Merge tag 'clk-for-linus-4.5' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux

Pull clk framework updates from Michael Turquette:
 "The clk framework and driver changes for 4.5 look pretty typical.  The
  bulk of the changes are to clk controller drivers, though some
  improvements to the core and some re-usable blocks/templates also
  received some love.

  In this past cycle the clk maintainers developed a good workflow for
  handling the common case of patch submissions containing a new
  drivers, new shared Device Tree header and a new Device Tree binding
  description.  This requires coordination with the Device Tree
  maintainers and with the architecture maintainers (typically the
  arm-soc tree in our case).

  This explains the increase in changes to include/dt-bindings/... and
  to Documentation/devicetree/bindings/clock/... coming from the clk
  tree.  The same commits can be expected to come through those trees on
  occasion, through the use of shared, immutable branches"

* tag 'clk-for-linus-4.5' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: (125 commits)
  clk: remove duplicated COMMON_CLK_NXP record from clk/Kconfig
  clk: fix clk-gpio.c with optional clock= DT property
  clk: rockchip: fix section mismatches with new child-clocks
  clk: gpio: handle error codes for of_clk_get_parent_count()
  clk: gpio: fix memory leak
  clk: shmobile: r8a7795: Add SATA0 clock
  clk: bcm2835: Add PWM clock support
  clk: bcm2835: Support for clock parent selection
  clk: bcm2835: add a round up ability to the clock divisor
  clk: lpc32xx: add common clock framework driver
  clk: lpc18xx: add NXP specific COMMON_CLK_NXP configuration symbol
  dt-bindings: clock: add NXP LPC32xx clock list for consumers
  dt-bindings: clock: add description of LPC32xx USB clock controller
  dt-bindings: clock: add description of LPC32xx clock controller
  clk: rockchip: rk3036: include downstream muxes into fractional dividers
  clk: add flag for clocks that need to be enabled on rate changes
  clk: rockchip: Allow the RK3288 SPDIF clocks to change their parent
  clk: rockchip: include downstream muxes into fractional dividers
  clk: rockchip: handle mux dependency of fractional dividers
  clk: bcm2835: Add a driver for the auxiliary peripheral clock gates.
  ...

1 files changed, 56 insertions, 0 deletions

diff --git a/Documentation/devicetree/bindings/clock/nvidia,tegra210-car.txt b/Documentation/devicetree/bindings/clock/nvidia,tegra210-car.txt
new file mode 100644
index 000000000000..26f237f641b7
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/nvidia,tegra210-car.txt
@@ -0,0 +1,56 @@
+NVIDIA Tegra210 Clock And Reset Controller
+
+This binding uses the common clock binding:
+Documentation/devicetree/bindings/clock/clock-bindings.txt
+
+The CAR (Clock And Reset) Controller on Tegra is the HW module responsible
+for muxing and gating Tegra's clocks, and setting their rates.
+
+Required properties :
+- compatible : Should be "nvidia,tegra210-car"
+- reg : Should contain CAR registers location and length
+- clocks : Should contain phandle and clock specifiers for two clocks:
+  the 32 KHz "32k_in".
+- #clock-cells : Should be 1.
+  In clock consumers, this cell represents the clock ID exposed by the
+  CAR. The assignments may be found in header file
+  <dt-bindings/clock/tegra210-car.h>.
+- #reset-cells : Should be 1.
+  In clock consumers, this cell represents the bit number in the CAR's
+  array of CLK_RST_CONTROLLER_RST_DEVICES_* registers.
+
+Example SoC include file:
+
+/ {
+	tegra_car: clock {
+		compatible = "nvidia,tegra210-car";
+		reg = <0x60006000 0x1000>;
+		#clock-cells = <1>;
+		#reset-cells = <1>;
+	};
+
+	usb@c5004000 {
+		clocks = <&tegra_car TEGRA210_CLK_USB2>;
+	};
+};
+
+Example board file:
+
+/ {
+	clocks {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		clk_32k: clock@1 {
+			compatible = "fixed-clock";
+			reg = <1>;
+			#clock-cells = <0>;
+			clock-frequency = <32768>;
+		};
+	};
+
+	&tegra_car {
+		clocks = <&clk_32k>;
+	};
+};