Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next

Pull networking updates from David Miller:
 "Highlights:

   1) Support AES128-CCM ciphers in kTLS, from Vakul Garg.

   2) Add fib_sync_mem to control the amount of dirty memory we allow to
      queue up between synchronize RCU calls, from David Ahern.

   3) Make flow classifier more lockless, from Vlad Buslov.

   4) Add PHY downshift support to aquantia driver, from Heiner
      Kallweit.

   5) Add SKB cache for TCP rx and tx, from Eric Dumazet. This reduces
      contention on SLAB spinlocks in heavy RPC workloads.

   6) Partial GSO offload support in XFRM, from Boris Pismenny.

   7) Add fast link down support to ethtool, from Heiner Kallweit.

   8) Use siphash for IP ID generator, from Eric Dumazet.

   9) Pull nexthops even further out from ipv4/ipv6 routes and FIB
      entries, from David Ahern.

  10) Move skb->xmit_more into a per-cpu variable, from Florian
      Westphal.

  11) Improve eBPF verifier speed and increase maximum program size,
      from Alexei Starovoitov.

  12) Eliminate per-bucket spinlocks in rhashtable, and instead use bit
      spinlocks. From Neil Brown.

  13) Allow tunneling with GUE encap in ipvs, from Jacky Hu.

  14) Improve link partner cap detection in generic PHY code, from
      Heiner Kallweit.

  15) Add layer 2 encap support to bpf_skb_adjust_room(), from Alan
      Maguire.

  16) Remove SKB list implementation assumptions in SCTP, your's truly.

  17) Various cleanups, optimizations, and simplifications in r8169
      driver. From Heiner Kallweit.

  18) Add memory accounting on TX and RX path of SCTP, from Xin Long.

  19) Switch PHY drivers over to use dynamic featue detection, from
      Heiner Kallweit.

  20) Support flow steering without masking in dpaa2-eth, from Ioana
      Ciocoi.

  21) Implement ndo_get_devlink_port in netdevsim driver, from Jiri
      Pirko.

  22) Increase the strict parsing of current and future netlink
      attributes, also export such policies to userspace. From Johannes
      Berg.

  23) Allow DSA tag drivers to be modular, from Andrew Lunn.

  24) Remove legacy DSA probing support, also from Andrew Lunn.

  25) Allow ll_temac driver to be used on non-x86 platforms, from Esben
      Haabendal.

  26) Add a generic tracepoint for TX queue timeouts to ease debugging,
      from Cong Wang.

  27) More indirect call optimizations, from Paolo Abeni"

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (1763 commits)
  cxgb4: Fix error path in cxgb4_init_module
  net: phy: improve pause mode reporting in phy_print_status
  dt-bindings: net: Fix a typo in the phy-mode list for ethernet bindings
  net: macb: Change interrupt and napi enable order in open
  net: ll_temac: Improve error message on error IRQ
  net/sched: remove block pointer from common offload structure
  net: ethernet: support of_get_mac_address new ERR_PTR error
  net: usb: smsc: fix warning reported by kbuild test robot
  staging: octeon-ethernet: Fix of_get_mac_address ERR_PTR check
  net: dsa: support of_get_mac_address new ERR_PTR error
  net: dsa: sja1105: Fix status initialization in sja1105_get_ethtool_stats
  vrf: sit mtu should not be updated when vrf netdev is the link
  net: dsa: Fix error cleanup path in dsa_init_module
  l2tp: Fix possible NULL pointer dereference
  taprio: add null check on sched_nest to avoid potential null pointer dereference
  net: mvpp2: cls: fix less than zero check on a u32 variable
  net_sched: sch_fq: handle non connected flows
  net_sched: sch_fq: do not assume EDT packets are ordered
  net: hns3: use devm_kcalloc when allocating desc_cb
  net: hns3: some cleanup for struct hns3_enet_ring
  ...

1 files changed, 156 insertions, 0 deletions

diff --git a/Documentation/devicetree/bindings/net/dsa/sja1105.txt b/Documentation/devicetree/bindings/net/dsa/sja1105.txt
new file mode 100644
index 000000000000..13fd21074d48
--- /dev/null
+++ b/Documentation/devicetree/bindings/net/dsa/sja1105.txt
@@ -0,0 +1,156 @@
+NXP SJA1105 switch driver
+=========================
+
+Required properties:
+
+- compatible:
+	Must be one of:
+	- "nxp,sja1105e"
+	- "nxp,sja1105t"
+	- "nxp,sja1105p"
+	- "nxp,sja1105q"
+	- "nxp,sja1105r"
+	- "nxp,sja1105s"
+
+	Although the device ID could be detected at runtime, explicit bindings
+	are required in order to be able to statically check their validity.
+	For example, SGMII can only be specified on port 4 of R and S devices,
+	and the non-SGMII devices, while pin-compatible, are not equal in terms
+	of support for RGMII internal delays (supported on P/Q/R/S, but not on
+	E/T).
+
+Optional properties:
+
+- sja1105,role-mac:
+- sja1105,role-phy:
+	Boolean properties that can be assigned under each port node. By
+	default (unless otherwise specified) a port is configured as MAC if it
+	is driving a PHY (phy-handle is present) or as PHY if it is PHY-less
+	(fixed-link specified, presumably because it is connected to a MAC).
+	The effect of this property (in either its implicit or explicit form)
+	is:
+	- In the case of MII or RMII it specifies whether the SJA1105 port is a
+	  clock source or sink for this interface (not applicable for RGMII
+	  where there is a Tx and an Rx clock).
+	- In the case of RGMII it affects the behavior regarding internal
+	  delays:
+	  1. If sja1105,role-mac is specified, and the phy-mode property is one
+	     of "rgmii-id", "rgmii-txid" or "rgmii-rxid", then the entity
+	     designated to apply the delay/clock skew necessary for RGMII
+	     is the PHY. The SJA1105 MAC does not apply any internal delays.
+	  2. If sja1105,role-phy is specified, and the phy-mode property is one
+	     of the above, the designated entity to apply the internal delays
+	     is the SJA1105 MAC (if hardware-supported). This is only supported
+	     by the second-generation (P/Q/R/S) hardware. On a first-generation
+	     E or T device, it is an error to specify an RGMII phy-mode other
+	     than "rgmii" for a port that is in fixed-link mode. In that case,
+	     the clock skew must either be added by the MAC at the other end of
+	     the fixed-link, or by PCB serpentine traces on the board.
+	These properties are required, for example, in the case where SJA1105
+	ports are at both ends of a MII/RMII PHY-less setup. One end would need
+	to have sja1105,role-mac, while the other sja1105,role-phy.
+
+See Documentation/devicetree/bindings/net/dsa/dsa.txt for the list of standard
+DSA required and optional properties.
+
+Other observations
+------------------
+
+The SJA1105 SPI interface requires a CS-to-CLK time (t2 in UM10944) of at least
+one half of t_CLK. At an SPI frequency of 1MHz, this means a minimum
+cs_sck_delay of 500ns. Ensuring that this SPI timing requirement is observed
+depends on the SPI bus master driver.
+
+Example
+-------
+
+Ethernet switch connected via SPI to the host, CPU port wired to enet2:
+
+arch/arm/boot/dts/ls1021a-tsn.dts:
+
+/* SPI controller of the LS1021 */
+&dspi0 {
+	sja1105@1 {
+		reg = <0x1>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		compatible = "nxp,sja1105t";
+		spi-max-frequency = <4000000>;
+		fsl,spi-cs-sck-delay = <1000>;
+		fsl,spi-sck-cs-delay = <1000>;
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			port@0 {
+				/* ETH5 written on chassis */
+				label = "swp5";
+				phy-handle = <&rgmii_phy6>;
+				phy-mode = "rgmii-id";
+				reg = <0>;
+				/* Implicit "sja1105,role-mac;" */
+			};
+			port@1 {
+				/* ETH2 written on chassis */
+				label = "swp2";
+				phy-handle = <&rgmii_phy3>;
+				phy-mode = "rgmii-id";
+				reg = <1>;
+				/* Implicit "sja1105,role-mac;" */
+			};
+			port@2 {
+				/* ETH3 written on chassis */
+				label = "swp3";
+				phy-handle = <&rgmii_phy4>;
+				phy-mode = "rgmii-id";
+				reg = <2>;
+				/* Implicit "sja1105,role-mac;" */
+			};
+			port@3 {
+				/* ETH4 written on chassis */
+				phy-handle = <&rgmii_phy5>;
+				label = "swp4";
+				phy-mode = "rgmii-id";
+				reg = <3>;
+				/* Implicit "sja1105,role-mac;" */
+			};
+			port@4 {
+				/* Internal port connected to eth2 */
+				ethernet = <&enet2>;
+				phy-mode = "rgmii";
+				reg = <4>;
+				/* Implicit "sja1105,role-phy;" */
+				fixed-link {
+					speed = <1000>;
+					full-duplex;
+				};
+			};
+		};
+	};
+};
+
+/* MDIO controller of the LS1021 */
+&mdio0 {
+	/* BCM5464 */
+	rgmii_phy3: ethernet-phy@3 {
+		reg = <0x3>;
+	};
+	rgmii_phy4: ethernet-phy@4 {
+		reg = <0x4>;
+	};
+	rgmii_phy5: ethernet-phy@5 {
+		reg = <0x5>;
+	};
+	rgmii_phy6: ethernet-phy@6 {
+		reg = <0x6>;
+	};
+};
+
+/* Ethernet master port of the LS1021 */
+&enet2 {
+	phy-connection-type = "rgmii";
+	status = "ok";
+	fixed-link {
+		speed = <1000>;
+		full-duplex;
+	};
+};