Merge tag 'phy-for-5.8' of git://git.kernel.org/pub/scm/linux/kernel/git/phy/linux-phy into usb-next

Kishon writes:

phy: for 5.8

*) Add new PHY driver to support Cadence SALVO PHY which supports USB3 & USB2
*) Add new PHY driver to support Intel ComboPhy which supports PCIe, SATA and
   EMAC
*) Add new PHY driver for Qualcomm IPQ40xx USB PHY
*) Add new PHY driver for Synopsys FemtoPHY V2 driver used in Qualcomm SOCs
*) Add support for Qualcomm SM8250 UFS PHY and SM8150 QMP USB3 PHY in
   qcom-qmp-phy driver
*) Add support for Amlogic USB2 PHY on Meson8m2 in phy-meson8b-usb2 driver
*) Add DisplayPort mode support in Wiz (TI Cadence PHY wrapper), to enable eDP
   in TI's J721E SoC
*) Add support for super speed USB PHY in TI's AM654 SoC
*) Add fix in Broadcom Stingray USB PHY to get USB PHY PLL lock reliably
*) Add fix in Samsung phy-s5pv210-usb2 to get USB working on s5pv210
*) Add fix in Amlogic phy-meson8b-usb2 to get host only mode working on Meson8
*) Add fix in Cadence phy-cadence-sierra to get USB3 device disconnect issue
*) Convert meson8b-usb2-phy, qcom-qmp-phy, rcar-gen3-phy-usb2 and
   rcar-gen3-phy-usb3 device tree binding to YAML schema
*) Minor fixes and cleanups in phy-cpcap-usb, j721e-wiz, omap-usb2,
   phy-bcm-sr-usb, phy-brcm-usb PHY driver

Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>

* tag 'phy-for-5.8' of git://git.kernel.org/pub/scm/linux/kernel/git/phy/linux-phy: (43 commits)
  phy: intel: Add driver support for ComboPhy
  dt-bindings: phy: Add YAML schemas for Intel ComboPhy
  dt-bindings: phy: Add PHY_TYPE_XPCS definition
  phy: qcom-qmp: Add QMP V3 USB3 PHY support for SC7180
  dt-bindings: phy: qcom,qmp-usb3-dp: Add support for SC7180
  dt-bindings: phy: qcom,qmp-usb3-dp: Add dt bindings for USB3 DP PHY
  dt-bindings: phy: qcom,qmp: Convert QMP PHY bindings to yaml
  phy: cadence: sierra: Fix for USB3 U1/U2 state
  phy: ti: am654: add support for USB super-speed
  phy: ti: am654: show up in regmap debugfs
  drivers: phy: sr-usb: do not use internal fsm for USB2 phy init
  dt-bindings: phy: renesas: usb3-phy: add r8a77961 support
  dt-bindings: phy: renesas: usb3-phy: convert bindings to json-schema
  dt-bindings: phy: renesas: usb2-phy: add r8a77961 support
  dt-bindings: phy: renesas: usb2-phy: convert bindings to json-schema
  phy: qcom-qmp: Ensure register indirection arrays initialized
  phy: omap-usb2: Clean up exported header
  phy: phy-bcm-ns2-usbdrd: Constify phy_ops
  phy: phy-brcm-usb: Constify static structs
  phy: sr-usb: Constify phy_ops
  ...

13 files changed, 992 insertions, 392 deletions

diff --git a/Documentation/devicetree/bindings/phy/amlogic,meson8b-usb2-phy.yaml b/Documentation/devicetree/bindings/phy/amlogic,meson8b-usb2-phy.yaml
new file mode 100644
index 000000000000..03c4809dbe8d
--- /dev/null
+++ b/Documentation/devicetree/bindings/phy/amlogic,meson8b-usb2-phy.yaml
@@ -0,0 +1,64 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: "http://devicetree.org/schemas/phy/amlogic,meson8b-usb2-phy.yaml#"
+$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+
+title: Amlogic Meson8, Meson8b, Meson8m2 and GXBB USB2 PHY
+
+maintainers:
+  - Martin Blumenstingl <martin.blumenstingl@googlemail.com>
+
+properties:
+  compatible:
+    oneOf:
+      - items:
+          - enum:
+              - amlogic,meson8-usb2-phy
+              - amlogic,meson8b-usb2-phy
+              - amlogic,meson8m2-usb2-phy
+          - const: amlogic,meson-mx-usb2-phy
+      - const: amlogic,meson-gxbb-usb2-phy
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    minItems: 2
+
+  clock-names:
+    items:
+      - const: usb_general
+      - const: usb
+
+  resets:
+    minItems: 1
+
+  "#phy-cells":
+    const: 0
+
+  phy-supply:
+    description:
+      Phandle to a regulator that provides power to the PHY. This
+      regulator will be managed during the PHY power on/off sequence.
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - clock-names
+  - "#phy-cells"
+
+additionalProperties: false
+
+examples:
+  - |
+    usb-phy@c0000000 {
+      compatible = "amlogic,meson-gxbb-usb2-phy";
+      reg = <0xc0000000 0x20>;
+      resets = <&reset_usb_phy>;
+      clocks = <&clk_usb_general>, <&reset_usb>;
+      clock-names = "usb_general", "usb";
+      phy-supply = <&usb_vbus>;
+      #phy-cells = <0>;
+    };
diff --git a/Documentation/devicetree/bindings/phy/cdns,salvo-phy.yaml b/Documentation/devicetree/bindings/phy/cdns,salvo-phy.yaml
new file mode 100644
index 000000000000..3a07285b5470
--- /dev/null
+++ b/Documentation/devicetree/bindings/phy/cdns,salvo-phy.yaml
@@ -0,0 +1,52 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+# Copyright (c) 2020 NXP
+%YAML 1.2
+---
+$id: "http://devicetree.org/schemas/phy/cdns,salvo-phy.yaml#"
+$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+
+title: Cadence SALVO PHY
+
+maintainers:
+  - Peter Chen <peter.chen@nxp.com>
+
+properties:
+  compatible:
+    enum:
+      - nxp,salvo-phy
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  clock-names:
+    items:
+      - const: salvo_phy_clk
+
+  power-domains:
+    maxItems: 1
+
+  "#phy-cells":
+    const: 0
+
+required:
+  - compatible
+  - reg
+  - "#phy-cells"
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/firmware/imx/rsrc.h>
+
+    usb3phy: usb3-phy@5b160000 {
+        compatible = "nxp,salvo-phy";
+        reg = <0x5b160000 0x40000>;
+        clocks = <&usb3_lpcg 4>;
+        clock-names = "salvo_phy_clk";
+        power-domains = <&pd IMX_SC_R_USB_2_PHY>;
+        #phy-cells = <0>;
+    };
diff --git a/Documentation/devicetree/bindings/phy/intel,combo-phy.yaml b/Documentation/devicetree/bindings/phy/intel,combo-phy.yaml
new file mode 100644
index 000000000000..347d0cdfb80d
--- /dev/null
+++ b/Documentation/devicetree/bindings/phy/intel,combo-phy.yaml
@@ -0,0 +1,101 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/phy/intel,combo-phy.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Intel ComboPhy Subsystem
+
+maintainers:
+  - Dilip Kota <eswara.kota@linux.intel.com>
+
+description: |
+  Intel Combophy subsystem supports PHYs for PCIe, EMAC and SATA
+  controllers. A single Combophy provides two PHY instances.
+
+properties:
+  $nodename:
+    pattern: "combophy(@.*|-[0-9a-f])*$"
+
+  compatible:
+    items:
+      - const: intel,combophy-lgm
+      - const: intel,combo-phy
+
+  clocks:
+    maxItems: 1
+
+  reg:
+    items:
+      - description: ComboPhy core registers
+      - description: PCIe app core control registers
+
+  reg-names:
+    items:
+      - const: core
+      - const: app
+
+  resets:
+    maxItems: 4
+
+  reset-names:
+    items:
+      - const: phy
+      - const: core
+      - const: iphy0
+      - const: iphy1
+
+  intel,syscfg:
+    $ref: /schemas/types.yaml#/definitions/phandle-array
+    description: Chip configuration registers handle and ComboPhy instance id
+
+  intel,hsio:
+    $ref: /schemas/types.yaml#/definitions/phandle-array
+    description: HSIO registers handle and ComboPhy instance id on NOC
+
+  intel,aggregation:
+    type: boolean
+    description: |
+      Specify the flag to configure ComboPHY in dual lane mode.
+
+  intel,phy-mode:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: |
+      Mode of the two phys in ComboPhy.
+      See dt-bindings/phy/phy.h for values.
+
+  "#phy-cells":
+    const: 1
+
+required:
+  - compatible
+  - clocks
+  - reg
+  - reg-names
+  - intel,syscfg
+  - intel,hsio
+  - intel,phy-mode
+  - "#phy-cells"
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/phy/phy.h>
+    combophy@d0a00000 {
+        compatible = "intel,combophy-lgm", "intel,combo-phy";
+        clocks = <&cgu0 1>;
+        #phy-cells = <1>;
+        reg = <0xd0a00000 0x40000>,
+              <0xd0a40000 0x1000>;
+        reg-names = "core", "app";
+        resets = <&rcu0 0x50 6>,
+                 <&rcu0 0x50 17>,
+                 <&rcu0 0x50 23>,
+                 <&rcu0 0x50 24>;
+        reset-names = "phy", "core", "iphy0", "iphy1";
+        intel,syscfg = <&sysconf 0>;
+        intel,hsio = <&hsiol 0>;
+        intel,phy-mode = <PHY_TYPE_PCIE>;
+        intel,aggregation;
+    };
diff --git a/Documentation/devicetree/bindings/phy/meson8b-usb2-phy.txt b/Documentation/devicetree/bindings/phy/meson8b-usb2-phy.txt
deleted file mode 100644
index d81d73aea608..000000000000
--- a/Documentation/devicetree/bindings/phy/meson8b-usb2-phy.txt
+++ /dev/null
@@ -1,28 +0,0 @@
-* Amlogic Meson8, Meson8b and GXBB USB2 PHY
-
-Required properties:
-- compatible:	Depending on the platform this should be one of:
-	"amlogic,meson8-usb2-phy"
-	"amlogic,meson8b-usb2-phy"
-	"amlogic,meson-gxbb-usb2-phy"
-- reg:		The base address and length of the registers
-- #phys-cells:	should be 0 (see phy-bindings.txt in this directory)
-- clocks:	phandle and clock identifier for the phy clocks
-- clock-names:	"usb_general" and "usb"
-
-Optional properties:
-- resets:	reference to the reset controller
-- phy-supply:	see phy-bindings.txt in this directory
-
-
-Example:
-
-usb0_phy: usb-phy@c0000000 {
-	compatible = "amlogic,meson-gxbb-usb2-phy";
-	#phy-cells = <0>;
-	reg = <0x0 0xc0000000 0x0 0x20>;
-	resets = <&reset RESET_USB_OTG>;
-	clocks = <&clkc CLKID_USB>, <&clkc CLKID_USB0>;
-	clock-names = "usb_general", "usb";
-	phy-supply = <&usb_vbus>;
-};
diff --git a/Documentation/devicetree/bindings/phy/qcom,qmp-phy.yaml b/Documentation/devicetree/bindings/phy/qcom,qmp-phy.yaml
new file mode 100644
index 000000000000..973b2d196f46
--- /dev/null
+++ b/Documentation/devicetree/bindings/phy/qcom,qmp-phy.yaml
@@ -0,0 +1,313 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+
+%YAML 1.2
+---
+$id: "http://devicetree.org/schemas/phy/qcom,qmp-phy.yaml#"
+$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+
+title: Qualcomm QMP PHY controller
+
+maintainers:
+  - Manu Gautam <mgautam@codeaurora.org>
+
+description:
+  QMP phy controller supports physical layer functionality for a number of
+  controllers on Qualcomm chipsets, such as, PCIe, UFS, and USB.
+
+properties:
+  compatible:
+    enum:
+      - qcom,ipq8074-qmp-pcie-phy
+      - qcom,msm8996-qmp-pcie-phy
+      - qcom,msm8996-qmp-ufs-phy
+      - qcom,msm8996-qmp-usb3-phy
+      - qcom,msm8998-qmp-pcie-phy
+      - qcom,msm8998-qmp-ufs-phy
+      - qcom,msm8998-qmp-usb3-phy
+      - qcom,sdm845-qhp-pcie-phy
+      - qcom,sdm845-qmp-pcie-phy
+      - qcom,sdm845-qmp-ufs-phy
+      - qcom,sdm845-qmp-usb3-uni-phy
+      - qcom,sm8150-qmp-ufs-phy
+      - qcom,sm8250-qmp-ufs-phy
+
+  reg:
+    items:
+      - description: Address and length of PHY's common serdes block.
+
+  "#clock-cells":
+     enum: [ 1, 2 ]
+
+  "#address-cells":
+    enum: [ 1, 2 ]
+
+  "#size-cells":
+    enum: [ 1, 2 ]
+
+  clocks:
+    minItems: 1
+    maxItems: 4
+
+  clock-names:
+    minItems: 1
+    maxItems: 4
+
+  resets:
+    minItems: 1
+    maxItems: 3
+
+  reset-names:
+    minItems: 1
+    maxItems: 3
+
+  vdda-phy-supply:
+    description:
+        Phandle to a regulator supply to PHY core block.
+
+  vdda-pll-supply:
+    description:
+        Phandle to 1.8V regulator supply to PHY refclk pll block.
+
+  vddp-ref-clk-supply:
+    description:
+        Phandle to a regulator supply to any specific refclk
+        pll block.
+
+#Required nodes:
+patternProperties:
+  "^phy@[0-9a-f]+$":
+    type: object
+    description:
+      Each device node of QMP phy is required to have as many child nodes as
+      the number of lanes the PHY has.
+
+required:
+  - compatible
+  - reg
+  - "#clock-cells"
+  - "#address-cells"
+  - "#size-cells"
+  - clocks
+  - clock-names
+  - resets
+  - reset-names
+  - vdda-phy-supply
+  - vdda-pll-supply
+
+additionalProperties: false
+
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,sdm845-qmp-usb3-uni-phy
+    then:
+      properties:
+        clocks:
+          items:
+            - description: Phy aux clock.
+            - description: Phy config clock.
+            - description: 19.2 MHz ref clk.
+            - description: Phy common block aux clock.
+        clock-names:
+          items:
+            - const: aux
+            - const: cfg_ahb
+            - const: ref
+            - const: com_aux
+        resets:
+          items:
+            - description: reset of phy block.
+            - description: phy common block reset.
+        reset-names:
+          items:
+            - const: phy
+            - const: common
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,msm8996-qmp-pcie-phy
+    then:
+      properties:
+        clocks:
+          items:
+            - description: Phy aux clock.
+            - description: Phy config clock.
+            - description: 19.2 MHz ref clk.
+        clock-names:
+          items:
+            - const: aux
+            - const: cfg_ahb
+            - const: ref
+        resets:
+          items:
+            - description: reset of phy block.
+            - description: phy common block reset.
+            - description: phy's ahb cfg block reset.
+        reset-names:
+          items:
+            - const: phy
+            - const: common
+            - const: cfg
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,msm8996-qmp-usb3-phy
+              - qcom,msm8998-qmp-pcie-phy
+              - qcom,msm8998-qmp-usb3-phy
+    then:
+      properties:
+        clocks:
+          items:
+            - description: Phy aux clock.
+            - description: Phy config clock.
+            - description: 19.2 MHz ref clk.
+        clock-names:
+          items:
+            - const: aux
+            - const: cfg_ahb
+            - const: ref
+        resets:
+          items:
+            - description: reset of phy block.
+            - description: phy common block reset.
+        reset-names:
+          items:
+             - const: phy
+             - const: common
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,msm8996-qmp-ufs-phy
+    then:
+      properties:
+        clocks:
+          items:
+            - description: 19.2 MHz ref clk.
+        clock-names:
+          items:
+            - const: ref
+        resets:
+          items:
+            - description: PHY reset in the UFS controller.
+        reset-names:
+          items:
+            - const: ufsphy
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,msm8998-qmp-ufs-phy
+              - qcom,sdm845-qmp-ufs-phy
+              - qcom,sm8150-qmp-ufs-phy
+              - qcom,sm8250-qmp-ufs-phy
+    then:
+      properties:
+        clocks:
+          items:
+            - description: 19.2 MHz ref clk.
+            - description: Phy reference aux clock.
+        clock-names:
+          items:
+            - const: ref
+            - const: ref_aux
+        resets:
+          items:
+            - description: PHY reset in the UFS controller.
+        reset-names:
+          items:
+            - const: ufsphy
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,ipq8074-qmp-pcie-phy
+    then:
+      properties:
+        clocks:
+          items:
+            - description: pipe clk.
+        clock-names:
+          items:
+            - const: pipe_clk
+        resets:
+          items:
+            - description: reset of phy block.
+            - description: phy common block reset.
+        reset-names:
+          items:
+            - const: phy
+            - const: common
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,sdm845-qhp-pcie-phy
+              - qcom,sdm845-qmp-pcie-phy
+    then:
+      properties:
+        clocks:
+          items:
+            - description: Phy aux clock.
+            - description: Phy config clock.
+            - description: 19.2 MHz ref clk.
+            - description: Phy refgen clk.
+        clock-names:
+          items:
+            - const: aux
+            - const: cfg_ahb
+            - const: ref
+            - const: refgen
+        resets:
+          items:
+            - description: reset of phy block.
+        reset-names:
+          items:
+            - const: phy
+
+examples:
+  - |
+    #include <dt-bindings/clock/qcom,gcc-sdm845.h>
+    usb_2_qmpphy: phy-wrapper@88eb000 {
+        compatible = "qcom,sdm845-qmp-usb3-uni-phy";
+        reg = <0 0x088eb000 0 0x18c>;
+        #clock-cells = <1>;
+        #address-cells = <2>;
+        #size-cells = <2>;
+
+        clocks = <&gcc GCC_USB3_SEC_PHY_AUX_CLK >,
+                 <&gcc GCC_USB_PHY_CFG_AHB2PHY_CLK>,
+                 <&gcc GCC_USB3_SEC_CLKREF_CLK>,
+                 <&gcc GCC_USB3_SEC_PHY_COM_AUX_CLK>;
+        clock-names = "aux", "cfg_ahb", "ref", "com_aux";
+
+        resets = <&gcc GCC_USB3PHY_PHY_SEC_BCR>,
+                 <&gcc GCC_USB3_PHY_SEC_BCR>;
+        reset-names = "phy", "common";
+
+        vdda-phy-supply = <&vdda_usb2_ss_1p2>;
+        vdda-pll-supply = <&vdda_usb2_ss_core>;
+
+        usb_2_ssphy: phy@88eb200 {
+                reg = <0 0x088eb200 0 0x128>,
+                      <0 0x088eb400 0 0x1fc>,
+                      <0 0x088eb800 0 0x218>,
+                      <0 0x088eb600 0 0x70>;
+                #clock-cells = <0>;
+                #phy-cells = <0>;
+                clocks = <&gcc GCC_USB3_SEC_PHY_PIPE_CLK>;
+                clock-names = "pipe0";
+                clock-output-names = "usb3_uni_phy_pipe_clk_src";
+            };
+        };
diff --git a/Documentation/devicetree/bindings/phy/qcom,qmp-usb3-dp-phy.yaml b/Documentation/devicetree/bindings/phy/qcom,qmp-usb3-dp-phy.yaml
new file mode 100644
index 000000000000..b770e637df1d
--- /dev/null
+++ b/Documentation/devicetree/bindings/phy/qcom,qmp-usb3-dp-phy.yaml
@@ -0,0 +1,136 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+
+%YAML 1.2
+---
+$id: "http://devicetree.org/schemas/phy/qcom,qmp-usb3-dp-phy.yaml#"
+$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+
+title: Qualcomm QMP USB3 DP PHY controller
+
+maintainers:
+  - Manu Gautam <mgautam@codeaurora.org>
+
+properties:
+  compatible:
+    enum:
+      - qcom,sc7180-qmp-usb3-phy
+      - qcom,sdm845-qmp-usb3-phy
+  reg:
+    items:
+      - description: Address and length of PHY's common serdes block.
+      - description: Address and length of the DP_COM control block.
+
+  reg-names:
+    items:
+      - const: reg-base
+      - const: dp_com
+
+  "#clock-cells":
+     enum: [ 1, 2 ]
+
+  "#address-cells":
+    enum: [ 1, 2 ]
+
+  "#size-cells":
+    enum: [ 1, 2 ]
+
+  clocks:
+    items:
+      - description: Phy aux clock.
+      - description: Phy config clock.
+      - description: 19.2 MHz ref clk.
+      - description: Phy common block aux clock.
+
+  clock-names:
+    items:
+      - const: aux
+      - const: cfg_ahb
+      - const: ref
+      - const: com_aux
+
+  resets:
+    items:
+      - description: reset of phy block.
+      - description: phy common block reset.
+
+  reset-names:
+    items:
+      - const: phy
+      - const: common
+
+  vdda-phy-supply:
+    description:
+        Phandle to a regulator supply to PHY core block.
+
+  vdda-pll-supply:
+    description:
+        Phandle to 1.8V regulator supply to PHY refclk pll block.
+
+  vddp-ref-clk-supply:
+    description:
+        Phandle to a regulator supply to any specific refclk
+        pll block.
+
+#Required nodes:
+patternProperties:
+  "^phy@[0-9a-f]+$":
+    type: object
+    description:
+      Each device node of QMP phy is required to have as many child nodes as
+      the number of lanes the PHY has.
+
+required:
+  - compatible
+  - reg
+  - reg-names
+  - "#clock-cells"
+  - "#address-cells"
+  - "#size-cells"
+  - clocks
+  - clock-names
+  - resets
+  - reset-names
+  - vdda-phy-supply
+  - vdda-pll-supply
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/qcom,gcc-sdm845.h>
+    usb_1_qmpphy: phy-wrapper@88e9000 {
+        compatible = "qcom,sdm845-qmp-usb3-phy";
+        reg = <0 0x088e9000 0 0x18c>,
+              <0 0x088e8000 0 0x10>;
+        reg-names = "reg-base", "dp_com";
+        #clock-cells = <1>;
+        #address-cells = <2>;
+        #size-cells = <2>;
+
+        clocks = <&gcc GCC_USB3_PRIM_PHY_AUX_CLK>,
+                 <&gcc GCC_USB_PHY_CFG_AHB2PHY_CLK>,
+                 <&gcc GCC_USB3_PRIM_CLKREF_CLK>,
+                 <&gcc GCC_USB3_PRIM_PHY_COM_AUX_CLK>;
+        clock-names = "aux", "cfg_ahb", "ref", "com_aux";
+
+        resets = <&gcc GCC_USB3_PHY_PRIM_BCR>,
+                 <&gcc GCC_USB3_DP_PHY_PRIM_BCR>;
+        reset-names = "phy", "common";
+
+        vdda-phy-supply = <&vdda_usb2_ss_1p2>;
+        vdda-pll-supply = <&vdda_usb2_ss_core>;
+
+        usb_1_ssphy: phy@88e9200 {
+                reg = <0 0x088e9200 0 0x128>,
+                      <0 0x088e9400 0 0x200>,
+                      <0 0x088e9c00 0 0x218>,
+                      <0 0x088e9600 0 0x128>,
+                      <0 0x088e9800 0 0x200>,
+                      <0 0x088e9a00 0 0x100>;
+                #clock-cells = <0>;
+                #phy-cells = <0>;
+                clocks = <&gcc GCC_USB3_PRIM_PHY_PIPE_CLK>;
+                clock-names = "pipe0";
+                clock-output-names = "usb3_phy_pipe_clk_src";
+            };
+        };
diff --git a/Documentation/devicetree/bindings/phy/qcom,usb-snps-femto-v2.yaml b/Documentation/devicetree/bindings/phy/qcom,usb-snps-femto-v2.yaml
new file mode 100644
index 000000000000..574f890fab1d
--- /dev/null
+++ b/Documentation/devicetree/bindings/phy/qcom,usb-snps-femto-v2.yaml
@@ -0,0 +1,80 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: "http://devicetree.org/schemas/phy/qcom,usb-snps-femto-v2.yaml#"
+$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+
+title: Qualcomm Synopsys Femto High-Speed USB PHY V2
+
+maintainers:
+  - Wesley Cheng <wcheng@codeaurora.org>
+
+description: |
+  Qualcomm High-Speed USB PHY
+
+properties:
+  compatible:
+    enum:
+      - qcom,usb-snps-hs-7nm-phy
+      - qcom,sm8150-usb-hs-phy
+      - qcom,usb-snps-femto-v2-phy
+
+  reg:
+    maxItems: 1
+
+  "#phy-cells":
+    const: 0
+
+  clocks:
+    items:
+      - description: rpmhcc ref clock
+
+  clock-names:
+    items:
+      - const: ref
+
+  resets:
+    items:
+      - description: PHY core reset
+
+  vdda-pll-supply:
+    description: phandle to the regulator VDD supply node.
+
+  vdda18-supply:
+    description: phandle to the regulator 1.8V supply node.
+
+  vdda33-supply:
+    description: phandle to the regulator 3.3V supply node.
+
+required:
+  - compatible
+  - reg
+  - "#phy-cells"
+  - clocks
+  - clock-names
+  - resets
+  - vdda-pll-supply
+  - vdda18-supply
+  - vdda33-supply
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/qcom,rpmh.h>
+    #include <dt-bindings/clock/qcom,gcc-sm8150.h>
+    phy@88e2000 {
+        compatible = "qcom,sm8150-usb-hs-phy";
+        reg = <0 0x088e2000 0 0x400>;
+        #phy-cells = <0>;
+
+        clocks = <&rpmhcc RPMH_CXO_CLK>;
+        clock-names = "ref";
+
+        resets = <&gcc GCC_QUSB2PHY_PRIM_BCR>;
+
+        vdda-pll-supply = <&vdd_usb_hs_core>;
+        vdda33-supply = <&vdda_usb_hs_3p1>;
+        vdda18-supply = <&vdda_usb_hs_1p8>;
+    };
+...
diff --git a/Documentation/devicetree/bindings/phy/qcom-qmp-phy.txt b/Documentation/devicetree/bindings/phy/qcom-qmp-phy.txt
deleted file mode 100644
index 54d6f8d43508..000000000000
--- a/Documentation/devicetree/bindings/phy/qcom-qmp-phy.txt
+++ /dev/null
@@ -1,242 +0,0 @@
-Qualcomm QMP PHY controller
-===========================
-
-QMP phy controller supports physical layer functionality for a number of
-controllers on Qualcomm chipsets, such as, PCIe, UFS, and USB.
-
-Required properties:
- - compatible: compatible list, contains:
-	       "qcom,ipq8074-qmp-pcie-phy" for PCIe phy on IPQ8074
-	       "qcom,msm8996-qmp-pcie-phy" for 14nm PCIe phy on msm8996,
-	       "qcom,msm8996-qmp-ufs-phy" for 14nm UFS phy on msm8996,
-	       "qcom,msm8996-qmp-usb3-phy" for 14nm USB3 phy on msm8996,
-	       "qcom,msm8998-qmp-usb3-phy" for USB3 QMP V3 phy on msm8998,
-	       "qcom,msm8998-qmp-ufs-phy" for UFS QMP phy on msm8998,
-	       "qcom,msm8998-qmp-pcie-phy" for PCIe QMP phy on msm8998,
-	       "qcom,sdm845-qhp-pcie-phy" for QHP PCIe phy on sdm845,
-	       "qcom,sdm845-qmp-pcie-phy" for QMP PCIe phy on sdm845,
-	       "qcom,sdm845-qmp-usb3-phy" for USB3 QMP V3 phy on sdm845,
-	       "qcom,sdm845-qmp-usb3-uni-phy" for USB3 QMP V3 UNI phy on sdm845,
-	       "qcom,sdm845-qmp-ufs-phy" for UFS QMP phy on sdm845,
-	       "qcom,sm8150-qmp-ufs-phy" for UFS QMP phy on sm8150.
-
-- reg:
-  - index 0: address and length of register set for PHY's common
-             serdes block.
-  - index 1: address and length of the DP_COM control block (for
-             "qcom,sdm845-qmp-usb3-phy" only).
-
-- reg-names:
-  - For "qcom,sdm845-qmp-usb3-phy":
-    - Should be: "reg-base", "dp_com"
-  - For all others:
-    - The reg-names property shouldn't be defined.
-
- - #address-cells: must be 1
- - #size-cells: must be 1
- - ranges: must be present
-
- - clocks: a list of phandles and clock-specifier pairs,
-	   one for each entry in clock-names.
- - clock-names: "cfg_ahb" for phy config clock,
-		"aux" for phy aux clock,
-		"ref" for 19.2 MHz ref clk,
-		"com_aux" for phy common block aux clock,
-		"ref_aux" for phy reference aux clock,
-
-		For "qcom,ipq8074-qmp-pcie-phy": no clocks are listed.
-		For "qcom,msm8996-qmp-pcie-phy" must contain:
-			"aux", "cfg_ahb", "ref".
-		For "qcom,msm8996-qmp-ufs-phy" must contain:
-			"ref".
-		For "qcom,msm8996-qmp-usb3-phy" must contain:
-			"aux", "cfg_ahb", "ref".
-		For "qcom,msm8998-qmp-usb3-phy" must contain:
-			"aux", "cfg_ahb", "ref".
-		For "qcom,msm8998-qmp-ufs-phy" must contain:
-			"ref", "ref_aux".
-		For "qcom,msm8998-qmp-pcie-phy" must contain:
-			"aux", "cfg_ahb", "ref".
-		For "qcom,sdm845-qhp-pcie-phy" must contain:
-			"aux", "cfg_ahb", "ref", "refgen".
-		For "qcom,sdm845-qmp-pcie-phy" must contain:
-			"aux", "cfg_ahb", "ref", "refgen".
-		For "qcom,sdm845-qmp-usb3-phy" must contain:
-			"aux", "cfg_ahb", "ref", "com_aux".
-		For "qcom,sdm845-qmp-usb3-uni-phy" must contain:
-			"aux", "cfg_ahb", "ref", "com_aux".
-		For "qcom,sdm845-qmp-ufs-phy" must contain:
-			"ref", "ref_aux".
-		For "qcom,sm8150-qmp-ufs-phy" must contain:
-			"ref", "ref_aux".
-
- - resets: a list of phandles and reset controller specifier pairs,
-	   one for each entry in reset-names.
- - reset-names: "phy" for reset of phy block,
-		"common" for phy common block reset,
-		"cfg" for phy's ahb cfg block reset,
-		"ufsphy" for the PHY reset in the UFS controller.
-
-		For "qcom,ipq8074-qmp-pcie-phy" must contain:
-			"phy", "common".
-		For "qcom,msm8996-qmp-pcie-phy" must contain:
-			"phy", "common", "cfg".
-		For "qcom,msm8996-qmp-ufs-phy": must contain:
-			"ufsphy".
-		For "qcom,msm8996-qmp-usb3-phy" must contain
-			"phy", "common".
-		For "qcom,msm8998-qmp-usb3-phy" must contain
-			"phy", "common".
-		For "qcom,msm8998-qmp-ufs-phy": must contain:
-			"ufsphy".
-		For "qcom,msm8998-qmp-pcie-phy" must contain:
-			"phy", "common".
-		For "qcom,sdm845-qhp-pcie-phy" must contain:
-			"phy".
-		For "qcom,sdm845-qmp-pcie-phy" must contain:
-			"phy".
-		For "qcom,sdm845-qmp-usb3-phy" must contain:
-			"phy", "common".
-		For "qcom,sdm845-qmp-usb3-uni-phy" must contain:
-			"phy", "common".
-		For "qcom,sdm845-qmp-ufs-phy": must contain:
-			"ufsphy".
-		For "qcom,sm8150-qmp-ufs-phy": must contain:
-			"ufsphy".
-
- - vdda-phy-supply: Phandle to a regulator supply to PHY core block.
- - vdda-pll-supply: Phandle to 1.8V regulator supply to PHY refclk pll block.
-
-Optional properties:
- - vddp-ref-clk-supply: Phandle to a regulator supply to any specific refclk
-			pll block.
-
-Required nodes:
- - Each device node of QMP phy is required to have as many child nodes as
-   the number of lanes the PHY has.
-
-Required properties for child nodes of PCIe PHYs (one child per lane):
- - reg: list of offset and length pairs of register sets for PHY blocks -
-	tx, rx, pcs, and pcs_misc (optional).
- - #phy-cells: must be 0
-
-Required properties for a single "lanes" child node of non-PCIe PHYs:
- - reg: list of offset and length pairs of register sets for PHY blocks
-	For 1-lane devices:
-		tx, rx, pcs, and (optionally) pcs_misc
-	For 2-lane devices:
-		tx0, rx0, pcs, tx1, rx1, and (optionally) pcs_misc
- - #phy-cells: must be 0
-
-Required properties for child node of PCIe and USB3 qmp phys:
- - clocks: a list of phandles and clock-specifier pairs,
-	   one for each entry in clock-names.
- - clock-names: Must contain following:
-		 "pipe<lane-number>" for pipe clock specific to each lane.
- - clock-output-names: Name of the PHY clock that will be the parent for
-		       the above pipe clock.
-	For "qcom,ipq8074-qmp-pcie-phy":
-		- "pcie20_phy0_pipe_clk"	Pipe Clock parent
-			(or)
-		  "pcie20_phy1_pipe_clk"
- - #clock-cells: must be 0
-    - Phy pll outputs pipe clocks for pipe based PHYs. These clocks are then
-      gate-controlled by the gcc.
-
-Required properties for child node of PHYs with lane reset, AKA:
-	"qcom,msm8996-qmp-pcie-phy"
- - resets: a list of phandles and reset controller specifier pairs,
-	   one for each entry in reset-names.
- - reset-names: Must contain following:
-		 "lane<lane-number>" for reset specific to each lane.
-
-Example:
-	phy@34000 {
-		compatible = "qcom,msm8996-qmp-pcie-phy";
-		reg = <0x34000 0x488>;
-		#address-cells = <1>;
-		#size-cells = <1>;
-		ranges;
-
-		clocks = <&gcc GCC_PCIE_PHY_AUX_CLK>,
-			<&gcc GCC_PCIE_PHY_CFG_AHB_CLK>,
-			<&gcc GCC_PCIE_CLKREF_CLK>;
-		clock-names = "aux", "cfg_ahb", "ref";
-
-		vdda-phy-supply = <&pm8994_l28>;
-		vdda-pll-supply = <&pm8994_l12>;
-
-		resets = <&gcc GCC_PCIE_PHY_BCR>,
-			<&gcc GCC_PCIE_PHY_COM_BCR>,
-			<&gcc GCC_PCIE_PHY_COM_NOCSR_BCR>;
-		reset-names = "phy", "common", "cfg";
-
-		pciephy_0: lane@35000 {
-			reg = <0x35000 0x130>,
-				<0x35200 0x200>,
-				<0x35400 0x1dc>;
-			#clock-cells = <0>;
-			#phy-cells = <0>;
-
-			clocks = <&gcc GCC_PCIE_0_PIPE_CLK>;
-			clock-names = "pipe0";
-			clock-output-names = "pcie_0_pipe_clk_src";
-			resets = <&gcc GCC_PCIE_0_PHY_BCR>;
-			reset-names = "lane0";
-		};
-
-		pciephy_1: lane@36000 {
-		...
-		...
-	};
-
-	phy@88eb000 {
-		compatible = "qcom,sdm845-qmp-usb3-uni-phy";
-		reg = <0x88eb000 0x18c>;
-		#address-cells = <1>;
-		#size-cells = <1>;
-		ranges;
-
-		clocks = <&gcc GCC_USB3_SEC_PHY_AUX_CLK>,
-			 <&gcc GCC_USB_PHY_CFG_AHB2PHY_CLK>,
-			 <&gcc GCC_USB3_SEC_CLKREF_CLK>,
-			 <&gcc GCC_USB3_SEC_PHY_COM_AUX_CLK>;
-		clock-names = "aux", "cfg_ahb", "ref", "com_aux";
-
-		resets = <&gcc GCC_USB3PHY_PHY_SEC_BCR>,
-			 <&gcc GCC_USB3_PHY_SEC_BCR>;
-		reset-names = "phy", "common";
-
-		lane@88eb200 {
-			reg = <0x88eb200 0x128>,
-			      <0x88eb400 0x1fc>,
-			      <0x88eb800 0x218>,
-			      <0x88eb600 0x70>;
-			#clock-cells = <0>;
-			#phy-cells = <0>;
-			clocks = <&gcc GCC_USB3_SEC_PHY_PIPE_CLK>;
-			clock-names = "pipe0";
-			clock-output-names = "usb3_uni_phy_pipe_clk_src";
-		};
-	};
-
-	phy@1d87000 {
-		compatible = "qcom,sdm845-qmp-ufs-phy";
-		reg = <0x1d87000 0x18c>;
-		#address-cells = <1>;
-		#size-cells = <1>;
-		ranges;
-		clock-names = "ref",
-			      "ref_aux";
-		clocks = <&gcc GCC_UFS_MEM_CLKREF_CLK>,
-			 <&gcc GCC_UFS_PHY_PHY_AUX_CLK>;
-
-		lanes@1d87400 {
-			reg = <0x1d87400 0x108>,
-			      <0x1d87600 0x1e0>,
-			      <0x1d87c00 0x1dc>,
-			      <0x1d87800 0x108>,
-			      <0x1d87a00 0x1e0>;
-			#phy-cells = <0>;
-		};
-	};
diff --git a/Documentation/devicetree/bindings/phy/qcom-usb-ipq4019-phy.yaml b/Documentation/devicetree/bindings/phy/qcom-usb-ipq4019-phy.yaml
new file mode 100644
index 000000000000..1118fe69b611
--- /dev/null
+++ b/Documentation/devicetree/bindings/phy/qcom-usb-ipq4019-phy.yaml
@@ -0,0 +1,50 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: "http://devicetree.org/schemas/phy/qcom-usb-ipq4019-phy.yaml#"
+$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+
+title: Qualcom IPQ40xx Dakota HS/SS USB PHY
+
+maintainers:
+  - Robert Marko <robert.marko@sartura.hr>
+
+properties:
+  compatible:
+    enum:
+      - qcom,usb-ss-ipq4019-phy
+      - qcom,usb-hs-ipq4019-phy
+
+  reg:
+    maxItems: 1
+
+  resets:
+    maxItems: 2
+
+  reset-names:
+    items:
+      - const: por_rst
+      - const: srif_rst
+
+  "#phy-cells":
+    const: 0
+
+required:
+  - compatible
+  - reg
+  - resets
+  - reset-names
+  - "#phy-cells"
+
+examples:
+  - |
+    #include <dt-bindings/clock/qcom,gcc-ipq4019.h>
+
+    hsphy@a8000 {
+      #phy-cells = <0>;
+      compatible = "qcom,usb-hs-ipq4019-phy";
+      reg = <0xa8000 0x40>;
+      resets = <&gcc USB2_HSPHY_POR_ARES>,
+               <&gcc USB2_HSPHY_S_ARES>;
+      reset-names = "por_rst", "srif_rst";
+    };
diff --git a/Documentation/devicetree/bindings/phy/rcar-gen3-phy-usb2.txt b/Documentation/devicetree/bindings/phy/rcar-gen3-phy-usb2.txt
deleted file mode 100644
index 7734b219d9aa..000000000000
--- a/Documentation/devicetree/bindings/phy/rcar-gen3-phy-usb2.txt
+++ /dev/null
@@ -1,70 +0,0 @@
-* Renesas R-Car generation 3 USB 2.0 PHY
-
-This file provides information on what the device node for the R-Car generation
-3, RZ/G1C, RZ/G2 and RZ/A2 USB 2.0 PHY contain.
-
-Required properties:
-- compatible: "renesas,usb2-phy-r7s9210" if the device is a part of an R7S9210
-	      SoC.
-	      "renesas,usb2-phy-r8a77470" if the device is a part of an R8A77470
-	      SoC.
-	      "renesas,usb2-phy-r8a774a1" if the device is a part of an R8A774A1
-	      SoC.
-	      "renesas,usb2-phy-r8a774b1" if the device is a part of an R8A774B1
-	      SoC.
-	      "renesas,usb2-phy-r8a774c0" if the device is a part of an R8A774C0
-	      SoC.
-	      "renesas,usb2-phy-r8a7795" if the device is a part of an R8A7795
-	      SoC.
-	      "renesas,usb2-phy-r8a7796" if the device is a part of an R8A7796
-	      SoC.
-	      "renesas,usb2-phy-r8a77965" if the device is a part of an
-	      R8A77965 SoC.
-	      "renesas,usb2-phy-r8a77990" if the device is a part of an
-	      R8A77990 SoC.
-	      "renesas,usb2-phy-r8a77995" if the device is a part of an
-	      R8A77995 SoC.
-	      "renesas,rcar-gen3-usb2-phy" for a generic R-Car Gen3, RZ/G2 or
-	      RZ/A2 compatible device.
-
-	      When compatible with the generic version, nodes must list the
-	      SoC-specific version corresponding to the platform first
-	      followed by the generic version.
-
-- reg: offset and length of the partial USB 2.0 Host register block.
-- clocks: clock phandle and specifier pair(s).
-- #phy-cells: see phy-bindings.txt in the same directory, must be <1> (and
-	      using <0> is deprecated).
-
-The phandle's argument in the PHY specifier is the INT_STATUS bit of controller:
-- 1 = USBH_INTA (OHCI)
-- 2 = USBH_INTB (EHCI)
-- 3 = UCOM_INT (OTG and BC)
-
-Optional properties:
-To use a USB channel where USB 2.0 Host and HSUSB (USB 2.0 Peripheral) are
-combined, the device tree node should set interrupt properties to use the
-channel as USB OTG:
-- interrupts: interrupt specifier for the PHY.
-- vbus-supply: Phandle to a regulator that provides power to the VBUS. This
-	       regulator will be managed during the PHY power on/off sequence.
-- renesas,no-otg-pins: boolean, specify when a board does not provide proper
-		       otg pins.
-- dr_mode: string, indicates the working mode for the PHY. Can be "host",
-           "peripheral", or "otg". Should be set if otg controller is not used.
-
-
-Example (R-Car H3):
-
-	usb-phy@ee080200 {
-		compatible = "renesas,usb2-phy-r8a7795", "renesas,rcar-gen3-usb2-phy";
-		reg = <0 0xee080200 0 0x700>;
-		interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>;
-		clocks = <&cpg CPG_MOD 703>;
-	};
-
-	usb-phy@ee0a0200 {
-		compatible = "renesas,usb2-phy-r8a7795", "renesas,rcar-gen3-usb2-phy";
-		reg = <0 0xee0a0200 0 0x700>;
-		clocks = <&cpg CPG_MOD 702>;
-	};
diff --git a/Documentation/devicetree/bindings/phy/rcar-gen3-phy-usb3.txt b/Documentation/devicetree/bindings/phy/rcar-gen3-phy-usb3.txt
deleted file mode 100644
index 0fe433b9a592..000000000000
--- a/Documentation/devicetree/bindings/phy/rcar-gen3-phy-usb3.txt
+++ /dev/null
@@ -1,52 +0,0 @@
-* Renesas R-Car generation 3 USB 3.0 PHY
-
-This file provides information on what the device node for the R-Car generation
-3 and RZ/G2 USB 3.0 PHY contain.
-If you want to enable spread spectrum clock (ssc), you should use USB_EXTAL
-instead of USB3_CLK. However, if you don't want to these features, you don't
-need this driver.
-
-Required properties:
-- compatible: "renesas,r8a774a1-usb3-phy" if the device is a part of an R8A774A1
-	      SoC.
-	      "renesas,r8a774b1-usb3-phy" if the device is a part of an R8A774B1
-	      SoC.
-	      "renesas,r8a7795-usb3-phy" if the device is a part of an R8A7795
-	      SoC.
-	      "renesas,r8a7796-usb3-phy" if the device is a part of an R8A7796
-	      SoC.
-	      "renesas,r8a77965-usb3-phy" if the device is a part of an
-	      R8A77965 SoC.
-	      "renesas,rcar-gen3-usb3-phy" for a generic R-Car Gen3 or RZ/G2
-	      compatible device.
-
-	      When compatible with the generic version, nodes must list the
-	      SoC-specific version corresponding to the platform first
-	      followed by the generic version.
-
-- reg: offset and length of the USB 3.0 PHY register block.
-- clocks: A list of phandles and clock-specifier pairs.
-- clock-names: Name of the clocks.
-  - The funcional clock must be "usb3-if".
-  - The usb3's external clock must be "usb3s_clk".
-  - The usb2's external clock must be "usb_extal". If you want to use the ssc,
-    the clock-frequency must not be 0.
-- #phy-cells: see phy-bindings.txt in the same directory, must be <0>.
-
-Optional properties:
-- renesas,ssc-range: Enable/disable spread spectrum clock (ssc) by using
-		     the following values as u32:
-			- 0 (or the property doesn't exist): disable the ssc
-			- 4980: enable the ssc as -4980 ppm
-			- 4492: enable the ssc as -4492 ppm
-			- 4003: enable the ssc as -4003 ppm
-
-Example (R-Car H3):
-
-	usb-phy@e65ee000 {
-		compatible = "renesas,r8a7795-usb3-phy",
-			     "renesas,rcar-gen3-usb3-phy";
-		reg = <0 0xe65ee000 0 0x90>;
-		clocks = <&cpg CPG_MOD 328>, <&usb3s0_clk>, <&usb_extal>;
-		clock-names = "usb3-if", "usb3s_clk", "usb_extal";
-	};
diff --git a/Documentation/devicetree/bindings/phy/renesas,usb2-phy.yaml b/Documentation/devicetree/bindings/phy/renesas,usb2-phy.yaml
new file mode 100644
index 000000000000..440f09fddf93
--- /dev/null
+++ b/Documentation/devicetree/bindings/phy/renesas,usb2-phy.yaml
@@ -0,0 +1,117 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/phy/renesas,usb2-phy.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Renesas R-Car generation 3 USB 2.0 PHY
+
+maintainers:
+  - Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
+
+properties:
+  compatible:
+    oneOf:
+      - items:
+          - const: renesas,usb2-phy-r8a77470 # RZ/G1C
+
+      - items:
+          - enum:
+              - renesas,usb2-phy-r7s9210  # RZ/A2
+              - renesas,usb2-phy-r8a774a1 # RZ/G2M
+              - renesas,usb2-phy-r8a774b1 # RZ/G2N
+              - renesas,usb2-phy-r8a774c0 # RZ/G2E
+              - renesas,usb2-phy-r8a7795  # R-Car H3
+              - renesas,usb2-phy-r8a7796  # R-Car M3-W
+              - renesas,usb2-phy-r8a77961 # R-Car M3-W+
+              - renesas,usb2-phy-r8a77965 # R-Car M3-N
+              - renesas,usb2-phy-r8a77990 # R-Car E3
+              - renesas,usb2-phy-r8a77995 # R-Car D3
+          - const: renesas,rcar-gen3-usb2-phy
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    minItems: 1
+    maxItems: 2
+
+  clock-names:
+    minItems: 1
+    maxItems: 2
+    items:
+      - const: fck
+      - const: usb_x1
+
+  '#phy-cells':
+    enum: [0, 1]  # and 0 is deprecated.
+    description: |
+      The phandle's argument in the PHY specifier is the INT_STATUS bit of
+      controller.
+      - 1 = USBH_INTA (OHCI)
+      - 2 = USBH_INTB (EHCI)
+      - 3 = UCOM_INT (OTG and BC)
+
+  interrupts:
+    maxItems: 1
+
+  power-domains:
+    maxItems: 1
+
+  resets:
+    minItems: 1
+    maxItems: 2
+    items:
+      - description: reset of USB 2.0 host side
+      - description: reset of USB 2.0 peripheral side
+
+  vbus-supply:
+    description: |
+      Phandle to a regulator that provides power to the VBUS. This regulator
+      will be managed during the PHY power on/off sequence.
+
+  renesas,no-otg-pins:
+    $ref: /schemas/types.yaml#/definitions/flag
+    description: |
+      specify when a board does not provide proper otg pins.
+
+  dr_mode: true
+
+if:
+  properties:
+    compatible:
+      items:
+        enum:
+          - renesas,usb2-phy-r7s9210
+then:
+  required:
+    - clock-names
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - '#phy-cells'
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/r8a7795-cpg-mssr.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/power/r8a7795-sysc.h>
+
+    usb-phy@ee080200 {
+        compatible = "renesas,usb2-phy-r8a7795", "renesas,rcar-gen3-usb2-phy";
+        reg = <0xee080200 0x700>;
+        interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>;
+        clocks = <&cpg CPG_MOD 703>;
+        #phy-cells = <1>;
+    };
+
+    usb-phy@ee0a0200 {
+        compatible = "renesas,usb2-phy-r8a7795", "renesas,rcar-gen3-usb2-phy";
+        reg = <0xee0a0200 0x700>;
+        clocks = <&cpg CPG_MOD 702>;
+        #phy-cells = <1>;
+    };
diff --git a/Documentation/devicetree/bindings/phy/renesas,usb3-phy.yaml b/Documentation/devicetree/bindings/phy/renesas,usb3-phy.yaml
new file mode 100644
index 000000000000..f459eaf55278
--- /dev/null
+++ b/Documentation/devicetree/bindings/phy/renesas,usb3-phy.yaml
@@ -0,0 +1,79 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/phy/renesas,usb3-phy.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Renesas R-Car generation 3 USB 3.0 PHY
+
+maintainers:
+  - Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
+
+properties:
+  compatible:
+    items:
+      - enum:
+          - renesas,r8a774a1-usb3-phy # RZ/G2M
+          - renesas,r8a774b1-usb3-phy # RZ/G2N
+          - renesas,r8a7795-usb3-phy  # R-Car H3
+          - renesas,r8a7796-usb3-phy  # R-Car M3-W
+          - renesas,r8a77961-usb3-phy # R-Car M3-W+
+          - renesas,r8a77965-usb3-phy # R-Car M3-N
+      - const: renesas,rcar-gen3-usb3-phy
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    minItems: 2
+    maxItems: 3
+
+  clock-names:
+    # If you want to use the ssc, the clock-frequency of usb_extal
+    # must not be 0.
+    minItems: 2
+    maxItems: 3
+    items:
+      - const: usb3-if # The funcional clock
+      - const: usb3s_clk # The usb3's external clock
+      - const: usb_extal # The usb2's external clock
+
+  '#phy-cells':
+    # see phy-bindings.txt in the same directory
+    const: 0
+
+  power-domains:
+    maxItems: 1
+
+  resets:
+    maxItems: 1
+
+  renesas,ssc-range:
+    description: |
+      Enable/disable spread spectrum clock (ssc). 0 or the property doesn't
+      exist means disabling the ssc. The actual value will be -<value> ppm.
+    allOf:
+      - $ref: /schemas/types.yaml#/definitions/uint32
+      - enum: [ 0, 4003, 4492, 4980 ]
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - clock-names
+  - '#phy-cells'
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/r8a7795-cpg-mssr.h>
+    #include <dt-bindings/power/r8a7795-sysc.h>
+
+    usb-phy@e65ee000 {
+        compatible = "renesas,r8a7795-usb3-phy", "renesas,rcar-gen3-usb3-phy";
+        reg = <0xe65ee000 0x90>;
+        clocks = <&cpg CPG_MOD 328>, <&usb3s0_clk>, <&usb_extal>;
+        clock-names = "usb3-if", "usb3s_clk", "usb_extal";
+        #phy-cells = <0>;
+    };