ARM: OMAP2+: Prepare to move GPMC to drivers by platform data header

We still need to support platform data for omap3 until it's booting
in device tree only mode. So let's add platform_data/omap-gpmc.h for
that, and a minimal linux/omap-gpmc.h for the save and restore used
by the PM code.

Let's also keep a minimal mach-omap2/gpmc.h still around to avoid
churn on the board-*.c files. Once omap3 boots in device tree only
mode, we can drop mach-omap2/gpmc.h and we can make the data
structures in platform_data/omap-gpmc.h private to the GPMC driver.

Note that we can now also remove gpmc-nand.h and gpmc-onenand.h.

Cc: Arnd Bergmann <arnd@arndb.de>
Acked-by: Roger Quadros <rogerq@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>

16 files changed, 271 insertions, 295 deletions

diff --git a/arch/arm/mach-omap2/board-am3517crane.c b/arch/arm/mach-omap2/board-am3517crane.c
index 212c3160de18..8168ddabaeda 100644
--- a/arch/arm/mach-omap2/board-am3517crane.c
+++ b/arch/arm/mach-omap2/board-am3517crane.c
@@ -24,6 +24,7 @@
 #include <linux/mtd/mtd.h>
 #include <linux/mtd/nand.h>
 #include <linux/mtd/partitions.h>
+#include <linux/omap-gpmc.h>
 
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
diff --git a/arch/arm/mach-omap2/board-cm-t35.c b/arch/arm/mach-omap2/board-cm-t35.c
index c6df8eec4553..91738a14ecbe 100644
--- a/arch/arm/mach-omap2/board-cm-t35.c
+++ b/arch/arm/mach-omap2/board-cm-t35.c
@@ -25,6 +25,7 @@
 #include <linux/input/matrix_keypad.h>
 #include <linux/delay.h>
 #include <linux/gpio.h>
+#include <linux/omap-gpmc.h>
 #include <linux/platform_data/gpio-omap.h>
 
 #include <linux/platform_data/at24.h>
@@ -51,8 +52,6 @@
 #include "sdram-micron-mt46h32m32lf-6.h"
 #include "hsmmc.h"
 #include "common-board-devices.h"
-#include "gpmc.h"
-#include "gpmc-nand.h"
 
 #define CM_T35_GPIO_PENDOWN		57
 #define SB_T35_USB_HUB_RESET_GPIO	167
diff --git a/arch/arm/mach-omap2/board-cm-t3517.c b/arch/arm/mach-omap2/board-cm-t3517.c
index 8a2c1677964c..794756df8529 100644
--- a/arch/arm/mach-omap2/board-cm-t3517.c
+++ b/arch/arm/mach-omap2/board-cm-t3517.c
@@ -28,6 +28,7 @@
 #include <linux/delay.h>
 #include <linux/gpio.h>
 #include <linux/leds.h>
+#include <linux/omap-gpmc.h>
 #include <linux/rtc-v3020.h>
 #include <linux/mtd/mtd.h>
 #include <linux/mtd/nand.h>
@@ -41,7 +42,6 @@
 
 #include "common.h"
 #include <linux/platform_data/mtd-nand-omap2.h>
-#include "gpmc.h"
 
 #include "am35xx.h"
 
@@ -50,7 +50,6 @@
 #include "hsmmc.h"
 #include "common-board-devices.h"
 #include "am35xx-emac.h"
-#include "gpmc-nand.h"
 
 #if defined(CONFIG_LEDS_GPIO) || defined(CONFIG_LEDS_GPIO_MODULE)
 static struct gpio_led cm_t3517_leds[] = {
diff --git a/arch/arm/mach-omap2/board-flash.c b/arch/arm/mach-omap2/board-flash.c
index 2d245c2e641c..70b21cc279ba 100644
--- a/arch/arm/mach-omap2/board-flash.c
+++ b/arch/arm/mach-omap2/board-flash.c
@@ -13,6 +13,7 @@
  */
 
 #include <linux/kernel.h>
+#include <linux/omap-gpmc.h>
 #include <linux/platform_device.h>
 #include <linux/mtd/physmap.h>
 #include <linux/io.h>
@@ -23,8 +24,6 @@
 #include "soc.h"
 #include "common.h"
 #include "board-flash.h"
-#include "gpmc-onenand.h"
-#include "gpmc-nand.h"
 
 #define REG_FPGA_REV			0x10
 #define REG_FPGA_DIP_SWITCH_INPUT2	0x60
diff --git a/arch/arm/mach-omap2/board-flash.h b/arch/arm/mach-omap2/board-flash.h
index 2fb5d41a9fae..ea9aaebe11e7 100644
--- a/arch/arm/mach-omap2/board-flash.h
+++ b/arch/arm/mach-omap2/board-flash.h
@@ -12,7 +12,6 @@
  */
 #include <linux/mtd/mtd.h>
 #include <linux/mtd/partitions.h>
-#include "gpmc.h"
 
 #define PDC_NOR		1
 #define PDC_NAND	2
diff --git a/arch/arm/mach-omap2/board-n8x0.c b/arch/arm/mach-omap2/board-n8x0.c
index 97767a27ca9d..49c3c25808e7 100644
--- a/arch/arm/mach-omap2/board-n8x0.c
+++ b/arch/arm/mach-omap2/board-n8x0.c
@@ -22,7 +22,6 @@
 #include <linux/spi/spi.h>
 #include <linux/usb/musb.h>
 #include <linux/platform_data/spi-omap2-mcspi.h>
-#include <linux/platform_data/mtd-onenand-omap2.h>
 #include <linux/mfd/menelaus.h>
 #include <sound/tlv320aic3x.h>
 
@@ -32,7 +31,6 @@
 #include "common.h"
 #include "mmc.h"
 #include "soc.h"
-#include "gpmc-onenand.h"
 #include "common-board-devices.h"
 
 #define TUSB6010_ASYNC_CS	1
diff --git a/arch/arm/mach-omap2/board-omap3pandora.c b/arch/arm/mach-omap2/board-omap3pandora.c
index f32201656cf3..7f1708738c30 100644
--- a/arch/arm/mach-omap2/board-omap3pandora.c
+++ b/arch/arm/mach-omap2/board-omap3pandora.c
@@ -24,6 +24,7 @@
 #include <linux/spi/spi.h>
 #include <linux/regulator/machine.h>
 #include <linux/i2c/twl.h>
+#include <linux/omap-gpmc.h>
 #include <linux/wl12xx.h>
 #include <linux/mtd/partitions.h>
 #include <linux/mtd/nand.h>
@@ -51,7 +52,6 @@
 #include "sdram-micron-mt46h32m32lf-6.h"
 #include "hsmmc.h"
 #include "common-board-devices.h"
-#include "gpmc-nand.h"
 
 #define PANDORA_WIFI_IRQ_GPIO		21
 #define PANDORA_WIFI_NRESET_GPIO	23
diff --git a/arch/arm/mach-omap2/board-rx51-peripherals.c b/arch/arm/mach-omap2/board-rx51-peripherals.c
index 30e7d4ce7b8d..e2ad48b5d9c0 100644
--- a/arch/arm/mach-omap2/board-rx51-peripherals.c
+++ b/arch/arm/mach-omap2/board-rx51-peripherals.c
@@ -23,6 +23,7 @@
 #include <linux/regulator/machine.h>
 #include <linux/gpio.h>
 #include <linux/gpio_keys.h>
+#include <linux/omap-gpmc.h>
 #include <linux/mmc/host.h>
 #include <linux/power/isp1704_charger.h>
 #include <linux/platform_data/spi-omap2-mcspi.h>
@@ -54,8 +55,6 @@
 #include "omap-pm.h"
 #include "hsmmc.h"
 #include "common-board-devices.h"
-#include "gpmc.h"
-#include "gpmc-onenand.h"
 #include "soc.h"
 #include "omap-secure.h"
 
diff --git a/arch/arm/mach-omap2/gpmc-nand.c b/arch/arm/mach-omap2/gpmc-nand.c
index cb7764314f17..d5951b17b736 100644
--- a/arch/arm/mach-omap2/gpmc-nand.c
+++ b/arch/arm/mach-omap2/gpmc-nand.c
@@ -12,14 +12,13 @@
 #include <linux/kernel.h>
 #include <linux/platform_device.h>
 #include <linux/io.h>
+#include <linux/omap-gpmc.h>
 #include <linux/mtd/nand.h>
 #include <linux/platform_data/mtd-nand-omap2.h>
 
 #include <asm/mach/flash.h>
 
-#include "gpmc.h"
 #include "soc.h"
-#include "gpmc-nand.h"
 
 /* minimum size for IO mapping */
 #define	NAND_IO_SIZE	4
diff --git a/arch/arm/mach-omap2/gpmc-nand.h b/arch/arm/mach-omap2/gpmc-nand.h
deleted file mode 100644
index d59e1281e851..000000000000
--- a/arch/arm/mach-omap2/gpmc-nand.h
+++ /dev/null
@@ -1,27 +0,0 @@
-/*
- *  arch/arm/mach-omap2/gpmc-nand.h
- *
- *  This program is free software; you can redistribute  it and/or modify it
- *  under  the terms of  the GNU General  Public License as published by the
- *  Free Software Foundation;  either version 2 of the  License, or (at your
- *  option) any later version.
- */
-
-#ifndef	__OMAP2_GPMC_NAND_H
-#define	__OMAP2_GPMC_NAND_H
-
-#include "gpmc.h"
-#include <linux/platform_data/mtd-nand-omap2.h>
-
-#if IS_ENABLED(CONFIG_MTD_NAND_OMAP2)
-extern int gpmc_nand_init(struct omap_nand_platform_data *d,
-			  struct gpmc_timings *gpmc_t);
-#else
-static inline int gpmc_nand_init(struct omap_nand_platform_data *d,
-				 struct gpmc_timings *gpmc_t)
-{
-	return 0;
-}
-#endif
-
-#endif
diff --git a/arch/arm/mach-omap2/gpmc-onenand.c b/arch/arm/mach-omap2/gpmc-onenand.c
index 8b6876c98ce1..53d197e0c1f3 100644
--- a/arch/arm/mach-omap2/gpmc-onenand.c
+++ b/arch/arm/mach-omap2/gpmc-onenand.c
@@ -15,14 +15,13 @@
 #include <linux/platform_device.h>
 #include <linux/mtd/onenand_regs.h>
 #include <linux/io.h>
+#include <linux/omap-gpmc.h>
 #include <linux/platform_data/mtd-onenand-omap2.h>
 #include <linux/err.h>
 
 #include <asm/mach/flash.h>
 
-#include "gpmc.h"
 #include "soc.h"
-#include "gpmc-onenand.h"
 
 #define	ONENAND_IO_SIZE	SZ_128K
 
diff --git a/arch/arm/mach-omap2/gpmc-onenand.h b/arch/arm/mach-omap2/gpmc-onenand.h
deleted file mode 100644
index 216f23a8b45c..000000000000
--- a/arch/arm/mach-omap2/gpmc-onenand.h
+++ /dev/null
@@ -1,24 +0,0 @@
-/*
- *  arch/arm/mach-omap2/gpmc-onenand.h
- *
- *  This program is free software; you can redistribute  it and/or modify it
- *  under  the terms of  the GNU General  Public License as published by the
- *  Free Software Foundation;  either version 2 of the  License, or (at your
- *  option) any later version.
- */
-
-#ifndef	__OMAP2_GPMC_ONENAND_H
-#define	__OMAP2_GPMC_ONENAND_H
-
-#include <linux/platform_data/mtd-onenand-omap2.h>
-
-#if IS_ENABLED(CONFIG_MTD_ONENAND_OMAP2)
-extern void gpmc_onenand_init(struct omap_onenand_platform_data *d);
-#else
-#define board_onenand_data	NULL
-static inline void gpmc_onenand_init(struct omap_onenand_platform_data *d)
-{
-}
-#endif
-
-#endif
diff --git a/arch/arm/mach-omap2/gpmc.c b/arch/arm/mach-omap2/gpmc.c
index 9ea92b6f180d..0753a046fed2 100644
--- a/arch/arm/mach-omap2/gpmc.c
+++ b/arch/arm/mach-omap2/gpmc.c
@@ -29,18 +29,17 @@
 #include <linux/of_address.h>
 #include <linux/of_mtd.h>
 #include <linux/of_device.h>
+#include <linux/omap-gpmc.h>
 #include <linux/mtd/nand.h>
 #include <linux/pm_runtime.h>
 
 #include <linux/platform_data/mtd-nand-omap2.h>
-
-#include <asm/mach-types.h>
+#include <linux/platform_data/mtd-onenand-omap2.h>
 
 #include "soc.h"
 #include "omap_device.h"
-#include "gpmc.h"
-#include "gpmc-nand.h"
-#include "gpmc-onenand.h"
+
+#include <asm/mach-types.h>
 
 #define	DEVICE_NAME		"omap-gpmc"
 
@@ -115,6 +114,60 @@
 
 #define GPMC_NR_WAITPINS		4
 
+#define GPMC_CS_CONFIG1		0x00
+#define GPMC_CS_CONFIG2		0x04
+#define GPMC_CS_CONFIG3		0x08
+#define GPMC_CS_CONFIG4		0x0c
+#define GPMC_CS_CONFIG5		0x10
+#define GPMC_CS_CONFIG6		0x14
+#define GPMC_CS_CONFIG7		0x18
+#define GPMC_CS_NAND_COMMAND	0x1c
+#define GPMC_CS_NAND_ADDRESS	0x20
+#define GPMC_CS_NAND_DATA	0x24
+
+/* Control Commands */
+#define GPMC_CONFIG_RDY_BSY	0x00000001
+#define GPMC_CONFIG_DEV_SIZE	0x00000002
+#define GPMC_CONFIG_DEV_TYPE	0x00000003
+#define GPMC_SET_IRQ_STATUS	0x00000004
+
+#define GPMC_CONFIG1_WRAPBURST_SUPP     (1 << 31)
+#define GPMC_CONFIG1_READMULTIPLE_SUPP  (1 << 30)
+#define GPMC_CONFIG1_READTYPE_ASYNC     (0 << 29)
+#define GPMC_CONFIG1_READTYPE_SYNC      (1 << 29)
+#define GPMC_CONFIG1_WRITEMULTIPLE_SUPP (1 << 28)
+#define GPMC_CONFIG1_WRITETYPE_ASYNC    (0 << 27)
+#define GPMC_CONFIG1_WRITETYPE_SYNC     (1 << 27)
+#define GPMC_CONFIG1_CLKACTIVATIONTIME(val) ((val & 3) << 25)
+#define GPMC_CONFIG1_PAGE_LEN(val)      ((val & 3) << 23)
+#define GPMC_CONFIG1_WAIT_READ_MON      (1 << 22)
+#define GPMC_CONFIG1_WAIT_WRITE_MON     (1 << 21)
+#define GPMC_CONFIG1_WAIT_MON_IIME(val) ((val & 3) << 18)
+#define GPMC_CONFIG1_WAIT_PIN_SEL(val)  ((val & 3) << 16)
+#define GPMC_CONFIG1_DEVICESIZE(val)    ((val & 3) << 12)
+#define GPMC_CONFIG1_DEVICESIZE_16      GPMC_CONFIG1_DEVICESIZE(1)
+#define GPMC_CONFIG1_DEVICETYPE(val)    ((val & 3) << 10)
+#define GPMC_CONFIG1_DEVICETYPE_NOR     GPMC_CONFIG1_DEVICETYPE(0)
+#define GPMC_CONFIG1_MUXTYPE(val)       ((val & 3) << 8)
+#define GPMC_CONFIG1_TIME_PARA_GRAN     (1 << 4)
+#define GPMC_CONFIG1_FCLK_DIV(val)      (val & 3)
+#define GPMC_CONFIG1_FCLK_DIV2          (GPMC_CONFIG1_FCLK_DIV(1))
+#define GPMC_CONFIG1_FCLK_DIV3          (GPMC_CONFIG1_FCLK_DIV(2))
+#define GPMC_CONFIG1_FCLK_DIV4          (GPMC_CONFIG1_FCLK_DIV(3))
+#define GPMC_CONFIG7_CSVALID		(1 << 6)
+
+#define GPMC_DEVICETYPE_NOR		0
+#define GPMC_DEVICETYPE_NAND		2
+#define GPMC_CONFIG_WRITEPROTECT	0x00000010
+#define WR_RD_PIN_MONITORING		0x00600000
+
+#define GPMC_ENABLE_IRQ		0x0000000d
+
+/* ECC commands */
+#define GPMC_ECC_READ		0 /* Reset Hardware ECC for read */
+#define GPMC_ECC_WRITE		1 /* Reset Hardware ECC for write */
+#define GPMC_ECC_READSYN	2 /* Reset before syndrom is read back */
+
 /* XXX: Only NAND irq has been considered,currently these are the only ones used
  */
 #define	GPMC_NR_IRQ		2
diff --git a/arch/arm/mach-omap2/gpmc.h b/arch/arm/mach-omap2/gpmc.h
index 707f6d58edd5..9caa41a6cb04 100644
--- a/arch/arm/mach-omap2/gpmc.h
+++ b/arch/arm/mach-omap2/gpmc.h
@@ -6,226 +6,9 @@
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License version 2 as
  * published by the Free Software Foundation.
+ *
+ * Do not include this file in any new code, this will get removed
+ * once omap3 boots in device tree only mode.
+ *
  */
-
-#ifndef __OMAP2_GPMC_H
-#define __OMAP2_GPMC_H
-
-#include <linux/platform_data/mtd-nand-omap2.h>
-
-/* Maximum Number of Chip Selects */
-#define GPMC_CS_NUM		8
-
-#define GPMC_CS_CONFIG1		0x00
-#define GPMC_CS_CONFIG2		0x04
-#define GPMC_CS_CONFIG3		0x08
-#define GPMC_CS_CONFIG4		0x0c
-#define GPMC_CS_CONFIG5		0x10
-#define GPMC_CS_CONFIG6		0x14
-#define GPMC_CS_CONFIG7		0x18
-#define GPMC_CS_NAND_COMMAND	0x1c
-#define GPMC_CS_NAND_ADDRESS	0x20
-#define GPMC_CS_NAND_DATA	0x24
-
-/* Control Commands */
-#define GPMC_CONFIG_RDY_BSY	0x00000001
-#define GPMC_CONFIG_DEV_SIZE	0x00000002
-#define GPMC_CONFIG_DEV_TYPE	0x00000003
-#define GPMC_SET_IRQ_STATUS	0x00000004
-#define GPMC_CONFIG_WP		0x00000005
-
-#define GPMC_ENABLE_IRQ		0x0000000d
-
-/* ECC commands */
-#define GPMC_ECC_READ		0 /* Reset Hardware ECC for read */
-#define GPMC_ECC_WRITE		1 /* Reset Hardware ECC for write */
-#define GPMC_ECC_READSYN	2 /* Reset before syndrom is read back */
-
-#define GPMC_CONFIG1_WRAPBURST_SUPP     (1 << 31)
-#define GPMC_CONFIG1_READMULTIPLE_SUPP  (1 << 30)
-#define GPMC_CONFIG1_READTYPE_ASYNC     (0 << 29)
-#define GPMC_CONFIG1_READTYPE_SYNC      (1 << 29)
-#define GPMC_CONFIG1_WRITEMULTIPLE_SUPP (1 << 28)
-#define GPMC_CONFIG1_WRITETYPE_ASYNC    (0 << 27)
-#define GPMC_CONFIG1_WRITETYPE_SYNC     (1 << 27)
-#define GPMC_CONFIG1_CLKACTIVATIONTIME(val) ((val & 3) << 25)
-#define GPMC_CONFIG1_PAGE_LEN(val)      ((val & 3) << 23)
-#define GPMC_CONFIG1_WAIT_READ_MON      (1 << 22)
-#define GPMC_CONFIG1_WAIT_WRITE_MON     (1 << 21)
-#define GPMC_CONFIG1_WAIT_MON_IIME(val) ((val & 3) << 18)
-#define GPMC_CONFIG1_WAIT_PIN_SEL(val)  ((val & 3) << 16)
-#define GPMC_CONFIG1_DEVICESIZE(val)    ((val & 3) << 12)
-#define GPMC_CONFIG1_DEVICESIZE_16      GPMC_CONFIG1_DEVICESIZE(1)
-#define GPMC_CONFIG1_DEVICETYPE(val)    ((val & 3) << 10)
-#define GPMC_CONFIG1_DEVICETYPE_NOR     GPMC_CONFIG1_DEVICETYPE(0)
-#define GPMC_CONFIG1_MUXTYPE(val)       ((val & 3) << 8)
-#define GPMC_CONFIG1_TIME_PARA_GRAN     (1 << 4)
-#define GPMC_CONFIG1_FCLK_DIV(val)      (val & 3)
-#define GPMC_CONFIG1_FCLK_DIV2          (GPMC_CONFIG1_FCLK_DIV(1))
-#define GPMC_CONFIG1_FCLK_DIV3          (GPMC_CONFIG1_FCLK_DIV(2))
-#define GPMC_CONFIG1_FCLK_DIV4          (GPMC_CONFIG1_FCLK_DIV(3))
-#define GPMC_CONFIG7_CSVALID		(1 << 6)
-
-#define GPMC_DEVICETYPE_NOR		0
-#define GPMC_DEVICETYPE_NAND		2
-#define GPMC_CONFIG_WRITEPROTECT	0x00000010
-#define WR_RD_PIN_MONITORING		0x00600000
-#define GPMC_IRQ_FIFOEVENTENABLE	0x01
-#define GPMC_IRQ_COUNT_EVENT		0x02
-
-#define GPMC_BURST_4			4	/* 4 word burst */
-#define GPMC_BURST_8			8	/* 8 word burst */
-#define GPMC_BURST_16			16	/* 16 word burst */
-#define GPMC_DEVWIDTH_8BIT		1	/* 8-bit device width */
-#define GPMC_DEVWIDTH_16BIT		2	/* 16-bit device width */
-#define GPMC_MUX_AAD			1	/* Addr-Addr-Data multiplex */
-#define GPMC_MUX_AD			2	/* Addr-Data multiplex */
-
-/* bool type time settings */
-struct gpmc_bool_timings {
-	bool cycle2cyclediffcsen;
-	bool cycle2cyclesamecsen;
-	bool we_extra_delay;
-	bool oe_extra_delay;
-	bool adv_extra_delay;
-	bool cs_extra_delay;
-	bool time_para_granularity;
-};
-
-/*
- * Note that all values in this struct are in nanoseconds except sync_clk
- * (which is in picoseconds), while the register values are in gpmc_fck cycles.
- */
-struct gpmc_timings {
-	/* Minimum clock period for synchronous mode (in picoseconds) */
-	u32 sync_clk;
-
-	/* Chip-select signal timings corresponding to GPMC_CS_CONFIG2 */
-	u32 cs_on;		/* Assertion time */
-	u32 cs_rd_off;		/* Read deassertion time */
-	u32 cs_wr_off;		/* Write deassertion time */
-
-	/* ADV signal timings corresponding to GPMC_CONFIG3 */
-	u32 adv_on;		/* Assertion time */
-	u32 adv_rd_off;		/* Read deassertion time */
-	u32 adv_wr_off;		/* Write deassertion time */
-
-	/* WE signals timings corresponding to GPMC_CONFIG4 */
-	u32 we_on;		/* WE assertion time */
-	u32 we_off;		/* WE deassertion time */
-
-	/* OE signals timings corresponding to GPMC_CONFIG4 */
-	u32 oe_on;		/* OE assertion time */
-	u32 oe_off;		/* OE deassertion time */
-
-	/* Access time and cycle time timings corresponding to GPMC_CONFIG5 */
-	u32 page_burst_access;	/* Multiple access word delay */
-	u32 access;		/* Start-cycle to first data valid delay */
-	u32 rd_cycle;		/* Total read cycle time */
-	u32 wr_cycle;		/* Total write cycle time */
-
-	u32 bus_turnaround;
-	u32 cycle2cycle_delay;
-
-	u32 wait_monitoring;
-	u32 clk_activation;
-
-	/* The following are only on OMAP3430 */
-	u32 wr_access;		/* WRACCESSTIME */
-	u32 wr_data_mux_bus;	/* WRDATAONADMUXBUS */
-
-	struct gpmc_bool_timings bool_timings;
-};
-
-/* Device timings in picoseconds */
-struct gpmc_device_timings {
-	u32 t_ceasu;	/* address setup to CS valid */
-	u32 t_avdasu;	/* address setup to ADV valid */
-	/* XXX: try to combine t_avdp_r & t_avdp_w. Issue is
-	 * of tusb using these timings even for sync whilst
-	 * ideally for adv_rd/(wr)_off it should have considered
-	 * t_avdh instead. This indirectly necessitates r/w
-	 * variations of t_avdp as it is possible to have one
-	 * sync & other async
-	 */
-	u32 t_avdp_r;	/* ADV low time (what about t_cer ?) */
-	u32 t_avdp_w;
-	u32 t_aavdh;	/* address hold time */
-	u32 t_oeasu;	/* address setup to OE valid */
-	u32 t_aa;	/* access time from ADV assertion */
-	u32 t_iaa;	/* initial access time */
-	u32 t_oe;	/* access time from OE assertion */
-	u32 t_ce;	/* access time from CS asertion */
-	u32 t_rd_cycle;	/* read cycle time */
-	u32 t_cez_r;	/* read CS deassertion to high Z */
-	u32 t_cez_w;	/* write CS deassertion to high Z */
-	u32 t_oez;	/* OE deassertion to high Z */
-	u32 t_weasu;	/* address setup to WE valid */
-	u32 t_wpl;	/* write assertion time */
-	u32 t_wph;	/* write deassertion time */
-	u32 t_wr_cycle;	/* write cycle time */
-
-	u32 clk;
-	u32 t_bacc;	/* burst access valid clock to output delay */
-	u32 t_ces;	/* CS setup time to clk */
-	u32 t_avds;	/* ADV setup time to clk */
-	u32 t_avdh;	/* ADV hold time from clk */
-	u32 t_ach;	/* address hold time from clk */
-	u32 t_rdyo;	/* clk to ready valid */
-
-	u32 t_ce_rdyz;	/* XXX: description ?, or use t_cez instead */
-	u32 t_ce_avd;	/* CS on to ADV on delay */
-
-	/* XXX: check the possibility of combining
-	 * cyc_aavhd_oe & cyc_aavdh_we
-	 */
-	u8 cyc_aavdh_oe;/* read address hold time in cycles */
-	u8 cyc_aavdh_we;/* write address hold time in cycles */
-	u8 cyc_oe;	/* access time from OE assertion in cycles */
-	u8 cyc_wpl;	/* write deassertion time in cycles */
-	u32 cyc_iaa;	/* initial access time in cycles */
-
-	/* extra delays */
-	bool ce_xdelay;
-	bool avd_xdelay;
-	bool oe_xdelay;
-	bool we_xdelay;
-};
-
-struct gpmc_settings {
-	bool burst_wrap;	/* enables wrap bursting */
-	bool burst_read;	/* enables read page/burst mode */
-	bool burst_write;	/* enables write page/burst mode */
-	bool device_nand;	/* device is NAND */
-	bool sync_read;		/* enables synchronous reads */
-	bool sync_write;	/* enables synchronous writes */
-	bool wait_on_read;	/* monitor wait on reads */
-	bool wait_on_write;	/* monitor wait on writes */
-	u32 burst_len;		/* page/burst length */
-	u32 device_width;	/* device bus width (8 or 16 bit) */
-	u32 mux_add_data;	/* multiplex address & data */
-	u32 wait_pin;		/* wait-pin to be used */
-};
-
-extern int gpmc_calc_timings(struct gpmc_timings *gpmc_t,
-			     struct gpmc_settings *gpmc_s,
-			     struct gpmc_device_timings *dev_t);
-
-extern void gpmc_update_nand_reg(struct gpmc_nand_regs *reg, int cs);
-extern int gpmc_get_client_irq(unsigned irq_config);
-
-extern unsigned int gpmc_ticks_to_ns(unsigned int ticks);
-
-extern void gpmc_cs_write_reg(int cs, int idx, u32 val);
-extern int gpmc_calc_divider(unsigned int sync_clk);
-extern int gpmc_cs_set_timings(int cs, const struct gpmc_timings *t);
-extern int gpmc_cs_program_settings(int cs, struct gpmc_settings *p);
-extern int gpmc_cs_request(int cs, unsigned long size, unsigned long *base);
-extern void gpmc_cs_free(int cs);
-extern void omap3_gpmc_save_context(void);
-extern void omap3_gpmc_restore_context(void);
-extern int gpmc_configure(int cmd, int wval);
-extern void gpmc_read_settings_dt(struct device_node *np,
-				  struct gpmc_settings *p);
-
-#endif
+#include <linux/omap-gpmc.h>
diff --git a/arch/arm/mach-omap2/pm34xx.c b/arch/arm/mach-omap2/pm34xx.c
index 175564c88a30..88721df6001d 100644
--- a/arch/arm/mach-omap2/pm34xx.c
+++ b/arch/arm/mach-omap2/pm34xx.c
@@ -29,6 +29,7 @@
 #include <linux/delay.h>
 #include <linux/slab.h>
 #include <linux/omap-dma.h>
+#include <linux/omap-gpmc.h>
 #include <linux/platform_data/gpio-omap.h>
 
 #include <trace/events/power.h>
@@ -43,7 +44,6 @@
 #include "common.h"
 #include "cm3xxx.h"
 #include "cm-regbits-34xx.h"
-#include "gpmc.h"
 #include "prm-regbits-34xx.h"
 #include "prm3xxx.h"
 #include "pm.h"
diff --git a/include/linux/omap-gpmc.h b/include/linux/omap-gpmc.h
new file mode 100644
index 000000000000..c2080eebbb47
--- /dev/null
+++ b/include/linux/omap-gpmc.h
@@ -0,0 +1,199 @@
+/*
+ *  OMAP GPMC (General Purpose Memory Controller) defines
+ *
+ *  This program is free software; you can redistribute  it and/or modify it
+ *  under  the terms of  the GNU General  Public License as published by the
+ *  Free Software Foundation;  either version 2 of the  License, or (at your
+ *  option) any later version.
+ */
+
+/* Maximum Number of Chip Selects */
+#define GPMC_CS_NUM		8
+
+#define GPMC_CONFIG_WP		0x00000005
+
+#define GPMC_IRQ_FIFOEVENTENABLE	0x01
+#define GPMC_IRQ_COUNT_EVENT		0x02
+
+#define GPMC_BURST_4			4	/* 4 word burst */
+#define GPMC_BURST_8			8	/* 8 word burst */
+#define GPMC_BURST_16			16	/* 16 word burst */
+#define GPMC_DEVWIDTH_8BIT		1	/* 8-bit device width */
+#define GPMC_DEVWIDTH_16BIT		2	/* 16-bit device width */
+#define GPMC_MUX_AAD			1	/* Addr-Addr-Data multiplex */
+#define GPMC_MUX_AD			2	/* Addr-Data multiplex */
+
+/* bool type time settings */
+struct gpmc_bool_timings {
+	bool cycle2cyclediffcsen;
+	bool cycle2cyclesamecsen;
+	bool we_extra_delay;
+	bool oe_extra_delay;
+	bool adv_extra_delay;
+	bool cs_extra_delay;
+	bool time_para_granularity;
+};
+
+/*
+ * Note that all values in this struct are in nanoseconds except sync_clk
+ * (which is in picoseconds), while the register values are in gpmc_fck cycles.
+ */
+struct gpmc_timings {
+	/* Minimum clock period for synchronous mode (in picoseconds) */
+	u32 sync_clk;
+
+	/* Chip-select signal timings corresponding to GPMC_CS_CONFIG2 */
+	u32 cs_on;		/* Assertion time */
+	u32 cs_rd_off;		/* Read deassertion time */
+	u32 cs_wr_off;		/* Write deassertion time */
+
+	/* ADV signal timings corresponding to GPMC_CONFIG3 */
+	u32 adv_on;		/* Assertion time */
+	u32 adv_rd_off;		/* Read deassertion time */
+	u32 adv_wr_off;		/* Write deassertion time */
+
+	/* WE signals timings corresponding to GPMC_CONFIG4 */
+	u32 we_on;		/* WE assertion time */
+	u32 we_off;		/* WE deassertion time */
+
+	/* OE signals timings corresponding to GPMC_CONFIG4 */
+	u32 oe_on;		/* OE assertion time */
+	u32 oe_off;		/* OE deassertion time */
+
+	/* Access time and cycle time timings corresponding to GPMC_CONFIG5 */
+	u32 page_burst_access;	/* Multiple access word delay */
+	u32 access;		/* Start-cycle to first data valid delay */
+	u32 rd_cycle;		/* Total read cycle time */
+	u32 wr_cycle;		/* Total write cycle time */
+
+	u32 bus_turnaround;
+	u32 cycle2cycle_delay;
+
+	u32 wait_monitoring;
+	u32 clk_activation;
+
+	/* The following are only on OMAP3430 */
+	u32 wr_access;		/* WRACCESSTIME */
+	u32 wr_data_mux_bus;	/* WRDATAONADMUXBUS */
+
+	struct gpmc_bool_timings bool_timings;
+};
+
+/* Device timings in picoseconds */
+struct gpmc_device_timings {
+	u32 t_ceasu;	/* address setup to CS valid */
+	u32 t_avdasu;	/* address setup to ADV valid */
+	/* XXX: try to combine t_avdp_r & t_avdp_w. Issue is
+	 * of tusb using these timings even for sync whilst
+	 * ideally for adv_rd/(wr)_off it should have considered
+	 * t_avdh instead. This indirectly necessitates r/w
+	 * variations of t_avdp as it is possible to have one
+	 * sync & other async
+	 */
+	u32 t_avdp_r;	/* ADV low time (what about t_cer ?) */
+	u32 t_avdp_w;
+	u32 t_aavdh;	/* address hold time */
+	u32 t_oeasu;	/* address setup to OE valid */
+	u32 t_aa;	/* access time from ADV assertion */
+	u32 t_iaa;	/* initial access time */
+	u32 t_oe;	/* access time from OE assertion */
+	u32 t_ce;	/* access time from CS asertion */
+	u32 t_rd_cycle;	/* read cycle time */
+	u32 t_cez_r;	/* read CS deassertion to high Z */
+	u32 t_cez_w;	/* write CS deassertion to high Z */
+	u32 t_oez;	/* OE deassertion to high Z */
+	u32 t_weasu;	/* address setup to WE valid */
+	u32 t_wpl;	/* write assertion time */
+	u32 t_wph;	/* write deassertion time */
+	u32 t_wr_cycle;	/* write cycle time */
+
+	u32 clk;
+	u32 t_bacc;	/* burst access valid clock to output delay */
+	u32 t_ces;	/* CS setup time to clk */
+	u32 t_avds;	/* ADV setup time to clk */
+	u32 t_avdh;	/* ADV hold time from clk */
+	u32 t_ach;	/* address hold time from clk */
+	u32 t_rdyo;	/* clk to ready valid */
+
+	u32 t_ce_rdyz;	/* XXX: description ?, or use t_cez instead */
+	u32 t_ce_avd;	/* CS on to ADV on delay */
+
+	/* XXX: check the possibility of combining
+	 * cyc_aavhd_oe & cyc_aavdh_we
+	 */
+	u8 cyc_aavdh_oe;/* read address hold time in cycles */
+	u8 cyc_aavdh_we;/* write address hold time in cycles */
+	u8 cyc_oe;	/* access time from OE assertion in cycles */
+	u8 cyc_wpl;	/* write deassertion time in cycles */
+	u32 cyc_iaa;	/* initial access time in cycles */
+
+	/* extra delays */
+	bool ce_xdelay;
+	bool avd_xdelay;
+	bool oe_xdelay;
+	bool we_xdelay;
+};
+
+struct gpmc_settings {
+	bool burst_wrap;	/* enables wrap bursting */
+	bool burst_read;	/* enables read page/burst mode */
+	bool burst_write;	/* enables write page/burst mode */
+	bool device_nand;	/* device is NAND */
+	bool sync_read;		/* enables synchronous reads */
+	bool sync_write;	/* enables synchronous writes */
+	bool wait_on_read;	/* monitor wait on reads */
+	bool wait_on_write;	/* monitor wait on writes */
+	u32 burst_len;		/* page/burst length */
+	u32 device_width;	/* device bus width (8 or 16 bit) */
+	u32 mux_add_data;	/* multiplex address & data */
+	u32 wait_pin;		/* wait-pin to be used */
+};
+
+extern int gpmc_calc_timings(struct gpmc_timings *gpmc_t,
+			     struct gpmc_settings *gpmc_s,
+			     struct gpmc_device_timings *dev_t);
+
+struct gpmc_nand_regs;
+struct device_node;
+
+extern void gpmc_update_nand_reg(struct gpmc_nand_regs *reg, int cs);
+extern int gpmc_get_client_irq(unsigned irq_config);
+
+extern unsigned int gpmc_ticks_to_ns(unsigned int ticks);
+
+extern void gpmc_cs_write_reg(int cs, int idx, u32 val);
+extern int gpmc_calc_divider(unsigned int sync_clk);
+extern int gpmc_cs_set_timings(int cs, const struct gpmc_timings *t);
+extern int gpmc_cs_program_settings(int cs, struct gpmc_settings *p);
+extern int gpmc_cs_request(int cs, unsigned long size, unsigned long *base);
+extern void gpmc_cs_free(int cs);
+extern int gpmc_configure(int cmd, int wval);
+extern void gpmc_read_settings_dt(struct device_node *np,
+				  struct gpmc_settings *p);
+
+extern void omap3_gpmc_save_context(void);
+extern void omap3_gpmc_restore_context(void);
+
+struct gpmc_timings;
+struct omap_nand_platform_data;
+struct omap_onenand_platform_data;
+
+#if IS_ENABLED(CONFIG_MTD_NAND_OMAP2)
+extern int gpmc_nand_init(struct omap_nand_platform_data *d,
+			  struct gpmc_timings *gpmc_t);
+#else
+static inline int gpmc_nand_init(struct omap_nand_platform_data *d,
+				 struct gpmc_timings *gpmc_t)
+{
+	return 0;
+}
+#endif
+
+#if IS_ENABLED(CONFIG_MTD_ONENAND_OMAP2)
+extern void gpmc_onenand_init(struct omap_onenand_platform_data *d);
+#else
+#define board_onenand_data	NULL
+static inline void gpmc_onenand_init(struct omap_onenand_platform_data *d)
+{
+}
+#endif