pwm-cells: Should be 3. See ../pwm/pwm.yaml for a description of the cell
-  format.
-- clocks: List of phandle & clock specifiers for the TCU clocks.
-- clock-names: List of name strings for the TCU clocks.
-
-
-Watchdog node:
---------------
-
-Required properties:
-
-- compatible: Must be "ingenic,jz4740-watchdog"
-- clocks: phandle to the WDT clock
-- clock-names: should be "wdt"
-
-
-OS Timer node:
----------
-
-Required properties:
-
-- compatible: Must be one of:
-  * ingenic,jz4725b-ost
-  * ingenic,jz4770-ost
-- clocks: phandle to the OST clock
-- clock-names: should be "ost"
-- interrupts : Specifies the interrupt the OST is connected to.
-
-
-Example
-==========================================================
-
-#include <dt-bindings/clock/jz4770-cgu.h>
-#include <dt-bindings/clock/ingenic,tcu.h>
-
-/ {
-	tcu: timer@10002000 {
-		compatible = "ingenic,jz4770-tcu", "simple-mfd";
-		reg = <0x10002000 0x1000>;
-		#address-cells = <1>;
-		#size-cells = <1>;
-		ranges = <0x0 0x10002000 0x1000>;
-
-		#clock-cells = <1>;
-
-		clocks = <&cgu JZ4770_CLK_RTC
-			  &cgu JZ4770_CLK_EXT
-			  &cgu JZ4770_CLK_PCLK>;
-		clock-names = "rtc", "ext", "pclk";
-
-		interrupt-controller;
-		#interrupt-cells = <1>;
-
-		interrupt-parent = <&intc>;
-		interrupts = <27 26 25>;
-
-		watchdog: watchdog@0 {
-			compatible = "ingenic,jz4740-watchdog";
-			reg = <0x0 0xc>;
-
-			clocks = <&tcu TCU_CLK_WDT>;
-			clock-names = "wdt";
-		};
-
-		pwm: pwm@40 {
-			compatible = "ingenic,jz4740-pwm";
-			reg = <0x40 0x80>;
-
-			#pwm-cells = <3>;
-
-			clocks = <&tcu TCU_CLK_TIMER0
-				  &tcu TCU_CLK_TIMER1
-				  &tcu TCU_CLK_TIMER2
-				  &tcu TCU_CLK_TIMER3
-				  &tcu TCU_CLK_TIMER4
-				  &tcu TCU_CLK_TIMER5
-				  &tcu TCU_CLK_TIMER6
-				  &tcu TCU_CLK_TIMER7>;
-			clock-names = "timer0", "timer1", "timer2", "timer3",
-				      "timer4", "timer5", "timer6", "timer7";
-		};
-
-		ost: timer@e0 {
-			compatible = "ingenic,jz4770-ost";
-			reg = <0xe0 0x20>;
-
-			clocks = <&tcu TCU_CLK_OST>;
-			clock-names = "ost";
-
-			interrupts = <15>;
-		};
-	};
-};
diff --git a/Documentation/devicetree/bindings/timer/ingenic,tcu.yaml b/Documentation/devicetree/bindings/timer/ingenic,tcu.yaml
new file mode 100644
index 000000000000..03893e6a2f57
--- /dev/null
+++ b/Documentation/devicetree/bindings/timer/ingenic,tcu.yaml
@@ -0,0 +1,280 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/timer/ingenic,tcu.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Ingenic SoCs Timer/Counter Unit (TCU) devicetree bindings
+
+description: |
+  For a description of the TCU hardware and drivers, have a look at
+  Documentation/mips/ingenic-tcu.rst.
+
+maintainers:
+  - Paul Cercueil <paul@crapouillou.net>
+
+select:
+  properties:
+    compatible:
+      contains:
+        enum:
+          - ingenic,jz4740-tcu
+          - ingenic,jz4725b-tcu
+          - ingenic,jz4770-tcu
+          - ingenic,jz4780-tcu
+          - ingenic,x1000-tcu
+  required:
+    - compatible
+
+properties:
+  $nodename:
+    pattern: "^timer@[0-9a-f]+$"
+
+  "#address-cells":
+    const: 1
+
+  "#size-cells":
+    const: 1
+
+  "#clock-cells":
+    const: 1
+
+  "#interrupt-cells":
+    const: 1
+
+  interrupt-controller: true
+
+  ranges: true
+
+  compatible:
+    oneOf:
+      - items:
+        - enum:
+          - ingenic,jz4740-tcu
+          - ingenic,jz4725b-tcu
+          - ingenic,jz4770-tcu
+          - ingenic,x1000-tcu
+        - const: simple-mfd
+      - items:
+        - const: ingenic,jz4780-tcu
+        - const: ingenic,jz4770-tcu
+        - const: simple-mfd
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    items:
+      - description: RTC clock
+      - description: EXT clock
+      - description: PCLK clock
+      - description: TCU clock
+    minItems: 3
+
+  clock-names:
+    items:
+      - const: rtc
+      - const: ext
+      - const: pclk
+      - const: tcu
+    minItems: 3
+
+  interrupts:
+    items:
+      - description: TCU0 interrupt
+      - description: TCU1 interrupt
+      - description: TCU2 interrupt
+    minItems: 1
+
+  assigned-clocks:
+    minItems: 1
+    maxItems: 8
+
+  assigned-clock-parents:
+    minItems: 1
+    maxItems: 8
+
+  assigned-clock-rates:
+    minItems: 1
+    maxItems: 8
+
+  ingenic,pwm-channels-mask:
+    description: Bitmask of TCU channels reserved for PWM use.
+    $ref: /schemas/types.yaml#/definitions/uint32
+    minimum: 0x00
+    maximum: 0xff
+    default: 0xfc
+
+patternProperties:
+  "^watchdog@[a-f0-9]+$":
+    type: object
+    $ref: ../watchdog/watchdog.yaml#
+    properties:
+      compatible:
+        oneOf:
+          - enum:
+            - ingenic,jz4740-watchdog
+            - ingenic,jz4780-watchdog
+          - items:
+            - const: ingenic,jz4770-watchdog
+            - const: ingenic,jz4740-watchdog
+
+      reg:
+        maxItems: 1
+
+      clocks:
+        maxItems: 1
+
+      clock-names:
+        const: wdt
+
+    required:
+      - compatible
+      - reg
+      - clocks
+      - clock-names
+
+  "^pwm@[a-f0-9]+$":
+    type: object
+    $ref: ../pwm/pwm.yaml#
+    properties:
+      compatible:
+        oneOf:
+          - enum:
+            - ingenic,jz4740-pwm
+          - items:
+            - enum:
+              - ingenic,jz4770-pwm
+              - ingenic,jz4780-pwm
+            - const: ingenic,jz4740-pwm
+
+      reg:
+        maxItems: 1
+
+      clocks:
+        minItems: 6
+        maxItems: 8
+
+      clock-names:
+        items:
+          - const: timer0
+          - const: timer1
+          - const: timer2
+          - const: timer3
+          - const: timer4
+          - const: timer5
+          - const: timer6
+          - const: timer7
+        minItems: 6
+
+    required:
+      - compatible
+      - reg
+      - clocks
+      - clock-names
+
+  "^timer@[a-f0-9]+$":
+    type: object
+    properties:
+      compatible:
+        oneOf:
+          - enum:
+            - ingenic,jz4725b-ost
+            - ingenic,jz4770-ost
+          - items:
+            - const: ingenic,jz4780-ost
+            - const: ingenic,jz4770-ost
+
+      reg:
+        maxItems: 1
+
+      clocks:
+        maxItems: 1
+
+      clock-names:
+        const: ost
+
+      interrupts:
+        maxItems: 1
+
+    required:
+      - compatible
+      - reg
+      - clocks
+      - clock-names
+      - interrupts
+
+    additionalProperties: false
+
+required:
+  - "#clock-cells"
+  - "#interrupt-cells"
+  - interrupt-controller
+  - compatible
+  - reg
+  - clocks
+  - clock-names
+  - interrupts
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/jz4770-cgu.h>
+    #include <dt-bindings/clock/ingenic,tcu.h>
+    tcu: timer@10002000 {
+      compatible = "ingenic,jz4770-tcu", "simple-mfd";
+      reg = <0x10002000 0x1000>;
+      #address-cells = <1>;
+      #size-cells = <1>;
+      ranges = <0x0 0x10002000 0x1000>;
+
+      #clock-cells = <1>;
+
+      clocks = <&cgu JZ4770_CLK_RTC>,
+               <&cgu JZ4770_CLK_EXT>,
+               <&cgu JZ4770_CLK_PCLK>;
+      clock-names = "rtc", "ext", "pclk";
+
+      interrupt-controller;
+      #interrupt-cells = <1>;
+
+      interrupt-parent = <&intc>;
+      interrupts = <27 26 25>;
+
+      watchdog: watchdog@0 {
+        compatible = "ingenic,jz4770-watchdog", "ingenic,jz4740-watchdog";
+        reg = <0x0 0xc>;
+
+        clocks = <&tcu TCU_CLK_WDT>;
+        clock-names = "wdt";
+      };
+
+      pwm: pwm@40 {
+        compatible = "ingenic,jz4770-pwm", "ingenic,jz4740-pwm";
+        reg = <0x40 0x80>;
+
+        #pwm-cells = <3>;
+
+        clocks = <&tcu TCU_CLK_TIMER0>,
+                 <&tcu TCU_CLK_TIMER1>,
+                 <&tcu TCU_CLK_TIMER2>,
+                 <&tcu TCU_CLK_TIMER3>,
+                 <&tcu TCU_CLK_TIMER4>,
+                 <&tcu TCU_CLK_TIMER5>,
+                 <&tcu TCU_CLK_TIMER6>,
+                 <&tcu TCU_CLK_TIMER7>;
+        clock-names = "timer0", "timer1", "timer2", "timer3",
+                "timer4", "timer5", "timer6", "timer7";
+      };
+
+      ost: timer@e0 {
+        compatible = "ingenic,jz4770-ost";
+        reg = <0xe0 0x20>;
+
+        clocks = <&tcu TCU_CLK_OST>;
+        clock-names = "ost";
+
+        interrupts = <15>;
+      };
+    };
diff --git a/Documentation/devicetree/bindings/timer/nxp,sysctr-timer.txt b/Documentation/devicetree/bindings/timer/nxp,sysctr-timer.txt
deleted file mode 100644
index d57659996d62..000000000000
--- a/Documentation/devicetree/bindings/timer/nxp,sysctr-timer.txt
+++ /dev/null
@@ -1,25 +0,0 @@
-NXP System Counter Module(sys_ctr)
-
-The system counter(sys_ctr) is a programmable system counter which provides
-a shared time base to Cortex A15, A7, A53, A73, etc. it is intended for use in
-applications where the counter is always powered and support multiple,
-unrelated clocks. The compare frame inside can be used for timer purpose.
-
-Required properties:
-
-- compatible :      should be "nxp,sysctr-timer"
-- reg :             Specifies the base physical address and size of the comapre
-                    frame and the counter control, read & compare.
-- interrupts :      should be the first compare frames' interrupt
-- clocks : 	    Specifies the counter clock.
-- clock-names: 	    Specifies the clock's name of this module
-
-Example:
-
-	system_counter: timer@306a0000 {
-		compatible = "nxp,sysctr-timer";
-		reg = <0x306a0000 0x20000>;/* system-counter-rd & compare */
-		clocks = <&clk_8m>;
-		clock-names = "per";
-		interrupts = <GIC_SPI 47 IRQ_TYPE_LEVEL_HIGH>;
-	};
diff --git a/Documentation/devicetree/bindings/timer/nxp,sysctr-timer.yaml b/Documentation/devicetree/bindings/timer/nxp,sysctr-timer.yaml
new file mode 100644
index 000000000000..830211c55b4a
--- /dev/null
+++ b/Documentation/devicetree/bindings/timer/nxp,sysctr-timer.yaml
@@ -0,0 +1,54 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/timer/nxp,sysctr-timer.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: NXP System Counter Module(sys_ctr)
+
+maintainers:
+  - Bai Ping <ping.bai@nxp.com>
+
+description: |
+  The system counter(sys_ctr) is a programmable system counter
+  which provides a shared time base to Cortex A15, A7, A53, A73,
+  etc. it is intended for use in applications where the counter
+  is always powered and support multiple, unrelated clocks. The
+  compare frame inside can be used for timer purpose.
+
+properties:
+  compatible:
+    const: nxp,sysctr-timer
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  clock-names:
+    const: per
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+  - clock-names
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    timer@306a0000 {
+        compatible = "nxp,sysctr-timer";
+        reg = <0x306a0000 0x20000>;
+        clocks = <&clk_8m>;
+        clock-names = "per";
+        interrupts = <GIC_SPI 47 IRQ_TYPE_LEVEL_HIGH>;
+     };
diff --git a/Documentation/devicetree/bindings/timer/nxp,tpm-timer.txt b/Documentation/devicetree/bindings/timer/nxp,tpm-timer.txt
deleted file mode 100644
index f82087b220f4..000000000000
--- a/Documentation/devicetree/bindings/timer/nxp,tpm-timer.txt
+++ /dev/null
@@ -1,28 +0,0 @@
-NXP Low Power Timer/Pulse Width Modulation Module (TPM)
-
-The Timer/PWM Module (TPM) supports input capture, output compare,
-and the generation of PWM signals to control electric motor and power
-management applications. The counter, compare and capture registers
-are clocked by an asynchronous clock that can remain enabled in low
-power modes. TPM can support global counter bus where one TPM drives
-the counter bus for the others, provided bit width is the same.
-
-Required properties:
-
-- compatible :	should be "fsl,imx7ulp-tpm"
-- reg :		Specifies base physical address and size of the register sets
-		for the clock event device and clock source device.
-- interrupts :	Should be the clock event device interrupt.
-- clocks :	The clocks provided by the SoC to drive the timer, must contain
-		an entry for each entry in clock-names.
-- clock-names : Must include the following entries: "ipg" and "per".
-
-Example:
-tpm5: tpm@40260000 {
-	compatible = "fsl,imx7ulp-tpm";
-	reg = <0x40260000 0x1000>;
-	interrupts = <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>;
-	clocks = <&clks IMX7ULP_CLK_NIC1_BUS_DIV>,
-		 <&clks IMX7ULP_CLK_LPTPM5>;
-	clock-names = "ipg", "per";
-};
diff --git a/Documentation/devicetree/bindings/timer/nxp,tpm-timer.yaml b/Documentation/devicetree/bindings/timer/nxp,tpm-timer.yaml
new file mode 100644
index 000000000000..edd9585f6726
--- /dev/null
+++ b/Documentation/devicetree/bindings/timer/nxp,tpm-timer.yaml
@@ -0,0 +1,61 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/timer/nxp,tpm-timer.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: NXP Low Power Timer/Pulse Width Modulation Module (TPM)
+
+maintainers:
+  - Dong Aisheng <aisheng.dong@nxp.com>
+
+description: |
+  The Timer/PWM Module (TPM) supports input capture, output compare,
+  and the generation of PWM signals to control electric motor and power
+  management applications. The counter, compare and capture registers
+  are clocked by an asynchronous clock that can remain enabled in low
+  power modes. TPM can support global counter bus where one TPM drives
+  the counter bus for the others, provided bit width is the same.
+
+properties:
+  compatible:
+    const: fsl,imx7ulp-tpm
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    items:
+      - description: SoC TPM ipg clock
+      - description: SoC TPM per clock
+
+  clock-names:
+    items:
+      - const: ipg
+      - const: per
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+  - clock-names
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/imx7ulp-clock.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    timer@40260000 {
+        compatible = "fsl,imx7ulp-tpm";
+        reg = <0x40260000 0x1000>;
+        interrupts = <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>;
+        clocks = <&scg1 IMX7ULP_CLK_NIC1_BUS_DIV>,
+                 <&pcc2 IMX7ULP_CLK_LPTPM5>;
+        clock-names = "ipg", "per";
+    };
diff --git a/Documentation/devicetree/bindings/timer/renesas,cmt.txt b/Documentation/devicetree/bindings/timer/renesas,cmt.txt
deleted file mode 100644
index a747fabab7d3..000000000000
--- a/Documentation/devicetree/bindings/timer/renesas,cmt.txt
+++ /dev/null
@@ -1,110 +0,0 @@
-* Renesas R-Car Compare Match Timer (CMT)
-
-The CMT is a multi-channel 16/32/48-bit timer/counter with configurable clock
-inputs and programmable compare match.
-
-Channels share hardware resources but their counter and compare match value
-are independent. A particular CMT instance can implement only a subset of the
-channels supported by the CMT model. Channel indices represent the hardware
-position of the channel in the CMT and don't match the channel numbers in the
-datasheets.
-
-Required Properties:
-
-  - compatible: must contain one or more of the following:
-    - "renesas,r8a73a4-cmt0" for the 32-bit CMT0 device included in r8a73a4.
-    - "renesas,r8a73a4-cmt1" for the 48-bit CMT1 device included in r8a73a4.
-    - "renesas,r8a7740-cmt0" for the 32-bit CMT0 device included in r8a7740.
-    - "renesas,r8a7740-cmt1" for the 48-bit CMT1 device included in r8a7740.
-    - "renesas,r8a7740-cmt2" for the 32-bit CMT2 device included in r8a7740.
-    - "renesas,r8a7740-cmt3" for the 32-bit CMT3 device included in r8a7740.
-    - "renesas,r8a7740-cmt4" for the 32-bit CMT4 device included in r8a7740.
-    - "renesas,r8a7743-cmt0" for the 32-bit CMT0 device included in r8a7743.
-    - "renesas,r8a7743-cmt1" for the 48-bit CMT1 device included in r8a7743.
-    - "renesas,r8a7744-cmt0" for the 32-bit CMT0 device included in r8a7744.
-    - "renesas,r8a7744-cmt1" for the 48-bit CMT1 device included in r8a7744.
-    - "renesas,r8a7745-cmt0" for the 32-bit CMT0 device included in r8a7745.
-    - "renesas,r8a7745-cmt1" for the 48-bit CMT1 device included in r8a7745.
-    - "renesas,r8a77470-cmt0" for the 32-bit CMT0 device included in r8a77470.
-    - "renesas,r8a77470-cmt1" for the 48-bit CMT1 device included in r8a77470.
-    - "renesas,r8a774a1-cmt0" for the 32-bit CMT0 device included in r8a774a1.
-    - "renesas,r8a774a1-cmt1" for the 48-bit CMT devices included in r8a774a1.
-    - "renesas,r8a774b1-cmt0" for the 32-bit CMT0 device included in r8a774b1.
-    - "renesas,r8a774b1-cmt1" for the 48-bit CMT devices included in r8a774b1.
-    - "renesas,r8a774c0-cmt0" for the 32-bit CMT0 device included in r8a774c0.
-    - "renesas,r8a774c0-cmt1" for the 48-bit CMT devices included in r8a774c0.
-    - "renesas,r8a7790-cmt0" for the 32-bit CMT0 device included in r8a7790.
-    - "renesas,r8a7790-cmt1" for the 48-bit CMT1 device included in r8a7790.
-    - "renesas,r8a7791-cmt0" for the 32-bit CMT0 device included in r8a7791.
-    - "renesas,r8a7791-cmt1" for the 48-bit CMT1 device included in r8a7791.
-    - "renesas,r8a7792-cmt0" for the 32-bit CMT0 device included in r8a7792.
-    - "renesas,r8a7792-cmt1" for the 48-bit CMT1 device included in r8a7792.
-    - "renesas,r8a7793-cmt0" for the 32-bit CMT0 device included in r8a7793.
-    - "renesas,r8a7793-cmt1" for the 48-bit CMT1 device included in r8a7793.
-    - "renesas,r8a7794-cmt0" for the 32-bit CMT0 device included in r8a7794.
-    - "renesas,r8a7794-cmt1" for the 48-bit CMT1 device included in r8a7794.
-    - "renesas,r8a7795-cmt0" for the 32-bit CMT0 device included in r8a7795.
-    - "renesas,r8a7795-cmt1" for the 48-bit CMT devices included in r8a7795.
-    - "renesas,r8a7796-cmt0" for the 32-bit CMT0 device included in r8a7796.
-    - "renesas,r8a7796-cmt1" for the 48-bit CMT devices included in r8a7796.
-    - "renesas,r8a77965-cmt0" for the 32-bit CMT0 device included in r8a77965.
-    - "renesas,r8a77965-cmt1" for the 48-bit CMT devices included in r8a77965.
-    - "renesas,r8a77970-cmt0" for the 32-bit CMT0 device included in r8a77970.
-    - "renesas,r8a77970-cmt1" for the 48-bit CMT devices included in r8a77970.
-    - "renesas,r8a77980-cmt0" for the 32-bit CMT0 device included in r8a77980.
-    - "renesas,r8a77980-cmt1" for the 48-bit CMT devices included in r8a77980.
-    - "renesas,r8a77990-cmt0" for the 32-bit CMT0 device included in r8a77990.
-    - "renesas,r8a77990-cmt1" for the 48-bit CMT devices included in r8a77990.
-    - "renesas,r8a77995-cmt0" for the 32-bit CMT0 device included in r8a77995.
-    - "renesas,r8a77995-cmt1" for the 48-bit CMT devices included in r8a77995.
-    - "renesas,sh73a0-cmt0" for the 32-bit CMT0 device included in sh73a0.
-    - "renesas,sh73a0-cmt1" for the 48-bit CMT1 device included in sh73a0.
-    - "renesas,sh73a0-cmt2" for the 32-bit CMT2 device included in sh73a0.
-    - "renesas,sh73a0-cmt3" for the 32-bit CMT3 device included in sh73a0.
-    - "renesas,sh73a0-cmt4" for the 32-bit CMT4 device included in sh73a0.
-
-    - "renesas,rcar-gen2-cmt0" for 32-bit CMT0 devices included in R-Car Gen2
-		and RZ/G1.
-    - "renesas,rcar-gen2-cmt1" for 48-bit CMT1 devices included in R-Car Gen2
-		and RZ/G1.
-		These are fallbacks for r8a73a4, R-Car Gen2 and RZ/G1 entries
-		listed above.
-    - "renesas,rcar-gen3-cmt0" for 32-bit CMT0 devices included in R-Car Gen3
-		and RZ/G2.
-    - "renesas,rcar-gen3-cmt1" for 48-bit CMT devices included in R-Car Gen3
-		and RZ/G2.
-		These are fallbacks for R-Car Gen3 and RZ/G2 entries listed
-		above.
-
-  - reg: base address and length of the registers block for the timer module.
-  - interrupts: interrupt-specifier for the timer, one per channel.
-  - clocks: a list of phandle + clock-specifier pairs, one for each entry
-    in clock-names.
-  - clock-names: must contain "fck" for the functional clock.
-
-
-Example: R8A7790 (R-Car H2) CMT0 and CMT1 nodes
-
-	cmt0: timer@ffca0000 {
-		compatible = "renesas,r8a7790-cmt0", "renesas,rcar-gen2-cmt0";
-		reg = <0 0xffca0000 0 0x1004>;
-		interrupts = <0 142 IRQ_TYPE_LEVEL_HIGH>,
-			     <0 142 IRQ_TYPE_LEVEL_HIGH>;
-		clocks = <&mstp1_clks R8A7790_CLK_CMT0>;
-		clock-names = "fck";
-	};
-
-	cmt1: timer@e6130000 {
-		compatible = "renesas,r8a7790-cmt1", "renesas,rcar-gen2-cmt1";
-		reg = <0 0xe6130000 0 0x1004>;
-		interrupts = <0 120 IRQ_TYPE_LEVEL_HIGH>,
-			     <0 121 IRQ_TYPE_LEVEL_HIGH>,
-			     <0 122 IRQ_TYPE_LEVEL_HIGH>,
-			     <0 123 IRQ_TYPE_LEVEL_HIGH>,
-			     <0 124 IRQ_TYPE_LEVEL_HIGH>,
-			     <0 125 IRQ_TYPE_LEVEL_HIGH>,
-			     <0 126 IRQ_TYPE_LEVEL_HIGH>,
-			     <0 127 IRQ_TYPE_LEVEL_HIGH>;
-		clocks = <&mstp3_clks R8A7790_CLK_CMT1>;
-		clock-names = "fck";
-	};
diff --git a/Documentation/devicetree/bindings/timer/renesas,cmt.yaml b/Documentation/devicetree/bindings/timer/renesas,cmt.yaml
new file mode 100644
index 000000000000..7e4dc5623da8
--- /dev/null
+++ b/Documentation/devicetree/bindings/timer/renesas,cmt.yaml
@@ -0,0 +1,182 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/timer/renesas,cmt.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Renesas Compare Match Timer (CMT)
+
+maintainers:
+  - Geert Uytterhoeven <geert+renesas@glider.be>
+  - Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
+
+description:
+  The CMT is a multi-channel 16/32/48-bit timer/counter with configurable clock
+  inputs and programmable compare match.
+
+  Channels share hardware resources but their counter and compare match values
+  are independent. A particular CMT instance can implement only a subset of the
+  channels supported by the CMT model. Channel indices represent the hardware
+  position of the channel in the CMT and don't match the channel numbers in the
+  datasheets.
+
+properties:
+  compatible:
+    oneOf:
+      - items:
+          - enum:
+              - renesas,r8a7740-cmt0      # 32-bit CMT0 on R-Mobile A1
+              - renesas,r8a7740-cmt1      # 48-bit CMT1 on R-Mobile A1
+              - renesas,r8a7740-cmt2      # 32-bit CMT2 on R-Mobile A1
+              - renesas,r8a7740-cmt3      # 32-bit CMT3 on R-Mobile A1
+              - renesas,r8a7740-cmt4      # 32-bit CMT4 on R-Mobile A1
+              - renesas,sh73a0-cmt0       # 32-bit CMT0 on SH-Mobile AG5
+              - renesas,sh73a0-cmt1       # 48-bit CMT1 on SH-Mobile AG5
+              - renesas,sh73a0-cmt2       # 32-bit CMT2 on SH-Mobile AG5
+              - renesas,sh73a0-cmt3       # 32-bit CMT3 on SH-Mobile AG5
+              - renesas,sh73a0-cmt4       # 32-bit CMT4 on SH-Mobile AG5
+
+      - items:
+          - enum:
+              - renesas,r8a73a4-cmt0      # 32-bit CMT0 on R-Mobile APE6
+              - renesas,r8a7743-cmt0      # 32-bit CMT0 on RZ/G1M
+              - renesas,r8a7744-cmt0      # 32-bit CMT0 on RZ/G1N
+              - renesas,r8a7745-cmt0      # 32-bit CMT0 on RZ/G1E
+              - renesas,r8a77470-cmt0     # 32-bit CMT0 on RZ/G1C
+              - renesas,r8a7790-cmt0      # 32-bit CMT0 on R-Car H2
+              - renesas,r8a7791-cmt0      # 32-bit CMT0 on R-Car M2-W
+              - renesas,r8a7792-cmt0      # 32-bit CMT0 on R-Car V2H
+              - renesas,r8a7793-cmt0      # 32-bit CMT0 on R-Car M2-N
+              - renesas,r8a7794-cmt0      # 32-bit CMT0 on R-Car E2
+          - const: renesas,rcar-gen2-cmt0 # 32-bit CMT0 on R-Mobile APE6, R-Car Gen2 and RZ/G1
+
+      - items:
+          - enum:
+              - renesas,r8a73a4-cmt1      # 48-bit CMT1 on R-Mobile APE6
+              - renesas,r8a7743-cmt1      # 48-bit CMT1 on RZ/G1M
+              - renesas,r8a7744-cmt1      # 48-bit CMT1 on RZ/G1N
+              - renesas,r8a7745-cmt1      # 48-bit CMT1 on RZ/G1E
+              - renesas,r8a77470-cmt1     # 48-bit CMT1 on RZ/G1C
+              - renesas,r8a7790-cmt1      # 48-bit CMT1 on R-Car H2
+              - renesas,r8a7791-cmt1      # 48-bit CMT1 on R-Car M2-W
+              - renesas,r8a7792-cmt1      # 48-bit CMT1 on R-Car V2H
+              - renesas,r8a7793-cmt1      # 48-bit CMT1 on R-Car M2-N
+              - renesas,r8a7794-cmt1      # 48-bit CMT1 on R-Car E2
+          - const: renesas,rcar-gen2-cmt1 # 48-bit CMT1 on R-Mobile APE6, R-Car Gen2 and RZ/G1
+
+      - items:
+          - enum:
+              - renesas,r8a774a1-cmt0     # 32-bit CMT0 on RZ/G2M
+              - renesas,r8a774b1-cmt0     # 32-bit CMT0 on RZ/G2N
+              - renesas,r8a774c0-cmt0     # 32-bit CMT0 on RZ/G2E
+              - renesas,r8a7795-cmt0      # 32-bit CMT0 on R-Car H3
+              - renesas,r8a7796-cmt0      # 32-bit CMT0 on R-Car M3-W
+              - renesas,r8a77965-cmt0     # 32-bit CMT0 on R-Car M3-N
+              - renesas,r8a77970-cmt0     # 32-bit CMT0 on R-Car V3M
+              - renesas,r8a77980-cmt0     # 32-bit CMT0 on R-Car V3H
+              - renesas,r8a77990-cmt0     # 32-bit CMT0 on R-Car E3
+              - renesas,r8a77995-cmt0     # 32-bit CMT0 on R-Car D3
+          - const: renesas,rcar-gen3-cmt0 # 32-bit CMT0 on R-Car Gen3 and RZ/G2
+
+      - items:
+          - enum:
+              - renesas,r8a774a1-cmt1     # 48-bit CMT on RZ/G2M
+              - renesas,r8a774b1-cmt1     # 48-bit CMT on RZ/G2N
+              - renesas,r8a774c0-cmt1     # 48-bit CMT on RZ/G2E
+              - renesas,r8a7795-cmt1      # 48-bit CMT on R-Car H3
+              - renesas,r8a7796-cmt1      # 48-bit CMT on R-Car M3-W
+              - renesas,r8a77965-cmt1     # 48-bit CMT on R-Car M3-N
+              - renesas,r8a77970-cmt1     # 48-bit CMT on R-Car V3M
+              - renesas,r8a77980-cmt1     # 48-bit CMT on R-Car V3H
+              - renesas,r8a77990-cmt1     # 48-bit CMT on R-Car E3
+              - renesas,r8a77995-cmt1     # 48-bit CMT on R-Car D3
+          - const: renesas,rcar-gen3-cmt1 # 48-bit CMT on R-Car Gen3 and RZ/G2
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    minItems: 1
+    maxItems: 8
+
+  clocks:
+    maxItems: 1
+
+  clock-names:
+    const: fck
+
+  power-domains:
+    maxItems: 1
+
+  resets:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+  - clock-names
+  - power-domains
+
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - renesas,rcar-gen2-cmt0
+              - renesas,rcar-gen3-cmt0
+    then:
+      properties:
+        interrupts:
+          minItems: 2
+          maxItems: 2
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - renesas,rcar-gen2-cmt1
+              - renesas,rcar-gen3-cmt1
+    then:
+      properties:
+        interrupts:
+          minItems: 8
+          maxItems: 8
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/r8a7790-cpg-mssr.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/power/r8a7790-sysc.h>
+    cmt0: timer@ffca0000 {
+            compatible = "renesas,r8a7790-cmt0", "renesas,rcar-gen2-cmt0";
+            reg = <0xffca0000 0x1004>;
+            interrupts = <GIC_SPI 142 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 143 IRQ_TYPE_LEVEL_HIGH>;
+            clocks = <&cpg CPG_MOD 124>;
+            clock-names = "fck";
+            power-domains = <&sysc R8A7790_PD_ALWAYS_ON>;
+            resets = <&cpg 124>;
+    };
+
+    cmt1: timer@e6130000 {
+            compatible = "renesas,r8a7790-cmt1", "renesas,rcar-gen2-cmt1";
+            reg = <0xe6130000 0x1004>;
+            interrupts = <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 122 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 124 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 125 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 126 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 127 IRQ_TYPE_LEVEL_HIGH>;
+            clocks = <&cpg CPG_MOD 329>;
+            clock-names = "fck";
+            power-domains = <&sysc R8A7790_PD_ALWAYS_ON>;
+            resets = <&cpg 329>;
+    };
diff --git a/Documentation/devicetree/bindings/timer/renesas,mtu2.txt b/Documentation/devicetree/bindings/timer/renesas,mtu2.txt
deleted file mode 100644
index ba0a34d97eb8..000000000000
--- a/Documentation/devicetree/bindings/timer/renesas,mtu2.txt
+++ /dev/null
@@ -1,42 +0,0 @@
-* Renesas Multi-Function Timer Pulse Unit 2 (MTU2)
-
-The MTU2 is a multi-purpose, multi-channel timer/counter with configurable
-clock inputs and programmable compare match.
-
-Channels share hardware resources but their counter and compare match value
-are independent. The MTU2 hardware supports five channels indexed from 0 to 4.
-
-Required Properties:
-
-  - compatible: must be one or more of the following:
-    - "renesas,mtu2-r7s72100" for the r7s72100 MTU2
-    - "renesas,mtu2" for any MTU2
-      This is a fallback for the above renesas,mtu2-* entries
-
-  - reg: base address and length of the registers block for the timer module.
-
-  - interrupts: interrupt specifiers for the timer, one for each entry in
-    interrupt-names.
-  - interrupt-names: must contain one entry named "tgi?a" for each enabled
-    channel, where "?" is the channel index expressed as one digit from "0" to
-    "4".
-
-  - clocks: a list of phandle + clock-specifier pairs, one for each entry
-    in clock-names.
-  - clock-names: must contain "fck" for the functional clock.
-
-
-Example: R7S72100 (RZ/A1H) MTU2 node
-
-	mtu2: timer@fcff0000 {
-		compatible = "renesas,mtu2-r7s72100", "renesas,mtu2";
-		reg = <0xfcff0000 0x400>;
-		interrupts = <0 139 IRQ_TYPE_LEVEL_HIGH>,
-			     <0 146 IRQ_TYPE_LEVEL_HIGH>,
-			     <0 150 IRQ_TYPE_LEVEL_HIGH>,
-			     <0 154 IRQ_TYPE_LEVEL_HIGH>,
-			     <0 159 IRQ_TYPE_LEVEL_HIGH>;
-		interrupt-names = "tgi0a", "tgi1a", "tgi2a", "tgi3a", "tgi4a";
-		clocks = <&mstp3_clks R7S72100_CLK_MTU2>;
-		clock-names = "fck";
-	};
diff --git a/Documentation/devicetree/bindings/timer/renesas,mtu2.yaml b/Documentation/devicetree/bindings/timer/renesas,mtu2.yaml
new file mode 100644
index 000000000000..15d8dddf4ae9
--- /dev/null
+++ b/Documentation/devicetree/bindings/timer/renesas,mtu2.yaml
@@ -0,0 +1,76 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/timer/renesas,mtu2.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Renesas Multi-Function Timer Pulse Unit 2 (MTU2)
+
+maintainers:
+  - Geert Uytterhoeven <geert+renesas@glider.be>
+  - Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
+
+description:
+  The MTU2 is a multi-purpose, multi-channel timer/counter with configurable clock inputs
+  and programmable compare match.
+
+  Channels share hardware resources but their counter and compare match value are
+  independent. The MTU2 hardware supports five channels indexed from 0 to 4.
+
+properties:
+  compatible:
+    items:
+      - enum:
+          - renesas,mtu2-r7s72100 # RZ/A1H
+      - const: renesas,mtu2
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    minItems: 1
+    maxItems: 5
+    description: One entry for each enabled channel.
+
+  interrupt-names:
+    minItems: 1
+    items:
+      - const: tgi0a
+      - const: tgi1a
+      - const: tgi2a
+      - const: tgi3a
+      - const: tgi4a
+
+  clocks:
+    maxItems: 1
+
+  clock-names:
+    const: fck
+
+  power-domains:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - interrupt-names
+  - clocks
+  - clock-names
+  - power-domains
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/r7s72100-clock.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    mtu2: timer@fcff0000 {
+            compatible = "renesas,mtu2-r7s72100", "renesas,mtu2";
+            reg = <0xfcff0000 0x400>;
+            interrupts = <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>;
+            interrupt-names = "tgi0a";
+            clocks = <&mstp3_clks R7S72100_CLK_MTU2>;
+            clock-names = "fck";
+            power-domains = <&cpg_clocks>;
+    };
diff --git a/Documentation/devicetree/bindings/timer/renesas,ostm.txt b/Documentation/devicetree/bindings/timer/renesas,ostm.txt
deleted file mode 100644
index 81a78f8bcf17..000000000000
--- a/Documentation/devicetree/bindings/timer/renesas,ostm.txt
+++ /dev/null
@@ -1,31 +0,0 @@
-* Renesas OS Timer (OSTM)
-
-The OSTM is a multi-channel 32-bit timer/counter with fixed clock
-source that can operate in either interval count down timer or free-running
-compare match mode.
-
-Channels are independent from each other.
-
-Required Properties:
-
-  - compatible: must be one or more of the following:
-    - "renesas,r7s72100-ostm" for the R7S72100 (RZ/A1) OSTM
-    - "renesas,r7s9210-ostm" for the R7S9210 (RZ/A2) OSTM
-    - "renesas,ostm" for any OSTM
-		This is a fallback for the above renesas,*-ostm entries
-
-  - reg: base address and length of the register block for a timer channel.
-
-  - interrupts: interrupt specifier for the timer channel.
-
-  - clocks: clock specifier for the timer channel.
-
-Example: R7S72100 (RZ/A1H) OSTM node
-
-	ostm0: timer@fcfec000 {
-		compatible = "renesas,r7s72100-ostm", "renesas,ostm";
-		reg = <0xfcfec000 0x30>;
-		interrupts = <GIC_SPI 102 IRQ_TYPE_EDGE_RISING>;
-		clocks = <&mstp5_clks R7S72100_CLK_OSTM0>;
-		power-domains = <&cpg_clocks>;
-	};
diff --git a/Documentation/devicetree/bindings/timer/renesas,ostm.yaml b/Documentation/devicetree/bindings/timer/renesas,ostm.yaml
new file mode 100644
index 000000000000..600d47ab7d58
--- /dev/null
+++ b/Documentation/devicetree/bindings/timer/renesas,ostm.yaml
@@ -0,0 +1,59 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/timer/renesas,ostm.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Renesas OS Timer (OSTM)
+
+maintainers:
+  - Chris Brandt <chris.brandt@renesas.com>
+  - Geert Uytterhoeven <geert+renesas@glider.be>
+
+description:
+  The OSTM is a multi-channel 32-bit timer/counter with fixed clock source that
+  can operate in either interval count down timer or free-running compare match
+  mode.
+
+  Channels are independent from each other.
+
+properties:
+  compatible:
+    items:
+      - enum:
+          - renesas,r7s72100-ostm # RZ/A1H
+          - renesas,r7s9210-ostm  # RZ/A2M
+      - const: renesas,ostm       # Generic
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  power-domains:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+  - power-domains
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/r7s72100-clock.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    ostm0: timer@fcfec000 {
+            compatible = "renesas,r7s72100-ostm", "renesas,ostm";
+            reg = <0xfcfec000 0x30>;
+            interrupts = <GIC_SPI 102 IRQ_TYPE_EDGE_RISING>;
+            clocks = <&mstp5_clks R7S72100_CLK_OSTM0>;
+            power-domains = <&cpg_clocks>;
+    };