Documentation: convert USB to new format

This is a conversion of the USB documentation to the Sphinx format.
No content was altered or reformatted.

Signed-off-by: Oliver <oneukum@suse.com>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>

2 files changed, 1 insertions, 985 deletions

diff --git a/Documentation/DocBook/Makefile b/Documentation/DocBook/Makefile
index 263e6577de66..857b772e9da1 100644
--- a/Documentation/DocBook/Makefile
+++ b/Documentation/DocBook/Makefile
@@ -9,7 +9,7 @@
 DOCBOOKS := z8530book.xml  \
 	    kernel-hacking.xml kernel-locking.xml deviceiobook.xml \
 	    writing_usb_driver.xml networking.xml \
-	    kernel-api.xml filesystems.xml lsm.xml usb.xml kgdb.xml \
+	    kernel-api.xml filesystems.xml lsm.xml kgdb.xml \
 	    gadget.xml libata.xml mtdnand.xml librs.xml rapidio.xml \
 	    genericirq.xml s390-drivers.xml uio-howto.xml scsi.xml \
 	    debugobjects.xml sh.xml regulator.xml \
diff --git a/Documentation/DocBook/usb.tmpl b/Documentation/DocBook/usb.tmpl
deleted file mode 100644
index e322691be67e..000000000000
--- a/Documentation/DocBook/usb.tmpl
+++ /dev/null
@@ -1,984 +0,0 @@
-<?xml version="1.0" encoding="UTF-8"?>
-<!DOCTYPE book PUBLIC "-//OASIS//DTD DocBook XML V4.1.2//EN"
-	"http://www.oasis-open.org/docbook/xml/4.1.2/docbookx.dtd" []>
-
-<book id="Linux-USB-API">
- <bookinfo>
-  <title>The Linux-USB Host Side API</title>
-  
-  <legalnotice>
-   <para>
-     This documentation is free software; you can redistribute
-     it and/or modify it under the terms of the GNU General Public
-     License as published by the Free Software Foundation; either
-     version 2 of the License, or (at your option) any later
-     version.
-   </para>
-      
-   <para>
-     This program is distributed in the hope that it will be
-     useful, but WITHOUT ANY WARRANTY; without even the implied
-     warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
-     See the GNU General Public License for more details.
-   </para>
-      
-   <para>
-     You should have received a copy of the GNU General Public
-     License along with this program; if not, write to the Free
-     Software Foundation, Inc., 59 Temple Place, Suite 330, Boston,
-     MA 02111-1307 USA
-   </para>
-      
-   <para>
-     For more details see the file COPYING in the source
-     distribution of Linux.
-   </para>
-  </legalnotice>
- </bookinfo>
-
-<toc></toc>
-
-<chapter id="intro">
-    <title>Introduction to USB on Linux</title>
-
-    <para>A Universal Serial Bus (USB) is used to connect a host,
-    such as a PC or workstation, to a number of peripheral
-    devices.  USB uses a tree structure, with the host as the
-    root (the system's master), hubs as interior nodes, and
-    peripherals as leaves (and slaves).
-    Modern PCs support several such trees of USB devices, usually
-    a few USB 3.0 (5 GBit/s) or USB 3.1 (10 GBit/s) and some legacy
-    USB 2.0 (480 MBit/s) busses just in case.
-    </para>
-
-    <para>That master/slave asymmetry was designed-in for a number of
-    reasons, one being ease of use.  It is not physically possible to
-    mistake upstream and downstream or it does not matter with a type C
-    plug
-    (or they are built into the peripheral).
-    Also, the host software doesn't need to deal with distributed
-    auto-configuration since the pre-designated master node manages all that.
-    </para>
-
-    <para>Kernel developers added USB support to Linux early in the 2.2 kernel
-    series and have been developing it further since then. Besides support
-    for each new generation of USB, various host controllers gained support,
-    new drivers for peripherals have been added and advanced features for latency
-    measurement and improved power management introduced.
-    </para>
-
-    <para>Linux can run inside USB devices as well as on
-    the hosts that control the devices.
-    But USB device drivers running inside those peripherals
-    don't do the same things as the ones running inside hosts,
-    so they've been given a different name:
-    <emphasis>gadget drivers</emphasis>.
-    This document does not cover gadget drivers.
-    </para>
-
-    </chapter>
-
-<chapter id="host">
-    <title>USB Host-Side API Model</title>
-
-    <para>Host-side drivers for USB devices talk to the "usbcore" APIs.
-    There are two.  One is intended for
-    <emphasis>general-purpose</emphasis> drivers (exposed through
-    driver frameworks), and the other is for drivers that are
-    <emphasis>part of the core</emphasis>.
-    Such core drivers include the <emphasis>hub</emphasis> driver
-    (which manages trees of USB devices) and several different kinds
-    of <emphasis>host controller drivers</emphasis>,
-    which control individual busses.
-    </para>
-
-    <para>The device model seen by USB drivers is relatively complex.
-    </para>
-     
-    <itemizedlist>
-
-	<listitem><para>USB supports four kinds of data transfers
-	(control, bulk, interrupt, and isochronous).  Two of them (control
-	and bulk) use bandwidth as it's available,
-	while the other two (interrupt and isochronous)
-	are scheduled to provide guaranteed bandwidth.
-	</para></listitem>
-
-	<listitem><para>The device description model includes one or more
-	"configurations" per device, only one of which is active at a time.
-	Devices are supposed to be capable of operating at lower than their top
-	speeds and may provide a BOS descriptor showing the lowest speed they
-	remain fully operational at.
-	</para></listitem>
-
-	<listitem><para>From USB 3.0 on configurations have one or more "functions", which
-	provide a common functionality and are grouped together for purposes
-	of power management.
-	</para></listitem>
-
-	<listitem><para>Configurations or functions have one or more "interfaces", each
-	of which may have "alternate settings".  Interfaces may be
-	standardized by USB "Class" specifications, or may be specific to
-	a vendor or device.</para>
-
-	<para>USB device drivers actually bind to interfaces, not devices.
-	Think of them as "interface drivers", though you
-	may not see many devices where the distinction is important.
-	<emphasis>Most USB devices are simple, with only one configuration,
-	one function, one interface, and one alternate setting.</emphasis>
-	</para></listitem>
-
-	<listitem><para>Interfaces have one or more "endpoints", each of
-	which supports one type and direction of data transfer such as
-	"bulk out" or "interrupt in".  The entire configuration may have
-	up to sixteen endpoints in each direction, allocated as needed
-	among all the interfaces.
-	</para></listitem>
-
-	<listitem><para>Data transfer on USB is packetized; each endpoint
-	has a maximum packet size.
-	Drivers must often be aware of conventions such as flagging the end
-	of bulk transfers using "short" (including zero length) packets.
-	</para></listitem>
-
-	<listitem><para>The Linux USB API supports synchronous calls for
-	control and bulk messages.
-	It also supports asynchronous calls for all kinds of data transfer,
-	using request structures called "URBs" (USB Request Blocks).
-	</para></listitem>
-
-    </itemizedlist>
-
-    <para>Accordingly, the USB Core API exposed to device drivers
-    covers quite a lot of territory.  You'll probably need to consult
-    the USB 3.0 specification, available online from www.usb.org at
-    no cost, as well as class or device specifications.
-    </para>
-
-    <para>The only host-side drivers that actually touch hardware
-    (reading/writing registers, handling IRQs, and so on) are the HCDs.
-    In theory, all HCDs provide the same functionality through the same
-    API.  In practice, that's becoming mostly true,
-    but there are still differences that crop up especially with
-    fault handling on the less common controllers.
-    Different controllers don't necessarily report
-    the same aspects of failures, and recovery from faults (including
-    software-induced ones like unlinking an URB) isn't yet fully
-    consistent.
-    Device driver authors should make a point of doing disconnect
-    testing (while the device is active) with each different host
-    controller driver, to make sure drivers don't have bugs of
-    their own as well as to make sure they aren't relying on some
-    HCD-specific behavior.
-    </para>
-
-    </chapter>
-
-<chapter id="types"><title>USB-Standard Types</title>
-
-    <para>In <filename>&lt;linux/usb/ch9.h&gt;</filename> you will find
-    the USB data types defined in chapter 9 of the USB specification.
-    These data types are used throughout USB, and in APIs including
-    this host side API, gadget APIs, and usbfs.
-    </para>
-
-!Iinclude/linux/usb/ch9.h
-
-    </chapter>
-
-<chapter id="hostside"><title>Host-Side Data Types and Macros</title>
-
-    <para>The host side API exposes several layers to drivers, some of
-    which are more necessary than others.
-    These support lifecycle models for host side drivers
-    and devices, and support passing buffers through usbcore to
-    some HCD that performs the I/O for the device driver.
-    </para>
-
-
-!Iinclude/linux/usb.h
-
-    </chapter>
-
-    <chapter id="usbcore"><title>USB Core APIs</title>
-
-    <para>There are two basic I/O models in the USB API.
-    The most elemental one is asynchronous:  drivers submit requests
-    in the form of an URB, and the URB's completion callback
-    handles the next step.
-    All USB transfer types support that model, although there
-    are special cases for control URBs (which always have setup
-    and status stages, but may not have a data stage) and
-    isochronous URBs (which allow large packets and include
-    per-packet fault reports).
-    Built on top of that is synchronous API support, where a
-    driver calls a routine that allocates one or more URBs,
-    submits them, and waits until they complete.
-    There are synchronous wrappers for single-buffer control
-    and bulk transfers (which are awkward to use in some
-    driver disconnect scenarios), and for scatterlist based
-    streaming i/o (bulk or interrupt).
-    </para>
-
-    <para>USB drivers need to provide buffers that can be
-    used for DMA, although they don't necessarily need to
-    provide the DMA mapping themselves.
-    There are APIs to use used when allocating DMA buffers,
-    which can prevent use of bounce buffers on some systems.
-    In some cases, drivers may be able to rely on 64bit DMA
-    to eliminate another kind of bounce buffer.
-    </para>
-
-!Edrivers/usb/core/urb.c
-!Edrivers/usb/core/message.c
-!Edrivers/usb/core/file.c
-!Edrivers/usb/core/driver.c
-!Edrivers/usb/core/usb.c
-!Edrivers/usb/core/hub.c
-    </chapter>
-
-    <chapter id="hcd"><title>Host Controller APIs</title>
-
-    <para>These APIs are only for use by host controller drivers,
-    most of which implement standard register interfaces such as
-    XHCI, EHCI, OHCI, or UHCI.
-    UHCI was one of the first interfaces, designed by Intel and
-    also used by VIA; it doesn't do much in hardware.
-    OHCI was designed later, to have the hardware do more work
-    (bigger transfers, tracking protocol state, and so on).
-    EHCI was designed with USB 2.0; its design has features that
-    resemble OHCI (hardware does much more work) as well as
-    UHCI (some parts of ISO support, TD list processing).
-    XHCI was designed with USB 3.0. It continues to shift support
-    for functionality into hardware.
-    </para>
-
-    <para>There are host controllers other than the "big three",
-    although most PCI based controllers (and a few non-PCI based
-    ones) use one of those interfaces.
-    Not all host controllers use DMA; some use PIO, and there
-    is also a simulator and a virtual host controller to pipe
-    USB over the network.
-    </para>
-
-    <para>The same basic APIs are available to drivers for all
-    those controllers.  
-    For historical reasons they are in two layers:
-    <structname>struct usb_bus</structname> is a rather thin
-    layer that became available in the 2.2 kernels, while
-    <structname>struct usb_hcd</structname> is a more featureful
-    layer that
-    lets HCDs share common code, to shrink driver size
-    and significantly reduce hcd-specific behaviors.
-    </para>
-
-!Edrivers/usb/core/hcd.c
-!Edrivers/usb/core/hcd-pci.c
-!Idrivers/usb/core/buffer.c
-    </chapter>
-
-    <chapter id="usbfs">
-	<title>The USB Filesystem (usbfs)</title>
-
-	<para>This chapter presents the Linux <emphasis>usbfs</emphasis>.
-	You may prefer to avoid writing new kernel code for your
-	USB driver; that's the problem that usbfs set out to solve.
-	User mode device drivers are usually packaged as applications
-	or libraries, and may use usbfs through some programming library
-	that wraps it.  Such libraries include
-	<ulink url="http://libusb.sourceforge.net">libusb</ulink>
-	for C/C++, and
-	<ulink url="http://jUSB.sourceforge.net">jUSB</ulink> for Java.
-	</para>
-
-	<note><title>Unfinished</title>
-	    <para>This particular documentation is incomplete,
-	    especially with respect to the asynchronous mode.
-	    As of kernel 2.5.66 the code and this (new) documentation
-	    need to be cross-reviewed.
-	    </para>
-	    </note>
-
-	<para>Configure usbfs into Linux kernels by enabling the
-	<emphasis>USB filesystem</emphasis> option (CONFIG_USB_DEVICEFS),
-	and you get basic support for user mode USB device drivers.
-	Until relatively recently it was often (confusingly) called
-	<emphasis>usbdevfs</emphasis> although it wasn't solving what
-	<emphasis>devfs</emphasis> was.
-	Every USB device will appear in usbfs, regardless of whether or
-	not it has a kernel driver.
-	</para>
-
-	<sect1 id="usbfs-files">
-	    <title>What files are in "usbfs"?</title>
-
-	    <para>Conventionally mounted at
-	    <filename>/proc/bus/usb</filename>, usbfs 
-	    features include:
-	    <itemizedlist>
-		<listitem><para><filename>/proc/bus/usb/devices</filename>
-		    ... a text file
-		    showing each of the USB devices on known to the kernel,
-		    and their configuration descriptors.
-		    You can also poll() this to learn about new devices.
-		    </para></listitem>
-		<listitem><para><filename>/proc/bus/usb/BBB/DDD</filename>
-		    ... magic files
-		    exposing the each device's configuration descriptors, and
-		    supporting a series of ioctls for making device requests,
-		    including I/O to devices.  (Purely for access by programs.)
-		    </para></listitem>
-	    </itemizedlist>
-	    </para>
-
-	    <para> Each bus is given a number (BBB) based on when it was
-	    enumerated; within each bus, each device is given a similar
-	    number (DDD).
-	    Those BBB/DDD paths are not "stable" identifiers;
-	    expect them to change even if you always leave the devices
-	    plugged in to the same hub port.
-	    <emphasis>Don't even think of saving these in application
-	    configuration files.</emphasis>
-	    Stable identifiers are available, for user mode applications
-	    that want to use them.  HID and networking devices expose
-	    these stable IDs, so that for example you can be sure that
-	    you told the right UPS to power down its second server.
-	    "usbfs" doesn't (yet) expose those IDs.
-	    </para>
-
-	</sect1>
-
-	<sect1 id="usbfs-fstab">
-	    <title>Mounting and Access Control</title>
-
-	    <para>There are a number of mount options for usbfs, which will
-	    be of most interest to you if you need to override the default
-	    access control policy.
-	    That policy is that only root may read or write device files
-	    (<filename>/proc/bus/BBB/DDD</filename>) although anyone may read
-	    the <filename>devices</filename>
-	    or <filename>drivers</filename> files.
-	    I/O requests to the device also need the CAP_SYS_RAWIO capability,
-	    </para>
-
-	    <para>The significance of that is that by default, all user mode
-	    device drivers need super-user privileges.
-	    You can change modes or ownership in a driver setup
-	    when the device hotplugs, or maye just start the
-	    driver right then, as a privileged server (or some activity
-	    within one).
-	    That's the most secure approach for multi-user systems,
-	    but for single user systems ("trusted" by that user)
-	    it's more convenient just to grant everyone all access
-	    (using the <emphasis>devmode=0666</emphasis> option)
-	    so the driver can start whenever it's needed.
-	    </para>
-
-	    <para>The mount options for usbfs, usable in /etc/fstab or
-	    in command line invocations of <emphasis>mount</emphasis>, are:
-
-	    <variablelist>
-		<varlistentry>
-		    <term><emphasis>busgid</emphasis>=NNNNN</term>
-		    <listitem><para>Controls the GID used for the
-		    /proc/bus/usb/BBB
-		    directories.  (Default: 0)</para></listitem></varlistentry>
-		<varlistentry><term><emphasis>busmode</emphasis>=MMM</term>
-		    <listitem><para>Controls the file mode used for the
-		    /proc/bus/usb/BBB
-		    directories.  (Default: 0555)
-		    </para></listitem></varlistentry>
-		<varlistentry><term><emphasis>busuid</emphasis>=NNNNN</term>
-		    <listitem><para>Controls the UID used for the
-		    /proc/bus/usb/BBB
-		    directories.  (Default: 0)</para></listitem></varlistentry>
-
-		<varlistentry><term><emphasis>devgid</emphasis>=NNNNN</term>
-		    <listitem><para>Controls the GID used for the
-		    /proc/bus/usb/BBB/DDD
-		    files.  (Default: 0)</para></listitem></varlistentry>
-		<varlistentry><term><emphasis>devmode</emphasis>=MMM</term>
-		    <listitem><para>Controls the file mode used for the
-		    /proc/bus/usb/BBB/DDD
-		    files.  (Default: 0644)</para></listitem></varlistentry>
-		<varlistentry><term><emphasis>devuid</emphasis>=NNNNN</term>
-		    <listitem><para>Controls the UID used for the
-		    /proc/bus/usb/BBB/DDD
-		    files.  (Default: 0)</para></listitem></varlistentry>
-
-		<varlistentry><term><emphasis>listgid</emphasis>=NNNNN</term>
-		    <listitem><para>Controls the GID used for the
-		    /proc/bus/usb/devices and drivers files.
-		    (Default: 0)</para></listitem></varlistentry>
-		<varlistentry><term><emphasis>listmode</emphasis>=MMM</term>
-		    <listitem><para>Controls the file mode used for the
-		    /proc/bus/usb/devices and drivers files.
-		    (Default: 0444)</para></listitem></varlistentry>
-		<varlistentry><term><emphasis>listuid</emphasis>=NNNNN</term>
-		    <listitem><para>Controls the UID used for the
-		    /proc/bus/usb/devices and drivers files.
-		    (Default: 0)</para></listitem></varlistentry>
-	    </variablelist>
-
-	    </para>
-
-	    <para>Note that many Linux distributions hard-wire the mount options
-	    for usbfs in their init scripts, such as
-	    <filename>/etc/rc.d/rc.sysinit</filename>,
-	    rather than making it easy to set this per-system
-	    policy in <filename>/etc/fstab</filename>.
-	    </para>
-
-	</sect1>
-
-	<sect1 id="usbfs-devices">
-	    <title>/proc/bus/usb/devices</title>
-
-	    <para>This file is handy for status viewing tools in user
-	    mode, which can scan the text format and ignore most of it.
-	    More detailed device status (including class and vendor
-	    status) is available from device-specific files.
-	    For information about the current format of this file,
-	    see the
-	    <filename>Documentation/usb/proc_usb_info.txt</filename>
-	    file in your Linux kernel sources.
-	    </para>
-
-	    <para>This file, in combination with the poll() system call, can
-	    also be used to detect when devices are added or removed:
-<programlisting>int fd;
-struct pollfd pfd;
-
-fd = open("/proc/bus/usb/devices", O_RDONLY);
-pfd = { fd, POLLIN, 0 };
-for (;;) {
-	/* The first time through, this call will return immediately. */
-	poll(&amp;pfd, 1, -1);
-
-	/* To see what's changed, compare the file's previous and current
-	   contents or scan the filesystem.  (Scanning is more precise.) */
-}</programlisting>
-	    Note that this behavior is intended to be used for informational
-	    and debug purposes.  It would be more appropriate to use programs
-	    such as udev or HAL to initialize a device or start a user-mode
-	    helper program, for instance.
-	    </para>
-	</sect1>
-
-	<sect1 id="usbfs-bbbddd">
-	    <title>/proc/bus/usb/BBB/DDD</title>
-
-	    <para>Use these files in one of these basic ways:
-	    </para>
-
-	    <para><emphasis>They can be read,</emphasis>
-	    producing first the device descriptor
-	    (18 bytes) and then the descriptors for the current configuration.
-	    See the USB 2.0 spec for details about those binary data formats.
-	    You'll need to convert most multibyte values from little endian
-	    format to your native host byte order, although a few of the
-	    fields in the device descriptor (both of the BCD-encoded fields,
-	    and the vendor and product IDs) will be byteswapped for you.
-	    Note that configuration descriptors include descriptors for
-	    interfaces, altsettings, endpoints, and maybe additional
-	    class descriptors.
-	    </para>
-
-	    <para><emphasis>Perform USB operations</emphasis> using 
-	    <emphasis>ioctl()</emphasis> requests to make endpoint I/O
-	    requests (synchronously or asynchronously) or manage
-	    the device.
-	    These requests need the CAP_SYS_RAWIO capability,
-	    as well as filesystem access permissions.
-	    Only one ioctl request can be made on one of these
-	    device files at a time.
-	    This means that if you are synchronously reading an endpoint
-	    from one thread, you won't be able to write to a different
-	    endpoint from another thread until the read completes.
-	    This works for <emphasis>half duplex</emphasis> protocols,
-	    but otherwise you'd use asynchronous i/o requests. 
-	    </para>
-
-	    </sect1>
-
-
-	<sect1 id="usbfs-lifecycle">
-	    <title>Life Cycle of User Mode Drivers</title>
-
-	    <para>Such a driver first needs to find a device file
-	    for a device it knows how to handle.
-	    Maybe it was told about it because a
-	    <filename>/sbin/hotplug</filename> event handling agent
-	    chose that driver to handle the new device.
-	    Or maybe it's an application that scans all the
-	    /proc/bus/usb device files, and ignores most devices.
-	    In either case, it should <function>read()</function> all
-	    the descriptors from the device file,
-	    and check them against what it knows how to handle.
-	    It might just reject everything except a particular
-	    vendor and product ID, or need a more complex policy.
-	    </para>
-
-	    <para>Never assume there will only be one such device
-	    on the system at a time!
-	    If your code can't handle more than one device at
-	    a time, at least detect when there's more than one, and
-	    have your users choose which device to use.
-	    </para>
-
-	    <para>Once your user mode driver knows what device to use,
-	    it interacts with it in either of two styles.
-	    The simple style is to make only control requests; some
-	    devices don't need more complex interactions than those.
-	    (An example might be software using vendor-specific control
-	    requests for some initialization or configuration tasks,
-	    with a kernel driver for the rest.)
-	    </para>
-
-	    <para>More likely, you need a more complex style driver:
-	    one using non-control endpoints, reading or writing data
-	    and claiming exclusive use of an interface.
-	    <emphasis>Bulk</emphasis> transfers are easiest to use,
-	    but only their sibling <emphasis>interrupt</emphasis> transfers 
-	    work with low speed devices.
-	    Both interrupt and <emphasis>isochronous</emphasis> transfers
-	    offer service guarantees because their bandwidth is reserved.
-	    Such "periodic" transfers are awkward to use through usbfs,
-	    unless you're using the asynchronous calls.  However, interrupt
-	    transfers can also be used in a synchronous "one shot" style.
-	    </para>
-
-	    <para>Your user-mode driver should never need to worry
-	    about cleaning up request state when the device is
-	    disconnected, although it should close its open file
-	    descriptors as soon as it starts seeing the ENODEV
-	    errors.
-	    </para>
-
-	    </sect1>
-
-	<sect1 id="usbfs-ioctl"><title>The ioctl() Requests</title>
-
-	    <para>To use these ioctls, you need to include the following
-	    headers in your userspace program:
-<programlisting>#include &lt;linux/usb.h&gt;
-#include &lt;linux/usbdevice_fs.h&gt;
-#include &lt;asm/byteorder.h&gt;</programlisting>
-	    The standard USB device model requests, from "Chapter 9" of
-	    the USB 2.0 specification, are automatically included from
-	    the <filename>&lt;linux/usb/ch9.h&gt;</filename> header.
-	    </para>
-
-	    <para>Unless noted otherwise, the ioctl requests
-	    described here will
-	    update the modification time on the usbfs file to which
-	    they are applied (unless they fail).
-	    A return of zero indicates success; otherwise, a
-	    standard USB error code is returned.  (These are
-	    documented in
-	    <filename>Documentation/usb/error-codes.txt</filename>
-	    in your kernel sources.)
-	    </para>
-
-	    <para>Each of these files multiplexes access to several
-	    I/O streams, one per endpoint.
-	    Each device has one control endpoint (endpoint zero)
-	    which supports a limited RPC style RPC access.
-	    Devices are configured
-	    by hub_wq (in the kernel) setting a device-wide
-	    <emphasis>configuration</emphasis> that affects things
-	    like power consumption and basic functionality.
-	    The endpoints are part of USB <emphasis>interfaces</emphasis>,
-	    which may have <emphasis>altsettings</emphasis>
-	    affecting things like which endpoints are available.
-	    Many devices only have a single configuration and interface,
-	    so drivers for them will ignore configurations and altsettings.
-	    </para>
-
-
-	    <sect2 id="usbfs-mgmt">
-		<title>Management/Status Requests</title>
-
-		<para>A number of usbfs requests don't deal very directly
-		with device I/O.
-		They mostly relate to device management and status.
-		These are all synchronous requests.
-		</para>
-
-		<variablelist>
-
-		<varlistentry><term>USBDEVFS_CLAIMINTERFACE</term>
-		    <listitem><para>This is used to force usbfs to
-		    claim a specific interface,
-		    which has not previously been claimed by usbfs or any other
-		    kernel driver.
-		    The ioctl parameter is an integer holding the number of
-		    the interface (bInterfaceNumber from descriptor).
-		    </para><para>
-		    Note that if your driver doesn't claim an interface
-		    before trying to use one of its endpoints, and no
-		    other driver has bound to it, then the interface is
-		    automatically claimed by usbfs.
-		    </para><para>
-		    This claim will be released by a RELEASEINTERFACE ioctl,
-		    or by closing the file descriptor.
-		    File modification time is not updated by this request.
-		    </para></listitem></varlistentry>
-
-		<varlistentry><term>USBDEVFS_CONNECTINFO</term>
-		    <listitem><para>Says whether the device is lowspeed.
-		    The ioctl parameter points to a structure like this:
-<programlisting>struct usbdevfs_connectinfo {
-        unsigned int   devnum;
-        unsigned char  slow;
-}; </programlisting>
-		    File modification time is not updated by this request.
-		    </para><para>
-		    <emphasis>You can't tell whether a "not slow"
-		    device is connected at high speed (480 MBit/sec)
-		    or just full speed (12 MBit/sec).</emphasis>
-		    You should know the devnum value already,
-		    it's the DDD value of the device file name.
-		    </para></listitem></varlistentry>
-
-		<varlistentry><term>USBDEVFS_GETDRIVER</term>
-		    <listitem><para>Returns the name of the kernel driver
-		    bound to a given interface (a string).  Parameter
-		    is a pointer to this structure, which is modified:
-<programlisting>struct usbdevfs_getdriver {
-        unsigned int  interface;
-        char          driver[USBDEVFS_MAXDRIVERNAME + 1];
-};</programlisting>
-		    File modification time is not updated by this request.
-		    </para></listitem></varlistentry>
-
-		<varlistentry><term>USBDEVFS_IOCTL</term>
-		    <listitem><para>Passes a request from userspace through
-		    to a kernel driver that has an ioctl entry in the
-		    <emphasis>struct usb_driver</emphasis> it registered.
-<programlisting>struct usbdevfs_ioctl {
-        int     ifno;
-        int     ioctl_code;
-        void    *data;
-};
-
-/* user mode call looks like this.
- * 'request' becomes the driver->ioctl() 'code' parameter.
- * the size of 'param' is encoded in 'request', and that data
- * is copied to or from the driver->ioctl() 'buf' parameter.
- */
-static int
-usbdev_ioctl (int fd, int ifno, unsigned request, void *param)
-{
-        struct usbdevfs_ioctl	wrapper;
-
-        wrapper.ifno = ifno;
-        wrapper.ioctl_code = request;
-        wrapper.data = param;
-
-        return ioctl (fd, USBDEVFS_IOCTL, &amp;wrapper);
-} </programlisting>
-		    File modification time is not updated by this request.
-		    </para><para>
-		    This request lets kernel drivers talk to user mode code
-		    through filesystem operations even when they don't create
-		    a character or block special device.
-		    It's also been used to do things like ask devices what
-		    device special file should be used.
-		    Two pre-defined ioctls are used
-		    to disconnect and reconnect kernel drivers, so
-		    that user mode code can completely manage binding
-		    and configuration of devices.
-		    </para></listitem></varlistentry>
-
-		<varlistentry><term>USBDEVFS_RELEASEINTERFACE</term>
-		    <listitem><para>This is used to release the claim usbfs
-		    made on interface, either implicitly or because of a
-		    USBDEVFS_CLAIMINTERFACE call, before the file
-		    descriptor is closed.
-		    The ioctl parameter is an integer holding the number of
-		    the interface (bInterfaceNumber from descriptor);
-		    File modification time is not updated by this request.
-		    </para><warning><para>
-		    <emphasis>No security check is made to ensure
-		    that the task which made the claim is the one
-		    which is releasing it.
-		    This means that user mode driver may interfere
-		    other ones.  </emphasis>
-		    </para></warning></listitem></varlistentry>
-
-		<varlistentry><term>USBDEVFS_RESETEP</term>
-		    <listitem><para>Resets the data toggle value for an endpoint
-		    (bulk or interrupt) to DATA0.
-		    The ioctl parameter is an integer endpoint number
-		    (1 to 15, as identified in the endpoint descriptor),
-		    with USB_DIR_IN added if the device's endpoint sends
-		    data to the host.
-		    </para><warning><para>
-		    <emphasis>Avoid using this request.
-		    It should probably be removed.</emphasis>
-		    Using it typically means the device and driver will lose
-		    toggle synchronization.  If you really lost synchronization,
-		    you likely need to completely handshake with the device,
-		    using a request like CLEAR_HALT
-		    or SET_INTERFACE.
-		    </para></warning></listitem></varlistentry>
-
-		<varlistentry><term>USBDEVFS_DROP_PRIVILEGES</term>
-		    <listitem><para>This is used to relinquish the ability
-		    to do certain operations which are considered to be
-		    privileged on a usbfs file descriptor.
-		    This includes claiming arbitrary interfaces, resetting
-		    a device on which there are currently claimed interfaces
-		    from other users, and issuing USBDEVFS_IOCTL calls.
-		    The ioctl parameter is a 32 bit mask of interfaces
-		    the user is allowed to claim on this file descriptor.
-		    You may issue this ioctl more than one time to narrow
-		    said mask.
-		    </para></listitem></varlistentry>
-		</variablelist>
-
-		</sect2>
-
-	    <sect2 id="usbfs-sync">
-		<title>Synchronous I/O Support</title>
-
-		<para>Synchronous requests involve the kernel blocking
-		until the user mode request completes, either by
-		finishing successfully or by reporting an error.
-		In most cases this is the simplest way to use usbfs,
-		although as noted above it does prevent performing I/O
-		to more than one endpoint at a time.
-		</para>
-
-		<variablelist>
-
-		<varlistentry><term>USBDEVFS_BULK</term>
-		    <listitem><para>Issues a bulk read or write request to the
-		    device.
-		    The ioctl parameter is a pointer to this structure:
-<programlisting>struct usbdevfs_bulktransfer {
-        unsigned int  ep;
-        unsigned int  len;
-        unsigned int  timeout; /* in milliseconds */
-        void          *data;
-};</programlisting>
-		    </para><para>The "ep" value identifies a
-		    bulk endpoint number (1 to 15, as identified in an endpoint
-		    descriptor),
-		    masked with USB_DIR_IN when referring to an endpoint which
-		    sends data to the host from the device.
-		    The length of the data buffer is identified by "len";
-		    Recent kernels support requests up to about 128KBytes.
-		    <emphasis>FIXME say how read length is returned,
-		    and how short reads are handled.</emphasis>.
-		    </para></listitem></varlistentry>
-
-		<varlistentry><term>USBDEVFS_CLEAR_HALT</term>
-		    <listitem><para>Clears endpoint halt (stall) and
-		    resets the endpoint toggle.  This is only
-		    meaningful for bulk or interrupt endpoints.
-		    The ioctl parameter is an integer endpoint number
-		    (1 to 15, as identified in an endpoint descriptor),
-		    masked with USB_DIR_IN when referring to an endpoint which
-		    sends data to the host from the device.
-		    </para><para>
-		    Use this on bulk or interrupt endpoints which have
-		    stalled, returning <emphasis>-EPIPE</emphasis> status
-		    to a data transfer request.
-		    Do not issue the control request directly, since
-		    that could invalidate the host's record of the
-		    data toggle.
-		    </para></listitem></varlistentry>
-
-		<varlistentry><term>USBDEVFS_CONTROL</term>
-		    <listitem><para>Issues a control request to the device.
-		    The ioctl parameter points to a structure like this:
-<programlisting>struct usbdevfs_ctrltransfer {
-        __u8   bRequestType;
-        __u8   bRequest;
-        __u16  wValue;
-        __u16  wIndex;
-        __u16  wLength;
-        __u32  timeout;  /* in milliseconds */
-        void   *data;
-};</programlisting>
-		    </para><para>
-		    The first eight bytes of this structure are the contents
-		    of the SETUP packet to be sent to the device; see the
-		    USB 2.0 specification for details.
-		    The bRequestType value is composed by combining a
-		    USB_TYPE_* value, a USB_DIR_* value, and a
-		    USB_RECIP_* value (from
-		    <emphasis>&lt;linux/usb.h&gt;</emphasis>).
-		    If wLength is nonzero, it describes the length of the data
-		    buffer, which is either written to the device
-		    (USB_DIR_OUT) or read from the device (USB_DIR_IN).
-		    </para><para>
-		    At this writing, you can't transfer more than 4 KBytes
-		    of data to or from a device; usbfs has a limit, and
-		    some host controller drivers have a limit.
-		    (That's not usually a problem.)
-		    <emphasis>Also</emphasis> there's no way to say it's
-		    not OK to get a short read back from the device.
-		    </para></listitem></varlistentry>
-
-		<varlistentry><term>USBDEVFS_RESET</term>
-		    <listitem><para>Does a USB level device reset.
-		    The ioctl parameter is ignored.
-		    After the reset, this rebinds all device interfaces.
-		    File modification time is not updated by this request.
-		    </para><warning><para>
-		    <emphasis>Avoid using this call</emphasis>
-		    until some usbcore bugs get fixed,
-		    since it does not fully synchronize device, interface,
-		    and driver (not just usbfs) state.
-		    </para></warning></listitem></varlistentry>
-	    
-		<varlistentry><term>USBDEVFS_SETINTERFACE</term>
-		    <listitem><para>Sets the alternate setting for an
-		    interface.  The ioctl parameter is a pointer to a
-		    structure like this:
-<programlisting>struct usbdevfs_setinterface {
-        unsigned int  interface;
-        unsigned int  altsetting;
-}; </programlisting>
-		    File modification time is not updated by this request.
-		    </para><para>
-		    Those struct members are from some interface descriptor
-		    applying to the current configuration.
-		    The interface number is the bInterfaceNumber value, and
-		    the altsetting number is the bAlternateSetting value.
-		    (This resets each endpoint in the interface.)
-		    </para></listitem></varlistentry>
-
-		<varlistentry><term>USBDEVFS_SETCONFIGURATION</term>
-		    <listitem><para>Issues the
-		    <function>usb_set_configuration</function> call
-		    for the device.
-		    The parameter is an integer holding the number of
-		    a configuration (bConfigurationValue from descriptor).
-		    File modification time is not updated by this request.
-		    </para><warning><para>
-		    <emphasis>Avoid using this call</emphasis>
-		    until some usbcore bugs get fixed,
-		    since it does not fully synchronize device, interface,
-		    and driver (not just usbfs) state.
-		    </para></warning></listitem></varlistentry>
-
-		</variablelist>
-	    </sect2>
-
-	    <sect2 id="usbfs-async">
-		<title>Asynchronous I/O Support</title>
-
-		<para>As mentioned above, there are situations where it may be
-		important to initiate concurrent operations from user mode code.
-		This is particularly important for periodic transfers
-		(interrupt and isochronous), but it can be used for other
-		kinds of USB requests too.
-		In such cases, the asynchronous requests described here
-		are essential.  Rather than submitting one request and having
-		the kernel block until it completes, the blocking is separate.
-		</para>
-
-		<para>These requests are packaged into a structure that
-		resembles the URB used by kernel device drivers.
-		(No POSIX Async I/O support here, sorry.)
-		It identifies the endpoint type (USBDEVFS_URB_TYPE_*),
-		endpoint (number, masked with USB_DIR_IN as appropriate),
-		buffer and length, and a user "context" value serving to
-		uniquely identify each request.
-		(It's usually a pointer to per-request data.)
-		Flags can modify requests (not as many as supported for
-		kernel drivers).
-		</para>
-
-		<para>Each request can specify a realtime signal number
-		(between SIGRTMIN and SIGRTMAX, inclusive) to request a
-		signal be sent when the request completes.
-		</para>
-
-		<para>When usbfs returns these urbs, the status value
-		is updated, and the buffer may have been modified.
-		Except for isochronous transfers, the actual_length is
-		updated to say how many bytes were transferred; if the
-		USBDEVFS_URB_DISABLE_SPD flag is set
-		("short packets are not OK"), if fewer bytes were read
-		than were requested then you get an error report.
-		</para>
-
-<programlisting>struct usbdevfs_iso_packet_desc {
-        unsigned int                     length;
-        unsigned int                     actual_length;
-        unsigned int                     status;
-};
-
-struct usbdevfs_urb {
-        unsigned char                    type;
-        unsigned char                    endpoint;
-        int                              status;
-        unsigned int                     flags;
-        void                             *buffer;
-        int                              buffer_length;
-        int                              actual_length;
-        int                              start_frame;
-        int                              number_of_packets;
-        int                              error_count;
-        unsigned int                     signr;
-        void                             *usercontext;
-        struct usbdevfs_iso_packet_desc  iso_frame_desc[];
-};</programlisting>
-
-		<para> For these asynchronous requests, the file modification
-		time reflects when the request was initiated.
-		This contrasts with their use with the synchronous requests,
-		where it reflects when requests complete.
-		</para>
-
-		<variablelist>
-
-		<varlistentry><term>USBDEVFS_DISCARDURB</term>
-		    <listitem><para>
-		    <emphasis>TBS</emphasis>
-		    File modification time is not updated by this request.
-		    </para><para>
-		    </para></listitem></varlistentry>
-
-		<varlistentry><term>USBDEVFS_DISCSIGNAL</term>
-		    <listitem><para>
-		    <emphasis>TBS</emphasis>
-		    File modification time is not updated by this request.
-		    </para><para>
-		    </para></listitem></varlistentry>
-
-		<varlistentry><term>USBDEVFS_REAPURB</term>
-		    <listitem><para>
-		    <emphasis>TBS</emphasis>
-		    File modification time is not updated by this request.
-		    </para><para>
-		    </para></listitem></varlistentry>
-
-		<varlistentry><term>USBDEVFS_REAPURBNDELAY</term>
-		    <listitem><para>
-		    <emphasis>TBS</emphasis>
-		    File modification time is not updated by this request.
-		    </para><para>
-		    </para></listitem></varlistentry>
-
-		<varlistentry><term>USBDEVFS_SUBMITURB</term>
-		    <listitem><para>
-		    <emphasis>TBS</emphasis>
-		    </para><para>
-		    </para></listitem></varlistentry>
-
-		</variablelist>
-	    </sect2>
-
-	</sect1>
-
-    </chapter>
-
-</book>
-<!-- vim:syntax=sgml:sw=4
--->