Merge tag 'armsoc-dt64' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

Pull ARM 64-bit DT updates from Arnd Bergmann:
 "Device-tree updates for arm64 platforms. For the first time I can
  remember, this is actually larger than the corresponding branch for
  32-bit platforms overall, though that has more individual changes.

  A significant portion this time is due to added machine support:

   - Initial support for the Realtek RTD1295 SoC, along with the Zidoo
     X9S set-top-box

   - Initial support for Actions Semi S900 and the Bubblegum-96
     single-board-cёmputer.

   - Rockchips support for the rk3399-Firefly single-board-computer gets
     added, this one stands out for being relatively fast, affordable
     and well₋supported, compared to many boards that only fall into one
     or two of the above categories.

   - Mediatek gains support for the mt6797 mobile-phone SoC platform and
     corresponding evaluation board.

   - Amlogic board support gets added for the NanoPi K2 and S905x
     LibreTech CC single-board computers and the R-Box Pro set-top-box

   - Allwinner board support gets added for the OrangePi Win, Orangepi
     Zero Plus 2, NanoPi NEO2 and Orange Pi Prime single board computers
     and the SoPine system-on-module.

   - Renesas board support for Salvator-XS and H3ULCB automotive
     development systems.

   - Socionext Uniphier board support for LD11-global and LD20-global,
     whatever those may be.

   - Broadcom adds support for the new Stingray communication processor
     in its iProc family, along with two reference boards.

  Other updates include:

   - For the hisicon platform, support for Hi3660-Hikey960 gets extended
     significantly.

   - Lots of smaller updates for Renesas, Amlogic, Rockchip, UniPhier,
     Broadcom, Allwinner, Hisilicon, Qualcomm, Marvell, and NXP"

* tag 'armsoc-dt64' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (243 commits)
  ARM64: dts: marvell: armada37xx: Fix timer interrupt specifiers
  Revert "arm64: dts: marvell: add dma-mask in crypto nodes for 7k/8k"
  arm64: dts: mediatek: don't include missing file
  ARM64: dts: meson-gxl: Add Libre Technology CC support
  dt-bindings: arm: amlogic: Add Libre Technology CC board
  dt-bindings: add Libre Technology vendor prefix
  arm64: dts: marvell: enable GICP and ICU on Armada 7K/8K
  arm64: dts: zte: Use - instead of @ for DT OPP entries
  arm64: dts: marvell: add gpio support for Armada 7K/8K
  arm64: dts: marvell: add pinctrl support for Armada 7K/8K
  arm64: dts: marvell: use new binding for the system controller on cp110
  arm64: dts: marvell: remove *-clock-output-names on cp110
  arm64: dts: marvell: use new bindings for xor clocks on ap806
  arm64: dts: marvell: mcbin: enable the mdio node
  arm64: dts: Add Actions Semi S900 and Bubblegum-96
  dt-bindings: Add vendor prefix for uCRobotics
  arm64: dts: marvell: add xmdio nodes for 7k/8k
  arm64: dts: marvell: add a comment on the cp110 slave node status
  arm64: dts: marvell: remove cpm crypto nodes from dts files
  arm64: dts: marvell: cp110: enable the crypto engine at the SoC level
  ...

1 files changed, 41 insertions, 0 deletions

diff --git a/Documentation/devicetree/bindings/i2c/i2c-mtk.txt b/Documentation/devicetree/bindings/i2c/i2c-mtk.txt
new file mode 100644
index 000000000000..bd5a7befd951
--- /dev/null
+++ b/Documentation/devicetree/bindings/i2c/i2c-mtk.txt
@@ -0,0 +1,41 @@
+* Mediatek's I2C controller
+
+The Mediatek's I2C controller is used to interface with I2C devices.
+
+Required properties:
+  - compatible: value should be either of the following.
+      "mediatek,mt2701-i2c", "mediatek,mt6577-i2c": for Mediatek mt2701
+      "mediatek,mt6577-i2c": for i2c compatible with mt6577.
+      "mediatek,mt6589-i2c": for i2c compatible with mt6589.
+      "mediatek,mt7623-i2c", "mediatek,mt6577-i2c": for i2c compatible with mt7623.
+      "mediatek,mt8173-i2c": for i2c compatible with mt8173.
+  - reg: physical base address of the controller and dma base, length of memory
+    mapped region.
+  - interrupts: interrupt number to the cpu.
+  - clock-div: the fixed value for frequency divider of clock source in i2c
+    module. Each IC may be different.
+  - clocks: clock name from clock manager
+  - clock-names: Must include "main" and "dma", if enable have-pmic need include
+    "pmic" extra.
+
+Optional properties:
+  - clock-frequency: Frequency in Hz of the bus when transfer, the default value
+    is 100000.
+  - mediatek,have-pmic: platform can control i2c form special pmic side.
+    Only mt6589 and mt8135 support this feature.
+  - mediatek,use-push-pull: IO config use push-pull mode.
+
+Example:
+
+	i2c0: i2c@1100d000 {
+			compatible = "mediatek,mt6577-i2c";
+			reg = <0x1100d000 0x70>,
+			      <0x11000300 0x80>;
+			interrupts = <GIC_SPI 44 IRQ_TYPE_LEVEL_LOW>;
+			clock-frequency = <400000>;
+			mediatek,have-pmic;
+			clock-div = <16>;
+			clocks = <&i2c0_ck>, <&ap_dma_ck>;
+			clock-names = "main", "dma";
+	};
+