Merge tag 'mmc-merge-for-3.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/cjb/mmc

Pull MMC updates from Chris Ball:
 "Core:
   - Add DT properties for card detection (broken-cd, cd-gpios,
     non-removable)
   - Don't poll non-removable devices
   - Fixup/rework eMMC sleep mode/"power off notify" feature
   - Support eMMC background operations (BKOPS).  To set the one-time
     programmable fuse that enables bkops on an eMMC that doesn't
     already have it set, you can use the "mmc bkops enable" command in:

       git://git.kernel.org/pub/scm/linux/kernel/git/cjb/mmc-utils.git

  Drivers:
   - atmel-mci, dw_mmc, pxa-mci, dove, s3c, spear: Add device tree
     support
   - bfin_sdh: Add support for the controller in bf60x
   - dw_mmc: Support Samsung Exynos SoCs
   - eSDHC: Add ADMA support
   - sdhci: Support testing a cd-gpio (from slot-gpio) instead of
     presence bit
   - sdhci-pltfm: Support broken-cd DT property
   - tegra: Convert to only supporting DT (mach-tegra has gone DT-only)"

* tag 'mmc-merge-for-3.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/cjb/mmc: (67 commits)
  mmc: core: Fixup broken suspend and eMMC4.5 power off notify
  mmc: sdhci-spear: Add clk_{un}prepare() support
  mmc: sdhci-spear: add device tree bindings
  mmc: sdhci-s3c: Add clk_(enable/disable) in runtime suspend/resume
  mmc: core: Replace MMC_CAP2_BROKEN_VOLTAGE with test for fixed regulator
  mmc: sdhci-pxav3: Use sdhci_get_of_property for parsing DT quirks
  mmc: dt: Support "broken-cd" property in sdhci-pltfm
  mmc: sdhci-s3c: fix the wrong number of max bus clocks
  mmc: sh-mmcif: avoid oops on spurious interrupts
  mmc: sh-mmcif: properly handle MMC_WRITE_MULTIPLE_BLOCK completion IRQ
  mmc: sdhci-s3c: Fix crash on module insertion for second time
  mmc: sdhci-s3c: Enable only required bus clock
  mmc: Revert "mmc: dw_mmc: Add check for IDMAC configuration"
  mmc: mxcmmc: fix bug that may block a data transfer forever
  mmc: omap_hsmmc: Pass on the suspend failure to the PM core
  mmc: atmel-mci: AP700x PDC is not connected to MCI
  mmc: atmel-mci: DMA can be used with other controllers
  mmc: mmci: use clk_prepare_enable and clk_disable_unprepare
  mmc: sdhci-s3c: Add device tree support
  mmc: dw_mmc: add support for exynos specific implementation of dw-mshc
  ...

1 files changed, 79 insertions, 0 deletions

diff --git a/Documentation/devicetree/bindings/mmc/synposis-dw-mshc.txt b/Documentation/devicetree/bindings/mmc/synposis-dw-mshc.txt
new file mode 100644
index 000000000000..06cd32d08052
--- /dev/null
+++ b/Documentation/devicetree/bindings/mmc/synposis-dw-mshc.txt
@@ -0,0 +1,79 @@
+* Synopsis Designware Mobile Storage Host Controller
+
+The Synopsis designware mobile storage host controller is used to interface
+a SoC with storage medium such as eMMC or SD/MMC cards. This file documents
+differences between the core mmc properties described by mmc.txt and the
+properties used by the Synopsis Designware Mobile Storage Host Controller.
+
+Required Properties:
+
+* compatible: should be
+	- snps,dw-mshc: for controllers compliant with synopsis dw-mshc.
+* #address-cells: should be 1.
+* #size-cells: should be 0.
+
+# Slots: The slot specific information are contained within child-nodes with
+  each child-node representing a supported slot. There should be atleast one
+  child node representing a card slot. The name of the child node representing
+  the slot is recommended to be slot@n where n is the unique number of the slot
+  connnected to the controller. The following are optional properties which
+  can be included in the slot child node.
+
+	* reg: specifies the physical slot number. The valid values of this
+	  property is 0 to (num-slots -1), where num-slots is the value
+	  specified by the num-slots property.
+
+	* bus-width: as documented in mmc core bindings.
+
+	* wp-gpios: specifies the write protect gpio line. The format of the
+	  gpio specifier depends on the gpio controller. If the write-protect
+	  line is not available, this property is optional.
+
+Optional properties:
+
+* num-slots: specifies the number of slots supported by the controller.
+  The number of physical slots actually used could be equal or less than the
+  value specified by num-slots. If this property is not specified, the value
+  of num-slot property is assumed to be 1.
+
+* fifo-depth: The maximum size of the tx/rx fifo's. If this property is not
+  specified, the default value of the fifo size is determined from the
+  controller registers.
+
+* card-detect-delay: Delay in milli-seconds before detecting card after card
+  insert event. The default value is 0.
+
+* supports-highspeed: Enables support for high speed cards (upto 50MHz)
+
+* broken-cd: as documented in mmc core bindings.
+
+Aliases:
+
+- All the MSHC controller nodes should be represented in the aliases node using
+  the following format 'mshc{n}' where n is a unique number for the alias.
+
+Example:
+
+The MSHC controller node can be split into two portions, SoC specific and
+board specific portions as listed below.
+
+	dwmmc0@12200000 {
+		compatible = "snps,dw-mshc";
+		reg = <0x12200000 0x1000>;
+		interrupts = <0 75 0>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+	};
+
+	dwmmc0@12200000 {
+		num-slots = <1>;
+		supports-highspeed;
+		broken-cd;
+		fifo-depth = <0x80>;
+		card-detect-delay = <200>;
+
+		slot@0 {
+			reg = <0>;
+			bus-width = <8>;
+		};
+	};