Merge tag 'phy-for-5.8' of git://git.kernel.org/pub/scm/linux/kernel/git/phy/linux-phy into usb-next

Kishon writes:

phy: for 5.8

*) Add new PHY driver to support Cadence SALVO PHY which supports USB3 & USB2
*) Add new PHY driver to support Intel ComboPhy which supports PCIe, SATA and
   EMAC
*) Add new PHY driver for Qualcomm IPQ40xx USB PHY
*) Add new PHY driver for Synopsys FemtoPHY V2 driver used in Qualcomm SOCs
*) Add support for Qualcomm SM8250 UFS PHY and SM8150 QMP USB3 PHY in
   qcom-qmp-phy driver
*) Add support for Amlogic USB2 PHY on Meson8m2 in phy-meson8b-usb2 driver
*) Add DisplayPort mode support in Wiz (TI Cadence PHY wrapper), to enable eDP
   in TI's J721E SoC
*) Add support for super speed USB PHY in TI's AM654 SoC
*) Add fix in Broadcom Stingray USB PHY to get USB PHY PLL lock reliably
*) Add fix in Samsung phy-s5pv210-usb2 to get USB working on s5pv210
*) Add fix in Amlogic phy-meson8b-usb2 to get host only mode working on Meson8
*) Add fix in Cadence phy-cadence-sierra to get USB3 device disconnect issue
*) Convert meson8b-usb2-phy, qcom-qmp-phy, rcar-gen3-phy-usb2 and
   rcar-gen3-phy-usb3 device tree binding to YAML schema
*) Minor fixes and cleanups in phy-cpcap-usb, j721e-wiz, omap-usb2,
   phy-bcm-sr-usb, phy-brcm-usb PHY driver

Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>

* tag 'phy-for-5.8' of git://git.kernel.org/pub/scm/linux/kernel/git/phy/linux-phy: (43 commits)
  phy: intel: Add driver support for ComboPhy
  dt-bindings: phy: Add YAML schemas for Intel ComboPhy
  dt-bindings: phy: Add PHY_TYPE_XPCS definition
  phy: qcom-qmp: Add QMP V3 USB3 PHY support for SC7180
  dt-bindings: phy: qcom,qmp-usb3-dp: Add support for SC7180
  dt-bindings: phy: qcom,qmp-usb3-dp: Add dt bindings for USB3 DP PHY
  dt-bindings: phy: qcom,qmp: Convert QMP PHY bindings to yaml
  phy: cadence: sierra: Fix for USB3 U1/U2 state
  phy: ti: am654: add support for USB super-speed
  phy: ti: am654: show up in regmap debugfs
  drivers: phy: sr-usb: do not use internal fsm for USB2 phy init
  dt-bindings: phy: renesas: usb3-phy: add r8a77961 support
  dt-bindings: phy: renesas: usb3-phy: convert bindings to json-schema
  dt-bindings: phy: renesas: usb2-phy: add r8a77961 support
  dt-bindings: phy: renesas: usb2-phy: convert bindings to json-schema
  phy: qcom-qmp: Ensure register indirection arrays initialized
  phy: omap-usb2: Clean up exported header
  phy: phy-bcm-ns2-usbdrd: Constify phy_ops
  phy: phy-brcm-usb: Constify static structs
  phy: sr-usb: Constify phy_ops
  ...

1 files changed, 0 insertions, 70 deletions

diff --git a/Documentation/devicetree/bindings/phy/rcar-gen3-phy-usb2.txt b/Documentation/devicetree/bindings/phy/rcar-gen3-phy-usb2.txt
deleted file mode 100644
index 7734b219d9aa..000000000000
--- a/Documentation/devicetree/bindings/phy/rcar-gen3-phy-usb2.txt
+++ /dev/null
@@ -1,70 +0,0 @@
-* Renesas R-Car generation 3 USB 2.0 PHY
-
-This file provides information on what the device node for the R-Car generation
-3, RZ/G1C, RZ/G2 and RZ/A2 USB 2.0 PHY contain.
-
-Required properties:
-- compatible: "renesas,usb2-phy-r7s9210" if the device is a part of an R7S9210
-	      SoC.
-	      "renesas,usb2-phy-r8a77470" if the device is a part of an R8A77470
-	      SoC.
-	      "renesas,usb2-phy-r8a774a1" if the device is a part of an R8A774A1
-	      SoC.
-	      "renesas,usb2-phy-r8a774b1" if the device is a part of an R8A774B1
-	      SoC.
-	      "renesas,usb2-phy-r8a774c0" if the device is a part of an R8A774C0
-	      SoC.
-	      "renesas,usb2-phy-r8a7795" if the device is a part of an R8A7795
-	      SoC.
-	      "renesas,usb2-phy-r8a7796" if the device is a part of an R8A7796
-	      SoC.
-	      "renesas,usb2-phy-r8a77965" if the device is a part of an
-	      R8A77965 SoC.
-	      "renesas,usb2-phy-r8a77990" if the device is a part of an
-	      R8A77990 SoC.
-	      "renesas,usb2-phy-r8a77995" if the device is a part of an
-	      R8A77995 SoC.
-	      "renesas,rcar-gen3-usb2-phy" for a generic R-Car Gen3, RZ/G2 or
-	      RZ/A2 compatible device.
-
-	      When compatible with the generic version, nodes must list the
-	      SoC-specific version corresponding to the platform first
-	      followed by the generic version.
-
-- reg: offset and length of the partial USB 2.0 Host register block.
-- clocks: clock phandle and specifier pair(s).
-- #phy-cells: see phy-bindings.txt in the same directory, must be <1> (and
-	      using <0> is deprecated).
-
-The phandle's argument in the PHY specifier is the INT_STATUS bit of controller:
-- 1 = USBH_INTA (OHCI)
-- 2 = USBH_INTB (EHCI)
-- 3 = UCOM_INT (OTG and BC)
-
-Optional properties:
-To use a USB channel where USB 2.0 Host and HSUSB (USB 2.0 Peripheral) are
-combined, the device tree node should set interrupt properties to use the
-channel as USB OTG:
-- interrupts: interrupt specifier for the PHY.
-- vbus-supply: Phandle to a regulator that provides power to the VBUS. This
-	       regulator will be managed during the PHY power on/off sequence.
-- renesas,no-otg-pins: boolean, specify when a board does not provide proper
-		       otg pins.
-- dr_mode: string, indicates the working mode for the PHY. Can be "host",
-           "peripheral", or "otg". Should be set if otg controller is not used.
-
-
-Example (R-Car H3):
-
-	usb-phy@ee080200 {
-		compatible = "renesas,usb2-phy-r8a7795", "renesas,rcar-gen3-usb2-phy";
-		reg = <0 0xee080200 0 0x700>;
-		interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>;
-		clocks = <&cpg CPG_MOD 703>;
-	};
-
-	usb-phy@ee0a0200 {
-		compatible = "renesas,usb2-phy-r8a7795", "renesas,rcar-gen3-usb2-phy";
-		reg = <0 0xee0a0200 0 0x700>;
-		clocks = <&cpg CPG_MOD 702>;
-	};