Merge tag 'soc' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

Pull ARM SoC-specific updates from Arnd Bergmann:
 "This is a larger set of new functionality for the existing SoC
  families, including:

   - vt8500 gains support for new CPU cores, notably the Cortex-A9 based
     wm8850

   - prima2 gains support for the "marco" SoC family, its SMP based
     cousin

   - tegra gains support for the new Tegra4 (Tegra114) family

   - socfpga now supports a newer version of the hardware including SMP

   - i.mx31 and bcm2835 are now using DT probing for their clocks

   - lots of updates for sh-mobile

   - OMAP updates for clocks, power management and USB

   - i.mx6q and tegra now support cpuidle

   - kirkwood now supports PCIe hot plugging

   - tegra clock support is updated

   - tegra USB PHY probing gets implemented diffently"

* tag 'soc' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (148 commits)
  ARM: prima2: remove duplicate v7_invalidate_l1
  ARM: shmobile: r8a7779: Correct TMU clock support again
  ARM: prima2: fix __init section for cpu hotplug
  ARM: OMAP: Consolidate OMAP USB-HS platform data (part 3/3)
  ARM: OMAP: Consolidate OMAP USB-HS platform data (part 1/3)
  arm: socfpga: Add SMP support for actual socfpga harware
  arm: Add v7_invalidate_l1 to cache-v7.S
  arm: socfpga: Add entries to enable make dtbs socfpga
  arm: socfpga: Add new device tree source for actual socfpga HW
  ARM: tegra: sort Kconfig selects for Tegra114
  ARM: tegra: enable ARCH_REQUIRE_GPIOLIB for Tegra114
  ARM: tegra: Fix build error w/ ARCH_TEGRA_114_SOC w/o ARCH_TEGRA_3x_SOC
  ARM: tegra: Fix build error for gic update
  ARM: tegra: remove empty tegra_smp_init_cpus()
  ARM: shmobile: Register ARM architected timer
  ARM: MARCO: fix the build issue due to gic-vic-to-irqchip move
  ARM: shmobile: r8a7779: Correct TMU clock support
  ARM: mxs_defconfig: Select CONFIG_DEVTMPFS_MOUNT
  ARM: mxs: decrease mxs_clockevent_device.min_delta_ns to 2 clock cycles
  ARM: mxs: use apbx bus clock to drive the timers on timrotv2
  ...

1 files changed, 91 insertions, 0 deletions

diff --git a/Documentation/devicetree/bindings/clock/imx31-clock.txt b/Documentation/devicetree/bindings/clock/imx31-clock.txt
new file mode 100644
index 000000000000..19df842c694f
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/imx31-clock.txt
@@ -0,0 +1,91 @@
+* Clock bindings for Freescale i.MX31
+
+Required properties:
+- compatible: Should be "fsl,imx31-ccm"
+- reg: Address and length of the register set
+- interrupts: Should contain CCM interrupt
+- #clock-cells: Should be <1>
+
+The clock consumer should specify the desired clock by having the clock
+ID in its "clocks" phandle cell.  The following is a full list of i.MX31
+clocks and IDs.
+
+	Clock		    ID
+	-----------------------
+	dummy	             0
+	ckih                 1
+	ckil                 2
+	mpll                 3
+	spll                 4
+	upll                 5
+	mcu_main             6
+	hsp                  7
+	ahb                  8
+	nfc                  9
+	ipg                  10
+	per_div              11
+	per                  12
+	csi_sel              13
+	fir_sel              14
+	csi_div              15
+	usb_div_pre          16
+	usb_div_post         17
+	fir_div_pre          18
+	fir_div_post         19
+	sdhc1_gate           20
+	sdhc2_gate           21
+	gpt_gate             22
+	epit1_gate           23
+	epit2_gate           24
+	iim_gate             25
+	ata_gate             26
+	sdma_gate            27
+	cspi3_gate           28
+	rng_gate             29
+	uart1_gate           30
+	uart2_gate           31
+	ssi1_gate            32
+	i2c1_gate            33
+	i2c2_gate            34
+	i2c3_gate            35
+	hantro_gate          36
+	mstick1_gate         37
+	mstick2_gate         38
+	csi_gate             39
+	rtc_gate             40
+	wdog_gate            41
+	pwm_gate             42
+	sim_gate             43
+	ect_gate             44
+	usb_gate             45
+	kpp_gate             46
+	ipu_gate             47
+	uart3_gate           48
+	uart4_gate           49
+	uart5_gate           50
+	owire_gate           51
+	ssi2_gate            52
+	cspi1_gate           53
+	cspi2_gate           54
+	gacc_gate            55
+	emi_gate             56
+	rtic_gate            57
+	firi_gate            58
+
+Examples:
+
+clks: ccm@53f80000{
+	compatible = "fsl,imx31-ccm";
+	reg = <0x53f80000 0x4000>;
+	interrupts = <0 31 0x04 0 53 0x04>;
+	#clock-cells = <1>;
+};
+
+uart1: serial@43f90000 {
+	compatible = "fsl,imx31-uart", "fsl,imx21-uart";
+	reg = <0x43f90000 0x4000>;
+	interrupts = <45>;
+	clocks = <&clks 10>, <&clks 30>;
+	clock-names = "ipg", "per";
+	status = "disabled";
+};