Merge tag 'doc-4.11-images' of git://git.lwn.net/linux into drm-misc-next

Pointer for Markus's image conversion work.

We need this so we can merge all the pretty drm graphs for 4.12.

Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>

9 files changed, 250 insertions, 6 deletions

diff --git a/Documentation/devicetree/bindings/mfd/as3722.txt b/Documentation/devicetree/bindings/mfd/as3722.txt
index 4f64b2a73169..0b2a6099aa20 100644
--- a/Documentation/devicetree/bindings/mfd/as3722.txt
+++ b/Documentation/devicetree/bindings/mfd/as3722.txt
@@ -122,8 +122,7 @@ Following are properties of regulator subnode.
 
 Power-off:
 =========
-AS3722 supports the system power off by turning off all its rail. This
-is provided through pm_power_off.
+AS3722 supports the system power off by turning off all its rails.
 The device node should have the following properties to enable this
 functionality
 ams,system-power-controller: Boolean, to enable the power off functionality
diff --git a/Documentation/devicetree/bindings/mfd/aspeed-gfx.txt b/Documentation/devicetree/bindings/mfd/aspeed-gfx.txt
new file mode 100644
index 000000000000..aea5370efd97
--- /dev/null
+++ b/Documentation/devicetree/bindings/mfd/aspeed-gfx.txt
@@ -0,0 +1,17 @@
+* Device tree bindings for Aspeed SoC Display Controller (GFX)
+
+The Aspeed SoC Display Controller primarily does as its name suggests, but also
+participates in pinmux requests on the g5 SoCs. It is therefore considered a
+syscon device.
+
+Required properties:
+- compatible:		"aspeed,ast2500-gfx", "syscon"
+- reg:			contains offset/length value of the GFX memory
+			region.
+
+Example:
+
+gfx: display@1e6e6000 {
+	compatible = "aspeed,ast2500-gfx", "syscon";
+	reg = <0x1e6e6000 0x1000>;
+};
diff --git a/Documentation/devicetree/bindings/mfd/aspeed-lpc.txt b/Documentation/devicetree/bindings/mfd/aspeed-lpc.txt
new file mode 100644
index 000000000000..514d82ced95b
--- /dev/null
+++ b/Documentation/devicetree/bindings/mfd/aspeed-lpc.txt
@@ -0,0 +1,137 @@
+======================================================================
+Device tree bindings for the Aspeed Low Pin Count (LPC) Bus Controller
+======================================================================
+
+The LPC bus is a means to bridge a host CPU to a number of low-bandwidth
+peripheral devices, replacing the use of the ISA bus in the age of PCI[0]. The
+primary use case of the Aspeed LPC controller is as a slave on the bus
+(typically in a Baseboard Management Controller SoC), but under certain
+conditions it can also take the role of bus master.
+
+The LPC controller is represented as a multi-function device to account for the
+mix of functionality it provides. The principle split is between the register
+layout at the start of the I/O space which is, to quote the Aspeed datasheet,
+"basically compatible with the [LPC registers from the] popular BMC controller
+H8S/2168[1]", and everything else, where everything else is an eclectic
+collection of functions with a esoteric register layout. "Everything else",
+here labeled the "host" portion of the controller, includes, but is not limited
+to:
+
+* An IPMI Block Transfer[2] Controller
+
+* An LPC Host Controller: Manages LPC functions such as host vs slave mode, the
+  physical properties of some LPC pins, configuration of serial IRQs, and
+  APB-to-LPC bridging amonst other functions.
+
+* An LPC Host Interface Controller: Manages functions exposed to the host such
+  as LPC firmware hub cycles, configuration of the LPC-to-AHB mapping, UART
+  management and bus snoop configuration.
+
+* A set of SuperIO[3] scratch registers: Enables implementation of e.g. custom
+  hardware management protocols for handover between the host and baseboard
+  management controller.
+
+Additionally the state of the LPC controller influences the pinmux
+configuration, therefore the host portion of the controller is exposed as a
+syscon as a means to arbitrate access.
+
+[0] http://www.intel.com/design/chipsets/industry/25128901.pdf
+[1] https://www.renesas.com/en-sg/doc/products/mpumcu/001/rej09b0078_h8s2168.pdf?key=7c88837454702128622bee53acbda8f4
+[2] http://www.intel.com/content/dam/www/public/us/en/documents/product-briefs/ipmi-second-gen-interface-spec-v2-rev1-1.pdf
+[3] https://en.wikipedia.org/wiki/Super_I/O
+
+Required properties
+===================
+
+- compatible:	One of:
+		"aspeed,ast2400-lpc", "simple-mfd"
+		"aspeed,ast2500-lpc", "simple-mfd"
+
+- reg:		contains the physical address and length values of the Aspeed
+                LPC memory region.
+
+- #address-cells: <1>
+- #size-cells:	<1>
+- ranges: 	Maps 0 to the physical address and length of the LPC memory
+                region
+
+Required LPC Child nodes
+========================
+
+BMC Node
+--------
+
+- compatible:	One of:
+		"aspeed,ast2400-lpc-bmc"
+		"aspeed,ast2500-lpc-bmc"
+
+- reg:		contains the physical address and length values of the
+                H8S/2168-compatible LPC controller memory region
+
+Host Node
+---------
+
+- compatible:   One of:
+		"aspeed,ast2400-lpc-host", "simple-mfd", "syscon"
+		"aspeed,ast2500-lpc-host", "simple-mfd", "syscon"
+
+- reg:		contains the address and length values of the host-related
+                register space for the Aspeed LPC controller
+
+- #address-cells: <1>
+- #size-cells:	<1>
+- ranges: 	Maps 0 to the address and length of the host-related LPC memory
+                region
+
+Example:
+
+lpc: lpc@1e789000 {
+	compatible = "aspeed,ast2500-lpc", "simple-mfd";
+	reg = <0x1e789000 0x1000>;
+
+	#address-cells = <1>;
+	#size-cells = <1>;
+	ranges = <0x0 0x1e789000 0x1000>;
+
+	lpc_bmc: lpc-bmc@0 {
+		compatible = "aspeed,ast2500-lpc-bmc";
+		reg = <0x0 0x80>;
+	};
+
+	lpc_host: lpc-host@80 {
+		compatible = "aspeed,ast2500-lpc-host", "simple-mfd", "syscon";
+		reg = <0x80 0x1e0>;
+		reg-io-width = <4>;
+
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0x0 0x80 0x1e0>;
+	};
+};
+
+Host Node Children
+==================
+
+LPC Host Controller
+-------------------
+
+The Aspeed LPC Host Controller configures the Low Pin Count (LPC) bus behaviour
+between the host and the baseboard management controller. The registers exist
+in the "host" portion of the Aspeed LPC controller, which must be the parent of
+the LPC host controller node.
+
+Required properties:
+
+- compatible:	One of:
+		"aspeed,ast2400-lhc";
+		"aspeed,ast2500-lhc";
+
+- reg:		contains offset/length values of the LHC memory regions. In the
+		AST2400 and AST2500 there are two regions.
+
+Example:
+
+lhc: lhc@20 {
+	compatible = "aspeed,ast2500-lhc";
+	reg = <0x20 0x24 0x48 0x8>;
+};
diff --git a/Documentation/devicetree/bindings/mfd/mfd.txt b/Documentation/devicetree/bindings/mfd/mfd.txt
index af9d6931a1a2..bcb6abb9d413 100644
--- a/Documentation/devicetree/bindings/mfd/mfd.txt
+++ b/Documentation/devicetree/bindings/mfd/mfd.txt
@@ -19,12 +19,22 @@ Optional properties:
 
 - compatible : "simple-mfd" - this signifies that the operating system should
   consider all subnodes of the MFD device as separate devices akin to how
-  "simple-bus" inidicates when to see subnodes as children for a simple
+  "simple-bus" indicates when to see subnodes as children for a simple
   memory-mapped bus. For more complex devices, when the nexus driver has to
   probe registers to figure out what child devices exist etc, this should not
   be used. In the latter case the child devices will be determined by the
   operating system.
 
+- ranges: Describes the address mapping relationship to the parent. Should set
+  the child's base address to 0, the physical address within parent's address
+  space, and the length of the address map.
+
+- #address-cells: Specifies the number of cells used to represent physical base
+  addresses. Must be present if ranges is used.
+
+- #size-cells: Specifies the number of cells used to represent the size of an
+  address. Must be present if ranges is used.
+
 Example:
 
 foo@1000 {
diff --git a/Documentation/devicetree/bindings/mfd/motorola-cpcap.txt b/Documentation/devicetree/bindings/mfd/motorola-cpcap.txt
new file mode 100644
index 000000000000..15bc885f9df4
--- /dev/null
+++ b/Documentation/devicetree/bindings/mfd/motorola-cpcap.txt
@@ -0,0 +1,31 @@
+Motorola CPCAP PMIC device tree binding
+
+Required properties:
+- compatible		: One or both of "motorola,cpcap" or "ste,6556002"
+- reg			: SPI chip select
+- interrupt-parent	: The parent interrupt controller
+- interrupts		: The interrupt line the device is connected to
+- interrupt-controller	: Marks the device node as an interrupt controller
+- #interrupt-cells	: The number of cells to describe an IRQ, should be 2
+- #address-cells	: Child device offset number of cells, should be 1
+- #size-cells		: Child device size number of cells, should be 0
+- spi-max-frequency	: Typically set to 3000000
+- spi-cs-high		: SPI chip select direction
+
+Example:
+
+&mcspi1 {
+	cpcap: pmic@0 {
+		compatible = "motorola,cpcap", "ste,6556002";
+		reg = <0>;	/* cs0 */
+		interrupt-parent = <&gpio1>;
+		interrupts = <7 IRQ_TYPE_EDGE_RISING>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		spi-max-frequency = <3000000>;
+		spi-cs-high;
+	};
+};
+
diff --git a/Documentation/devicetree/bindings/mfd/mt6397.txt b/Documentation/devicetree/bindings/mfd/mt6397.txt
index 949c85f8d02c..c568d52af5af 100644
--- a/Documentation/devicetree/bindings/mfd/mt6397.txt
+++ b/Documentation/devicetree/bindings/mfd/mt6397.txt
@@ -34,6 +34,10 @@ Optional subnodes:
 - clk
 	Required properties:
 		- compatible: "mediatek,mt6397-clk"
+- led
+	Required properties:
+		- compatible: "mediatek,mt6323-led"
+	see Documentation/devicetree/bindings/leds/leds-mt6323.txt
 
 Example:
 	pwrap: pwrap@1000f000 {
diff --git a/Documentation/devicetree/bindings/mfd/omap-usb-host.txt b/Documentation/devicetree/bindings/mfd/omap-usb-host.txt
index 4721b2d521e4..aa1eaa59581b 100644
--- a/Documentation/devicetree/bindings/mfd/omap-usb-host.txt
+++ b/Documentation/devicetree/bindings/mfd/omap-usb-host.txt
@@ -64,8 +64,8 @@ Required properties if child node exists:
 Properties for children:
 
 The OMAP HS USB Host subsystem contains EHCI and OHCI controllers.
-See Documentation/devicetree/bindings/usb/omap-ehci.txt and
-omap3-ohci.txt
+See Documentation/devicetree/bindings/usb/ehci-omap.txt and
+Documentation/devicetree/bindings/usb/ohci-omap3.txt.
 
 Example for OMAP4:
 
diff --git a/Documentation/devicetree/bindings/mfd/qcom-rpm.txt b/Documentation/devicetree/bindings/mfd/qcom-rpm.txt
index 485bc59fcc48..3c91ad430eea 100644
--- a/Documentation/devicetree/bindings/mfd/qcom-rpm.txt
+++ b/Documentation/devicetree/bindings/mfd/qcom-rpm.txt
@@ -234,7 +234,7 @@ see regulator.txt - with additional custom properties described below:
 - qcom,switch-mode-frequency:
 	Usage: required
 	Value type: <u32>
-	Definition: Frequency (Hz) of the swith mode power supply;
+	Definition: Frequency (Hz) of the switch mode power supply;
 		    must be one of:
 		    19200000, 9600000, 6400000, 4800000, 3840000, 3200000,
 		    2740000, 2400000, 2130000, 1920000, 1750000, 1600000,
diff --git a/Documentation/devicetree/bindings/mfd/stm32-timers.txt b/Documentation/devicetree/bindings/mfd/stm32-timers.txt
new file mode 100644
index 000000000000..bbd083f5600a
--- /dev/null
+++ b/Documentation/devicetree/bindings/mfd/stm32-timers.txt
@@ -0,0 +1,46 @@
+STM32 Timers driver bindings
+
+This IP provides 3 types of timer along with PWM functionality:
+- advanced-control timers consist of a 16-bit auto-reload counter driven by a programmable
+  prescaler, break input feature, PWM outputs and complementary PWM ouputs channels.
+- general-purpose timers consist of a 16-bit or 32-bit auto-reload counter driven by a
+  programmable prescaler and PWM outputs.
+- basic timers consist of a 16-bit auto-reload counter driven by a programmable prescaler.
+
+Required parameters:
+- compatible: must be "st,stm32-timers"
+
+- reg:			Physical base address and length of the controller's
+			registers.
+- clock-names:		Set to "int".
+- clocks: 		Phandle to the clock used by the timer module.
+			For Clk properties, please refer to ../clock/clock-bindings.txt
+
+Optional parameters:
+- resets:		Phandle to the parent reset controller.
+			See ../reset/st,stm32-rcc.txt
+
+Optional subnodes:
+- pwm:			See ../pwm/pwm-stm32.txt
+- timer:		See ../iio/timer/stm32-timer-trigger.txt
+
+Example:
+	timers@40010000 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		compatible = "st,stm32-timers";
+		reg = <0x40010000 0x400>;
+		clocks = <&rcc 0 160>;
+		clock-names = "clk_int";
+
+		pwm {
+			compatible = "st,stm32-pwm";
+			pinctrl-0	= <&pwm1_pins>;
+			pinctrl-names	= "default";
+		};
+
+		timer@0 {
+			compatible = "st,stm32-timer-trigger";
+			reg = <0>;
+		};
+	};