diff options
| author | Andy Shevchenko <andriy.shevchenko@linux.intel.com> | 2021-04-19 14:24:56 +0300 |
|---|---|---|
| committer | Ulf Hansson <ulf.hansson@linaro.org> | 2021-04-23 10:29:49 +0300 |
| commit | 6c857ccf4eedfdf8b8cabdd36e3675469f59d31b (patch) | |
| tree | 2572813f69e78b0b7e0650dfbbe33815e642c895 /Documentation/devicetree/bindings/mmc/mmc-spi-slot.txt | |
| parent | 6dab809bb5b183015e19d558bfa95107de660be0 (diff) | |
| download | linux-6c857ccf4eedfdf8b8cabdd36e3675469f59d31b.tar.xz | |
mmc: mmc_spi: Set up polling even if voltage-ranges is not present
When voltage-ranges property is not present the driver assumes that
it is 3.3v (3.2v..3.4v). But at the same time it disallows polling.
Fix that by dropping the comparison to 0 when no property is provided.
While at it, mark voltage-ranges property optional as it was initially.
Fixes: 9c43df57910b ("mmc_spi: Add support for OpenFirmware bindings")
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20210419112459.25241-3-andriy.shevchenko@linux.intel.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Diffstat (limited to 'Documentation/devicetree/bindings/mmc/mmc-spi-slot.txt')
| -rw-r--r-- | Documentation/devicetree/bindings/mmc/mmc-spi-slot.txt | 6 |
1 files changed, 3 insertions, 3 deletions
diff --git a/Documentation/devicetree/bindings/mmc/mmc-spi-slot.txt b/Documentation/devicetree/bindings/mmc/mmc-spi-slot.txt index 75486cca8054..5e74db69f581 100644 --- a/Documentation/devicetree/bindings/mmc/mmc-spi-slot.txt +++ b/Documentation/devicetree/bindings/mmc/mmc-spi-slot.txt @@ -5,11 +5,11 @@ by mmc.txt and the properties used by the mmc_spi driver. Required properties: - spi-max-frequency : maximum frequency for this device (Hz). -- voltage-ranges : two cells are required, first cell specifies minimum - slot voltage (mV), second cell specifies maximum slot voltage (mV). - Several ranges could be specified. Optional properties: +- voltage-ranges : two cells are required, first cell specifies minimum + slot voltage (mV), second cell specifies maximum slot voltage (mV). + Several ranges could be specified. If not provided, 3.2v..3.4v is assumed. - gpios : may specify GPIOs in this order: Card-Detect GPIO, Write-Protect GPIO. Note that this does not follow the binding from mmc.txt, for historical reasons. |