ARM: tegra30: create a DT header defining CLK IDs

Create a header file to define the clock IDs used by the Tegra30 clock
binding. Remove the list of definitions from the binding documentation,
and refer the reader to the header file.

This will allow the same header to be used by both device tree files,
and drivers implementing this binding, which guarantees that the two
stay in sync. This also makes device trees more readable by using names
instead of magic numbers.

Signed-off-by: Hiroshi Doyu <hdoyu@nvidia.com>
[swarren, add header to clock/ instead of clk/ to match binding location]
Signed-off-by: Stephen Warren <swarren@nvidia.com>

1 files changed, 4 insertions, 207 deletions

diff --git a/Documentation/devicetree/bindings/clock/nvidia,tegra30-car.txt b/Documentation/devicetree/bindings/clock/nvidia,tegra30-car.txt
index f3da3be5fcad..0f714081e986 100644
--- a/Documentation/devicetree/bindings/clock/nvidia,tegra30-car.txt
+++ b/Documentation/devicetree/bindings/clock/nvidia,tegra30-car.txt
@@ -12,212 +12,9 @@ Required properties :
 - clocks : Should contain phandle and clock specifiers for two clocks:
   the 32 KHz "32k_in", and the board-specific oscillator "osc".
 - #clock-cells : Should be 1.
-  In clock consumers, this cell represents the clock ID exposed by the CAR.
-
-  The first 130 clocks are numbered to match the bits in the CAR's CLK_OUT_ENB
-  registers. These IDs often match those in the CAR's RST_DEVICES registers,
-  but not in all cases. Some bits in CLK_OUT_ENB affect multiple clocks. In
-  this case, those clocks are assigned IDs above 160 in order to highlight
-  this issue. Implementations that interpret these clock IDs as bit values
-  within the CLK_OUT_ENB or RST_DEVICES registers should be careful to
-  explicitly handle these special cases.
-
-  The balance of the clocks controlled by the CAR are assigned IDs of 160 and
-  above.
-
-  0	cpu
-  1	unassigned
-  2	unassigned
-  3	unassigned
-  4	rtc
-  5	timer
-  6	uarta
-  7	unassigned	(register bit affects uartb and vfir)
-  8	gpio
-  9	sdmmc2
-  10	unassigned	(register bit affects spdif_in and spdif_out)
-  11	i2s1
-  12	i2c1
-  13	ndflash
-  14	sdmmc1
-  15	sdmmc4
-  16	unassigned
-  17	pwm
-  18	i2s2
-  19	epp
-  20	unassigned	(register bit affects vi and vi_sensor)
-  21	2d
-  22	usbd
-  23	isp
-  24	3d
-  25	unassigned
-  26	disp2
-  27	disp1
-  28	host1x
-  29	vcp
-  30	i2s0
-  31	cop_cache
-
-  32	mc
-  33	ahbdma
-  34	apbdma
-  35	unassigned
-  36	kbc
-  37	statmon
-  38	pmc
-  39	unassigned	(register bit affects fuse and fuse_burn)
-  40	kfuse
-  41	sbc1
-  42	nor
-  43	unassigned
-  44	sbc2
-  45	unassigned
-  46	sbc3
-  47	i2c5
-  48	dsia
-  49	unassigned	(register bit affects cve and tvo)
-  50	mipi
-  51	hdmi
-  52	csi
-  53	tvdac
-  54	i2c2
-  55	uartc
-  56	unassigned
-  57	emc
-  58	usb2
-  59	usb3
-  60	mpe
-  61	vde
-  62	bsea
-  63	bsev
-
-  64	speedo
-  65	uartd
-  66	uarte
-  67	i2c3
-  68	sbc4
-  69	sdmmc3
-  70	pcie
-  71	owr
-  72	afi
-  73	csite
-  74	pciex
-  75	avpucq
-  76	la
-  77	unassigned
-  78	unassigned
-  79	dtv
-  80	ndspeed
-  81	i2cslow
-  82	dsib
-  83	unassigned
-  84	irama
-  85	iramb
-  86	iramc
-  87	iramd
-  88	cram2
-  89	unassigned
-  90	audio_2x	a/k/a audio_2x_sync_clk
-  91	unassigned
-  92	csus
-  93	cdev2
-  94	cdev1
-  95	unassigned
-
-  96	cpu_g
-  97	cpu_lp
-  98	3d2
-  99	mselect
-  100	tsensor
-  101	i2s3
-  102	i2s4
-  103	i2c4
-  104	sbc5
-  105	sbc6
-  106	d_audio
-  107	apbif
-  108	dam0
-  109	dam1
-  110	dam2
-  111	hda2codec_2x
-  112	atomics
-  113	audio0_2x
-  114	audio1_2x
-  115	audio2_2x
-  116	audio3_2x
-  117	audio4_2x
-  118	audio5_2x
-  119	actmon
-  120	extern1
-  121	extern2
-  122	extern3
-  123	sata_oob
-  124	sata
-  125	hda
-  127	se
-  128	hda2hdmi
-  129	sata_cold
-
-  160	uartb
-  161	vfir
-  162	spdif_in
-  163	spdif_out
-  164	vi
-  165	vi_sensor
-  166	fuse
-  167	fuse_burn
-  168	cve
-  169	tvo
-
-  170	clk_32k
-  171	clk_m
-  172	clk_m_div2
-  173	clk_m_div4
-  174	pll_ref
-  175	pll_c
-  176	pll_c_out1
-  177	pll_m
-  178	pll_m_out1
-  179	pll_p
-  180	pll_p_out1
-  181	pll_p_out2
-  182	pll_p_out3
-  183	pll_p_out4
-  184	pll_a
-  185	pll_a_out0
-  186	pll_d
-  187	pll_d_out0
-  188	pll_d2
-  189	pll_d2_out0
-  190	pll_u
-  191	pll_x
-  192	pll_x_out0
-  193	pll_e
-  194	spdif_in_sync
-  195	i2s0_sync
-  196	i2s1_sync
-  197	i2s2_sync
-  198	i2s3_sync
-  199	i2s4_sync
-  200	vimclk
-  201	audio0
-  202	audio1
-  203	audio2
-  204	audio3
-  205	audio4
-  206	audio5
-  207	clk_out_1 (extern1)
-  208	clk_out_2 (extern2)
-  209	clk_out_3 (extern3)
-  210	sclk
-  211	blink
-  212	cclk_g
-  213	cclk_lp
-  214	twd
-  215	cml0
-  216	cml1
-  217	hclk
-  218	pclk
+  In clock consumers, this cell represents the clock ID exposed by the
+  CAR. The assignments may be found in header file
+  <dt-bindings/clock/tegra30-car.h>.
 
 Example SoC include file:
 
@@ -229,7 +26,7 @@ Example SoC include file:
 	};
 
 	usb@c5004000 {
-		clocks = <&tegra_car 58>; /* usb2 */
+		clocks = <&tegra_car TEGRA30_CLK_USB2>;
 	};
 };