dt-bindings: Whitespace clean-ups in schema files

Clean-up incorrect indentation, extra spaces, long lines, and missing
EOF newline in schema files. Most of the clean-ups are for list
indentation which should always be 2 spaces more than the preceding
keyword.

Found with yamllint (which I plan to integrate into the checks).

Cc: linux-arm-kernel@lists.infradead.org
Cc: linux-clk@vger.kernel.org
Cc: dri-devel@lists.freedesktop.org
Cc: linux-spi@vger.kernel.org
Cc: linux-gpio@vger.kernel.org
Cc: linux-remoteproc@vger.kernel.org
Cc: linux-hwmon@vger.kernel.org
Cc: linux-i2c@vger.kernel.org
Cc: linux-fbdev@vger.kernel.org
Cc: linux-iio@vger.kernel.org
Cc: linux-input@vger.kernel.org
Cc: linux-pm@vger.kernel.org
Cc: linux-media@vger.kernel.org
Cc: alsa-devel@alsa-project.org
Cc: linux-mmc@vger.kernel.org
Cc: linux-mtd@lists.infradead.org
Cc: netdev@vger.kernel.org
Cc: linux-rtc@vger.kernel.org
Cc: linux-serial@vger.kernel.org
Cc: linux-usb@vger.kernel.org
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Rob Herring <robh@kernel.org>

6 files changed, 84 insertions, 84 deletions

diff --git a/Documentation/devicetree/bindings/net/dsa/dsa.yaml b/Documentation/devicetree/bindings/net/dsa/dsa.yaml
index faea214339ca..6a1ec50ad4fd 100644
--- a/Documentation/devicetree/bindings/net/dsa/dsa.yaml
+++ b/Documentation/devicetree/bindings/net/dsa/dsa.yaml
@@ -85,8 +85,8 @@ patternProperties:
 
 oneOf:
   - required:
-    - ports
+      - ports
   - required:
-    - ethernet-ports
+      - ethernet-ports
 
 ...
diff --git a/Documentation/devicetree/bindings/net/qcom,ipa.yaml b/Documentation/devicetree/bindings/net/qcom,ipa.yaml
index a3561276e609..8594f114f016 100644
--- a/Documentation/devicetree/bindings/net/qcom,ipa.yaml
+++ b/Documentation/devicetree/bindings/net/qcom,ipa.yaml
@@ -43,7 +43,7 @@ description:
 
 properties:
   compatible:
-      const: "qcom,sdm845-ipa"
+    const: "qcom,sdm845-ipa"
 
   reg:
     items:
@@ -64,7 +64,7 @@ properties:
     maxItems: 1
 
   clock-names:
-      const: core
+    const: core
 
   interrupts:
     items:
@@ -96,8 +96,8 @@ properties:
     $ref: /schemas/types.yaml#/definitions/phandle-array
     description: State bits used in by the AP to signal the modem.
     items:
-    - description: Whether the "ipa-clock-enabled" state bit is valid
-    - description: Whether the IPA clock is enabled (if valid)
+      - description: Whether the "ipa-clock-enabled" state bit is valid
+      - description: Whether the IPA clock is enabled (if valid)
 
   qcom,smem-state-names:
     $ref: /schemas/types.yaml#/definitions/string-array
@@ -140,9 +140,9 @@ required:
 
 oneOf:
   - required:
-    - modem-init
+      - modem-init
   - required:
-    - memory-region
+      - memory-region
 
 examples:
   - |
diff --git a/Documentation/devicetree/bindings/net/socionext,uniphier-ave4.yaml b/Documentation/devicetree/bindings/net/socionext,uniphier-ave4.yaml
index 7d84a863b9b9..cbacc04fc9e6 100644
--- a/Documentation/devicetree/bindings/net/socionext,uniphier-ave4.yaml
+++ b/Documentation/devicetree/bindings/net/socionext,uniphier-ave4.yaml
@@ -46,10 +46,10 @@ properties:
   clock-names:
     oneOf:
       - items:          # for Pro4
-        - const: gio
-        - const: ether
-        - const: ether-gb
-        - const: ether-phy
+          - const: gio
+          - const: ether
+          - const: ether-gb
+          - const: ether-phy
       - const: ether    # for others
 
   resets:
@@ -59,8 +59,8 @@ properties:
   reset-names:
     oneOf:
       - items:          # for Pro4
-        - const: gio
-        - const: ether
+          - const: gio
+          - const: ether
       - const: ether    # for others
 
   socionext,syscon-phy-mode:
diff --git a/Documentation/devicetree/bindings/net/stm32-dwmac.yaml b/Documentation/devicetree/bindings/net/stm32-dwmac.yaml
index fafa34cebdb1..e5dff66df481 100644
--- a/Documentation/devicetree/bindings/net/stm32-dwmac.yaml
+++ b/Documentation/devicetree/bindings/net/stm32-dwmac.yaml
@@ -48,11 +48,11 @@ properties:
     minItems: 3
     maxItems: 5
     items:
-        - description: GMAC main clock
-        - description: MAC TX clock
-        - description: MAC RX clock
-        - description: For MPU family, used for power mode
-        - description: For MPU family, used for PHY without quartz
+      - description: GMAC main clock
+      - description: MAC TX clock
+      - description: MAC RX clock
+      - description: For MPU family, used for power mode
+      - description: For MPU family, used for PHY without quartz
 
   clock-names:
     minItems: 3
@@ -89,7 +89,7 @@ required:
   - st,syscon
 
 examples:
- - |
+  - |
     #include <dt-bindings/interrupt-controller/arm-gic.h>
     #include <dt-bindings/clock/stm32mp1-clks.h>
     #include <dt-bindings/reset/stm32mp1-resets.h>
diff --git a/Documentation/devicetree/bindings/net/ti,cpsw-switch.yaml b/Documentation/devicetree/bindings/net/ti,cpsw-switch.yaml
index 3ea0e1290dbb..dadeb8f811c0 100644
--- a/Documentation/devicetree/bindings/net/ti,cpsw-switch.yaml
+++ b/Documentation/devicetree/bindings/net/ti,cpsw-switch.yaml
@@ -35,7 +35,7 @@ properties:
   reg:
     maxItems: 1
     description:
-       The physical base address and size of full the CPSW module IO range
+      The physical base address and size of full the CPSW module IO range
 
   '#address-cells':
     const: 1
@@ -85,36 +85,36 @@ properties:
 
     patternProperties:
       "^port@[0-9]+$":
-          type: object
-          description: CPSW external ports
-
-          allOf:
-            - $ref: ethernet-controller.yaml#
-
-          properties:
-            reg:
-              items:
-                - enum: [1, 2]
-              description: CPSW port number
-
-            phys:
-              maxItems: 1
-              description:  phandle on phy-gmii-sel PHY
-
-            label:
-              description: label associated with this port
-
-            ti,dual-emac-pvid:
-              $ref: /schemas/types.yaml#/definitions/uint32
-              minimum: 1
-              maximum: 1024
-              description:
-                Specifies default PORT VID to be used to segregate
-                ports. Default value - CPSW port number.
-
-          required:
-            - reg
-            - phys
+        type: object
+        description: CPSW external ports
+
+        allOf:
+          - $ref: ethernet-controller.yaml#
+
+        properties:
+          reg:
+            items:
+              - enum: [1, 2]
+            description: CPSW port number
+
+          phys:
+            maxItems: 1
+            description: phandle on phy-gmii-sel PHY
+
+          label:
+            description: label associated with this port
+
+          ti,dual-emac-pvid:
+            $ref: /schemas/types.yaml#/definitions/uint32
+            minimum: 1
+            maximum: 1024
+            description:
+              Specifies default PORT VID to be used to segregate
+              ports. Default value - CPSW port number.
+
+        required:
+          - reg
+          - phys
 
   cpts:
     type: object
diff --git a/Documentation/devicetree/bindings/net/ti,k3-am654-cpsw-nuss.yaml b/Documentation/devicetree/bindings/net/ti,k3-am654-cpsw-nuss.yaml
index 174579370a22..227270cbf892 100644
--- a/Documentation/devicetree/bindings/net/ti,k3-am654-cpsw-nuss.yaml
+++ b/Documentation/devicetree/bindings/net/ti,k3-am654-cpsw-nuss.yaml
@@ -55,7 +55,7 @@ properties:
   reg:
     maxItems: 1
     description:
-       The physical base address and size of full the CPSW2G NUSS IO range
+      The physical base address and size of full the CPSW2G NUSS IO range
 
   reg-names:
     items:
@@ -100,38 +100,38 @@ properties:
 
     patternProperties:
       port@1:
-       type: object
-       description: CPSW2G NUSS external ports
-
-       $ref: ethernet-controller.yaml#
-
-       properties:
-         reg:
-           items:
-             - const: 1
-           description: CPSW port number
-
-         phys:
-           maxItems: 1
-           description:  phandle on phy-gmii-sel PHY
-
-         label:
-           description: label associated with this port
-
-         ti,mac-only:
-           $ref: /schemas/types.yaml#definitions/flag
-           description:
-             Specifies the port works in mac-only mode.
-
-         ti,syscon-efuse:
-           $ref: /schemas/types.yaml#definitions/phandle-array
-           description:
-             Phandle to the system control device node which provides access
-             to efuse IO range with MAC addresses
-
-       required:
-         - reg
-         - phys
+        type: object
+        description: CPSW2G NUSS external ports
+
+        $ref: ethernet-controller.yaml#
+
+        properties:
+          reg:
+            items:
+              - const: 1
+            description: CPSW port number
+
+          phys:
+            maxItems: 1
+            description: phandle on phy-gmii-sel PHY
+
+          label:
+            description: label associated with this port
+
+          ti,mac-only:
+            $ref: /schemas/types.yaml#definitions/flag
+            description:
+              Specifies the port works in mac-only mode.
+
+          ti,syscon-efuse:
+            $ref: /schemas/types.yaml#definitions/phandle-array
+            description:
+              Phandle to the system control device node which provides access
+              to efuse IO range with MAC addresses
+
+        required:
+          - reg
+          - phys
 
     additionalProperties: false