Merge tag 'armsoc-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

Pull ARM DT updates from Olof Johansson:
 "As usual, the bulk of this release is again DT file contents.

  There's a huge number of changes here, and it's challenging to give a
  crisp overview of just what is in here.  To start with:

  New boards:

   - TI-based DM3730 from LogicPD (Torpedo)
   - Cosmic+ M4 (nommu) initial support (Freescale Vybrid)
   - Raspberry Pi 2 DT files
   - Watchdog on Meson8b
   - Veyron-mickey (ASUS Chromebit) DTS
   - Rockchip rk3228 SoC and eval board
   - Sigma Designs Tango4

  Improvements:

   - Improved support for Qualcomm APQ8084, including Sony Xperia Z DT files
   - Misc new devices for Rockchip rk3036 and rk3288
   - Allwinner updates for misc SoCs and systems

  ... and a _large_ number of other changes across the field.  Devices
  added to SoC DTSI and board DTS files for a number of SoC vendors, new
  product boards on already-supported SoCs, cleanups and refactorings of
  existing DTS/DTSI files and a bunch of other changes"

* tag 'armsoc-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (469 commits)
  ARM: dts: compulab: add new board description
  ARM: versatile: add the syscon LEDs to the DT
  dts: vt8500: Fix errors in SDHC node for WM8505
  ARM: dts: imx6q: clean up unused ipu2grp
  ARM: dts: silk: Add compatible property to "partitions" node
  ARM: dts: gose: Add compatible property to "partitions" node
  ARM: dts: porter: Add compatible property to "partitions" node
  ARM: dts: koelsch: Add compatible property to "partitions" node
  ARM: dts: lager: Add compatible property to "partitions" node
  ARM: dts: bockw: Add compatible property to "partitions" node
  ARM: dts: meson8b: Add watchdog node
  Documentation: watchdog: Add new bindings for meson8b
  ARM: meson: Add status LED for Odroid-C1
  ARM: dts: uniphier: fix a typo in comment block
  ARM: bcm2835: Add the auxiliary clocks to the device tree.
  ARM: bcm2835: Add devicetree for bcm2836 and Raspberry Pi 2 B
  ARM: bcm2835: Move the CPU/peripheral include out of common RPi DT.
  ARM: bcm2835: Split the DT for peripherals from the DT for the CPU
  ARM: realview: set up cache correctly on the PB11MPCore
  ARM: dts: Unify G2D device node with other devices on exynos4
  ...

2 files changed, 68 insertions, 0 deletions

diff --git a/Documentation/devicetree/bindings/clock/arm-syscon-icst.txt b/Documentation/devicetree/bindings/clock/arm-syscon-icst.txt
new file mode 100644
index 000000000000..8b7177cecb36
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/arm-syscon-icst.txt
@@ -0,0 +1,40 @@
+ARM System Controller ICST clocks
+
+The ICS525 and ICS307 oscillators are produced by Integrated Devices
+Technology (IDT). ARM integrated these oscillators deeply into their
+reference designs by adding special control registers that manage such
+oscillators to their system controllers.
+
+The ARM system controller contains logic to serialize and initialize
+an ICST clock request after a write to the 32 bit register at an offset
+into the system controller. Furthermore, to even be able to alter one of
+these frequencies, the system controller must first be unlocked by
+writing a special token to another offset in the system controller.
+
+The ICST oscillator must be provided inside a system controller node.
+
+Required properties:
+- lock-offset: the offset address into the system controller where the
+  unlocking register is located
+- vco-offset: the offset address into the system controller where the
+  ICST control register is located (even 32 bit address)
+- compatible: must be one of "arm,syscon-icst525" or "arm,syscon-icst307"
+- #clock-cells: must be <0>
+- clocks: parent clock, since the ICST needs a parent clock to derive its
+  frequency from, this attribute is compulsory.
+
+Example:
+
+syscon: syscon@10000000 {
+	compatible = "syscon";
+	reg = <0x10000000 0x1000>;
+
+	oscclk0: osc0@0c {
+		compatible = "arm,syscon-icst307";
+		#clock-cells = <0>;
+		lock-offset = <0x20>;
+		vco-offset = <0x0c>;
+		clocks = <&xtal24mhz>;
+	};
+	(...)
+};
diff --git a/Documentation/devicetree/bindings/clock/dove-divider-clock.txt b/Documentation/devicetree/bindings/clock/dove-divider-clock.txt
new file mode 100644
index 000000000000..e3eb0f657c5e
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/dove-divider-clock.txt
@@ -0,0 +1,28 @@
+PLL divider based Dove clocks
+
+Marvell Dove has a 2GHz PLL, which feeds into a set of dividers to provide
+high speed clocks for a number of peripherals.  These dividers are part of
+the PMU, and thus this node should be a child of the PMU node.
+
+The following clocks are provided:
+
+ID	Clock
+-------------
+0	AXI bus clock
+1	GPU clock
+2	VMeta clock
+3	LCD clock
+
+Required properties:
+- compatible : shall be "marvell,dove-divider-clock"
+- reg : shall be the register address of the Core PLL and Clock Divider
+   Control 0 register.  This will cover that register, as well as the
+   Core PLL and Clock Divider Control 1 register.  Thus, it will have
+   a size of 8.
+- #clock-cells : from common clock binding; shall be set to 1
+
+divider_clk: core-clock@0064 {
+	compatible = "marvell,dove-divider-clock";
+	reg = <0x0064 0x8>;
+	#clock-cells = <1>;
+};