Merge tag 'pinctrl-v4.13-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl

Pull pin control updates from Linus Walleij:
 "This is the big bulk of pin control changes for the v4.13 series:

  Core:
   - The documentation is moved over to RST.
   - We now have agreed bindings for enabling input and output buffers
     without actually enabling input and/or output on a pin. We are
     chiseling out some details of pin control electronics.

  New drivers:
   - ZTE ZX
   - Renesas RZA1
   - MIPS Ingenic JZ47xx: also switch over existing drivers in the tree
     to use this pin controller and consolidate earlier spread out code.
   - Microschip MCP23S08: this driver is migrated from the GPIO
     subsystem and totally rewritten to use proper pin control. All
     users are switched over.

  New subdrivers:
   - Renesas R8A7743 and R8A7745.
   - Allwinner Sunxi A83T R_PIO.
   - Marvell MVEBU Armada CP110 and AP806.
   - Intel Cannon Lake PCH.
   - Qualcomm IPQ8074.

  Notable improvements:
   - IRQ support on the Marvell MVEBU Armada 37xx.
   - Meson driver supports HDMI CEC, AO, I2S, SPDIF and PWM.
   - Rockchip driver now supports iomux-route switching for RK3228,
     RK3328 and RK3399.
   - Rockchip A10 and A20 are merged into a single driver.
   - STM32 has improved GPIO support.
   - Samsung Exynos drivers are split per ARMv7 and ARMv8.
   - Marvell MVEBU is converted to use regmap for register access.

  Maintenance:
   - Several Renesas SH-PFC refactorings and updates.
   - Serious code size cut for Mediatek MT7623.
   - Misc janitorial and MAINTAINERS fixes"

* tag 'pinctrl-v4.13-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: (137 commits)
  pinctrl: samsung: Remove bogus irq_[un]mask from resource management
  pinctrl: rza1: make structures rza1_gpiochip_template and rza1_pinmux_ops static
  pinctrl: rza1: Remove unneeded wrong check for wrong variable
  pinctrl: qcom: Add ipq8074 pinctrl driver
  pinctrl: freescale: imx7d: make of_device_ids const.
  pinctrl: DT: extend the pinmux property to support integers array
  pinctrl: generic: Add output-enable property
  pinctrl: armada-37xx: Fix number of pin in sdio_sb
  pinctrl: armada-37xx: Fix uart2 group selection register mask
  pinctrl: bcm2835: Avoid warning from __irq_do_set_handler
  pinctrl: sh-pfc: r8a7795: Add PWM support
  MAINTAINERS: Add Qualcomm pinctrl drivers section
  arm: dts: dt-bindings: Add Renesas RZ/A1 pinctrl header
  dt-bindings: pinctrl: Add RZ/A1 bindings doc
  pinctrl: Renesas RZ/A1 pin and gpio controller
  pinctrl: sh-pfc: r8a7792: Add SCIF1 and SCIF2 pin groups
  pinctrl.txt: move it to the driver-api book
  pinctrl: ingenic: checking for NULL instead of IS_ERR()
  pinctrl: uniphier: fix WARN_ON() of pingroups dump on LD20
  pinctrl: uniphier: fix WARN_ON() of pingroups dump on LD11
  ...

1 files changed, 46 insertions, 0 deletions

diff --git a/Documentation/devicetree/bindings/gpio/ingenic,gpio.txt b/Documentation/devicetree/bindings/gpio/ingenic,gpio.txt
new file mode 100644
index 000000000000..7988aeb725f4
--- /dev/null
+++ b/Documentation/devicetree/bindings/gpio/ingenic,gpio.txt
@@ -0,0 +1,46 @@
+Ingenic jz47xx GPIO controller
+
+That the Ingenic GPIO driver node must be a sub-node of the Ingenic pinctrl
+driver node.
+
+Required properties:
+--------------------
+
+ - compatible: Must contain one of:
+    - "ingenic,jz4740-gpio"
+    - "ingenic,jz4770-gpio"
+    - "ingenic,jz4780-gpio"
+ - reg: The GPIO bank number.
+ - interrupt-controller: Marks the device node as an interrupt controller.
+ - interrupts: Interrupt specifier for the controllers interrupt.
+ - #interrupt-cells: Should be 2. Refer to
+   ../interrupt-controller/interrupts.txt for more details.
+ - gpio-controller: Marks the device node as a GPIO controller.
+ - #gpio-cells: Should be 2. The first cell is the GPIO number and the second
+    cell specifies GPIO flags, as defined in <dt-bindings/gpio/gpio.h>. Only the
+    GPIO_ACTIVE_HIGH and GPIO_ACTIVE_LOW flags are supported.
+ - gpio-ranges: Range of pins managed by the GPIO controller. Refer to
+   'gpio.txt' in this directory for more details.
+
+Example:
+--------
+
+&pinctrl {
+	#address-cells = <1>;
+	#size-cells = <0>;
+
+	gpa: gpio@0 {
+		compatible = "ingenic,jz4740-gpio";
+		reg = <0>;
+
+		gpio-controller;
+		gpio-ranges = <&pinctrl 0 0 32>;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+
+		interrupt-parent = <&intc>;
+		interrupts = <28>;
+	};
+};