diff options
| author | Linus Torvalds <torvalds@linux-foundation.org> | 2016-08-02 04:44:08 +0300 |
|---|---|---|
| committer | Linus Torvalds <torvalds@linux-foundation.org> | 2016-08-02 04:44:08 +0300 |
| commit | 731c7d3a205ba89b475b2aa71b5f13dd6ae3de56 (patch) | |
| tree | d2b9c3e0a98b94dfc3e4e60e35622c0143ef4ed4 /Documentation/DocBook | |
| parent | 77a87824ed676ca8ff8482e4157d3adb284fd381 (diff) | |
| parent | 753e7c8cbd8c503b962294303c7b5e9ea8513443 (diff) | |
| download | linux-731c7d3a205ba89b475b2aa71b5f13dd6ae3de56.tar.xz | |
Merge tag 'drm-for-v4.8' of git://people.freedesktop.org/~airlied/linux
Merge drm updates from Dave Airlie:
"This is the main drm pull request for 4.8.
I'm down with a cold at the moment so hopefully this isn't in too bad
a state, I finished pulling stuff last week mostly (nouveau fixes just
went in today), so only this message should be influenced by illness.
Apologies to anyone who's major feature I missed :-)
Core:
Lockless GEM BO freeing
Non-blocking atomic work
Documentation changes (rst/sphinx)
Prep for new fencing changes
Simple display helpers
Master/auth changes
Register/unregister rework
Loads of trivial patches/fixes.
New stuff:
ARM Mali display driver (not the 3D chip)
sii902x RGB->HDMI bridge
Panel:
Support for new panels
Improved backlight support
Bridge:
Convert ADV7511 to bridge driver
ADV7533 support
TC358767 (DSI/DPI to eDP) encoder chip support
i915:
BXT support enabled by default
GVT-g infrastructure
GuC command submission and fixes
BXT workarounds
SKL/BKL workarounds
Demidlayering device registration
Thundering herd fixes
Missing pci ids
Atomic updates
amdgpu/radeon:
ATPX improvements for better dGPU power control on PX systems
New power features for CZ/BR/ST
Pipelined BO moves and evictions in TTM
GPU scheduler improvements
GPU reset improvements
Overclocking on dGPUs with amdgpu
Polaris powermanagement enabled
nouveau:
GK20A/GM20B volt and clock improvements.
Initial support for GP100/GP104 GPUs, GP104 will not yet support
acceleration due to NVIDIA having not released firmware for them as of yet.
exynos:
Exynos5433 SoC with IOMMU support.
vc4:
Shader validation for branching
imx-drm:
Atomic mode setting conversion
Reworked DMFC FIFO allocation
External bridge support
analogix-dp:
RK3399 eDP support
Lots of fixes.
rockchip:
Lots of small fixes.
msm:
DT bindings cleanups
Shrinker and madvise support
ASoC HDMI codec support
tegra:
Host1x driver cleanups
SOR reworking for DP support
Runtime PM support
omapdrm:
PLL enhancements
Header refactoring
Gamma table support
arcgpu:
Simulator support
virtio-gpu:
Atomic modesetting fixes.
rcar-du:
Misc fixes.
mediatek:
MT8173 HDMI support
sti:
ASOC HDMI codec support
Minor fixes
fsl-dcu:
Suspend/resume support
Bridge support
amdkfd:
Minor fixes.
etnaviv:
Enable GPU clock gating
hisilicon:
Vblank and other fixes"
* tag 'drm-for-v4.8' of git://people.freedesktop.org/~airlied/linux: (1575 commits)
drm/nouveau/gr/nv3x: fix instobj write offsets in gr setup
drm/nouveau/acpi: fix lockup with PCIe runtime PM
drm/nouveau/acpi: check for function 0x1B before using it
drm/nouveau/acpi: return supported DSM functions
drm/nouveau/acpi: ensure matching ACPI handle and supported functions
drm/nouveau/fbcon: fix font width not divisible by 8
drm/amd/powerplay: remove enable_clock_power_gatings_tasks from initialize and resume events
drm/amd/powerplay: move clockgating to after ungating power in pp for uvd/vce
drm/amdgpu: add query device id and revision id into system info entry at CGS
drm/amdgpu: add new definition in bif header
drm/amd/powerplay: rename smum header guards
drm/amdgpu: enable UVD context buffer for older HW
drm/amdgpu: fix default UVD context size
drm/amdgpu: fix incorrect type of info_id
drm/amdgpu: make amdgpu_cgs_call_acpi_method as static
drm/amdgpu: comment out unused defaults_staturn_pro static const structure to fix the build
drm/amdgpu: enable UVD VM only on polaris
drm/amdgpu: increase timeout of IB test
drm/amdgpu: add destroy session when generate VCE destroy msg.
drm/amd: fix deadlock of job_list_lock V2
...
Diffstat (limited to 'Documentation/DocBook')
| -rw-r--r-- | Documentation/DocBook/Makefile | 2 | ||||
| -rw-r--r-- | Documentation/DocBook/device-drivers.tmpl | 4 | ||||
| -rw-r--r-- | Documentation/DocBook/gpu.tmpl | 3540 |
3 files changed, 5 insertions, 3541 deletions
diff --git a/Documentation/DocBook/Makefile b/Documentation/DocBook/Makefile index 01bab5014a4a..8e6dd4b14314 100644 --- a/Documentation/DocBook/Makefile +++ b/Documentation/DocBook/Makefile @@ -16,7 +16,7 @@ DOCBOOKS := z8530book.xml device-drivers.xml \ genericirq.xml s390-drivers.xml uio-howto.xml scsi.xml \ 80211.xml debugobjects.xml sh.xml regulator.xml \ alsa-driver-api.xml writing-an-alsa-driver.xml \ - tracepoint.xml gpu.xml media_api.xml w1.xml \ + tracepoint.xml media_api.xml w1.xml \ writing_musb_glue_layer.xml crypto-API.xml iio.xml include Documentation/DocBook/media/Makefile diff --git a/Documentation/DocBook/device-drivers.tmpl b/Documentation/DocBook/device-drivers.tmpl index 99cdc05bbb7a..9c10030eb2be 100644 --- a/Documentation/DocBook/device-drivers.tmpl +++ b/Documentation/DocBook/device-drivers.tmpl @@ -161,6 +161,10 @@ X!Edrivers/base/interface.c !Iinclude/linux/fence.h !Edrivers/dma-buf/seqno-fence.c !Iinclude/linux/seqno-fence.h +!Edrivers/dma-buf/fence-array.c +!Iinclude/linux/fence-array.h +!Edrivers/dma-buf/reservation.c +!Iinclude/linux/reservation.h !Edrivers/dma-buf/sync_file.c !Iinclude/linux/sync_file.h </sect2> diff --git a/Documentation/DocBook/gpu.tmpl b/Documentation/DocBook/gpu.tmpl deleted file mode 100644 index 7586bf75f62e..000000000000 --- a/Documentation/DocBook/gpu.tmpl +++ /dev/null @@ -1,3540 +0,0 @@ -<?xml version="1.0" encoding="UTF-8"?> -<!DOCTYPE book PUBLIC "-//OASIS//DTD DocBook XML V4.1.2//EN" - "http://www.oasis-open.org/docbook/xml/4.1.2/docbookx.dtd" []> - -<book id="gpuDevelopersGuide"> - <bookinfo> - <title>Linux GPU Driver Developer's Guide</title> - - <authorgroup> - <author> - <firstname>Jesse</firstname> - <surname>Barnes</surname> - <contrib>Initial version</contrib> - <affiliation> - <orgname>Intel Corporation</orgname> - <address> - <email>jesse.barnes@intel.com</email> - </address> - </affiliation> - </author> - <author> - <firstname>Laurent</firstname> - <surname>Pinchart</surname> - <contrib>Driver internals</contrib> - <affiliation> - <orgname>Ideas on board SPRL</orgname> - <address> - <email>laurent.pinchart@ideasonboard.com</email> - </address> - </affiliation> - </author> - <author> - <firstname>Daniel</firstname> - <surname>Vetter</surname> - <contrib>Contributions all over the place</contrib> - <affiliation> - <orgname>Intel Corporation</orgname> - <address> - <email>daniel.vetter@ffwll.ch</email> - </address> - </affiliation> - </author> - <author> - <firstname>Lukas</firstname> - <surname>Wunner</surname> - <contrib>vga_switcheroo documentation</contrib> - <affiliation> - <address> - <email>lukas@wunner.de</email> - </address> - </affiliation> - </author> - </authorgroup> - - <copyright> - <year>2008-2009</year> - <year>2013-2014</year> - <holder>Intel Corporation</holder> - </copyright> - <copyright> - <year>2012</year> - <holder>Laurent Pinchart</holder> - </copyright> - <copyright> - <year>2015</year> - <holder>Lukas Wunner</holder> - </copyright> - - <legalnotice> - <para> - The contents of this file may be used under the terms of the GNU - General Public License version 2 (the "GPL") as distributed in - the kernel source COPYING file. - </para> - </legalnotice> - - <revhistory> - <!-- Put document revisions here, newest first. --> - <revision> - <revnumber>1.0</revnumber> - <date>2012-07-13</date> - <authorinitials>LP</authorinitials> - <revremark>Added extensive documentation about driver internals. - </revremark> - </revision> - <revision> - <revnumber>1.1</revnumber> - <date>2015-10-11</date> - <authorinitials>LW</authorinitials> - <revremark>Added vga_switcheroo documentation. - </revremark> - </revision> - </revhistory> - </bookinfo> - -<toc></toc> - -<part id="drmCore"> - <title>DRM Core</title> - <partintro> - <para> - This first part of the GPU Driver Developer's Guide documents core DRM - code, helper libraries for writing drivers and generic userspace - interfaces exposed by DRM drivers. - </para> - </partintro> - - <chapter id="drmIntroduction"> - <title>Introduction</title> - <para> - The Linux DRM layer contains code intended to support the needs - of complex graphics devices, usually containing programmable - pipelines well suited to 3D graphics acceleration. Graphics - drivers in the kernel may make use of DRM functions to make - tasks like memory management, interrupt handling and DMA easier, - and provide a uniform interface to applications. - </para> - <para> - A note on versions: this guide covers features found in the DRM - tree, including the TTM memory manager, output configuration and - mode setting, and the new vblank internals, in addition to all - the regular features found in current kernels. - </para> - <para> - [Insert diagram of typical DRM stack here] - </para> - <sect1> - <title>Style Guidelines</title> - <para> - For consistency this documentation uses American English. Abbreviations - are written as all-uppercase, for example: DRM, KMS, IOCTL, CRTC, and so - on. To aid in reading, documentations make full use of the markup - characters kerneldoc provides: @parameter for function parameters, @member - for structure members, &structure to reference structures and - function() for functions. These all get automatically hyperlinked if - kerneldoc for the referenced objects exists. When referencing entries in - function vtables please use ->vfunc(). Note that kerneldoc does - not support referencing struct members directly, so please add a reference - to the vtable struct somewhere in the same paragraph or at least section. - </para> - <para> - Except in special situations (to separate locked from unlocked variants) - locking requirements for functions aren't documented in the kerneldoc. - Instead locking should be check at runtime using e.g. - <code>WARN_ON(!mutex_is_locked(...));</code>. Since it's much easier to - ignore documentation than runtime noise this provides more value. And on - top of that runtime checks do need to be updated when the locking rules - change, increasing the chances that they're correct. Within the - documentation the locking rules should be explained in the relevant - structures: Either in the comment for the lock explaining what it - protects, or data fields need a note about which lock protects them, or - both. - </para> - <para> - Functions which have a non-<code>void</code> return value should have a - section called "Returns" explaining the expected return values in - different cases and their meanings. Currently there's no consensus whether - that section name should be all upper-case or not, and whether it should - end in a colon or not. Go with the file-local style. Other common section - names are "Notes" with information for dangerous or tricky corner cases, - and "FIXME" where the interface could be cleaned up. - </para> - </sect1> - </chapter> - - <!-- Internals --> - - <chapter id="drmInternals"> - <title>DRM Internals</title> - <para> - This chapter documents DRM internals relevant to driver authors - and developers working to add support for the latest features to - existing drivers. - </para> - <para> - First, we go over some typical driver initialization - requirements, like setting up command buffers, creating an - initial output configuration, and initializing core services. - Subsequent sections cover core internals in more detail, - providing implementation notes and examples. - </para> - <para> - The DRM layer provides several services to graphics drivers, - many of them driven by the application interfaces it provides - through libdrm, the library that wraps most of the DRM ioctls. - These include vblank event handling, memory - management, output management, framebuffer management, command - submission & fencing, suspend/resume support, and DMA - services. - </para> - - <!-- Internals: driver init --> - - <sect1> - <title>Driver Initialization</title> - <para> - At the core of every DRM driver is a <structname>drm_driver</structname> - structure. Drivers typically statically initialize a drm_driver structure, - and then pass it to <function>drm_dev_alloc()</function> to allocate a - device instance. After the device instance is fully initialized it can be - registered (which makes it accessible from userspace) using - <function>drm_dev_register()</function>. - </para> - <para> - The <structname>drm_driver</structname> structure contains static - information that describes the driver and features it supports, and - pointers to methods that the DRM core will call to implement the DRM API. - We will first go through the <structname>drm_driver</structname> static - information fields, and will then describe individual operations in - details as they get used in later sections. - </para> - <sect2> - <title>Driver Information</title> - <sect3> - <title>Driver Features</title> - <para> - Drivers inform the DRM core about their requirements and supported - features by setting appropriate flags in the - <structfield>driver_features</structfield> field. Since those flags - influence the DRM core behaviour since registration time, most of them - must be set to registering the <structname>drm_driver</structname> - instance. - </para> - <synopsis>u32 driver_features;</synopsis> - <variablelist> - <title>Driver Feature Flags</title> - <varlistentry> - <term>DRIVER_USE_AGP</term> - <listitem><para> - Driver uses AGP interface, the DRM core will manage AGP resources. - </para></listitem> - </varlistentry> - <varlistentry> - <term>DRIVER_REQUIRE_AGP</term> - <listitem><para> - Driver needs AGP interface to function. AGP initialization failure - will become a fatal error. - </para></listitem> - </varlistentry> - <varlistentry> - <term>DRIVER_PCI_DMA</term> - <listitem><para> - Driver is capable of PCI DMA, mapping of PCI DMA buffers to - userspace will be enabled. Deprecated. - </para></listitem> - </varlistentry> - <varlistentry> - <term>DRIVER_SG</term> - <listitem><para> - Driver can perform scatter/gather DMA, allocation and mapping of - scatter/gather buffers will be enabled. Deprecated. - </para></listitem> - </varlistentry> - <varlistentry> - <term>DRIVER_HAVE_DMA</term> - <listitem><para> - Driver supports DMA, the userspace DMA API will be supported. - Deprecated. - </para></listitem> - </varlistentry> - <varlistentry> - <term>DRIVER_HAVE_IRQ</term><term>DRIVER_IRQ_SHARED</term> - <listitem><para> - DRIVER_HAVE_IRQ indicates whether the driver has an IRQ handler - managed by the DRM Core. The core will support simple IRQ handler - installation when the flag is set. The installation process is - described in <xref linkend="drm-irq-registration"/>.</para> - <para>DRIVER_IRQ_SHARED indicates whether the device & handler - support shared IRQs (note that this is required of PCI drivers). - </para></listitem> - </varlistentry> - <varlistentry> - <term>DRIVER_GEM</term> - <listitem><para> - Driver use the GEM memory manager. - </para></listitem> - </varlistentry> - <varlistentry> - <term>DRIVER_MODESET</term> - <listitem><para> - Driver supports mode setting interfaces (KMS). - </para></listitem> - </varlistentry> - <varlistentry> - <term>DRIVER_PRIME</term> - <listitem><para> - Driver implements DRM PRIME buffer sharing. - </para></listitem> - </varlistentry> - <varlistentry> - <term>DRIVER_RENDER</term> - <listitem><para> - Driver supports dedicated render nodes. - </para></listitem> - </varlistentry> - <varlistentry> - <term>DRIVER_ATOMIC</term> - <listitem><para> - Driver supports atomic properties. In this case the driver - must implement appropriate obj->atomic_get_property() vfuncs - for any modeset objects with driver specific properties. - </para></listitem> - </varlistentry> - </variablelist> - </sect3> - <sect3> - <title>Major, Minor and Patchlevel</title> - <synopsis>int major; -int minor; -int patchlevel;</synopsis> - <para> - The DRM core identifies driver versions by a major, minor and patch - level triplet. The information is printed to the kernel log at - initialization time and passed to userspace through the - DRM_IOCTL_VERSION ioctl. - </para> - <para> - The major and minor numbers are also used to verify the requested driver - API version passed to DRM_IOCTL_SET_VERSION. When the driver API changes - between minor versions, applications can call DRM_IOCTL_SET_VERSION to - select a specific version of the API. If the requested major isn't equal - to the driver major, or the requested minor is larger than the driver - minor, the DRM_IOCTL_SET_VERSION call will return an error. Otherwise - the driver's set_version() method will be called with the requested - version. - </para> - </sect3> - <sect3> - <title>Name, Description and Date</title> - <synopsis>char *name; -char *desc; -char *date;</synopsis> - <para> - The driver name is printed to the kernel log at initialization time, - used for IRQ registration and passed to userspace through - DRM_IOCTL_VERSION. - </para> - <para> - The driver description is a purely informative string passed to - userspace through the DRM_IOCTL_VERSION ioctl and otherwise unused by - the kernel. - </para> - <para> - The driver date, formatted as YYYYMMDD, is meant to identify the date of - the latest modification to the driver. However, as most drivers fail to - update it, its value is mostly useless. The DRM core prints it to the - kernel log at initialization time and passes it to userspace through the - DRM_IOCTL_VERSION ioctl. - </para> - </sect3> - </sect2> - <sect2> - <title>Device Instance and Driver Handling</title> -!Pdrivers/gpu/drm/drm_drv.c driver instance overview -!Edrivers/gpu/drm/drm_drv.c - </sect2> - <sect2> - <title>Driver Load</title> - <sect3 id="drm-irq-registration"> - <title>IRQ Registration</title> - <para> - The DRM core tries to facilitate IRQ handler registration and - unregistration by providing <function>drm_irq_install</function> and - <function>drm_irq_uninstall</function> functions. Those functions only - support a single interrupt per device, devices that use more than one - IRQs need to be handled manually. - </para> - <sect4> - <title>Managed IRQ Registration</title> - <para> - <function>drm_irq_install</function> starts by calling the - <methodname>irq_preinstall</methodname> driver operation. The operation - is optional and must make sure that the interrupt will not get fired by - clearing all pending interrupt flags or disabling the interrupt. - </para> - <para> - The passed-in IRQ will then be requested by a call to - <function>request_irq</function>. If the DRIVER_IRQ_SHARED driver - feature flag is set, a shared (IRQF_SHARED) IRQ handler will be - requested. - </para> - <para> - The IRQ handler function must be provided as the mandatory irq_handler - driver operation. It will get passed directly to - <function>request_irq</function> and thus has the same prototype as all - IRQ handlers. It will get called with a pointer to the DRM device as the - second argument. - </para> - <para> - Finally the function calls the optional - <methodname>irq_postinstall</methodname> driver operation. The operation - usually enables interrupts (excluding the vblank interrupt, which is - enabled separately), but drivers may choose to enable/disable interrupts - at a different time. - </para> - <para> - <function>drm_irq_uninstall</function> is similarly used to uninstall an - IRQ handler. It starts by waking up all processes waiting on a vblank - interrupt to make sure they don't hang, and then calls the optional - <methodname>irq_uninstall</methodname> driver operation. The operation - must disable all hardware interrupts. Finally the function frees the IRQ - by calling <function>free_irq</function>. - </para> - </sect4> - <sect4> - <title>Manual IRQ Registration</title> - <para> - Drivers that require multiple interrupt handlers can't use the managed - IRQ registration functions. In that case IRQs must be registered and - unregistered manually (usually with the <function>request_irq</function> - and <function>free_irq</function> functions, or their devm_* equivalent). - </para> - <para> - When manually registering IRQs, drivers must not set the DRIVER_HAVE_IRQ - driver feature flag, and must not provide the - <methodname>irq_handler</methodname> driver operation. They must set the - <structname>drm_device</structname> <structfield>irq_enabled</structfield> - field to 1 upon registration of the IRQs, and clear it to 0 after - unregistering the IRQs. - </para> - </sect4> - </sect3> - <sect3> - <title>Memory Manager Initialization</title> - <para> - Every DRM driver requires a memory manager which must be initialized at - load time. DRM currently contains two memory managers, the Translation - Table Manager (TTM) and the Graphics Execution Manager (GEM). - This document describes the use of the GEM memory manager only. See - <xref linkend="drm-memory-management"/> for details. - </para> - </sect3> - <sect3> - <title>Miscellaneous Device Configuration</title> - <para> - Another task that may be necessary for PCI devices during configuration - is mapping the video BIOS. On many devices, the VBIOS describes device - configuration, LCD panel timings (if any), and contains flags indicating - device state. Mapping the BIOS can be done using the pci_map_rom() call, - a convenience function that takes care of mapping the actual ROM, - whether it has been shadowed into memory (typically at address 0xc0000) - or exists on the PCI device in the ROM BAR. Note that after the ROM has - been mapped and any necessary information has been extracted, it should - be unmapped; on many devices, the ROM address decoder is shared with - other BARs, so leaving it mapped could cause undesired behaviour like - hangs or memory corruption. - <!--!Fdrivers/pci/rom.c pci_map_rom--> - </para> - </sect3> - </sect2> - <sect2> - <title>Bus-specific Device Registration and PCI Support</title> - <para> - A number of functions are provided to help with device registration. - The functions deal with PCI and platform devices respectively and are - only provided for historical reasons. These are all deprecated and - shouldn't be used in new drivers. Besides that there's a few - helpers for pci drivers. - </para> -!Edrivers/gpu/drm/drm_pci.c -!Edrivers/gpu/drm/drm_platform.c - </sect2> - </sect1> - - <!-- Internals: memory management --> - - <sect1 id="drm-memory-management"> - <title>Memory management</title> - <para> - Modern Linux systems require large amount of graphics memory to store - frame buffers, textures, vertices and other graphics-related data. Given - the very dynamic nature of many of that data, managing graphics memory - efficiently is thus crucial for the graphics stack and plays a central - role in the DRM infrastructure. - </para> - <para> - The DRM core includes two memory managers, namely Translation Table Maps - (TTM) and Graphics Execution Manager (GEM). TTM was the first DRM memory - manager to be developed and tried to be a one-size-fits-them all - solution. It provides a single userspace API to accommodate the need of - all hardware, supporting both Unified Memory Architecture (UMA) devices - and devices with dedicated video RAM (i.e. most discrete video cards). - This resulted in a large, complex piece of code that turned out to be - hard to use for driver development. - </para> - <para> - GEM started as an Intel-sponsored project in reaction to TTM's - complexity. Its design philosophy is completely different: instead of - providing a solution to every graphics memory-related problems, GEM - identified common code between drivers and created a support library to - share it. GEM has simpler initialization and execution requirements than - TTM, but has no video RAM management capabilities and is thus limited to - UMA devices. - </para> - <sect2> - <title>The Translation Table Manager (TTM)</title> - <para> - TTM design background and information belongs here. - </para> - <sect3> - <title>TTM initialization</title> - <warning><para>This section is outdated.</para></warning> - <para> - Drivers wishing to support TTM must fill out a drm_bo_driver - structure. The structure contains several fields with function - pointers for initializing the TTM, allocating and freeing memory, - waiting for command completion and fence synchronization, and memory - migration. See the radeon_ttm.c file for an example of usage. - </para> - <para> - The ttm_global_reference structure is made up of several fields: - </para> - <programlisting> - struct ttm_global_reference { - enum ttm_global_types global_type; - size_t size; - void *object; - int (*init) (struct ttm_global_reference *); - void (*release) (struct ttm_global_reference *); - }; - </programlisting> - <para> - There should be one global reference structure for your memory - manager as a whole, and there will be others for each object - created by the memory manager at runtime. Your global TTM should - have a type of TTM_GLOBAL_TTM_MEM. The size field for the global - object should be sizeof(struct ttm_mem_global), and the init and - release hooks should point at your driver-specific init and - release routines, which probably eventually call - ttm_mem_global_init and ttm_mem_global_release, respectively. - </para> - <para> - Once your global TTM accounting structure is set up and initialized - by calling ttm_global_item_ref() on it, - you need to create a buffer object TTM to - provide a pool for buffer object allocation by clients and the - kernel itself. The type of this object should be TTM_GLOBAL_TTM_BO, - and its size should be sizeof(struct ttm_bo_global). Again, - driver-specific init and release functions may be provided, - likely eventually calling ttm_bo_global_init() and - ttm_bo_global_release(), respectively. Also, like the previous - object, ttm_global_item_ref() is used to create an initial reference - count for the TTM, which will call your initialization function. - </para> - </sect3> - </sect2> - <sect2 id="drm-gem"> - <title>The Graphics Execution Manager (GEM)</title> - <para> - The GEM design approach has resulted in a memory manager that doesn't - provide full coverage of all (or even all common) use cases in its - userspace or kernel API. GEM exposes a set of standard memory-related - operations to userspace and a set of helper functions to drivers, and let - drivers implement hardware-specific operations with their own private API. - </para> - <para> - The GEM userspace API is described in the - <ulink url="http://lwn.net/Articles/283798/"><citetitle>GEM - the Graphics - Execution Manager</citetitle></ulink> article on LWN. While slightly - outdated, the document provides a good overview of the GEM API principles. - Buffer allocation and read and write operations, described as part of the - common GEM API, are currently implemented using driver-specific ioctls. - </para> - <para> - GEM is data-agnostic. It manages abstract buffer objects without knowing - what individual buffers contain. APIs that require knowledge of buffer - contents or purpose, such as buffer allocation or synchronization - primitives, are thus outside of the scope of GEM and must be implemented - using driver-specific ioctls. - </para> - <para> - On a fundamental level, GEM involves several operations: - <itemizedlist> - <listitem>Memory allocation and freeing</listitem> - <listitem>Command execution</listitem> - <listitem>Aperture management at command execution time</listitem> - </itemizedlist> - Buffer object allocation is relatively straightforward and largely - provided by Linux's shmem layer, which provides memory to back each - object. - </para> - <para> - Device-specific operations, such as command execution, pinning, buffer - read & write, mapping, and domain ownership transfers are left to - driver-specific ioctls. - </para> - <sect3> - <title>GEM Initialization</title> - <para> - Drivers that use GEM must set the DRIVER_GEM bit in the struct - <structname>drm_driver</structname> - <structfield>driver_features</structfield> field. The DRM core will - then automatically initialize the GEM core before calling the - <methodname>load</methodname> operation. Behind the scene, this will - create a DRM Memory Manager object which provides an address space - pool for object allocation. - </para> - <para> - In a KMS configuration, drivers need to allocate and initialize a - command ring buffer following core GEM initialization if required by - the hardware. UMA devices usually have what is called a "stolen" - memory region, which provides space for the initial framebuffer and - large, contiguous memory regions required by the device. This space is - typically not managed by GEM, and must be initialized separately into - its own DRM MM object. - </para> - </sect3> - <sect3> - <title>GEM Objects Creation</title> - <para> - GEM splits creation of GEM objects and allocation of the memory that - backs them in two distinct operations. - </para> - <para> - GEM objects are represented by an instance of struct - <structname>drm_gem_object</structname>. Drivers usually need to extend - GEM objects with private information and thus create a driver-specific - GEM object structure type that embeds an instance of struct - <structname>drm_gem_object</structname>. - </para> - <para> - To create a GEM object, a driver allocates memory for an instance of its - specific GEM object type and initializes the embedded struct - <structname>drm_gem_object</structname> with a call to - <function>drm_gem_object_init</function>. The function takes a pointer to - the DRM device, a pointer to the GEM object and the buffer object size - in bytes. - </para> - <para> - GEM uses shmem to allocate anonymous pageable memory. - <function>drm_gem_object_init</function> will create an shmfs file of - the requested size and store it into the struct - <structname>drm_gem_object</structname> <structfield>filp</structfield> - field. The memory is used as either main storage for the object when the - graphics hardware uses system memory directly or as a backing store - otherwise. - </para> - <para> - Drivers are responsible for the actual physical pages allocation by - calling <function>shmem_read_mapping_page_gfp</function> for each page. - Note that they can decide to allocate pages when initializing the GEM - object, or to delay allocation until the memory is needed (for instance - when a page fault occurs as a result of a userspace memory access or - when the driver needs to start a DMA transfer involving the memory). - </para> - <para> - Anonymous pageable memory allocation is not always desired, for instance - when the hardware requires physically contiguous system memory as is - often the case in embedded devices. Drivers can create GEM objects with - no shmfs backing (called private GEM objects) by initializing them with - a call to <function>drm_gem_private_object_init</function> instead of - <function>drm_gem_object_init</function>. Storage for private GEM - objects must be managed by drivers. - </para> - </sect3> - <sect3> - <title>GEM Objects Lifetime</title> - <para> - All GEM objects are reference-counted by the GEM core. References can be - acquired and release by <function>calling drm_gem_object_reference</function> - and <function>drm_gem_object_unreference</function> respectively. The - caller must hold the <structname>drm_device</structname> - <structfield>struct_mutex</structfield> lock when calling - <function>drm_gem_object_reference</function>. As a convenience, GEM - provides <function>drm_gem_object_unreference_unlocked</function> - functions that can be called without holding the lock. - </para> - <para> - When the last reference to a GEM object is released the GEM core calls - the <structname>drm_driver</structname> - <methodname>gem_free_object</methodname> operation. That operation is - mandatory for GEM-enabled drivers and must free the GEM object and all - associated resources. - </para> - <para> - <synopsis>void (*gem_free_object) (struct drm_gem_object *obj);</synopsis> - Drivers are responsible for freeing all GEM object resources. This includes - the resources created by the GEM core, which need to be released with - <function>drm_gem_object_release</function>. - </para> - </sect3> - <sect3> - <title>GEM Objects Naming</title> - <para> - Communication between userspace and the kernel refers to GEM objects - using local handles, global names or, more recently, file descriptors. - All of those are 32-bit integer values; the usual Linux kernel limits - apply to the file descriptors. - </para> - <para> - GEM handles are local to a DRM file. Applications get a handle to a GEM - object through a driver-specific ioctl, and can use that handle to refer - to the GEM object in other standard or driver-specific ioctls. Closing a - DRM file handle frees all its GEM handles and dereferences the - associated GEM objects. - </para> - <para> - To create a handle for a GEM object drivers call - <function>drm_gem_handle_create</function>. The function takes a pointer - to the DRM file and the GEM object and returns a locally unique handle. - When the handle is no longer needed drivers delete it with a call to - <function>drm_gem_handle_delete</function>. Finally the GEM object - associated with a handle can be retrieved by a call to - <function>drm_gem_object_lookup</function>. - </para> - <para> - Handles don't take ownership of GEM objects, they only take a reference - to the object that will be dropped when the handle is destroyed. To - avoid leaking GEM objects, drivers must make sure they drop the - reference(s) they own (such as the initial reference taken at object - creation time) as appropriate, without any special consideration for the - handle. For example, in the particular case of combined GEM object and - handle creation in the implementation of the - <methodname>dumb_create</methodname> operation, drivers must drop the - initial reference to the GEM object before returning the handle. - </para> - <para> - GEM names are similar in purpose to handles but are not local to DRM - files. They can be passed between processes to reference a GEM object - globally. Names can't be used directly to refer to objects in the DRM - API, applications must convert handles to names and names to handles - using the DRM_IOCTL_GEM_FLINK and DRM_IOCTL_GEM_OPEN ioctls - respectively. The conversion is handled by the DRM core without any - driver-specific support. - </para> - <para> - GEM also supports buffer sharing with dma-buf file descriptors through - PRIME. GEM-based drivers must use the provided helpers functions to - implement the exporting and importing correctly. See <xref linkend="drm-prime-support" />. - Since sharing file descriptors is inherently more secure than the - easily guessable and global GEM names it is the preferred buffer - sharing mechanism. Sharing buffers through GEM names is only supported - for legacy userspace. Furthermore PRIME also allows cross-device - buffer sharing since it is based on dma-bufs. - </para> - </sect3> - <sect3 id="drm-gem-objects-mapping"> - <title>GEM Objects Mapping</title> - <para> - Because mapping operations are fairly heavyweight GEM favours - read/write-like access to buffers, implemented through driver-specific - ioctls, over mapping buffers to userspace. However, when random access - to the buffer is needed (to perform software rendering for instance), - direct access to the object can be more efficient. - </para> - <para> - The mmap system call can't be used directly to map GEM objects, as they - don't have their own file handle. Two alternative methods currently - co-exist to map GEM objects to userspace. The first method uses a - driver-specific ioctl to perform the mapping operation, calling - <function>do_mmap</function> under the hood. This is often considered - dubious, seems to be discouraged for new GEM-enabled drivers, and will - thus not be described here. - </para> - <para> - The second method uses the mmap system call on the DRM file handle. - <synopsis>void *mmap(void *addr, size_t length, int prot, int flags, int fd, - off_t offset);</synopsis> - DRM identifies the GEM object to be mapped by a fake offset passed - through the mmap offset argument. Prior to being mapped, a GEM object - must thus be associated with a fake offset. To do so, drivers must call - <function>drm_gem_create_mmap_offset</function> on the object. - </para> - <para> - Once allocated, the fake offset value - must be passed to the application in a driver-specific way and can then - be used as the mmap offset argument. - </para> - <para> - The GEM core provides a helper method <function>drm_gem_mmap</function> - to handle object mapping. The method can be set directly as the mmap - file operation handler. It will look up the GEM object based on the - offset value and set the VMA operations to the - <structname>drm_driver</structname> <structfield>gem_vm_ops</structfield> - field. Note that <function>drm_gem_mmap</function> doesn't map memory to - userspace, but relies on the driver-provided fault handler to map pages - individually. - </para> - <para> - To use <function>drm_gem_mmap</function>, drivers must fill the struct - <structname>drm_driver</structname> <structfield>gem_vm_ops</structfield> - field with a pointer to VM operations. - </para> - <para> - <synopsis>struct vm_operations_struct *gem_vm_ops - - struct vm_operations_struct { - void (*open)(struct vm_area_struct * area); - void (*close)(struct vm_area_struct * area); - int (*fault)(struct vm_area_struct *vma, struct vm_fault *vmf); - };</synopsis> - </para> - <para> - The <methodname>open</methodname> and <methodname>close</methodname> - operations must update the GEM object reference count. Drivers can use - the <function>drm_gem_vm_open</function> and - <function>drm_gem_vm_close</function> helper functions directly as open - and close handlers. - </para> - <para> - The fault operation handler is responsible for mapping individual pages - to userspace when a page fault occurs. Depending on the memory - allocation scheme, drivers can allocate pages at fault time, or can - decide to allocate memory for the GEM object at the time the object is - created. - </para> - <para> - Drivers that want to map the GEM object upfront instead of handling page - faults can implement their own mmap file operation handler. - </para> - </sect3> - <sect3> - <title>Memory Coherency</title> - <para> - When mapped to the device or used in a command buffer, backing pages - for an object are flushed to memory and marked write combined so as to - be coherent with the GPU. Likewise, if the CPU accesses an object - after the GPU has finished rendering to the object, then the object - must be made coherent with the CPU's view of memory, usually involving - GPU cache flushing of various kinds. This core CPU<->GPU - coherency management is provided by a device-specific ioctl, which - evaluates an object's current domain and performs any necessary - flushing or synchronization to put the object into the desired - coherency domain (note that the object may be busy, i.e. an active - render target; in that case, setting the domain blocks the client and - waits for rendering to complete before performing any necessary - flushing operations). - </para> - </sect3> - <sect3> - <title>Command Execution</title> - <para> - Perhaps the most important GEM function for GPU devices is providing a - command execution interface to clients. Client programs construct - command buffers containing references to previously allocated memory - objects, and then submit them to GEM. At that point, GEM takes care to - bind all the objects into the GTT, execute the buffer, and provide - necessary synchronization between clients accessing the same buffers. - This often involves evicting some objects from the GTT and re-binding - others (a fairly expensive operation), and providing relocation - support which hides fixed GTT offsets from clients. Clients must take - care not to submit command buffers that reference more objects than - can fit in the GTT; otherwise, GEM will reject them and no rendering - will occur. Similarly, if several objects in the buffer require fence - registers to be allocated for correct rendering (e.g. 2D blits on - pre-965 chips), care must be taken not to require more fence registers - than are available to the client. Such resource management should be - abstracted from the client in libdrm. - </para> - </sect3> - </sect2> - <sect2> - <title>GEM Function Reference</title> -!Edrivers/gpu/drm/drm_gem.c -!Iinclude/drm/drm_gem.h - </sect2> - <sect2> - <title>VMA Offset Manager</title> -!Pdrivers/gpu/drm/drm_vma_manager.c vma offset manager -!Edrivers/gpu/drm/drm_vma_manager.c -!Iinclude/drm/drm_vma_manager.h - </sect2> - <sect2 id="drm-prime-support"> - <title>PRIME Buffer Sharing</title> - <para> - PRIME is the cross device buffer sharing framework in drm, originally - created for the OPTIMUS range of multi-gpu platforms. To userspace - PRIME buffers are dma-buf based file descriptors. - </para> - <sect3> - <title>Overview and Driver Interface</title> - <para> - Similar to GEM global names, PRIME file descriptors are - also used to share buffer objects across processes. They offer - additional security: as file descriptors must be explicitly sent over - UNIX domain sockets to be shared between applications, they can't be - guessed like the globally unique GEM names. - </para> - <para> - Drivers that support the PRIME - API must set the DRIVER_PRIME bit in the struct - <structname>drm_driver</structname> - <structfield>driver_features</structfield> field, and implement the - <methodname>prime_handle_to_fd</methodname> and - <methodname>prime_fd_to_handle</methodname> operations. - </para> - <para> - <synopsis>int (*prime_handle_to_fd)(struct drm_device *dev, - struct drm_file *file_priv, uint32_t handle, - uint32_t flags, int *prime_fd); -int (*prime_fd_to_handle)(struct drm_device *dev, - struct drm_file *file_priv, int prime_fd, - uint32_t *handle);</synopsis> - Those two operations convert a handle to a PRIME file descriptor and - vice versa. Drivers must use the kernel dma-buf buffer sharing framework - to manage the PRIME file descriptors. Similar to the mode setting - API PRIME is agnostic to the underlying buffer object manager, as - long as handles are 32bit unsigned integers. - </para> - <para> - While non-GEM drivers must implement the operations themselves, GEM - drivers must use the <function>drm_gem_prime_handle_to_fd</function> - and <function>drm_gem_prime_fd_to_handle</function> helper functions. - Those helpers rely on the driver - <methodname>gem_prime_export</methodname> and - <methodname>gem_prime_import</methodname> operations to create a dma-buf - instance from a GEM object (dma-buf exporter role) and to create a GEM - object from a dma-buf instance (dma-buf importer role). - </para> - <para> - <synopsis>struct dma_buf * (*gem_prime_export)(struct drm_device *dev, - struct drm_gem_object *obj, - int flags); -struct drm_gem_object * (*gem_prime_import)(struct drm_device *dev, - struct dma_buf *dma_buf);</synopsis> - These two operations are mandatory for GEM drivers that support - PRIME. - </para> - </sect3> - <sect3> - <title>PRIME Helper Functions</title> -!Pdrivers/gpu/drm/drm_prime.c PRIME Helpers - </sect3> - </sect2> - <sect2> - <title>PRIME Function References</title> -!Edrivers/gpu/drm/drm_prime.c - </sect2> - <sect2> - <title>DRM MM Range Allocator</title> - <sect3> - <title>Overview</title> -!Pdrivers/gpu/drm/drm_mm.c Overview - </sect3> - <sect3> - <title>LRU Scan/Eviction Support</title> -!Pdrivers/gpu/drm/drm_mm.c lru scan roaster - </sect3> - </sect2> - <sect2> - <title>DRM MM Range Allocator Function References</title> -!Edrivers/gpu/drm/drm_mm.c -!Iinclude/drm/drm_mm.h - </sect2> - <sect2> - <title>CMA Helper Functions Reference</title> -!Pdrivers/gpu/drm/drm_gem_cma_helper.c cma helpers -!Edrivers/gpu/drm/drm_gem_cma_helper.c -!Iinclude/drm/drm_gem_cma_helper.h - </sect2> - </sect1> - - <!-- Internals: mode setting --> - - <sect1 id="drm-mode-setting"> - <title>Mode Setting</title> - <para> - Drivers must initialize the mode setting core by calling - <function>drm_mode_config_init</function> on the DRM device. The function - initializes the <structname>drm_device</structname> - <structfield>mode_config</structfield> field and never fails. Once done, - mode configuration must be setup by initializing the following fields. - </para> - <itemizedlist> - <listitem> - <synopsis>int min_width, min_height; -int max_width, max_height;</synopsis> - <para> - Minimum and maximum width and height of the frame buffers in pixel - units. - </para> - </listitem> - <listitem> - <synopsis>struct drm_mode_config_funcs *funcs;</synopsis> - <para>Mode setting functions.</para> - </listitem> - </itemizedlist> - <sect2> - <title>Display Modes Function Reference</title> -!Iinclude/drm/drm_modes.h -!Edrivers/gpu/drm/drm_modes.c - </sect2> - <sect2> - <title>Atomic Mode Setting Function Reference</title> -!Edrivers/gpu/drm/drm_atomic.c -!Idrivers/gpu/drm/drm_atomic.c - </sect2> - <sect2> - <title>Frame Buffer Abstraction</title> - <para> - Frame buffers are abstract memory objects that provide a source of - pixels to scanout to a CRTC. Applications explicitly request the - creation of frame buffers through the DRM_IOCTL_MODE_ADDFB(2) ioctls and - receive an opaque handle that can be passed to the KMS CRTC control, - plane configuration and page flip functions. - </para> - <para> - Frame buffers rely on the underneath memory manager for low-level memory - operations. When creating a frame buffer applications pass a memory - handle (or a list of memory handles for multi-planar formats) through - the <parameter>drm_mode_fb_cmd2</parameter> argument. For drivers using - GEM as their userspace buffer management interface this would be a GEM - handle. Drivers are however free to use their own backing storage object - handles, e.g. vmwgfx directly exposes special TTM handles to userspace - and so expects TTM handles in the create ioctl and not GEM handles. - </para> - <para> - The lifetime of a drm framebuffer is controlled with a reference count, - drivers can grab additional references with - <function>drm_framebuffer_reference</function>and drop them - again with <function>drm_framebuffer_unreference</function>. For - driver-private framebuffers for which the last reference is never - dropped (e.g. for the fbdev framebuffer when the struct - <structname>drm_framebuffer</structname> is embedded into the fbdev - helper struct) drivers can manually clean up a framebuffer at module - unload time with - <function>drm_framebuffer_unregister_private</function>. - </para> - </sect2> - <sect2> - <title>Dumb Buffer Objects</title> - <para> - The KMS API doesn't standardize backing storage object creation and - leaves it to driver-specific ioctls. Furthermore actually creating a - buffer object even for GEM-based drivers is done through a - driver-specific ioctl - GEM only has a common userspace interface for - sharing and destroying objects. While not an issue for full-fledged - graphics stacks that include device-specific userspace components (in - libdrm for instance), this limit makes DRM-based early boot graphics - unnecessarily complex. - </para> - <para> - Dumb objects partly alleviate the problem by providing a standard - API to create dumb buffers suitable for scanout, which can then be used - to create KMS frame buffers. - </para> - <para> - To support dumb objects drivers must implement the - <methodname>dumb_create</methodname>, - <methodname>dumb_destroy</methodname> and - <methodname>dumb_map_offset</methodname> operations. - </para> - <itemizedlist> - <listitem> - <synopsis>int (*dumb_create)(struct drm_file *file_priv, struct drm_device *dev, - struct drm_mode_create_dumb *args);</synopsis> - <para> - The <methodname>dumb_create</methodname> operation creates a driver - object (GEM or TTM handle) suitable for scanout based on the - width, height and depth from the struct - <structname>drm_mode_create_dumb</structname> argument. It fills the - argument's <structfield>handle</structfield>, - <structfield>pitch</structfield> and <structfield>size</structfield> - fields with a handle for the newly created object and its line - pitch and size in bytes. - </para> - </listitem> - <listitem> - <synopsis>int (*dumb_destroy)(struct drm_file *file_priv, struct drm_device *dev, - uint32_t handle);</synopsis> - <para> - The <methodname>dumb_destroy</methodname> operation destroys a dumb - object created by <methodname>dumb_create</methodname>. - </para> - </listitem> - <listitem> - <synopsis>int (*dumb_map_offset)(struct drm_file *file_priv, struct drm_device *dev, - uint32_t handle, uint64_t *offset);</synopsis> - <para> - The <methodname>dumb_map_offset</methodname> operation associates an - mmap fake offset with the object given by the handle and returns - it. Drivers must use the - <function>drm_gem_create_mmap_offset</function> function to - associate the fake offset as described in - <xref linkend="drm-gem-objects-mapping"/>. - </para> - </listitem> - </itemizedlist> - <para> - Note that dumb objects may not be used for gpu acceleration, as has been - attempted on some ARM embedded platforms. Such drivers really must have - a hardware-specific ioctl to allocate suitable buffer objects. - </para> - </sect2> - <sect2> - <title>Output Polling</title> - <synopsis>void (*output_poll_changed)(struct drm_device *dev);</synopsis> - <para> - This operation notifies the driver that the status of one or more - connectors has changed. Drivers that use the fb helper can just call the - <function>drm_fb_helper_hotplug_event</function> function to handle this - operation. - </para> - </sect2> - <sect2> - <title>Locking</title> - <para> - Beside some lookup structures with their own locking (which is hidden - behind the interface functions) most of the modeset state is protected - by the <code>dev-<mode_config.lock</code> mutex and additionally - per-crtc locks to allow cursor updates, pageflips and similar operations - to occur concurrently with background tasks like output detection. - Operations which cross domains like a full modeset always grab all - locks. Drivers there need to protect resources shared between crtcs with - additional locking. They also need to be careful to always grab the - relevant crtc locks if a modset functions touches crtc state, e.g. for - load detection (which does only grab the <code>mode_config.lock</code> - to allow concurrent screen updates on live crtcs). - </para> - </sect2> - </sect1> - - <!-- Internals: kms initialization and cleanup --> - - <sect1 id="drm-kms-init"> - <title>KMS Initialization and Cleanup</title> - <para> - A KMS device is abstracted and exposed as a set of planes, CRTCs, encoders - and connectors. KMS drivers must thus create and initialize all those - objects at load time after initializing mode setting. - </para> - <sect2> - <title>CRTCs (struct <structname>drm_crtc</structname>)</title> - <para> - A CRTC is an abstraction representing a part of the chip that contains a - pointer to a scanout buffer. Therefore, the number of CRTCs available - determines how many independent scanout buffers can be active at any - given time. The CRTC structure contains several fields to support this: - a pointer to some video memory (abstracted as a frame buffer object), a - display mode, and an (x, y) offset into the video memory to support - panning or configurations where one piece of video memory spans multiple - CRTCs. - </para> - <sect3> - <title>CRTC Initialization</title> - <para> - A KMS device must create and register at least one struct - <structname>drm_crtc</structname> instance. The instance is allocated - and zeroed by the driver, possibly as part of a larger structure, and - registered with a call to <function>drm_crtc_init</function> with a - pointer to CRTC functions. - </para> - </sect3> - </sect2> - <sect2> - <title>Planes (struct <structname>drm_plane</structname>)</title> - <para> - A plane represents an image source that can be blended with or overlayed - on top of a CRTC during the scanout process. Planes are associated with - a frame buffer to crop a portion of the image memory (source) and - optionally scale it to a destination size. The result is then blended - with or overlayed on top of a CRTC. - </para> - <para> - The DRM core recognizes three types of planes: - <itemizedlist> - <listitem> - DRM_PLANE_TYPE_PRIMARY represents a "main" plane for a CRTC. Primary - planes are the planes operated upon by CRTC modesetting and flipping - operations described in the page_flip hook in <structname>drm_crtc_funcs</structname>. - </listitem> - <listitem> - DRM_PLANE_TYPE_CURSOR represents a "cursor" plane for a CRTC. Cursor - planes are the planes operated upon by the DRM_IOCTL_MODE_CURSOR and - DRM_IOCTL_MODE_CURSOR2 ioctls. - </listitem> - <listitem> - DRM_PLANE_TYPE_OVERLAY represents all non-primary, non-cursor planes. - Some drivers refer to these types of planes as "sprites" internally. - </listitem> - </itemizedlist> - For compatibility with legacy userspace, only overlay planes are made - available to userspace by default. Userspace clients may set the - DRM_CLIENT_CAP_UNIVERSAL_PLANES client capability bit to indicate that - they wish to receive a universal plane list containing all plane types. - </para> - <sect3> - <title>Plane Initialization</title> - <para> - To create a plane, a KMS drivers allocates and - zeroes an instances of struct <structname>drm_plane</structname> - (possibly as part of a larger structure) and registers it with a call - to <function>drm_universal_plane_init</function>. The function takes a bitmask - of the CRTCs that can be associated with the plane, a pointer to the - plane functions, a list of format supported formats, and the type of - plane (primary, cursor, or overlay) being initialized. - </para> - <para> - Cursor and overlay planes are optional. All drivers should provide - one primary plane per CRTC (although this requirement may change in - the future); drivers that do not wish to provide special handling for - primary planes may make use of the helper functions described in - <xref linkend="drm-kms-planehelpers"/> to create and register a - primary plane with standard capabilities. - </para> - </sect3> - </sect2> - <sect2> - <title>Encoders (struct <structname>drm_encoder</structname>)</title> - <para> - An encoder takes pixel data from a CRTC and converts it to a format - suitable for any attached connectors. On some devices, it may be - possible to have a CRTC send data to more than one encoder. In that - case, both encoders would receive data from the same scanout buffer, - resulting in a "cloned" display configuration across the connectors - attached to each encoder. - </para> - <sect3> - <title>Encoder Initialization</title> - <para> - As for CRTCs, a KMS driver must create, initialize and register at - least one struct <structname>drm_encoder</structname> instance. The - instance is allocated and zeroed by the driver, possibly as part of a - larger structure. - </para> - <para> - Drivers must initialize the struct <structname>drm_encoder</structname> - <structfield>possible_crtcs</structfield> and - <structfield>possible_clones</structfield> fields before registering the - encoder. Both fields are bitmasks of respectively the CRTCs that the - encoder can be connected to, and sibling encoders candidate for cloning. - </para> - <para> - After being initialized, the encoder must be registered with a call to - <function>drm_encoder_init</function>. The function takes a pointer to - the encoder functions and an encoder type. Supported types are - <itemizedlist> - <listitem> - DRM_MODE_ENCODER_DAC for VGA and analog on DVI-I/DVI-A - </listitem> - <listitem> - DRM_MODE_ENCODER_TMDS for DVI, HDMI and (embedded) DisplayPort - </listitem> - <listitem> - DRM_MODE_ENCODER_LVDS for display panels - </listitem> - <listitem> - DRM_MODE_ENCODER_TVDAC for TV output (Composite, S-Video, Component, - SCART) - </listitem> - <listitem> - DRM_MODE_ENCODER_VIRTUAL for virtual machine displays - </listitem> - </itemizedlist> - </para> - <para> - Encoders must be attached to a CRTC to be used. DRM drivers leave - encoders unattached at initialization time. Applications (or the fbdev - compatibility layer when implemented) are responsible for attaching the - encoders they want to use to a CRTC. - </para> - </sect3> - </sect2> - <sect2> - <title>Connectors (struct <structname>drm_connector</structname>)</title> - <para> - A connector is the final destination for pixel data on a device, and - usually connects directly to an external display device like a monitor - or laptop panel. A connector can only be attached to one encoder at a - time. The connector is also the structure where information about the - attached display is kept, so it contains fields for display data, EDID - data, DPMS & connection status, and information about modes - supported on the attached displays. - </para> - <sect3> - <title>Connector Initialization</title> - <para> - Finally a KMS driver must create, initialize, register and attach at - least one struct <structname>drm_connector</structname> instance. The - instance is created as other KMS objects and initialized by setting the - following fields. - </para> - <variablelist> - <varlistentry> - <term><structfield>interlace_allowed</structfield></term> - <listitem><para> - Whether the connector can handle interlaced modes. - </para></listitem> - </varlistentry> - <varlistentry> - <term><structfield>doublescan_allowed</structfield></term> - <listitem><para> - Whether the connector can handle doublescan. - </para></listitem> - </varlistentry> - <varlistentry> - <term><structfield>display_info - </structfield></term> - <listitem><para> - Display information is filled from EDID information when a display - is detected. For non hot-pluggable displays such as flat panels in - embedded systems, the driver should initialize the - <structfield>display_info</structfield>.<structfield>width_mm</structfield> - and - <structfield>display_info</structfield>.<structfield>height_mm</structfield> - fields with the physical size of the display. - </para></listitem> - </varlistentry> - <varlistentry> - <term id="drm-kms-connector-polled"><structfield>polled</structfield></term> - <listitem><para> - Connector polling mode, a combination of - <variablelist> - <varlistentry> - <term>DRM_CONNECTOR_POLL_HPD</term> - <listitem><para> - The connector generates hotplug events and doesn't need to be - periodically polled. The CONNECT and DISCONNECT flags must not - be set together with the HPD flag. - </para></listitem> - </varlistentry> - <varlistentry> - <term>DRM_CONNECTOR_POLL_CONNECT</term> - <listitem><para> - Periodically poll the connector for connection. - </para></listitem> - </varlistentry> - <varlistentry> - <term>DRM_CONNECTOR_POLL_DISCONNECT</term> - <listitem><para> - Periodically poll the connector for disconnection. - </para></listitem> - </varlistentry> - </variablelist> - Set to 0 for connectors that don't support connection status - discovery. - </para></listitem> - </varlistentry> - </variablelist> - <para> - The connector is then registered with a call to - <function>drm_connector_init</function> with a pointer to the connector - functions and a connector type, and exposed through sysfs with a call to - <function>drm_connector_register</function>. - </para> - <para> - Supported connector types are - <itemizedlist> - <listitem>DRM_MODE_CONNECTOR_VGA</listitem> - <listitem>DRM_MODE_CONNECTOR_DVII</listitem> - <listitem>DRM_MODE_CONNECTOR_DVID</listitem> - <listitem>DRM_MODE_CONNECTOR_DVIA</listitem> - <listitem>DRM_MODE_CONNECTOR_Composite</listitem> - <listitem>DRM_MODE_CONNECTOR_SVIDEO</listitem> - <listitem>DRM_MODE_CONNECTOR_LVDS</listitem> - <listitem>DRM_MODE_CONNECTOR_Component</listitem> - <listitem>DRM_MODE_CONNECTOR_9PinDIN</listitem> - <listitem>DRM_MODE_CONNECTOR_DisplayPort</listitem> - <listitem>DRM_MODE_CONNECTOR_HDMIA</listitem> - <listitem>DRM_MODE_CONNECTOR_HDMIB</listitem> - <listitem>DRM_MODE_CONNECTOR_TV</listitem> - <listitem>DRM_MODE_CONNECTOR_eDP</listitem> - <listitem>DRM_MODE_CONNECTOR_VIRTUAL</listitem> - </itemizedlist> - </para> - <para> - Connectors must be attached to an encoder to be used. For devices that - map connectors to encoders 1:1, the connector should be attached at - initialization time with a call to - <function>drm_mode_connector_attach_encoder</function>. The driver must - also set the <structname>drm_connector</structname> - <structfield>encoder</structfield> field to point to the attached - encoder. - </para> - <para> - Finally, drivers must initialize the connectors state change detection - with a call to <function>drm_kms_helper_poll_init</function>. If at - least one connector is pollable but can't generate hotplug interrupts - (indicated by the DRM_CONNECTOR_POLL_CONNECT and - DRM_CONNECTOR_POLL_DISCONNECT connector flags), a delayed work will - automatically be queued to periodically poll for changes. Connectors - that can generate hotplug interrupts must be marked with the - DRM_CONNECTOR_POLL_HPD flag instead, and their interrupt handler must - call <function>drm_helper_hpd_irq_event</function>. The function will - queue a delayed work to check the state of all connectors, but no - periodic polling will be done. - </para> - </sect3> - <sect3> - <title>Connector Operations</title> - <note><para> - Unless otherwise state, all operations are mandatory. - </para></note> - <sect4> - <title>DPMS</title> - <synopsis>void (*dpms)(struct drm_connector *connector, int mode);</synopsis> - <para> - The DPMS operation sets the power state of a connector. The mode - argument is one of - <itemizedlist> - <listitem><para>DRM_MODE_DPMS_ON</para></listitem> - <listitem><para>DRM_MODE_DPMS_STANDBY</para></listitem> - <listitem><para>DRM_MODE_DPMS_SUSPEND</para></listitem> - <listitem><para>DRM_MODE_DPMS_OFF</para></listitem> - </itemizedlist> - </para> - <para> - In all but DPMS_ON mode the encoder to which the connector is attached - should put the display in low-power mode by driving its signals - appropriately. If more than one connector is attached to the encoder - care should be taken not to change the power state of other displays as - a side effect. Low-power mode should be propagated to the encoders and - CRTCs when all related connectors are put in low-power mode. - </para> - </sect4> - <sect4> - <title>Modes</title> - <synopsis>int (*fill_modes)(struct drm_connector *connector, uint32_t max_width, - uint32_t max_height);</synopsis> - <para> - Fill the mode list with all supported modes for the connector. If the - <parameter>max_width</parameter> and <parameter>max_height</parameter> - arguments are non-zero, the implementation must ignore all modes wider - than <parameter>max_width</parameter> or higher than - <parameter>max_height</parameter>. - </para> - <para> - The connector must also fill in this operation its - <structfield>display_info</structfield> - <structfield>width_mm</structfield> and - <structfield>height_mm</structfield> fields with the connected display - physical size in millimeters. The fields should be set to 0 if the value - isn't known or is not applicable (for instance for projector devices). - </para> - </sect4> - <sect4> - <title>Connection Status</title> - <para> - The connection status is updated through polling or hotplug events when - supported (see <xref linkend="drm-kms-connector-polled"/>). The status - value is reported to userspace through ioctls and must not be used - inside the driver, as it only gets initialized by a call to - <function>drm_mode_getconnector</function> from userspace. - </para> - <synopsis>enum drm_connector_status (*detect)(struct drm_connector *connector, - bool force);</synopsis> - <para> - Check to see if anything is attached to the connector. The - <parameter>force</parameter> parameter is set to false whilst polling or - to true when checking the connector due to user request. - <parameter>force</parameter> can be used by the driver to avoid - expensive, destructive operations during automated probing. - </para> - <para> - Return connector_status_connected if something is connected to the - connector, connector_status_disconnected if nothing is connected and - connector_status_unknown if the connection state isn't known. - </para> - <para> - Drivers should only return connector_status_connected if the connection - status has really been probed as connected. Connectors that can't detect - the connection status, or failed connection status probes, should return - connector_status_unknown. - </para> - </sect4> - </sect3> - </sect2> - <sect2> - <title>Cleanup</title> - <para> - The DRM core manages its objects' lifetime. When an object is not needed - anymore the core calls its destroy function, which must clean up and - free every resource allocated for the object. Every - <function>drm_*_init</function> call must be matched with a - corresponding <function>drm_*_cleanup</function> call to cleanup CRTCs - (<function>drm_crtc_cleanup</function>), planes - (<function>drm_plane_cleanup</function>), encoders - (<function>drm_encoder_cleanup</function>) and connectors - (<function>drm_connector_cleanup</function>). Furthermore, connectors - that have been added to sysfs must be removed by a call to - <function>drm_connector_unregister</function> before calling - <function>drm_connector_cleanup</function>. - </para> - <para> - Connectors state change detection must be cleanup up with a call to - <function>drm_kms_helper_poll_fini</function>. - </para> - </sect2> - <sect2> - <title>Output discovery and initialization example</title> - <programlisting><![CDATA[ -void intel_crt_init(struct drm_device *dev) -{ - struct drm_connector *connector; - struct intel_output *intel_output; - - intel_output = kzalloc(sizeof(struct intel_output), GFP_KERNEL); - if (!intel_output) - return; - - connector = &intel_output->base; - drm_connector_init(dev, &intel_output->base, - &intel_crt_connector_funcs, DRM_MODE_CONNECTOR_VGA); - - drm_encoder_init(dev, &intel_output->enc, &intel_crt_enc_funcs, - DRM_MODE_ENCODER_DAC); - - drm_mode_connector_attach_encoder(&intel_output->base, - &intel_output->enc); - - /* Set up the DDC bus. */ - intel_output->ddc_bus = intel_i2c_create(dev, GPIOA, "CRTDDC_A"); - if (!intel_output->ddc_bus) { - dev_printk(KERN_ERR, &dev->pdev->dev, "DDC bus registration " - "failed.\n"); - return; - } - - intel_output->type = INTEL_OUTPUT_ANALOG; - connector->interlace_allowed = 0; - connector->doublescan_allowed = 0; - - drm_encoder_helper_add(&intel_output->enc, &intel_crt_helper_funcs); - drm_connector_helper_add(connector, &intel_crt_connector_helper_funcs); - - drm_connector_register(connector); -}]]></programlisting> - <para> - In the example above (taken from the i915 driver), a CRTC, connector and - encoder combination is created. A device-specific i2c bus is also - created for fetching EDID data and performing monitor detection. Once - the process is complete, the new connector is registered with sysfs to - make its properties available to applications. - </para> - </sect2> - <sect2> - <title>KMS API Functions</title> -!Edrivers/gpu/drm/drm_crtc.c - </sect2> - <sect2> - <title>KMS Data Structures</title> -!Iinclude/drm/drm_crtc.h - </sect2> - <sect2> - <title>KMS Locking</title> -!Pdrivers/gpu/drm/drm_modeset_lock.c kms locking -!Iinclude/drm/drm_modeset_lock.h -!Edrivers/gpu/drm/drm_modeset_lock.c - </sect2> - </sect1> - - <!-- Internals: kms helper functions --> - - <sect1> - <title>Mode Setting Helper Functions</title> - <para> - The plane, CRTC, encoder and connector functions provided by the drivers - implement the DRM API. They're called by the DRM core and ioctl handlers - to handle device state changes and configuration request. As implementing - those functions often requires logic not specific to drivers, mid-layer - helper functions are available to avoid duplicating boilerplate code. - </para> - <para> - The DRM core contains one mid-layer implementation. The mid-layer provides - implementations of several plane, CRTC, encoder and connector functions - (called from the top of the mid-layer) that pre-process requests and call - lower-level functions provided by the driver (at the bottom of the - mid-layer). For instance, the - <function>drm_crtc_helper_set_config</function> function can be used to - fill the struct <structname>drm_crtc_funcs</structname> - <structfield>set_config</structfield> field. When called, it will split - the <methodname>set_config</methodname> operation in smaller, simpler - operations and call the driver to handle them. - </para> - <para> - To use the mid-layer, drivers call <function>drm_crtc_helper_add</function>, - <function>drm_encoder_helper_add</function> and - <function>drm_connector_helper_add</function> functions to install their - mid-layer bottom operations handlers, and fill the - <structname>drm_crtc_funcs</structname>, - <structname>drm_encoder_funcs</structname> and - <structname>drm_connector_funcs</structname> structures with pointers to - the mid-layer top API functions. Installing the mid-layer bottom operation - handlers is best done right after registering the corresponding KMS object. - </para> - <para> - The mid-layer is not split between CRTC, encoder and connector operations. - To use it, a driver must provide bottom functions for all of the three KMS - entities. - </para> - <sect2> - <title>Atomic Modeset Helper Functions Reference</title> - <sect3> - <title>Overview</title> -!Pdrivers/gpu/drm/drm_atomic_helper.c overview - </sect3> - <sect3> - <title>Implementing Asynchronous Atomic Commit</title> -!Pdrivers/gpu/drm/drm_atomic_helper.c implementing async commit - </sect3> - <sect3> - <title>Atomic State Reset and Initialization</title> -!Pdrivers/gpu/drm/drm_atomic_helper.c atomic state reset and initialization - </sect3> -!Iinclude/drm/drm_atomic_helper.h -!Edrivers/gpu/drm/drm_atomic_helper.c - </sect2> - <sect2> - <title>Modeset Helper Reference for Common Vtables</title> -!Iinclude/drm/drm_modeset_helper_vtables.h -!Pinclude/drm/drm_modeset_helper_vtables.h overview - </sect2> - <sect2> - <title>Legacy CRTC/Modeset Helper Functions Reference</title> -!Edrivers/gpu/drm/drm_crtc_helper.c -!Pdrivers/gpu/drm/drm_crtc_helper.c overview - </sect2> - <sect2> - <title>Output Probing Helper Functions Reference</title> -!Pdrivers/gpu/drm/drm_probe_helper.c output probing helper overview -!Edrivers/gpu/drm/drm_probe_helper.c - </sect2> - <sect2> - <title>fbdev Helper Functions Reference</title> -!Pdrivers/gpu/drm/drm_fb_helper.c fbdev helpers -!Edrivers/gpu/drm/drm_fb_helper.c -!Iinclude/drm/drm_fb_helper.h - </sect2> - <sect2> - <title>Framebuffer CMA Helper Functions Reference</title> -!Pdrivers/gpu/drm/drm_fb_cma_helper.c framebuffer cma helper functions -!Edrivers/gpu/drm/drm_fb_cma_helper.c - </sect2> - <sect2> - <title>Display Port Helper Functions Reference</title> -!Pdrivers/gpu/drm/drm_dp_helper.c dp helpers -!Iinclude/drm/drm_dp_helper.h -!Edrivers/gpu/drm/drm_dp_helper.c - </sect2> - <sect2> - <title>Display Port Dual Mode Adaptor Helper Functions Reference</title> -!Pdrivers/gpu/drm/drm_dp_dual_mode_helper.c dp dual mode helpers -!Iinclude/drm/drm_dp_dual_mode_helper.h -!Edrivers/gpu/drm/drm_dp_dual_mode_helper.c - </sect2> - <sect2> - <title>Display Port MST Helper Functions Reference</title> -!Pdrivers/gpu/drm/drm_dp_mst_topology.c dp mst helper -!Iinclude/drm/drm_dp_mst_helper.h -!Edrivers/gpu/drm/drm_dp_mst_topology.c - </sect2> - <sect2> - <title>MIPI DSI Helper Functions Reference</title> -!Pdrivers/gpu/drm/drm_mipi_dsi.c dsi helpers -!Iinclude/drm/drm_mipi_dsi.h -!Edrivers/gpu/drm/drm_mipi_dsi.c - </sect2> - <sect2> - <title>EDID Helper Functions Reference</title> -!Edrivers/gpu/drm/drm_edid.c - </sect2> - <sect2> - <title>Rectangle Utilities Reference</title> -!Pinclude/drm/drm_rect.h rect utils -!Iinclude/drm/drm_rect.h -!Edrivers/gpu/drm/drm_rect.c - </sect2> - <sect2> - <title>Flip-work Helper Reference</title> -!Pinclude/drm/drm_flip_work.h flip utils -!Iinclude/drm/drm_flip_work.h -!Edrivers/gpu/drm/drm_flip_work.c - </sect2> - <sect2> - <title>HDMI Infoframes Helper Reference</title> - <para> - Strictly speaking this is not a DRM helper library but generally useable - by any driver interfacing with HDMI outputs like v4l or alsa drivers. - But it nicely fits into the overall topic of mode setting helper - libraries and hence is also included here. - </para> -!Iinclude/linux/hdmi.h -!Edrivers/video/hdmi.c - </sect2> - <sect2> - <title id="drm-kms-planehelpers">Plane Helper Reference</title> -!Edrivers/gpu/drm/drm_plane_helper.c -!Pdrivers/gpu/drm/drm_plane_helper.c overview - </sect2> - <sect2> - <title>Tile group</title> -!Pdrivers/gpu/drm/drm_crtc.c Tile group - </sect2> - <sect2> - <title>Bridges</title> - <sect3> - <title>Overview</title> -!Pdrivers/gpu/drm/drm_bridge.c overview - </sect3> - <sect3> - <title>Default bridge callback sequence</title> -!Pdrivers/gpu/drm/drm_bridge.c bridge callbacks - </sect3> -!Edrivers/gpu/drm/drm_bridge.c - </sect2> - <sect2> - <title>Panel Helper Reference</title> -!Iinclude/drm/drm_panel.h -!Edrivers/gpu/drm/drm_panel.c -!Pdrivers/gpu/drm/drm_panel.c drm panel - </sect2> - </sect1> - - <!-- Internals: kms properties --> - - <sect1 id="drm-kms-properties"> - <title>KMS Properties</title> - <para> - Drivers may need to expose additional parameters to applications than - those described in the previous sections. KMS supports attaching - properties to CRTCs, connectors and planes and offers a userspace API to - list, get and set the property values. - </para> - <para> - Properties are identified by a name that uniquely defines the property - purpose, and store an associated value. For all property types except blob - properties the value is a 64-bit unsigned integer. - </para> - <para> - KMS differentiates between properties and property instances. Drivers - first create properties and then create and associate individual instances - of those properties to objects. A property can be instantiated multiple - times and associated with different objects. Values are stored in property - instances, and all other property information are stored in the property - and shared between all instances of the property. - </para> - <para> - Every property is created with a type that influences how the KMS core - handles the property. Supported property types are - <variablelist> - <varlistentry> - <term>DRM_MODE_PROP_RANGE</term> - <listitem><para>Range properties report their minimum and maximum - admissible values. The KMS core verifies that values set by - application fit in that range.</para></listitem> - </varlistentry> - <varlistentry> - <term>DRM_MODE_PROP_ENUM</term> - <listitem><para>Enumerated properties take a numerical value that - ranges from 0 to the number of enumerated values defined by the - property minus one, and associate a free-formed string name to each - value. Applications can retrieve the list of defined value-name pairs - and use the numerical value to get and set property instance values. - </para></listitem> - </varlistentry> - <varlistentry> - <term>DRM_MODE_PROP_BITMASK</term> - <listitem><para>Bitmask properties are enumeration properties that - additionally restrict all enumerated values to the 0..63 range. - Bitmask property instance values combine one or more of the - enumerated bits defined by the property.</para></listitem> - </varlistentry> - <varlistentry> - <term>DRM_MODE_PROP_BLOB</term> - <listitem><para>Blob properties store a binary blob without any format - restriction. The binary blobs are created as KMS standalone objects, - and blob property instance values store the ID of their associated - blob object.</para> - <para>Blob properties are only used for the connector EDID property - and cannot be created by drivers.</para></listitem> - </varlistentry> - </variablelist> - </para> - <para> - To create a property drivers call one of the following functions depending - on the property type. All property creation functions take property flags - and name, as well as type-specific arguments. - <itemizedlist> - <listitem> - <synopsis>struct drm_property *drm_property_create_range(struct drm_device *dev, int flags, - const char *name, - uint64_t min, uint64_t max);</synopsis> - <para>Create a range property with the given minimum and maximum - values.</para> - </listitem> - <listitem> - <synopsis>struct drm_property *drm_property_create_enum(struct drm_device *dev, int flags, - const char *name, - const struct drm_prop_enum_list *props, - int num_values);</synopsis> - <para>Create an enumerated property. The <parameter>props</parameter> - argument points to an array of <parameter>num_values</parameter> - value-name pairs.</para> - </listitem> - <listitem> - <synopsis>struct drm_property *drm_property_create_bitmask(struct drm_device *dev, - int flags, const char *name, - const struct drm_prop_enum_list *props, - int num_values);</synopsis> - <para>Create a bitmask property. The <parameter>props</parameter> - argument points to an array of <parameter>num_values</parameter> - value-name pairs.</para> - </listitem> - </itemizedlist> - </para> - <para> - Properties can additionally be created as immutable, in which case they - will be read-only for applications but can be modified by the driver. To - create an immutable property drivers must set the DRM_MODE_PROP_IMMUTABLE - flag at property creation time. - </para> - <para> - When no array of value-name pairs is readily available at property - creation time for enumerated or range properties, drivers can create - the property using the <function>drm_property_create</function> function - and manually add enumeration value-name pairs by calling the - <function>drm_property_add_enum</function> function. Care must be taken to - properly specify the property type through the <parameter>flags</parameter> - argument. - </para> - <para> - After creating properties drivers can attach property instances to CRTC, - connector and plane objects by calling the - <function>drm_object_attach_property</function>. The function takes a - pointer to the target object, a pointer to the previously created property - and an initial instance value. - </para> - <sect2> - <title>Existing KMS Properties</title> - <para> - The following table gives description of drm properties exposed by various - modules/drivers. - </para> - <table border="1" cellpadding="0" cellspacing="0"> - <tbody> - <tr style="font-weight: bold;"> - <td valign="top" >Owner Module/Drivers</td> - <td valign="top" >Group</td> - <td valign="top" >Property Name</td> - <td valign="top" >Type</td> - <td valign="top" >Property Values</td> - <td valign="top" >Object attached</td> - <td valign="top" >Description/Restrictions</td> - </tr> - <tr> - <td rowspan="42" valign="top" >DRM</td> - <td rowspan="2" valign="top" >Generic</td> - <td valign="top" >“rotation”</td> - <td valign="top" >BITMASK</td> - <td valign="top" >{ 0, "rotate-0" }, - { 1, "rotate-90" }, - { 2, "rotate-180" }, - { 3, "rotate-270" }, - { 4, "reflect-x" }, - { 5, "reflect-y" }</td> - <td valign="top" >CRTC, Plane</td> - <td valign="top" >rotate-(degrees) rotates the image by the specified amount in degrees - in counter clockwise direction. reflect-x and reflect-y reflects the - image along the specified axis prior to rotation</td> - </tr> - <tr> - <td valign="top" >“scaling mode”</td> - <td valign="top" >ENUM</td> - <td valign="top" >{ "None", "Full", "Center", "Full aspect" }</td> - <td valign="top" >Connector</td> - <td valign="top" >Supported by: amdgpu, gma500, i915, nouveau and radeon.</td> - </tr> - <tr> - <td rowspan="5" valign="top" >Connector</td> - <td valign="top" >“EDID”</td> - <td valign="top" >BLOB | IMMUTABLE</td> - <td valign="top" >0</td> - <td valign="top" >Connector</td> - <td valign="top" >Contains id of edid blob ptr object.</td> - </tr> - <tr> - <td valign="top" >“DPMS”</td> - <td valign="top" >ENUM</td> - <td valign="top" >{ “On”, “Standby”, “Suspend”, “Off” }</td> - <td valign="top" >Connector</td> - <td valign="top" >Contains DPMS operation mode value.</td> - </tr> - <tr> - <td valign="top" >“PATH”</td> - <td valign="top" >BLOB | IMMUTABLE</td> - <td valign="top" >0</td> - <td valign="top" >Connector</td> - <td valign="top" >Contains topology path to a connector.</td> - </tr> - <tr> - <td valign="top" >“TILE”</td> - <td valign="top" >BLOB | IMMUTABLE</td> - <td valign="top" >0</td> - <td valign="top" >Connector</td> - <td valign="top" >Contains tiling information for a connector.</td> - </tr> - <tr> - <td valign="top" >“CRTC_ID”</td> - <td valign="top" >OBJECT</td> - <td valign="top" >DRM_MODE_OBJECT_CRTC</td> - <td valign="top" >Connector</td> - <td valign="top" >CRTC that connector is attached to (atomic)</td> - </tr> - <tr> - <td rowspan="11" valign="top" >Plane</td> - <td valign="top" >“type”</td> - <td valign="top" >ENUM | IMMUTABLE</td> - <td valign="top" >{ "Overlay", "Primary", "Cursor" }</td> - <td valign="top" >Plane</td> - <td valign="top" >Plane type</td> - </tr> - <tr> - <td valign="top" >“SRC_X”</td> - <td valign="top" >RANGE</td> - <td valign="top" >Min=0, Max=UINT_MAX</td> - <td valign="top" >Plane</td> - <td valign="top" >Scanout source x coordinate in 16.16 fixed point (atomic)</td> - </tr> - <tr> - <td valign="top" >“SRC_Y”</td> - <td valign="top" >RANGE</td> - <td valign="top" >Min=0, Max=UINT_MAX</td> - <td valign="top" >Plane</td> - <td valign="top" >Scanout source y coordinate in 16.16 fixed point (atomic)</td> - </tr> - <tr> - <td valign="top" >“SRC_W”</td> - <td valign="top" >RANGE</td> - <td valign="top" >Min=0, Max=UINT_MAX</td> - <td valign="top" >Plane</td> - <td valign="top" >Scanout source width in 16.16 fixed point (atomic)</td> - </tr> - <tr> - <td valign="top" >“SRC_H”</td> - <td valign="top" >RANGE</td> - <td valign="top" >Min=0, Max=UINT_MAX</td> - <td valign="top" >Plane</td> - <td valign="top" >Scanout source height in 16.16 fixed point (atomic)</td> - </tr> - <tr> - <td valign="top" >“CRTC_X”</td> - <td valign="top" >SIGNED_RANGE</td> - <td valign="top" >Min=INT_MIN, Max=INT_MAX</td> - <td valign="top" >Plane</td> - <td valign="top" >Scanout CRTC (destination) x coordinate (atomic)</td> - </tr> - <tr> - <td valign="top" >“CRTC_Y”</td> - <td valign="top" >SIGNED_RANGE</td> - <td valign="top" >Min=INT_MIN, Max=INT_MAX</td> - <td valign="top" >Plane</td> - <td valign="top" >Scanout CRTC (destination) y coordinate (atomic)</td> - </tr> - <tr> - <td valign="top" >“CRTC_W”</td> - <td valign="top" >RANGE</td> - <td valign="top" >Min=0, Max=UINT_MAX</td> - <td valign="top" >Plane</td> - <td valign="top" >Scanout CRTC (destination) width (atomic)</td> - </tr> - <tr> - <td valign="top" >“CRTC_H”</td> - <td valign="top" >RANGE</td> - <td valign="top" >Min=0, Max=UINT_MAX</td> - <td valign="top" >Plane</td> - <td valign="top" >Scanout CRTC (destination) height (atomic)</td> - </tr> - <tr> - <td valign="top" >“FB_ID”</td> - <td valign="top" >OBJECT</td> - <td valign="top" >DRM_MODE_OBJECT_FB</td> - <td valign="top" >Plane</td> - <td valign="top" >Scanout framebuffer (atomic)</td> - </tr> - <tr> - <td valign="top" >“CRTC_ID”</td> - <td valign="top" >OBJECT</td> - <td valign="top" >DRM_MODE_OBJECT_CRTC</td> - <td valign="top" >Plane</td> - <td valign="top" >CRTC that plane is attached to (atomic)</td> - </tr> - <tr> - <td rowspan="2" valign="top" >DVI-I</td> - <td valign="top" >“subconnector”</td> - <td valign="top" >ENUM</td> - <td valign="top" >{ “Unknown”, “DVI-D”, “DVI-A” }</td> - <td valign="top" >Connector</td> - <td valign="top" >TBD</td> - </tr> - <tr> - <td valign="top" >“select subconnector”</td> - <td valign="top" >ENUM</td> - <td valign="top" >{ “Automatic”, “DVI-D”, “DVI-A” }</td> - <td valign="top" >Connector</td> - <td valign="top" >TBD</td> - </tr> - <tr> - <td rowspan="13" valign="top" >TV</td> - <td valign="top" >“subconnector”</td> - <td valign="top" >ENUM</td> - <td valign="top" >{ "Unknown", "Composite", "SVIDEO", "Component", "SCART" }</td> - <td valign="top" >Connector</td> - <td valign="top" >TBD</td> - </tr> - <tr> - <td valign="top" >“select subconnector”</td> - <td valign="top" >ENUM</td> - <td valign="top" >{ "Automatic", "Composite", "SVIDEO", "Component", "SCART" }</td> - <td valign="top" >Connector</td> - <td valign="top" >TBD</td> - </tr> - <tr> - <td valign="top" >“mode”</td> - <td valign="top" >ENUM</td> - <td valign="top" >{ "NTSC_M", "NTSC_J", "NTSC_443", "PAL_B" } etc.</td> - <td valign="top" >Connector</td> - <td valign="top" >TBD</td> - </tr> - <tr> - <td valign="top" >“left margin”</td> - <td valign="top" >RANGE</td> - <td valign="top" >Min=0, Max=100</td> - <td valign="top" >Connector</td> - <td valign="top" >TBD</td> - </tr> - <tr> - <td valign="top" >“right margin”</td> - <td valign="top" >RANGE</td> - <td valign="top" >Min=0, Max=100</td> - <td valign="top" >Connector</td> - <td valign="top" >TBD</td> - </tr> - <tr> - <td valign="top" >“top margin”</td> - <td valign="top" >RANGE</td> - <td valign="top" >Min=0, Max=100</td> - <td valign="top" >Connector</td> - <td valign="top" >TBD</td> - </tr> - <tr> - <td valign="top" >“bottom margin”</td> - <td valign="top" >RANGE</td> - <td valign="top" >Min=0, Max=100</td> - <td valign="top" >Connector</td> - <td valign="top" >TBD</td> - </tr> - <tr> - <td valign="top" >“brightness”</td> - <td valign="top" >RANGE</td> - <td valign="top" >Min=0, Max=100</td> - <td valign="top" >Connector</td> - <td valign="top" >TBD</td> - </tr> - <tr> - <td valign="top" >“contrast”</td> - <td valign="top" >RANGE</td> - <td valign="top" >Min=0, Max=100</td> - <td valign="top" >Connector</td> - <td valign="top" >TBD</td> - </tr> - <tr> - <td valign="top" >“flicker reduction”</td> - <td valign="top" >RANGE</td> - <td valign="top" >Min=0, Max=100</td> - <td valign="top" >Connector</td> - <td valign="top" >TBD</td> - </tr> - <tr> - <td valign="top" >“overscan”</td> - <td valign="top" >RANGE</td> - <td valign="top" >Min=0, Max=100</td> - <td valign="top" >Connector</td> - <td valign="top" >TBD</td> - </tr> - <tr> - <td valign="top" >“saturation”</td> - <td valign="top" >RANGE</td> - <td valign="top" >Min=0, Max=100</td> - <td valign="top" >Connector</td> - <td valign="top" >TBD</td> - </tr> - <tr> - <td valign="top" >“hue”</td> - <td valign="top" >RANGE</td> - <td valign="top" >Min=0, Max=100</td> - <td valign="top" >Connector</td> - <td valign="top" >TBD</td> - </tr> - <tr> - <td rowspan="2" valign="top" >Virtual GPU</td> - <td valign="top" >“suggested X”</td> - <td valign="top" >RANGE</td> - <td valign="top" >Min=0, Max=0xffffffff</td> - <td valign="top" >Connector</td> - <td valign="top" >property to suggest an X offset for a connector</td> - </tr> - <tr> - <td valign="top" >“suggested Y”</td> - <td valign="top" >RANGE</td> - <td valign="top" >Min=0, Max=0xffffffff</td> - <td valign="top" >Connector</td> - <td valign="top" >property to suggest an Y offset for a connector</td> - </tr> - <tr> - <td rowspan="7" valign="top" >Optional</td> - <td valign="top" >"aspect ratio"</td> - <td valign="top" >ENUM</td> - <td valign="top" >{ "None", "4:3", "16:9" }</td> - <td valign="top" >Connector</td> - <td valign="top" >TDB</td> - </tr> - <tr> - <td valign="top" >“dirty”</td> - <td valign="top" >ENUM | IMMUTABLE</td> - <td valign="top" >{ "Off", "On", "Annotate" }</td> - <td valign="top" >Connector</td> - <td valign="top" >TBD</td> - </tr> - <tr> - <td valign="top" >“DEGAMMA_LUT”</td> - <td valign="top" >BLOB</td> - <td valign="top" >0</td> - <td valign="top" >CRTC</td> - <td valign="top" >DRM property to set the degamma lookup table - (LUT) mapping pixel data from the framebuffer before it is - given to the transformation matrix. The data is an interpreted - as an array of struct drm_color_lut elements. Hardware might - choose not to use the full precision of the LUT elements nor - use all the elements of the LUT (for example the hardware - might choose to interpolate between LUT[0] and LUT[4]). </td> - </tr> - <tr> - <td valign="top" >“DEGAMMA_LUT_SIZE”</td> - <td valign="top" >RANGE | IMMUTABLE</td> - <td valign="top" >Min=0, Max=UINT_MAX</td> - <td valign="top" >CRTC</td> - <td valign="top" >DRM property to gives the size of the lookup - table to be set on the DEGAMMA_LUT property (the size depends - on the underlying hardware).</td> - </tr> - <tr> - <td valign="top" >“CTM”</td> - <td valign="top" >BLOB</td> - <td valign="top" >0</td> - <td valign="top" >CRTC</td> - <td valign="top" >DRM property to set the current - transformation matrix (CTM) apply to pixel data after the - lookup through the degamma LUT and before the lookup through - the gamma LUT. The data is an interpreted as a struct - drm_color_ctm.</td> - </tr> - <tr> - <td valign="top" >“GAMMA_LUT”</td> - <td valign="top" >BLOB</td> - <td valign="top" >0</td> - <td valign="top" >CRTC</td> - <td valign="top" >DRM property to set the gamma lookup table - (LUT) mapping pixel data after to the transformation matrix to - data sent to the connector. The data is an interpreted as an - array of struct drm_color_lut elements. Hardware might choose - not to use the full precision of the LUT elements nor use all - the elements of the LUT (for example the hardware might choose - to interpolate between LUT[0] and LUT[4]).</td> - </tr> - <tr> - <td valign="top" >“GAMMA_LUT_SIZE”</td> - <td valign="top" >RANGE | IMMUTABLE</td> - <td valign="top" >Min=0, Max=UINT_MAX</td> - <td valign="top" >CRTC</td> - <td valign="top" >DRM property to gives the size of the lookup - table to be set on the GAMMA_LUT property (the size depends on - the underlying hardware).</td> - </tr> - <tr> - <td rowspan="20" valign="top" >i915</td> - <td rowspan="2" valign="top" >Generic</td> - <td valign="top" >"Broadcast RGB"</td> - <td valign="top" >ENUM</td> - <td valign="top" >{ "Automatic", "Full", "Limited 16:235" }</td> - <td valign="top" >Connector</td> - <td valign="top" >When this property is set to Limited 16:235 - and CTM is set, the hardware will be programmed with the - result of the multiplication of CTM by the limited range - matrix to ensure the pixels normaly in the range 0..1.0 are - remapped to the range 16/255..235/255.</td> - </tr> - <tr> - <td valign="top" >“audio”</td> - <td valign="top" >ENUM</td> - <td valign="top" >{ "force-dvi", "off", "auto", "on" }</td> - <td valign="top" >Connector</td> - <td valign="top" >TBD</td> - </tr> - <tr> - <td rowspan="17" valign="top" >SDVO-TV</td> - <td valign="top" >“mode”</td> - <td valign="top" >ENUM</td> - <td valign="top" >{ "NTSC_M", "NTSC_J", "NTSC_443", "PAL_B" } etc.</td> - <td valign="top" >Connector</td> - <td valign="top" >TBD</td> - </tr> - <tr> - <td valign="top" >"left_margin"</td> - <td valign="top" >RANGE</td> - <td valign="top" >Min=0, Max= SDVO dependent</td> - <td valign="top" >Connector</td> - <td valign="top" >TBD</td> - </tr> - <tr> - <td valign="top" >"right_margin"</td> - <td valign="top" >RANGE</td> - <td valign="top" >Min=0, Max= SDVO dependent</td> - <td valign="top" >Connector</td> - <td valign="top" >TBD</td> - </tr> - <tr> - <td valign="top" >"top_margin"</td> - <td valign="top" >RANGE</td> - <td valign="top" >Min=0, Max= SDVO dependent</td> - <td valign="top" >Connector</td> - <td valign="top" >TBD</td> - </tr> - <tr> - <td valign="top" >"bottom_margin"</td> - <td valign="top" >RANGE</td> - <td valign="top" >Min=0, Max= SDVO dependent</td> - <td valign="top" >Connector</td> - <td valign="top" >TBD</td> - </tr> - <tr> - <td valign="top" >“hpos”</td> - <td valign="top" >RANGE</td> - <td valign="top" >Min=0, Max= SDVO dependent</td> - <td valign="top" >Connector</td> - <td valign="top" >TBD</td> - </tr> - <tr> - <td valign="top" >“vpos”</td> - <td valign="top" >RANGE</td> - <td valign="top" >Min=0, Max= SDVO dependent</td> - <td valign="top" >Connector</td> - <td valign="top" >TBD</td> - </tr> - <tr> - <td valign="top" >“contrast”</td> - <td valign="top" >RANGE</td> - <td valign="top" >Min=0, Max= SDVO dependent</td> - <td valign="top" >Connector</td> - <td valign="top" >TBD</td> - </tr> - <tr> - <td valign="top" >“saturation”</td> - <td valign="top" >RANGE</td> - <td valign="top" >Min=0, Max= SDVO dependent</td> - <td valign="top" >Connector</td> - <td valign="top" >TBD</td> - </tr> - <tr> - <td valign="top" >“hue”</td> - <td valign="top" >RANGE</td> - <td valign="top" >Min=0, Max= SDVO dependent</td> - <td valign="top" >Connector</td> - <td valign="top" >TBD</td> - </tr> - <tr> - <td valign="top" >“sharpness”</td> - <td valign="top" >RANGE</td> - <td valign="top" >Min=0, Max= SDVO dependent</td> - <td valign="top" >Connector</td> - <td valign="top" >TBD</td> - </tr> - <tr> - <td valign="top" >“flicker_filter”</td> - <td valign="top" >RANGE</td> - <td valign="top" >Min=0, Max= SDVO dependent</td> - <td valign="top" >Connector</td> - <td valign="top" >TBD</td> - </tr> - <tr> - <td valign="top" >“flicker_filter_adaptive”</td> - <td valign="top" >RANGE</td> - <td valign="top" >Min=0, Max= SDVO dependent</td> - <td valign="top" >Connector</td> - <td valign="top" >TBD</td> - </tr> - <tr> - <td valign="top" >“flicker_filter_2d”</td> - <td valign="top" >RANGE</td> - <td valign="top" >Min=0, Max= SDVO dependent</td> - <td valign="top" >Connector</td> - <td valign="top" >TBD</td> - </tr> - <tr> - <td valign="top" >“tv_chroma_filter”</td> - <td valign="top" >RANGE</td> - <td valign="top" >Min=0, Max= SDVO dependent</td> - <td valign="top" >Connector</td> - <td valign="top" >TBD</td> - </tr> - <tr> - <td valign="top" >“tv_luma_filter”</td> - <td valign="top" >RANGE</td> - <td valign="top" >Min=0, Max= SDVO dependent</td> - <td valign="top" >Connector</td> - <td valign="top" >TBD</td> - </tr> - <tr> - <td valign="top" >“dot_crawl”</td> - <td valign="top" >RANGE</td> - <td valign="top" >Min=0, Max=1</td> - <td valign="top" >Connector</td> - <td valign="top" >TBD</td> - </tr> - <tr> - <td valign="top" >SDVO-TV/LVDS</td> - <td valign="top" >“brightness”</td> - <td valign="top" >RANGE</td> - <td valign="top" >Min=0, Max= SDVO dependent</td> - <td valign="top" >Connector</td> - <td valign="top" >TBD</td> - </tr> - <tr> - <td rowspan="2" valign="top" >CDV gma-500</td> - <td rowspan="2" valign="top" >Generic</td> - <td valign="top" >"Broadcast RGB"</td> - <td valign="top" >ENUM</td> - <td valign="top" >{ “Full”, “Limited 16:235” }</td> - <td valign="top" >Connector</td> - <td valign="top" >TBD</td> - </tr> - <tr> - <td valign="top" >"Broadcast RGB"</td> - <td valign="top" >ENUM</td> - <td valign="top" >{ “off”, “auto”, “on” }</td> - <td valign="top" >Connector</td> - <td valign="top" >TBD</td> - </tr> - <tr> - <td rowspan="19" valign="top" >Poulsbo</td> - <td rowspan="1" valign="top" >Generic</td> - <td valign="top" >“backlight”</td> - <td valign="top" >RANGE</td> - <td valign="top" >Min=0, Max=100</td> - <td valign="top" >Connector</td> - <td valign="top" >TBD</td> - </tr> - <tr> - <td rowspan="17" valign="top" >SDVO-TV</td> - <td valign="top" >“mode”</td> - <td valign="top" >ENUM</td> - <td valign="top" >{ "NTSC_M", "NTSC_J", "NTSC_443", "PAL_B" } etc.</td> - <td valign="top" >Connector</td> - <td valign="top" >TBD</td> - </tr> - <tr> - <td valign="top" >"left_margin"</td> - <td valign="top" >RANGE</td> - <td valign="top" >Min=0, Max= SDVO dependent</td> - <td valign="top" >Connector</td> - <td valign="top" >TBD</td> - </tr> - <tr> - <td valign="top" >"right_margin"</td> - <td valign="top" >RANGE</td> - <td valign="top" >Min=0, Max= SDVO dependent</td> - <td valign="top" >Connector</td> - <td valign="top" >TBD</td> - </tr> - <tr> - <td valign="top" >"top_margin"</td> - <td valign="top" >RANGE</td> - <td valign="top" >Min=0, Max= SDVO dependent</td> - <td valign="top" >Connector</td> - <td valign="top" >TBD</td> - </tr> - <tr> - <td valign="top" >"bottom_margin"</td> - <td valign="top" >RANGE</td> - <td valign="top" >Min=0, Max= SDVO dependent</td> - <td valign="top" >Connector</td> - <td valign="top" >TBD</td> - </tr> - <tr> - <td valign="top" >“hpos”</td> - <td valign="top" >RANGE</td> - <td valign="top" >Min=0, Max= SDVO dependent</td> - <td valign="top" >Connector</td> - <td valign="top" >TBD</td> - </tr> - <tr> - <td valign="top" >“vpos”</td> - <td valign="top" >RANGE</td> - <td valign="top" >Min=0, Max= SDVO dependent</td> - <td valign="top" >Connector</td> - <td valign="top" >TBD</td> - </tr> - <tr> - <td valign="top" >“contrast”</td> - <td valign="top" >RANGE</td> - <td valign="top" >Min=0, Max= SDVO dependent</td> - <td valign="top" >Connector</td> - <td valign="top" >TBD</td> - </tr> - <tr> - <td valign="top" >“saturation”</td> - <td valign="top" >RANGE</td> - <td valign="top" >Min=0, Max= SDVO dependent</td> - <td valign="top" >Connector</td> - <td valign="top" >TBD</td> - </tr> - <tr> - <td valign="top" >“hue”</td> - <td valign="top" >RANGE</td> - <td valign="top" >Min=0, Max= SDVO dependent</td> - <td valign="top" >Connector</td> - <td valign="top" >TBD</td> - </tr> - <tr> - <td valign="top" >“sharpness”</td> - <td valign="top" >RANGE</td> - <td valign="top" >Min=0, Max= SDVO dependent</td> - <td valign="top" >Connector</td> - <td valign="top" >TBD</td> - </tr> - <tr> - <td valign="top" >“flicker_filter”</td> - <td valign="top" >RANGE</td> - <td valign="top" >Min=0, Max= SDVO dependent</td> - <td valign="top" >Connector</td> - <td valign="top" >TBD</td> - </tr> - <tr> - <td valign="top" >“flicker_filter_adaptive”</td> - <td valign="top" >RANGE</td> - <td valign="top" >Min=0, Max= SDVO dependent</td> - <td valign="top" >Connector</td> - <td valign="top" >TBD</td> - </tr> - <tr> - <td valign="top" >“flicker_filter_2d”</td> - <td valign="top" >RANGE</td> - <td valign="top" >Min=0, Max= SDVO dependent</td> - <td valign="top" >Connector</td> - <td valign="top" >TBD</td> - </tr> - <tr> - <td valign="top" >“tv_chroma_filter”</td> - <td valign="top" >RANGE</td> - <td valign="top" >Min=0, Max= SDVO dependent</td> - <td valign="top" >Connector</td> - <td valign="top" >TBD</td> - </tr> - <tr> - <td valign="top" >“tv_luma_filter”</td> - <td valign="top" >RANGE</td> - <td valign="top" >Min=0, Max= SDVO dependent</td> - <td valign="top" >Connector</td> - <td valign="top" >TBD</td> - </tr> - <tr> - <td valign="top" >“dot_crawl”</td> - <td valign="top" >RANGE</td> - <td valign="top" >Min=0, Max=1</td> - <td valign="top" >Connector</td> - <td valign="top" >TBD</td> - </tr> - <tr> - <td valign="top" >SDVO-TV/LVDS</td> - <td valign="top" >“brightness”</td> - <td valign="top" >RANGE</td> - <td valign="top" >Min=0, Max= SDVO dependent</td> - <td valign="top" >Connector</td> - <td valign="top" >TBD</td> - </tr> - <tr> - <td rowspan="11" valign="top" >armada</td> - <td rowspan="2" valign="top" >CRTC</td> - <td valign="top" >"CSC_YUV"</td> - <td valign="top" >ENUM</td> - <td valign="top" >{ "Auto" , "CCIR601", "CCIR709" }</td> - <td valign="top" >CRTC</td> - <td valign="top" >TBD</td> - </tr> - <tr> - <td valign="top" >"CSC_RGB"</td> - <td valign="top" >ENUM</td> - <td valign="top" >{ "Auto", "Computer system", "Studio" }</td> - <td valign="top" >CRTC</td> - <td valign="top" >TBD</td> - </tr> - <tr> - <td rowspan="9" valign="top" >Overlay</td> - <td valign="top" >"colorkey"</td> - <td valign="top" >RANGE</td> - <td valign="top" >Min=0, Max=0xffffff</td> - <td valign="top" >Plane</td> - <td valign="top" >TBD</td> - </tr> - <tr> - <td valign="top" >"colorkey_min"</td> - <td valign="top" >RANGE</td> - <td valign="top" >Min=0, Max=0xffffff</td> - <td valign="top" >Plane</td> - <td valign="top" >TBD</td> - </tr> - <tr> - <td valign="top" >"colorkey_max"</td> - <td valign="top" >RANGE</td> - <td valign="top" >Min=0, Max=0xffffff</td> - <td valign="top" >Plane</td> - <td valign="top" >TBD</td> - </tr> - <tr> - <td valign="top" >"colorkey_val"</td> - <td valign="top" >RANGE</td> - <td valign="top" >Min=0, Max=0xffffff</td> - <td valign="top" >Plane</td> - <td valign="top" >TBD</td> - </tr> - <tr> - <td valign="top" >"colorkey_alpha"</td> - <td valign="top" >RANGE</td> - <td valign="top" >Min=0, Max=0xffffff</td> - <td valign="top" >Plane</td> - <td valign="top" >TBD</td> - </tr> - <tr> - <td valign="top" >"colorkey_mode"</td> - <td valign="top" >ENUM</td> - <td valign="top" >{ "disabled", "Y component", "U component" - , "V component", "RGB", “R component", "G component", "B component" }</td> - <td valign="top" >Plane</td> - <td valign="top" >TBD</td> - </tr> - <tr> - <td valign="top" >"brightness"</td> - <td valign="top" >RANGE</td> - <td valign="top" >Min=0, Max=256 + 255</td> - <td valign="top" >Plane</td> - <td valign="top" >TBD</td> - </tr> - <tr> - <td valign="top" >"contrast"</td> - <td valign="top" >RANGE</td> - <td valign="top" >Min=0, Max=0x7fff</td> - <td valign="top" >Plane</td> - <td valign="top" >TBD</td> - </tr> - <tr> - <td valign="top" >"saturation"</td> - <td valign="top" >RANGE</td> - <td valign="top" >Min=0, Max=0x7fff</td> - <td valign="top" >Plane</td> - <td valign="top" >TBD</td> - </tr> - <tr> - <td rowspan="2" valign="top" >exynos</td> - <td valign="top" >CRTC</td> - <td valign="top" >“mode”</td> - <td valign="top" >ENUM</td> - <td valign="top" >{ "normal", "blank" }</td> - <td valign="top" >CRTC</td> - <td valign="top" >TBD</td> - </tr> - <tr> - <td valign="top" >Overlay</td> - <td valign="top" >“zpos”</td> - <td valign="top" >RANGE</td> - <td valign="top" >Min=0, Max=MAX_PLANE-1</td> - <td valign="top" >Plane</td> - <td valign="top" >TBD</td> - </tr> - <tr> - <td rowspan="2" valign="top" >i2c/ch7006_drv</td> - <td valign="top" >Generic</td> - <td valign="top" >“scale”</td> - <td valign="top" >RANGE</td> - <td valign="top" >Min=0, Max=2</td> - <td valign="top" >Connector</td> - <td valign="top" >TBD</td> - </tr> - <tr> - <td rowspan="1" valign="top" >TV</td> - <td valign="top" >“mode”</td> - <td valign="top" >ENUM</td> - <td valign="top" >{ "PAL", "PAL-M","PAL-N"}, ”PAL-Nc" - , "PAL-60", "NTSC-M", "NTSC-J" }</td> - <td valign="top" >Connector</td> - <td valign="top" >TBD</td> - </tr> - <tr> - <td rowspan="15" valign="top" >nouveau</td> - <td rowspan="6" valign="top" >NV10 Overlay</td> - <td valign="top" >"colorkey"</td> - <td valign="top" >RANGE</td> - <td valign="top" >Min=0, Max=0x01ffffff</td> - <td valign="top" >Plane</td> - <td valign="top" >TBD</td> - </tr> - <tr> - <td valign="top" >“contrast”</td> - <td valign="top" >RANGE</td> - <td valign="top" >Min=0, Max=8192-1</td> - <td valign="top" >Plane</td> - <td valign="top" >TBD</td> - </tr> - <tr> - <td valign="top" >“brightness”</td> - <td valign="top" >RANGE</td> - <td valign="top" >Min=0, Max=1024</td> - <td valign="top" >Plane</td> - <td valign="top" >TBD</td> - </tr> - <tr> - <td valign="top" >“hue”</td> - <td valign="top" >RANGE</td> - <td valign="top" >Min=0, Max=359</td> - <td valign="top" >Plane</td> - <td valign="top" >TBD</td> - </tr> - <tr> - <td valign="top" >“saturation”</td> - <td valign="top" >RANGE</td> - <td valign="top" >Min=0, Max=8192-1</td> - <td valign="top" >Plane</td> - <td valign="top" >TBD</td> - </tr> - <tr> - <td valign="top" >“iturbt_709”</td> - <td valign="top" >RANGE</td> - <td valign="top" >Min=0, Max=1</td> - <td valign="top" >Plane</td> - <td valign="top" >TBD</td> - </tr> - <tr> - <td rowspan="2" valign="top" >Nv04 Overlay</td> - <td valign="top" >“colorkey”</td> - <td valign="top" >RANGE</td> - <td valign="top" >Min=0, Max=0x01ffffff</td> - <td valign="top" >Plane</td> - <td valign="top" >TBD</td> - </tr> - <tr> - <td valign="top" >“brightness”</td> - <td valign="top" >RANGE</td> - <td valign="top" >Min=0, Max=1024</td> - <td valign="top" >Plane</td> - <td valign="top" >TBD</td> - </tr> - <tr> - <td rowspan="7" valign="top" >Display</td> - <td valign="top" >“dithering mode”</td> - <td valign="top" >ENUM</td> - <td valign="top" >{ "auto", "off", "on" }</td> - <td valign="top" >Connector</td> - <td valign="top" >TBD</td> - </tr> - <tr> - <td valign="top" >“dithering depth”</td> - <td valign="top" >ENUM</td> - <td valign="top" >{ "auto", "off", "on", "static 2x2", "dynamic 2x2", "temporal" }</td> - <td valign="top" >Connector</td> - <td valign="top" >TBD</td> - </tr> - <tr> - <td valign="top" >“underscan”</td> - <td valign="top" >ENUM</td> - <td valign="top" >{ "auto", "6 bpc", "8 bpc" }</td> - <td valign="top" >Connector</td> - <td valign="top" >TBD</td> - </tr> - <tr> - <td valign="top" >“underscan hborder”</td> - <td valign="top" >RANGE</td> - <td valign="top" >Min=0, Max=128</td> - <td valign="top" >Connector</td> - <td valign="top" >TBD</td> - </tr> - <tr> - <td valign="top" >“underscan vborder”</td> - <td valign="top" >RANGE</td> - <td valign="top" >Min=0, Max=128</td> - <td valign="top" >Connector</td> - <td valign="top" >TBD</td> - </tr> - <tr> - <td valign="top" >“vibrant hue”</td> - <td valign="top" >RANGE</td> - <td valign="top" >Min=0, Max=180</td> - <td valign="top" >Connector</td> - <td valign="top" >TBD</td> - </tr> - <tr> - <td valign="top" >“color vibrance”</td> - <td valign="top" >RANGE</td> - <td valign="top" >Min=0, Max=200</td> - <td valign="top" >Connector</td> - <td valign="top" >TBD</td> - </tr> - <tr> - <td valign="top" >omap</td> - <td valign="top" >Generic</td> - <td valign="top" >“zorder”</td> - <td valign="top" >RANGE</td> - <td valign="top" >Min=0, Max=3</td> - <td valign="top" >CRTC, Plane</td> - <td valign="top" >TBD</td> - </tr> - <tr> - <td valign="top" >qxl</td> - <td valign="top" >Generic</td> - <td valign="top" >“hotplug_mode_update"</td> - <td valign="top" >RANGE</td> - <td valign="top" >Min=0, Max=1</td> - <td valign="top" >Connector</td> - <td valign="top" >TBD</td> - </tr> - <tr> - <td rowspan="9" valign="top" >radeon</td> - <td valign="top" >DVI-I</td> - <td valign="top" >“coherent”</td> - <td valign="top" >RANGE</td> - <td valign="top" >Min=0, Max=1</td> - <td valign="top" >Connector</td> - <td valign="top" >TBD</td> - </tr> - <tr> - <td valign="top" >DAC enable load detect</td> - <td valign="top" >“load detection”</td> - <td valign="top" >RANGE</td> - <td valign="top" >Min=0, Max=1</td> - <td valign="top" >Connector</td> - <td valign="top" >TBD</td> - </tr> - <tr> - <td valign="top" >TV Standard</td> - <td valign="top" >"tv standard"</td> - <td valign="top" >ENUM</td> - <td valign="top" >{ "ntsc", "pal", "pal-m", "pal-60", "ntsc-j" - , "scart-pal", "pal-cn", "secam" }</td> - <td valign="top" >Connector</td> - <td valign="top" >TBD</td> - </tr> - <tr> - <td valign="top" >legacy TMDS PLL detect</td> - <td valign="top" >"tmds_pll"</td> - <td valign="top" >ENUM</td> - <td valign="top" >{ "driver", "bios" }</td> - <td valign="top" >-</td> - <td valign="top" >TBD</td> - </tr> - <tr> - <td rowspan="3" valign="top" >Underscan</td> - <td valign="top" >"underscan"</td> - <td valign="top" >ENUM</td> - <td valign="top" >{ "off", "on", "auto" }</td> - <td valign="top" >Connector</td> - <td valign="top" >TBD</td> - </tr> - <tr> - <td valign="top" >"underscan hborder"</td> - <td valign="top" >RANGE</td> - <td valign="top" >Min=0, Max=128</td> - <td valign="top" >Connector</td> - <td valign="top" >TBD</td> - </tr> - <tr> - <td valign="top" >"underscan vborder"</td> - <td valign="top" >RANGE</td> - <td valign="top" >Min=0, Max=128</td> - <td valign="top" >Connector</td> - <td valign="top" >TBD</td> - </tr> - <tr> - <td valign="top" >Audio</td> - <td valign="top" >“audio”</td> - <td valign="top" >ENUM</td> - <td valign="top" >{ "off", "on", "auto" }</td> - <td valign="top" >Connector</td> - <td valign="top" >TBD</td> - </tr> - <tr> - <td valign="top" >FMT Dithering</td> - <td valign="top" >“dither”</td> - <td valign="top" >ENUM</td> - <td valign="top" >{ "off", "on" }</td> - <td valign="top" >Connector</td> - <td valign="top" >TBD</td> - </tr> - <tr> - <td rowspan="3" valign="top" >rcar-du</td> - <td rowspan="3" valign="top" >Generic</td> - <td valign="top" >"alpha"</td> - <td valign="top" >RANGE</td> - <td valign="top" >Min=0, Max=255</td> - <td valign="top" >Plane</td> - <td valign="top" >TBD</td> - </tr> - <tr> - <td valign="top" >"colorkey"</td> - <td valign="top" >RANGE</td> - <td valign="top" >Min=0, Max=0x01ffffff</td> - <td valign="top" >Plane</td> - <td valign="top" >TBD</td> - </tr> - <tr> - <td valign="top" >"zpos"</td> - <td valign="top" >RANGE</td> - <td valign="top" >Min=1, Max=7</td> - <td valign="top" >Plane</td> - <td valign="top" >TBD</td> - </tr> - </tbody> - </table> - </sect2> - </sect1> - - <!-- Internals: vertical blanking --> - - <sect1 id="drm-vertical-blank"> - <title>Vertical Blanking</title> - <para> - Vertical blanking plays a major role in graphics rendering. To achieve - tear-free display, users must synchronize page flips and/or rendering to - vertical blanking. The DRM API offers ioctls to perform page flips - synchronized to vertical blanking and wait for vertical blanking. - </para> - <para> - The DRM core handles most of the vertical blanking management logic, which - involves filtering out spurious interrupts, keeping race-free blanking - counters, coping with counter wrap-around and resets and keeping use - counts. It relies on the driver to generate vertical blanking interrupts - and optionally provide a hardware vertical blanking counter. Drivers must - implement the following operations. - </para> - <itemizedlist> - <listitem> - <synopsis>int (*enable_vblank) (struct drm_device *dev, int crtc); -void (*disable_vblank) (struct drm_device *dev, int crtc);</synopsis> - <para> - Enable or disable vertical blanking interrupts for the given CRTC. - </para> - </listitem> - <listitem> - <synopsis>u32 (*get_vblank_counter) (struct drm_device *dev, int crtc);</synopsis> - <para> - Retrieve the value of the vertical blanking counter for the given - CRTC. If the hardware maintains a vertical blanking counter its value - should be returned. Otherwise drivers can use the - <function>drm_vblank_count</function> helper function to handle this - operation. - </para> - </listitem> - </itemizedlist> - <para> - Drivers must initialize the vertical blanking handling core with a call to - <function>drm_vblank_init</function> in their - <methodname>load</methodname> operation. The function will set the struct - <structname>drm_device</structname> - <structfield>vblank_disable_allowed</structfield> field to 0. This will - keep vertical blanking interrupts enabled permanently until the first mode - set operation, where <structfield>vblank_disable_allowed</structfield> is - set to 1. The reason behind this is not clear. Drivers can set the field - to 1 after <function>calling drm_vblank_init</function> to make vertical - blanking interrupts dynamically managed from the beginning. - </para> - <para> - Vertical blanking interrupts can be enabled by the DRM core or by drivers - themselves (for instance to handle page flipping operations). The DRM core - maintains a vertical blanking use count to ensure that the interrupts are - not disabled while a user still needs them. To increment the use count, - drivers call <function>drm_vblank_get</function>. Upon return vertical - blanking interrupts are guaranteed to be enabled. - </para> - <para> - To decrement the use count drivers call - <function>drm_vblank_put</function>. Only when the use count drops to zero - will the DRM core disable the vertical blanking interrupts after a delay - by scheduling a timer. The delay is accessible through the vblankoffdelay - module parameter or the <varname>drm_vblank_offdelay</varname> global - variable and expressed in milliseconds. Its default value is 5000 ms. - Zero means never disable, and a negative value means disable immediately. - Drivers may override the behaviour by setting the - <structname>drm_device</structname> - <structfield>vblank_disable_immediate</structfield> flag, which when set - causes vblank interrupts to be disabled immediately regardless of the - drm_vblank_offdelay value. The flag should only be set if there's a - properly working hardware vblank counter present. - </para> - <para> - When a vertical blanking interrupt occurs drivers only need to call the - <function>drm_handle_vblank</function> function to account for the - interrupt. - </para> - <para> - Resources allocated by <function>drm_vblank_init</function> must be freed - with a call to <function>drm_vblank_cleanup</function> in the driver - <methodname>unload</methodname> operation handler. - </para> - <sect2> - <title>Vertical Blanking and Interrupt Handling Functions Reference</title> -!Edrivers/gpu/drm/drm_irq.c -!Finclude/drm/drmP.h drm_crtc_vblank_waitqueue - </sect2> - </sect1> - - <!-- Internals: open/close, file operations and ioctls --> - - <sect1> - <title>Open/Close, File Operations and IOCTLs</title> - <sect2> - <title>Open and Close</title> - <synopsis>int (*firstopen) (struct drm_device *); -void (*lastclose) (struct drm_device *); -int (*open) (struct drm_device *, struct drm_file *); -void (*preclose) (struct drm_device *, struct drm_file *); -void (*postclose) (struct drm_device *, struct drm_file *);</synopsis> - <abstract>Open and close handlers. None of those methods are mandatory. - </abstract> - <para> - The <methodname>firstopen</methodname> method is called by the DRM core - for legacy UMS (User Mode Setting) drivers only when an application - opens a device that has no other opened file handle. UMS drivers can - implement it to acquire device resources. KMS drivers can't use the - method and must acquire resources in the <methodname>load</methodname> - method instead. - </para> - <para> - Similarly the <methodname>lastclose</methodname> method is called when - the last application holding a file handle opened on the device closes - it, for both UMS and KMS drivers. Additionally, the method is also - called at module unload time or, for hot-pluggable devices, when the - device is unplugged. The <methodname>firstopen</methodname> and - <methodname>lastclose</methodname> calls can thus be unbalanced. - </para> - <para> - The <methodname>open</methodname> method is called every time the device - is opened by an application. Drivers can allocate per-file private data - in this method and store them in the struct - <structname>drm_file</structname> <structfield>driver_priv</structfield> - field. Note that the <methodname>open</methodname> method is called - before <methodname>firstopen</methodname>. - </para> - <para> - The close operation is split into <methodname>preclose</methodname> and - <methodname>postclose</methodname> methods. Drivers must stop and - cleanup all per-file operations in the <methodname>preclose</methodname> - method. For instance pending vertical blanking and page flip events must - be cancelled. No per-file operation is allowed on the file handle after - returning from the <methodname>preclose</methodname> method. - </para> - <para> - Finally the <methodname>postclose</methodname> method is called as the - last step of the close operation, right before calling the - <methodname>lastclose</methodname> method if no other open file handle - exists for the device. Drivers that have allocated per-file private data - in the <methodname>open</methodname> method should free it here. - </para> - <para> - The <methodname>lastclose</methodname> method should restore CRTC and - plane properties to default value, so that a subsequent open of the - device will not inherit state from the previous user. It can also be - used to execute delayed power switching state changes, e.g. in - conjunction with the vga_switcheroo infrastructure (see - <xref linkend="vga_switcheroo"/>). Beyond that KMS drivers should not - do any further cleanup. Only legacy UMS drivers might need to clean up - device state so that the vga console or an independent fbdev driver - could take over. - </para> - </sect2> - <sect2> - <title>File Operations</title> -!Pdrivers/gpu/drm/drm_fops.c file operations -!Edrivers/gpu/drm/drm_fops.c - </sect2> - <sect2> - <title>IOCTLs</title> - <synopsis>struct drm_ioctl_desc *ioctls; -int num_ioctls;</synopsis> - <abstract>Driver-specific ioctls descriptors table.</abstract> - <para> - Driver-specific ioctls numbers start at DRM_COMMAND_BASE. The ioctls - descriptors table is indexed by the ioctl number offset from the base - value. Drivers can use the DRM_IOCTL_DEF_DRV() macro to initialize the - table entries. - </para> - <para> - <programlisting>DRM_IOCTL_DEF_DRV(ioctl, func, flags)</programlisting> - <para> - <parameter>ioctl</parameter> is the ioctl name. Drivers must define - the DRM_##ioctl and DRM_IOCTL_##ioctl macros to the ioctl number - offset from DRM_COMMAND_BASE and the ioctl number respectively. The - first macro is private to the device while the second must be exposed - to userspace in a public header. - </para> - <para> - <parameter>func</parameter> is a pointer to the ioctl handler function - compatible with the <type>drm_ioctl_t</type> type. - <programlisting>typedef int drm_ioctl_t(struct drm_device *dev, void *data, - struct drm_file *file_priv);</programlisting> - </para> - <para> - <parameter>flags</parameter> is a bitmask combination of the following - values. It restricts how the ioctl is allowed to be called. - <itemizedlist> - <listitem><para> - DRM_AUTH - Only authenticated callers allowed - </para></listitem> - <listitem><para> - DRM_MASTER - The ioctl can only be called on the master file - handle - </para></listitem> - <listitem><para> - DRM_ROOT_ONLY - Only callers with the SYSADMIN capability allowed - </para></listitem> - <listitem><para> - DRM_CONTROL_ALLOW - The ioctl can only be called on a control - device - </para></listitem> - <listitem><para> - DRM_UNLOCKED - The ioctl handler will be called without locking - the DRM global mutex. This is the enforced default for kms drivers - (i.e. using the DRIVER_MODESET flag) and hence shouldn't be used - any more for new drivers. - </para></listitem> - </itemizedlist> - </para> - </para> -!Edrivers/gpu/drm/drm_ioctl.c - </sect2> - </sect1> - <sect1> - <title>Legacy Support Code</title> - <para> - The section very briefly covers some of the old legacy support code which - is only used by old DRM drivers which have done a so-called shadow-attach - to the underlying device instead of registering as a real driver. This - also includes some of the old generic buffer management and command - submission code. Do not use any of this in new and modern drivers. - </para> - - <sect2> - <title>Legacy Suspend/Resume</title> - <para> - The DRM core provides some suspend/resume code, but drivers wanting full - suspend/resume support should provide save() and restore() functions. - These are called at suspend, hibernate, or resume time, and should perform - any state save or restore required by your device across suspend or - hibernate states. - </para> - <synopsis>int (*suspend) (struct drm_device *, pm_message_t state); - int (*resume) (struct drm_device *);</synopsis> - <para> - Those are legacy suspend and resume methods which - <emphasis>only</emphasis> work with the legacy shadow-attach driver - registration functions. New driver should use the power management - interface provided by their bus type (usually through - the struct <structname>device_driver</structname> dev_pm_ops) and set - these methods to NULL. - </para> - </sect2> - - <sect2> - <title>Legacy DMA Services</title> - <para> - This should cover how DMA mapping etc. is supported by the core. - These functions are deprecated and should not be used. - </para> - </sect2> - </sect1> - </chapter> - -<!-- TODO - -- Add a glossary -- Document the struct_mutex catch-all lock -- Document connector properties - -- Why is the load method optional? -- What are drivers supposed to set the initial display state to, and how? - Connector's DPMS states are not initialized and are thus equal to - DRM_MODE_DPMS_ON. The fbcon compatibility layer calls - drm_helper_disable_unused_functions(), which disables unused encoders and - CRTCs, but doesn't touch the connectors' DPMS state, and - drm_helper_connector_dpms() in reaction to fbdev blanking events. Do drivers - that don't implement (or just don't use) fbcon compatibility need to call - those functions themselves? -- KMS drivers must call drm_vblank_pre_modeset() and drm_vblank_post_modeset() - around mode setting. Should this be done in the DRM core? -- vblank_disable_allowed is set to 1 in the first drm_vblank_post_modeset() - call and never set back to 0. It seems to be safe to permanently set it to 1 - in drm_vblank_init() for KMS driver, and it might be safe for UMS drivers as - well. This should be investigated. -- crtc and connector .save and .restore operations are only used internally in - drivers, should they be removed from the core? -- encoder mid-layer .save and .restore operations are only used internally in - drivers, should they be removed from the core? -- encoder mid-layer .detect operation is only used internally in drivers, - should it be removed from the core? ---> - - <!-- External interfaces --> - - <chapter id="drmExternals"> - <title>Userland interfaces</title> - <para> - The DRM core exports several interfaces to applications, - generally intended to be used through corresponding libdrm - wrapper functions. In addition, drivers export device-specific - interfaces for use by userspace drivers & device-aware - applications through ioctls and sysfs files. - </para> - <para> - External interfaces include: memory mapping, context management, - DMA operations, AGP management, vblank control, fence - management, memory management, and output management. - </para> - <para> - Cover generic ioctls and sysfs layout here. We only need high-level - info, since man pages should cover the rest. - </para> - - <!-- External: render nodes --> - - <sect1> - <title>Render nodes</title> - <para> - DRM core provides multiple character-devices for user-space to use. - Depending on which device is opened, user-space can perform a different - set of operations (mainly ioctls). The primary node is always created - and called card<num>. Additionally, a currently - unused control node, called controlD<num> is also - created. The primary node provides all legacy operations and - historically was the only interface used by userspace. With KMS, the - control node was introduced. However, the planned KMS control interface - has never been written and so the control node stays unused to date. - </para> - <para> - With the increased use of offscreen renderers and GPGPU applications, - clients no longer require running compositors or graphics servers to - make use of a GPU. But the DRM API required unprivileged clients to - authenticate to a DRM-Master prior to getting GPU access. To avoid this - step and to grant clients GPU access without authenticating, render - nodes were introduced. Render nodes solely serve render clients, that - is, no modesetting or privileged ioctls can be issued on render nodes. - Only non-global rendering commands are allowed. If a driver supports - render nodes, it must advertise it via the DRIVER_RENDER - DRM driver capability. If not supported, the primary node must be used - for render clients together with the legacy drmAuth authentication - procedure. - </para> - <para> - If a driver advertises render node support, DRM core will create a - separate render node called renderD<num>. There will - be one render node per device. No ioctls except PRIME-related ioctls - will be allowed on this node. Especially GEM_OPEN will be - explicitly prohibited. Render nodes are designed to avoid the - buffer-leaks, which occur if clients guess the flink names or mmap - offsets on the legacy interface. Additionally to this basic interface, - drivers must mark their driver-dependent render-only ioctls as - DRM_RENDER_ALLOW so render clients can use them. Driver - authors must be careful not to allow any privileged ioctls on render - nodes. - </para> - <para> - With render nodes, user-space can now control access to the render node - via basic file-system access-modes. A running graphics server which - authenticates clients on the privileged primary/legacy node is no longer - required. Instead, a client can open the render node and is immediately - granted GPU access. Communication between clients (or servers) is done - via PRIME. FLINK from render node to legacy node is not supported. New - clients must not use the insecure FLINK interface. - </para> - <para> - Besides dropping all modeset/global ioctls, render nodes also drop the - DRM-Master concept. There is no reason to associate render clients with - a DRM-Master as they are independent of any graphics server. Besides, - they must work without any running master, anyway. - Drivers must be able to run without a master object if they support - render nodes. If, on the other hand, a driver requires shared state - between clients which is visible to user-space and accessible beyond - open-file boundaries, they cannot support render nodes. - </para> - </sect1> - - <!-- External: vblank handling --> - - <sect1> - <title>VBlank event handling</title> - <para> - The DRM core exposes two vertical blank related ioctls: - <variablelist> - <varlistentry> - <term>DRM_IOCTL_WAIT_VBLANK</term> - <listitem> - <para> - This takes a struct drm_wait_vblank structure as its argument, - and it is used to block or request a signal when a specified - vblank event occurs. - </para> - </listitem> - </varlistentry> - <varlistentry> - <term>DRM_IOCTL_MODESET_CTL</term> - <listitem> - <para> - This was only used for user-mode-settind drivers around - modesetting changes to allow the kernel to update the vblank - interrupt after mode setting, since on many devices the vertical - blank counter is reset to 0 at some point during modeset. Modern - drivers should not call this any more since with kernel mode - setting it is a no-op. - </para> - </listitem> - </varlistentry> - </variablelist> - </para> - </sect1> - - </chapter> -</part> -<part id="drmDrivers"> - <title>DRM Drivers</title> - - <partintro> - <para> - This second part of the GPU Driver Developer's Guide documents driver - code, implementation details and also all the driver-specific userspace - interfaces. Especially since all hardware-acceleration interfaces to - userspace are driver specific for efficiency and other reasons these - interfaces can be rather substantial. Hence every driver has its own - chapter. - </para> - </partintro> - - <chapter id="drmI915"> - <title>drm/i915 Intel GFX Driver</title> - <para> - The drm/i915 driver supports all (with the exception of some very early - models) integrated GFX chipsets with both Intel display and rendering - blocks. This excludes a set of SoC platforms with an SGX rendering unit, - those have basic support through the gma500 drm driver. - </para> - <sect1> - <title>Core Driver Infrastructure</title> - <para> - This section covers core driver infrastructure used by both the display - and the GEM parts of the driver. - </para> - <sect2> - <title>Runtime Power Management</title> -!Pdrivers/gpu/drm/i915/intel_runtime_pm.c runtime pm -!Idrivers/gpu/drm/i915/intel_runtime_pm.c -!Idrivers/gpu/drm/i915/intel_uncore.c - </sect2> - <sect2> - <title>Interrupt Handling</title> -!Pdrivers/gpu/drm/i915/i915_irq.c interrupt handling -!Fdrivers/gpu/drm/i915/i915_irq.c intel_irq_init intel_irq_init_hw intel_hpd_init -!Fdrivers/gpu/drm/i915/i915_irq.c intel_runtime_pm_disable_interrupts -!Fdrivers/gpu/drm/i915/i915_irq.c intel_runtime_pm_enable_interrupts - </sect2> - <sect2> - <title>Intel GVT-g Guest Support(vGPU)</title> -!Pdrivers/gpu/drm/i915/i915_vgpu.c Intel GVT-g guest support -!Idrivers/gpu/drm/i915/i915_vgpu.c - </sect2> - </sect1> - <sect1> - <title>Display Hardware Handling</title> - <para> - This section covers everything related to the display hardware including - the mode setting infrastructure, plane, sprite and cursor handling and - display, output probing and related topics. - </para> - <sect2> - <title>Mode Setting Infrastructure</title> - <para> - The i915 driver is thus far the only DRM driver which doesn't use the - common DRM helper code to implement mode setting sequences. Thus it - has its own tailor-made infrastructure for executing a display - configuration change. - </para> - </sect2> - <sect2> - <title>Frontbuffer Tracking</title> -!Pdrivers/gpu/drm/i915/intel_frontbuffer.c frontbuffer tracking -!Idrivers/gpu/drm/i915/intel_frontbuffer.c -!Fdrivers/gpu/drm/i915/i915_gem.c i915_gem_track_fb - </sect2> - <sect2> - <title>Display FIFO Underrun Reporting</title> -!Pdrivers/gpu/drm/i915/intel_fifo_underrun.c fifo underrun handling -!Idrivers/gpu/drm/i915/intel_fifo_underrun.c - </sect2> - <sect2> - <title>Plane Configuration</title> - <para> - This section covers plane configuration and composition with the - primary plane, sprites, cursors and overlays. This includes the - infrastructure to do atomic vsync'ed updates of all this state and - also tightly coupled topics like watermark setup and computation, - framebuffer compression and panel self refresh. - </para> - </sect2> - <sect2> - <title>Atomic Plane Helpers</title> -!Pdrivers/gpu/drm/i915/intel_atomic_plane.c atomic plane helpers -!Idrivers/gpu/drm/i915/intel_atomic_plane.c - </sect2> - <sect2> - <title>Output Probing</title> - <para> - This section covers output probing and related infrastructure like the - hotplug interrupt storm detection and mitigation code. Note that the - i915 driver still uses most of the common DRM helper code for output - probing, so those sections fully apply. - </para> - </sect2> - <sect2> - <title>Hotplug</title> -!Pdrivers/gpu/drm/i915/intel_hotplug.c Hotplug -!Idrivers/gpu/drm/i915/intel_hotplug.c - </sect2> - <sect2> - <title>High Definition Audio</title> -!Pdrivers/gpu/drm/i915/intel_audio.c High Definition Audio over HDMI and Display Port -!Idrivers/gpu/drm/i915/intel_audio.c -!Iinclude/drm/i915_component.h - </sect2> - <sect2> - <title>Panel Self Refresh PSR (PSR/SRD)</title> -!Pdrivers/gpu/drm/i915/intel_psr.c Panel Self Refresh (PSR/SRD) -!Idrivers/gpu/drm/i915/intel_psr.c - </sect2> - <sect2> - <title>Frame Buffer Compression (FBC)</title> -!Pdrivers/gpu/drm/i915/intel_fbc.c Frame Buffer Compression (FBC) -!Idrivers/gpu/drm/i915/intel_fbc.c - </sect2> - <sect2> - <title>Display Refresh Rate Switching (DRRS)</title> -!Pdrivers/gpu/drm/i915/intel_dp.c Display Refresh Rate Switching (DRRS) -!Fdrivers/gpu/drm/i915/intel_dp.c intel_dp_set_drrs_state -!Fdrivers/gpu/drm/i915/intel_dp.c intel_edp_drrs_enable -!Fdrivers/gpu/drm/i915/intel_dp.c intel_edp_drrs_disable -!Fdrivers/gpu/drm/i915/intel_dp.c intel_edp_drrs_invalidate -!Fdrivers/gpu/drm/i915/intel_dp.c intel_edp_drrs_flush -!Fdrivers/gpu/drm/i915/intel_dp.c intel_dp_drrs_init - - </sect2> - <sect2> - <title>DPIO</title> -!Pdrivers/gpu/drm/i915/i915_reg.h DPIO - </sect2> - - <sect2> - <title>CSR firmware support for DMC</title> -!Pdrivers/gpu/drm/i915/intel_csr.c csr support for dmc -!Idrivers/gpu/drm/i915/intel_csr.c - </sect2> - <sect2> - <title>Video BIOS Table (VBT)</title> -!Pdrivers/gpu/drm/i915/intel_bios.c Video BIOS Table (VBT) -!Idrivers/gpu/drm/i915/intel_bios.c -!Idrivers/gpu/drm/i915/intel_vbt_defs.h - </sect2> - </sect1> - - <sect1> - <title>Memory Management and Command Submission</title> - <para> - This sections covers all things related to the GEM implementation in the - i915 driver. - </para> - <sect2> - <title>Batchbuffer Parsing</title> -!Pdrivers/gpu/drm/i915/i915_cmd_parser.c batch buffer command parser -!Idrivers/gpu/drm/i915/i915_cmd_parser.c - </sect2> - <sect2> - <title>Batchbuffer Pools</title> -!Pdrivers/gpu/drm/i915/i915_gem_batch_pool.c batch pool -!Idrivers/gpu/drm/i915/i915_gem_batch_pool.c - </sect2> - <sect2> - <title>Logical Rings, Logical Ring Contexts and Execlists</title> -!Pdrivers/gpu/drm/i915/intel_lrc.c Logical Rings, Logical Ring Contexts and Execlists -!Idrivers/gpu/drm/i915/intel_lrc.c - </sect2> - <sect2> - <title>Global GTT views</title> -!Pdrivers/gpu/drm/i915/i915_gem_gtt.c Global GTT views -!Idrivers/gpu/drm/i915/i915_gem_gtt.c - </sect2> - <sect2> - <title>GTT Fences and Swizzling</title> -!Idrivers/gpu/drm/i915/i915_gem_fence.c - <sect3> - <title>Global GTT Fence Handling</title> -!Pdrivers/gpu/drm/i915/i915_gem_fence.c fence register handling - </sect3> - <sect3> - <title>Hardware Tiling and Swizzling Details</title> -!Pdrivers/gpu/drm/i915/i915_gem_fence.c tiling swizzling details - </sect3> - </sect2> - <sect2> - <title>Object Tiling IOCTLs</title> -!Idrivers/gpu/drm/i915/i915_gem_tiling.c -!Pdrivers/gpu/drm/i915/i915_gem_tiling.c buffer object tiling - </sect2> - <sect2> - <title>Buffer Object Eviction</title> - <para> - This section documents the interface functions for evicting buffer - objects to make space available in the virtual gpu address spaces. - Note that this is mostly orthogonal to shrinking buffer objects - caches, which has the goal to make main memory (shared with the gpu - through the unified memory architecture) available. - </para> -!Idrivers/gpu/drm/i915/i915_gem_evict.c - </sect2> - <sect2> - <title>Buffer Object Memory Shrinking</title> - <para> - This section documents the interface function for shrinking memory - usage of buffer object caches. Shrinking is used to make main memory - available. Note that this is mostly orthogonal to evicting buffer - objects, which has the goal to make space in gpu virtual address - spaces. - </para> -!Idrivers/gpu/drm/i915/i915_gem_shrinker.c - </sect2> - </sect1> - <sect1> - <title>GuC</title> - <sect2> - <title>GuC-specific firmware loader</title> -!Pdrivers/gpu/drm/i915/intel_guc_loader.c GuC-specific firmware loader -!Idrivers/gpu/drm/i915/intel_guc_loader.c - </sect2> - <sect2> - <title>GuC-based command submission</title> -!Pdrivers/gpu/drm/i915/i915_guc_submission.c GuC-based command submission -!Idrivers/gpu/drm/i915/i915_guc_submission.c - </sect2> - <sect2> - <title>GuC Firmware Layout</title> -!Pdrivers/gpu/drm/i915/intel_guc_fwif.h GuC Firmware Layout - </sect2> - </sect1> - - <sect1> - <title> Tracing </title> - <para> - This sections covers all things related to the tracepoints implemented in - the i915 driver. - </para> - <sect2> - <title> i915_ppgtt_create and i915_ppgtt_release </title> -!Pdrivers/gpu/drm/i915/i915_trace.h i915_ppgtt_create and i915_ppgtt_release tracepoints - </sect2> - <sect2> - <title> i915_context_create and i915_context_free </title> -!Pdrivers/gpu/drm/i915/i915_trace.h i915_context_create and i915_context_free tracepoints - </sect2> - <sect2> - <title> switch_mm </title> -!Pdrivers/gpu/drm/i915/i915_trace.h switch_mm tracepoint - </sect2> - </sect1> - - </chapter> -!Cdrivers/gpu/drm/i915/i915_irq.c -</part> - -<part id="vga_switcheroo"> - <title>vga_switcheroo</title> - <partintro> -!Pdrivers/gpu/vga/vga_switcheroo.c Overview - </partintro> - - <chapter id="modes_of_use"> - <title>Modes of Use</title> - <sect1> - <title>Manual switching and manual power control</title> -!Pdrivers/gpu/vga/vga_switcheroo.c Manual switching and manual power control - </sect1> - <sect1> - <title>Driver power control</title> -!Pdrivers/gpu/vga/vga_switcheroo.c Driver power control - </sect1> - </chapter> - - <chapter id="api"> - <title>API</title> - <sect1> - <title>Public functions</title> -!Edrivers/gpu/vga/vga_switcheroo.c - </sect1> - <sect1> - <title>Public structures</title> -!Finclude/linux/vga_switcheroo.h vga_switcheroo_handler -!Finclude/linux/vga_switcheroo.h vga_switcheroo_client_ops - </sect1> - <sect1> - <title>Public constants</title> -!Finclude/linux/vga_switcheroo.h vga_switcheroo_handler_flags_t -!Finclude/linux/vga_switcheroo.h vga_switcheroo_client_id -!Finclude/linux/vga_switcheroo.h vga_switcheroo_state - </sect1> - <sect1> - <title>Private structures</title> -!Fdrivers/gpu/vga/vga_switcheroo.c vgasr_priv -!Fdrivers/gpu/vga/vga_switcheroo.c vga_switcheroo_client - </sect1> - </chapter> - - <chapter id="handlers"> - <title>Handlers</title> - <sect1> - <title>apple-gmux Handler</title> -!Pdrivers/platform/x86/apple-gmux.c Overview -!Pdrivers/platform/x86/apple-gmux.c Interrupt - <sect2> - <title>Graphics mux</title> -!Pdrivers/platform/x86/apple-gmux.c Graphics mux - </sect2> - <sect2> - <title>Power control</title> -!Pdrivers/platform/x86/apple-gmux.c Power control - </sect2> - <sect2> - <title>Backlight control</title> -!Pdrivers/platform/x86/apple-gmux.c Backlight control - </sect2> - <sect2> - <title>Public functions</title> -!Iinclude/linux/apple-gmux.h - </sect2> - </sect1> - </chapter> - -!Cdrivers/gpu/vga/vga_switcheroo.c -!Cinclude/linux/vga_switcheroo.h -!Cdrivers/platform/x86/apple-gmux.c -</part> - -</book> |