Merge tag 'clk-for-linus-3.14-part1' of git://git.linaro.org/people/mike.turquette/linux

Pull clk framework changes from Mike Turquette:
 "The first half of the clk framework pull request is made up almost
  entirely of new platform/driver support.  There are some conversions
  of existing drivers to the common-clock Device Tree binding, and a few
  non-critical fixes to the framework.

  Due to an entirely unnecessary cyclical dependency with the arm-soc
  tree this pull request is broken into two pieces.  The second piece
  will be sent out after arm-soc sends you the pull request that merged
  in core support for the HiSilicon 3620 platform.  That same pull
  request from arm-soc depends on this pull request to merge in those
  HiSilicon bits without causing build failures"

[ Just did the ARM SoC merges, so getting ready for the second clk tree
  pull request   - Linus ]

* tag 'clk-for-linus-3.14-part1' of git://git.linaro.org/people/mike.turquette/linux: (97 commits)
  devicetree: bindings: Document qcom,mmcc
  devicetree: bindings: Document qcom,gcc
  clk: qcom: Add support for MSM8660's global clock controller (GCC)
  clk: qcom: Add support for MSM8974's multimedia clock controller (MMCC)
  clk: qcom: Add support for MSM8974's global clock controller (GCC)
  clk: qcom: Add support for MSM8960's multimedia clock controller (MMCC)
  clk: qcom: Add support for MSM8960's global clock controller (GCC)
  clk: qcom: Add reset controller support
  clk: qcom: Add support for branches/gate clocks
  clk: qcom: Add support for root clock generators (RCGs)
  clk: qcom: Add support for phase locked loops (PLLs)
  clk: qcom: Add a regmap type clock struct
  clk: Add set_rate_and_parent() op
  reset: Silence warning in reset-controller.h
  clk: sirf: re-arch to make the codes support both prima2 and atlas6
  clk: composite: pass mux_hw into determine_rate
  clk: shmobile: Fix MSTP clock array initialization
  clk: shmobile: Fix MSTP clock index
  ARM: dts: Add clock provider specific properties to max77686 node
  clk: max77686: Register OF clock provider
  ...

1 files changed, 39 insertions, 0 deletions

diff --git a/Documentation/devicetree/bindings/clock/silabs,si570.txt b/Documentation/devicetree/bindings/clock/silabs,si570.txt
new file mode 100644
index 000000000000..c09f21e1d98f
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/silabs,si570.txt
@@ -0,0 +1,39 @@
+Binding for Silicon Labs 570, 571, 598 and 599 programmable
+I2C clock generators.
+
+Reference
+This binding uses the common clock binding[1]. Details about the devices can be
+found in the data sheets[2][3].
+
+[1] Documentation/devicetree/bindings/clock/clock-bindings.txt
+[2] Si570/571 Data Sheet
+    http://www.silabs.com/Support%20Documents/TechnicalDocs/si570.pdf
+[3] Si598/599 Data Sheet
+    http://www.silabs.com/Support%20Documents/TechnicalDocs/si598-99.pdf
+
+Required properties:
+ - compatible: Shall be one of "silabs,si570", "silabs,si571",
+			       "silabs,si598", "silabs,si599"
+ - reg: I2C device address.
+ - #clock-cells: From common clock bindings: Shall be 0.
+ - factory-fout: Factory set default frequency. This frequency is part specific.
+		 The correct frequency for the part used has to be provided in
+		 order to generate the correct output frequencies. For more
+		 details, please refer to the data sheet.
+ - temperature-stability: Temperature stability of the device in PPM. Should be
+			  one of: 7, 20, 50 or 100.
+
+Optional properties:
+ - clock-output-names: From common clock bindings. Recommended to be "si570".
+ - clock-frequency: Output frequency to generate. This defines the output
+		    frequency set during boot. It can be reprogrammed during
+		    runtime through the common clock framework.
+
+Example:
+	si570: clock-generator@5d {
+		#clock-cells = <0>;
+		compatible = "silabs,si570";
+		temperature-stability = <50>;
+		reg = <0x5d>;
+		factory-fout = <156250000>;
+	};