summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
authorLinus Torvalds <torvalds@linux-foundation.org>2014-12-11 08:17:00 +0300
committerLinus Torvalds <torvalds@linux-foundation.org>2014-12-11 08:17:00 +0300
commit92a578b064d0227a3a7fbbdb9e29dbab7f8d400e (patch)
tree1979a62f38e24997a7312c4ce753860cc95b389b
parentc75059c46293adf1560162c17148ab94624f5ed2 (diff)
parente3d857e1ae787a5e268bc89425aadae09c8e95a4 (diff)
downloadlinux-92a578b064d0227a3a7fbbdb9e29dbab7f8d400e.tar.xz
Merge tag 'pm+acpi-3.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull ACPI and power management updates from Rafael Wysocki: "This time we have some more new material than we used to have during the last couple of development cycles. The most important part of it to me is the introduction of a unified interface for accessing device properties provided by platform firmware. It works with Device Trees and ACPI in a uniform way and drivers using it need not worry about where the properties come from as long as the platform firmware (either DT or ACPI) makes them available. It covers both devices and "bare" device node objects without struct device representation as that turns out to be necessary in some cases. This has been in the works for quite a few months (and development cycles) and has been approved by all of the relevant maintainers. On top of that, some drivers are switched over to the new interface (at25, leds-gpio, gpio_keys_polled) and some additional changes are made to the core GPIO subsystem to allow device drivers to manipulate GPIOs in the "canonical" way on platforms that provide GPIO information in their ACPI tables, but don't assign names to GPIO lines (in which case the driver needs to do that on the basis of what it knows about the device in question). That also has been approved by the GPIO core maintainers and the rfkill driver is now going to use it. Second is support for hardware P-states in the intel_pstate driver. It uses CPUID to detect whether or not the feature is supported by the processor in which case it will be enabled by default. However, it can be disabled entirely from the kernel command line if necessary. Next is support for a platform firmware interface based on ACPI operation regions used by the PMIC (Power Management Integrated Circuit) chips on the Intel Baytrail-T and Baytrail-T-CR platforms. That interface is used for manipulating power resources and for thermal management: sensor temperature reporting, trip point setting and so on. Also the ACPI core is now going to support the _DEP configuration information in a limited way. Basically, _DEP it supposed to reflect off-the-hierarchy dependencies between devices which may be very indirect, like when AML for one device accesses locations in an operation region handled by another device's driver (usually, the device depended on this way is a serial bus or GPIO controller). The support added this time is sufficient to make the ACPI battery driver work on Asus T100A, but it is general enough to be able to cover some other use cases in the future. Finally, we have a new cpufreq driver for the Loongson1B processor. In addition to the above, there are fixes and cleanups all over the place as usual and a traditional ACPICA update to a recent upstream release. As far as the fixes go, the ACPI LPSS (Low-power Subsystem) driver for Intel platforms should be able to handle power management of the DMA engine correctly, the cpufreq-dt driver should interact with the thermal subsystem in a better way and the ACPI backlight driver should handle some more corner cases, among other things. On top of the ACPICA update there are fixes for race conditions in the ACPICA's interrupt handling code which might lead to some random and strange looking failures on some systems. In the cleanups department the most visible part is the series of commits targeted at getting rid of the CONFIG_PM_RUNTIME configuration option. That was triggered by a discussion regarding the generic power domains code during which we realized that trying to support certain combinations of PM config options was painful and not really worth it, because nobody would use them in production anyway. For this reason, we decided to make CONFIG_PM_SLEEP select CONFIG_PM_RUNTIME and that lead to the conclusion that the latter became redundant and CONFIG_PM could be used instead of it. The material here makes that replacement in a major part of the tree, but there will be at least one more batch of that in the second part of the merge window. Specifics: - Support for retrieving device properties information from ACPI _DSD device configuration objects and a unified device properties interface for device drivers (and subsystems) on top of that. As stated above, this works with Device Trees and ACPI and allows device drivers to be written in a platform firmware (DT or ACPI) agnostic way. The at25, leds-gpio and gpio_keys_polled drivers are now going to use this new interface and the GPIO subsystem is additionally modified to allow device drivers to assign names to GPIO resources returned by ACPI _CRS objects (in case _DSD is not present or does not provide the expected data). The changes in this set are mostly from Mika Westerberg, Rafael J Wysocki, Aaron Lu, and Darren Hart with some fixes from others (Fabio Estevam, Geert Uytterhoeven). - Support for Hardware Managed Performance States (HWP) as described in Volume 3, section 14.4, of the Intel SDM in the intel_pstate driver. CPUID is used to detect whether or not the feature is supported by the processor. If supported, it will be enabled automatically unless the intel_pstate=no_hwp switch is present in the kernel command line. From Dirk Brandewie. - New Intel Broadwell-H ID for intel_pstate (Dirk Brandewie). - Support for firmware interface based on ACPI operation regions used by the PMIC chips on the Intel Baytrail-T and Baytrail-T-CR platforms for power resource control and thermal management (Aaron Lu). - Limited support for retrieving off-the-hierarchy dependencies between devices from ACPI _DEP device configuration objects and deferred probing support for the ACPI battery driver based on the _DEP information to make that driver work on Asus T100A (Lan Tianyu). - New cpufreq driver for the Loongson1B processor (Kelvin Cheung). - ACPICA update to upstream revision 20141107 which only affects tools (Bob Moore). - Fixes for race conditions in the ACPICA's interrupt handling code and in the ACPI code related to system suspend and resume (Lv Zheng and Rafael J Wysocki). - ACPI core fix for an RCU-related issue in the ioremap() regions management code that slowed down significantly after CPUs had been allowed to enter idle states even if they'd had RCU callbakcs queued and triggered some problems in certain proprietary graphics driver (and elsewhere). The fix replaces synchronize_rcu() in that code with synchronize_rcu_expedited() which makes the issue go away. From Konstantin Khlebnikov. - ACPI LPSS (Low-Power Subsystem) driver fix to handle power management of the DMA engine included into the LPSS correctly. The problem is that the DMA engine doesn't have ACPI PM support of its own and it simply is turned off when the last LPSS device having ACPI PM support goes into D3cold. To work around that, the PM domain used by the ACPI LPSS driver is redesigned so at least one device with ACPI PM support will be on as long as the DMA engine is in use. From Andy Shevchenko. - ACPI backlight driver fix to avoid using it on "Win8-compatible" systems where it doesn't work and where it was used by default by mistake (Aaron Lu). - Assorted minor ACPI core fixes and cleanups from Tomasz Nowicki, Sudeep Holla, Huang Rui, Hanjun Guo, Fabian Frederick, and Ashwin Chaugule (mostly related to the upcoming ARM64 support). - Intel RAPL (Running Average Power Limit) power capping driver fixes and improvements including new processor IDs (Jacob Pan). - Generic power domains modification to power up domains after attaching devices to them to meet the expectations of device drivers and bus types assuming devices to be accessible at probe time (Ulf Hansson). - Preliminary support for controlling device clocks from the generic power domains core code and modifications of the ARM/shmobile platform to use that feature (Ulf Hansson). - Assorted minor fixes and cleanups of the generic power domains core code (Ulf Hansson, Geert Uytterhoeven). - Assorted minor fixes and cleanups of the device clocks control code in the PM core (Geert Uytterhoeven, Grygorii Strashko). - Consolidation of device power management Kconfig options by making CONFIG_PM_SLEEP select CONFIG_PM_RUNTIME and removing the latter which is now redundant (Rafael J Wysocki and Kevin Hilman). That is the first batch of the changes needed for this purpose. - Core device runtime power management support code cleanup related to the execution of callbacks (Andrzej Hajda). - cpuidle ARM support improvements (Lorenzo Pieralisi). - cpuidle cleanup related to the CPUIDLE_FLAG_TIME_VALID flag and a new MAINTAINERS entry for ARM Exynos cpuidle (Daniel Lezcano and Bartlomiej Zolnierkiewicz). - New cpufreq driver callback (->ready) to be executed when the cpufreq core is ready to use a given policy object and cpufreq-dt driver modification to use that callback for cooling device registration (Viresh Kumar). - cpufreq core fixes and cleanups (Viresh Kumar, Vince Hsu, James Geboski, Tomeu Vizoso). - Assorted fixes and cleanups in the cpufreq-pcc, intel_pstate, cpufreq-dt, pxa2xx cpufreq drivers (Lenny Szubowicz, Ethan Zhao, Stefan Wahren, Petr Cvek). - OPP (Operating Performance Points) framework modification to allow OPPs to be removed too and update of a few cpufreq drivers (cpufreq-dt, exynos5440, imx6q, cpufreq) to remove OPPs (added during initialization) on driver removal (Viresh Kumar). - Hibernation core fixes and cleanups (Tina Ruchandani and Markus Elfring). - PM Kconfig fix related to CPU power management (Pankaj Dubey). - cpupower tool fix (Prarit Bhargava)" * tag 'pm+acpi-3.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (120 commits) i2c-omap / PM: Drop CONFIG_PM_RUNTIME from i2c-omap.c dmaengine / PM: Replace CONFIG_PM_RUNTIME with CONFIG_PM tools: cpupower: fix return checks for sysfs_get_idlestate_count() drivers: sh / PM: Replace CONFIG_PM_RUNTIME with CONFIG_PM e1000e / igb / PM: Eliminate CONFIG_PM_RUNTIME MMC / PM: Replace CONFIG_PM_RUNTIME with CONFIG_PM MFD / PM: Replace CONFIG_PM_RUNTIME with CONFIG_PM misc / PM: Replace CONFIG_PM_RUNTIME with CONFIG_PM media / PM: Replace CONFIG_PM_RUNTIME with CONFIG_PM input / PM: Replace CONFIG_PM_RUNTIME with CONFIG_PM leds: leds-gpio: Fix multiple instances registration without 'label' property iio / PM: Replace CONFIG_PM_RUNTIME with CONFIG_PM hsi / OMAP / PM: Replace CONFIG_PM_RUNTIME with CONFIG_PM i2c-hid / PM: Replace CONFIG_PM_RUNTIME with CONFIG_PM drm / exynos / PM: Replace CONFIG_PM_RUNTIME with CONFIG_PM gpio / PM: Replace CONFIG_PM_RUNTIME with CONFIG_PM hwrandom / exynos / PM: Use CONFIG_PM in #ifdef block / PM: Replace CONFIG_PM_RUNTIME with CONFIG_PM USB / PM: Drop CONFIG_PM_RUNTIME from the USB core PM: Merge the SET*_RUNTIME_PM_OPS() macros ...
-rw-r--r--Documentation/ABI/stable/sysfs-bus-usb14
-rw-r--r--Documentation/ABI/testing/sysfs-bus-usb19
-rw-r--r--Documentation/acpi/gpio-properties.txt96
-rw-r--r--Documentation/cpu-freq/intel-pstate.txt37
-rw-r--r--Documentation/devicetree/bindings/arm/idle-states.txt20
-rw-r--r--Documentation/gpio/consumer.txt18
-rw-r--r--Documentation/kernel-parameters.txt3
-rw-r--r--Documentation/usb/power-management.txt17
-rw-r--r--MAINTAINERS10
-rw-r--r--arch/arm/include/asm/cpuidle.h1
-rw-r--r--arch/arm/mach-davinci/cpuidle.c1
-rw-r--r--arch/arm/mach-imx/cpuidle-imx5.c1
-rw-r--r--arch/arm/mach-imx/cpuidle-imx6q.c3
-rw-r--r--arch/arm/mach-imx/cpuidle-imx6sl.c3
-rw-r--r--arch/arm/mach-omap2/cpuidle34xx.c7
-rw-r--r--arch/arm/mach-omap2/cpuidle44xx.c5
-rw-r--r--arch/arm/mach-s3c24xx/h1940-bluetooth.c4
-rw-r--r--arch/arm/mach-s3c24xx/h1940.h4
-rw-r--r--arch/arm/mach-s3c24xx/mach-h1940.c3
-rw-r--r--arch/arm/mach-s3c24xx/mach-rx1950.c3
-rw-r--r--arch/arm/mach-s3c64xx/cpuidle.c1
-rw-r--r--arch/arm/mach-shmobile/pm-r8a7779.c3
-rw-r--r--arch/arm/mach-shmobile/pm-rmobile.c3
-rw-r--r--arch/arm/mach-shmobile/pm-sh7372.c4
-rw-r--r--arch/arm/mach-tegra/cpuidle-tegra114.c1
-rw-r--r--arch/arm/mach-tegra/cpuidle-tegra20.c3
-rw-r--r--arch/arm/mach-tegra/cpuidle-tegra30.c1
-rw-r--r--arch/arm/plat-orion/gpio.c3
-rw-r--r--arch/arm/plat-orion/include/plat/orion-gpio.h5
-rw-r--r--arch/ia64/Kconfig2
-rw-r--r--arch/mips/include/asm/idle.h1
-rw-r--r--arch/sh/Kconfig1
-rw-r--r--arch/sh/kernel/cpu/shmobile/cpuidle.c3
-rw-r--r--arch/x86/include/asm/cpufeature.h5
-rw-r--r--arch/x86/include/uapi/asm/msr-index.h41
-rw-r--r--arch/x86/kernel/apm_32.c1
-rw-r--r--arch/x86/kernel/cpu/scattered.c5
-rw-r--r--block/blk-core.c6
-rw-r--r--block/elevator.c2
-rw-r--r--drivers/acpi/Kconfig36
-rw-r--r--drivers/acpi/Makefile5
-rw-r--r--drivers/acpi/acpi_lpss.c98
-rw-r--r--drivers/acpi/acpica/acglobal.h1
-rw-r--r--drivers/acpi/acpica/aclocal.h4
-rw-r--r--drivers/acpi/acpica/evgpe.c9
-rw-r--r--drivers/acpi/acpica/hwgpe.c53
-rw-r--r--drivers/acpi/acpica/utresrc.c2
-rw-r--r--drivers/acpi/acpica/utxface.c4
-rw-r--r--drivers/acpi/acpica/utxfinit.c11
-rw-r--r--drivers/acpi/battery.c4
-rw-r--r--drivers/acpi/device_pm.c10
-rw-r--r--drivers/acpi/internal.h6
-rw-r--r--drivers/acpi/osl.c8
-rw-r--r--drivers/acpi/pci_irq.c2
-rw-r--r--drivers/acpi/pmic/intel_pmic.c354
-rw-r--r--drivers/acpi/pmic/intel_pmic.h25
-rw-r--r--drivers/acpi/pmic/intel_pmic_crc.c211
-rw-r--r--drivers/acpi/pmic/intel_pmic_xpower.c268
-rw-r--r--drivers/acpi/processor_idle.c20
-rw-r--r--drivers/acpi/property.c551
-rw-r--r--drivers/acpi/scan.c214
-rw-r--r--drivers/acpi/sleep.c2
-rw-r--r--drivers/acpi/tables.c68
-rw-r--r--drivers/acpi/utils.c5
-rw-r--r--drivers/acpi/video.c15
-rw-r--r--drivers/amba/bus.c2
-rw-r--r--drivers/base/Makefile2
-rw-r--r--drivers/base/power/clock_ops.c150
-rw-r--r--drivers/base/power/domain.c147
-rw-r--r--drivers/base/power/domain_governor.c11
-rw-r--r--drivers/base/power/opp.c196
-rw-r--r--drivers/base/power/power.h56
-rw-r--r--drivers/base/power/qos.c5
-rw-r--r--drivers/base/power/runtime.c76
-rw-r--r--drivers/base/power/sysfs.c19
-rw-r--r--drivers/base/property.c431
-rw-r--r--drivers/char/hw_random/exynos-rng.c2
-rw-r--r--drivers/cpufreq/Kconfig57
-rw-r--r--drivers/cpufreq/Kconfig.arm8
-rw-r--r--drivers/cpufreq/Makefile4
-rw-r--r--drivers/cpufreq/arm_big_little.c7
-rw-r--r--drivers/cpufreq/arm_big_little.h5
-rw-r--r--drivers/cpufreq/arm_big_little_dt.c1
-rw-r--r--drivers/cpufreq/cpufreq-dt.c66
-rw-r--r--drivers/cpufreq/cpufreq.c53
-rw-r--r--drivers/cpufreq/exynos5440-cpufreq.c5
-rw-r--r--drivers/cpufreq/imx6q-cpufreq.c11
-rw-r--r--drivers/cpufreq/intel_pstate.c146
-rw-r--r--drivers/cpufreq/ls1x-cpufreq.c223
-rw-r--r--drivers/cpufreq/pcc-cpufreq.c7
-rw-r--r--drivers/cpuidle/cpuidle-arm64.c14
-rw-r--r--drivers/cpuidle/cpuidle-at91.c1
-rw-r--r--drivers/cpuidle/cpuidle-big_little.c6
-rw-r--r--drivers/cpuidle/cpuidle-calxeda.c1
-rw-r--r--drivers/cpuidle/cpuidle-cps.c7
-rw-r--r--drivers/cpuidle/cpuidle-exynos.c1
-rw-r--r--drivers/cpuidle/cpuidle-kirkwood.c1
-rw-r--r--drivers/cpuidle/cpuidle-mvebu-v7.c8
-rw-r--r--drivers/cpuidle/cpuidle-powernv.c6
-rw-r--r--drivers/cpuidle/cpuidle-pseries.c3
-rw-r--r--drivers/cpuidle/cpuidle-ux500.c3
-rw-r--r--drivers/cpuidle/cpuidle-zynq.c1
-rw-r--r--drivers/cpuidle/driver.c1
-rw-r--r--drivers/cpuidle/dt_idle_states.c12
-rw-r--r--drivers/cpuidle/governors/ladder.c2
-rw-r--r--drivers/cpuidle/governors/menu.c2
-rw-r--r--drivers/dma/dw/core.c11
-rw-r--r--drivers/dma/nbpfaxi.c2
-rw-r--r--drivers/dma/ste_dma40.c2
-rw-r--r--drivers/dma/tegra20-apb-dma.c2
-rw-r--r--drivers/gpio/devres.c32
-rw-r--r--drivers/gpio/gpio-omap.c8
-rw-r--r--drivers/gpio/gpio-sch.c293
-rw-r--r--drivers/gpio/gpio-zynq.c2
-rw-r--r--drivers/gpio/gpiolib-acpi.c117
-rw-r--r--drivers/gpio/gpiolib.c85
-rw-r--r--drivers/gpio/gpiolib.h7
-rw-r--r--drivers/gpu/drm/exynos/exynos_drm_fimc.c2
-rw-r--r--drivers/gpu/drm/exynos/exynos_drm_g2d.c2
-rw-r--r--drivers/gpu/drm/exynos/exynos_drm_gsc.c2
-rw-r--r--drivers/gpu/drm/exynos/exynos_drm_rotator.c2
-rw-r--r--drivers/hid/i2c-hid/i2c-hid.c2
-rw-r--r--drivers/hsi/controllers/omap_ssi.c2
-rw-r--r--drivers/hsi/controllers/omap_ssi_port.c2
-rw-r--r--drivers/i2c/busses/i2c-hix5hd2.c2
-rw-r--r--drivers/i2c/busses/i2c-nomadik.c2
-rw-r--r--drivers/i2c/busses/i2c-omap.c2
-rw-r--r--drivers/i2c/i2c-core.c1
-rw-r--r--drivers/idle/intel_idle.c108
-rw-r--r--drivers/iio/accel/bmc150-accel.c4
-rw-r--r--drivers/iio/accel/kxcjk-1013.c4
-rw-r--r--drivers/iio/gyro/bmg160.c4
-rw-r--r--drivers/input/keyboard/gpio_keys_polled.c112
-rw-r--r--drivers/input/keyboard/samsung-keypad.c2
-rw-r--r--drivers/input/touchscreen/cyttsp4_core.c2
-rw-r--r--drivers/leds/leds-gpio.c150
-rw-r--r--drivers/media/platform/coda/coda-common.c4
-rw-r--r--drivers/media/platform/exynos4-is/fimc-core.c6
-rw-r--r--drivers/media/platform/exynos4-is/fimc-is-i2c.c2
-rw-r--r--drivers/media/platform/exynos4-is/fimc-lite.c2
-rw-r--r--drivers/media/platform/exynos4-is/mipi-csis.c2
-rw-r--r--drivers/media/platform/s5p-jpeg/jpeg-core.c4
-rw-r--r--drivers/media/platform/s5p-mfc/s5p_mfc.c2
-rw-r--r--drivers/media/platform/s5p-mfc/s5p_mfc_pm.c10
-rw-r--r--drivers/mfd/ab8500-gpadc.c2
-rw-r--r--drivers/mfd/arizona-core.c4
-rw-r--r--drivers/mfd/axp20x.c3
-rw-r--r--drivers/mfd/intel_soc_pmic_crc.c3
-rw-r--r--drivers/mfd/wm8994-core.c2
-rw-r--r--drivers/misc/apds990x.c4
-rw-r--r--drivers/misc/bh1770glc.c2
-rw-r--r--drivers/misc/eeprom/at25.c34
-rw-r--r--drivers/misc/lis3lv02d/lis3lv02d_i2c.c4
-rw-r--r--drivers/misc/mei/mei_dev.h4
-rw-r--r--drivers/misc/mei/pci-me.c8
-rw-r--r--drivers/misc/mei/pci-txe.c8
-rw-r--r--drivers/mmc/core/bus.c4
-rw-r--r--drivers/mmc/host/mmci.c2
-rw-r--r--drivers/mmc/host/sdhci-acpi.c2
-rw-r--r--drivers/mmc/host/sdhci-esdhc-imx.c4
-rw-r--r--drivers/mmc/host/sdhci-pci.c18
-rw-r--r--drivers/mmc/host/sdhci-pxav3.c2
-rw-r--r--drivers/mmc/host/sdhci-s3c.c6
-rw-r--r--drivers/mmc/host/sdhci.c7
-rw-r--r--drivers/mmc/host/sdhci.h3
-rw-r--r--drivers/mmc/host/sh_mobile_sdhi.c2
-rw-r--r--drivers/mmc/host/tmio_mmc.c2
-rw-r--r--drivers/net/ethernet/intel/e1000e/netdev.c2
-rw-r--r--drivers/net/ethernet/intel/igb/igb_main.c6
-rw-r--r--drivers/of/base.c33
-rw-r--r--drivers/pci/pci-driver.c20
-rw-r--r--drivers/pci/pci-sysfs.c4
-rw-r--r--drivers/pci/pcie/Kconfig2
-rw-r--r--drivers/powercap/Kconfig2
-rw-r--r--drivers/powercap/intel_rapl.c264
-rw-r--r--drivers/sh/pm_runtime.c4
-rw-r--r--drivers/spi/spi-pl022.c2
-rw-r--r--drivers/usb/core/driver.c6
-rw-r--r--drivers/usb/core/hcd-pci.c11
-rw-r--r--drivers/usb/core/hcd.c12
-rw-r--r--drivers/usb/core/hub.c6
-rw-r--r--drivers/usb/core/port.c4
-rw-r--r--drivers/usb/core/sysfs.c13
-rw-r--r--drivers/usb/core/usb.c4
-rw-r--r--drivers/usb/core/usb.h23
-rw-r--r--drivers/usb/host/ehci-pci.c2
-rw-r--r--drivers/usb/host/sl811-hcd.c5
-rw-r--r--drivers/usb/host/u132-hcd.c3
-rw-r--r--drivers/usb/host/xhci-hub.c2
-rw-r--r--drivers/usb/host/xhci.c29
-rw-r--r--drivers/usb/phy/phy-msm-usb.c2
-rw-r--r--include/acpi/acbuffer.h14
-rw-r--r--include/acpi/acpi_bus.h35
-rw-r--r--include/acpi/acpixf.h2
-rw-r--r--include/acpi/actypes.h4
-rw-r--r--include/acpi/processor.h7
-rw-r--r--include/linux/acpi.h167
-rw-r--r--include/linux/blkdev.h4
-rw-r--r--include/linux/cpufreq.h54
-rw-r--r--include/linux/cpuidle.h4
-rw-r--r--include/linux/gpio/consumer.h7
-rw-r--r--include/linux/gpio_keys.h3
-rw-r--r--include/linux/leds.h3
-rw-r--r--include/linux/of.h34
-rw-r--r--include/linux/pm.h19
-rw-r--r--include/linux/pm_clock.h8
-rw-r--r--include/linux/pm_domain.h17
-rw-r--r--include/linux/pm_opp.h12
-rw-r--r--include/linux/pm_qos.h38
-rw-r--r--include/linux/pm_runtime.h21
-rw-r--r--include/linux/property.h143
-rw-r--r--include/linux/usb.h2
-rw-r--r--include/linux/usb/hcd.h7
-rw-r--r--kernel/power/Kconfig7
-rw-r--r--kernel/power/hibernate.c14
-rw-r--r--kernel/power/power.h3
-rw-r--r--kernel/power/snapshot.c9
-rw-r--r--kernel/power/swap.c43
-rw-r--r--net/rfkill/rfkill-gpio.c18
-rw-r--r--tools/power/cpupower/utils/cpuidle-info.c8
220 files changed, 4877 insertions, 1526 deletions
diff --git a/Documentation/ABI/stable/sysfs-bus-usb b/Documentation/ABI/stable/sysfs-bus-usb
index e2bc700a6f9c..831f15d9672f 100644
--- a/Documentation/ABI/stable/sysfs-bus-usb
+++ b/Documentation/ABI/stable/sysfs-bus-usb
@@ -32,10 +32,9 @@ Date: January 2008
KernelVersion: 2.6.25
Contact: Sarah Sharp <sarah.a.sharp@intel.com>
Description:
- If CONFIG_PM_RUNTIME is enabled then this file
- is present. When read, it returns the total time (in msec)
- that the USB device has been connected to the machine. This
- file is read-only.
+ If CONFIG_PM is enabled, then this file is present. When read,
+ it returns the total time (in msec) that the USB device has been
+ connected to the machine. This file is read-only.
Users:
PowerTOP <powertop@lists.01.org>
https://01.org/powertop/
@@ -45,10 +44,9 @@ Date: January 2008
KernelVersion: 2.6.25
Contact: Sarah Sharp <sarah.a.sharp@intel.com>
Description:
- If CONFIG_PM_RUNTIME is enabled then this file
- is present. When read, it returns the total time (in msec)
- that the USB device has been active, i.e. not in a suspended
- state. This file is read-only.
+ If CONFIG_PM is enabled, then this file is present. When read,
+ it returns the total time (in msec) that the USB device has been
+ active, i.e. not in a suspended state. This file is read-only.
Tools can use this file and the connected_duration file to
compute the percentage of time that a device has been active.
diff --git a/Documentation/ABI/testing/sysfs-bus-usb b/Documentation/ABI/testing/sysfs-bus-usb
index 614d451cee41..e5cc7633d013 100644
--- a/Documentation/ABI/testing/sysfs-bus-usb
+++ b/Documentation/ABI/testing/sysfs-bus-usb
@@ -104,16 +104,15 @@ What: /sys/bus/usb/devices/.../power/usb2_hardware_lpm
Date: September 2011
Contact: Andiry Xu <andiry.xu@amd.com>
Description:
- If CONFIG_PM_RUNTIME is set and a USB 2.0 lpm-capable device
- is plugged in to a xHCI host which support link PM, it will
- perform a LPM test; if the test is passed and host supports
- USB2 hardware LPM (xHCI 1.0 feature), USB2 hardware LPM will
- be enabled for the device and the USB device directory will
- contain a file named power/usb2_hardware_lpm. The file holds
- a string value (enable or disable) indicating whether or not
- USB2 hardware LPM is enabled for the device. Developer can
- write y/Y/1 or n/N/0 to the file to enable/disable the
- feature.
+ If CONFIG_PM is set and a USB 2.0 lpm-capable device is plugged
+ in to a xHCI host which support link PM, it will perform a LPM
+ test; if the test is passed and host supports USB2 hardware LPM
+ (xHCI 1.0 feature), USB2 hardware LPM will be enabled for the
+ device and the USB device directory will contain a file named
+ power/usb2_hardware_lpm. The file holds a string value (enable
+ or disable) indicating whether or not USB2 hardware LPM is
+ enabled for the device. Developer can write y/Y/1 or n/N/0 to
+ the file to enable/disable the feature.
What: /sys/bus/usb/devices/.../removable
Date: February 2012
diff --git a/Documentation/acpi/gpio-properties.txt b/Documentation/acpi/gpio-properties.txt
new file mode 100644
index 000000000000..ae36fcf86dc7
--- /dev/null
+++ b/Documentation/acpi/gpio-properties.txt
@@ -0,0 +1,96 @@
+_DSD Device Properties Related to GPIO
+--------------------------------------
+
+With the release of ACPI 5.1 and the _DSD configuration objecte names
+can finally be given to GPIOs (and other things as well) returned by
+_CRS. Previously, we were only able to use an integer index to find
+the corresponding GPIO, which is pretty error prone (it depends on
+the _CRS output ordering, for example).
+
+With _DSD we can now query GPIOs using a name instead of an integer
+index, like the ASL example below shows:
+
+ // Bluetooth device with reset and shutdown GPIOs
+ Device (BTH)
+ {
+ Name (_HID, ...)
+
+ Name (_CRS, ResourceTemplate ()
+ {
+ GpioIo (Exclusive, PullUp, 0, 0, IoRestrictionInputOnly,
+ "\\_SB.GPO0", 0, ResourceConsumer) {15}
+ GpioIo (Exclusive, PullUp, 0, 0, IoRestrictionInputOnly,
+ "\\_SB.GPO0", 0, ResourceConsumer) {27, 31}
+ })
+
+ Name (_DSD, Package ()
+ {
+ ToUUID("daffd814-6eba-4d8c-8a91-bc9bbf4aa301"),
+ Package ()
+ {
+ Package () {"reset-gpio", Package() {^BTH, 1, 1, 0 }},
+ Package () {"shutdown-gpio", Package() {^BTH, 0, 0, 0 }},
+ }
+ })
+ }
+
+The format of the supported GPIO property is:
+
+ Package () { "name", Package () { ref, index, pin, active_low }}
+
+ ref - The device that has _CRS containing GpioIo()/GpioInt() resources,
+ typically this is the device itself (BTH in our case).
+ index - Index of the GpioIo()/GpioInt() resource in _CRS starting from zero.
+ pin - Pin in the GpioIo()/GpioInt() resource. Typically this is zero.
+ active_low - If 1 the GPIO is marked as active_low.
+
+Since ACPI GpioIo() resource does not have a field saying whether it is
+active low or high, the "active_low" argument can be used here. Setting
+it to 1 marks the GPIO as active low.
+
+In our Bluetooth example the "reset-gpio" refers to the second GpioIo()
+resource, second pin in that resource with the GPIO number of 31.
+
+ACPI GPIO Mappings Provided by Drivers
+--------------------------------------
+
+There are systems in which the ACPI tables do not contain _DSD but provide _CRS
+with GpioIo()/GpioInt() resources and device drivers still need to work with
+them.
+
+In those cases ACPI device identification objects, _HID, _CID, _CLS, _SUB, _HRV,
+available to the driver can be used to identify the device and that is supposed
+to be sufficient to determine the meaning and purpose of all of the GPIO lines
+listed by the GpioIo()/GpioInt() resources returned by _CRS. In other words,
+the driver is supposed to know what to use the GpioIo()/GpioInt() resources for
+once it has identified the device. Having done that, it can simply assign names
+to the GPIO lines it is going to use and provide the GPIO subsystem with a
+mapping between those names and the ACPI GPIO resources corresponding to them.
+
+To do that, the driver needs to define a mapping table as a NULL-terminated
+array of struct acpi_gpio_mapping objects that each contain a name, a pointer
+to an array of line data (struct acpi_gpio_params) objects and the size of that
+array. Each struct acpi_gpio_params object consists of three fields,
+crs_entry_index, line_index, active_low, representing the index of the target
+GpioIo()/GpioInt() resource in _CRS starting from zero, the index of the target
+line in that resource starting from zero, and the active-low flag for that line,
+respectively, in analogy with the _DSD GPIO property format specified above.
+
+For the example Bluetooth device discussed previously the data structures in
+question would look like this:
+
+static const struct acpi_gpio_params reset_gpio = { 1, 1, false };
+static const struct acpi_gpio_params shutdown_gpio = { 0, 0, false };
+
+static const struct acpi_gpio_mapping bluetooth_acpi_gpios[] = {
+ { "reset-gpio", &reset_gpio, 1 },
+ { "shutdown-gpio", &shutdown_gpio, 1 },
+ { },
+};
+
+Next, the mapping table needs to be passed as the second argument to
+acpi_dev_add_driver_gpios() that will register it with the ACPI device object
+pointed to by its first argument. That should be done in the driver's .probe()
+routine. On removal, the driver should unregister its GPIO mapping table by
+calling acpi_dev_remove_driver_gpios() on the ACPI device object where that
+table was previously registered.
diff --git a/Documentation/cpu-freq/intel-pstate.txt b/Documentation/cpu-freq/intel-pstate.txt
index a69ffe1d54d5..765d7fc0e692 100644
--- a/Documentation/cpu-freq/intel-pstate.txt
+++ b/Documentation/cpu-freq/intel-pstate.txt
@@ -1,17 +1,28 @@
Intel P-state driver
--------------------
-This driver implements a scaling driver with an internal governor for
-Intel Core processors. The driver follows the same model as the
-Transmeta scaling driver (longrun.c) and implements the setpolicy()
-instead of target(). Scaling drivers that implement setpolicy() are
-assumed to implement internal governors by the cpufreq core. All the
-logic for selecting the current P state is contained within the
-driver; no external governor is used by the cpufreq core.
-
-Intel SandyBridge+ processors are supported.
-
-New sysfs files for controlling P state selection have been added to
+This driver provides an interface to control the P state selection for
+SandyBridge+ Intel processors. The driver can operate two different
+modes based on the processor model legacy and Hardware P state (HWP)
+mode.
+
+In legacy mode the driver implements a scaling driver with an internal
+governor for Intel Core processors. The driver follows the same model
+as the Transmeta scaling driver (longrun.c) and implements the
+setpolicy() instead of target(). Scaling drivers that implement
+setpolicy() are assumed to implement internal governors by the cpufreq
+core. All the logic for selecting the current P state is contained
+within the driver; no external governor is used by the cpufreq core.
+
+In HWP mode P state selection is implemented in the processor
+itself. The driver provides the interfaces between the cpufreq core and
+the processor to control P state selection based on user preferences
+and reporting frequency to the cpufreq core. In this mode the
+internal governor code is disabled.
+
+In addtion to the interfaces provided by the cpufreq core for
+controlling frequency the driver provides sysfs files for
+controlling P state selection. These files have been added to
/sys/devices/system/cpu/intel_pstate/
max_perf_pct: limits the maximum P state that will be requested by
@@ -33,7 +44,9 @@ frequency is fiction for Intel Core processors. Even if the scaling
driver selects a single P state the actual frequency the processor
will run at is selected by the processor itself.
-New debugfs files have also been added to /sys/kernel/debug/pstate_snb/
+For legacy mode debugfs files have also been added to allow tuning of
+the internal governor algorythm. These files are located at
+/sys/kernel/debug/pstate_snb/ These files are NOT present in HWP mode.
deadband
d_gain_pct
diff --git a/Documentation/devicetree/bindings/arm/idle-states.txt b/Documentation/devicetree/bindings/arm/idle-states.txt
index 37375c7f3ccc..a8274eabae2e 100644
--- a/Documentation/devicetree/bindings/arm/idle-states.txt
+++ b/Documentation/devicetree/bindings/arm/idle-states.txt
@@ -317,6 +317,26 @@ follows:
In such systems entry-latency-us + exit-latency-us
will exceed wakeup-latency-us by this duration.
+ - status:
+ Usage: Optional
+ Value type: <string>
+ Definition: A standard device tree property [5] that indicates
+ the operational status of an idle-state.
+ If present, it shall be:
+ "okay": to indicate that the idle state is
+ operational.
+ "disabled": to indicate that the idle state has
+ been disabled in firmware so it is not
+ operational.
+ If the property is not present the idle-state must
+ be considered operational.
+
+ - idle-state-name:
+ Usage: Optional
+ Value type: <string>
+ Definition: A string used as a descriptive name for the idle
+ state.
+
In addition to the properties listed above, a state node may require
additional properties specifics to the entry-method defined in the
idle-states node, please refer to the entry-method bindings
diff --git a/Documentation/gpio/consumer.txt b/Documentation/gpio/consumer.txt
index 6ce544191ca6..859918db36b8 100644
--- a/Documentation/gpio/consumer.txt
+++ b/Documentation/gpio/consumer.txt
@@ -219,6 +219,24 @@ part of the IRQ interface, e.g. IRQF_TRIGGER_FALLING, as are system wakeup
capabilities.
+GPIOs and ACPI
+==============
+
+On ACPI systems, GPIOs are described by GpioIo()/GpioInt() resources listed by
+the _CRS configuration objects of devices. Those resources do not provide
+connection IDs (names) for GPIOs, so it is necessary to use an additional
+mechanism for this purpose.
+
+Systems compliant with ACPI 5.1 or newer may provide a _DSD configuration object
+which, among other things, may be used to provide connection IDs for specific
+GPIOs described by the GpioIo()/GpioInt() resources in _CRS. If that is the
+case, it will be handled by the GPIO subsystem automatically. However, if the
+_DSD is not present, the mappings between GpioIo()/GpioInt() resources and GPIO
+connection IDs need to be provided by device drivers.
+
+For details refer to Documentation/acpi/gpio-properties.txt
+
+
Interacting With the Legacy GPIO Subsystem
==========================================
Many kernel subsystems still handle GPIOs using the legacy integer-based
diff --git a/Documentation/kernel-parameters.txt b/Documentation/kernel-parameters.txt
index 32ba9ea5934a..eacb2e0397ae 100644
--- a/Documentation/kernel-parameters.txt
+++ b/Documentation/kernel-parameters.txt
@@ -1446,6 +1446,9 @@ bytes respectively. Such letter suffixes can also be entirely omitted.
disable
Do not enable intel_pstate as the default
scaling driver for the supported processors
+ no_hwp
+ Do not enable hardware P state control (HWP)
+ if available.
intremap= [X86-64, Intel-IOMMU]
on enable Interrupt Remapping (default)
diff --git a/Documentation/usb/power-management.txt b/Documentation/usb/power-management.txt
index 7b90fe034c4b..b5f83911732a 100644
--- a/Documentation/usb/power-management.txt
+++ b/Documentation/usb/power-management.txt
@@ -47,14 +47,15 @@ dynamic PM is implemented in the USB subsystem, although system PM is
covered to some extent (see Documentation/power/*.txt for more
information about system PM).
-Note: Dynamic PM support for USB is present only if the kernel was
-built with CONFIG_USB_SUSPEND enabled (which depends on
-CONFIG_PM_RUNTIME). System PM support is present only if the kernel
-was built with CONFIG_SUSPEND or CONFIG_HIBERNATION enabled.
-
-(Starting with the 3.10 kernel release, dynamic PM support for USB is
-present whenever the kernel was built with CONFIG_PM_RUNTIME enabled.
-The CONFIG_USB_SUSPEND option has been eliminated.)
+System PM support is present only if the kernel was built with CONFIG_SUSPEND
+or CONFIG_HIBERNATION enabled. Dynamic PM support for USB is present whenever
+the kernel was built with CONFIG_PM enabled.
+
+[Historically, dynamic PM support for USB was present only if the
+kernel had been built with CONFIG_USB_SUSPEND enabled (which depended on
+CONFIG_PM_RUNTIME). Starting with the 3.10 kernel release, dynamic PM support
+for USB was present whenever the kernel was built with CONFIG_PM_RUNTIME
+enabled. The CONFIG_USB_SUSPEND option had been eliminated.]
What is Remote Wakeup?
diff --git a/MAINTAINERS b/MAINTAINERS
index 47d64dcaa433..c8927bc7748e 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -2655,6 +2655,16 @@ T: git git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm.git
S: Maintained
F: drivers/cpuidle/cpuidle-big_little.c
+CPUIDLE DRIVER - ARM EXYNOS
+M: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
+M: Daniel Lezcano <daniel.lezcano@linaro.org>
+M: Kukjin Kim <kgene@kernel.org>
+L: linux-pm@vger.kernel.org
+L: linux-samsung-soc@vger.kernel.org
+S: Supported
+F: drivers/cpuidle/cpuidle-exynos.c
+F: arch/arm/mach-exynos/pm.c
+
CPUIDLE DRIVERS
M: Rafael J. Wysocki <rjw@rjwysocki.net>
M: Daniel Lezcano <daniel.lezcano@linaro.org>
diff --git a/arch/arm/include/asm/cpuidle.h b/arch/arm/include/asm/cpuidle.h
index 2fca60ab513a..af319ac4960c 100644
--- a/arch/arm/include/asm/cpuidle.h
+++ b/arch/arm/include/asm/cpuidle.h
@@ -15,7 +15,6 @@ static inline int arm_cpuidle_simple_enter(struct cpuidle_device *dev,
.exit_latency = 1,\
.target_residency = 1,\
.power_usage = p,\
- .flags = CPUIDLE_FLAG_TIME_VALID,\
.name = "WFI",\
.desc = "ARM WFI",\
}
diff --git a/arch/arm/mach-davinci/cpuidle.c b/arch/arm/mach-davinci/cpuidle.c
index f1ac1c94ac0f..b4675fc28f83 100644
--- a/arch/arm/mach-davinci/cpuidle.c
+++ b/arch/arm/mach-davinci/cpuidle.c
@@ -66,7 +66,6 @@ static struct cpuidle_driver davinci_idle_driver = {
.enter = davinci_enter_idle,
.exit_latency = 10,
.target_residency = 10000,
- .flags = CPUIDLE_FLAG_TIME_VALID,
.name = "DDR SR",
.desc = "WFI and DDR Self Refresh",
},
diff --git a/arch/arm/mach-imx/cpuidle-imx5.c b/arch/arm/mach-imx/cpuidle-imx5.c
index 5a47e3c6172f..3feca526d16b 100644
--- a/arch/arm/mach-imx/cpuidle-imx5.c
+++ b/arch/arm/mach-imx/cpuidle-imx5.c
@@ -24,7 +24,6 @@ static struct cpuidle_driver imx5_cpuidle_driver = {
.enter = imx5_cpuidle_enter,
.exit_latency = 2,
.target_residency = 1,
- .flags = CPUIDLE_FLAG_TIME_VALID,
.name = "IMX5 SRPG",
.desc = "CPU state retained,powered off",
},
diff --git a/arch/arm/mach-imx/cpuidle-imx6q.c b/arch/arm/mach-imx/cpuidle-imx6q.c
index aa935787b743..d76d08623f9f 100644
--- a/arch/arm/mach-imx/cpuidle-imx6q.c
+++ b/arch/arm/mach-imx/cpuidle-imx6q.c
@@ -53,8 +53,7 @@ static struct cpuidle_driver imx6q_cpuidle_driver = {
{
.exit_latency = 50,
.target_residency = 75,
- .flags = CPUIDLE_FLAG_TIME_VALID |
- CPUIDLE_FLAG_TIMER_STOP,
+ .flags = CPUIDLE_FLAG_TIMER_STOP,
.enter = imx6q_enter_wait,
.name = "WAIT",
.desc = "Clock off",
diff --git a/arch/arm/mach-imx/cpuidle-imx6sl.c b/arch/arm/mach-imx/cpuidle-imx6sl.c
index d4b6b8171fa9..7d92e6584551 100644
--- a/arch/arm/mach-imx/cpuidle-imx6sl.c
+++ b/arch/arm/mach-imx/cpuidle-imx6sl.c
@@ -40,8 +40,7 @@ static struct cpuidle_driver imx6sl_cpuidle_driver = {
{
.exit_latency = 50,
.target_residency = 75,
- .flags = CPUIDLE_FLAG_TIME_VALID |
- CPUIDLE_FLAG_TIMER_STOP,
+ .flags = CPUIDLE_FLAG_TIMER_STOP,
.enter = imx6sl_enter_wait,
.name = "WAIT",
.desc = "Clock off",
diff --git a/arch/arm/mach-omap2/cpuidle34xx.c b/arch/arm/mach-omap2/cpuidle34xx.c
index e18709d3b95d..aa7b379e2661 100644
--- a/arch/arm/mach-omap2/cpuidle34xx.c
+++ b/arch/arm/mach-omap2/cpuidle34xx.c
@@ -265,7 +265,6 @@ static struct cpuidle_driver omap3_idle_driver = {
.enter = omap3_enter_idle_bm,
.exit_latency = 2 + 2,
.target_residency = 5,
- .flags = CPUIDLE_FLAG_TIME_VALID,
.name = "C1",
.desc = "MPU ON + CORE ON",
},
@@ -273,7 +272,6 @@ static struct cpuidle_driver omap3_idle_driver = {
.enter = omap3_enter_idle_bm,
.exit_latency = 10 + 10,
.target_residency = 30,
- .flags = CPUIDLE_FLAG_TIME_VALID,
.name = "C2",
.desc = "MPU ON + CORE ON",
},
@@ -281,7 +279,6 @@ static struct cpuidle_driver omap3_idle_driver = {
.enter = omap3_enter_idle_bm,
.exit_latency = 50 + 50,
.target_residency = 300,
- .flags = CPUIDLE_FLAG_TIME_VALID,
.name = "C3",
.desc = "MPU RET + CORE ON",
},
@@ -289,7 +286,6 @@ static struct cpuidle_driver omap3_idle_driver = {
.enter = omap3_enter_idle_bm,
.exit_latency = 1500 + 1800,
.target_residency = 4000,
- .flags = CPUIDLE_FLAG_TIME_VALID,
.name = "C4",
.desc = "MPU OFF + CORE ON",
},
@@ -297,7 +293,6 @@ static struct cpuidle_driver omap3_idle_driver = {
.enter = omap3_enter_idle_bm,
.exit_latency = 2500 + 7500,
.target_residency = 12000,
- .flags = CPUIDLE_FLAG_TIME_VALID,
.name = "C5",
.desc = "MPU RET + CORE RET",
},
@@ -305,7 +300,6 @@ static struct cpuidle_driver omap3_idle_driver = {
.enter = omap3_enter_idle_bm,
.exit_latency = 3000 + 8500,
.target_residency = 15000,
- .flags = CPUIDLE_FLAG_TIME_VALID,
.name = "C6",
.desc = "MPU OFF + CORE RET",
},
@@ -313,7 +307,6 @@ static struct cpuidle_driver omap3_idle_driver = {
.enter = omap3_enter_idle_bm,
.exit_latency = 10000 + 30000,
.target_residency = 30000,
- .flags = CPUIDLE_FLAG_TIME_VALID,
.name = "C7",
.desc = "MPU OFF + CORE OFF",
},
diff --git a/arch/arm/mach-omap2/cpuidle44xx.c b/arch/arm/mach-omap2/cpuidle44xx.c
index 2498ab025fa2..01e398a868bc 100644
--- a/arch/arm/mach-omap2/cpuidle44xx.c
+++ b/arch/arm/mach-omap2/cpuidle44xx.c
@@ -196,7 +196,6 @@ static struct cpuidle_driver omap4_idle_driver = {
/* C1 - CPU0 ON + CPU1 ON + MPU ON */
.exit_latency = 2 + 2,
.target_residency = 5,
- .flags = CPUIDLE_FLAG_TIME_VALID,
.enter = omap_enter_idle_simple,
.name = "C1",
.desc = "CPUx ON, MPUSS ON"
@@ -205,7 +204,7 @@ static struct cpuidle_driver omap4_idle_driver = {
/* C2 - CPU0 OFF + CPU1 OFF + MPU CSWR */
.exit_latency = 328 + 440,
.target_residency = 960,
- .flags = CPUIDLE_FLAG_TIME_VALID | CPUIDLE_FLAG_COUPLED,
+ .flags = CPUIDLE_FLAG_COUPLED,
.enter = omap_enter_idle_coupled,
.name = "C2",
.desc = "CPUx OFF, MPUSS CSWR",
@@ -214,7 +213,7 @@ static struct cpuidle_driver omap4_idle_driver = {
/* C3 - CPU0 OFF + CPU1 OFF + MPU OSWR */
.exit_latency = 460 + 518,
.target_residency = 1100,
- .flags = CPUIDLE_FLAG_TIME_VALID | CPUIDLE_FLAG_COUPLED,
+ .flags = CPUIDLE_FLAG_COUPLED,
.enter = omap_enter_idle_coupled,
.name = "C3",
.desc = "CPUx OFF, MPUSS OSWR",
diff --git a/arch/arm/mach-s3c24xx/h1940-bluetooth.c b/arch/arm/mach-s3c24xx/h1940-bluetooth.c
index b4d14b864367..9c8b1279a4ba 100644
--- a/arch/arm/mach-s3c24xx/h1940-bluetooth.c
+++ b/arch/arm/mach-s3c24xx/h1940-bluetooth.c
@@ -41,7 +41,7 @@ static void h1940bt_enable(int on)
mdelay(10);
gpio_set_value(S3C2410_GPH(1), 0);
- h1940_led_blink_set(-EINVAL, GPIO_LED_BLINK, NULL, NULL);
+ h1940_led_blink_set(NULL, GPIO_LED_BLINK, NULL, NULL);
}
else {
gpio_set_value(S3C2410_GPH(1), 1);
@@ -50,7 +50,7 @@ static void h1940bt_enable(int on)
mdelay(10);
gpio_set_value(H1940_LATCH_BLUETOOTH_POWER, 0);
- h1940_led_blink_set(-EINVAL, GPIO_LED_NO_BLINK_LOW, NULL, NULL);
+ h1940_led_blink_set(NULL, GPIO_LED_NO_BLINK_LOW, NULL, NULL);
}
}
diff --git a/arch/arm/mach-s3c24xx/h1940.h b/arch/arm/mach-s3c24xx/h1940.h
index 2950cc466840..596d9f64c5b6 100644
--- a/arch/arm/mach-s3c24xx/h1940.h
+++ b/arch/arm/mach-s3c24xx/h1940.h
@@ -19,8 +19,10 @@
#define H1940_SUSPEND_RESUMEAT (0x30081000)
#define H1940_SUSPEND_CHECK (0x30080000)
+struct gpio_desc;
+
extern void h1940_pm_return(void);
-extern int h1940_led_blink_set(unsigned gpio, int state,
+extern int h1940_led_blink_set(struct gpio_desc *desc, int state,
unsigned long *delay_on,
unsigned long *delay_off);
diff --git a/arch/arm/mach-s3c24xx/mach-h1940.c b/arch/arm/mach-s3c24xx/mach-h1940.c
index d35ddc1d9991..d40d4f5244c6 100644
--- a/arch/arm/mach-s3c24xx/mach-h1940.c
+++ b/arch/arm/mach-s3c24xx/mach-h1940.c
@@ -359,10 +359,11 @@ static struct platform_device h1940_battery = {
static DEFINE_SPINLOCK(h1940_blink_spin);
-int h1940_led_blink_set(unsigned gpio, int state,
+int h1940_led_blink_set(struct gpio_desc *desc, int state,
unsigned long *delay_on, unsigned long *delay_off)
{
int blink_gpio, check_gpio1, check_gpio2;
+ int gpio = desc ? desc_to_gpio(desc) : -EINVAL;
switch (gpio) {
case H1940_LATCH_LED_GREEN:
diff --git a/arch/arm/mach-s3c24xx/mach-rx1950.c b/arch/arm/mach-s3c24xx/mach-rx1950.c
index c3f2682d0c62..1d35ff375a01 100644
--- a/arch/arm/mach-s3c24xx/mach-rx1950.c
+++ b/arch/arm/mach-s3c24xx/mach-rx1950.c
@@ -250,9 +250,10 @@ static void rx1950_disable_charger(void)
static DEFINE_SPINLOCK(rx1950_blink_spin);
-static int rx1950_led_blink_set(unsigned gpio, int state,
+static int rx1950_led_blink_set(struct gpio_desc *desc, int state,
unsigned long *delay_on, unsigned long *delay_off)
{
+ int gpio = desc_to_gpio(desc);
int blink_gpio, check_gpio;
switch (gpio) {
diff --git a/arch/arm/mach-s3c64xx/cpuidle.c b/arch/arm/mach-s3c64xx/cpuidle.c
index 3c8ab07c2012..2eb072440dfa 100644
--- a/arch/arm/mach-s3c64xx/cpuidle.c
+++ b/arch/arm/mach-s3c64xx/cpuidle.c
@@ -48,7 +48,6 @@ static struct cpuidle_driver s3c64xx_cpuidle_driver = {
.enter = s3c64xx_enter_idle,
.exit_latency = 1,
.target_residency = 1,
- .flags = CPUIDLE_FLAG_TIME_VALID,
.name = "IDLE",
.desc = "System active, ARM gated",
},
diff --git a/arch/arm/mach-shmobile/pm-r8a7779.c b/arch/arm/mach-shmobile/pm-r8a7779.c
index 82fe3d7f9662..44a74c4c5a01 100644
--- a/arch/arm/mach-shmobile/pm-r8a7779.c
+++ b/arch/arm/mach-shmobile/pm-r8a7779.c
@@ -83,9 +83,8 @@ static void r8a7779_init_pm_domain(struct r8a7779_pm_domain *r8a7779_pd)
{
struct generic_pm_domain *genpd = &r8a7779_pd->genpd;
+ genpd->flags = GENPD_FLAG_PM_CLK;
pm_genpd_init(genpd, NULL, false);
- genpd->dev_ops.stop = pm_clk_suspend;
- genpd->dev_ops.start = pm_clk_resume;
genpd->dev_ops.active_wakeup = pd_active_wakeup;
genpd->power_off = pd_power_down;
genpd->power_on = pd_power_up;
diff --git a/arch/arm/mach-shmobile/pm-rmobile.c b/arch/arm/mach-shmobile/pm-rmobile.c
index 717e6413d29c..6f7d56ecf969 100644
--- a/arch/arm/mach-shmobile/pm-rmobile.c
+++ b/arch/arm/mach-shmobile/pm-rmobile.c
@@ -106,9 +106,8 @@ static void rmobile_init_pm_domain(struct rmobile_pm_domain *rmobile_pd)
struct generic_pm_domain *genpd = &rmobile_pd->genpd;
struct dev_power_governor *gov = rmobile_pd->gov;
+ genpd->flags = GENPD_FLAG_PM_CLK;
pm_genpd_init(genpd, gov ? : &simple_qos_governor, false);
- genpd->dev_ops.stop = pm_clk_suspend;
- genpd->dev_ops.start = pm_clk_resume;
genpd->dev_ops.active_wakeup = rmobile_pd_active_wakeup;
genpd->power_off = rmobile_pd_power_down;
genpd->power_on = rmobile_pd_power_up;
diff --git a/arch/arm/mach-shmobile/pm-sh7372.c b/arch/arm/mach-shmobile/pm-sh7372.c
index 7e5c2676c489..0e37da654ed5 100644
--- a/arch/arm/mach-shmobile/pm-sh7372.c
+++ b/arch/arm/mach-shmobile/pm-sh7372.c
@@ -423,7 +423,6 @@ static struct cpuidle_driver sh7372_cpuidle_driver = {
.desc = "Core Standby Mode",
.exit_latency = 10,
.target_residency = 20 + 10,
- .flags = CPUIDLE_FLAG_TIME_VALID,
.enter = sh7372_enter_core_standby,
},
.states[2] = {
@@ -431,7 +430,6 @@ static struct cpuidle_driver sh7372_cpuidle_driver = {
.desc = "A3SM PLL ON",
.exit_latency = 20,
.target_residency = 30 + 20,
- .flags = CPUIDLE_FLAG_TIME_VALID,
.enter = sh7372_enter_a3sm_pll_on,
},
.states[3] = {
@@ -439,7 +437,6 @@ static struct cpuidle_driver sh7372_cpuidle_driver = {
.desc = "A3SM PLL OFF",
.exit_latency = 120,
.target_residency = 30 + 120,
- .flags = CPUIDLE_FLAG_TIME_VALID,
.enter = sh7372_enter_a3sm_pll_off,
},
.states[4] = {
@@ -447,7 +444,6 @@ static struct cpuidle_driver sh7372_cpuidle_driver = {
.desc = "A4S PLL OFF",
.exit_latency = 240,
.target_residency = 30 + 240,
- .flags = CPUIDLE_FLAG_TIME_VALID,
.enter = sh7372_enter_a4s,
.disabled = true,
},
diff --git a/arch/arm/mach-tegra/cpuidle-tegra114.c b/arch/arm/mach-tegra/cpuidle-tegra114.c
index 425b6c8f0cb0..f2b586d7b15d 100644
--- a/arch/arm/mach-tegra/cpuidle-tegra114.c
+++ b/arch/arm/mach-tegra/cpuidle-tegra114.c
@@ -75,7 +75,6 @@ static struct cpuidle_driver tegra_idle_driver = {
.exit_latency = 500,
.target_residency = 1000,
.power_usage = 0,
- .flags = CPUIDLE_FLAG_TIME_VALID,
.name = "powered-down",
.desc = "CPU power gated",
},
diff --git a/arch/arm/mach-tegra/cpuidle-tegra20.c b/arch/arm/mach-tegra/cpuidle-tegra20.c
index b30bf5cba65b..4f25a7c7ca0f 100644
--- a/arch/arm/mach-tegra/cpuidle-tegra20.c
+++ b/arch/arm/mach-tegra/cpuidle-tegra20.c
@@ -59,8 +59,7 @@ static struct cpuidle_driver tegra_idle_driver = {
.exit_latency = 5000,
.target_residency = 10000,
.power_usage = 0,
- .flags = CPUIDLE_FLAG_TIME_VALID |
- CPUIDLE_FLAG_COUPLED,
+ .flags = CPUIDLE_FLAG_COUPLED,
.name = "powered-down",
.desc = "CPU power gated",
},
diff --git a/arch/arm/mach-tegra/cpuidle-tegra30.c b/arch/arm/mach-tegra/cpuidle-tegra30.c
index 35561274f6cf..f8815ed65d9d 100644
--- a/arch/arm/mach-tegra/cpuidle-tegra30.c
+++ b/arch/arm/mach-tegra/cpuidle-tegra30.c
@@ -56,7 +56,6 @@ static struct cpuidle_driver tegra_idle_driver = {
.exit_latency = 2000,
.target_residency = 2200,
.power_usage = 0,
- .flags = CPUIDLE_FLAG_TIME_VALID,
.name = "powered-down",
.desc = "CPU power gated",
},
diff --git a/arch/arm/plat-orion/gpio.c b/arch/arm/plat-orion/gpio.c
index 14f6e647c739..5168a52a17f9 100644
--- a/arch/arm/plat-orion/gpio.c
+++ b/arch/arm/plat-orion/gpio.c
@@ -306,9 +306,10 @@ EXPORT_SYMBOL(orion_gpio_set_blink);
#define ORION_BLINK_HALF_PERIOD 100 /* ms */
-int orion_gpio_led_blink_set(unsigned gpio, int state,
+int orion_gpio_led_blink_set(struct gpio_desc *desc, int state,
unsigned long *delay_on, unsigned long *delay_off)
{
+ unsigned gpio = desc_to_gpio(desc);
if (delay_on && delay_off && !*delay_on && !*delay_off)
*delay_on = *delay_off = ORION_BLINK_HALF_PERIOD;
diff --git a/arch/arm/plat-orion/include/plat/orion-gpio.h b/arch/arm/plat-orion/include/plat/orion-gpio.h
index e763988b04b9..e856b073a9c8 100644
--- a/arch/arm/plat-orion/include/plat/orion-gpio.h
+++ b/arch/arm/plat-orion/include/plat/orion-gpio.h
@@ -14,12 +14,15 @@
#include <linux/init.h>
#include <linux/types.h>
#include <linux/irqdomain.h>
+
+struct gpio_desc;
+
/*
* Orion-specific GPIO API extensions.
*/
void orion_gpio_set_unused(unsigned pin);
void orion_gpio_set_blink(unsigned pin, int blink);
-int orion_gpio_led_blink_set(unsigned gpio, int state,
+int orion_gpio_led_blink_set(struct gpio_desc *desc, int state,
unsigned long *delay_on, unsigned long *delay_off);
#define GPIO_INPUT_OK (1 << 0)
diff --git a/arch/ia64/Kconfig b/arch/ia64/Kconfig
index c84c88bbbbd7..536d13b0bea6 100644
--- a/arch/ia64/Kconfig
+++ b/arch/ia64/Kconfig
@@ -11,7 +11,6 @@ config IA64
select PCI if (!IA64_HP_SIM)
select ACPI if (!IA64_HP_SIM)
select ARCH_MIGHT_HAVE_ACPI_PDC if ACPI
- select PM if (!IA64_HP_SIM)
select HAVE_UNSTABLE_SCHED_CLOCK
select HAVE_IDE
select HAVE_OPROFILE
@@ -233,6 +232,7 @@ config IA64_SGI_UV
config IA64_HP_SIM
bool "Ski-simulator"
select SWIOTLB
+ depends on !PM_RUNTIME
endchoice
diff --git a/arch/mips/include/asm/idle.h b/arch/mips/include/asm/idle.h
index 1c967abd545c..a2d18ab57ac6 100644
--- a/arch/mips/include/asm/idle.h
+++ b/arch/mips/include/asm/idle.h
@@ -22,7 +22,6 @@ extern int mips_cpuidle_wait_enter(struct cpuidle_device *dev,
.exit_latency = 1,\
.target_residency = 1,\
.power_usage = UINT_MAX,\
- .flags = CPUIDLE_FLAG_TIME_VALID,\
.name = "wait",\
.desc = "MIPS wait",\
}
diff --git a/arch/sh/Kconfig b/arch/sh/Kconfig
index 244fb4c81e25..a1403470f80e 100644
--- a/arch/sh/Kconfig
+++ b/arch/sh/Kconfig
@@ -222,7 +222,6 @@ config CPU_SHX3
config ARCH_SHMOBILE
bool
select ARCH_SUSPEND_POSSIBLE
- select PM
select PM_RUNTIME
config CPU_HAS_PMU
diff --git a/arch/sh/kernel/cpu/shmobile/cpuidle.c b/arch/sh/kernel/cpu/shmobile/cpuidle.c
index e3abfd4277e2..53b8eeb1db20 100644
--- a/arch/sh/kernel/cpu/shmobile/cpuidle.c
+++ b/arch/sh/kernel/cpu/shmobile/cpuidle.c
@@ -59,7 +59,6 @@ static struct cpuidle_driver cpuidle_driver = {
.exit_latency = 1,
.target_residency = 1 * 2,
.power_usage = 3,
- .flags = CPUIDLE_FLAG_TIME_VALID,
.enter = cpuidle_sleep_enter,
.name = "C1",
.desc = "SuperH Sleep Mode",
@@ -68,7 +67,6 @@ static struct cpuidle_driver cpuidle_driver = {
.exit_latency = 100,
.target_residency = 1 * 2,
.power_usage = 1,
- .flags = CPUIDLE_FLAG_TIME_VALID,
.enter = cpuidle_sleep_enter,
.name = "C2",
.desc = "SuperH Sleep Mode [SF]",
@@ -78,7 +76,6 @@ static struct cpuidle_driver cpuidle_driver = {
.exit_latency = 2300,
.target_residency = 1 * 2,
.power_usage = 1,
- .flags = CPUIDLE_FLAG_TIME_VALID,
.enter = cpuidle_sleep_enter,
.name = "C3",
.desc = "SuperH Mobile Standby Mode [SF]",
diff --git a/arch/x86/include/asm/cpufeature.h b/arch/x86/include/asm/cpufeature.h
index 0bb1335313b2..aede2c347bde 100644
--- a/arch/x86/include/asm/cpufeature.h
+++ b/arch/x86/include/asm/cpufeature.h
@@ -189,6 +189,11 @@
#define X86_FEATURE_DTHERM ( 7*32+ 7) /* Digital Thermal Sensor */
#define X86_FEATURE_HW_PSTATE ( 7*32+ 8) /* AMD HW-PState */
#define X86_FEATURE_PROC_FEEDBACK ( 7*32+ 9) /* AMD ProcFeedbackInterface */
+#define X86_FEATURE_HWP ( 7*32+ 10) /* "hwp" Intel HWP */
+#define X86_FEATURE_HWP_NOITFY ( 7*32+ 11) /* Intel HWP_NOTIFY */
+#define X86_FEATURE_HWP_ACT_WINDOW ( 7*32+ 12) /* Intel HWP_ACT_WINDOW */
+#define X86_FEATURE_HWP_EPP ( 7*32+13) /* Intel HWP_EPP */
+#define X86_FEATURE_HWP_PKG_REQ ( 7*32+14) /* Intel HWP_PKG_REQ */
/* Virtualization flags: Linux defined, word 8 */
#define X86_FEATURE_TPR_SHADOW ( 8*32+ 0) /* Intel TPR Shadow */
diff --git a/arch/x86/include/uapi/asm/msr-index.h b/arch/x86/include/uapi/asm/msr-index.h
index 8f02f6990759..c8aa65d56027 100644
--- a/arch/x86/include/uapi/asm/msr-index.h
+++ b/arch/x86/include/uapi/asm/msr-index.h
@@ -152,6 +152,45 @@
#define MSR_CC6_DEMOTION_POLICY_CONFIG 0x00000668
#define MSR_MC6_DEMOTION_POLICY_CONFIG 0x00000669
+/* Hardware P state interface */
+#define MSR_PPERF 0x0000064e
+#define MSR_PERF_LIMIT_REASONS 0x0000064f
+#define MSR_PM_ENABLE 0x00000770
+#define MSR_HWP_CAPABILITIES 0x00000771
+#define MSR_HWP_REQUEST_PKG 0x00000772
+#define MSR_HWP_INTERRUPT 0x00000773
+#define MSR_HWP_REQUEST 0x00000774
+#define MSR_HWP_STATUS 0x00000777
+
+/* CPUID.6.EAX */
+#define HWP_BASE_BIT (1<<7)
+#define HWP_NOTIFICATIONS_BIT (1<<8)
+#define HWP_ACTIVITY_WINDOW_BIT (1<<9)
+#define HWP_ENERGY_PERF_PREFERENCE_BIT (1<<10)
+#define HWP_PACKAGE_LEVEL_REQUEST_BIT (1<<11)
+
+/* IA32_HWP_CAPABILITIES */
+#define HWP_HIGHEST_PERF(x) (x & 0xff)
+#define HWP_GUARANTEED_PERF(x) ((x & (0xff << 8)) >>8)
+#define HWP_MOSTEFFICIENT_PERF(x) ((x & (0xff << 16)) >>16)
+#define HWP_LOWEST_PERF(x) ((x & (0xff << 24)) >>24)
+
+/* IA32_HWP_REQUEST */
+#define HWP_MIN_PERF(x) (x & 0xff)
+#define HWP_MAX_PERF(x) ((x & 0xff) << 8)
+#define HWP_DESIRED_PERF(x) ((x & 0xff) << 16)
+#define HWP_ENERGY_PERF_PREFERENCE(x) ((x & 0xff) << 24)
+#define HWP_ACTIVITY_WINDOW(x) ((x & 0xff3) << 32)
+#define HWP_PACKAGE_CONTROL(x) ((x & 0x1) << 42)
+
+/* IA32_HWP_STATUS */
+#define HWP_GUARANTEED_CHANGE(x) (x & 0x1)
+#define HWP_EXCURSION_TO_MINIMUM(x) (x & 0x4)
+
+/* IA32_HWP_INTERRUPT */
+#define HWP_CHANGE_TO_GUARANTEED_INT(x) (x & 0x1)
+#define HWP_EXCURSION_TO_MINIMUM_INT(x) (x & 0x2)
+
#define MSR_AMD64_MC0_MASK 0xc0010044
#define MSR_IA32_MCx_CTL(x) (MSR_IA32_MC0_CTL + 4*(x))
@@ -346,6 +385,8 @@
#define MSR_IA32_TEMPERATURE_TARGET 0x000001a2
+#define MSR_MISC_PWR_MGMT 0x000001aa
+
#define MSR_IA32_ENERGY_PERF_BIAS 0x000001b0
#define ENERGY_PERF_BIAS_PERFORMANCE 0
#define ENERGY_PERF_BIAS_NORMAL 6
diff --git a/arch/x86/kernel/apm_32.c b/arch/x86/kernel/apm_32.c
index 584874451414..927ec9235947 100644
--- a/arch/x86/kernel/apm_32.c
+++ b/arch/x86/kernel/apm_32.c
@@ -378,7 +378,6 @@ static struct cpuidle_driver apm_idle_driver = {
{ /* entry 1 is for APM idle */
.name = "APM",
.desc = "APM idle",
- .flags = CPUIDLE_FLAG_TIME_VALID,
.exit_latency = 250, /* WAG */
.target_residency = 500, /* WAG */
.enter = &apm_cpu_idle
diff --git a/arch/x86/kernel/cpu/scattered.c b/arch/x86/kernel/cpu/scattered.c
index 4a8013d55947..60639093d536 100644
--- a/arch/x86/kernel/cpu/scattered.c
+++ b/arch/x86/kernel/cpu/scattered.c
@@ -36,6 +36,11 @@ void init_scattered_cpuid_features(struct cpuinfo_x86 *c)
{ X86_FEATURE_ARAT, CR_EAX, 2, 0x00000006, 0 },
{ X86_FEATURE_PLN, CR_EAX, 4, 0x00000006, 0 },
{ X86_FEATURE_PTS, CR_EAX, 6, 0x00000006, 0 },
+ { X86_FEATURE_HWP, CR_EAX, 7, 0x00000006, 0 },
+ { X86_FEATURE_HWP_NOITFY, CR_EAX, 8, 0x00000006, 0 },
+ { X86_FEATURE_HWP_ACT_WINDOW, CR_EAX, 9, 0x00000006, 0 },
+ { X86_FEATURE_HWP_EPP, CR_EAX,10, 0x00000006, 0 },
+ { X86_FEATURE_HWP_PKG_REQ, CR_EAX,11, 0x00000006, 0 },
{ X86_FEATURE_APERFMPERF, CR_ECX, 0, 0x00000006, 0 },
{ X86_FEATURE_EPB, CR_ECX, 3, 0x00000006, 0 },
{ X86_FEATURE_HW_PSTATE, CR_EDX, 7, 0x80000007, 0 },
diff --git a/block/blk-core.c b/block/blk-core.c
index 2e7424b42947..ea1c4d0d7a44 100644
--- a/block/blk-core.c
+++ b/block/blk-core.c
@@ -1325,7 +1325,7 @@ void part_round_stats(int cpu, struct hd_struct *part)
}
EXPORT_SYMBOL_GPL(part_round_stats);
-#ifdef CONFIG_PM_RUNTIME
+#ifdef CONFIG_PM
static void blk_pm_put_request(struct request *rq)
{
if (rq->q->dev && !(rq->cmd_flags & REQ_PM) && !--rq->q->nr_pending)
@@ -2134,7 +2134,7 @@ void blk_account_io_done(struct request *req)
}
}
-#ifdef CONFIG_PM_RUNTIME
+#ifdef CONFIG_PM
/*
* Don't process normal requests when queue is suspended
* or in the process of suspending/resuming
@@ -3159,7 +3159,7 @@ void blk_finish_plug(struct blk_plug *plug)
}
EXPORT_SYMBOL(blk_finish_plug);
-#ifdef CONFIG_PM_RUNTIME
+#ifdef CONFIG_PM
/**
* blk_pm_runtime_init - Block layer runtime PM initialization routine
* @q: the queue of the device
diff --git a/block/elevator.c b/block/elevator.c
index afa3b037a17c..59794d0d38e3 100644
--- a/block/elevator.c
+++ b/block/elevator.c
@@ -539,7 +539,7 @@ void elv_bio_merged(struct request_queue *q, struct request *rq,
e->type->ops.elevator_bio_merged_fn(q, rq, bio);
}
-#ifdef CONFIG_PM_RUNTIME
+#ifdef CONFIG_PM
static void blk_pm_requeue_request(struct request *rq)
{
if (rq->q->dev && !(rq->cmd_flags & REQ_PM))
diff --git a/drivers/acpi/Kconfig b/drivers/acpi/Kconfig
index b23fe37f67c0..8951cefb0a96 100644
--- a/drivers/acpi/Kconfig
+++ b/drivers/acpi/Kconfig
@@ -360,15 +360,14 @@ config ACPI_BGRT
config ACPI_REDUCED_HARDWARE_ONLY
bool "Hardware-reduced ACPI support only" if EXPERT
def_bool n
- depends on ACPI
help
- This config item changes the way the ACPI code is built. When this
- option is selected, the kernel will use a specialized version of
- ACPICA that ONLY supports the ACPI "reduced hardware" mode. The
- resulting kernel will be smaller but it will also be restricted to
- running in ACPI reduced hardware mode ONLY.
+ This config item changes the way the ACPI code is built. When this
+ option is selected, the kernel will use a specialized version of
+ ACPICA that ONLY supports the ACPI "reduced hardware" mode. The
+ resulting kernel will be smaller but it will also be restricted to
+ running in ACPI reduced hardware mode ONLY.
- If you are unsure what to do, do not enable this option.
+ If you are unsure what to do, do not enable this option.
source "drivers/acpi/apei/Kconfig"
@@ -394,4 +393,27 @@ config ACPI_EXTLOG
driver adds support for that functionality with corresponding
tracepoint which carries that information to userspace.
+menuconfig PMIC_OPREGION
+ bool "PMIC (Power Management Integrated Circuit) operation region support"
+ help
+ Select this option to enable support for ACPI operation
+ region of the PMIC chip. The operation region can be used
+ to control power rails and sensor reading/writing on the
+ PMIC chip.
+
+if PMIC_OPREGION
+config CRC_PMIC_OPREGION
+ bool "ACPI operation region support for CrystalCove PMIC"
+ depends on INTEL_SOC_PMIC
+ help
+ This config adds ACPI operation region support for CrystalCove PMIC.
+
+config XPOWER_PMIC_OPREGION
+ bool "ACPI operation region support for XPower AXP288 PMIC"
+ depends on AXP288_ADC = y
+ help
+ This config adds ACPI operation region support for XPower AXP288 PMIC.
+
+endif
+
endif # ACPI
diff --git a/drivers/acpi/Makefile b/drivers/acpi/Makefile
index c3b2fcb729f3..f74317cc1ca9 100644
--- a/drivers/acpi/Makefile
+++ b/drivers/acpi/Makefile
@@ -47,6 +47,7 @@ acpi-y += int340x_thermal.o
acpi-y += power.o
acpi-y += event.o
acpi-y += sysfs.o
+acpi-y += property.o
acpi-$(CONFIG_X86) += acpi_cmos_rtc.o
acpi-$(CONFIG_DEBUG_FS) += debugfs.o
acpi-$(CONFIG_ACPI_NUMA) += numa.o
@@ -87,3 +88,7 @@ obj-$(CONFIG_ACPI_PROCESSOR_AGGREGATOR) += acpi_pad.o
obj-$(CONFIG_ACPI_APEI) += apei/
obj-$(CONFIG_ACPI_EXTLOG) += acpi_extlog.o
+
+obj-$(CONFIG_PMIC_OPREGION) += pmic/intel_pmic.o
+obj-$(CONFIG_CRC_PMIC_OPREGION) += pmic/intel_pmic_crc.o
+obj-$(CONFIG_XPOWER_PMIC_OPREGION) += pmic/intel_pmic_xpower.o
diff --git a/drivers/acpi/acpi_lpss.c b/drivers/acpi/acpi_lpss.c
index 93d160661f4c..4f3febf8a589 100644
--- a/drivers/acpi/acpi_lpss.c
+++ b/drivers/acpi/acpi_lpss.c
@@ -1,7 +1,7 @@
/*
* ACPI support for Intel Lynxpoint LPSS.
*
- * Copyright (C) 2013, Intel Corporation
+ * Copyright (C) 2013, 2014, Intel Corporation
* Authors: Mika Westerberg <mika.westerberg@linux.intel.com>
* Rafael J. Wysocki <rafael.j.wysocki@intel.com>
*
@@ -60,6 +60,8 @@ ACPI_MODULE_NAME("acpi_lpss");
#define LPSS_CLK_DIVIDER BIT(2)
#define LPSS_LTR BIT(3)
#define LPSS_SAVE_CTX BIT(4)
+#define LPSS_DEV_PROXY BIT(5)
+#define LPSS_PROXY_REQ BIT(6)
struct lpss_private_data;
@@ -70,8 +72,10 @@ struct lpss_device_desc {
void (*setup)(struct lpss_private_data *pdata);
};
+static struct device *proxy_device;
+
static struct lpss_device_desc lpss_dma_desc = {
- .flags = LPSS_CLK,
+ .flags = LPSS_CLK | LPSS_PROXY_REQ,
};
struct lpss_private_data {
@@ -146,22 +150,24 @@ static struct lpss_device_desc byt_pwm_dev_desc = {
};
static struct lpss_device_desc byt_uart_dev_desc = {
- .flags = LPSS_CLK | LPSS_CLK_GATE | LPSS_CLK_DIVIDER | LPSS_SAVE_CTX,
+ .flags = LPSS_CLK | LPSS_CLK_GATE | LPSS_CLK_DIVIDER | LPSS_SAVE_CTX |
+ LPSS_DEV_PROXY,
.prv_offset = 0x800,
.setup = lpss_uart_setup,
};
static struct lpss_device_desc byt_spi_dev_desc = {
- .flags = LPSS_CLK | LPSS_CLK_GATE | LPSS_CLK_DIVIDER | LPSS_SAVE_CTX,
+ .flags = LPSS_CLK | LPSS_CLK_GATE | LPSS_CLK_DIVIDER | LPSS_SAVE_CTX |
+ LPSS_DEV_PROXY,
.prv_offset = 0x400,
};
static struct lpss_device_desc byt_sdio_dev_desc = {
- .flags = LPSS_CLK,
+ .flags = LPSS_CLK | LPSS_DEV_PROXY,
};
static struct lpss_device_desc byt_i2c_dev_desc = {
- .flags = LPSS_CLK | LPSS_SAVE_CTX,
+ .flags = LPSS_CLK | LPSS_SAVE_CTX | LPSS_DEV_PROXY,
.prv_offset = 0x800,
.setup = byt_i2c_setup,
};
@@ -368,6 +374,8 @@ static int acpi_lpss_create_device(struct acpi_device *adev,
adev->driver_data = pdata;
pdev = acpi_create_platform_device(adev);
if (!IS_ERR_OR_NULL(pdev)) {
+ if (!proxy_device && dev_desc->flags & LPSS_DEV_PROXY)
+ proxy_device = &pdev->dev;
return 1;
}
@@ -499,14 +507,15 @@ static void acpi_lpss_set_ltr(struct device *dev, s32 val)
/**
* acpi_lpss_save_ctx() - Save the private registers of LPSS device
* @dev: LPSS device
+ * @pdata: pointer to the private data of the LPSS device
*
* Most LPSS devices have private registers which may loose their context when
* the device is powered down. acpi_lpss_save_ctx() saves those registers into
* prv_reg_ctx array.
*/
-static void acpi_lpss_save_ctx(struct device *dev)
+static void acpi_lpss_save_ctx(struct device *dev,
+ struct lpss_private_data *pdata)
{
- struct lpss_private_data *pdata = acpi_driver_data(ACPI_COMPANION(dev));
unsigned int i;
for (i = 0; i < LPSS_PRV_REG_COUNT; i++) {
@@ -521,12 +530,13 @@ static void acpi_lpss_save_ctx(struct device *dev)
/**
* acpi_lpss_restore_ctx() - Restore the private registers of LPSS device
* @dev: LPSS device
+ * @pdata: pointer to the private data of the LPSS device
*
* Restores the registers that were previously stored with acpi_lpss_save_ctx().
*/
-static void acpi_lpss_restore_ctx(struct device *dev)
+static void acpi_lpss_restore_ctx(struct device *dev,
+ struct lpss_private_data *pdata)
{
- struct lpss_private_data *pdata = acpi_driver_data(ACPI_COMPANION(dev));
unsigned int i;
/*
@@ -549,54 +559,82 @@ static void acpi_lpss_restore_ctx(struct device *dev)
#ifdef CONFIG_PM_SLEEP
static int acpi_lpss_suspend_late(struct device *dev)
{
- int ret = pm_generic_suspend_late(dev);
+ struct lpss_private_data *pdata = acpi_driver_data(ACPI_COMPANION(dev));
+ int ret;
+ ret = pm_generic_suspend_late(dev);
if (ret)
return ret;
- acpi_lpss_save_ctx(dev);
+ if (pdata->dev_desc->flags & LPSS_SAVE_CTX)
+ acpi_lpss_save_ctx(dev, pdata);
+
return acpi_dev_suspend_late(dev);
}
static int acpi_lpss_resume_early(struct device *dev)
{
- int ret = acpi_dev_resume_early(dev);
+ struct lpss_private_data *pdata = acpi_driver_data(ACPI_COMPANION(dev));
+ int ret;
+ ret = acpi_dev_resume_early(dev);
if (ret)
return ret;
- acpi_lpss_restore_ctx(dev);
+ if (pdata->dev_desc->flags & LPSS_SAVE_CTX)
+ acpi_lpss_restore_ctx(dev, pdata);
+
return pm_generic_resume_early(dev);
}
#endif /* CONFIG_PM_SLEEP */
-#ifdef CONFIG_PM_RUNTIME
static int acpi_lpss_runtime_suspend(struct device *dev)
{
- int ret = pm_generic_runtime_suspend(dev);
+ struct lpss_private_data *pdata = acpi_driver_data(ACPI_COMPANION(dev));
+ int ret;
+
+ ret = pm_generic_runtime_suspend(dev);
+ if (ret)
+ return ret;
+ if (pdata->dev_desc->flags & LPSS_SAVE_CTX)
+ acpi_lpss_save_ctx(dev, pdata);
+
+ ret = acpi_dev_runtime_suspend(dev);
if (ret)
return ret;
- acpi_lpss_save_ctx(dev);
- return acpi_dev_runtime_suspend(dev);
+ if (pdata->dev_desc->flags & LPSS_PROXY_REQ && proxy_device)
+ return pm_runtime_put_sync_suspend(proxy_device);
+
+ return 0;
}
static int acpi_lpss_runtime_resume(struct device *dev)
{
- int ret = acpi_dev_runtime_resume(dev);
+ struct lpss_private_data *pdata = acpi_driver_data(ACPI_COMPANION(dev));
+ int ret;
+
+ if (pdata->dev_desc->flags & LPSS_PROXY_REQ && proxy_device) {
+ ret = pm_runtime_get_sync(proxy_device);
+ if (ret)
+ return ret;
+ }
+ ret = acpi_dev_runtime_resume(dev);
if (ret)
return ret;
- acpi_lpss_restore_ctx(dev);
+ if (pdata->dev_desc->flags & LPSS_SAVE_CTX)
+ acpi_lpss_restore_ctx(dev, pdata);
+
return pm_generic_runtime_resume(dev);
}
-#endif /* CONFIG_PM_RUNTIME */
#endif /* CONFIG_PM */
static struct dev_pm_domain acpi_lpss_pm_domain = {
.ops = {
+#ifdef CONFIG_PM
#ifdef CONFIG_PM_SLEEP
.prepare = acpi_subsys_prepare,
.complete = acpi_subsys_complete,
@@ -608,7 +646,6 @@ static struct dev_pm_domain acpi_lpss_pm_domain = {
.poweroff_late = acpi_lpss_suspend_late,
.restore_early = acpi_lpss_resume_early,
#endif
-#ifdef CONFIG_PM_RUNTIME
.runtime_suspend = acpi_lpss_runtime_suspend,
.runtime_resume = acpi_lpss_runtime_resume,
#endif
@@ -631,30 +668,27 @@ static int acpi_lpss_platform_notify(struct notifier_block *nb,
return 0;
pdata = acpi_driver_data(adev);
- if (!pdata || !pdata->mmio_base)
+ if (!pdata)
return 0;
- if (pdata->mmio_size < pdata->dev_desc->prv_offset + LPSS_LTR_SIZE) {
+ if (pdata->mmio_base &&
+ pdata->mmio_size < pdata->dev_desc->prv_offset + LPSS_LTR_SIZE) {
dev_err(&pdev->dev, "MMIO size insufficient to access LTR\n");
return 0;
}
switch (action) {
- case BUS_NOTIFY_BOUND_DRIVER:
- if (pdata->dev_desc->flags & LPSS_SAVE_CTX)
- pdev->dev.pm_domain = &acpi_lpss_pm_domain;
- break;
- case BUS_NOTIFY_UNBOUND_DRIVER:
- if (pdata->dev_desc->flags & LPSS_SAVE_CTX)
- pdev->dev.pm_domain = NULL;
- break;
case BUS_NOTIFY_ADD_DEVICE:
+ pdev->dev.pm_domain = &acpi_lpss_pm_domain;
if (pdata->dev_desc->flags & LPSS_LTR)
return sysfs_create_group(&pdev->dev.kobj,
&lpss_attr_group);
+ break;
case BUS_NOTIFY_DEL_DEVICE:
if (pdata->dev_desc->flags & LPSS_LTR)
sysfs_remove_group(&pdev->dev.kobj, &lpss_attr_group);
+ pdev->dev.pm_domain = NULL;
+ break;
default:
break;
}
diff --git a/drivers/acpi/acpica/acglobal.h b/drivers/acpi/acpica/acglobal.h
index ebf02cc10a43..7f60582d0c8c 100644
--- a/drivers/acpi/acpica/acglobal.h
+++ b/drivers/acpi/acpica/acglobal.h
@@ -305,6 +305,7 @@ ACPI_INIT_GLOBAL(u8, acpi_gbl_db_output_flags, ACPI_DB_CONSOLE_OUTPUT);
ACPI_INIT_GLOBAL(u8, acpi_gbl_no_resource_disassembly, FALSE);
ACPI_INIT_GLOBAL(u8, acpi_gbl_ignore_noop_operator, FALSE);
+ACPI_INIT_GLOBAL(u8, acpi_gbl_cstyle_disassembly, TRUE);
ACPI_GLOBAL(u8, acpi_gbl_db_opt_disasm);
ACPI_GLOBAL(u8, acpi_gbl_db_opt_verbose);
diff --git a/drivers/acpi/acpica/aclocal.h b/drivers/acpi/acpica/aclocal.h
index c00e7e41ad75..680d23bbae7c 100644
--- a/drivers/acpi/acpica/aclocal.h
+++ b/drivers/acpi/acpica/aclocal.h
@@ -454,6 +454,7 @@ struct acpi_gpe_register_info {
u16 base_gpe_number; /* Base GPE number for this register */
u8 enable_for_wake; /* GPEs to keep enabled when sleeping */
u8 enable_for_run; /* GPEs to keep enabled when running */
+ u8 enable_mask; /* Current mask of enabled GPEs */
};
/*
@@ -722,6 +723,7 @@ union acpi_parse_value {
ACPI_DISASM_ONLY_MEMBERS (\
u8 disasm_flags; /* Used during AML disassembly */\
u8 disasm_opcode; /* Subtype used for disassembly */\
+ char *operator_symbol;/* Used for C-style operator name strings */\
char aml_op_name[16]) /* Op name (debug only) */
/* Flags for disasm_flags field above */
@@ -827,6 +829,8 @@ struct acpi_parse_state {
#define ACPI_PARSEOP_EMPTY_TERMLIST 0x04
#define ACPI_PARSEOP_PREDEF_CHECKED 0x08
#define ACPI_PARSEOP_SPECIAL 0x10
+#define ACPI_PARSEOP_COMPOUND 0x20
+#define ACPI_PARSEOP_ASSIGNMENT 0x40
/*****************************************************************************
*
diff --git a/drivers/acpi/acpica/evgpe.c b/drivers/acpi/acpica/evgpe.c
index 2095dfb72bcb..aa70154cf4fa 100644
--- a/drivers/acpi/acpica/evgpe.c
+++ b/drivers/acpi/acpica/evgpe.c
@@ -134,7 +134,7 @@ acpi_status acpi_ev_enable_gpe(struct acpi_gpe_event_info *gpe_event_info)
/* Enable the requested GPE */
- status = acpi_hw_low_set_gpe(gpe_event_info, ACPI_GPE_ENABLE);
+ status = acpi_hw_low_set_gpe(gpe_event_info, ACPI_GPE_ENABLE_SAVE);
return_ACPI_STATUS(status);
}
@@ -213,7 +213,7 @@ acpi_ev_remove_gpe_reference(struct acpi_gpe_event_info *gpe_event_info)
if (ACPI_SUCCESS(status)) {
status =
acpi_hw_low_set_gpe(gpe_event_info,
- ACPI_GPE_DISABLE);
+ ACPI_GPE_DISABLE_SAVE);
}
if (ACPI_FAILURE(status)) {
@@ -616,8 +616,11 @@ static void ACPI_SYSTEM_XFACE acpi_ev_asynch_execute_gpe_method(void *context)
static void ACPI_SYSTEM_XFACE acpi_ev_asynch_enable_gpe(void *context)
{
struct acpi_gpe_event_info *gpe_event_info = context;
+ acpi_cpu_flags flags;
+ flags = acpi_os_acquire_lock(acpi_gbl_gpe_lock);
(void)acpi_ev_finish_gpe(gpe_event_info);
+ acpi_os_release_lock(acpi_gbl_gpe_lock, flags);
ACPI_FREE(gpe_event_info);
return;
@@ -655,7 +658,7 @@ acpi_status acpi_ev_finish_gpe(struct acpi_gpe_event_info * gpe_event_info)
/*
* Enable this GPE, conditionally. This means that the GPE will
- * only be physically enabled if the enable_for_run bit is set
+ * only be physically enabled if the enable_mask bit is set
* in the event_info.
*/
(void)acpi_hw_low_set_gpe(gpe_event_info, ACPI_GPE_CONDITIONAL_ENABLE);
diff --git a/drivers/acpi/acpica/hwgpe.c b/drivers/acpi/acpica/hwgpe.c
index 48ac7b7b59cd..494027f5c067 100644
--- a/drivers/acpi/acpica/hwgpe.c
+++ b/drivers/acpi/acpica/hwgpe.c
@@ -115,12 +115,12 @@ acpi_hw_low_set_gpe(struct acpi_gpe_event_info *gpe_event_info, u32 action)
/* Set or clear just the bit that corresponds to this GPE */
register_bit = acpi_hw_get_gpe_register_bit(gpe_event_info);
- switch (action) {
+ switch (action & ~ACPI_GPE_SAVE_MASK) {
case ACPI_GPE_CONDITIONAL_ENABLE:
- /* Only enable if the enable_for_run bit is set */
+ /* Only enable if the corresponding enable_mask bit is set */
- if (!(register_bit & gpe_register_info->enable_for_run)) {
+ if (!(register_bit & gpe_register_info->enable_mask)) {
return (AE_BAD_PARAMETER);
}
@@ -145,6 +145,9 @@ acpi_hw_low_set_gpe(struct acpi_gpe_event_info *gpe_event_info, u32 action)
/* Write the updated enable mask */
status = acpi_hw_write(enable_mask, &gpe_register_info->enable_address);
+ if (ACPI_SUCCESS(status) && (action & ACPI_GPE_SAVE_MASK)) {
+ gpe_register_info->enable_mask = enable_mask;
+ }
return (status);
}
@@ -262,6 +265,32 @@ acpi_hw_get_gpe_status(struct acpi_gpe_event_info * gpe_event_info,
/******************************************************************************
*
+ * FUNCTION: acpi_hw_gpe_enable_write
+ *
+ * PARAMETERS: enable_mask - Bit mask to write to the GPE register
+ * gpe_register_info - Gpe Register info
+ *
+ * RETURN: Status
+ *
+ * DESCRIPTION: Write the enable mask byte to the given GPE register.
+ *
+ ******************************************************************************/
+
+static acpi_status
+acpi_hw_gpe_enable_write(u8 enable_mask,
+ struct acpi_gpe_register_info *gpe_register_info)
+{
+ acpi_status status;
+
+ status = acpi_hw_write(enable_mask, &gpe_register_info->enable_address);
+ if (ACPI_SUCCESS(status)) {
+ gpe_register_info->enable_mask = enable_mask;
+ }
+ return (status);
+}
+
+/******************************************************************************
+ *
* FUNCTION: acpi_hw_disable_gpe_block
*
* PARAMETERS: gpe_xrupt_info - GPE Interrupt info
@@ -287,8 +316,8 @@ acpi_hw_disable_gpe_block(struct acpi_gpe_xrupt_info *gpe_xrupt_info,
/* Disable all GPEs in this register */
status =
- acpi_hw_write(0x00,
- &gpe_block->register_info[i].enable_address);
+ acpi_hw_gpe_enable_write(0x00,
+ &gpe_block->register_info[i]);
if (ACPI_FAILURE(status)) {
return (status);
}
@@ -355,21 +384,23 @@ acpi_hw_enable_runtime_gpe_block(struct acpi_gpe_xrupt_info *gpe_xrupt_info,
{
u32 i;
acpi_status status;
+ struct acpi_gpe_register_info *gpe_register_info;
/* NOTE: assumes that all GPEs are currently disabled */
/* Examine each GPE Register within the block */
for (i = 0; i < gpe_block->register_count; i++) {
- if (!gpe_block->register_info[i].enable_for_run) {
+ gpe_register_info = &gpe_block->register_info[i];
+ if (!gpe_register_info->enable_for_run) {
continue;
}
/* Enable all "runtime" GPEs in this register */
status =
- acpi_hw_write(gpe_block->register_info[i].enable_for_run,
- &gpe_block->register_info[i].enable_address);
+ acpi_hw_gpe_enable_write(gpe_register_info->enable_for_run,
+ gpe_register_info);
if (ACPI_FAILURE(status)) {
return (status);
}
@@ -399,10 +430,12 @@ acpi_hw_enable_wakeup_gpe_block(struct acpi_gpe_xrupt_info *gpe_xrupt_info,
{
u32 i;
acpi_status status;
+ struct acpi_gpe_register_info *gpe_register_info;
/* Examine each GPE Register within the block */
for (i = 0; i < gpe_block->register_count; i++) {
+ gpe_register_info = &gpe_block->register_info[i];
/*
* Enable all "wake" GPEs in this register and disable the
@@ -410,8 +443,8 @@ acpi_hw_enable_wakeup_gpe_block(struct acpi_gpe_xrupt_info *gpe_xrupt_info,
*/
status =
- acpi_hw_write(gpe_block->register_info[i].enable_for_wake,
- &gpe_block->register_info[i].enable_address);
+ acpi_hw_gpe_enable_write(gpe_register_info->enable_for_wake,
+ gpe_register_info);
if (ACPI_FAILURE(status)) {
return (status);
}
diff --git a/drivers/acpi/acpica/utresrc.c b/drivers/acpi/acpica/utresrc.c
index 5cd017c7ac0e..bc1ff820c7dd 100644
--- a/drivers/acpi/acpica/utresrc.c
+++ b/drivers/acpi/acpica/utresrc.c
@@ -263,7 +263,7 @@ const char *acpi_gbl_bpb_decode[] = {
/* UART serial bus stop bits */
const char *acpi_gbl_sb_decode[] = {
- "StopBitsNone",
+ "StopBitsZero",
"StopBitsOne",
"StopBitsOnePlusHalf",
"StopBitsTwo"
diff --git a/drivers/acpi/acpica/utxface.c b/drivers/acpi/acpica/utxface.c
index 502a8492dc83..49c873c68756 100644
--- a/drivers/acpi/acpica/utxface.c
+++ b/drivers/acpi/acpica/utxface.c
@@ -531,7 +531,9 @@ acpi_decode_pld_buffer(u8 *in_buffer,
ACPI_MOVE_32_TO_32(&dword, &buffer[0]);
pld_info->revision = ACPI_PLD_GET_REVISION(&dword);
pld_info->ignore_color = ACPI_PLD_GET_IGNORE_COLOR(&dword);
- pld_info->color = ACPI_PLD_GET_COLOR(&dword);
+ pld_info->red = ACPI_PLD_GET_RED(&dword);
+ pld_info->green = ACPI_PLD_GET_GREEN(&dword);
+ pld_info->blue = ACPI_PLD_GET_BLUE(&dword);
/* Second 32-bit DWord */
diff --git a/drivers/acpi/acpica/utxfinit.c b/drivers/acpi/acpica/utxfinit.c
index 13380d818462..b1fd6886e439 100644
--- a/drivers/acpi/acpica/utxfinit.c
+++ b/drivers/acpi/acpica/utxfinit.c
@@ -53,6 +53,9 @@
#define _COMPONENT ACPI_UTILITIES
ACPI_MODULE_NAME("utxfinit")
+/* For acpi_exec only */
+void ae_do_object_overrides(void);
+
/*******************************************************************************
*
* FUNCTION: acpi_initialize_subsystem
@@ -65,6 +68,7 @@ ACPI_MODULE_NAME("utxfinit")
* called, so any early initialization belongs here.
*
******************************************************************************/
+
acpi_status __init acpi_initialize_subsystem(void)
{
acpi_status status;
@@ -275,6 +279,13 @@ acpi_status __init acpi_initialize_objects(u32 flags)
return_ACPI_STATUS(status);
}
}
+#ifdef ACPI_EXEC_APP
+ /*
+ * This call implements the "initialization file" option for acpi_exec.
+ * This is the precise point that we want to perform the overrides.
+ */
+ ae_do_object_overrides();
+#endif
/*
* Execute any module-level code that was detected during the table load
diff --git a/drivers/acpi/battery.c b/drivers/acpi/battery.c
index 8ec8a89a20ab..d98ba4355819 100644
--- a/drivers/acpi/battery.c
+++ b/drivers/acpi/battery.c
@@ -1180,6 +1180,10 @@ static int acpi_battery_add(struct acpi_device *device)
if (!device)
return -EINVAL;
+
+ if (device->dep_unmet)
+ return -EPROBE_DEFER;
+
battery = kzalloc(sizeof(struct acpi_battery), GFP_KERNEL);
if (!battery)
return -ENOMEM;
diff --git a/drivers/acpi/device_pm.c b/drivers/acpi/device_pm.c
index 7db193160766..897640188acd 100644
--- a/drivers/acpi/device_pm.c
+++ b/drivers/acpi/device_pm.c
@@ -201,7 +201,7 @@ int acpi_device_set_power(struct acpi_device *device, int state)
* Transition Power
* ----------------
* In accordance with the ACPI specification first apply power (via
- * power resources) and then evalute _PSx.
+ * power resources) and then evaluate _PSx.
*/
if (device->power.flags.power_resources) {
result = acpi_power_transition(device, state);
@@ -692,7 +692,6 @@ static int acpi_device_wakeup(struct acpi_device *adev, u32 target_state,
return 0;
}
-#ifdef CONFIG_PM_RUNTIME
/**
* acpi_pm_device_run_wake - Enable/disable remote wakeup for given device.
* @dev: Device to enable/disable the platform to wake up.
@@ -714,7 +713,6 @@ int acpi_pm_device_run_wake(struct device *phys_dev, bool enable)
return acpi_device_wakeup(adev, ACPI_STATE_S0, enable);
}
EXPORT_SYMBOL(acpi_pm_device_run_wake);
-#endif /* CONFIG_PM_RUNTIME */
#ifdef CONFIG_PM_SLEEP
/**
@@ -773,7 +771,6 @@ static int acpi_dev_pm_full_power(struct acpi_device *adev)
acpi_device_set_power(adev, ACPI_STATE_D0) : 0;
}
-#ifdef CONFIG_PM_RUNTIME
/**
* acpi_dev_runtime_suspend - Put device into a low-power state using ACPI.
* @dev: Device to put into a low-power state.
@@ -855,7 +852,6 @@ int acpi_subsys_runtime_resume(struct device *dev)
return ret ? ret : pm_generic_runtime_resume(dev);
}
EXPORT_SYMBOL_GPL(acpi_subsys_runtime_resume);
-#endif /* CONFIG_PM_RUNTIME */
#ifdef CONFIG_PM_SLEEP
/**
@@ -1023,10 +1019,9 @@ EXPORT_SYMBOL_GPL(acpi_subsys_freeze);
static struct dev_pm_domain acpi_general_pm_domain = {
.ops = {
-#ifdef CONFIG_PM_RUNTIME
+#ifdef CONFIG_PM
.runtime_suspend = acpi_subsys_runtime_suspend,
.runtime_resume = acpi_subsys_runtime_resume,
-#endif
#ifdef CONFIG_PM_SLEEP
.prepare = acpi_subsys_prepare,
.complete = acpi_subsys_complete,
@@ -1038,6 +1033,7 @@ static struct dev_pm_domain acpi_general_pm_domain = {
.poweroff_late = acpi_subsys_suspend_late,
.restore_early = acpi_subsys_resume_early,
#endif
+#endif
},
};
diff --git a/drivers/acpi/internal.h b/drivers/acpi/internal.h
index 447f6d679b29..163e82f536fa 100644
--- a/drivers/acpi/internal.h
+++ b/drivers/acpi/internal.h
@@ -173,4 +173,10 @@ static inline void suspend_nvs_restore(void) {}
bool acpi_osi_is_win8(void);
#endif
+/*--------------------------------------------------------------------------
+ Device properties
+ -------------------------------------------------------------------------- */
+void acpi_init_properties(struct acpi_device *adev);
+void acpi_free_properties(struct acpi_device *adev);
+
#endif /* _ACPI_INTERNAL_H_ */
diff --git a/drivers/acpi/osl.c b/drivers/acpi/osl.c
index 9964f70be98d..f9eeae871593 100644
--- a/drivers/acpi/osl.c
+++ b/drivers/acpi/osl.c
@@ -436,7 +436,7 @@ static void acpi_os_drop_map_ref(struct acpi_ioremap *map)
static void acpi_os_map_cleanup(struct acpi_ioremap *map)
{
if (!map->refcount) {
- synchronize_rcu();
+ synchronize_rcu_expedited();
acpi_unmap(map->phys, map->virt);
kfree(map);
}
@@ -1188,6 +1188,12 @@ EXPORT_SYMBOL(acpi_os_execute);
void acpi_os_wait_events_complete(void)
{
+ /*
+ * Make sure the GPE handler or the fixed event handler is not used
+ * on another CPU after removal.
+ */
+ if (acpi_irq_handler)
+ synchronize_hardirq(acpi_gbl_FADT.sci_interrupt);
flush_workqueue(kacpid_wq);
flush_workqueue(kacpi_notify_wq);
}
diff --git a/drivers/acpi/pci_irq.c b/drivers/acpi/pci_irq.c
index 6e6b80eb0bba..7cc4e33179f9 100644
--- a/drivers/acpi/pci_irq.c
+++ b/drivers/acpi/pci_irq.c
@@ -484,7 +484,7 @@ void acpi_pci_irq_disable(struct pci_dev *dev)
/* Keep IOAPIC pin configuration when suspending */
if (dev->dev.power.is_prepared)
return;
-#ifdef CONFIG_PM_RUNTIME
+#ifdef CONFIG_PM
if (dev->dev.power.runtime_status == RPM_SUSPENDING)
return;
#endif
diff --git a/drivers/acpi/pmic/intel_pmic.c b/drivers/acpi/pmic/intel_pmic.c
new file mode 100644
index 000000000000..a732e5d7e322
--- /dev/null
+++ b/drivers/acpi/pmic/intel_pmic.c
@@ -0,0 +1,354 @@
+/*
+ * intel_pmic.c - Intel PMIC operation region driver
+ *
+ * Copyright (C) 2014 Intel Corporation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License version
+ * 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/module.h>
+#include <linux/acpi.h>
+#include <linux/regmap.h>
+#include "intel_pmic.h"
+
+#define PMIC_POWER_OPREGION_ID 0x8d
+#define PMIC_THERMAL_OPREGION_ID 0x8c
+
+struct acpi_lpat {
+ int temp;
+ int raw;
+};
+
+struct intel_pmic_opregion {
+ struct mutex lock;
+ struct acpi_lpat *lpat;
+ int lpat_count;
+ struct regmap *regmap;
+ struct intel_pmic_opregion_data *data;
+};
+
+static int pmic_get_reg_bit(int address, struct pmic_table *table,
+ int count, int *reg, int *bit)
+{
+ int i;
+
+ for (i = 0; i < count; i++) {
+ if (table[i].address == address) {
+ *reg = table[i].reg;
+ if (bit)
+ *bit = table[i].bit;
+ return 0;
+ }
+ }
+ return -ENOENT;
+}
+
+/**
+ * raw_to_temp(): Return temperature from raw value through LPAT table
+ *
+ * @lpat: the temperature_raw mapping table
+ * @count: the count of the above mapping table
+ * @raw: the raw value, used as a key to get the temerature from the
+ * above mapping table
+ *
+ * A positive value will be returned on success, a negative errno will
+ * be returned in error cases.
+ */
+static int raw_to_temp(struct acpi_lpat *lpat, int count, int raw)
+{
+ int i, delta_temp, delta_raw, temp;
+
+ for (i = 0; i < count - 1; i++) {
+ if ((raw >= lpat[i].raw && raw <= lpat[i+1].raw) ||
+ (raw <= lpat[i].raw && raw >= lpat[i+1].raw))
+ break;
+ }
+
+ if (i == count - 1)
+ return -ENOENT;
+
+ delta_temp = lpat[i+1].temp - lpat[i].temp;
+ delta_raw = lpat[i+1].raw - lpat[i].raw;
+ temp = lpat[i].temp + (raw - lpat[i].raw) * delta_temp / delta_raw;
+
+ return temp;
+}
+
+/**
+ * temp_to_raw(): Return raw value from temperature through LPAT table
+ *
+ * @lpat: the temperature_raw mapping table
+ * @count: the count of the above mapping table
+ * @temp: the temperature, used as a key to get the raw value from the
+ * above mapping table
+ *
+ * A positive value will be returned on success, a negative errno will
+ * be returned in error cases.
+ */
+static int temp_to_raw(struct acpi_lpat *lpat, int count, int temp)
+{
+ int i, delta_temp, delta_raw, raw;
+
+ for (i = 0; i < count - 1; i++) {
+ if (temp >= lpat[i].temp && temp <= lpat[i+1].temp)
+ break;
+ }
+
+ if (i == count - 1)
+ return -ENOENT;
+
+ delta_temp = lpat[i+1].temp - lpat[i].temp;
+ delta_raw = lpat[i+1].raw - lpat[i].raw;
+ raw = lpat[i].raw + (temp - lpat[i].temp) * delta_raw / delta_temp;
+
+ return raw;
+}
+
+static void pmic_thermal_lpat(struct intel_pmic_opregion *opregion,
+ acpi_handle handle, struct device *dev)
+{
+ struct acpi_buffer buffer = { ACPI_ALLOCATE_BUFFER, NULL };
+ union acpi_object *obj_p, *obj_e;
+ int *lpat, i;
+ acpi_status status;
+
+ status = acpi_evaluate_object(handle, "LPAT", NULL, &buffer);
+ if (ACPI_FAILURE(status))
+ return;
+
+ obj_p = (union acpi_object *)buffer.pointer;
+ if (!obj_p || (obj_p->type != ACPI_TYPE_PACKAGE) ||
+ (obj_p->package.count % 2) || (obj_p->package.count < 4))
+ goto out;
+
+ lpat = devm_kmalloc(dev, sizeof(int) * obj_p->package.count,
+ GFP_KERNEL);
+ if (!lpat)
+ goto out;
+
+ for (i = 0; i < obj_p->package.count; i++) {
+ obj_e = &obj_p->package.elements[i];
+ if (obj_e->type != ACPI_TYPE_INTEGER) {
+ devm_kfree(dev, lpat);
+ goto out;
+ }
+ lpat[i] = (s64)obj_e->integer.value;
+ }
+
+ opregion->lpat = (struct acpi_lpat *)lpat;
+ opregion->lpat_count = obj_p->package.count / 2;
+
+out:
+ kfree(buffer.pointer);
+}
+
+static acpi_status intel_pmic_power_handler(u32 function,
+ acpi_physical_address address, u32 bits, u64 *value64,
+ void *handler_context, void *region_context)
+{
+ struct intel_pmic_opregion *opregion = region_context;
+ struct regmap *regmap = opregion->regmap;
+ struct intel_pmic_opregion_data *d = opregion->data;
+ int reg, bit, result;
+
+ if (bits != 32 || !value64)
+ return AE_BAD_PARAMETER;
+
+ if (function == ACPI_WRITE && !(*value64 == 0 || *value64 == 1))
+ return AE_BAD_PARAMETER;
+
+ result = pmic_get_reg_bit(address, d->power_table,
+ d->power_table_count, &reg, &bit);
+ if (result == -ENOENT)
+ return AE_BAD_PARAMETER;
+
+ mutex_lock(&opregion->lock);
+
+ result = function == ACPI_READ ?
+ d->get_power(regmap, reg, bit, value64) :
+ d->update_power(regmap, reg, bit, *value64 == 1);
+
+ mutex_unlock(&opregion->lock);
+
+ return result ? AE_ERROR : AE_OK;
+}
+
+static int pmic_read_temp(struct intel_pmic_opregion *opregion,
+ int reg, u64 *value)
+{
+ int raw_temp, temp;
+
+ if (!opregion->data->get_raw_temp)
+ return -ENXIO;
+
+ raw_temp = opregion->data->get_raw_temp(opregion->regmap, reg);
+ if (raw_temp < 0)
+ return raw_temp;
+
+ if (!opregion->lpat) {
+ *value = raw_temp;
+ return 0;
+ }
+
+ temp = raw_to_temp(opregion->lpat, opregion->lpat_count, raw_temp);
+ if (temp < 0)
+ return temp;
+
+ *value = temp;
+ return 0;
+}
+
+static int pmic_thermal_temp(struct intel_pmic_opregion *opregion, int reg,
+ u32 function, u64 *value)
+{
+ return function == ACPI_READ ?
+ pmic_read_temp(opregion, reg, value) : -EINVAL;
+}
+
+static int pmic_thermal_aux(struct intel_pmic_opregion *opregion, int reg,
+ u32 function, u64 *value)
+{
+ int raw_temp;
+
+ if (function == ACPI_READ)
+ return pmic_read_temp(opregion, reg, value);
+
+ if (!opregion->data->update_aux)
+ return -ENXIO;
+
+ if (opregion->lpat) {
+ raw_temp = temp_to_raw(opregion->lpat, opregion->lpat_count,
+ *value);
+ if (raw_temp < 0)
+ return raw_temp;
+ } else {
+ raw_temp = *value;
+ }
+
+ return opregion->data->update_aux(opregion->regmap, reg, raw_temp);
+}
+
+static int pmic_thermal_pen(struct intel_pmic_opregion *opregion, int reg,
+ u32 function, u64 *value)
+{
+ struct intel_pmic_opregion_data *d = opregion->data;
+ struct regmap *regmap = opregion->regmap;
+
+ if (!d->get_policy || !d->update_policy)
+ return -ENXIO;
+
+ if (function == ACPI_READ)
+ return d->get_policy(regmap, reg, value);
+
+ if (*value != 0 && *value != 1)
+ return -EINVAL;
+
+ return d->update_policy(regmap, reg, *value);
+}
+
+static bool pmic_thermal_is_temp(int address)
+{
+ return (address <= 0x3c) && !(address % 12);
+}
+
+static bool pmic_thermal_is_aux(int address)
+{
+ return (address >= 4 && address <= 0x40 && !((address - 4) % 12)) ||
+ (address >= 8 && address <= 0x44 && !((address - 8) % 12));
+}
+
+static bool pmic_thermal_is_pen(int address)
+{
+ return address >= 0x48 && address <= 0x5c;
+}
+
+static acpi_status intel_pmic_thermal_handler(u32 function,
+ acpi_physical_address address, u32 bits, u64 *value64,
+ void *handler_context, void *region_context)
+{
+ struct intel_pmic_opregion *opregion = region_context;
+ struct intel_pmic_opregion_data *d = opregion->data;
+ int reg, result;
+
+ if (bits != 32 || !value64)
+ return AE_BAD_PARAMETER;
+
+ result = pmic_get_reg_bit(address, d->thermal_table,
+ d->thermal_table_count, &reg, NULL);
+ if (result == -ENOENT)
+ return AE_BAD_PARAMETER;
+
+ mutex_lock(&opregion->lock);
+
+ if (pmic_thermal_is_temp(address))
+ result = pmic_thermal_temp(opregion, reg, function, value64);
+ else if (pmic_thermal_is_aux(address))
+ result = pmic_thermal_aux(opregion, reg, function, value64);
+ else if (pmic_thermal_is_pen(address))
+ result = pmic_thermal_pen(opregion, reg, function, value64);
+ else
+ result = -EINVAL;
+
+ mutex_unlock(&opregion->lock);
+
+ if (result < 0) {
+ if (result == -EINVAL)
+ return AE_BAD_PARAMETER;
+ else
+ return AE_ERROR;
+ }
+
+ return AE_OK;
+}
+
+int intel_pmic_install_opregion_handler(struct device *dev, acpi_handle handle,
+ struct regmap *regmap,
+ struct intel_pmic_opregion_data *d)
+{
+ acpi_status status;
+ struct intel_pmic_opregion *opregion;
+
+ if (!dev || !regmap || !d)
+ return -EINVAL;
+
+ if (!handle)
+ return -ENODEV;
+
+ opregion = devm_kzalloc(dev, sizeof(*opregion), GFP_KERNEL);
+ if (!opregion)
+ return -ENOMEM;
+
+ mutex_init(&opregion->lock);
+ opregion->regmap = regmap;
+ pmic_thermal_lpat(opregion, handle, dev);
+
+ status = acpi_install_address_space_handler(handle,
+ PMIC_POWER_OPREGION_ID,
+ intel_pmic_power_handler,
+ NULL, opregion);
+ if (ACPI_FAILURE(status))
+ return -ENODEV;
+
+ status = acpi_install_address_space_handler(handle,
+ PMIC_THERMAL_OPREGION_ID,
+ intel_pmic_thermal_handler,
+ NULL, opregion);
+ if (ACPI_FAILURE(status)) {
+ acpi_remove_address_space_handler(handle, PMIC_POWER_OPREGION_ID,
+ intel_pmic_power_handler);
+ return -ENODEV;
+ }
+
+ opregion->data = d;
+ return 0;
+}
+EXPORT_SYMBOL_GPL(intel_pmic_install_opregion_handler);
+
+MODULE_LICENSE("GPL");
diff --git a/drivers/acpi/pmic/intel_pmic.h b/drivers/acpi/pmic/intel_pmic.h
new file mode 100644
index 000000000000..d4e90af8f0dd
--- /dev/null
+++ b/drivers/acpi/pmic/intel_pmic.h
@@ -0,0 +1,25 @@
+#ifndef __INTEL_PMIC_H
+#define __INTEL_PMIC_H
+
+struct pmic_table {
+ int address; /* operation region address */
+ int reg; /* corresponding thermal register */
+ int bit; /* control bit for power */
+};
+
+struct intel_pmic_opregion_data {
+ int (*get_power)(struct regmap *r, int reg, int bit, u64 *value);
+ int (*update_power)(struct regmap *r, int reg, int bit, bool on);
+ int (*get_raw_temp)(struct regmap *r, int reg);
+ int (*update_aux)(struct regmap *r, int reg, int raw_temp);
+ int (*get_policy)(struct regmap *r, int reg, u64 *value);
+ int (*update_policy)(struct regmap *r, int reg, int enable);
+ struct pmic_table *power_table;
+ int power_table_count;
+ struct pmic_table *thermal_table;
+ int thermal_table_count;
+};
+
+int intel_pmic_install_opregion_handler(struct device *dev, acpi_handle handle, struct regmap *regmap, struct intel_pmic_opregion_data *d);
+
+#endif
diff --git a/drivers/acpi/pmic/intel_pmic_crc.c b/drivers/acpi/pmic/intel_pmic_crc.c
new file mode 100644
index 000000000000..ef7d8ff95abe
--- /dev/null
+++ b/drivers/acpi/pmic/intel_pmic_crc.c
@@ -0,0 +1,211 @@
+/*
+ * intel_pmic_crc.c - Intel CrystalCove PMIC operation region driver
+ *
+ * Copyright (C) 2014 Intel Corporation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License version
+ * 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/module.h>
+#include <linux/acpi.h>
+#include <linux/mfd/intel_soc_pmic.h>
+#include <linux/regmap.h>
+#include <linux/platform_device.h>
+#include "intel_pmic.h"
+
+#define PWR_SOURCE_SELECT BIT(1)
+
+#define PMIC_A0LOCK_REG 0xc5
+
+static struct pmic_table power_table[] = {
+ {
+ .address = 0x24,
+ .reg = 0x66,
+ .bit = 0x00,
+ },
+ {
+ .address = 0x48,
+ .reg = 0x5d,
+ .bit = 0x00,
+ },
+};
+
+static struct pmic_table thermal_table[] = {
+ {
+ .address = 0x00,
+ .reg = 0x75
+ },
+ {
+ .address = 0x04,
+ .reg = 0x95
+ },
+ {
+ .address = 0x08,
+ .reg = 0x97
+ },
+ {
+ .address = 0x0c,
+ .reg = 0x77
+ },
+ {
+ .address = 0x10,
+ .reg = 0x9a
+ },
+ {
+ .address = 0x14,
+ .reg = 0x9c
+ },
+ {
+ .address = 0x18,
+ .reg = 0x79
+ },
+ {
+ .address = 0x1c,
+ .reg = 0x9f
+ },
+ {
+ .address = 0x20,
+ .reg = 0xa1
+ },
+ {
+ .address = 0x48,
+ .reg = 0x94
+ },
+ {
+ .address = 0x4c,
+ .reg = 0x99
+ },
+ {
+ .address = 0x50,
+ .reg = 0x9e
+ },
+};
+
+static int intel_crc_pmic_get_power(struct regmap *regmap, int reg,
+ int bit, u64 *value)
+{
+ int data;
+
+ if (regmap_read(regmap, reg, &data))
+ return -EIO;
+
+ *value = (data & PWR_SOURCE_SELECT) && (data & BIT(bit)) ? 1 : 0;
+ return 0;
+}
+
+static int intel_crc_pmic_update_power(struct regmap *regmap, int reg,
+ int bit, bool on)
+{
+ int data;
+
+ if (regmap_read(regmap, reg, &data))
+ return -EIO;
+
+ if (on) {
+ data |= PWR_SOURCE_SELECT | BIT(bit);
+ } else {
+ data &= ~BIT(bit);
+ data |= PWR_SOURCE_SELECT;
+ }
+
+ if (regmap_write(regmap, reg, data))
+ return -EIO;
+ return 0;
+}
+
+static int intel_crc_pmic_get_raw_temp(struct regmap *regmap, int reg)
+{
+ int temp_l, temp_h;
+
+ /*
+ * Raw temperature value is 10bits: 8bits in reg
+ * and 2bits in reg-1: bit0,1
+ */
+ if (regmap_read(regmap, reg, &temp_l) ||
+ regmap_read(regmap, reg - 1, &temp_h))
+ return -EIO;
+
+ return temp_l | (temp_h & 0x3) << 8;
+}
+
+static int intel_crc_pmic_update_aux(struct regmap *regmap, int reg, int raw)
+{
+ return regmap_write(regmap, reg, raw) ||
+ regmap_update_bits(regmap, reg - 1, 0x3, raw >> 8) ? -EIO : 0;
+}
+
+static int intel_crc_pmic_get_policy(struct regmap *regmap, int reg, u64 *value)
+{
+ int pen;
+
+ if (regmap_read(regmap, reg, &pen))
+ return -EIO;
+ *value = pen >> 7;
+ return 0;
+}
+
+static int intel_crc_pmic_update_policy(struct regmap *regmap,
+ int reg, int enable)
+{
+ int alert0;
+
+ /* Update to policy enable bit requires unlocking a0lock */
+ if (regmap_read(regmap, PMIC_A0LOCK_REG, &alert0))
+ return -EIO;
+
+ if (regmap_update_bits(regmap, PMIC_A0LOCK_REG, 0x01, 0))
+ return -EIO;
+
+ if (regmap_update_bits(regmap, reg, 0x80, enable << 7))
+ return -EIO;
+
+ /* restore alert0 */
+ if (regmap_write(regmap, PMIC_A0LOCK_REG, alert0))
+ return -EIO;
+
+ return 0;
+}
+
+static struct intel_pmic_opregion_data intel_crc_pmic_opregion_data = {
+ .get_power = intel_crc_pmic_get_power,
+ .update_power = intel_crc_pmic_update_power,
+ .get_raw_temp = intel_crc_pmic_get_raw_temp,
+ .update_aux = intel_crc_pmic_update_aux,
+ .get_policy = intel_crc_pmic_get_policy,
+ .update_policy = intel_crc_pmic_update_policy,
+ .power_table = power_table,
+ .power_table_count= ARRAY_SIZE(power_table),
+ .thermal_table = thermal_table,
+ .thermal_table_count = ARRAY_SIZE(thermal_table),
+};
+
+static int intel_crc_pmic_opregion_probe(struct platform_device *pdev)
+{
+ struct intel_soc_pmic *pmic = dev_get_drvdata(pdev->dev.parent);
+ return intel_pmic_install_opregion_handler(&pdev->dev,
+ ACPI_HANDLE(pdev->dev.parent), pmic->regmap,
+ &intel_crc_pmic_opregion_data);
+}
+
+static struct platform_driver intel_crc_pmic_opregion_driver = {
+ .probe = intel_crc_pmic_opregion_probe,
+ .driver = {
+ .name = "crystal_cove_pmic",
+ },
+};
+
+static int __init intel_crc_pmic_opregion_driver_init(void)
+{
+ return platform_driver_register(&intel_crc_pmic_opregion_driver);
+}
+module_init(intel_crc_pmic_opregion_driver_init);
+
+MODULE_DESCRIPTION("CrystalCove ACPI opration region driver");
+MODULE_LICENSE("GPL");
diff --git a/drivers/acpi/pmic/intel_pmic_xpower.c b/drivers/acpi/pmic/intel_pmic_xpower.c
new file mode 100644
index 000000000000..6a082d4de12c
--- /dev/null
+++ b/drivers/acpi/pmic/intel_pmic_xpower.c
@@ -0,0 +1,268 @@
+/*
+ * intel_pmic_xpower.c - XPower AXP288 PMIC operation region driver
+ *
+ * Copyright (C) 2014 Intel Corporation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License version
+ * 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/module.h>
+#include <linux/acpi.h>
+#include <linux/mfd/axp20x.h>
+#include <linux/regmap.h>
+#include <linux/platform_device.h>
+#include <linux/iio/consumer.h>
+#include "intel_pmic.h"
+
+#define XPOWER_GPADC_LOW 0x5b
+
+static struct pmic_table power_table[] = {
+ {
+ .address = 0x00,
+ .reg = 0x13,
+ .bit = 0x05,
+ },
+ {
+ .address = 0x04,
+ .reg = 0x13,
+ .bit = 0x06,
+ },
+ {
+ .address = 0x08,
+ .reg = 0x13,
+ .bit = 0x07,
+ },
+ {
+ .address = 0x0c,
+ .reg = 0x12,
+ .bit = 0x03,
+ },
+ {
+ .address = 0x10,
+ .reg = 0x12,
+ .bit = 0x04,
+ },
+ {
+ .address = 0x14,
+ .reg = 0x12,
+ .bit = 0x05,
+ },
+ {
+ .address = 0x18,
+ .reg = 0x12,
+ .bit = 0x06,
+ },
+ {
+ .address = 0x1c,
+ .reg = 0x12,
+ .bit = 0x00,
+ },
+ {
+ .address = 0x20,
+ .reg = 0x12,
+ .bit = 0x01,
+ },
+ {
+ .address = 0x24,
+ .reg = 0x12,
+ .bit = 0x02,
+ },
+ {
+ .address = 0x28,
+ .reg = 0x13,
+ .bit = 0x02,
+ },
+ {
+ .address = 0x2c,
+ .reg = 0x13,
+ .bit = 0x03,
+ },
+ {
+ .address = 0x30,
+ .reg = 0x13,
+ .bit = 0x04,
+ },
+ {
+ .address = 0x38,
+ .reg = 0x10,
+ .bit = 0x03,
+ },
+ {
+ .address = 0x3c,
+ .reg = 0x10,
+ .bit = 0x06,
+ },
+ {
+ .address = 0x40,
+ .reg = 0x10,
+ .bit = 0x05,
+ },
+ {
+ .address = 0x44,
+ .reg = 0x10,
+ .bit = 0x04,
+ },
+ {
+ .address = 0x48,
+ .reg = 0x10,
+ .bit = 0x01,
+ },
+ {
+ .address = 0x4c,
+ .reg = 0x10,
+ .bit = 0x00
+ },
+};
+
+/* TMP0 - TMP5 are the same, all from GPADC */
+static struct pmic_table thermal_table[] = {
+ {
+ .address = 0x00,
+ .reg = XPOWER_GPADC_LOW
+ },
+ {
+ .address = 0x0c,
+ .reg = XPOWER_GPADC_LOW
+ },
+ {
+ .address = 0x18,
+ .reg = XPOWER_GPADC_LOW
+ },
+ {
+ .address = 0x24,
+ .reg = XPOWER_GPADC_LOW
+ },
+ {
+ .address = 0x30,
+ .reg = XPOWER_GPADC_LOW
+ },
+ {
+ .address = 0x3c,
+ .reg = XPOWER_GPADC_LOW
+ },
+};
+
+static int intel_xpower_pmic_get_power(struct regmap *regmap, int reg,
+ int bit, u64 *value)
+{
+ int data;
+
+ if (regmap_read(regmap, reg, &data))
+ return -EIO;
+
+ *value = (data & BIT(bit)) ? 1 : 0;
+ return 0;
+}
+
+static int intel_xpower_pmic_update_power(struct regmap *regmap, int reg,
+ int bit, bool on)
+{
+ int data;
+
+ if (regmap_read(regmap, reg, &data))
+ return -EIO;
+
+ if (on)
+ data |= BIT(bit);
+ else
+ data &= ~BIT(bit);
+
+ if (regmap_write(regmap, reg, data))
+ return -EIO;
+
+ return 0;
+}
+
+/**
+ * intel_xpower_pmic_get_raw_temp(): Get raw temperature reading from the PMIC
+ *
+ * @regmap: regmap of the PMIC device
+ * @reg: register to get the reading
+ *
+ * We could get the sensor value by manipulating the HW regs here, but since
+ * the axp288 IIO driver may also access the same regs at the same time, the
+ * APIs provided by IIO subsystem are used here instead to avoid problems. As
+ * a result, the two passed in params are of no actual use.
+ *
+ * Return a positive value on success, errno on failure.
+ */
+static int intel_xpower_pmic_get_raw_temp(struct regmap *regmap, int reg)
+{
+ struct iio_channel *gpadc_chan;
+ int ret, val;
+
+ gpadc_chan = iio_channel_get(NULL, "axp288-system-temp");
+ if (IS_ERR_OR_NULL(gpadc_chan))
+ return -EACCES;
+
+ ret = iio_read_channel_raw(gpadc_chan, &val);
+ if (ret < 0)
+ val = ret;
+
+ iio_channel_release(gpadc_chan);
+ return val;
+}
+
+static struct intel_pmic_opregion_data intel_xpower_pmic_opregion_data = {
+ .get_power = intel_xpower_pmic_get_power,
+ .update_power = intel_xpower_pmic_update_power,
+ .get_raw_temp = intel_xpower_pmic_get_raw_temp,
+ .power_table = power_table,
+ .power_table_count = ARRAY_SIZE(power_table),
+ .thermal_table = thermal_table,
+ .thermal_table_count = ARRAY_SIZE(thermal_table),
+};
+
+static acpi_status intel_xpower_pmic_gpio_handler(u32 function,
+ acpi_physical_address address, u32 bit_width, u64 *value,
+ void *handler_context, void *region_context)
+{
+ return AE_OK;
+}
+
+static int intel_xpower_pmic_opregion_probe(struct platform_device *pdev)
+{
+ struct device *parent = pdev->dev.parent;
+ struct axp20x_dev *axp20x = dev_get_drvdata(parent);
+ acpi_status status;
+ int result;
+
+ status = acpi_install_address_space_handler(ACPI_HANDLE(parent),
+ ACPI_ADR_SPACE_GPIO, intel_xpower_pmic_gpio_handler,
+ NULL, NULL);
+ if (ACPI_FAILURE(status))
+ return -ENODEV;
+
+ result = intel_pmic_install_opregion_handler(&pdev->dev,
+ ACPI_HANDLE(parent), axp20x->regmap,
+ &intel_xpower_pmic_opregion_data);
+ if (result)
+ acpi_remove_address_space_handler(ACPI_HANDLE(parent),
+ ACPI_ADR_SPACE_GPIO,
+ intel_xpower_pmic_gpio_handler);
+
+ return result;
+}
+
+static struct platform_driver intel_xpower_pmic_opregion_driver = {
+ .probe = intel_xpower_pmic_opregion_probe,
+ .driver = {
+ .name = "axp288_pmic_acpi",
+ },
+};
+
+static int __init intel_xpower_pmic_opregion_driver_init(void)
+{
+ return platform_driver_register(&intel_xpower_pmic_opregion_driver);
+}
+module_init(intel_xpower_pmic_opregion_driver_init);
+
+MODULE_DESCRIPTION("XPower AXP288 ACPI operation region driver");
+MODULE_LICENSE("GPL");
diff --git a/drivers/acpi/processor_idle.c b/drivers/acpi/processor_idle.c
index 17f9ec501972..499536504698 100644
--- a/drivers/acpi/processor_idle.c
+++ b/drivers/acpi/processor_idle.c
@@ -334,10 +334,10 @@ static int acpi_processor_get_power_info_default(struct acpi_processor *pr)
static int acpi_processor_get_power_info_cst(struct acpi_processor *pr)
{
- acpi_status status = 0;
+ acpi_status status;
u64 count;
int current_count;
- int i;
+ int i, ret = 0;
struct acpi_buffer buffer = { ACPI_ALLOCATE_BUFFER, NULL };
union acpi_object *cst;
@@ -358,7 +358,7 @@ static int acpi_processor_get_power_info_cst(struct acpi_processor *pr)
/* There must be at least 2 elements */
if (!cst || (cst->type != ACPI_TYPE_PACKAGE) || cst->package.count < 2) {
printk(KERN_ERR PREFIX "not enough elements in _CST\n");
- status = -EFAULT;
+ ret = -EFAULT;
goto end;
}
@@ -367,7 +367,7 @@ static int acpi_processor_get_power_info_cst(struct acpi_processor *pr)
/* Validate number of power states. */
if (count < 1 || count != cst->package.count - 1) {
printk(KERN_ERR PREFIX "count given by _CST is not valid\n");
- status = -EFAULT;
+ ret = -EFAULT;
goto end;
}
@@ -489,12 +489,12 @@ static int acpi_processor_get_power_info_cst(struct acpi_processor *pr)
/* Validate number of power states discovered */
if (current_count < 2)
- status = -EFAULT;
+ ret = -EFAULT;
end:
kfree(buffer.pointer);
- return status;
+ return ret;
}
static void acpi_processor_power_verify_c3(struct acpi_processor *pr,
@@ -985,8 +985,8 @@ static int acpi_processor_setup_cpuidle_states(struct acpi_processor *pr)
state->flags = 0;
switch (cx->type) {
case ACPI_STATE_C1:
- if (cx->entry_method == ACPI_CSTATE_FFH)
- state->flags |= CPUIDLE_FLAG_TIME_VALID;
+ if (cx->entry_method != ACPI_CSTATE_FFH)
+ state->flags |= CPUIDLE_FLAG_TIME_INVALID;
state->enter = acpi_idle_enter_c1;
state->enter_dead = acpi_idle_play_dead;
@@ -994,14 +994,12 @@ static int acpi_processor_setup_cpuidle_states(struct acpi_processor *pr)
break;
case ACPI_STATE_C2:
- state->flags |= CPUIDLE_FLAG_TIME_VALID;
state->enter = acpi_idle_enter_simple;
state->enter_dead = acpi_idle_play_dead;
drv->safe_state_index = count;
break;
case ACPI_STATE_C3:
- state->flags |= CPUIDLE_FLAG_TIME_VALID;
state->enter = pr->flags.bm_check ?
acpi_idle_enter_bm :
acpi_idle_enter_simple;
@@ -1111,7 +1109,7 @@ static int acpi_processor_registered;
int acpi_processor_power_init(struct acpi_processor *pr)
{
- acpi_status status = 0;
+ acpi_status status;
int retval;
struct cpuidle_device *dev;
static int first_run;
diff --git a/drivers/acpi/property.c b/drivers/acpi/property.c
new file mode 100644
index 000000000000..0d083736e25b
--- /dev/null
+++ b/drivers/acpi/property.c
@@ -0,0 +1,551 @@
+/*
+ * ACPI device specific properties support.
+ *
+ * Copyright (C) 2014, Intel Corporation
+ * All rights reserved.
+ *
+ * Authors: Mika Westerberg <mika.westerberg@linux.intel.com>
+ * Darren Hart <dvhart@linux.intel.com>
+ * Rafael J. Wysocki <rafael.j.wysocki@intel.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/acpi.h>
+#include <linux/device.h>
+#include <linux/export.h>
+
+#include "internal.h"
+
+/* ACPI _DSD device properties UUID: daffd814-6eba-4d8c-8a91-bc9bbf4aa301 */
+static const u8 prp_uuid[16] = {
+ 0x14, 0xd8, 0xff, 0xda, 0xba, 0x6e, 0x8c, 0x4d,
+ 0x8a, 0x91, 0xbc, 0x9b, 0xbf, 0x4a, 0xa3, 0x01
+};
+
+static bool acpi_property_value_ok(const union acpi_object *value)
+{
+ int j;
+
+ /*
+ * The value must be an integer, a string, a reference, or a package
+ * whose every element must be an integer, a string, or a reference.
+ */
+ switch (value->type) {
+ case ACPI_TYPE_INTEGER:
+ case ACPI_TYPE_STRING:
+ case ACPI_TYPE_LOCAL_REFERENCE:
+ return true;
+
+ case ACPI_TYPE_PACKAGE:
+ for (j = 0; j < value->package.count; j++)
+ switch (value->package.elements[j].type) {
+ case ACPI_TYPE_INTEGER:
+ case ACPI_TYPE_STRING:
+ case ACPI_TYPE_LOCAL_REFERENCE:
+ continue;
+
+ default:
+ return false;
+ }
+
+ return true;
+ }
+ return false;
+}
+
+static bool acpi_properties_format_valid(const union acpi_object *properties)
+{
+ int i;
+
+ for (i = 0; i < properties->package.count; i++) {
+ const union acpi_object *property;
+
+ property = &properties->package.elements[i];
+ /*
+ * Only two elements allowed, the first one must be a string and
+ * the second one has to satisfy certain conditions.
+ */
+ if (property->package.count != 2
+ || property->package.elements[0].type != ACPI_TYPE_STRING
+ || !acpi_property_value_ok(&property->package.elements[1]))
+ return false;
+ }
+ return true;
+}
+
+static void acpi_init_of_compatible(struct acpi_device *adev)
+{
+ const union acpi_object *of_compatible;
+ struct acpi_hardware_id *hwid;
+ bool acpi_of = false;
+ int ret;
+
+ /*
+ * Check if the special PRP0001 ACPI ID is present and in that
+ * case we fill in Device Tree compatible properties for this
+ * device.
+ */
+ list_for_each_entry(hwid, &adev->pnp.ids, list) {
+ if (!strcmp(hwid->id, "PRP0001")) {
+ acpi_of = true;
+ break;
+ }
+ }
+
+ if (!acpi_of)
+ return;
+
+ ret = acpi_dev_get_property_array(adev, "compatible", ACPI_TYPE_STRING,
+ &of_compatible);
+ if (ret) {
+ ret = acpi_dev_get_property(adev, "compatible",
+ ACPI_TYPE_STRING, &of_compatible);
+ if (ret) {
+ acpi_handle_warn(adev->handle,
+ "PRP0001 requires compatible property\n");
+ return;
+ }
+ }
+ adev->data.of_compatible = of_compatible;
+}
+
+void acpi_init_properties(struct acpi_device *adev)
+{
+ struct acpi_buffer buf = { ACPI_ALLOCATE_BUFFER };
+ const union acpi_object *desc;
+ acpi_status status;
+ int i;
+
+ status = acpi_evaluate_object_typed(adev->handle, "_DSD", NULL, &buf,
+ ACPI_TYPE_PACKAGE);
+ if (ACPI_FAILURE(status))
+ return;
+
+ desc = buf.pointer;
+ if (desc->package.count % 2)
+ goto fail;
+
+ /* Look for the device properties UUID. */
+ for (i = 0; i < desc->package.count; i += 2) {
+ const union acpi_object *uuid, *properties;
+
+ uuid = &desc->package.elements[i];
+ properties = &desc->package.elements[i + 1];
+
+ /*
+ * The first element must be a UUID and the second one must be
+ * a package.
+ */
+ if (uuid->type != ACPI_TYPE_BUFFER || uuid->buffer.length != 16
+ || properties->type != ACPI_TYPE_PACKAGE)
+ break;
+
+ if (memcmp(uuid->buffer.pointer, prp_uuid, sizeof(prp_uuid)))
+ continue;
+
+ /*
+ * We found the matching UUID. Now validate the format of the
+ * package immediately following it.
+ */
+ if (!acpi_properties_format_valid(properties))
+ break;
+
+ adev->data.pointer = buf.pointer;
+ adev->data.properties = properties;
+
+ acpi_init_of_compatible(adev);
+ return;
+ }
+
+ fail:
+ dev_warn(&adev->dev, "Returned _DSD data is not valid, skipping\n");
+ ACPI_FREE(buf.pointer);
+}
+
+void acpi_free_properties(struct acpi_device *adev)
+{
+ ACPI_FREE((void *)adev->data.pointer);
+ adev->data.of_compatible = NULL;
+ adev->data.pointer = NULL;
+ adev->data.properties = NULL;
+}
+
+/**
+ * acpi_dev_get_property - return an ACPI property with given name
+ * @adev: ACPI device to get property
+ * @name: Name of the property
+ * @type: Expected property type
+ * @obj: Location to store the property value (if not %NULL)
+ *
+ * Look up a property with @name and store a pointer to the resulting ACPI
+ * object at the location pointed to by @obj if found.
+ *
+ * Callers must not attempt to free the returned objects. These objects will be
+ * freed by the ACPI core automatically during the removal of @adev.
+ *
+ * Return: %0 if property with @name has been found (success),
+ * %-EINVAL if the arguments are invalid,
+ * %-ENODATA if the property doesn't exist,
+ * %-EPROTO if the property value type doesn't match @type.
+ */
+int acpi_dev_get_property(struct acpi_device *adev, const char *name,
+ acpi_object_type type, const union acpi_object **obj)
+{
+ const union acpi_object *properties;
+ int i;
+
+ if (!adev || !name)
+ return -EINVAL;
+
+ if (!adev->data.pointer || !adev->data.properties)
+ return -ENODATA;
+
+ properties = adev->data.properties;
+ for (i = 0; i < properties->package.count; i++) {
+ const union acpi_object *propname, *propvalue;
+ const union acpi_object *property;
+
+ property = &properties->package.elements[i];
+
+ propname = &property->package.elements[0];
+ propvalue = &property->package.elements[1];
+
+ if (!strcmp(name, propname->string.pointer)) {
+ if (type != ACPI_TYPE_ANY && propvalue->type != type)
+ return -EPROTO;
+ else if (obj)
+ *obj = propvalue;
+
+ return 0;
+ }
+ }
+ return -ENODATA;
+}
+EXPORT_SYMBOL_GPL(acpi_dev_get_property);
+
+/**
+ * acpi_dev_get_property_array - return an ACPI array property with given name
+ * @adev: ACPI device to get property
+ * @name: Name of the property
+ * @type: Expected type of array elements
+ * @obj: Location to store a pointer to the property value (if not NULL)
+ *
+ * Look up an array property with @name and store a pointer to the resulting
+ * ACPI object at the location pointed to by @obj if found.
+ *
+ * Callers must not attempt to free the returned objects. Those objects will be
+ * freed by the ACPI core automatically during the removal of @adev.
+ *
+ * Return: %0 if array property (package) with @name has been found (success),
+ * %-EINVAL if the arguments are invalid,
+ * %-ENODATA if the property doesn't exist,
+ * %-EPROTO if the property is not a package or the type of its elements
+ * doesn't match @type.
+ */
+int acpi_dev_get_property_array(struct acpi_device *adev, const char *name,
+ acpi_object_type type,
+ const union acpi_object **obj)
+{
+ const union acpi_object *prop;
+ int ret, i;
+
+ ret = acpi_dev_get_property(adev, name, ACPI_TYPE_PACKAGE, &prop);
+ if (ret)
+ return ret;
+
+ if (type != ACPI_TYPE_ANY) {
+ /* Check that all elements are of correct type. */
+ for (i = 0; i < prop->package.count; i++)
+ if (prop->package.elements[i].type != type)
+ return -EPROTO;
+ }
+ if (obj)
+ *obj = prop;
+
+ return 0;
+}
+EXPORT_SYMBOL_GPL(acpi_dev_get_property_array);
+
+/**
+ * acpi_dev_get_property_reference - returns handle to the referenced object
+ * @adev: ACPI device to get property
+ * @name: Name of the property
+ * @index: Index of the reference to return
+ * @args: Location to store the returned reference with optional arguments
+ *
+ * Find property with @name, verifify that it is a package containing at least
+ * one object reference and if so, store the ACPI device object pointer to the
+ * target object in @args->adev. If the reference includes arguments, store
+ * them in the @args->args[] array.
+ *
+ * If there's more than one reference in the property value package, @index is
+ * used to select the one to return.
+ *
+ * Return: %0 on success, negative error code on failure.
+ */
+int acpi_dev_get_property_reference(struct acpi_device *adev,
+ const char *name, size_t index,
+ struct acpi_reference_args *args)
+{
+ const union acpi_object *element, *end;
+ const union acpi_object *obj;
+ struct acpi_device *device;
+ int ret, idx = 0;
+
+ ret = acpi_dev_get_property(adev, name, ACPI_TYPE_ANY, &obj);
+ if (ret)
+ return ret;
+
+ /*
+ * The simplest case is when the value is a single reference. Just
+ * return that reference then.
+ */
+ if (obj->type == ACPI_TYPE_LOCAL_REFERENCE) {
+ if (index)
+ return -EINVAL;
+
+ ret = acpi_bus_get_device(obj->reference.handle, &device);
+ if (ret)
+ return ret;
+
+ args->adev = device;
+ args->nargs = 0;
+ return 0;
+ }
+
+ /*
+ * If it is not a single reference, then it is a package of
+ * references followed by number of ints as follows:
+ *
+ * Package () { REF, INT, REF, INT, INT }
+ *
+ * The index argument is then used to determine which reference
+ * the caller wants (along with the arguments).
+ */
+ if (obj->type != ACPI_TYPE_PACKAGE || index >= obj->package.count)
+ return -EPROTO;
+
+ element = obj->package.elements;
+ end = element + obj->package.count;
+
+ while (element < end) {
+ u32 nargs, i;
+
+ if (element->type != ACPI_TYPE_LOCAL_REFERENCE)
+ return -EPROTO;
+
+ ret = acpi_bus_get_device(element->reference.handle, &device);
+ if (ret)
+ return -ENODEV;
+
+ element++;
+ nargs = 0;
+
+ /* assume following integer elements are all args */
+ for (i = 0; element + i < end; i++) {
+ int type = element[i].type;
+
+ if (type == ACPI_TYPE_INTEGER)
+ nargs++;
+ else if (type == ACPI_TYPE_LOCAL_REFERENCE)
+ break;
+ else
+ return -EPROTO;
+ }
+
+ if (idx++ == index) {
+ args->adev = device;
+ args->nargs = nargs;
+ for (i = 0; i < nargs; i++)
+ args->args[i] = element[i].integer.value;
+
+ return 0;
+ }
+
+ element += nargs;
+ }
+
+ return -EPROTO;
+}
+EXPORT_SYMBOL_GPL(acpi_dev_get_property_reference);
+
+int acpi_dev_prop_get(struct acpi_device *adev, const char *propname,
+ void **valptr)
+{
+ return acpi_dev_get_property(adev, propname, ACPI_TYPE_ANY,
+ (const union acpi_object **)valptr);
+}
+
+int acpi_dev_prop_read_single(struct acpi_device *adev, const char *propname,
+ enum dev_prop_type proptype, void *val)
+{
+ const union acpi_object *obj;
+ int ret;
+
+ if (!val)
+ return -EINVAL;
+
+ if (proptype >= DEV_PROP_U8 && proptype <= DEV_PROP_U64) {
+ ret = acpi_dev_get_property(adev, propname, ACPI_TYPE_INTEGER, &obj);
+ if (ret)
+ return ret;
+
+ switch (proptype) {
+ case DEV_PROP_U8:
+ if (obj->integer.value > U8_MAX)
+ return -EOVERFLOW;
+ *(u8 *)val = obj->integer.value;
+ break;
+ case DEV_PROP_U16:
+ if (obj->integer.value > U16_MAX)
+ return -EOVERFLOW;
+ *(u16 *)val = obj->integer.value;
+ break;
+ case DEV_PROP_U32:
+ if (obj->integer.value > U32_MAX)
+ return -EOVERFLOW;
+ *(u32 *)val = obj->integer.value;
+ break;
+ default:
+ *(u64 *)val = obj->integer.value;
+ break;
+ }
+ } else if (proptype == DEV_PROP_STRING) {
+ ret = acpi_dev_get_property(adev, propname, ACPI_TYPE_STRING, &obj);
+ if (ret)
+ return ret;
+
+ *(char **)val = obj->string.pointer;
+ } else {
+ ret = -EINVAL;
+ }
+ return ret;
+}
+
+static int acpi_copy_property_array_u8(const union acpi_object *items, u8 *val,
+ size_t nval)
+{
+ int i;
+
+ for (i = 0; i < nval; i++) {
+ if (items[i].type != ACPI_TYPE_INTEGER)
+ return -EPROTO;
+ if (items[i].integer.value > U8_MAX)
+ return -EOVERFLOW;
+
+ val[i] = items[i].integer.value;
+ }
+ return 0;
+}
+
+static int acpi_copy_property_array_u16(const union acpi_object *items,
+ u16 *val, size_t nval)
+{
+ int i;
+
+ for (i = 0; i < nval; i++) {
+ if (items[i].type != ACPI_TYPE_INTEGER)
+ return -EPROTO;
+ if (items[i].integer.value > U16_MAX)
+ return -EOVERFLOW;
+
+ val[i] = items[i].integer.value;
+ }
+ return 0;
+}
+
+static int acpi_copy_property_array_u32(const union acpi_object *items,
+ u32 *val, size_t nval)
+{
+ int i;
+
+ for (i = 0; i < nval; i++) {
+ if (items[i].type != ACPI_TYPE_INTEGER)
+ return -EPROTO;
+ if (items[i].integer.value > U32_MAX)
+ return -EOVERFLOW;
+
+ val[i] = items[i].integer.value;
+ }
+ return 0;
+}
+
+static int acpi_copy_property_array_u64(const union acpi_object *items,
+ u64 *val, size_t nval)
+{
+ int i;
+
+ for (i = 0; i < nval; i++) {
+ if (items[i].type != ACPI_TYPE_INTEGER)
+ return -EPROTO;
+
+ val[i] = items[i].integer.value;
+ }
+ return 0;
+}
+
+static int acpi_copy_property_array_string(const union acpi_object *items,
+ char **val, size_t nval)
+{
+ int i;
+
+ for (i = 0; i < nval; i++) {
+ if (items[i].type != ACPI_TYPE_STRING)
+ return -EPROTO;
+
+ val[i] = items[i].string.pointer;
+ }
+ return 0;
+}
+
+int acpi_dev_prop_read(struct acpi_device *adev, const char *propname,
+ enum dev_prop_type proptype, void *val, size_t nval)
+{
+ const union acpi_object *obj;
+ const union acpi_object *items;
+ int ret;
+
+ if (val && nval == 1) {
+ ret = acpi_dev_prop_read_single(adev, propname, proptype, val);
+ if (!ret)
+ return ret;
+ }
+
+ ret = acpi_dev_get_property_array(adev, propname, ACPI_TYPE_ANY, &obj);
+ if (ret)
+ return ret;
+
+ if (!val)
+ return obj->package.count;
+ else if (nval <= 0)
+ return -EINVAL;
+
+ if (nval > obj->package.count)
+ return -EOVERFLOW;
+
+ items = obj->package.elements;
+ switch (proptype) {
+ case DEV_PROP_U8:
+ ret = acpi_copy_property_array_u8(items, (u8 *)val, nval);
+ break;
+ case DEV_PROP_U16:
+ ret = acpi_copy_property_array_u16(items, (u16 *)val, nval);
+ break;
+ case DEV_PROP_U32:
+ ret = acpi_copy_property_array_u32(items, (u32 *)val, nval);
+ break;
+ case DEV_PROP_U64:
+ ret = acpi_copy_property_array_u64(items, (u64 *)val, nval);
+ break;
+ case DEV_PROP_STRING:
+ ret = acpi_copy_property_array_string(items, (char **)val, nval);
+ break;
+ default:
+ ret = -EINVAL;
+ break;
+ }
+ return ret;
+}
diff --git a/drivers/acpi/scan.c b/drivers/acpi/scan.c
index 0476e90b2091..1b1cf558d3d3 100644
--- a/drivers/acpi/scan.c
+++ b/drivers/acpi/scan.c
@@ -36,6 +36,8 @@ bool acpi_force_hot_remove;
static const char *dummy_hid = "device";
+static LIST_HEAD(acpi_dep_list);
+static DEFINE_MUTEX(acpi_dep_list_lock);
static LIST_HEAD(acpi_bus_id_list);
static DEFINE_MUTEX(acpi_scan_lock);
static LIST_HEAD(acpi_scan_handlers_list);
@@ -43,6 +45,12 @@ DEFINE_MUTEX(acpi_device_lock);
LIST_HEAD(acpi_wakeup_device_list);
static DEFINE_MUTEX(acpi_hp_context_lock);
+struct acpi_dep_data {
+ struct list_head node;
+ acpi_handle master;
+ acpi_handle slave;
+};
+
struct acpi_device_bus_id{
char bus_id[15];
unsigned int instance_no;
@@ -124,17 +132,56 @@ static int create_modalias(struct acpi_device *acpi_dev, char *modalias,
if (list_empty(&acpi_dev->pnp.ids))
return 0;
- len = snprintf(modalias, size, "acpi:");
- size -= len;
-
- list_for_each_entry(id, &acpi_dev->pnp.ids, list) {
- count = snprintf(&modalias[len], size, "%s:", id->id);
- if (count < 0)
- return -EINVAL;
- if (count >= size)
- return -ENOMEM;
- len += count;
- size -= count;
+ /*
+ * If the device has PRP0001 we expose DT compatible modalias
+ * instead in form of of:NnameTCcompatible.
+ */
+ if (acpi_dev->data.of_compatible) {
+ struct acpi_buffer buf = { ACPI_ALLOCATE_BUFFER };
+ const union acpi_object *of_compatible, *obj;
+ int i, nval;
+ char *c;
+
+ acpi_get_name(acpi_dev->handle, ACPI_SINGLE_NAME, &buf);
+ /* DT strings are all in lower case */
+ for (c = buf.pointer; *c != '\0'; c++)
+ *c = tolower(*c);
+
+ len = snprintf(modalias, size, "of:N%sT", (char *)buf.pointer);
+ ACPI_FREE(buf.pointer);
+
+ of_compatible = acpi_dev->data.of_compatible;
+ if (of_compatible->type == ACPI_TYPE_PACKAGE) {
+ nval = of_compatible->package.count;
+ obj = of_compatible->package.elements;
+ } else { /* Must be ACPI_TYPE_STRING. */
+ nval = 1;
+ obj = of_compatible;
+ }
+ for (i = 0; i < nval; i++, obj++) {
+ count = snprintf(&modalias[len], size, "C%s",
+ obj->string.pointer);
+ if (count < 0)
+ return -EINVAL;
+ if (count >= size)
+ return -ENOMEM;
+
+ len += count;
+ size -= count;
+ }
+ } else {
+ len = snprintf(modalias, size, "acpi:");
+ size -= len;
+
+ list_for_each_entry(id, &acpi_dev->pnp.ids, list) {
+ count = snprintf(&modalias[len], size, "%s:", id->id);
+ if (count < 0)
+ return -EINVAL;
+ if (count >= size)
+ return -ENOMEM;
+ len += count;
+ size -= count;
+ }
}
modalias[len] = '\0';
@@ -902,6 +949,51 @@ int acpi_match_device_ids(struct acpi_device *device,
}
EXPORT_SYMBOL(acpi_match_device_ids);
+/* Performs match against special "PRP0001" shoehorn ACPI ID */
+static bool acpi_of_driver_match_device(struct device *dev,
+ const struct device_driver *drv)
+{
+ const union acpi_object *of_compatible, *obj;
+ struct acpi_device *adev;
+ int i, nval;
+
+ adev = ACPI_COMPANION(dev);
+ if (!adev)
+ return false;
+
+ of_compatible = adev->data.of_compatible;
+ if (!drv->of_match_table || !of_compatible)
+ return false;
+
+ if (of_compatible->type == ACPI_TYPE_PACKAGE) {
+ nval = of_compatible->package.count;
+ obj = of_compatible->package.elements;
+ } else { /* Must be ACPI_TYPE_STRING. */
+ nval = 1;
+ obj = of_compatible;
+ }
+ /* Now we can look for the driver DT compatible strings */
+ for (i = 0; i < nval; i++, obj++) {
+ const struct of_device_id *id;
+
+ for (id = drv->of_match_table; id->compatible[0]; id++)
+ if (!strcasecmp(obj->string.pointer, id->compatible))
+ return true;
+ }
+
+ return false;
+}
+
+bool acpi_driver_match_device(struct device *dev,
+ const struct device_driver *drv)
+{
+ if (!drv->acpi_match_table)
+ return acpi_of_driver_match_device(dev, drv);
+
+ return !!acpi_match_device(drv->acpi_match_table, dev);
+}
+EXPORT_SYMBOL_GPL(acpi_driver_match_device);
+
static void acpi_free_power_resources_lists(struct acpi_device *device)
{
int i;
@@ -922,6 +1014,7 @@ static void acpi_device_release(struct device *dev)
{
struct acpi_device *acpi_dev = to_acpi_device(dev);
+ acpi_free_properties(acpi_dev);
acpi_free_pnp_ids(&acpi_dev->pnp);
acpi_free_power_resources_lists(acpi_dev);
kfree(acpi_dev);
@@ -1304,6 +1397,26 @@ int acpi_device_add(struct acpi_device *device,
return result;
}
+struct acpi_device *acpi_get_next_child(struct device *dev,
+ struct acpi_device *child)
+{
+ struct acpi_device *adev = ACPI_COMPANION(dev);
+ struct list_head *head, *next;
+
+ if (!adev)
+ return NULL;
+
+ head = &adev->children;
+ if (list_empty(head))
+ return NULL;
+
+ if (!child)
+ return list_first_entry(head, struct acpi_device, node);
+
+ next = child->node.next;
+ return next == head ? NULL : list_entry(next, struct acpi_device, node);
+}
+
/* --------------------------------------------------------------------------
Driver Management
-------------------------------------------------------------------------- */
@@ -1923,9 +2036,11 @@ void acpi_init_device_object(struct acpi_device *device, acpi_handle handle,
device->device_type = type;
device->handle = handle;
device->parent = acpi_bus_get_parent(handle);
+ device->fwnode.type = FWNODE_ACPI;
acpi_set_device_status(device, sta);
acpi_device_get_busid(device);
acpi_set_pnp_ids(handle, &device->pnp, type);
+ acpi_init_properties(device);
acpi_bus_get_flags(device);
device->flags.match_driver = false;
device->flags.initialized = true;
@@ -2086,6 +2201,59 @@ static void acpi_scan_init_hotplug(struct acpi_device *adev)
}
}
+static void acpi_device_dep_initialize(struct acpi_device *adev)
+{
+ struct acpi_dep_data *dep;
+ struct acpi_handle_list dep_devices;
+ acpi_status status;
+ int i;
+
+ if (!acpi_has_method(adev->handle, "_DEP"))
+ return;
+
+ status = acpi_evaluate_reference(adev->handle, "_DEP", NULL,
+ &dep_devices);
+ if (ACPI_FAILURE(status)) {
+ dev_err(&adev->dev, "Failed to evaluate _DEP.\n");
+ return;
+ }
+
+ for (i = 0; i < dep_devices.count; i++) {
+ struct acpi_device_info *info;
+ int skip;
+
+ status = acpi_get_object_info(dep_devices.handles[i], &info);
+ if (ACPI_FAILURE(status)) {
+ dev_err(&adev->dev, "Error reading device info\n");
+ continue;
+ }
+
+ /*
+ * Skip the dependency of Windows System Power
+ * Management Controller
+ */
+ skip = info->valid & ACPI_VALID_HID &&
+ !strcmp(info->hardware_id.string, "INT3396");
+
+ kfree(info);
+
+ if (skip)
+ continue;
+
+ dep = kzalloc(sizeof(struct acpi_dep_data), GFP_KERNEL);
+ if (!dep)
+ return;
+
+ dep->master = dep_devices.handles[i];
+ dep->slave = adev->handle;
+ adev->dep_unmet++;
+
+ mutex_lock(&acpi_dep_list_lock);
+ list_add_tail(&dep->node , &acpi_dep_list);
+ mutex_unlock(&acpi_dep_list_lock);
+ }
+}
+
static acpi_status acpi_bus_check_add(acpi_handle handle, u32 lvl_not_used,
void *not_used, void **return_value)
{
@@ -2112,6 +2280,7 @@ static acpi_status acpi_bus_check_add(acpi_handle handle, u32 lvl_not_used,
return AE_CTRL_DEPTH;
acpi_scan_init_hotplug(device);
+ acpi_device_dep_initialize(device);
out:
if (!*return_value)
@@ -2232,6 +2401,29 @@ static void acpi_bus_attach(struct acpi_device *device)
device->handler->hotplug.notify_online(device);
}
+void acpi_walk_dep_device_list(acpi_handle handle)
+{
+ struct acpi_dep_data *dep, *tmp;
+ struct acpi_device *adev;
+
+ mutex_lock(&acpi_dep_list_lock);
+ list_for_each_entry_safe(dep, tmp, &acpi_dep_list, node) {
+ if (dep->master == handle) {
+ acpi_bus_get_device(dep->slave, &adev);
+ if (!adev)
+ continue;
+
+ adev->dep_unmet--;
+ if (!adev->dep_unmet)
+ acpi_bus_attach(adev);
+ list_del(&dep->node);
+ kfree(dep);
+ }
+ }
+ mutex_unlock(&acpi_dep_list_lock);
+}
+EXPORT_SYMBOL_GPL(acpi_walk_dep_device_list);
+
/**
* acpi_bus_scan - Add ACPI device node objects in a given namespace scope.
* @handle: Root of the namespace scope to scan.
diff --git a/drivers/acpi/sleep.c b/drivers/acpi/sleep.c
index 05a31b573fc3..8aa9254a387f 100644
--- a/drivers/acpi/sleep.c
+++ b/drivers/acpi/sleep.c
@@ -630,6 +630,7 @@ static int acpi_freeze_begin(void)
static int acpi_freeze_prepare(void)
{
acpi_enable_all_wakeup_gpes();
+ acpi_os_wait_events_complete();
enable_irq_wake(acpi_gbl_FADT.sci_interrupt);
return 0;
}
@@ -825,6 +826,7 @@ static void acpi_power_off_prepare(void)
/* Prepare to power off the system */
acpi_sleep_prepare(ACPI_STATE_S5);
acpi_disable_all_gpes();
+ acpi_os_wait_events_complete();
}
static void acpi_power_off(void)
diff --git a/drivers/acpi/tables.c b/drivers/acpi/tables.c
index 6d5a6cda0734..93b81523a2fe 100644
--- a/drivers/acpi/tables.c
+++ b/drivers/acpi/tables.c
@@ -190,30 +190,24 @@ void acpi_table_print_madt_entry(struct acpi_subtable_header *header)
}
}
-
int __init
-acpi_table_parse_entries(char *id,
- unsigned long table_size,
- int entry_id,
- acpi_tbl_entry_handler handler,
- unsigned int max_entries)
+acpi_parse_entries(char *id, unsigned long table_size,
+ acpi_tbl_entry_handler handler,
+ struct acpi_table_header *table_header,
+ int entry_id, unsigned int max_entries)
{
- struct acpi_table_header *table_header = NULL;
struct acpi_subtable_header *entry;
- unsigned int count = 0;
+ int count = 0;
unsigned long table_end;
- acpi_size tbl_size;
if (acpi_disabled)
return -ENODEV;
- if (!handler)
+ if (!id || !handler)
return -EINVAL;
- if (strncmp(id, ACPI_SIG_MADT, 4) == 0)
- acpi_get_table_with_size(id, acpi_apic_instance, &table_header, &tbl_size);
- else
- acpi_get_table_with_size(id, 0, &table_header, &tbl_size);
+ if (!table_size)
+ return -EINVAL;
if (!table_header) {
pr_warn("%4.4s not present\n", id);
@@ -230,9 +224,12 @@ acpi_table_parse_entries(char *id,
while (((unsigned long)entry) + sizeof(struct acpi_subtable_header) <
table_end) {
if (entry->type == entry_id
- && (!max_entries || count++ < max_entries))
+ && (!max_entries || count < max_entries)) {
if (handler(entry, table_end))
- goto err;
+ return -EINVAL;
+
+ count++;
+ }
/*
* If entry->length is 0, break from this loop to avoid
@@ -240,22 +237,53 @@ acpi_table_parse_entries(char *id,
*/
if (entry->length == 0) {
pr_err("[%4.4s:0x%02x] Invalid zero length\n", id, entry_id);
- goto err;
+ return -EINVAL;
}
entry = (struct acpi_subtable_header *)
((unsigned long)entry + entry->length);
}
+
if (max_entries && count > max_entries) {
pr_warn("[%4.4s:0x%02x] ignored %i entries of %i found\n",
id, entry_id, count - max_entries, count);
}
- early_acpi_os_unmap_memory((char *)table_header, tbl_size);
return count;
-err:
+}
+
+int __init
+acpi_table_parse_entries(char *id,
+ unsigned long table_size,
+ int entry_id,
+ acpi_tbl_entry_handler handler,
+ unsigned int max_entries)
+{
+ struct acpi_table_header *table_header = NULL;
+ acpi_size tbl_size;
+ int count;
+ u32 instance = 0;
+
+ if (acpi_disabled)
+ return -ENODEV;
+
+ if (!id || !handler)
+ return -EINVAL;
+
+ if (!strncmp(id, ACPI_SIG_MADT, 4))
+ instance = acpi_apic_instance;
+
+ acpi_get_table_with_size(id, instance, &table_header, &tbl_size);
+ if (!table_header) {
+ pr_warn("%4.4s not present\n", id);
+ return -ENODEV;
+ }
+
+ count = acpi_parse_entries(id, table_size, handler, table_header,
+ entry_id, max_entries);
+
early_acpi_os_unmap_memory((char *)table_header, tbl_size);
- return -EINVAL;
+ return count;
}
int __init
diff --git a/drivers/acpi/utils.c b/drivers/acpi/utils.c
index 371ac12d25b1..dd8ff63ee2b4 100644
--- a/drivers/acpi/utils.c
+++ b/drivers/acpi/utils.c
@@ -136,8 +136,7 @@ acpi_extract_package(union acpi_object *package,
break;
case 'B':
size_required +=
- sizeof(u8 *) +
- (element->buffer.length * sizeof(u8));
+ sizeof(u8 *) + element->buffer.length;
tail_offset += sizeof(u8 *);
break;
default:
@@ -255,7 +254,7 @@ acpi_extract_package(union acpi_object *package,
memcpy(tail, element->buffer.pointer,
element->buffer.length);
head += sizeof(u8 *);
- tail += element->buffer.length * sizeof(u8);
+ tail += element->buffer.length;
break;
default:
/* Should never get here */
diff --git a/drivers/acpi/video.c b/drivers/acpi/video.c
index 9d75ead2a1f9..185a57d13723 100644
--- a/drivers/acpi/video.c
+++ b/drivers/acpi/video.c
@@ -1681,6 +1681,19 @@ static void acpi_video_dev_register_backlight(struct acpi_video_device *device)
printk(KERN_ERR PREFIX "Create sysfs link\n");
}
+static void acpi_video_run_bcl_for_osi(struct acpi_video_bus *video)
+{
+ struct acpi_video_device *dev;
+ union acpi_object *levels;
+
+ mutex_lock(&video->device_list_lock);
+ list_for_each_entry(dev, &video->video_device_list, entry) {
+ if (!acpi_video_device_lcd_query_levels(dev, &levels))
+ kfree(levels);
+ }
+ mutex_unlock(&video->device_list_lock);
+}
+
static int acpi_video_bus_register_backlight(struct acpi_video_bus *video)
{
struct acpi_video_device *dev;
@@ -1688,6 +1701,8 @@ static int acpi_video_bus_register_backlight(struct acpi_video_bus *video)
if (video->backlight_registered)
return 0;
+ acpi_video_run_bcl_for_osi(video);
+
if (!acpi_video_verify_backlight_support())
return 0;
diff --git a/drivers/amba/bus.c b/drivers/amba/bus.c
index 47bbdc1b5be3..973a3332a85f 100644
--- a/drivers/amba/bus.c
+++ b/drivers/amba/bus.c
@@ -124,7 +124,7 @@ static const struct dev_pm_ops amba_pm = {
.thaw = pm_generic_thaw,
.poweroff = pm_generic_poweroff,
.restore = pm_generic_restore,
- SET_PM_RUNTIME_PM_OPS(
+ SET_RUNTIME_PM_OPS(
amba_pm_runtime_suspend,
amba_pm_runtime_resume,
NULL
diff --git a/drivers/base/Makefile b/drivers/base/Makefile
index 6922cd6850a2..53c3fe1aeb29 100644
--- a/drivers/base/Makefile
+++ b/drivers/base/Makefile
@@ -4,7 +4,7 @@ obj-y := component.o core.o bus.o dd.o syscore.o \
driver.o class.o platform.o \
cpu.o firmware.o init.o map.o devres.o \
attribute_container.o transport_class.o \
- topology.o container.o
+ topology.o container.o property.o
obj-$(CONFIG_DEVTMPFS) += devtmpfs.o
obj-$(CONFIG_DMA_CMA) += dma-contiguous.o
obj-y += power/
diff --git a/drivers/base/power/clock_ops.c b/drivers/base/power/clock_ops.c
index 78369305e069..d626576a4f75 100644
--- a/drivers/base/power/clock_ops.c
+++ b/drivers/base/power/clock_ops.c
@@ -12,6 +12,7 @@
#include <linux/pm.h>
#include <linux/pm_clock.h>
#include <linux/clk.h>
+#include <linux/clkdev.h>
#include <linux/slab.h>
#include <linux/err.h>
@@ -34,14 +35,20 @@ struct pm_clock_entry {
/**
* pm_clk_enable - Enable a clock, reporting any errors
* @dev: The device for the given clock
- * @clk: The clock being enabled.
+ * @ce: PM clock entry corresponding to the clock.
*/
-static inline int __pm_clk_enable(struct device *dev, struct clk *clk)
+static inline int __pm_clk_enable(struct device *dev, struct pm_clock_entry *ce)
{
- int ret = clk_enable(clk);
- if (ret)
- dev_err(dev, "%s: failed to enable clk %p, error %d\n",
- __func__, clk, ret);
+ int ret;
+
+ if (ce->status < PCE_STATUS_ERROR) {
+ ret = clk_enable(ce->clk);
+ if (!ret)
+ ce->status = PCE_STATUS_ENABLED;
+ else
+ dev_err(dev, "%s: failed to enable clk %p, error %d\n",
+ __func__, ce->clk, ret);
+ }
return ret;
}
@@ -53,7 +60,8 @@ static inline int __pm_clk_enable(struct device *dev, struct clk *clk)
*/
static void pm_clk_acquire(struct device *dev, struct pm_clock_entry *ce)
{
- ce->clk = clk_get(dev, ce->con_id);
+ if (!ce->clk)
+ ce->clk = clk_get(dev, ce->con_id);
if (IS_ERR(ce->clk)) {
ce->status = PCE_STATUS_ERROR;
} else {
@@ -63,15 +71,8 @@ static void pm_clk_acquire(struct device *dev, struct pm_clock_entry *ce)
}
}
-/**
- * pm_clk_add - Start using a device clock for power management.
- * @dev: Device whose clock is going to be used for power management.
- * @con_id: Connection ID of the clock.
- *
- * Add the clock represented by @con_id to the list of clocks used for
- * the power management of @dev.
- */
-int pm_clk_add(struct device *dev, const char *con_id)
+static int __pm_clk_add(struct device *dev, const char *con_id,
+ struct clk *clk)
{
struct pm_subsys_data *psd = dev_to_psd(dev);
struct pm_clock_entry *ce;
@@ -93,6 +94,12 @@ int pm_clk_add(struct device *dev, const char *con_id)
kfree(ce);
return -ENOMEM;
}
+ } else {
+ if (IS_ERR(ce->clk) || !__clk_get(clk)) {
+ kfree(ce);
+ return -ENOENT;
+ }
+ ce->clk = clk;
}
pm_clk_acquire(dev, ce);
@@ -104,6 +111,32 @@ int pm_clk_add(struct device *dev, const char *con_id)
}
/**
+ * pm_clk_add - Start using a device clock for power management.
+ * @dev: Device whose clock is going to be used for power management.
+ * @con_id: Connection ID of the clock.
+ *
+ * Add the clock represented by @con_id to the list of clocks used for
+ * the power management of @dev.
+ */
+int pm_clk_add(struct device *dev, const char *con_id)
+{
+ return __pm_clk_add(dev, con_id, NULL);
+}
+
+/**
+ * pm_clk_add_clk - Start using a device clock for power management.
+ * @dev: Device whose clock is going to be used for power management.
+ * @clk: Clock pointer
+ *
+ * Add the clock to the list of clocks used for the power management of @dev.
+ * It will increment refcount on clock pointer, use clk_put() on it when done.
+ */
+int pm_clk_add_clk(struct device *dev, struct clk *clk)
+{
+ return __pm_clk_add(dev, NULL, clk);
+}
+
+/**
* __pm_clk_remove - Destroy PM clock entry.
* @ce: PM clock entry to destroy.
*/
@@ -223,10 +256,6 @@ void pm_clk_destroy(struct device *dev)
}
}
-#endif /* CONFIG_PM */
-
-#ifdef CONFIG_PM_RUNTIME
-
/**
* pm_clk_suspend - Disable clocks in a device's PM clock list.
* @dev: Device to disable the clocks for.
@@ -266,7 +295,6 @@ int pm_clk_resume(struct device *dev)
struct pm_subsys_data *psd = dev_to_psd(dev);
struct pm_clock_entry *ce;
unsigned long flags;
- int ret;
dev_dbg(dev, "%s()\n", __func__);
@@ -275,13 +303,8 @@ int pm_clk_resume(struct device *dev)
spin_lock_irqsave(&psd->lock, flags);
- list_for_each_entry(ce, &psd->clock_list, node) {
- if (ce->status < PCE_STATUS_ERROR) {
- ret = __pm_clk_enable(dev, ce->clk);
- if (!ret)
- ce->status = PCE_STATUS_ENABLED;
- }
- }
+ list_for_each_entry(ce, &psd->clock_list, node)
+ __pm_clk_enable(dev, ce);
spin_unlock_irqrestore(&psd->lock, flags);
@@ -346,74 +369,7 @@ static int pm_clk_notify(struct notifier_block *nb,
return 0;
}
-#else /* !CONFIG_PM_RUNTIME */
-
-#ifdef CONFIG_PM
-
-/**
- * pm_clk_suspend - Disable clocks in a device's PM clock list.
- * @dev: Device to disable the clocks for.
- */
-int pm_clk_suspend(struct device *dev)
-{
- struct pm_subsys_data *psd = dev_to_psd(dev);
- struct pm_clock_entry *ce;
- unsigned long flags;
-
- dev_dbg(dev, "%s()\n", __func__);
-
- /* If there is no driver, the clocks are already disabled. */
- if (!psd || !dev->driver)
- return 0;
-
- spin_lock_irqsave(&psd->lock, flags);
-
- list_for_each_entry_reverse(ce, &psd->clock_list, node) {
- if (ce->status < PCE_STATUS_ERROR) {
- if (ce->status == PCE_STATUS_ENABLED)
- clk_disable(ce->clk);
- ce->status = PCE_STATUS_ACQUIRED;
- }
- }
-
- spin_unlock_irqrestore(&psd->lock, flags);
-
- return 0;
-}
-
-/**
- * pm_clk_resume - Enable clocks in a device's PM clock list.
- * @dev: Device to enable the clocks for.
- */
-int pm_clk_resume(struct device *dev)
-{
- struct pm_subsys_data *psd = dev_to_psd(dev);
- struct pm_clock_entry *ce;
- unsigned long flags;
- int ret;
-
- dev_dbg(dev, "%s()\n", __func__);
-
- /* If there is no driver, the clocks should remain disabled. */
- if (!psd || !dev->driver)
- return 0;
-
- spin_lock_irqsave(&psd->lock, flags);
-
- list_for_each_entry(ce, &psd->clock_list, node) {
- if (ce->status < PCE_STATUS_ERROR) {
- ret = __pm_clk_enable(dev, ce->clk);
- if (!ret)
- ce->status = PCE_STATUS_ENABLED;
- }
- }
-
- spin_unlock_irqrestore(&psd->lock, flags);
-
- return 0;
-}
-
-#endif /* CONFIG_PM */
+#else /* !CONFIG_PM */
/**
* enable_clock - Enable a device clock.
@@ -493,7 +449,7 @@ static int pm_clk_notify(struct notifier_block *nb,
return 0;
}
-#endif /* !CONFIG_PM_RUNTIME */
+#endif /* !CONFIG_PM */
/**
* pm_clk_add_notifier - Add bus type notifier for power management clocks.
diff --git a/drivers/base/power/domain.c b/drivers/base/power/domain.c
index fb83d4acd400..6a103a35ea9b 100644
--- a/drivers/base/power/domain.c
+++ b/drivers/base/power/domain.c
@@ -12,6 +12,7 @@
#include <linux/pm_runtime.h>
#include <linux/pm_domain.h>
#include <linux/pm_qos.h>
+#include <linux/pm_clock.h>
#include <linux/slab.h>
#include <linux/err.h>
#include <linux/sched.h>
@@ -151,6 +152,59 @@ static void genpd_recalc_cpu_exit_latency(struct generic_pm_domain *genpd)
genpd->cpuidle_data->idle_state->exit_latency = usecs64;
}
+static int genpd_power_on(struct generic_pm_domain *genpd)
+{
+ ktime_t time_start;
+ s64 elapsed_ns;
+ int ret;
+
+ if (!genpd->power_on)
+ return 0;
+
+ time_start = ktime_get();
+ ret = genpd->power_on(genpd);
+ if (ret)
+ return ret;
+
+ elapsed_ns = ktime_to_ns(ktime_sub(ktime_get(), time_start));
+ if (elapsed_ns <= genpd->power_on_latency_ns)
+ return ret;
+
+ genpd->power_on_latency_ns = elapsed_ns;
+ genpd->max_off_time_changed = true;
+ genpd_recalc_cpu_exit_latency(genpd);
+ pr_warn("%s: Power-%s latency exceeded, new value %lld ns\n",
+ genpd->name, "on", elapsed_ns);
+
+ return ret;
+}
+
+static int genpd_power_off(struct generic_pm_domain *genpd)
+{
+ ktime_t time_start;
+ s64 elapsed_ns;
+ int ret;
+
+ if (!genpd->power_off)
+ return 0;
+
+ time_start = ktime_get();
+ ret = genpd->power_off(genpd);
+ if (ret == -EBUSY)
+ return ret;
+
+ elapsed_ns = ktime_to_ns(ktime_sub(ktime_get(), time_start));
+ if (elapsed_ns <= genpd->power_off_latency_ns)
+ return ret;
+
+ genpd->power_off_latency_ns = elapsed_ns;
+ genpd->max_off_time_changed = true;
+ pr_warn("%s: Power-%s latency exceeded, new value %lld ns\n",
+ genpd->name, "off", elapsed_ns);
+
+ return ret;
+}
+
/**
* __pm_genpd_poweron - Restore power to a given PM domain and its masters.
* @genpd: PM domain to power up.
@@ -222,25 +276,9 @@ static int __pm_genpd_poweron(struct generic_pm_domain *genpd)
}
}
- if (genpd->power_on) {
- ktime_t time_start = ktime_get();
- s64 elapsed_ns;
-
- ret = genpd->power_on(genpd);
- if (ret)
- goto err;
-
- elapsed_ns = ktime_to_ns(ktime_sub(ktime_get(), time_start));
- if (elapsed_ns > genpd->power_on_latency_ns) {
- genpd->power_on_latency_ns = elapsed_ns;
- genpd->max_off_time_changed = true;
- genpd_recalc_cpu_exit_latency(genpd);
- if (genpd->name)
- pr_warning("%s: Power-on latency exceeded, "
- "new value %lld ns\n", genpd->name,
- elapsed_ns);
- }
- }
+ ret = genpd_power_on(genpd);
+ if (ret)
+ goto err;
out:
genpd_set_active(genpd);
@@ -280,8 +318,6 @@ int pm_genpd_name_poweron(const char *domain_name)
return genpd ? pm_genpd_poweron(genpd) : -EINVAL;
}
-#ifdef CONFIG_PM_RUNTIME
-
static int genpd_start_dev_no_timing(struct generic_pm_domain *genpd,
struct device *dev)
{
@@ -544,16 +580,11 @@ static int pm_genpd_poweroff(struct generic_pm_domain *genpd)
}
if (genpd->power_off) {
- ktime_t time_start;
- s64 elapsed_ns;
-
if (atomic_read(&genpd->sd_count) > 0) {
ret = -EBUSY;
goto out;
}
- time_start = ktime_get();
-
/*
* If sd_count > 0 at this point, one of the subdomains hasn't
* managed to call pm_genpd_poweron() for the master yet after
@@ -562,21 +593,11 @@ static int pm_genpd_poweroff(struct generic_pm_domain *genpd)
* the pm_genpd_poweron() restore power for us (this shouldn't
* happen very often).
*/
- ret = genpd->power_off(genpd);
+ ret = genpd_power_off(genpd);
if (ret == -EBUSY) {
genpd_set_active(genpd);
goto out;
}
-
- elapsed_ns = ktime_to_ns(ktime_sub(ktime_get(), time_start));
- if (elapsed_ns > genpd->power_off_latency_ns) {
- genpd->power_off_latency_ns = elapsed_ns;
- genpd->max_off_time_changed = true;
- if (genpd->name)
- pr_warning("%s: Power-off latency exceeded, "
- "new value %lld ns\n", genpd->name,
- elapsed_ns);
- }
}
genpd->status = GPD_STATE_POWER_OFF;
@@ -755,33 +776,15 @@ static int __init genpd_poweroff_unused(void)
}
late_initcall(genpd_poweroff_unused);
-#else
-
-static inline int genpd_dev_pm_qos_notifier(struct notifier_block *nb,
- unsigned long val, void *ptr)
-{
- return NOTIFY_DONE;
-}
-
-static inline void
-genpd_queue_power_off_work(struct generic_pm_domain *genpd) {}
-
-static inline void genpd_power_off_work_fn(struct work_struct *work) {}
-
-#define pm_genpd_runtime_suspend NULL
-#define pm_genpd_runtime_resume NULL
-
-#endif /* CONFIG_PM_RUNTIME */
-
#ifdef CONFIG_PM_SLEEP
/**
* pm_genpd_present - Check if the given PM domain has been initialized.
* @genpd: PM domain to check.
*/
-static bool pm_genpd_present(struct generic_pm_domain *genpd)
+static bool pm_genpd_present(const struct generic_pm_domain *genpd)
{
- struct generic_pm_domain *gpd;
+ const struct generic_pm_domain *gpd;
if (IS_ERR_OR_NULL(genpd))
return false;
@@ -822,8 +825,7 @@ static void pm_genpd_sync_poweroff(struct generic_pm_domain *genpd)
|| atomic_read(&genpd->sd_count) > 0)
return;
- if (genpd->power_off)
- genpd->power_off(genpd);
+ genpd_power_off(genpd);
genpd->status = GPD_STATE_POWER_OFF;
@@ -854,8 +856,7 @@ static void pm_genpd_sync_poweron(struct generic_pm_domain *genpd)
genpd_sd_counter_inc(link->master);
}
- if (genpd->power_on)
- genpd->power_on(genpd);
+ genpd_power_on(genpd);
genpd->status = GPD_STATE_ACTIVE;
}
@@ -1277,8 +1278,7 @@ static int pm_genpd_restore_noirq(struct device *dev)
* If the domain was off before the hibernation, make
* sure it will be off going forward.
*/
- if (genpd->power_off)
- genpd->power_off(genpd);
+ genpd_power_off(genpd);
return 0;
}
@@ -1364,7 +1364,7 @@ void pm_genpd_syscore_poweron(struct device *dev)
}
EXPORT_SYMBOL_GPL(pm_genpd_syscore_poweron);
-#else
+#else /* !CONFIG_PM_SLEEP */
#define pm_genpd_prepare NULL
#define pm_genpd_suspend NULL
@@ -1929,6 +1929,12 @@ void pm_genpd_init(struct generic_pm_domain *genpd,
genpd->domain.ops.complete = pm_genpd_complete;
genpd->dev_ops.save_state = pm_genpd_default_save_state;
genpd->dev_ops.restore_state = pm_genpd_default_restore_state;
+
+ if (genpd->flags & GENPD_FLAG_PM_CLK) {
+ genpd->dev_ops.stop = pm_clk_suspend;
+ genpd->dev_ops.start = pm_clk_resume;
+ }
+
mutex_lock(&gpd_list_lock);
list_add(&genpd->gpd_list_node, &gpd_list);
mutex_unlock(&gpd_list_lock);
@@ -2216,11 +2222,12 @@ int genpd_dev_pm_attach(struct device *dev)
}
dev->pm_domain->detach = genpd_dev_pm_detach;
+ pm_genpd_poweron(pd);
return 0;
}
EXPORT_SYMBOL_GPL(genpd_dev_pm_attach);
-#endif
+#endif /* CONFIG_PM_GENERIC_DOMAINS_OF */
/*** debugfs support ***/
@@ -2236,10 +2243,8 @@ static struct dentry *pm_genpd_debugfs_dir;
/*
* TODO: This function is a slightly modified version of rtpm_status_show
- * from sysfs.c, but dependencies between PM_GENERIC_DOMAINS and PM_RUNTIME
- * are too loose to generalize it.
+ * from sysfs.c, so generalize it.
*/
-#ifdef CONFIG_PM_RUNTIME
static void rtpm_status_str(struct seq_file *s, struct device *dev)
{
static const char * const status_lookup[] = {
@@ -2261,12 +2266,6 @@ static void rtpm_status_str(struct seq_file *s, struct device *dev)
seq_puts(s, p);
}
-#else
-static void rtpm_status_str(struct seq_file *s, struct device *dev)
-{
- seq_puts(s, "active");
-}
-#endif
static int pm_genpd_summary_one(struct seq_file *s,
struct generic_pm_domain *gpd)
diff --git a/drivers/base/power/domain_governor.c b/drivers/base/power/domain_governor.c
index d88a62e104d4..2a4154a09e4d 100644
--- a/drivers/base/power/domain_governor.c
+++ b/drivers/base/power/domain_governor.c
@@ -11,8 +11,6 @@
#include <linux/pm_qos.h>
#include <linux/hrtimer.h>
-#ifdef CONFIG_PM_RUNTIME
-
static int dev_update_qos_constraint(struct device *dev, void *data)
{
s64 *constraint_ns_p = data;
@@ -227,15 +225,6 @@ static bool always_on_power_down_ok(struct dev_pm_domain *domain)
return false;
}
-#else /* !CONFIG_PM_RUNTIME */
-
-static inline bool default_stop_ok(struct device *dev) { return false; }
-
-#define default_power_down_ok NULL
-#define always_on_power_down_ok NULL
-
-#endif /* !CONFIG_PM_RUNTIME */
-
struct dev_power_governor simple_qos_governor = {
.stop_ok = default_stop_ok,
.power_down_ok = default_power_down_ok,
diff --git a/drivers/base/power/opp.c b/drivers/base/power/opp.c
index 89ced955fafa..2d195f3a1998 100644
--- a/drivers/base/power/opp.c
+++ b/drivers/base/power/opp.c
@@ -49,11 +49,12 @@
* are protected by the dev_opp_list_lock for integrity.
* IMPORTANT: the opp nodes should be maintained in increasing
* order.
+ * @dynamic: not-created from static DT entries.
* @available: true/false - marks if this OPP as available or not
* @rate: Frequency in hertz
* @u_volt: Nominal voltage in microvolts corresponding to this OPP
* @dev_opp: points back to the device_opp struct this opp belongs to
- * @head: RCU callback head used for deferred freeing
+ * @rcu_head: RCU callback head used for deferred freeing
*
* This structure stores the OPP information for a given device.
*/
@@ -61,11 +62,12 @@ struct dev_pm_opp {
struct list_head node;
bool available;
+ bool dynamic;
unsigned long rate;
unsigned long u_volt;
struct device_opp *dev_opp;
- struct rcu_head head;
+ struct rcu_head rcu_head;
};
/**
@@ -76,7 +78,8 @@ struct dev_pm_opp {
* RCU usage: nodes are not modified in the list of device_opp,
* however addition is possible and is secured by dev_opp_list_lock
* @dev: device pointer
- * @head: notifier head to notify the OPP availability changes.
+ * @srcu_head: notifier head to notify the OPP availability changes.
+ * @rcu_head: RCU callback head used for deferred freeing
* @opp_list: list of opps
*
* This is an internal data structure maintaining the link to opps attached to
@@ -87,7 +90,8 @@ struct device_opp {
struct list_head node;
struct device *dev;
- struct srcu_notifier_head head;
+ struct srcu_notifier_head srcu_head;
+ struct rcu_head rcu_head;
struct list_head opp_list;
};
@@ -378,30 +382,8 @@ struct dev_pm_opp *dev_pm_opp_find_freq_floor(struct device *dev,
}
EXPORT_SYMBOL_GPL(dev_pm_opp_find_freq_floor);
-/**
- * dev_pm_opp_add() - Add an OPP table from a table definitions
- * @dev: device for which we do this operation
- * @freq: Frequency in Hz for this OPP
- * @u_volt: Voltage in uVolts for this OPP
- *
- * This function adds an opp definition to the opp list and returns status.
- * The opp is made available by default and it can be controlled using
- * dev_pm_opp_enable/disable functions.
- *
- * Locking: The internal device_opp and opp structures are RCU protected.
- * Hence this function internally uses RCU updater strategy with mutex locks
- * to keep the integrity of the internal data structures. Callers should ensure
- * that this function is *NOT* called under RCU protection or in contexts where
- * mutex cannot be locked.
- *
- * Return:
- * 0: On success OR
- * Duplicate OPPs (both freq and volt are same) and opp->available
- * -EEXIST: Freq are same and volt are different OR
- * Duplicate OPPs (both freq and volt are same) and !opp->available
- * -ENOMEM: Memory allocation failure
- */
-int dev_pm_opp_add(struct device *dev, unsigned long freq, unsigned long u_volt)
+static int dev_pm_opp_add_dynamic(struct device *dev, unsigned long freq,
+ unsigned long u_volt, bool dynamic)
{
struct device_opp *dev_opp = NULL;
struct dev_pm_opp *opp, *new_opp;
@@ -417,6 +399,13 @@ int dev_pm_opp_add(struct device *dev, unsigned long freq, unsigned long u_volt)
/* Hold our list modification lock here */
mutex_lock(&dev_opp_list_lock);
+ /* populate the opp table */
+ new_opp->dev_opp = dev_opp;
+ new_opp->rate = freq;
+ new_opp->u_volt = u_volt;
+ new_opp->available = true;
+ new_opp->dynamic = dynamic;
+
/* Check for existing list for 'dev' */
dev_opp = find_device_opp(dev);
if (IS_ERR(dev_opp)) {
@@ -436,19 +425,15 @@ int dev_pm_opp_add(struct device *dev, unsigned long freq, unsigned long u_volt)
}
dev_opp->dev = dev;
- srcu_init_notifier_head(&dev_opp->head);
+ srcu_init_notifier_head(&dev_opp->srcu_head);
INIT_LIST_HEAD(&dev_opp->opp_list);
/* Secure the device list modification */
list_add_rcu(&dev_opp->node, &dev_opp_list);
+ head = &dev_opp->opp_list;
+ goto list_add;
}
- /* populate the opp table */
- new_opp->dev_opp = dev_opp;
- new_opp->rate = freq;
- new_opp->u_volt = u_volt;
- new_opp->available = true;
-
/*
* Insert new OPP in order of increasing frequency
* and discard if already present
@@ -474,6 +459,7 @@ int dev_pm_opp_add(struct device *dev, unsigned long freq, unsigned long u_volt)
return ret;
}
+list_add:
list_add_rcu(&new_opp->node, head);
mutex_unlock(&dev_opp_list_lock);
@@ -481,11 +467,109 @@ int dev_pm_opp_add(struct device *dev, unsigned long freq, unsigned long u_volt)
* Notify the changes in the availability of the operable
* frequency/voltage list.
*/
- srcu_notifier_call_chain(&dev_opp->head, OPP_EVENT_ADD, new_opp);
+ srcu_notifier_call_chain(&dev_opp->srcu_head, OPP_EVENT_ADD, new_opp);
return 0;
}
+
+/**
+ * dev_pm_opp_add() - Add an OPP table from a table definitions
+ * @dev: device for which we do this operation
+ * @freq: Frequency in Hz for this OPP
+ * @u_volt: Voltage in uVolts for this OPP
+ *
+ * This function adds an opp definition to the opp list and returns status.
+ * The opp is made available by default and it can be controlled using
+ * dev_pm_opp_enable/disable functions.
+ *
+ * Locking: The internal device_opp and opp structures are RCU protected.
+ * Hence this function internally uses RCU updater strategy with mutex locks
+ * to keep the integrity of the internal data structures. Callers should ensure
+ * that this function is *NOT* called under RCU protection or in contexts where
+ * mutex cannot be locked.
+ *
+ * Return:
+ * 0: On success OR
+ * Duplicate OPPs (both freq and volt are same) and opp->available
+ * -EEXIST: Freq are same and volt are different OR
+ * Duplicate OPPs (both freq and volt are same) and !opp->available
+ * -ENOMEM: Memory allocation failure
+ */
+int dev_pm_opp_add(struct device *dev, unsigned long freq, unsigned long u_volt)
+{
+ return dev_pm_opp_add_dynamic(dev, freq, u_volt, true);
+}
EXPORT_SYMBOL_GPL(dev_pm_opp_add);
+static void kfree_opp_rcu(struct rcu_head *head)
+{
+ struct dev_pm_opp *opp = container_of(head, struct dev_pm_opp, rcu_head);
+
+ kfree_rcu(opp, rcu_head);
+}
+
+static void kfree_device_rcu(struct rcu_head *head)
+{
+ struct device_opp *device_opp = container_of(head, struct device_opp, rcu_head);
+
+ kfree(device_opp);
+}
+
+void __dev_pm_opp_remove(struct device_opp *dev_opp, struct dev_pm_opp *opp)
+{
+ /*
+ * Notify the changes in the availability of the operable
+ * frequency/voltage list.
+ */
+ srcu_notifier_call_chain(&dev_opp->srcu_head, OPP_EVENT_REMOVE, opp);
+ list_del_rcu(&opp->node);
+ call_srcu(&dev_opp->srcu_head.srcu, &opp->rcu_head, kfree_opp_rcu);
+
+ if (list_empty(&dev_opp->opp_list)) {
+ list_del_rcu(&dev_opp->node);
+ call_srcu(&dev_opp->srcu_head.srcu, &dev_opp->rcu_head,
+ kfree_device_rcu);
+ }
+}
+
+/**
+ * dev_pm_opp_remove() - Remove an OPP from OPP list
+ * @dev: device for which we do this operation
+ * @freq: OPP to remove with matching 'freq'
+ *
+ * This function removes an opp from the opp list.
+ */
+void dev_pm_opp_remove(struct device *dev, unsigned long freq)
+{
+ struct dev_pm_opp *opp;
+ struct device_opp *dev_opp;
+ bool found = false;
+
+ /* Hold our list modification lock here */
+ mutex_lock(&dev_opp_list_lock);
+
+ dev_opp = find_device_opp(dev);
+ if (IS_ERR(dev_opp))
+ goto unlock;
+
+ list_for_each_entry(opp, &dev_opp->opp_list, node) {
+ if (opp->rate == freq) {
+ found = true;
+ break;
+ }
+ }
+
+ if (!found) {
+ dev_warn(dev, "%s: Couldn't find OPP with freq: %lu\n",
+ __func__, freq);
+ goto unlock;
+ }
+
+ __dev_pm_opp_remove(dev_opp, opp);
+unlock:
+ mutex_unlock(&dev_opp_list_lock);
+}
+EXPORT_SYMBOL_GPL(dev_pm_opp_remove);
+
/**
* opp_set_availability() - helper to set the availability of an opp
* @dev: device for which we do this operation
@@ -557,14 +641,14 @@ static int opp_set_availability(struct device *dev, unsigned long freq,
list_replace_rcu(&opp->node, &new_opp->node);
mutex_unlock(&dev_opp_list_lock);
- kfree_rcu(opp, head);
+ call_srcu(&dev_opp->srcu_head.srcu, &opp->rcu_head, kfree_opp_rcu);
/* Notify the change of the OPP availability */
if (availability_req)
- srcu_notifier_call_chain(&dev_opp->head, OPP_EVENT_ENABLE,
+ srcu_notifier_call_chain(&dev_opp->srcu_head, OPP_EVENT_ENABLE,
new_opp);
else
- srcu_notifier_call_chain(&dev_opp->head, OPP_EVENT_DISABLE,
+ srcu_notifier_call_chain(&dev_opp->srcu_head, OPP_EVENT_DISABLE,
new_opp);
return 0;
@@ -629,7 +713,7 @@ struct srcu_notifier_head *dev_pm_opp_get_notifier(struct device *dev)
if (IS_ERR(dev_opp))
return ERR_CAST(dev_opp); /* matching type */
- return &dev_opp->head;
+ return &dev_opp->srcu_head;
}
#ifdef CONFIG_OF
@@ -666,7 +750,7 @@ int of_init_opp_table(struct device *dev)
unsigned long freq = be32_to_cpup(val++) * 1000;
unsigned long volt = be32_to_cpup(val++);
- if (dev_pm_opp_add(dev, freq, volt))
+ if (dev_pm_opp_add_dynamic(dev, freq, volt, false))
dev_warn(dev, "%s: Failed to add OPP %ld\n",
__func__, freq);
nr -= 2;
@@ -675,4 +759,34 @@ int of_init_opp_table(struct device *dev)
return 0;
}
EXPORT_SYMBOL_GPL(of_init_opp_table);
+
+/**
+ * of_free_opp_table() - Free OPP table entries created from static DT entries
+ * @dev: device pointer used to lookup device OPPs.
+ *
+ * Free OPPs created using static entries present in DT.
+ */
+void of_free_opp_table(struct device *dev)
+{
+ struct device_opp *dev_opp = find_device_opp(dev);
+ struct dev_pm_opp *opp, *tmp;
+
+ /* Check for existing list for 'dev' */
+ dev_opp = find_device_opp(dev);
+ if (WARN(IS_ERR(dev_opp), "%s: dev_opp: %ld\n", dev_name(dev),
+ PTR_ERR(dev_opp)))
+ return;
+
+ /* Hold our list modification lock here */
+ mutex_lock(&dev_opp_list_lock);
+
+ /* Free static OPPs */
+ list_for_each_entry_safe(opp, tmp, &dev_opp->opp_list, node) {
+ if (!opp->dynamic)
+ __dev_pm_opp_remove(dev_opp, opp);
+ }
+
+ mutex_unlock(&dev_opp_list_lock);
+}
+EXPORT_SYMBOL_GPL(of_free_opp_table);
#endif
diff --git a/drivers/base/power/power.h b/drivers/base/power/power.h
index a21223d95926..b6b8a273c5da 100644
--- a/drivers/base/power/power.h
+++ b/drivers/base/power/power.h
@@ -9,7 +9,7 @@ static inline void device_pm_init_common(struct device *dev)
}
}
-#ifdef CONFIG_PM_RUNTIME
+#ifdef CONFIG_PM
static inline void pm_runtime_early_init(struct device *dev)
{
@@ -20,7 +20,21 @@ static inline void pm_runtime_early_init(struct device *dev)
extern void pm_runtime_init(struct device *dev);
extern void pm_runtime_remove(struct device *dev);
-#else /* !CONFIG_PM_RUNTIME */
+/*
+ * sysfs.c
+ */
+
+extern int dpm_sysfs_add(struct device *dev);
+extern void dpm_sysfs_remove(struct device *dev);
+extern void rpm_sysfs_remove(struct device *dev);
+extern int wakeup_sysfs_add(struct device *dev);
+extern void wakeup_sysfs_remove(struct device *dev);
+extern int pm_qos_sysfs_add_resume_latency(struct device *dev);
+extern void pm_qos_sysfs_remove_resume_latency(struct device *dev);
+extern int pm_qos_sysfs_add_flags(struct device *dev);
+extern void pm_qos_sysfs_remove_flags(struct device *dev);
+
+#else /* CONFIG_PM */
static inline void pm_runtime_early_init(struct device *dev)
{
@@ -30,7 +44,15 @@ static inline void pm_runtime_early_init(struct device *dev)
static inline void pm_runtime_init(struct device *dev) {}
static inline void pm_runtime_remove(struct device *dev) {}
-#endif /* !CONFIG_PM_RUNTIME */
+static inline int dpm_sysfs_add(struct device *dev) { return 0; }
+static inline void dpm_sysfs_remove(struct device *dev) {}
+static inline void rpm_sysfs_remove(struct device *dev) {}
+static inline int wakeup_sysfs_add(struct device *dev) { return 0; }
+static inline void wakeup_sysfs_remove(struct device *dev) {}
+static inline int pm_qos_sysfs_add(struct device *dev) { return 0; }
+static inline void pm_qos_sysfs_remove(struct device *dev) {}
+
+#endif
#ifdef CONFIG_PM_SLEEP
@@ -77,31 +99,3 @@ static inline void device_pm_init(struct device *dev)
device_pm_sleep_init(dev);
pm_runtime_init(dev);
}
-
-#ifdef CONFIG_PM
-
-/*
- * sysfs.c
- */
-
-extern int dpm_sysfs_add(struct device *dev);
-extern void dpm_sysfs_remove(struct device *dev);
-extern void rpm_sysfs_remove(struct device *dev);
-extern int wakeup_sysfs_add(struct device *dev);
-extern void wakeup_sysfs_remove(struct device *dev);
-extern int pm_qos_sysfs_add_resume_latency(struct device *dev);
-extern void pm_qos_sysfs_remove_resume_latency(struct device *dev);
-extern int pm_qos_sysfs_add_flags(struct device *dev);
-extern void pm_qos_sysfs_remove_flags(struct device *dev);
-
-#else /* CONFIG_PM */
-
-static inline int dpm_sysfs_add(struct device *dev) { return 0; }
-static inline void dpm_sysfs_remove(struct device *dev) {}
-static inline void rpm_sysfs_remove(struct device *dev) {}
-static inline int wakeup_sysfs_add(struct device *dev) { return 0; }
-static inline void wakeup_sysfs_remove(struct device *dev) {}
-static inline int pm_qos_sysfs_add(struct device *dev) { return 0; }
-static inline void pm_qos_sysfs_remove(struct device *dev) {}
-
-#endif
diff --git a/drivers/base/power/qos.c b/drivers/base/power/qos.c
index 36b9eb4862cb..a8fe4c1a8d07 100644
--- a/drivers/base/power/qos.c
+++ b/drivers/base/power/qos.c
@@ -599,7 +599,6 @@ int dev_pm_qos_add_ancestor_request(struct device *dev,
}
EXPORT_SYMBOL_GPL(dev_pm_qos_add_ancestor_request);
-#ifdef CONFIG_PM_RUNTIME
static void __dev_pm_qos_drop_user_request(struct device *dev,
enum dev_pm_qos_req_type type)
{
@@ -880,7 +879,3 @@ int dev_pm_qos_update_user_latency_tolerance(struct device *dev, s32 val)
mutex_unlock(&dev_pm_qos_mtx);
return ret;
}
-#else /* !CONFIG_PM_RUNTIME */
-static void __dev_pm_qos_hide_latency_limit(struct device *dev) {}
-static void __dev_pm_qos_hide_flags(struct device *dev) {}
-#endif /* CONFIG_PM_RUNTIME */
diff --git a/drivers/base/power/runtime.c b/drivers/base/power/runtime.c
index 67c7938e430b..5070c4fe8542 100644
--- a/drivers/base/power/runtime.c
+++ b/drivers/base/power/runtime.c
@@ -13,43 +13,38 @@
#include <trace/events/rpm.h>
#include "power.h"
-#define RPM_GET_CALLBACK(dev, cb) \
-({ \
- int (*__rpm_cb)(struct device *__d); \
- \
- if (dev->pm_domain) \
- __rpm_cb = dev->pm_domain->ops.cb; \
- else if (dev->type && dev->type->pm) \
- __rpm_cb = dev->type->pm->cb; \
- else if (dev->class && dev->class->pm) \
- __rpm_cb = dev->class->pm->cb; \
- else if (dev->bus && dev->bus->pm) \
- __rpm_cb = dev->bus->pm->cb; \
- else \
- __rpm_cb = NULL; \
- \
- if (!__rpm_cb && dev->driver && dev->driver->pm) \
- __rpm_cb = dev->driver->pm->cb; \
- \
- __rpm_cb; \
-})
-
-static int (*rpm_get_suspend_cb(struct device *dev))(struct device *)
-{
- return RPM_GET_CALLBACK(dev, runtime_suspend);
-}
+typedef int (*pm_callback_t)(struct device *);
-static int (*rpm_get_resume_cb(struct device *dev))(struct device *)
+static pm_callback_t __rpm_get_callback(struct device *dev, size_t cb_offset)
{
- return RPM_GET_CALLBACK(dev, runtime_resume);
-}
+ pm_callback_t cb;
+ const struct dev_pm_ops *ops;
+
+ if (dev->pm_domain)
+ ops = &dev->pm_domain->ops;
+ else if (dev->type && dev->type->pm)
+ ops = dev->type->pm;
+ else if (dev->class && dev->class->pm)
+ ops = dev->class->pm;
+ else if (dev->bus && dev->bus->pm)
+ ops = dev->bus->pm;
+ else
+ ops = NULL;
-#ifdef CONFIG_PM_RUNTIME
-static int (*rpm_get_idle_cb(struct device *dev))(struct device *)
-{
- return RPM_GET_CALLBACK(dev, runtime_idle);
+ if (ops)
+ cb = *(pm_callback_t *)((void *)ops + cb_offset);
+ else
+ cb = NULL;
+
+ if (!cb && dev->driver && dev->driver->pm)
+ cb = *(pm_callback_t *)((void *)dev->driver->pm + cb_offset);
+
+ return cb;
}
+#define RPM_GET_CALLBACK(dev, callback) \
+ __rpm_get_callback(dev, offsetof(struct dev_pm_ops, callback))
+
static int rpm_resume(struct device *dev, int rpmflags);
static int rpm_suspend(struct device *dev, int rpmflags);
@@ -347,7 +342,7 @@ static int rpm_idle(struct device *dev, int rpmflags)
dev->power.idle_notification = true;
- callback = rpm_get_idle_cb(dev);
+ callback = RPM_GET_CALLBACK(dev, runtime_idle);
if (callback)
retval = __rpm_callback(callback, dev);
@@ -517,7 +512,7 @@ static int rpm_suspend(struct device *dev, int rpmflags)
__update_runtime_status(dev, RPM_SUSPENDING);
- callback = rpm_get_suspend_cb(dev);
+ callback = RPM_GET_CALLBACK(dev, runtime_suspend);
retval = rpm_callback(callback, dev);
if (retval)
@@ -737,7 +732,7 @@ static int rpm_resume(struct device *dev, int rpmflags)
__update_runtime_status(dev, RPM_RESUMING);
- callback = rpm_get_resume_cb(dev);
+ callback = RPM_GET_CALLBACK(dev, runtime_resume);
retval = rpm_callback(callback, dev);
if (retval) {
@@ -1402,7 +1397,6 @@ void pm_runtime_remove(struct device *dev)
if (dev->power.irq_safe && dev->parent)
pm_runtime_put(dev->parent);
}
-#endif
/**
* pm_runtime_force_suspend - Force a device into suspend state if needed.
@@ -1422,16 +1416,10 @@ int pm_runtime_force_suspend(struct device *dev)
int ret = 0;
pm_runtime_disable(dev);
-
- /*
- * Note that pm_runtime_status_suspended() returns false while
- * !CONFIG_PM_RUNTIME, which means the device will be put into low
- * power state.
- */
if (pm_runtime_status_suspended(dev))
return 0;
- callback = rpm_get_suspend_cb(dev);
+ callback = RPM_GET_CALLBACK(dev, runtime_suspend);
if (!callback) {
ret = -ENOSYS;
@@ -1467,7 +1455,7 @@ int pm_runtime_force_resume(struct device *dev)
int (*callback)(struct device *);
int ret = 0;
- callback = rpm_get_resume_cb(dev);
+ callback = RPM_GET_CALLBACK(dev, runtime_resume);
if (!callback) {
ret = -ENOSYS;
diff --git a/drivers/base/power/sysfs.c b/drivers/base/power/sysfs.c
index a9d26ed11bf4..d2be3f9c211c 100644
--- a/drivers/base/power/sysfs.c
+++ b/drivers/base/power/sysfs.c
@@ -95,7 +95,6 @@
const char power_group_name[] = "power";
EXPORT_SYMBOL_GPL(power_group_name);
-#ifdef CONFIG_PM_RUNTIME
static const char ctrl_auto[] = "auto";
static const char ctrl_on[] = "on";
@@ -330,7 +329,6 @@ static ssize_t pm_qos_remote_wakeup_store(struct device *dev,
static DEVICE_ATTR(pm_qos_remote_wakeup, 0644,
pm_qos_remote_wakeup_show, pm_qos_remote_wakeup_store);
-#endif /* CONFIG_PM_RUNTIME */
#ifdef CONFIG_PM_SLEEP
static const char _enabled[] = "enabled";
@@ -531,8 +529,6 @@ static DEVICE_ATTR(wakeup_prevent_sleep_time_ms, 0444,
#endif /* CONFIG_PM_SLEEP */
#ifdef CONFIG_PM_ADVANCED_DEBUG
-#ifdef CONFIG_PM_RUNTIME
-
static ssize_t rtpm_usagecount_show(struct device *dev,
struct device_attribute *attr, char *buf)
{
@@ -562,10 +558,7 @@ static DEVICE_ATTR(runtime_usage, 0444, rtpm_usagecount_show, NULL);
static DEVICE_ATTR(runtime_active_kids, 0444, rtpm_children_show, NULL);
static DEVICE_ATTR(runtime_enabled, 0444, rtpm_enabled_show, NULL);
-#endif
-
#ifdef CONFIG_PM_SLEEP
-
static ssize_t async_show(struct device *dev, struct device_attribute *attr,
char *buf)
{
@@ -595,7 +588,7 @@ static ssize_t async_store(struct device *dev, struct device_attribute *attr,
static DEVICE_ATTR(async, 0644, async_show, async_store);
-#endif
+#endif /* CONFIG_PM_SLEEP */
#endif /* CONFIG_PM_ADVANCED_DEBUG */
static struct attribute *power_attrs[] = {
@@ -603,12 +596,10 @@ static struct attribute *power_attrs[] = {
#ifdef CONFIG_PM_SLEEP
&dev_attr_async.attr,
#endif
-#ifdef CONFIG_PM_RUNTIME
&dev_attr_runtime_status.attr,
&dev_attr_runtime_usage.attr,
&dev_attr_runtime_active_kids.attr,
&dev_attr_runtime_enabled.attr,
-#endif
#endif /* CONFIG_PM_ADVANCED_DEBUG */
NULL,
};
@@ -640,7 +631,6 @@ static struct attribute_group pm_wakeup_attr_group = {
};
static struct attribute *runtime_attrs[] = {
-#ifdef CONFIG_PM_RUNTIME
#ifndef CONFIG_PM_ADVANCED_DEBUG
&dev_attr_runtime_status.attr,
#endif
@@ -648,7 +638,6 @@ static struct attribute *runtime_attrs[] = {
&dev_attr_runtime_suspended_time.attr,
&dev_attr_runtime_active_time.attr,
&dev_attr_autosuspend_delay_ms.attr,
-#endif /* CONFIG_PM_RUNTIME */
NULL,
};
static struct attribute_group pm_runtime_attr_group = {
@@ -657,9 +646,7 @@ static struct attribute_group pm_runtime_attr_group = {
};
static struct attribute *pm_qos_resume_latency_attrs[] = {
-#ifdef CONFIG_PM_RUNTIME
&dev_attr_pm_qos_resume_latency_us.attr,
-#endif /* CONFIG_PM_RUNTIME */
NULL,
};
static struct attribute_group pm_qos_resume_latency_attr_group = {
@@ -668,9 +655,7 @@ static struct attribute_group pm_qos_resume_latency_attr_group = {
};
static struct attribute *pm_qos_latency_tolerance_attrs[] = {
-#ifdef CONFIG_PM_RUNTIME
&dev_attr_pm_qos_latency_tolerance_us.attr,
-#endif /* CONFIG_PM_RUNTIME */
NULL,
};
static struct attribute_group pm_qos_latency_tolerance_attr_group = {
@@ -679,10 +664,8 @@ static struct attribute_group pm_qos_latency_tolerance_attr_group = {
};
static struct attribute *pm_qos_flags_attrs[] = {
-#ifdef CONFIG_PM_RUNTIME
&dev_attr_pm_qos_no_power_off.attr,
&dev_attr_pm_qos_remote_wakeup.attr,
-#endif /* CONFIG_PM_RUNTIME */
NULL,
};
static struct attribute_group pm_qos_flags_attr_group = {
diff --git a/drivers/base/property.c b/drivers/base/property.c
new file mode 100644
index 000000000000..c45845874d4f
--- /dev/null
+++ b/drivers/base/property.c
@@ -0,0 +1,431 @@
+/*
+ * property.c - Unified device property interface.
+ *
+ * Copyright (C) 2014, Intel Corporation
+ * Authors: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
+ * Mika Westerberg <mika.westerberg@linux.intel.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/property.h>
+#include <linux/export.h>
+#include <linux/acpi.h>
+#include <linux/of.h>
+
+/**
+ * device_property_present - check if a property of a device is present
+ * @dev: Device whose property is being checked
+ * @propname: Name of the property
+ *
+ * Check if property @propname is present in the device firmware description.
+ */
+bool device_property_present(struct device *dev, const char *propname)
+{
+ if (IS_ENABLED(CONFIG_OF) && dev->of_node)
+ return of_property_read_bool(dev->of_node, propname);
+
+ return !acpi_dev_prop_get(ACPI_COMPANION(dev), propname, NULL);
+}
+EXPORT_SYMBOL_GPL(device_property_present);
+
+/**
+ * fwnode_property_present - check if a property of a firmware node is present
+ * @fwnode: Firmware node whose property to check
+ * @propname: Name of the property
+ */
+bool fwnode_property_present(struct fwnode_handle *fwnode, const char *propname)
+{
+ if (is_of_node(fwnode))
+ return of_property_read_bool(of_node(fwnode), propname);
+ else if (is_acpi_node(fwnode))
+ return !acpi_dev_prop_get(acpi_node(fwnode), propname, NULL);
+
+ return false;
+}
+EXPORT_SYMBOL_GPL(fwnode_property_present);
+
+#define OF_DEV_PROP_READ_ARRAY(node, propname, type, val, nval) \
+ (val) ? of_property_read_##type##_array((node), (propname), (val), (nval)) \
+ : of_property_count_elems_of_size((node), (propname), sizeof(type))
+
+#define DEV_PROP_READ_ARRAY(_dev_, _propname_, _type_, _proptype_, _val_, _nval_) \
+ IS_ENABLED(CONFIG_OF) && _dev_->of_node ? \
+ (OF_DEV_PROP_READ_ARRAY(_dev_->of_node, _propname_, _type_, \
+ _val_, _nval_)) : \
+ acpi_dev_prop_read(ACPI_COMPANION(_dev_), _propname_, \
+ _proptype_, _val_, _nval_)
+
+/**
+ * device_property_read_u8_array - return a u8 array property of a device
+ * @dev: Device to get the property of
+ * @propname: Name of the property
+ * @val: The values are stored here
+ * @nval: Size of the @val array
+ *
+ * Function reads an array of u8 properties with @propname from the device
+ * firmware description and stores them to @val if found.
+ *
+ * Return: %0 if the property was found (success),
+ * %-EINVAL if given arguments are not valid,
+ * %-ENODATA if the property does not have a value,
+ * %-EPROTO if the property is not an array of numbers,
+ * %-EOVERFLOW if the size of the property is not as expected.
+ */
+int device_property_read_u8_array(struct device *dev, const char *propname,
+ u8 *val, size_t nval)
+{
+ return DEV_PROP_READ_ARRAY(dev, propname, u8, DEV_PROP_U8, val, nval);
+}
+EXPORT_SYMBOL_GPL(device_property_read_u8_array);
+
+/**
+ * device_property_read_u16_array - return a u16 array property of a device
+ * @dev: Device to get the property of
+ * @propname: Name of the property
+ * @val: The values are stored here
+ * @nval: Size of the @val array
+ *
+ * Function reads an array of u16 properties with @propname from the device
+ * firmware description and stores them to @val if found.
+ *
+ * Return: %0 if the property was found (success),
+ * %-EINVAL if given arguments are not valid,
+ * %-ENODATA if the property does not have a value,
+ * %-EPROTO if the property is not an array of numbers,
+ * %-EOVERFLOW if the size of the property is not as expected.
+ */
+int device_property_read_u16_array(struct device *dev, const char *propname,
+ u16 *val, size_t nval)
+{
+ return DEV_PROP_READ_ARRAY(dev, propname, u16, DEV_PROP_U16, val, nval);
+}
+EXPORT_SYMBOL_GPL(device_property_read_u16_array);
+
+/**
+ * device_property_read_u32_array - return a u32 array property of a device
+ * @dev: Device to get the property of
+ * @propname: Name of the property
+ * @val: The values are stored here
+ * @nval: Size of the @val array
+ *
+ * Function reads an array of u32 properties with @propname from the device
+ * firmware description and stores them to @val if found.
+ *
+ * Return: %0 if the property was found (success),
+ * %-EINVAL if given arguments are not valid,
+ * %-ENODATA if the property does not have a value,
+ * %-EPROTO if the property is not an array of numbers,
+ * %-EOVERFLOW if the size of the property is not as expected.
+ */
+int device_property_read_u32_array(struct device *dev, const char *propname,
+ u32 *val, size_t nval)
+{
+ return DEV_PROP_READ_ARRAY(dev, propname, u32, DEV_PROP_U32, val, nval);
+}
+EXPORT_SYMBOL_GPL(device_property_read_u32_array);
+
+/**
+ * device_property_read_u64_array - return a u64 array property of a device
+ * @dev: Device to get the property of
+ * @propname: Name of the property
+ * @val: The values are stored here
+ * @nval: Size of the @val array
+ *
+ * Function reads an array of u64 properties with @propname from the device
+ * firmware description and stores them to @val if found.
+ *
+ * Return: %0 if the property was found (success),
+ * %-EINVAL if given arguments are not valid,
+ * %-ENODATA if the property does not have a value,
+ * %-EPROTO if the property is not an array of numbers,
+ * %-EOVERFLOW if the size of the property is not as expected.
+ */
+int device_property_read_u64_array(struct device *dev, const char *propname,
+ u64 *val, size_t nval)
+{
+ return DEV_PROP_READ_ARRAY(dev, propname, u64, DEV_PROP_U64, val, nval);
+}
+EXPORT_SYMBOL_GPL(device_property_read_u64_array);
+
+/**
+ * device_property_read_string_array - return a string array property of device
+ * @dev: Device to get the property of
+ * @propname: Name of the property
+ * @val: The values are stored here
+ * @nval: Size of the @val array
+ *
+ * Function reads an array of string properties with @propname from the device
+ * firmware description and stores them to @val if found.
+ *
+ * Return: %0 if the property was found (success),
+ * %-EINVAL if given arguments are not valid,
+ * %-ENODATA if the property does not have a value,
+ * %-EPROTO or %-EILSEQ if the property is not an array of strings,
+ * %-EOVERFLOW if the size of the property is not as expected.
+ */
+int device_property_read_string_array(struct device *dev, const char *propname,
+ const char **val, size_t nval)
+{
+ return IS_ENABLED(CONFIG_OF) && dev->of_node ?
+ of_property_read_string_array(dev->of_node, propname, val, nval) :
+ acpi_dev_prop_read(ACPI_COMPANION(dev), propname,
+ DEV_PROP_STRING, val, nval);
+}
+EXPORT_SYMBOL_GPL(device_property_read_string_array);
+
+/**
+ * device_property_read_string - return a string property of a device
+ * @dev: Device to get the property of
+ * @propname: Name of the property
+ * @val: The value is stored here
+ *
+ * Function reads property @propname from the device firmware description and
+ * stores the value into @val if found. The value is checked to be a string.
+ *
+ * Return: %0 if the property was found (success),
+ * %-EINVAL if given arguments are not valid,
+ * %-ENODATA if the property does not have a value,
+ * %-EPROTO or %-EILSEQ if the property type is not a string.
+ */
+int device_property_read_string(struct device *dev, const char *propname,
+ const char **val)
+{
+ return IS_ENABLED(CONFIG_OF) && dev->of_node ?
+ of_property_read_string(dev->of_node, propname, val) :
+ acpi_dev_prop_read(ACPI_COMPANION(dev), propname,
+ DEV_PROP_STRING, val, 1);
+}
+EXPORT_SYMBOL_GPL(device_property_read_string);
+
+#define FWNODE_PROP_READ_ARRAY(_fwnode_, _propname_, _type_, _proptype_, _val_, _nval_) \
+({ \
+ int _ret_; \
+ if (is_of_node(_fwnode_)) \
+ _ret_ = OF_DEV_PROP_READ_ARRAY(of_node(_fwnode_), _propname_, \
+ _type_, _val_, _nval_); \
+ else if (is_acpi_node(_fwnode_)) \
+ _ret_ = acpi_dev_prop_read(acpi_node(_fwnode_), _propname_, \
+ _proptype_, _val_, _nval_); \
+ else \
+ _ret_ = -ENXIO; \
+ _ret_; \
+})
+
+/**
+ * fwnode_property_read_u8_array - return a u8 array property of firmware node
+ * @fwnode: Firmware node to get the property of
+ * @propname: Name of the property
+ * @val: The values are stored here
+ * @nval: Size of the @val array
+ *
+ * Read an array of u8 properties with @propname from @fwnode and stores them to
+ * @val if found.
+ *
+ * Return: %0 if the property was found (success),
+ * %-EINVAL if given arguments are not valid,
+ * %-ENODATA if the property does not have a value,
+ * %-EPROTO if the property is not an array of numbers,
+ * %-EOVERFLOW if the size of the property is not as expected,
+ * %-ENXIO if no suitable firmware interface is present.
+ */
+int fwnode_property_read_u8_array(struct fwnode_handle *fwnode,
+ const char *propname, u8 *val, size_t nval)
+{
+ return FWNODE_PROP_READ_ARRAY(fwnode, propname, u8, DEV_PROP_U8,
+ val, nval);
+}
+EXPORT_SYMBOL_GPL(fwnode_property_read_u8_array);
+
+/**
+ * fwnode_property_read_u16_array - return a u16 array property of firmware node
+ * @fwnode: Firmware node to get the property of
+ * @propname: Name of the property
+ * @val: The values are stored here
+ * @nval: Size of the @val array
+ *
+ * Read an array of u16 properties with @propname from @fwnode and store them to
+ * @val if found.
+ *
+ * Return: %0 if the property was found (success),
+ * %-EINVAL if given arguments are not valid,
+ * %-ENODATA if the property does not have a value,
+ * %-EPROTO if the property is not an array of numbers,
+ * %-EOVERFLOW if the size of the property is not as expected,
+ * %-ENXIO if no suitable firmware interface is present.
+ */
+int fwnode_property_read_u16_array(struct fwnode_handle *fwnode,
+ const char *propname, u16 *val, size_t nval)
+{
+ return FWNODE_PROP_READ_ARRAY(fwnode, propname, u16, DEV_PROP_U16,
+ val, nval);
+}
+EXPORT_SYMBOL_GPL(fwnode_property_read_u16_array);
+
+/**
+ * fwnode_property_read_u32_array - return a u32 array property of firmware node
+ * @fwnode: Firmware node to get the property of
+ * @propname: Name of the property
+ * @val: The values are stored here
+ * @nval: Size of the @val array
+ *
+ * Read an array of u32 properties with @propname from @fwnode store them to
+ * @val if found.
+ *
+ * Return: %0 if the property was found (success),
+ * %-EINVAL if given arguments are not valid,
+ * %-ENODATA if the property does not have a value,
+ * %-EPROTO if the property is not an array of numbers,
+ * %-EOVERFLOW if the size of the property is not as expected,
+ * %-ENXIO if no suitable firmware interface is present.
+ */
+int fwnode_property_read_u32_array(struct fwnode_handle *fwnode,
+ const char *propname, u32 *val, size_t nval)
+{
+ return FWNODE_PROP_READ_ARRAY(fwnode, propname, u32, DEV_PROP_U32,
+ val, nval);
+}
+EXPORT_SYMBOL_GPL(fwnode_property_read_u32_array);
+
+/**
+ * fwnode_property_read_u64_array - return a u64 array property firmware node
+ * @fwnode: Firmware node to get the property of
+ * @propname: Name of the property
+ * @val: The values are stored here
+ * @nval: Size of the @val array
+ *
+ * Read an array of u64 properties with @propname from @fwnode and store them to
+ * @val if found.
+ *
+ * Return: %0 if the property was found (success),
+ * %-EINVAL if given arguments are not valid,
+ * %-ENODATA if the property does not have a value,
+ * %-EPROTO if the property is not an array of numbers,
+ * %-EOVERFLOW if the size of the property is not as expected,
+ * %-ENXIO if no suitable firmware interface is present.
+ */
+int fwnode_property_read_u64_array(struct fwnode_handle *fwnode,
+ const char *propname, u64 *val, size_t nval)
+{
+ return FWNODE_PROP_READ_ARRAY(fwnode, propname, u64, DEV_PROP_U64,
+ val, nval);
+}
+EXPORT_SYMBOL_GPL(fwnode_property_read_u64_array);
+
+/**
+ * fwnode_property_read_string_array - return string array property of a node
+ * @fwnode: Firmware node to get the property of
+ * @propname: Name of the property
+ * @val: The values are stored here
+ * @nval: Size of the @val array
+ *
+ * Read an string list property @propname from the given firmware node and store
+ * them to @val if found.
+ *
+ * Return: %0 if the property was found (success),
+ * %-EINVAL if given arguments are not valid,
+ * %-ENODATA if the property does not have a value,
+ * %-EPROTO if the property is not an array of strings,
+ * %-EOVERFLOW if the size of the property is not as expected,
+ * %-ENXIO if no suitable firmware interface is present.
+ */
+int fwnode_property_read_string_array(struct fwnode_handle *fwnode,
+ const char *propname, const char **val,
+ size_t nval)
+{
+ if (is_of_node(fwnode))
+ return of_property_read_string_array(of_node(fwnode), propname,
+ val, nval);
+ else if (is_acpi_node(fwnode))
+ return acpi_dev_prop_read(acpi_node(fwnode), propname,
+ DEV_PROP_STRING, val, nval);
+
+ return -ENXIO;
+}
+EXPORT_SYMBOL_GPL(fwnode_property_read_string_array);
+
+/**
+ * fwnode_property_read_string - return a string property of a firmware node
+ * @fwnode: Firmware node to get the property of
+ * @propname: Name of the property
+ * @val: The value is stored here
+ *
+ * Read property @propname from the given firmware node and store the value into
+ * @val if found. The value is checked to be a string.
+ *
+ * Return: %0 if the property was found (success),
+ * %-EINVAL if given arguments are not valid,
+ * %-ENODATA if the property does not have a value,
+ * %-EPROTO or %-EILSEQ if the property is not a string,
+ * %-ENXIO if no suitable firmware interface is present.
+ */
+int fwnode_property_read_string(struct fwnode_handle *fwnode,
+ const char *propname, const char **val)
+{
+ if (is_of_node(fwnode))
+ return of_property_read_string(of_node(fwnode),propname, val);
+ else if (is_acpi_node(fwnode))
+ return acpi_dev_prop_read(acpi_node(fwnode), propname,
+ DEV_PROP_STRING, val, 1);
+
+ return -ENXIO;
+}
+EXPORT_SYMBOL_GPL(fwnode_property_read_string);
+
+/**
+ * device_get_next_child_node - Return the next child node handle for a device
+ * @dev: Device to find the next child node for.
+ * @child: Handle to one of the device's child nodes or a null handle.
+ */
+struct fwnode_handle *device_get_next_child_node(struct device *dev,
+ struct fwnode_handle *child)
+{
+ if (IS_ENABLED(CONFIG_OF) && dev->of_node) {
+ struct device_node *node;
+
+ node = of_get_next_available_child(dev->of_node, of_node(child));
+ if (node)
+ return &node->fwnode;
+ } else if (IS_ENABLED(CONFIG_ACPI)) {
+ struct acpi_device *node;
+
+ node = acpi_get_next_child(dev, acpi_node(child));
+ if (node)
+ return acpi_fwnode_handle(node);
+ }
+ return NULL;
+}
+EXPORT_SYMBOL_GPL(device_get_next_child_node);
+
+/**
+ * fwnode_handle_put - Drop reference to a device node
+ * @fwnode: Pointer to the device node to drop the reference to.
+ *
+ * This has to be used when terminating device_for_each_child_node() iteration
+ * with break or return to prevent stale device node references from being left
+ * behind.
+ */
+void fwnode_handle_put(struct fwnode_handle *fwnode)
+{
+ if (is_of_node(fwnode))
+ of_node_put(of_node(fwnode));
+}
+EXPORT_SYMBOL_GPL(fwnode_handle_put);
+
+/**
+ * device_get_child_node_count - return the number of child nodes for device
+ * @dev: Device to cound the child nodes for
+ */
+unsigned int device_get_child_node_count(struct device *dev)
+{
+ struct fwnode_handle *child;
+ unsigned int count = 0;
+
+ device_for_each_child_node(dev, child)
+ count++;
+
+ return count;
+}
+EXPORT_SYMBOL_GPL(device_get_child_node_count);
diff --git a/drivers/char/hw_random/exynos-rng.c b/drivers/char/hw_random/exynos-rng.c
index 9f8277cc44b4..993efd7f6c7e 100644
--- a/drivers/char/hw_random/exynos-rng.c
+++ b/drivers/char/hw_random/exynos-rng.c
@@ -143,7 +143,7 @@ static int exynos_rng_remove(struct platform_device *pdev)
return 0;
}
-#if defined(CONFIG_PM_SLEEP) || defined(CONFIG_PM_RUNTIME)
+#ifdef CONFIG_PM
static int exynos_rng_runtime_suspend(struct device *dev)
{
struct platform_device *pdev = to_platform_device(dev);
diff --git a/drivers/cpufreq/Kconfig b/drivers/cpufreq/Kconfig
index 3489f8f5fada..29b2ef5a68b9 100644
--- a/drivers/cpufreq/Kconfig
+++ b/drivers/cpufreq/Kconfig
@@ -63,7 +63,6 @@ config CPU_FREQ_DEFAULT_GOV_PERFORMANCE
config CPU_FREQ_DEFAULT_GOV_POWERSAVE
bool "powersave"
- depends on EXPERT
select CPU_FREQ_GOV_POWERSAVE
help
Use the CPUFreq governor 'powersave' as default. This sets
@@ -183,6 +182,8 @@ config CPU_FREQ_GOV_CONSERVATIVE
If in doubt, say N.
+comment "CPU frequency scaling drivers"
+
config CPUFREQ_DT
tristate "Generic DT based cpufreq driver"
depends on HAVE_CLK && OF
@@ -196,19 +197,19 @@ config CPUFREQ_DT
If in doubt, say N.
-menu "x86 CPU frequency scaling drivers"
-depends on X86
+if X86
source "drivers/cpufreq/Kconfig.x86"
-endmenu
+endif
-menu "ARM CPU frequency scaling drivers"
-depends on ARM || ARM64
+if ARM || ARM64
source "drivers/cpufreq/Kconfig.arm"
-endmenu
+endif
-menu "AVR32 CPU frequency scaling drivers"
-depends on AVR32
+if PPC32 || PPC64
+source "drivers/cpufreq/Kconfig.powerpc"
+endif
+if AVR32
config AVR32_AT32AP_CPUFREQ
bool "CPU frequency driver for AT32AP"
depends on PLATFORM_AT32AP
@@ -216,12 +217,9 @@ config AVR32_AT32AP_CPUFREQ
help
This enables the CPU frequency driver for AT32AP processors.
If in doubt, say N.
+endif
-endmenu
-
-menu "CPUFreq processor drivers"
-depends on IA64
-
+if IA64
config IA64_ACPI_CPUFREQ
tristate "ACPI Processor P-States driver"
depends on ACPI_PROCESSOR
@@ -232,12 +230,9 @@ config IA64_ACPI_CPUFREQ
For details, take a look at <file:Documentation/cpu-freq/>.
If in doubt, say N.
+endif
-endmenu
-
-menu "MIPS CPUFreq processor drivers"
-depends on MIPS
-
+if MIPS
config LOONGSON2_CPUFREQ
tristate "Loongson2 CPUFreq Driver"
help
@@ -250,15 +245,18 @@ config LOONGSON2_CPUFREQ
If in doubt, say N.
-endmenu
+config LOONGSON1_CPUFREQ
+ tristate "Loongson1 CPUFreq Driver"
+ help
+ This option adds a CPUFreq driver for loongson1 processors which
+ support software configurable cpu frequency.
-menu "PowerPC CPU frequency scaling drivers"
-depends on PPC32 || PPC64
-source "drivers/cpufreq/Kconfig.powerpc"
-endmenu
+ For details, take a look at <file:Documentation/cpu-freq/>.
-menu "SPARC CPU frequency scaling drivers"
-depends on SPARC64
+ If in doubt, say N.
+endif
+
+if SPARC64
config SPARC_US3_CPUFREQ
tristate "UltraSPARC-III CPU Frequency driver"
help
@@ -276,10 +274,9 @@ config SPARC_US2E_CPUFREQ
For details, take a look at <file:Documentation/cpu-freq>.
If in doubt, say N.
-endmenu
+endif
-menu "SH CPU Frequency scaling"
-depends on SUPERH
+if SUPERH
config SH_CPU_FREQ
tristate "SuperH CPU Frequency driver"
help
@@ -293,7 +290,7 @@ config SH_CPU_FREQ
For details, take a look at <file:Documentation/cpu-freq>.
If unsure, say N.
-endmenu
+endif
endif
endmenu
diff --git a/drivers/cpufreq/Kconfig.arm b/drivers/cpufreq/Kconfig.arm
index 83a75dc84761..0f9a2c3c0e0d 100644
--- a/drivers/cpufreq/Kconfig.arm
+++ b/drivers/cpufreq/Kconfig.arm
@@ -247,3 +247,11 @@ config ARM_TEGRA_CPUFREQ
default y
help
This adds the CPUFreq driver support for TEGRA SOCs.
+
+config ARM_PXA2xx_CPUFREQ
+ tristate "Intel PXA2xx CPUfreq driver"
+ depends on PXA27x || PXA25x
+ help
+ This add the CPUFreq driver support for Intel PXA2xx SOCs.
+
+ If in doubt, say N.
diff --git a/drivers/cpufreq/Makefile b/drivers/cpufreq/Makefile
index 40c53dc1937e..b3ca7b0b2c33 100644
--- a/drivers/cpufreq/Makefile
+++ b/drivers/cpufreq/Makefile
@@ -61,8 +61,7 @@ obj-$(CONFIG_ARM_IMX6Q_CPUFREQ) += imx6q-cpufreq.o
obj-$(CONFIG_ARM_INTEGRATOR) += integrator-cpufreq.o
obj-$(CONFIG_ARM_KIRKWOOD_CPUFREQ) += kirkwood-cpufreq.o
obj-$(CONFIG_ARM_OMAP2PLUS_CPUFREQ) += omap-cpufreq.o
-obj-$(CONFIG_PXA25x) += pxa2xx-cpufreq.o
-obj-$(CONFIG_PXA27x) += pxa2xx-cpufreq.o
+obj-$(CONFIG_ARM_PXA2xx_CPUFREQ) += pxa2xx-cpufreq.o
obj-$(CONFIG_PXA3xx) += pxa3xx-cpufreq.o
obj-$(CONFIG_ARM_S3C24XX_CPUFREQ) += s3c24xx-cpufreq.o
obj-$(CONFIG_ARM_S3C24XX_CPUFREQ_DEBUGFS) += s3c24xx-cpufreq-debugfs.o
@@ -98,6 +97,7 @@ obj-$(CONFIG_CRIS_MACH_ARTPEC3) += cris-artpec3-cpufreq.o
obj-$(CONFIG_ETRAXFS) += cris-etraxfs-cpufreq.o
obj-$(CONFIG_IA64_ACPI_CPUFREQ) += ia64-acpi-cpufreq.o
obj-$(CONFIG_LOONGSON2_CPUFREQ) += loongson2_cpufreq.o
+obj-$(CONFIG_LOONGSON1_CPUFREQ) += ls1x-cpufreq.o
obj-$(CONFIG_SH_CPU_FREQ) += sh-cpufreq.o
obj-$(CONFIG_SPARC_US2E_CPUFREQ) += sparc-us2e-cpufreq.o
obj-$(CONFIG_SPARC_US3_CPUFREQ) += sparc-us3-cpufreq.o
diff --git a/drivers/cpufreq/arm_big_little.c b/drivers/cpufreq/arm_big_little.c
index a46c223c2506..e1a6ba66a7f5 100644
--- a/drivers/cpufreq/arm_big_little.c
+++ b/drivers/cpufreq/arm_big_little.c
@@ -289,6 +289,8 @@ static void _put_cluster_clk_and_freq_table(struct device *cpu_dev)
clk_put(clk[cluster]);
dev_pm_opp_free_cpufreq_table(cpu_dev, &freq_table[cluster]);
+ if (arm_bL_ops->free_opp_table)
+ arm_bL_ops->free_opp_table(cpu_dev);
dev_dbg(cpu_dev, "%s: cluster: %d\n", __func__, cluster);
}
@@ -337,7 +339,7 @@ static int _get_cluster_clk_and_freq_table(struct device *cpu_dev)
if (ret) {
dev_err(cpu_dev, "%s: failed to init cpufreq table, cpu: %d, err: %d\n",
__func__, cpu_dev->id, ret);
- goto out;
+ goto free_opp_table;
}
name[12] = cluster + '0';
@@ -354,6 +356,9 @@ static int _get_cluster_clk_and_freq_table(struct device *cpu_dev)
ret = PTR_ERR(clk[cluster]);
dev_pm_opp_free_cpufreq_table(cpu_dev, &freq_table[cluster]);
+free_opp_table:
+ if (arm_bL_ops->free_opp_table)
+ arm_bL_ops->free_opp_table(cpu_dev);
out:
dev_err(cpu_dev, "%s: Failed to get data for cluster: %d\n", __func__,
cluster);
diff --git a/drivers/cpufreq/arm_big_little.h b/drivers/cpufreq/arm_big_little.h
index 70f18fc12d4a..a211f7db9d32 100644
--- a/drivers/cpufreq/arm_big_little.h
+++ b/drivers/cpufreq/arm_big_little.h
@@ -25,13 +25,16 @@
struct cpufreq_arm_bL_ops {
char name[CPUFREQ_NAME_LEN];
- int (*get_transition_latency)(struct device *cpu_dev);
/*
* This must set opp table for cpu_dev in a similar way as done by
* of_init_opp_table().
*/
int (*init_opp_table)(struct device *cpu_dev);
+
+ /* Optional */
+ int (*get_transition_latency)(struct device *cpu_dev);
+ void (*free_opp_table)(struct device *cpu_dev);
};
int bL_cpufreq_register(struct cpufreq_arm_bL_ops *ops);
diff --git a/drivers/cpufreq/arm_big_little_dt.c b/drivers/cpufreq/arm_big_little_dt.c
index 4550f6976768..ef0b3f1324d5 100644
--- a/drivers/cpufreq/arm_big_little_dt.c
+++ b/drivers/cpufreq/arm_big_little_dt.c
@@ -82,6 +82,7 @@ static struct cpufreq_arm_bL_ops dt_bL_ops = {
.name = "dt-bl",
.get_transition_latency = dt_get_transition_latency,
.init_opp_table = dt_init_opp_table,
+ .free_opp_table = of_free_opp_table,
};
static int generic_bL_probe(struct platform_device *pdev)
diff --git a/drivers/cpufreq/cpufreq-dt.c b/drivers/cpufreq/cpufreq-dt.c
index f657c571b18e..9bc2720628a4 100644
--- a/drivers/cpufreq/cpufreq-dt.c
+++ b/drivers/cpufreq/cpufreq-dt.c
@@ -58,6 +58,8 @@ static int set_target(struct cpufreq_policy *policy, unsigned int index)
old_freq = clk_get_rate(cpu_clk) / 1000;
if (!IS_ERR(cpu_reg)) {
+ unsigned long opp_freq;
+
rcu_read_lock();
opp = dev_pm_opp_find_freq_ceil(cpu_dev, &freq_Hz);
if (IS_ERR(opp)) {
@@ -67,13 +69,16 @@ static int set_target(struct cpufreq_policy *policy, unsigned int index)
return PTR_ERR(opp);
}
volt = dev_pm_opp_get_voltage(opp);
+ opp_freq = dev_pm_opp_get_freq(opp);
rcu_read_unlock();
tol = volt * priv->voltage_tolerance / 100;
volt_old = regulator_get_voltage(cpu_reg);
+ dev_dbg(cpu_dev, "Found OPP: %ld kHz, %ld uV\n",
+ opp_freq / 1000, volt);
}
dev_dbg(cpu_dev, "%u MHz, %ld mV --> %u MHz, %ld mV\n",
- old_freq / 1000, volt_old ? volt_old / 1000 : -1,
+ old_freq / 1000, (volt_old > 0) ? volt_old / 1000 : -1,
new_freq / 1000, volt ? volt / 1000 : -1);
/* scaling up? scale voltage before frequency */
@@ -89,7 +94,7 @@ static int set_target(struct cpufreq_policy *policy, unsigned int index)
ret = clk_set_rate(cpu_clk, freq_exact);
if (ret) {
dev_err(cpu_dev, "failed to set clock rate: %d\n", ret);
- if (!IS_ERR(cpu_reg))
+ if (!IS_ERR(cpu_reg) && volt_old > 0)
regulator_set_voltage_tol(cpu_reg, volt_old, tol);
return ret;
}
@@ -181,7 +186,6 @@ static int cpufreq_init(struct cpufreq_policy *policy)
{
struct cpufreq_dt_platform_data *pd;
struct cpufreq_frequency_table *freq_table;
- struct thermal_cooling_device *cdev;
struct device_node *np;
struct private_data *priv;
struct device *cpu_dev;
@@ -210,7 +214,7 @@ static int cpufreq_init(struct cpufreq_policy *policy)
priv = kzalloc(sizeof(*priv), GFP_KERNEL);
if (!priv) {
ret = -ENOMEM;
- goto out_put_node;
+ goto out_free_opp;
}
of_property_read_u32(np, "voltage-tolerance", &priv->voltage_tolerance);
@@ -264,20 +268,6 @@ static int cpufreq_init(struct cpufreq_policy *policy)
goto out_free_priv;
}
- /*
- * For now, just loading the cooling device;
- * thermal DT code takes care of matching them.
- */
- if (of_find_property(np, "#cooling-cells", NULL)) {
- cdev = of_cpufreq_cooling_register(np, cpu_present_mask);
- if (IS_ERR(cdev))
- dev_err(cpu_dev,
- "running cpufreq without cooling device: %ld\n",
- PTR_ERR(cdev));
- else
- priv->cdev = cdev;
- }
-
priv->cpu_dev = cpu_dev;
priv->cpu_reg = cpu_reg;
policy->driver_data = priv;
@@ -287,7 +277,7 @@ static int cpufreq_init(struct cpufreq_policy *policy)
if (ret) {
dev_err(cpu_dev, "%s: invalid frequency table: %d\n", __func__,
ret);
- goto out_cooling_unregister;
+ goto out_free_cpufreq_table;
}
policy->cpuinfo.transition_latency = transition_latency;
@@ -300,12 +290,12 @@ static int cpufreq_init(struct cpufreq_policy *policy)
return 0;
-out_cooling_unregister:
- cpufreq_cooling_unregister(priv->cdev);
+out_free_cpufreq_table:
dev_pm_opp_free_cpufreq_table(cpu_dev, &freq_table);
out_free_priv:
kfree(priv);
-out_put_node:
+out_free_opp:
+ of_free_opp_table(cpu_dev);
of_node_put(np);
out_put_reg_clk:
clk_put(cpu_clk);
@@ -319,8 +309,10 @@ static int cpufreq_exit(struct cpufreq_policy *policy)
{
struct private_data *priv = policy->driver_data;
- cpufreq_cooling_unregister(priv->cdev);
+ if (priv->cdev)
+ cpufreq_cooling_unregister(priv->cdev);
dev_pm_opp_free_cpufreq_table(priv->cpu_dev, &policy->freq_table);
+ of_free_opp_table(priv->cpu_dev);
clk_put(policy->clk);
if (!IS_ERR(priv->cpu_reg))
regulator_put(priv->cpu_reg);
@@ -329,6 +321,33 @@ static int cpufreq_exit(struct cpufreq_policy *policy)
return 0;
}
+static void cpufreq_ready(struct cpufreq_policy *policy)
+{
+ struct private_data *priv = policy->driver_data;
+ struct device_node *np = of_node_get(priv->cpu_dev->of_node);
+
+ if (WARN_ON(!np))
+ return;
+
+ /*
+ * For now, just loading the cooling device;
+ * thermal DT code takes care of matching them.
+ */
+ if (of_find_property(np, "#cooling-cells", NULL)) {
+ priv->cdev = of_cpufreq_cooling_register(np,
+ policy->related_cpus);
+ if (IS_ERR(priv->cdev)) {
+ dev_err(priv->cpu_dev,
+ "running cpufreq without cooling device: %ld\n",
+ PTR_ERR(priv->cdev));
+
+ priv->cdev = NULL;
+ }
+ }
+
+ of_node_put(np);
+}
+
static struct cpufreq_driver dt_cpufreq_driver = {
.flags = CPUFREQ_STICKY | CPUFREQ_NEED_INITIAL_FREQ_CHECK,
.verify = cpufreq_generic_frequency_table_verify,
@@ -336,6 +355,7 @@ static struct cpufreq_driver dt_cpufreq_driver = {
.get = cpufreq_generic_get,
.init = cpufreq_init,
.exit = cpufreq_exit,
+ .ready = cpufreq_ready,
.name = "cpufreq-dt",
.attr = cpufreq_generic_attr,
};
diff --git a/drivers/cpufreq/cpufreq.c b/drivers/cpufreq/cpufreq.c
index 4473eba1d6b0..a09a29c312a9 100644
--- a/drivers/cpufreq/cpufreq.c
+++ b/drivers/cpufreq/cpufreq.c
@@ -535,7 +535,7 @@ static int cpufreq_set_policy(struct cpufreq_policy *policy,
static ssize_t store_##file_name \
(struct cpufreq_policy *policy, const char *buf, size_t count) \
{ \
- int ret; \
+ int ret, temp; \
struct cpufreq_policy new_policy; \
\
ret = cpufreq_get_policy(&new_policy, policy->cpu); \
@@ -546,8 +546,10 @@ static ssize_t store_##file_name \
if (ret != 1) \
return -EINVAL; \
\
+ temp = new_policy.object; \
ret = cpufreq_set_policy(policy, &new_policy); \
- policy->user_policy.object = policy->object; \
+ if (!ret) \
+ policy->user_policy.object = temp; \
\
return ret ? ret : count; \
}
@@ -898,46 +900,31 @@ static int cpufreq_add_dev_interface(struct cpufreq_policy *policy,
struct freq_attr **drv_attr;
int ret = 0;
- /* prepare interface data */
- ret = kobject_init_and_add(&policy->kobj, &ktype_cpufreq,
- &dev->kobj, "cpufreq");
- if (ret)
- return ret;
-
/* set up files for this cpu device */
drv_attr = cpufreq_driver->attr;
while ((drv_attr) && (*drv_attr)) {
ret = sysfs_create_file(&policy->kobj, &((*drv_attr)->attr));
if (ret)
- goto err_out_kobj_put;
+ return ret;
drv_attr++;
}
if (cpufreq_driver->get) {
ret = sysfs_create_file(&policy->kobj, &cpuinfo_cur_freq.attr);
if (ret)
- goto err_out_kobj_put;
+ return ret;
}
ret = sysfs_create_file(&policy->kobj, &scaling_cur_freq.attr);
if (ret)
- goto err_out_kobj_put;
+ return ret;
if (cpufreq_driver->bios_limit) {
ret = sysfs_create_file(&policy->kobj, &bios_limit.attr);
if (ret)
- goto err_out_kobj_put;
+ return ret;
}
- ret = cpufreq_add_dev_symlink(policy);
- if (ret)
- goto err_out_kobj_put;
-
- return ret;
-
-err_out_kobj_put:
- kobject_put(&policy->kobj);
- wait_for_completion(&policy->kobj_unregister);
- return ret;
+ return cpufreq_add_dev_symlink(policy);
}
static void cpufreq_init_policy(struct cpufreq_policy *policy)
@@ -1196,6 +1183,8 @@ static int __cpufreq_add_dev(struct device *dev, struct subsys_interface *sif)
goto err_set_policy_cpu;
}
+ down_write(&policy->rwsem);
+
/* related cpus should atleast have policy->cpus */
cpumask_or(policy->related_cpus, policy->related_cpus, policy->cpus);
@@ -1208,9 +1197,17 @@ static int __cpufreq_add_dev(struct device *dev, struct subsys_interface *sif)
if (!recover_policy) {
policy->user_policy.min = policy->min;
policy->user_policy.max = policy->max;
+
+ /* prepare interface data */
+ ret = kobject_init_and_add(&policy->kobj, &ktype_cpufreq,
+ &dev->kobj, "cpufreq");
+ if (ret) {
+ pr_err("%s: failed to init policy->kobj: %d\n",
+ __func__, ret);
+ goto err_init_policy_kobj;
+ }
}
- down_write(&policy->rwsem);
write_lock_irqsave(&cpufreq_driver_lock, flags);
for_each_cpu(j, policy->cpus)
per_cpu(cpufreq_cpu_data, j) = policy;
@@ -1288,8 +1285,13 @@ static int __cpufreq_add_dev(struct device *dev, struct subsys_interface *sif)
up_write(&policy->rwsem);
kobject_uevent(&policy->kobj, KOBJ_ADD);
+
up_read(&cpufreq_rwsem);
+ /* Callback for handling stuff after policy is ready */
+ if (cpufreq_driver->ready)
+ cpufreq_driver->ready(policy);
+
pr_debug("initialization complete\n");
return 0;
@@ -1301,6 +1303,11 @@ err_get_freq:
per_cpu(cpufreq_cpu_data, j) = NULL;
write_unlock_irqrestore(&cpufreq_driver_lock, flags);
+ if (!recover_policy) {
+ kobject_put(&policy->kobj);
+ wait_for_completion(&policy->kobj_unregister);
+ }
+err_init_policy_kobj:
up_write(&policy->rwsem);
if (cpufreq_driver->exit)
diff --git a/drivers/cpufreq/exynos5440-cpufreq.c b/drivers/cpufreq/exynos5440-cpufreq.c
index f33f25b483ca..27a57ed9eb2c 100644
--- a/drivers/cpufreq/exynos5440-cpufreq.c
+++ b/drivers/cpufreq/exynos5440-cpufreq.c
@@ -371,7 +371,7 @@ static int exynos_cpufreq_probe(struct platform_device *pdev)
if (ret) {
dev_err(dvfs_info->dev,
"failed to init cpufreq table: %d\n", ret);
- goto err_put_node;
+ goto err_free_opp;
}
dvfs_info->freq_count = dev_pm_opp_get_opp_count(dvfs_info->dev);
exynos_sort_descend_freq_table();
@@ -423,6 +423,8 @@ static int exynos_cpufreq_probe(struct platform_device *pdev)
err_free_table:
dev_pm_opp_free_cpufreq_table(dvfs_info->dev, &dvfs_info->freq_table);
+err_free_opp:
+ of_free_opp_table(dvfs_info->dev);
err_put_node:
of_node_put(np);
dev_err(&pdev->dev, "%s: failed initialization\n", __func__);
@@ -433,6 +435,7 @@ static int exynos_cpufreq_remove(struct platform_device *pdev)
{
cpufreq_unregister_driver(&exynos_driver);
dev_pm_opp_free_cpufreq_table(dvfs_info->dev, &dvfs_info->freq_table);
+ of_free_opp_table(dvfs_info->dev);
return 0;
}
diff --git a/drivers/cpufreq/imx6q-cpufreq.c b/drivers/cpufreq/imx6q-cpufreq.c
index c2d30765bf3d..5da1d131f770 100644
--- a/drivers/cpufreq/imx6q-cpufreq.c
+++ b/drivers/cpufreq/imx6q-cpufreq.c
@@ -31,6 +31,7 @@ static struct clk *step_clk;
static struct clk *pll2_pfd2_396m_clk;
static struct device *cpu_dev;
+static bool free_opp;
static struct cpufreq_frequency_table *freq_table;
static unsigned int transition_latency;
@@ -207,11 +208,14 @@ static int imx6q_cpufreq_probe(struct platform_device *pdev)
goto put_reg;
}
+ /* Because we have added the OPPs here, we must free them */
+ free_opp = true;
+
num = dev_pm_opp_get_opp_count(cpu_dev);
if (num < 0) {
ret = num;
dev_err(cpu_dev, "no OPP table is found: %d\n", ret);
- goto put_reg;
+ goto out_free_opp;
}
}
@@ -306,6 +310,9 @@ soc_opp_out:
free_freq_table:
dev_pm_opp_free_cpufreq_table(cpu_dev, &freq_table);
+out_free_opp:
+ if (free_opp)
+ of_free_opp_table(cpu_dev);
put_reg:
if (!IS_ERR(arm_reg))
regulator_put(arm_reg);
@@ -332,6 +339,8 @@ static int imx6q_cpufreq_remove(struct platform_device *pdev)
{
cpufreq_unregister_driver(&imx6q_cpufreq_driver);
dev_pm_opp_free_cpufreq_table(cpu_dev, &freq_table);
+ if (free_opp)
+ of_free_opp_table(cpu_dev);
regulator_put(arm_reg);
if (!IS_ERR(pu_reg))
regulator_put(pu_reg);
diff --git a/drivers/cpufreq/intel_pstate.c b/drivers/cpufreq/intel_pstate.c
index 27bb6d3877ed..1405b393c93d 100644
--- a/drivers/cpufreq/intel_pstate.c
+++ b/drivers/cpufreq/intel_pstate.c
@@ -137,6 +137,7 @@ struct cpu_defaults {
static struct pstate_adjust_policy pid_params;
static struct pstate_funcs pstate_funcs;
+static int hwp_active;
struct perf_limits {
int no_turbo;
@@ -244,6 +245,34 @@ static inline void update_turbo_state(void)
cpu->pstate.max_pstate == cpu->pstate.turbo_pstate);
}
+#define PCT_TO_HWP(x) (x * 255 / 100)
+static void intel_pstate_hwp_set(void)
+{
+ int min, max, cpu;
+ u64 value, freq;
+
+ get_online_cpus();
+
+ for_each_online_cpu(cpu) {
+ rdmsrl_on_cpu(cpu, MSR_HWP_REQUEST, &value);
+ min = PCT_TO_HWP(limits.min_perf_pct);
+ value &= ~HWP_MIN_PERF(~0L);
+ value |= HWP_MIN_PERF(min);
+
+ max = PCT_TO_HWP(limits.max_perf_pct);
+ if (limits.no_turbo) {
+ rdmsrl( MSR_HWP_CAPABILITIES, freq);
+ max = HWP_GUARANTEED_PERF(freq);
+ }
+
+ value &= ~HWP_MAX_PERF(~0L);
+ value |= HWP_MAX_PERF(max);
+ wrmsrl_on_cpu(cpu, MSR_HWP_REQUEST, value);
+ }
+
+ put_online_cpus();
+}
+
/************************** debugfs begin ************************/
static int pid_param_set(void *data, u64 val)
{
@@ -279,6 +308,8 @@ static void __init intel_pstate_debug_expose_params(void)
struct dentry *debugfs_parent;
int i = 0;
+ if (hwp_active)
+ return;
debugfs_parent = debugfs_create_dir("pstate_snb", NULL);
if (IS_ERR_OR_NULL(debugfs_parent))
return;
@@ -329,8 +360,12 @@ static ssize_t store_no_turbo(struct kobject *a, struct attribute *b,
pr_warn("Turbo disabled by BIOS or unavailable on processor\n");
return -EPERM;
}
+
limits.no_turbo = clamp_t(int, input, 0, 1);
+ if (hwp_active)
+ intel_pstate_hwp_set();
+
return count;
}
@@ -348,6 +383,8 @@ static ssize_t store_max_perf_pct(struct kobject *a, struct attribute *b,
limits.max_perf_pct = min(limits.max_policy_pct, limits.max_sysfs_pct);
limits.max_perf = div_fp(int_tofp(limits.max_perf_pct), int_tofp(100));
+ if (hwp_active)
+ intel_pstate_hwp_set();
return count;
}
@@ -363,6 +400,8 @@ static ssize_t store_min_perf_pct(struct kobject *a, struct attribute *b,
limits.min_perf_pct = clamp_t(int, input, 0 , 100);
limits.min_perf = div_fp(int_tofp(limits.min_perf_pct), int_tofp(100));
+ if (hwp_active)
+ intel_pstate_hwp_set();
return count;
}
@@ -395,8 +434,16 @@ static void __init intel_pstate_sysfs_expose_params(void)
rc = sysfs_create_group(intel_pstate_kobject, &intel_pstate_attr_group);
BUG_ON(rc);
}
-
/************************** sysfs end ************************/
+
+static void intel_pstate_hwp_enable(void)
+{
+ hwp_active++;
+ pr_info("intel_pstate HWP enabled\n");
+
+ wrmsrl( MSR_PM_ENABLE, 0x1);
+}
+
static int byt_get_min_pstate(void)
{
u64 value;
@@ -648,6 +695,14 @@ static inline void intel_pstate_sample(struct cpudata *cpu)
cpu->prev_mperf = mperf;
}
+static inline void intel_hwp_set_sample_time(struct cpudata *cpu)
+{
+ int delay;
+
+ delay = msecs_to_jiffies(50);
+ mod_timer_pinned(&cpu->timer, jiffies + delay);
+}
+
static inline void intel_pstate_set_sample_time(struct cpudata *cpu)
{
int delay;
@@ -694,6 +749,14 @@ static inline void intel_pstate_adjust_busy_pstate(struct cpudata *cpu)
intel_pstate_set_pstate(cpu, cpu->pstate.current_pstate - ctl);
}
+static void intel_hwp_timer_func(unsigned long __data)
+{
+ struct cpudata *cpu = (struct cpudata *) __data;
+
+ intel_pstate_sample(cpu);
+ intel_hwp_set_sample_time(cpu);
+}
+
static void intel_pstate_timer_func(unsigned long __data)
{
struct cpudata *cpu = (struct cpudata *) __data;
@@ -730,6 +793,7 @@ static const struct x86_cpu_id intel_pstate_cpu_ids[] = {
ICPU(0x3f, core_params),
ICPU(0x45, core_params),
ICPU(0x46, core_params),
+ ICPU(0x47, core_params),
ICPU(0x4c, byt_params),
ICPU(0x4f, core_params),
ICPU(0x56, core_params),
@@ -737,6 +801,11 @@ static const struct x86_cpu_id intel_pstate_cpu_ids[] = {
};
MODULE_DEVICE_TABLE(x86cpu, intel_pstate_cpu_ids);
+static const struct x86_cpu_id intel_pstate_cpu_oob_ids[] = {
+ ICPU(0x56, core_params),
+ {}
+};
+
static int intel_pstate_init_cpu(unsigned int cpunum)
{
struct cpudata *cpu;
@@ -753,9 +822,14 @@ static int intel_pstate_init_cpu(unsigned int cpunum)
intel_pstate_get_cpu_pstates(cpu);
init_timer_deferrable(&cpu->timer);
- cpu->timer.function = intel_pstate_timer_func;
cpu->timer.data = (unsigned long)cpu;
cpu->timer.expires = jiffies + HZ/100;
+
+ if (!hwp_active)
+ cpu->timer.function = intel_pstate_timer_func;
+ else
+ cpu->timer.function = intel_hwp_timer_func;
+
intel_pstate_busy_pid_reset(cpu);
intel_pstate_sample(cpu);
@@ -792,6 +866,7 @@ static int intel_pstate_set_policy(struct cpufreq_policy *policy)
limits.no_turbo = 0;
return 0;
}
+
limits.min_perf_pct = (policy->min * 100) / policy->cpuinfo.max_freq;
limits.min_perf_pct = clamp_t(int, limits.min_perf_pct, 0 , 100);
limits.min_perf = div_fp(int_tofp(limits.min_perf_pct), int_tofp(100));
@@ -801,6 +876,9 @@ static int intel_pstate_set_policy(struct cpufreq_policy *policy)
limits.max_perf_pct = min(limits.max_policy_pct, limits.max_sysfs_pct);
limits.max_perf = div_fp(int_tofp(limits.max_perf_pct), int_tofp(100));
+ if (hwp_active)
+ intel_pstate_hwp_set();
+
return 0;
}
@@ -823,6 +901,9 @@ static void intel_pstate_stop_cpu(struct cpufreq_policy *policy)
pr_info("intel_pstate CPU %d exiting\n", cpu_num);
del_timer_sync(&all_cpu_data[cpu_num]->timer);
+ if (hwp_active)
+ return;
+
intel_pstate_set_pstate(cpu, cpu->pstate.min_pstate);
}
@@ -866,6 +947,7 @@ static struct cpufreq_driver intel_pstate_driver = {
};
static int __initdata no_load;
+static int __initdata no_hwp;
static int intel_pstate_msrs_not_valid(void)
{
@@ -943,15 +1025,46 @@ static bool intel_pstate_no_acpi_pss(void)
return true;
}
+static bool intel_pstate_has_acpi_ppc(void)
+{
+ int i;
+
+ for_each_possible_cpu(i) {
+ struct acpi_processor *pr = per_cpu(processors, i);
+
+ if (!pr)
+ continue;
+ if (acpi_has_method(pr->handle, "_PPC"))
+ return true;
+ }
+ return false;
+}
+
+enum {
+ PSS,
+ PPC,
+};
+
struct hw_vendor_info {
u16 valid;
char oem_id[ACPI_OEM_ID_SIZE];
char oem_table_id[ACPI_OEM_TABLE_ID_SIZE];
+ int oem_pwr_table;
};
/* Hardware vendor-specific info that has its own power management modes */
static struct hw_vendor_info vendor_info[] = {
- {1, "HP ", "ProLiant"},
+ {1, "HP ", "ProLiant", PSS},
+ {1, "ORACLE", "X4-2 ", PPC},
+ {1, "ORACLE", "X4-2L ", PPC},
+ {1, "ORACLE", "X4-2B ", PPC},
+ {1, "ORACLE", "X3-2 ", PPC},
+ {1, "ORACLE", "X3-2L ", PPC},
+ {1, "ORACLE", "X3-2B ", PPC},
+ {1, "ORACLE", "X4470M2 ", PPC},
+ {1, "ORACLE", "X4270M3 ", PPC},
+ {1, "ORACLE", "X4270M2 ", PPC},
+ {1, "ORACLE", "X4170M2 ", PPC},
{0, "", ""},
};
@@ -959,6 +1072,15 @@ static bool intel_pstate_platform_pwr_mgmt_exists(void)
{
struct acpi_table_header hdr;
struct hw_vendor_info *v_info;
+ const struct x86_cpu_id *id;
+ u64 misc_pwr;
+
+ id = x86_match_cpu(intel_pstate_cpu_oob_ids);
+ if (id) {
+ rdmsrl(MSR_MISC_PWR_MGMT, misc_pwr);
+ if ( misc_pwr & (1 << 8))
+ return true;
+ }
if (acpi_disabled ||
ACPI_FAILURE(acpi_get_table_header(ACPI_SIG_FADT, 0, &hdr)))
@@ -966,15 +1088,21 @@ static bool intel_pstate_platform_pwr_mgmt_exists(void)
for (v_info = vendor_info; v_info->valid; v_info++) {
if (!strncmp(hdr.oem_id, v_info->oem_id, ACPI_OEM_ID_SIZE) &&
- !strncmp(hdr.oem_table_id, v_info->oem_table_id, ACPI_OEM_TABLE_ID_SIZE) &&
- intel_pstate_no_acpi_pss())
- return true;
+ !strncmp(hdr.oem_table_id, v_info->oem_table_id,
+ ACPI_OEM_TABLE_ID_SIZE))
+ switch (v_info->oem_pwr_table) {
+ case PSS:
+ return intel_pstate_no_acpi_pss();
+ case PPC:
+ return intel_pstate_has_acpi_ppc();
+ }
}
return false;
}
#else /* CONFIG_ACPI not enabled */
static inline bool intel_pstate_platform_pwr_mgmt_exists(void) { return false; }
+static inline bool intel_pstate_has_acpi_ppc(void) { return false; }
#endif /* CONFIG_ACPI */
static int __init intel_pstate_init(void)
@@ -982,6 +1110,7 @@ static int __init intel_pstate_init(void)
int cpu, rc = 0;
const struct x86_cpu_id *id;
struct cpu_defaults *cpu_info;
+ struct cpuinfo_x86 *c = &boot_cpu_data;
if (no_load)
return -ENODEV;
@@ -1011,6 +1140,9 @@ static int __init intel_pstate_init(void)
if (!all_cpu_data)
return -ENOMEM;
+ if (cpu_has(c,X86_FEATURE_HWP) && !no_hwp)
+ intel_pstate_hwp_enable();
+
rc = cpufreq_register_driver(&intel_pstate_driver);
if (rc)
goto out;
@@ -1041,6 +1173,8 @@ static int __init intel_pstate_setup(char *str)
if (!strcmp(str, "disable"))
no_load = 1;
+ if (!strcmp(str, "no_hwp"))
+ no_hwp = 1;
return 0;
}
early_param("intel_pstate", intel_pstate_setup);
diff --git a/drivers/cpufreq/ls1x-cpufreq.c b/drivers/cpufreq/ls1x-cpufreq.c
new file mode 100644
index 000000000000..25fbd6a1374f
--- /dev/null
+++ b/drivers/cpufreq/ls1x-cpufreq.c
@@ -0,0 +1,223 @@
+/*
+ * CPU Frequency Scaling for Loongson 1 SoC
+ *
+ * Copyright (C) 2014 Zhang, Keguang <keguang.zhang@gmail.com>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#include <linux/clk.h>
+#include <linux/clk-provider.h>
+#include <linux/cpu.h>
+#include <linux/cpufreq.h>
+#include <linux/delay.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/slab.h>
+
+#include <asm/mach-loongson1/cpufreq.h>
+#include <asm/mach-loongson1/loongson1.h>
+
+static struct {
+ struct device *dev;
+ struct clk *clk; /* CPU clk */
+ struct clk *mux_clk; /* MUX of CPU clk */
+ struct clk *pll_clk; /* PLL clk */
+ struct clk *osc_clk; /* OSC clk */
+ unsigned int max_freq;
+ unsigned int min_freq;
+} ls1x_cpufreq;
+
+static int ls1x_cpufreq_notifier(struct notifier_block *nb,
+ unsigned long val, void *data)
+{
+ if (val == CPUFREQ_POSTCHANGE)
+ current_cpu_data.udelay_val = loops_per_jiffy;
+
+ return NOTIFY_OK;
+}
+
+static struct notifier_block ls1x_cpufreq_notifier_block = {
+ .notifier_call = ls1x_cpufreq_notifier
+};
+
+static int ls1x_cpufreq_target(struct cpufreq_policy *policy,
+ unsigned int index)
+{
+ unsigned int old_freq, new_freq;
+
+ old_freq = policy->cur;
+ new_freq = policy->freq_table[index].frequency;
+
+ /*
+ * The procedure of reconfiguring CPU clk is as below.
+ *
+ * - Reparent CPU clk to OSC clk
+ * - Reset CPU clock (very important)
+ * - Reconfigure CPU DIV
+ * - Reparent CPU clk back to CPU DIV clk
+ */
+
+ dev_dbg(ls1x_cpufreq.dev, "%u KHz --> %u KHz\n", old_freq, new_freq);
+ clk_set_parent(policy->clk, ls1x_cpufreq.osc_clk);
+ __raw_writel(__raw_readl(LS1X_CLK_PLL_DIV) | RST_CPU_EN | RST_CPU,
+ LS1X_CLK_PLL_DIV);
+ __raw_writel(__raw_readl(LS1X_CLK_PLL_DIV) & ~(RST_CPU_EN | RST_CPU),
+ LS1X_CLK_PLL_DIV);
+ clk_set_rate(ls1x_cpufreq.mux_clk, new_freq * 1000);
+ clk_set_parent(policy->clk, ls1x_cpufreq.mux_clk);
+
+ return 0;
+}
+
+static int ls1x_cpufreq_init(struct cpufreq_policy *policy)
+{
+ struct cpufreq_frequency_table *freq_tbl;
+ unsigned int pll_freq, freq;
+ int steps, i, ret;
+
+ pll_freq = clk_get_rate(ls1x_cpufreq.pll_clk) / 1000;
+
+ steps = 1 << DIV_CPU_WIDTH;
+ freq_tbl = kzalloc(sizeof(*freq_tbl) * steps, GFP_KERNEL);
+ if (!freq_tbl) {
+ dev_err(ls1x_cpufreq.dev,
+ "failed to alloc cpufreq_frequency_table\n");
+ ret = -ENOMEM;
+ goto out;
+ }
+
+ for (i = 0; i < (steps - 1); i++) {
+ freq = pll_freq / (i + 1);
+ if ((freq < ls1x_cpufreq.min_freq) ||
+ (freq > ls1x_cpufreq.max_freq))
+ freq_tbl[i].frequency = CPUFREQ_ENTRY_INVALID;
+ else
+ freq_tbl[i].frequency = freq;
+ dev_dbg(ls1x_cpufreq.dev,
+ "cpufreq table: index %d: frequency %d\n", i,
+ freq_tbl[i].frequency);
+ }
+ freq_tbl[i].frequency = CPUFREQ_TABLE_END;
+
+ policy->clk = ls1x_cpufreq.clk;
+ ret = cpufreq_generic_init(policy, freq_tbl, 0);
+ if (ret)
+ kfree(freq_tbl);
+out:
+ return ret;
+}
+
+static int ls1x_cpufreq_exit(struct cpufreq_policy *policy)
+{
+ kfree(policy->freq_table);
+ return 0;
+}
+
+static struct cpufreq_driver ls1x_cpufreq_driver = {
+ .name = "cpufreq-ls1x",
+ .flags = CPUFREQ_STICKY | CPUFREQ_NEED_INITIAL_FREQ_CHECK,
+ .verify = cpufreq_generic_frequency_table_verify,
+ .target_index = ls1x_cpufreq_target,
+ .get = cpufreq_generic_get,
+ .init = ls1x_cpufreq_init,
+ .exit = ls1x_cpufreq_exit,
+ .attr = cpufreq_generic_attr,
+};
+
+static int ls1x_cpufreq_remove(struct platform_device *pdev)
+{
+ cpufreq_unregister_notifier(&ls1x_cpufreq_notifier_block,
+ CPUFREQ_TRANSITION_NOTIFIER);
+ cpufreq_unregister_driver(&ls1x_cpufreq_driver);
+
+ return 0;
+}
+
+static int ls1x_cpufreq_probe(struct platform_device *pdev)
+{
+ struct plat_ls1x_cpufreq *pdata = pdev->dev.platform_data;
+ struct clk *clk;
+ int ret;
+
+ if (!pdata || !pdata->clk_name || !pdata->osc_clk_name)
+ return -EINVAL;
+
+ ls1x_cpufreq.dev = &pdev->dev;
+
+ clk = devm_clk_get(&pdev->dev, pdata->clk_name);
+ if (IS_ERR(clk)) {
+ dev_err(ls1x_cpufreq.dev, "unable to get %s clock\n",
+ pdata->clk_name);
+ ret = PTR_ERR(clk);
+ goto out;
+ }
+ ls1x_cpufreq.clk = clk;
+
+ clk = clk_get_parent(clk);
+ if (IS_ERR(clk)) {
+ dev_err(ls1x_cpufreq.dev, "unable to get parent of %s clock\n",
+ __clk_get_name(ls1x_cpufreq.clk));
+ ret = PTR_ERR(clk);
+ goto out;
+ }
+ ls1x_cpufreq.mux_clk = clk;
+
+ clk = clk_get_parent(clk);
+ if (IS_ERR(clk)) {
+ dev_err(ls1x_cpufreq.dev, "unable to get parent of %s clock\n",
+ __clk_get_name(ls1x_cpufreq.mux_clk));
+ ret = PTR_ERR(clk);
+ goto out;
+ }
+ ls1x_cpufreq.pll_clk = clk;
+
+ clk = devm_clk_get(&pdev->dev, pdata->osc_clk_name);
+ if (IS_ERR(clk)) {
+ dev_err(ls1x_cpufreq.dev, "unable to get %s clock\n",
+ pdata->osc_clk_name);
+ ret = PTR_ERR(clk);
+ goto out;
+ }
+ ls1x_cpufreq.osc_clk = clk;
+
+ ls1x_cpufreq.max_freq = pdata->max_freq;
+ ls1x_cpufreq.min_freq = pdata->min_freq;
+
+ ret = cpufreq_register_driver(&ls1x_cpufreq_driver);
+ if (ret) {
+ dev_err(ls1x_cpufreq.dev,
+ "failed to register cpufreq driver: %d\n", ret);
+ goto out;
+ }
+
+ ret = cpufreq_register_notifier(&ls1x_cpufreq_notifier_block,
+ CPUFREQ_TRANSITION_NOTIFIER);
+
+ if (!ret)
+ goto out;
+
+ dev_err(ls1x_cpufreq.dev, "failed to register cpufreq notifier: %d\n",
+ ret);
+
+ cpufreq_unregister_driver(&ls1x_cpufreq_driver);
+out:
+ return ret;
+}
+
+static struct platform_driver ls1x_cpufreq_platdrv = {
+ .driver = {
+ .name = "ls1x-cpufreq",
+ .owner = THIS_MODULE,
+ },
+ .probe = ls1x_cpufreq_probe,
+ .remove = ls1x_cpufreq_remove,
+};
+
+module_platform_driver(ls1x_cpufreq_platdrv);
+
+MODULE_AUTHOR("Kelvin Cheung <keguang.zhang@gmail.com>");
+MODULE_DESCRIPTION("Loongson 1 CPUFreq driver");
+MODULE_LICENSE("GPL");
diff --git a/drivers/cpufreq/pcc-cpufreq.c b/drivers/cpufreq/pcc-cpufreq.c
index 4d2c8e861089..2a0d58959acf 100644
--- a/drivers/cpufreq/pcc-cpufreq.c
+++ b/drivers/cpufreq/pcc-cpufreq.c
@@ -603,6 +603,13 @@ static void __exit pcc_cpufreq_exit(void)
free_percpu(pcc_cpu_info);
}
+static const struct acpi_device_id processor_device_ids[] = {
+ {ACPI_PROCESSOR_OBJECT_HID, },
+ {ACPI_PROCESSOR_DEVICE_HID, },
+ {},
+};
+MODULE_DEVICE_TABLE(acpi, processor_device_ids);
+
MODULE_AUTHOR("Matthew Garrett, Naga Chumbalkar");
MODULE_VERSION(PCC_VERSION);
MODULE_DESCRIPTION("Processor Clocking Control interface driver");
diff --git a/drivers/cpuidle/cpuidle-arm64.c b/drivers/cpuidle/cpuidle-arm64.c
index 50997ea942fc..80704b931ba4 100644
--- a/drivers/cpuidle/cpuidle-arm64.c
+++ b/drivers/cpuidle/cpuidle-arm64.c
@@ -73,7 +73,6 @@ static struct cpuidle_driver arm64_idle_driver = {
.exit_latency = 1,
.target_residency = 1,
.power_usage = UINT_MAX,
- .flags = CPUIDLE_FLAG_TIME_VALID,
.name = "WFI",
.desc = "ARM64 WFI",
}
@@ -104,11 +103,8 @@ static int __init arm64_idle_init(void)
* reason to initialize the idle driver if only wfi is supported.
*/
ret = dt_init_idle_driver(drv, arm64_idle_state_match, 1);
- if (ret <= 0) {
- if (ret)
- pr_err("failed to initialize idle states\n");
+ if (ret <= 0)
return ret ? : -ENODEV;
- }
/*
* Call arch CPU operations in order to initialize
@@ -122,12 +118,6 @@ static int __init arm64_idle_init(void)
}
}
- ret = cpuidle_register(drv, NULL);
- if (ret) {
- pr_err("failed to register cpuidle driver\n");
- return ret;
- }
-
- return 0;
+ return cpuidle_register(drv, NULL);
}
device_initcall(arm64_idle_init);
diff --git a/drivers/cpuidle/cpuidle-at91.c b/drivers/cpuidle/cpuidle-at91.c
index a0774370c6bc..1964ff07117c 100644
--- a/drivers/cpuidle/cpuidle-at91.c
+++ b/drivers/cpuidle/cpuidle-at91.c
@@ -43,7 +43,6 @@ static struct cpuidle_driver at91_idle_driver = {
.enter = at91_enter_idle,
.exit_latency = 10,
.target_residency = 10000,
- .flags = CPUIDLE_FLAG_TIME_VALID,
.name = "RAM_SR",
.desc = "WFI and DDR Self Refresh",
},
diff --git a/drivers/cpuidle/cpuidle-big_little.c b/drivers/cpuidle/cpuidle-big_little.c
index fbc00a1d3c48..e3e225fe6b45 100644
--- a/drivers/cpuidle/cpuidle-big_little.c
+++ b/drivers/cpuidle/cpuidle-big_little.c
@@ -67,8 +67,7 @@ static struct cpuidle_driver bl_idle_little_driver = {
.enter = bl_enter_powerdown,
.exit_latency = 700,
.target_residency = 2500,
- .flags = CPUIDLE_FLAG_TIME_VALID |
- CPUIDLE_FLAG_TIMER_STOP,
+ .flags = CPUIDLE_FLAG_TIMER_STOP,
.name = "C1",
.desc = "ARM little-cluster power down",
},
@@ -89,8 +88,7 @@ static struct cpuidle_driver bl_idle_big_driver = {
.enter = bl_enter_powerdown,
.exit_latency = 500,
.target_residency = 2000,
- .flags = CPUIDLE_FLAG_TIME_VALID |
- CPUIDLE_FLAG_TIMER_STOP,
+ .flags = CPUIDLE_FLAG_TIMER_STOP,
.name = "C1",
.desc = "ARM big-cluster power down",
},
diff --git a/drivers/cpuidle/cpuidle-calxeda.c b/drivers/cpuidle/cpuidle-calxeda.c
index 6e51114057d0..6541b0bfdfaa 100644
--- a/drivers/cpuidle/cpuidle-calxeda.c
+++ b/drivers/cpuidle/cpuidle-calxeda.c
@@ -55,7 +55,6 @@ static struct cpuidle_driver calxeda_idle_driver = {
{
.name = "PG",
.desc = "Power Gate",
- .flags = CPUIDLE_FLAG_TIME_VALID,
.exit_latency = 30,
.power_usage = 50,
.target_residency = 200,
diff --git a/drivers/cpuidle/cpuidle-cps.c b/drivers/cpuidle/cpuidle-cps.c
index fc7b62720deb..1adb6980b707 100644
--- a/drivers/cpuidle/cpuidle-cps.c
+++ b/drivers/cpuidle/cpuidle-cps.c
@@ -79,7 +79,6 @@ static struct cpuidle_driver cps_driver = {
.enter = cps_nc_enter,
.exit_latency = 200,
.target_residency = 450,
- .flags = CPUIDLE_FLAG_TIME_VALID,
.name = "nc-wait",
.desc = "non-coherent MIPS wait",
},
@@ -87,8 +86,7 @@ static struct cpuidle_driver cps_driver = {
.enter = cps_nc_enter,
.exit_latency = 300,
.target_residency = 700,
- .flags = CPUIDLE_FLAG_TIME_VALID |
- CPUIDLE_FLAG_TIMER_STOP,
+ .flags = CPUIDLE_FLAG_TIMER_STOP,
.name = "clock-gated",
.desc = "core clock gated",
},
@@ -96,8 +94,7 @@ static struct cpuidle_driver cps_driver = {
.enter = cps_nc_enter,
.exit_latency = 600,
.target_residency = 1000,
- .flags = CPUIDLE_FLAG_TIME_VALID |
- CPUIDLE_FLAG_TIMER_STOP,
+ .flags = CPUIDLE_FLAG_TIMER_STOP,
.name = "power-gated",
.desc = "core power gated",
},
diff --git a/drivers/cpuidle/cpuidle-exynos.c b/drivers/cpuidle/cpuidle-exynos.c
index ba9b34b579f3..64d12a855ec6 100644
--- a/drivers/cpuidle/cpuidle-exynos.c
+++ b/drivers/cpuidle/cpuidle-exynos.c
@@ -47,7 +47,6 @@ static struct cpuidle_driver exynos_idle_driver = {
.enter = exynos_enter_lowpower,
.exit_latency = 300,
.target_residency = 100000,
- .flags = CPUIDLE_FLAG_TIME_VALID,
.name = "C1",
.desc = "ARM power down",
},
diff --git a/drivers/cpuidle/cpuidle-kirkwood.c b/drivers/cpuidle/cpuidle-kirkwood.c
index 41ba843251b8..d88f8d7c2143 100644
--- a/drivers/cpuidle/cpuidle-kirkwood.c
+++ b/drivers/cpuidle/cpuidle-kirkwood.c
@@ -47,7 +47,6 @@ static struct cpuidle_driver kirkwood_idle_driver = {
.enter = kirkwood_enter_idle,
.exit_latency = 10,
.target_residency = 100000,
- .flags = CPUIDLE_FLAG_TIME_VALID,
.name = "DDR SR",
.desc = "WFI and DDR Self Refresh",
},
diff --git a/drivers/cpuidle/cpuidle-mvebu-v7.c b/drivers/cpuidle/cpuidle-mvebu-v7.c
index 45371bb16214..dd4c176df2a3 100644
--- a/drivers/cpuidle/cpuidle-mvebu-v7.c
+++ b/drivers/cpuidle/cpuidle-mvebu-v7.c
@@ -53,7 +53,6 @@ static struct cpuidle_driver armadaxp_idle_driver = {
.exit_latency = 10,
.power_usage = 50,
.target_residency = 100,
- .flags = CPUIDLE_FLAG_TIME_VALID,
.name = "MV CPU IDLE",
.desc = "CPU power down",
},
@@ -62,8 +61,7 @@ static struct cpuidle_driver armadaxp_idle_driver = {
.exit_latency = 100,
.power_usage = 5,
.target_residency = 1000,
- .flags = CPUIDLE_FLAG_TIME_VALID |
- MVEBU_V7_FLAG_DEEP_IDLE,
+ .flags = MVEBU_V7_FLAG_DEEP_IDLE,
.name = "MV CPU DEEP IDLE",
.desc = "CPU and L2 Fabric power down",
},
@@ -78,8 +76,7 @@ static struct cpuidle_driver armada370_idle_driver = {
.exit_latency = 100,
.power_usage = 5,
.target_residency = 1000,
- .flags = (CPUIDLE_FLAG_TIME_VALID |
- MVEBU_V7_FLAG_DEEP_IDLE),
+ .flags = MVEBU_V7_FLAG_DEEP_IDLE,
.name = "Deep Idle",
.desc = "CPU and L2 Fabric power down",
},
@@ -94,7 +91,6 @@ static struct cpuidle_driver armada38x_idle_driver = {
.exit_latency = 10,
.power_usage = 5,
.target_residency = 100,
- .flags = CPUIDLE_FLAG_TIME_VALID,
.name = "Idle",
.desc = "CPU and SCU power down",
},
diff --git a/drivers/cpuidle/cpuidle-powernv.c b/drivers/cpuidle/cpuidle-powernv.c
index 7d3a3497dd4c..e9248bb9173a 100644
--- a/drivers/cpuidle/cpuidle-powernv.c
+++ b/drivers/cpuidle/cpuidle-powernv.c
@@ -93,7 +93,6 @@ static struct cpuidle_state powernv_states[MAX_POWERNV_IDLE_STATES] = {
{ /* Snooze */
.name = "snooze",
.desc = "snooze",
- .flags = CPUIDLE_FLAG_TIME_VALID,
.exit_latency = 0,
.target_residency = 0,
.enter = &snooze_loop },
@@ -202,7 +201,7 @@ static int powernv_add_idle_states(void)
/* Add NAP state */
strcpy(powernv_states[nr_idle_states].name, "Nap");
strcpy(powernv_states[nr_idle_states].desc, "Nap");
- powernv_states[nr_idle_states].flags = CPUIDLE_FLAG_TIME_VALID;
+ powernv_states[nr_idle_states].flags = 0;
powernv_states[nr_idle_states].exit_latency =
((unsigned int)latency_ns) / 1000;
powernv_states[nr_idle_states].target_residency =
@@ -215,8 +214,7 @@ static int powernv_add_idle_states(void)
/* Add FASTSLEEP state */
strcpy(powernv_states[nr_idle_states].name, "FastSleep");
strcpy(powernv_states[nr_idle_states].desc, "FastSleep");
- powernv_states[nr_idle_states].flags =
- CPUIDLE_FLAG_TIME_VALID | CPUIDLE_FLAG_TIMER_STOP;
+ powernv_states[nr_idle_states].flags = CPUIDLE_FLAG_TIMER_STOP;
powernv_states[nr_idle_states].exit_latency =
((unsigned int)latency_ns) / 1000;
powernv_states[nr_idle_states].target_residency =
diff --git a/drivers/cpuidle/cpuidle-pseries.c b/drivers/cpuidle/cpuidle-pseries.c
index 6f7b01956885..bb9e2b6f3ecc 100644
--- a/drivers/cpuidle/cpuidle-pseries.c
+++ b/drivers/cpuidle/cpuidle-pseries.c
@@ -142,14 +142,12 @@ static struct cpuidle_state dedicated_states[] = {
{ /* Snooze */
.name = "snooze",
.desc = "snooze",
- .flags = CPUIDLE_FLAG_TIME_VALID,
.exit_latency = 0,
.target_residency = 0,
.enter = &snooze_loop },
{ /* CEDE */
.name = "CEDE",
.desc = "CEDE",
- .flags = CPUIDLE_FLAG_TIME_VALID,
.exit_latency = 10,
.target_residency = 100,
.enter = &dedicated_cede_loop },
@@ -162,7 +160,6 @@ static struct cpuidle_state shared_states[] = {
{ /* Shared Cede */
.name = "Shared Cede",
.desc = "Shared Cede",
- .flags = CPUIDLE_FLAG_TIME_VALID,
.exit_latency = 0,
.target_residency = 0,
.enter = &shared_cede_loop },
diff --git a/drivers/cpuidle/cpuidle-ux500.c b/drivers/cpuidle/cpuidle-ux500.c
index 5e35804b1a95..292e65a90308 100644
--- a/drivers/cpuidle/cpuidle-ux500.c
+++ b/drivers/cpuidle/cpuidle-ux500.c
@@ -101,8 +101,7 @@ static struct cpuidle_driver ux500_idle_driver = {
.enter = ux500_enter_idle,
.exit_latency = 70,
.target_residency = 260,
- .flags = CPUIDLE_FLAG_TIME_VALID |
- CPUIDLE_FLAG_TIMER_STOP,
+ .flags = CPUIDLE_FLAG_TIMER_STOP,
.name = "ApIdle",
.desc = "ARM Retention",
},
diff --git a/drivers/cpuidle/cpuidle-zynq.c b/drivers/cpuidle/cpuidle-zynq.c
index c61b8b2a7c77..022dec86de8e 100644
--- a/drivers/cpuidle/cpuidle-zynq.c
+++ b/drivers/cpuidle/cpuidle-zynq.c
@@ -52,7 +52,6 @@ static struct cpuidle_driver zynq_idle_driver = {
.enter = zynq_enter_idle,
.exit_latency = 10,
.target_residency = 10000,
- .flags = CPUIDLE_FLAG_TIME_VALID,
.name = "RAM_SR",
.desc = "WFI and RAM Self Refresh",
},
diff --git a/drivers/cpuidle/driver.c b/drivers/cpuidle/driver.c
index e431d11abf8d..2697e87d5b34 100644
--- a/drivers/cpuidle/driver.c
+++ b/drivers/cpuidle/driver.c
@@ -201,7 +201,6 @@ static void poll_idle_init(struct cpuidle_driver *drv)
state->exit_latency = 0;
state->target_residency = 0;
state->power_usage = -1;
- state->flags = CPUIDLE_FLAG_TIME_VALID;
state->enter = poll_idle;
state->disabled = false;
}
diff --git a/drivers/cpuidle/dt_idle_states.c b/drivers/cpuidle/dt_idle_states.c
index 52f4d11bbf3f..a5c111b67f37 100644
--- a/drivers/cpuidle/dt_idle_states.c
+++ b/drivers/cpuidle/dt_idle_states.c
@@ -27,6 +27,7 @@ static int init_state_node(struct cpuidle_state *idle_state,
{
int err;
const struct of_device_id *match_id;
+ const char *desc;
match_id = of_match_node(matches, state_node);
if (!match_id)
@@ -73,7 +74,11 @@ static int init_state_node(struct cpuidle_state *idle_state,
return -EINVAL;
}
- idle_state->flags = CPUIDLE_FLAG_TIME_VALID;
+ err = of_property_read_string(state_node, "idle-state-name", &desc);
+ if (err)
+ desc = state_node->name;
+
+ idle_state->flags = 0;
if (of_property_read_bool(state_node, "local-timer-stop"))
idle_state->flags |= CPUIDLE_FLAG_TIMER_STOP;
/*
@@ -82,7 +87,7 @@ static int init_state_node(struct cpuidle_state *idle_state,
* and desc become string pointers
*/
strncpy(idle_state->name, state_node->name, CPUIDLE_NAME_LEN - 1);
- strncpy(idle_state->desc, state_node->name, CPUIDLE_DESC_LEN - 1);
+ strncpy(idle_state->desc, desc, CPUIDLE_DESC_LEN - 1);
return 0;
}
@@ -169,6 +174,9 @@ int dt_init_idle_driver(struct cpuidle_driver *drv,
if (!state_node)
break;
+ if (!of_device_is_available(state_node))
+ continue;
+
if (!idle_state_valid(state_node, i, cpumask)) {
pr_warn("%s idle state not valid, bailing out\n",
state_node->full_name);
diff --git a/drivers/cpuidle/governors/ladder.c b/drivers/cpuidle/governors/ladder.c
index 06b57c4c4d80..37263d9a1051 100644
--- a/drivers/cpuidle/governors/ladder.c
+++ b/drivers/cpuidle/governors/ladder.c
@@ -79,7 +79,7 @@ static int ladder_select_state(struct cpuidle_driver *drv,
last_state = &ldev->states[last_idx];
- if (drv->states[last_idx].flags & CPUIDLE_FLAG_TIME_VALID) {
+ if (!(drv->states[last_idx].flags & CPUIDLE_FLAG_TIME_INVALID)) {
last_residency = cpuidle_get_last_residency(dev) - \
drv->states[last_idx].exit_latency;
}
diff --git a/drivers/cpuidle/governors/menu.c b/drivers/cpuidle/governors/menu.c
index 710a233b9b0d..659d7b0c9ebf 100644
--- a/drivers/cpuidle/governors/menu.c
+++ b/drivers/cpuidle/governors/menu.c
@@ -405,7 +405,7 @@ static void menu_update(struct cpuidle_driver *drv, struct cpuidle_device *dev)
* the measured amount of time is less than the exit latency,
* assume the state was never reached and the exit latency is 0.
*/
- if (unlikely(!(target->flags & CPUIDLE_FLAG_TIME_VALID))) {
+ if (unlikely(target->flags & CPUIDLE_FLAG_TIME_INVALID)) {
/* Use timer value as is */
measured_us = data->next_timer_us;
diff --git a/drivers/dma/dw/core.c b/drivers/dma/dw/core.c
index 244722170410..380478562b7d 100644
--- a/drivers/dma/dw/core.c
+++ b/drivers/dma/dw/core.c
@@ -22,6 +22,7 @@
#include <linux/mm.h>
#include <linux/module.h>
#include <linux/slab.h>
+#include <linux/pm_runtime.h>
#include "../dmaengine.h"
#include "internal.h"
@@ -1504,6 +1505,9 @@ int dw_dma_probe(struct dw_dma_chip *chip, struct dw_dma_platform_data *pdata)
dw->regs = chip->regs;
chip->dw = dw;
+ pm_runtime_enable(chip->dev);
+ pm_runtime_get_sync(chip->dev);
+
dw_params = dma_read_byaddr(chip->regs, DW_PARAMS);
autocfg = dw_params >> DW_PARAMS_EN & 0x1;
@@ -1667,11 +1671,14 @@ int dw_dma_probe(struct dw_dma_chip *chip, struct dw_dma_platform_data *pdata)
dev_info(chip->dev, "DesignWare DMA Controller, %d channels\n",
nr_channels);
+ pm_runtime_put_sync_suspend(chip->dev);
+
return 0;
err_dma_register:
free_irq(chip->irq, dw);
err_pdata:
+ pm_runtime_put_sync_suspend(chip->dev);
return err;
}
EXPORT_SYMBOL_GPL(dw_dma_probe);
@@ -1681,6 +1688,8 @@ int dw_dma_remove(struct dw_dma_chip *chip)
struct dw_dma *dw = chip->dw;
struct dw_dma_chan *dwc, *_dwc;
+ pm_runtime_get_sync(chip->dev);
+
dw_dma_off(dw);
dma_async_device_unregister(&dw->dma);
@@ -1693,6 +1702,8 @@ int dw_dma_remove(struct dw_dma_chip *chip)
channel_clear_bit(dw, CH_EN, dwc->mask);
}
+ pm_runtime_put_sync_suspend(chip->dev);
+ pm_runtime_disable(chip->dev);
return 0;
}
EXPORT_SYMBOL_GPL(dw_dma_remove);
diff --git a/drivers/dma/nbpfaxi.c b/drivers/dma/nbpfaxi.c
index 5aeada56a442..bda20e6e1007 100644
--- a/drivers/dma/nbpfaxi.c
+++ b/drivers/dma/nbpfaxi.c
@@ -1479,7 +1479,7 @@ static struct platform_device_id nbpf_ids[] = {
};
MODULE_DEVICE_TABLE(platform, nbpf_ids);
-#ifdef CONFIG_PM_RUNTIME
+#ifdef CONFIG_PM
static int nbpf_runtime_suspend(struct device *dev)
{
struct nbpf_device *nbpf = platform_get_drvdata(to_platform_device(dev));
diff --git a/drivers/dma/ste_dma40.c b/drivers/dma/ste_dma40.c
index 5fe59335e247..d9ca3e32d748 100644
--- a/drivers/dma/ste_dma40.c
+++ b/drivers/dma/ste_dma40.c
@@ -3051,7 +3051,7 @@ static int dma40_runtime_resume(struct device *dev)
static const struct dev_pm_ops dma40_pm_ops = {
SET_LATE_SYSTEM_SLEEP_PM_OPS(dma40_suspend, dma40_resume)
- SET_PM_RUNTIME_PM_OPS(dma40_runtime_suspend,
+ SET_RUNTIME_PM_OPS(dma40_runtime_suspend,
dma40_runtime_resume,
NULL)
};
diff --git a/drivers/dma/tegra20-apb-dma.c b/drivers/dma/tegra20-apb-dma.c
index 16efa603ff65..1c867d0303db 100644
--- a/drivers/dma/tegra20-apb-dma.c
+++ b/drivers/dma/tegra20-apb-dma.c
@@ -1587,7 +1587,7 @@ static int tegra_dma_pm_resume(struct device *dev)
#endif
static const struct dev_pm_ops tegra_dma_dev_pm_ops = {
-#ifdef CONFIG_PM_RUNTIME
+#ifdef CONFIG_PM
.runtime_suspend = tegra_dma_runtime_suspend,
.runtime_resume = tegra_dma_runtime_resume,
#endif
diff --git a/drivers/gpio/devres.c b/drivers/gpio/devres.c
index 954b9f6b0ef8..13dbd3dfc33a 100644
--- a/drivers/gpio/devres.c
+++ b/drivers/gpio/devres.c
@@ -109,6 +109,38 @@ struct gpio_desc *__must_check __devm_gpiod_get_index(struct device *dev,
EXPORT_SYMBOL(__devm_gpiod_get_index);
/**
+ * devm_get_gpiod_from_child - get a GPIO descriptor from a device's child node
+ * @dev: GPIO consumer
+ * @child: firmware node (child of @dev)
+ *
+ * GPIO descriptors returned from this function are automatically disposed on
+ * driver detach.
+ */
+struct gpio_desc *devm_get_gpiod_from_child(struct device *dev,
+ struct fwnode_handle *child)
+{
+ struct gpio_desc **dr;
+ struct gpio_desc *desc;
+
+ dr = devres_alloc(devm_gpiod_release, sizeof(struct gpio_desc *),
+ GFP_KERNEL);
+ if (!dr)
+ return ERR_PTR(-ENOMEM);
+
+ desc = fwnode_get_named_gpiod(child, "gpios");
+ if (IS_ERR(desc)) {
+ devres_free(dr);
+ return desc;
+ }
+
+ *dr = desc;
+ devres_add(dev, dr);
+
+ return desc;
+}
+EXPORT_SYMBOL(devm_get_gpiod_from_child);
+
+/**
* devm_gpiod_get_index_optional - Resource-managed gpiod_get_index_optional()
* @dev: GPIO consumer
* @con_id: function within the GPIO consumer
diff --git a/drivers/gpio/gpio-omap.c b/drivers/gpio/gpio-omap.c
index 415682f69214..3d6b445665ad 100644
--- a/drivers/gpio/gpio-omap.c
+++ b/drivers/gpio/gpio-omap.c
@@ -1259,7 +1259,7 @@ static int omap_gpio_probe(struct platform_device *pdev)
#ifdef CONFIG_ARCH_OMAP2PLUS
-#if defined(CONFIG_PM_RUNTIME)
+#if defined(CONFIG_PM)
static void omap_gpio_restore_context(struct gpio_bank *bank);
static int omap_gpio_runtime_suspend(struct device *dev)
@@ -1440,7 +1440,7 @@ static int omap_gpio_runtime_resume(struct device *dev)
return 0;
}
-#endif /* CONFIG_PM_RUNTIME */
+#endif /* CONFIG_PM */
void omap2_gpio_prepare_for_idle(int pwr_mode)
{
@@ -1468,7 +1468,7 @@ void omap2_gpio_resume_after_idle(void)
}
}
-#if defined(CONFIG_PM_RUNTIME)
+#if defined(CONFIG_PM)
static void omap_gpio_init_context(struct gpio_bank *p)
{
struct omap_gpio_reg_offs *regs = p->regs;
@@ -1525,7 +1525,7 @@ static void omap_gpio_restore_context(struct gpio_bank *bank)
writel_relaxed(bank->context.irqenable2,
bank->base + bank->regs->irqenable2);
}
-#endif /* CONFIG_PM_RUNTIME */
+#endif /* CONFIG_PM */
#else
#define omap_gpio_runtime_suspend NULL
#define omap_gpio_runtime_resume NULL
diff --git a/drivers/gpio/gpio-sch.c b/drivers/gpio/gpio-sch.c
index 41e91d70301e..99720c8bc8ed 100644
--- a/drivers/gpio/gpio-sch.c
+++ b/drivers/gpio/gpio-sch.c
@@ -29,290 +29,221 @@
#include <linux/gpio.h>
-static DEFINE_SPINLOCK(gpio_lock);
-
-#define CGEN (0x00)
-#define CGIO (0x04)
-#define CGLV (0x08)
-
-#define RGEN (0x20)
-#define RGIO (0x24)
-#define RGLV (0x28)
-
-static unsigned short gpio_ba;
-
-static int sch_gpio_core_direction_in(struct gpio_chip *gc, unsigned gpio_num)
-{
- u8 curr_dirs;
- unsigned short offset, bit;
-
- spin_lock(&gpio_lock);
-
- offset = CGIO + gpio_num / 8;
- bit = gpio_num % 8;
-
- curr_dirs = inb(gpio_ba + offset);
-
- if (!(curr_dirs & (1 << bit)))
- outb(curr_dirs | (1 << bit), gpio_ba + offset);
+#define GEN 0x00
+#define GIO 0x04
+#define GLV 0x08
+
+struct sch_gpio {
+ struct gpio_chip chip;
+ spinlock_t lock;
+ unsigned short iobase;
+ unsigned short core_base;
+ unsigned short resume_base;
+};
- spin_unlock(&gpio_lock);
- return 0;
-}
+#define to_sch_gpio(c) container_of(c, struct sch_gpio, chip)
-static int sch_gpio_core_get(struct gpio_chip *gc, unsigned gpio_num)
+static unsigned sch_gpio_offset(struct sch_gpio *sch, unsigned gpio,
+ unsigned reg)
{
- int res;
- unsigned short offset, bit;
+ unsigned base = 0;
- offset = CGLV + gpio_num / 8;
- bit = gpio_num % 8;
+ if (gpio >= sch->resume_base) {
+ gpio -= sch->resume_base;
+ base += 0x20;
+ }
- res = !!(inb(gpio_ba + offset) & (1 << bit));
- return res;
+ return base + reg + gpio / 8;
}
-static void sch_gpio_core_set(struct gpio_chip *gc, unsigned gpio_num, int val)
+static unsigned sch_gpio_bit(struct sch_gpio *sch, unsigned gpio)
{
- u8 curr_vals;
- unsigned short offset, bit;
-
- spin_lock(&gpio_lock);
-
- offset = CGLV + gpio_num / 8;
- bit = gpio_num % 8;
-
- curr_vals = inb(gpio_ba + offset);
-
- if (val)
- outb(curr_vals | (1 << bit), gpio_ba + offset);
- else
- outb((curr_vals & ~(1 << bit)), gpio_ba + offset);
- spin_unlock(&gpio_lock);
+ if (gpio >= sch->resume_base)
+ gpio -= sch->resume_base;
+ return gpio % 8;
}
-static int sch_gpio_core_direction_out(struct gpio_chip *gc,
- unsigned gpio_num, int val)
+static void sch_gpio_enable(struct sch_gpio *sch, unsigned gpio)
{
- u8 curr_dirs;
unsigned short offset, bit;
+ u8 enable;
- spin_lock(&gpio_lock);
+ spin_lock(&sch->lock);
- offset = CGIO + gpio_num / 8;
- bit = gpio_num % 8;
-
- curr_dirs = inb(gpio_ba + offset);
- if (curr_dirs & (1 << bit))
- outb(curr_dirs & ~(1 << bit), gpio_ba + offset);
+ offset = sch_gpio_offset(sch, gpio, GEN);
+ bit = sch_gpio_bit(sch, gpio);
- spin_unlock(&gpio_lock);
+ enable = inb(sch->iobase + offset);
+ if (!(enable & (1 << bit)))
+ outb(enable | (1 << bit), sch->iobase + offset);
- /*
- * according to the datasheet, writing to the level register has no
- * effect when GPIO is programmed as input.
- * Actually the the level register is read-only when configured as input.
- * Thus presetting the output level before switching to output is _NOT_ possible.
- * Hence we set the level after configuring the GPIO as output.
- * But we cannot prevent a short low pulse if direction is set to high
- * and an external pull-up is connected.
- */
- sch_gpio_core_set(gc, gpio_num, val);
- return 0;
+ spin_unlock(&sch->lock);
}
-static struct gpio_chip sch_gpio_core = {
- .label = "sch_gpio_core",
- .owner = THIS_MODULE,
- .direction_input = sch_gpio_core_direction_in,
- .get = sch_gpio_core_get,
- .direction_output = sch_gpio_core_direction_out,
- .set = sch_gpio_core_set,
-};
-
-static int sch_gpio_resume_direction_in(struct gpio_chip *gc,
- unsigned gpio_num)
+static int sch_gpio_direction_in(struct gpio_chip *gc, unsigned gpio_num)
{
+ struct sch_gpio *sch = to_sch_gpio(gc);
u8 curr_dirs;
unsigned short offset, bit;
- spin_lock(&gpio_lock);
+ spin_lock(&sch->lock);
- offset = RGIO + gpio_num / 8;
- bit = gpio_num % 8;
+ offset = sch_gpio_offset(sch, gpio_num, GIO);
+ bit = sch_gpio_bit(sch, gpio_num);
- curr_dirs = inb(gpio_ba + offset);
+ curr_dirs = inb(sch->iobase + offset);
if (!(curr_dirs & (1 << bit)))
- outb(curr_dirs | (1 << bit), gpio_ba + offset);
+ outb(curr_dirs | (1 << bit), sch->iobase + offset);
- spin_unlock(&gpio_lock);
+ spin_unlock(&sch->lock);
return 0;
}
-static int sch_gpio_resume_get(struct gpio_chip *gc, unsigned gpio_num)
+static int sch_gpio_get(struct gpio_chip *gc, unsigned gpio_num)
{
+ struct sch_gpio *sch = to_sch_gpio(gc);
+ int res;
unsigned short offset, bit;
- offset = RGLV + gpio_num / 8;
- bit = gpio_num % 8;
+ offset = sch_gpio_offset(sch, gpio_num, GLV);
+ bit = sch_gpio_bit(sch, gpio_num);
+
+ res = !!(inb(sch->iobase + offset) & (1 << bit));
- return !!(inb(gpio_ba + offset) & (1 << bit));
+ return res;
}
-static void sch_gpio_resume_set(struct gpio_chip *gc,
- unsigned gpio_num, int val)
+static void sch_gpio_set(struct gpio_chip *gc, unsigned gpio_num, int val)
{
+ struct sch_gpio *sch = to_sch_gpio(gc);
u8 curr_vals;
unsigned short offset, bit;
- spin_lock(&gpio_lock);
+ spin_lock(&sch->lock);
- offset = RGLV + gpio_num / 8;
- bit = gpio_num % 8;
+ offset = sch_gpio_offset(sch, gpio_num, GLV);
+ bit = sch_gpio_bit(sch, gpio_num);
- curr_vals = inb(gpio_ba + offset);
+ curr_vals = inb(sch->iobase + offset);
if (val)
- outb(curr_vals | (1 << bit), gpio_ba + offset);
+ outb(curr_vals | (1 << bit), sch->iobase + offset);
else
- outb((curr_vals & ~(1 << bit)), gpio_ba + offset);
+ outb((curr_vals & ~(1 << bit)), sch->iobase + offset);
- spin_unlock(&gpio_lock);
+ spin_unlock(&sch->lock);
}
-static int sch_gpio_resume_direction_out(struct gpio_chip *gc,
- unsigned gpio_num, int val)
+static int sch_gpio_direction_out(struct gpio_chip *gc, unsigned gpio_num,
+ int val)
{
+ struct sch_gpio *sch = to_sch_gpio(gc);
u8 curr_dirs;
unsigned short offset, bit;
- offset = RGIO + gpio_num / 8;
- bit = gpio_num % 8;
+ spin_lock(&sch->lock);
- spin_lock(&gpio_lock);
+ offset = sch_gpio_offset(sch, gpio_num, GIO);
+ bit = sch_gpio_bit(sch, gpio_num);
- curr_dirs = inb(gpio_ba + offset);
+ curr_dirs = inb(sch->iobase + offset);
if (curr_dirs & (1 << bit))
- outb(curr_dirs & ~(1 << bit), gpio_ba + offset);
+ outb(curr_dirs & ~(1 << bit), sch->iobase + offset);
- spin_unlock(&gpio_lock);
+ spin_unlock(&sch->lock);
/*
- * according to the datasheet, writing to the level register has no
- * effect when GPIO is programmed as input.
- * Actually the the level register is read-only when configured as input.
- * Thus presetting the output level before switching to output is _NOT_ possible.
- * Hence we set the level after configuring the GPIO as output.
- * But we cannot prevent a short low pulse if direction is set to high
- * and an external pull-up is connected.
- */
- sch_gpio_resume_set(gc, gpio_num, val);
+ * according to the datasheet, writing to the level register has no
+ * effect when GPIO is programmed as input.
+ * Actually the the level register is read-only when configured as input.
+ * Thus presetting the output level before switching to output is _NOT_ possible.
+ * Hence we set the level after configuring the GPIO as output.
+ * But we cannot prevent a short low pulse if direction is set to high
+ * and an external pull-up is connected.
+ */
+ sch_gpio_set(gc, gpio_num, val);
return 0;
}
-static struct gpio_chip sch_gpio_resume = {
- .label = "sch_gpio_resume",
+static struct gpio_chip sch_gpio_chip = {
+ .label = "sch_gpio",
.owner = THIS_MODULE,
- .direction_input = sch_gpio_resume_direction_in,
- .get = sch_gpio_resume_get,
- .direction_output = sch_gpio_resume_direction_out,
- .set = sch_gpio_resume_set,
+ .direction_input = sch_gpio_direction_in,
+ .get = sch_gpio_get,
+ .direction_output = sch_gpio_direction_out,
+ .set = sch_gpio_set,
};
static int sch_gpio_probe(struct platform_device *pdev)
{
+ struct sch_gpio *sch;
struct resource *res;
- int err, id;
- id = pdev->id;
- if (!id)
- return -ENODEV;
+ sch = devm_kzalloc(&pdev->dev, sizeof(*sch), GFP_KERNEL);
+ if (!sch)
+ return -ENOMEM;
res = platform_get_resource(pdev, IORESOURCE_IO, 0);
if (!res)
return -EBUSY;
- if (!request_region(res->start, resource_size(res), pdev->name))
+ if (!devm_request_region(&pdev->dev, res->start, resource_size(res),
+ pdev->name))
return -EBUSY;
- gpio_ba = res->start;
+ spin_lock_init(&sch->lock);
+ sch->iobase = res->start;
+ sch->chip = sch_gpio_chip;
+ sch->chip.label = dev_name(&pdev->dev);
+ sch->chip.dev = &pdev->dev;
- switch (id) {
+ switch (pdev->id) {
case PCI_DEVICE_ID_INTEL_SCH_LPC:
- sch_gpio_core.base = 0;
- sch_gpio_core.ngpio = 10;
- sch_gpio_resume.base = 10;
- sch_gpio_resume.ngpio = 4;
+ sch->core_base = 0;
+ sch->resume_base = 10;
+ sch->chip.ngpio = 14;
+
/*
* GPIO[6:0] enabled by default
* GPIO7 is configured by the CMC as SLPIOVR
* Enable GPIO[9:8] core powered gpios explicitly
*/
- outb(0x3, gpio_ba + CGEN + 1);
+ sch_gpio_enable(sch, 8);
+ sch_gpio_enable(sch, 9);
/*
* SUS_GPIO[2:0] enabled by default
* Enable SUS_GPIO3 resume powered gpio explicitly
*/
- outb(0x8, gpio_ba + RGEN);
+ sch_gpio_enable(sch, 13);
break;
case PCI_DEVICE_ID_INTEL_ITC_LPC:
- sch_gpio_core.base = 0;
- sch_gpio_core.ngpio = 5;
- sch_gpio_resume.base = 5;
- sch_gpio_resume.ngpio = 9;
+ sch->core_base = 0;
+ sch->resume_base = 5;
+ sch->chip.ngpio = 14;
break;
case PCI_DEVICE_ID_INTEL_CENTERTON_ILB:
- sch_gpio_core.base = 0;
- sch_gpio_core.ngpio = 21;
- sch_gpio_resume.base = 21;
- sch_gpio_resume.ngpio = 9;
+ sch->core_base = 0;
+ sch->resume_base = 21;
+ sch->chip.ngpio = 30;
break;
default:
- err = -ENODEV;
- goto err_sch_gpio_core;
+ return -ENODEV;
}
- sch_gpio_core.dev = &pdev->dev;
- sch_gpio_resume.dev = &pdev->dev;
-
- err = gpiochip_add(&sch_gpio_core);
- if (err < 0)
- goto err_sch_gpio_core;
+ platform_set_drvdata(pdev, sch);
- err = gpiochip_add(&sch_gpio_resume);
- if (err < 0)
- goto err_sch_gpio_resume;
-
- return 0;
-
-err_sch_gpio_resume:
- gpiochip_remove(&sch_gpio_core);
-
-err_sch_gpio_core:
- release_region(res->start, resource_size(res));
- gpio_ba = 0;
-
- return err;
+ return gpiochip_add(&sch->chip);
}
static int sch_gpio_remove(struct platform_device *pdev)
{
- struct resource *res;
- if (gpio_ba) {
-
- gpiochip_remove(&sch_gpio_core);
- gpiochip_remove(&sch_gpio_resume);
-
- res = platform_get_resource(pdev, IORESOURCE_IO, 0);
-
- release_region(res->start, resource_size(res));
- gpio_ba = 0;
- }
+ struct sch_gpio *sch = platform_get_drvdata(pdev);
+ gpiochip_remove(&sch->chip);
return 0;
}
diff --git a/drivers/gpio/gpio-zynq.c b/drivers/gpio/gpio-zynq.c
index 74cd480bf8de..184c4b1b2558 100644
--- a/drivers/gpio/gpio-zynq.c
+++ b/drivers/gpio/gpio-zynq.c
@@ -578,7 +578,7 @@ static void zynq_gpio_free(struct gpio_chip *chip, unsigned offset)
static const struct dev_pm_ops zynq_gpio_dev_pm_ops = {
SET_SYSTEM_SLEEP_PM_OPS(zynq_gpio_suspend, zynq_gpio_resume)
- SET_PM_RUNTIME_PM_OPS(zynq_gpio_runtime_suspend,
+ SET_RUNTIME_PM_OPS(zynq_gpio_runtime_suspend,
zynq_gpio_runtime_resume, NULL)
};
diff --git a/drivers/gpio/gpiolib-acpi.c b/drivers/gpio/gpiolib-acpi.c
index 05c6275da224..ba98bb59a58f 100644
--- a/drivers/gpio/gpiolib-acpi.c
+++ b/drivers/gpio/gpiolib-acpi.c
@@ -287,9 +287,45 @@ void acpi_gpiochip_free_interrupts(struct gpio_chip *chip)
}
}
+int acpi_dev_add_driver_gpios(struct acpi_device *adev,
+ const struct acpi_gpio_mapping *gpios)
+{
+ if (adev && gpios) {
+ adev->driver_gpios = gpios;
+ return 0;
+ }
+ return -EINVAL;
+}
+EXPORT_SYMBOL_GPL(acpi_dev_add_driver_gpios);
+
+static bool acpi_get_driver_gpio_data(struct acpi_device *adev,
+ const char *name, int index,
+ struct acpi_reference_args *args)
+{
+ const struct acpi_gpio_mapping *gm;
+
+ if (!adev->driver_gpios)
+ return false;
+
+ for (gm = adev->driver_gpios; gm->name; gm++)
+ if (!strcmp(name, gm->name) && gm->data && index < gm->size) {
+ const struct acpi_gpio_params *par = gm->data + index;
+
+ args->adev = adev;
+ args->args[0] = par->crs_entry_index;
+ args->args[1] = par->line_index;
+ args->args[2] = par->active_low;
+ args->nargs = 3;
+ return true;
+ }
+
+ return false;
+}
+
struct acpi_gpio_lookup {
struct acpi_gpio_info info;
int index;
+ int pin_index;
struct gpio_desc *desc;
int n;
};
@@ -303,13 +339,24 @@ static int acpi_find_gpio(struct acpi_resource *ares, void *data)
if (lookup->n++ == lookup->index && !lookup->desc) {
const struct acpi_resource_gpio *agpio = &ares->data.gpio;
+ int pin_index = lookup->pin_index;
+
+ if (pin_index >= agpio->pin_table_length)
+ return 1;
lookup->desc = acpi_get_gpiod(agpio->resource_source.string_ptr,
- agpio->pin_table[0]);
+ agpio->pin_table[pin_index]);
lookup->info.gpioint =
agpio->connection_type == ACPI_RESOURCE_GPIO_TYPE_INT;
- lookup->info.active_low =
- agpio->polarity == ACPI_ACTIVE_LOW;
+
+ /*
+ * ActiveLow is only specified for GpioInt resource. If
+ * GpioIo is used then the only way to set the flag is
+ * to use _DSD "gpios" property.
+ */
+ if (lookup->info.gpioint)
+ lookup->info.active_low =
+ agpio->polarity == ACPI_ACTIVE_LOW;
}
return 1;
@@ -317,40 +364,79 @@ static int acpi_find_gpio(struct acpi_resource *ares, void *data)
/**
* acpi_get_gpiod_by_index() - get a GPIO descriptor from device resources
- * @dev: pointer to a device to get GPIO from
+ * @adev: pointer to a ACPI device to get GPIO from
+ * @propname: Property name of the GPIO (optional)
* @index: index of GpioIo/GpioInt resource (starting from %0)
* @info: info pointer to fill in (optional)
*
- * Function goes through ACPI resources for @dev and based on @index looks
+ * Function goes through ACPI resources for @adev and based on @index looks
* up a GpioIo/GpioInt resource, translates it to the Linux GPIO descriptor,
* and returns it. @index matches GpioIo/GpioInt resources only so if there
* are total %3 GPIO resources, the index goes from %0 to %2.
*
+ * If @propname is specified the GPIO is looked using device property. In
+ * that case @index is used to select the GPIO entry in the property value
+ * (in case of multiple).
+ *
* If the GPIO cannot be translated or there is an error an ERR_PTR is
* returned.
*
* Note: if the GPIO resource has multiple entries in the pin list, this
* function only returns the first.
*/
-struct gpio_desc *acpi_get_gpiod_by_index(struct device *dev, int index,
+struct gpio_desc *acpi_get_gpiod_by_index(struct acpi_device *adev,
+ const char *propname, int index,
struct acpi_gpio_info *info)
{
struct acpi_gpio_lookup lookup;
struct list_head resource_list;
- struct acpi_device *adev;
- acpi_handle handle;
+ bool active_low = false;
int ret;
- if (!dev)
- return ERR_PTR(-EINVAL);
-
- handle = ACPI_HANDLE(dev);
- if (!handle || acpi_bus_get_device(handle, &adev))
+ if (!adev)
return ERR_PTR(-ENODEV);
memset(&lookup, 0, sizeof(lookup));
lookup.index = index;
+ if (propname) {
+ struct acpi_reference_args args;
+
+ dev_dbg(&adev->dev, "GPIO: looking up %s\n", propname);
+
+ memset(&args, 0, sizeof(args));
+ ret = acpi_dev_get_property_reference(adev, propname,
+ index, &args);
+ if (ret) {
+ bool found = acpi_get_driver_gpio_data(adev, propname,
+ index, &args);
+ if (!found)
+ return ERR_PTR(ret);
+ }
+
+ /*
+ * The property was found and resolved so need to
+ * lookup the GPIO based on returned args instead.
+ */
+ adev = args.adev;
+ if (args.nargs >= 2) {
+ lookup.index = args.args[0];
+ lookup.pin_index = args.args[1];
+ /*
+ * 3rd argument, if present is used to
+ * specify active_low.
+ */
+ if (args.nargs >= 3)
+ active_low = !!args.args[2];
+ }
+
+ dev_dbg(&adev->dev, "GPIO: _DSD returned %s %zd %llu %llu %llu\n",
+ dev_name(&adev->dev), args.nargs,
+ args.args[0], args.args[1], args.args[2]);
+ } else {
+ dev_dbg(&adev->dev, "GPIO: looking up %d in _CRS\n", index);
+ }
+
INIT_LIST_HEAD(&resource_list);
ret = acpi_dev_get_resources(adev, &resource_list, acpi_find_gpio,
&lookup);
@@ -359,8 +445,11 @@ struct gpio_desc *acpi_get_gpiod_by_index(struct device *dev, int index,
acpi_dev_free_resource_list(&resource_list);
- if (lookup.desc && info)
+ if (lookup.desc && info) {
*info = lookup.info;
+ if (active_low)
+ info->active_low = active_low;
+ }
return lookup.desc ? lookup.desc : ERR_PTR(-ENOENT);
}
diff --git a/drivers/gpio/gpiolib.c b/drivers/gpio/gpiolib.c
index e8e98ca25ec7..58659dbe702a 100644
--- a/drivers/gpio/gpiolib.c
+++ b/drivers/gpio/gpiolib.c
@@ -1505,14 +1505,36 @@ static struct gpio_desc *acpi_find_gpio(struct device *dev, const char *con_id,
unsigned int idx,
enum gpio_lookup_flags *flags)
{
+ static const char * const suffixes[] = { "gpios", "gpio" };
+ struct acpi_device *adev = ACPI_COMPANION(dev);
struct acpi_gpio_info info;
struct gpio_desc *desc;
+ char propname[32];
+ int i;
- desc = acpi_get_gpiod_by_index(dev, idx, &info);
- if (IS_ERR(desc))
- return desc;
+ /* Try first from _DSD */
+ for (i = 0; i < ARRAY_SIZE(suffixes); i++) {
+ if (con_id && strcmp(con_id, "gpios")) {
+ snprintf(propname, sizeof(propname), "%s-%s",
+ con_id, suffixes[i]);
+ } else {
+ snprintf(propname, sizeof(propname), "%s",
+ suffixes[i]);
+ }
+
+ desc = acpi_get_gpiod_by_index(adev, propname, idx, &info);
+ if (!IS_ERR(desc) || (PTR_ERR(desc) == -EPROBE_DEFER))
+ break;
+ }
- if (info.gpioint && info.active_low)
+ /* Then from plain _CRS GPIOs */
+ if (IS_ERR(desc)) {
+ desc = acpi_get_gpiod_by_index(adev, NULL, idx, &info);
+ if (IS_ERR(desc))
+ return desc;
+ }
+
+ if (info.active_low)
*flags |= GPIO_ACTIVE_LOW;
return desc;
@@ -1713,6 +1735,61 @@ struct gpio_desc *__must_check __gpiod_get_index(struct device *dev,
EXPORT_SYMBOL_GPL(__gpiod_get_index);
/**
+ * fwnode_get_named_gpiod - obtain a GPIO from firmware node
+ * @fwnode: handle of the firmware node
+ * @propname: name of the firmware property representing the GPIO
+ *
+ * This function can be used for drivers that get their configuration
+ * from firmware.
+ *
+ * Function properly finds the corresponding GPIO using whatever is the
+ * underlying firmware interface and then makes sure that the GPIO
+ * descriptor is requested before it is returned to the caller.
+ *
+ * In case of error an ERR_PTR() is returned.
+ */
+struct gpio_desc *fwnode_get_named_gpiod(struct fwnode_handle *fwnode,
+ const char *propname)
+{
+ struct gpio_desc *desc = ERR_PTR(-ENODEV);
+ bool active_low = false;
+ int ret;
+
+ if (!fwnode)
+ return ERR_PTR(-EINVAL);
+
+ if (is_of_node(fwnode)) {
+ enum of_gpio_flags flags;
+
+ desc = of_get_named_gpiod_flags(of_node(fwnode), propname, 0,
+ &flags);
+ if (!IS_ERR(desc))
+ active_low = flags & OF_GPIO_ACTIVE_LOW;
+ } else if (is_acpi_node(fwnode)) {
+ struct acpi_gpio_info info;
+
+ desc = acpi_get_gpiod_by_index(acpi_node(fwnode), propname, 0,
+ &info);
+ if (!IS_ERR(desc))
+ active_low = info.active_low;
+ }
+
+ if (IS_ERR(desc))
+ return desc;
+
+ ret = gpiod_request(desc, NULL);
+ if (ret)
+ return ERR_PTR(ret);
+
+ /* Only value flag can be set from both DT and ACPI is active_low */
+ if (active_low)
+ set_bit(FLAG_ACTIVE_LOW, &desc->flags);
+
+ return desc;
+}
+EXPORT_SYMBOL_GPL(fwnode_get_named_gpiod);
+
+/**
* gpiod_get_index_optional - obtain an optional GPIO from a multi-index GPIO
* function
* @dev: GPIO consumer, can be NULL for system-global GPIOs
diff --git a/drivers/gpio/gpiolib.h b/drivers/gpio/gpiolib.h
index 9db2b6a71c5d..e3a52113a541 100644
--- a/drivers/gpio/gpiolib.h
+++ b/drivers/gpio/gpiolib.h
@@ -34,7 +34,8 @@ void acpi_gpiochip_remove(struct gpio_chip *chip);
void acpi_gpiochip_request_interrupts(struct gpio_chip *chip);
void acpi_gpiochip_free_interrupts(struct gpio_chip *chip);
-struct gpio_desc *acpi_get_gpiod_by_index(struct device *dev, int index,
+struct gpio_desc *acpi_get_gpiod_by_index(struct acpi_device *adev,
+ const char *propname, int index,
struct acpi_gpio_info *info);
#else
static inline void acpi_gpiochip_add(struct gpio_chip *chip) { }
@@ -47,8 +48,8 @@ static inline void
acpi_gpiochip_free_interrupts(struct gpio_chip *chip) { }
static inline struct gpio_desc *
-acpi_get_gpiod_by_index(struct device *dev, int index,
- struct acpi_gpio_info *info)
+acpi_get_gpiod_by_index(struct acpi_device *adev, const char *propname,
+ int index, struct acpi_gpio_info *info)
{
return ERR_PTR(-ENOSYS);
}
diff --git a/drivers/gpu/drm/exynos/exynos_drm_fimc.c b/drivers/gpu/drm/exynos/exynos_drm_fimc.c
index 68d38eb6774d..835b6af00970 100644
--- a/drivers/gpu/drm/exynos/exynos_drm_fimc.c
+++ b/drivers/gpu/drm/exynos/exynos_drm_fimc.c
@@ -1817,7 +1817,7 @@ static int fimc_resume(struct device *dev)
}
#endif
-#ifdef CONFIG_PM_RUNTIME
+#ifdef CONFIG_PM
static int fimc_runtime_suspend(struct device *dev)
{
struct fimc_context *ctx = get_fimc_context(dev);
diff --git a/drivers/gpu/drm/exynos/exynos_drm_g2d.c b/drivers/gpu/drm/exynos/exynos_drm_g2d.c
index 6ff8599f6cbf..81a250830808 100644
--- a/drivers/gpu/drm/exynos/exynos_drm_g2d.c
+++ b/drivers/gpu/drm/exynos/exynos_drm_g2d.c
@@ -1540,7 +1540,7 @@ static int g2d_resume(struct device *dev)
}
#endif
-#ifdef CONFIG_PM_RUNTIME
+#ifdef CONFIG_PM
static int g2d_runtime_suspend(struct device *dev)
{
struct g2d_data *g2d = dev_get_drvdata(dev);
diff --git a/drivers/gpu/drm/exynos/exynos_drm_gsc.c b/drivers/gpu/drm/exynos/exynos_drm_gsc.c
index c6a013fc321c..0261468c8019 100644
--- a/drivers/gpu/drm/exynos/exynos_drm_gsc.c
+++ b/drivers/gpu/drm/exynos/exynos_drm_gsc.c
@@ -1764,7 +1764,7 @@ static int gsc_resume(struct device *dev)
}
#endif
-#ifdef CONFIG_PM_RUNTIME
+#ifdef CONFIG_PM
static int gsc_runtime_suspend(struct device *dev)
{
struct gsc_context *ctx = get_gsc_context(dev);
diff --git a/drivers/gpu/drm/exynos/exynos_drm_rotator.c b/drivers/gpu/drm/exynos/exynos_drm_rotator.c
index b6a37d4f5b13..425e70625388 100644
--- a/drivers/gpu/drm/exynos/exynos_drm_rotator.c
+++ b/drivers/gpu/drm/exynos/exynos_drm_rotator.c
@@ -822,7 +822,7 @@ static int rotator_resume(struct device *dev)
}
#endif
-#ifdef CONFIG_PM_RUNTIME
+#ifdef CONFIG_PM
static int rotator_runtime_suspend(struct device *dev)
{
struct rot_context *rot = dev_get_drvdata(dev);
diff --git a/drivers/hid/i2c-hid/i2c-hid.c b/drivers/hid/i2c-hid/i2c-hid.c
index 747d54421e73..f09e70cafaf1 100644
--- a/drivers/hid/i2c-hid/i2c-hid.c
+++ b/drivers/hid/i2c-hid/i2c-hid.c
@@ -1095,7 +1095,7 @@ static int i2c_hid_resume(struct device *dev)
}
#endif
-#ifdef CONFIG_PM_RUNTIME
+#ifdef CONFIG_PM
static int i2c_hid_runtime_suspend(struct device *dev)
{
struct i2c_client *client = to_i2c_client(dev);
diff --git a/drivers/hsi/controllers/omap_ssi.c b/drivers/hsi/controllers/omap_ssi.c
index bf0eace4cb67..4d5b682fc6af 100644
--- a/drivers/hsi/controllers/omap_ssi.c
+++ b/drivers/hsi/controllers/omap_ssi.c
@@ -555,7 +555,7 @@ static int __exit ssi_remove(struct platform_device *pd)
return 0;
}
-#ifdef CONFIG_PM_RUNTIME
+#ifdef CONFIG_PM
static int omap_ssi_runtime_suspend(struct device *dev)
{
struct hsi_controller *ssi = dev_get_drvdata(dev);
diff --git a/drivers/hsi/controllers/omap_ssi_port.c b/drivers/hsi/controllers/omap_ssi_port.c
index 4c0b5820581e..d836cfe50513 100644
--- a/drivers/hsi/controllers/omap_ssi_port.c
+++ b/drivers/hsi/controllers/omap_ssi_port.c
@@ -1260,7 +1260,7 @@ static int __exit ssi_port_remove(struct platform_device *pd)
return 0;
}
-#ifdef CONFIG_PM_RUNTIME
+#ifdef CONFIG_PM
static int ssi_save_port_ctx(struct omap_ssi_port *omap_port)
{
struct hsi_port *port = to_hsi_port(omap_port->dev);
diff --git a/drivers/i2c/busses/i2c-hix5hd2.c b/drivers/i2c/busses/i2c-hix5hd2.c
index 9490d0f4255c..8fe78d08e01c 100644
--- a/drivers/i2c/busses/i2c-hix5hd2.c
+++ b/drivers/i2c/busses/i2c-hix5hd2.c
@@ -528,7 +528,7 @@ static int hix5hd2_i2c_runtime_resume(struct device *dev)
#endif
static const struct dev_pm_ops hix5hd2_i2c_pm_ops = {
- SET_PM_RUNTIME_PM_OPS(hix5hd2_i2c_runtime_suspend,
+ SET_RUNTIME_PM_OPS(hix5hd2_i2c_runtime_suspend,
hix5hd2_i2c_runtime_resume,
NULL)
};
diff --git a/drivers/i2c/busses/i2c-nomadik.c b/drivers/i2c/busses/i2c-nomadik.c
index 9ad038d223c4..97998946c4f6 100644
--- a/drivers/i2c/busses/i2c-nomadik.c
+++ b/drivers/i2c/busses/i2c-nomadik.c
@@ -932,7 +932,7 @@ static int nmk_i2c_runtime_resume(struct device *dev)
static const struct dev_pm_ops nmk_i2c_pm = {
SET_LATE_SYSTEM_SLEEP_PM_OPS(nmk_i2c_suspend_late, nmk_i2c_resume_early)
- SET_PM_RUNTIME_PM_OPS(nmk_i2c_runtime_suspend,
+ SET_RUNTIME_PM_OPS(nmk_i2c_runtime_suspend,
nmk_i2c_runtime_resume,
NULL)
};
diff --git a/drivers/i2c/busses/i2c-omap.c b/drivers/i2c/busses/i2c-omap.c
index 277a2288d4a8..0e650a0d0ad0 100644
--- a/drivers/i2c/busses/i2c-omap.c
+++ b/drivers/i2c/busses/i2c-omap.c
@@ -1280,7 +1280,6 @@ static int omap_i2c_remove(struct platform_device *pdev)
}
#ifdef CONFIG_PM
-#ifdef CONFIG_PM_RUNTIME
static int omap_i2c_runtime_suspend(struct device *dev)
{
struct platform_device *pdev = to_platform_device(dev);
@@ -1318,7 +1317,6 @@ static int omap_i2c_runtime_resume(struct device *dev)
return 0;
}
-#endif /* CONFIG_PM_RUNTIME */
static struct dev_pm_ops omap_i2c_pm_ops = {
SET_RUNTIME_PM_OPS(omap_i2c_runtime_suspend,
diff --git a/drivers/i2c/i2c-core.c b/drivers/i2c/i2c-core.c
index f43b4e11647a..68aeb8eedae0 100644
--- a/drivers/i2c/i2c-core.c
+++ b/drivers/i2c/i2c-core.c
@@ -403,6 +403,7 @@ static int acpi_i2c_install_space_handler(struct i2c_adapter *adapter)
return -ENOMEM;
}
+ acpi_walk_dep_device_list(handle);
return 0;
}
diff --git a/drivers/idle/intel_idle.c b/drivers/idle/intel_idle.c
index 9b7ee7e427df..9cceacb92f9d 100644
--- a/drivers/idle/intel_idle.c
+++ b/drivers/idle/intel_idle.c
@@ -128,28 +128,28 @@ static struct cpuidle_state nehalem_cstates[] = {
{
.name = "C1-NHM",
.desc = "MWAIT 0x00",
- .flags = MWAIT2flg(0x00) | CPUIDLE_FLAG_TIME_VALID,
+ .flags = MWAIT2flg(0x00),
.exit_latency = 3,
.target_residency = 6,
.enter = &intel_idle },
{
.name = "C1E-NHM",
.desc = "MWAIT 0x01",
- .flags = MWAIT2flg(0x01) | CPUIDLE_FLAG_TIME_VALID,
+ .flags = MWAIT2flg(0x01),
.exit_latency = 10,
.target_residency = 20,
.enter = &intel_idle },
{
.name = "C3-NHM",
.desc = "MWAIT 0x10",
- .flags = MWAIT2flg(0x10) | CPUIDLE_FLAG_TIME_VALID | CPUIDLE_FLAG_TLB_FLUSHED,
+ .flags = MWAIT2flg(0x10) | CPUIDLE_FLAG_TLB_FLUSHED,
.exit_latency = 20,
.target_residency = 80,
.enter = &intel_idle },
{
.name = "C6-NHM",
.desc = "MWAIT 0x20",
- .flags = MWAIT2flg(0x20) | CPUIDLE_FLAG_TIME_VALID | CPUIDLE_FLAG_TLB_FLUSHED,
+ .flags = MWAIT2flg(0x20) | CPUIDLE_FLAG_TLB_FLUSHED,
.exit_latency = 200,
.target_residency = 800,
.enter = &intel_idle },
@@ -161,35 +161,35 @@ static struct cpuidle_state snb_cstates[] = {
{
.name = "C1-SNB",
.desc = "MWAIT 0x00",
- .flags = MWAIT2flg(0x00) | CPUIDLE_FLAG_TIME_VALID,
+ .flags = MWAIT2flg(0x00),
.exit_latency = 2,
.target_residency = 2,
.enter = &intel_idle },
{
.name = "C1E-SNB",
.desc = "MWAIT 0x01",
- .flags = MWAIT2flg(0x01) | CPUIDLE_FLAG_TIME_VALID,
+ .flags = MWAIT2flg(0x01),
.exit_latency = 10,
.target_residency = 20,
.enter = &intel_idle },
{
.name = "C3-SNB",
.desc = "MWAIT 0x10",
- .flags = MWAIT2flg(0x10) | CPUIDLE_FLAG_TIME_VALID | CPUIDLE_FLAG_TLB_FLUSHED,
+ .flags = MWAIT2flg(0x10) | CPUIDLE_FLAG_TLB_FLUSHED,
.exit_latency = 80,
.target_residency = 211,
.enter = &intel_idle },
{
.name = "C6-SNB",
.desc = "MWAIT 0x20",
- .flags = MWAIT2flg(0x20) | CPUIDLE_FLAG_TIME_VALID | CPUIDLE_FLAG_TLB_FLUSHED,
+ .flags = MWAIT2flg(0x20) | CPUIDLE_FLAG_TLB_FLUSHED,
.exit_latency = 104,
.target_residency = 345,
.enter = &intel_idle },
{
.name = "C7-SNB",
.desc = "MWAIT 0x30",
- .flags = MWAIT2flg(0x30) | CPUIDLE_FLAG_TIME_VALID | CPUIDLE_FLAG_TLB_FLUSHED,
+ .flags = MWAIT2flg(0x30) | CPUIDLE_FLAG_TLB_FLUSHED,
.exit_latency = 109,
.target_residency = 345,
.enter = &intel_idle },
@@ -201,42 +201,42 @@ static struct cpuidle_state byt_cstates[] = {
{
.name = "C1-BYT",
.desc = "MWAIT 0x00",
- .flags = MWAIT2flg(0x00) | CPUIDLE_FLAG_TIME_VALID,
+ .flags = MWAIT2flg(0x00),
.exit_latency = 1,
.target_residency = 1,
.enter = &intel_idle },
{
.name = "C1E-BYT",
.desc = "MWAIT 0x01",
- .flags = MWAIT2flg(0x01) | CPUIDLE_FLAG_TIME_VALID,
+ .flags = MWAIT2flg(0x01),
.exit_latency = 15,
.target_residency = 30,
.enter = &intel_idle },
{
.name = "C6N-BYT",
.desc = "MWAIT 0x58",
- .flags = MWAIT2flg(0x58) | CPUIDLE_FLAG_TIME_VALID | CPUIDLE_FLAG_TLB_FLUSHED,
+ .flags = MWAIT2flg(0x58) | CPUIDLE_FLAG_TLB_FLUSHED,
.exit_latency = 40,
.target_residency = 275,
.enter = &intel_idle },
{
.name = "C6S-BYT",
.desc = "MWAIT 0x52",
- .flags = MWAIT2flg(0x52) | CPUIDLE_FLAG_TIME_VALID | CPUIDLE_FLAG_TLB_FLUSHED,
+ .flags = MWAIT2flg(0x52) | CPUIDLE_FLAG_TLB_FLUSHED,
.exit_latency = 140,
.target_residency = 560,
.enter = &intel_idle },
{
.name = "C7-BYT",
.desc = "MWAIT 0x60",
- .flags = MWAIT2flg(0x60) | CPUIDLE_FLAG_TIME_VALID | CPUIDLE_FLAG_TLB_FLUSHED,
+ .flags = MWAIT2flg(0x60) | CPUIDLE_FLAG_TLB_FLUSHED,
.exit_latency = 1200,
.target_residency = 1500,
.enter = &intel_idle },
{
.name = "C7S-BYT",
.desc = "MWAIT 0x64",
- .flags = MWAIT2flg(0x64) | CPUIDLE_FLAG_TIME_VALID | CPUIDLE_FLAG_TLB_FLUSHED,
+ .flags = MWAIT2flg(0x64) | CPUIDLE_FLAG_TLB_FLUSHED,
.exit_latency = 10000,
.target_residency = 20000,
.enter = &intel_idle },
@@ -248,35 +248,35 @@ static struct cpuidle_state ivb_cstates[] = {
{
.name = "C1-IVB",
.desc = "MWAIT 0x00",
- .flags = MWAIT2flg(0x00) | CPUIDLE_FLAG_TIME_VALID,
+ .flags = MWAIT2flg(0x00),
.exit_latency = 1,
.target_residency = 1,
.enter = &intel_idle },
{
.name = "C1E-IVB",
.desc = "MWAIT 0x01",
- .flags = MWAIT2flg(0x01) | CPUIDLE_FLAG_TIME_VALID,
+ .flags = MWAIT2flg(0x01),
.exit_latency = 10,
.target_residency = 20,
.enter = &intel_idle },
{
.name = "C3-IVB",
.desc = "MWAIT 0x10",
- .flags = MWAIT2flg(0x10) | CPUIDLE_FLAG_TIME_VALID | CPUIDLE_FLAG_TLB_FLUSHED,
+ .flags = MWAIT2flg(0x10) | CPUIDLE_FLAG_TLB_FLUSHED,
.exit_latency = 59,
.target_residency = 156,
.enter = &intel_idle },
{
.name = "C6-IVB",
.desc = "MWAIT 0x20",
- .flags = MWAIT2flg(0x20) | CPUIDLE_FLAG_TIME_VALID | CPUIDLE_FLAG_TLB_FLUSHED,
+ .flags = MWAIT2flg(0x20) | CPUIDLE_FLAG_TLB_FLUSHED,
.exit_latency = 80,
.target_residency = 300,
.enter = &intel_idle },
{
.name = "C7-IVB",
.desc = "MWAIT 0x30",
- .flags = MWAIT2flg(0x30) | CPUIDLE_FLAG_TIME_VALID | CPUIDLE_FLAG_TLB_FLUSHED,
+ .flags = MWAIT2flg(0x30) | CPUIDLE_FLAG_TLB_FLUSHED,
.exit_latency = 87,
.target_residency = 300,
.enter = &intel_idle },
@@ -288,28 +288,28 @@ static struct cpuidle_state ivt_cstates[] = {
{
.name = "C1-IVT",
.desc = "MWAIT 0x00",
- .flags = MWAIT2flg(0x00) | CPUIDLE_FLAG_TIME_VALID,
+ .flags = MWAIT2flg(0x00),
.exit_latency = 1,
.target_residency = 1,
.enter = &intel_idle },
{
.name = "C1E-IVT",
.desc = "MWAIT 0x01",
- .flags = MWAIT2flg(0x01) | CPUIDLE_FLAG_TIME_VALID,
+ .flags = MWAIT2flg(0x01),
.exit_latency = 10,
.target_residency = 80,
.enter = &intel_idle },
{
.name = "C3-IVT",
.desc = "MWAIT 0x10",
- .flags = MWAIT2flg(0x10) | CPUIDLE_FLAG_TIME_VALID | CPUIDLE_FLAG_TLB_FLUSHED,
+ .flags = MWAIT2flg(0x10) | CPUIDLE_FLAG_TLB_FLUSHED,
.exit_latency = 59,
.target_residency = 156,
.enter = &intel_idle },
{
.name = "C6-IVT",
.desc = "MWAIT 0x20",
- .flags = MWAIT2flg(0x20) | CPUIDLE_FLAG_TIME_VALID | CPUIDLE_FLAG_TLB_FLUSHED,
+ .flags = MWAIT2flg(0x20) | CPUIDLE_FLAG_TLB_FLUSHED,
.exit_latency = 82,
.target_residency = 300,
.enter = &intel_idle },
@@ -321,28 +321,28 @@ static struct cpuidle_state ivt_cstates_4s[] = {
{
.name = "C1-IVT-4S",
.desc = "MWAIT 0x00",
- .flags = MWAIT2flg(0x00) | CPUIDLE_FLAG_TIME_VALID,
+ .flags = MWAIT2flg(0x00),
.exit_latency = 1,
.target_residency = 1,
.enter = &intel_idle },
{
.name = "C1E-IVT-4S",
.desc = "MWAIT 0x01",
- .flags = MWAIT2flg(0x01) | CPUIDLE_FLAG_TIME_VALID,
+ .flags = MWAIT2flg(0x01),
.exit_latency = 10,
.target_residency = 250,
.enter = &intel_idle },
{
.name = "C3-IVT-4S",
.desc = "MWAIT 0x10",
- .flags = MWAIT2flg(0x10) | CPUIDLE_FLAG_TIME_VALID | CPUIDLE_FLAG_TLB_FLUSHED,
+ .flags = MWAIT2flg(0x10) | CPUIDLE_FLAG_TLB_FLUSHED,
.exit_latency = 59,
.target_residency = 300,
.enter = &intel_idle },
{
.name = "C6-IVT-4S",
.desc = "MWAIT 0x20",
- .flags = MWAIT2flg(0x20) | CPUIDLE_FLAG_TIME_VALID | CPUIDLE_FLAG_TLB_FLUSHED,
+ .flags = MWAIT2flg(0x20) | CPUIDLE_FLAG_TLB_FLUSHED,
.exit_latency = 84,
.target_residency = 400,
.enter = &intel_idle },
@@ -354,28 +354,28 @@ static struct cpuidle_state ivt_cstates_8s[] = {
{
.name = "C1-IVT-8S",
.desc = "MWAIT 0x00",
- .flags = MWAIT2flg(0x00) | CPUIDLE_FLAG_TIME_VALID,
+ .flags = MWAIT2flg(0x00),
.exit_latency = 1,
.target_residency = 1,
.enter = &intel_idle },
{
.name = "C1E-IVT-8S",
.desc = "MWAIT 0x01",
- .flags = MWAIT2flg(0x01) | CPUIDLE_FLAG_TIME_VALID,
+ .flags = MWAIT2flg(0x01),
.exit_latency = 10,
.target_residency = 500,
.enter = &intel_idle },
{
.name = "C3-IVT-8S",
.desc = "MWAIT 0x10",
- .flags = MWAIT2flg(0x10) | CPUIDLE_FLAG_TIME_VALID | CPUIDLE_FLAG_TLB_FLUSHED,
+ .flags = MWAIT2flg(0x10) | CPUIDLE_FLAG_TLB_FLUSHED,
.exit_latency = 59,
.target_residency = 600,
.enter = &intel_idle },
{
.name = "C6-IVT-8S",
.desc = "MWAIT 0x20",
- .flags = MWAIT2flg(0x20) | CPUIDLE_FLAG_TIME_VALID | CPUIDLE_FLAG_TLB_FLUSHED,
+ .flags = MWAIT2flg(0x20) | CPUIDLE_FLAG_TLB_FLUSHED,
.exit_latency = 88,
.target_residency = 700,
.enter = &intel_idle },
@@ -387,56 +387,56 @@ static struct cpuidle_state hsw_cstates[] = {
{
.name = "C1-HSW",
.desc = "MWAIT 0x00",
- .flags = MWAIT2flg(0x00) | CPUIDLE_FLAG_TIME_VALID,
+ .flags = MWAIT2flg(0x00),
.exit_latency = 2,
.target_residency = 2,
.enter = &intel_idle },
{
.name = "C1E-HSW",
.desc = "MWAIT 0x01",
- .flags = MWAIT2flg(0x01) | CPUIDLE_FLAG_TIME_VALID,
+ .flags = MWAIT2flg(0x01),
.exit_latency = 10,
.target_residency = 20,
.enter = &intel_idle },
{
.name = "C3-HSW",
.desc = "MWAIT 0x10",
- .flags = MWAIT2flg(0x10) | CPUIDLE_FLAG_TIME_VALID | CPUIDLE_FLAG_TLB_FLUSHED,
+ .flags = MWAIT2flg(0x10) | CPUIDLE_FLAG_TLB_FLUSHED,
.exit_latency = 33,
.target_residency = 100,
.enter = &intel_idle },
{
.name = "C6-HSW",
.desc = "MWAIT 0x20",
- .flags = MWAIT2flg(0x20) | CPUIDLE_FLAG_TIME_VALID | CPUIDLE_FLAG_TLB_FLUSHED,
+ .flags = MWAIT2flg(0x20) | CPUIDLE_FLAG_TLB_FLUSHED,
.exit_latency = 133,
.target_residency = 400,
.enter = &intel_idle },
{
.name = "C7s-HSW",
.desc = "MWAIT 0x32",
- .flags = MWAIT2flg(0x32) | CPUIDLE_FLAG_TIME_VALID | CPUIDLE_FLAG_TLB_FLUSHED,
+ .flags = MWAIT2flg(0x32) | CPUIDLE_FLAG_TLB_FLUSHED,
.exit_latency = 166,
.target_residency = 500,
.enter = &intel_idle },
{
.name = "C8-HSW",
.desc = "MWAIT 0x40",
- .flags = MWAIT2flg(0x40) | CPUIDLE_FLAG_TIME_VALID | CPUIDLE_FLAG_TLB_FLUSHED,
+ .flags = MWAIT2flg(0x40) | CPUIDLE_FLAG_TLB_FLUSHED,
.exit_latency = 300,
.target_residency = 900,
.enter = &intel_idle },
{
.name = "C9-HSW",
.desc = "MWAIT 0x50",
- .flags = MWAIT2flg(0x50) | CPUIDLE_FLAG_TIME_VALID | CPUIDLE_FLAG_TLB_FLUSHED,
+ .flags = MWAIT2flg(0x50) | CPUIDLE_FLAG_TLB_FLUSHED,
.exit_latency = 600,
.target_residency = 1800,
.enter = &intel_idle },
{
.name = "C10-HSW",
.desc = "MWAIT 0x60",
- .flags = MWAIT2flg(0x60) | CPUIDLE_FLAG_TIME_VALID | CPUIDLE_FLAG_TLB_FLUSHED,
+ .flags = MWAIT2flg(0x60) | CPUIDLE_FLAG_TLB_FLUSHED,
.exit_latency = 2600,
.target_residency = 7700,
.enter = &intel_idle },
@@ -447,56 +447,56 @@ static struct cpuidle_state bdw_cstates[] = {
{
.name = "C1-BDW",
.desc = "MWAIT 0x00",
- .flags = MWAIT2flg(0x00) | CPUIDLE_FLAG_TIME_VALID,
+ .flags = MWAIT2flg(0x00),
.exit_latency = 2,
.target_residency = 2,
.enter = &intel_idle },
{
.name = "C1E-BDW",
.desc = "MWAIT 0x01",
- .flags = MWAIT2flg(0x01) | CPUIDLE_FLAG_TIME_VALID,
+ .flags = MWAIT2flg(0x01),
.exit_latency = 10,
.target_residency = 20,
.enter = &intel_idle },
{
.name = "C3-BDW",
.desc = "MWAIT 0x10",
- .flags = MWAIT2flg(0x10) | CPUIDLE_FLAG_TIME_VALID | CPUIDLE_FLAG_TLB_FLUSHED,
+ .flags = MWAIT2flg(0x10) | CPUIDLE_FLAG_TLB_FLUSHED,
.exit_latency = 40,
.target_residency = 100,
.enter = &intel_idle },
{
.name = "C6-BDW",
.desc = "MWAIT 0x20",
- .flags = MWAIT2flg(0x20) | CPUIDLE_FLAG_TIME_VALID | CPUIDLE_FLAG_TLB_FLUSHED,
+ .flags = MWAIT2flg(0x20) | CPUIDLE_FLAG_TLB_FLUSHED,
.exit_latency = 133,
.target_residency = 400,
.enter = &intel_idle },
{
.name = "C7s-BDW",
.desc = "MWAIT 0x32",
- .flags = MWAIT2flg(0x32) | CPUIDLE_FLAG_TIME_VALID | CPUIDLE_FLAG_TLB_FLUSHED,
+ .flags = MWAIT2flg(0x32) | CPUIDLE_FLAG_TLB_FLUSHED,
.exit_latency = 166,
.target_residency = 500,
.enter = &intel_idle },
{
.name = "C8-BDW",
.desc = "MWAIT 0x40",
- .flags = MWAIT2flg(0x40) | CPUIDLE_FLAG_TIME_VALID | CPUIDLE_FLAG_TLB_FLUSHED,
+ .flags = MWAIT2flg(0x40) | CPUIDLE_FLAG_TLB_FLUSHED,
.exit_latency = 300,
.target_residency = 900,
.enter = &intel_idle },
{
.name = "C9-BDW",
.desc = "MWAIT 0x50",
- .flags = MWAIT2flg(0x50) | CPUIDLE_FLAG_TIME_VALID | CPUIDLE_FLAG_TLB_FLUSHED,
+ .flags = MWAIT2flg(0x50) | CPUIDLE_FLAG_TLB_FLUSHED,
.exit_latency = 600,
.target_residency = 1800,
.enter = &intel_idle },
{
.name = "C10-BDW",
.desc = "MWAIT 0x60",
- .flags = MWAIT2flg(0x60) | CPUIDLE_FLAG_TIME_VALID | CPUIDLE_FLAG_TLB_FLUSHED,
+ .flags = MWAIT2flg(0x60) | CPUIDLE_FLAG_TLB_FLUSHED,
.exit_latency = 2600,
.target_residency = 7700,
.enter = &intel_idle },
@@ -508,28 +508,28 @@ static struct cpuidle_state atom_cstates[] = {
{
.name = "C1E-ATM",
.desc = "MWAIT 0x00",
- .flags = MWAIT2flg(0x00) | CPUIDLE_FLAG_TIME_VALID,
+ .flags = MWAIT2flg(0x00),
.exit_latency = 10,
.target_residency = 20,
.enter = &intel_idle },
{
.name = "C2-ATM",
.desc = "MWAIT 0x10",
- .flags = MWAIT2flg(0x10) | CPUIDLE_FLAG_TIME_VALID,
+ .flags = MWAIT2flg(0x10),
.exit_latency = 20,
.target_residency = 80,
.enter = &intel_idle },
{
.name = "C4-ATM",
.desc = "MWAIT 0x30",
- .flags = MWAIT2flg(0x30) | CPUIDLE_FLAG_TIME_VALID | CPUIDLE_FLAG_TLB_FLUSHED,
+ .flags = MWAIT2flg(0x30) | CPUIDLE_FLAG_TLB_FLUSHED,
.exit_latency = 100,
.target_residency = 400,
.enter = &intel_idle },
{
.name = "C6-ATM",
.desc = "MWAIT 0x52",
- .flags = MWAIT2flg(0x52) | CPUIDLE_FLAG_TIME_VALID | CPUIDLE_FLAG_TLB_FLUSHED,
+ .flags = MWAIT2flg(0x52) | CPUIDLE_FLAG_TLB_FLUSHED,
.exit_latency = 140,
.target_residency = 560,
.enter = &intel_idle },
@@ -540,14 +540,14 @@ static struct cpuidle_state avn_cstates[] = {
{
.name = "C1-AVN",
.desc = "MWAIT 0x00",
- .flags = MWAIT2flg(0x00) | CPUIDLE_FLAG_TIME_VALID,
+ .flags = MWAIT2flg(0x00),
.exit_latency = 2,
.target_residency = 2,
.enter = &intel_idle },
{
.name = "C6-AVN",
.desc = "MWAIT 0x51",
- .flags = MWAIT2flg(0x51) | CPUIDLE_FLAG_TIME_VALID | CPUIDLE_FLAG_TLB_FLUSHED,
+ .flags = MWAIT2flg(0x51) | CPUIDLE_FLAG_TLB_FLUSHED,
.exit_latency = 15,
.target_residency = 45,
.enter = &intel_idle },
diff --git a/drivers/iio/accel/bmc150-accel.c b/drivers/iio/accel/bmc150-accel.c
index 513bd6d14293..066d0c04072c 100644
--- a/drivers/iio/accel/bmc150-accel.c
+++ b/drivers/iio/accel/bmc150-accel.c
@@ -513,7 +513,7 @@ static int bmc150_accel_get_bw(struct bmc150_accel_data *data, int *val,
return -EINVAL;
}
-#ifdef CONFIG_PM_RUNTIME
+#ifdef CONFIG_PM
static int bmc150_accel_get_startup_times(struct bmc150_accel_data *data)
{
int i;
@@ -1371,7 +1371,7 @@ static int bmc150_accel_resume(struct device *dev)
}
#endif
-#ifdef CONFIG_PM_RUNTIME
+#ifdef CONFIG_PM
static int bmc150_accel_runtime_suspend(struct device *dev)
{
struct iio_dev *indio_dev = i2c_get_clientdata(to_i2c_client(dev));
diff --git a/drivers/iio/accel/kxcjk-1013.c b/drivers/iio/accel/kxcjk-1013.c
index 320aa72c0349..da2fe93739a2 100644
--- a/drivers/iio/accel/kxcjk-1013.c
+++ b/drivers/iio/accel/kxcjk-1013.c
@@ -360,7 +360,7 @@ static int kxcjk1013_chip_init(struct kxcjk1013_data *data)
return 0;
}
-#ifdef CONFIG_PM_RUNTIME
+#ifdef CONFIG_PM
static int kxcjk1013_get_startup_times(struct kxcjk1013_data *data)
{
int i;
@@ -1359,7 +1359,7 @@ static int kxcjk1013_resume(struct device *dev)
}
#endif
-#ifdef CONFIG_PM_RUNTIME
+#ifdef CONFIG_PM
static int kxcjk1013_runtime_suspend(struct device *dev)
{
struct iio_dev *indio_dev = i2c_get_clientdata(to_i2c_client(dev));
diff --git a/drivers/iio/gyro/bmg160.c b/drivers/iio/gyro/bmg160.c
index d2fa526740ca..60451b328242 100644
--- a/drivers/iio/gyro/bmg160.c
+++ b/drivers/iio/gyro/bmg160.c
@@ -256,7 +256,7 @@ static int bmg160_chip_init(struct bmg160_data *data)
static int bmg160_set_power_state(struct bmg160_data *data, bool on)
{
-#ifdef CONFIG_PM_RUNTIME
+#ifdef CONFIG_PM
int ret;
if (on)
@@ -1202,7 +1202,7 @@ static int bmg160_resume(struct device *dev)
}
#endif
-#ifdef CONFIG_PM_RUNTIME
+#ifdef CONFIG_PM
static int bmg160_runtime_suspend(struct device *dev)
{
struct iio_dev *indio_dev = i2c_get_clientdata(to_i2c_client(dev));
diff --git a/drivers/input/keyboard/gpio_keys_polled.c b/drivers/input/keyboard/gpio_keys_polled.c
index 432d36395f35..c9c1c8ca7267 100644
--- a/drivers/input/keyboard/gpio_keys_polled.c
+++ b/drivers/input/keyboard/gpio_keys_polled.c
@@ -23,10 +23,9 @@
#include <linux/ioport.h>
#include <linux/platform_device.h>
#include <linux/gpio.h>
+#include <linux/gpio/consumer.h>
#include <linux/gpio_keys.h>
-#include <linux/of.h>
-#include <linux/of_platform.h>
-#include <linux/of_gpio.h>
+#include <linux/property.h>
#define DRV_NAME "gpio-keys-polled"
@@ -51,15 +50,14 @@ static void gpio_keys_polled_check_state(struct input_dev *input,
int state;
if (bdata->can_sleep)
- state = !!gpio_get_value_cansleep(button->gpio);
+ state = !!gpiod_get_value_cansleep(button->gpiod);
else
- state = !!gpio_get_value(button->gpio);
+ state = !!gpiod_get_value(button->gpiod);
if (state != bdata->last_state) {
unsigned int type = button->type ?: EV_KEY;
- input_event(input, type, button->code,
- !!(state ^ button->active_low));
+ input_event(input, type, button->code, state);
input_sync(input);
bdata->count = 0;
bdata->last_state = state;
@@ -102,21 +100,15 @@ static void gpio_keys_polled_close(struct input_polled_dev *dev)
pdata->disable(bdev->dev);
}
-#ifdef CONFIG_OF
static struct gpio_keys_platform_data *gpio_keys_polled_get_devtree_pdata(struct device *dev)
{
- struct device_node *node, *pp;
struct gpio_keys_platform_data *pdata;
struct gpio_keys_button *button;
+ struct fwnode_handle *child;
int error;
int nbuttons;
- int i;
-
- node = dev->of_node;
- if (!node)
- return NULL;
- nbuttons = of_get_child_count(node);
+ nbuttons = device_get_child_node_count(dev);
if (nbuttons == 0)
return NULL;
@@ -126,52 +118,44 @@ static struct gpio_keys_platform_data *gpio_keys_polled_get_devtree_pdata(struct
return ERR_PTR(-ENOMEM);
pdata->buttons = (struct gpio_keys_button *)(pdata + 1);
- pdata->nbuttons = nbuttons;
- pdata->rep = !!of_get_property(node, "autorepeat", NULL);
- of_property_read_u32(node, "poll-interval", &pdata->poll_interval);
+ pdata->rep = device_property_present(dev, "autorepeat");
+ device_property_read_u32(dev, "poll-interval", &pdata->poll_interval);
- i = 0;
- for_each_child_of_node(node, pp) {
- int gpio;
- enum of_gpio_flags flags;
+ device_for_each_child_node(dev, child) {
+ struct gpio_desc *desc;
- if (!of_find_property(pp, "gpios", NULL)) {
- pdata->nbuttons--;
- dev_warn(dev, "Found button without gpios\n");
- continue;
- }
-
- gpio = of_get_gpio_flags(pp, 0, &flags);
- if (gpio < 0) {
- error = gpio;
+ desc = devm_get_gpiod_from_child(dev, child);
+ if (IS_ERR(desc)) {
+ error = PTR_ERR(desc);
if (error != -EPROBE_DEFER)
dev_err(dev,
"Failed to get gpio flags, error: %d\n",
error);
+ fwnode_handle_put(child);
return ERR_PTR(error);
}
- button = &pdata->buttons[i++];
-
- button->gpio = gpio;
- button->active_low = flags & OF_GPIO_ACTIVE_LOW;
+ button = &pdata->buttons[pdata->nbuttons++];
+ button->gpiod = desc;
- if (of_property_read_u32(pp, "linux,code", &button->code)) {
- dev_err(dev, "Button without keycode: 0x%x\n",
- button->gpio);
+ if (fwnode_property_read_u32(child, "linux,code", &button->code)) {
+ dev_err(dev, "Button without keycode: %d\n",
+ pdata->nbuttons - 1);
+ fwnode_handle_put(child);
return ERR_PTR(-EINVAL);
}
- button->desc = of_get_property(pp, "label", NULL);
+ fwnode_property_read_string(child, "label", &button->desc);
- if (of_property_read_u32(pp, "linux,input-type", &button->type))
+ if (fwnode_property_read_u32(child, "linux,input-type",
+ &button->type))
button->type = EV_KEY;
- button->wakeup = !!of_get_property(pp, "gpio-key,wakeup", NULL);
+ button->wakeup = fwnode_property_present(child, "gpio-key,wakeup");
- if (of_property_read_u32(pp, "debounce-interval",
- &button->debounce_interval))
+ if (fwnode_property_read_u32(child, "debounce-interval",
+ &button->debounce_interval))
button->debounce_interval = 5;
}
@@ -187,15 +171,6 @@ static const struct of_device_id gpio_keys_polled_of_match[] = {
};
MODULE_DEVICE_TABLE(of, gpio_keys_polled_of_match);
-#else
-
-static inline struct gpio_keys_platform_data *
-gpio_keys_polled_get_devtree_pdata(struct device *dev)
-{
- return NULL;
-}
-#endif
-
static int gpio_keys_polled_probe(struct platform_device *pdev)
{
struct device *dev = &pdev->dev;
@@ -259,7 +234,6 @@ static int gpio_keys_polled_probe(struct platform_device *pdev)
for (i = 0; i < pdata->nbuttons; i++) {
struct gpio_keys_button *button = &pdata->buttons[i];
struct gpio_keys_button_data *bdata = &bdev->data[i];
- unsigned int gpio = button->gpio;
unsigned int type = button->type ?: EV_KEY;
if (button->wakeup) {
@@ -267,15 +241,31 @@ static int gpio_keys_polled_probe(struct platform_device *pdev)
return -EINVAL;
}
- error = devm_gpio_request_one(&pdev->dev, gpio, GPIOF_IN,
- button->desc ? : DRV_NAME);
- if (error) {
- dev_err(dev, "unable to claim gpio %u, err=%d\n",
- gpio, error);
- return error;
+ /*
+ * Legacy GPIO number so request the GPIO here and
+ * convert it to descriptor.
+ */
+ if (!button->gpiod && gpio_is_valid(button->gpio)) {
+ unsigned flags = 0;
+
+ if (button->active_low)
+ flags |= GPIOF_ACTIVE_LOW;
+
+ error = devm_gpio_request_one(&pdev->dev, button->gpio,
+ flags, button->desc ? : DRV_NAME);
+ if (error) {
+ dev_err(dev, "unable to claim gpio %u, err=%d\n",
+ button->gpio, error);
+ return error;
+ }
+
+ button->gpiod = gpio_to_desc(button->gpio);
}
- bdata->can_sleep = gpio_cansleep(gpio);
+ if (IS_ERR(button->gpiod))
+ return PTR_ERR(button->gpiod);
+
+ bdata->can_sleep = gpiod_cansleep(button->gpiod);
bdata->last_state = -1;
bdata->threshold = DIV_ROUND_UP(button->debounce_interval,
pdata->poll_interval);
@@ -308,7 +298,7 @@ static struct platform_driver gpio_keys_polled_driver = {
.driver = {
.name = DRV_NAME,
.owner = THIS_MODULE,
- .of_match_table = of_match_ptr(gpio_keys_polled_of_match),
+ .of_match_table = gpio_keys_polled_of_match,
},
};
module_platform_driver(gpio_keys_polled_driver);
diff --git a/drivers/input/keyboard/samsung-keypad.c b/drivers/input/keyboard/samsung-keypad.c
index 5e80fbf7b5ed..c994e3bbd776 100644
--- a/drivers/input/keyboard/samsung-keypad.c
+++ b/drivers/input/keyboard/samsung-keypad.c
@@ -463,7 +463,7 @@ static int samsung_keypad_remove(struct platform_device *pdev)
return 0;
}
-#ifdef CONFIG_PM_RUNTIME
+#ifdef CONFIG_PM
static int samsung_keypad_runtime_suspend(struct device *dev)
{
struct platform_device *pdev = to_platform_device(dev);
diff --git a/drivers/input/touchscreen/cyttsp4_core.c b/drivers/input/touchscreen/cyttsp4_core.c
index a035a390f8e2..568a3d340c8a 100644
--- a/drivers/input/touchscreen/cyttsp4_core.c
+++ b/drivers/input/touchscreen/cyttsp4_core.c
@@ -1716,7 +1716,7 @@ static void cyttsp4_free_si_ptrs(struct cyttsp4 *cd)
kfree(si->btn_rec_data);
}
-#if defined(CONFIG_PM_SLEEP) || defined(CONFIG_PM_RUNTIME)
+#ifdef CONFIG_PM
static int cyttsp4_core_sleep(struct cyttsp4 *cd)
{
int rc;
diff --git a/drivers/leds/leds-gpio.c b/drivers/leds/leds-gpio.c
index b4518c8751c8..868e6fc17cba 100644
--- a/drivers/leds/leds-gpio.c
+++ b/drivers/leds/leds-gpio.c
@@ -12,25 +12,23 @@
*/
#include <linux/err.h>
#include <linux/gpio.h>
+#include <linux/gpio/consumer.h>
#include <linux/kernel.h>
#include <linux/leds.h>
#include <linux/module.h>
-#include <linux/of.h>
-#include <linux/of_gpio.h>
-#include <linux/of_platform.h>
#include <linux/platform_device.h>
+#include <linux/property.h>
#include <linux/slab.h>
#include <linux/workqueue.h>
struct gpio_led_data {
struct led_classdev cdev;
- unsigned gpio;
+ struct gpio_desc *gpiod;
struct work_struct work;
u8 new_level;
u8 can_sleep;
- u8 active_low;
u8 blinking;
- int (*platform_gpio_blink_set)(unsigned gpio, int state,
+ int (*platform_gpio_blink_set)(struct gpio_desc *desc, int state,
unsigned long *delay_on, unsigned long *delay_off);
};
@@ -40,12 +38,11 @@ static void gpio_led_work(struct work_struct *work)
container_of(work, struct gpio_led_data, work);
if (led_dat->blinking) {
- led_dat->platform_gpio_blink_set(led_dat->gpio,
- led_dat->new_level,
- NULL, NULL);
+ led_dat->platform_gpio_blink_set(led_dat->gpiod,
+ led_dat->new_level, NULL, NULL);
led_dat->blinking = 0;
} else
- gpio_set_value_cansleep(led_dat->gpio, led_dat->new_level);
+ gpiod_set_value_cansleep(led_dat->gpiod, led_dat->new_level);
}
static void gpio_led_set(struct led_classdev *led_cdev,
@@ -60,9 +57,6 @@ static void gpio_led_set(struct led_classdev *led_cdev,
else
level = 1;
- if (led_dat->active_low)
- level = !level;
-
/* Setting GPIOs with I2C/etc requires a task context, and we don't
* seem to have a reliable way to know if we're already in one; so
* let's just assume the worst.
@@ -72,11 +66,11 @@ static void gpio_led_set(struct led_classdev *led_cdev,
schedule_work(&led_dat->work);
} else {
if (led_dat->blinking) {
- led_dat->platform_gpio_blink_set(led_dat->gpio, level,
+ led_dat->platform_gpio_blink_set(led_dat->gpiod, level,
NULL, NULL);
led_dat->blinking = 0;
} else
- gpio_set_value(led_dat->gpio, level);
+ gpiod_set_value(led_dat->gpiod, level);
}
}
@@ -87,34 +81,49 @@ static int gpio_blink_set(struct led_classdev *led_cdev,
container_of(led_cdev, struct gpio_led_data, cdev);
led_dat->blinking = 1;
- return led_dat->platform_gpio_blink_set(led_dat->gpio, GPIO_LED_BLINK,
+ return led_dat->platform_gpio_blink_set(led_dat->gpiod, GPIO_LED_BLINK,
delay_on, delay_off);
}
static int create_gpio_led(const struct gpio_led *template,
struct gpio_led_data *led_dat, struct device *parent,
- int (*blink_set)(unsigned, int, unsigned long *, unsigned long *))
+ int (*blink_set)(struct gpio_desc *, int, unsigned long *,
+ unsigned long *))
{
int ret, state;
- led_dat->gpio = -1;
+ led_dat->gpiod = template->gpiod;
+ if (!led_dat->gpiod) {
+ /*
+ * This is the legacy code path for platform code that
+ * still uses GPIO numbers. Ultimately we would like to get
+ * rid of this block completely.
+ */
+ unsigned long flags = 0;
+
+ /* skip leds that aren't available */
+ if (!gpio_is_valid(template->gpio)) {
+ dev_info(parent, "Skipping unavailable LED gpio %d (%s)\n",
+ template->gpio, template->name);
+ return 0;
+ }
- /* skip leds that aren't available */
- if (!gpio_is_valid(template->gpio)) {
- dev_info(parent, "Skipping unavailable LED gpio %d (%s)\n",
- template->gpio, template->name);
- return 0;
- }
+ if (template->active_low)
+ flags |= GPIOF_ACTIVE_LOW;
- ret = devm_gpio_request(parent, template->gpio, template->name);
- if (ret < 0)
- return ret;
+ ret = devm_gpio_request_one(parent, template->gpio, flags,
+ template->name);
+ if (ret < 0)
+ return ret;
+
+ led_dat->gpiod = gpio_to_desc(template->gpio);
+ if (IS_ERR(led_dat->gpiod))
+ return PTR_ERR(led_dat->gpiod);
+ }
led_dat->cdev.name = template->name;
led_dat->cdev.default_trigger = template->default_trigger;
- led_dat->gpio = template->gpio;
- led_dat->can_sleep = gpio_cansleep(template->gpio);
- led_dat->active_low = template->active_low;
+ led_dat->can_sleep = gpiod_cansleep(led_dat->gpiod);
led_dat->blinking = 0;
if (blink_set) {
led_dat->platform_gpio_blink_set = blink_set;
@@ -122,30 +131,24 @@ static int create_gpio_led(const struct gpio_led *template,
}
led_dat->cdev.brightness_set = gpio_led_set;
if (template->default_state == LEDS_GPIO_DEFSTATE_KEEP)
- state = !!gpio_get_value_cansleep(led_dat->gpio) ^ led_dat->active_low;
+ state = !!gpiod_get_value_cansleep(led_dat->gpiod);
else
state = (template->default_state == LEDS_GPIO_DEFSTATE_ON);
led_dat->cdev.brightness = state ? LED_FULL : LED_OFF;
if (!template->retain_state_suspended)
led_dat->cdev.flags |= LED_CORE_SUSPENDRESUME;
- ret = gpio_direction_output(led_dat->gpio, led_dat->active_low ^ state);
+ ret = gpiod_direction_output(led_dat->gpiod, state);
if (ret < 0)
return ret;
INIT_WORK(&led_dat->work, gpio_led_work);
- ret = led_classdev_register(parent, &led_dat->cdev);
- if (ret < 0)
- return ret;
-
- return 0;
+ return led_classdev_register(parent, &led_dat->cdev);
}
static void delete_gpio_led(struct gpio_led_data *led)
{
- if (!gpio_is_valid(led->gpio))
- return;
led_classdev_unregister(&led->cdev);
cancel_work_sync(&led->work);
}
@@ -161,40 +164,47 @@ static inline int sizeof_gpio_leds_priv(int num_leds)
(sizeof(struct gpio_led_data) * num_leds);
}
-/* Code to create from OpenFirmware platform devices */
-#ifdef CONFIG_OF_GPIO
-static struct gpio_leds_priv *gpio_leds_create_of(struct platform_device *pdev)
+static struct gpio_leds_priv *gpio_leds_create(struct platform_device *pdev)
{
- struct device_node *np = pdev->dev.of_node, *child;
+ struct device *dev = &pdev->dev;
+ struct fwnode_handle *child;
struct gpio_leds_priv *priv;
int count, ret;
+ struct device_node *np;
- /* count LEDs in this device, so we know how much to allocate */
- count = of_get_available_child_count(np);
+ count = device_get_child_node_count(dev);
if (!count)
return ERR_PTR(-ENODEV);
- for_each_available_child_of_node(np, child)
- if (of_get_gpio(child, 0) == -EPROBE_DEFER)
- return ERR_PTR(-EPROBE_DEFER);
-
- priv = devm_kzalloc(&pdev->dev, sizeof_gpio_leds_priv(count),
- GFP_KERNEL);
+ priv = devm_kzalloc(dev, sizeof_gpio_leds_priv(count), GFP_KERNEL);
if (!priv)
return ERR_PTR(-ENOMEM);
- for_each_available_child_of_node(np, child) {
+ device_for_each_child_node(dev, child) {
struct gpio_led led = {};
- enum of_gpio_flags flags;
- const char *state;
-
- led.gpio = of_get_gpio_flags(child, 0, &flags);
- led.active_low = flags & OF_GPIO_ACTIVE_LOW;
- led.name = of_get_property(child, "label", NULL) ? : child->name;
- led.default_trigger =
- of_get_property(child, "linux,default-trigger", NULL);
- state = of_get_property(child, "default-state", NULL);
- if (state) {
+ const char *state = NULL;
+
+ led.gpiod = devm_get_gpiod_from_child(dev, child);
+ if (IS_ERR(led.gpiod)) {
+ fwnode_handle_put(child);
+ goto err;
+ }
+
+ np = of_node(child);
+
+ if (fwnode_property_present(child, "label")) {
+ fwnode_property_read_string(child, "label", &led.name);
+ } else {
+ if (IS_ENABLED(CONFIG_OF) && !led.name && np)
+ led.name = np->name;
+ if (!led.name)
+ return ERR_PTR(-EINVAL);
+ }
+ fwnode_property_read_string(child, "linux,default-trigger",
+ &led.default_trigger);
+
+ if (!fwnode_property_read_string(child, "linux,default_state",
+ &state)) {
if (!strcmp(state, "keep"))
led.default_state = LEDS_GPIO_DEFSTATE_KEEP;
else if (!strcmp(state, "on"))
@@ -203,13 +213,13 @@ static struct gpio_leds_priv *gpio_leds_create_of(struct platform_device *pdev)
led.default_state = LEDS_GPIO_DEFSTATE_OFF;
}
- if (of_get_property(child, "retain-state-suspended", NULL))
+ if (fwnode_property_present(child, "retain-state-suspended"))
led.retain_state_suspended = 1;
ret = create_gpio_led(&led, &priv->leds[priv->num_leds++],
- &pdev->dev, NULL);
+ dev, NULL);
if (ret < 0) {
- of_node_put(child);
+ fwnode_handle_put(child);
goto err;
}
}
@@ -228,12 +238,6 @@ static const struct of_device_id of_gpio_leds_match[] = {
};
MODULE_DEVICE_TABLE(of, of_gpio_leds_match);
-#else /* CONFIG_OF_GPIO */
-static struct gpio_leds_priv *gpio_leds_create_of(struct platform_device *pdev)
-{
- return ERR_PTR(-ENODEV);
-}
-#endif /* CONFIG_OF_GPIO */
static int gpio_led_probe(struct platform_device *pdev)
{
@@ -261,7 +265,7 @@ static int gpio_led_probe(struct platform_device *pdev)
}
}
} else {
- priv = gpio_leds_create_of(pdev);
+ priv = gpio_leds_create(pdev);
if (IS_ERR(priv))
return PTR_ERR(priv);
}
@@ -288,7 +292,7 @@ static struct platform_driver gpio_led_driver = {
.driver = {
.name = "leds-gpio",
.owner = THIS_MODULE,
- .of_match_table = of_match_ptr(of_gpio_leds_match),
+ .of_match_table = of_gpio_leds_match,
},
};
diff --git a/drivers/media/platform/coda/coda-common.c b/drivers/media/platform/coda/coda-common.c
index ced47609f5ef..5f0cd5cafea2 100644
--- a/drivers/media/platform/coda/coda-common.c
+++ b/drivers/media/platform/coda/coda-common.c
@@ -1980,7 +1980,7 @@ static int coda_probe(struct platform_device *pdev)
/*
* Start activated so we can directly call coda_hw_init in
- * coda_fw_callback regardless of whether CONFIG_PM_RUNTIME is
+ * coda_fw_callback regardless of whether CONFIG_PM is
* enabled or whether the device is associated with a PM domain.
*/
pm_runtime_get_noresume(&pdev->dev);
@@ -2013,7 +2013,7 @@ static int coda_remove(struct platform_device *pdev)
return 0;
}
-#ifdef CONFIG_PM_RUNTIME
+#ifdef CONFIG_PM
static int coda_runtime_resume(struct device *dev)
{
struct coda_dev *cdev = dev_get_drvdata(dev);
diff --git a/drivers/media/platform/exynos4-is/fimc-core.c b/drivers/media/platform/exynos4-is/fimc-core.c
index aee92d908e49..f5d85520caf3 100644
--- a/drivers/media/platform/exynos4-is/fimc-core.c
+++ b/drivers/media/platform/exynos4-is/fimc-core.c
@@ -832,7 +832,7 @@ err:
return -ENXIO;
}
-#if defined(CONFIG_PM_RUNTIME) || defined(CONFIG_PM_SLEEP)
+#ifdef CONFIG_PM
static int fimc_m2m_suspend(struct fimc_dev *fimc)
{
unsigned long flags;
@@ -871,7 +871,7 @@ static int fimc_m2m_resume(struct fimc_dev *fimc)
return 0;
}
-#endif /* CONFIG_PM_RUNTIME || CONFIG_PM_SLEEP */
+#endif /* CONFIG_PM */
static const struct of_device_id fimc_of_match[];
@@ -1039,7 +1039,7 @@ err_sclk:
return ret;
}
-#ifdef CONFIG_PM_RUNTIME
+#ifdef CONFIG_PM
static int fimc_runtime_resume(struct device *dev)
{
struct fimc_dev *fimc = dev_get_drvdata(dev);
diff --git a/drivers/media/platform/exynos4-is/fimc-is-i2c.c b/drivers/media/platform/exynos4-is/fimc-is-i2c.c
index 371cad4fcce9..d83033170789 100644
--- a/drivers/media/platform/exynos4-is/fimc-is-i2c.c
+++ b/drivers/media/platform/exynos4-is/fimc-is-i2c.c
@@ -81,7 +81,7 @@ static int fimc_is_i2c_remove(struct platform_device *pdev)
return 0;
}
-#if defined(CONFIG_PM_RUNTIME) || defined(CONFIG_PM_SLEEP)
+#ifdef CONFIG_PM
static int fimc_is_i2c_runtime_suspend(struct device *dev)
{
struct fimc_is_i2c *isp_i2c = dev_get_drvdata(dev);
diff --git a/drivers/media/platform/exynos4-is/fimc-lite.c b/drivers/media/platform/exynos4-is/fimc-lite.c
index a97d2352f1d7..6c1eb308f7b5 100644
--- a/drivers/media/platform/exynos4-is/fimc-lite.c
+++ b/drivers/media/platform/exynos4-is/fimc-lite.c
@@ -1588,7 +1588,7 @@ err_clk_put:
return ret;
}
-#ifdef CONFIG_PM_RUNTIME
+#ifdef CONFIG_PM
static int fimc_lite_runtime_resume(struct device *dev)
{
struct fimc_lite *fimc = dev_get_drvdata(dev);
diff --git a/drivers/media/platform/exynos4-is/mipi-csis.c b/drivers/media/platform/exynos4-is/mipi-csis.c
index db6fd14d1936..be5d6fc895cb 100644
--- a/drivers/media/platform/exynos4-is/mipi-csis.c
+++ b/drivers/media/platform/exynos4-is/mipi-csis.c
@@ -978,7 +978,7 @@ static int s5pcsis_resume(struct device *dev)
}
#endif
-#ifdef CONFIG_PM_RUNTIME
+#ifdef CONFIG_PM
static int s5pcsis_runtime_suspend(struct device *dev)
{
return s5pcsis_pm_suspend(dev, true);
diff --git a/drivers/media/platform/s5p-jpeg/jpeg-core.c b/drivers/media/platform/s5p-jpeg/jpeg-core.c
index 6fcc7f072ace..fe2727413f3a 100644
--- a/drivers/media/platform/s5p-jpeg/jpeg-core.c
+++ b/drivers/media/platform/s5p-jpeg/jpeg-core.c
@@ -2632,7 +2632,7 @@ static int s5p_jpeg_remove(struct platform_device *pdev)
return 0;
}
-#if defined(CONFIG_PM_RUNTIME) || defined(CONFIG_PM_SLEEP)
+#ifdef CONFIG_PM
static int s5p_jpeg_runtime_suspend(struct device *dev)
{
struct s5p_jpeg *jpeg = dev_get_drvdata(dev);
@@ -2682,7 +2682,7 @@ static int s5p_jpeg_runtime_resume(struct device *dev)
return 0;
}
-#endif /* CONFIG_PM_RUNTIME || CONFIG_PM_SLEEP */
+#endif /* CONFIG_PM */
#ifdef CONFIG_PM_SLEEP
static int s5p_jpeg_suspend(struct device *dev)
diff --git a/drivers/media/platform/s5p-mfc/s5p_mfc.c b/drivers/media/platform/s5p-mfc/s5p_mfc.c
index 165bc86c5962..363fd8c0a699 100644
--- a/drivers/media/platform/s5p-mfc/s5p_mfc.c
+++ b/drivers/media/platform/s5p-mfc/s5p_mfc.c
@@ -1302,7 +1302,7 @@ static int s5p_mfc_resume(struct device *dev)
}
#endif
-#ifdef CONFIG_PM_RUNTIME
+#ifdef CONFIG_PM
static int s5p_mfc_runtime_suspend(struct device *dev)
{
struct platform_device *pdev = to_platform_device(dev);
diff --git a/drivers/media/platform/s5p-mfc/s5p_mfc_pm.c b/drivers/media/platform/s5p-mfc/s5p_mfc_pm.c
index 826c48945bf5..5f97a3398c11 100644
--- a/drivers/media/platform/s5p-mfc/s5p_mfc_pm.c
+++ b/drivers/media/platform/s5p-mfc/s5p_mfc_pm.c
@@ -13,9 +13,7 @@
#include <linux/clk.h>
#include <linux/err.h>
#include <linux/platform_device.h>
-#ifdef CONFIG_PM_RUNTIME
#include <linux/pm_runtime.h>
-#endif
#include "s5p_mfc_common.h"
#include "s5p_mfc_debug.h"
#include "s5p_mfc_pm.h"
@@ -67,7 +65,7 @@ int s5p_mfc_init_pm(struct s5p_mfc_dev *dev)
}
atomic_set(&pm->power, 0);
-#ifdef CONFIG_PM_RUNTIME
+#ifdef CONFIG_PM
pm->device = &dev->plat_dev->dev;
pm_runtime_enable(pm->device);
#endif
@@ -93,7 +91,7 @@ void s5p_mfc_final_pm(struct s5p_mfc_dev *dev)
}
clk_unprepare(pm->clock_gate);
clk_put(pm->clock_gate);
-#ifdef CONFIG_PM_RUNTIME
+#ifdef CONFIG_PM
pm_runtime_disable(pm->device);
#endif
}
@@ -120,7 +118,7 @@ void s5p_mfc_clock_off(void)
int s5p_mfc_power_on(void)
{
-#ifdef CONFIG_PM_RUNTIME
+#ifdef CONFIG_PM
return pm_runtime_get_sync(pm->device);
#else
atomic_set(&pm->power, 1);
@@ -130,7 +128,7 @@ int s5p_mfc_power_on(void)
int s5p_mfc_power_off(void)
{
-#ifdef CONFIG_PM_RUNTIME
+#ifdef CONFIG_PM
return pm_runtime_put_sync(pm->device);
#else
atomic_set(&pm->power, 0);
diff --git a/drivers/mfd/ab8500-gpadc.c b/drivers/mfd/ab8500-gpadc.c
index 36000f920981..8e3168d160b2 100644
--- a/drivers/mfd/ab8500-gpadc.c
+++ b/drivers/mfd/ab8500-gpadc.c
@@ -867,7 +867,7 @@ static void ab8500_gpadc_read_calibration_data(struct ab8500_gpadc *gpadc)
gpadc->cal_data[ADC_INPUT_VBAT].offset);
}
-#ifdef CONFIG_PM_RUNTIME
+#ifdef CONFIG_PM
static int ab8500_gpadc_runtime_suspend(struct device *dev)
{
struct ab8500_gpadc *gpadc = dev_get_drvdata(dev);
diff --git a/drivers/mfd/arizona-core.c b/drivers/mfd/arizona-core.c
index bce7c0784b6b..09ba8f186e6a 100644
--- a/drivers/mfd/arizona-core.c
+++ b/drivers/mfd/arizona-core.c
@@ -330,7 +330,7 @@ err_fll:
return err;
}
-#ifdef CONFIG_PM_RUNTIME
+#ifdef CONFIG_PM
static int arizona_runtime_resume(struct device *dev)
{
struct arizona *arizona = dev_get_drvdata(dev);
@@ -1024,7 +1024,7 @@ int arizona_dev_init(struct arizona *arizona)
goto err_irq;
}
-#ifdef CONFIG_PM_RUNTIME
+#ifdef CONFIG_PM
regulator_disable(arizona->dcvdd);
#endif
diff --git a/drivers/mfd/axp20x.c b/drivers/mfd/axp20x.c
index c522ee22b1c0..b1b580a88654 100644
--- a/drivers/mfd/axp20x.c
+++ b/drivers/mfd/axp20x.c
@@ -354,6 +354,9 @@ static struct mfd_cell axp288_cells[] = {
.num_resources = ARRAY_SIZE(axp288_battery_resources),
.resources = axp288_battery_resources,
},
+ {
+ .name = "axp288_pmic_acpi",
+ },
};
static struct axp20x_dev *axp20x_pm_power_off;
diff --git a/drivers/mfd/intel_soc_pmic_crc.c b/drivers/mfd/intel_soc_pmic_crc.c
index 7107cab832e6..c85e2ecb868a 100644
--- a/drivers/mfd/intel_soc_pmic_crc.c
+++ b/drivers/mfd/intel_soc_pmic_crc.c
@@ -106,6 +106,9 @@ static struct mfd_cell crystal_cove_dev[] = {
.num_resources = ARRAY_SIZE(gpio_resources),
.resources = gpio_resources,
},
+ {
+ .name = "crystal_cove_pmic",
+ },
};
static struct regmap_config crystal_cove_regmap_config = {
diff --git a/drivers/mfd/wm8994-core.c b/drivers/mfd/wm8994-core.c
index e6fab94e2c8a..6ca9d25cc3f0 100644
--- a/drivers/mfd/wm8994-core.c
+++ b/drivers/mfd/wm8994-core.c
@@ -116,7 +116,7 @@ static const char *wm8958_main_supplies[] = {
"SPKVDD2",
};
-#ifdef CONFIG_PM_RUNTIME
+#ifdef CONFIG_PM
static int wm8994_suspend(struct device *dev)
{
struct wm8994 *wm8994 = dev_get_drvdata(dev);
diff --git a/drivers/misc/apds990x.c b/drivers/misc/apds990x.c
index 868a30a1b417..3739ffa9cdf1 100644
--- a/drivers/misc/apds990x.c
+++ b/drivers/misc/apds990x.c
@@ -609,7 +609,7 @@ static int apds990x_detect(struct apds990x_chip *chip)
return ret;
}
-#if defined(CONFIG_PM) || defined(CONFIG_PM_RUNTIME)
+#ifdef CONFIG_PM
static int apds990x_chip_on(struct apds990x_chip *chip)
{
int err = regulator_bulk_enable(ARRAY_SIZE(chip->regs),
@@ -1237,7 +1237,7 @@ static int apds990x_resume(struct device *dev)
}
#endif
-#ifdef CONFIG_PM_RUNTIME
+#ifdef CONFIG_PM
static int apds990x_runtime_suspend(struct device *dev)
{
struct i2c_client *client = container_of(dev, struct i2c_client, dev);
diff --git a/drivers/misc/bh1770glc.c b/drivers/misc/bh1770glc.c
index 7b55f8a152d4..b756381b8250 100644
--- a/drivers/misc/bh1770glc.c
+++ b/drivers/misc/bh1770glc.c
@@ -1358,7 +1358,7 @@ static int bh1770_resume(struct device *dev)
}
#endif
-#ifdef CONFIG_PM_RUNTIME
+#ifdef CONFIG_PM
static int bh1770_runtime_suspend(struct device *dev)
{
struct i2c_client *client = container_of(dev, struct i2c_client, dev);
diff --git a/drivers/misc/eeprom/at25.c b/drivers/misc/eeprom/at25.c
index 634f72929e12..0a1af93ec638 100644
--- a/drivers/misc/eeprom/at25.c
+++ b/drivers/misc/eeprom/at25.c
@@ -18,7 +18,7 @@
#include <linux/spi/spi.h>
#include <linux/spi/eeprom.h>
-#include <linux/of.h>
+#include <linux/property.h>
/*
* NOTE: this is an *EEPROM* driver. The vagaries of product naming
@@ -301,35 +301,33 @@ static ssize_t at25_mem_write(struct memory_accessor *mem, const char *buf,
/*-------------------------------------------------------------------------*/
-static int at25_np_to_chip(struct device *dev,
- struct device_node *np,
- struct spi_eeprom *chip)
+static int at25_fw_to_chip(struct device *dev, struct spi_eeprom *chip)
{
u32 val;
memset(chip, 0, sizeof(*chip));
- strncpy(chip->name, np->name, sizeof(chip->name));
+ strncpy(chip->name, "at25", sizeof(chip->name));
- if (of_property_read_u32(np, "size", &val) == 0 ||
- of_property_read_u32(np, "at25,byte-len", &val) == 0) {
+ if (device_property_read_u32(dev, "size", &val) == 0 ||
+ device_property_read_u32(dev, "at25,byte-len", &val) == 0) {
chip->byte_len = val;
} else {
dev_err(dev, "Error: missing \"size\" property\n");
return -ENODEV;
}
- if (of_property_read_u32(np, "pagesize", &val) == 0 ||
- of_property_read_u32(np, "at25,page-size", &val) == 0) {
+ if (device_property_read_u32(dev, "pagesize", &val) == 0 ||
+ device_property_read_u32(dev, "at25,page-size", &val) == 0) {
chip->page_size = (u16)val;
} else {
dev_err(dev, "Error: missing \"pagesize\" property\n");
return -ENODEV;
}
- if (of_property_read_u32(np, "at25,addr-mode", &val) == 0) {
+ if (device_property_read_u32(dev, "at25,addr-mode", &val) == 0) {
chip->flags = (u16)val;
} else {
- if (of_property_read_u32(np, "address-width", &val)) {
+ if (device_property_read_u32(dev, "address-width", &val)) {
dev_err(dev,
"Error: missing \"address-width\" property\n");
return -ENODEV;
@@ -350,7 +348,7 @@ static int at25_np_to_chip(struct device *dev,
val);
return -ENODEV;
}
- if (of_find_property(np, "read-only", NULL))
+ if (device_property_present(dev, "read-only"))
chip->flags |= EE_READONLY;
}
return 0;
@@ -360,21 +358,15 @@ static int at25_probe(struct spi_device *spi)
{
struct at25_data *at25 = NULL;
struct spi_eeprom chip;
- struct device_node *np = spi->dev.of_node;
int err;
int sr;
int addrlen;
/* Chip description */
if (!spi->dev.platform_data) {
- if (np) {
- err = at25_np_to_chip(&spi->dev, np, &chip);
- if (err)
- return err;
- } else {
- dev_err(&spi->dev, "Error: no chip description\n");
- return -ENODEV;
- }
+ err = at25_fw_to_chip(&spi->dev, &chip);
+ if (err)
+ return err;
} else
chip = *(struct spi_eeprom *)spi->dev.platform_data;
diff --git a/drivers/misc/lis3lv02d/lis3lv02d_i2c.c b/drivers/misc/lis3lv02d/lis3lv02d_i2c.c
index d324f8a97b88..63fe096d4462 100644
--- a/drivers/misc/lis3lv02d/lis3lv02d_i2c.c
+++ b/drivers/misc/lis3lv02d/lis3lv02d_i2c.c
@@ -235,7 +235,7 @@ static int lis3lv02d_i2c_resume(struct device *dev)
}
#endif /* CONFIG_PM_SLEEP */
-#ifdef CONFIG_PM_RUNTIME
+#ifdef CONFIG_PM
static int lis3_i2c_runtime_suspend(struct device *dev)
{
struct i2c_client *client = container_of(dev, struct i2c_client, dev);
@@ -253,7 +253,7 @@ static int lis3_i2c_runtime_resume(struct device *dev)
lis3lv02d_poweron(lis3);
return 0;
}
-#endif /* CONFIG_PM_RUNTIME */
+#endif /* CONFIG_PM */
static const struct i2c_device_id lis3lv02d_id[] = {
{"lis3lv02d", LIS3LV02D},
diff --git a/drivers/misc/mei/mei_dev.h b/drivers/misc/mei/mei_dev.h
index 71744b16cc8c..61b04d7646f1 100644
--- a/drivers/misc/mei/mei_dev.h
+++ b/drivers/misc/mei/mei_dev.h
@@ -530,9 +530,9 @@ struct mei_device {
* Power Gating support
*/
enum mei_pg_event pg_event;
-#ifdef CONFIG_PM_RUNTIME
+#ifdef CONFIG_PM
struct dev_pm_domain pg_domain;
-#endif /* CONFIG_PM_RUNTIME */
+#endif /* CONFIG_PM */
unsigned char rd_msg_buf[MEI_RD_MSG_BUF_SIZE];
u32 rd_msg_hdr;
diff --git a/drivers/misc/mei/pci-me.c b/drivers/misc/mei/pci-me.c
index f3225b1643ab..cf20d397068a 100644
--- a/drivers/misc/mei/pci-me.c
+++ b/drivers/misc/mei/pci-me.c
@@ -89,13 +89,13 @@ static const struct pci_device_id mei_me_pci_tbl[] = {
MODULE_DEVICE_TABLE(pci, mei_me_pci_tbl);
-#ifdef CONFIG_PM_RUNTIME
+#ifdef CONFIG_PM
static inline void mei_me_set_pm_domain(struct mei_device *dev);
static inline void mei_me_unset_pm_domain(struct mei_device *dev);
#else
static inline void mei_me_set_pm_domain(struct mei_device *dev) {}
static inline void mei_me_unset_pm_domain(struct mei_device *dev) {}
-#endif /* CONFIG_PM_RUNTIME */
+#endif /* CONFIG_PM */
/**
* mei_me_quirk_probe - probe for devices that doesn't valid ME interface
@@ -357,7 +357,7 @@ static int mei_me_pci_resume(struct device *device)
}
#endif /* CONFIG_PM_SLEEP */
-#ifdef CONFIG_PM_RUNTIME
+#ifdef CONFIG_PM
static int mei_me_pm_runtime_idle(struct device *device)
{
struct pci_dev *pdev = to_pci_dev(device);
@@ -453,9 +453,7 @@ static inline void mei_me_unset_pm_domain(struct mei_device *dev)
/* stop using pm callbacks if any */
dev->dev->pm_domain = NULL;
}
-#endif /* CONFIG_PM_RUNTIME */
-#ifdef CONFIG_PM
static const struct dev_pm_ops mei_me_pm_ops = {
SET_SYSTEM_SLEEP_PM_OPS(mei_me_pci_suspend,
mei_me_pci_resume)
diff --git a/drivers/misc/mei/pci-txe.c b/drivers/misc/mei/pci-txe.c
index bee1c6fb7e75..1f572deacf54 100644
--- a/drivers/misc/mei/pci-txe.c
+++ b/drivers/misc/mei/pci-txe.c
@@ -42,13 +42,13 @@ static const struct pci_device_id mei_txe_pci_tbl[] = {
};
MODULE_DEVICE_TABLE(pci, mei_txe_pci_tbl);
-#ifdef CONFIG_PM_RUNTIME
+#ifdef CONFIG_PM
static inline void mei_txe_set_pm_domain(struct mei_device *dev);
static inline void mei_txe_unset_pm_domain(struct mei_device *dev);
#else
static inline void mei_txe_set_pm_domain(struct mei_device *dev) {}
static inline void mei_txe_unset_pm_domain(struct mei_device *dev) {}
-#endif /* CONFIG_PM_RUNTIME */
+#endif /* CONFIG_PM */
static void mei_txe_pci_iounmap(struct pci_dev *pdev, struct mei_txe_hw *hw)
{
@@ -295,7 +295,7 @@ static int mei_txe_pci_resume(struct device *device)
}
#endif /* CONFIG_PM_SLEEP */
-#ifdef CONFIG_PM_RUNTIME
+#ifdef CONFIG_PM
static int mei_txe_pm_runtime_idle(struct device *device)
{
struct pci_dev *pdev = to_pci_dev(device);
@@ -401,9 +401,7 @@ static inline void mei_txe_unset_pm_domain(struct mei_device *dev)
/* stop using pm callbacks if any */
dev->dev->pm_domain = NULL;
}
-#endif /* CONFIG_PM_RUNTIME */
-#ifdef CONFIG_PM
static const struct dev_pm_ops mei_txe_pm_ops = {
SET_SYSTEM_SLEEP_PM_OPS(mei_txe_pci_suspend,
mei_txe_pci_resume)
diff --git a/drivers/mmc/core/bus.c b/drivers/mmc/core/bus.c
index 5ca562ccfcf3..86d271148528 100644
--- a/drivers/mmc/core/bus.c
+++ b/drivers/mmc/core/bus.c
@@ -152,7 +152,7 @@ static int mmc_bus_resume(struct device *dev)
}
#endif
-#ifdef CONFIG_PM_RUNTIME
+#ifdef CONFIG_PM
static int mmc_runtime_suspend(struct device *dev)
{
struct mmc_card *card = mmc_dev_to_card(dev);
@@ -168,7 +168,7 @@ static int mmc_runtime_resume(struct device *dev)
return host->bus_ops->runtime_resume(host);
}
-#endif /* !CONFIG_PM_RUNTIME */
+#endif /* !CONFIG_PM */
static const struct dev_pm_ops mmc_bus_pm_ops = {
SET_RUNTIME_PM_OPS(mmc_runtime_suspend, mmc_runtime_resume, NULL)
diff --git a/drivers/mmc/host/mmci.c b/drivers/mmc/host/mmci.c
index 53bf7a4b5839..8232e9a02d40 100644
--- a/drivers/mmc/host/mmci.c
+++ b/drivers/mmc/host/mmci.c
@@ -1850,7 +1850,7 @@ static int mmci_runtime_resume(struct device *dev)
static const struct dev_pm_ops mmci_dev_pm_ops = {
SET_SYSTEM_SLEEP_PM_OPS(pm_runtime_force_suspend,
pm_runtime_force_resume)
- SET_PM_RUNTIME_PM_OPS(mmci_runtime_suspend, mmci_runtime_resume, NULL)
+ SET_RUNTIME_PM_OPS(mmci_runtime_suspend, mmci_runtime_resume, NULL)
};
static struct amba_id mmci_ids[] = {
diff --git a/drivers/mmc/host/sdhci-acpi.c b/drivers/mmc/host/sdhci-acpi.c
index daba49ac1242..c01eac7c8196 100644
--- a/drivers/mmc/host/sdhci-acpi.c
+++ b/drivers/mmc/host/sdhci-acpi.c
@@ -430,7 +430,7 @@ static int sdhci_acpi_resume(struct device *dev)
#endif
-#ifdef CONFIG_PM_RUNTIME
+#ifdef CONFIG_PM
static int sdhci_acpi_runtime_suspend(struct device *dev)
{
diff --git a/drivers/mmc/host/sdhci-esdhc-imx.c b/drivers/mmc/host/sdhci-esdhc-imx.c
index 12711ab51aed..af1f7c0f9545 100644
--- a/drivers/mmc/host/sdhci-esdhc-imx.c
+++ b/drivers/mmc/host/sdhci-esdhc-imx.c
@@ -1108,7 +1108,7 @@ static int sdhci_esdhc_imx_remove(struct platform_device *pdev)
pm_runtime_dont_use_autosuspend(&pdev->dev);
pm_runtime_disable(&pdev->dev);
- if (!IS_ENABLED(CONFIG_PM_RUNTIME)) {
+ if (!IS_ENABLED(CONFIG_PM)) {
clk_disable_unprepare(imx_data->clk_per);
clk_disable_unprepare(imx_data->clk_ipg);
clk_disable_unprepare(imx_data->clk_ahb);
@@ -1119,7 +1119,7 @@ static int sdhci_esdhc_imx_remove(struct platform_device *pdev)
return 0;
}
-#ifdef CONFIG_PM_RUNTIME
+#ifdef CONFIG_PM
static int sdhci_esdhc_runtime_suspend(struct device *dev)
{
struct sdhci_host *host = dev_get_drvdata(dev);
diff --git a/drivers/mmc/host/sdhci-pci.c b/drivers/mmc/host/sdhci-pci.c
index 95f73007fccf..03427755b902 100644
--- a/drivers/mmc/host/sdhci-pci.c
+++ b/drivers/mmc/host/sdhci-pci.c
@@ -134,7 +134,7 @@ static int pch_hc_probe_slot(struct sdhci_pci_slot *slot)
return 0;
}
-#ifdef CONFIG_PM_RUNTIME
+#ifdef CONFIG_PM
static irqreturn_t sdhci_pci_sd_cd(int irq, void *dev_id)
{
@@ -1276,15 +1276,6 @@ static int sdhci_pci_resume(struct device *dev)
return 0;
}
-#else /* CONFIG_PM */
-
-#define sdhci_pci_suspend NULL
-#define sdhci_pci_resume NULL
-
-#endif /* CONFIG_PM */
-
-#ifdef CONFIG_PM_RUNTIME
-
static int sdhci_pci_runtime_suspend(struct device *dev)
{
struct pci_dev *pdev = container_of(dev, struct pci_dev, dev);
@@ -1356,7 +1347,12 @@ static int sdhci_pci_runtime_idle(struct device *dev)
return 0;
}
-#endif
+#else /* CONFIG_PM */
+
+#define sdhci_pci_suspend NULL
+#define sdhci_pci_resume NULL
+
+#endif /* CONFIG_PM */
static const struct dev_pm_ops sdhci_pci_pm_ops = {
.suspend = sdhci_pci_suspend,
diff --git a/drivers/mmc/host/sdhci-pxav3.c b/drivers/mmc/host/sdhci-pxav3.c
index ad0badad0ebc..45238871192d 100644
--- a/drivers/mmc/host/sdhci-pxav3.c
+++ b/drivers/mmc/host/sdhci-pxav3.c
@@ -452,7 +452,7 @@ static int sdhci_pxav3_resume(struct device *dev)
}
#endif
-#ifdef CONFIG_PM_RUNTIME
+#ifdef CONFIG_PM
static int sdhci_pxav3_runtime_suspend(struct device *dev)
{
struct sdhci_host *host = dev_get_drvdata(dev);
diff --git a/drivers/mmc/host/sdhci-s3c.c b/drivers/mmc/host/sdhci-s3c.c
index 4f7a63213b33..c45b8932d843 100644
--- a/drivers/mmc/host/sdhci-s3c.c
+++ b/drivers/mmc/host/sdhci-s3c.c
@@ -615,7 +615,7 @@ static int sdhci_s3c_probe(struct platform_device *pdev)
goto err_req_regs;
}
-#ifdef CONFIG_PM_RUNTIME
+#ifdef CONFIG_PM
if (pdata->cd_type != S3C_SDHCI_CD_INTERNAL)
clk_disable_unprepare(sc->clk_io);
#endif
@@ -641,7 +641,7 @@ static int sdhci_s3c_remove(struct platform_device *pdev)
if (sc->ext_cd_irq)
free_irq(sc->ext_cd_irq, sc);
-#ifdef CONFIG_PM_RUNTIME
+#ifdef CONFIG_PM
if (sc->pdata->cd_type != S3C_SDHCI_CD_INTERNAL)
clk_prepare_enable(sc->clk_io);
#endif
@@ -673,7 +673,7 @@ static int sdhci_s3c_resume(struct device *dev)
}
#endif
-#ifdef CONFIG_PM_RUNTIME
+#ifdef CONFIG_PM
static int sdhci_s3c_runtime_suspend(struct device *dev)
{
struct sdhci_host *host = dev_get_drvdata(dev);
diff --git a/drivers/mmc/host/sdhci.c b/drivers/mmc/host/sdhci.c
index 73de62a58d70..cbb245b58538 100644
--- a/drivers/mmc/host/sdhci.c
+++ b/drivers/mmc/host/sdhci.c
@@ -54,7 +54,7 @@ static int sdhci_execute_tuning(struct mmc_host *mmc, u32 opcode);
static void sdhci_tuning_timer(unsigned long data);
static void sdhci_enable_preset_value(struct sdhci_host *host, bool enable);
-#ifdef CONFIG_PM_RUNTIME
+#ifdef CONFIG_PM
static int sdhci_runtime_pm_get(struct sdhci_host *host);
static int sdhci_runtime_pm_put(struct sdhci_host *host);
static void sdhci_runtime_pm_bus_on(struct sdhci_host *host);
@@ -2697,9 +2697,6 @@ int sdhci_resume_host(struct sdhci_host *host)
}
EXPORT_SYMBOL_GPL(sdhci_resume_host);
-#endif /* CONFIG_PM */
-
-#ifdef CONFIG_PM_RUNTIME
static int sdhci_runtime_pm_get(struct sdhci_host *host)
{
@@ -2800,7 +2797,7 @@ int sdhci_runtime_resume_host(struct sdhci_host *host)
}
EXPORT_SYMBOL_GPL(sdhci_runtime_resume_host);
-#endif
+#endif /* CONFIG_PM */
/*****************************************************************************\
* *
diff --git a/drivers/mmc/host/sdhci.h b/drivers/mmc/host/sdhci.h
index ddd31cda2370..41a2c34299ed 100644
--- a/drivers/mmc/host/sdhci.h
+++ b/drivers/mmc/host/sdhci.h
@@ -454,9 +454,6 @@ void sdhci_set_uhs_signaling(struct sdhci_host *host, unsigned timing);
extern int sdhci_suspend_host(struct sdhci_host *host);
extern int sdhci_resume_host(struct sdhci_host *host);
extern void sdhci_enable_irq_wakeups(struct sdhci_host *host);
-#endif
-
-#ifdef CONFIG_PM_RUNTIME
extern int sdhci_runtime_suspend_host(struct sdhci_host *host);
extern int sdhci_runtime_resume_host(struct sdhci_host *host);
#endif
diff --git a/drivers/mmc/host/sh_mobile_sdhi.c b/drivers/mmc/host/sh_mobile_sdhi.c
index a2e81a1ea6af..00c8ebdf8ec7 100644
--- a/drivers/mmc/host/sh_mobile_sdhi.c
+++ b/drivers/mmc/host/sh_mobile_sdhi.c
@@ -375,7 +375,7 @@ static int sh_mobile_sdhi_remove(struct platform_device *pdev)
static const struct dev_pm_ops tmio_mmc_dev_pm_ops = {
SET_SYSTEM_SLEEP_PM_OPS(pm_runtime_force_suspend,
pm_runtime_force_resume)
- SET_PM_RUNTIME_PM_OPS(tmio_mmc_host_runtime_suspend,
+ SET_RUNTIME_PM_OPS(tmio_mmc_host_runtime_suspend,
tmio_mmc_host_runtime_resume,
NULL)
};
diff --git a/drivers/mmc/host/tmio_mmc.c b/drivers/mmc/host/tmio_mmc.c
index 659028ddb8b1..2616fdfdbbeb 100644
--- a/drivers/mmc/host/tmio_mmc.c
+++ b/drivers/mmc/host/tmio_mmc.c
@@ -135,7 +135,7 @@ static int tmio_mmc_remove(struct platform_device *pdev)
static const struct dev_pm_ops tmio_mmc_dev_pm_ops = {
SET_SYSTEM_SLEEP_PM_OPS(tmio_mmc_suspend, tmio_mmc_resume)
- SET_PM_RUNTIME_PM_OPS(tmio_mmc_host_runtime_suspend,
+ SET_RUNTIME_PM_OPS(tmio_mmc_host_runtime_suspend,
tmio_mmc_host_runtime_resume,
NULL)
};
diff --git a/drivers/net/ethernet/intel/e1000e/netdev.c b/drivers/net/ethernet/intel/e1000e/netdev.c
index 247335d2c7ec..952ef7c434e8 100644
--- a/drivers/net/ethernet/intel/e1000e/netdev.c
+++ b/drivers/net/ethernet/intel/e1000e/netdev.c
@@ -6372,7 +6372,6 @@ static int e1000e_pm_resume(struct device *dev)
}
#endif /* CONFIG_PM_SLEEP */
-#ifdef CONFIG_PM_RUNTIME
static int e1000e_pm_runtime_idle(struct device *dev)
{
struct pci_dev *pdev = to_pci_dev(dev);
@@ -6432,7 +6431,6 @@ static int e1000e_pm_runtime_suspend(struct device *dev)
return 0;
}
-#endif /* CONFIG_PM_RUNTIME */
#endif /* CONFIG_PM */
static void e1000_shutdown(struct pci_dev *pdev)
diff --git a/drivers/net/ethernet/intel/igb/igb_main.c b/drivers/net/ethernet/intel/igb/igb_main.c
index 487cd9c4ac0d..b85880a6e4c4 100644
--- a/drivers/net/ethernet/intel/igb/igb_main.c
+++ b/drivers/net/ethernet/intel/igb/igb_main.c
@@ -186,11 +186,9 @@ static int igb_pci_enable_sriov(struct pci_dev *dev, int num_vfs);
static int igb_suspend(struct device *);
#endif
static int igb_resume(struct device *);
-#ifdef CONFIG_PM_RUNTIME
static int igb_runtime_suspend(struct device *dev);
static int igb_runtime_resume(struct device *dev);
static int igb_runtime_idle(struct device *dev);
-#endif
static const struct dev_pm_ops igb_pm_ops = {
SET_SYSTEM_SLEEP_PM_OPS(igb_suspend, igb_resume)
SET_RUNTIME_PM_OPS(igb_runtime_suspend, igb_runtime_resume,
@@ -7450,7 +7448,6 @@ static int igb_resume(struct device *dev)
return 0;
}
-#ifdef CONFIG_PM_RUNTIME
static int igb_runtime_idle(struct device *dev)
{
struct pci_dev *pdev = to_pci_dev(dev);
@@ -7487,8 +7484,7 @@ static int igb_runtime_resume(struct device *dev)
{
return igb_resume(dev);
}
-#endif /* CONFIG_PM_RUNTIME */
-#endif
+#endif /* CONFIG_PM */
static void igb_shutdown(struct pci_dev *pdev)
{
diff --git a/drivers/of/base.c b/drivers/of/base.c
index 3823edf2d012..4c2ccde42427 100644
--- a/drivers/of/base.c
+++ b/drivers/of/base.c
@@ -1250,6 +1250,39 @@ int of_property_read_u64(const struct device_node *np, const char *propname,
EXPORT_SYMBOL_GPL(of_property_read_u64);
/**
+ * of_property_read_u64_array - Find and read an array of 64 bit integers
+ * from a property.
+ *
+ * @np: device node from which the property value is to be read.
+ * @propname: name of the property to be searched.
+ * @out_values: pointer to return value, modified only if return value is 0.
+ * @sz: number of array elements to read
+ *
+ * Search for a property in a device node and read 64-bit value(s) from
+ * it. Returns 0 on success, -EINVAL if the property does not exist,
+ * -ENODATA if property does not have a value, and -EOVERFLOW if the
+ * property data isn't large enough.
+ *
+ * The out_values is modified only if a valid u64 value can be decoded.
+ */
+int of_property_read_u64_array(const struct device_node *np,
+ const char *propname, u64 *out_values,
+ size_t sz)
+{
+ const __be32 *val = of_find_property_value_of_size(np, propname,
+ (sz * sizeof(*out_values)));
+
+ if (IS_ERR(val))
+ return PTR_ERR(val);
+
+ while (sz--) {
+ *out_values++ = of_read_number(val, 2);
+ val += 2;
+ }
+ return 0;
+}
+
+/**
* of_property_read_string - Find and read a string from a property
* @np: device node from which the property value is to be read.
* @propname: name of the property to be searched.
diff --git a/drivers/pci/pci-driver.c b/drivers/pci/pci-driver.c
index 2b3c89425bb5..887e6bd95af7 100644
--- a/drivers/pci/pci-driver.c
+++ b/drivers/pci/pci-driver.c
@@ -1104,7 +1104,7 @@ static int pci_pm_restore(struct device *dev)
#endif /* !CONFIG_HIBERNATE_CALLBACKS */
-#ifdef CONFIG_PM_RUNTIME
+#ifdef CONFIG_PM
static int pci_pm_runtime_suspend(struct device *dev)
{
@@ -1200,16 +1200,6 @@ static int pci_pm_runtime_idle(struct device *dev)
return ret;
}
-#else /* !CONFIG_PM_RUNTIME */
-
-#define pci_pm_runtime_suspend NULL
-#define pci_pm_runtime_resume NULL
-#define pci_pm_runtime_idle NULL
-
-#endif /* !CONFIG_PM_RUNTIME */
-
-#ifdef CONFIG_PM
-
static const struct dev_pm_ops pci_dev_pm_ops = {
.prepare = pci_pm_prepare,
.suspend = pci_pm_suspend,
@@ -1231,11 +1221,15 @@ static const struct dev_pm_ops pci_dev_pm_ops = {
#define PCI_PM_OPS_PTR (&pci_dev_pm_ops)
-#else /* !COMFIG_PM_OPS */
+#else /* !CONFIG_PM */
+
+#define pci_pm_runtime_suspend NULL
+#define pci_pm_runtime_resume NULL
+#define pci_pm_runtime_idle NULL
#define PCI_PM_OPS_PTR NULL
-#endif /* !COMFIG_PM_OPS */
+#endif /* !CONFIG_PM */
/**
* __pci_register_driver - register a new pci driver
diff --git a/drivers/pci/pci-sysfs.c b/drivers/pci/pci-sysfs.c
index a5addbc9c026..a62acc443d5b 100644
--- a/drivers/pci/pci-sysfs.c
+++ b/drivers/pci/pci-sysfs.c
@@ -410,7 +410,7 @@ static ssize_t dev_bus_rescan_store(struct device *dev,
}
static DEVICE_ATTR(rescan, (S_IWUSR|S_IWGRP), NULL, dev_bus_rescan_store);
-#if defined(CONFIG_PM_RUNTIME) && defined(CONFIG_ACPI)
+#if defined(CONFIG_PM) && defined(CONFIG_ACPI)
static ssize_t d3cold_allowed_store(struct device *dev,
struct device_attribute *attr,
const char *buf, size_t count)
@@ -591,7 +591,7 @@ static struct attribute *pci_dev_attrs[] = {
&dev_attr_enable.attr,
&dev_attr_broken_parity_status.attr,
&dev_attr_msi_bus.attr,
-#if defined(CONFIG_PM_RUNTIME) && defined(CONFIG_ACPI)
+#if defined(CONFIG_PM) && defined(CONFIG_ACPI)
&dev_attr_d3cold_allowed.attr,
#endif
#ifdef CONFIG_OF
diff --git a/drivers/pci/pcie/Kconfig b/drivers/pci/pcie/Kconfig
index 7958e59d6077..e294713c8143 100644
--- a/drivers/pci/pcie/Kconfig
+++ b/drivers/pci/pcie/Kconfig
@@ -79,4 +79,4 @@ endchoice
config PCIE_PME
def_bool y
- depends on PCIEPORTBUS && PM_RUNTIME
+ depends on PCIEPORTBUS && PM
diff --git a/drivers/powercap/Kconfig b/drivers/powercap/Kconfig
index a7c81b53d88a..85727ef6ce8e 100644
--- a/drivers/powercap/Kconfig
+++ b/drivers/powercap/Kconfig
@@ -17,7 +17,7 @@ if POWERCAP
# Client driver configurations go here.
config INTEL_RAPL
tristate "Intel RAPL Support"
- depends on X86
+ depends on X86 && IOSF_MBI
default n
---help---
This enables support for the Intel Running Average Power Limit (RAPL)
diff --git a/drivers/powercap/intel_rapl.c b/drivers/powercap/intel_rapl.c
index 45e05b32f9b6..c71443c4f265 100644
--- a/drivers/powercap/intel_rapl.c
+++ b/drivers/powercap/intel_rapl.c
@@ -29,6 +29,7 @@
#include <linux/sysfs.h>
#include <linux/cpu.h>
#include <linux/powercap.h>
+#include <asm/iosf_mbi.h>
#include <asm/processor.h>
#include <asm/cpu_device_id.h>
@@ -70,11 +71,6 @@
#define RAPL_PRIMITIVE_DERIVED BIT(1) /* not from raw data */
#define RAPL_PRIMITIVE_DUMMY BIT(2)
-/* scale RAPL units to avoid floating point math inside kernel */
-#define POWER_UNIT_SCALE (1000000)
-#define ENERGY_UNIT_SCALE (1000000)
-#define TIME_UNIT_SCALE (1000000)
-
#define TIME_WINDOW_MAX_MSEC 40000
#define TIME_WINDOW_MIN_MSEC 250
@@ -175,9 +171,9 @@ struct rapl_package {
unsigned int id; /* physical package/socket id */
unsigned int nr_domains;
unsigned long domain_map; /* bit map of active domains */
- unsigned int power_unit_divisor;
- unsigned int energy_unit_divisor;
- unsigned int time_unit_divisor;
+ unsigned int power_unit;
+ unsigned int energy_unit;
+ unsigned int time_unit;
struct rapl_domain *domains; /* array of domains, sized at runtime */
struct powercap_zone *power_zone; /* keep track of parent zone */
int nr_cpus; /* active cpus on the package, topology info is lost during
@@ -188,6 +184,18 @@ struct rapl_package {
*/
struct list_head plist;
};
+
+struct rapl_defaults {
+ int (*check_unit)(struct rapl_package *rp, int cpu);
+ void (*set_floor_freq)(struct rapl_domain *rd, bool mode);
+ u64 (*compute_time_window)(struct rapl_package *rp, u64 val,
+ bool to_raw);
+};
+static struct rapl_defaults *rapl_defaults;
+
+/* Sideband MBI registers */
+#define IOSF_CPU_POWER_BUDGET_CTL (0x2)
+
#define PACKAGE_PLN_INT_SAVED BIT(0)
#define MAX_PRIM_NAME (32)
@@ -339,23 +347,13 @@ static int find_nr_power_limit(struct rapl_domain *rd)
static int set_domain_enable(struct powercap_zone *power_zone, bool mode)
{
struct rapl_domain *rd = power_zone_to_rapl_domain(power_zone);
- int nr_powerlimit;
if (rd->state & DOMAIN_STATE_BIOS_LOCKED)
return -EACCES;
+
get_online_cpus();
- nr_powerlimit = find_nr_power_limit(rd);
- /* here we activate/deactivate the hardware for power limiting */
rapl_write_data_raw(rd, PL1_ENABLE, mode);
- /* always enable clamp such that p-state can go below OS requested
- * range. power capping priority over guranteed frequency.
- */
- rapl_write_data_raw(rd, PL1_CLAMP, mode);
- /* some domains have pl2 */
- if (nr_powerlimit > 1) {
- rapl_write_data_raw(rd, PL2_ENABLE, mode);
- rapl_write_data_raw(rd, PL2_CLAMP, mode);
- }
+ rapl_defaults->set_floor_freq(rd, mode);
put_online_cpus();
return 0;
@@ -653,9 +651,7 @@ static void rapl_init_domains(struct rapl_package *rp)
static u64 rapl_unit_xlate(int package, enum unit_type type, u64 value,
int to_raw)
{
- u64 divisor = 1;
- int scale = 1; /* scale to user friendly data without floating point */
- u64 f, y; /* fraction and exp. used for time unit */
+ u64 units = 1;
struct rapl_package *rp;
rp = find_package_by_id(package);
@@ -664,42 +660,24 @@ static u64 rapl_unit_xlate(int package, enum unit_type type, u64 value,
switch (type) {
case POWER_UNIT:
- divisor = rp->power_unit_divisor;
- scale = POWER_UNIT_SCALE;
+ units = rp->power_unit;
break;
case ENERGY_UNIT:
- scale = ENERGY_UNIT_SCALE;
- divisor = rp->energy_unit_divisor;
+ units = rp->energy_unit;
break;
case TIME_UNIT:
- divisor = rp->time_unit_divisor;
- scale = TIME_UNIT_SCALE;
- /* special processing based on 2^Y*(1+F)/4 = val/divisor, refer
- * to Intel Software Developer's manual Vol. 3a, CH 14.7.4.
- */
- if (!to_raw) {
- f = (value & 0x60) >> 5;
- y = value & 0x1f;
- value = (1 << y) * (4 + f) * scale / 4;
- return div64_u64(value, divisor);
- } else {
- do_div(value, scale);
- value *= divisor;
- y = ilog2(value);
- f = div64_u64(4 * (value - (1 << y)), 1 << y);
- value = (y & 0x1f) | ((f & 0x3) << 5);
- return value;
- }
- break;
+ return rapl_defaults->compute_time_window(rp, value, to_raw);
case ARBITRARY_UNIT:
default:
return value;
};
if (to_raw)
- return div64_u64(value * divisor, scale);
- else
- return div64_u64(value * scale, divisor);
+ return div64_u64(value, units);
+
+ value *= units;
+
+ return value;
}
/* in the order of enum rapl_primitives */
@@ -833,12 +811,18 @@ static int rapl_write_data_raw(struct rapl_domain *rd,
return 0;
}
-static const struct x86_cpu_id energy_unit_quirk_ids[] = {
- { X86_VENDOR_INTEL, 6, 0x37},/* Valleyview */
- {}
-};
-
-static int rapl_check_unit(struct rapl_package *rp, int cpu)
+/*
+ * Raw RAPL data stored in MSRs are in certain scales. We need to
+ * convert them into standard units based on the units reported in
+ * the RAPL unit MSRs. This is specific to CPUs as the method to
+ * calculate units differ on different CPUs.
+ * We convert the units to below format based on CPUs.
+ * i.e.
+ * energy unit: microJoules : Represented in microJoules by default
+ * power unit : microWatts : Represented in milliWatts by default
+ * time unit : microseconds: Represented in seconds by default
+ */
+static int rapl_check_unit_core(struct rapl_package *rp, int cpu)
{
u64 msr_val;
u32 value;
@@ -849,36 +833,47 @@ static int rapl_check_unit(struct rapl_package *rp, int cpu)
return -ENODEV;
}
- /* Raw RAPL data stored in MSRs are in certain scales. We need to
- * convert them into standard units based on the divisors reported in
- * the RAPL unit MSRs.
- * i.e.
- * energy unit: 1/enery_unit_divisor Joules
- * power unit: 1/power_unit_divisor Watts
- * time unit: 1/time_unit_divisor Seconds
- */
value = (msr_val & ENERGY_UNIT_MASK) >> ENERGY_UNIT_OFFSET;
- /* some CPUs have different way to calculate energy unit */
- if (x86_match_cpu(energy_unit_quirk_ids))
- rp->energy_unit_divisor = 1000000 / (1 << value);
- else
- rp->energy_unit_divisor = 1 << value;
+ rp->energy_unit = 1000000 / (1 << value);
value = (msr_val & POWER_UNIT_MASK) >> POWER_UNIT_OFFSET;
- rp->power_unit_divisor = 1 << value;
+ rp->power_unit = 1000000 / (1 << value);
value = (msr_val & TIME_UNIT_MASK) >> TIME_UNIT_OFFSET;
- rp->time_unit_divisor = 1 << value;
+ rp->time_unit = 1000000 / (1 << value);
- pr_debug("Physical package %d units: energy=%d, time=%d, power=%d\n",
- rp->id,
- rp->energy_unit_divisor,
- rp->time_unit_divisor,
- rp->power_unit_divisor);
+ pr_debug("Core CPU package %d energy=%duJ, time=%dus, power=%duW\n",
+ rp->id, rp->energy_unit, rp->time_unit, rp->power_unit);
return 0;
}
+static int rapl_check_unit_atom(struct rapl_package *rp, int cpu)
+{
+ u64 msr_val;
+ u32 value;
+
+ if (rdmsrl_safe_on_cpu(cpu, MSR_RAPL_POWER_UNIT, &msr_val)) {
+ pr_err("Failed to read power unit MSR 0x%x on CPU %d, exit.\n",
+ MSR_RAPL_POWER_UNIT, cpu);
+ return -ENODEV;
+ }
+ value = (msr_val & ENERGY_UNIT_MASK) >> ENERGY_UNIT_OFFSET;
+ rp->energy_unit = 1 << value;
+
+ value = (msr_val & POWER_UNIT_MASK) >> POWER_UNIT_OFFSET;
+ rp->power_unit = (1 << value) * 1000;
+
+ value = (msr_val & TIME_UNIT_MASK) >> TIME_UNIT_OFFSET;
+ rp->time_unit = 1000000 / (1 << value);
+
+ pr_debug("Atom package %d energy=%duJ, time=%dus, power=%duW\n",
+ rp->id, rp->energy_unit, rp->time_unit, rp->power_unit);
+
+ return 0;
+}
+
+
/* REVISIT:
* When package power limit is set artificially low by RAPL, LVT
* thermal interrupt for package power limit should be ignored
@@ -946,16 +941,107 @@ static void package_power_limit_irq_restore(int package_id)
wrmsr_on_cpu(cpu, MSR_IA32_PACKAGE_THERM_INTERRUPT, l, h);
}
+static void set_floor_freq_default(struct rapl_domain *rd, bool mode)
+{
+ int nr_powerlimit = find_nr_power_limit(rd);
+
+ /* always enable clamp such that p-state can go below OS requested
+ * range. power capping priority over guranteed frequency.
+ */
+ rapl_write_data_raw(rd, PL1_CLAMP, mode);
+
+ /* some domains have pl2 */
+ if (nr_powerlimit > 1) {
+ rapl_write_data_raw(rd, PL2_ENABLE, mode);
+ rapl_write_data_raw(rd, PL2_CLAMP, mode);
+ }
+}
+
+static void set_floor_freq_atom(struct rapl_domain *rd, bool enable)
+{
+ static u32 power_ctrl_orig_val;
+ u32 mdata;
+
+ if (!power_ctrl_orig_val)
+ iosf_mbi_read(BT_MBI_UNIT_PMC, BT_MBI_PMC_READ,
+ IOSF_CPU_POWER_BUDGET_CTL, &power_ctrl_orig_val);
+ mdata = power_ctrl_orig_val;
+ if (enable) {
+ mdata &= ~(0x7f << 8);
+ mdata |= 1 << 8;
+ }
+ iosf_mbi_write(BT_MBI_UNIT_PMC, BT_MBI_PMC_WRITE,
+ IOSF_CPU_POWER_BUDGET_CTL, mdata);
+}
+
+static u64 rapl_compute_time_window_core(struct rapl_package *rp, u64 value,
+ bool to_raw)
+{
+ u64 f, y; /* fraction and exp. used for time unit */
+
+ /*
+ * Special processing based on 2^Y*(1+F/4), refer
+ * to Intel Software Developer's manual Vol.3B: CH 14.9.3.
+ */
+ if (!to_raw) {
+ f = (value & 0x60) >> 5;
+ y = value & 0x1f;
+ value = (1 << y) * (4 + f) * rp->time_unit / 4;
+ } else {
+ do_div(value, rp->time_unit);
+ y = ilog2(value);
+ f = div64_u64(4 * (value - (1 << y)), 1 << y);
+ value = (y & 0x1f) | ((f & 0x3) << 5);
+ }
+ return value;
+}
+
+static u64 rapl_compute_time_window_atom(struct rapl_package *rp, u64 value,
+ bool to_raw)
+{
+ /*
+ * Atom time unit encoding is straight forward val * time_unit,
+ * where time_unit is default to 1 sec. Never 0.
+ */
+ if (!to_raw)
+ return (value) ? value *= rp->time_unit : rp->time_unit;
+ else
+ value = div64_u64(value, rp->time_unit);
+
+ return value;
+}
+
+static const struct rapl_defaults rapl_defaults_core = {
+ .check_unit = rapl_check_unit_core,
+ .set_floor_freq = set_floor_freq_default,
+ .compute_time_window = rapl_compute_time_window_core,
+};
+
+static const struct rapl_defaults rapl_defaults_atom = {
+ .check_unit = rapl_check_unit_atom,
+ .set_floor_freq = set_floor_freq_atom,
+ .compute_time_window = rapl_compute_time_window_atom,
+};
+
+#define RAPL_CPU(_model, _ops) { \
+ .vendor = X86_VENDOR_INTEL, \
+ .family = 6, \
+ .model = _model, \
+ .driver_data = (kernel_ulong_t)&_ops, \
+ }
+
static const struct x86_cpu_id rapl_ids[] = {
- { X86_VENDOR_INTEL, 6, 0x2a},/* Sandy Bridge */
- { X86_VENDOR_INTEL, 6, 0x2d},/* Sandy Bridge EP */
- { X86_VENDOR_INTEL, 6, 0x37},/* Valleyview */
- { X86_VENDOR_INTEL, 6, 0x3a},/* Ivy Bridge */
- { X86_VENDOR_INTEL, 6, 0x3c},/* Haswell */
- { X86_VENDOR_INTEL, 6, 0x3d},/* Broadwell */
- { X86_VENDOR_INTEL, 6, 0x3f},/* Haswell */
- { X86_VENDOR_INTEL, 6, 0x45},/* Haswell ULT */
- /* TODO: Add more CPU IDs after testing */
+ RAPL_CPU(0x2a, rapl_defaults_core),/* Sandy Bridge */
+ RAPL_CPU(0x2d, rapl_defaults_core),/* Sandy Bridge EP */
+ RAPL_CPU(0x37, rapl_defaults_atom),/* Valleyview */
+ RAPL_CPU(0x3a, rapl_defaults_core),/* Ivy Bridge */
+ RAPL_CPU(0x3c, rapl_defaults_core),/* Haswell */
+ RAPL_CPU(0x3d, rapl_defaults_core),/* Broadwell */
+ RAPL_CPU(0x3f, rapl_defaults_core),/* Haswell */
+ RAPL_CPU(0x45, rapl_defaults_core),/* Haswell ULT */
+ RAPL_CPU(0x4C, rapl_defaults_atom),/* Braswell */
+ RAPL_CPU(0x4A, rapl_defaults_atom),/* Tangier */
+ RAPL_CPU(0x5A, rapl_defaults_atom),/* Annidale */
{}
};
MODULE_DEVICE_TABLE(x86cpu, rapl_ids);
@@ -1241,7 +1327,7 @@ static int rapl_detect_topology(void)
/* check if the package contains valid domains */
if (rapl_detect_domains(new_package, i) ||
- rapl_check_unit(new_package, i)) {
+ rapl_defaults->check_unit(new_package, i)) {
kfree(new_package->domains);
kfree(new_package);
/* free up the packages already initialized */
@@ -1296,7 +1382,7 @@ static int rapl_add_package(int cpu)
rp->nr_cpus = 1;
/* check if the package contains valid domains */
if (rapl_detect_domains(rp, cpu) ||
- rapl_check_unit(rp, cpu)) {
+ rapl_defaults->check_unit(rp, cpu)) {
ret = -ENODEV;
goto err_free_package;
}
@@ -1358,14 +1444,18 @@ static struct notifier_block rapl_cpu_notifier = {
static int __init rapl_init(void)
{
int ret = 0;
+ const struct x86_cpu_id *id;
- if (!x86_match_cpu(rapl_ids)) {
+ id = x86_match_cpu(rapl_ids);
+ if (!id) {
pr_err("driver does not support CPU family %d model %d\n",
boot_cpu_data.x86, boot_cpu_data.x86_model);
return -ENODEV;
}
+ rapl_defaults = (struct rapl_defaults *)id->driver_data;
+
cpu_notifier_register_begin();
/* prevent CPU hotplug during detection */
diff --git a/drivers/sh/pm_runtime.c b/drivers/sh/pm_runtime.c
index fe2c2d595f59..f3ee439d6f0e 100644
--- a/drivers/sh/pm_runtime.c
+++ b/drivers/sh/pm_runtime.c
@@ -20,7 +20,7 @@
#include <linux/bitmap.h>
#include <linux/slab.h>
-#ifdef CONFIG_PM_RUNTIME
+#ifdef CONFIG_PM
static int sh_pm_runtime_suspend(struct device *dev)
{
int ret;
@@ -68,7 +68,7 @@ static struct dev_pm_domain default_pm_domain = {
#define DEFAULT_PM_DOMAIN_PTR NULL
-#endif /* CONFIG_PM_RUNTIME */
+#endif /* CONFIG_PM */
static struct pm_clk_notifier_block platform_bus_notifier = {
.pm_domain = DEFAULT_PM_DOMAIN_PTR,
diff --git a/drivers/spi/spi-pl022.c b/drivers/spi/spi-pl022.c
index fc2dd8441608..89ca162801da 100644
--- a/drivers/spi/spi-pl022.c
+++ b/drivers/spi/spi-pl022.c
@@ -2377,7 +2377,7 @@ static int pl022_runtime_resume(struct device *dev)
static const struct dev_pm_ops pl022_dev_pm_ops = {
SET_SYSTEM_SLEEP_PM_OPS(pl022_suspend, pl022_resume)
- SET_PM_RUNTIME_PM_OPS(pl022_runtime_suspend, pl022_runtime_resume, NULL)
+ SET_RUNTIME_PM_OPS(pl022_runtime_suspend, pl022_runtime_resume, NULL)
};
static struct vendor_data vendor_arm = {
diff --git a/drivers/usb/core/driver.c b/drivers/usb/core/driver.c
index 9bffd26cea05..874dec31a111 100644
--- a/drivers/usb/core/driver.c
+++ b/drivers/usb/core/driver.c
@@ -1493,10 +1493,6 @@ int usb_resume(struct device *dev, pm_message_t msg)
return status;
}
-#endif /* CONFIG_PM */
-
-#ifdef CONFIG_PM_RUNTIME
-
/**
* usb_enable_autosuspend - allow a USB device to be autosuspended
* @udev: the USB device which may be autosuspended
@@ -1876,7 +1872,7 @@ int usb_set_usb2_hardware_lpm(struct usb_device *udev, int enable)
return ret;
}
-#endif /* CONFIG_PM_RUNTIME */
+#endif /* CONFIG_PM */
struct bus_type usb_bus_type = {
.name = "usb",
diff --git a/drivers/usb/core/hcd-pci.c b/drivers/usb/core/hcd-pci.c
index efc953119ce2..9eb1cff28bd4 100644
--- a/drivers/usb/core/hcd-pci.c
+++ b/drivers/usb/core/hcd-pci.c
@@ -429,7 +429,6 @@ static int check_root_hub_suspended(struct device *dev)
return 0;
}
-#if defined(CONFIG_PM_SLEEP) || defined(CONFIG_PM_RUNTIME)
static int suspend_common(struct device *dev, bool do_wakeup)
{
struct pci_dev *pci_dev = to_pci_dev(dev);
@@ -528,7 +527,6 @@ static int resume_common(struct device *dev, int event)
}
return retval;
}
-#endif /* SLEEP || RUNTIME */
#ifdef CONFIG_PM_SLEEP
@@ -607,8 +605,6 @@ static int hcd_pci_restore(struct device *dev)
#endif /* CONFIG_PM_SLEEP */
-#ifdef CONFIG_PM_RUNTIME
-
static int hcd_pci_runtime_suspend(struct device *dev)
{
int retval;
@@ -630,13 +626,6 @@ static int hcd_pci_runtime_resume(struct device *dev)
return retval;
}
-#else
-
-#define hcd_pci_runtime_suspend NULL
-#define hcd_pci_runtime_resume NULL
-
-#endif /* CONFIG_PM_RUNTIME */
-
const struct dev_pm_ops usb_hcd_pci_pm_ops = {
.suspend = hcd_pci_suspend,
.suspend_noirq = hcd_pci_suspend_noirq,
diff --git a/drivers/usb/core/hcd.c b/drivers/usb/core/hcd.c
index a6efb4184f2b..278be0515e8e 100644
--- a/drivers/usb/core/hcd.c
+++ b/drivers/usb/core/hcd.c
@@ -2258,10 +2258,6 @@ int hcd_bus_resume(struct usb_device *rhdev, pm_message_t msg)
return status;
}
-#endif /* CONFIG_PM */
-
-#ifdef CONFIG_PM_RUNTIME
-
/* Workqueue routine for root-hub remote wakeup */
static void hcd_resume_work(struct work_struct *work)
{
@@ -2293,7 +2289,7 @@ void usb_hcd_resume_root_hub (struct usb_hcd *hcd)
}
EXPORT_SYMBOL_GPL(usb_hcd_resume_root_hub);
-#endif /* CONFIG_PM_RUNTIME */
+#endif /* CONFIG_PM */
/*-------------------------------------------------------------------------*/
@@ -2476,7 +2472,7 @@ struct usb_hcd *usb_create_shared_hcd(const struct hc_driver *driver,
init_timer(&hcd->rh_timer);
hcd->rh_timer.function = rh_timer_func;
hcd->rh_timer.data = (unsigned long) hcd;
-#ifdef CONFIG_PM_RUNTIME
+#ifdef CONFIG_PM
INIT_WORK(&hcd->wakeup_work, hcd_resume_work);
#endif
@@ -2790,7 +2786,7 @@ error_create_attr_group:
hcd->rh_registered = 0;
spin_unlock_irq(&hcd_root_hub_lock);
-#ifdef CONFIG_PM_RUNTIME
+#ifdef CONFIG_PM
cancel_work_sync(&hcd->wakeup_work);
#endif
mutex_lock(&usb_bus_list_lock);
@@ -2858,7 +2854,7 @@ void usb_remove_hcd(struct usb_hcd *hcd)
hcd->rh_registered = 0;
spin_unlock_irq (&hcd_root_hub_lock);
-#ifdef CONFIG_PM_RUNTIME
+#ifdef CONFIG_PM
cancel_work_sync(&hcd->wakeup_work);
#endif
diff --git a/drivers/usb/core/hub.c b/drivers/usb/core/hub.c
index b649fef2e35d..c9596525ba8c 100644
--- a/drivers/usb/core/hub.c
+++ b/drivers/usb/core/hub.c
@@ -1737,7 +1737,7 @@ static int hub_probe(struct usb_interface *intf, const struct usb_device_id *id)
* - If user has indicated to prevent autosuspend by passing
* usbcore.autosuspend = -1 then keep autosuspend disabled.
*/
-#ifdef CONFIG_PM_RUNTIME
+#ifdef CONFIG_PM
if (hdev->dev.power.autosuspend_delay >= 0)
pm_runtime_set_autosuspend_delay(&hdev->dev, 0);
#endif
@@ -3449,7 +3449,7 @@ int usb_port_resume(struct usb_device *udev, pm_message_t msg)
return status;
}
-#ifdef CONFIG_PM_RUNTIME
+#ifdef CONFIG_PM
int usb_remote_wakeup(struct usb_device *udev)
{
@@ -4856,7 +4856,7 @@ static void hub_port_connect_change(struct usb_hub *hub, int port1,
udev->state != USB_STATE_NOTATTACHED) {
if (portstatus & USB_PORT_STAT_ENABLE) {
status = 0; /* Nothing to do */
-#ifdef CONFIG_PM_RUNTIME
+#ifdef CONFIG_PM
} else if (udev->state == USB_STATE_SUSPENDED &&
udev->persist_enabled) {
/* For a suspended device, treat this as a
diff --git a/drivers/usb/core/port.c b/drivers/usb/core/port.c
index cd3f9dc24a06..210618319f10 100644
--- a/drivers/usb/core/port.c
+++ b/drivers/usb/core/port.c
@@ -72,7 +72,7 @@ static void usb_port_device_release(struct device *dev)
kfree(port_dev);
}
-#ifdef CONFIG_PM_RUNTIME
+#ifdef CONFIG_PM
static int usb_port_runtime_resume(struct device *dev)
{
struct usb_port *port_dev = to_usb_port(dev);
@@ -171,7 +171,7 @@ static int usb_port_runtime_suspend(struct device *dev)
#endif
static const struct dev_pm_ops usb_port_pm_ops = {
-#ifdef CONFIG_PM_RUNTIME
+#ifdef CONFIG_PM
.runtime_suspend = usb_port_runtime_suspend,
.runtime_resume = usb_port_runtime_resume,
#endif
diff --git a/drivers/usb/core/sysfs.c b/drivers/usb/core/sysfs.c
index 1236c6011c70..d26973844a4d 100644
--- a/drivers/usb/core/sysfs.c
+++ b/drivers/usb/core/sysfs.c
@@ -334,14 +334,6 @@ static void remove_persist_attributes(struct device *dev)
&dev_attr_persist.attr,
power_group_name);
}
-#else
-
-#define add_persist_attributes(dev) 0
-#define remove_persist_attributes(dev) do {} while (0)
-
-#endif /* CONFIG_PM */
-
-#ifdef CONFIG_PM_RUNTIME
static ssize_t connected_duration_show(struct device *dev,
struct device_attribute *attr, char *buf)
@@ -585,10 +577,13 @@ static void remove_power_attributes(struct device *dev)
#else
+#define add_persist_attributes(dev) 0
+#define remove_persist_attributes(dev) do {} while (0)
+
#define add_power_attributes(dev) 0
#define remove_power_attributes(dev) do {} while (0)
-#endif /* CONFIG_PM_RUNTIME */
+#endif /* CONFIG_PM */
/* Descriptor fields */
diff --git a/drivers/usb/core/usb.c b/drivers/usb/core/usb.c
index 2dd2362198d2..2a92b97f0144 100644
--- a/drivers/usb/core/usb.c
+++ b/drivers/usb/core/usb.c
@@ -49,7 +49,7 @@ const char *usbcore_name = "usbcore";
static bool nousb; /* Disable USB when built into kernel image */
-#ifdef CONFIG_PM_RUNTIME
+#ifdef CONFIG_PM
static int usb_autosuspend_delay = 2; /* Default delay value,
* in seconds */
module_param_named(autosuspend, usb_autosuspend_delay, int, 0644);
@@ -348,11 +348,9 @@ static const struct dev_pm_ops usb_device_pm_ops = {
.thaw = usb_dev_thaw,
.poweroff = usb_dev_poweroff,
.restore = usb_dev_restore,
-#ifdef CONFIG_PM_RUNTIME
.runtime_suspend = usb_runtime_suspend,
.runtime_resume = usb_runtime_resume,
.runtime_idle = usb_runtime_idle,
-#endif
};
#endif /* CONFIG_PM */
diff --git a/drivers/usb/core/usb.h b/drivers/usb/core/usb.h
index b1b34d0557c9..7eb1e26798e5 100644
--- a/drivers/usb/core/usb.h
+++ b/drivers/usb/core/usb.h
@@ -75,6 +75,14 @@ extern int usb_resume_complete(struct device *dev);
extern int usb_port_suspend(struct usb_device *dev, pm_message_t msg);
extern int usb_port_resume(struct usb_device *dev, pm_message_t msg);
+extern void usb_autosuspend_device(struct usb_device *udev);
+extern int usb_autoresume_device(struct usb_device *udev);
+extern int usb_remote_wakeup(struct usb_device *dev);
+extern int usb_runtime_suspend(struct device *dev);
+extern int usb_runtime_resume(struct device *dev);
+extern int usb_runtime_idle(struct device *dev);
+extern int usb_set_usb2_hardware_lpm(struct usb_device *udev, int enable);
+
#else
static inline int usb_port_suspend(struct usb_device *udev, pm_message_t msg)
@@ -87,20 +95,6 @@ static inline int usb_port_resume(struct usb_device *udev, pm_message_t msg)
return 0;
}
-#endif
-
-#ifdef CONFIG_PM_RUNTIME
-
-extern void usb_autosuspend_device(struct usb_device *udev);
-extern int usb_autoresume_device(struct usb_device *udev);
-extern int usb_remote_wakeup(struct usb_device *dev);
-extern int usb_runtime_suspend(struct device *dev);
-extern int usb_runtime_resume(struct device *dev);
-extern int usb_runtime_idle(struct device *dev);
-extern int usb_set_usb2_hardware_lpm(struct usb_device *udev, int enable);
-
-#else
-
#define usb_autosuspend_device(udev) do {} while (0)
static inline int usb_autoresume_device(struct usb_device *udev)
{
@@ -111,6 +105,7 @@ static inline int usb_set_usb2_hardware_lpm(struct usb_device *udev, int enable)
{
return 0;
}
+
#endif
extern struct bus_type usb_bus_type;
diff --git a/drivers/usb/host/ehci-pci.c b/drivers/usb/host/ehci-pci.c
index ca7b964124af..851006a0d97b 100644
--- a/drivers/usb/host/ehci-pci.c
+++ b/drivers/usb/host/ehci-pci.c
@@ -305,7 +305,7 @@ static int ehci_pci_setup(struct usb_hcd *hcd)
}
}
-#ifdef CONFIG_PM_RUNTIME
+#ifdef CONFIG_PM
if (ehci->no_selective_suspend && device_can_wakeup(&pdev->dev))
ehci_warn(ehci, "selective suspend/wakeup unavailable\n");
#endif
diff --git a/drivers/usb/host/sl811-hcd.c b/drivers/usb/host/sl811-hcd.c
index ad0c348e68e9..25fb1da8d3d7 100644
--- a/drivers/usb/host/sl811-hcd.c
+++ b/drivers/usb/host/sl811-hcd.c
@@ -22,7 +22,7 @@
* and usb-storage.
*
* TODO:
- * - usb suspend/resume triggered by sl811 (with PM_RUNTIME)
+ * - usb suspend/resume triggered by sl811
* - various issues noted in the code
* - performance work; use both register banks; ...
* - use urb->iso_frame_desc[] with ISO transfers
@@ -1752,8 +1752,7 @@ sl811h_probe(struct platform_device *dev)
#ifdef CONFIG_PM
/* for this device there's no useful distinction between the controller
- * and its root hub, except that the root hub only gets direct PM calls
- * when CONFIG_PM_RUNTIME is enabled.
+ * and its root hub.
*/
static int
diff --git a/drivers/usb/host/u132-hcd.c b/drivers/usb/host/u132-hcd.c
index c0671750671f..bf86630b3cea 100644
--- a/drivers/usb/host/u132-hcd.c
+++ b/drivers/usb/host/u132-hcd.c
@@ -3144,8 +3144,7 @@ static int u132_probe(struct platform_device *pdev)
#ifdef CONFIG_PM
/*
* for this device there's no useful distinction between the controller
- * and its root hub, except that the root hub only gets direct PM calls
- * when CONFIG_PM_RUNTIME is enabled.
+ * and its root hub.
*/
static int u132_suspend(struct platform_device *pdev, pm_message_t state)
{
diff --git a/drivers/usb/host/xhci-hub.c b/drivers/usb/host/xhci-hub.c
index 388cfd83b6b6..a7865c4b0498 100644
--- a/drivers/usb/host/xhci-hub.c
+++ b/drivers/usb/host/xhci-hub.c
@@ -1145,7 +1145,7 @@ int xhci_bus_suspend(struct usb_hcd *hcd)
set_bit(port_index, &bus_state->bus_suspended);
}
/* USB core sets remote wake mask for USB 3.0 hubs,
- * including the USB 3.0 roothub, but only if CONFIG_PM_RUNTIME
+ * including the USB 3.0 roothub, but only if CONFIG_PM
* is enabled, so also enable remote wake here.
*/
if (hcd->self.root_hub->do_remote_wakeup) {
diff --git a/drivers/usb/host/xhci.c b/drivers/usb/host/xhci.c
index 033b46c470bd..cf3413116aff 100644
--- a/drivers/usb/host/xhci.c
+++ b/drivers/usb/host/xhci.c
@@ -4029,7 +4029,7 @@ static int __maybe_unused xhci_change_max_exit_latency(struct xhci_hcd *xhci,
return ret;
}
-#ifdef CONFIG_PM_RUNTIME
+#ifdef CONFIG_PM
/* BESL to HIRD Encoding array for USB2 LPM */
static int xhci_besl_encoding[16] = {125, 150, 200, 300, 400, 500, 1000, 2000,
@@ -4244,24 +4244,8 @@ int xhci_update_device(struct usb_hcd *hcd, struct usb_device *udev)
return 0;
}
-#else
-
-int xhci_set_usb2_hardware_lpm(struct usb_hcd *hcd,
- struct usb_device *udev, int enable)
-{
- return 0;
-}
-
-int xhci_update_device(struct usb_hcd *hcd, struct usb_device *udev)
-{
- return 0;
-}
-
-#endif /* CONFIG_PM_RUNTIME */
-
/*---------------------- USB 3.0 Link PM functions ------------------------*/
-#ifdef CONFIG_PM
/* Service interval in nanoseconds = 2^(bInterval - 1) * 125us * 1000ns / 1us */
static unsigned long long xhci_service_interval_to_ns(
struct usb_endpoint_descriptor *desc)
@@ -4692,6 +4676,17 @@ int xhci_disable_usb3_lpm_timeout(struct usb_hcd *hcd,
}
#else /* CONFIG_PM */
+int xhci_set_usb2_hardware_lpm(struct usb_hcd *hcd,
+ struct usb_device *udev, int enable)
+{
+ return 0;
+}
+
+int xhci_update_device(struct usb_hcd *hcd, struct usb_device *udev)
+{
+ return 0;
+}
+
int xhci_enable_usb3_lpm_timeout(struct usb_hcd *hcd,
struct usb_device *udev, enum usb3_link_state state)
{
diff --git a/drivers/usb/phy/phy-msm-usb.c b/drivers/usb/phy/phy-msm-usb.c
index 7843ef7dd0ff..29be0e654ecc 100644
--- a/drivers/usb/phy/phy-msm-usb.c
+++ b/drivers/usb/phy/phy-msm-usb.c
@@ -1761,7 +1761,7 @@ static int msm_otg_remove(struct platform_device *pdev)
return 0;
}
-#ifdef CONFIG_PM_RUNTIME
+#ifdef CONFIG_PM
static int msm_otg_runtime_idle(struct device *dev)
{
struct msm_otg *motg = dev_get_drvdata(dev);
diff --git a/include/acpi/acbuffer.h b/include/acpi/acbuffer.h
index 88cb477524a6..d5ec6c87810f 100644
--- a/include/acpi/acbuffer.h
+++ b/include/acpi/acbuffer.h
@@ -111,7 +111,9 @@ struct acpi_gtm_info {
struct acpi_pld_info {
u8 revision;
u8 ignore_color;
- u32 color;
+ u8 red;
+ u8 green;
+ u8 blue;
u16 width;
u16 height;
u8 user_visible;
@@ -155,8 +157,14 @@ struct acpi_pld_info {
#define ACPI_PLD_GET_IGNORE_COLOR(dword) ACPI_GET_BITS (dword, 7, ACPI_1BIT_MASK)
#define ACPI_PLD_SET_IGNORE_COLOR(dword,value) ACPI_SET_BITS (dword, 7, ACPI_1BIT_MASK, value) /* Offset 7, Len 1 */
-#define ACPI_PLD_GET_COLOR(dword) ACPI_GET_BITS (dword, 8, ACPI_24BIT_MASK)
-#define ACPI_PLD_SET_COLOR(dword,value) ACPI_SET_BITS (dword, 8, ACPI_24BIT_MASK, value) /* Offset 8, Len 24 */
+#define ACPI_PLD_GET_RED(dword) ACPI_GET_BITS (dword, 8, ACPI_8BIT_MASK)
+#define ACPI_PLD_SET_RED(dword,value) ACPI_SET_BITS (dword, 8, ACPI_8BIT_MASK, value) /* Offset 8, Len 8 */
+
+#define ACPI_PLD_GET_GREEN(dword) ACPI_GET_BITS (dword, 16, ACPI_8BIT_MASK)
+#define ACPI_PLD_SET_GREEN(dword,value) ACPI_SET_BITS (dword, 16, ACPI_8BIT_MASK, value) /* Offset 16, Len 8 */
+
+#define ACPI_PLD_GET_BLUE(dword) ACPI_GET_BITS (dword, 24, ACPI_8BIT_MASK)
+#define ACPI_PLD_SET_BLUE(dword,value) ACPI_SET_BITS (dword, 24, ACPI_8BIT_MASK, value) /* Offset 24, Len 8 */
/* Second 32-bit dword, bits 33:63 */
diff --git a/include/acpi/acpi_bus.h b/include/acpi/acpi_bus.h
index f34a0835aa4f..7581518e3eff 100644
--- a/include/acpi/acpi_bus.h
+++ b/include/acpi/acpi_bus.h
@@ -27,6 +27,7 @@
#define __ACPI_BUS_H__
#include <linux/device.h>
+#include <linux/property.h>
/* TBD: Make dynamic */
#define ACPI_MAX_HANDLES 10
@@ -337,10 +338,20 @@ struct acpi_device_physical_node {
bool put_online:1;
};
+/* ACPI Device Specific Data (_DSD) */
+struct acpi_device_data {
+ const union acpi_object *pointer;
+ const union acpi_object *properties;
+ const union acpi_object *of_compatible;
+};
+
+struct acpi_gpio_mapping;
+
/* Device */
struct acpi_device {
int device_type;
acpi_handle handle; /* no handle for fixed hardware */
+ struct fwnode_handle fwnode;
struct acpi_device *parent;
struct list_head children;
struct list_head node;
@@ -353,17 +364,35 @@ struct acpi_device {
struct acpi_device_wakeup wakeup;
struct acpi_device_perf performance;
struct acpi_device_dir dir;
+ struct acpi_device_data data;
struct acpi_scan_handler *handler;
struct acpi_hotplug_context *hp;
struct acpi_driver *driver;
+ const struct acpi_gpio_mapping *driver_gpios;
void *driver_data;
struct device dev;
unsigned int physical_node_count;
+ unsigned int dep_unmet;
struct list_head physical_node_list;
struct mutex physical_node_lock;
void (*remove)(struct acpi_device *);
};
+static inline bool is_acpi_node(struct fwnode_handle *fwnode)
+{
+ return fwnode && fwnode->type == FWNODE_ACPI;
+}
+
+static inline struct acpi_device *acpi_node(struct fwnode_handle *fwnode)
+{
+ return fwnode ? container_of(fwnode, struct acpi_device, fwnode) : NULL;
+}
+
+static inline struct fwnode_handle *acpi_fwnode_handle(struct acpi_device *adev)
+{
+ return &adev->fwnode;
+}
+
static inline void *acpi_driver_data(struct acpi_device *d)
{
return d->driver_data;
@@ -516,6 +545,7 @@ acpi_status acpi_add_pm_notifier(struct acpi_device *adev, struct device *dev,
void (*work_func)(struct work_struct *work));
acpi_status acpi_remove_pm_notifier(struct acpi_device *adev);
int acpi_pm_device_sleep_state(struct device *, int *, int);
+int acpi_pm_device_run_wake(struct device *, bool);
#else
static inline acpi_status acpi_add_pm_notifier(struct acpi_device *adev,
struct device *dev,
@@ -535,11 +565,6 @@ static inline int acpi_pm_device_sleep_state(struct device *d, int *p, int m)
return (m >= ACPI_STATE_D0 && m <= ACPI_STATE_D3_COLD) ?
m : ACPI_STATE_D0;
}
-#endif
-
-#ifdef CONFIG_PM_RUNTIME
-int acpi_pm_device_run_wake(struct device *, bool);
-#else
static inline int acpi_pm_device_run_wake(struct device *dev, bool enable)
{
return -ENODEV;
diff --git a/include/acpi/acpixf.h b/include/acpi/acpixf.h
index ab2acf629a64..5ba78464c1b1 100644
--- a/include/acpi/acpixf.h
+++ b/include/acpi/acpixf.h
@@ -46,7 +46,7 @@
/* Current ACPICA subsystem version in YYYYMMDD format */
-#define ACPI_CA_VERSION 0x20140926
+#define ACPI_CA_VERSION 0x20141107
#include <acpi/acconfig.h>
#include <acpi/actypes.h>
diff --git a/include/acpi/actypes.h b/include/acpi/actypes.h
index 7000e66f768e..bbef17368e49 100644
--- a/include/acpi/actypes.h
+++ b/include/acpi/actypes.h
@@ -736,6 +736,10 @@ typedef u32 acpi_event_status;
#define ACPI_GPE_ENABLE 0
#define ACPI_GPE_DISABLE 1
#define ACPI_GPE_CONDITIONAL_ENABLE 2
+#define ACPI_GPE_SAVE_MASK 4
+
+#define ACPI_GPE_ENABLE_SAVE (ACPI_GPE_ENABLE | ACPI_GPE_SAVE_MASK)
+#define ACPI_GPE_DISABLE_SAVE (ACPI_GPE_DISABLE | ACPI_GPE_SAVE_MASK)
/*
* GPE info flags - Per GPE
diff --git a/include/acpi/processor.h b/include/acpi/processor.h
index 9b9b6f29bbf3..3ca9b751f122 100644
--- a/include/acpi/processor.h
+++ b/include/acpi/processor.h
@@ -67,9 +67,6 @@ struct acpi_processor_cx {
};
struct acpi_processor_power {
- struct acpi_processor_cx *state;
- unsigned long bm_check_timestamp;
- u32 default_state;
int count;
struct acpi_processor_cx states[ACPI_PROCESSOR_MAX_POWER];
int timer_broadcast_on_state;
@@ -313,11 +310,13 @@ static inline int acpi_processor_get_bios_limit(int cpu, unsigned int *limit)
#endif /* CONFIG_CPU_FREQ */
/* in processor_core.c */
-void acpi_processor_set_pdc(acpi_handle handle);
int acpi_get_apicid(acpi_handle, int type, u32 acpi_id);
int acpi_map_cpuid(int apic_id, u32 acpi_id);
int acpi_get_cpuid(acpi_handle, int type, u32 acpi_id);
+/* in processor_pdc.c */
+void acpi_processor_set_pdc(acpi_handle handle);
+
/* in processor_throttling.c */
int acpi_processor_tstate_has_changed(struct acpi_processor *pr);
int acpi_processor_get_throttling_info(struct acpi_processor *pr);
diff --git a/include/linux/acpi.h b/include/linux/acpi.h
index 407a12f663eb..6bff83b1f298 100644
--- a/include/linux/acpi.h
+++ b/include/linux/acpi.h
@@ -28,6 +28,7 @@
#include <linux/errno.h>
#include <linux/ioport.h> /* for struct resource */
#include <linux/device.h>
+#include <linux/property.h>
#ifndef _LINUX
#define _LINUX
@@ -123,6 +124,10 @@ int acpi_numa_init (void);
int acpi_table_init (void);
int acpi_table_parse(char *id, acpi_tbl_table_handler handler);
+int __init acpi_parse_entries(char *id, unsigned long table_size,
+ acpi_tbl_entry_handler handler,
+ struct acpi_table_header *table_header,
+ int entry_id, unsigned int max_entries);
int __init acpi_table_parse_entries(char *id, unsigned long table_size,
int entry_id,
acpi_tbl_entry_handler handler,
@@ -423,14 +428,11 @@ extern int acpi_nvs_for_each_region(int (*func)(__u64, __u64, void *),
const struct acpi_device_id *acpi_match_device(const struct acpi_device_id *ids,
const struct device *dev);
-static inline bool acpi_driver_match_device(struct device *dev,
- const struct device_driver *drv)
-{
- return !!acpi_match_device(drv->acpi_match_table, dev);
-}
-
+extern bool acpi_driver_match_device(struct device *dev,
+ const struct device_driver *drv);
int acpi_device_uevent_modalias(struct device *, struct kobj_uevent_env *);
int acpi_device_modalias(struct device *, char *, int);
+void acpi_walk_dep_device_list(acpi_handle handle);
struct platform_device *acpi_create_platform_device(struct acpi_device *);
#define ACPI_PTR(_ptr) (_ptr)
@@ -443,6 +445,23 @@ struct platform_device *acpi_create_platform_device(struct acpi_device *);
#define ACPI_COMPANION_SET(dev, adev) do { } while (0)
#define ACPI_HANDLE(dev) (NULL)
+struct fwnode_handle;
+
+static inline bool is_acpi_node(struct fwnode_handle *fwnode)
+{
+ return false;
+}
+
+static inline struct acpi_device *acpi_node(struct fwnode_handle *fwnode)
+{
+ return NULL;
+}
+
+static inline struct fwnode_handle *acpi_fwnode_handle(struct acpi_device *adev)
+{
+ return NULL;
+}
+
static inline const char *acpi_dev_name(struct acpi_device *adev)
{
return NULL;
@@ -553,16 +572,26 @@ static inline void arch_reserve_mem_area(acpi_physical_address addr,
#define acpi_os_set_prepare_sleep(func, pm1a_ctrl, pm1b_ctrl) do { } while (0)
#endif
-#if defined(CONFIG_ACPI) && defined(CONFIG_PM_RUNTIME)
+#if defined(CONFIG_ACPI) && defined(CONFIG_PM)
int acpi_dev_runtime_suspend(struct device *dev);
int acpi_dev_runtime_resume(struct device *dev);
int acpi_subsys_runtime_suspend(struct device *dev);
int acpi_subsys_runtime_resume(struct device *dev);
+struct acpi_device *acpi_dev_pm_get_node(struct device *dev);
+int acpi_dev_pm_attach(struct device *dev, bool power_on);
#else
static inline int acpi_dev_runtime_suspend(struct device *dev) { return 0; }
static inline int acpi_dev_runtime_resume(struct device *dev) { return 0; }
static inline int acpi_subsys_runtime_suspend(struct device *dev) { return 0; }
static inline int acpi_subsys_runtime_resume(struct device *dev) { return 0; }
+static inline struct acpi_device *acpi_dev_pm_get_node(struct device *dev)
+{
+ return NULL;
+}
+static inline int acpi_dev_pm_attach(struct device *dev, bool power_on)
+{
+ return -ENODEV;
+}
#endif
#if defined(CONFIG_ACPI) && defined(CONFIG_PM_SLEEP)
@@ -585,20 +614,6 @@ static inline int acpi_subsys_suspend(struct device *dev) { return 0; }
static inline int acpi_subsys_freeze(struct device *dev) { return 0; }
#endif
-#if defined(CONFIG_ACPI) && defined(CONFIG_PM)
-struct acpi_device *acpi_dev_pm_get_node(struct device *dev);
-int acpi_dev_pm_attach(struct device *dev, bool power_on);
-#else
-static inline struct acpi_device *acpi_dev_pm_get_node(struct device *dev)
-{
- return NULL;
-}
-static inline int acpi_dev_pm_attach(struct device *dev, bool power_on)
-{
- return -ENODEV;
-}
-#endif
-
#ifdef CONFIG_ACPI
__printf(3, 4)
void acpi_handle_printk(const char *level, acpi_handle handle,
@@ -659,4 +674,114 @@ do { \
#endif
#endif
+struct acpi_gpio_params {
+ unsigned int crs_entry_index;
+ unsigned int line_index;
+ bool active_low;
+};
+
+struct acpi_gpio_mapping {
+ const char *name;
+ const struct acpi_gpio_params *data;
+ unsigned int size;
+};
+
+#if defined(CONFIG_ACPI) && defined(CONFIG_GPIOLIB)
+int acpi_dev_add_driver_gpios(struct acpi_device *adev,
+ const struct acpi_gpio_mapping *gpios);
+
+static inline void acpi_dev_remove_driver_gpios(struct acpi_device *adev)
+{
+ if (adev)
+ adev->driver_gpios = NULL;
+}
+#else
+static inline int acpi_dev_add_driver_gpios(struct acpi_device *adev,
+ const struct acpi_gpio_mapping *gpios)
+{
+ return -ENXIO;
+}
+static inline void acpi_dev_remove_driver_gpios(struct acpi_device *adev) {}
+#endif
+
+/* Device properties */
+
+#define MAX_ACPI_REFERENCE_ARGS 8
+struct acpi_reference_args {
+ struct acpi_device *adev;
+ size_t nargs;
+ u64 args[MAX_ACPI_REFERENCE_ARGS];
+};
+
+#ifdef CONFIG_ACPI
+int acpi_dev_get_property(struct acpi_device *adev, const char *name,
+ acpi_object_type type, const union acpi_object **obj);
+int acpi_dev_get_property_array(struct acpi_device *adev, const char *name,
+ acpi_object_type type,
+ const union acpi_object **obj);
+int acpi_dev_get_property_reference(struct acpi_device *adev,
+ const char *name, size_t index,
+ struct acpi_reference_args *args);
+
+int acpi_dev_prop_get(struct acpi_device *adev, const char *propname,
+ void **valptr);
+int acpi_dev_prop_read_single(struct acpi_device *adev, const char *propname,
+ enum dev_prop_type proptype, void *val);
+int acpi_dev_prop_read(struct acpi_device *adev, const char *propname,
+ enum dev_prop_type proptype, void *val, size_t nval);
+
+struct acpi_device *acpi_get_next_child(struct device *dev,
+ struct acpi_device *child);
+#else
+static inline int acpi_dev_get_property(struct acpi_device *adev,
+ const char *name, acpi_object_type type,
+ const union acpi_object **obj)
+{
+ return -ENXIO;
+}
+static inline int acpi_dev_get_property_array(struct acpi_device *adev,
+ const char *name,
+ acpi_object_type type,
+ const union acpi_object **obj)
+{
+ return -ENXIO;
+}
+static inline int acpi_dev_get_property_reference(struct acpi_device *adev,
+ const char *name, const char *cells_name,
+ size_t index, struct acpi_reference_args *args)
+{
+ return -ENXIO;
+}
+
+static inline int acpi_dev_prop_get(struct acpi_device *adev,
+ const char *propname,
+ void **valptr)
+{
+ return -ENXIO;
+}
+
+static inline int acpi_dev_prop_read_single(struct acpi_device *adev,
+ const char *propname,
+ enum dev_prop_type proptype,
+ void *val)
+{
+ return -ENXIO;
+}
+
+static inline int acpi_dev_prop_read(struct acpi_device *adev,
+ const char *propname,
+ enum dev_prop_type proptype,
+ void *val, size_t nval)
+{
+ return -ENXIO;
+}
+
+static inline struct acpi_device *acpi_get_next_child(struct device *dev,
+ struct acpi_device *child)
+{
+ return NULL;
+}
+
+#endif
+
#endif /*_LINUX_ACPI_H*/
diff --git a/include/linux/blkdev.h b/include/linux/blkdev.h
index 6d76b8b4aa2b..0495e3854247 100644
--- a/include/linux/blkdev.h
+++ b/include/linux/blkdev.h
@@ -398,7 +398,7 @@ struct request_queue {
*/
struct kobject mq_kobj;
-#ifdef CONFIG_PM_RUNTIME
+#ifdef CONFIG_PM
struct device *dev;
int rpm_status;
unsigned int nr_pending;
@@ -1057,7 +1057,7 @@ extern void blk_put_queue(struct request_queue *);
/*
* block layer runtime pm functions
*/
-#ifdef CONFIG_PM_RUNTIME
+#ifdef CONFIG_PM
extern void blk_pm_runtime_init(struct request_queue *q, struct device *dev);
extern int blk_pre_runtime_suspend(struct request_queue *q);
extern void blk_post_runtime_suspend(struct request_queue *q, int err);
diff --git a/include/linux/cpufreq.h b/include/linux/cpufreq.h
index 503b085b7832..4d078cebafd2 100644
--- a/include/linux/cpufreq.h
+++ b/include/linux/cpufreq.h
@@ -217,26 +217,26 @@ __ATTR(_name, 0644, show_##_name, store_##_name)
struct cpufreq_driver {
- char name[CPUFREQ_NAME_LEN];
- u8 flags;
- void *driver_data;
+ char name[CPUFREQ_NAME_LEN];
+ u8 flags;
+ void *driver_data;
/* needed by all drivers */
- int (*init) (struct cpufreq_policy *policy);
- int (*verify) (struct cpufreq_policy *policy);
+ int (*init)(struct cpufreq_policy *policy);
+ int (*verify)(struct cpufreq_policy *policy);
/* define one out of two */
- int (*setpolicy) (struct cpufreq_policy *policy);
+ int (*setpolicy)(struct cpufreq_policy *policy);
/*
* On failure, should always restore frequency to policy->restore_freq
* (i.e. old freq).
*/
- int (*target) (struct cpufreq_policy *policy, /* Deprecated */
- unsigned int target_freq,
- unsigned int relation);
- int (*target_index) (struct cpufreq_policy *policy,
- unsigned int index);
+ int (*target)(struct cpufreq_policy *policy,
+ unsigned int target_freq,
+ unsigned int relation); /* Deprecated */
+ int (*target_index)(struct cpufreq_policy *policy,
+ unsigned int index);
/*
* Only for drivers with target_index() and CPUFREQ_ASYNC_NOTIFICATION
* unset.
@@ -252,27 +252,31 @@ struct cpufreq_driver {
* wish to switch to intermediate frequency for some target frequency.
* In that case core will directly call ->target_index().
*/
- unsigned int (*get_intermediate)(struct cpufreq_policy *policy,
- unsigned int index);
- int (*target_intermediate)(struct cpufreq_policy *policy,
- unsigned int index);
+ unsigned int (*get_intermediate)(struct cpufreq_policy *policy,
+ unsigned int index);
+ int (*target_intermediate)(struct cpufreq_policy *policy,
+ unsigned int index);
/* should be defined, if possible */
- unsigned int (*get) (unsigned int cpu);
+ unsigned int (*get)(unsigned int cpu);
/* optional */
- int (*bios_limit) (int cpu, unsigned int *limit);
+ int (*bios_limit)(int cpu, unsigned int *limit);
+
+ int (*exit)(struct cpufreq_policy *policy);
+ void (*stop_cpu)(struct cpufreq_policy *policy);
+ int (*suspend)(struct cpufreq_policy *policy);
+ int (*resume)(struct cpufreq_policy *policy);
+
+ /* Will be called after the driver is fully initialized */
+ void (*ready)(struct cpufreq_policy *policy);
- int (*exit) (struct cpufreq_policy *policy);
- void (*stop_cpu) (struct cpufreq_policy *policy);
- int (*suspend) (struct cpufreq_policy *policy);
- int (*resume) (struct cpufreq_policy *policy);
- struct freq_attr **attr;
+ struct freq_attr **attr;
/* platform specific boost support code */
- bool boost_supported;
- bool boost_enabled;
- int (*set_boost) (int state);
+ bool boost_supported;
+ bool boost_enabled;
+ int (*set_boost)(int state);
};
/* flags */
diff --git a/include/linux/cpuidle.h b/include/linux/cpuidle.h
index 25e0df6155a4..a07e087f54b2 100644
--- a/include/linux/cpuidle.h
+++ b/include/linux/cpuidle.h
@@ -53,7 +53,7 @@ struct cpuidle_state {
};
/* Idle State Flags */
-#define CPUIDLE_FLAG_TIME_VALID (0x01) /* is residency time measurable? */
+#define CPUIDLE_FLAG_TIME_INVALID (0x01) /* is residency time measurable? */
#define CPUIDLE_FLAG_COUPLED (0x02) /* state applies to multiple cpus */
#define CPUIDLE_FLAG_TIMER_STOP (0x04) /* timer is stopped on this state */
@@ -90,7 +90,7 @@ DECLARE_PER_CPU(struct cpuidle_device, cpuidle_dev);
* cpuidle_get_last_residency - retrieves the last state's residency time
* @dev: the target CPU
*
- * NOTE: this value is invalid if CPUIDLE_FLAG_TIME_VALID isn't set
+ * NOTE: this value is invalid if CPUIDLE_FLAG_TIME_INVALID is set
*/
static inline int cpuidle_get_last_residency(struct cpuidle_device *dev)
{
diff --git a/include/linux/gpio/consumer.h b/include/linux/gpio/consumer.h
index 12f146fa6604..00b1b70d68ba 100644
--- a/include/linux/gpio/consumer.h
+++ b/include/linux/gpio/consumer.h
@@ -94,6 +94,13 @@ int gpiod_to_irq(const struct gpio_desc *desc);
struct gpio_desc *gpio_to_desc(unsigned gpio);
int desc_to_gpio(const struct gpio_desc *desc);
+/* Child properties interface */
+struct fwnode_handle;
+
+struct gpio_desc *fwnode_get_named_gpiod(struct fwnode_handle *fwnode,
+ const char *propname);
+struct gpio_desc *devm_get_gpiod_from_child(struct device *dev,
+ struct fwnode_handle *child);
#else /* CONFIG_GPIOLIB */
static inline struct gpio_desc *__must_check __gpiod_get(struct device *dev,
diff --git a/include/linux/gpio_keys.h b/include/linux/gpio_keys.h
index 8b622468952c..ee2d8c6f9130 100644
--- a/include/linux/gpio_keys.h
+++ b/include/linux/gpio_keys.h
@@ -2,6 +2,7 @@
#define _GPIO_KEYS_H
struct device;
+struct gpio_desc;
/**
* struct gpio_keys_button - configuration parameters
@@ -17,6 +18,7 @@ struct device;
* disable button via sysfs
* @value: axis value for %EV_ABS
* @irq: Irq number in case of interrupt keys
+ * @gpiod: GPIO descriptor
*/
struct gpio_keys_button {
unsigned int code;
@@ -29,6 +31,7 @@ struct gpio_keys_button {
bool can_disable;
int value;
unsigned int irq;
+ struct gpio_desc *gpiod;
};
/**
diff --git a/include/linux/leds.h b/include/linux/leds.h
index a57611d0c94e..361101fef270 100644
--- a/include/linux/leds.h
+++ b/include/linux/leds.h
@@ -261,6 +261,7 @@ struct gpio_led {
unsigned retain_state_suspended : 1;
unsigned default_state : 2;
/* default_state should be one of LEDS_GPIO_DEFSTATE_(ON|OFF|KEEP) */
+ struct gpio_desc *gpiod;
};
#define LEDS_GPIO_DEFSTATE_OFF 0
#define LEDS_GPIO_DEFSTATE_ON 1
@@ -273,7 +274,7 @@ struct gpio_led_platform_data {
#define GPIO_LED_NO_BLINK_LOW 0 /* No blink GPIO state low */
#define GPIO_LED_NO_BLINK_HIGH 1 /* No blink GPIO state high */
#define GPIO_LED_BLINK 2 /* Please, blink */
- int (*gpio_blink_set)(unsigned gpio, int state,
+ int (*gpio_blink_set)(struct gpio_desc *desc, int state,
unsigned long *delay_on,
unsigned long *delay_off);
};
diff --git a/include/linux/of.h b/include/linux/of.h
index c55b50018ac4..1a66b8881c01 100644
--- a/include/linux/of.h
+++ b/include/linux/of.h
@@ -23,6 +23,7 @@
#include <linux/spinlock.h>
#include <linux/topology.h>
#include <linux/notifier.h>
+#include <linux/property.h>
#include <asm/byteorder.h>
#include <asm/errno.h>
@@ -49,6 +50,7 @@ struct device_node {
const char *type;
phandle phandle;
const char *full_name;
+ struct fwnode_handle fwnode;
struct property *properties;
struct property *deadprops; /* removed properties */
@@ -79,6 +81,7 @@ extern struct kobj_type of_node_ktype;
static inline void of_node_init(struct device_node *node)
{
kobject_init(&node->kobj, &of_node_ktype);
+ node->fwnode.type = FWNODE_OF;
}
/* true when node is initialized */
@@ -114,6 +117,16 @@ extern struct device_node *of_aliases;
extern struct device_node *of_stdout;
extern raw_spinlock_t devtree_lock;
+static inline bool is_of_node(struct fwnode_handle *fwnode)
+{
+ return fwnode && fwnode->type == FWNODE_OF;
+}
+
+static inline struct device_node *of_node(struct fwnode_handle *fwnode)
+{
+ return fwnode ? container_of(fwnode, struct device_node, fwnode) : NULL;
+}
+
static inline bool of_have_populated_dt(void)
{
return of_allnodes != NULL;
@@ -263,6 +276,10 @@ extern int of_property_read_u32_array(const struct device_node *np,
size_t sz);
extern int of_property_read_u64(const struct device_node *np,
const char *propname, u64 *out_value);
+extern int of_property_read_u64_array(const struct device_node *np,
+ const char *propname,
+ u64 *out_values,
+ size_t sz);
extern int of_property_read_string(struct device_node *np,
const char *propname,
@@ -355,6 +372,16 @@ bool of_console_check(struct device_node *dn, char *name, int index);
#else /* CONFIG_OF */
+static inline bool is_of_node(struct fwnode_handle *fwnode)
+{
+ return false;
+}
+
+static inline struct device_node *of_node(struct fwnode_handle *fwnode)
+{
+ return NULL;
+}
+
static inline const char* of_node_full_name(const struct device_node *np)
{
return "<no-node>";
@@ -477,6 +504,13 @@ static inline int of_property_read_u32_array(const struct device_node *np,
return -ENOSYS;
}
+static inline int of_property_read_u64_array(const struct device_node *np,
+ const char *propname,
+ u64 *out_values, size_t sz)
+{
+ return -ENOSYS;
+}
+
static inline int of_property_read_string(struct device_node *np,
const char *propname,
const char **out_string)
diff --git a/include/linux/pm.h b/include/linux/pm.h
index 383fd68aaee1..66a656eb335b 100644
--- a/include/linux/pm.h
+++ b/include/linux/pm.h
@@ -342,7 +342,7 @@ struct dev_pm_ops {
#define SET_LATE_SYSTEM_SLEEP_PM_OPS(suspend_fn, resume_fn)
#endif
-#ifdef CONFIG_PM_RUNTIME
+#ifdef CONFIG_PM
#define SET_RUNTIME_PM_OPS(suspend_fn, resume_fn, idle_fn) \
.runtime_suspend = suspend_fn, \
.runtime_resume = resume_fn, \
@@ -351,14 +351,7 @@ struct dev_pm_ops {
#define SET_RUNTIME_PM_OPS(suspend_fn, resume_fn, idle_fn)
#endif
-#ifdef CONFIG_PM
-#define SET_PM_RUNTIME_PM_OPS(suspend_fn, resume_fn, idle_fn) \
- .runtime_suspend = suspend_fn, \
- .runtime_resume = resume_fn, \
- .runtime_idle = idle_fn,
-#else
-#define SET_PM_RUNTIME_PM_OPS(suspend_fn, resume_fn, idle_fn)
-#endif
+#define SET_PM_RUNTIME_PM_OPS SET_RUNTIME_PM_OPS
/*
* Use this if you want to use the same suspend and resume callbacks for suspend
@@ -538,11 +531,7 @@ enum rpm_request {
};
struct wakeup_source;
-
-struct pm_domain_data {
- struct list_head list_node;
- struct device *dev;
-};
+struct pm_domain_data;
struct pm_subsys_data {
spinlock_t lock;
@@ -576,7 +565,7 @@ struct dev_pm_info {
#else
unsigned int should_wakeup:1;
#endif
-#ifdef CONFIG_PM_RUNTIME
+#ifdef CONFIG_PM
struct timer_list suspend_timer;
unsigned long timer_expires;
struct work_struct work;
diff --git a/include/linux/pm_clock.h b/include/linux/pm_clock.h
index 8348866e7b05..0b0039634410 100644
--- a/include/linux/pm_clock.h
+++ b/include/linux/pm_clock.h
@@ -18,6 +18,8 @@ struct pm_clk_notifier_block {
char *con_ids[];
};
+struct clk;
+
#ifdef CONFIG_PM_CLK
static inline bool pm_clk_no_clocks(struct device *dev)
{
@@ -29,6 +31,7 @@ extern void pm_clk_init(struct device *dev);
extern int pm_clk_create(struct device *dev);
extern void pm_clk_destroy(struct device *dev);
extern int pm_clk_add(struct device *dev, const char *con_id);
+extern int pm_clk_add_clk(struct device *dev, struct clk *clk);
extern void pm_clk_remove(struct device *dev, const char *con_id);
extern int pm_clk_suspend(struct device *dev);
extern int pm_clk_resume(struct device *dev);
@@ -51,6 +54,11 @@ static inline int pm_clk_add(struct device *dev, const char *con_id)
{
return -EINVAL;
}
+
+static inline int pm_clk_add_clk(struct device *dev, struct clk *clk)
+{
+ return -EINVAL;
+}
static inline void pm_clk_remove(struct device *dev, const char *con_id)
{
}
diff --git a/include/linux/pm_domain.h b/include/linux/pm_domain.h
index 2e0e06daf8c0..6cd20d5e651b 100644
--- a/include/linux/pm_domain.h
+++ b/include/linux/pm_domain.h
@@ -17,6 +17,9 @@
#include <linux/notifier.h>
#include <linux/cpuidle.h>
+/* Defines used for the flags field in the struct generic_pm_domain */
+#define GENPD_FLAG_PM_CLK (1U << 0) /* PM domain uses PM clk */
+
enum gpd_status {
GPD_STATE_ACTIVE = 0, /* PM domain is active */
GPD_STATE_WAIT_MASTER, /* PM domain's master is being waited for */
@@ -76,6 +79,7 @@ struct generic_pm_domain {
struct device *dev);
void (*detach_dev)(struct generic_pm_domain *domain,
struct device *dev);
+ unsigned int flags; /* Bit field of configs for genpd */
};
static inline struct generic_pm_domain *pd_to_genpd(struct dev_pm_domain *pd)
@@ -100,6 +104,11 @@ struct gpd_timing_data {
bool cached_stop_ok;
};
+struct pm_domain_data {
+ struct list_head list_node;
+ struct device *dev;
+};
+
struct generic_pm_domain_data {
struct pm_domain_data base;
struct gpd_timing_data td;
@@ -147,6 +156,7 @@ extern void pm_genpd_init(struct generic_pm_domain *genpd,
extern int pm_genpd_poweron(struct generic_pm_domain *genpd);
extern int pm_genpd_name_poweron(const char *domain_name);
+extern void pm_genpd_poweroff_unused(void);
extern struct dev_power_governor simple_qos_governor;
extern struct dev_power_governor pm_domain_always_on_gov;
@@ -221,6 +231,7 @@ static inline int pm_genpd_name_poweron(const char *domain_name)
{
return -ENOSYS;
}
+static inline void pm_genpd_poweroff_unused(void) {}
#define simple_qos_governor NULL
#define pm_domain_always_on_gov NULL
#endif
@@ -237,12 +248,6 @@ static inline int pm_genpd_name_add_device(const char *domain_name,
return __pm_genpd_name_add_device(domain_name, dev, NULL);
}
-#ifdef CONFIG_PM_GENERIC_DOMAINS_RUNTIME
-extern void pm_genpd_poweroff_unused(void);
-#else
-static inline void pm_genpd_poweroff_unused(void) {}
-#endif
-
#ifdef CONFIG_PM_GENERIC_DOMAINS_SLEEP
extern void pm_genpd_syscore_poweroff(struct device *dev);
extern void pm_genpd_syscore_poweron(struct device *dev);
diff --git a/include/linux/pm_opp.h b/include/linux/pm_opp.h
index 0330217abfad..cec2d4540914 100644
--- a/include/linux/pm_opp.h
+++ b/include/linux/pm_opp.h
@@ -21,7 +21,7 @@ struct dev_pm_opp;
struct device;
enum dev_pm_opp_event {
- OPP_EVENT_ADD, OPP_EVENT_ENABLE, OPP_EVENT_DISABLE,
+ OPP_EVENT_ADD, OPP_EVENT_REMOVE, OPP_EVENT_ENABLE, OPP_EVENT_DISABLE,
};
#if defined(CONFIG_PM_OPP)
@@ -44,6 +44,7 @@ struct dev_pm_opp *dev_pm_opp_find_freq_ceil(struct device *dev,
int dev_pm_opp_add(struct device *dev, unsigned long freq,
unsigned long u_volt);
+void dev_pm_opp_remove(struct device *dev, unsigned long freq);
int dev_pm_opp_enable(struct device *dev, unsigned long freq);
@@ -90,6 +91,10 @@ static inline int dev_pm_opp_add(struct device *dev, unsigned long freq,
return -EINVAL;
}
+static inline void dev_pm_opp_remove(struct device *dev, unsigned long freq)
+{
+}
+
static inline int dev_pm_opp_enable(struct device *dev, unsigned long freq)
{
return 0;
@@ -109,11 +114,16 @@ static inline struct srcu_notifier_head *dev_pm_opp_get_notifier(
#if defined(CONFIG_PM_OPP) && defined(CONFIG_OF)
int of_init_opp_table(struct device *dev);
+void of_free_opp_table(struct device *dev);
#else
static inline int of_init_opp_table(struct device *dev)
{
return -EINVAL;
}
+
+static inline void of_free_opp_table(struct device *dev)
+{
+}
#endif
#endif /* __LINUX_OPP_H__ */
diff --git a/include/linux/pm_qos.h b/include/linux/pm_qos.h
index 636e82834506..7b3ae0cffc05 100644
--- a/include/linux/pm_qos.h
+++ b/include/linux/pm_qos.h
@@ -154,6 +154,23 @@ void dev_pm_qos_constraints_destroy(struct device *dev);
int dev_pm_qos_add_ancestor_request(struct device *dev,
struct dev_pm_qos_request *req,
enum dev_pm_qos_req_type type, s32 value);
+int dev_pm_qos_expose_latency_limit(struct device *dev, s32 value);
+void dev_pm_qos_hide_latency_limit(struct device *dev);
+int dev_pm_qos_expose_flags(struct device *dev, s32 value);
+void dev_pm_qos_hide_flags(struct device *dev);
+int dev_pm_qos_update_flags(struct device *dev, s32 mask, bool set);
+s32 dev_pm_qos_get_user_latency_tolerance(struct device *dev);
+int dev_pm_qos_update_user_latency_tolerance(struct device *dev, s32 val);
+
+static inline s32 dev_pm_qos_requested_resume_latency(struct device *dev)
+{
+ return dev->power.qos->resume_latency_req->data.pnode.prio;
+}
+
+static inline s32 dev_pm_qos_requested_flags(struct device *dev)
+{
+ return dev->power.qos->flags_req->data.flr.flags;
+}
#else
static inline enum pm_qos_flags_status __dev_pm_qos_flags(struct device *dev,
s32 mask)
@@ -200,27 +217,6 @@ static inline int dev_pm_qos_add_ancestor_request(struct device *dev,
enum dev_pm_qos_req_type type,
s32 value)
{ return 0; }
-#endif
-
-#ifdef CONFIG_PM_RUNTIME
-int dev_pm_qos_expose_latency_limit(struct device *dev, s32 value);
-void dev_pm_qos_hide_latency_limit(struct device *dev);
-int dev_pm_qos_expose_flags(struct device *dev, s32 value);
-void dev_pm_qos_hide_flags(struct device *dev);
-int dev_pm_qos_update_flags(struct device *dev, s32 mask, bool set);
-s32 dev_pm_qos_get_user_latency_tolerance(struct device *dev);
-int dev_pm_qos_update_user_latency_tolerance(struct device *dev, s32 val);
-
-static inline s32 dev_pm_qos_requested_resume_latency(struct device *dev)
-{
- return dev->power.qos->resume_latency_req->data.pnode.prio;
-}
-
-static inline s32 dev_pm_qos_requested_flags(struct device *dev)
-{
- return dev->power.qos->flags_req->data.flr.flags;
-}
-#else
static inline int dev_pm_qos_expose_latency_limit(struct device *dev, s32 value)
{ return 0; }
static inline void dev_pm_qos_hide_latency_limit(struct device *dev) {}
diff --git a/include/linux/pm_runtime.h b/include/linux/pm_runtime.h
index 367f49b9a1c9..eda4feede048 100644
--- a/include/linux/pm_runtime.h
+++ b/include/linux/pm_runtime.h
@@ -35,16 +35,6 @@ extern int pm_generic_runtime_suspend(struct device *dev);
extern int pm_generic_runtime_resume(struct device *dev);
extern int pm_runtime_force_suspend(struct device *dev);
extern int pm_runtime_force_resume(struct device *dev);
-#else
-static inline bool queue_pm_work(struct work_struct *work) { return false; }
-
-static inline int pm_generic_runtime_suspend(struct device *dev) { return 0; }
-static inline int pm_generic_runtime_resume(struct device *dev) { return 0; }
-static inline int pm_runtime_force_suspend(struct device *dev) { return 0; }
-static inline int pm_runtime_force_resume(struct device *dev) { return 0; }
-#endif
-
-#ifdef CONFIG_PM_RUNTIME
extern int __pm_runtime_idle(struct device *dev, int rpmflags);
extern int __pm_runtime_suspend(struct device *dev, int rpmflags);
@@ -128,7 +118,14 @@ static inline void pm_runtime_mark_last_busy(struct device *dev)
ACCESS_ONCE(dev->power.last_busy) = jiffies;
}
-#else /* !CONFIG_PM_RUNTIME */
+#else /* !CONFIG_PM */
+
+static inline bool queue_pm_work(struct work_struct *work) { return false; }
+
+static inline int pm_generic_runtime_suspend(struct device *dev) { return 0; }
+static inline int pm_generic_runtime_resume(struct device *dev) { return 0; }
+static inline int pm_runtime_force_suspend(struct device *dev) { return 0; }
+static inline int pm_runtime_force_resume(struct device *dev) { return 0; }
static inline int __pm_runtime_idle(struct device *dev, int rpmflags)
{
@@ -179,7 +176,7 @@ static inline unsigned long pm_runtime_autosuspend_expiration(
static inline void pm_runtime_set_memalloc_noio(struct device *dev,
bool enable){}
-#endif /* !CONFIG_PM_RUNTIME */
+#endif /* !CONFIG_PM */
static inline int pm_runtime_idle(struct device *dev)
{
diff --git a/include/linux/property.h b/include/linux/property.h
new file mode 100644
index 000000000000..a6a3d98bd7e9
--- /dev/null
+++ b/include/linux/property.h
@@ -0,0 +1,143 @@
+/*
+ * property.h - Unified device property interface.
+ *
+ * Copyright (C) 2014, Intel Corporation
+ * Authors: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
+ * Mika Westerberg <mika.westerberg@linux.intel.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef _LINUX_PROPERTY_H_
+#define _LINUX_PROPERTY_H_
+
+#include <linux/types.h>
+
+struct device;
+
+enum dev_prop_type {
+ DEV_PROP_U8,
+ DEV_PROP_U16,
+ DEV_PROP_U32,
+ DEV_PROP_U64,
+ DEV_PROP_STRING,
+ DEV_PROP_MAX,
+};
+
+bool device_property_present(struct device *dev, const char *propname);
+int device_property_read_u8_array(struct device *dev, const char *propname,
+ u8 *val, size_t nval);
+int device_property_read_u16_array(struct device *dev, const char *propname,
+ u16 *val, size_t nval);
+int device_property_read_u32_array(struct device *dev, const char *propname,
+ u32 *val, size_t nval);
+int device_property_read_u64_array(struct device *dev, const char *propname,
+ u64 *val, size_t nval);
+int device_property_read_string_array(struct device *dev, const char *propname,
+ const char **val, size_t nval);
+int device_property_read_string(struct device *dev, const char *propname,
+ const char **val);
+
+enum fwnode_type {
+ FWNODE_INVALID = 0,
+ FWNODE_OF,
+ FWNODE_ACPI,
+};
+
+struct fwnode_handle {
+ enum fwnode_type type;
+};
+
+bool fwnode_property_present(struct fwnode_handle *fwnode, const char *propname);
+int fwnode_property_read_u8_array(struct fwnode_handle *fwnode,
+ const char *propname, u8 *val,
+ size_t nval);
+int fwnode_property_read_u16_array(struct fwnode_handle *fwnode,
+ const char *propname, u16 *val,
+ size_t nval);
+int fwnode_property_read_u32_array(struct fwnode_handle *fwnode,
+ const char *propname, u32 *val,
+ size_t nval);
+int fwnode_property_read_u64_array(struct fwnode_handle *fwnode,
+ const char *propname, u64 *val,
+ size_t nval);
+int fwnode_property_read_string_array(struct fwnode_handle *fwnode,
+ const char *propname, const char **val,
+ size_t nval);
+int fwnode_property_read_string(struct fwnode_handle *fwnode,
+ const char *propname, const char **val);
+
+struct fwnode_handle *device_get_next_child_node(struct device *dev,
+ struct fwnode_handle *child);
+
+#define device_for_each_child_node(dev, child) \
+ for (child = device_get_next_child_node(dev, NULL); child; \
+ child = device_get_next_child_node(dev, child))
+
+void fwnode_handle_put(struct fwnode_handle *fwnode);
+
+unsigned int device_get_child_node_count(struct device *dev);
+
+static inline bool device_property_read_bool(struct device *dev,
+ const char *propname)
+{
+ return device_property_present(dev, propname);
+}
+
+static inline int device_property_read_u8(struct device *dev,
+ const char *propname, u8 *val)
+{
+ return device_property_read_u8_array(dev, propname, val, 1);
+}
+
+static inline int device_property_read_u16(struct device *dev,
+ const char *propname, u16 *val)
+{
+ return device_property_read_u16_array(dev, propname, val, 1);
+}
+
+static inline int device_property_read_u32(struct device *dev,
+ const char *propname, u32 *val)
+{
+ return device_property_read_u32_array(dev, propname, val, 1);
+}
+
+static inline int device_property_read_u64(struct device *dev,
+ const char *propname, u64 *val)
+{
+ return device_property_read_u64_array(dev, propname, val, 1);
+}
+
+static inline bool fwnode_property_read_bool(struct fwnode_handle *fwnode,
+ const char *propname)
+{
+ return fwnode_property_present(fwnode, propname);
+}
+
+static inline int fwnode_property_read_u8(struct fwnode_handle *fwnode,
+ const char *propname, u8 *val)
+{
+ return fwnode_property_read_u8_array(fwnode, propname, val, 1);
+}
+
+static inline int fwnode_property_read_u16(struct fwnode_handle *fwnode,
+ const char *propname, u16 *val)
+{
+ return fwnode_property_read_u16_array(fwnode, propname, val, 1);
+}
+
+static inline int fwnode_property_read_u32(struct fwnode_handle *fwnode,
+ const char *propname, u32 *val)
+{
+ return fwnode_property_read_u32_array(fwnode, propname, val, 1);
+}
+
+static inline int fwnode_property_read_u64(struct fwnode_handle *fwnode,
+ const char *propname, u64 *val)
+{
+ return fwnode_property_read_u64_array(fwnode, propname, val, 1);
+}
+
+#endif /* _LINUX_PROPERTY_H_ */
diff --git a/include/linux/usb.h b/include/linux/usb.h
index 447a7e2fc19b..f89c24a03bd9 100644
--- a/include/linux/usb.h
+++ b/include/linux/usb.h
@@ -637,7 +637,7 @@ static inline bool usb_acpi_power_manageable(struct usb_device *hdev, int index)
#endif
/* USB autosuspend and autoresume */
-#ifdef CONFIG_PM_RUNTIME
+#ifdef CONFIG_PM
extern void usb_enable_autosuspend(struct usb_device *udev);
extern void usb_disable_autosuspend(struct usb_device *udev);
diff --git a/include/linux/usb/hcd.h b/include/linux/usb/hcd.h
index cd96a2bc3388..668898e29d0e 100644
--- a/include/linux/usb/hcd.h
+++ b/include/linux/usb/hcd.h
@@ -93,7 +93,7 @@ struct usb_hcd {
struct timer_list rh_timer; /* drives root-hub polling */
struct urb *status_urb; /* the current status urb */
-#ifdef CONFIG_PM_RUNTIME
+#ifdef CONFIG_PM
struct work_struct wakeup_work; /* for remote wakeup */
#endif
@@ -625,16 +625,13 @@ extern int usb_find_interface_driver(struct usb_device *dev,
extern void usb_root_hub_lost_power(struct usb_device *rhdev);
extern int hcd_bus_suspend(struct usb_device *rhdev, pm_message_t msg);
extern int hcd_bus_resume(struct usb_device *rhdev, pm_message_t msg);
-#endif /* CONFIG_PM */
-
-#ifdef CONFIG_PM_RUNTIME
extern void usb_hcd_resume_root_hub(struct usb_hcd *hcd);
#else
static inline void usb_hcd_resume_root_hub(struct usb_hcd *hcd)
{
return;
}
-#endif /* CONFIG_PM_RUNTIME */
+#endif /* CONFIG_PM */
/*-------------------------------------------------------------------------*/
diff --git a/kernel/power/Kconfig b/kernel/power/Kconfig
index bbef57f5bdfd..6e7708c2c21f 100644
--- a/kernel/power/Kconfig
+++ b/kernel/power/Kconfig
@@ -94,6 +94,7 @@ config PM_STD_PARTITION
config PM_SLEEP
def_bool y
depends on SUSPEND || HIBERNATE_CALLBACKS
+ select PM_RUNTIME
config PM_SLEEP_SMP
def_bool y
@@ -131,7 +132,6 @@ config PM_WAKELOCKS_GC
config PM_RUNTIME
bool "Run-time PM core functionality"
- depends on !IA64_HP_SIM
---help---
Enable functionality allowing I/O devices to be put into energy-saving
(low power) states at run time (or autosuspended) after a specified
@@ -298,14 +298,9 @@ config PM_GENERIC_DOMAINS_SLEEP
def_bool y
depends on PM_SLEEP && PM_GENERIC_DOMAINS
-config PM_GENERIC_DOMAINS_RUNTIME
- def_bool y
- depends on PM_RUNTIME && PM_GENERIC_DOMAINS
-
config PM_GENERIC_DOMAINS_OF
def_bool y
depends on PM_GENERIC_DOMAINS && OF
config CPU_PM
bool
- depends on SUSPEND || CPU_IDLE
diff --git a/kernel/power/hibernate.c b/kernel/power/hibernate.c
index 1f35a3478f3c..2329daae5255 100644
--- a/kernel/power/hibernate.c
+++ b/kernel/power/hibernate.c
@@ -28,6 +28,7 @@
#include <linux/syscore_ops.h>
#include <linux/ctype.h>
#include <linux/genhd.h>
+#include <linux/ktime.h>
#include <trace/events/power.h>
#include "power.h"
@@ -232,20 +233,17 @@ static void platform_recover(int platform_mode)
* @nr_pages: Number of memory pages processed between @start and @stop.
* @msg: Additional diagnostic message to print.
*/
-void swsusp_show_speed(struct timeval *start, struct timeval *stop,
- unsigned nr_pages, char *msg)
+void swsusp_show_speed(ktime_t start, ktime_t stop,
+ unsigned nr_pages, char *msg)
{
+ ktime_t diff;
u64 elapsed_centisecs64;
unsigned int centisecs;
unsigned int k;
unsigned int kps;
- elapsed_centisecs64 = timeval_to_ns(stop) - timeval_to_ns(start);
- /*
- * If "(s64)elapsed_centisecs64 < 0", it will print long elapsed time,
- * it is obvious enough for what went wrong.
- */
- do_div(elapsed_centisecs64, NSEC_PER_SEC / 100);
+ diff = ktime_sub(stop, start);
+ elapsed_centisecs64 = ktime_divns(diff, 10*NSEC_PER_MSEC);
centisecs = elapsed_centisecs64;
if (centisecs == 0)
centisecs = 1; /* avoid div-by-zero */
diff --git a/kernel/power/power.h b/kernel/power/power.h
index 2df883a9d3cb..ce9b8328a689 100644
--- a/kernel/power/power.h
+++ b/kernel/power/power.h
@@ -174,8 +174,7 @@ extern int hib_wait_on_bio_chain(struct bio **bio_chain);
struct timeval;
/* kernel/power/swsusp.c */
-extern void swsusp_show_speed(struct timeval *, struct timeval *,
- unsigned int, char *);
+extern void swsusp_show_speed(ktime_t, ktime_t, unsigned int, char *);
#ifdef CONFIG_SUSPEND
/* kernel/power/suspend.c */
diff --git a/kernel/power/snapshot.c b/kernel/power/snapshot.c
index 791a61892bb5..0c40c16174b4 100644
--- a/kernel/power/snapshot.c
+++ b/kernel/power/snapshot.c
@@ -28,6 +28,7 @@
#include <linux/list.h>
#include <linux/slab.h>
#include <linux/compiler.h>
+#include <linux/ktime.h>
#include <asm/uaccess.h>
#include <asm/mmu_context.h>
@@ -1576,11 +1577,11 @@ int hibernate_preallocate_memory(void)
struct zone *zone;
unsigned long saveable, size, max_size, count, highmem, pages = 0;
unsigned long alloc, save_highmem, pages_highmem, avail_normal;
- struct timeval start, stop;
+ ktime_t start, stop;
int error;
printk(KERN_INFO "PM: Preallocating image memory... ");
- do_gettimeofday(&start);
+ start = ktime_get();
error = memory_bm_create(&orig_bm, GFP_IMAGE, PG_ANY);
if (error)
@@ -1709,9 +1710,9 @@ int hibernate_preallocate_memory(void)
free_unnecessary_pages();
out:
- do_gettimeofday(&stop);
+ stop = ktime_get();
printk(KERN_CONT "done (allocated %lu pages)\n", pages);
- swsusp_show_speed(&start, &stop, pages, "Allocated");
+ swsusp_show_speed(start, stop, pages, "Allocated");
return 0;
diff --git a/kernel/power/swap.c b/kernel/power/swap.c
index aaa3261dea5d..570aff817543 100644
--- a/kernel/power/swap.c
+++ b/kernel/power/swap.c
@@ -30,6 +30,7 @@
#include <linux/atomic.h>
#include <linux/kthread.h>
#include <linux/crc32.h>
+#include <linux/ktime.h>
#include "power.h"
@@ -445,8 +446,8 @@ static int save_image(struct swap_map_handle *handle,
int nr_pages;
int err2;
struct bio *bio;
- struct timeval start;
- struct timeval stop;
+ ktime_t start;
+ ktime_t stop;
printk(KERN_INFO "PM: Saving image data pages (%u pages)...\n",
nr_to_write);
@@ -455,7 +456,7 @@ static int save_image(struct swap_map_handle *handle,
m = 1;
nr_pages = 0;
bio = NULL;
- do_gettimeofday(&start);
+ start = ktime_get();
while (1) {
ret = snapshot_read_next(snapshot);
if (ret <= 0)
@@ -469,12 +470,12 @@ static int save_image(struct swap_map_handle *handle,
nr_pages++;
}
err2 = hib_wait_on_bio_chain(&bio);
- do_gettimeofday(&stop);
+ stop = ktime_get();
if (!ret)
ret = err2;
if (!ret)
printk(KERN_INFO "PM: Image saving done.\n");
- swsusp_show_speed(&start, &stop, nr_to_write, "Wrote");
+ swsusp_show_speed(start, stop, nr_to_write, "Wrote");
return ret;
}
@@ -580,8 +581,8 @@ static int save_image_lzo(struct swap_map_handle *handle,
int nr_pages;
int err2;
struct bio *bio;
- struct timeval start;
- struct timeval stop;
+ ktime_t start;
+ ktime_t stop;
size_t off;
unsigned thr, run_threads, nr_threads;
unsigned char *page = NULL;
@@ -674,7 +675,7 @@ static int save_image_lzo(struct swap_map_handle *handle,
m = 1;
nr_pages = 0;
bio = NULL;
- do_gettimeofday(&start);
+ start = ktime_get();
for (;;) {
for (thr = 0; thr < nr_threads; thr++) {
for (off = 0; off < LZO_UNC_SIZE; off += PAGE_SIZE) {
@@ -759,12 +760,12 @@ static int save_image_lzo(struct swap_map_handle *handle,
out_finish:
err2 = hib_wait_on_bio_chain(&bio);
- do_gettimeofday(&stop);
+ stop = ktime_get();
if (!ret)
ret = err2;
if (!ret)
printk(KERN_INFO "PM: Image saving done.\n");
- swsusp_show_speed(&start, &stop, nr_to_write, "Wrote");
+ swsusp_show_speed(start, stop, nr_to_write, "Wrote");
out_clean:
if (crc) {
if (crc->thr)
@@ -965,8 +966,8 @@ static int load_image(struct swap_map_handle *handle,
{
unsigned int m;
int ret = 0;
- struct timeval start;
- struct timeval stop;
+ ktime_t start;
+ ktime_t stop;
struct bio *bio;
int err2;
unsigned nr_pages;
@@ -978,7 +979,7 @@ static int load_image(struct swap_map_handle *handle,
m = 1;
nr_pages = 0;
bio = NULL;
- do_gettimeofday(&start);
+ start = ktime_get();
for ( ; ; ) {
ret = snapshot_write_next(snapshot);
if (ret <= 0)
@@ -996,7 +997,7 @@ static int load_image(struct swap_map_handle *handle,
nr_pages++;
}
err2 = hib_wait_on_bio_chain(&bio);
- do_gettimeofday(&stop);
+ stop = ktime_get();
if (!ret)
ret = err2;
if (!ret) {
@@ -1005,7 +1006,7 @@ static int load_image(struct swap_map_handle *handle,
if (!snapshot_image_loaded(snapshot))
ret = -ENODATA;
}
- swsusp_show_speed(&start, &stop, nr_to_read, "Read");
+ swsusp_show_speed(start, stop, nr_to_read, "Read");
return ret;
}
@@ -1067,8 +1068,8 @@ static int load_image_lzo(struct swap_map_handle *handle,
int ret = 0;
int eof = 0;
struct bio *bio;
- struct timeval start;
- struct timeval stop;
+ ktime_t start;
+ ktime_t stop;
unsigned nr_pages;
size_t off;
unsigned i, thr, run_threads, nr_threads;
@@ -1190,7 +1191,7 @@ static int load_image_lzo(struct swap_map_handle *handle,
m = 1;
nr_pages = 0;
bio = NULL;
- do_gettimeofday(&start);
+ start = ktime_get();
ret = snapshot_write_next(snapshot);
if (ret <= 0)
@@ -1343,7 +1344,7 @@ out_finish:
wait_event(crc->done, atomic_read(&crc->stop));
atomic_set(&crc->stop, 0);
}
- do_gettimeofday(&stop);
+ stop = ktime_get();
if (!ret) {
printk(KERN_INFO "PM: Image loading done.\n");
snapshot_write_finalize(snapshot);
@@ -1359,7 +1360,7 @@ out_finish:
}
}
}
- swsusp_show_speed(&start, &stop, nr_to_read, "Read");
+ swsusp_show_speed(start, stop, nr_to_read, "Read");
out_clean:
for (i = 0; i < ring_size; i++)
free_page((unsigned long)page[i]);
@@ -1374,7 +1375,7 @@ out_clean:
kthread_stop(data[thr].thr);
vfree(data);
}
- if (page) vfree(page);
+ vfree(page);
return ret;
}
diff --git a/net/rfkill/rfkill-gpio.c b/net/rfkill/rfkill-gpio.c
index 0f62326c0f5e..2a4717967502 100644
--- a/net/rfkill/rfkill-gpio.c
+++ b/net/rfkill/rfkill-gpio.c
@@ -63,6 +63,15 @@ static const struct rfkill_ops rfkill_gpio_ops = {
.set_block = rfkill_gpio_set_power,
};
+static const struct acpi_gpio_params reset_gpios = { 0, 0, false };
+static const struct acpi_gpio_params shutdown_gpios = { 1, 0, false };
+
+static const struct acpi_gpio_mapping acpi_rfkill_default_gpios[] = {
+ { "reset-gpios", &reset_gpios, 1 },
+ { "shutdown-gpios", &shutdown_gpios, 1 },
+ { },
+};
+
static int rfkill_gpio_acpi_probe(struct device *dev,
struct rfkill_gpio_data *rfkill)
{
@@ -75,7 +84,8 @@ static int rfkill_gpio_acpi_probe(struct device *dev,
rfkill->name = dev_name(dev);
rfkill->type = (unsigned)id->driver_data;
- return 0;
+ return acpi_dev_add_driver_gpios(ACPI_COMPANION(dev),
+ acpi_rfkill_default_gpios);
}
static int rfkill_gpio_probe(struct platform_device *pdev)
@@ -102,7 +112,7 @@ static int rfkill_gpio_probe(struct platform_device *pdev)
rfkill->clk = devm_clk_get(&pdev->dev, NULL);
- gpio = devm_gpiod_get_index(&pdev->dev, "reset", 0);
+ gpio = devm_gpiod_get(&pdev->dev, "reset");
if (!IS_ERR(gpio)) {
ret = gpiod_direction_output(gpio, 0);
if (ret)
@@ -110,7 +120,7 @@ static int rfkill_gpio_probe(struct platform_device *pdev)
rfkill->reset_gpio = gpio;
}
- gpio = devm_gpiod_get_index(&pdev->dev, "shutdown", 1);
+ gpio = devm_gpiod_get(&pdev->dev, "shutdown");
if (!IS_ERR(gpio)) {
ret = gpiod_direction_output(gpio, 0);
if (ret)
@@ -150,6 +160,8 @@ static int rfkill_gpio_remove(struct platform_device *pdev)
rfkill_unregister(rfkill->rfkill_dev);
rfkill_destroy(rfkill->rfkill_dev);
+ acpi_dev_remove_driver_gpios(ACPI_COMPANION(&pdev->dev));
+
return 0;
}
diff --git a/tools/power/cpupower/utils/cpuidle-info.c b/tools/power/cpupower/utils/cpuidle-info.c
index 75e66de7e7a7..458d69b444ad 100644
--- a/tools/power/cpupower/utils/cpuidle-info.c
+++ b/tools/power/cpupower/utils/cpuidle-info.c
@@ -22,13 +22,13 @@
static void cpuidle_cpu_output(unsigned int cpu, int verbose)
{
- unsigned int idlestates, idlestate;
+ int idlestates, idlestate;
char *tmp;
printf(_ ("Analyzing CPU %d:\n"), cpu);
idlestates = sysfs_get_idlestate_count(cpu);
- if (idlestates == 0) {
+ if (idlestates < 1) {
printf(_("CPU %u: No idle states\n"), cpu);
return;
}
@@ -100,10 +100,10 @@ static void cpuidle_general_output(void)
static void proc_cpuidle_cpu_output(unsigned int cpu)
{
long max_allowed_cstate = 2000000000;
- unsigned int cstate, cstates;
+ int cstate, cstates;
cstates = sysfs_get_idlestate_count(cpu);
- if (cstates == 0) {
+ if (cstates < 1) {
printf(_("CPU %u: No C-states info\n"), cpu);
return;
}