Merge tag 'pinctrl-v4.8-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl

Pull pin control updates from Linus Walleij:
 "This is the bulk of pin control changes for the v4.8 kernel cycle.

  Nothing stands out as especially exiting: new drivers, new subdrivers,
  lots of cleanups and incremental features.

  Business as usual.

  New drivers:

   - New driver for Oxnas pin control and GPIO.  This ARM-based chipset
     is used in a few storage (NAS) type devices.

   - New driver for the MAX77620/MAX20024 pin controller portions.

   - New driver for the Intel Merrifield pin controller.

  New subdrivers:

   - New subdriver for the Qualcomm MDM9615

   - New subdriver for the STM32F746 MCU

   - New subdriver for the Broadcom NSP SoC.

  Cleanups:

   - Demodularization of bool compiled-in drivers.

  Apart from this there is just regular incremental improvements to a
  lot of drivers, especially Uniphier and PFC"

* tag 'pinctrl-v4.8-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: (131 commits)
  pinctrl: fix pincontrol definition for marvell
  pinctrl: xway: fix typo
  Revert "pinctrl: amd: make it explicitly non-modular"
  pinctrl: iproc: Add NSP and Stingray GPIO support
  pinctrl: Update iProc GPIO DT bindings
  pinctrl: bcm: add OF dependencies
  pinctrl: ns2: remove redundant dev_err call in ns2_pinmux_probe()
  pinctrl: Add STM32F746 MCU support
  pinctrl: intel: Protect set wake flow by spin lock
  pinctrl: nsp: remove redundant dev_err call in nsp_pinmux_probe()
  pinctrl: uniphier: add Ethernet pin-mux settings
  sh-pfc: Use PTR_ERR_OR_ZERO() to simplify the code
  pinctrl: ns2: fix return value check in ns2_pinmux_probe()
  pinctrl: qcom: update DT bindings with ebi2 groups
  pinctrl: qcom: establish proper EBI2 pin groups
  pinctrl: imx21: Remove the MODULE_DEVICE_TABLE() macro
  Documentation: dt: Add new compatible to STM32 pinctrl driver bindings
  includes: dt-bindings: Add STM32F746 pinctrl DT bindings
  pinctrl: sunxi: fix nand0 function name for sun8i
  pinctrl: uniphier: remove pointless pin-mux settings for PH1-LD11
  ...

1 files changed, 79 insertions, 0 deletions

diff --git a/Documentation/devicetree/bindings/pinctrl/brcm,nsp-pinmux.txt b/Documentation/devicetree/bindings/pinctrl/brcm,nsp-pinmux.txt
new file mode 100644
index 000000000000..603564e5fe6f
--- /dev/null
+++ b/Documentation/devicetree/bindings/pinctrl/brcm,nsp-pinmux.txt
@@ -0,0 +1,79 @@
+Broadcom NSP (Northstar plus) IOMUX Controller
+
+The NSP IOMUX controller supports group based mux configuration. In
+addition, certain pins can be muxed to GPIO function individually.
+
+Required properties:
+- compatible:
+    Must be "brcm,nsp-pinmux"
+
+- reg:
+    Should contain the register physical address and length for each of
+    GPIO_CONTROL0, GP_AUX_SEL and IPROC_CONFIG IOMUX registers
+
+Properties in subnodes:
+- function:
+    The mux function to select
+
+- groups:
+    The list of groups to select with a given function
+
+For more details, refer to
+Documentation/devicetree/bindings/pinctrl/pinctrl-bindings.txt
+
+For example:
+
+	pinmux: pinmux@1803f1c0 {
+		compatible = "brcm,nsp-pinmux";
+		reg = <0x1803f1c0 0x04>,
+		      <0x18030028 0x04>,
+		      <0x1803f408 0x04>;
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&pwm &gpio_b &nand_sel>;
+
+		pwm: pwm {
+			function = "pwm";
+			groups = "pwm0_grp", "pwm1_grp";
+		};
+
+		gpio_b: gpio_b {
+			function = "gpio_b";
+			groups = "gpio_b_0_grp", "gpio_b_1_grp";
+		};
+
+		nand_sel: nand_sel {
+			function = "nand";
+			groups = "nand_grp";
+		};
+	};
+
+List of supported functions and groups in Northstar Plus:
+
+"spi": "spi_grp"
+
+"i2c": "i2c_grp"
+
+"mdio": "mdio_grp"
+
+"pwm": "pwm0_grp", "pwm1_grp", "pwm2_grp", "pwm3_grp"
+
+"gpio_b": "gpio_b_0_grp", "gpio_b_1_grp", "gpio_b_2_grp", "gpio_b_3_grp"
+
+"uart1": "uart1_grp"
+
+"uart2": "uart2_grp"
+
+"synce": "synce_grp"
+
+"sata_led_grps": "sata0_led_grp", "sata1_led_grp"
+
+"xtal_out": "xtal_out_grp"
+
+"sdio": "sdio_pwr_grp", "sdio_1p8v_grp"
+
+"switch_led": "switch_p05_led0_grp", "switch_p05_led1_grp"
+
+"nand": "nand_grp"
+
+"emmc": "emmc_grp"