Merge tag 'usb-5.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb

Pull USB/PHY/Thunderbolt driver updates from Greg KH:
 "Here is the big set of USB, PHY, and Thunderbolt driver updates for
  5.10-rc1.

  Lots of tiny different things for these subsystems are in here,
  including:

   - phy driver updates

   - thunderbolt / USB 4 updates and additions

   - USB gadget driver updates

   - xhci fixes and updates

   - typec driver additions and updates

   - api conversions to various drivers for core kernel api changes

   - new USB control message functions to make it harder to get wrong,
     as found by syzbot (took 2 tries to get it right)

   - lots of tiny USB driver fixes and updates all over the place

  All of these have been in linux-next for a while, with the exception
  of the last "obviously correct" patch that updated a FALLTHROUGH
  comment that got merged last weekend"

* tag 'usb-5.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (374 commits)
  usb: musb: gadget: Use fallthrough pseudo-keyword
  usb: typec: Add QCOM PMIC typec detection driver
  USB: serial: option: add Cellient MPL200 card
  usb: typec: tcpci_maxim: Add support for Sink FRS
  usb: typec: tcpci: Implement callbacks for FRS
  usb: typec: tcpm: Add support for Sink Fast Role SWAP(FRS)
  usb: typec: tcpci_maxim: Chip level TCPC driver
  usb: typec: tcpci: Add set_vbus tcpci callback
  usb: typec: tcpci: Add a getter method to retrieve tcpm_port reference
  usbip: vhci_hcd: fix calling usb_hcd_giveback_urb() with irqs enabled
  usb: cdc-acm: add quirk to blacklist ETAS ES58X devices
  USB: serial: ftdi_sio: use cur_altsetting for consistency
  USB: serial: option: Add Telit FT980-KS composition
  USB: core: remove polling for /sys/kernel/debug/usb/devices
  usb: typec: add support for STUSB160x Type-C controller family
  usb: typec: add typec_find_pwr_opmode
  usb: typec: hd3ss3220: Use OF graph API to get the connector fwnode
  dt-bindings: usb: renesas,usb3-peri: Document HS and SS data bus
  dt-bindings: usb: convert ti,hd3ss3220 bindings to json-schema
  usb: dwc2: Fix INTR OUT transfers in DDMA mode.
  ...

9 files changed, 398 insertions, 70 deletions

diff --git a/Documentation/devicetree/bindings/phy/fsl,imx8mq-usb-phy.txt b/Documentation/devicetree/bindings/phy/fsl,imx8mq-usb-phy.txt
index ed47e5cd067e..7c70f2ad9942 100644
--- a/Documentation/devicetree/bindings/phy/fsl,imx8mq-usb-phy.txt
+++ b/Documentation/devicetree/bindings/phy/fsl,imx8mq-usb-phy.txt
@@ -1,7 +1,7 @@
 * Freescale i.MX8MQ USB3 PHY binding
 
 Required properties:
-- compatible:	Should be "fsl,imx8mq-usb-phy"
+- compatible:	Should be "fsl,imx8mq-usb-phy" or "fsl,imx8mp-usb-phy"
 - #phys-cells:	must be 0 (see phy-bindings.txt in this directory)
 - reg:		The base address and length of the registers
 - clocks:	phandles to the clocks for each clock listed in clock-names
diff --git a/Documentation/devicetree/bindings/phy/intel,lgm-emmc-phy.yaml b/Documentation/devicetree/bindings/phy/intel,lgm-emmc-phy.yaml
index 77bb5309918e..edd9d70a672a 100644
--- a/Documentation/devicetree/bindings/phy/intel,lgm-emmc-phy.yaml
+++ b/Documentation/devicetree/bindings/phy/intel,lgm-emmc-phy.yaml
@@ -23,7 +23,9 @@ description: |+
 
 properties:
   compatible:
-    const: intel,lgm-emmc-phy
+    oneOf:
+      - const: intel,lgm-emmc-phy
+      - const: intel,keembay-emmc-phy
 
   "#phy-cells":
     const: 0
@@ -34,6 +36,10 @@ properties:
   clocks:
     maxItems: 1
 
+  clock-names:
+    items:
+      - const: emmcclk
+
 required:
   - "#phy-cells"
   - compatible
@@ -57,4 +63,13 @@ examples:
         #phy-cells = <0>;
       };
     };
+
+  - |
+    phy@20290000 {
+          compatible = "intel,keembay-emmc-phy";
+          reg = <0x20290000 0x54>;
+          clocks = <&emmc>;
+          clock-names = "emmcclk";
+          #phy-cells = <0>;
+    };
 ...
diff --git a/Documentation/devicetree/bindings/phy/intel,lgm-usb-phy.yaml b/Documentation/devicetree/bindings/phy/intel,lgm-usb-phy.yaml
new file mode 100644
index 000000000000..ce62c0b94daf
--- /dev/null
+++ b/Documentation/devicetree/bindings/phy/intel,lgm-usb-phy.yaml
@@ -0,0 +1,58 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/phy/intel,lgm-usb-phy.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Intel LGM USB PHY Device Tree Bindings
+
+maintainers:
+  - Vadivel Murugan Ramuthevar <vadivel.muruganx.ramuthevar@linux.intel.com>
+
+properties:
+  compatible:
+    const: intel,lgm-usb-phy
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  resets:
+    items:
+      - description: USB PHY and Host controller reset
+      - description: APB BUS reset
+      - description: General Hardware reset
+
+  reset-names:
+    items:
+      - const: phy
+      - const: apb
+      - const: phy31
+
+  "#phy-cells":
+    const: 0
+
+required:
+  - compatible
+  - clocks
+  - reg
+  - resets
+  - reset-names
+  - "#phy-cells"
+
+additionalProperties: false
+
+examples:
+  - |
+    usb-phy@e7e00000 {
+        compatible = "intel,lgm-usb-phy";
+        reg = <0xe7e00000 0x10000>;
+        clocks = <&cgu0 153>;
+        resets = <&rcu 0x70 0x24>,
+                 <&rcu 0x70 0x26>,
+                 <&rcu 0x70 0x28>;
+        reset-names = "phy", "apb", "phy31";
+        #phy-cells = <0>;
+    };
diff --git a/Documentation/devicetree/bindings/phy/phy-cadence-torrent.yaml b/Documentation/devicetree/bindings/phy/phy-cadence-torrent.yaml
index 4071438be2ba..e266ade53d87 100644
--- a/Documentation/devicetree/bindings/phy/phy-cadence-torrent.yaml
+++ b/Documentation/devicetree/bindings/phy/phy-cadence-torrent.yaml
@@ -4,11 +4,13 @@
 $id: "http://devicetree.org/schemas/phy/phy-cadence-torrent.yaml#"
 $schema: "http://devicetree.org/meta-schemas/core.yaml#"
 
-title: Cadence Torrent SD0801 PHY binding for DisplayPort
+title: Cadence Torrent SD0801 PHY binding
 
 description:
   This binding describes the Cadence SD0801 PHY (also known as Torrent PHY)
-  hardware included with the Cadence MHDP DisplayPort controller.
+  hardware included with the Cadence MHDP DisplayPort controller. Torrent
+  PHY also supports multilink multiprotocol combinations including protocols
+  such as PCIe, USB, SGMII, QSGMII etc.
 
 maintainers:
   - Swapnil Jakhade <sjakhade@cadence.com>
@@ -49,13 +51,21 @@ properties:
       - const: dptx_phy
 
   resets:
-    maxItems: 1
-    description:
-      Torrent PHY reset.
-      See Documentation/devicetree/bindings/reset/reset.txt
+    minItems: 1
+    maxItems: 2
+    items:
+      - description: Torrent PHY reset.
+      - description: Torrent APB reset. This is optional.
+
+  reset-names:
+    minItems: 1
+    maxItems: 2
+    items:
+      - const: torrent_reset
+      - const: torrent_apb
 
 patternProperties:
-  '^phy@[0-7]+$':
+  '^phy@[0-3]$':
     type: object
     description:
       Each group of PHY lanes with a single master lane should be represented as a sub-node.
@@ -63,6 +73,8 @@ patternProperties:
       reg:
         description:
           The master lane number. This is the lowest numbered lane in the lane group.
+        minimum: 0
+        maximum: 3
 
       resets:
         minItems: 1
@@ -78,15 +90,25 @@ patternProperties:
           Specifies the type of PHY for which the group of PHY lanes is used.
           Refer include/dt-bindings/phy/phy.h. Constants from the header should be used.
         $ref: /schemas/types.yaml#/definitions/uint32
-        enum: [1, 2, 3, 4, 5, 6]
+        minimum: 1
+        maximum: 9
 
       cdns,num-lanes:
         description:
-          Number of DisplayPort lanes.
+          Number of lanes.
         $ref: /schemas/types.yaml#/definitions/uint32
-        enum: [1, 2, 4]
+        enum: [1, 2, 3, 4]
         default: 4
 
+      cdns,ssc-mode:
+        description:
+          Specifies the Spread Spectrum Clocking mode used. It can be NO_SSC,
+          EXTERNAL_SSC or INTERNAL_SSC.
+          Refer include/dt-bindings/phy/phy-cadence-torrent.h for the constants to be used.
+        $ref: /schemas/types.yaml#/definitions/uint32
+        enum: [0, 1, 2]
+        default: 0
+
       cdns,max-bit-rate:
         description:
           Maximum DisplayPort link bit rate to use, in Mbps
@@ -99,6 +121,7 @@ patternProperties:
       - resets
       - "#phy-cells"
       - cdns,phy-type
+      - cdns,num-lanes
 
     additionalProperties: false
 
@@ -111,6 +134,7 @@ required:
   - reg
   - reg-names
   - resets
+  - reset-names
 
 additionalProperties: false
 
@@ -128,18 +152,56 @@ examples:
                   <0xf0 0xfb030a00 0x0 0x00000040>;
             reg-names = "torrent_phy", "dptx_phy";
             resets = <&phyrst 0>;
+            reset-names = "torrent_reset";
             clocks = <&ref_clk>;
             clock-names = "refclk";
             #address-cells = <1>;
             #size-cells = <0>;
             phy@0 {
-                      reg = <0>;
-                      resets = <&phyrst 1>, <&phyrst 2>,
-                               <&phyrst 3>, <&phyrst 4>;
-                      #phy-cells = <0>;
-                      cdns,phy-type = <PHY_TYPE_DP>;
-                      cdns,num-lanes = <4>;
-                      cdns,max-bit-rate = <8100>;
+                reg = <0>;
+                resets = <&phyrst 1>, <&phyrst 2>,
+                         <&phyrst 3>, <&phyrst 4>;
+                #phy-cells = <0>;
+                cdns,phy-type = <PHY_TYPE_DP>;
+                cdns,num-lanes = <4>;
+                cdns,max-bit-rate = <8100>;
+            };
+        };
+    };
+  - |
+    #include <dt-bindings/phy/phy.h>
+    #include <dt-bindings/phy/phy-cadence-torrent.h>
+
+    bus {
+        #address-cells = <2>;
+        #size-cells = <2>;
+
+        torrent-phy@f0fb500000 {
+            compatible = "cdns,torrent-phy";
+            reg = <0xf0 0xfb500000 0x0 0x00100000>;
+            reg-names = "torrent_phy";
+            resets = <&phyrst 0>, <&phyrst 1>;
+            reset-names = "torrent_reset", "torrent_apb";
+            clocks = <&ref_clk>;
+            clock-names = "refclk";
+            #address-cells = <1>;
+            #size-cells = <0>;
+            phy@0 {
+                reg = <0>;
+                resets = <&phyrst 2>, <&phyrst 3>;
+                #phy-cells = <0>;
+                cdns,phy-type = <PHY_TYPE_PCIE>;
+                cdns,num-lanes = <2>;
+                cdns,ssc-mode = <TORRENT_SERDES_NO_SSC>;
+            };
+
+            phy@2 {
+                reg = <2>;
+                resets = <&phyrst 4>;
+                #phy-cells = <0>;
+                cdns,phy-type = <PHY_TYPE_SGMII>;
+                cdns,num-lanes = <1>;
+                cdns,ssc-mode = <TORRENT_SERDES_NO_SSC>;
             };
         };
     };
diff --git a/Documentation/devicetree/bindings/phy/qcom,qmp-usb3-dp-phy.yaml b/Documentation/devicetree/bindings/phy/qcom,qmp-usb3-dp-phy.yaml
index ef8ae9f73092..33974ad10afe 100644
--- a/Documentation/devicetree/bindings/phy/qcom,qmp-usb3-dp-phy.yaml
+++ b/Documentation/devicetree/bindings/phy/qcom,qmp-usb3-dp-phy.yaml
@@ -13,17 +13,21 @@ maintainers:
 properties:
   compatible:
     enum:
+      - qcom,sc7180-qmp-usb3-dp-phy
       - qcom,sc7180-qmp-usb3-phy
+      - qcom,sdm845-qmp-usb3-dp-phy
       - qcom,sdm845-qmp-usb3-phy
   reg:
     items:
-      - description: Address and length of PHY's common serdes block.
+      - description: Address and length of PHY's USB serdes block.
       - description: Address and length of the DP_COM control block.
+      - description: Address and length of PHY's DP serdes block.
 
   reg-names:
     items:
-      - const: reg-base
+      - const: usb
       - const: dp_com
+      - const: dp
 
   "#clock-cells":
     enum: [ 1, 2 ]
@@ -74,16 +78,74 @@ properties:
 
 #Required nodes:
 patternProperties:
-  "^phy@[0-9a-f]+$":
+  "^usb3-phy@[0-9a-f]+$":
     type: object
     description:
-      Each device node of QMP phy is required to have as many child nodes as
-      the number of lanes the PHY has.
+      The USB3 PHY.
+
+    properties:
+      reg:
+        items:
+          - description: Address and length of TX.
+          - description: Address and length of RX.
+          - description: Address and length of PCS.
+          - description: Address and length of TX2.
+          - description: Address and length of RX2.
+          - description: Address and length of pcs_misc.
+
+      clocks:
+        items:
+          - description: pipe clock
+
+      clock-names:
+        items:
+          - const: pipe0
+
+      clock-output-names:
+        items:
+          - const: usb3_phy_pipe_clk_src
+
+      '#clock-cells':
+        const: 0
+
+      '#phy-cells':
+        const: 0
+
+    required:
+      - reg
+      - clocks
+      - clock-names
+      - '#clock-cells'
+      - '#phy-cells'
+
+  "^dp-phy@[0-9a-f]+$":
+    type: object
+    description:
+      The DP PHY.
+
+    properties:
+      reg:
+        items:
+          - description: Address and length of TX.
+          - description: Address and length of RX.
+          - description: Address and length of PCS.
+          - description: Address and length of TX2.
+          - description: Address and length of RX2.
+
+      '#clock-cells':
+        const: 1
+
+      '#phy-cells':
+        const: 0
+
+    required:
+      - reg
+      - '#clock-cells'
+      - '#phy-cells'
 
 required:
   - compatible
   - reg
-  - reg-names
   - "#clock-cells"
   - "#address-cells"
   - "#size-cells"
@@ -101,14 +163,15 @@ examples:
   - |
     #include <dt-bindings/clock/qcom,gcc-sdm845.h>
     usb_1_qmpphy: phy-wrapper@88e9000 {
-        compatible = "qcom,sdm845-qmp-usb3-phy";
+        compatible = "qcom,sdm845-qmp-usb3-dp-phy";
         reg = <0x088e9000 0x18c>,
-              <0x088e8000 0x10>;
-        reg-names = "reg-base", "dp_com";
+              <0x088e8000 0x10>,
+              <0x088ea000 0x40>;
+        reg-names = "usb", "dp_com", "dp";
         #clock-cells = <1>;
         #address-cells = <1>;
         #size-cells = <1>;
-        ranges = <0x0 0x088e9000 0x1000>;
+        ranges = <0x0 0x088e9000 0x2000>;
 
         clocks = <&gcc GCC_USB3_PRIM_PHY_AUX_CLK>,
                  <&gcc GCC_USB_PHY_CFG_AHB2PHY_CLK>,
@@ -123,7 +186,7 @@ examples:
         vdda-phy-supply = <&vdda_usb2_ss_1p2>;
         vdda-pll-supply = <&vdda_usb2_ss_core>;
 
-        phy@200 {
+        usb3-phy@200 {
             reg = <0x200 0x128>,
                   <0x400 0x200>,
                   <0xc00 0x218>,
@@ -136,4 +199,14 @@ examples:
             clock-names = "pipe0";
             clock-output-names = "usb3_phy_pipe_clk_src";
         };
+
+        dp-phy@88ea200 {
+            reg = <0xa200 0x200>,
+                  <0xa400 0x200>,
+                  <0xaa00 0x200>,
+                  <0xa600 0x200>,
+                  <0xa800 0x200>;
+            #clock-cells = <1>;
+            #phy-cells = <0>;
+        };
     };
diff --git a/Documentation/devicetree/bindings/phy/socionext,uniphier-ahci-phy.yaml b/Documentation/devicetree/bindings/phy/socionext,uniphier-ahci-phy.yaml
new file mode 100644
index 000000000000..bab2ff4d9dc9
--- /dev/null
+++ b/Documentation/devicetree/bindings/phy/socionext,uniphier-ahci-phy.yaml
@@ -0,0 +1,76 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/phy/socionext,uniphier-ahci-phy.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Socionext UniPhier AHCI PHY
+
+description: |
+  This describes the deivcetree bindings for PHY interfaces built into
+  AHCI controller implemented on Socionext UniPhier SoCs.
+
+maintainers:
+  - Kunihiko Hayashi <hayashi.kunihiko@socionext.com>
+
+properties:
+  compatible:
+    enum:
+      - socionext,uniphier-pxs2-ahci-phy
+      - socionext,uniphier-pxs3-ahci-phy
+
+  reg:
+    description: PHY register region (offset and length)
+
+  "#phy-cells":
+    const: 0
+
+  clocks:
+    maxItems: 2
+
+  clock-names:
+    oneOf:
+      - items:          # for PXs2
+        - const: link
+      - items:          # for others
+        - const: link
+        - const: phy
+
+  resets:
+    maxItems: 2
+
+  reset-names:
+    items:
+      - const: link
+      - const: phy
+
+required:
+  - compatible
+  - reg
+  - "#phy-cells"
+  - clocks
+  - clock-names
+  - resets
+  - reset-names
+
+additionalProperties: false
+
+examples:
+  - |
+    ahci-glue@65700000 {
+        compatible = "socionext,uniphier-pxs3-ahci-glue",
+                     "simple-mfd";
+        #address-cells = <1>;
+        #size-cells = <1>;
+        ranges = <0 0x65700000 0x100>;
+
+        ahci_phy: phy@10 {
+            compatible = "socionext,uniphier-pxs3-ahci-phy";
+            reg = <0x10 0x10>;
+            #phy-cells = <0>;
+            clock-names = "link", "phy";
+            clocks = <&sys_clk 28>, <&sys_clk 30>;
+            reset-names = "link", "phy";
+            resets = <&sys_rst 28>, <&sys_rst 30>;
+        };
+    };
diff --git a/Documentation/devicetree/bindings/phy/ti,omap-usb2.yaml b/Documentation/devicetree/bindings/phy/ti,omap-usb2.yaml
new file mode 100644
index 000000000000..15207ca9548f
--- /dev/null
+++ b/Documentation/devicetree/bindings/phy/ti,omap-usb2.yaml
@@ -0,0 +1,74 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/phy/ti,omap-usb2.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: OMAP USB2 PHY
+
+maintainers:
+ - Kishon Vijay Abraham I <kishon@ti.com>
+ - Roger Quadros <rogerq@ti.com>
+
+properties:
+  compatible:
+    oneOf:
+      - items:
+        - enum:
+          - ti,dra7x-usb2
+          - ti,dra7x-usb2-phy2
+          - ti,am654-usb2
+        - enum:
+          - ti,omap-usb2
+      - items:
+        - const: ti,am437x-usb2
+      - items:
+        - const: ti,omap-usb2
+
+  reg:
+    maxItems: 1
+
+  "#phy-cells":
+    const: 0
+
+  clocks:
+    minItems: 1
+    items:
+      - description: wakeup clock
+      - description: reference clock
+
+  clock-names:
+    minItems: 1
+    items:
+      - const: wkupclk
+      - const: refclk
+
+  syscon-phy-power:
+    $ref: /schemas/types.yaml#definitions/phandle-array
+    description:
+      phandle/offset pair. Phandle to the system control module and
+      register offset to power on/off the PHY.
+
+  ctrl-module:
+    $ref: /schemas/types.yaml#definitions/phandle
+    description:
+      (deprecated) phandle of the control module used by PHY driver
+      to power on the PHY. Use syscon-phy-power instead.
+
+required:
+  - compatible
+  - reg
+  - "#phy-cells"
+  - clocks
+  - clock-names
+
+examples:
+  - |
+    usb0_phy: phy@4100000 {
+      compatible = "ti,am654-usb2", "ti,omap-usb2";
+      reg = <0x4100000 0x54>;
+      syscon-phy-power = <&scm_conf 0x4000>;
+      clocks = <&k3_clks 151 0>, <&k3_clks 151 1>;
+      clock-names = "wkupclk", "refclk";
+      #phy-cells = <0>;
+    };
diff --git a/Documentation/devicetree/bindings/phy/ti,phy-j721e-wiz.yaml b/Documentation/devicetree/bindings/phy/ti,phy-j721e-wiz.yaml
index 5ffc95c62909..c33e9bc79521 100644
--- a/Documentation/devicetree/bindings/phy/ti,phy-j721e-wiz.yaml
+++ b/Documentation/devicetree/bindings/phy/ti,phy-j721e-wiz.yaml
@@ -45,9 +45,15 @@ properties:
   ranges: true
 
   assigned-clocks:
+    minItems: 1
     maxItems: 2
 
   assigned-clock-parents:
+    minItems: 1
+    maxItems: 2
+
+  assigned-clock-rates:
+    minItems: 1
     maxItems: 2
 
   typec-dir-gpios:
@@ -119,9 +125,10 @@ patternProperties:
       logic.
     properties:
       clocks:
+        minItems: 2
         maxItems: 4
-        description: Phandle to four clock nodes representing the inputs to
-          refclk_dig
+        description: Phandle to two (Torrent) or four (Sierra) clock nodes representing
+          the inputs to refclk_dig
 
       "#clock-cells":
         const: 0
@@ -203,7 +210,7 @@ examples:
            };
 
            refclk-dig {
-                  clocks = <&k3_clks 292 11>, <&k3_clks 292 0>, 
+                  clocks = <&k3_clks 292 11>, <&k3_clks 292 0>,
                           <&dummy_cmn_refclk>, <&dummy_cmn_refclk1>;
                   #clock-cells = <0>;
                   assigned-clocks = <&wiz0_refclk_dig>;
diff --git a/Documentation/devicetree/bindings/phy/ti-phy.txt b/Documentation/devicetree/bindings/phy/ti-phy.txt
index 8f93c3b694a7..60c9d0ac75e6 100644
--- a/Documentation/devicetree/bindings/phy/ti-phy.txt
+++ b/Documentation/devicetree/bindings/phy/ti-phy.txt
@@ -27,43 +27,6 @@ omap_control_usb: omap-control-usb@4a002300 {
         reg-names = "otghs_control";
 };
 
-OMAP USB2 PHY
-
-Required properties:
- - compatible: Should be "ti,omap-usb2"
-	       Should be "ti,dra7x-usb2" for the 1st instance of USB2 PHY on
-	       DRA7x
-	       Should be "ti,dra7x-usb2-phy2" for the 2nd instance of USB2 PHY
-	       in DRA7x
-	       Should be "ti,am654-usb2" for the USB2 PHYs on AM654.
- - reg : Address and length of the register set for the device.
- - #phy-cells: determine the number of cells that should be given in the
-   phandle while referencing this phy.
- - clocks: a list of phandles and clock-specifier pairs, one for each entry in
-   clock-names.
- - clock-names: should include:
-   * "wkupclk" - wakeup clock.
-   * "refclk" - reference clock (optional).
-
-Deprecated properties:
- - ctrl-module : phandle of the control module used by PHY driver to power on
-   the PHY.
-
-Recommended properies:
-- syscon-phy-power : phandle/offset pair. Phandle to the system control
-  module and the register offset to power on/off the PHY.
-
-This is usually a subnode of ocp2scp to which it is connected.
-
-usb2phy@4a0ad080 {
-	compatible = "ti,omap-usb2";
-	reg = <0x4a0ad080 0x58>;
-	ctrl-module = <&omap_control_usb>;
-	#phy-cells = <0>;
-	clocks = <&usb_phy_cm_clk32k>, <&usb_otg_ss_refclk960m>;
-	clock-names = "wkupclk", "refclk";
-};
-
 TI PIPE3 PHY
 
 Required properties: