Merge tag 'pinctrl-v4.6-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl

Pull pin control updates from Linus Walleij:
 "An almost purely driver related set of changes with no major changes
  to the framework, only one patch adding an unlocked version of the
  pinctrl_find_gpio_range_from_pin() library call.

  New drivers:
   - ST Microelectronics STM32 MCU support: this is a non-MMU low-end
     platform for IoT things (etc).
   - Microchip PIC32 MCU support: same story as for STM32.

  New subdrivers:
   - Allwinner SunXi H3 R_PIO controller support.
   - Qualcomm IPQ4019 support.
   - MediaTek MT2701 and MT7623.
   - Allwinner A64

  Non-critical fixes:
   - gpio_disable_free() for the Vybrid.
   - pinctrl single: use a separate lockdep class.

  Misc:
   - Substantial cleanups and rewrites for the Super-H PFC driver and
     subdrivers.
   - Various fixes and cleanups, especially Paul Gortmakers work to make
     nonmodular drivers nonmodular"

* tag 'pinctrl-v4.6-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: (75 commits)
  pinctrl: single: Use a separate lockdep class
  drivers: pinctrl: add driver for Allwinner A64 SoC
  pinctrl: Broadcom Northstar2 pinctrl device tree bindings
  pinctrl: amlogic: Make driver independent from two-domain configuration
  pinctrl: amlogic: Separate some pin functions for Meson8 / Meson8b
  pinctrl: at91: use __maybe_unused to hide pm functions
  pinctrl: sh-pfc: core: don't open code of_device_get_match_data()
  pinctrl: uniphier: rename CONFIG options and file names
  pinctrl: sunxi: make A80 explicitly non-modular
  pinctrl: stm32: make explicitly non-modular
  pinctrl: sh-pfc: make explicitly non-modular
  pinctrl: meson: make explicitly non-modular
  pinctrl: pinctrl-mt6397 driver explicitly non-modular
  pinctrl: sunxi: does not need module.h
  pinctrl: pxa2xx: export symbols
  pinctrl: sunxi: Change mux setting on PI irq pins
  pinctrl: sunxi: Remove non existing irq's
  pinctrl: imx: attach iomuxc device to gpr syscon
  pinctrl-bcm2835: Fix cut-and-paste error in "pull" parsing
  pinctrl: lpc1850-scu: document nxp,gpio-pin-interrupt
  ...

1 files changed, 74 insertions, 0 deletions

diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,ipq4019-pinctrl.txt b/Documentation/devicetree/bindings/pinctrl/qcom,ipq4019-pinctrl.txt
new file mode 100644
index 000000000000..cfb8500dd56b
--- /dev/null
+++ b/Documentation/devicetree/bindings/pinctrl/qcom,ipq4019-pinctrl.txt
@@ -0,0 +1,74 @@
+Qualcomm Atheros IPQ4019 TLMM block
+
+This is the Top Level Mode Multiplexor block found on the Qualcomm IPQ8019
+platform, it provides pinctrl, pinmux, pinconf, and gpiolib facilities.
+
+Required properties:
+- compatible: "qcom,ipq4019-pinctrl"
+- reg: Should be the base address and length of the TLMM block.
+- interrupts: Should be the parent IRQ of the TLMM block.
+- interrupt-controller: Marks the device node as an interrupt controller.
+- #interrupt-cells: Should be two.
+- gpio-controller: Marks the device node as a GPIO controller.
+- #gpio-cells : Should be two.
+                The first cell is the gpio pin number and the
+                second cell is used for optional parameters.
+
+Please refer to ../gpio/gpio.txt and ../interrupt-controller/interrupts.txt for
+a general description of GPIO and interrupt bindings.
+
+Please refer to pinctrl-bindings.txt in this directory for details of the
+common pinctrl bindings used by client devices, including the meaning of the
+phrase "pin configuration node".
+
+The pin configuration nodes act as a container for an abitrary number of
+subnodes. Each of these subnodes represents some desired configuration for a
+pin, a group, or a list of pins or groups. This configuration can include the
+mux function to select on those pin(s)/group(s), and various pin configuration
+parameters, such as pull-up, drive strength, etc.
+
+The name of each subnode is not important; all subnodes should be enumerated
+and processed purely based on their content.
+
+Each subnode only affects those parameters that are explicitly listed. In
+other words, a subnode that lists a mux function but no pin configuration
+parameters implies no information about any pin configuration parameters.
+Similarly, a pin subnode that describes a pullup parameter implies no
+information about e.g. the mux function.
+
+
+The following generic properties as defined in pinctrl-bindings.txt are valid
+to specify in a pin configuration subnode:
+ pins, function, bias-disable, bias-pull-down, bias-pull,up, drive-strength.
+
+Non-empty subnodes must specify the 'pins' property.
+Note that not all properties are valid for all pins.
+
+
+Valid values for qcom,pins are:
+  gpio0-gpio99
+    Supports mux, bias and drive-strength
+
+Valid values for qcom,function are:
+gpio, blsp_uart1, blsp_i2c0, blsp_i2c1, blsp_uart0, blsp_spi1, blsp_spi0
+
+Example:
+
+	tlmm: pinctrl@1000000 {
+		compatible = "qcom,ipq4019-pinctrl";
+		reg = <0x1000000 0x300000>;
+
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+		interrupts = <0 208 0>;
+
+		serial_pins: serial_pinmux {
+			mux {
+				pins = "gpio60", "gpio61";
+				function = "blsp_uart0";
+				bias-disable;
+			};
+		};
+	};