Merge tag 'armsoc-drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

Pull ARM SoC driver updates from Arnd Bergmann:
 "This branch contains platform-related driver updates for ARM and
  ARM64, these are the areas that bring the changes:

  New drivers:

   - driver support for Renesas R-Car V3M (R8A77970)

   - power management support for Amlogic GX

   - a new driver for the Tegra BPMP thermal sensor

   - a new bus driver for Technologic Systems NBUS

  Changes for subsystems that prefer to merge through arm-soc:

   - the usual updates for reset controller drivers from Philipp Zabel,
     with five added drivers for SoCs in the arc, meson, socfpa,
     uniphier and mediatek families

   - updates to the ARM SCPI and PSCI frameworks, from Sudeep Holla,
     Heiner Kallweit and Lorenzo Pieralisi

  Changes specific to some ARM-based SoC

   - the Freescale/NXP DPAA QBMan drivers from PowerPC can now work on
     ARM as well

   - several changes for power management on Broadcom SoCs

   - various improvements on Qualcomm, Broadcom, Amlogic, Atmel,
     Mediatek

   - minor Cleanups for Samsung, TI OMAP SoCs"

[ NOTE! This doesn't work without the previous ARM SoC device-tree pull,
  because the R8A77970 driver is missing a header file that came from
  that pull.

  The fact that this got merged afterwards only fixes it at this point,
  and bisection of that driver will fail if/when you walk into the
  history of that driver.           - Linus ]

* tag 'armsoc-drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (96 commits)
  soc: amlogic: meson-gx-pwrc-vpu: fix power-off when powered by bootloader
  bus: add driver for the Technologic Systems NBUS
  memory: omap-gpmc: Remove deprecated gpmc_update_nand_reg()
  soc: qcom: remove unused label
  soc: amlogic: gx pm domain: add PM and OF dependencies
  drivers/firmware: psci_checker: Add missing destroy_timer_on_stack()
  dt-bindings: power: add amlogic meson power domain bindings
  soc: amlogic: add Meson GX VPU Domains driver
  soc: qcom: Remote filesystem memory driver
  dt-binding: soc: qcom: Add binding for rmtfs memory
  of: reserved_mem: Accessor for acquiring reserved_mem
  of/platform: Generalize /reserved-memory handling
  soc: mediatek: pwrap: fix fatal compiler error
  soc: mediatek: pwrap: fix compiler errors
  arm64: mediatek: cleanup message for platform selection
  soc: Allow test-building of MediaTek drivers
  soc: mediatek: place Kconfig for all SoC drivers under menu
  soc: mediatek: pwrap: add support for MT7622 SoC
  soc: mediatek: pwrap: add common way for setup CS timing extenstion
  soc: mediatek: pwrap: add MediaTek MT6380 as one slave of pwrap
  ..

3 files changed, 37 insertions, 0 deletions

diff --git a/Documentation/devicetree/bindings/reset/renesas,rst.txt b/Documentation/devicetree/bindings/reset/renesas,rst.txt
index e5a03ffe04fb..a8014f3ab8ba 100644
--- a/Documentation/devicetree/bindings/reset/renesas,rst.txt
+++ b/Documentation/devicetree/bindings/reset/renesas,rst.txt
@@ -26,6 +26,7 @@ Required properties:
 		  - "renesas,r8a7794-rst" (R-Car E2)
 		  - "renesas,r8a7795-rst" (R-Car H3)
 		  - "renesas,r8a7796-rst" (R-Car M3-W)
+		  - "renesas,r8a77970-rst" (R-Car V3M)
 		  - "renesas,r8a77995-rst" (R-Car D3)
   - reg: Address start and address range for the device.
 
diff --git a/Documentation/devicetree/bindings/reset/snps,axs10x-reset.txt b/Documentation/devicetree/bindings/reset/snps,axs10x-reset.txt
new file mode 100644
index 000000000000..32d8435a41df
--- /dev/null
+++ b/Documentation/devicetree/bindings/reset/snps,axs10x-reset.txt
@@ -0,0 +1,33 @@
+Binding for the AXS10x reset controller
+
+This binding describes the ARC AXS10x boards custom IP-block which allows
+to control reset signals of selected peripherals. For example DW GMAC, etc...
+This block is controlled via memory-mapped register (AKA CREG) which
+represents up-to 32 reset lines.
+
+As of today only the following lines are used:
+ - DW GMAC - line 5
+
+This binding uses the common reset binding[1].
+
+[1] Documentation/devicetree/bindings/reset/reset.txt
+
+Required properties:
+- compatible: should be "snps,axs10x-reset".
+- reg: should always contain pair address - length: for creg reset
+  bits register.
+- #reset-cells: from common reset binding; Should always be set to 1.
+
+Example:
+	reset: reset-controller@11220 {
+		compatible = "snps,axs10x-reset";
+		#reset-cells = <1>;
+		reg = <0x11220 0x4>;
+	};
+
+Specifying reset lines connected to IP modules:
+	ethernet@.... {
+		....
+		resets = <&reset 5>;
+		....
+	};
diff --git a/Documentation/devicetree/bindings/reset/uniphier-reset.txt b/Documentation/devicetree/bindings/reset/uniphier-reset.txt
index 68a6f487c409..93efed629900 100644
--- a/Documentation/devicetree/bindings/reset/uniphier-reset.txt
+++ b/Documentation/devicetree/bindings/reset/uniphier-reset.txt
@@ -13,6 +13,7 @@ Required properties:
     "socionext,uniphier-pxs2-reset" - for PXs2/LD6b SoC
     "socionext,uniphier-ld11-reset" - for LD11 SoC
     "socionext,uniphier-ld20-reset" - for LD20 SoC
+    "socionext,uniphier-pxs3-reset" - for PXs3 SoC
 - #reset-cells: should be 1.
 
 Example:
@@ -44,6 +45,7 @@ Required properties:
     "socionext,uniphier-ld11-mio-reset" - for LD11 SoC (MIO)
     "socionext,uniphier-ld11-sd-reset"  - for LD11 SoC (SD)
     "socionext,uniphier-ld20-sd-reset"  - for LD20 SoC
+    "socionext,uniphier-pxs3-sd-reset"  - for PXs3 SoC
 - #reset-cells: should be 1.
 
 Example:
@@ -74,6 +76,7 @@ Required properties:
     "socionext,uniphier-pxs2-peri-reset" - for PXs2/LD6b SoC
     "socionext,uniphier-ld11-peri-reset" - for LD11 SoC
     "socionext,uniphier-ld20-peri-reset" - for LD20 SoC
+    "socionext,uniphier-pxs3-peri-reset" - for PXs3 SoC
 - #reset-cells: should be 1.
 
 Example: