power/supply: unify DT documentation

Currently the power supply device tree documentation is spread
in .../bindings/power_supply and .../bindings/power. This
unifies the files for chargers and battery fuel gauges in
.../bindings/power/supply and the ones for system reset/shutdown
in .../bindings/power/reset (same structure as used for the
drivers itself).

Signed-off-by: Sebastian Reichel <sre@kernel.org>

1 files changed, 30 insertions, 0 deletions

diff --git a/Documentation/devicetree/bindings/power/supply/twl-charger.txt b/Documentation/devicetree/bindings/power/supply/twl-charger.txt
new file mode 100644
index 000000000000..3b4ea1b73b38
--- /dev/null
+++ b/Documentation/devicetree/bindings/power/supply/twl-charger.txt
@@ -0,0 +1,30 @@
+TWL BCI (Battery Charger Interface)
+
+The battery charger needs to interact with the USB phy in order
+to know when charging is permissible, and when there is a connection
+or disconnection.
+
+The choice of phy cannot be configured at a hardware level, so there
+is no value in explicit configuration in device-tree.  Rather
+if there is a sibling of the BCI node which is compatible with
+"ti,twl4030-usb", then that is used to determine when and how
+use USB power for charging.
+
+Required properties:
+- compatible:
+  - "ti,twl4030-bci"
+- interrupts: two interrupt lines from the TWL SIH (secondary
+  interrupt handler) - interrupts 9 and 2.
+
+Optional properties:
+- ti,bb-uvolt: microvolts for charging the backup battery.
+- ti,bb-uamp: microamps for charging the backup battery.
+
+Examples:
+
+bci {
+   compatible = "ti,twl4030-bci";
+   interrupts = <9>, <2>;
+   ti,bb-uvolt = <3200000>;
+   ti,bb-uamp = <150>;
+};