Merge tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux

Pull arm64 updates from Catalin Marinas:
 "Apart from the arm64-specific bits (core arch and perf, new arm64
  selftests), it touches the generic cow_user_page() (reviewed by
  Kirill) together with a macro for x86 to preserve the existing
  behaviour on this architecture.

  Summary:

   - On ARMv8 CPUs without hardware updates of the access flag, avoid
     failing cow_user_page() on PFN mappings if the pte is old. The
     patches introduce an arch_faults_on_old_pte() macro, defined as
     false on x86. When true, cow_user_page() makes the pte young before
     attempting __copy_from_user_inatomic().

   - Covert the synchronous exception handling paths in
     arch/arm64/kernel/entry.S to C.

   - FTRACE_WITH_REGS support for arm64.

   - ZONE_DMA re-introduced on arm64 to support Raspberry Pi 4

   - Several kselftest cases specific to arm64, together with a
     MAINTAINERS update for these files (moved to the ARM64 PORT entry).

   - Workaround for a Neoverse-N1 erratum where the CPU may fetch stale
     instructions under certain conditions.

   - Workaround for Cortex-A57 and A72 errata where the CPU may
     speculatively execute an AT instruction and associate a VMID with
     the wrong guest page tables (corrupting the TLB).

   - Perf updates for arm64: additional PMU topologies on HiSilicon
     platforms, support for CCN-512 interconnect, AXI ID filtering in
     the IMX8 DDR PMU, support for the CCPI2 uncore PMU in ThunderX2.

   - GICv3 optimisation to avoid a heavy barrier when accessing the
     ICC_PMR_EL1 register.

   - ELF HWCAP documentation updates and clean-up.

   - SMC calling convention conduit code clean-up.

   - KASLR diagnostics printed during boot

   - NVIDIA Carmel CPU added to the KPTI whitelist

   - Some arm64 mm clean-ups: use generic free_initrd_mem(), remove
     stale macro, simplify calculation in __create_pgd_mapping(), typos.

   - Kconfig clean-ups: CMDLINE_FORCE to depend on CMDLINE, choice for
     endinanness to help with allmodconfig"

* tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: (93 commits)
  arm64: Kconfig: add a choice for endianness
  kselftest: arm64: fix spelling mistake "contiguos" -> "contiguous"
  arm64: Kconfig: make CMDLINE_FORCE depend on CMDLINE
  MAINTAINERS: Add arm64 selftests to the ARM64 PORT entry
  arm64: kaslr: Check command line before looking for a seed
  arm64: kaslr: Announce KASLR status on boot
  kselftest: arm64: fake_sigreturn_misaligned_sp
  kselftest: arm64: fake_sigreturn_bad_size
  kselftest: arm64: fake_sigreturn_duplicated_fpsimd
  kselftest: arm64: fake_sigreturn_missing_fpsimd
  kselftest: arm64: fake_sigreturn_bad_size_for_magic0
  kselftest: arm64: fake_sigreturn_bad_magic
  kselftest: arm64: add helper get_current_context
  kselftest: arm64: extend test_init functionalities
  kselftest: arm64: mangle_pstate_invalid_mode_el[123][ht]
  kselftest: arm64: mangle_pstate_invalid_daif_bits
  kselftest: arm64: mangle_pstate_invalid_compat_toggle and common utils
  kselftest: arm64: extend toplevel skeleton Makefile
  drivers/perf: hisi: update the sccl_id/ccl_id for certain HiSilicon platform
  arm64: mm: reserve CMA and crashkernel in ZONE_DMA32
  ...

2 files changed, 23 insertions, 12 deletions

diff --git a/Documentation/admin-guide/perf/imx-ddr.rst b/Documentation/admin-guide/perf/imx-ddr.rst
index 517a205abad6..90056e4e8859 100644
--- a/Documentation/admin-guide/perf/imx-ddr.rst
+++ b/Documentation/admin-guide/perf/imx-ddr.rst
@@ -17,7 +17,8 @@ The "format" directory describes format of the config (event ID) and config1
 (AXI filtering) fields of the perf_event_attr structure, see /sys/bus/event_source/
 devices/imx8_ddr0/format/. The "events" directory describes the events types
 hardware supported that can be used with perf tool, see /sys/bus/event_source/
-devices/imx8_ddr0/events/.
+devices/imx8_ddr0/events/. The "caps" directory describes filter features implemented
+in DDR PMU, see /sys/bus/events_source/devices/imx8_ddr0/caps/.
   e.g.::
         perf stat -a -e imx8_ddr0/cycles/ cmd
         perf stat -a -e imx8_ddr0/read/,imx8_ddr0/write/ cmd
@@ -25,9 +26,12 @@ devices/imx8_ddr0/events/.
 AXI filtering is only used by CSV modes 0x41 (axid-read) and 0x42 (axid-write)
 to count reading or writing matches filter setting. Filter setting is various
 from different DRAM controller implementations, which is distinguished by quirks
-in the driver.
+in the driver. You also can dump info from userspace, filter in "caps" directory
+indicates whether PMU supports AXI ID filter or not; enhanced_filter indicates
+whether PMU supports enhanced AXI ID filter or not. Value 0 for un-supported, and
+value 1 for supported.
 
-* With DDR_CAP_AXI_ID_FILTER quirk.
+* With DDR_CAP_AXI_ID_FILTER quirk(filter: 1, enhanced_filter: 0).
   Filter is defined with two configuration parts:
   --AXI_ID defines AxID matching value.
   --AXI_MASKING defines which bits of AxID are meaningful for the matching.
@@ -50,3 +54,8 @@ in the driver.
   axi_id to monitor a specific id, rather than having to specify axi_mask.
   e.g.::
         perf stat -a -e imx8_ddr0/axid-read,axi_id=0x12/ cmd, which will monitor ARID=0x12
+
+* With DDR_CAP_AXI_ID_FILTER_ENHANCED quirk(filter: 1, enhanced_filter: 1).
+  This is an extension to the DDR_CAP_AXI_ID_FILTER quirk which permits
+  counting the number of bytes (as opposed to the number of bursts) from DDR
+  read and write transactions concurrently with another set of data counters.
diff --git a/Documentation/admin-guide/perf/thunderx2-pmu.rst b/Documentation/admin-guide/perf/thunderx2-pmu.rst
index 08e33675853a..01f158238ae1 100644
--- a/Documentation/admin-guide/perf/thunderx2-pmu.rst
+++ b/Documentation/admin-guide/perf/thunderx2-pmu.rst
@@ -3,24 +3,26 @@ Cavium ThunderX2 SoC Performance Monitoring Unit (PMU UNCORE)
 =============================================================
 
 The ThunderX2 SoC PMU consists of independent, system-wide, per-socket
-PMUs such as the Level 3 Cache (L3C) and DDR4 Memory Controller (DMC).
+PMUs such as the Level 3 Cache (L3C), DDR4 Memory Controller (DMC) and
+Cavium Coherent Processor Interconnect (CCPI2).
 
 The DMC has 8 interleaved channels and the L3C has 16 interleaved tiles.
 Events are counted for the default channel (i.e. channel 0) and prorated
 to the total number of channels/tiles.
 
-The DMC and L3C support up to 4 counters. Counters are independently
-programmable and can be started and stopped individually. Each counter
-can be set to a different event. Counters are 32-bit and do not support
-an overflow interrupt; they are read every 2 seconds.
+The DMC and L3C support up to 4 counters, while the CCPI2 supports up to 8
+counters. Counters are independently programmable to different events and
+can be started and stopped individually. None of the counters support an
+overflow interrupt. DMC and L3C counters are 32-bit and read every 2 seconds.
+The CCPI2 counters are 64-bit and assumed not to overflow in normal operation.
 
 PMU UNCORE (perf) driver:
 
 The thunderx2_pmu driver registers per-socket perf PMUs for the DMC and
-L3C devices.  Each PMU can be used to count up to 4 events
-simultaneously. The PMUs provide a description of their available events
-and configuration options under sysfs, see
-/sys/devices/uncore_<l3c_S/dmc_S/>; S is the socket id.
+L3C devices.  Each PMU can be used to count up to 4 (DMC/L3C) or up to 8
+(CCPI2) events simultaneously. The PMUs provide a description of their
+available events and configuration options under sysfs, see
+/sys/devices/uncore_<l3c_S/dmc_S/ccpi2_S/>; S is the socket id.
 
 The driver does not support sampling, therefore "perf record" will not
 work. Per-task perf sessions are also not supported.