diff options
| author | Neil Armstrong <neil.armstrong@linaro.org> | 2023-09-11 10:28:47 +0300 |
|---|---|---|
| committer | Bjorn Andersson <andersson@kernel.org> | 2023-09-14 05:48:22 +0300 |
| commit | 1cec289a3ced45b7f4a5e136acd79e401167c1ba (patch) | |
| tree | 51f1a65f1b43e7ae90e6710584783d1281f32497 | |
| parent | 75cac7090298978c12c59dbca377d957f6f8a8bb (diff) | |
| download | linux-1cec289a3ced45b7f4a5e136acd79e401167c1ba.tar.xz | |
arm64: dts: qcom: sm8550-qrd: add bluetooth support
Enable the WCN7850 bluetooth over the UART14 link.
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://lore.kernel.org/r/20230911-topic-sm8550-upstream-bt-v4-2-a5a428c77418@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
| -rw-r--r-- | arch/arm64/boot/dts/qcom/sm8550-qrd.dts | 43 |
1 files changed, 43 insertions, 0 deletions
diff --git a/arch/arm64/boot/dts/qcom/sm8550-qrd.dts b/arch/arm64/boot/dts/qcom/sm8550-qrd.dts index 2c09ce8aeafd..a17c9f4f713f 100644 --- a/arch/arm64/boot/dts/qcom/sm8550-qrd.dts +++ b/arch/arm64/boot/dts/qcom/sm8550-qrd.dts @@ -23,6 +23,7 @@ aliases { serial0 = &uart7; + serial1 = &uart14; }; wcd938x: audio-codec { @@ -765,6 +766,10 @@ status = "okay"; }; +&qupv3_id_1 { + status = "okay"; +}; + &remoteproc_adsp { firmware-name = "qcom/sm8550/adsp.mbn", "qcom/sm8550/adsp_dtb.mbn"; @@ -842,6 +847,21 @@ &tlmm { gpio-reserved-ranges = <32 8>; + bt_default: bt-default-state { + bt-en-pins { + pins = "gpio81"; + function = "gpio"; + drive-strength = <16>; + bias-disable; + }; + + sw-ctrl-pins { + pins = "gpio82"; + function = "gpio"; + bias-pull-down; + }; + }; + sde_dsi_active: sde-dsi-active-state { pins = "gpio133"; function = "gpio"; @@ -883,6 +903,29 @@ status = "okay"; }; +&uart14 { + status = "okay"; + + bluetooth { + compatible = "qcom,wcn7850-bt"; + + vddio-supply = <&vreg_l15b_1p8>; + vddaon-supply = <&vreg_s4e_0p95>; + vdddig-supply = <&vreg_s4e_0p95>; + vddrfa0p8-supply = <&vreg_s4e_0p95>; + vddrfa1p2-supply = <&vreg_s4g_1p25>; + vddrfa1p9-supply = <&vreg_s6g_1p86>; + + max-speed = <3200000>; + + enable-gpios = <&tlmm 81 GPIO_ACTIVE_HIGH>; + swctrl-gpios = <&tlmm 82 GPIO_ACTIVE_HIGH>; + + pinctrl-0 = <&bt_default>; + pinctrl-names = "default"; + }; +}; + &ufs_mem_hc { reset-gpios = <&tlmm 210 GPIO_ACTIVE_LOW>; vcc-supply = <&vreg_l17b_2p5>; |