Merge tag 'drivers-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

Pull ARM SoC driver updates from Arnd Bergmann:
 "These are changes for drivers that are intimately tied to some SoC and
  for some reason could not get merged through the respective subsystem
  maintainer tree.

  Most of the new code is for the Keystone Navigator driver, which is
  new base support that is going to be needed for their hardware
  accelerated network driver and other units.

  Most of the commits are for moving old code around from at91 and omap
  for things that are done in device drivers nowadays.

   - at91: move reset, poweroff, memory and clocksource code into
     drivers directories
   - socfpga: add edac driver (through arm-soc, as requested by Boris)
   - omap: move omap-intc code to drivers/irqchip
   - sunxi: added an RTC driver for sun6i
   - omap: mailbox driver related changes
   - keystone: support for the "Navigator" component
   - versatile: new reboot, led and soc drivers"

* tag 'drivers-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (92 commits)
  bus: arm-ccn: Fix spurious warning message
  leds: add device tree bindings for register bit LEDs
  soc: add driver for the ARM RealView
  power: reset: driver for the Versatile syscon reboot
  leds: add a driver for syscon-based LEDs
  drivers/soc: ti: fix build break with modules
  MAINTAINERS: Add Keystone Multicore Navigator drivers entry
  soc: ti: add Keystone Navigator DMA support
  Documentation: dt: soc: add Keystone Navigator DMA bindings
  soc: ti: add Keystone Navigator QMSS driver
  Documentation: dt: soc: add Keystone Navigator QMSS bindings
  rtc: sunxi: Depend on platforms sun4i/sun7i that actually have the rtc
  rtc: sun6i: Add sun6i RTC driver
  irqchip: omap-intc: remove unnecessary comments
  irqchip: omap-intc: correct maximum number or MIR registers
  irqchip: omap-intc: enable TURBO idle mode
  irqchip: omap-intc: enable IP protection
  irqchip: omap-intc: remove unnecesary of_address_to_resource() call
  irqchip: omap-intc: comment style cleanup
  irqchip: omap-intc: minor improvement to omap_irq_pending()
  ...

1 files changed, 111 insertions, 0 deletions

diff --git a/Documentation/devicetree/bindings/soc/ti/keystone-navigator-dma.txt b/Documentation/devicetree/bindings/soc/ti/keystone-navigator-dma.txt
new file mode 100644
index 000000000000..337c4ea5c57b
--- /dev/null
+++ b/Documentation/devicetree/bindings/soc/ti/keystone-navigator-dma.txt
@@ -0,0 +1,111 @@
+Keystone Navigator DMA Controller
+
+This document explains the device tree bindings for the packet dma
+on keystone devices. The Keystone Navigator DMA driver sets up the dma
+channels and flows for the QMSS(Queue Manager SubSystem) who triggers
+the actual data movements across clients using destination queues. Every
+client modules like  NETCP(Network Coprocessor), SRIO(Serial Rapid IO),
+CRYPTO Engines etc has its own instance of dma hardware. QMSS has also
+an internal packet DMA module which is used as an infrastructure DMA
+with zero copy.
+
+Navigator DMA cloud layout:
+	------------------
+	| Navigator DMAs |
+	------------------
+		|
+		|-> DMA instance #0
+		|
+		|-> DMA instance #1
+			.
+			.
+		|
+		|-> DMA instance #n
+
+Navigator DMA properties:
+Required properties:
+ - compatible: Should be "ti,keystone-navigator-dma"
+ - clocks: phandle to dma instances clocks. The clock handles can be as
+	many as the dma instances. The order should be maintained as per
+	the dma instances.
+ - ti,navigator-cloud-address: Should contain base address for the multi-core
+	navigator cloud and number of addresses depends on SOC integration
+	configuration.. Navigator cloud global address needs to be programmed
+	into DMA and the DMA uses it as the physical addresses to reach queue
+	managers. Note that these addresses though points to queue managers,
+	they are relevant only from DMA perspective. The QMSS may not choose to
+	use them since it has a different address space view to reach all
+	its components.
+
+DMA instance properties:
+Required properties:
+ - reg: Should contain register location and length of the following dma
+	register regions. Register regions should be specified in the following
+	order.
+	- Global control register region (global).
+	- Tx DMA channel configuration register region (txchan).
+	- Rx DMA channel configuration register region (rxchan).
+	- Tx DMA channel Scheduler configuration register region (txsched).
+	- Rx DMA flow configuration register region (rxflow).
+
+Optional properties:
+ - reg-names: Names for the register regions.
+ - ti,enable-all: Enable all DMA channels vs clients opening specific channels
+	what they need. This property is useful for the userspace fast path
+	case where the linux drivers enables the channels used by userland
+	stack.
+ - ti,loop-back: To loopback Tx streaming I/F to Rx streaming I/F. Used for
+	      infrastructure transfers.
+ - ti,rx-retry-timeout: Number of dma cycles to wait before retry on buffer
+		     starvation.
+
+Example:
+
+	knav_dmas: knav_dmas@0 {
+		compatible = "ti,keystone-navigator-dma";
+		clocks = <&papllclk>, <&clkxge>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+		ti,navigator-cloud-address = <0x23a80000 0x23a90000
+					   0x23aa0000 0x23ab0000>;
+
+		dma_gbe: dma_gbe@0 {
+			reg = <0x2004000 0x100>,
+				  <0x2004400 0x120>,
+				  <0x2004800 0x300>,
+				  <0x2004c00 0x120>,
+				  <0x2005000 0x400>;
+			reg-names = "global", "txchan", "rxchan",
+					"txsched", "rxflow";
+		};
+
+		dma_xgbe: dma_xgbe@0 {
+			reg = <0x2fa1000 0x100>,
+				<0x2fa1400 0x200>,
+				<0x2fa1800 0x200>,
+				<0x2fa1c00 0x200>,
+				<0x2fa2000 0x400>;
+			reg-names = "global", "txchan", "rxchan",
+					"txsched", "rxflow";
+		};
+	};
+
+Navigator DMA client:
+Required properties:
+ - ti,navigator-dmas: List of one or more DMA specifiers, each consisting of
+			- A phandle pointing to DMA instance node
+			- A DMA channel number as a phandle arg.
+ - ti,navigator-dma-names: Contains dma channel name for each DMA specifier in
+			the 'ti,navigator-dmas' property.
+
+Example:
+
+	netcp: netcp@2090000 {
+		..
+		ti,navigator-dmas = <&dma_gbe 22>,
+				<&dma_gbe 23>,
+				<&dma_gbe 8>;
+		ti,navigator-dma-names = "netrx0", "netrx1", "nettx";
+		..
+	};