Merge tag 'mfd-for-linus-3.15' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd

Pull MFD updates from Lee Jones:
 "Changes to existing drivers:
   - Use of managed resources - omap, twl4030, ti_am335x_tscadc
   - Advanced error handling - omap
   - Rework clk management - omap
   - Device Tree (re-)work - tc3589x, pm8921, da9055, sec
   - IRC management overhaul and !BROKEN - pm8921
   - Convert to regmap - ssbi, pm8921
   - Use simple power-management ops - ucb1x00
   - Include file clean-up - adp5520, cs5535, janz, lpc_ich,
      - lpc_sch, max14577, mcp-sa11x0, pcf50633-adc, rc5t583,
      	rdc321x-southbridge, retu, smsc-ece1099, ti-ssp, ti_am335x_tscadc,
	tps65912, vexpress-config, wm8350, ywm8350
   - Various bug fixes across the subsystem
      - NULL/invalid pointer dereference prevention
      - Resource leak mitigation,
      - Variable used initialised
      - Staticise various containers
      - Enforce return value checks

  New drivers/supported devices:
   - Add support for s2mps14 and s2mpa01 to sec
   - Add support for da9063 (v5) to da9063
   - Add support for atom-c2000 to gpio-ich
   - Add support for come-{mbt10,cbt6,chl6} to kempld
   - Add support for da9053 to da9052
   - Add support for itco-wdt (v3) and baytrail to lpc_ich
   - Add new drivers for tps65218, rtsx_usb, bcm590xx

  (Re-)moved drivers:
   - twl4030 ==> drivers/iio
   - ti-ssp  ==> /dev/null"

* tag 'mfd-for-linus-3.15' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd: (103 commits)
  mfd: wm5110: Correct default for HEADPHONE_DETECT_1
  mfd: arizona: Correct small errors in the DT binding documentation
  mfd: arizona: Mark DSP clocking register as volatile
  mfd: devicetree: bindings: Add pm8xxx RTC description
  mfd: kempld-core: Fix potential hang-up during boot
  mfd: sec-core: Fix uninitialized 'regmap_rtc' on S2MPA01
  mfd: tps65910: Fix regmap_irq_chip_data leak on mfd_add_devices fail
  mfd: tps65910: Fix possible invalid pointer dereference on regmap_add_irq_chip fail
  mfd: sec-core: Fix I2C dummy device resource leak on probe failure
  mfd: sec-core: Add of_compatible strings for clock MFD cells
  mfd: Remove obsolete ti-ssp driver
  Documentation: mfd: s2mps11: Describe S5M8767 and S2MPS14 clocks
  mfd: bcm590xx: Fix type argument for module device table
  mfd: lpc_ich: Add support for Intel Bay Trail SoC
  mfd: lpc_ich: Add support for NM10 GPIO
  mfd: lpc_ich: Change Avoton to iTCO v3
  watchdog: iTCO_wdt: Add support for v3 silicon
  mfd: lpc_ich: Add support for iTCO v3
  mfd: lpc_ich: Remove lpc_ich_cfg struct use
  mfd: lpc_ich: Only configure watchdog or GPIO when present
  ...

1 files changed, 15 insertions, 9 deletions

diff --git a/Documentation/devicetree/bindings/mfd/s2mps11.txt b/Documentation/devicetree/bindings/mfd/s2mps11.txt
index f69bec294f02..802e839b0829 100644
--- a/Documentation/devicetree/bindings/mfd/s2mps11.txt
+++ b/Documentation/devicetree/bindings/mfd/s2mps11.txt
@@ -16,20 +16,25 @@ Optional properties:
 - interrupts: Interrupt specifiers for interrupt sources.
 
 Optional nodes:
-- clocks: s2mps11 provides three(AP/CP/BT) buffered 32.768 KHz outputs, so to
-  register these as clocks with common clock framework instantiate a sub-node
-  named "clocks". It uses the common clock binding documented in :
+- clocks: s2mps11 and s5m8767 provide three(AP/CP/BT) buffered 32.768 KHz
+  outputs, so to register these as clocks with common clock framework
+  instantiate a sub-node named "clocks". It uses the common clock binding
+  documented in :
   [Documentation/devicetree/bindings/clock/clock-bindings.txt]
+  The s2mps14 provides two (AP/BT) buffered 32.768 KHz outputs.
   - #clock-cells: should be 1.
 
   - The following is the list of clocks generated by the controller. Each clock
     is assigned an identifier and client nodes use this identifier to specify
     the clock which they consume.
-    Clock               ID
-    ----------------------
-    32KhzAP		0
-    32KhzCP		1
-    32KhzBT		2
+    Clock               ID           Devices
+    ----------------------------------------------------------
+    32KhzAP		0            S2MPS11, S2MPS14, S5M8767
+    32KhzCP		1            S2MPS11, S5M8767
+    32KhzBT		2            S2MPS11, S2MPS14, S5M8767
+
+  - compatible: Should be one of: "samsung,s2mps11-clk", "samsung,s2mps14-clk",
+		"samsung,s5m8767-clk"
 
 - regulators: The regulators of s2mps11 that have to be instantiated should be
 included in a sub-node named 'regulators'. Regulator nodes included in this
@@ -75,7 +80,8 @@ Example:
 		compatible = "samsung,s2mps11-pmic";
 		reg = <0x66>;
 
-		s2m_osc: clocks{
+		s2m_osc: clocks {
+			compatible = "samsung,s2mps11-clk";
 			#clock-cells = 1;
 			clock-output-names = "xx", "yy", "zz";
 		};