Merge tag 'armsoc-devicetree' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

Pull ARM/arm64 Devicetree updates from Olof Johansson:
 "As usual, device tree updates is the bulk of our material in this
  merge window. This time around, 559 patches affecting both 32- and
  64-bit platforms.

  Changes are too many to list individually, but some of the larger
  ones:

  New platform/SoC support:

   - Automotive:
     + Renesas R-Car D3 (R8A77995)
     + TI DT76x
     + MediaTek mt2712e
   - Communication-oriented:
     + Qualcomm IPQ8074
     + Broadcom Stingray
     + Marvell Armada 8080
   - Set top box:
     + Uniphier PXs3

  Besides some vendor reference boards for the SoC above, there are also
  several new boards/machines:

   - TI AM335x Moxa UC-8100-ME-T open platform
   - TI AM57xx Beaglebone X15 Rev C
   - Microchip/Atmel sama5d27 SoM1 EK
   - Broadcom Raspberry Pi Zero W
   - Gemini-based D-Link DIR-685 router
   - Freescale i.MX6:
     + Toradex Apalis module + Apalis and Ixora carrier boards
     + Engicam GEAM6UL Starter Kit
   - Freescale i.MX53-based Beckhoff CX9020 Embedded PC
   - Mediatek mt7623-based BananaPi R2
   - Several Allwinner-based single-board computers:
  + Cubietruck plus
  + Bananapi M3, M2M and M64
  + NanoPi A64
  + A64-OLinuXino
  + Pine64
   - Rockchip RK3328 Pine64/Rock64 board support
   - Rockchip RK3399 boards:
  + RK3399 Sapphire module on Excavator carrier (RK3399 reference design)
  + Theobroma Systems RK3399-Q7 SoM
   - ZTE ZX296718 PCBOX Board"

* tag 'armsoc-devicetree' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (559 commits)
  ARM: dts: at91: at91sam9g45: add AC97
  arm64: dts: marvell: mcbin: enable more networking ports
  arm64: dts: marvell: add a reference to the sysctrl syscon in the ppv2 node
  arm64: dts: marvell: add TX interrupts for PPv2.2
  arm64: dts: uniphier: add PXs3 SoC support
  ARM: dts: uniphier: add pinctrl groups of ethernet phy mode
  ARM: dts: uniphier: fix size of sdctrl nodes
  ARM: dts: uniphier: add AIDET nodes
  arm64: dts: uniphier: fix size of sdctrl node
  arm64: dts: uniphier: add AIDET nodes
  Revert "ARM: dts: sun8i: h3: Enable dwmac-sun8i on the Beelink X2"
  arm64: dts: uniphier: add reset controller node of analog amplifier
  arm64: dts: marvell: add Device Tree files for Armada-8KP
  arm64: dts: rockchip: add Haikou baseboard with RK3399-Q7 SoM
  arm64: dts: rockchip: add RK3399-Q7 (Puma) SoM
  dt-bindings: add rk3399-q7 SoM
  ARM: dts: rockchip: enable usb for rv1108-evb
  ARM: dts: rockchip: add usb nodes for rv1108 SoCs
  dt-bindings: update grf-binding for rv1108 SoCs
  ARM: dts: aspeed-g4: fix AHB window size of the SMC controllers
  ...

2 files changed, 31 insertions, 21 deletions

diff --git a/Documentation/devicetree/bindings/display/bridge/renesas,dw-hdmi.txt b/Documentation/devicetree/bindings/display/bridge/renesas,dw-hdmi.txt
index cb7ffc58c564..b1a8929c2536 100644
--- a/Documentation/devicetree/bindings/display/bridge/renesas,dw-hdmi.txt
+++ b/Documentation/devicetree/bindings/display/bridge/renesas,dw-hdmi.txt
@@ -13,6 +13,7 @@ Required properties:
 
 - compatible : Shall contain one or more of
   - "renesas,r8a7795-hdmi" for R8A7795 (R-Car H3) compatible HDMI TX
+  - "renesas,r8a7796-hdmi" for R8A7796 (R-Car M3-W) compatible HDMI TX
   - "renesas,rcar-gen3-hdmi" for the generic R-Car Gen3 compatible HDMI TX
 
     When compatible with generic versions, nodes must list the SoC-specific
diff --git a/Documentation/devicetree/bindings/display/renesas,du.txt b/Documentation/devicetree/bindings/display/renesas,du.txt
index c6cb96a4fa93..4bbd1e9bf3be 100644
--- a/Documentation/devicetree/bindings/display/renesas,du.txt
+++ b/Documentation/devicetree/bindings/display/renesas,du.txt
@@ -36,8 +36,10 @@ Required Properties:
       When supplied they must be named "dclkin.x" with "x" being the input
       clock numerical index.
 
-  - vsps: A list of phandles to the VSP nodes that handle the memory
-    interfaces for the DU channels.
+  - vsps: A list of phandle and channel index tuples to the VSPs that handle
+    the memory interfaces for the DU channels. The phandle identifies the VSP
+    instance that serves the DU channel, and the channel index identifies the
+    LIF instance in that VSP.
 
 Required nodes:
 
@@ -59,24 +61,24 @@ corresponding to each DU output.
  R8A7796 (M3-W)	DPAD		HDMI		LVDS		-
 
 
-Example: R8A7790 (R-Car H2) DU
+Example: R8A7795 (R-Car H3) ES2.0 DU
 
-	du: du@feb00000 {
-		compatible = "renesas,du-r8a7790";
-		reg = <0 0xfeb00000 0 0x70000>,
-		      <0 0xfeb90000 0 0x1c>,
-		      <0 0xfeb94000 0 0x1c>;
-		reg-names = "du", "lvds.0", "lvds.1";
-		interrupt-parent = <&gic>;
-		interrupts = <0 256 IRQ_TYPE_LEVEL_HIGH>,
-			     <0 268 IRQ_TYPE_LEVEL_HIGH>,
-			     <0 269 IRQ_TYPE_LEVEL_HIGH>;
-		clocks = <&mstp7_clks R8A7790_CLK_DU0>,
-		         <&mstp7_clks R8A7790_CLK_DU1>,
-		         <&mstp7_clks R8A7790_CLK_DU2>,
-		         <&mstp7_clks R8A7790_CLK_LVDS0>,
-		         <&mstp7_clks R8A7790_CLK_LVDS1>;
-		clock-names = "du.0", "du.1", "du.2", "lvds.0", "lvds.1";
+	du: display@feb00000 {
+		compatible = "renesas,du-r8a7795";
+		reg = <0 0xfeb00000 0 0x80000>,
+		      <0 0xfeb90000 0 0x14>;
+		reg-names = "du", "lvds.0";
+		interrupts = <GIC_SPI 256 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 268 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 269 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 270 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&cpg CPG_MOD 724>,
+			 <&cpg CPG_MOD 723>,
+			 <&cpg CPG_MOD 722>,
+			 <&cpg CPG_MOD 721>,
+			 <&cpg CPG_MOD 727>;
+		clock-names = "du.0", "du.1", "du.2", "du.3", "lvds.0";
+		vsps = <&vspd0 0>, <&vspd1 0>, <&vspd2 0>, <&vspd0 1>;
 
 		ports {
 			#address-cells = <1>;
@@ -89,12 +91,19 @@ Example: R8A7790 (R-Car H2) DU
 			};
 			port@1 {
 				reg = <1>;
-				du_out_lvds0: endpoint {
+				du_out_hdmi0: endpoint {
+					remote-endpoint = <&dw_hdmi0_in>;
 				};
 			};
 			port@2 {
 				reg = <2>;
-				du_out_lvds1: endpoint {
+				du_out_hdmi1: endpoint {
+					remote-endpoint = <&dw_hdmi1_in>;
+				};
+			};
+			port@3 {
+				reg = <3>;
+				du_out_lvds0: endpoint {
 				};
 			};
 		};