Merge branch 'master' into for-2.6.39

1 files changed, 198 insertions, 0 deletions

diff --git a/Documentation/devicetree/bindings/powerpc/fsl/mpc5200.txt b/Documentation/devicetree/bindings/powerpc/fsl/mpc5200.txt
new file mode 100644
index 000000000000..4ccb2cd5df94
--- /dev/null
+++ b/Documentation/devicetree/bindings/powerpc/fsl/mpc5200.txt
@@ -0,0 +1,198 @@
+MPC5200 Device Tree Bindings
+----------------------------
+
+(c) 2006-2009 Secret Lab Technologies Ltd
+Grant Likely <grant.likely@secretlab.ca>
+
+Naming conventions
+------------------
+For mpc5200 on-chip devices, the format for each compatible value is
+<chip>-<device>[-<mode>].  The OS should be able to match a device driver
+to the device based solely on the compatible value.  If two drivers
+match on the compatible list; the 'most compatible' driver should be
+selected.
+
+The split between the MPC5200 and the MPC5200B leaves a bit of a
+conundrum.  How should the compatible property be set up to provide
+maximum compatibility information; but still accurately describe the
+chip?  For the MPC5200; the answer is easy.  Most of the SoC devices
+originally appeared on the MPC5200.  Since they didn't exist anywhere
+else; the 5200 compatible properties will contain only one item;
+"fsl,mpc5200-<device>".
+
+The 5200B is almost the same as the 5200, but not quite.  It fixes
+silicon bugs and it adds a small number of enhancements.  Most of the
+devices either provide exactly the same interface as on the 5200.  A few
+devices have extra functions but still have a backwards compatible mode.
+To express this information as completely as possible, 5200B device trees
+should have two items in the compatible list:
+	compatible = "fsl,mpc5200b-<device>","fsl,mpc5200-<device>";
+
+It is *strongly* recommended that 5200B device trees follow this convention
+(instead of only listing the base mpc5200 item).
+
+ie. ethernet on mpc5200: compatible = "fsl,mpc5200-fec";
+    ethernet on mpc5200b: compatible = "fsl,mpc5200b-fec", "fsl,mpc5200-fec";
+
+Modal devices, like PSCs, also append the configured function to the
+end of the compatible field.  ie. A PSC in i2s mode would specify
+"fsl,mpc5200-psc-i2s", not "fsl,mpc5200-i2s".  This convention is chosen to
+avoid naming conflicts with non-psc devices providing the same
+function.  For example, "fsl,mpc5200-spi" and "fsl,mpc5200-psc-spi" describe
+the mpc5200 simple spi device and a PSC spi mode respectively.
+
+At the time of writing, exact chip may be either 'fsl,mpc5200' or
+'fsl,mpc5200b'.
+
+The soc node
+------------
+This node describes the on chip SOC peripherals.  Every mpc5200 based
+board will have this node, and as such there is a common naming
+convention for SOC devices.
+
+Required properties:
+name			description
+----			-----------
+ranges			Memory range of the internal memory mapped registers.
+			Should be <0 [baseaddr] 0xc000>
+reg			Should be <[baseaddr] 0x100>
+compatible		mpc5200: "fsl,mpc5200-immr"
+			mpc5200b: "fsl,mpc5200b-immr"
+system-frequency	'fsystem' frequency in Hz; XLB, IPB, USB and PCI
+			clocks are derived from the fsystem clock.
+bus-frequency		IPB bus frequency in Hz.  Clock rate
+			used by most of the soc devices.
+
+soc child nodes
+---------------
+Any on chip SOC devices available to Linux must appear as soc5200 child nodes.
+
+Note: The tables below show the value for the mpc5200.  A mpc5200b device
+tree should use the "fsl,mpc5200b-<device>","fsl,mpc5200-<device>" form.
+
+Required soc5200 child nodes:
+name				compatible		Description
+----				----------		-----------
+cdm@<addr>			fsl,mpc5200-cdm		Clock Distribution
+interrupt-controller@<addr>	fsl,mpc5200-pic		need an interrupt
+							controller to boot
+bestcomm@<addr>			fsl,mpc5200-bestcomm	Bestcomm DMA controller
+
+Recommended soc5200 child nodes; populate as needed for your board
+name		compatible		Description
+----		----------		-----------
+timer@<addr>	fsl,mpc5200-gpt		 General purpose timers
+gpio@<addr>	fsl,mpc5200-gpio	 MPC5200 simple gpio controller
+gpio@<addr>	fsl,mpc5200-gpio-wkup	 MPC5200 wakeup gpio controller
+rtc@<addr>	fsl,mpc5200-rtc		 Real time clock
+mscan@<addr>	fsl,mpc5200-mscan	 CAN bus controller
+pci@<addr>	fsl,mpc5200-pci		 PCI bridge
+serial@<addr>	fsl,mpc5200-psc-uart	 PSC in serial mode
+i2s@<addr>	fsl,mpc5200-psc-i2s	 PSC in i2s mode
+ac97@<addr>	fsl,mpc5200-psc-ac97	 PSC in ac97 mode
+spi@<addr>	fsl,mpc5200-psc-spi	 PSC in spi mode
+irda@<addr>	fsl,mpc5200-psc-irda	 PSC in IrDA mode
+spi@<addr>	fsl,mpc5200-spi		 MPC5200 spi device
+ethernet@<addr>	fsl,mpc5200-fec		 MPC5200 ethernet device
+ata@<addr>	fsl,mpc5200-ata		 IDE ATA interface
+i2c@<addr>	fsl,mpc5200-i2c		 I2C controller
+usb@<addr>	fsl,mpc5200-ohci,ohci-be USB controller
+xlb@<addr>	fsl,mpc5200-xlb		 XLB arbitrator
+
+fsl,mpc5200-gpt nodes
+---------------------
+On the mpc5200 and 5200b, GPT0 has a watchdog timer function.  If the board
+design supports the internal wdt, then the device node for GPT0 should
+include the empty property 'fsl,has-wdt'.  Note that this does not activate
+the watchdog.  The timer will function as a GPT if the timer api is used, and
+it will function as watchdog if the watchdog device is used.  The watchdog
+mode has priority over the gpt mode, i.e. if the watchdog is activated, any
+gpt api call to this timer will fail with -EBUSY.
+
+If you add the property
+	fsl,wdt-on-boot = <n>;
+GPT0 will be marked as in-use watchdog, i.e. blocking every gpt access to it.
+If n>0, the watchdog is started with a timeout of n seconds.  If n=0, the
+configuration of the watchdog is not touched.  This is useful in two cases:
+- just mark GPT0 as watchdog, blocking gpt accesses, and configure it later;
+- do not touch a configuration assigned by the boot loader which supervises
+  the boot process itself.
+
+The watchdog will respect the CONFIG_WATCHDOG_NOWAYOUT option.
+
+An mpc5200-gpt can be used as a single line GPIO controller.  To do so,
+add the following properties to the gpt node:
+	gpio-controller;
+	#gpio-cells = <2>;
+When referencing the GPIO line from another node, the first cell must always
+be zero and the second cell represents the gpio flags and described in the
+gpio device tree binding.
+
+An mpc5200-gpt can be used as a single line edge sensitive interrupt
+controller.  To do so, add the following properties to the gpt node:
+	interrupt-controller;
+	#interrupt-cells = <1>;
+When referencing the IRQ line from another node, the cell represents the
+sense mode; 1 for edge rising, 2 for edge falling.
+
+fsl,mpc5200-psc nodes
+---------------------
+The PSCs should include a cell-index which is the index of the PSC in
+hardware.  cell-index is used to determine which shared SoC registers to
+use when setting up PSC clocking.  cell-index number starts at '0'.  ie:
+	PSC1 has 'cell-index = <0>'
+	PSC4 has 'cell-index = <3>'
+
+PSC in i2s mode:  The mpc5200 and mpc5200b PSCs are not compatible when in
+i2s mode.  An 'mpc5200b-psc-i2s' node cannot include 'mpc5200-psc-i2s' in the
+compatible field.
+
+
+fsl,mpc5200-gpio and fsl,mpc5200-gpio-wkup nodes
+------------------------------------------------
+Each GPIO controller node should have the empty property gpio-controller and
+#gpio-cells set to 2. First cell is the GPIO number which is interpreted
+according to the bit numbers in the GPIO control registers. The second cell
+is for flags which is currently unused.
+
+fsl,mpc5200-fec nodes
+---------------------
+The FEC node can specify one of the following properties to configure
+the MII link:
+- fsl,7-wire-mode - An empty property that specifies the link uses 7-wire
+                    mode instead of MII
+- current-speed   - Specifies that the MII should be configured for a fixed
+                    speed.  This property should contain two cells.  The
+                    first cell specifies the speed in Mbps and the second
+                    should be '0' for half duplex and '1' for full duplex
+- phy-handle      - Contains a phandle to an Ethernet PHY.
+
+Interrupt controller (fsl,mpc5200-pic) node
+-------------------------------------------
+The mpc5200 pic binding splits hardware IRQ numbers into two levels.  The
+split reflects the layout of the PIC hardware itself, which groups
+interrupts into one of three groups; CRIT, MAIN or PERP.  Also, the
+Bestcomm dma engine has it's own set of interrupt sources which are
+cascaded off of peripheral interrupt 0, which the driver interprets as a
+fourth group, SDMA.
+
+The interrupts property for device nodes using the mpc5200 pic consists
+of three cells; <L1 L2 level>
+
+    L1 := [CRIT=0, MAIN=1, PERP=2, SDMA=3]
+    L2 := interrupt number; directly mapped from the value in the
+          "ICTL PerStat, MainStat, CritStat Encoded Register"
+    level := [LEVEL_HIGH=0, EDGE_RISING=1, EDGE_FALLING=2, LEVEL_LOW=3]
+
+For external IRQs, use the following interrupt property values (how to
+specify external interrupts is a frequently asked question):
+External interrupts:
+	external irq0:	interrupts = <0 0 n>;
+	external irq1:	interrupts = <1 1 n>;
+	external irq2:	interrupts = <1 2 n>;
+	external irq3:	interrupts = <1 3 n>;
+'n' is sense (0: level high, 1: edge rising, 2: edge falling 3: level low)
+
+fsl,mpc5200-mscan nodes
+-----------------------
+See file can.txt in this directory.