summaryrefslogtreecommitdiff
path: root/Documentation/arm/stm32/stm32f769-overview.rst
diff options
context:
space:
mode:
authorLinus Torvalds <torvalds@linux-foundation.org>2018-04-06 07:21:08 +0300
committerLinus Torvalds <torvalds@linux-foundation.org>2018-04-06 07:21:08 +0300
commit167569343fac74ec6825a3ab982f795b5880e63e (patch)
tree965adb59fbe10d9f45a7fb90cb1ec1bc18d4613c /Documentation/arm/stm32/stm32f769-overview.rst
parentb240b419db5d624ce7a5a397d6f62a1a686009ec (diff)
parentcd903711fd9dce808b5cc07e509135886d962b0c (diff)
downloadlinux-167569343fac74ec6825a3ab982f795b5880e63e.tar.xz
Merge tag 'armsoc-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc
Pull ARM SoC platform updates from Arnd Bergmann: "This release brings up a new platform based on the old ARM9 core: the Nuvoton NPCM is used as a baseboard management controller, competing with the better known ASpeed AST2xx series. Another important change is the addition of ARMv7-A based chips in mach-stm32. The older parts in this platform are ARMv7-M based microcontrollers, now they are expanding to general-purpose workloads. The other changes are the usual defconfig updates to enable additional drivers, lesser bugfixes. The largest updates as often are the ongoing OMAP cleanups, but we also have a number of changes for the older PXA and davinci platforms this time. For the Renesas shmobile/r-car platform, some new infrastructure is needed to make the watchdog work correctly. Supporting Multiprocessing on Allwinner A80 required a significant amount of new code, but is not doing anything unexpected" * tag 'armsoc-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (179 commits) arm: npcm: modify configuration for the NPCM7xx BMC. MAINTAINERS: update entry for ARM/berlin ARM: omap2: fix am43xx build without L2X0 ARM: davinci: da8xx: simplify CFGCHIP regmap_config ARM: davinci: da8xx: fix oops in USB PHY driver due to stack allocated platform_data ARM: multi_v7_defconfig: add NXP FlexCAN IP support ARM: multi_v7_defconfig: enable thermal driver for i.MX devices ARM: multi_v7_defconfig: add RN5T618 PMIC family support ARM: multi_v7_defconfig: add NXP graphics drivers ARM: multi_v7_defconfig: add GPMI NAND controller support ARM: multi_v7_defconfig: add OCOTP driver for NXP SoCs ARM: multi_v7_defconfig: configure I2C driver built-in arm64: defconfig: add CONFIG_UNIPHIER_THERMAL and CONFIG_SNI_AVE ARM: imx: fix imx6sll-only build ARM: imx: select ARM_CPU_SUSPEND for CPU_IDLE as well ARM: mxs_defconfig: Re-sync defconfig ARM: imx_v4_v5_defconfig: Use the generic fsl-asoc-card driver ARM: imx_v4_v5_defconfig: Re-sync defconfig arm64: defconfig: enable stmmac ethernet to defconfig ARM: EXYNOS: Simplify code in coupled CPU idle hot path ...
Diffstat (limited to 'Documentation/arm/stm32/stm32f769-overview.rst')
-rw-r--r--Documentation/arm/stm32/stm32f769-overview.rst35
1 files changed, 35 insertions, 0 deletions
diff --git a/Documentation/arm/stm32/stm32f769-overview.rst b/Documentation/arm/stm32/stm32f769-overview.rst
new file mode 100644
index 000000000000..228656ced2fe
--- /dev/null
+++ b/Documentation/arm/stm32/stm32f769-overview.rst
@@ -0,0 +1,35 @@
+STM32F769 Overview
+==================
+
+Introduction
+------------
+
+The STM32F769 is a Cortex-M7 MCU aimed at various applications.
+It features:
+
+- Cortex-M7 core running up to @216MHz
+- 2MB internal flash, 512KBytes internal RAM (+4KB of backup SRAM)
+- FMC controller to connect SDRAM, NOR and NAND memories
+- Dual mode QSPI
+- SD/MMC/SDIO support*2
+- Ethernet controller
+- USB OTFG FS & HS controllers
+- I2C*4, SPI*6, CAN*3 busses support
+- Several 16 & 32 bits general purpose timers
+- Serial Audio interface*2
+- LCD controller
+- HDMI-CEC
+- DSI
+- SPDIFRX
+- MDIO salave interface
+
+Resources
+---------
+
+Datasheet and reference manual are publicly available on ST website (STM32F769_).
+
+.. _STM32F769: http://www.st.com/content/st_com/en/products/microcontrollers/stm32-32-bit-arm-cortex-mcus/stm32-high-performance-mcus/stm32f7-series/stm32f7x9/stm32f769ni.html
+
+:Authors:
+
+Alexandre Torgue <alexandre.torgue@st.com>