Merge tag 'm68knommu-for-v5.19' of git://git.kernel.org/pub/scm/linux/kernel/git/gerg/m68knommu

Pull m68knommu updates from Greg Ungerer:
 "A collection of changes to add elf-fdpic loader support for m68k.

  Also a collection of various fixes. They include typo corrections,
  undefined symbol compilation fixes, removal of the ISA_DMA_API support
  and removal of unused code.

  Summary:

   - correctly set up ZERO_PAGE pointer

   - drop ISA_DMA_API support

   - fix comment typos

   - fixes for undefined symbols

   - remove unused code and variables

   - elf-fdpic loader support for m68k"

* tag 'm68knommu-for-v5.19' of git://git.kernel.org/pub/scm/linux/kernel/git/gerg/m68knommu:
  m68knommu: fix 68000 CPU link with no platform selected
  m68k: removed unused "mach_get_ss"
  m68knommu: fix undefined reference to `mach_get_rtc_pll'
  m68knommu: fix undefined reference to `_init_sp'
  m68knommu: allow elf_fdpic loader to be selected
  m68knommu: add definitions to support elf_fdpic program loader
  m68knommu: implement minimal regset support
  m68knommu: use asm-generic/mmu.h for nommu setups
  m68k: fix typos in comments
  m68k: coldfire: drop ISA_DMA_API support
  m68knommu: set ZERO_PAGE() to the allocated zeroed page

25 files changed, 93 insertions, 576 deletions

diff --git a/arch/m68k/Kconfig.bus b/arch/m68k/Kconfig.bus
index d1e93a39cd3b..d5c0b2990ee1 100644
--- a/arch/m68k/Kconfig.bus
+++ b/arch/m68k/Kconfig.bus
@@ -56,16 +56,6 @@ config ATARI_ROM_ISA
 	  The only driver currently using this adapter is the EtherNEC
 	  driver for RTL8019AS based NE2000 compatible network cards.
 
-config GENERIC_ISA_DMA
-	def_bool ISA
-
 source "drivers/zorro/Kconfig"
 
 endif
-
-if COLDFIRE
-
-config ISA_DMA_API
-	def_bool !M5272
-
-endif
diff --git a/arch/m68k/Kconfig.cpu b/arch/m68k/Kconfig.cpu
index 3d5da25c73b5..f3aa44156969 100644
--- a/arch/m68k/Kconfig.cpu
+++ b/arch/m68k/Kconfig.cpu
@@ -37,7 +37,7 @@ endchoice
 if M68KCLASSIC
 
 config M68000
-	bool
+	def_bool y
 	depends on !MMU
 	select CPU_HAS_NO_BITFIELDS
 	select CPU_HAS_NO_CAS
diff --git a/arch/m68k/Kconfig.machine b/arch/m68k/Kconfig.machine
index 188a8f8a0104..a1042568b9ad 100644
--- a/arch/m68k/Kconfig.machine
+++ b/arch/m68k/Kconfig.machine
@@ -352,6 +352,7 @@ comment "Machine Options"
 
 config UBOOT
 	bool "Support for U-Boot command line parameters"
+	depends on COLDFIRE
 	help
 	  If you say Y here kernel will try to collect command
 	  line parameters from the initial u-boot stack.
diff --git a/arch/m68k/coldfire/Makefile b/arch/m68k/coldfire/Makefile
index a3e18d73d8b8..9419a6c1f036 100644
--- a/arch/m68k/coldfire/Makefile
+++ b/arch/m68k/coldfire/Makefile
@@ -15,7 +15,7 @@
 
 asflags-$(CONFIG_FULLDEBUG) := -DDEBUGGER_COMPATIBLE_CACHE=1
 
-obj-$(CONFIG_COLDFIRE)	+= cache.o clk.o device.o dma.o entry.o vectors.o
+obj-$(CONFIG_COLDFIRE)	+= cache.o clk.o device.o entry.o vectors.o
 obj-$(CONFIG_M5206)	+= m5206.o intc.o reset.o
 obj-$(CONFIG_M5206e)	+= m5206.o intc.o reset.o
 obj-$(CONFIG_M520x)	+= m520x.o intc-simr.o reset.o
diff --git a/arch/m68k/coldfire/dma.c b/arch/m68k/coldfire/dma.c
deleted file mode 100644
index c3279f7467d7..000000000000
--- a/arch/m68k/coldfire/dma.c
+++ /dev/null
@@ -1,43 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/***************************************************************************/
-
-/*
- *	dma.c -- Freescale ColdFire DMA support
- *
- *	Copyright (C) 2007, Greg Ungerer (gerg@snapgear.com)
- */
-
-/***************************************************************************/
-
-#include <linux/kernel.h>
-#include <linux/module.h>
-#include <asm/dma.h>
-#include <asm/coldfire.h>
-#include <asm/mcfsim.h>
-#include <asm/mcfdma.h>
-
-/***************************************************************************/
-
-/*
- *      DMA channel base address table.
- */
-unsigned int dma_base_addr[MAX_M68K_DMA_CHANNELS] = {
-#ifdef MCFDMA_BASE0
-	MCFDMA_BASE0,
-#endif
-#ifdef MCFDMA_BASE1
-	MCFDMA_BASE1,
-#endif
-#ifdef MCFDMA_BASE2
-	MCFDMA_BASE2,
-#endif
-#ifdef MCFDMA_BASE3
-	MCFDMA_BASE3,
-#endif
-};
-EXPORT_SYMBOL(dma_base_addr);
-
-unsigned int dma_device_address[MAX_M68K_DMA_CHANNELS];
-EXPORT_SYMBOL(dma_device_address);
-
-/***************************************************************************/
diff --git a/arch/m68k/coldfire/intc.c b/arch/m68k/coldfire/intc.c
index cce257420388..20c084e932c8 100644
--- a/arch/m68k/coldfire/intc.c
+++ b/arch/m68k/coldfire/intc.c
@@ -28,7 +28,7 @@
 unsigned char mcf_irq2imr[NR_IRQS];
 
 /*
- * Define the miniumun and maximum external interrupt numbers.
+ * Define the minimum and maximum external interrupt numbers.
  * This is also used as the "level" interrupt numbers.
  */
 #define	EIRQ1	25
diff --git a/arch/m68k/coldfire/m53xx.c b/arch/m68k/coldfire/m53xx.c
index bd033e1975bf..17af5f673796 100644
--- a/arch/m68k/coldfire/m53xx.c
+++ b/arch/m68k/coldfire/m53xx.c
@@ -532,7 +532,7 @@ int clock_pll(int fsys, int flags)
 		writel(readl(MCF_SDRAMC_SDCR) | MCF_SDRAMC_SDCR_CKE,
 			MCF_SDRAMC_SDCR);
 
-	/* Errata - workaround for SDRAM opeartion after exiting LIMP mode */
+	/* Errata - workaround for SDRAM operation after exiting LIMP mode */
 	writel(MCF_SDRAMC_REFRESH, MCF_SDRAMC_LIMP_FIX);
 
 	/* wait for DQS logic to relock */
diff --git a/arch/m68k/coldfire/pci.c b/arch/m68k/coldfire/pci.c
index 84eab0f5e00a..ceb5775b8d23 100644
--- a/arch/m68k/coldfire/pci.c
+++ b/arch/m68k/coldfire/pci.c
@@ -31,7 +31,7 @@ static struct pci_bus *rootbus;
 static unsigned long iospace;
 
 /*
- * We need to be carefull probing on bus 0 (directly connected to host
+ * We need to be careful probing on bus 0 (directly connected to host
  * bridge). We should only access the well defined possible devices in
  * use, ignore aliases and the like.
  */
diff --git a/arch/m68k/hp300/config.c b/arch/m68k/hp300/config.c
index 2c92843397c3..e4bd6913f50e 100644
--- a/arch/m68k/hp300/config.c
+++ b/arch/m68k/hp300/config.c
@@ -240,12 +240,6 @@ static int hp300_hwclk(int op, struct rtc_time *t)
 	return 0;
 }
 
-static unsigned int hp300_get_ss(void)
-{
-	return hp300_rtc_read(RTC_REG_SEC1) * 10 +
-		hp300_rtc_read(RTC_REG_SEC2);
-}
-
 static void __init hp300_init_IRQ(void)
 {
 }
@@ -256,7 +250,6 @@ void __init config_hp300(void)
 	mach_init_IRQ        = hp300_init_IRQ;
 	mach_get_model       = hp300_get_model;
 	mach_hwclk	     = hp300_hwclk;
-	mach_get_ss	     = hp300_get_ss;
 	mach_reset           = hp300_reset;
 #ifdef CONFIG_HEARTBEAT
 	mach_heartbeat       = hp300_pulse;
diff --git a/arch/m68k/include/asm/dma.h b/arch/m68k/include/asm/dma.h
index ae2021964e32..f6c5e0dfb4e5 100644
--- a/arch/m68k/include/asm/dma.h
+++ b/arch/m68k/include/asm/dma.h
@@ -2,493 +2,10 @@
 #ifndef _M68K_DMA_H
 #define _M68K_DMA_H 1
 
-#ifdef CONFIG_COLDFIRE
-/*
- * ColdFire DMA Model:
- *   ColdFire DMA supports two forms of DMA: Single and Dual address. Single
- * address mode emits a source address, and expects that the device will either
- * pick up the data (DMA READ) or source data (DMA WRITE). This implies that
- * the device will place data on the correct byte(s) of the data bus, as the
- * memory transactions are always 32 bits. This implies that only 32 bit
- * devices will find single mode transfers useful. Dual address DMA mode
- * performs two cycles: source read and destination write. ColdFire will
- * align the data so that the device will always get the correct bytes, thus
- * is useful for 8 and 16 bit devices. This is the mode that is supported
- * below.
- *
- * AUG/22/2000 : added support for 32-bit Dual-Address-Mode (K) 2000
- *               Oliver Kamphenkel (O.Kamphenkel@tu-bs.de)
- *
- * AUG/25/2000 : added support for 8, 16 and 32-bit Single-Address-Mode (K)2000
- *               Oliver Kamphenkel (O.Kamphenkel@tu-bs.de)
- *
- * APR/18/2002 : added proper support for MCF5272 DMA controller.
- *               Arthur Shipkowski (art@videon-central.com)
- */
-
-#include <asm/coldfire.h>
-#include <asm/mcfsim.h>
-#include <asm/mcfdma.h>
-
-/*
- * Set number of channels of DMA on ColdFire for different implementations.
- */
-#if defined(CONFIG_M5249) || defined(CONFIG_M5307) || defined(CONFIG_M5407) || \
-	defined(CONFIG_M523x) || defined(CONFIG_M527x) || \
-	defined(CONFIG_M528x) || defined(CONFIG_M525x)
-
-#define MAX_M68K_DMA_CHANNELS 4
-#elif defined(CONFIG_M5272)
-#define MAX_M68K_DMA_CHANNELS 1
-#elif defined(CONFIG_M53xx)
-#define MAX_M68K_DMA_CHANNELS 0
-#else
-#define MAX_M68K_DMA_CHANNELS 2
-#endif
-
-extern unsigned int dma_base_addr[MAX_M68K_DMA_CHANNELS];
-extern unsigned int dma_device_address[MAX_M68K_DMA_CHANNELS];
-
-#if !defined(CONFIG_M5272)
-#define DMA_MODE_WRITE_BIT  0x01  /* Memory/IO to IO/Memory select */
-#define DMA_MODE_WORD_BIT   0x02  /* 8 or 16 bit transfers */
-#define DMA_MODE_LONG_BIT   0x04  /* or 32 bit transfers */
-#define DMA_MODE_SINGLE_BIT 0x08  /* single-address-mode */
-
-/* I/O to memory, 8 bits, mode */
-#define DMA_MODE_READ	            0
-/* memory to I/O, 8 bits, mode */
-#define DMA_MODE_WRITE	            1
-/* I/O to memory, 16 bits, mode */
-#define DMA_MODE_READ_WORD          2
-/* memory to I/O, 16 bits, mode */
-#define DMA_MODE_WRITE_WORD         3
-/* I/O to memory, 32 bits, mode */
-#define DMA_MODE_READ_LONG          4
-/* memory to I/O, 32 bits, mode */
-#define DMA_MODE_WRITE_LONG         5
-/* I/O to memory, 8 bits, single-address-mode */
-#define DMA_MODE_READ_SINGLE        8
-/* memory to I/O, 8 bits, single-address-mode */
-#define DMA_MODE_WRITE_SINGLE       9
-/* I/O to memory, 16 bits, single-address-mode */
-#define DMA_MODE_READ_WORD_SINGLE  10
-/* memory to I/O, 16 bits, single-address-mode */
-#define DMA_MODE_WRITE_WORD_SINGLE 11
-/* I/O to memory, 32 bits, single-address-mode */
-#define DMA_MODE_READ_LONG_SINGLE  12
-/* memory to I/O, 32 bits, single-address-mode */
-#define DMA_MODE_WRITE_LONG_SINGLE 13
-
-#else /* CONFIG_M5272 is defined */
-
-/* Source static-address mode */
-#define DMA_MODE_SRC_SA_BIT 0x01
-/* Two bits to select between all four modes */
-#define DMA_MODE_SSIZE_MASK 0x06
-/* Offset to shift bits in */
-#define DMA_MODE_SSIZE_OFF  0x01
-/* Destination static-address mode */
-#define DMA_MODE_DES_SA_BIT 0x10
-/* Two bits to select between all four modes */
-#define DMA_MODE_DSIZE_MASK 0x60
-/* Offset to shift bits in */
-#define DMA_MODE_DSIZE_OFF  0x05
-/* Size modifiers */
-#define DMA_MODE_SIZE_LONG  0x00
-#define DMA_MODE_SIZE_BYTE  0x01
-#define DMA_MODE_SIZE_WORD  0x02
-#define DMA_MODE_SIZE_LINE  0x03
-
-/*
- * Aliases to help speed quick ports; these may be suboptimal, however. They
- * do not include the SINGLE mode modifiers since the MCF5272 does not have a
- * mode where the device is in control of its addressing.
- */
-
-/* I/O to memory, 8 bits, mode */
-#define DMA_MODE_READ	              ((DMA_MODE_SIZE_BYTE << DMA_MODE_DSIZE_OFF) | (DMA_MODE_SIZE_BYTE << DMA_MODE_SSIZE_OFF) | DMA_SRC_SA_BIT)
-/* memory to I/O, 8 bits, mode */
-#define DMA_MODE_WRITE	            ((DMA_MODE_SIZE_BYTE << DMA_MODE_DSIZE_OFF) | (DMA_MODE_SIZE_BYTE << DMA_MODE_SSIZE_OFF) | DMA_DES_SA_BIT)
-/* I/O to memory, 16 bits, mode */
-#define DMA_MODE_READ_WORD	        ((DMA_MODE_SIZE_WORD << DMA_MODE_DSIZE_OFF) | (DMA_MODE_SIZE_WORD << DMA_MODE_SSIZE_OFF) | DMA_SRC_SA_BIT)
-/* memory to I/O, 16 bits, mode */
-#define DMA_MODE_WRITE_WORD         ((DMA_MODE_SIZE_WORD << DMA_MODE_DSIZE_OFF) | (DMA_MODE_SIZE_WORD << DMA_MODE_SSIZE_OFF) | DMA_DES_SA_BIT)
-/* I/O to memory, 32 bits, mode */
-#define DMA_MODE_READ_LONG	        ((DMA_MODE_SIZE_LONG << DMA_MODE_DSIZE_OFF) | (DMA_MODE_SIZE_LONG << DMA_MODE_SSIZE_OFF) | DMA_SRC_SA_BIT)
-/* memory to I/O, 32 bits, mode */
-#define DMA_MODE_WRITE_LONG         ((DMA_MODE_SIZE_LONG << DMA_MODE_DSIZE_OFF) | (DMA_MODE_SIZE_LONG << DMA_MODE_SSIZE_OFF) | DMA_DES_SA_BIT)
-
-#endif /* !defined(CONFIG_M5272) */
-
-#if !defined(CONFIG_M5272)
-/* enable/disable a specific DMA channel */
-static __inline__ void enable_dma(unsigned int dmanr)
-{
-  volatile unsigned short *dmawp;
-
-#ifdef DMA_DEBUG
-  printk("enable_dma(dmanr=%d)\n", dmanr);
-#endif
-
-  dmawp = (unsigned short *) dma_base_addr[dmanr];
-  dmawp[MCFDMA_DCR] |= MCFDMA_DCR_EEXT;
-}
-
-static __inline__ void disable_dma(unsigned int dmanr)
-{
-  volatile unsigned short *dmawp;
-  volatile unsigned char  *dmapb;
-
-#ifdef DMA_DEBUG
-  printk("disable_dma(dmanr=%d)\n", dmanr);
-#endif
-
-  dmawp = (unsigned short *) dma_base_addr[dmanr];
-  dmapb = (unsigned char *) dma_base_addr[dmanr];
-
-  /* Turn off external requests, and stop any DMA in progress */
-  dmawp[MCFDMA_DCR] &= ~MCFDMA_DCR_EEXT;
-  dmapb[MCFDMA_DSR] = MCFDMA_DSR_DONE;
-}
-
-/*
- * Clear the 'DMA Pointer Flip Flop'.
- * Write 0 for LSB/MSB, 1 for MSB/LSB access.
- * Use this once to initialize the FF to a known state.
- * After that, keep track of it. :-)
- * --- In order to do that, the DMA routines below should ---
- * --- only be used while interrupts are disabled! ---
- *
- * This is a NOP for ColdFire. Provide a stub for compatibility.
- */
-static __inline__ void clear_dma_ff(unsigned int dmanr)
-{
-}
-
-/* set mode (above) for a specific DMA channel */
-static __inline__ void set_dma_mode(unsigned int dmanr, char mode)
-{
-
-  volatile unsigned char  *dmabp;
-  volatile unsigned short *dmawp;
-
-#ifdef DMA_DEBUG
-  printk("set_dma_mode(dmanr=%d,mode=%d)\n", dmanr, mode);
-#endif
-
-  dmabp = (unsigned char *) dma_base_addr[dmanr];
-  dmawp = (unsigned short *) dma_base_addr[dmanr];
-
-  /* Clear config errors */
-  dmabp[MCFDMA_DSR] = MCFDMA_DSR_DONE;
-
-  /* Set command register */
-  dmawp[MCFDMA_DCR] =
-    MCFDMA_DCR_INT |         /* Enable completion irq */
-    MCFDMA_DCR_CS |          /* Force one xfer per request */
-    MCFDMA_DCR_AA |          /* Enable auto alignment */
-    /* single-address-mode */
-    ((mode & DMA_MODE_SINGLE_BIT) ? MCFDMA_DCR_SAA : 0) |
-    /* sets s_rw (-> r/w) high if Memory to I/0 */
-    ((mode & DMA_MODE_WRITE_BIT) ? MCFDMA_DCR_S_RW : 0) |
-    /* Memory to I/O or I/O to Memory */
-    ((mode & DMA_MODE_WRITE_BIT) ? MCFDMA_DCR_SINC : MCFDMA_DCR_DINC) |
-    /* 32 bit, 16 bit or 8 bit transfers */
-    ((mode & DMA_MODE_WORD_BIT)  ? MCFDMA_DCR_SSIZE_WORD :
-     ((mode & DMA_MODE_LONG_BIT) ? MCFDMA_DCR_SSIZE_LONG :
-                                   MCFDMA_DCR_SSIZE_BYTE)) |
-    ((mode & DMA_MODE_WORD_BIT)  ? MCFDMA_DCR_DSIZE_WORD :
-     ((mode & DMA_MODE_LONG_BIT) ? MCFDMA_DCR_DSIZE_LONG :
-                                   MCFDMA_DCR_DSIZE_BYTE));
-
-#ifdef DEBUG_DMA
-  printk("%s(%d): dmanr=%d DSR[%x]=%x DCR[%x]=%x\n", __FILE__, __LINE__,
-         dmanr, (int) &dmabp[MCFDMA_DSR], dmabp[MCFDMA_DSR],
-	 (int) &dmawp[MCFDMA_DCR], dmawp[MCFDMA_DCR]);
-#endif
-}
-
-/* Set transfer address for specific DMA channel */
-static __inline__ void set_dma_addr(unsigned int dmanr, unsigned int a)
-{
-  volatile unsigned short *dmawp;
-  volatile unsigned int   *dmalp;
-
-#ifdef DMA_DEBUG
-  printk("set_dma_addr(dmanr=%d,a=%x)\n", dmanr, a);
-#endif
-
-  dmawp = (unsigned short *) dma_base_addr[dmanr];
-  dmalp = (unsigned int *) dma_base_addr[dmanr];
-
-  /* Determine which address registers are used for memory/device accesses */
-  if (dmawp[MCFDMA_DCR] & MCFDMA_DCR_SINC) {
-    /* Source incrementing, must be memory */
-    dmalp[MCFDMA_SAR] = a;
-    /* Set dest address, must be device */
-    dmalp[MCFDMA_DAR] = dma_device_address[dmanr];
-  } else {
-    /* Destination incrementing, must be memory */
-    dmalp[MCFDMA_DAR] = a;
-    /* Set source address, must be device */
-    dmalp[MCFDMA_SAR] = dma_device_address[dmanr];
-  }
-
-#ifdef DEBUG_DMA
-  printk("%s(%d): dmanr=%d DCR[%x]=%x SAR[%x]=%08x DAR[%x]=%08x\n",
-	__FILE__, __LINE__, dmanr, (int) &dmawp[MCFDMA_DCR], dmawp[MCFDMA_DCR],
-	(int) &dmalp[MCFDMA_SAR], dmalp[MCFDMA_SAR],
-	(int) &dmalp[MCFDMA_DAR], dmalp[MCFDMA_DAR]);
-#endif
-}
-
-/*
- * Specific for Coldfire - sets device address.
- * Should be called after the mode set call, and before set DMA address.
- */
-static __inline__ void set_dma_device_addr(unsigned int dmanr, unsigned int a)
-{
-#ifdef DMA_DEBUG
-  printk("set_dma_device_addr(dmanr=%d,a=%x)\n", dmanr, a);
-#endif
-
-  dma_device_address[dmanr] = a;
-}
-
-/*
- * NOTE 2: "count" represents _bytes_.
- */
-static __inline__ void set_dma_count(unsigned int dmanr, unsigned int count)
-{
-  volatile unsigned short *dmawp;
-
-#ifdef DMA_DEBUG
-  printk("set_dma_count(dmanr=%d,count=%d)\n", dmanr, count);
-#endif
-
-  dmawp = (unsigned short *) dma_base_addr[dmanr];
-  dmawp[MCFDMA_BCR] = (unsigned short)count;
-}
-
-/*
- * Get DMA residue count. After a DMA transfer, this
- * should return zero. Reading this while a DMA transfer is
- * still in progress will return unpredictable results.
- * Otherwise, it returns the number of _bytes_ left to transfer.
- */
-static __inline__ int get_dma_residue(unsigned int dmanr)
-{
-  volatile unsigned short *dmawp;
-  unsigned short count;
-
-#ifdef DMA_DEBUG
-  printk("get_dma_residue(dmanr=%d)\n", dmanr);
-#endif
-
-  dmawp = (unsigned short *) dma_base_addr[dmanr];
-  count = dmawp[MCFDMA_BCR];
-  return((int) count);
-}
-#else /* CONFIG_M5272 is defined */
-
-/*
- * The MCF5272 DMA controller is very different than the controller defined above
- * in terms of register mapping.  For instance, with the exception of the 16-bit
- * interrupt register (IRQ#85, for reference), all of the registers are 32-bit.
- *
- * The big difference, however, is the lack of device-requested DMA.  All modes
- * are dual address transfer, and there is no 'device' setup or direction bit.
- * You can DMA between a device and memory, between memory and memory, or even between
- * two devices directly, with any combination of incrementing and non-incrementing
- * addresses you choose.  This puts a crimp in distinguishing between the 'device
- * address' set up by set_dma_device_addr.
- *
- * Therefore, there are two options.  One is to use set_dma_addr and set_dma_device_addr,
- * which will act exactly as above in -- it will look to see if the source is set to
- * autoincrement, and if so it will make the source use the set_dma_addr value and the
- * destination the set_dma_device_addr value.  Otherwise the source will be set to the
- * set_dma_device_addr value and the destination will get the set_dma_addr value.
- *
- * The other is to use the provided set_dma_src_addr and set_dma_dest_addr functions
- * and make it explicit.  Depending on what you're doing, one of these two should work
- * for you, but don't mix them in the same transfer setup.
- */
-
-/* enable/disable a specific DMA channel */
-static __inline__ void enable_dma(unsigned int dmanr)
-{
-  volatile unsigned int  *dmalp;
-
-#ifdef DMA_DEBUG
-  printk("enable_dma(dmanr=%d)\n", dmanr);
-#endif
-
-  dmalp = (unsigned int *) dma_base_addr[dmanr];
-  dmalp[MCFDMA_DMR] |= MCFDMA_DMR_EN;
-}
-
-static __inline__ void disable_dma(unsigned int dmanr)
-{
-  volatile unsigned int   *dmalp;
-
-#ifdef DMA_DEBUG
-  printk("disable_dma(dmanr=%d)\n", dmanr);
-#endif
-
-  dmalp = (unsigned int *) dma_base_addr[dmanr];
-
-  /* Turn off external requests, and stop any DMA in progress */
-  dmalp[MCFDMA_DMR] &= ~MCFDMA_DMR_EN;
-  dmalp[MCFDMA_DMR] |= MCFDMA_DMR_RESET;
-}
-
-/*
- * Clear the 'DMA Pointer Flip Flop'.
- * Write 0 for LSB/MSB, 1 for MSB/LSB access.
- * Use this once to initialize the FF to a known state.
- * After that, keep track of it. :-)
- * --- In order to do that, the DMA routines below should ---
- * --- only be used while interrupts are disabled! ---
- *
- * This is a NOP for ColdFire. Provide a stub for compatibility.
- */
-static __inline__ void clear_dma_ff(unsigned int dmanr)
-{
-}
-
-/* set mode (above) for a specific DMA channel */
-static __inline__ void set_dma_mode(unsigned int dmanr, char mode)
-{
-
-  volatile unsigned int   *dmalp;
-  volatile unsigned short *dmawp;
-
-#ifdef DMA_DEBUG
-  printk("set_dma_mode(dmanr=%d,mode=%d)\n", dmanr, mode);
-#endif
-  dmalp = (unsigned int *) dma_base_addr[dmanr];
-  dmawp = (unsigned short *) dma_base_addr[dmanr];
-
-  /* Clear config errors */
-  dmalp[MCFDMA_DMR] |= MCFDMA_DMR_RESET;
-
-  /* Set command register */
-  dmalp[MCFDMA_DMR] =
-    MCFDMA_DMR_RQM_DUAL |         /* Mandatory Request Mode setting */
-    MCFDMA_DMR_DSTT_SD  |         /* Set up addressing types; set to supervisor-data. */
-    MCFDMA_DMR_SRCT_SD  |         /* Set up addressing types; set to supervisor-data. */
-    /* source static-address-mode */
-    ((mode & DMA_MODE_SRC_SA_BIT) ? MCFDMA_DMR_SRCM_SA : MCFDMA_DMR_SRCM_IA) |
-    /* dest static-address-mode */
-    ((mode & DMA_MODE_DES_SA_BIT) ? MCFDMA_DMR_DSTM_SA : MCFDMA_DMR_DSTM_IA) |
-    /* burst, 32 bit, 16 bit or 8 bit transfers are separately configurable on the MCF5272 */
-    (((mode & DMA_MODE_SSIZE_MASK) >> DMA_MODE_SSIZE_OFF) << MCFDMA_DMR_DSTS_OFF) |
-    (((mode & DMA_MODE_SSIZE_MASK) >> DMA_MODE_SSIZE_OFF) << MCFDMA_DMR_SRCS_OFF);
-
-  dmawp[MCFDMA_DIR] |= MCFDMA_DIR_ASCEN;   /* Enable completion interrupts */
-
-#ifdef DEBUG_DMA
-  printk("%s(%d): dmanr=%d DMR[%x]=%x DIR[%x]=%x\n", __FILE__, __LINE__,
-	 dmanr, (int) &dmalp[MCFDMA_DMR], dmalp[MCFDMA_DMR],
-	 (int) &dmawp[MCFDMA_DIR], dmawp[MCFDMA_DIR]);
-#endif
-}
-
-/* Set transfer address for specific DMA channel */
-static __inline__ void set_dma_addr(unsigned int dmanr, unsigned int a)
-{
-  volatile unsigned int   *dmalp;
-
-#ifdef DMA_DEBUG
-  printk("set_dma_addr(dmanr=%d,a=%x)\n", dmanr, a);
-#endif
-
-  dmalp = (unsigned int *) dma_base_addr[dmanr];
-
-  /* Determine which address registers are used for memory/device accesses */
-  if (dmalp[MCFDMA_DMR] & MCFDMA_DMR_SRCM) {
-    /* Source incrementing, must be memory */
-    dmalp[MCFDMA_DSAR] = a;
-    /* Set dest address, must be device */
-    dmalp[MCFDMA_DDAR] = dma_device_address[dmanr];
-  } else {
-    /* Destination incrementing, must be memory */
-    dmalp[MCFDMA_DDAR] = a;
-    /* Set source address, must be device */
-    dmalp[MCFDMA_DSAR] = dma_device_address[dmanr];
-  }
-
-#ifdef DEBUG_DMA
-  printk("%s(%d): dmanr=%d DMR[%x]=%x SAR[%x]=%08x DAR[%x]=%08x\n",
-	__FILE__, __LINE__, dmanr, (int) &dmalp[MCFDMA_DMR], dmalp[MCFDMA_DMR],
-	(int) &dmalp[MCFDMA_DSAR], dmalp[MCFDMA_DSAR],
-	(int) &dmalp[MCFDMA_DDAR], dmalp[MCFDMA_DDAR]);
-#endif
-}
-
-/*
- * Specific for Coldfire - sets device address.
- * Should be called after the mode set call, and before set DMA address.
- */
-static __inline__ void set_dma_device_addr(unsigned int dmanr, unsigned int a)
-{
-#ifdef DMA_DEBUG
-  printk("set_dma_device_addr(dmanr=%d,a=%x)\n", dmanr, a);
-#endif
-
-  dma_device_address[dmanr] = a;
-}
-
-/*
- * NOTE 2: "count" represents _bytes_.
- *
- * NOTE 3: While a 32-bit register, "count" is only a maximum 24-bit value.
- */
-static __inline__ void set_dma_count(unsigned int dmanr, unsigned int count)
-{
-  volatile unsigned int *dmalp;
-
-#ifdef DMA_DEBUG
-  printk("set_dma_count(dmanr=%d,count=%d)\n", dmanr, count);
-#endif
-
-  dmalp = (unsigned int *) dma_base_addr[dmanr];
-  dmalp[MCFDMA_DBCR] = count;
-}
-
-/*
- * Get DMA residue count. After a DMA transfer, this
- * should return zero. Reading this while a DMA transfer is
- * still in progress will return unpredictable results.
- * Otherwise, it returns the number of _bytes_ left to transfer.
- */
-static __inline__ int get_dma_residue(unsigned int dmanr)
-{
-  volatile unsigned int *dmalp;
-  unsigned int count;
-
-#ifdef DMA_DEBUG
-  printk("get_dma_residue(dmanr=%d)\n", dmanr);
-#endif
-
-  dmalp = (unsigned int *) dma_base_addr[dmanr];
-  count = dmalp[MCFDMA_DBCR];
-  return(count);
-}
-
-#endif /* !defined(CONFIG_M5272) */
-#endif /* CONFIG_COLDFIRE */
-
 /* it's useless on the m68k, but unfortunately needed by the new
    bootmem allocator (but this should do it for this) */
 #define MAX_DMA_ADDRESS PAGE_OFFSET
 
-#define MAX_DMA_CHANNELS 8
-
-extern int request_dma(unsigned int dmanr, const char * device_id);	/* reserve a DMA channel */
-extern void free_dma(unsigned int dmanr);	/* release it again */
-
 #ifdef CONFIG_PCI
 extern int isa_dma_bridge_buggy;
 #else
diff --git a/arch/m68k/include/asm/elf.h b/arch/m68k/include/asm/elf.h
index 3d387ceaea3f..2def06a99b08 100644
--- a/arch/m68k/include/asm/elf.h
+++ b/arch/m68k/include/asm/elf.h
@@ -60,6 +60,13 @@ typedef struct user_m68kfp_struct elf_fpregset_t;
    is actually used on ASV.  */
 #define ELF_PLAT_INIT(_r, load_addr)	_r->a1 = 0
 
+#define ELF_FDPIC_PLAT_INIT(_r, _exec_map_addr, _interp_map_addr, dynamic_addr) \
+        do { \
+                (_r)->d3 = _exec_map_addr; \
+                (_r)->d4 = _interp_map_addr; \
+                (_r)->d5 = dynamic_addr; \
+        } while(0)
+
 #if defined(CONFIG_SUN3) || defined(CONFIG_COLDFIRE)
 #define ELF_EXEC_PAGESIZE	8192
 #else
@@ -114,4 +121,6 @@ typedef struct user_m68kfp_struct elf_fpregset_t;
 
 #define ELF_PLATFORM  (NULL)
 
+#define ELF_FDPIC_CORE_EFLAGS  0
+
 #endif
diff --git a/arch/m68k/include/asm/machdep.h b/arch/m68k/include/asm/machdep.h
index 8fd80ef1b77e..841ba6aa3fcb 100644
--- a/arch/m68k/include/asm/machdep.h
+++ b/arch/m68k/include/asm/machdep.h
@@ -19,7 +19,6 @@ extern void (*mach_get_model) (char *model);
 extern void (*mach_get_hardware_list) (struct seq_file *m);
 /* machine dependent timer functions */
 extern int (*mach_hwclk)(int, struct rtc_time*);
-extern unsigned int (*mach_get_ss)(void);
 extern int (*mach_get_rtc_pll)(struct rtc_pll_info *);
 extern int (*mach_set_rtc_pll)(struct rtc_pll_info *);
 extern void (*mach_reset)( void );
diff --git a/arch/m68k/include/asm/mmu.h b/arch/m68k/include/asm/mmu.h
index 5c15aacb1370..e00672425b00 100644
--- a/arch/m68k/include/asm/mmu.h
+++ b/arch/m68k/include/asm/mmu.h
@@ -6,9 +6,7 @@
 /* Default "unsigned long" context */
 typedef unsigned long mm_context_t;
 #else
-typedef struct {
-	unsigned long		end_brk;
-} mm_context_t;
+#include <asm-generic/mmu.h>
 #endif
 
 #endif
diff --git a/arch/m68k/include/asm/pgtable_no.h b/arch/m68k/include/asm/pgtable_no.h
index 87151d67d91e..bce5ca56c388 100644
--- a/arch/m68k/include/asm/pgtable_no.h
+++ b/arch/m68k/include/asm/pgtable_no.h
@@ -42,7 +42,8 @@ extern void paging_init(void);
  * ZERO_PAGE is a global shared page that is always zero: used
  * for zero-mapped memory areas etc..
  */
-#define ZERO_PAGE(vaddr)	(virt_to_page(0))
+extern void *empty_zero_page;
+#define ZERO_PAGE(vaddr)	(virt_to_page(empty_zero_page))
 
 /*
  * All 32bit addresses are effectively valid for vmalloc...
diff --git a/arch/m68k/include/uapi/asm/ptrace.h b/arch/m68k/include/uapi/asm/ptrace.h
index 19a1b9d0d858..5b50ea592e00 100644
--- a/arch/m68k/include/uapi/asm/ptrace.h
+++ b/arch/m68k/include/uapi/asm/ptrace.h
@@ -74,7 +74,12 @@ struct switch_stack {
 
 #define PTRACE_GET_THREAD_AREA    25
 
+#define PTRACE_GETFDPIC	31
+
 #define PTRACE_SINGLEBLOCK	33	/* resume execution until next branch */
 
+#define PTRACE_GETFDPIC_EXEC	0
+#define PTRACE_GETFDPIC_INTERP	1
+
 #endif /* __ASSEMBLY__ */
 #endif /* _UAPI_M68K_PTRACE_H */
diff --git a/arch/m68k/kernel/ptrace.c b/arch/m68k/kernel/ptrace.c
index daebccdd2c09..0a4184a37461 100644
--- a/arch/m68k/kernel/ptrace.c
+++ b/arch/m68k/kernel/ptrace.c
@@ -19,6 +19,8 @@
 #include <linux/ptrace.h>
 #include <linux/user.h>
 #include <linux/signal.h>
+#include <linux/regset.h>
+#include <linux/elf.h>
 
 #include <linux/uaccess.h>
 #include <asm/page.h>
@@ -284,3 +286,59 @@ asmlinkage void syscall_trace_leave(void)
 	if (test_thread_flag(TIF_SYSCALL_TRACE))
 		ptrace_report_syscall_exit(task_pt_regs(current), 0);
 }
+
+#if defined(CONFIG_BINFMT_ELF_FDPIC) && defined(CONFIG_ELF_CORE)
+/*
+ * Currently the only thing that needs to use regsets for m68k is the
+ * coredump support of the elf_fdpic loader. Implement the minimum
+ * definitions required for that.
+ */
+static int m68k_regset_get(struct task_struct *target,
+			   const struct user_regset *regset,
+			   struct membuf to)
+{
+	struct pt_regs *ptregs = task_pt_regs(target);
+	u32 uregs[ELF_NGREG];
+
+	ELF_CORE_COPY_REGS(uregs, ptregs);
+	return membuf_write(&to, uregs, sizeof(uregs));
+}
+
+enum m68k_regset {
+	REGSET_GPR,
+#ifdef CONFIG_FPU
+	REGSET_FPU,
+#endif
+};
+
+static const struct user_regset m68k_user_regsets[] = {
+	[REGSET_GPR] = {
+		.core_note_type = NT_PRSTATUS,
+		.n = ELF_NGREG,
+		.size = sizeof(u32),
+		.align = sizeof(u16),
+		.regset_get = m68k_regset_get,
+	},
+#ifdef CONFIG_FPU
+	[REGSET_FPU] = {
+		.core_note_type = NT_PRFPREG,
+		.n = sizeof(struct user_m68kfp_struct) / sizeof(u32),
+		.size = sizeof(u32),
+		.align = sizeof(u32),
+	}
+#endif /* CONFIG_FPU */
+};
+
+static const struct user_regset_view user_m68k_view = {
+	.name = "m68k",
+	.e_machine = EM_68K,
+	.ei_osabi = ELF_OSABI,
+	.regsets = m68k_user_regsets,
+	.n = ARRAY_SIZE(m68k_user_regsets)
+};
+
+const struct user_regset_view *task_user_regset_view(struct task_struct *task)
+{
+	return &user_m68k_view;
+}
+#endif /* CONFIG_BINFMT_ELF_FDPIC && CONFIG_ELF_CORE */
diff --git a/arch/m68k/kernel/setup_mm.c b/arch/m68k/kernel/setup_mm.c
index 78ab562beb31..656841defd2a 100644
--- a/arch/m68k/kernel/setup_mm.c
+++ b/arch/m68k/kernel/setup_mm.c
@@ -87,15 +87,6 @@ void (*mach_sched_init) (void) __initdata = NULL;
 void (*mach_init_IRQ) (void) __initdata = NULL;
 void (*mach_get_model) (char *model);
 void (*mach_get_hardware_list) (struct seq_file *m);
-/* machine dependent timer functions */
-int (*mach_hwclk) (int, struct rtc_time*);
-EXPORT_SYMBOL(mach_hwclk);
-unsigned int (*mach_get_ss)(void);
-int (*mach_get_rtc_pll)(struct rtc_pll_info *);
-int (*mach_set_rtc_pll)(struct rtc_pll_info *);
-EXPORT_SYMBOL(mach_get_ss);
-EXPORT_SYMBOL(mach_get_rtc_pll);
-EXPORT_SYMBOL(mach_set_rtc_pll);
 void (*mach_reset)( void );
 void (*mach_halt)( void );
 void (*mach_power_off)( void );
diff --git a/arch/m68k/kernel/setup_no.c b/arch/m68k/kernel/setup_no.c
index 5e4104f07a44..19eea73d3c17 100644
--- a/arch/m68k/kernel/setup_no.c
+++ b/arch/m68k/kernel/setup_no.c
@@ -50,7 +50,6 @@ char __initdata command_line[COMMAND_LINE_SIZE];
 
 /* machine dependent timer functions */
 void (*mach_sched_init)(void) __initdata = NULL;
-int (*mach_hwclk) (int, struct rtc_time*);
 
 /* machine dependent reboot functions */
 void (*mach_reset)(void);
diff --git a/arch/m68k/kernel/time.c b/arch/m68k/kernel/time.c
index 340ffeea0a9d..a97600b2af50 100644
--- a/arch/m68k/kernel/time.c
+++ b/arch/m68k/kernel/time.c
@@ -63,6 +63,15 @@ void timer_heartbeat(void)
 #endif /* CONFIG_HEARTBEAT */
 
 #ifdef CONFIG_M68KCLASSIC
+/* machine dependent timer functions */
+int (*mach_hwclk) (int, struct rtc_time*);
+EXPORT_SYMBOL(mach_hwclk);
+
+int (*mach_get_rtc_pll)(struct rtc_pll_info *);
+int (*mach_set_rtc_pll)(struct rtc_pll_info *);
+EXPORT_SYMBOL(mach_get_rtc_pll);
+EXPORT_SYMBOL(mach_set_rtc_pll);
+
 #if !IS_BUILTIN(CONFIG_RTC_DRV_GENERIC)
 void read_persistent_clock64(struct timespec64 *ts)
 {
diff --git a/arch/m68k/mm/motorola.c b/arch/m68k/mm/motorola.c
index ecbe948f4c1a..df7f797c908a 100644
--- a/arch/m68k/mm/motorola.c
+++ b/arch/m68k/mm/motorola.c
@@ -27,7 +27,6 @@
 #include <asm/pgalloc.h>
 #include <asm/machdep.h>
 #include <asm/io.h>
-#include <asm/dma.h>
 #ifdef CONFIG_ATARI
 #include <asm/atari_stram.h>
 #endif
diff --git a/arch/m68k/q40/config.c b/arch/m68k/q40/config.c
index 9237243077ce..c78ee709b458 100644
--- a/arch/m68k/q40/config.c
+++ b/arch/m68k/q40/config.c
@@ -41,7 +41,6 @@ static void q40_get_model(char *model);
 extern void q40_sched_init(void);
 
 static int q40_hwclk(int, struct rtc_time *);
-static unsigned int q40_get_ss(void);
 static int q40_get_rtc_pll(struct rtc_pll_info *pll);
 static int q40_set_rtc_pll(struct rtc_pll_info *pll);
 
@@ -169,7 +168,6 @@ void __init config_q40(void)
 
 	mach_init_IRQ = q40_init_IRQ;
 	mach_hwclk = q40_hwclk;
-	mach_get_ss = q40_get_ss;
 	mach_get_rtc_pll = q40_get_rtc_pll;
 	mach_set_rtc_pll = q40_set_rtc_pll;
 
@@ -246,11 +244,6 @@ static int q40_hwclk(int op, struct rtc_time *t)
 	return 0;
 }
 
-static unsigned int q40_get_ss(void)
-{
-	return bcd2bin(Q40_RTC_SECS);
-}
-
 /* get and set PLL calibration of RTC clock */
 #define Q40_RTC_PLL_MASK ((1<<5)-1)
 #define Q40_RTC_PLL_SIGN (1<<5)
diff --git a/drivers/mmc/host/Kconfig b/drivers/mmc/host/Kconfig
index af6c3c329076..d6144978e32d 100644
--- a/drivers/mmc/host/Kconfig
+++ b/drivers/mmc/host/Kconfig
@@ -508,7 +508,7 @@ config MMC_OMAP_HS
 
 config MMC_WBSD
 	tristate "Winbond W83L51xD SD/MMC Card Interface support"
-	depends on ISA_DMA_API && !M68K
+	depends on ISA_DMA_API
 	help
 	  This selects the Winbond(R) W83L51xD Secure digital and
 	  Multimedia card Interface.
diff --git a/fs/Kconfig.binfmt b/fs/Kconfig.binfmt
index 32dff7ba3dda..21e154516bf2 100644
--- a/fs/Kconfig.binfmt
+++ b/fs/Kconfig.binfmt
@@ -58,7 +58,7 @@ config ARCH_USE_GNU_PROPERTY
 config BINFMT_ELF_FDPIC
 	bool "Kernel support for FDPIC ELF binaries"
 	default y if !BINFMT_ELF
-	depends on (ARM || (SUPERH && !MMU))
+	depends on ARM || ((M68K || SUPERH) && !MMU)
 	select ELFCORE
 	help
 	  ELF FDPIC binaries are based on ELF, but allow the individual load
diff --git a/sound/core/Makefile b/sound/core/Makefile
index 350d704ced98..2762f03d9b7b 100644
--- a/sound/core/Makefile
+++ b/sound/core/Makefile
@@ -9,9 +9,7 @@ ifneq ($(CONFIG_SND_PROC_FS),)
 snd-y += info.o
 snd-$(CONFIG_SND_OSSEMUL) += info_oss.o
 endif
-ifneq ($(CONFIG_M68K),y)
 snd-$(CONFIG_ISA_DMA_API) += isadma.o
-endif
 snd-$(CONFIG_SND_OSSEMUL) += sound_oss.o
 snd-$(CONFIG_SND_VMASTER) += vmaster.o
 snd-$(CONFIG_SND_JACK)	  += ctljack.o jack.o
diff --git a/sound/isa/Kconfig b/sound/isa/Kconfig
index 570b88e0b201..6ffa48dd5983 100644
--- a/sound/isa/Kconfig
+++ b/sound/isa/Kconfig
@@ -22,7 +22,7 @@ config SND_SB16_DSP
 menuconfig SND_ISA
 	bool "ISA sound devices"
 	depends on ISA || COMPILE_TEST
-	depends on ISA_DMA_API && !M68K
+	depends on ISA_DMA_API
 	default y
 	help
 	  Support for sound devices connected via the ISA bus.