Merge tag 'devicetree-for-5.10' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux

Pull devicetree updates from Rob Herring:

 - Update dtc to upstream version v1.6.0-31-gcbca977ea121

 - dtx_diff help text reformatting

 - Speed-up validation time for binding and dtb checks using json for
   intermediate files

 - Add support for running yamllint on DT schema files

 - Remove old booting-without-of.rst

 - Extend the example schema to address common issues

 - Cleanup handling of additionalProperties/unevaluatedProperties

 - Ensure all DSI controller schemas reference dsi-controller.yaml

 - Vendor prefixes for Zealz, Wandbord/Technexion, Embest RIoT, Rex,
   DFI, and Cisco Meraki

 - Convert at25, SPMI bus, TI hwlock, HiSilicon Hi3660 USB3 PHY, Arm
   SP805 watchdog, Arm SP804, and Samsung 11-pin USB connector to DT
   schema

 - Convert HiSilicon SoC and syscon bindings to DT schema

 - Convert SiFive Risc-V L2 cache, PLIC, PRCI, and PWM to DT schema

 - Convert i.MX bindings for w1, crypto, rng, SIM, PM, DDR, SATA, vf610
   GPIO, and UART to DT schema

 - Add i.MX 8M compatible strings

 - Add LM81 and DS1780 as trivial devices

 - Various missing properties added to fix dtb validation warnings

* tag 'devicetree-for-5.10' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: (111 commits)
  dt-bindings: misc: explicitly add #address-cells for slave mode
  spi: dt-bindings: spi-controller: explicitly require #address-cells=<0> for slave mode
  dt: Remove booting-without-of.rst
  dt-bindings: update usb-c-connector example
  dt-bindings: arm: hisilicon: add missing properties into cpuctrl.yaml
  dt-bindings: arm: hisilicon: add missing properties into sysctrl.yaml
  dt-bindings: pwm: imx: document i.MX compatibles
  scripts/dtc: Update to upstream version v1.6.0-31-gcbca977ea121
  dt-bindings: Add running yamllint to dt_binding_check
  dt-bindings: powerpc: Add a schema for the 'sleep' property
  dt-bindings: pinctrl: sirf: Fix typo abitrary
  dt-bindings: pinctrl: qcom: Fix typo abitrary
  dt-bindings: Explicitly allow additional properties in common schemas
  dt-bindings: Use 'additionalProperties' instead of 'unevaluatedProperties'
  dt-bindings: Add missing 'unevaluatedProperties'
  Docs: Fixing spelling errors in Documentation/devicetree/bindings/
  dt-bindings: arm: hisilicon: convert Hi6220 domain controller bindings to json-schema
  dt-bindings: riscv: convert pwm bindings to json-schema
  dt-bindings: riscv: convert plic bindings to json-schema
  dt-bindings: fu540: prci: convert PRCI bindings to json-schema
  ...

1 files changed, 97 insertions, 0 deletions

diff --git a/Documentation/devicetree/bindings/timer/arm,sp804.yaml b/Documentation/devicetree/bindings/timer/arm,sp804.yaml
new file mode 100644
index 000000000000..e35d3053250a
--- /dev/null
+++ b/Documentation/devicetree/bindings/timer/arm,sp804.yaml
@@ -0,0 +1,97 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/timer/arm,sp804.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: ARM sp804 Dual Timers
+
+maintainers:
+  - Haojian Zhuang <haojian.zhuang@linaro.org>
+
+description: |+
+  The Arm SP804 IP implements two independent timers, configurable for
+  16 or 32 bit operation and capable of running in one-shot, periodic, or
+  free-running mode. The input clock is shared, but can be gated and prescaled
+  independently for each timer.
+
+  There is a viriant of Arm SP804: Hisilicon 64-bit SP804 timer. Some Hisilicon
+  SoCs, such as Hi1212, should use the dedicated compatible: "hisilicon,sp804".
+
+# Need a custom select here or 'arm,primecell' will match on lots of nodes
+select:
+  properties:
+    compatible:
+      contains:
+        oneOf:
+          - const: arm,sp804
+          - const: hisilicon,sp804
+  required:
+    - compatible
+
+properties:
+  compatible:
+    items:
+      - enum:
+        - arm,sp804
+        - hisilicon,sp804
+      - const: arm,primecell
+
+  interrupts:
+    description: |
+      If two interrupts are listed, those are the interrupts for timer
+      1 and 2, respectively. If there is only a single interrupt, it is
+      either a combined interrupt or the sole interrupt of one timer, as
+      specified by the "arm,sp804-has-irq" property.
+    minItems: 1
+    maxItems: 2
+
+  reg:
+    description: The physical base address of the SP804 IP.
+    maxItems: 1
+
+  clocks:
+    description: |
+      Clocks driving the dual timer hardware. This list should
+      be 1 or 3 clocks. With 3 clocks, the order is timer0 clock, timer1
+      clock, apb_pclk. A single clock can also be specified if the same
+      clock is used for all clock inputs.
+    oneOf:
+      - items:
+        - description: clock for timer 1
+        - description: clock for timer 2
+        - description: bus clock
+      - items:
+        - description: unified clock for both timers and the bus
+
+  clock-names: true
+    # The original binding did not specify any clock names, and there is no
+    # consistent naming used in the existing DTs. The primecell binding
+    # requires the "apb_pclk" name, so we need this property.
+    # Use "timer0clk", "timer1clk", "apb_pclk" for new DTs.
+
+  arm,sp804-has-irq:
+    description: If only one interrupt line is connected to the interrupt
+      controller, this property specifies which timer is connected to this
+      line.
+    $ref: /schemas/types.yaml#/definitions/uint32
+    minimum: 1
+    maximum: 2
+
+required:
+  - compatible
+  - interrupts
+  - reg
+  - clocks
+
+additionalProperties: false
+
+examples:
+  - |
+    timer0: timer@fc800000 {
+        compatible = "arm,sp804", "arm,primecell";
+        reg = <0xfc800000 0x1000>;
+        interrupts = <0 0 4>, <0 1 4>;
+        clocks = <&timclk1>, <&timclk2>, <&pclk>;
+        clock-names = "timer1", "timer2", "apb_pclk";
+    };