regulator: Update DA9121 dt-bindings

Update bindings for the Dialog Semiconductor DA9121 voltage regulator to
add device variants.
Because several variants have multiple regulators, and to regard potential
to add GPIO support in future, the 'regulators' sub-node is added,
following the precedent set by other multi-regulator devices, including
the DA9211 family. This breaks compatibility with the original submission
by Vincent Whitchurch - but as this is still in for-next, the alignment
could be made before upstreaming occurs.

Signed-off-by: Adam Ward <Adam.Ward.opensource@diasemi.com>
Link: https://lore.kernel.org/r/0606d3ded5fef4c38760246146f197db4ce3a374.1606755367.git.Adam.Ward.opensource@diasemi.com
Signed-off-by: Mark Brown <broonie@kernel.org>

1 files changed, 153 insertions, 11 deletions

diff --git a/Documentation/devicetree/bindings/regulator/dlg,da9121.yaml b/Documentation/devicetree/bindings/regulator/dlg,da9121.yaml
index 2ece46ee1a59..6f2164f7bc57 100644
--- a/Documentation/devicetree/bindings/regulator/dlg,da9121.yaml
+++ b/Documentation/devicetree/bindings/regulator/dlg,da9121.yaml
@@ -7,41 +7,183 @@ $schema: http://devicetree.org/meta-schemas/core.yaml#
 title: Dialog Semiconductor DA9121 voltage regulator
 
 maintainers:
-  - Vincent Whitchurch <vincent.whitchurch@axis.com>
+  - Adam Ward <Adam.Ward.opensource@diasemi.com>
+
+description: |
+  Dialog Semiconductor DA9121 Single-channel 10A double-phase buck converter
+  Dialog Semiconductor DA9122 Double-channel  5A single-phase buck converter
+  Dialog Semiconductor DA9220 Double-channel  3A single-phase buck converter
+  Dialog Semiconductor DA9217 Single-channel  6A double-phase buck converter
+  Dialog Semiconductor DA9130 Single-channel 10A double-phase buck converter
+  Dialog Semiconductor DA9131 Double-channel  5A single-phase buck converter
+  Dialog Semiconductor DA9132 Double-channel  3A single-phase buck converter
+
+  Current limits
+
+  This is PER PHASE, and the current limit setting in the devices reflect
+  that with a maximum 10A limit. Allowing for transients at/near double
+  the rated current, this translates across the device range to per
+  channel figures as so...
+
+                               | DA9121    DA9122     DA9220    DA9217   DA9140
+                               | /DA9130   /DA9131    /DA9132
+    -----------------------------------------------------------------------------
+    Output current / channel   | 10000000   5000000   3000000   6000000  40000000
+    Output current / phase     |  5000000   5000000   3000000   3000000   9500000
+    -----------------------------------------------------------------------------
+    Min regulator-min-microvolt|   300000    300000    300000    300000    500000
+    Max regulator-max-microvolt|  1900000   1900000   1900000   1900000   1000000
+    Device hardware default    |  1000000   1000000   1000000   1000000   1000000
+    -----------------------------------------------------------------------------
+    Min regulator-min-microamp |  7000000   3500000   3500000   7000000  26000000
+    Max regulator-max-microamp | 20000000  10000000   6000000  12000000  78000000
+    Device hardware default    | 15000000   7500000   5500000  11000000  58000000
 
 properties:
+  $nodename:
+    pattern: "pmic@[0-9a-f]{1,2}"
   compatible:
-    const: dlg,da9121
+    enum:
+      - dlg,da9121
+      - dlg,da9122
+      - dlg,da9220
+      - dlg,da9217
+      - dlg,da9130
+      - dlg,da9131
+      - dlg,da9132
+      - dlg,da9140
 
   reg:
     maxItems: 1
+    description: Specifies the I2C slave address.
+
+  interrupts:
+    maxItems: 1
+    description: IRQ line information.
+
+  dlg,irq-polling-delay-passive-ms:
+    $ref: "/schemas/types.yaml#/definitions/uint32"
+    minimum: 1000
+    maximum: 10000
+    description: |
+      Specify the polling period, measured in milliseconds, between interrupt status
+      update checks. Range 1000-10000 ms.
 
-  buck1:
-    description:
-      Initial data for the Buck1 regulator.
-    $ref: "regulator.yaml#"
+  regulators:
     type: object
+    $ref: regulator.yaml#
+    description: |
+      This node defines the settings for the BUCK. The content of the
+      sub-node is defined by the standard binding for regulators; see regulator.yaml.
+      The DA9121 regulator is bound using their names listed below
+      buck1 - BUCK1
+      buck2 - BUCK2       //DA9122, DA9220, DA9131, DA9132 only
 
-additionalProperties: false
+    patternProperties:
+      "^buck([1-2])$":
+        type: object
+        $ref: regulator.yaml#
+
+        properties:
+          regulator-mode:
+            maxItems: 1
+            description: Defined in include/dt-bindings/regulator/dlg,da9121-regulator.h
+
+          regulator-initial-mode:
+            maxItems: 1
+            description: Defined in include/dt-bindings/regulator/dlg,da9121-regulator.h
+
+          enable-gpios:
+            maxItems: 1
+            description: Specify a valid GPIO for platform control of the regulator
+
+          dlg,ripple-cancel:
+            $ref: "/schemas/types.yaml#/definitions/uint32"
+            description: |
+              Defined in include/dt-bindings/regulator/dlg,da9121-regulator.h
+              Only present on multi-channel devices (DA9122, DA9220, DA9131, DA9132)
+
+        unevaluatedProperties: false
 
 required:
   - compatible
   - reg
+  - regulators
+
+additionalProperties: false
 
 examples:
   - |
+    #include <dt-bindings/gpio/gpio.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+    #include <dt-bindings/regulator/dlg,da9121-regulator.h>
     i2c {
       #address-cells = <1>;
       #size-cells = <0>;
-      regulator@68 {
+      pmic@68 {
         compatible = "dlg,da9121";
         reg = <0x68>;
 
-        buck1 {
-          regulator-min-microvolt = <680000>;
-          regulator-max-microvolt = <820000>;
+        interrupt-parent = <&gpio6>;
+        interrupts = <11 IRQ_TYPE_LEVEL_LOW>;
+
+        dlg,irq-polling-delay-passive-ms = <2000>;
+
+        regulators {
+          DA9121_BUCK1: buck1 {
+            regulator-name = "BUCK1";
+            regulator-min-microvolt = <300000>;
+            regulator-max-microvolt = <1900000>;
+            regulator-min-microamp = <7000000>;
+            regulator-max-microamp = <20000000>;
+            regulator-boot-on;
+            regulator-initial-mode = <DA9121_BUCK_MODE_AUTO>;
+            enable-gpios = <&gpio 1 GPIO_ACTIVE_HIGH>;
+          };
         };
       };
     };
 
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+    #include <dt-bindings/regulator/dlg,da9121-regulator.h>
+    i2c {
+      #address-cells = <1>;
+      #size-cells = <0>;
+      pmic@68 {
+        compatible = "dlg,da9122";
+        reg = <0x68>;
+
+        interrupt-parent = <&gpio6>;
+        interrupts = <11 IRQ_TYPE_LEVEL_LOW>;
+
+        dlg,irq-polling-delay-passive-ms = <2000>;
+
+        regulators {
+          DA9122_BUCK1: buck1 {
+            regulator-name = "BUCK1";
+            regulator-min-microvolt = <300000>;
+            regulator-max-microvolt = <1900000>;
+            regulator-min-microamp = <3500000>;
+            regulator-max-microamp = <10000000>;
+            regulator-boot-on;
+            regulator-initial-mode = <DA9121_BUCK_MODE_AUTO>;
+            enable-gpios = <&gpio6 1 GPIO_ACTIVE_HIGH>;
+            dlg,ripple-cancel = <DA9121_BUCK_RIPPLE_CANCEL_NONE>;
+          };
+          DA9122_BUCK2: buck2 {
+            regulator-name = "BUCK2";
+            regulator-min-microvolt = <300000>;
+            regulator-max-microvolt = <1900000>;
+            regulator-min-microamp = <3500000>;
+            regulator-max-microamp = <10000000>;
+            regulator-boot-on;
+            regulator-initial-mode = <DA9121_BUCK_MODE_AUTO>;
+            enable-gpios = <&gpio6 2 GPIO_ACTIVE_HIGH>;
+            dlg,ripple-cancel = <DA9121_BUCK_RIPPLE_CANCEL_NONE>;
+          };
+        };
+      };
+    };
 ...