Merge tag 'mfd-next-5.9-1' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd

Pull MFD updates from Lee Jones:
 "Core Frameworks
   - Make better attempt at matching device with the correct OF node
   - Allow batch removal of hierarchical sub-devices

  New Drivers
   - Add STM32 Clocksource driver
   - Add support for Khadas System Control Microcontroller

  Driver Removal
   - Remove unused driver for TI's SMSC ECE1099

  New Device Support
   - Add support for Intel Emmitsburg PCH to Intel LPSS PCI
   - Add support for Intel Tiger Lake PCH-H to Intel LPSS PCI
   - Add support for Dialog DA revision to Dialog DA9063

  New Functionality
   - Add support for AXP803 to be probed by I2C

  Fix-ups
   - Numerous W=1 warning fixes
   - Device Tree changes (stm32-lptimer, gateworks-gsc, khadas,mcu, stmfx, cros-ec, j721e-system-controller)
   - Enabled Regmap 'fast I/O' in stm32-lptimer
   - Change BUG_ON to WARN_ON in arizona-core
   - Remove superfluous code/initialisation (madera, max14577)
   - Trivial formatting/spelling issues (madera-core, madera-i2c, da9055, max77693-private)
   - Switch to of_platform_populate() in sprd-sc27xx-spi
   - Expand out set/get brightness/pwm macros in lm3533-ctrlbank
   - Disable IRQs on suspend in motorola-cpcap
   - Clean-up error handling in intel_soc_pmic_mrfld
   - Ensure correct removal order of sub-devices in madera
   - Many s/HTTP/HTTPS/ link changes
   - Ensure name used with Regmap is unique in syscon

  Bug Fixes
   - Properly 'put' clock on unbind and error in arizona-core
   - Fix revision handling in da9063
   - Fix 'assignment of read-only location' error in kempld-core
   - Avoid using the Regmap API when atomic in rn5t618
   - Redefine volatile register description in rn5t618
   - Use locking to protect event handler in dln2"

* tag 'mfd-next-5.9-1' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd: (76 commits)
  mfd: syscon: Use a unique name with regmap_config
  mfd: Replace HTTP links with HTTPS ones
  mfd: dln2: Run event handler loop under spinlock
  mfd: madera: Improve handling of regulator unbinding
  mfd: mfd-core: Add mechanism for removal of a subset of children
  mfd: intel_soc_pmic_mrfld: Simplify the return expression of intel_scu_ipc_dev_iowrite8()
  mfd: max14577: Remove redundant initialization of variable current_bits
  mfd: rn5t618: Fix caching of battery related registers
  mfd: max77693-private: Drop a duplicated word
  mfd: da9055: pdata.h: Drop a duplicated word
  mfd: rn5t618: Make restart handler atomic safe
  mfd: kempld-core: Fix 'assignment of read-only location' error
  mfd: axp20x: Allow the AXP803 to be probed by I2C
  mfd: da9063: Add support for latest DA silicon revision
  mfd: da9063: Fix revision handling to correctly select reg tables
  dt-bindings: mfd: st,stmfx: Remove I2C unit name
  dt-bindings: mfd: ti,j721e-system-controller.yaml: Add J721e system controller
  mfd: motorola-cpcap: Disable interrupt for suspend
  mfd: smsc-ece1099: Remove driver
  mfd: core: Add OF_MFD_CELL_REG() helper
  ...

1 files changed, 0 insertions, 116 deletions

diff --git a/Documentation/devicetree/bindings/pinctrl/pinctrl-stmfx.txt b/Documentation/devicetree/bindings/pinctrl/pinctrl-stmfx.txt
deleted file mode 100644
index c1b4c1819b84..000000000000
--- a/Documentation/devicetree/bindings/pinctrl/pinctrl-stmfx.txt
+++ /dev/null
@@ -1,116 +0,0 @@
-STMicroelectronics Multi-Function eXpander (STMFX) GPIO expander bindings
-
-ST Multi-Function eXpander (STMFX) offers up to 24 GPIOs expansion.
-Please refer to ../mfd/stmfx.txt for STMFX Core bindings.
-
-Required properties:
-- compatible: should be "st,stmfx-0300-pinctrl".
-- #gpio-cells: should be <2>, the first cell is the GPIO number and the second
-  cell is the gpio flags in accordance with <dt-bindings/gpio/gpio.h>.
-- gpio-controller: marks the device as a GPIO controller.
-- #interrupt-cells: should be <2>, the first cell is the GPIO number and the
-  second cell is the interrupt flags in accordance with
-  <dt-bindings/interrupt-controller/irq.h>.
-- interrupt-controller: marks the device as an interrupt controller.
-- gpio-ranges: specifies the mapping between gpio controller and pin
-  controller pins. Check "Concerning gpio-ranges property" below.
-Please refer to ../gpio/gpio.txt.
-
-Please refer to pinctrl-bindings.txt for pin configuration.
-
-Required properties for pin configuration sub-nodes:
-- pins: list of pins to which the configuration applies.
-
-Optional properties for pin configuration sub-nodes (pinconf-generic ones):
-- bias-disable: disable any bias on the pin.
-- bias-pull-up: the pin will be pulled up.
-- bias-pull-pin-default: use the pin-default pull state.
-- bias-pull-down: the pin will be pulled down.
-- drive-open-drain: the pin will be driven with open drain.
-- drive-push-pull: the pin will be driven actively high and low.
-- output-high: the pin will be configured as an output driving high level.
-- output-low: the pin will be configured as an output driving low level.
-
-Note that STMFX pins[15:0] are called "gpio[15:0]", and STMFX pins[23:16] are
-called "agpio[7:0]". Example, to refer to pin 18 of STMFX, use "agpio2".
-
-Concerning gpio-ranges property:
-- if all STMFX pins[24:0] are available (no other STMFX function in use), you
-  should use gpio-ranges = <&stmfx_pinctrl 0 0 24>;
-- if agpio[3:0] are not available (STMFX Touchscreen function in use), you
-  should use gpio-ranges = <&stmfx_pinctrl 0 0 16>, <&stmfx_pinctrl 20 20 4>;
-- if agpio[7:4] are not available (STMFX IDD function in use), you
-  should use gpio-ranges = <&stmfx_pinctrl 0 0 20>;
-
-
-Example:
-
-	stmfx: stmfx@42 {
-		...
-
-		stmfx_pinctrl: stmfx-pin-controller {
-			compatible = "st,stmfx-0300-pinctrl";
-			#gpio-cells = <2>;
-			#interrupt-cells = <2>;
-			gpio-controller;
-			interrupt-controller;
-			gpio-ranges = <&stmfx_pinctrl 0 0 24>;
-
-			joystick_pins: joystick {
-				pins = "gpio0", "gpio1", "gpio2", "gpio3", "gpio4";
-				drive-push-pull;
-				bias-pull-up;
-			};
-		};
-	};
-
-Example of STMFX GPIO consumers:
-
-	joystick {
-		compatible = "gpio-keys";
-		#address-cells = <1>;
-		#size-cells = <0>;
-		pinctrl-0 = <&joystick_pins>;
-		pinctrl-names = "default";
-		button-0 {
-			label = "JoySel";
-			linux,code = <KEY_ENTER>;
-			interrupt-parent = <&stmfx_pinctrl>;
-			interrupts = <0 IRQ_TYPE_EDGE_RISING>;
-		};
-		button-1 {
-			label = "JoyDown";
-			linux,code = <KEY_DOWN>;
-			interrupt-parent = <&stmfx_pinctrl>;
-			interrupts = <1 IRQ_TYPE_EDGE_RISING>;
-		};
-		button-2 {
-			label = "JoyLeft";
-			linux,code = <KEY_LEFT>;
-			interrupt-parent = <&stmfx_pinctrl>;
-			interrupts = <2 IRQ_TYPE_EDGE_RISING>;
-		};
-		button-3 {
-			label = "JoyRight";
-			linux,code = <KEY_RIGHT>;
-			interrupt-parent = <&stmfx_pinctrl>;
-			interrupts = <3 IRQ_TYPE_EDGE_RISING>;
-		};
-		button-4 {
-			label = "JoyUp";
-			linux,code = <KEY_UP>;
-			interrupt-parent = <&stmfx_pinctrl>;
-			interrupts = <4 IRQ_TYPE_EDGE_RISING>;
-		};
-	};
-
-	leds {
-		compatible = "gpio-leds";
-		orange {
-			gpios = <&stmfx_pinctrl 17 1>;
-		};
-
-		blue {
-			gpios = <&stmfx_pinctrl 19 1>;
-		};
-	}