Merge tag 'regulator-v6.9' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator

Pull regulator updates from Mark Brown:
 "This has been a very quiet release, mostly cleanups, API updates and
  simple device additions. I messed up slightly and there are a couple
  of duplicated commits resulting from me leaving things in my inbox
  which didn't seem worth removing by the time I noticed them.

   - Conversion of several drivers to GPIO descriptors

   - Build out the features of of the MP8859 driver

   - Support for Qualcomm PM4125 and PM6150"

* tag 'regulator-v6.9' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator: (31 commits)
  regulator: lp8788-buck: fix copy and paste bug in lp8788_dvs_gpio_request()
  regulator: core: make regulator_class constant
  regulator: da9121: Remove unused of_gpio.h
  regulator: userspace-consumer: add module device table
  regulator: dt-bindings: gpio-regulator: Fix "gpios-states" and "states" array bounds
  regulator: mp8859: Implement set_current_limit()
  regulator: mp8859: Report slew rate
  regulator: mp8859: Support status and error readback
  regulator: mp8859: Support active discharge control
  regulator: mp8859: Support mode operations
  regulator: mp8859: Support enable control
  regulator: mp8859: Validate and log device identifier information
  regulator: mp8859: Specify register accessibility and enable caching
  regulator: max8998: Convert to GPIO descriptors
  regulator: max8997: Convert to GPIO descriptors
  regulator: lp8788-buck: Fully convert to GPIO descriptors
  regulator: da9055: Fully convert to GPIO descriptors
  regulator: max8973: Finalize switch to GPIO descriptors
  regulator: dt-bindings: qcom,usb-vbus-regulator: add support for PM4125
  regulator: dt-bindings: qcom,usb-vbus-regulator: add support for PM4125
  ...

26 files changed, 705 insertions, 509 deletions

diff --git a/Documentation/devicetree/bindings/regulator/gpio-regulator.yaml b/Documentation/devicetree/bindings/regulator/gpio-regulator.yaml
index f4c1f36e52e9..a34e85754658 100644
--- a/Documentation/devicetree/bindings/regulator/gpio-regulator.yaml
+++ b/Documentation/devicetree/bindings/regulator/gpio-regulator.yaml
@@ -47,6 +47,7 @@ properties:
         1: HIGH
       Default is LOW if nothing else is specified.
     $ref: /schemas/types.yaml#/definitions/uint32-array
+    minItems: 1
     maxItems: 8
     items:
       enum: [0, 1]
@@ -57,7 +58,8 @@ properties:
       regulator and matching GPIO configurations to achieve them. If there are
       no states in the "states" array, use a fixed regulator instead.
     $ref: /schemas/types.yaml#/definitions/uint32-matrix
-    maxItems: 8
+    minItems: 2
+    maxItems: 256
     items:
       items:
         - description: Voltage in microvolts
diff --git a/Documentation/devicetree/bindings/regulator/mcp16502-regulator.txt b/Documentation/devicetree/bindings/regulator/mcp16502-regulator.txt
deleted file mode 100644
index 451cc4e86b01..000000000000
--- a/Documentation/devicetree/bindings/regulator/mcp16502-regulator.txt
+++ /dev/null
@@ -1,144 +0,0 @@
-MCP16502 PMIC
-
-Required properties:
-- compatible: "microchip,mcp16502"
-- reg: I2C slave address
-- lpm-gpios: GPIO for LPM pin. Note that this GPIO *must* remain high during
-	     suspend-to-ram, keeping the PMIC into HIBERNATE mode; this
-	     property is optional;
-- regulators: A node that houses a sub-node for each regulator within
-              the device. Each sub-node is identified using the node's
-              name. The content of each sub-node is defined by the
-              standard binding for regulators; see regulator.txt.
-
-Regulators of MCP16502 PMIC:
-1) VDD_IO	- Buck (1.2 - 3.7 V)
-2) VDD_DDR	- Buck (0.6 - 1.85 V)
-3) VDD_CORE	- Buck (0.6 - 1.85 V)
-4) VDD_OTHER	- BUCK (0.6 - 1.85 V)
-5) LDO1		- LDO  (1.2 - 3.7 V)
-6) LDO2		- LDO  (1.2 - 3.7 V)
-
-Regulator modes:
-2 - FPWM: higher precision, higher consumption
-4 - AutoPFM: lower precision, lower consumption
-
-Each regulator is defined using the standard binding for regulators.
-
-Example:
-
-mcp16502@5b {
-	compatible = "microchip,mcp16502";
-	reg = <0x5b>;
-	status = "okay";
-	lpm-gpios = <&pioBU 7 GPIO_ACTIVE_HIGH>;
-
-	regulators {
-		VDD_IO {
-			regulator-name = "VDD_IO";
-			regulator-min-microvolt = <1200000>;
-			regulator-max-microvolt = <3700000>;
-			regulator-initial-mode = <2>;
-			regulator-allowed-modes = <2>, <4>;
-			regulator-always-on;
-
-			regulator-state-standby {
-				regulator-on-in-suspend;
-				regulator-mode = <4>;
-			};
-
-			regulator-state-mem {
-				regulator-off-in-suspend;
-				regulator-mode = <4>;
-			};
-		};
-
-		VDD_DDR {
-			regulator-name = "VDD_DDR";
-			regulator-min-microvolt = <600000>;
-			regulator-max-microvolt = <1850000>;
-			regulator-initial-mode = <2>;
-			regulator-allowed-modes = <2>, <4>;
-			regulator-always-on;
-
-			regulator-state-standby {
-				regulator-on-in-suspend;
-				regulator-mode = <4>;
-			};
-
-			regulator-state-mem {
-				regulator-on-in-suspend;
-				regulator-mode = <4>;
-			};
-		};
-
-		VDD_CORE {
-			regulator-name = "VDD_CORE";
-			regulator-min-microvolt = <600000>;
-			regulator-max-microvolt = <1850000>;
-			regulator-initial-mode = <2>;
-			regulator-allowed-modes = <2>, <4>;
-			regulator-always-on;
-
-			regulator-state-standby {
-				regulator-on-in-suspend;
-				regulator-mode = <4>;
-			};
-
-			regulator-state-mem {
-				regulator-off-in-suspend;
-				regulator-mode = <4>;
-			};
-		};
-
-		VDD_OTHER {
-			regulator-name = "VDD_OTHER";
-			regulator-min-microvolt = <600000>;
-			regulator-max-microvolt = <1850000>;
-			regulator-initial-mode = <2>;
-			regulator-allowed-modes = <2>, <4>;
-			regulator-always-on;
-
-			regulator-state-standby {
-				regulator-on-in-suspend;
-				regulator-mode = <4>;
-			};
-
-			regulator-state-mem {
-				regulator-off-in-suspend;
-				regulator-mode = <4>;
-			};
-		};
-
-		LDO1 {
-			regulator-name = "LDO1";
-			regulator-min-microvolt = <1200000>;
-			regulator-max-microvolt = <3700000>;
-			regulator-always-on;
-
-			regulator-state-standby {
-				regulator-on-in-suspend;
-			};
-
-			regulator-state-mem {
-				regulator-off-in-suspend;
-			};
-		};
-
-		LDO2 {
-			regulator-name = "LDO2";
-			regulator-min-microvolt = <1200000>;
-			regulator-max-microvolt = <3700000>;
-			regulator-always-on;
-
-			regulator-state-standby {
-				regulator-on-in-suspend;
-			};
-
-			regulator-state-mem {
-				regulator-off-in-suspend;
-			};
-		};
-
-	};
-};
diff --git a/Documentation/devicetree/bindings/regulator/microchip,mcp16502.yaml b/Documentation/devicetree/bindings/regulator/microchip,mcp16502.yaml
new file mode 100644
index 000000000000..1aca3646789e
--- /dev/null
+++ b/Documentation/devicetree/bindings/regulator/microchip,mcp16502.yaml
@@ -0,0 +1,180 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/regulator/microchip,mcp16502.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: MCP16502 - High-Performance PMIC
+
+maintainers:
+  - Andrei Simion <andrei.simion@microchip.com>
+
+description:
+  The MCP16502 is an optimally integrated PMIC compatible
+  with Microchip's eMPUs(Embedded Microprocessor Units),
+  requiring Dynamic Voltage Scaling (DVS) with the use
+  of High-Performance mode (HPM).
+
+properties:
+  compatible:
+    const: microchip,mcp16502
+
+  lpm-gpios:
+    maxItems: 1
+    description: GPIO for LPM pin.
+      Note that this GPIO must remain high during
+      suspend-to-ram, keeping the PMIC into HIBERNATE mode.
+
+  reg:
+    maxItems: 1
+
+  regulators:
+    type: object
+    additionalProperties: false
+    description: List of regulators and its properties.
+
+    patternProperties:
+      "^(VDD_(IO|CORE|DDR|OTHER)|LDO[1-2])$":
+        type: object
+        $ref: regulator.yaml#
+        unevaluatedProperties: false
+
+        properties:
+          regulator-initial-mode:
+            enum: [2, 4]
+            default: 2
+            description: Initial operating mode
+
+          regulator-allowed-modes:
+            items:
+              enum: [2, 4]
+            description: Supported modes
+              2 - FPWM higher precision, higher consumption
+              4 - AutoPFM lower precision, lower consumption
+
+required:
+  - compatible
+  - reg
+  - regulators
+
+additionalProperties: false
+
+examples:
+  - |
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        pmic@5b {
+            compatible = "microchip,mcp16502";
+            reg = <0x5b>;
+
+            regulators {
+                VDD_IO {
+                    regulator-name = "VDD_IO";
+                    regulator-min-microvolt = <3300000>;
+                    regulator-max-microvolt = <3300000>;
+                    regulator-initial-mode = <2>;
+                    regulator-allowed-modes = <2>, <4>;
+                    regulator-always-on;
+
+                    regulator-state-standby {
+                        regulator-on-in-suspend;
+                        regulator-mode = <4>;
+                    };
+
+                    regulator-state-mem {
+                        regulator-off-in-suspend;
+                        regulator-mode = <4>;
+                    };
+                };
+
+                VDD_DDR {
+                    regulator-name = "VDD_DDR";
+                    regulator-min-microvolt = <1350000>;
+                    regulator-max-microvolt = <1350000>;
+                    regulator-initial-mode = <2>;
+                    regulator-allowed-modes = <2>, <4>;
+                    regulator-always-on;
+
+                    regulator-state-standby {
+                        regulator-on-in-suspend;
+                        regulator-mode = <4>;
+                    };
+
+                    regulator-state-mem {
+                        regulator-on-in-suspend;
+                        regulator-mode = <4>;
+                    };
+                };
+
+                VDD_CORE {
+                    regulator-name = "VDD_CORE";
+                    regulator-min-microvolt = <1150000>;
+                    regulator-max-microvolt = <1150000>;
+                    regulator-initial-mode = <2>;
+                    regulator-allowed-modes = <2>, <4>;
+                    regulator-always-on;
+
+                    regulator-state-standby {
+                        regulator-on-in-suspend;
+                        regulator-mode = <4>;
+                    };
+
+                    regulator-state-mem {
+                        regulator-off-in-suspend;
+                        regulator-mode = <4>;
+                    };
+                };
+
+                VDD_OTHER {
+                    regulator-name = "VDD_OTHER";
+                    regulator-min-microvolt = <1050000>;
+                    regulator-max-microvolt = <1250000>;
+                    regulator-initial-mode = <2>;
+                    regulator-allowed-modes = <2>, <4>;
+                    regulator-always-on;
+
+                    regulator-state-standby {
+                        regulator-on-in-suspend;
+                        regulator-mode = <4>;
+                    };
+
+                    regulator-state-mem {
+                        regulator-off-in-suspend;
+                        regulator-mode = <4>;
+                    };
+                };
+
+                LDO1 {
+                    regulator-name = "LDO1";
+                    regulator-min-microvolt = <1800000>;
+                    regulator-max-microvolt = <1800000>;
+                    regulator-always-on;
+
+                    regulator-state-standby {
+                        regulator-on-in-suspend;
+                    };
+
+                    regulator-state-mem {
+                        regulator-off-in-suspend;
+                    };
+                };
+
+                LDO2 {
+                    regulator-name = "LDO2";
+                    regulator-min-microvolt = <1200000>;
+                    regulator-max-microvolt = <3700000>;
+                    regulator-always-on;
+
+                    regulator-state-standby {
+                        regulator-on-in-suspend;
+                    };
+
+                    regulator-state-mem {
+                        regulator-off-in-suspend;
+                    };
+                };
+            };
+        };
+    };
diff --git a/Documentation/devicetree/bindings/regulator/qcom,usb-vbus-regulator.yaml b/Documentation/devicetree/bindings/regulator/qcom,usb-vbus-regulator.yaml
index 534f87e98716..8afb40c67af3 100644
--- a/Documentation/devicetree/bindings/regulator/qcom,usb-vbus-regulator.yaml
+++ b/Documentation/devicetree/bindings/regulator/qcom,usb-vbus-regulator.yaml
@@ -19,8 +19,14 @@ allOf:
 
 properties:
   compatible:
-    enum:
-      - qcom,pm8150b-vbus-reg
+    oneOf:
+      - enum:
+          - qcom,pm8150b-vbus-reg
+      - items:
+          - enum:
+              - qcom,pm4125-vbus-reg
+              - qcom,pm6150-vbus-reg
+          - const: qcom,pm8150b-vbus-reg
 
   reg:
     maxItems: 1
diff --git a/Documentation/devicetree/bindings/regulator/ti,tps65132.yaml b/Documentation/devicetree/bindings/regulator/ti,tps65132.yaml
new file mode 100644
index 000000000000..6a6d1a3d6fa7
--- /dev/null
+++ b/Documentation/devicetree/bindings/regulator/ti,tps65132.yaml
@@ -0,0 +1,84 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/regulator/ti,tps65132.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: TI TPS65132 Dual Output Power Regulators
+
+maintainers:
+  - devicetree@vger.kernel.org
+
+description: |
+  The TPS65132 is designed to supply positive/negative driven applications.
+
+  Datasheet is available at:
+  https://www.ti.com/lit/gpn/tps65132
+
+properties:
+  compatible:
+    enum:
+      - ti,tps65132
+
+  reg:
+    maxItems: 1
+
+patternProperties:
+  "^out[pn]$":
+    type: object
+    $ref: regulator.yaml#
+    unevaluatedProperties: false
+    description:
+      Properties for single regulator.
+
+    properties:
+      enable-gpios:
+        maxItems: 1
+        description:
+          GPIO specifier to enable the GPIO control (on/off) for regulator.
+
+      active-discharge-gpios:
+        maxItems: 1
+        description:
+          GPIO specifier to actively discharge the delay mechanism.
+
+      ti,active-discharge-time-us:
+        description: Regulator active discharge time in microseconds.
+
+    dependencies:
+      active-discharge-gpios: [ 'ti,active-discharge-time-us' ]
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        regulator@3e {
+            compatible = "ti,tps65132";
+            reg = <0x3e>;
+
+            outp {
+                regulator-name = "outp";
+                regulator-boot-on;
+                regulator-always-on;
+                enable-gpios = <&gpio 23 GPIO_ACTIVE_HIGH>;
+            };
+
+            outn {
+                regulator-name = "outn";
+                regulator-boot-on;
+                regulator-always-on;
+                regulator-active-discharge = <0>;
+                enable-gpios = <&gpio 40 GPIO_ACTIVE_HIGH>;
+            };
+        };
+    };
diff --git a/Documentation/devicetree/bindings/regulator/tps65132-regulator.txt b/Documentation/devicetree/bindings/regulator/tps65132-regulator.txt
deleted file mode 100644
index 3a3505520c69..000000000000
--- a/Documentation/devicetree/bindings/regulator/tps65132-regulator.txt
+++ /dev/null
@@ -1,46 +0,0 @@
-TPS65132 regulators
-
-Required properties:
-- compatible: "ti,tps65132"
-- reg: I2C slave address
-
-Optional Subnode:
-Device supports two regulators OUTP and OUTN. A sub node within the
-   device node describe the properties of these regulators. The sub-node
-   names must be as follows:
-	-For regulator outp, the sub node name should be "outp".
-	-For regulator outn, the sub node name should be "outn".
-
--enable-gpios:(active high, output) Regulators are controlled by the input pins.
-   If it is connected to GPIO through host system then provide the
-   gpio number as per gpio.txt.
--active-discharge-gpios: (active high, output) Some configurations use delay mechanisms
-  on the enable pin, to keep the regulator enabled for some time after
-  the enable signal goes low. This GPIO is used to actively discharge
-  the delay mechanism. Requires specification of ti,active-discharge-time-us
--ti,active-discharge-time-us: how long the active discharge gpio should be
-  asserted for during active discharge, in microseconds.
-
-Each regulator is defined using the standard binding for regulators.
-
-Example:
-
-	tps65132@3e {
-		compatible = "ti,tps65132";
-		reg = <0x3e>;
-
-		outp {
-			regulator-name = "outp";
-			regulator-boot-on;
-			regulator-always-on;
-			enable-gpios = <&gpio 23 0>;
-		};
-
-		outn {
-			regulator-name = "outn";
-			regulator-boot-on;
-			regulator-always-on;
-			regulator-active-discharge = <0>;
-			enable-gpios = <&gpio 40 0>;
-		};
-	};
diff --git a/drivers/regulator/core.c b/drivers/regulator/core.c
index a968dabb48f5..d019ca6dee9b 100644
--- a/drivers/regulator/core.c
+++ b/drivers/regulator/core.c
@@ -3932,7 +3932,6 @@ static int regulator_get_optimal_voltage(struct regulator_dev *rdev,
 		if (ret < 0)
 			return ret;
 
-		possible_uV = desired_min_uV;
 		done = true;
 
 		goto finish;
@@ -5891,7 +5890,7 @@ static const struct dev_pm_ops __maybe_unused regulator_pm_ops = {
 };
 #endif
 
-struct class regulator_class = {
+const struct class regulator_class = {
 	.name = "regulator",
 	.dev_release = regulator_dev_release,
 	.dev_groups = regulator_dev_groups,
diff --git a/drivers/regulator/da9055-regulator.c b/drivers/regulator/da9055-regulator.c
index 8fd9ac787588..352547c375bd 100644
--- a/drivers/regulator/da9055-regulator.c
+++ b/drivers/regulator/da9055-regulator.c
@@ -9,7 +9,6 @@
 #include <linux/module.h>
 #include <linux/init.h>
 #include <linux/err.h>
-#include <linux/gpio.h>
 #include <linux/gpio/consumer.h>
 #include <linux/platform_device.h>
 #include <linux/regulator/driver.h>
@@ -413,31 +412,35 @@ static struct da9055_regulator_info da9055_regulator_info[] = {
  * GPIO can control regulator state and/or select the regulator register
  * set A/B for voltage ramping.
  */
-static int da9055_gpio_init(struct da9055_regulator *regulator,
+static int da9055_gpio_init(struct device *dev,
+			    struct da9055_regulator *regulator,
 			    struct regulator_config *config,
 			    struct da9055_pdata *pdata, int id)
 {
 	struct da9055_regulator_info *info = regulator->info;
+	struct gpio_desc *ren;
+	struct gpio_desc *ena;
+	struct gpio_desc *rsel;
 	int ret = 0;
 
-	if (!pdata)
-		return 0;
+	/* Look for "regulator-enable-gpios" GPIOs in the regulator node */
+	ren = devm_gpiod_get_optional(dev, "regulator-enable", GPIOD_IN);
+	if (IS_ERR(ren))
+		return PTR_ERR(ren);
 
-	if (pdata->gpio_ren && pdata->gpio_ren[id]) {
-		char name[18];
-		int gpio_mux = pdata->gpio_ren[id];
+	if (ren) {
+		/* This GPIO is not optional at this point */
+		ena = devm_gpiod_get(dev, "enable", GPIOD_OUT_HIGH);
+		if (IS_ERR(ena))
+			return PTR_ERR(ena);
 
-		config->ena_gpiod = pdata->ena_gpiods[id];
+		config->ena_gpiod = ena;
 
 		/*
 		 * GPI pin is muxed with regulator to control the
 		 * regulator state.
 		 */
-		sprintf(name, "DA9055 GPI %d", gpio_mux);
-		ret = devm_gpio_request_one(config->dev, gpio_mux, GPIOF_DIR_IN,
-					    name);
-		if (ret < 0)
-			goto err;
+		gpiod_set_consumer_name(ren, "DA9055 ren GPI");
 
 		/*
 		 * Let the regulator know that its state is controlled
@@ -448,24 +451,22 @@ static int da9055_gpio_init(struct da9055_regulator *regulator,
 					pdata->reg_ren[id]
 					<< DA9055_E_GPI_SHIFT);
 		if (ret < 0)
-			goto err;
+			return ret;
 	}
 
-	if (pdata->gpio_rsel && pdata->gpio_rsel[id]) {
-		char name[18];
-		int gpio_mux = pdata->gpio_rsel[id];
+	/* Look for "regulator-select-gpios" GPIOs in the regulator node */
+	rsel = devm_gpiod_get_optional(dev, "regulator-select", GPIOD_IN);
+	if (IS_ERR(rsel))
+		return PTR_ERR(rsel);
 
+	if (rsel) {
 		regulator->reg_rselect = pdata->reg_rsel[id];
 
 		/*
 		 * GPI pin is muxed with regulator to select the
 		 * regulator register set A/B for voltage ramping.
 		 */
-		sprintf(name, "DA9055 GPI %d", gpio_mux);
-		ret = devm_gpio_request_one(config->dev, gpio_mux, GPIOF_DIR_IN,
-					    name);
-		if (ret < 0)
-			goto err;
+		gpiod_set_consumer_name(rsel, "DA9055 rsel GPI");
 
 		/*
 		 * Let the regulator know that its register set A/B
@@ -477,7 +478,6 @@ static int da9055_gpio_init(struct da9055_regulator *regulator,
 					<< DA9055_V_GPI_SHIFT);
 	}
 
-err:
 	return ret;
 }
 
@@ -532,7 +532,7 @@ static int da9055_regulator_probe(struct platform_device *pdev)
 	if (pdata)
 		config.init_data = pdata->regulators[pdev->id];
 
-	ret = da9055_gpio_init(regulator, &config, pdata, pdev->id);
+	ret = da9055_gpio_init(&pdev->dev, regulator, &config, pdata, pdev->id);
 	if (ret < 0)
 		return ret;
 
diff --git a/drivers/regulator/da9121-regulator.c b/drivers/regulator/da9121-regulator.c
index b551a400bdd1..5ee76b533576 100644
--- a/drivers/regulator/da9121-regulator.c
+++ b/drivers/regulator/da9121-regulator.c
@@ -14,7 +14,6 @@
 // Copyright (C) 2020 Dialog Semiconductor
 
 #include <linux/of.h>
-#include <linux/of_gpio.h>
 #include <linux/gpio/consumer.h>
 #include <linux/regulator/of_regulator.h>
 #include <linux/regulator/machine.h>
diff --git a/drivers/regulator/fixed-helper.c b/drivers/regulator/fixed-helper.c
index 0eb2442456f0..2d5a42b2b3d8 100644
--- a/drivers/regulator/fixed-helper.c
+++ b/drivers/regulator/fixed-helper.c
@@ -15,7 +15,7 @@ static void regulator_fixed_release(struct device *dev)
 {
 	struct fixed_regulator_data *data = container_of(dev,
 			struct fixed_regulator_data, pdev.dev);
-	kfree(data->cfg.supply_name);
+	kfree_const(data->cfg.supply_name);
 	kfree(data);
 }
 
@@ -36,7 +36,7 @@ struct platform_device *regulator_register_always_on(int id, const char *name,
 	if (!data)
 		return NULL;
 
-	data->cfg.supply_name = kstrdup(name, GFP_KERNEL);
+	data->cfg.supply_name = kstrdup_const(name, GFP_KERNEL);
 	if (!data->cfg.supply_name) {
 		kfree(data);
 		return NULL;
diff --git a/drivers/regulator/internal.h b/drivers/regulator/internal.h
index fb4433068d29..77a502141089 100644
--- a/drivers/regulator/internal.h
+++ b/drivers/regulator/internal.h
@@ -58,7 +58,7 @@ struct regulator {
 	struct dentry *debugfs;
 };
 
-extern struct class regulator_class;
+extern const struct class regulator_class;
 
 static inline struct regulator_dev *dev_to_rdev(struct device *dev)
 {
diff --git a/drivers/regulator/lp873x-regulator.c b/drivers/regulator/lp873x-regulator.c
index 8dfdd1db2070..84a134cfcd9c 100644
--- a/drivers/regulator/lp873x-regulator.c
+++ b/drivers/regulator/lp873x-regulator.c
@@ -5,6 +5,7 @@
  * Copyright (C) 2016 Texas Instruments Incorporated - https://www.ti.com/
  */
 
+#include <linux/bitfield.h>
 #include <linux/module.h>
 #include <linux/platform_device.h>
 #include <linux/regmap.h>
@@ -93,7 +94,7 @@ static int lp873x_buck_set_ramp_delay(struct regulator_dev *rdev,
 
 	ret = regmap_update_bits(lp873->regmap, regulators[id].ctrl2_reg,
 				 LP873X_BUCK0_CTRL_2_BUCK0_SLEW_RATE,
-				 reg << __ffs(LP873X_BUCK0_CTRL_2_BUCK0_SLEW_RATE));
+				 FIELD_PREP(LP873X_BUCK0_CTRL_2_BUCK0_SLEW_RATE, reg));
 	if (ret) {
 		dev_err(lp873->dev, "SLEW RATE write failed: %d\n", ret);
 		return ret;
diff --git a/drivers/regulator/lp87565-regulator.c b/drivers/regulator/lp87565-regulator.c
index 61ee5cf3f241..1259b5d20153 100644
--- a/drivers/regulator/lp87565-regulator.c
+++ b/drivers/regulator/lp87565-regulator.c
@@ -5,6 +5,7 @@
  * Copyright (C) 2017 Texas Instruments Incorporated - https://www.ti.com/
  */
 
+#include <linux/bitfield.h>
 #include <linux/module.h>
 #include <linux/platform_device.h>
 #include <linux/regmap.h>
@@ -99,7 +100,7 @@ static int lp87565_buck_set_ramp_delay(struct regulator_dev *rdev,
 
 	ret = regmap_update_bits(rdev->regmap, regulators[id].ctrl2_reg,
 				 LP87565_BUCK_CTRL_2_SLEW_RATE,
-				 reg << __ffs(LP87565_BUCK_CTRL_2_SLEW_RATE));
+				 FIELD_PREP(LP87565_BUCK_CTRL_2_SLEW_RATE, reg));
 	if (ret) {
 		dev_err(&rdev->dev, "SLEW RATE write failed: %d\n", ret);
 		return ret;
diff --git a/drivers/regulator/lp8788-buck.c b/drivers/regulator/lp8788-buck.c
index e97ade09dede..2ade249ab6df 100644
--- a/drivers/regulator/lp8788-buck.c
+++ b/drivers/regulator/lp8788-buck.c
@@ -13,7 +13,7 @@
 #include <linux/platform_device.h>
 #include <linux/regulator/driver.h>
 #include <linux/mfd/lp8788.h>
-#include <linux/gpio.h>
+#include <linux/gpio/consumer.h>
 
 /* register address */
 #define LP8788_EN_BUCK			0x0C
@@ -69,8 +69,8 @@
 #define BUCK_FPWM_SHIFT(x)		(x)
 
 enum lp8788_dvs_state {
-	DVS_LOW  = GPIOF_OUT_INIT_LOW,
-	DVS_HIGH = GPIOF_OUT_INIT_HIGH,
+	DVS_LOW  = 0,
+	DVS_HIGH = 1,
 };
 
 enum lp8788_dvs_mode {
@@ -89,6 +89,8 @@ struct lp8788_buck {
 	struct lp8788 *lp;
 	struct regulator_dev *regulator;
 	void *dvs;
+	struct gpio_desc *gpio1;
+	struct gpio_desc *gpio2; /* Only used on BUCK2 */
 };
 
 /* BUCK 1 ~ 4 voltage ranges */
@@ -106,8 +108,7 @@ static void lp8788_buck1_set_dvs(struct lp8788_buck *buck)
 		return;
 
 	pinstate = dvs->vsel == DVS_SEL_V0 ? DVS_LOW : DVS_HIGH;
-	if (gpio_is_valid(dvs->gpio))
-		gpio_set_value(dvs->gpio, pinstate);
+	gpiod_set_value(buck->gpio1, pinstate);
 }
 
 static void lp8788_buck2_set_dvs(struct lp8788_buck *buck)
@@ -139,11 +140,8 @@ static void lp8788_buck2_set_dvs(struct lp8788_buck *buck)
 		return;
 	}
 
-	if (gpio_is_valid(dvs->gpio[0]))
-		gpio_set_value(dvs->gpio[0], pin1);
-
-	if (gpio_is_valid(dvs->gpio[1]))
-		gpio_set_value(dvs->gpio[1], pin2);
+	gpiod_set_value(buck->gpio1, pin1);
+	gpiod_set_value(buck->gpio2, pin2);
 }
 
 static void lp8788_set_dvs(struct lp8788_buck *buck, enum lp8788_buck_id id)
@@ -202,19 +200,13 @@ static u8 lp8788_select_buck_vout_addr(struct lp8788_buck *buck,
 					enum lp8788_buck_id id)
 {
 	enum lp8788_dvs_mode mode = lp8788_get_buck_dvs_ctrl_mode(buck, id);
-	struct lp8788_buck1_dvs *b1_dvs;
-	struct lp8788_buck2_dvs *b2_dvs;
 	u8 val, idx, addr;
 	int pin1, pin2;
 
 	switch (id) {
 	case BUCK1:
 		if (mode == EXTPIN) {
-			b1_dvs = (struct lp8788_buck1_dvs *)buck->dvs;
-			if (!b1_dvs)
-				goto err;
-
-			idx = gpio_get_value(b1_dvs->gpio) ? 1 : 0;
+			idx = gpiod_get_value(buck->gpio1);
 		} else {
 			lp8788_read_byte(buck->lp, LP8788_BUCK_DVS_SEL, &val);
 			idx = (val & LP8788_BUCK1_DVS_M) >> LP8788_BUCK1_DVS_S;
@@ -223,12 +215,8 @@ static u8 lp8788_select_buck_vout_addr(struct lp8788_buck *buck,
 		break;
 	case BUCK2:
 		if (mode == EXTPIN) {
-			b2_dvs = (struct lp8788_buck2_dvs *)buck->dvs;
-			if (!b2_dvs)
-				goto err;
-
-			pin1 = gpio_get_value(b2_dvs->gpio[0]);
-			pin2 = gpio_get_value(b2_dvs->gpio[1]);
+			pin1 = gpiod_get_value(buck->gpio1);
+			pin2 = gpiod_get_value(buck->gpio2);
 
 			if (pin1 == PIN_LOW && pin2 == PIN_LOW)
 				idx = 0;
@@ -424,28 +412,28 @@ static int lp8788_dvs_gpio_request(struct platform_device *pdev,
 				enum lp8788_buck_id id)
 {
 	struct lp8788_platform_data *pdata = buck->lp->pdata;
-	char *b1_name = "LP8788_B1_DVS";
-	char *b2_name[] = { "LP8788_B2_DVS1", "LP8788_B2_DVS2" };
-	int i, gpio, ret;
+	struct device *dev = &pdev->dev;
 
 	switch (id) {
 	case BUCK1:
-		gpio = pdata->buck1_dvs->gpio;
-		ret = devm_gpio_request_one(&pdev->dev, gpio, DVS_LOW,
-					    b1_name);
-		if (ret)
-			return ret;
+		buck->gpio1 = devm_gpiod_get(dev, "dvs", GPIOD_OUT_LOW);
+		if (IS_ERR(buck->gpio1))
+			return PTR_ERR(buck->gpio1);
+		gpiod_set_consumer_name(buck->gpio1, "LP8788_B1_DVS");
 
 		buck->dvs = pdata->buck1_dvs;
 		break;
 	case BUCK2:
-		for (i = 0; i < LP8788_NUM_BUCK2_DVS; i++) {
-			gpio = pdata->buck2_dvs->gpio[i];
-			ret = devm_gpio_request_one(&pdev->dev, gpio,
-						    DVS_LOW, b2_name[i]);
-			if (ret)
-				return ret;
-		}
+		buck->gpio1 = devm_gpiod_get_index(dev, "dvs", 0, GPIOD_OUT_LOW);
+		if (IS_ERR(buck->gpio1))
+			return PTR_ERR(buck->gpio1);
+		gpiod_set_consumer_name(buck->gpio1, "LP8788_B2_DVS1");
+
+		buck->gpio2 = devm_gpiod_get_index(dev, "dvs", 1, GPIOD_OUT_LOW);
+		if (IS_ERR(buck->gpio2))
+			return PTR_ERR(buck->gpio2);
+		gpiod_set_consumer_name(buck->gpio2, "LP8788_B2_DVS2");
+
 		buck->dvs = pdata->buck2_dvs;
 		break;
 	default:
diff --git a/drivers/regulator/max8973-regulator.c b/drivers/regulator/max8973-regulator.c
index 8d5193207552..f8bb6828feef 100644
--- a/drivers/regulator/max8973-regulator.c
+++ b/drivers/regulator/max8973-regulator.c
@@ -20,9 +20,7 @@
 #include <linux/regulator/machine.h>
 #include <linux/regulator/max8973-regulator.h>
 #include <linux/regulator/of_regulator.h>
-#include <linux/gpio.h>
 #include <linux/gpio/consumer.h>
-#include <linux/of_gpio.h>
 #include <linux/i2c.h>
 #include <linux/slab.h>
 #include <linux/regmap.h>
@@ -102,7 +100,7 @@ struct max8973_chip {
 	struct regulator_desc desc;
 	struct regmap *regmap;
 	bool enable_external_control;
-	int dvs_gpio;
+	struct gpio_desc *dvs_gpiod;
 	int lru_index[MAX8973_MAX_VOUT_REG];
 	int curr_vout_val[MAX8973_MAX_VOUT_REG];
 	int curr_vout_reg;
@@ -184,7 +182,7 @@ static int max8973_dcdc_set_voltage_sel(struct regulator_dev *rdev,
 	 * If gpios are available to select the VOUT register then least
 	 * recently used register for new configuration.
 	 */
-	if (gpio_is_valid(max->dvs_gpio))
+	if (max->dvs_gpiod)
 		found = find_voltage_set_register(max, vsel,
 					&vout_reg, &gpio_val);
 
@@ -201,8 +199,8 @@ static int max8973_dcdc_set_voltage_sel(struct regulator_dev *rdev,
 	}
 
 	/* Select proper VOUT register vio gpios */
-	if (gpio_is_valid(max->dvs_gpio)) {
-		gpio_set_value_cansleep(max->dvs_gpio, gpio_val & 0x1);
+	if (max->dvs_gpiod) {
+		gpiod_set_value_cansleep(max->dvs_gpiod, gpio_val & 0x1);
 		max->curr_gpio_val = gpio_val;
 	}
 	return 0;
@@ -531,7 +529,6 @@ static struct max8973_regulator_platform_data *max8973_parse_dt(
 
 	pdata->enable_ext_control = of_property_read_bool(np,
 						"maxim,externally-enable");
-	pdata->dvs_gpio = of_get_named_gpio(np, "maxim,dvs-gpio", 0);
 
 	ret = of_property_read_u32(np, "maxim,dvs-default-state", &pval);
 	if (!ret)
@@ -612,13 +609,17 @@ static int max8973_probe(struct i2c_client *client)
 		return -EIO;
 	}
 
-	if (pdata->dvs_gpio == -EPROBE_DEFER)
-		return -EPROBE_DEFER;
-
 	max = devm_kzalloc(&client->dev, sizeof(*max), GFP_KERNEL);
 	if (!max)
 		return -ENOMEM;
 
+	max->dvs_gpiod = devm_gpiod_get_optional(&client->dev, "maxim,dvs",
+			 (pdata->dvs_def_state) ? GPIOD_OUT_HIGH : GPIOD_OUT_LOW);
+	if (IS_ERR(max->dvs_gpiod))
+		return dev_err_probe(&client->dev, PTR_ERR(max->dvs_gpiod),
+				     "failed to obtain dvs gpio\n");
+	gpiod_set_consumer_name(max->dvs_gpiod, "max8973-dvs");
+
 	max->regmap = devm_regmap_init_i2c(client, &max8973_regmap_config);
 	if (IS_ERR(max->regmap)) {
 		ret = PTR_ERR(max->regmap);
@@ -663,7 +664,6 @@ static int max8973_probe(struct i2c_client *client)
 	max->desc.ramp_delay_table = max8973_buck_ramp_table;
 	max->desc.n_ramp_values = ARRAY_SIZE(max8973_buck_ramp_table);
 
-	max->dvs_gpio = (pdata->dvs_gpio) ? pdata->dvs_gpio : -EINVAL;
 	max->enable_external_control = pdata->enable_ext_control;
 	max->curr_gpio_val = pdata->dvs_def_state;
 	max->curr_vout_reg = MAX8973_VOUT + pdata->dvs_def_state;
@@ -671,21 +671,9 @@ static int max8973_probe(struct i2c_client *client)
 
 	max->lru_index[0] = max->curr_vout_reg;
 
-	if (gpio_is_valid(max->dvs_gpio)) {
-		int gpio_flags;
+	if (max->dvs_gpiod) {
 		int i;
 
-		gpio_flags = (pdata->dvs_def_state) ?
-				GPIOF_OUT_INIT_HIGH : GPIOF_OUT_INIT_LOW;
-		ret = devm_gpio_request_one(&client->dev, max->dvs_gpio,
-				gpio_flags, "max8973-dvs");
-		if (ret) {
-			dev_err(&client->dev,
-				"gpio_request for gpio %d failed, err = %d\n",
-				max->dvs_gpio, ret);
-			return ret;
-		}
-
 		/*
 		 * Initialize the lru index with vout_reg id
 		 * The index 0 will be most recently used and
diff --git a/drivers/regulator/max8997-regulator.c b/drivers/regulator/max8997-regulator.c
index 0b38eaa73597..5f201ee9a5b8 100644
--- a/drivers/regulator/max8997-regulator.c
+++ b/drivers/regulator/max8997-regulator.c
@@ -9,8 +9,7 @@
 
 #include <linux/bug.h>
 #include <linux/err.h>
-#include <linux/gpio.h>
-#include <linux/of_gpio.h>
+#include <linux/gpio/consumer.h>
 #include <linux/slab.h>
 #include <linux/module.h>
 #include <linux/platform_device.h>
@@ -32,7 +31,7 @@ struct max8997_data {
 	u8 buck1_vol[8];
 	u8 buck2_vol[8];
 	u8 buck5_vol[8];
-	int buck125_gpios[3];
+	struct gpio_desc *buck125_gpiods[3];
 	int buck125_gpioindex;
 	bool ignore_gpiodvs_side_effect;
 
@@ -52,9 +51,9 @@ static inline void max8997_set_gpio(struct max8997_data *max8997)
 	int set2 = ((max8997->buck125_gpioindex) >> 1) & 0x1;
 	int set1 = ((max8997->buck125_gpioindex) >> 2) & 0x1;
 
-	gpio_set_value(max8997->buck125_gpios[0], set1);
-	gpio_set_value(max8997->buck125_gpios[1], set2);
-	gpio_set_value(max8997->buck125_gpios[2], set3);
+	gpiod_set_value(max8997->buck125_gpiods[0], set1);
+	gpiod_set_value(max8997->buck125_gpiods[1], set2);
+	gpiod_set_value(max8997->buck125_gpiods[2], set3);
 }
 
 struct voltage_map_desc {
@@ -873,31 +872,13 @@ static struct regulator_desc regulators[] = {
 };
 
 #ifdef CONFIG_OF
-static int max8997_pmic_dt_parse_dvs_gpio(struct platform_device *pdev,
-			struct max8997_platform_data *pdata,
-			struct device_node *pmic_np)
-{
-	int i, gpio;
-
-	for (i = 0; i < 3; i++) {
-		gpio = of_get_named_gpio(pmic_np,
-					"max8997,pmic-buck125-dvs-gpios", i);
-		if (!gpio_is_valid(gpio)) {
-			dev_err(&pdev->dev, "invalid gpio[%d]: %d\n", i, gpio);
-			return -EINVAL;
-		}
-		pdata->buck125_gpios[i] = gpio;
-	}
-	return 0;
-}
-
 static int max8997_pmic_dt_parse_pdata(struct platform_device *pdev,
 					struct max8997_platform_data *pdata)
 {
 	struct max8997_dev *iodev = dev_get_drvdata(pdev->dev.parent);
 	struct device_node *pmic_np, *regulators_np, *reg_np;
 	struct max8997_regulator_data *rdata;
-	unsigned int i, dvs_voltage_nr = 1, ret;
+	unsigned int i, dvs_voltage_nr = 1;
 
 	pmic_np = iodev->dev->of_node;
 	if (!pmic_np) {
@@ -949,10 +930,6 @@ static int max8997_pmic_dt_parse_pdata(struct platform_device *pdev,
 
 	if (pdata->buck1_gpiodvs || pdata->buck2_gpiodvs ||
 						pdata->buck5_gpiodvs) {
-		ret = max8997_pmic_dt_parse_dvs_gpio(pdev, pdata, pmic_np);
-		if (ret)
-			return -EINVAL;
-
 		if (of_property_read_u32(pmic_np,
 				"max8997,pmic-buck125-default-dvs-idx",
 				&pdata->buck125_default_idx)) {
@@ -1039,7 +1016,6 @@ static int max8997_pmic_probe(struct platform_device *pdev)
 	max8997->buck1_gpiodvs = pdata->buck1_gpiodvs;
 	max8997->buck2_gpiodvs = pdata->buck2_gpiodvs;
 	max8997->buck5_gpiodvs = pdata->buck5_gpiodvs;
-	memcpy(max8997->buck125_gpios, pdata->buck125_gpios, sizeof(int) * 3);
 	max8997->ignore_gpiodvs_side_effect = pdata->ignore_gpiodvs_side_effect;
 
 	nr_dvs = (pdata->buck1_gpiodvs || pdata->buck2_gpiodvs ||
@@ -1110,38 +1086,27 @@ static int max8997_pmic_probe(struct platform_device *pdev)
 	 */
 	if (pdata->buck1_gpiodvs || pdata->buck2_gpiodvs ||
 			pdata->buck5_gpiodvs) {
+		const char *gpio_names[3] = {"MAX8997 SET1", "MAX8997 SET2", "MAX8997 SET3"};
 
-		if (!gpio_is_valid(pdata->buck125_gpios[0]) ||
-				!gpio_is_valid(pdata->buck125_gpios[1]) ||
-				!gpio_is_valid(pdata->buck125_gpios[2])) {
-			dev_err(&pdev->dev, "GPIO NOT VALID\n");
-			return -EINVAL;
-		}
+		for (i = 0; i < 3; i++) {
+			enum gpiod_flags flags;
 
-		ret = devm_gpio_request(&pdev->dev, pdata->buck125_gpios[0],
-					"MAX8997 SET1");
-		if (ret)
-			return ret;
-
-		ret = devm_gpio_request(&pdev->dev, pdata->buck125_gpios[1],
-					"MAX8997 SET2");
-		if (ret)
-			return ret;
-
-		ret = devm_gpio_request(&pdev->dev, pdata->buck125_gpios[2],
-				"MAX8997 SET3");
-		if (ret)
-			return ret;
-
-		gpio_direction_output(pdata->buck125_gpios[0],
-				(max8997->buck125_gpioindex >> 2)
-				& 0x1); /* SET1 */
-		gpio_direction_output(pdata->buck125_gpios[1],
-				(max8997->buck125_gpioindex >> 1)
-				& 0x1); /* SET2 */
-		gpio_direction_output(pdata->buck125_gpios[2],
-				(max8997->buck125_gpioindex >> 0)
-				& 0x1); /* SET3 */
+			if (max8997->buck125_gpioindex & BIT(2 - i))
+				flags = GPIOD_OUT_HIGH;
+			else
+				flags = GPIOD_OUT_LOW;
+
+			max8997->buck125_gpiods[i] = devm_gpiod_get_index(iodev->dev,
+									  "max8997,pmic-buck125-dvs",
+									  i,
+									  flags);
+			if (IS_ERR(max8997->buck125_gpiods[i])) {
+				ret = PTR_ERR(max8997->buck125_gpiods[i]);
+				return dev_err_probe(iodev->dev, ret, "cant get GPIO %d (%d)\n",
+						     i, ret);
+			}
+			gpiod_set_consumer_name(max8997->buck125_gpiods[i], gpio_names[i]);
+		}
 	}
 
 	/* DVS-GPIO disabled */
diff --git a/drivers/regulator/max8998.c b/drivers/regulator/max8998.c
index fadb4717384a..254a77887f66 100644
--- a/drivers/regulator/max8998.c
+++ b/drivers/regulator/max8998.c
@@ -10,12 +10,12 @@
 #include <linux/init.h>
 #include <linux/i2c.h>
 #include <linux/err.h>
-#include <linux/gpio.h>
+#include <linux/bits.h>
+#include <linux/gpio/consumer.h>
 #include <linux/slab.h>
 #include <linux/interrupt.h>
 #include <linux/mutex.h>
 #include <linux/of.h>
-#include <linux/of_gpio.h>
 #include <linux/platform_device.h>
 #include <linux/regulator/driver.h>
 #include <linux/regulator/of_regulator.h>
@@ -31,6 +31,9 @@ struct max8998_data {
 	unsigned int		buck1_idx; /* index to last changed voltage */
 					   /* value in a set */
 	unsigned int		buck2_idx;
+	struct gpio_desc	*buck1_gpio1;
+	struct gpio_desc	*buck1_gpio2;
+	struct gpio_desc	*buck2_gpio;
 };
 
 static const unsigned int charger_current_table[] = {
@@ -227,15 +230,15 @@ static int max8998_set_voltage_ldo_sel(struct regulator_dev *rdev,
 	return ret;
 }
 
-static inline void buck1_gpio_set(int gpio1, int gpio2, int v)
+static inline void buck1_gpio_set(struct gpio_desc *gpio1, struct gpio_desc *gpio2, int v)
 {
-	gpio_set_value(gpio1, v & 0x1);
-	gpio_set_value(gpio2, (v >> 1) & 0x1);
+	gpiod_set_value(gpio1, v & 0x1);
+	gpiod_set_value(gpio2, (v >> 1) & 0x1);
 }
 
-static inline void buck2_gpio_set(int gpio, int v)
+static inline void buck2_gpio_set(struct gpio_desc *gpio, int v)
 {
-	gpio_set_value(gpio, v & 0x1);
+	gpiod_set_value(gpio, v & 0x1);
 }
 
 static int max8998_set_voltage_buck_sel(struct regulator_dev *rdev,
@@ -260,16 +263,15 @@ static int max8998_set_voltage_buck_sel(struct regulator_dev *rdev,
 			selector, max8998->buck1_vol[0], max8998->buck1_vol[1],
 			max8998->buck1_vol[2], max8998->buck1_vol[3]);
 
-		if (gpio_is_valid(pdata->buck1_set1) &&
-		    gpio_is_valid(pdata->buck1_set2)) {
+		if (max8998->buck1_gpio1 && max8998->buck1_gpio2) {
 
 			/* check if requested voltage */
 			/* value is already defined */
 			for (j = 0; j < ARRAY_SIZE(max8998->buck1_vol); j++) {
 				if (max8998->buck1_vol[j] == selector) {
 					max8998->buck1_idx = j;
-					buck1_gpio_set(pdata->buck1_set1,
-						       pdata->buck1_set2, j);
+					buck1_gpio_set(max8998->buck1_gpio1,
+						       max8998->buck1_gpio2, j);
 					goto buck1_exit;
 				}
 			}
@@ -286,13 +288,13 @@ static int max8998_set_voltage_buck_sel(struct regulator_dev *rdev,
 							   &shift,
 							   &mask);
 			ret = max8998_write_reg(i2c, reg, selector);
-			buck1_gpio_set(pdata->buck1_set1,
-				       pdata->buck1_set2, max8998->buck1_idx);
+			buck1_gpio_set(max8998->buck1_gpio1,
+				       max8998->buck1_gpio2, max8998->buck1_idx);
 			buck1_last_val++;
 buck1_exit:
 			dev_dbg(max8998->dev, "%s: SET1:%d, SET2:%d\n",
-				i2c->name, gpio_get_value(pdata->buck1_set1),
-				gpio_get_value(pdata->buck1_set2));
+				i2c->name, gpiod_get_value(max8998->buck1_gpio1),
+				gpiod_get_value(max8998->buck1_gpio2));
 			break;
 		} else {
 			ret = max8998_write_reg(i2c, reg, selector);
@@ -303,14 +305,13 @@ buck1_exit:
 		dev_dbg(max8998->dev,
 			"BUCK2, selector:%d buck2_vol1:%d, buck2_vol2:%d\n",
 			selector, max8998->buck2_vol[0], max8998->buck2_vol[1]);
-		if (gpio_is_valid(pdata->buck2_set3)) {
-
+		if (max8998->buck2_gpio) {
 			/* check if requested voltage */
 			/* value is already defined */
 			for (j = 0; j < ARRAY_SIZE(max8998->buck2_vol); j++) {
 				if (max8998->buck2_vol[j] == selector) {
 					max8998->buck2_idx = j;
-					buck2_gpio_set(pdata->buck2_set3, j);
+					buck2_gpio_set(max8998->buck2_gpio, j);
 					goto buck2_exit;
 				}
 			}
@@ -322,10 +323,10 @@ buck1_exit:
 					&reg, &shift, &mask);
 			ret = max8998_write_reg(i2c, reg, selector);
 			max8998->buck2_vol[max8998->buck2_idx] = selector;
-			buck2_gpio_set(pdata->buck2_set3, max8998->buck2_idx);
+			buck2_gpio_set(max8998->buck2_gpio, max8998->buck2_idx);
 buck2_exit:
 			dev_dbg(max8998->dev, "%s: SET3:%d\n", i2c->name,
-				gpio_get_value(pdata->buck2_set3));
+				gpiod_get_value(max8998->buck2_gpio));
 		} else {
 			ret = max8998_write_reg(i2c, reg, selector);
 		}
@@ -539,36 +540,6 @@ static const struct regulator_desc regulators[] = {
 			    charger_current_table, MAX8998_REG_CHGR1, 0x7),
 };
 
-static int max8998_pmic_dt_parse_dvs_gpio(struct max8998_dev *iodev,
-			struct max8998_platform_data *pdata,
-			struct device_node *pmic_np)
-{
-	int gpio;
-
-	gpio = of_get_named_gpio(pmic_np, "max8998,pmic-buck1-dvs-gpios", 0);
-	if (!gpio_is_valid(gpio)) {
-		dev_err(iodev->dev, "invalid buck1 gpio[0]: %d\n", gpio);
-		return -EINVAL;
-	}
-	pdata->buck1_set1 = gpio;
-
-	gpio = of_get_named_gpio(pmic_np, "max8998,pmic-buck1-dvs-gpios", 1);
-	if (!gpio_is_valid(gpio)) {
-		dev_err(iodev->dev, "invalid buck1 gpio[1]: %d\n", gpio);
-		return -EINVAL;
-	}
-	pdata->buck1_set2 = gpio;
-
-	gpio = of_get_named_gpio(pmic_np, "max8998,pmic-buck2-dvs-gpio", 0);
-	if (!gpio_is_valid(gpio)) {
-		dev_err(iodev->dev, "invalid buck 2 gpio: %d\n", gpio);
-		return -EINVAL;
-	}
-	pdata->buck2_set3 = gpio;
-
-	return 0;
-}
-
 static int max8998_pmic_dt_parse_pdata(struct max8998_dev *iodev,
 					struct max8998_platform_data *pdata)
 {
@@ -614,10 +585,6 @@ static int max8998_pmic_dt_parse_pdata(struct max8998_dev *iodev,
 	of_node_put(reg_np);
 	of_node_put(regulators_np);
 
-	ret = max8998_pmic_dt_parse_dvs_gpio(iodev, pdata, pmic_np);
-	if (ret)
-		return -EINVAL;
-
 	pdata->buck_voltage_lock = of_property_read_bool(pmic_np, "max8998,pmic-buck-voltage-lock");
 
 	ret = of_property_read_u32(pmic_np,
@@ -665,6 +632,7 @@ static int max8998_pmic_probe(struct platform_device *pdev)
 	struct regulator_dev *rdev;
 	struct max8998_data *max8998;
 	struct i2c_client *i2c;
+	enum gpiod_flags flags;
 	int i, ret;
 	unsigned int v;
 
@@ -693,37 +661,38 @@ static int max8998_pmic_probe(struct platform_device *pdev)
 	max8998->buck1_idx = pdata->buck1_default_idx;
 	max8998->buck2_idx = pdata->buck2_default_idx;
 
-	/* NOTE: */
-	/* For unused GPIO NOT marked as -1 (thereof equal to 0)  WARN_ON */
-	/* will be displayed */
-
 	/* Check if MAX8998 voltage selection GPIOs are defined */
-	if (gpio_is_valid(pdata->buck1_set1) &&
-	    gpio_is_valid(pdata->buck1_set2)) {
-		/* Check if SET1 is not equal to 0 */
-		if (!pdata->buck1_set1) {
-			dev_err(&pdev->dev,
-				"MAX8998 SET1 GPIO defined as 0 !\n");
-			WARN_ON(!pdata->buck1_set1);
-			return -EIO;
-		}
-		/* Check if SET2 is not equal to 0 */
-		if (!pdata->buck1_set2) {
-			dev_err(&pdev->dev,
-				"MAX8998 SET2 GPIO defined as 0 !\n");
-			WARN_ON(!pdata->buck1_set2);
-			return -EIO;
-		}
-
-		gpio_request(pdata->buck1_set1, "MAX8998 BUCK1_SET1");
-		gpio_direction_output(pdata->buck1_set1,
-				      max8998->buck1_idx & 0x1);
-
-
-		gpio_request(pdata->buck1_set2, "MAX8998 BUCK1_SET2");
-		gpio_direction_output(pdata->buck1_set2,
-				      (max8998->buck1_idx >> 1) & 0x1);
-
+	flags = (max8998->buck1_idx & BIT(0)) ? GPIOD_OUT_HIGH : GPIOD_OUT_LOW;
+	max8998->buck1_gpio1 = devm_gpiod_get_index_optional(iodev->dev,
+							     "max8998,pmic-buck1-dvs",
+							     0,
+							     flags);
+	if (IS_ERR(max8998->buck1_gpio1))
+		return dev_err_probe(&pdev->dev, PTR_ERR(max8998->buck1_gpio1),
+				     "could not get BUCK1 GPIO1\n");
+	gpiod_set_consumer_name(max8998->buck1_gpio1, "MAX8998 BUCK1_SET1");
+
+	flags = (max8998->buck1_idx & BIT(1)) ? GPIOD_OUT_HIGH : GPIOD_OUT_LOW;
+	max8998->buck1_gpio2 = devm_gpiod_get_index_optional(iodev->dev,
+							     "max8998,pmic-buck1-dvs",
+							     1,
+							     flags);
+	if (IS_ERR(max8998->buck1_gpio2))
+		return dev_err_probe(&pdev->dev, PTR_ERR(max8998->buck1_gpio2),
+				     "could not get BUCK1 GPIO2\n");
+	gpiod_set_consumer_name(max8998->buck1_gpio1, "MAX8998 BUCK1_SET2");
+
+	flags = (max8998->buck2_idx & BIT(0)) ? GPIOD_OUT_HIGH : GPIOD_OUT_LOW;
+	max8998->buck2_gpio = devm_gpiod_get_index_optional(iodev->dev,
+							     "max8998,pmic-buck2-dvs",
+							     0,
+							     flags);
+	if (IS_ERR(max8998->buck2_gpio))
+		return dev_err_probe(&pdev->dev, PTR_ERR(max8998->buck2_gpio),
+				     "could not get BUCK2 GPIO\n");
+	gpiod_set_consumer_name(max8998->buck1_gpio1, "MAX8998 BUCK2_SET3");
+
+	if (max8998->buck1_gpio1 && max8998->buck1_gpio2) {
 		/* Set predefined values for BUCK1 registers */
 		for (v = 0; v < ARRAY_SIZE(pdata->buck1_voltage); ++v) {
 			int index = MAX8998_BUCK1 - MAX8998_LDO2;
@@ -742,18 +711,7 @@ static int max8998_pmic_probe(struct platform_device *pdev)
 		}
 	}
 
-	if (gpio_is_valid(pdata->buck2_set3)) {
-		/* Check if SET3 is not equal to 0 */
-		if (!pdata->buck2_set3) {
-			dev_err(&pdev->dev,
-				"MAX8998 SET3 GPIO defined as 0 !\n");
-			WARN_ON(!pdata->buck2_set3);
-			return -EIO;
-		}
-		gpio_request(pdata->buck2_set3, "MAX8998 BUCK2_SET3");
-		gpio_direction_output(pdata->buck2_set3,
-				      max8998->buck2_idx & 0x1);
-
+	if (max8998->buck2_gpio) {
 		/* Set predefined values for BUCK2 registers */
 		for (v = 0; v < ARRAY_SIZE(pdata->buck2_voltage); ++v) {
 			int index = MAX8998_BUCK2 - MAX8998_LDO2;
diff --git a/drivers/regulator/mp8859.c b/drivers/regulator/mp8859.c
index b820bd6043e5..ab105ffd6a2e 100644
--- a/drivers/regulator/mp8859.c
+++ b/drivers/regulator/mp8859.c
@@ -35,6 +35,16 @@
 
 #define MP8859_GO_BIT			0x01
 
+#define MP8859_IOUT_LIM_MASK		0x7f
+
+#define MP8859_ENABLE_MASK		0x80
+#define MP8859_DISCHG_EN_MASK		0x10
+#define MP8859_MODE_MASK		0x08
+
+#define MP8859_PG_MASK			0x80
+#define MP8859_OTP_MASK			0x40
+#define MP8859_OTW_MASK			0x20
+#define MP8859_CC_CV_MASK		0x10
 
 static int mp8859_set_voltage_sel(struct regulator_dev *rdev, unsigned int sel)
 {
@@ -73,21 +83,221 @@ static int mp8859_get_voltage_sel(struct regulator_dev *rdev)
 	return val;
 }
 
+static int mp8859_set_voltage_time_sel(struct regulator_dev *rdev,
+				       unsigned int from, unsigned int to)
+{
+	int change;
+
+	/* The voltage ramps at 1mV/uS, selectors are 10mV */
+	if (from > to)
+		change = from - to;
+	else
+		change = to - from;
+
+	return change * 10 * 1000;
+}
+
+static unsigned int mp8859_get_mode(struct regulator_dev *rdev)
+{
+	unsigned int val;
+	int ret;
+
+	ret = regmap_read(rdev->regmap, MP8859_CTL1_REG, &val);
+	if (ret != 0) {
+		dev_err(&rdev->dev, "Failed to read mode: %d\n", ret);
+		return 0;
+	}
+
+	if (val & MP8859_MODE_MASK)
+		return REGULATOR_MODE_FAST;
+	else
+		return REGULATOR_MODE_NORMAL;
+}
+
+static int mp8859_set_mode(struct regulator_dev *rdev, unsigned int mode)
+{
+	unsigned int val;
+
+	switch (mode) {
+	case REGULATOR_MODE_FAST:
+		val = MP8859_MODE_MASK;
+		break;
+	case REGULATOR_MODE_NORMAL:
+		val = 0;
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	return regmap_update_bits(rdev->regmap, MP8859_CTL1_REG,
+				  MP8859_MODE_MASK, val);
+}
+
+static int mp8859_set_current_limit(struct regulator_dev *rdev,
+				    int min_uA, int max_uA)
+{
+	unsigned int cur_val, new_val;
+	int ret, i;
+
+	/* Steps of 50mA */
+	new_val = max_uA / 50000;
+	if (new_val > MP8859_IOUT_LIM_MASK)
+		return -EINVAL;
+	if (new_val == 0)
+		return -EINVAL;
+
+	/*
+	 * If the regulator is limiting then ramp gradually as per
+	 * datasheet, otherwise just set the value directly.
+	 */
+	ret = regmap_read(rdev->regmap, MP8859_STATUS_REG, &cur_val);
+	if (ret != 0)
+		return ret;
+	if (!(cur_val & MP8859_CC_CV_MASK)) {
+		return regmap_update_bits(rdev->regmap, MP8859_IOUT_LIM_REG,
+					  MP8859_IOUT_LIM_MASK, new_val);
+	}
+
+	ret = regmap_read(rdev->regmap, MP8859_IOUT_LIM_REG, &cur_val);
+	if (ret != 0)
+		return ret;
+
+	if (cur_val >= new_val) {
+		for (i = cur_val; i >= new_val; i--) {
+			ret = regmap_update_bits(rdev->regmap,
+						 MP8859_IOUT_LIM_REG,
+						 MP8859_IOUT_LIM_MASK,
+						 cur_val - i);
+			if (ret != 0)
+				return ret;
+		}
+	} else {
+		for (i = cur_val; i <= new_val; i++) {
+			ret = regmap_update_bits(rdev->regmap,
+						 MP8859_IOUT_LIM_REG,
+						 MP8859_IOUT_LIM_MASK,
+						 cur_val + i);
+			if (ret != 0)
+				return ret;
+		}
+	}
+
+	return 0;
+}
+
+static int mp8859_get_status(struct regulator_dev *rdev)
+{
+	unsigned int val;
+	int ret;
+
+	/* Output status is only meaingful when enabled */
+	ret = regmap_read(rdev->regmap, MP8859_CTL1_REG, &val);
+	if (ret != 0)
+		return ret;
+	if (!(val & MP8859_ENABLE_MASK))
+		return REGULATOR_STATUS_UNDEFINED;
+
+	ret = regmap_read(rdev->regmap, MP8859_STATUS_REG, &val);
+	if (ret != 0)
+		return ret;
+
+	if (val & MP8859_PG_MASK)
+		return REGULATOR_STATUS_ON;
+	else
+		return REGULATOR_STATUS_ERROR;
+}
+
+static int mp8859_get_error_flags(struct regulator_dev *rdev,
+				  unsigned int *flags)
+{
+	unsigned int status, enabled;
+	int ret;
+
+	*flags = 0;
+
+	/* Output status is only meaingful when enabled */
+	ret = regmap_read(rdev->regmap, MP8859_CTL1_REG, &enabled);
+	if (ret != 0)
+		return ret;
+	enabled &= MP8859_ENABLE_MASK;
+
+	ret = regmap_read(rdev->regmap, MP8859_STATUS_REG, &status);
+	if (ret != 0)
+		return ret;
+
+	if (enabled && !(status & MP8859_PG_MASK))
+		status |= REGULATOR_ERROR_FAIL;
+	if (status & MP8859_OTP_MASK)
+		status |= REGULATOR_ERROR_OVER_TEMP;
+	if (status & MP8859_OTW_MASK)
+		status |= REGULATOR_ERROR_OVER_TEMP_WARN;
+	if (status & MP8859_CC_CV_MASK)
+		status |= REGULATOR_ERROR_OVER_CURRENT;
+
+	return 0;
+}
+
 static const struct linear_range mp8859_dcdc_ranges[] = {
 	REGULATOR_LINEAR_RANGE(0, VOL_MIN_IDX, VOL_MAX_IDX, 10000),
 };
 
+static bool mp8859_readable(struct device *dev, unsigned int reg)
+{
+	switch (reg) {
+	case MP8859_VOUT_L_REG:
+	case MP8859_VOUT_H_REG:
+	case MP8859_VOUT_GO_REG:
+	case MP8859_IOUT_LIM_REG:
+	case MP8859_CTL1_REG:
+	case MP8859_CTL2_REG:
+	case MP8859_STATUS_REG:
+	case MP8859_INTERRUPT_REG:
+	case MP8859_MASK_REG:
+	case MP8859_ID1_REG:
+	case MP8859_MFR_ID_REG:
+	case MP8859_DEV_ID_REG:
+	case MP8859_IC_REV_REG:
+		return true;
+	default:
+		return false;
+	}
+}
+
+static bool mp8859_volatile(struct device *dev, unsigned int reg)
+{
+	switch (reg) {
+	case MP8859_VOUT_GO_REG:
+	case MP8859_STATUS_REG:
+	case MP8859_INTERRUPT_REG:
+		return true;
+	default:
+		return false;
+	}
+}
+
 static const struct regmap_config mp8859_regmap = {
 	.reg_bits = 8,
 	.val_bits = 8,
 	.max_register = MP8859_MAX_REG,
-	.cache_type = REGCACHE_RBTREE,
+	.cache_type = REGCACHE_MAPLE,
+	.readable_reg = mp8859_readable,
+	.volatile_reg = mp8859_volatile,
 };
 
 static const struct regulator_ops mp8859_ops = {
 	.set_voltage_sel = mp8859_set_voltage_sel,
 	.get_voltage_sel = mp8859_get_voltage_sel,
 	.list_voltage = regulator_list_voltage_linear_range,
+	.set_voltage_time_sel = mp8859_set_voltage_time_sel,
+	.enable = regulator_enable_regmap,
+	.disable = regulator_disable_regmap,
+	.is_enabled = regulator_is_enabled_regmap,
+	.set_mode = mp8859_set_mode,
+	.get_mode = mp8859_get_mode,
+	.set_active_discharge = regulator_set_active_discharge_regmap,
+	.set_current_limit = mp8859_set_current_limit,
+	.get_status = mp8859_get_status,
+	.get_error_flags = mp8859_get_error_flags,
 };
 
 static const struct regulator_desc mp8859_regulators[] = {
@@ -100,6 +310,12 @@ static const struct regulator_desc mp8859_regulators[] = {
 		.n_voltages = VOL_MAX_IDX + 1,
 		.linear_ranges = mp8859_dcdc_ranges,
 		.n_linear_ranges = 1,
+		.enable_reg = MP8859_CTL1_REG,
+		.enable_mask = MP8859_ENABLE_MASK,
+		.enable_val = MP8859_ENABLE_MASK,
+		.active_discharge_reg = MP8859_CTL1_REG,
+		.active_discharge_on = MP8859_DISCHG_EN_MASK,
+		.active_discharge_mask = MP8859_DISCHG_EN_MASK,
 		.ops = &mp8859_ops,
 		.owner = THIS_MODULE,
 	},
@@ -111,12 +327,46 @@ static int mp8859_i2c_probe(struct i2c_client *i2c)
 	struct regulator_config config = {.dev = &i2c->dev};
 	struct regmap *regmap = devm_regmap_init_i2c(i2c, &mp8859_regmap);
 	struct regulator_dev *rdev;
+	unsigned int val, rev;
 
 	if (IS_ERR(regmap)) {
 		ret = PTR_ERR(regmap);
 		dev_err(&i2c->dev, "regmap init failed: %d\n", ret);
 		return ret;
 	}
+
+	ret = regmap_read(regmap, MP8859_MFR_ID_REG, &val);
+	if (ret != 0) {
+		dev_err(&i2c->dev, "Failed to read manufacturer ID: %d\n", ret);
+		return ret;
+	}
+	if (val != 0x9) {
+		dev_err(&i2c->dev, "Manufacturer ID %x != 9\n", val);
+		return -EINVAL;
+	}
+
+	ret = regmap_read(regmap, MP8859_DEV_ID_REG, &val);
+	if (ret != 0) {
+		dev_err(&i2c->dev, "Failed to read device ID: %d\n", ret);
+		return ret;
+	}
+	if (val != 0x58) {
+		dev_err(&i2c->dev, "Manufacturer ID %x != 0x58\n", val);
+		return -EINVAL;
+	}
+
+	ret = regmap_read(regmap, MP8859_IC_REV_REG, &rev);
+	if (ret != 0) {
+		dev_err(&i2c->dev, "Failed to read device revision: %d\n", ret);
+		return ret;
+	}
+	ret = regmap_read(regmap, MP8859_ID1_REG, &val);
+	if (ret != 0) {
+		dev_err(&i2c->dev, "Failed to read device ID1: %d\n", ret);
+		return ret;
+	}
+	dev_info(&i2c->dev, "MP8859-%04d revision %d\n", val, rev);
+
 	rdev = devm_regulator_register(&i2c->dev, &mp8859_regulators[0],
 					&config);
 
diff --git a/drivers/regulator/pwm-regulator.c b/drivers/regulator/pwm-regulator.c
index 60cfcd741c2a..7434b6b22d32 100644
--- a/drivers/regulator/pwm-regulator.c
+++ b/drivers/regulator/pwm-regulator.c
@@ -271,11 +271,10 @@ static int pwm_regulator_init_table(struct platform_device *pdev,
 	of_find_property(np, "voltage-table", &length);
 
 	if ((length < sizeof(*duty_cycle_table)) ||
-	    (length % sizeof(*duty_cycle_table))) {
-		dev_err(&pdev->dev, "voltage-table length(%d) is invalid\n",
-			length);
-		return -EINVAL;
-	}
+	    (length % sizeof(*duty_cycle_table)))
+		return dev_err_probe(&pdev->dev, -EINVAL,
+				     "voltage-table length(%d) is invalid\n",
+				     length);
 
 	duty_cycle_table = devm_kzalloc(&pdev->dev, length, GFP_KERNEL);
 	if (!duty_cycle_table)
@@ -284,10 +283,9 @@ static int pwm_regulator_init_table(struct platform_device *pdev,
 	ret = of_property_read_u32_array(np, "voltage-table",
 					 (u32 *)duty_cycle_table,
 					 length / sizeof(u32));
-	if (ret) {
-		dev_err(&pdev->dev, "Failed to read voltage-table: %d\n", ret);
-		return ret;
-	}
+	if (ret)
+		return dev_err_probe(&pdev->dev, ret,
+				     "Failed to read voltage-table\n");
 
 	drvdata->state			= -ENOTRECOVERABLE;
 	drvdata->duty_cycle_table	= duty_cycle_table;
@@ -359,10 +357,9 @@ static int pwm_regulator_probe(struct platform_device *pdev)
 	enum gpiod_flags gpio_flags;
 	int ret;
 
-	if (!np) {
-		dev_err(&pdev->dev, "Device Tree node missing\n");
-		return -EINVAL;
-	}
+	if (!np)
+		return dev_err_probe(&pdev->dev, -EINVAL,
+				     "Device Tree node missing\n");
 
 	drvdata = devm_kzalloc(&pdev->dev, sizeof(*drvdata), GFP_KERNEL);
 	if (!drvdata)
@@ -400,8 +397,7 @@ static int pwm_regulator_probe(struct platform_device *pdev)
 						    gpio_flags);
 	if (IS_ERR(drvdata->enb_gpio)) {
 		ret = PTR_ERR(drvdata->enb_gpio);
-		dev_err(&pdev->dev, "Failed to get enable GPIO: %d\n", ret);
-		return ret;
+		return dev_err_probe(&pdev->dev, ret, "Failed to get enable GPIO\n");
 	}
 
 	ret = pwm_adjust_config(drvdata->pwm);
@@ -409,19 +405,17 @@ static int pwm_regulator_probe(struct platform_device *pdev)
 		return ret;
 
 	ret = pwm_regulator_init_boot_on(pdev, drvdata, init_data);
-	if (ret) {
-		dev_err(&pdev->dev, "Failed to apply boot_on settings: %d\n",
-			ret);
-		return ret;
-	}
+	if (ret)
+		return dev_err_probe(&pdev->dev, ret,
+				     "Failed to apply boot_on settings\n");
 
 	regulator = devm_regulator_register(&pdev->dev,
 					    &drvdata->desc, &config);
 	if (IS_ERR(regulator)) {
 		ret = PTR_ERR(regulator);
-		dev_err(&pdev->dev, "Failed to register regulator %s: %d\n",
-			drvdata->desc.name, ret);
-		return ret;
+		return dev_err_probe(&pdev->dev, ret,
+				     "Failed to register regulator %s\n",
+				     drvdata->desc.name);
 	}
 
 	return 0;
diff --git a/drivers/regulator/qcom_smd-regulator.c b/drivers/regulator/qcom_smd-regulator.c
index d1be9568025e..3b7e06b9f5ce 100644
--- a/drivers/regulator/qcom_smd-regulator.c
+++ b/drivers/regulator/qcom_smd-regulator.c
@@ -11,11 +11,10 @@
 #include <linux/regulator/of_regulator.h>
 #include <linux/soc/qcom/smd-rpm.h>
 
+struct qcom_smd_rpm *smd_vreg_rpm;
+
 struct qcom_rpm_reg {
 	struct device *dev;
-
-	struct qcom_smd_rpm *rpm;
-
 	u32 type;
 	u32 id;
 
@@ -70,7 +69,7 @@ static int rpm_reg_write_active(struct qcom_rpm_reg *vreg)
 	if (!reqlen)
 		return 0;
 
-	ret = qcom_rpm_smd_write(vreg->rpm, QCOM_SMD_RPM_ACTIVE_STATE,
+	ret = qcom_rpm_smd_write(smd_vreg_rpm, QCOM_SMD_RPM_ACTIVE_STATE,
 				 vreg->type, vreg->id,
 				 req, sizeof(req[0]) * reqlen);
 	if (!ret) {
@@ -1384,14 +1383,13 @@ MODULE_DEVICE_TABLE(of, rpm_of_match);
  * @dev:		Pointer to the top level qcom_smd-regulator PMIC device
  * @node:		Pointer to the individual qcom_smd-regulator resource
  *			device node
- * @rpm:		Pointer to the rpm bus node
  * @pmic_rpm_data:	Pointer to a null-terminated array of qcom_smd-regulator
  *			resources defined for the top level PMIC device
  *
  * Return: 0 on success, errno on failure
  */
 static int rpm_regulator_init_vreg(struct qcom_rpm_reg *vreg, struct device *dev,
-				   struct device_node *node, struct qcom_smd_rpm *rpm,
+				   struct device_node *node,
 				   const struct rpm_regulator_data *pmic_rpm_data)
 {
 	struct regulator_config config = {};
@@ -1409,7 +1407,6 @@ static int rpm_regulator_init_vreg(struct qcom_rpm_reg *vreg, struct device *dev
 	}
 
 	vreg->dev	= dev;
-	vreg->rpm	= rpm;
 	vreg->type	= rpm_data->type;
 	vreg->id	= rpm_data->id;
 
@@ -1449,6 +1446,11 @@ static int rpm_reg_probe(struct platform_device *pdev)
 		return -ENODEV;
 	}
 
+	if (smd_vreg_rpm && rpm != smd_vreg_rpm)
+		return dev_err_probe(dev, -EINVAL, "RPM mismatch\n");
+
+	smd_vreg_rpm = rpm;
+
 	vreg_data = of_device_get_match_data(dev);
 	if (!vreg_data)
 		return -ENODEV;
@@ -1460,8 +1462,7 @@ static int rpm_reg_probe(struct platform_device *pdev)
 			return -ENOMEM;
 		}
 
-		ret = rpm_regulator_init_vreg(vreg, dev, node, rpm, vreg_data);
-
+		ret = rpm_regulator_init_vreg(vreg, dev, node, vreg_data);
 		if (ret < 0) {
 			of_node_put(node);
 			return ret;
diff --git a/drivers/regulator/userspace-consumer.c b/drivers/regulator/userspace-consumer.c
index 53d1b9d6f69c..86a626a4f610 100644
--- a/drivers/regulator/userspace-consumer.c
+++ b/drivers/regulator/userspace-consumer.c
@@ -208,6 +208,7 @@ static const struct of_device_id regulator_userspace_consumer_of_match[] = {
 	{ .compatible = "regulator-output", },
 	{},
 };
+MODULE_DEVICE_TABLE(of, regulator_userspace_consumer_of_match);
 
 static struct platform_driver regulator_userspace_consumer_driver = {
 	.probe		= regulator_userspace_consumer_probe,
diff --git a/include/linux/mfd/da9055/pdata.h b/include/linux/mfd/da9055/pdata.h
index d3f126990ad0..137a2b067512 100644
--- a/include/linux/mfd/da9055/pdata.h
+++ b/include/linux/mfd/da9055/pdata.h
@@ -7,7 +7,6 @@
 #define DA9055_MAX_REGULATORS	8
 
 struct da9055;
-struct gpio_desc;
 
 enum gpio_select {
 	NO_GPIO = 0,
@@ -24,16 +23,6 @@ struct da9055_pdata {
 	/* Enable RTC in RESET Mode */
 	bool reset_enable;
 	/*
-	 * GPI muxed pin to control
-	 * regulator state A/B, 0 if not available.
-	 */
-	int *gpio_ren;
-	/*
-	 * GPI muxed pin to control
-	 * regulator set, 0 if not available.
-	 */
-	int *gpio_rsel;
-	/*
 	 * Regulator mode control bits value (GPI offset) that
 	 * controls the regulator state, 0 if not available.
 	 */
@@ -43,7 +32,5 @@ struct da9055_pdata {
 	 * controls the regulator set A/B, 0 if  not available.
 	 */
 	enum gpio_select *reg_rsel;
-	/* GPIO descriptors to enable regulator, NULL if not available */
-	struct gpio_desc **ena_gpiods;
 };
 #endif /* __DA9055_PDATA_H */
diff --git a/include/linux/mfd/lp8788.h b/include/linux/mfd/lp8788.h
index 3d5c480d58ea..51b47966a04d 100644
--- a/include/linux/mfd/lp8788.h
+++ b/include/linux/mfd/lp8788.h
@@ -10,7 +10,6 @@
 #ifndef __MFD_LP8788_H__
 #define __MFD_LP8788_H__
 
-#include <linux/gpio.h>
 #include <linux/irqdomain.h>
 #include <linux/pwm.h>
 #include <linux/regmap.h>
@@ -159,21 +158,17 @@ struct lp8788;
 
 /*
  * lp8788_buck1_dvs
- * @gpio         : gpio pin number for dvs control
  * @vsel         : dvs selector for buck v1 register
  */
 struct lp8788_buck1_dvs {
-	int gpio;
 	enum lp8788_dvs_sel vsel;
 };
 
 /*
  * lp8788_buck2_dvs
- * @gpio         : two gpio pin numbers are used for dvs
  * @vsel         : dvs selector for buck v2 register
  */
 struct lp8788_buck2_dvs {
-	int gpio[LP8788_NUM_BUCK2_DVS];
 	enum lp8788_dvs_sel vsel;
 };
 
@@ -268,8 +263,8 @@ struct lp8788_vib_platform_data {
  * @buck_data    : regulator initial data for buck
  * @dldo_data    : regulator initial data for digital ldo
  * @aldo_data    : regulator initial data for analog ldo
- * @buck1_dvs    : gpio configurations for buck1 dvs
- * @buck2_dvs    : gpio configurations for buck2 dvs
+ * @buck1_dvs    : configurations for buck1 dvs
+ * @buck2_dvs    : configurations for buck2 dvs
  * @chg_pdata    : platform data for charger driver
  * @alarm_sel    : rtc alarm selection (1 or 2)
  * @bl_pdata     : configurable data for backlight driver
diff --git a/include/linux/mfd/max8997.h b/include/linux/mfd/max8997.h
index 6193905abbb5..5c2cc1103437 100644
--- a/include/linux/mfd/max8997.h
+++ b/include/linux/mfd/max8997.h
@@ -178,7 +178,6 @@ struct max8997_platform_data {
 	 *
 	 */
 	bool ignore_gpiodvs_side_effect;
-	int buck125_gpios[3]; /* GPIO of [0]SET1, [1]SET2, [2]SET3 */
 	int buck125_default_idx; /* Default value of SET1, 2, 3 */
 	unsigned int buck1_voltage[8]; /* buckx_voltage in uV */
 	bool buck1_gpiodvs;
diff --git a/include/linux/mfd/max8998.h b/include/linux/mfd/max8998.h
index 79c020bd0c70..a054e55c8646 100644
--- a/include/linux/mfd/max8998.h
+++ b/include/linux/mfd/max8998.h
@@ -65,10 +65,7 @@ struct max8998_regulator_data {
  *   be other than the preset values.
  * @buck1_voltage: BUCK1 DVS mode 1 voltage registers
  * @buck2_voltage: BUCK2 DVS mode 2 voltage registers
- * @buck1_set1: BUCK1 gpio pin 1 to set output voltage
- * @buck1_set2: BUCK1 gpio pin 2 to set output voltage
  * @buck1_default_idx: Default for BUCK1 gpio pin 1, 2
- * @buck2_set3: BUCK2 gpio pin to set output voltage
  * @buck2_default_idx: Default for BUCK2 gpio pin.
  * @wakeup: Allow to wake up from suspend
  * @rtc_delay: LP3974 RTC chip bug that requires delay after a register
@@ -91,10 +88,7 @@ struct max8998_platform_data {
 	bool				buck_voltage_lock;
 	int				buck1_voltage[4];
 	int				buck2_voltage[2];
-	int				buck1_set1;
-	int				buck1_set2;
 	int				buck1_default_idx;
-	int				buck2_set3;
 	int				buck2_default_idx;
 	bool				wakeup;
 	bool				rtc_delay;
diff --git a/include/linux/regulator/max8973-regulator.h b/include/linux/regulator/max8973-regulator.h
index 8313e7ed6aec..a225e9eeb30d 100644
--- a/include/linux/regulator/max8973-regulator.h
+++ b/include/linux/regulator/max8973-regulator.h
@@ -48,10 +48,6 @@
  *		control signal from EN input pin. If it is false then
  *		voltage output will be enabled/disabled through EN bit of
  *		device register.
- * @enable_gpio: Enable GPIO. If EN pin is controlled through GPIO from host
- *		then GPIO number can be provided. If no GPIO controlled then
- *		it should be -1.
- * @dvs_gpio: GPIO for dvs. It should be -1 if this is tied with fixed logic.
  * @dvs_def_state: Default state of dvs. 1 if it is high else 0.
  */
 struct max8973_regulator_platform_data {
@@ -59,8 +55,6 @@ struct max8973_regulator_platform_data {
 	unsigned long control_flags;
 	unsigned long junction_temp_warning;
 	bool enable_ext_control;
-	int enable_gpio;
-	int dvs_gpio;
 	unsigned dvs_def_state:1;
 };