diff options
| author | Linus Torvalds <torvalds@linux-foundation.org> | 2022-05-26 20:28:12 +0300 |
|---|---|---|
| committer | Linus Torvalds <torvalds@linux-foundation.org> | 2022-05-26 20:28:12 +0300 |
| commit | ae862183285cbb2ef9032770d98ffa9becffe9d5 (patch) | |
| tree | fcceed35ddadcab9100abcf830c09949cddab3c8 | |
| parent | c011dd537ffe47462051930413fed07dbdc80313 (diff) | |
| parent | 82706d6fb19d0b845146f7108fce3926502c5f52 (diff) | |
| download | linux-ae862183285cbb2ef9032770d98ffa9becffe9d5.tar.xz | |
Merge tag 'arm-dt-5.19' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull ARM DT updates from Arnd Bergmann:
"There are 40 branches this time, adding a lot of new hardware support,
and cleanups. Krzysztof Kozlowski continues his treewide cleanups.
There are a number of new SoCs, all of them as part of existing
families, and typically added along with a reference board:
- Renesas RZ/G2UL (R9A07G043) is the single-core version of the
RZ/G2L general-purpose MPU.
- Renesas RZ/V2M (R9A09G011) is a smart camera SoC
- Renesas R-Car V4H (R8A779G0) is an automotive chip with Cortex-A76
cores and deep learning accerlation.
- Broadcom BCM47622 is a new broadband SoC based on a quad Cortex-A7
and dual Wifi-6.
- Corstone1000 is a generic platform from Arm that is used for
designing custom SoCs, the support for now is for the Fixed Virtual
Platform emulation for it.
- Mediatek MT8195 (Kompanio 1200) is a high-end consumer chip used in
upcoming Chromebooks.
- NXP i.MXRT1050 is a Cortex-M7 based microcontroller, the first
MMU-less SoC to be added in a while
New machines based on already supported SoCs this time are mainly for
32-bit platforms and include:
- Two wireless routers based on Broadcom bcm4708
- 30 new boards based on NXP i.MX6, i.MX7 and i.MX8 families, mostly
for the industrial embedded market, and on NXP LS1021A based IOT
board.
- Two ethernet switches based on Microchip LAN966
- Eight Qualcomm Snapdragon based machines, including a smartwatch, a
Chromebook board and some phones
- Another phone based on the old ST-Ericsson Ux500 platform
- Seven STM32MP1 based boards
- Four single-board computers based on Rockchip RK3566/RK3568"
* tag 'arm-dt-5.19' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (791 commits)
ARM: dts: kswitch-d10: enable networking
ARM: dts: lan966x: add switch node
ARM: dts: lan966x: add serdes node
ARM: dts: lan966x: add reset switch reset node
ARM: dts: lan966x: add MIIM nodes
ARM: dts: lan966x: add hwmon node
ARM: dts: lan966x: add basic Kontron KSwitch D10 support
ARM: dts: lan966x: add flexcom I2C nodes
ARM: dts: lan966x: add flexcom SPI nodes
ARM: dts: lan966x: add all flexcom usart nodes
ARM: dts: lan966x: add missing uart DMA channel
ARM: dts: lan966x: add sgpio node
ARM: dts: lan966x: swap dma channels for crypto node
ARM: dts: lan966x: rename pinctrl nodes
ARM: dts: at91: sama7g5: remove interrupt-parent from gic node
ARM: dts: at91: use generic node name for dataflash
ARM: dts: turris-omnia: Add atsha204a node
arm64: dts: mt8192: Follow binding order for SCP registers
arm64: dts: mediatek: add mtk-snfi for mt7622
arm64: dts: mediatek: mt8195-demo: enable uart1
...
710 files changed, 43161 insertions, 11430 deletions
diff --git a/Documentation/devicetree/bindings/arm/arm,corstone1000.yaml b/Documentation/devicetree/bindings/arm/arm,corstone1000.yaml new file mode 100644 index 000000000000..a77f88223801 --- /dev/null +++ b/Documentation/devicetree/bindings/arm/arm,corstone1000.yaml @@ -0,0 +1,45 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/arm/arm,corstone1000.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: ARM Corstone1000 Device Tree Bindings + +maintainers: + - Vishnu Banavath <vishnu.banavath@arm.com> + - Rui Miguel Silva <rui.silva@linaro.org> + +description: |+ + ARM's Corstone1000 includes pre-verified Corstone SSE-710 subsystem that + provides a flexible compute architecture that combines Cortex‑A and Cortex‑M + processors. + + Support for Cortex‑A32, Cortex‑A35 and Cortex‑A53 processors. Two expansion + systems for M-Class (or other) processors for adding sensors, connectivity, + video, audio and machine learning at the edge System and security IPs to build + a secure SoC for a range of rich IoT applications, for example gateways, smart + cameras and embedded systems. + + Integrated Secure Enclave providing hardware Root of Trust and supporting + seamless integration of the optional CryptoCellâ„¢-312 cryptographic + accelerator. + +properties: + $nodename: + const: '/' + compatible: + oneOf: + - description: Corstone1000 MPS3 it has 1 Cortex-A35 CPU core in a FPGA + implementation of the Corstone1000 in the MPS3 prototyping board. See + ARM document DAI0550. + items: + - const: arm,corstone1000-mps3 + - description: Corstone1000 FVP is the Fixed Virtual Platform + implementation of this system. See ARM ecosystems FVP's. + items: + - const: arm,corstone1000-fvp + +additionalProperties: true + +... diff --git a/Documentation/devicetree/bindings/arm/bcm/brcm,bcm4708.yaml b/Documentation/devicetree/bindings/arm/bcm/brcm,bcm4708.yaml index 434d3c6db61e..8b7e87fb6c34 100644 --- a/Documentation/devicetree/bindings/arm/bcm/brcm,bcm4708.yaml +++ b/Documentation/devicetree/bindings/arm/bcm/brcm,bcm4708.yaml @@ -64,6 +64,7 @@ properties: - description: BCM47094 based boards items: - enum: + - asus,rt-ac88u - dlink,dir-885l - linksys,panamera - luxul,abr-4500-v1 @@ -83,9 +84,14 @@ properties: - brcm,bcm953012er - brcm,bcm953012hr - brcm,bcm953012k + - const: brcm,bcm53012 + - const: brcm,bcm4708 + + - description: BCM53016 based boards + items: + - enum: - meraki,mr32 - - const: brcm,brcm53012 - - const: brcm,brcm53016 + - const: brcm,bcm53016 - const: brcm,bcm4708 additionalProperties: true diff --git a/Documentation/devicetree/bindings/arm/bcm/brcm,bcmbca.yaml b/Documentation/devicetree/bindings/arm/bcm/brcm,bcmbca.yaml new file mode 100644 index 000000000000..5fb455840417 --- /dev/null +++ b/Documentation/devicetree/bindings/arm/bcm/brcm,bcmbca.yaml @@ -0,0 +1,33 @@ +# SPDX-License-Identifier: GPL-2.0 OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/arm/bcm/brcm,bcmbca.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Broadcom Broadband SoC device tree bindings + +description: + Broadcom Broadband SoCs include family of high performance DSL/PON/Wireless + chips that can be used as home gateway, router and WLAN AP for residential, + enterprise and carrier applications. + +maintainers: + - William Zhang <william.zhang@broadcom.com> + - Anand Gore <anand.gore@broadcom.com> + - Kursad Oney <kursad.oney@broadcom.com> + +properties: + $nodename: + const: '/' + compatible: + oneOf: + - description: BCM47622 based boards + items: + - enum: + - brcm,bcm947622 + - const: brcm,bcm47622 + - const: brcm,bcmbca + +additionalProperties: true + +... diff --git a/Documentation/devicetree/bindings/arm/fsl.yaml b/Documentation/devicetree/bindings/arm/fsl.yaml index 08bdd30e511c..ef524378d449 100644 --- a/Documentation/devicetree/bindings/arm/fsl.yaml +++ b/Documentation/devicetree/bindings/arm/fsl.yaml @@ -172,7 +172,7 @@ properties: - karo,tx53 # Ka-Ro electronics TX53 module - kiebackpeter,imx53-ddc # K+P imx53 DDC - kiebackpeter,imx53-hsc # K+P imx53 HSC - - menlo,m53menlo + - menlo,m53menlo # i.MX53 Menlo board - voipac,imx53-dmm-668 # Voipac i.MX53 X53-DMM-668 - const: fsl,imx53 @@ -192,6 +192,7 @@ properties: items: - enum: - auvidea,h100 # Auvidea H100 + - bosch,imx6q-acc # Bosch ACC i.MX6 Dual - boundary,imx6q-nitrogen6_max - boundary,imx6q-nitrogen6_som2 - boundary,imx6q-nitrogen6x @@ -411,7 +412,6 @@ properties: - technologic,imx6dl-ts4900 - technologic,imx6dl-ts7970 - toradex,colibri_imx6dl # Colibri iMX6 Modules - - toradex,colibri_imx6dl-v1_1 # Colibri iMX6 V1.1 Modules - udoo,imx6dl-udoo # Udoo i.MX6 Dual-lite Board - vdl,lanmcu # Van der Laan LANMCU board - wand,imx6dl-wandboard # Wandboard i.MX6 Dual Lite Board @@ -488,17 +488,13 @@ properties: - description: i.MX6DL Boards with Toradex Colibri iMX6DL/S Modules items: - enum: + - toradex,colibri_imx6dl-aster # Colibri iMX6DL/S Module on Aster Board - toradex,colibri_imx6dl-eval-v3 # Colibri iMX6DL/S Module on Colibri Evaluation Board V3 + - toradex,colibri_imx6dl-iris # Colibri iMX6DL/S Module on Iris Board + - toradex,colibri_imx6dl-iris-v2 # Colibri iMX6DL/S Module on Iris Board V2 - const: toradex,colibri_imx6dl # Colibri iMX6DL/S Module - const: fsl,imx6dl - - description: i.MX6DL Boards with Toradex Colibri iMX6DL/S V1.1 Modules - items: - - enum: - - toradex,colibri_imx6dl-v1_1-eval-v3 # Colibri iMX6DL/S V1.1 M. on Colibri Evaluation Board V3 - - const: toradex,colibri_imx6dl-v1_1 # Colibri iMX6DL/S V1.1 Module - - const: fsl,imx6dl - - description: i.MX6S DHCOM DRC02 Board items: - const: dh,imx6s-dhcom-drc02 @@ -613,6 +609,28 @@ properties: - const: kontron,imx6ul-n6310-som - const: fsl,imx6ul + - description: TQ-Systems TQMa6UL1 SoM on MBa6ULx board + items: + - enum: + - tq,imx6ul-tqma6ul1-mba6ulx + - const: tq,imx6ul-tqma6ul1 # MCIMX6G1 + - const: fsl,imx6ul + + - description: TQ-Systems TQMa6UL2 SoM on MBa6ULx board + items: + - enum: + - tq,imx6ul-tqma6ul2-mba6ulx + - const: tq,imx6ul-tqma6ul2 # MCIMX6G2 + - const: fsl,imx6ul + + - description: TQ-Systems TQMa6ULxL SoM on MBa6ULx[L] board + items: + - enum: + - tq,imx6ul-tqma6ul2l-mba6ulx # using LGA adapter + - tq,imx6ul-tqma6ul2l-mba6ulxl + - const: tq,imx6ul-tqma6ul2l # MCIMX6G2, LGA SoM variant + - const: fsl,imx6ul + - description: i.MX6ULL based Boards items: - enum: @@ -640,26 +658,44 @@ properties: - const: phytec,imx6ull-pcl063 # PHYTEC phyCORE-i.MX 6ULL - const: fsl,imx6ull + - description: i.MX6ULL PHYTEC phyGATE-Tauri + items: + - enum: + - phytec,imx6ull-phygate-tauri-emmc + - phytec,imx6ull-phygate-tauri-nand + - const: phytec,imx6ull-phygate-tauri # PHYTEC phyGATE-Tauri with i.MX6 ULL + - const: phytec,imx6ull-pcl063 # PHYTEC phyCORE-i.MX 6ULL + - const: fsl,imx6ull + - description: i.MX6ULL Boards with Toradex Colibri iMX6ULL Modules items: - enum: - - toradex,colibri-imx6ull-eval # Colibri iMX6ULL Module on Colibri Evaluation Board + - toradex,colibri-imx6ull-aster # Colibri iMX6ULL Module on Aster Carrier Board + - toradex,colibri-imx6ull-eval # Colibri iMX6ULL Module on Colibri Evaluation Board V3 + - toradex,colibri-imx6ull-iris # Colibri iMX6ULL Module on Iris Carrier Board + - toradex,colibri-imx6ull-iris-v2 # Colibri iMX6ULL Module on Iris V2 Carrier Board - const: toradex,colibri-imx6ull # Colibri iMX6ULL Module - - const: fsl,imx6dl + - const: fsl,imx6ull - description: i.MX6ULL Boards with Toradex Colibri iMX6ULL 1GB (eMMC) Module items: - enum: - - toradex,colibri-imx6ull-emmc-eval # Colibri iMX6ULL 1GB (eMMC) M. on Colibri Evaluation Board - - const: toradex,colibri-imx6ull-emmc # Colibri iMX6ULL 1GB (eMMC) Module - - const: fsl,imx6dl + - toradex,colibri-imx6ull-emmc-aster # Colibri iMX6ULL 1G (eMMC) on Aster Carrier Board + - toradex,colibri-imx6ull-emmc-eval # Colibri iMX6ULL 1G (eMMC) on Colibri Evaluation B. V3 + - toradex,colibri-imx6ull-emmc-iris # Colibri iMX6ULL 1G (eMMC) on Iris Carrier Board + - toradex,colibri-imx6ull-emmc-iris-v2 # Colibri iMX6ULL 1G (eMMC) on Iris V2 Carrier Board + - const: toradex,colibri-imx6ull-emmc # Colibri iMX6ULL 1GB (eMMC) Module + - const: fsl,imx6ull - description: i.MX6ULL Boards with Toradex Colibri iMX6ULL Wi-Fi / BT Modules items: - enum: - - toradex,colibri-imx6ull-wifi-eval # Colibri iMX6ULL Wi-Fi / BT M. on Colibri Evaluation Board - - const: toradex,colibri-imx6ull-wifi # Colibri iMX6ULL Wi-Fi / BT Module - - const: fsl,imx6dl + - toradex,colibri-imx6ull-wifi-eval # Colibri iMX6ULL Wi-Fi / BT M. on Colibri Eval. B. V3 + - toradex,colibri-imx6ull-wifi-aster # Colibri iMX6ULL Wi-Fi / BT M. on Aster Carrier Board + - toradex,colibri-imx6ull-wifi-iris # Colibri iMX6ULL Wi-Fi / BT M. on Iris Carrier Board + - toradex,colibri-imx6ull-wifi-iris-v2 # Colibri iMX6ULL Wi-Fi / BT M. on Iris V2 Carrier Board + - const: toradex,colibri-imx6ull-wifi # Colibri iMX6ULL Wi-Fi / BT Module + - const: fsl,imx6ull - description: Kontron N6411 S Board items: @@ -667,6 +703,21 @@ properties: - const: kontron,imx6ull-n6411-som - const: fsl,imx6ull + - description: TQ Systems TQMa6ULLx SoM on MBa6ULx board + items: + - enum: + - tq,imx6ull-tqma6ull2-mba6ulx + - const: tq,imx6ull-tqma6ull2 # MCIMX6Y2 + - const: fsl,imx6ull + + - description: TQ Systems TQMa6ULLxL SoM on MBa6ULx[L] board + items: + - enum: + - tq,imx6ull-tqma6ull2l-mba6ulx # using LGA adapter + - tq,imx6ull-tqma6ull2l-mba6ulxl + - const: tq,imx6ull-tqma6ull2l # MCIMX6Y2, LGA SoM variant + - const: fsl,imx6ull + - description: i.MX6ULZ based Boards items: - enum: @@ -707,6 +758,7 @@ properties: - kam,imx7d-flex-concentrator-mfg # Kamstrup OMNIA Flex Concentrator in manufacturing mode - novtech,imx7d-meerkat96 # i.MX7 Meerkat96 Board - remarkable,imx7d-remarkable2 # i.MX7D ReMarkable 2 E-Ink Tablet + - storopack,imx7d-smegw01 # Storopack i.MX7D SMEGW01 - technexion,imx7d-pico-dwarf # TechNexion i.MX7D Pico-Dwarf - technexion,imx7d-pico-hobbit # TechNexion i.MX7D Pico-Hobbit - technexion,imx7d-pico-nymph # TechNexion i.MX7D Pico-Nymph @@ -762,6 +814,7 @@ properties: - enum: - beacon,imx8mm-beacon-kit # i.MX8MM Beacon Development Kit - boundary,imx8mm-nitrogen8mm # i.MX8MM Nitrogen Board + - dmo,imx8mm-data-modul-edm-sbc # i.MX8MM eDM SBC - emtrion,emcon-mx8mm-avari # emCON-MX8MM SoM on Avari Base - fsl,imx8mm-ddr4-evk # i.MX8MM DDR4 EVK Board - fsl,imx8mm-evk # i.MX8MM EVK Board @@ -772,6 +825,7 @@ properties: - gw,imx8mm-gw7902 # i.MX8MM Gateworks Board - gw,imx8mm-gw7903 # i.MX8MM Gateworks Board - kontron,imx8mm-n801x-som # i.MX8MM Kontron SL (N801X) SOM + - menlo,mx8menlo # i.MX8MM Menlo board with Verdin SoM - toradex,verdin-imx8mm # Verdin iMX8M Mini Modules - toradex,verdin-imx8mm-nonwifi # Verdin iMX8M Mini Modules without Wi-Fi / BT - toradex,verdin-imx8mm-wifi # Verdin iMX8M Mini Wi-Fi / BT Modules @@ -834,6 +888,7 @@ properties: - beacon,imx8mn-beacon-kit # i.MX8MN Beacon Development Kit - bsh,imx8mn-bsh-smm-s2 # i.MX8MN BSH SystemMaster S2 - bsh,imx8mn-bsh-smm-s2pro # i.MX8MN BSH SystemMaster S2 PRO + - fsl,imx8mn-ddr3l-evk # i.MX8MN DDR3L EVK Board - fsl,imx8mn-ddr4-evk # i.MX8MN DDR4 EVK Board - fsl,imx8mn-evk # i.MX8MN LPDDR4 EVK Board - gw,imx8mn-gw7902 # i.MX8MM Gateworks Board @@ -860,6 +915,17 @@ properties: items: - enum: - fsl,imx8mp-evk # i.MX8MP EVK Board + - gateworks,imx8mp-gw74xx # i.MX8MP Gateworks Board + - toradex,verdin-imx8mp # Verdin iMX8M Plus Modules + - toradex,verdin-imx8mp-nonwifi # Verdin iMX8M Plus Modules without Wi-Fi / BT + - toradex,verdin-imx8mp-wifi # Verdin iMX8M Plus Wi-Fi / BT Modules + - const: fsl,imx8mp + + - description: Engicam i.Core MX8M Plus SoM based boards + items: + - enum: + - engicam,icore-mx8mp-edimm2.2 # i.MX8MP Engicam i.Core MX8M Plus EDIMM2.2 Starter Kit + - const: engicam,icore-mx8mp # i.MX8MP Engicam i.Core MX8M Plus SoM - const: fsl,imx8mp - description: PHYTEC phyCORE-i.MX8MP SoM based boards @@ -868,6 +934,24 @@ properties: - const: phytec,imx8mp-phycore-som # phyCORE-i.MX8MP SoM - const: fsl,imx8mp + - description: Toradex Boards with Verdin iMX8M Plus Modules + items: + - enum: + - toradex,verdin-imx8mp-nonwifi-dahlia # Verdin iMX8M Plus Module on Dahlia + - toradex,verdin-imx8mp-nonwifi-dev # Verdin iMX8M Plus Module on Verdin Development Board + - const: toradex,verdin-imx8mp-nonwifi # Verdin iMX8M Plus Module without Wi-Fi / BT + - const: toradex,verdin-imx8mp # Verdin iMX8M Plus Module + - const: fsl,imx8mp + + - description: Toradex Boards with Verdin iMX8M Plus Wi-Fi / BT Modules + items: + - enum: + - toradex,verdin-imx8mp-wifi-dahlia # Verdin iMX8M Plus Wi-Fi / BT Module on Dahlia + - toradex,verdin-imx8mp-wifi-dev # Verdin iMX8M Plus Wi-Fi / BT M. on Verdin Development B. + - const: toradex,verdin-imx8mp-wifi # Verdin iMX8M Plus Wi-Fi / BT Module + - const: toradex,verdin-imx8mp # Verdin iMX8M Plus Module + - const: fsl,imx8mp + - description: i.MX8MQ based Boards items: - enum: @@ -999,6 +1083,7 @@ properties: - description: LS1021A based Boards items: - enum: + - fsl,ls1021a-iot - fsl,ls1021a-moxa-uc-8410a - fsl,ls1021a-qds - fsl,ls1021a-tsn diff --git a/Documentation/devicetree/bindings/arm/mediatek.yaml b/Documentation/devicetree/bindings/arm/mediatek.yaml index ab0593c77321..4a2bd9759c47 100644 --- a/Documentation/devicetree/bindings/arm/mediatek.yaml +++ b/Documentation/devicetree/bindings/arm/mediatek.yaml @@ -133,6 +133,11 @@ properties: - const: mediatek,mt8183 - items: - enum: + - mediatek,mt8192-evb + - const: mediatek,mt8192 + - items: + - enum: + - mediatek,mt8195-demo - mediatek,mt8195-evb - const: mediatek,mt8195 - description: Google Burnet (HP Chromebook x360 11MK G3 EE) diff --git a/Documentation/devicetree/bindings/arm/mediatek/mediatek,pericfg.yaml b/Documentation/devicetree/bindings/arm/mediatek/mediatek,pericfg.yaml index 8723dfe34bab..611f666f359d 100644 --- a/Documentation/devicetree/bindings/arm/mediatek/mediatek,pericfg.yaml +++ b/Documentation/devicetree/bindings/arm/mediatek/mediatek,pericfg.yaml @@ -26,6 +26,7 @@ properties: - mediatek,mt8135-pericfg - mediatek,mt8173-pericfg - mediatek,mt8183-pericfg + - mediatek,mt8195-pericfg - mediatek,mt8516-pericfg - const: syscon - items: diff --git a/Documentation/devicetree/bindings/arm/omap/prcm.txt b/Documentation/devicetree/bindings/arm/omap/prcm.txt index 3eb6d7afff14..431ef8c56a13 100644 --- a/Documentation/devicetree/bindings/arm/omap/prcm.txt +++ b/Documentation/devicetree/bindings/arm/omap/prcm.txt @@ -31,12 +31,17 @@ Required properties: (base address and length) - clocks: clocks for this module - clockdomains: clockdomains for this module +- #clock-cells: From common clock binding +- clock-output-names: From common clock binding + Example: -cm: cm@48004000 { +cm: clock@48004000 { compatible = "ti,omap3-cm"; reg = <0x48004000 0x4000>; + #clock-cells = <0>; + clock-output-names = "cm"; cm_clocks: clocks { #address-cells = <1>; diff --git a/Documentation/devicetree/bindings/arm/qcom.yaml b/Documentation/devicetree/bindings/arm/qcom.yaml index 129cdd246223..7f89ab344d3f 100644 --- a/Documentation/devicetree/bindings/arm/qcom.yaml +++ b/Documentation/devicetree/bindings/arm/qcom.yaml @@ -99,6 +99,7 @@ properties: - items: - enum: + - asus,sparrow - lg,lenok - const: qcom,apq8026 diff --git a/Documentation/devicetree/bindings/arm/renesas.yaml b/Documentation/devicetree/bindings/arm/renesas.yaml index fa435d6fda77..ff80152f092f 100644 --- a/Documentation/devicetree/bindings/arm/renesas.yaml +++ b/Documentation/devicetree/bindings/arm/renesas.yaml @@ -327,6 +327,18 @@ properties: - const: renesas,spider-cpu - const: renesas,r8a779f0 + - description: R-Car V4H (R8A779G0) + items: + - enum: + - renesas,white-hawk-cpu # White Hawk CPU board (RTP8A779G0ASKB0FC0SA000) + - const: renesas,r8a779g0 + + - items: + - enum: + - renesas,white-hawk-breakout # White Hawk BreakOut board (RTP8A779G0ASKB0SB0SA000) + - const: renesas,white-hawk-cpu + - const: renesas,r8a779g0 + - description: R-Car H3e (R8A779M0) items: - enum: @@ -406,6 +418,8 @@ properties: - description: RZ/G2UL (R9A07G043) items: - enum: + - renesas,smarc-evk # SMARC EVK + - enum: - renesas,r9a07g043u11 # RZ/G2UL Type-1 - renesas,r9a07g043u12 # RZ/G2UL Type-2 - const: renesas,r9a07g043 @@ -430,6 +444,12 @@ properties: - renesas,r9a07g054l2 # Dual Cortex-A55 RZ/V2L - const: renesas,r9a07g054 + - description: RZ/V2M (R9A09G011) + items: + - enum: + - renesas,rzv2mevk2 # RZ/V2M Eval Board v2.0 + - const: renesas,r9a09g011 + additionalProperties: true ... diff --git a/Documentation/devicetree/bindings/arm/rockchip.yaml b/Documentation/devicetree/bindings/arm/rockchip.yaml index eece92f83a2d..cf9eb1e8326a 100644 --- a/Documentation/devicetree/bindings/arm/rockchip.yaml +++ b/Documentation/devicetree/bindings/arm/rockchip.yaml @@ -133,6 +133,11 @@ properties: - firefly,roc-rk3399-pc-plus - const: rockchip,rk3399 + - description: Firefly Station M2 + items: + - const: firefly,rk3566-roc-pc + - const: rockchip,rk3566 + - description: FriendlyElec NanoPi R2S items: - const: friendlyarm,nanopi-r2s @@ -502,9 +507,18 @@ properties: - const: pine64,rockpro64 - const: rockchip,rk3399 - - description: Pine64 Quartz64 Model A + - description: Pine64 Quartz64 Model A/B items: - - const: pine64,quartz64-a + - enum: + - pine64,quartz64-a + - pine64,quartz64-b + - const: rockchip,rk3566 + + - description: Pine64 SoQuartz SoM + items: + - enum: + - pine64,soquartz-cm4io + - const: pine64,soquartz - const: rockchip,rk3566 - description: Radxa Rock @@ -545,6 +559,11 @@ properties: - const: radxa,rock2-square - const: rockchip,rk3288 + - description: Radxa ROCK3 Model A + items: + - const: radxa,rock3a + - const: rockchip,rk3568 + - description: Rikomagic MK808 v1 items: - const: rikomagic,mk808 diff --git a/Documentation/devicetree/bindings/arm/stm32/stm32.yaml b/Documentation/devicetree/bindings/arm/stm32/stm32.yaml index fa0a1b84122e..8b31565fee59 100644 --- a/Documentation/devicetree/bindings/arm/stm32/stm32.yaml +++ b/Documentation/devicetree/bindings/arm/stm32/stm32.yaml @@ -14,21 +14,6 @@ properties: const: "/" compatible: oneOf: - - description: DH STM32MP1 SoM based Boards - items: - - enum: - - arrow,stm32mp157a-avenger96 # Avenger96 - - dh,stm32mp153c-dhcom-drc02 - - dh,stm32mp157c-dhcom-pdk2 - - dh,stm32mp157c-dhcom-picoitx - - enum: - - dh,stm32mp153c-dhcom-som - - dh,stm32mp157a-dhcor-som - - dh,stm32mp157c-dhcom-som - - enum: - - st,stm32mp153 - - st,stm32mp157 - - description: emtrion STM32MP1 Argon based Boards items: - const: emtrion,stm32mp157c-emsbc-argon @@ -65,6 +50,21 @@ properties: - enum: - st,stm32mp135f-dk - const: st,stm32mp135 + + - description: ST STM32MP151 based Boards + items: + - enum: + - prt,prtt1a # Protonic PRTT1A + - prt,prtt1c # Protonic PRTT1C + - prt,prtt1s # Protonic PRTT1S + - const: st,stm32mp151 + + - description: DH STM32MP153 SoM based Boards + items: + - const: dh,stm32mp153c-dhcom-drc02 + - const: dh,stm32mp153c-dhcom-som + - const: st,stm32mp153 + - items: - enum: - shiratech,stm32mp157a-iot-box # IoT Box @@ -72,13 +72,45 @@ properties: - st,stm32mp157c-ed1 - st,stm32mp157a-dk1 - st,stm32mp157c-dk2 + - const: st,stm32mp157 + - items: + - const: st,stm32mp157a-dk1-scmi + - const: st,stm32mp157a-dk1 - const: st,stm32mp157 - items: + - const: st,stm32mp157c-dk2-scmi + - const: st,stm32mp157c-dk2 + - const: st,stm32mp157 + - items: + - const: st,stm32mp157c-ed1-scmi + - const: st,stm32mp157c-ed1 + - const: st,stm32mp157 + - items: + - const: st,stm32mp157c-ev1 + - const: st,stm32mp157c-ed1 + - const: st,stm32mp157 + - items: + - const: st,stm32mp157c-ev1-scmi - const: st,stm32mp157c-ev1 - const: st,stm32mp157c-ed1 - const: st,stm32mp157 + - description: DH STM32MP1 SoM based Boards + items: + - enum: + - arrow,stm32mp157a-avenger96 # Avenger96 + - const: dh,stm32mp157a-dhcor-som + - const: st,stm32mp157 + + - description: DH STM32MP1 SoM based Boards + items: + - enum: + - dh,stm32mp157c-dhcom-pdk2 + - dh,stm32mp157c-dhcom-picoitx + - const: dh,stm32mp157c-dhcom-som + - const: st,stm32mp157 + - description: Engicam i.Core STM32MP1 SoM based Boards items: - enum: @@ -103,6 +135,7 @@ properties: - const: oct,stm32mp15xx-osd32 - enum: - st,stm32mp157 + - description: Odyssey STM32MP1 SoM based Boards items: - enum: diff --git a/Documentation/devicetree/bindings/arm/sunxi.yaml b/Documentation/devicetree/bindings/arm/sunxi.yaml index 086c68771d2b..95278a6a9a8e 100644 --- a/Documentation/devicetree/bindings/arm/sunxi.yaml +++ b/Documentation/devicetree/bindings/arm/sunxi.yaml @@ -391,6 +391,11 @@ properties: - const: libretech,all-h5-cc-h5 - const: allwinner,sun50i-h5 + - description: Lichee Pi Nano + items: + - const: licheepi,licheepi-nano + - const: allwinner,suniv-f1c100s + - description: Lichee Pi One items: - const: licheepi,licheepi-one diff --git a/Documentation/devicetree/bindings/arm/syna.txt b/Documentation/devicetree/bindings/arm/syna.txt index d8b48f2edf1b..851f48ead927 100644 --- a/Documentation/devicetree/bindings/arm/syna.txt +++ b/Documentation/devicetree/bindings/arm/syna.txt @@ -18,10 +18,6 @@ stable binding/ABI. --------------------------------------------------------------- -Boards with the Synaptics AS370 SoC shall have the following properties: - Required root node property: - compatible: "syna,as370" - Boards with a SoC of the Marvell Berlin family, e.g. Armada 1500 shall have the following properties: diff --git a/Documentation/devicetree/bindings/arm/ux500.yaml b/Documentation/devicetree/bindings/arm/ux500.yaml index a46193ad94e0..17accb31bca0 100644 --- a/Documentation/devicetree/bindings/arm/ux500.yaml +++ b/Documentation/devicetree/bindings/arm/ux500.yaml @@ -40,6 +40,11 @@ properties: - const: samsung,codina - const: st-ericsson,u8500 + - description: Samsung Galaxy Exhibit (SGH-T599) + items: + - const: samsung,codina-tmo + - const: st-ericsson,u8500 + - description: Samsung Galaxy Beam (GT-I8530) items: - const: samsung,gavini diff --git a/Documentation/devicetree/bindings/clock/qcom,sc7280-lpasscorecc.yaml b/Documentation/devicetree/bindings/clock/qcom,sc7280-lpasscorecc.yaml new file mode 100644 index 000000000000..bad9135489de --- /dev/null +++ b/Documentation/devicetree/bindings/clock/qcom,sc7280-lpasscorecc.yaml @@ -0,0 +1,172 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/clock/qcom,sc7280-lpasscorecc.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Qualcomm LPASS Core & Audio Clock Controller Binding for SC7280 + +maintainers: + - Taniya Das <tdas@codeaurora.org> + +description: | + Qualcomm LPASS core and audio clock control module which supports the + clocks and power domains on SC7280. + + See also: + - dt-bindings/clock/qcom,lpasscorecc-sc7280.h + - dt-bindings/clock/qcom,lpassaudiocc-sc7280.h + +properties: + clocks: true + + clock-names: true + + compatible: + enum: + - qcom,sc7280-lpassaoncc + - qcom,sc7280-lpassaudiocc + - qcom,sc7280-lpasscorecc + - qcom,sc7280-lpasshm + + power-domains: + maxItems: 1 + + '#clock-cells': + const: 1 + + '#power-domain-cells': + const: 1 + + reg: + maxItems: 1 + +required: + - compatible + - reg + - clocks + - clock-names + - '#clock-cells' + - '#power-domain-cells' + +additionalProperties: false + +allOf: + - if: + properties: + compatible: + contains: + const: qcom,sc7280-lpassaudiocc + + then: + properties: + clocks: + items: + - description: Board XO source + - description: LPASS_AON_CC_MAIN_RCG_CLK_SRC + + clock-names: + items: + - const: bi_tcxo + - const: lpass_aon_cc_main_rcg_clk_src + - if: + properties: + compatible: + contains: + enum: + - qcom,sc7280-lpassaoncc + + then: + properties: + clocks: + items: + - description: Board XO source + - description: Board XO active only source + - description: LPASS_AON_CC_MAIN_RCG_CLK_SRC + + clock-names: + items: + - const: bi_tcxo + - const: bi_tcxo_ao + - const: iface + + - if: + properties: + compatible: + contains: + enum: + - qcom,sc7280-lpasshm + - qcom,sc7280-lpasscorecc + + then: + properties: + clocks: + items: + - description: Board XO source + + clock-names: + items: + - const: bi_tcxo + +examples: + - | + #include <dt-bindings/clock/qcom,rpmh.h> + #include <dt-bindings/clock/qcom,gcc-sc7280.h> + #include <dt-bindings/clock/qcom,lpassaudiocc-sc7280.h> + #include <dt-bindings/clock/qcom,lpasscorecc-sc7280.h> + lpass_audiocc: clock-controller@3300000 { + compatible = "qcom,sc7280-lpassaudiocc"; + reg = <0x3300000 0x30000>; + clocks = <&rpmhcc RPMH_CXO_CLK>, + <&lpass_aon LPASS_AON_CC_MAIN_RCG_CLK_SRC>; + clock-names = "bi_tcxo", "lpass_aon_cc_main_rcg_clk_src"; + power-domains = <&lpass_aon LPASS_AON_CC_LPASS_AUDIO_HM_GDSC>; + #clock-cells = <1>; + #power-domain-cells = <1>; + }; + + - | + #include <dt-bindings/clock/qcom,rpmh.h> + #include <dt-bindings/clock/qcom,gcc-sc7280.h> + #include <dt-bindings/clock/qcom,lpassaudiocc-sc7280.h> + #include <dt-bindings/clock/qcom,lpasscorecc-sc7280.h> + lpass_hm: clock-controller@3c00000 { + compatible = "qcom,sc7280-lpasshm"; + reg = <0x3c00000 0x28>; + clocks = <&rpmhcc RPMH_CXO_CLK>; + clock-names = "bi_tcxo"; + #clock-cells = <1>; + #power-domain-cells = <1>; + }; + + - | + #include <dt-bindings/clock/qcom,rpmh.h> + #include <dt-bindings/clock/qcom,gcc-sc7280.h> + #include <dt-bindings/clock/qcom,lpassaudiocc-sc7280.h> + #include <dt-bindings/clock/qcom,lpasscorecc-sc7280.h> + lpasscore: clock-controller@3900000 { + compatible = "qcom,sc7280-lpasscorecc"; + reg = <0x3900000 0x50000>; + clocks = <&rpmhcc RPMH_CXO_CLK>; + clock-names = "bi_tcxo"; + power-domains = <&lpass_hm LPASS_CORE_CC_LPASS_CORE_HM_GDSC>; + #clock-cells = <1>; + #power-domain-cells = <1>; + }; + + - | + #include <dt-bindings/clock/qcom,rpmh.h> + #include <dt-bindings/clock/qcom,gcc-sc7280.h> + #include <dt-bindings/clock/qcom,lpassaudiocc-sc7280.h> + #include <dt-bindings/clock/qcom,lpasscorecc-sc7280.h> + lpass_aon: clock-controller@3380000 { + compatible = "qcom,sc7280-lpassaoncc"; + reg = <0x3380000 0x30000>; + clocks = <&rpmhcc RPMH_CXO_CLK>, <&rpmhcc RPMH_CXO_CLK_A>, + <&lpasscore LPASS_CORE_CC_CORE_CLK>; + clock-names = "bi_tcxo", "bi_tcxo_ao","iface"; + #clock-cells = <1>; + #power-domain-cells = <1>; + }; + +... diff --git a/Documentation/devicetree/bindings/clock/samsung,exynosautov9-clock.yaml b/Documentation/devicetree/bindings/clock/samsung,exynosautov9-clock.yaml new file mode 100644 index 000000000000..eafc715d2d02 --- /dev/null +++ b/Documentation/devicetree/bindings/clock/samsung,exynosautov9-clock.yaml @@ -0,0 +1,219 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/clock/samsung,exynosautov9-clock.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Samsung Exynos Auto v9 SoC clock controller + +maintainers: + - Chanho Park <chanho61.park@samsung.com> + - Chanwoo Choi <cw00.choi@samsung.com> + - Krzysztof Kozlowski <krzk@kernel.org> + - Sylwester Nawrocki <s.nawrocki@samsung.com> + - Tomasz Figa <tomasz.figa@gmail.com> + +description: | + Exynos Auto v9 clock controller is comprised of several CMU units, generating + clocks for different domains. Those CMU units are modeled as separate device + tree nodes, and might depend on each other. Root clocks in that clock tree are + two external clocks:: OSCCLK/XTCXO (26 MHz) and RTCCLK/XrtcXTI (32768 Hz). + The external OSCCLK must be defined as fixed-rate clock in dts. + + CMU_TOP is a top-level CMU, where all base clocks are prepared using PLLs and + dividers; all other clocks of function blocks (other CMUs) are usually + derived from CMU_TOP. + + Each clock is assigned an identifier and client nodes can use this identifier + to specify the clock which they consume. All clocks available for usage + in clock consumer nodes are defined as preprocessor macros in + 'include/dt-bindings/clock/samsung,exynosautov9.h' header. + +properties: + compatible: + enum: + - samsung,exynosautov9-cmu-top + - samsung,exynosautov9-cmu-busmc + - samsung,exynosautov9-cmu-core + - samsung,exynosautov9-cmu-fsys2 + - samsung,exynosautov9-cmu-peric0 + - samsung,exynosautov9-cmu-peric1 + - samsung,exynosautov9-cmu-peris + + clocks: + minItems: 1 + maxItems: 5 + + clock-names: + minItems: 1 + maxItems: 5 + + "#clock-cells": + const: 1 + + reg: + maxItems: 1 + +allOf: + - if: + properties: + compatible: + contains: + const: samsung,exynosautov9-cmu-top + + then: + properties: + clocks: + items: + - description: External reference clock (26 MHz) + + clock-names: + items: + - const: oscclk + + - if: + properties: + compatible: + contains: + const: samsung,exynosautov9-cmu-busmc + + then: + properties: + clocks: + items: + - description: External reference clock (26 MHz) + - description: CMU_BUSMC bus clock (from CMU_TOP) + + clock-names: + items: + - const: oscclk + - const: dout_clkcmu_busmc_bus + + - if: + properties: + compatible: + contains: + const: samsung,exynosautov9-cmu-core + + then: + properties: + clocks: + items: + - description: External reference clock (26 MHz) + - description: CMU_CORE bus clock (from CMU_TOP) + + clock-names: + items: + - const: oscclk + - const: dout_clkcmu_core_bus + + - if: + properties: + compatible: + contains: + const: samsung,exynosautov9-cmu-fsys2 + + then: + properties: + clocks: + items: + - description: External reference clock (26 MHz) + - description: CMU_FSYS2 bus clock (from CMU_TOP) + - description: UFS clock (from CMU_TOP) + - description: Ethernet clock (from CMU_TOP) + + clock-names: + items: + - const: oscclk + - const: dout_clkcmu_fsys2_bus + - const: dout_fsys2_clkcmu_ufs_embd + - const: dout_fsys2_clkcmu_ethernet + + - if: + properties: + compatible: + contains: + const: samsung,exynosautov9-cmu-peric0 + + then: + properties: + clocks: + items: + - description: External reference clock (26 MHz) + - description: CMU_PERIC0 bus clock (from CMU_TOP) + - description: PERIC0 IP clock (from CMU_TOP) + + clock-names: + items: + - const: oscclk + - const: dout_clkcmu_peric0_bus + - const: dout_clkcmu_peric0_ip + + - if: + properties: + compatible: + contains: + const: samsung,exynosautov9-cmu-peric1 + + then: + properties: + clocks: + items: + - description: External reference clock (26 MHz) + - description: CMU_PERIC1 bus clock (from CMU_TOP) + - description: PERIC1 IP clock (from CMU_TOP) + + clock-names: + items: + - const: oscclk + - const: dout_clkcmu_peric1_bus + - const: dout_clkcmu_peric1_ip + + - if: + properties: + compatible: + contains: + const: samsung,exynosautov9-cmu-peris + + then: + properties: + clocks: + items: + - description: External reference clock (26 MHz) + - description: CMU_PERIS bus clock (from CMU_TOP) + + clock-names: + items: + - const: oscclk + - const: dout_clkcmu_peris_bus + +required: + - compatible + - "#clock-cells" + - clocks + - clock-names + - reg + +additionalProperties: false + +examples: + # Clock controller node for CMU_FSYS2 + - | + #include <dt-bindings/clock/samsung,exynosautov9.h> + + cmu_fsys2: clock-controller@17c00000 { + compatible = "samsung,exynosautov9-cmu-fsys2"; + reg = <0x17c00000 0x8000>; + #clock-cells = <1>; + + clocks = <&xtcxo>, + <&cmu_top DOUT_CLKCMU_FSYS2_BUS>, + <&cmu_top DOUT_CLKCMU_FSYS2_UFS_EMBD>, + <&cmu_top DOUT_CLKCMU_FSYS2_ETHERNET>; + clock-names = "oscclk", + "dout_clkcmu_fsys2_bus", + "dout_fsys2_clkcmu_ufs_embd", + "dout_fsys2_clkcmu_ethernet"; + }; + +... diff --git a/Documentation/devicetree/bindings/clock/st,stm32mp1-rcc.yaml b/Documentation/devicetree/bindings/clock/st,stm32mp1-rcc.yaml index a0ae4867ed27..45b94124366c 100644 --- a/Documentation/devicetree/bindings/clock/st,stm32mp1-rcc.yaml +++ b/Documentation/devicetree/bindings/clock/st,stm32mp1-rcc.yaml @@ -58,6 +58,8 @@ properties: - st,stm32mp1-rcc-secure - st,stm32mp1-rcc - const: syscon + clocks: true + clock-names: true reg: maxItems: 1 @@ -68,14 +70,53 @@ required: - compatible - reg +if: + properties: + compatible: + contains: + enum: + - st,stm32mp1-rcc-secure +then: + properties: + clocks: + description: Specifies oscillators. + maxItems: 5 + + clock-names: + items: + - const: hse + - const: hsi + - const: csi + - const: lse + - const: lsi + required: + - clocks + - clock-names +else: + properties: + clocks: + description: + Specifies the external RX clock for ethernet MAC. + maxItems: 1 + + clock-names: + const: ETH_RX_CLK/ETH_REF_CLK + additionalProperties: false examples: - | + #include <dt-bindings/clock/stm32mp1-clks.h> rcc: rcc@50000000 { compatible = "st,stm32mp1-rcc-secure", "syscon"; reg = <0x50000000 0x1000>; #clock-cells = <1>; #reset-cells = <1>; + clock-names = "hse", "hsi", "csi", "lse", "lsi"; + clocks = <&scmi_clk CK_SCMI_HSE>, + <&scmi_clk CK_SCMI_HSI>, + <&scmi_clk CK_SCMI_CSI>, + <&scmi_clk CK_SCMI_LSE>, + <&scmi_clk CK_SCMI_LSI>; }; ... diff --git a/Documentation/devicetree/bindings/clock/ti-clkctrl.txt b/Documentation/devicetree/bindings/clock/ti-clkctrl.txt index 18af6b9409e3..d20db7974a38 100644 --- a/Documentation/devicetree/bindings/clock/ti-clkctrl.txt +++ b/Documentation/devicetree/bindings/clock/ti-clkctrl.txt @@ -21,6 +21,7 @@ Required properties : "ti,clkctrl-l4-per" "ti,clkctrl-l4-secure" "ti,clkctrl-l4-wkup" +- clock-output-names : from common clock binding - #clock-cells : shall contain 2 with the first entry being the instance offset from the clock domain base and the second being the clock index @@ -32,7 +33,8 @@ Example: Clock controller node on omap 4430: l4per: cm@1400 { cm_l4per@0 { cm_l4per_clkctrl: clock@20 { - compatible = "ti,clkctrl-l4-per", "ti,clkctrl"; + compatible = "ti,clkctrl"; + clock-output-names = "l4_per"; reg = <0x20 0x1b0>; #clock-cells = <2>; }; diff --git a/Documentation/devicetree/bindings/clock/ti/clockdomain.txt b/Documentation/devicetree/bindings/clock/ti/clockdomain.txt index cb76b3f2b341..9c6199249ce5 100644 --- a/Documentation/devicetree/bindings/clock/ti/clockdomain.txt +++ b/Documentation/devicetree/bindings/clock/ti/clockdomain.txt @@ -17,6 +17,9 @@ Required properties: - #clock-cells : from common clock binding; shall be set to 0. - clocks : link phandles of clocks within this domain +Optional properties: +- clock-output-names : from common clock binding. + Examples: dss_clkdm: dss_clkdm { compatible = "ti,clockdomain"; diff --git a/Documentation/devicetree/bindings/clock/ti/composite.txt b/Documentation/devicetree/bindings/clock/ti/composite.txt index 5f43c4706b09..33ac7c9ad053 100644 --- a/Documentation/devicetree/bindings/clock/ti/composite.txt +++ b/Documentation/devicetree/bindings/clock/ti/composite.txt @@ -27,6 +27,9 @@ Required properties: - clocks : link phandles of component clocks - #clock-cells : from common clock binding; shall be set to 0. +Optional properties: +- clock-output-names : from common clock binding. + Examples: usb_l4_gate_ick: usb_l4_gate_ick { diff --git a/Documentation/devicetree/bindings/clock/ti/fixed-factor-clock.txt b/Documentation/devicetree/bindings/clock/ti/fixed-factor-clock.txt index 662b36d53bf0..518e3c142276 100644 --- a/Documentation/devicetree/bindings/clock/ti/fixed-factor-clock.txt +++ b/Documentation/devicetree/bindings/clock/ti/fixed-factor-clock.txt @@ -16,6 +16,7 @@ Required properties: - clocks: parent clock. Optional properties: +- clock-output-names : from common clock binding. - ti,autoidle-shift: bit shift of the autoidle enable bit for the clock, see [2] - reg: offset for the autoidle register of this clock, see [2] diff --git a/Documentation/devicetree/bindings/clock/ti/gate.txt b/Documentation/devicetree/bindings/clock/ti/gate.txt index 56d603c1f716..b4820b1de4f0 100644 --- a/Documentation/devicetree/bindings/clock/ti/gate.txt +++ b/Documentation/devicetree/bindings/clock/ti/gate.txt @@ -36,6 +36,7 @@ Required properties: ti,clkdm-gate-clock type Optional properties: +- clock-output-names : from common clock binding. - ti,bit-shift : bit shift for programming the clock gate, invalid for ti,clkdm-gate-clock type - ti,set-bit-to-disable : inverts default gate programming. Setting the bit diff --git a/Documentation/devicetree/bindings/clock/ti/interface.txt b/Documentation/devicetree/bindings/clock/ti/interface.txt index 3f4704040140..94ec77dc3c59 100644 --- a/Documentation/devicetree/bindings/clock/ti/interface.txt +++ b/Documentation/devicetree/bindings/clock/ti/interface.txt @@ -28,6 +28,7 @@ Required properties: - reg : base address for the control register Optional properties: +- clock-output-names : from common clock binding. - ti,bit-shift : bit shift for the bit enabling/disabling the clock (default 0) Examples: diff --git a/Documentation/devicetree/bindings/clock/ti/mux.txt b/Documentation/devicetree/bindings/clock/ti/mux.txt index eec8994b9be8..e17425a58621 100644 --- a/Documentation/devicetree/bindings/clock/ti/mux.txt +++ b/Documentation/devicetree/bindings/clock/ti/mux.txt @@ -42,6 +42,7 @@ Required properties: - reg : register offset for register controlling adjustable mux Optional properties: +- clock-output-names : from common clock binding. - ti,bit-shift : number of bits to shift the bit-mask, defaults to 0 if not present - ti,index-starts-at-one : valid input select programming starts at 1, not diff --git a/Documentation/devicetree/bindings/dma/fsl-imx-dma.txt b/Documentation/devicetree/bindings/dma/fsl-imx-dma.txt index 7bd8847d6394..1c9929d53727 100644 --- a/Documentation/devicetree/bindings/dma/fsl-imx-dma.txt +++ b/Documentation/devicetree/bindings/dma/fsl-imx-dma.txt @@ -13,8 +13,10 @@ Required properties: - #dma-cells : Has to be 1. imx-dma does not support anything else. Optional properties: -- #dma-channels : Number of DMA channels supported. Should be 16. -- #dma-requests : Number of DMA requests supported. +- dma-channels : Number of DMA channels supported. Should be 16. +- #dma-channels : deprecated +- dma-requests : Number of DMA requests supported. +- #dma-requests : deprecated Example: @@ -23,7 +25,7 @@ Example: reg = <0x10001000 0x1000>; interrupts = <32 33>; #dma-cells = <1>; - #dma-channels = <16>; + dma-channels = <16>; }; diff --git a/Documentation/devicetree/bindings/memory-controllers/nvidia,tegra186-mc.yaml b/Documentation/devicetree/bindings/memory-controllers/nvidia,tegra186-mc.yaml index 13c4c82fd0d3..c7cfa6c2cd81 100644 --- a/Documentation/devicetree/bindings/memory-controllers/nvidia,tegra186-mc.yaml +++ b/Documentation/devicetree/bindings/memory-controllers/nvidia,tegra186-mc.yaml @@ -34,8 +34,12 @@ properties: - nvidia,tegra234-mc reg: - minItems: 1 - maxItems: 3 + minItems: 6 + maxItems: 18 + + reg-names: + minItems: 6 + maxItems: 18 interrupts: items: @@ -142,7 +146,18 @@ allOf: then: properties: reg: - maxItems: 1 + maxItems: 6 + description: 5 memory controller channels and 1 for stream-id registers + + reg-names: + maxItems: 6 + items: + - const: sid + - const: broadcast + - const: ch0 + - const: ch1 + - const: ch2 + - const: ch3 - if: properties: @@ -151,7 +166,30 @@ allOf: then: properties: reg: - minItems: 3 + minItems: 18 + description: 17 memory controller channels and 1 for stream-id registers + + reg-names: + minItems: 18 + items: + - const: sid + - const: broadcast + - const: ch0 + - const: ch1 + - const: ch2 + - const: ch3 + - const: ch4 + - const: ch5 + - const: ch6 + - const: ch7 + - const: ch8 + - const: ch9 + - const: ch10 + - const: ch11 + - const: ch12 + - const: ch13 + - const: ch14 + - const: ch15 - if: properties: @@ -160,13 +198,37 @@ allOf: then: properties: reg: - minItems: 3 + minItems: 18 + description: 17 memory controller channels and 1 for stream-id registers + + reg-names: + minItems: 18 + items: + - const: sid + - const: broadcast + - const: ch0 + - const: ch1 + - const: ch2 + - const: ch3 + - const: ch4 + - const: ch5 + - const: ch6 + - const: ch7 + - const: ch8 + - const: ch9 + - const: ch10 + - const: ch11 + - const: ch12 + - const: ch13 + - const: ch14 + - const: ch15 additionalProperties: false required: - compatible - reg + - reg-names - interrupts - "#address-cells" - "#size-cells" @@ -182,7 +244,13 @@ examples: memory-controller@2c00000 { compatible = "nvidia,tegra186-mc"; - reg = <0x0 0x02c00000 0x0 0xb0000>; + reg = <0x0 0x02c00000 0x0 0x10000>, /* MC-SID */ + <0x0 0x02c10000 0x0 0x10000>, /* Broadcast channel */ + <0x0 0x02c20000 0x0 0x10000>, /* MC0 */ + <0x0 0x02c30000 0x0 0x10000>, /* MC1 */ + <0x0 0x02c40000 0x0 0x10000>, /* MC2 */ + <0x0 0x02c50000 0x0 0x10000>; /* MC3 */ + reg-names = "sid", "broadcast", "ch0", "ch1", "ch2", "ch3"; interrupts = <GIC_SPI 223 IRQ_TYPE_LEVEL_HIGH>; #address-cells = <2>; diff --git a/Documentation/devicetree/bindings/memory-controllers/renesas,rpc-if.yaml b/Documentation/devicetree/bindings/memory-controllers/renesas,rpc-if.yaml index 9a6dbf54b540..6744d17f1efd 100644 --- a/Documentation/devicetree/bindings/memory-controllers/renesas,rpc-if.yaml +++ b/Documentation/devicetree/bindings/memory-controllers/renesas,rpc-if.yaml @@ -39,6 +39,7 @@ properties: - items: - enum: + - renesas,r9a07g043-rpc-if # RZ/G2UL - renesas,r9a07g044-rpc-if # RZ/G2{L,LC} - renesas,r9a07g054-rpc-if # RZ/V2L - const: renesas,rzg2l-rpc-if diff --git a/Documentation/devicetree/bindings/net/wireless/silabs,wfx.yaml b/Documentation/devicetree/bindings/net/wireless/silabs,wfx.yaml index f5a531738d93..76199a67d628 100644 --- a/Documentation/devicetree/bindings/net/wireless/silabs,wfx.yaml +++ b/Documentation/devicetree/bindings/net/wireless/silabs,wfx.yaml @@ -39,6 +39,7 @@ properties: compatible: items: - enum: + - prt,prtt1c-wfm200 # Protonic PRTT1C Board - silabs,brd4001a # WGM160P Evaluation Board - silabs,brd8022a # WF200 Evaluation Board - silabs,brd8023a # WFM200 Evaluation Board diff --git a/Documentation/devicetree/bindings/power/renesas,rcar-sysc.yaml b/Documentation/devicetree/bindings/power/renesas,rcar-sysc.yaml index 76c417990f12..8d56bedd3390 100644 --- a/Documentation/devicetree/bindings/power/renesas,rcar-sysc.yaml +++ b/Documentation/devicetree/bindings/power/renesas,rcar-sysc.yaml @@ -44,6 +44,7 @@ properties: - renesas,r8a77995-sysc # R-Car D3 - renesas,r8a779a0-sysc # R-Car V3U - renesas,r8a779f0-sysc # R-Car S4-8 + - renesas,r8a779g0-sysc # R-Car V4H reg: maxItems: 1 diff --git a/Documentation/devicetree/bindings/reset/renesas,rst.yaml b/Documentation/devicetree/bindings/reset/renesas,rst.yaml index bbe313bf1796..0d1b89e2fe9c 100644 --- a/Documentation/devicetree/bindings/reset/renesas,rst.yaml +++ b/Documentation/devicetree/bindings/reset/renesas,rst.yaml @@ -49,6 +49,7 @@ properties: - renesas,r8a77995-rst # R-Car D3 - renesas,r8a779a0-rst # R-Car V3U - renesas,r8a779f0-rst # R-Car S4-8 + - renesas,r8a779g0-rst # R-Car V4H reg: maxItems: 1 diff --git a/Documentation/devicetree/bindings/soc/imx/fsl,imx8mp-hdmi-blk-ctrl.yaml b/Documentation/devicetree/bindings/soc/imx/fsl,imx8mp-hdmi-blk-ctrl.yaml new file mode 100644 index 000000000000..563e1d0e327f --- /dev/null +++ b/Documentation/devicetree/bindings/soc/imx/fsl,imx8mp-hdmi-blk-ctrl.yaml @@ -0,0 +1,84 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/soc/imx/fsl,imx8mp-hdmi-blk-ctrl.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: NXP i.MX8MP HDMI blk-ctrl + +maintainers: + - Lucas Stach <l.stach@pengutronix.de> + +description: + The i.MX8MP HDMMI blk-ctrl is a top-level peripheral providing access to + the NoC and ensuring proper power sequencing of the display pipeline + peripherals located in the HDMI domain of the SoC. + +properties: + compatible: + items: + - const: fsl,imx8mp-hdmi-blk-ctrl + - const: syscon + + reg: + maxItems: 1 + + '#power-domain-cells': + const: 1 + + power-domains: + minItems: 8 + maxItems: 8 + + power-domain-names: + items: + - const: bus + - const: irqsteer + - const: lcdif + - const: pai + - const: pvi + - const: trng + - const: hdmi-tx + - const: hdmi-tx-phy + + clocks: + minItems: 4 + maxItems: 4 + + clock-names: + items: + - const: apb + - const: axi + - const: ref_266m + - const: ref_24m + +required: + - compatible + - reg + - power-domains + - power-domain-names + - clocks + - clock-names + +additionalProperties: false + +examples: + - | + #include <dt-bindings/clock/imx8mp-clock.h> + #include <dt-bindings/power/imx8mp-power.h> + + blk-ctrl@32fc0000 { + compatible = "fsl,imx8mp-hdmi-blk-ctrl", "syscon"; + reg = <0x32fc0000 0x23c>; + clocks = <&clk IMX8MP_CLK_HDMI_APB>, + <&clk IMX8MP_CLK_HDMI_ROOT>, + <&clk IMX8MP_CLK_HDMI_REF_266M>, + <&clk IMX8MP_CLK_HDMI_24M>; + clock-names = "apb", "axi", "ref_266m", "ref_24m"; + power-domains = <&pgc_hdmimix>, <&pgc_hdmimix>, <&pgc_hdmimix>, + <&pgc_hdmimix>, <&pgc_hdmimix>, <&pgc_hdmimix>, + <&pgc_hdmimix>, <&pgc_hdmi_phy>; + power-domain-names = "bus", "irqsteer", "lcdif", "pai", "pvi", "trng", + "hdmi-tx", "hdmi-tx-phy"; + #power-domain-cells = <1>; + }; diff --git a/Documentation/devicetree/bindings/soc/imx/fsl,imx8mp-media-blk-ctrl.yaml b/Documentation/devicetree/bindings/soc/imx/fsl,imx8mp-media-blk-ctrl.yaml new file mode 100644 index 000000000000..21d3ee486295 --- /dev/null +++ b/Documentation/devicetree/bindings/soc/imx/fsl,imx8mp-media-blk-ctrl.yaml @@ -0,0 +1,104 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/soc/imx/fsl,imx8mp-media-blk-ctrl.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: NXP i.MX8MP Media Block Control + +maintainers: + - Paul Elder <paul.elder@ideasonboard.com> + +description: + The i.MX8MP Media Block Control (MEDIA BLK_CTRL) is a top-level peripheral + providing access to the NoC and ensuring proper power sequencing of the + peripherals within the MEDIAMIX domain. + +properties: + compatible: + items: + - const: fsl,imx8mp-media-blk-ctrl + - const: syscon + + reg: + maxItems: 1 + + '#power-domain-cells': + const: 1 + + power-domains: + maxItems: 10 + + power-domain-names: + items: + - const: bus + - const: mipi-dsi1 + - const: mipi-csi1 + - const: lcdif1 + - const: isi + - const: mipi-csi2 + - const: lcdif2 + - const: isp + - const: dwe + - const: mipi-dsi2 + + clocks: + items: + - description: The APB clock + - description: The AXI clock + - description: The pixel clock for the first CSI2 receiver (aclk) + - description: The pixel clock for the second CSI2 receiver (aclk) + - description: The pixel clock for the first LCDIF (pix_clk) + - description: The pixel clock for the second LCDIF (pix_clk) + - description: The core clock for the ISP (clk) + - description: The MIPI-PHY reference clock used by DSI + + clock-names: + items: + - const: apb + - const: axi + - const: cam1 + - const: cam2 + - const: disp1 + - const: disp2 + - const: isp + - const: phy + +required: + - compatible + - reg + - '#power-domain-cells' + - power-domains + - power-domain-names + - clocks + - clock-names + +additionalProperties: false + +examples: + - | + #include <dt-bindings/clock/imx8mp-clock.h> + #include <dt-bindings/power/imx8mp-power.h> + + media_blk_ctl: blk-ctl@32ec0000 { + compatible = "fsl,imx8mp-media-blk-ctrl", "syscon"; + reg = <0x32ec0000 0x138>; + power-domains = <&mediamix_pd>, <&mipi_phy1_pd>, <&mipi_phy1_pd>, + <&mediamix_pd>, <&mediamix_pd>, <&mipi_phy2_pd>, + <&mediamix_pd>, <&ispdwp_pd>, <&ispdwp_pd>, + <&mipi_phy2_pd>; + power-domain-names = "bus", "mipi-dsi1", "mipi-csi1", "lcdif1", "isi", + "mipi-csi2", "lcdif2", "isp1", "dwe", "mipi-dsi2"; + clocks = <&clk IMX8MP_CLK_MEDIA_APB_ROOT>, + <&clk IMX8MP_CLK_MEDIA_AXI_ROOT>, + <&clk IMX8MP_CLK_MEDIA_CAM1_PIX_ROOT>, + <&clk IMX8MP_CLK_MEDIA_CAM2_PIX_ROOT>, + <&clk IMX8MP_CLK_MEDIA_DISP1_PIX_ROOT>, + <&clk IMX8MP_CLK_MEDIA_DISP2_PIX_ROOT>, + <&clk IMX8MP_CLK_MEDIA_ISP_ROOT>, + <&clk IMX8MP_CLK_MEDIA_MIPI_PHY1_REF_ROOT>; + clock-names = "apb", "axi", "cam1", "cam2", "disp1", "disp2", + "isp", "phy"; + #power-domain-cells = <1>; + }; +... diff --git a/Documentation/devicetree/bindings/power/renesas,rzg2l-sysc.yaml b/Documentation/devicetree/bindings/soc/renesas/renesas,rzg2l-sysc.yaml index bb433e75a0ee..ce2875c89329 100644 --- a/Documentation/devicetree/bindings/power/renesas,rzg2l-sysc.yaml +++ b/Documentation/devicetree/bindings/soc/renesas/renesas,rzg2l-sysc.yaml @@ -1,7 +1,7 @@ # SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) %YAML 1.2 --- -$id: "http://devicetree.org/schemas/power/renesas,rzg2l-sysc.yaml#" +$id: "http://devicetree.org/schemas/soc/renesas/renesas,rzg2l-sysc.yaml#" $schema: "http://devicetree.org/meta-schemas/core.yaml#" title: Renesas RZ/{G2L,V2L} System Controller (SYSC) @@ -10,8 +10,8 @@ maintainers: - Geert Uytterhoeven <geert+renesas@glider.be> description: - The RZ/{G2L,V2L} System Controller (SYSC) performs system control of the LSI - and supports following functions, + The RZ/{G2L,V2L}-alike System Controller (SYSC) performs system control of + the LSI and supports following functions, - External terminal state capture function - 34-bit address space access function - Low power consumption control @@ -20,6 +20,7 @@ description: properties: compatible: enum: + - renesas,r9a07g043-sysc # RZ/G2UL - renesas,r9a07g044-sysc # RZ/G2{L,LC} - renesas,r9a07g054-sysc # RZ/V2L diff --git a/Documentation/devicetree/bindings/spi/allwinner,sun6i-a31-spi.yaml b/Documentation/devicetree/bindings/spi/allwinner,sun6i-a31-spi.yaml index 908248260afa..ca4c95345a49 100644 --- a/Documentation/devicetree/bindings/spi/allwinner,sun6i-a31-spi.yaml +++ b/Documentation/devicetree/bindings/spi/allwinner,sun6i-a31-spi.yaml @@ -26,6 +26,7 @@ properties: - allwinner,sun8i-r40-spi - allwinner,sun50i-h6-spi - allwinner,sun50i-h616-spi + - allwinner,suniv-f1c100s-spi - const: allwinner,sun8i-h3-spi reg: diff --git a/Documentation/devicetree/bindings/vendor-prefixes.yaml b/Documentation/devicetree/bindings/vendor-prefixes.yaml index 44508b20a4d7..495a01ced97e 100644 --- a/Documentation/devicetree/bindings/vendor-prefixes.yaml +++ b/Documentation/devicetree/bindings/vendor-prefixes.yaml @@ -1201,6 +1201,8 @@ patternProperties: description: StorLink Semiconductors, Inc. "^storm,.*": description: Storm Semiconductor, Inc. + "^storopack,.*": + description: Storopack "^summit,.*": description: Summit microelectronics "^sunchip,.*": diff --git a/Documentation/devicetree/bindings/watchdog/allwinner,sun4i-a10-wdt.yaml b/Documentation/devicetree/bindings/watchdog/allwinner,sun4i-a10-wdt.yaml index 43afa24513b9..cbcf19f51411 100644 --- a/Documentation/devicetree/bindings/watchdog/allwinner,sun4i-a10-wdt.yaml +++ b/Documentation/devicetree/bindings/watchdog/allwinner,sun4i-a10-wdt.yaml @@ -26,10 +26,8 @@ properties: - allwinner,sun50i-h616-wdt - allwinner,sun50i-r329-wdt - allwinner,sun50i-r329-wdt-reset + - allwinner,suniv-f1c100s-wdt - const: allwinner,sun6i-a31-wdt - - items: - - const: allwinner,suniv-f1c100s-wdt - - const: allwinner,sun4i-a10-wdt - const: allwinner,sun20i-d1-wdt - items: - const: allwinner,sun20i-d1-wdt-reset @@ -41,14 +39,8 @@ properties: clocks: minItems: 1 items: - - description: High-frequency oscillator input, divided internally - - description: Low-frequency oscillator input, only found on some variants - - clock-names: - minItems: 1 - items: - - const: hosc - - const: losc + - description: 32 KHz input clock + - description: secondary clock source interrupts: maxItems: 1 @@ -73,9 +65,14 @@ then: properties: clocks: minItems: 2 + items: + - description: High-frequency oscillator input, divided internally + - description: Low-frequency oscillator input clock-names: - minItems: 2 + items: + - const: hosc + - const: losc required: - clock-names @@ -85,9 +82,6 @@ else: clocks: maxItems: 1 - clock-names: - maxItems: 1 - unevaluatedProperties: false examples: diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile index 7c16f8a2b738..edfbedaa6168 100644 --- a/arch/arm/boot/dts/Makefile +++ b/arch/arm/boot/dts/Makefile @@ -103,6 +103,8 @@ dtb-$(CONFIG_ARCH_BCM_5301X) += \ bcm4708-asus-rt-ac56u.dtb \ bcm4708-asus-rt-ac68u.dtb \ bcm4708-buffalo-wzr-1750dhp.dtb \ + bcm4708-buffalo-wzr-1166dhp.dtb \ + bcm4708-buffalo-wzr-1166dhp2.dtb \ bcm4708-linksys-ea6300-v1.dtb \ bcm4708-linksys-ea6500-v2.dtb \ bcm4708-luxul-xap-1510.dtb \ @@ -179,6 +181,8 @@ dtb-$(CONFIG_ARCH_BERLIN) += \ berlin2q-marvell-dmp.dtb dtb-$(CONFIG_ARCH_BRCMSTB) += \ bcm7445-bcm97445svmb.dtb +dtb-$(CONFIG_ARCH_BCMBCA) += \ + bcm947622.dtb dtb-$(CONFIG_ARCH_CLPS711X) += \ ep7211-edb7211.dtb dtb-$(CONFIG_ARCH_DAVINCI) += \ @@ -458,8 +462,10 @@ dtb-$(CONFIG_SOC_IMX6Q) += \ imx6dl-aristainetos_7.dtb \ imx6dl-aristainetos2_4.dtb \ imx6dl-aristainetos2_7.dtb \ + imx6dl-colibri-aster.dtb \ imx6dl-colibri-eval-v3.dtb \ - imx6dl-colibri-v1_1-eval-v3.dtb \ + imx6dl-colibri-iris.dtb \ + imx6dl-colibri-iris-v2.dtb \ imx6dl-cubox-i.dtb \ imx6dl-cubox-i-emmc-som-v15.dtb \ imx6dl-cubox-i-som-v15.dtb \ @@ -547,6 +553,7 @@ dtb-$(CONFIG_SOC_IMX6Q) += \ imx6q-b450v3.dtb \ imx6q-b650v3.dtb \ imx6q-b850v3.dtb \ + imx6q-bosch-acc.dtb \ imx6q-cm-fx6.dtb \ imx6q-cubox-i.dtb \ imx6q-cubox-i-emmc-som-v15.dtb \ @@ -690,6 +697,9 @@ dtb-$(CONFIG_SOC_IMX6UL) += \ imx6ul-kontron-n6310-s.dtb \ imx6ul-kontron-n6310-s-43.dtb \ imx6ul-liteboard.dtb \ + imx6ul-tqma6ul1-mba6ulx.dtb \ + imx6ul-tqma6ul2-mba6ulx.dtb \ + imx6ul-tqma6ul2l-mba6ulx.dtb \ imx6ul-opos6uldev.dtb \ imx6ul-pico-dwarf.dtb \ imx6ul-pico-hobbit.dtb \ @@ -701,15 +711,28 @@ dtb-$(CONFIG_SOC_IMX6UL) += \ imx6ul-tx6ul-0011.dtb \ imx6ul-tx6ul-mainboard.dtb \ imx6ull-14x14-evk.dtb \ + imx6ull-colibri-aster.dtb \ + imx6ull-colibri-emmc-aster.dtb \ imx6ull-colibri-emmc-eval-v3.dtb \ + imx6ull-colibri-emmc-iris.dtb \ + imx6ull-colibri-emmc-iris-v2.dtb \ imx6ull-colibri-eval-v3.dtb \ + imx6ull-colibri-iris.dtb \ + imx6ull-colibri-iris-v2.dtb \ + imx6ull-colibri-wifi-aster.dtb \ imx6ull-colibri-wifi-eval-v3.dtb \ + imx6ull-colibri-wifi-iris.dtb \ + imx6ull-colibri-wifi-iris-v2.dtb \ imx6ull-jozacp.dtb \ imx6ull-myir-mys-6ulx-eval.dtb \ imx6ull-opos6uldev.dtb \ imx6ull-phytec-segin-ff-rdk-nand.dtb \ imx6ull-phytec-segin-ff-rdk-emmc.dtb \ imx6ull-phytec-segin-lc-rdk-nand.dtb \ + imx6ull-phytec-tauri-emmc.dtb \ + imx6ull-phytec-tauri-nand.dtb \ + imx6ull-tqma6ull2-mba6ulx.dtb \ + imx6ull-tqma6ull2l-mba6ulx.dtb \ imx6ulz-14x14-evk.dtb \ imx6ulz-bsh-smm-m2.dtb dtb-$(CONFIG_SOC_IMX7D) += \ @@ -732,6 +755,7 @@ dtb-$(CONFIG_SOC_IMX7D) += \ imx7d-sdb.dtb \ imx7d-sdb-reva.dtb \ imx7d-sdb-sht11.dtb \ + imx7d-smegw01.dtb \ imx7d-zii-rmu2.dtb \ imx7d-zii-rpu2.dtb \ imx7s-colibri-aster.dtb \ @@ -741,9 +765,14 @@ dtb-$(CONFIG_SOC_IMX7D) += \ dtb-$(CONFIG_SOC_IMX7ULP) += \ imx7ulp-com.dtb \ imx7ulp-evk.dtb +dtb-$(CONFIG_SOC_IMXRT) += \ + imxrt1050-evk.dtb dtb-$(CONFIG_SOC_LAN966) += \ - lan966x-pcb8291.dtb + lan966x-pcb8291.dtb \ + lan966x-kontron-kswitch-d10-mmt-6g-2gs.dtb \ + lan966x-kontron-kswitch-d10-mmt-8g.dtb dtb-$(CONFIG_SOC_LS1021A) += \ + ls1021a-iot.dtb \ ls1021a-moxa-uc-8410a.dtb \ ls1021a-qds.dtb \ ls1021a-tsn.dtb \ @@ -977,11 +1006,12 @@ dtb-$(CONFIG_ARCH_OXNAS) += \ ox820-cloudengines-pogoplug-series-3.dtb dtb-$(CONFIG_ARCH_QCOM) += \ qcom-apq8016-sbc.dtb \ + qcom-apq8026-asus-sparrow.dtb \ qcom-apq8026-lg-lenok.dtb \ qcom-apq8060-dragonboard.dtb \ qcom-apq8064-cm-qs600.dtb \ qcom-apq8064-ifc6410.dtb \ - qcom-apq8064-sony-xperia-yuga.dtb \ + qcom-apq8064-sony-xperia-lagan-yuga.dtb \ qcom-apq8064-asus-nexus7-flo.dtb \ qcom-apq8074-dragonboard.dtb \ qcom-apq8084-ifc6540.dtb \ @@ -1000,12 +1030,12 @@ dtb-$(CONFIG_ARCH_QCOM) += \ qcom-msm8660-surf.dtb \ qcom-msm8916-samsung-serranove.dtb \ qcom-msm8960-cdp.dtb \ - qcom-msm8974-fairphone-fp2.dtb \ qcom-msm8974-lge-nexus5-hammerhead.dtb \ - qcom-msm8974-samsung-klte.dtb \ - qcom-msm8974-sony-xperia-amami.dtb \ - qcom-msm8974-sony-xperia-castor.dtb \ - qcom-msm8974-sony-xperia-honami.dtb \ + qcom-msm8974-sony-xperia-rhine-amami.dtb \ + qcom-msm8974-sony-xperia-rhine-honami.dtb \ + qcom-msm8974pro-fairphone-fp2.dtb \ + qcom-msm8974pro-samsung-klte.dtb \ + qcom-msm8974pro-sony-xperia-shinano-castor.dtb \ qcom-mdm9615-wp8548-mangoh-green.dtb \ qcom-sdx55-mtp.dtb \ qcom-sdx55-t55.dtb \ @@ -1156,10 +1186,14 @@ dtb-$(CONFIG_ARCH_STM32) += \ stm32h743i-disco.dtb \ stm32h750i-art-pi.dtb \ stm32mp135f-dk.dtb \ + stm32mp151a-prtt1a.dtb \ + stm32mp151a-prtt1c.dtb \ + stm32mp151a-prtt1s.dtb \ stm32mp153c-dhcom-drc02.dtb \ stm32mp157a-avenger96.dtb \ stm32mp157a-dhcor-avenger96.dtb \ stm32mp157a-dk1.dtb \ + stm32mp157a-dk1-scmi.dtb \ stm32mp157a-iot-box.dtb \ stm32mp157a-microgea-stm32mp1-microdev2.0.dtb \ stm32mp157a-microgea-stm32mp1-microdev2.0-of7.dtb \ @@ -1170,9 +1204,12 @@ dtb-$(CONFIG_ARCH_STM32) += \ stm32mp157c-dhcom-pdk2.dtb \ stm32mp157c-dhcom-picoitx.dtb \ stm32mp157c-dk2.dtb \ + stm32mp157c-dk2-scmi.dtb \ stm32mp157c-ed1.dtb \ + stm32mp157c-ed1-scmi.dtb \ stm32mp157c-emsbc-argon.dtb \ stm32mp157c-ev1.dtb \ + stm32mp157c-ev1-scmi.dtb \ stm32mp157c-lxa-mc1.dtb \ stm32mp157c-odyssey.dtb dtb-$(CONFIG_MACH_SUN4I) += \ @@ -1382,6 +1419,7 @@ dtb-$(CONFIG_ARCH_U8500) += \ ste-ux500-samsung-janice.dtb \ ste-ux500-samsung-gavini.dtb \ ste-ux500-samsung-codina.dtb \ + ste-ux500-samsung-codina-tmo.dtb \ ste-ux500-samsung-skomer.dtb \ ste-ux500-samsung-kyle.dtb dtb-$(CONFIG_ARCH_UNIPHIER) += \ diff --git a/arch/arm/boot/dts/am335x-baltos.dtsi b/arch/arm/boot/dts/am335x-baltos.dtsi index 366702630290..d3eafee79a23 100644 --- a/arch/arm/boot/dts/am335x-baltos.dtsi +++ b/arch/arm/boot/dts/am335x-baltos.dtsi @@ -285,7 +285,7 @@ /* VDD_MPU voltage limits 0.95V - 1.26V with +/-4% tolerance */ regulator-name = "vdd_mpu"; regulator-min-microvolt = <912500>; - regulator-max-microvolt = <1312500>; + regulator-max-microvolt = <1351500>; regulator-boot-on; regulator-always-on; }; diff --git a/arch/arm/boot/dts/am335x-bone-common.dtsi b/arch/arm/boot/dts/am335x-bone-common.dtsi index 56ae5095a5b8..02e04a12a270 100644 --- a/arch/arm/boot/dts/am335x-bone-common.dtsi +++ b/arch/arm/boot/dts/am335x-bone-common.dtsi @@ -405,3 +405,7 @@ &pruss_tm { status = "okay"; }; + +&wkup_m3_ipc { + firmware-name = "am335x-bone-scale-data.bin"; +}; diff --git a/arch/arm/boot/dts/am335x-evm.dts b/arch/arm/boot/dts/am335x-evm.dts index 659e99eabe66..b9745a2f0e4d 100644 --- a/arch/arm/boot/dts/am335x-evm.dts +++ b/arch/arm/boot/dts/am335x-evm.dts @@ -782,3 +782,7 @@ &pruss_tm { status = "okay"; }; + +&wkup_m3_ipc { + firmware-name = "am335x-evm-scale-data.bin"; +}; diff --git a/arch/arm/boot/dts/am335x-evmsk.dts b/arch/arm/boot/dts/am335x-evmsk.dts index a2db65538e51..9c458e5a95b7 100644 --- a/arch/arm/boot/dts/am335x-evmsk.dts +++ b/arch/arm/boot/dts/am335x-evmsk.dts @@ -719,3 +719,7 @@ &pruss_tm { status = "okay"; }; + +&wkup_m3_ipc { + firmware-name = "am335x-evm-scale-data.bin"; +}; diff --git a/arch/arm/boot/dts/am335x-guardian.dts b/arch/arm/boot/dts/am335x-guardian.dts index 1918766c1f80..1a7e187b1953 100644 --- a/arch/arm/boot/dts/am335x-guardian.dts +++ b/arch/arm/boot/dts/am335x-guardian.dts @@ -29,39 +29,44 @@ reg = <0x80000000 0x10000000>; /* 256 MB */ }; - gpio_keys { + guardian_buttons: gpio-keys { + pinctrl-names = "default"; + pinctrl-0 = <&guardian_button_pins>; compatible = "gpio-keys"; #address-cells = <1>; #size-cells = <0>; - pinctrl-names = "default"; - pinctrl-0 = <&gpio_keys_pins>; - button21 { + select-button { + label = "guardian-select-button"; + linux,code = <KEY_5>; + gpios = <&gpio1 31 GPIO_ACTIVE_LOW>; + wakeup-source; + }; + + power-button { label = "guardian-power-button"; linux,code = <KEY_POWER>; - gpios = <&gpio2 21 0>; + gpios = <&gpio2 21 GPIO_ACTIVE_LOW>; wakeup-source; }; }; - leds { - compatible = "gpio-leds"; + guardian_leds: gpio-leds { pinctrl-names = "default"; - pinctrl-0 = <&leds_pins>; + pinctrl-0 = <&guardian_led_pins>; + compatible = "gpio-leds"; - led1 { - label = "green:heartbeat"; - gpios = <&gpio1 27 GPIO_ACTIVE_HIGH>; + life-led { + label = "guardian:life-led"; + gpios = <&gpio1 26 GPIO_ACTIVE_HIGH>; linux,default-trigger = "heartbeat"; default-state = "off"; }; + }; - led2 { - label = "green:mmc0"; - gpios = <&gpio1 26 GPIO_ACTIVE_HIGH>; - linux,default-trigger = "mmc0"; - default-state = "off"; - }; + gpio-poweroff { + compatible = "gpio-poweroff"; + gpios = <&gpio0 1 GPIO_ACTIVE_LOW>; }; panel { @@ -100,20 +105,36 @@ }; - pwm7: dmtimer-pwm { + guardian_beeper: dmtimer-pwm@7 { compatible = "ti,omap-dmtimer-pwm"; ti,timers = <&timer7>; pinctrl-names = "default"; - pinctrl-0 = <&dmtimer7_pins>; + pinctrl-0 = <&guardian_beeper_pins>; ti,clock-source = <0x01>; }; - vmmcsd_fixed: regulator-3v3 { + vmmcsd_fixed: fixedregulator0 { compatible = "regulator-fixed"; regulator-name = "vmmcsd_fixed"; regulator-min-microvolt = <3300000>; regulator-max-microvolt = <3300000>; }; + + mt_keypad: mt_keypad@0 { + compatible = "gpio-mt-keypad"; + debounce-delay-ms = <10>; + col-scan-delay-us = <2>; + keypad,num-lines = <5>; + linux,no-autorepeat; + gpio-activelow; + line-gpios = < + &gpio1 24 GPIO_ACTIVE_LOW /*gpio_56*/ + &gpio1 23 GPIO_ACTIVE_LOW /*gpio_55*/ + &gpio1 22 GPIO_ACTIVE_LOW /*gpio_54*/ + &gpio1 20 GPIO_ACTIVE_LOW /*gpio_52*/ + &gpio1 16 GPIO_ACTIVE_LOW /*gpio_48*/ + >; + }; }; &elm { @@ -133,28 +154,29 @@ interrupts = <0 IRQ_TYPE_NONE>, /* fifoevent */ <1 IRQ_TYPE_NONE>; /* termcount */ rb-gpios = <&gpmc 0 GPIO_ACTIVE_HIGH>; /* gpmc_wait0 */ + ti,nand-xfer-type = "prefetch-dma"; ti,nand-ecc-opt = "bch16"; ti,elm-id = <&elm>; nand-bus-width = <8>; gpmc,device-width = <1>; gpmc,sync-clk-ps = <0>; gpmc,cs-on-ns = <0>; - gpmc,cs-rd-off-ns = <44>; - gpmc,cs-wr-off-ns = <44>; - gpmc,adv-on-ns = <6>; - gpmc,adv-rd-off-ns = <34>; - gpmc,adv-wr-off-ns = <44>; + gpmc,cs-rd-off-ns = <30>; + gpmc,cs-wr-off-ns = <30>; + gpmc,adv-on-ns = <0>; + gpmc,adv-rd-off-ns = <30>; + gpmc,adv-wr-off-ns = <30>; gpmc,we-on-ns = <0>; - gpmc,we-off-ns = <40>; - gpmc,oe-on-ns = <0>; - gpmc,oe-off-ns = <54>; - gpmc,access-ns = <64>; - gpmc,rd-cycle-ns = <82>; - gpmc,wr-cycle-ns = <82>; + gpmc,we-off-ns = <15>; + gpmc,oe-on-ns = <1>; + gpmc,oe-off-ns = <15>; + gpmc,access-ns = <30>; + gpmc,rd-cycle-ns = <30>; + gpmc,wr-cycle-ns = <30>; gpmc,bus-turnaround-ns = <0>; gpmc,cycle2cycle-delay-ns = <0>; gpmc,clk-activation-ns = <0>; - gpmc,wr-access-ns = <40>; + gpmc,wr-access-ns = <0>; gpmc,wr-data-mux-bus-ns = <0>; /* @@ -198,18 +220,33 @@ }; partition@6 { - label = "u-boot-env"; - reg = <0x300000 0x40000>; + label = "u-boot-2"; + reg = <0x300000 0x100000>; }; partition@7 { - label = "u-boot-env.backup1"; - reg = <0x340000 0x40000>; + label = "u-boot-2.backup1"; + reg = <0x400000 0x100000>; }; partition@8 { + label = "u-boot-env"; + reg = <0x500000 0x40000>; + }; + + partition@9 { + label = "u-boot-env.backup1"; + reg = <0x540000 0x40000>; + }; + + partition@10 { + label = "splash-screen"; + reg = <0x580000 0x40000>; + }; + + partition@11 { label = "UBI"; - reg = <0x380000 0x1fc80000>; + reg = <0x5c0000 0x1fa40000>; }; }; }; @@ -228,6 +265,11 @@ &lcdc { blue-and-red-wiring = "crossed"; status = "okay"; + port { + lcdc_0: endpoint@0 { + remote-endpoint = <0>; + }; + }; }; &mmc1 { @@ -242,7 +284,6 @@ &rtc { clocks = <&clk_32768_ck>, <&clk_24mhz_clkctrl AM3_CLK_24MHZ_CLKDIV32K_CLKCTRL 0>; clock-names = "ext-clk", "int-clk"; - system-power-controller; }; &spi0 { @@ -255,14 +296,34 @@ #include "tps65217.dtsi" &tps { + /* + * Configure pmic to enter OFF-state instead of SLEEP-state ("RTC-only + * mode") at poweroff. Most BeagleBone versions do not support RTC-only + * mode and risk hardware damage if this mode is entered. + * + * For details, see linux-omap mailing list May 2015 thread + * [PATCH] ARM: dts: am335x-bone* enable pmic-shutdown-controller + * In particular, messages: + * http://www.spinics.net/lists/linux-omap/msg118585.html + * http://www.spinics.net/lists/linux-omap/msg118615.html + * + * You can override this later with + * &tps { /delete-property/ ti,pmic-shutdown-controller; } + * if you want to use RTC-only mode and made sure you are not affected + * by the hardware problems. (Tip: double-check by performing a current + * measurement after shutdown: it should be less than 1 mA.) + */ ti,pmic-shutdown-controller; interrupt-parent = <&intc>; interrupts = <7>; /* NMI */ backlight { isel = <1>; /* 1 - ISET1, 2 ISET2 */ - fdim = <100>; /* TPS65217_BL_FDIM_100HZ */ - default-brightness = <100>; + fdim = <500>; /* TPS65217_BL_FDIM_500HZ */ + default-brightness = <50>; + /* 1(on) - enable current sink, while initialization */ + /* 0(off) - disable current sink, while initialization */ + isink-en = <1>; }; regulators { @@ -272,6 +333,7 @@ }; dcdc2_reg: regulator@1 { + /* VDD_MPU voltage limits 0.95V - 1.26V with +/-4% tolerance */ regulator-name = "vdd_mpu"; regulator-min-microvolt = <925000>; regulator-max-microvolt = <1351500>; @@ -280,6 +342,7 @@ }; dcdc3_reg: regulator@2 { + /* VDD_CORE voltage limits 0.95V - 1.1V with +/-4% tolerance */ regulator-name = "vdd_core"; regulator-min-microvolt = <925000>; regulator-max-microvolt = <1150000>; @@ -319,171 +382,364 @@ }; }; +&gpio0 { + gpio-line-names = + "", + "", + "", + "", + "", + "", + "", + "", + "", + "", + "", + "", + "", + "", + "", + "", + "", + "", + "", + "", + "", + "", + "", + "", + "", + "", + "", + "", + "", + "MirxWakeup", + "", + ""; +}; + +&gpio3 { + ti,gpio-always-on; + ti,no-reset-on-init; + gpio-line-names = + "", + "MirxBtReset", + "", + "CcVolAdcEn", + "MirxBlePause", + "", + "", + "", + "", + "", + "", + "", + "", + "", + "AspEn", + "", + "", + "", + "", + "", + "", + "BatVolAdcEn", + "", + "", + "", + "", + "", + "", + "", + "", + "", + ""; +}; + &uart0 { pinctrl-names = "default"; pinctrl-0 = <&uart0_pins>; status = "okay"; }; +&uart2 { + pinctrl-names = "default"; + pinctrl-0 = <&uart2_pins>; + status = "okay"; +}; + &usb0 { dr_mode = "peripheral"; }; &usb1 { dr_mode = "host"; + /delete-property/dmas; + /delete-property/dma-names; }; &am33xx_pinmux { pinctrl-names = "default"; - pinctrl-0 = <&clkout2_pin &gpio_pins>; + pinctrl-0 = <&clkout2_pin &guardian_interface_pins>; clkout2_pin: pinmux_clkout2_pin { pinctrl-single,pins = < + /* xdma_event_intr1.clkout2 */ AM33XX_IOPAD(0x9b4, PIN_OUTPUT_PULLDOWN | MUX_MODE3) >; }; - dmtimer7_pins: pinmux_dmtimer7_pins { + guardian_interface_pins: pinmux_interface_pins { pinctrl-single,pins = < - AM33XX_IOPAD(0x968, PIN_OUTPUT | MUX_MODE5) + /* ADC_BATSENSE_EN */ + /* (A14) MCASP0_AHCLKx.gpio3[21] */ + AM33XX_IOPAD(0x9ac, PIN_OUTPUT_PULLDOWN | MUX_MODE7 ) + /* ADC_COINCELL_EN */ + /* (J16) MII1_TX_EN.gpio3[3] */ + AM33XX_IOPAD(0x914, PIN_OUTPUT_PULLDOWN | MUX_MODE7 ) + /* ASP_ENABLE */ + /* (A13) MCASP0_ACLKx.gpio3[14] */ + AM33XX_IOPAD(0x990, PIN_OUTPUT_PULLUP | MUX_MODE7) + /* (D16) uart1_rxd.uart1_rxd */ + AM33XX_IOPAD(0x980, PIN_INPUT | MUX_MODE7) + /* (D15) uart1_txd.uart1_txd */ + AM33XX_IOPAD(0x984, PIN_INPUT | MUX_MODE7) + /*SWITCH-OFF_3V6*/ + /* (M18) gpio0[1] */ + AM33XX_IOPAD(0x94c, PIN_OUTPUT_PULLUP | MUX_MODE7) + /* MIRACULIX */ + /* (H17) gmii1_crs.gpio3[1] */ + AM33XX_IOPAD(0x90c, PIN_OUTPUT_PULLDOWN | MUX_MODE7 ) + /* (H18) rmii1_refclk.gpio0[29] */ + AM33XX_IOPAD(0x944, PIN_OUTPUT_PULLDOWN | MUX_MODE7 ) + /* (J18) gmii1_txd3.gpio0[16] */ + AM33XX_IOPAD(0x91c, PIN_INPUT | MUX_MODE7 ) + /* (J17) gmii1_rxdv.gpio3[4] */ + AM33XX_IOPAD(0x918, PIN_OUTPUT_PULLDOWN | MUX_MODE7 ) >; }; - gpio_keys_pins: pinmux_gpio_keys_pins { + guardian_beeper_pins: pinmux_dmtimer7_pins { pinctrl-single,pins = < - AM33XX_IOPAD(0x940, PIN_INPUT | MUX_MODE7) + AM33XX_IOPAD(0x968, PIN_OUTPUT | MUX_MODE5) /* (E18) timer7 */ >; }; - gpio_pins: pinmux_gpio_pins { + guardian_button_pins: pinmux_guardian_button_pins { pinctrl-single,pins = < - AM33XX_IOPAD(0x928, PIN_OUTPUT | MUX_MODE7) - AM33XX_IOPAD(0x990, PIN_OUTPUT | MUX_MODE7) + AM33XX_IOPAD(0x940, PIN_INPUT | MUX_MODE7) /* (M16) gmii1_rxd0.gpio2[21] */ + AM33XX_IOPAD(0x884, PIN_INPUT | MUX_MODE7) /* (V9) gpmc_csn2.gpio1[31] */ >; }; + i2c0_pins: pinmux_i2c0_pins { pinctrl-single,pins = < - AM33XX_IOPAD(0x988, PIN_INPUT_PULLUP | MUX_MODE0) - AM33XX_IOPAD(0x98c, PIN_INPUT_PULLUP | MUX_MODE0) + AM33XX_IOPAD(0x988, PIN_INPUT_PULLUP | MUX_MODE0) /* i2c0_sda.i2c0_sda */ + AM33XX_IOPAD(0x98c, PIN_INPUT_PULLUP | MUX_MODE0) /* i2c0_scl.i2c0_scl */ + >; + }; + + led_bl_pins: gpio_led_bl_pins { + pinctrl-single,pins = < + /* P9_14, gpmc_a[2].GPIO1[18] (backlight control) */ + AM33XX_IOPAD(0x848, PIN_OUTPUT | MUX_MODE7) >; }; lcd_disen_pins: pinmux_lcd_disen_pins { pinctrl-single,pins = < + /* P9_27, mcasp0_fsr.gpio3[19] (lcd_disen) */ AM33XX_IOPAD(0x9a4, PIN_OUTPUT_PULLUP | SLEWCTRL_SLOW | MUX_MODE7) >; }; lcd_pins_default: pinmux_lcd_pins_default { pinctrl-single,pins = < + /* (U10) gpmc_ad8.lcd_data23 */ AM33XX_IOPAD(0x820, PIN_OUTPUT | SLEWCTRL_SLOW | MUX_MODE1) + /* (T10) gpmc_ad9.lcd_data22 */ AM33XX_IOPAD(0x824, PIN_OUTPUT | SLEWCTRL_SLOW | MUX_MODE1) + /* (T11) gpmc_ad10.lcd_data21 */ AM33XX_IOPAD(0x828, PIN_OUTPUT | SLEWCTRL_SLOW | MUX_MODE1) + /* (U12) gpmc_ad11.lcd_data20 */ AM33XX_IOPAD(0x82c, PIN_OUTPUT | SLEWCTRL_SLOW | MUX_MODE1) + /* (T12) gpmc_ad12.lcd_data19 */ AM33XX_IOPAD(0x830, PIN_OUTPUT | SLEWCTRL_SLOW | MUX_MODE1) + /* (R12) gpmc_ad13.lcd_data18 */ AM33XX_IOPAD(0x834, PIN_OUTPUT | SLEWCTRL_SLOW | MUX_MODE1) + /* (V13) gpmc_ad14.lcd_data17 */ AM33XX_IOPAD(0x838, PIN_OUTPUT | SLEWCTRL_SLOW | MUX_MODE1) + /* (U13) gpmc_ad15.lcd_data16 */ AM33XX_IOPAD(0x83c, PIN_OUTPUT | SLEWCTRL_SLOW | MUX_MODE1) + /* lcd_data0.lcd_data0 */ AM33XX_IOPAD(0x8a0, PIN_OUTPUT | SLEWCTRL_SLOW | MUX_MODE0) + /* lcd_data1.lcd_data1 */ AM33XX_IOPAD(0x8a4, PIN_OUTPUT | SLEWCTRL_SLOW | MUX_MODE0) + /* lcd_data2.lcd_data2 */ AM33XX_IOPAD(0x8a8, PIN_OUTPUT | SLEWCTRL_SLOW | MUX_MODE0) + /* lcd_data3.lcd_data3 */ AM33XX_IOPAD(0x8ac, PIN_OUTPUT | SLEWCTRL_SLOW | MUX_MODE0) + /* lcd_data4.lcd_data4 */ AM33XX_IOPAD(0x8b0, PIN_OUTPUT | SLEWCTRL_SLOW | MUX_MODE0) + /* lcd_data5.lcd_data5 */ AM33XX_IOPAD(0x8b4, PIN_OUTPUT | SLEWCTRL_SLOW | MUX_MODE0) + /* lcd_data6.lcd_data6 */ AM33XX_IOPAD(0x8b8, PIN_OUTPUT | SLEWCTRL_SLOW | MUX_MODE0) + /* lcd_data7.lcd_data7 */ AM33XX_IOPAD(0x8bc, PIN_OUTPUT | SLEWCTRL_SLOW | MUX_MODE0) + /* lcd_data8.lcd_data8 */ AM33XX_IOPAD(0x8c0, PIN_OUTPUT | SLEWCTRL_SLOW | MUX_MODE0) + /* lcd_data9.lcd_data9 */ AM33XX_IOPAD(0x8c4, PIN_OUTPUT | SLEWCTRL_SLOW | MUX_MODE0) + /* lcd_data10.lcd_data10 */ AM33XX_IOPAD(0x8c8, PIN_OUTPUT | SLEWCTRL_SLOW | MUX_MODE0) + /* lcd_data11.lcd_data11 */ AM33XX_IOPAD(0x8cc, PIN_OUTPUT | SLEWCTRL_SLOW | MUX_MODE0) + /* lcd_data12.lcd_data12 */ AM33XX_IOPAD(0x8d0, PIN_OUTPUT | SLEWCTRL_SLOW | MUX_MODE0) + /* lcd_data13.lcd_data13 */ AM33XX_IOPAD(0x8d4, PIN_OUTPUT | SLEWCTRL_SLOW | MUX_MODE0) + /* lcd_data14.lcd_data14 */ AM33XX_IOPAD(0x8d8, PIN_OUTPUT | SLEWCTRL_SLOW | MUX_MODE0) + /* lcd_data15.lcd_data15 */ AM33XX_IOPAD(0x8dc, PIN_OUTPUT | SLEWCTRL_SLOW | MUX_MODE0) + /* lcd_vsync.lcd_vsync */ AM33XX_IOPAD(0x8e0, PIN_OUTPUT | SLEWCTRL_SLOW | MUX_MODE0) + /* lcd_hsync.lcd_hsync */ AM33XX_IOPAD(0x8e4, PIN_OUTPUT | SLEWCTRL_SLOW | MUX_MODE0) + /* lcd_pclk.lcd_pclk */ AM33XX_IOPAD(0x8e8, PIN_OUTPUT | SLEWCTRL_SLOW | MUX_MODE0) + /* lcd_ac_bias_en.lcd_ac_bias_en */ AM33XX_IOPAD(0x8ec, PIN_OUTPUT | SLEWCTRL_SLOW | MUX_MODE0) >; }; lcd_pins_sleep: pinmux_lcd_pins_sleep { pinctrl-single,pins = < + /* lcd_data0.lcd_data0 */ AM33XX_IOPAD(0x8a0, PULL_DISABLE | SLEWCTRL_SLOW | MUX_MODE7) + /* lcd_data1.lcd_data1 */ AM33XX_IOPAD(0x8a4, PULL_DISABLE | SLEWCTRL_SLOW | MUX_MODE7) + /* lcd_data2.lcd_data2 */ AM33XX_IOPAD(0x8a8, PULL_DISABLE | SLEWCTRL_SLOW | MUX_MODE7) + /* lcd_data3.lcd_data3 */ AM33XX_IOPAD(0x8ac, PULL_DISABLE | SLEWCTRL_SLOW | MUX_MODE7) + /* lcd_data4.lcd_data4 */ AM33XX_IOPAD(0x8b0, PULL_DISABLE | SLEWCTRL_SLOW | MUX_MODE7) + /* lcd_data5.lcd_data5 */ AM33XX_IOPAD(0x8b4, PULL_DISABLE | SLEWCTRL_SLOW | MUX_MODE7) + /* lcd_data6.lcd_data6 */ AM33XX_IOPAD(0x8b8, PULL_DISABLE | SLEWCTRL_SLOW | MUX_MODE7) + /* lcd_data7.lcd_data7 */ AM33XX_IOPAD(0x8bc, PULL_DISABLE | SLEWCTRL_SLOW | MUX_MODE7) + /* lcd_data8.lcd_data8 */ AM33XX_IOPAD(0x8c0, PULL_DISABLE | SLEWCTRL_SLOW | MUX_MODE7) + /* lcd_data9.lcd_data9 */ AM33XX_IOPAD(0x8c4, PULL_DISABLE | SLEWCTRL_SLOW | MUX_MODE7) + /* lcd_data10.lcd_data10 */ AM33XX_IOPAD(0x8c8, PULL_DISABLE | SLEWCTRL_SLOW | MUX_MODE7) + /* lcd_data11.lcd_data11 */ AM33XX_IOPAD(0x8cc, PULL_DISABLE | SLEWCTRL_SLOW | MUX_MODE7) + /* lcd_data12.lcd_data12 */ AM33XX_IOPAD(0x8d0, PULL_DISABLE | SLEWCTRL_SLOW | MUX_MODE7) + /* lcd_data13.lcd_data13 */ AM33XX_IOPAD(0x8d4, PULL_DISABLE | SLEWCTRL_SLOW | MUX_MODE7) + /* lcd_data14.lcd_data14 */ AM33XX_IOPAD(0x8d8, PULL_DISABLE | SLEWCTRL_SLOW | MUX_MODE7) + /* lcd_data15.lcd_data15 */ AM33XX_IOPAD(0x8dc, PULL_DISABLE | SLEWCTRL_SLOW | MUX_MODE7) + /* lcd_vsync.lcd_vsync */ AM33XX_IOPAD(0x8e0, PIN_INPUT_PULLDOWN | SLEWCTRL_SLOW | MUX_MODE7) + /* lcd_hsync.lcd_hsync */ AM33XX_IOPAD(0x8e4, PIN_INPUT_PULLDOWN | SLEWCTRL_SLOW | MUX_MODE7) + /* lcd_pclk.lcd_pclk */ AM33XX_IOPAD(0x8e8, PIN_INPUT_PULLDOWN | SLEWCTRL_SLOW | MUX_MODE7) + /* lcd_ac_bias_en.lcd_ac_bias_en */ AM33XX_IOPAD(0x8ec, PIN_INPUT_PULLDOWN | SLEWCTRL_SLOW | MUX_MODE7) >; }; - leds_pins: pinmux_leds_pins { + guardian_led_pins: pinmux_guardian_led_pins { pinctrl-single,pins = < - AM33XX_IOPAD(0x868, PIN_OUTPUT | MUX_MODE7) - AM33XX_IOPAD(0x86c, PIN_OUTPUT | MUX_MODE7) + AM33XX_IOPAD(0x868, PIN_OUTPUT | MUX_MODE7) /* (T16) gpmc_a10.gpio1[26] */ >; }; mmc1_pins: pinmux_mmc1_pins { pinctrl-single,pins = < - AM33XX_IOPAD(0x8f0, PIN_INPUT_PULLUP | MUX_MODE0) - AM33XX_IOPAD(0x8f4, PIN_INPUT_PULLUP | MUX_MODE0) - AM33XX_IOPAD(0x8f8, PIN_INPUT_PULLUP | MUX_MODE0) - AM33XX_IOPAD(0x8fc, PIN_INPUT_PULLUP | MUX_MODE0) - AM33XX_IOPAD(0x900, PIN_INPUT_PULLUP | MUX_MODE0) - AM33XX_IOPAD(0x904, PIN_INPUT_PULLUP | MUX_MODE0) - AM33XX_IOPAD(0x960, PIN_INPUT | MUX_MODE7) + AM33XX_IOPAD(0x8f0, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc0_dat3.mmc0_dat3 */ + AM33XX_IOPAD(0x8f4, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc0_dat2.mmc0_dat2 */ + AM33XX_IOPAD(0x8f8, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc0_dat1.mmc0_dat1 */ + AM33XX_IOPAD(0x8fc, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc0_dat0.mmc0_dat0 */ + AM33XX_IOPAD(0x900, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc0_clk.mmc0_clk */ + AM33XX_IOPAD(0x904, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc0_cmd.mmc0_cmd */ + AM33XX_IOPAD(0x960, PIN_INPUT | MUX_MODE7) /* GPIO0_6 */ >; }; spi0_pins: pinmux_spi0_pins { pinctrl-single,pins = < + /* SPI0_CLK - spi0_clk.spi */ AM33XX_IOPAD(0x950, PIN_OUTPUT_PULLDOWN | MUX_MODE0) + /* SPI0_MOSI - spi0_d0.spi0 */ AM33XX_IOPAD(0x954, PIN_OUTPUT_PULLUP | MUX_MODE0) + /* SPI0_MISO - spi0_d1.spi0 */ AM33XX_IOPAD(0x958, PIN_INPUT_PULLUP | MUX_MODE0) + /* SPI0_CS0 - spi */ AM33XX_IOPAD(0x95c, PIN_OUTPUT_PULLUP | MUX_MODE0) >; }; uart0_pins: pinmux_uart0_pins { pinctrl-single,pins = < + /* uart0_rxd.uart0_rxd */ AM33XX_IOPAD(0x970, PIN_INPUT_PULLUP | MUX_MODE0) + /* uart0_txd.uart0_txd */ AM33XX_IOPAD(0x974, PIN_OUTPUT_PULLDOWN | MUX_MODE0) >; }; + uart2_pins: pinmux_uart2_pins { + pinctrl-single,pins = < + /* K18 uart2_rxd.mirx_txd */ + AM33XX_IOPAD(0x92c, PIN_INPUT_PULLUP | MUX_MODE1) + /* L18 uart2_txd.mirx_rxd */ + AM33XX_IOPAD(0x930, PIN_OUTPUT_PULLDOWN | MUX_MODE1) + >; + }; + nandflash_pins: pinmux_nandflash_pins { pinctrl-single,pins = < + /* (U7) gpmc_ad0.gpmc_ad0 */ AM33XX_IOPAD(0x800, PIN_INPUT | MUX_MODE0) + /* (V7) gpmc_ad1.gpmc_ad1 */ AM33XX_IOPAD(0x804, PIN_INPUT | MUX_MODE0) + /* (R8) gpmc_ad2.gpmc_ad2 */ AM33XX_IOPAD(0x808, PIN_INPUT | MUX_MODE0) + /* (T8) gpmc_ad3.gpmc_ad3 */ AM33XX_IOPAD(0x80c, PIN_INPUT | MUX_MODE0) + /* (U8) gpmc_ad4.gpmc_ad4 */ AM33XX_IOPAD(0x810, PIN_INPUT | MUX_MODE0) + /* (V8) gpmc_ad5.gpmc_ad5 */ AM33XX_IOPAD(0x814, PIN_INPUT | MUX_MODE0) + /* (R9) gpmc_ad6.gpmc_ad6 */ AM33XX_IOPAD(0x818, PIN_INPUT | MUX_MODE0) + /* (T9) gpmc_ad7.gpmc_ad7 */ AM33XX_IOPAD(0x81c, PIN_INPUT | MUX_MODE0) + /* (T17) gpmc_wait0.gpmc_wait0 */ AM33XX_IOPAD(0x870, PIN_INPUT | MUX_MODE0) + /* (U17) gpmc_wpn.gpmc_wpn */ AM33XX_IOPAD(0x874, PIN_OUTPUT | MUX_MODE0) + /* (V6) gpmc_csn0.gpmc_csn0 */ AM33XX_IOPAD(0x87c, PIN_OUTPUT | MUX_MODE0) + /* (R7) gpmc_advn_ale.gpmc_advn_ale */ AM33XX_IOPAD(0x890, PIN_OUTPUT | MUX_MODE0) + /* (T7) gpmc_oen_ren.gpmc_oen_ren */ AM33XX_IOPAD(0x894, PIN_OUTPUT | MUX_MODE0) + /* (U6) gpmc_wen.gpmc_wen */ AM33XX_IOPAD(0x898, PIN_OUTPUT | MUX_MODE0) + /* (T6) gpmc_be0n_cle.gpmc_be0n_cle */ AM33XX_IOPAD(0x89c, PIN_OUTPUT | MUX_MODE0) >; }; diff --git a/arch/arm/boot/dts/am335x-moxa-uc-2100-common.dtsi b/arch/arm/boot/dts/am335x-moxa-uc-2100-common.dtsi index 11e8f64b6606..92a0e98ec231 100644 --- a/arch/arm/boot/dts/am335x-moxa-uc-2100-common.dtsi +++ b/arch/arm/boot/dts/am335x-moxa-uc-2100-common.dtsi @@ -182,7 +182,7 @@ pinctrl-names = "default"; pinctrl-0 = <&spi0_pins>; - m25p80@0 { + flash@0 { compatible = "mx25l6405d"; spi-max-frequency = <40000000>; diff --git a/arch/arm/boot/dts/am335x-moxa-uc-8100-common.dtsi b/arch/arm/boot/dts/am335x-moxa-uc-8100-common.dtsi index a7269b90d795..e7e439a0630a 100644 --- a/arch/arm/boot/dts/am335x-moxa-uc-8100-common.dtsi +++ b/arch/arm/boot/dts/am335x-moxa-uc-8100-common.dtsi @@ -394,7 +394,7 @@ pinctrl-names = "default"; pinctrl-0 = <&spi0_pins>; - m25p80@0 { + flash@0 { compatible = "mx25l6405d"; spi-max-frequency = <40000000>; diff --git a/arch/arm/boot/dts/am335x-myirtech-myc.dtsi b/arch/arm/boot/dts/am335x-myirtech-myc.dtsi index 245c35f41cdf..6eea18b29355 100644 --- a/arch/arm/boot/dts/am335x-myirtech-myc.dtsi +++ b/arch/arm/boot/dts/am335x-myirtech-myc.dtsi @@ -27,6 +27,13 @@ reg = <0x80000000 0x10000000>; }; + clk32k: clk32k { + compatible = "fixed-clock"; + clock-frequency = <32768>; + + #clock-cells = <0>; + }; + vdd_mod: vdd_mod_reg { compatible = "regulator-fixed"; regulator-name = "vdd-mod"; @@ -124,9 +131,6 @@ gpmc,wr-data-mux-bus-ns = <0>; ti,elm-id = <&elm>; ti,nand-ecc-opt = "bch8"; - - #address-cells = <1>; - #size-cells = <1>; }; }; @@ -149,6 +153,8 @@ }; &rtc { + clocks = <&clk32k>; + clock-names = "ext-clk"; system-power-controller; }; diff --git a/arch/arm/boot/dts/am335x-myirtech-myd.dts b/arch/arm/boot/dts/am335x-myirtech-myd.dts index 1479fd95dec2..9d81d4cc6890 100644 --- a/arch/arm/boot/dts/am335x-myirtech-myd.dts +++ b/arch/arm/boot/dts/am335x-myirtech-myd.dts @@ -227,14 +227,20 @@ }; &nand0 { - partition@0 { - label = "MLO"; - reg = <0x00000 0x20000>; - }; + nand_parts: partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; - partition@20000 { - label = "boot"; - reg = <0x20000 0x80000>; + partition@0 { + label = "MLO"; + reg = <0x00000 0x20000>; + }; + + partition@80000 { + label = "boot"; + reg = <0x80000 0x100000>; + }; }; }; diff --git a/arch/arm/boot/dts/am335x-phycore-som.dtsi b/arch/arm/boot/dts/am335x-phycore-som.dtsi index f65cd1331315..e2cec1ffaa4c 100644 --- a/arch/arm/boot/dts/am335x-phycore-som.dtsi +++ b/arch/arm/boot/dts/am335x-phycore-som.dtsi @@ -331,7 +331,7 @@ pinctrl-0 = <&spi0_pins>; status = "okay"; - serial_flash: m25p80@0 { + serial_flash: flash@0 { compatible = "jedec,spi-nor"; spi-max-frequency = <48000000>; reg = <0x0>; diff --git a/arch/arm/boot/dts/am335x-sl50.dts b/arch/arm/boot/dts/am335x-sl50.dts index 6516907ed579..73b5d1a024bd 100644 --- a/arch/arm/boot/dts/am335x-sl50.dts +++ b/arch/arm/boot/dts/am335x-sl50.dts @@ -588,7 +588,7 @@ pinctrl-names = "default"; pinctrl-0 = <&spi0_pins>; - flash: n25q032@1 { + flash: flash@1 { #address-cells = <1>; #size-cells = <1>; compatible = "micron,n25q032"; diff --git a/arch/arm/boot/dts/am33xx-clocks.dtsi b/arch/arm/boot/dts/am33xx-clocks.dtsi index b7b7106f2dee..d34483ae1778 100644 --- a/arch/arm/boot/dts/am33xx-clocks.dtsi +++ b/arch/arm/boot/dts/am33xx-clocks.dtsi @@ -5,251 +5,288 @@ * Copyright (C) 2013 Texas Instruments, Inc. */ &scm_clocks { - sys_clkin_ck: sys_clkin_ck@40 { + sys_clkin_ck: clock-sys-clkin-22@40 { #clock-cells = <0>; compatible = "ti,mux-clock"; + clock-output-names = "sys_clkin_ck"; clocks = <&virt_19200000_ck>, <&virt_24000000_ck>, <&virt_25000000_ck>, <&virt_26000000_ck>; ti,bit-shift = <22>; reg = <0x0040>; }; - adc_tsc_fck: adc_tsc_fck { + adc_tsc_fck: clock-adc-tsc-fck { #clock-cells = <0>; compatible = "fixed-factor-clock"; + clock-output-names = "adc_tsc_fck"; clocks = <&sys_clkin_ck>; clock-mult = <1>; clock-div = <1>; }; - dcan0_fck: dcan0_fck { + dcan0_fck: clock-dcan0-fck { #clock-cells = <0>; compatible = "fixed-factor-clock"; + clock-output-names = "dcan0_fck"; clocks = <&sys_clkin_ck>; clock-mult = <1>; clock-div = <1>; }; - dcan1_fck: dcan1_fck { + dcan1_fck: clock-dcan1-fck { #clock-cells = <0>; compatible = "fixed-factor-clock"; + clock-output-names = "dcan1_fck"; clocks = <&sys_clkin_ck>; clock-mult = <1>; clock-div = <1>; }; - mcasp0_fck: mcasp0_fck { + mcasp0_fck: clock-mcasp0-fck { #clock-cells = <0>; compatible = "fixed-factor-clock"; + clock-output-names = "mcasp0_fck"; clocks = <&sys_clkin_ck>; clock-mult = <1>; clock-div = <1>; }; - mcasp1_fck: mcasp1_fck { + mcasp1_fck: clock-mcasp1-fck { #clock-cells = <0>; compatible = "fixed-factor-clock"; + clock-output-names = "mcasp1_fck"; clocks = <&sys_clkin_ck>; clock-mult = <1>; clock-div = <1>; }; - smartreflex0_fck: smartreflex0_fck { + smartreflex0_fck: clock-smartreflex0-fck { #clock-cells = <0>; compatible = "fixed-factor-clock"; + clock-output-names = "smartreflex0_fck"; clocks = <&sys_clkin_ck>; clock-mult = <1>; clock-div = <1>; }; - smartreflex1_fck: smartreflex1_fck { + smartreflex1_fck: clock-smartreflex1-fck { #clock-cells = <0>; compatible = "fixed-factor-clock"; + clock-output-names = "smartreflex1_fck"; clocks = <&sys_clkin_ck>; clock-mult = <1>; clock-div = <1>; }; - sha0_fck: sha0_fck { + sha0_fck: clock-sha0-fck { #clock-cells = <0>; compatible = "fixed-factor-clock"; + clock-output-names = "sha0_fck"; clocks = <&sys_clkin_ck>; clock-mult = <1>; clock-div = <1>; }; - aes0_fck: aes0_fck { + aes0_fck: clock-aes0-fck { #clock-cells = <0>; compatible = "fixed-factor-clock"; + clock-output-names = "aes0_fck"; clocks = <&sys_clkin_ck>; clock-mult = <1>; clock-div = <1>; }; - rng_fck: rng_fck { + rng_fck: clock-rng-fck { #clock-cells = <0>; compatible = "fixed-factor-clock"; + clock-output-names = "rng_fck"; clocks = <&sys_clkin_ck>; clock-mult = <1>; clock-div = <1>; }; - ehrpwm0_tbclk: ehrpwm0_tbclk@44e10664 { - #clock-cells = <0>; - compatible = "ti,gate-clock"; - clocks = <&l4ls_gclk>; - ti,bit-shift = <0>; - reg = <0x0664>; - }; + clock@664 { + compatible = "ti,clksel"; + reg = <0x664>; + #clock-cells = <2>; + #address-cells = <0>; - ehrpwm1_tbclk: ehrpwm1_tbclk@44e10664 { - #clock-cells = <0>; - compatible = "ti,gate-clock"; - clocks = <&l4ls_gclk>; - ti,bit-shift = <1>; - reg = <0x0664>; - }; + ehrpwm0_tbclk: clock-ehrpwm0-tbclk { + #clock-cells = <0>; + compatible = "ti,gate-clock"; + clock-output-names = "ehrpwm0_tbclk"; + clocks = <&l4ls_gclk>; + ti,bit-shift = <0>; + }; - ehrpwm2_tbclk: ehrpwm2_tbclk@44e10664 { - #clock-cells = <0>; - compatible = "ti,gate-clock"; - clocks = <&l4ls_gclk>; - ti,bit-shift = <2>; - reg = <0x0664>; + ehrpwm1_tbclk: clock-ehrpwm1-tbclk { + #clock-cells = <0>; + compatible = "ti,gate-clock"; + clock-output-names = "ehrpwm1_tbclk"; + clocks = <&l4ls_gclk>; + ti,bit-shift = <1>; + }; + + ehrpwm2_tbclk: clock-ehrpwm2-tbclk { + #clock-cells = <0>; + compatible = "ti,gate-clock"; + clock-output-names = "ehrpwm2_tbclk"; + clocks = <&l4ls_gclk>; + ti,bit-shift = <2>; + }; }; }; &prcm_clocks { - clk_32768_ck: clk_32768_ck { + clk_32768_ck: clock-clk-32768 { #clock-cells = <0>; compatible = "fixed-clock"; + clock-output-names = "clk_32768_ck"; clock-frequency = <32768>; }; - clk_rc32k_ck: clk_rc32k_ck { + clk_rc32k_ck: clock-clk-rc32k { #clock-cells = <0>; compatible = "fixed-clock"; + clock-output-names = "clk_rc32k_ck"; clock-frequency = <32000>; }; - virt_19200000_ck: virt_19200000_ck { + virt_19200000_ck: clock-virt-19200000 { #clock-cells = <0>; compatible = "fixed-clock"; + clock-output-names = "virt_19200000_ck"; clock-frequency = <19200000>; }; - virt_24000000_ck: virt_24000000_ck { + virt_24000000_ck: clock-virt-24000000 { #clock-cells = <0>; compatible = "fixed-clock"; + clock-output-names = "virt_24000000_ck"; clock-frequency = <24000000>; }; - virt_25000000_ck: virt_25000000_ck { + virt_25000000_ck: clock-virt-25000000 { #clock-cells = <0>; compatible = "fixed-clock"; + clock-output-names = "virt_25000000_ck"; clock-frequency = <25000000>; }; - virt_26000000_ck: virt_26000000_ck { + virt_26000000_ck: clock-virt-26000000 { #clock-cells = <0>; compatible = "fixed-clock"; + clock-output-names = "virt_26000000_ck"; clock-frequency = <26000000>; }; - tclkin_ck: tclkin_ck { + tclkin_ck: clock-tclkin { #clock-cells = <0>; compatible = "fixed-clock"; + clock-output-names = "tclkin_ck"; clock-frequency = <12000000>; }; - dpll_core_ck: dpll_core_ck@490 { + dpll_core_ck: clock@490 { #clock-cells = <0>; compatible = "ti,am3-dpll-core-clock"; + clock-output-names = "dpll_core_ck"; clocks = <&sys_clkin_ck>, <&sys_clkin_ck>; reg = <0x0490>, <0x045c>, <0x0468>, <0x0460>, <0x0464>; }; - dpll_core_x2_ck: dpll_core_x2_ck { + dpll_core_x2_ck: clock-dpll-core-x2 { #clock-cells = <0>; compatible = "ti,am3-dpll-x2-clock"; + clock-output-names = "dpll_core_x2_ck"; clocks = <&dpll_core_ck>; }; - dpll_core_m4_ck: dpll_core_m4_ck@480 { + dpll_core_m4_ck: clock-dpll-core-m4@480 { #clock-cells = <0>; compatible = "ti,divider-clock"; + clock-output-names = "dpll_core_m4_ck"; clocks = <&dpll_core_x2_ck>; ti,max-div = <31>; reg = <0x0480>; ti,index-starts-at-one; }; - dpll_core_m5_ck: dpll_core_m5_ck@484 { + dpll_core_m5_ck: clock-dpll-core-m5@484 { #clock-cells = <0>; compatible = "ti,divider-clock"; + clock-output-names = "dpll_core_m5_ck"; clocks = <&dpll_core_x2_ck>; ti,max-div = <31>; reg = <0x0484>; ti,index-starts-at-one; }; - dpll_core_m6_ck: dpll_core_m6_ck@4d8 { + dpll_core_m6_ck: clock-dpll-core-m6@4d8 { #clock-cells = <0>; compatible = "ti,divider-clock"; + clock-output-names = "dpll_core_m6_ck"; clocks = <&dpll_core_x2_ck>; ti,max-div = <31>; reg = <0x04d8>; ti,index-starts-at-one; }; - dpll_mpu_ck: dpll_mpu_ck@488 { + dpll_mpu_ck: clock@488 { #clock-cells = <0>; compatible = "ti,am3-dpll-clock"; + clock-output-names = "dpll_mpu_ck"; clocks = <&sys_clkin_ck>, <&sys_clkin_ck>; reg = <0x0488>, <0x0420>, <0x042c>, <0x0424>, <0x0428>; }; - dpll_mpu_m2_ck: dpll_mpu_m2_ck@4a8 { + dpll_mpu_m2_ck: clock-dpll-mpu-m2@4a8 { #clock-cells = <0>; compatible = "ti,divider-clock"; + clock-output-names = "dpll_mpu_m2_ck"; clocks = <&dpll_mpu_ck>; ti,max-div = <31>; reg = <0x04a8>; ti,index-starts-at-one; }; - dpll_ddr_ck: dpll_ddr_ck@494 { + dpll_ddr_ck: clock@494 { #clock-cells = <0>; compatible = "ti,am3-dpll-no-gate-clock"; + clock-output-names = "dpll_ddr_ck"; clocks = <&sys_clkin_ck>, <&sys_clkin_ck>; reg = <0x0494>, <0x0434>, <0x0440>, <0x0438>, <0x043c>; }; - dpll_ddr_m2_ck: dpll_ddr_m2_ck@4a0 { + dpll_ddr_m2_ck: clock-dpll-ddr-m2@4a0 { #clock-cells = <0>; compatible = "ti,divider-clock"; + clock-output-names = "dpll_ddr_m2_ck"; clocks = <&dpll_ddr_ck>; ti,max-div = <31>; reg = <0x04a0>; ti,index-starts-at-one; }; - dpll_ddr_m2_div2_ck: dpll_ddr_m2_div2_ck { + dpll_ddr_m2_div2_ck: clock-dpll-ddr-m2-div2 { #clock-cells = <0>; compatible = "fixed-factor-clock"; + clock-output-names = "dpll_ddr_m2_div2_ck"; clocks = <&dpll_ddr_m2_ck>; clock-mult = <1>; clock-div = <2>; }; - dpll_disp_ck: dpll_disp_ck@498 { + dpll_disp_ck: clock@498 { #clock-cells = <0>; compatible = "ti,am3-dpll-no-gate-clock"; + clock-output-names = "dpll_disp_ck"; clocks = <&sys_clkin_ck>, <&sys_clkin_ck>; reg = <0x0498>, <0x0448>, <0x0454>, <0x044c>, <0x0450>; }; - dpll_disp_m2_ck: dpll_disp_m2_ck@4a4 { + dpll_disp_m2_ck: clock-dpll-disp-m2@4a4 { #clock-cells = <0>; compatible = "ti,divider-clock"; + clock-output-names = "dpll_disp_m2_ck"; clocks = <&dpll_disp_ck>; ti,max-div = <31>; reg = <0x04a4>; @@ -257,418 +294,484 @@ ti,set-rate-parent; }; - dpll_per_ck: dpll_per_ck@48c { + dpll_per_ck: clock@48c { #clock-cells = <0>; compatible = "ti,am3-dpll-no-gate-j-type-clock"; + clock-output-names = "dpll_per_ck"; clocks = <&sys_clkin_ck>, <&sys_clkin_ck>; reg = <0x048c>, <0x0470>, <0x049c>, <0x0474>, <0x0478>; }; - dpll_per_m2_ck: dpll_per_m2_ck@4ac { + dpll_per_m2_ck: clock-dpll-per-m2@4ac { #clock-cells = <0>; compatible = "ti,divider-clock"; + clock-output-names = "dpll_per_m2_ck"; clocks = <&dpll_per_ck>; ti,max-div = <31>; reg = <0x04ac>; ti,index-starts-at-one; }; - dpll_per_m2_div4_wkupdm_ck: dpll_per_m2_div4_wkupdm_ck { + dpll_per_m2_div4_wkupdm_ck: clock-dpll-per-m2-div4-wkupdm { #clock-cells = <0>; compatible = "fixed-factor-clock"; + clock-output-names = "dpll_per_m2_div4_wkupdm_ck"; clocks = <&dpll_per_m2_ck>; clock-mult = <1>; clock-div = <4>; }; - dpll_per_m2_div4_ck: dpll_per_m2_div4_ck { + dpll_per_m2_div4_ck: clock-dpll-per-m2-div4 { #clock-cells = <0>; compatible = "fixed-factor-clock"; + clock-output-names = "dpll_per_m2_div4_ck"; clocks = <&dpll_per_m2_ck>; clock-mult = <1>; clock-div = <4>; }; - clk_24mhz: clk_24mhz { + clk_24mhz: clock-clk-24mhz { #clock-cells = <0>; compatible = "fixed-factor-clock"; + clock-output-names = "clk_24mhz"; clocks = <&dpll_per_m2_ck>; clock-mult = <1>; clock-div = <8>; }; - clkdiv32k_ck: clkdiv32k_ck { + clkdiv32k_ck: clock-clkdiv32k { #clock-cells = <0>; compatible = "fixed-factor-clock"; + clock-output-names = "clkdiv32k_ck"; clocks = <&clk_24mhz>; clock-mult = <1>; clock-div = <732>; }; - l3_gclk: l3_gclk { + l3_gclk: clock-l3-gclk { #clock-cells = <0>; compatible = "fixed-factor-clock"; + clock-output-names = "l3_gclk"; clocks = <&dpll_core_m4_ck>; clock-mult = <1>; clock-div = <1>; }; - pruss_ocp_gclk: pruss_ocp_gclk@530 { + pruss_ocp_gclk: clock-pruss-ocp-gclk@530 { #clock-cells = <0>; compatible = "ti,mux-clock"; + clock-output-names = "pruss_ocp_gclk"; clocks = <&l3_gclk>, <&dpll_disp_m2_ck>; reg = <0x0530>; }; - mmu_fck: mmu_fck@914 { + mmu_fck: clock-mmu-fck-1@914 { #clock-cells = <0>; compatible = "ti,gate-clock"; + clock-output-names = "mmu_fck"; clocks = <&dpll_core_m4_ck>; ti,bit-shift = <1>; reg = <0x0914>; }; - timer1_fck: timer1_fck@528 { + timer1_fck: clock-timer1-fck@528 { #clock-cells = <0>; compatible = "ti,mux-clock"; + clock-output-names = "timer1_fck"; clocks = <&sys_clkin_ck>, <&clk_24mhz_clkctrl AM3_CLK_24MHZ_CLKDIV32K_CLKCTRL 0>, <&tclkin_ck>, <&clk_rc32k_ck>, <&clk_32768_ck>; reg = <0x0528>; }; - timer2_fck: timer2_fck@508 { + timer2_fck: clock-timer2-fck@508 { #clock-cells = <0>; compatible = "ti,mux-clock"; + clock-output-names = "timer2_fck"; clocks = <&tclkin_ck>, <&sys_clkin_ck>, <&clk_24mhz_clkctrl AM3_CLK_24MHZ_CLKDIV32K_CLKCTRL 0>; reg = <0x0508>; }; - timer3_fck: timer3_fck@50c { + timer3_fck: clock-timer3-fck@50c { #clock-cells = <0>; compatible = "ti,mux-clock"; + clock-output-names = "timer3_fck"; clocks = <&tclkin_ck>, <&sys_clkin_ck>, <&clk_24mhz_clkctrl AM3_CLK_24MHZ_CLKDIV32K_CLKCTRL 0>; reg = <0x050c>; }; - timer4_fck: timer4_fck@510 { + timer4_fck: clock-timer4-fck@510 { #clock-cells = <0>; compatible = "ti,mux-clock"; + clock-output-names = "timer4_fck"; clocks = <&tclkin_ck>, <&sys_clkin_ck>, <&clk_24mhz_clkctrl AM3_CLK_24MHZ_CLKDIV32K_CLKCTRL 0>; reg = <0x0510>; }; - timer5_fck: timer5_fck@518 { + timer5_fck: clock-timer5-fck@518 { #clock-cells = <0>; compatible = "ti,mux-clock"; + clock-output-names = "timer5_fck"; clocks = <&tclkin_ck>, <&sys_clkin_ck>, <&clk_24mhz_clkctrl AM3_CLK_24MHZ_CLKDIV32K_CLKCTRL 0>; reg = <0x0518>; }; - timer6_fck: timer6_fck@51c { + timer6_fck: clock-timer6-fck@51c { #clock-cells = <0>; compatible = "ti,mux-clock"; + clock-output-names = "timer6_fck"; clocks = <&tclkin_ck>, <&sys_clkin_ck>, <&clk_24mhz_clkctrl AM3_CLK_24MHZ_CLKDIV32K_CLKCTRL 0>; reg = <0x051c>; }; - timer7_fck: timer7_fck@504 { + timer7_fck: clock-timer7-fck@504 { #clock-cells = <0>; compatible = "ti,mux-clock"; + clock-output-names = "timer7_fck"; clocks = <&tclkin_ck>, <&sys_clkin_ck>, <&clk_24mhz_clkctrl AM3_CLK_24MHZ_CLKDIV32K_CLKCTRL 0>; reg = <0x0504>; }; - usbotg_fck: usbotg_fck@47c { + usbotg_fck: clock-usbotg-fck-8@47c { #clock-cells = <0>; compatible = "ti,gate-clock"; + clock-output-names = "usbotg_fck"; clocks = <&dpll_per_ck>; ti,bit-shift = <8>; reg = <0x047c>; }; - dpll_core_m4_div2_ck: dpll_core_m4_div2_ck { + dpll_core_m4_div2_ck: clock-dpll-core-m4-div2 { #clock-cells = <0>; compatible = "fixed-factor-clock"; + clock-output-names = "dpll_core_m4_div2_ck"; clocks = <&dpll_core_m4_ck>; clock-mult = <1>; clock-div = <2>; }; - ieee5000_fck: ieee5000_fck@e4 { + ieee5000_fck: clock-ieee5000-fck-1@e4 { #clock-cells = <0>; compatible = "ti,gate-clock"; + clock-output-names = "ieee5000_fck"; clocks = <&dpll_core_m4_div2_ck>; ti,bit-shift = <1>; reg = <0x00e4>; }; - wdt1_fck: wdt1_fck@538 { + wdt1_fck: clock-wdt1-fck@538 { #clock-cells = <0>; compatible = "ti,mux-clock"; + clock-output-names = "wdt1_fck"; clocks = <&clk_rc32k_ck>, <&clk_24mhz_clkctrl AM3_CLK_24MHZ_CLKDIV32K_CLKCTRL 0>; reg = <0x0538>; }; - l4_rtc_gclk: l4_rtc_gclk { + l4_rtc_gclk: clock-l4-rtc-gclk { #clock-cells = <0>; compatible = "fixed-factor-clock"; + clock-output-names = "l4_rtc_gclk"; clocks = <&dpll_core_m4_ck>; clock-mult = <1>; clock-div = <2>; }; - l4hs_gclk: l4hs_gclk { + l4hs_gclk: clock-l4hs-gclk { #clock-cells = <0>; compatible = "fixed-factor-clock"; + clock-output-names = "l4hs_gclk"; clocks = <&dpll_core_m4_ck>; clock-mult = <1>; clock-div = <1>; }; - l3s_gclk: l3s_gclk { + l3s_gclk: clock-l3s-gclk { #clock-cells = <0>; compatible = "fixed-factor-clock"; + clock-output-names = "l3s_gclk"; clocks = <&dpll_core_m4_div2_ck>; clock-mult = <1>; clock-div = <1>; }; - l4fw_gclk: l4fw_gclk { + l4fw_gclk: clock-l4fw-gclk { #clock-cells = <0>; compatible = "fixed-factor-clock"; + clock-output-names = "l4fw_gclk"; clocks = <&dpll_core_m4_div2_ck>; clock-mult = <1>; clock-div = <1>; }; - l4ls_gclk: l4ls_gclk { + l4ls_gclk: clock-l4ls-gclk { #clock-cells = <0>; compatible = "fixed-factor-clock"; + clock-output-names = "l4ls_gclk"; clocks = <&dpll_core_m4_div2_ck>; clock-mult = <1>; clock-div = <1>; }; - sysclk_div_ck: sysclk_div_ck { + sysclk_div_ck: clock-sysclk-div { #clock-cells = <0>; compatible = "fixed-factor-clock"; + clock-output-names = "sysclk_div_ck"; clocks = <&dpll_core_m4_ck>; clock-mult = <1>; clock-div = <1>; }; - cpsw_125mhz_gclk: cpsw_125mhz_gclk { + cpsw_125mhz_gclk: clock-cpsw-125mhz-gclk { #clock-cells = <0>; compatible = "fixed-factor-clock"; + clock-output-names = "cpsw_125mhz_gclk"; clocks = <&dpll_core_m5_ck>; clock-mult = <1>; clock-div = <2>; }; - cpsw_cpts_rft_clk: cpsw_cpts_rft_clk@520 { + cpsw_cpts_rft_clk: clock-cpsw-cpts-rft@520 { #clock-cells = <0>; compatible = "ti,mux-clock"; + clock-output-names = "cpsw_cpts_rft_clk"; clocks = <&dpll_core_m5_ck>, <&dpll_core_m4_ck>; reg = <0x0520>; }; - gpio0_dbclk_mux_ck: gpio0_dbclk_mux_ck@53c { + gpio0_dbclk_mux_ck: clock-gpio0-dbclk-mux@53c { #clock-cells = <0>; compatible = "ti,mux-clock"; + clock-output-names = "gpio0_dbclk_mux_ck"; clocks = <&clk_rc32k_ck>, <&clk_32768_ck>, <&clk_24mhz_clkctrl AM3_CLK_24MHZ_CLKDIV32K_CLKCTRL 0>; reg = <0x053c>; }; - lcd_gclk: lcd_gclk@534 { + lcd_gclk: clock-lcd-gclk@534 { #clock-cells = <0>; compatible = "ti,mux-clock"; + clock-output-names = "lcd_gclk"; clocks = <&dpll_disp_m2_ck>, <&dpll_core_m5_ck>, <&dpll_per_m2_ck>; reg = <0x0534>; ti,set-rate-parent; }; - mmc_clk: mmc_clk { + mmc_clk: clock-mmc { #clock-cells = <0>; compatible = "fixed-factor-clock"; + clock-output-names = "mmc_clk"; clocks = <&dpll_per_m2_ck>; clock-mult = <1>; clock-div = <2>; }; - gfx_fclk_clksel_ck: gfx_fclk_clksel_ck@52c { - #clock-cells = <0>; - compatible = "ti,mux-clock"; - clocks = <&dpll_core_m4_ck>, <&dpll_per_m2_ck>; - ti,bit-shift = <1>; - reg = <0x052c>; - }; + clock@52c { + compatible = "ti,clksel"; + reg = <0x52c>; + #clock-cells = <2>; + #address-cells = <0>; - gfx_fck_div_ck: gfx_fck_div_ck@52c { - #clock-cells = <0>; - compatible = "ti,divider-clock"; - clocks = <&gfx_fclk_clksel_ck>; - reg = <0x052c>; - ti,max-div = <2>; - }; + gfx_fclk_clksel_ck: clock-gfx-fclk-clksel { + #clock-cells = <0>; + compatible = "ti,mux-clock"; + clock-output-names = "gfx_fclk_clksel_ck"; + clocks = <&dpll_core_m4_ck>, <&dpll_per_m2_ck>; + ti,bit-shift = <1>; + }; - sysclkout_pre_ck: sysclkout_pre_ck@700 { - #clock-cells = <0>; - compatible = "ti,mux-clock"; - clocks = <&clk_32768_ck>, <&l3_gclk>, <&dpll_ddr_m2_ck>, <&dpll_per_m2_ck>, <&lcd_gclk>; - reg = <0x0700>; + gfx_fck_div_ck: clock-gfx-fck-div { + #clock-cells = <0>; + compatible = "ti,divider-clock"; + clock-output-names = "gfx_fck_div_ck"; + clocks = <&gfx_fclk_clksel_ck>; + ti,max-div = <2>; + }; }; - clkout2_div_ck: clkout2_div_ck@700 { - #clock-cells = <0>; - compatible = "ti,divider-clock"; - clocks = <&sysclkout_pre_ck>; - ti,bit-shift = <3>; - ti,max-div = <8>; - reg = <0x0700>; - }; + clock@700 { + compatible = "ti,clksel"; + reg = <0x700>; + #clock-cells = <2>; + #address-cells = <0>; - clkout2_ck: clkout2_ck@700 { - #clock-cells = <0>; - compatible = "ti,gate-clock"; - clocks = <&clkout2_div_ck>; - ti,bit-shift = <7>; - reg = <0x0700>; + sysclkout_pre_ck: clock-sysclkout-pre { + #clock-cells = <0>; + compatible = "ti,mux-clock"; + clock-output-names = "sysclkout_pre_ck"; + clocks = <&clk_32768_ck>, <&l3_gclk>, <&dpll_ddr_m2_ck>, <&dpll_per_m2_ck>, <&lcd_gclk>; + }; + + clkout2_div_ck: clock-clkout2-div { + #clock-cells = <0>; + compatible = "ti,divider-clock"; + clock-output-names = "clkout2_div_ck"; + clocks = <&sysclkout_pre_ck>; + ti,bit-shift = <3>; + ti,max-div = <8>; + }; + + clkout2_ck: clock-clkout2 { + #clock-cells = <0>; + compatible = "ti,gate-clock"; + clock-output-names = "clkout2_ck"; + clocks = <&clkout2_div_ck>; + ti,bit-shift = <7>; + }; }; }; &prcm { - per_cm: per-cm@0 { + per_cm: clock@0 { compatible = "ti,omap4-cm"; + clock-output-names = "per_cm"; reg = <0x0 0x400>; #address-cells = <1>; #size-cells = <1>; ranges = <0 0x0 0x400>; - l4ls_clkctrl: l4ls-clkctrl@38 { + l4ls_clkctrl: clock@38 { compatible = "ti,clkctrl"; + clock-output-names = "l4ls_clkctrl"; reg = <0x38 0x2c>, <0x6c 0x28>, <0xac 0xc>, <0xc0 0x1c>, <0xec 0xc>, <0x10c 0x8>, <0x130 0x4>; #clock-cells = <2>; }; - l3s_clkctrl: l3s-clkctrl@1c { + l3s_clkctrl: clock@1c { compatible = "ti,clkctrl"; + clock-output-names = "l3s_clkctrl"; reg = <0x1c 0x4>, <0x30 0x8>, <0x68 0x4>, <0xf8 0x4>; #clock-cells = <2>; }; - l3_clkctrl: l3-clkctrl@24 { + l3_clkctrl: clock@24 { compatible = "ti,clkctrl"; + clock-output-names = "l3_clkctrl"; reg = <0x24 0xc>, <0x94 0x10>, <0xbc 0x4>, <0xdc 0x8>, <0xfc 0x8>; #clock-cells = <2>; }; - l4hs_clkctrl: l4hs-clkctrl@120 { + l4hs_clkctrl: clock@120 { compatible = "ti,clkctrl"; + clock-output-names = "l4hs_clkctrl"; reg = <0x120 0x4>; #clock-cells = <2>; }; - pruss_ocp_clkctrl: pruss-ocp-clkctrl@e8 { + pruss_ocp_clkctrl: clock@e8 { compatible = "ti,clkctrl"; + clock-output-names = "pruss_ocp_clkctrl"; reg = <0xe8 0x4>; #clock-cells = <2>; }; - cpsw_125mhz_clkctrl: cpsw-125mhz-clkctrl@0 { + cpsw_125mhz_clkctrl: clock@0 { compatible = "ti,clkctrl"; + clock-output-names = "cpsw_125mhz_clkctrl"; reg = <0x0 0x18>; #clock-cells = <2>; }; - lcdc_clkctrl: lcdc-clkctrl@18 { + lcdc_clkctrl: clock@18 { compatible = "ti,clkctrl"; + clock-output-names = "lcdc_clkctrl"; reg = <0x18 0x4>; #clock-cells = <2>; }; - clk_24mhz_clkctrl: clk-24mhz-clkctrl@14c { + clk_24mhz_clkctrl: clock@14c { compatible = "ti,clkctrl"; + clock-output-names = "clk_24mhz_clkctrl"; reg = <0x14c 0x4>; #clock-cells = <2>; }; }; - wkup_cm: wkup-cm@400 { + wkup_cm: clock@400 { compatible = "ti,omap4-cm"; + clock-output-names = "wkup_cm"; reg = <0x400 0x100>; #address-cells = <1>; #size-cells = <1>; ranges = <0 0x400 0x100>; - l4_wkup_clkctrl: l4-wkup-clkctrl@0 { + l4_wkup_clkctrl: clock@0 { compatible = "ti,clkctrl"; + clock-output-names = "l4_wkup_clkctrl"; reg = <0x0 0x10>, <0xb4 0x24>; #clock-cells = <2>; }; - l3_aon_clkctrl: l3-aon-clkctrl@14 { + l3_aon_clkctrl: clock@14 { compatible = "ti,clkctrl"; + clock-output-names = "l3_aon_clkctrl"; reg = <0x14 0x4>; #clock-cells = <2>; }; - l4_wkup_aon_clkctrl: l4-wkup-aon-clkctrl@b0 { + l4_wkup_aon_clkctrl: clock@b0 { compatible = "ti,clkctrl"; + clock-output-names = "l4_wkup_aon_clkctrl"; reg = <0xb0 0x4>; #clock-cells = <2>; }; }; - mpu_cm: mpu-cm@600 { + mpu_cm: clock@600 { compatible = "ti,omap4-cm"; + clock-output-names = "mpu_cm"; reg = <0x600 0x100>; #address-cells = <1>; #size-cells = <1>; ranges = <0 0x600 0x100>; - mpu_clkctrl: mpu-clkctrl@0 { + mpu_clkctrl: clock@0 { compatible = "ti,clkctrl"; + clock-output-names = "mpu_clkctrl"; reg = <0x0 0x8>; #clock-cells = <2>; }; }; - l4_rtc_cm: l4-rtc-cm@800 { + l4_rtc_cm: clock@800 { compatible = "ti,omap4-cm"; + clock-output-names = "l4_rtc_cm"; reg = <0x800 0x100>; #address-cells = <1>; #size-cells = <1>; ranges = <0 0x800 0x100>; - l4_rtc_clkctrl: l4-rtc-clkctrl@0 { + l4_rtc_clkctrl: clock@0 { compatible = "ti,clkctrl"; + clock-output-names = "l4_rtc_clkctrl"; reg = <0x0 0x4>; #clock-cells = <2>; }; }; - gfx_l3_cm: gfx-l3-cm@900 { + gfx_l3_cm: clock@900 { compatible = "ti,omap4-cm"; + clock-output-names = "gfx_l3_cm"; reg = <0x900 0x100>; #address-cells = <1>; #size-cells = <1>; ranges = <0 0x900 0x100>; - gfx_l3_clkctrl: gfx-l3-clkctrl@0 { + gfx_l3_clkctrl: clock@0 { compatible = "ti,clkctrl"; + clock-output-names = "gfx_l3_clkctrl"; reg = <0x0 0x8>; #clock-cells = <2>; }; }; - l4_cefuse_cm: l4-cefuse-cm@a00 { + l4_cefuse_cm: clock@a00 { compatible = "ti,omap4-cm"; + clock-output-names = "l4_cefuse_cm"; reg = <0xa00 0x100>; #address-cells = <1>; #size-cells = <1>; ranges = <0 0xa00 0x100>; - l4_cefuse_clkctrl: l4-cefuse-clkctrl@0 { + l4_cefuse_clkctrl: clock@0 { compatible = "ti,clkctrl"; + clock-output-names = "l4_cefuse_clkctrl"; reg = <0x0 0x24>; #clock-cells = <2>; }; diff --git a/arch/arm/boot/dts/am33xx.dtsi b/arch/arm/boot/dts/am33xx.dtsi index f6ec85d58dd1..9a8698bd2852 100644 --- a/arch/arm/boot/dts/am33xx.dtsi +++ b/arch/arm/boot/dts/am33xx.dtsi @@ -461,8 +461,11 @@ interrupts = <17>; interrupt-names = "glue"; #dma-cells = <2>; + /* For backwards compatibility: */ #dma-channels = <30>; + dma-channels = <30>; #dma-requests = <256>; + dma-requests = <256>; }; }; diff --git a/arch/arm/boot/dts/am35xx-clocks.dtsi b/arch/arm/boot/dts/am35xx-clocks.dtsi index 220d0a52797e..0ee7afaa0e8e 100644 --- a/arch/arm/boot/dts/am35xx-clocks.dtsi +++ b/arch/arm/boot/dts/am35xx-clocks.dtsi @@ -62,12 +62,27 @@ }; }; &cm_clocks { - ipss_ick: ipss_ick@a10 { - #clock-cells = <0>; - compatible = "ti,am35xx-interface-clock"; - clocks = <&core_l3_ick>; - reg = <0x0a10>; - ti,bit-shift = <4>; + clock@a10 { + compatible = "ti,clksel"; + reg = <0xa10>; + #clock-cells = <2>; + #address-cells = <0>; + + ipss_ick: clock-ipss-ick { + #clock-cells = <0>; + compatible = "ti,am35xx-interface-clock"; + clock-output-names = "ipss_ick"; + clocks = <&core_l3_ick>; + ti,bit-shift = <4>; + }; + + uart4_ick_am35xx: clock-uart4-ick-am35xx { + #clock-cells = <0>; + compatible = "ti,omap3-interface-clock"; + clock-output-names = "uart4_ick_am35xx"; + clocks = <&core_l4_ick>; + ti,bit-shift = <23>; + }; }; rmii_ck: rmii_ck { @@ -82,20 +97,19 @@ clock-frequency = <27000000>; }; - uart4_ick_am35xx: uart4_ick_am35xx@a10 { - #clock-cells = <0>; - compatible = "ti,omap3-interface-clock"; - clocks = <&core_l4_ick>; - reg = <0x0a10>; - ti,bit-shift = <23>; - }; + clock@a00 { + compatible = "ti,clksel"; + reg = <0xa00>; + #clock-cells = <2>; + #address-cells = <0>; - uart4_fck_am35xx: uart4_fck_am35xx@a00 { - #clock-cells = <0>; - compatible = "ti,wait-gate-clock"; - clocks = <&core_48m_fck>; - reg = <0x0a00>; - ti,bit-shift = <23>; + uart4_fck_am35xx: clock-uart4-fck-am35xx { + #clock-cells = <0>; + compatible = "ti,wait-gate-clock"; + clock-output-names = "uart4_fck_am35xx"; + clocks = <&core_48m_fck>; + ti,bit-shift = <23>; + }; }; }; diff --git a/arch/arm/boot/dts/am3874-iceboard.dts b/arch/arm/boot/dts/am3874-iceboard.dts index 9423e9feaa10..c9323d1df303 100644 --- a/arch/arm/boot/dts/am3874-iceboard.dts +++ b/arch/arm/boot/dts/am3874-iceboard.dts @@ -434,7 +434,7 @@ }; &mcspi1 { - s25fl256@0 { + flash@0 { #address-cells = <1>; #size-cells = <1>; compatible = "jedec,spi-nor"; diff --git a/arch/arm/boot/dts/am437x-cm-t43.dts b/arch/arm/boot/dts/am437x-cm-t43.dts index 3e3354780db8..0861e868b75a 100644 --- a/arch/arm/boot/dts/am437x-cm-t43.dts +++ b/arch/arm/boot/dts/am437x-cm-t43.dts @@ -302,7 +302,7 @@ &edma 17 0>; dma-names = "tx0", "rx0"; - flash: w25q64cvzpig@0 { + flash: flash@0 { #address-cells = <1>; #size-cells = <1>; compatible = "jedec,spi-nor"; diff --git a/arch/arm/boot/dts/am437x-gp-evm.dts b/arch/arm/boot/dts/am437x-gp-evm.dts index 4416ddb559e4..46d5361fe876 100644 --- a/arch/arm/boot/dts/am437x-gp-evm.dts +++ b/arch/arm/boot/dts/am437x-gp-evm.dts @@ -1127,6 +1127,11 @@ cpu0-supply = <&dcdc2>; }; +&wkup_m3_ipc { + ti,set-io-isolation; + firmware-name = "am43x-evm-scale-data.bin"; +}; + &pruss1_mdio { status = "disabled"; }; diff --git a/arch/arm/boot/dts/am437x-idk-evm.dts b/arch/arm/boot/dts/am437x-idk-evm.dts index 53f64e3ce735..5a74b83145cf 100644 --- a/arch/arm/boot/dts/am437x-idk-evm.dts +++ b/arch/arm/boot/dts/am437x-idk-evm.dts @@ -437,7 +437,7 @@ pinctrl-1 = <&qspi_pins_sleep>; spi-max-frequency = <48000000>; - m25p80@0 { + flash@0 { compatible = "mx66l51235l"; spi-max-frequency = <48000000>; reg = <0>; diff --git a/arch/arm/boot/dts/am437x-sk-evm.dts b/arch/arm/boot/dts/am437x-sk-evm.dts index 20a34d2d85df..036f3831dc26 100644 --- a/arch/arm/boot/dts/am437x-sk-evm.dts +++ b/arch/arm/boot/dts/am437x-sk-evm.dts @@ -746,7 +746,7 @@ pinctrl-0 = <&qspi_pins>; spi-max-frequency = <48000000>; - m25p80@0 { + flash@0 { compatible = "mx66l51235l"; spi-max-frequency = <48000000>; reg = <0>; @@ -893,6 +893,10 @@ }; }; +&wkup_m3_ipc { + firmware-name = "am43x-evm-scale-data.bin"; +}; + &pruss1_mdio { status = "disabled"; }; diff --git a/arch/arm/boot/dts/am43x-epos-evm.dts b/arch/arm/boot/dts/am43x-epos-evm.dts index 4f9a7251a107..27f4ce855549 100644 --- a/arch/arm/boot/dts/am43x-epos-evm.dts +++ b/arch/arm/boot/dts/am43x-epos-evm.dts @@ -902,7 +902,7 @@ pinctrl-1 = <&qspi1_pins_sleep>; spi-max-frequency = <48000000>; - m25p80@0 { + flash@0 { compatible = "mx66l51235l"; spi-max-frequency = <48000000>; reg = <0>; @@ -1019,6 +1019,10 @@ cpu0-supply = <&dcdc2>; }; +&wkup_m3_ipc { + firmware-name = "am43x-evm-scale-data.bin"; +}; + &pruss1_mdio { status = "disabled"; }; diff --git a/arch/arm/boot/dts/am43xx-clocks.dtsi b/arch/arm/boot/dts/am43xx-clocks.dtsi index 66e892fa3398..9a5437b3d6a8 100644 --- a/arch/arm/boot/dts/am43xx-clocks.dtsi +++ b/arch/arm/boot/dts/am43xx-clocks.dtsi @@ -5,217 +5,246 @@ * Copyright (C) 2013 Texas Instruments, Inc. */ &scm_clocks { - sys_clkin_ck: sys_clkin_ck@40 { + sys_clkin_ck: clock-sys-clkin-31@40 { #clock-cells = <0>; compatible = "ti,mux-clock"; + clock-output-names = "sys_clkin_ck"; clocks = <&sysboot_freq_sel_ck>, <&crystal_freq_sel_ck>; ti,bit-shift = <31>; reg = <0x0040>; }; - crystal_freq_sel_ck: crystal_freq_sel_ck@40 { + crystal_freq_sel_ck: clock-crystal-freq-sel-29@40 { #clock-cells = <0>; compatible = "ti,mux-clock"; + clock-output-names = "crystal_freq_sel_ck"; clocks = <&virt_19200000_ck>, <&virt_24000000_ck>, <&virt_25000000_ck>, <&virt_26000000_ck>; ti,bit-shift = <29>; reg = <0x0040>; }; - sysboot_freq_sel_ck: sysboot_freq_sel_ck@44e10040 { + sysboot_freq_sel_ck: clock-sysboot-freq-sel-22@44e10040 { #clock-cells = <0>; compatible = "ti,mux-clock"; + clock-output-names = "sysboot_freq_sel_ck"; clocks = <&virt_19200000_ck>, <&virt_24000000_ck>, <&virt_25000000_ck>, <&virt_26000000_ck>; ti,bit-shift = <22>; reg = <0x0040>; }; - adc_tsc_fck: adc_tsc_fck { + adc_tsc_fck: clock-adc-tsc-fck { #clock-cells = <0>; compatible = "fixed-factor-clock"; + clock-output-names = "adc_tsc_fck"; clocks = <&sys_clkin_ck>; clock-mult = <1>; clock-div = <1>; }; - dcan0_fck: dcan0_fck { + dcan0_fck: clock-dcan0-fck { #clock-cells = <0>; compatible = "fixed-factor-clock"; + clock-output-names = "dcan0_fck"; clocks = <&sys_clkin_ck>; clock-mult = <1>; clock-div = <1>; }; - dcan1_fck: dcan1_fck { + dcan1_fck: clock-dcan1-fck { #clock-cells = <0>; compatible = "fixed-factor-clock"; + clock-output-names = "dcan1_fck"; clocks = <&sys_clkin_ck>; clock-mult = <1>; clock-div = <1>; }; - mcasp0_fck: mcasp0_fck { + mcasp0_fck: clock-mcasp0-fck { #clock-cells = <0>; compatible = "fixed-factor-clock"; + clock-output-names = "mcasp0_fck"; clocks = <&sys_clkin_ck>; clock-mult = <1>; clock-div = <1>; }; - mcasp1_fck: mcasp1_fck { + mcasp1_fck: clock-mcasp1-fck { #clock-cells = <0>; compatible = "fixed-factor-clock"; + clock-output-names = "mcasp1_fck"; clocks = <&sys_clkin_ck>; clock-mult = <1>; clock-div = <1>; }; - smartreflex0_fck: smartreflex0_fck { + smartreflex0_fck: clock-smartreflex0-fck { #clock-cells = <0>; compatible = "fixed-factor-clock"; + clock-output-names = "smartreflex0_fck"; clocks = <&sys_clkin_ck>; clock-mult = <1>; clock-div = <1>; }; - smartreflex1_fck: smartreflex1_fck { + smartreflex1_fck: clock-smartreflex1-fck { #clock-cells = <0>; compatible = "fixed-factor-clock"; + clock-output-names = "smartreflex1_fck"; clocks = <&sys_clkin_ck>; clock-mult = <1>; clock-div = <1>; }; - sha0_fck: sha0_fck { + sha0_fck: clock-sha0-fck { #clock-cells = <0>; compatible = "fixed-factor-clock"; + clock-output-names = "sha0_fck"; clocks = <&sys_clkin_ck>; clock-mult = <1>; clock-div = <1>; }; - aes0_fck: aes0_fck { + aes0_fck: clock-aes0-fck { #clock-cells = <0>; compatible = "fixed-factor-clock"; + clock-output-names = "aes0_fck"; clocks = <&sys_clkin_ck>; clock-mult = <1>; clock-div = <1>; }; - rng_fck: rng_fck { + rng_fck: clock-rng-fck { #clock-cells = <0>; compatible = "fixed-factor-clock"; + clock-output-names = "rng_fck"; clocks = <&sys_clkin_ck>; clock-mult = <1>; clock-div = <1>; }; - ehrpwm0_tbclk: ehrpwm0_tbclk@664 { + ehrpwm0_tbclk: clock-ehrpwm0-tbclk-0@664 { #clock-cells = <0>; compatible = "ti,gate-clock"; + clock-output-names = "ehrpwm0_tbclk"; clocks = <&l4ls_gclk>; ti,bit-shift = <0>; reg = <0x0664>; }; - ehrpwm1_tbclk: ehrpwm1_tbclk@664 { + ehrpwm1_tbclk: clock-ehrpwm1-tbclk-1@664 { #clock-cells = <0>; compatible = "ti,gate-clock"; + clock-output-names = "ehrpwm1_tbclk"; clocks = <&l4ls_gclk>; ti,bit-shift = <1>; reg = <0x0664>; }; - ehrpwm2_tbclk: ehrpwm2_tbclk@664 { + ehrpwm2_tbclk: clock-ehrpwm2-tbclk-2@664 { #clock-cells = <0>; compatible = "ti,gate-clock"; + clock-output-names = "ehrpwm2_tbclk"; clocks = <&l4ls_gclk>; ti,bit-shift = <2>; reg = <0x0664>; }; - ehrpwm3_tbclk: ehrpwm3_tbclk@664 { + ehrpwm3_tbclk: clock-ehrpwm3-tbclk-4@664 { #clock-cells = <0>; compatible = "ti,gate-clock"; + clock-output-names = "ehrpwm3_tbclk"; clocks = <&l4ls_gclk>; ti,bit-shift = <4>; reg = <0x0664>; }; - ehrpwm4_tbclk: ehrpwm4_tbclk@664 { + ehrpwm4_tbclk: clock-ehrpwm4-tbclk-5@664 { #clock-cells = <0>; compatible = "ti,gate-clock"; + clock-output-names = "ehrpwm4_tbclk"; clocks = <&l4ls_gclk>; ti,bit-shift = <5>; reg = <0x0664>; }; - ehrpwm5_tbclk: ehrpwm5_tbclk@664 { + ehrpwm5_tbclk: clock-ehrpwm5-tbclk-6@664 { #clock-cells = <0>; compatible = "ti,gate-clock"; + clock-output-names = "ehrpwm5_tbclk"; clocks = <&l4ls_gclk>; ti,bit-shift = <6>; reg = <0x0664>; }; }; &prcm_clocks { - clk_32768_ck: clk_32768_ck { + clk_32768_ck: clock-clk-32768 { #clock-cells = <0>; compatible = "fixed-clock"; + clock-output-names = "clk_32768_ck"; clock-frequency = <32768>; }; - clk_rc32k_ck: clk_rc32k_ck { + clk_rc32k_ck: clock-clk-rc32k { #clock-cells = <0>; compatible = "fixed-clock"; + clock-output-names = "clk_rc32k_ck"; clock-frequency = <32768>; }; - virt_19200000_ck: virt_19200000_ck { + virt_19200000_ck: clock-virt-19200000 { #clock-cells = <0>; compatible = "fixed-clock"; + clock-output-names = "virt_19200000_ck"; clock-frequency = <19200000>; }; - virt_24000000_ck: virt_24000000_ck { + virt_24000000_ck: clock-virt-24000000 { #clock-cells = <0>; compatible = "fixed-clock"; + clock-output-names = "virt_24000000_ck"; clock-frequency = <24000000>; }; - virt_25000000_ck: virt_25000000_ck { + virt_25000000_ck: clock-virt-25000000 { #clock-cells = <0>; compatible = "fixed-clock"; + clock-output-names = "virt_25000000_ck"; clock-frequency = <25000000>; }; - virt_26000000_ck: virt_26000000_ck { + virt_26000000_ck: clock-virt-26000000 { #clock-cells = <0>; compatible = "fixed-clock"; + clock-output-names = "virt_26000000_ck"; clock-frequency = <26000000>; }; - tclkin_ck: tclkin_ck { + tclkin_ck: clock-tclkin { #clock-cells = <0>; compatible = "fixed-clock"; + clock-output-names = "tclkin_ck"; clock-frequency = <26000000>; }; - dpll_core_ck: dpll_core_ck@2d20 { + dpll_core_ck: clock@2d20 { #clock-cells = <0>; compatible = "ti,am3-dpll-core-clock"; + clock-output-names = "dpll_core_ck"; clocks = <&sys_clkin_ck>, <&sys_clkin_ck>; reg = <0x2d20>, <0x2d24>, <0x2d2c>, <0x2d48>, <0x2d4c>; }; - dpll_core_x2_ck: dpll_core_x2_ck { + dpll_core_x2_ck: clock-dpll-core-x2 { #clock-cells = <0>; compatible = "ti,am3-dpll-x2-clock"; + clock-output-names = "dpll_core_x2_ck"; clocks = <&dpll_core_ck>; }; - dpll_core_m4_ck: dpll_core_m4_ck@2d38 { + dpll_core_m4_ck: clock-dpll-core-m4-8@2d38 { #clock-cells = <0>; compatible = "ti,divider-clock"; + clock-output-names = "dpll_core_m4_ck"; clocks = <&dpll_core_x2_ck>; ti,max-div = <31>; ti,autoidle-shift = <8>; @@ -224,9 +253,10 @@ ti,invert-autoidle-bit; }; - dpll_core_m5_ck: dpll_core_m5_ck@2d3c { + dpll_core_m5_ck: clock-dpll-core-m5-8@2d3c { #clock-cells = <0>; compatible = "ti,divider-clock"; + clock-output-names = "dpll_core_m5_ck"; clocks = <&dpll_core_x2_ck>; ti,max-div = <31>; ti,autoidle-shift = <8>; @@ -235,9 +265,10 @@ ti,invert-autoidle-bit; }; - dpll_core_m6_ck: dpll_core_m6_ck@2d40 { + dpll_core_m6_ck: clock-dpll-core-m6-8@2d40 { #clock-cells = <0>; compatible = "ti,divider-clock"; + clock-output-names = "dpll_core_m6_ck"; clocks = <&dpll_core_x2_ck>; ti,max-div = <31>; ti,autoidle-shift = <8>; @@ -246,16 +277,18 @@ ti,invert-autoidle-bit; }; - dpll_mpu_ck: dpll_mpu_ck@2d60 { + dpll_mpu_ck: clock@2d60 { #clock-cells = <0>; compatible = "ti,am3-dpll-clock"; + clock-output-names = "dpll_mpu_ck"; clocks = <&sys_clkin_ck>, <&sys_clkin_ck>; reg = <0x2d60>, <0x2d64>, <0x2d6c>, <0x2d88>, <0x2d8c>; }; - dpll_mpu_m2_ck: dpll_mpu_m2_ck@2d70 { + dpll_mpu_m2_ck: clock-dpll-mpu-m2-8@2d70 { #clock-cells = <0>; compatible = "ti,divider-clock"; + clock-output-names = "dpll_mpu_m2_ck"; clocks = <&dpll_mpu_ck>; ti,max-div = <31>; ti,autoidle-shift = <8>; @@ -264,24 +297,27 @@ ti,invert-autoidle-bit; }; - mpu_periphclk: mpu_periphclk { + mpu_periphclk: clock-mpu-periphclk { #clock-cells = <0>; compatible = "fixed-factor-clock"; + clock-output-names = "mpu_periphclk"; clocks = <&dpll_mpu_m2_ck>; clock-mult = <1>; clock-div = <2>; }; - dpll_ddr_ck: dpll_ddr_ck@2da0 { + dpll_ddr_ck: clock@2da0 { #clock-cells = <0>; compatible = "ti,am3-dpll-clock"; + clock-output-names = "dpll_ddr_ck"; clocks = <&sys_clkin_ck>, <&sys_clkin_ck>; reg = <0x2da0>, <0x2da4>, <0x2dac>, <0x2dc8>, <0x2dcc>; }; - dpll_ddr_m2_ck: dpll_ddr_m2_ck@2db0 { + dpll_ddr_m2_ck: clock-dpll-ddr-m2-8@2db0 { #clock-cells = <0>; compatible = "ti,divider-clock"; + clock-output-names = "dpll_ddr_m2_ck"; clocks = <&dpll_ddr_ck>; ti,max-div = <31>; ti,autoidle-shift = <8>; @@ -290,16 +326,18 @@ ti,invert-autoidle-bit; }; - dpll_disp_ck: dpll_disp_ck@2e20 { + dpll_disp_ck: clock@2e20 { #clock-cells = <0>; compatible = "ti,am3-dpll-clock"; + clock-output-names = "dpll_disp_ck"; clocks = <&sys_clkin_ck>, <&sys_clkin_ck>; reg = <0x2e20>, <0x2e24>, <0x2e2c>, <0x2e48>, <0x2e4c>; }; - dpll_disp_m2_ck: dpll_disp_m2_ck@2e30 { + dpll_disp_m2_ck: clock-dpll-disp-m2-8@2e30 { #clock-cells = <0>; compatible = "ti,divider-clock"; + clock-output-names = "dpll_disp_m2_ck"; clocks = <&dpll_disp_ck>; ti,max-div = <31>; ti,autoidle-shift = <8>; @@ -309,16 +347,18 @@ ti,set-rate-parent; }; - dpll_per_ck: dpll_per_ck@2de0 { + dpll_per_ck: clock@2de0 { #clock-cells = <0>; compatible = "ti,am3-dpll-j-type-clock"; + clock-output-names = "dpll_per_ck"; clocks = <&sys_clkin_ck>, <&sys_clkin_ck>; reg = <0x2de0>, <0x2de4>, <0x2dec>, <0x2e08>, <0x2e0c>; }; - dpll_per_m2_ck: dpll_per_m2_ck@2df0 { + dpll_per_m2_ck: clock-dpll-per-m2-8@2df0 { #clock-cells = <0>; compatible = "ti,divider-clock"; + clock-output-names = "dpll_per_m2_ck"; clocks = <&dpll_per_ck>; ti,max-div = <127>; ti,autoidle-shift = <8>; @@ -327,119 +367,135 @@ ti,invert-autoidle-bit; }; - dpll_per_m2_div4_wkupdm_ck: dpll_per_m2_div4_wkupdm_ck { + dpll_per_m2_div4_wkupdm_ck: clock-dpll-per-m2-div4-wkupdm { #clock-cells = <0>; compatible = "fixed-factor-clock"; + clock-output-names = "dpll_per_m2_div4_wkupdm_ck"; clocks = <&dpll_per_m2_ck>; clock-mult = <1>; clock-div = <4>; }; - dpll_per_m2_div4_ck: dpll_per_m2_div4_ck { + dpll_per_m2_div4_ck: clock-dpll-per-m2-div4 { #clock-cells = <0>; compatible = "fixed-factor-clock"; + clock-output-names = "dpll_per_m2_div4_ck"; clocks = <&dpll_per_m2_ck>; clock-mult = <1>; clock-div = <4>; }; - clk_24mhz: clk_24mhz { + clk_24mhz: clock-clk-24mhz { #clock-cells = <0>; compatible = "fixed-factor-clock"; + clock-output-names = "clk_24mhz"; clocks = <&dpll_per_m2_ck>; clock-mult = <1>; clock-div = <8>; }; - clkdiv32k_ck: clkdiv32k_ck { + clkdiv32k_ck: clock-clkdiv32k { #clock-cells = <0>; compatible = "fixed-factor-clock"; + clock-output-names = "clkdiv32k_ck"; clocks = <&clk_24mhz>; clock-mult = <1>; clock-div = <732>; }; - clkdiv32k_ick: clkdiv32k_ick@2a38 { + clkdiv32k_ick: clock-clkdiv32k-ick-8@2a38 { #clock-cells = <0>; compatible = "ti,gate-clock"; + clock-output-names = "clkdiv32k_ick"; clocks = <&clkdiv32k_ck>; ti,bit-shift = <8>; reg = <0x2a38>; }; - sysclk_div: sysclk_div { + sysclk_div: clock-sysclk-div { #clock-cells = <0>; compatible = "fixed-factor-clock"; + clock-output-names = "sysclk_div"; clocks = <&dpll_core_m4_ck>; clock-mult = <1>; clock-div = <1>; }; - pruss_ocp_gclk: pruss_ocp_gclk@4248 { + pruss_ocp_gclk: clock-pruss-ocp-gclk@4248 { #clock-cells = <0>; compatible = "ti,mux-clock"; + clock-output-names = "pruss_ocp_gclk"; clocks = <&sysclk_div>, <&dpll_disp_m2_ck>; reg = <0x4248>; }; - clk_32k_tpm_ck: clk_32k_tpm_ck { + clk_32k_tpm_ck: clock-clk-32k-tpm { #clock-cells = <0>; compatible = "fixed-clock"; + clock-output-names = "clk_32k_tpm_ck"; clock-frequency = <32768>; }; - timer1_fck: timer1_fck@4200 { + timer1_fck: clock-timer1-fck@4200 { #clock-cells = <0>; compatible = "ti,mux-clock"; + clock-output-names = "timer1_fck"; clocks = <&sys_clkin_ck>, <&clkdiv32k_ick>, <&tclkin_ck>, <&clk_rc32k_ck>, <&clk_32768_ck>, <&clk_32k_tpm_ck>; reg = <0x4200>; }; - timer2_fck: timer2_fck@4204 { + timer2_fck: clock-timer2-fck@4204 { #clock-cells = <0>; compatible = "ti,mux-clock"; + clock-output-names = "timer2_fck"; clocks = <&tclkin_ck>, <&sys_clkin_ck>, <&clkdiv32k_ick>; reg = <0x4204>; }; - timer3_fck: timer3_fck@4208 { + timer3_fck: clock-timer3-fck@4208 { #clock-cells = <0>; compatible = "ti,mux-clock"; + clock-output-names = "timer3_fck"; clocks = <&tclkin_ck>, <&sys_clkin_ck>, <&clkdiv32k_ick>; reg = <0x4208>; }; - timer4_fck: timer4_fck@420c { + timer4_fck: clock-timer4-fck@420c { #clock-cells = <0>; compatible = "ti,mux-clock"; + clock-output-names = "timer4_fck"; clocks = <&tclkin_ck>, <&sys_clkin_ck>, <&clkdiv32k_ick>; reg = <0x420c>; }; - timer5_fck: timer5_fck@4210 { + timer5_fck: clock-timer5-fck@4210 { #clock-cells = <0>; compatible = "ti,mux-clock"; + clock-output-names = "timer5_fck"; clocks = <&tclkin_ck>, <&sys_clkin_ck>, <&clkdiv32k_ick>; reg = <0x4210>; }; - timer6_fck: timer6_fck@4214 { + timer6_fck: clock-timer6-fck@4214 { #clock-cells = <0>; compatible = "ti,mux-clock"; + clock-output-names = "timer6_fck"; clocks = <&tclkin_ck>, <&sys_clkin_ck>, <&clkdiv32k_ick>; reg = <0x4214>; }; - timer7_fck: timer7_fck@4218 { + timer7_fck: clock-timer7-fck@4218 { #clock-cells = <0>; compatible = "ti,mux-clock"; + clock-output-names = "timer7_fck"; clocks = <&tclkin_ck>, <&sys_clkin_ck>, <&clkdiv32k_ick>; reg = <0x4218>; }; - wdt1_fck: wdt1_fck@422c { + wdt1_fck: clock-wdt1-fck@422c { #clock-cells = <0>; compatible = "ti,mux-clock"; + clock-output-names = "wdt1_fck"; clocks = <&clk_rc32k_ck>, <&clkdiv32k_ick>; reg = <0x422c>; }; @@ -451,125 +507,141 @@ reg = <0x424c>; }; - l3_gclk: l3_gclk { + l3_gclk: clock-l3-gclk { #clock-cells = <0>; compatible = "fixed-factor-clock"; + clock-output-names = "l3_gclk"; clocks = <&dpll_core_m4_ck>; clock-mult = <1>; clock-div = <1>; }; - dpll_core_m4_div2_ck: dpll_core_m4_div2_ck { + dpll_core_m4_div2_ck: clock-dpll-core-m4-div2 { #clock-cells = <0>; compatible = "fixed-factor-clock"; + clock-output-names = "dpll_core_m4_div2_ck"; clocks = <&sysclk_div>; clock-mult = <1>; clock-div = <2>; }; - l4hs_gclk: l4hs_gclk { + l4hs_gclk: clock-l4hs-gclk { #clock-cells = <0>; compatible = "fixed-factor-clock"; + clock-output-names = "l4hs_gclk"; clocks = <&dpll_core_m4_ck>; clock-mult = <1>; clock-div = <1>; }; - l3s_gclk: l3s_gclk { + l3s_gclk: clock-l3s-gclk { #clock-cells = <0>; compatible = "fixed-factor-clock"; + clock-output-names = "l3s_gclk"; clocks = <&dpll_core_m4_div2_ck>; clock-mult = <1>; clock-div = <1>; }; - l4ls_gclk: l4ls_gclk { + l4ls_gclk: clock-l4ls-gclk { #clock-cells = <0>; compatible = "fixed-factor-clock"; + clock-output-names = "l4ls_gclk"; clocks = <&dpll_core_m4_div2_ck>; clock-mult = <1>; clock-div = <1>; }; - cpsw_125mhz_gclk: cpsw_125mhz_gclk { + cpsw_125mhz_gclk: clock-cpsw-125mhz-gclk { #clock-cells = <0>; compatible = "fixed-factor-clock"; + clock-output-names = "cpsw_125mhz_gclk"; clocks = <&dpll_core_m5_ck>; clock-mult = <1>; clock-div = <2>; }; - cpsw_cpts_rft_clk: cpsw_cpts_rft_clk@4238 { + cpsw_cpts_rft_clk: clock-cpsw-cpts-rft@4238 { #clock-cells = <0>; compatible = "ti,mux-clock"; + clock-output-names = "cpsw_cpts_rft_clk"; clocks = <&sysclk_div>, <&dpll_core_m5_ck>, <&dpll_disp_m2_ck>; reg = <0x4238>; }; - dpll_clksel_mac_clk: dpll_clksel_mac_clk@4234 { + dpll_clksel_mac_clk: clock-dpll-clksel-mac-2@4234 { #clock-cells = <0>; compatible = "ti,divider-clock"; + clock-output-names = "dpll_clksel_mac_clk"; clocks = <&dpll_core_m5_ck>; reg = <0x4234>; ti,bit-shift = <2>; ti,dividers = <2>, <5>; }; - clk_32k_mosc_ck: clk_32k_mosc_ck { + clk_32k_mosc_ck: clock-clk-32k-mosc { #clock-cells = <0>; compatible = "fixed-clock"; + clock-output-names = "clk_32k_mosc_ck"; clock-frequency = <32768>; }; - gpio0_dbclk_mux_ck: gpio0_dbclk_mux_ck@4240 { + gpio0_dbclk_mux_ck: clock-gpio0-dbclk-mux@4240 { #clock-cells = <0>; compatible = "ti,mux-clock"; + clock-output-names = "gpio0_dbclk_mux_ck"; clocks = <&clk_rc32k_ck>, <&clk_32768_ck>, <&clkdiv32k_ick>, <&clk_32k_mosc_ck>, <&clk_32k_tpm_ck>; reg = <0x4240>; }; - mmc_clk: mmc_clk { + mmc_clk: clock-mmc { #clock-cells = <0>; compatible = "fixed-factor-clock"; + clock-output-names = "mmc_clk"; clocks = <&dpll_per_m2_ck>; clock-mult = <1>; clock-div = <2>; }; - gfx_fclk_clksel_ck: gfx_fclk_clksel_ck@423c { + gfx_fclk_clksel_ck: clock-gfx-fclk-clksel-1@423c { #clock-cells = <0>; compatible = "ti,mux-clock"; + clock-output-names = "gfx_fclk_clksel_ck"; clocks = <&sysclk_div>, <&dpll_per_m2_ck>; ti,bit-shift = <1>; reg = <0x423c>; }; - gfx_fck_div_ck: gfx_fck_div_ck@423c { + gfx_fck_div_ck: clock-gfx-fck-div@423c { #clock-cells = <0>; compatible = "ti,divider-clock"; + clock-output-names = "gfx_fck_div_ck"; clocks = <&gfx_fclk_clksel_ck>; reg = <0x423c>; ti,max-div = <2>; }; - disp_clk: disp_clk@4244 { + disp_clk: clock-disp@4244 { #clock-cells = <0>; compatible = "ti,mux-clock"; + clock-output-names = "disp_clk"; clocks = <&dpll_disp_m2_ck>, <&dpll_core_m5_ck>, <&dpll_per_m2_ck>; reg = <0x4244>; ti,set-rate-parent; }; - dpll_extdev_ck: dpll_extdev_ck@2e60 { + dpll_extdev_ck: clock@2e60 { #clock-cells = <0>; compatible = "ti,am3-dpll-clock"; + clock-output-names = "dpll_extdev_ck"; clocks = <&sys_clkin_ck>, <&sys_clkin_ck>; reg = <0x2e60>, <0x2e64>, <0x2e6c>, <0x2e88>, <0x2e8c>; }; - dpll_extdev_m2_ck: dpll_extdev_m2_ck@2e70 { + dpll_extdev_m2_ck: clock-dpll-extdev-m2-8@2e70 { #clock-cells = <0>; compatible = "ti,divider-clock"; + clock-output-names = "dpll_extdev_m2_ck"; clocks = <&dpll_extdev_ck>; ti,max-div = <127>; ti,autoidle-shift = <8>; @@ -578,66 +650,75 @@ ti,invert-autoidle-bit; }; - mux_synctimer32k_ck: mux_synctimer32k_ck@4230 { + mux_synctimer32k_ck: clock-mux-synctimer32k@4230 { #clock-cells = <0>; compatible = "ti,mux-clock"; + clock-output-names = "mux_synctimer32k_ck"; clocks = <&clk_32768_ck>, <&clk_32k_tpm_ck>, <&clkdiv32k_ick>; reg = <0x4230>; }; - timer8_fck: timer8_fck@421c { + timer8_fck: clock-timer8-fck@421c { #clock-cells = <0>; compatible = "ti,mux-clock"; + clock-output-names = "timer8_fck"; clocks = <&tclkin_ck>, <&sys_clkin_ck>, <&clkdiv32k_ick>, <&clk_32k_tpm_ck>; reg = <0x421c>; }; - timer9_fck: timer9_fck@4220 { + timer9_fck: clock-timer9-fck@4220 { #clock-cells = <0>; compatible = "ti,mux-clock"; + clock-output-names = "timer9_fck"; clocks = <&tclkin_ck>, <&sys_clkin_ck>, <&clkdiv32k_ick>, <&clk_32k_tpm_ck>; reg = <0x4220>; }; - timer10_fck: timer10_fck@4224 { + timer10_fck: clock-timer10-fck@4224 { #clock-cells = <0>; compatible = "ti,mux-clock"; + clock-output-names = "timer10_fck"; clocks = <&tclkin_ck>, <&sys_clkin_ck>, <&clkdiv32k_ick>, <&clk_32k_tpm_ck>; reg = <0x4224>; }; - timer11_fck: timer11_fck@4228 { + timer11_fck: clock-timer11-fck@4228 { #clock-cells = <0>; compatible = "ti,mux-clock"; + clock-output-names = "timer11_fck"; clocks = <&tclkin_ck>, <&sys_clkin_ck>, <&clkdiv32k_ick>, <&clk_32k_tpm_ck>; reg = <0x4228>; }; - cpsw_50m_clkdiv: cpsw_50m_clkdiv { + cpsw_50m_clkdiv: clock-cpsw-50m-clkdiv { #clock-cells = <0>; compatible = "fixed-factor-clock"; + clock-output-names = "cpsw_50m_clkdiv"; clocks = <&dpll_core_m5_ck>; clock-mult = <1>; clock-div = <1>; }; - cpsw_5m_clkdiv: cpsw_5m_clkdiv { + cpsw_5m_clkdiv: clock-cpsw-5m-clkdiv { #clock-cells = <0>; compatible = "fixed-factor-clock"; + clock-output-names = "cpsw_5m_clkdiv"; clocks = <&cpsw_50m_clkdiv>; clock-mult = <1>; clock-div = <10>; }; - dpll_ddr_x2_ck: dpll_ddr_x2_ck { + dpll_ddr_x2_ck: clock-dpll-ddr-x2 { #clock-cells = <0>; compatible = "ti,am3-dpll-x2-clock"; + clock-output-names = "dpll_ddr_x2_ck"; clocks = <&dpll_ddr_ck>; }; - dpll_ddr_m4_ck: dpll_ddr_m4_ck@2db8 { + dpll_ddr_m4_ck: clock-dpll-ddr-m4-8@2db8 { #clock-cells = <0>; compatible = "ti,divider-clock"; + clock-output-names = "dpll_ddr_m4_ck"; clocks = <&dpll_ddr_x2_ck>; ti,max-div = <31>; ti,autoidle-shift = <8>; @@ -646,9 +727,10 @@ ti,invert-autoidle-bit; }; - dpll_per_clkdcoldo: dpll_per_clkdcoldo@2e14 { + dpll_per_clkdcoldo: clock-dpll-per-clkdcoldo-8@2e14 { #clock-cells = <0>; compatible = "ti,fixed-factor-clock"; + clock-output-names = "dpll_per_clkdcoldo"; clocks = <&dpll_per_ck>; ti,clock-mult = <1>; ti,clock-div = <1>; @@ -657,91 +739,102 @@ ti,invert-autoidle-bit; }; - dll_aging_clk_div: dll_aging_clk_div@4250 { + dll_aging_clk_div: clock-dll-aging-clk-div@4250 { #clock-cells = <0>; compatible = "ti,divider-clock"; + clock-output-names = "dll_aging_clk_div"; clocks = <&sys_clkin_ck>; reg = <0x4250>; ti,dividers = <8>, <16>, <32>; }; - div_core_25m_ck: div_core_25m_ck { + div_core_25m_ck: clock-div-core-25m { #clock-cells = <0>; compatible = "fixed-factor-clock"; + clock-output-names = "div_core_25m_ck"; clocks = <&sysclk_div>; clock-mult = <1>; clock-div = <8>; }; - func_12m_clk: func_12m_clk { + func_12m_clk: clock-func-12m { #clock-cells = <0>; compatible = "fixed-factor-clock"; + clock-output-names = "func_12m_clk"; clocks = <&dpll_per_m2_ck>; clock-mult = <1>; clock-div = <16>; }; - vtp_clk_div: vtp_clk_div { + vtp_clk_div: clock-vtp-clk-div { #clock-cells = <0>; compatible = "fixed-factor-clock"; + clock-output-names = "vtp_clk_div"; clocks = <&sys_clkin_ck>; clock-mult = <1>; clock-div = <2>; }; - usbphy_32khz_clkmux: usbphy_32khz_clkmux@4260 { + usbphy_32khz_clkmux: clock-usbphy-32khz-clkmux@4260 { #clock-cells = <0>; compatible = "ti,mux-clock"; + clock-output-names = "usbphy_32khz_clkmux"; clocks = <&clk_32768_ck>, <&clk_32k_tpm_ck>; reg = <0x4260>; }; - usb_phy0_always_on_clk32k: usb_phy0_always_on_clk32k@2a40 { + usb_phy0_always_on_clk32k: clock-usb-phy0-always-on-clk32k-8@2a40 { #clock-cells = <0>; compatible = "ti,gate-clock"; + clock-output-names = "usb_phy0_always_on_clk32k"; clocks = <&usbphy_32khz_clkmux>; ti,bit-shift = <8>; reg = <0x2a40>; }; - usb_phy1_always_on_clk32k: usb_phy1_always_on_clk32k@2a48 { + usb_phy1_always_on_clk32k: clock-usb-phy1-always-on-clk32k-8@2a48 { #clock-cells = <0>; compatible = "ti,gate-clock"; + clock-output-names = "usb_phy1_always_on_clk32k"; clocks = <&usbphy_32khz_clkmux>; ti,bit-shift = <8>; reg = <0x2a48>; }; - clkout1_osc_div_ck: clkout1-osc-div-ck { + clkout1_osc_div_ck: clock-clkout1-osc-div-ck { #clock-cells = <0>; compatible = "ti,divider-clock"; + clock-output-names = "clkout1_osc_div_ck"; clocks = <&sys_clkin_ck>; ti,bit-shift = <20>; ti,max-div = <4>; reg = <0x4100>; }; - clkout1_src2_mux_ck: clkout1-src2-mux-ck { + clkout1_src2_mux_ck: clock-clkout1-src2-mux-ck { #clock-cells = <0>; compatible = "ti,mux-clock"; + clock-output-names = "clkout1_src2_mux_ck"; clocks = <&clk_rc32k_ck>, <&sysclk_div>, <&dpll_ddr_m2_ck>, <&dpll_per_m2_ck>, <&dpll_disp_m2_ck>, <&dpll_mpu_m2_ck>; reg = <0x4100>; }; - clkout1_src2_pre_div_ck: clkout1-src2-pre-div-ck { + clkout1_src2_pre_div_ck: clock-clkout1-src2-pre-div-ck { #clock-cells = <0>; compatible = "ti,divider-clock"; + clock-output-names = "clkout1_src2_pre_div_ck"; clocks = <&clkout1_src2_mux_ck>; ti,bit-shift = <4>; ti,max-div = <8>; reg = <0x4100>; }; - clkout1_src2_post_div_ck: clkout1-src2-post-div-ck { + clkout1_src2_post_div_ck: clock-clkout1-src2-post-div-ck { #clock-cells = <0>; compatible = "ti,divider-clock"; + clock-output-names = "clkout1_src2_post_div_ck"; clocks = <&clkout1_src2_pre_div_ck>; ti,bit-shift = <8>; ti,max-div = <32>; @@ -749,18 +842,20 @@ reg = <0x4100>; }; - clkout1_mux_ck: clkout1-mux-ck { + clkout1_mux_ck: clock-clkout1-mux-ck { #clock-cells = <0>; compatible = "ti,mux-clock"; + clock-output-names = "clkout1_mux_ck"; clocks = <&clkout1_osc_div_ck>, <&clk_rc32k_ck>, <&clkout1_src2_post_div_ck>, <&dpll_extdev_m2_ck>; ti,bit-shift = <16>; reg = <0x4100>; }; - clkout1_ck: clkout1-ck { + clkout1_ck: clock-clkout1-ck { #clock-cells = <0>; compatible = "ti,gate-clock"; + clock-output-names = "clkout1_ck"; clocks = <&clkout1_mux_ck>; ti,bit-shift = <23>; reg = <0x4100>; @@ -768,120 +863,138 @@ }; &prcm { - wkup_cm: wkup-cm@2800 { + wkup_cm: clock@2800 { compatible = "ti,omap4-cm"; + clock-output-names = "wkup_cm"; reg = <0x2800 0x400>; #address-cells = <1>; #size-cells = <1>; ranges = <0 0x2800 0x400>; - l3s_tsc_clkctrl: l3s-tsc-clkctrl@120 { + l3s_tsc_clkctrl: clock@120 { compatible = "ti,clkctrl"; + clock-output-names = "l3s_tsc_clkctrl"; reg = <0x120 0x4>; #clock-cells = <2>; }; - l4_wkup_aon_clkctrl: l4-wkup-aon-clkctrl@228 { + l4_wkup_aon_clkctrl: clock@228 { compatible = "ti,clkctrl"; + clock-output-names = "l4_wkup_aon_clkctrl"; reg = <0x228 0xc>; #clock-cells = <2>; }; - l4_wkup_clkctrl: l4-wkup-clkctrl@220 { + l4_wkup_clkctrl: clock@220 { compatible = "ti,clkctrl"; + clock-output-names = "l4_wkup_clkctrl"; reg = <0x220 0x4>, <0x328 0x44>; #clock-cells = <2>; }; }; - mpu_cm: mpu-cm@8300 { + mpu_cm: clock@8300 { compatible = "ti,omap4-cm"; + clock-output-names = "mpu_cm"; reg = <0x8300 0x100>; #address-cells = <1>; #size-cells = <1>; ranges = <0 0x8300 0x100>; - mpu_clkctrl: mpu-clkctrl@20 { + mpu_clkctrl: clock@20 { compatible = "ti,clkctrl"; + clock-output-names = "mpu_clkctrl"; reg = <0x20 0x4>; #clock-cells = <2>; }; }; - gfx_l3_cm: gfx-l3-cm@8400 { + gfx_l3_cm: clock@8400 { compatible = "ti,omap4-cm"; + clock-output-names = "gfx_l3_cm"; reg = <0x8400 0x100>; #address-cells = <1>; #size-cells = <1>; ranges = <0 0x8400 0x100>; - gfx_l3_clkctrl: gfx-l3-clkctrl@20 { + gfx_l3_clkctrl: clock@20 { compatible = "ti,clkctrl"; + clock-output-names = "gfx_l3_clkctrl"; reg = <0x20 0x4>; #clock-cells = <2>; }; }; - l4_rtc_cm: l4-rtc-cm@8500 { + l4_rtc_cm: clock@8500 { compatible = "ti,omap4-cm"; + clock-output-names = "l4_rtc_cm"; reg = <0x8500 0x100>; #address-cells = <1>; #size-cells = <1>; ranges = <0 0x8500 0x100>; - l4_rtc_clkctrl: l4-rtc-clkctrl@20 { + l4_rtc_clkctrl: clock@20 { compatible = "ti,clkctrl"; + clock-output-names = "l4_rtc_clkctrl"; reg = <0x20 0x4>; #clock-cells = <2>; }; }; - per_cm: per-cm@8800 { + per_cm: clock@8800 { compatible = "ti,omap4-cm"; + clock-output-names = "per_cm"; reg = <0x8800 0xc00>; #address-cells = <1>; #size-cells = <1>; ranges = <0 0x8800 0xc00>; - l3_clkctrl: l3-clkctrl@20 { + l3_clkctrl: clock@20 { compatible = "ti,clkctrl"; + clock-output-names = "l3_clkctrl"; reg = <0x20 0x3c>, <0x78 0x2c>; #clock-cells = <2>; }; - l3s_clkctrl: l3s-clkctrl@68 { + l3s_clkctrl: clock@68 { compatible = "ti,clkctrl"; + clock-output-names = "l3s_clkctrl"; reg = <0x68 0xc>, <0x220 0x4c>; #clock-cells = <2>; }; - pruss_ocp_clkctrl: pruss-ocp-clkctrl@320 { + pruss_ocp_clkctrl: clock@320 { compatible = "ti,clkctrl"; + clock-output-names = "pruss_ocp_clkctrl"; reg = <0x320 0x4>; #clock-cells = <2>; }; - l4ls_clkctrl: l4ls-clkctrl@420 { + l4ls_clkctrl: clock@420 { compatible = "ti,clkctrl"; + clock-output-names = "l4ls_clkctrl"; reg = <0x420 0x1a4>; #clock-cells = <2>; }; - emif_clkctrl: emif-clkctrl@720 { + emif_clkctrl: clock@720 { compatible = "ti,clkctrl"; + clock-output-names = "emif_clkctrl"; reg = <0x720 0x4>; #clock-cells = <2>; }; - dss_clkctrl: dss-clkctrl@a20 { + dss_clkctrl: clock@a20 { compatible = "ti,clkctrl"; + clock-output-names = "dss_clkctrl"; reg = <0xa20 0x4>; #clock-cells = <2>; }; - cpsw_125mhz_clkctrl: cpsw-125mhz-clkctrl@b20 { + cpsw_125mhz_clkctrl: clock@b20 { compatible = "ti,clkctrl"; + clock-output-names = "cpsw_125mhz_clkctrl"; reg = <0xb20 0x4>; #clock-cells = <2>; }; diff --git a/arch/arm/boot/dts/am574x-idk.dts b/arch/arm/boot/dts/am574x-idk.dts index 6dff3660bf09..47b9174d2353 100644 --- a/arch/arm/boot/dts/am574x-idk.dts +++ b/arch/arm/boot/dts/am574x-idk.dts @@ -18,7 +18,7 @@ &qspi { spi-max-frequency = <96000000>; - m25p80@0 { + flash@0 { spi-max-frequency = <96000000>; }; }; diff --git a/arch/arm/boot/dts/am57xx-cl-som-am57x.dts b/arch/arm/boot/dts/am57xx-cl-som-am57x.dts index 2e94f32d9dfc..2fc9a5d5e0c0 100644 --- a/arch/arm/boot/dts/am57xx-cl-som-am57x.dts +++ b/arch/arm/boot/dts/am57xx-cl-som-am57x.dts @@ -491,7 +491,7 @@ spi-max-frequency = <48000000>; - spi_flash: spi_flash@0 { + spi_flash: flash@0 { #address-cells = <1>; #size-cells = <1>; compatible = "spansion,m25p80", "jedec,spi-nor"; diff --git a/arch/arm/boot/dts/am57xx-idk-common.dtsi b/arch/arm/boot/dts/am57xx-idk-common.dtsi index 9fcb8944aa3e..c06eda817242 100644 --- a/arch/arm/boot/dts/am57xx-idk-common.dtsi +++ b/arch/arm/boot/dts/am57xx-idk-common.dtsi @@ -526,7 +526,7 @@ status = "okay"; spi-max-frequency = <76800000>; - m25p80@0 { + flash@0 { compatible = "s25fl256s1", "jedec,spi-nor"; spi-max-frequency = <76800000>; reg = <0>; diff --git a/arch/arm/boot/dts/armada-370-db.dts b/arch/arm/boot/dts/armada-370-db.dts index 77261a2fb949..a7dc4c04d10b 100644 --- a/arch/arm/boot/dts/armada-370-db.dts +++ b/arch/arm/boot/dts/armada-370-db.dts @@ -203,7 +203,7 @@ pinctrl-names = "default"; status = "okay"; - spi-flash@0 { + flash@0 { #address-cells = <1>; #size-cells = <1>; compatible = "mx25l25635e", "jedec,spi-nor"; diff --git a/arch/arm/boot/dts/armada-370-seagate-personal-cloud.dtsi b/arch/arm/boot/dts/armada-370-seagate-personal-cloud.dtsi index a624b2371fb6..0abac5ffe45a 100644 --- a/arch/arm/boot/dts/armada-370-seagate-personal-cloud.dtsi +++ b/arch/arm/boot/dts/armada-370-seagate-personal-cloud.dtsi @@ -159,7 +159,7 @@ pinctrl-0 = <&spi0_pins2>; pinctrl-names = "default"; - spi-flash@0 { + flash@0 { #address-cells = <1>; #size-cells = <1>; /* MX25L8006E */ diff --git a/arch/arm/boot/dts/armada-370-synology-ds213j.dts b/arch/arm/boot/dts/armada-370-synology-ds213j.dts index 64f2ce254fb6..e72b8ed4b997 100644 --- a/arch/arm/boot/dts/armada-370-synology-ds213j.dts +++ b/arch/arm/boot/dts/armada-370-synology-ds213j.dts @@ -258,7 +258,7 @@ &spi0 { status = "okay"; - spi-flash@0 { + flash@0 { #address-cells = <1>; #size-cells = <1>; compatible = "micron,n25q064", "jedec,spi-nor"; diff --git a/arch/arm/boot/dts/armada-375-db.dts b/arch/arm/boot/dts/armada-375-db.dts index 0e679465cbb5..4c4092790a20 100644 --- a/arch/arm/boot/dts/armada-375-db.dts +++ b/arch/arm/boot/dts/armada-375-db.dts @@ -64,7 +64,7 @@ status = "disabled"; - spi-flash@0 { + flash@0 { #address-cells = <1>; #size-cells = <1>; compatible = "n25q128a13", "jedec,spi-nor"; diff --git a/arch/arm/boot/dts/armada-381-netgear-gs110emx.dts b/arch/arm/boot/dts/armada-381-netgear-gs110emx.dts index 0a961116a1f9..396172067f6a 100644 --- a/arch/arm/boot/dts/armada-381-netgear-gs110emx.dts +++ b/arch/arm/boot/dts/armada-381-netgear-gs110emx.dts @@ -242,7 +242,7 @@ pinctrl-names = "default"; status = "okay"; - spi-flash@0 { + flash@0 { #address-cells = <1>; #size-cells = <1>; compatible = "jedec,spi-nor"; diff --git a/arch/arm/boot/dts/armada-385-atl-x530.dts b/arch/arm/boot/dts/armada-385-atl-x530.dts index ed3f41c7df71..241f5d7c80e9 100644 --- a/arch/arm/boot/dts/armada-385-atl-x530.dts +++ b/arch/arm/boot/dts/armada-385-atl-x530.dts @@ -168,7 +168,7 @@ pinctrl-0 = <&spi1_pins>; status = "okay"; - spi-flash@1 { + flash@1 { #address-cells = <1>; #size-cells = <1>; compatible = "jedec,spi-nor"; diff --git a/arch/arm/boot/dts/armada-385-clearfog-gtr.dtsi b/arch/arm/boot/dts/armada-385-clearfog-gtr.dtsi index 624bbcae68c0..10ad46f29393 100644 --- a/arch/arm/boot/dts/armada-385-clearfog-gtr.dtsi +++ b/arch/arm/boot/dts/armada-385-clearfog-gtr.dtsi @@ -365,7 +365,7 @@ pinctrl-names = "default"; status = "okay"; - spi-flash@0 { + flash@0 { #address-cells = <1>; #size-cells = <0>; compatible = "w25q32", "jedec,spi-nor"; diff --git a/arch/arm/boot/dts/armada-385-db-88f6820-amc.dts b/arch/arm/boot/dts/armada-385-db-88f6820-amc.dts index 7881df3b28a0..389d9c75d546 100644 --- a/arch/arm/boot/dts/armada-385-db-88f6820-amc.dts +++ b/arch/arm/boot/dts/armada-385-db-88f6820-amc.dts @@ -126,7 +126,7 @@ pinctrl-0 = <&spi1_pins>; status = "okay"; - spi-flash@0 { + flash@0 { #address-cells = <1>; #size-cells = <1>; compatible = "jedec,spi-nor"; diff --git a/arch/arm/boot/dts/armada-385-db-ap.dts b/arch/arm/boot/dts/armada-385-db-ap.dts index 0e4613bb56ee..332f8fce77dc 100644 --- a/arch/arm/boot/dts/armada-385-db-ap.dts +++ b/arch/arm/boot/dts/armada-385-db-ap.dts @@ -192,7 +192,7 @@ pinctrl-0 = <&spi1_pins>; status = "okay"; - spi-flash@0 { + flash@0 { #address-cells = <1>; #size-cells = <1>; compatible = "st,m25p128", "jedec,spi-nor"; diff --git a/arch/arm/boot/dts/armada-385-synology-ds116.dts b/arch/arm/boot/dts/armada-385-synology-ds116.dts index d8769956cbfc..2622af73c9da 100644 --- a/arch/arm/boot/dts/armada-385-synology-ds116.dts +++ b/arch/arm/boot/dts/armada-385-synology-ds116.dts @@ -223,7 +223,7 @@ pinctrl-0 = <&spi0_pins>; status = "okay"; - spi-flash@0 { + flash@0 { #address-cells = <1>; #size-cells = <1>; compatible = "macronix,mx25l6405d", "jedec,spi-nor"; diff --git a/arch/arm/boot/dts/armada-385-turris-omnia.dts b/arch/arm/boot/dts/armada-385-turris-omnia.dts index f240018148f6..f4878df39753 100644 --- a/arch/arm/boot/dts/armada-385-turris-omnia.dts +++ b/arch/arm/boot/dts/armada-385-turris-omnia.dts @@ -348,7 +348,11 @@ #size-cells = <0>; reg = <5>; - /* ATSHA204A at address 0x64 */ + /* ATSHA204A-MAHDA-T crypto module */ + crypto@64 { + compatible = "atmel,atsha204a"; + reg = <0x64>; + }; }; i2c@6 { @@ -485,7 +489,7 @@ pinctrl-0 = <&spi0_pins &spi0cs0_pins>; status = "okay"; - spi-nor@0 { + flash@0 { compatible = "spansion,s25fl164k", "jedec,spi-nor"; #address-cells = <1>; #size-cells = <1>; diff --git a/arch/arm/boot/dts/armada-388-db.dts b/arch/arm/boot/dts/armada-388-db.dts index a2bec07bf4c5..5130eccc32af 100644 --- a/arch/arm/boot/dts/armada-388-db.dts +++ b/arch/arm/boot/dts/armada-388-db.dts @@ -133,7 +133,7 @@ &spi0 { status = "okay"; - spi-flash@0 { + flash@0 { #address-cells = <1>; #size-cells = <1>; compatible = "w25q32", "jedec,spi-nor"; diff --git a/arch/arm/boot/dts/armada-388-gp.dts b/arch/arm/boot/dts/armada-388-gp.dts index 9d873257ac45..e2ba50520b6b 100644 --- a/arch/arm/boot/dts/armada-388-gp.dts +++ b/arch/arm/boot/dts/armada-388-gp.dts @@ -395,7 +395,7 @@ pinctrl-0 = <&spi0_pins>; status = "okay"; - spi-flash@0 { + flash@0 { #address-cells = <1>; #size-cells = <1>; compatible = "st,m25p128", "jedec,spi-nor"; diff --git a/arch/arm/boot/dts/armada-388-rd.dts b/arch/arm/boot/dts/armada-388-rd.dts index 328a4d6afd2c..c0efafd45b33 100644 --- a/arch/arm/boot/dts/armada-388-rd.dts +++ b/arch/arm/boot/dts/armada-388-rd.dts @@ -97,7 +97,7 @@ &spi0 { status = "okay"; - spi-flash@0 { + flash@0 { #address-cells = <1>; #size-cells = <1>; compatible = "st,m25p128", "jedec,spi-nor"; diff --git a/arch/arm/boot/dts/armada-38x-solidrun-microsom.dtsi b/arch/arm/boot/dts/armada-38x-solidrun-microsom.dtsi index 363ac4238859..2c64bc6e5a17 100644 --- a/arch/arm/boot/dts/armada-38x-solidrun-microsom.dtsi +++ b/arch/arm/boot/dts/armada-38x-solidrun-microsom.dtsi @@ -101,7 +101,7 @@ /* The microsom has an optional W25Q32 on board, connected to CS0 */ pinctrl-0 = <&spi1_pins>; - w25q32: spi-flash@0 { + w25q32: flash@0 { #address-cells = <1>; #size-cells = <1>; compatible = "w25q32", "jedec,spi-nor"; diff --git a/arch/arm/boot/dts/armada-390-db.dts b/arch/arm/boot/dts/armada-390-db.dts index 0e29474ae9a2..792d0a0184e8 100644 --- a/arch/arm/boot/dts/armada-390-db.dts +++ b/arch/arm/boot/dts/armada-390-db.dts @@ -81,7 +81,7 @@ pinctrl-0 = <&spi1_pins>; pinctrl-names = "default"; - spi-flash@1 { + flash@1 { #address-cells = <1>; #size-cells = <1>; compatible = "n25q128a13", diff --git a/arch/arm/boot/dts/armada-398-db.dts b/arch/arm/boot/dts/armada-398-db.dts index fc28308e5bc5..ec6cdbeedde7 100644 --- a/arch/arm/boot/dts/armada-398-db.dts +++ b/arch/arm/boot/dts/armada-398-db.dts @@ -79,7 +79,7 @@ pinctrl-0 = <&spi1_pins>; pinctrl-names = "default"; - spi-flash@0 { + flash@0 { #address-cells = <1>; #size-cells = <0>; compatible = "n25q128a13", "jedec,spi-nor"; diff --git a/arch/arm/boot/dts/armada-xp-axpwifiap.dts b/arch/arm/boot/dts/armada-xp-axpwifiap.dts index 606fd3476a59..3e77b4337802 100644 --- a/arch/arm/boot/dts/armada-xp-axpwifiap.dts +++ b/arch/arm/boot/dts/armada-xp-axpwifiap.dts @@ -134,7 +134,7 @@ &spi0 { status = "okay"; - spi-flash@0 { + flash@0 { #address-cells = <1>; #size-cells = <1>; compatible = "n25q128a13", "jedec,spi-nor"; diff --git a/arch/arm/boot/dts/armada-xp-crs305-1g-4s-bit.dts b/arch/arm/boot/dts/armada-xp-crs305-1g-4s-bit.dts index a022c68dc943..c28e140b4afc 100644 --- a/arch/arm/boot/dts/armada-xp-crs305-1g-4s-bit.dts +++ b/arch/arm/boot/dts/armada-xp-crs305-1g-4s-bit.dts @@ -15,7 +15,7 @@ &spi0 { status = "okay"; - spi-flash@0 { + flash@0 { #address-cells = <1>; #size-cells = <1>; compatible = "jedec,spi-nor"; diff --git a/arch/arm/boot/dts/armada-xp-crs305-1g-4s.dtsi b/arch/arm/boot/dts/armada-xp-crs305-1g-4s.dtsi index 32fb21b2bf6a..47b003a81bd4 100644 --- a/arch/arm/boot/dts/armada-xp-crs305-1g-4s.dtsi +++ b/arch/arm/boot/dts/armada-xp-crs305-1g-4s.dtsi @@ -80,7 +80,7 @@ &spi0 { status = "okay"; - spi-flash@0 { + flash@0 { #address-cells = <1>; #size-cells = <1>; compatible = "jedec,spi-nor"; diff --git a/arch/arm/boot/dts/armada-xp-crs326-24g-2s-bit.dts b/arch/arm/boot/dts/armada-xp-crs326-24g-2s-bit.dts index 21f442afab1f..20ba5c823bb2 100644 --- a/arch/arm/boot/dts/armada-xp-crs326-24g-2s-bit.dts +++ b/arch/arm/boot/dts/armada-xp-crs326-24g-2s-bit.dts @@ -15,7 +15,7 @@ &spi0 { status = "okay"; - spi-flash@0 { + flash@0 { #address-cells = <1>; #size-cells = <1>; compatible = "jedec,spi-nor"; diff --git a/arch/arm/boot/dts/armada-xp-crs326-24g-2s.dtsi b/arch/arm/boot/dts/armada-xp-crs326-24g-2s.dtsi index f3e1a25ca5f2..cab99d8e2911 100644 --- a/arch/arm/boot/dts/armada-xp-crs326-24g-2s.dtsi +++ b/arch/arm/boot/dts/armada-xp-crs326-24g-2s.dtsi @@ -80,7 +80,7 @@ &spi0 { status = "okay"; - spi-flash@0 { + flash@0 { #address-cells = <1>; #size-cells = <1>; compatible = "jedec,spi-nor"; diff --git a/arch/arm/boot/dts/armada-xp-crs328-4c-20s-4s-bit.dts b/arch/arm/boot/dts/armada-xp-crs328-4c-20s-4s-bit.dts index e05aee6cdc04..2caa3980fdf6 100644 --- a/arch/arm/boot/dts/armada-xp-crs328-4c-20s-4s-bit.dts +++ b/arch/arm/boot/dts/armada-xp-crs328-4c-20s-4s-bit.dts @@ -15,7 +15,7 @@ &spi0 { status = "okay"; - spi-flash@0 { + flash@0 { #address-cells = <1>; #size-cells = <1>; compatible = "jedec,spi-nor"; diff --git a/arch/arm/boot/dts/armada-xp-crs328-4c-20s-4s.dtsi b/arch/arm/boot/dts/armada-xp-crs328-4c-20s-4s.dtsi index c8b1355ce15e..7028482ce4b2 100644 --- a/arch/arm/boot/dts/armada-xp-crs328-4c-20s-4s.dtsi +++ b/arch/arm/boot/dts/armada-xp-crs328-4c-20s-4s.dtsi @@ -80,7 +80,7 @@ &spi0 { status = "okay"; - spi-flash@0 { + flash@0 { #address-cells = <1>; #size-cells = <1>; compatible = "jedec,spi-nor"; diff --git a/arch/arm/boot/dts/armada-xp-db-dxbc2.dts b/arch/arm/boot/dts/armada-xp-db-dxbc2.dts index 8a3aa616bbd0..02bef8dc4270 100644 --- a/arch/arm/boot/dts/armada-xp-db-dxbc2.dts +++ b/arch/arm/boot/dts/armada-xp-db-dxbc2.dts @@ -93,7 +93,7 @@ &spi0 { status = "okay"; - spi-flash@0 { + flash@0 { #address-cells = <1>; #size-cells = <1>; compatible = "m25p64"; diff --git a/arch/arm/boot/dts/armada-xp-db-xc3-24g4xg.dts b/arch/arm/boot/dts/armada-xp-db-xc3-24g4xg.dts index 4ec0ae01b61d..d1b61dad0c46 100644 --- a/arch/arm/boot/dts/armada-xp-db-xc3-24g4xg.dts +++ b/arch/arm/boot/dts/armada-xp-db-xc3-24g4xg.dts @@ -89,7 +89,7 @@ &spi0 { status = "okay"; - spi-flash@0 { + flash@0 { #address-cells = <1>; #size-cells = <1>; compatible = "m25p64"; diff --git a/arch/arm/boot/dts/armada-xp-db.dts b/arch/arm/boot/dts/armada-xp-db.dts index 5d04dc68cf57..75318fd0fc11 100644 --- a/arch/arm/boot/dts/armada-xp-db.dts +++ b/arch/arm/boot/dts/armada-xp-db.dts @@ -235,7 +235,7 @@ &spi0 { status = "okay"; - spi-flash@0 { + flash@0 { #address-cells = <1>; #size-cells = <1>; compatible = "m25p64", "jedec,spi-nor"; diff --git a/arch/arm/boot/dts/armada-xp-gp.dts b/arch/arm/boot/dts/armada-xp-gp.dts index b4cca507cf13..d1d348b91c0a 100644 --- a/arch/arm/boot/dts/armada-xp-gp.dts +++ b/arch/arm/boot/dts/armada-xp-gp.dts @@ -220,7 +220,7 @@ &spi0 { status = "okay"; - spi-flash@0 { + flash@0 { #address-cells = <1>; #size-cells = <1>; compatible = "n25q128a13", "jedec,spi-nor"; diff --git a/arch/arm/boot/dts/armada-xp-linksys-mamba.dts b/arch/arm/boot/dts/armada-xp-linksys-mamba.dts index 8480a16919a0..36932e3b781a 100644 --- a/arch/arm/boot/dts/armada-xp-linksys-mamba.dts +++ b/arch/arm/boot/dts/armada-xp-linksys-mamba.dts @@ -255,7 +255,7 @@ &spi0 { status = "okay"; - spi-flash@0 { + flash@0 { #address-cells = <1>; #size-cells = <1>; compatible = "everspin,mr25h256"; diff --git a/arch/arm/boot/dts/armada-xp-synology-ds414.dts b/arch/arm/boot/dts/armada-xp-synology-ds414.dts index 809e821d7399..5551bac1962c 100644 --- a/arch/arm/boot/dts/armada-xp-synology-ds414.dts +++ b/arch/arm/boot/dts/armada-xp-synology-ds414.dts @@ -274,7 +274,7 @@ &spi0 { status = "okay"; - spi-flash@0 { + flash@0 { #address-cells = <1>; #size-cells = <1>; compatible = "micron,n25q064", "jedec,spi-nor"; diff --git a/arch/arm/boot/dts/bcm-cygnus.dtsi b/arch/arm/boot/dts/bcm-cygnus.dtsi index ad65be871938..f9f79ed82518 100644 --- a/arch/arm/boot/dts/bcm-cygnus.dtsi +++ b/arch/arm/boot/dts/bcm-cygnus.dtsi @@ -397,8 +397,8 @@ #size-cells = <0>; interrupts = <GIC_SPI 78 IRQ_TYPE_LEVEL_HIGH>; pinctrl-0 = <&spi_0>; - clocks = <&axi81_clk>; - clock-names = "apb_pclk"; + clocks = <&axi81_clk>, <&axi81_clk>; + clock-names = "sspclk", "apb_pclk"; status = "disabled"; }; @@ -409,8 +409,8 @@ #size-cells = <0>; interrupts = <GIC_SPI 79 IRQ_TYPE_LEVEL_HIGH>; pinctrl-0 = <&spi_1>; - clocks = <&axi81_clk>; - clock-names = "apb_pclk"; + clocks = <&axi81_clk>, <&axi81_clk>; + clock-names = "sspclk", "apb_pclk"; status = "disabled"; }; @@ -421,8 +421,8 @@ #size-cells = <0>; interrupts = <GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>; pinctrl-0 = <&spi_2>; - clocks = <&axi81_clk>; - clock-names = "apb_pclk"; + clocks = <&axi81_clk>, <&axi81_clk>; + clock-names = "sspclk", "apb_pclk"; status = "disabled"; }; diff --git a/arch/arm/boot/dts/bcm2835-rpi-a-plus.dts b/arch/arm/boot/dts/bcm2835-rpi-a-plus.dts index 40b9405f1a8e..9b9a18bbb20a 100644 --- a/arch/arm/boot/dts/bcm2835-rpi-a-plus.dts +++ b/arch/arm/boot/dts/bcm2835-rpi-a-plus.dts @@ -32,7 +32,6 @@ * This is based on the unreleased schematic for the Model A+. * * Legend: - * "NC" = not connected (no rail from the SoC) * "FOO" = GPIO line named "FOO" on the schematic * "FOO_N" = GPIO line named "FOO" on schematic, active low */ @@ -67,21 +66,21 @@ "GPIO27", "SDA0", "SCL0", - "NC", /* GPIO30 */ - "NC", /* GPIO31 */ + "", /* GPIO30 */ + "", /* GPIO31 */ "CAM_GPIO1", /* GPIO32 */ - "NC", /* GPIO33 */ - "NC", /* GPIO34 */ + "", /* GPIO33 */ + "", /* GPIO34 */ "PWR_LOW_N", /* GPIO35 */ - "NC", /* GPIO36 */ - "NC", /* GPIO37 */ + "", /* GPIO36 */ + "", /* GPIO37 */ "USB_LIMIT", /* GPIO38 */ - "NC", /* GPIO39 */ + "", /* GPIO39 */ "PWM0_OUT", /* GPIO40 */ "CAM_GPIO0", /* GPIO41 */ - "NC", /* GPIO42 */ - "NC", /* GPIO43 */ - "NC", /* GPIO44 */ + "", /* GPIO42 */ + "", /* GPIO43 */ + "", /* GPIO44 */ "PWM1_OUT", /* GPIO45 */ "HDMI_HPD_N", "STATUS_LED", diff --git a/arch/arm/boot/dts/bcm2835-rpi-a.dts b/arch/arm/boot/dts/bcm2835-rpi-a.dts index 11edb581dbaf..f664e4fced93 100644 --- a/arch/arm/boot/dts/bcm2835-rpi-a.dts +++ b/arch/arm/boot/dts/bcm2835-rpi-a.dts @@ -26,7 +26,6 @@ * RPI00021 sheet 02 * * Legend: - * "NC" = not connected (no rail from the SoC) * "FOO" = GPIO line named "FOO" on the schematic * "FOO_N" = GPIO line named "FOO" on schematic, active low */ @@ -42,41 +41,41 @@ "SPI_MISO", "SPI_MOSI", "SPI_SCLK", - "NC", /* GPIO12 */ - "NC", /* GPIO13 */ + "", /* GPIO12 */ + "", /* GPIO13 */ /* Serial port */ "TXD0", "RXD0", "STATUS_LED_N", "GPIO17", "GPIO18", - "NC", /* GPIO19 */ - "NC", /* GPIO20 */ + "", /* GPIO19 */ + "", /* GPIO20 */ "GPIO21", "GPIO22", "GPIO23", "GPIO24", "GPIO25", - "NC", /* GPIO26 */ + "", /* GPIO26 */ "CAM_GPIO0", /* Binary number representing build/revision */ "CONFIG0", "CONFIG1", "CONFIG2", "CONFIG3", - "NC", /* GPIO32 */ - "NC", /* GPIO33 */ - "NC", /* GPIO34 */ - "NC", /* GPIO35 */ - "NC", /* GPIO36 */ - "NC", /* GPIO37 */ - "NC", /* GPIO38 */ - "NC", /* GPIO39 */ + "", /* GPIO32 */ + "", /* GPIO33 */ + "", /* GPIO34 */ + "", /* GPIO35 */ + "", /* GPIO36 */ + "", /* GPIO37 */ + "", /* GPIO38 */ + "", /* GPIO39 */ "PWM0_OUT", - "NC", /* GPIO41 */ - "NC", /* GPIO42 */ - "NC", /* GPIO43 */ - "NC", /* GPIO44 */ + "", /* GPIO41 */ + "", /* GPIO42 */ + "", /* GPIO43 */ + "", /* GPIO44 */ "PWM1_OUT", "HDMI_HPD_P", "SD_CARD_DET", diff --git a/arch/arm/boot/dts/bcm2835-rpi-b-plus.dts b/arch/arm/boot/dts/bcm2835-rpi-b-plus.dts index 1b435c64bd9c..248feb2ed23d 100644 --- a/arch/arm/boot/dts/bcm2835-rpi-b-plus.dts +++ b/arch/arm/boot/dts/bcm2835-rpi-b-plus.dts @@ -34,7 +34,6 @@ * RPI-BPLUS sheet 1 * * Legend: - * "NC" = not connected (no rail from the SoC) * "FOO" = GPIO line named "FOO" on the schematic * "FOO_N" = GPIO line named "FOO" on schematic, active low */ @@ -69,21 +68,21 @@ "GPIO27", "SDA0", "SCL0", - "NC", /* GPIO30 */ + "", /* GPIO30 */ "LAN_RUN", /* GPIO31 */ "CAM_GPIO1", /* GPIO32 */ - "NC", /* GPIO33 */ - "NC", /* GPIO34 */ + "", /* GPIO33 */ + "", /* GPIO34 */ "PWR_LOW_N", /* GPIO35 */ - "NC", /* GPIO36 */ - "NC", /* GPIO37 */ + "", /* GPIO36 */ + "", /* GPIO37 */ "USB_LIMIT", /* GPIO38 */ - "NC", /* GPIO39 */ + "", /* GPIO39 */ "PWM0_OUT", /* GPIO40 */ "CAM_GPIO0", /* GPIO41 */ - "NC", /* GPIO42 */ - "NC", /* GPIO43 */ - "ETHCLK", /* GPIO44 */ + "", /* GPIO42 */ + "", /* GPIO43 */ + "ETH_CLK", /* GPIO44 */ "PWM1_OUT", /* GPIO45 */ "HDMI_HPD_N", "STATUS_LED", diff --git a/arch/arm/boot/dts/bcm2835-rpi-b-rev2.dts b/arch/arm/boot/dts/bcm2835-rpi-b-rev2.dts index a23c25c00eea..f5b66d3f4ff3 100644 --- a/arch/arm/boot/dts/bcm2835-rpi-b-rev2.dts +++ b/arch/arm/boot/dts/bcm2835-rpi-b-rev2.dts @@ -27,7 +27,6 @@ * RPI00022 sheet 02 * * Legend: - * "NC" = not connected (no rail from the SoC) * "FOO" = GPIO line named "FOO" on the schematic * "FOO_N" = GPIO line named "FOO" on schematic, active low */ @@ -43,40 +42,40 @@ "SPI_MISO", "SPI_MOSI", "SPI_SCLK", - "NC", /* GPIO12 */ - "NC", /* GPIO13 */ + "", /* GPIO12 */ + "", /* GPIO13 */ /* Serial port */ "TXD0", "RXD0", "STATUS_LED_N", "GPIO17", "GPIO18", - "NC", /* GPIO19 */ - "NC", /* GPIO20 */ + "", /* GPIO19 */ + "", /* GPIO20 */ "CAM_GPIO", "GPIO22", "GPIO23", "GPIO24", "GPIO25", - "NC", /* GPIO26 */ + "", /* GPIO26 */ "GPIO27", "GPIO28", "GPIO29", "GPIO30", "GPIO31", - "NC", /* GPIO32 */ - "NC", /* GPIO33 */ - "NC", /* GPIO34 */ - "NC", /* GPIO35 */ - "NC", /* GPIO36 */ - "NC", /* GPIO37 */ - "NC", /* GPIO38 */ - "NC", /* GPIO39 */ + "", /* GPIO32 */ + "", /* GPIO33 */ + "", /* GPIO34 */ + "", /* GPIO35 */ + "", /* GPIO36 */ + "", /* GPIO37 */ + "", /* GPIO38 */ + "", /* GPIO39 */ "PWM0_OUT", - "NC", /* GPIO41 */ - "NC", /* GPIO42 */ - "NC", /* GPIO43 */ - "NC", /* GPIO44 */ + "", /* GPIO41 */ + "", /* GPIO42 */ + "", /* GPIO43 */ + "", /* GPIO44 */ "PWM1_OUT", "HDMI_HPD_P", "SD_CARD_DET", diff --git a/arch/arm/boot/dts/bcm2835-rpi-b.dts b/arch/arm/boot/dts/bcm2835-rpi-b.dts index 1b63d6b19750..f589bede2b11 100644 --- a/arch/arm/boot/dts/bcm2835-rpi-b.dts +++ b/arch/arm/boot/dts/bcm2835-rpi-b.dts @@ -27,7 +27,6 @@ * RPI00021 sheet 02 * * Legend: - * "NC" = not connected (no rail from the SoC) * "FOO" = GPIO line named "FOO" on the schematic * "FOO_N" = GPIO line named "FOO" on schematic, active low */ @@ -43,41 +42,40 @@ "SPI_MISO", "SPI_MOSI", "SPI_SCLK", - "NC", /* GPIO12 */ - "NC", /* GPIO13 */ + "", /* GPIO12 */ + "", /* GPIO13 */ /* Serial port */ "TXD0", "RXD0", "STATUS_LED_N", "GPIO17", "GPIO18", - "NC", /* GPIO19 */ - "NC", /* GPIO20 */ - "GPIO21", + "", /* GPIO19 */ + "", /* GPIO20 */ + "CAM_GPIO0", "GPIO22", "GPIO23", "GPIO24", "GPIO25", - "NC", /* GPIO26 */ - "CAM_GPIO0", - /* Binary number representing build/revision */ - "CONFIG0", - "CONFIG1", - "CONFIG2", - "CONFIG3", - "NC", /* GPIO32 */ - "NC", /* GPIO33 */ - "NC", /* GPIO34 */ - "NC", /* GPIO35 */ - "NC", /* GPIO36 */ - "NC", /* GPIO37 */ - "NC", /* GPIO38 */ - "NC", /* GPIO39 */ + "", /* GPIO26 */ + "GPIO27", + "GPIO28", + "GPIO29", + "GPIO30", + "GPIO31", + "", /* GPIO32 */ + "", /* GPIO33 */ + "", /* GPIO34 */ + "", /* GPIO35 */ + "", /* GPIO36 */ + "", /* GPIO37 */ + "", /* GPIO38 */ + "", /* GPIO39 */ "PWM0_OUT", - "NC", /* GPIO41 */ - "NC", /* GPIO42 */ - "NC", /* GPIO43 */ - "NC", /* GPIO44 */ + "", /* GPIO41 */ + "", /* GPIO42 */ + "", /* GPIO43 */ + "", /* GPIO44 */ "PWM1_OUT", "HDMI_HPD_P", "SD_CARD_DET", diff --git a/arch/arm/boot/dts/bcm2835-rpi-cm1-io1.dts b/arch/arm/boot/dts/bcm2835-rpi-cm1-io1.dts index a75c882e6575..87958a96c3e0 100644 --- a/arch/arm/boot/dts/bcm2835-rpi-cm1-io1.dts +++ b/arch/arm/boot/dts/bcm2835-rpi-cm1-io1.dts @@ -13,7 +13,6 @@ * This is based on the official GPU firmware DT blob. * * Legend: - * "NC" = not connected (no rail from the SoC) * "FOO" = GPIO line named "FOO" on the schematic * "FOO_N" = GPIO line named "FOO" on schematic, active low */ diff --git a/arch/arm/boot/dts/bcm2835-rpi-zero-w.dts b/arch/arm/boot/dts/bcm2835-rpi-zero-w.dts index 243236bc1e00..596bb1ef994e 100644 --- a/arch/arm/boot/dts/bcm2835-rpi-zero-w.dts +++ b/arch/arm/boot/dts/bcm2835-rpi-zero-w.dts @@ -39,7 +39,6 @@ * This is based on the official GPU firmware DT blob. * * Legend: - * "NC" = not connected (no rail from the SoC) * "FOO" = GPIO line named "FOO" on the schematic * "FOO_N" = GPIO line named "FOO" on schematic, active low */ @@ -74,19 +73,21 @@ "GPIO27", "SDA0", "SCL0", - "NC", /* GPIO30 */ - "NC", /* GPIO31 */ - "NC", /* GPIO32 */ - "NC", /* GPIO33 */ - "NC", /* GPIO34 */ - "NC", /* GPIO35 */ - "NC", /* GPIO36 */ - "NC", /* GPIO37 */ - "NC", /* GPIO38 */ - "NC", /* GPIO39 */ + /* Used by BT module */ + "CTS0", + "RTS0", + "TXD0", + "RXD0", + /* Used by Wifi */ + "SD1_CLK", + "SD1_CMD", + "SD1_DATA0", + "SD1_DATA1", + "SD1_DATA2", + "SD1_DATA3", "CAM_GPIO1", /* GPIO40 */ "WL_ON", /* GPIO41 */ - "NC", /* GPIO42 */ + "", /* GPIO42 */ "WIFI_CLK", /* GPIO43 */ "CAM_GPIO0", /* GPIO44 */ "BT_ON", /* GPIO45 */ diff --git a/arch/arm/boot/dts/bcm2835-rpi-zero.dts b/arch/arm/boot/dts/bcm2835-rpi-zero.dts index 6f9b3a908f28..a65c2bca69ea 100644 --- a/arch/arm/boot/dts/bcm2835-rpi-zero.dts +++ b/arch/arm/boot/dts/bcm2835-rpi-zero.dts @@ -29,7 +29,6 @@ * This is based on the official GPU firmware DT blob. * * Legend: - * "NC" = not connected (no rail from the SoC) * "FOO" = GPIO line named "FOO" on the schematic * "FOO_N" = GPIO line named "FOO" on schematic, active low */ @@ -64,22 +63,22 @@ "GPIO27", "SDA0", "SCL0", - "NC", /* GPIO30 */ - "NC", /* GPIO31 */ + "", /* GPIO30 */ + "", /* GPIO31 */ "CAM_GPIO1", /* GPIO32 */ - "NC", /* GPIO33 */ - "NC", /* GPIO34 */ - "NC", /* GPIO35 */ - "NC", /* GPIO36 */ - "NC", /* GPIO37 */ - "NC", /* GPIO38 */ - "NC", /* GPIO39 */ - "NC", /* GPIO40 */ + "", /* GPIO33 */ + "", /* GPIO34 */ + "", /* GPIO35 */ + "", /* GPIO36 */ + "", /* GPIO37 */ + "", /* GPIO38 */ + "", /* GPIO39 */ + "", /* GPIO40 */ "CAM_GPIO0", /* GPIO41 */ - "NC", /* GPIO42 */ - "NC", /* GPIO43 */ - "NC", /* GPIO44 */ - "NC", /* GPIO45 */ + "", /* GPIO42 */ + "", /* GPIO43 */ + "", /* GPIO44 */ + "", /* GPIO45 */ "HDMI_HPD_N", "STATUS_LED_N", /* Used by SD Card */ diff --git a/arch/arm/boot/dts/bcm2836-rpi-2-b.dts b/arch/arm/boot/dts/bcm2836-rpi-2-b.dts index d8af8eeac7b6..3635502b1e0a 100644 --- a/arch/arm/boot/dts/bcm2836-rpi-2-b.dts +++ b/arch/arm/boot/dts/bcm2836-rpi-2-b.dts @@ -34,7 +34,6 @@ * the official GPU firmware DT blob. * * Legend: - * "NC" = not connected (no rail from the SoC) * "FOO" = GPIO line named "FOO" on the schematic * "FOO_N" = GPIO line named "FOO" on schematic, active low */ @@ -83,7 +82,7 @@ "CAM_GPIO0", "SMPS_SCL", "SMPS_SDA", - "ETHCLK", + "ETH_CLK", "PWM1_OUT", "HDMI_HPD_N", "STATUS_LED", diff --git a/arch/arm/boot/dts/bcm2837-rpi-3-a-plus.dts b/arch/arm/boot/dts/bcm2837-rpi-3-a-plus.dts index d73daf5bff1d..f7222a28903e 100644 --- a/arch/arm/boot/dts/bcm2837-rpi-3-a-plus.dts +++ b/arch/arm/boot/dts/bcm2837-rpi-3-a-plus.dts @@ -55,7 +55,6 @@ * This is mostly based on the official GPU firmware DT blob. * * Legend: - * "NC" = not connected (no rail from the SoC) * "FOO" = GPIO line named "FOO" on the schematic * "FOO_N" = GPIO line named "FOO" on schematic, active low */ diff --git a/arch/arm/boot/dts/bcm2837-rpi-3-b-plus.dts b/arch/arm/boot/dts/bcm2837-rpi-3-b-plus.dts index e12938baaf12..ec721d323ac5 100644 --- a/arch/arm/boot/dts/bcm2837-rpi-3-b-plus.dts +++ b/arch/arm/boot/dts/bcm2837-rpi-3-b-plus.dts @@ -45,7 +45,7 @@ #gpio-cells = <2>; gpio-line-names = "BT_ON", "WL_ON", - "STATUS_LED_R", + "PWR_LED_R", "LAN_RUN", "", "CAM_GPIO0", @@ -61,7 +61,6 @@ * the official GPU firmware DT blob. * * Legend: - * "NC" = not connected (no rail from the SoC) * "FOO" = GPIO line named "FOO" on the schematic * "FOO_N" = GPIO line named "FOO" on schematic, active low */ @@ -110,7 +109,7 @@ "SD1_DATA3", "PWM0_OUT", "PWM1_OUT", - "ETHCLK", + "ETH_CLK", "WIFI_CLK", "SDA0", "SCL0", diff --git a/arch/arm/boot/dts/bcm2837-rpi-3-b.dts b/arch/arm/boot/dts/bcm2837-rpi-3-b.dts index 42b5383b55d8..fb6a417d73e7 100644 --- a/arch/arm/boot/dts/bcm2837-rpi-3-b.dts +++ b/arch/arm/boot/dts/bcm2837-rpi-3-b.dts @@ -54,7 +54,6 @@ * the official GPU firmware DT blob. * * Legend: - * "NC" = not connected (no rail from the SoC) * "FOO" = GPIO line named "FOO" on the schematic * "FOO_N" = GPIO line named "FOO" on schematic, active low */ @@ -103,7 +102,7 @@ "SD1_DATA3", "PWM0_OUT", "PWM1_OUT", - "ETHCLK", + "ETH_CLK", "WIFI_CLK", "SDA0", "SCL0", diff --git a/arch/arm/boot/dts/bcm2837-rpi-cm3-io3.dts b/arch/arm/boot/dts/bcm2837-rpi-cm3-io3.dts index 588d9411ceb6..cf84e69fced8 100644 --- a/arch/arm/boot/dts/bcm2837-rpi-cm3-io3.dts +++ b/arch/arm/boot/dts/bcm2837-rpi-cm3-io3.dts @@ -13,7 +13,6 @@ * This is based on the official GPU firmware DT blob. * * Legend: - * "NC" = not connected (no rail from the SoC) * "FOO" = GPIO line named "FOO" on the schematic * "FOO_N" = GPIO line named "FOO" on schematic, active low */ @@ -63,8 +62,8 @@ "GPIO43", "GPIO44", "GPIO45", - "GPIO46", - "GPIO47", + "SMPS_SCL", + "SMPS_SDA", /* Used by eMMC */ "SD_CLK_R", "SD_CMD_R", diff --git a/arch/arm/boot/dts/bcm2837-rpi-cm3.dtsi b/arch/arm/boot/dts/bcm2837-rpi-cm3.dtsi index 828a20561b96..f57b4ca145dd 100644 --- a/arch/arm/boot/dts/bcm2837-rpi-cm3.dtsi +++ b/arch/arm/boot/dts/bcm2837-rpi-cm3.dtsi @@ -41,12 +41,12 @@ #gpio-cells = <2>; gpio-line-names = "HDMI_HPD_N", "EMMC_EN_N", - "NC", - "NC", - "NC", - "NC", - "NC", - "NC"; + "", + "", + "", + "", + "", + ""; status = "okay"; }; }; diff --git a/arch/arm/boot/dts/bcm283x-rpi-smsc9512.dtsi b/arch/arm/boot/dts/bcm283x-rpi-smsc9512.dtsi index 967e081cb9c2..882b13807075 100644 --- a/arch/arm/boot/dts/bcm283x-rpi-smsc9512.dtsi +++ b/arch/arm/boot/dts/bcm283x-rpi-smsc9512.dtsi @@ -12,7 +12,7 @@ #address-cells = <1>; #size-cells = <0>; - ethernet: usbether@1 { + ethernet: ethernet@1 { compatible = "usb424,ec00"; reg = <1>; }; diff --git a/arch/arm/boot/dts/bcm283x-rpi-smsc9514.dtsi b/arch/arm/boot/dts/bcm283x-rpi-smsc9514.dtsi index dc7ae776db5f..4273b90b53cc 100644 --- a/arch/arm/boot/dts/bcm283x-rpi-smsc9514.dtsi +++ b/arch/arm/boot/dts/bcm283x-rpi-smsc9514.dtsi @@ -11,7 +11,7 @@ #address-cells = <1>; #size-cells = <0>; - ethernet: usbether@1 { + ethernet: ethernet@1 { compatible = "usb424,ec00"; reg = <1>; }; diff --git a/arch/arm/boot/dts/bcm4708-buffalo-wzr-1166dhp-common.dtsi b/arch/arm/boot/dts/bcm4708-buffalo-wzr-1166dhp-common.dtsi new file mode 100644 index 000000000000..d659e409a17e --- /dev/null +++ b/arch/arm/boot/dts/bcm4708-buffalo-wzr-1166dhp-common.dtsi @@ -0,0 +1,192 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT +/* + * Broadcom BCM470X / BCM5301X ARM platform code. + * DTS for Buffalo WZR-1166DHP and WZR-1166DHP2 + * + * Copyright (C) 2014 RafaÅ‚ MiÅ‚ecki <zajec5@gmail.com> + * Copyright (C) 2022 SHIMAMOTO Takayoshi <takayoshi.shimamoto.360@gmail.com> + */ + + +#include "bcm4708.dtsi" +#include "bcm5301x-nand-cs0-bch8.dtsi" +#include <dt-bindings/leds/common.h> + +/ { + spi { + compatible = "spi-gpio"; + num-chipselects = <1>; + gpio-sck = <&chipcommon 7 0>; + gpio-mosi = <&chipcommon 4 0>; + cs-gpios = <&chipcommon 6 0>; + #address-cells = <1>; + #size-cells = <0>; + + hc595: gpio_spi@0 { + compatible = "fairchild,74hc595"; + reg = <0>; + registers-number = <1>; + spi-max-frequency = <100000>; + + gpio-controller; + #gpio-cells = <2>; + + }; + }; + + leds { + compatible = "gpio-leds"; + + usb { + /* label = "bcm53xx:blue:usb"; */ + function = LED_FUNCTION_USB; + color = <LED_COLOR_ID_BLUE>; + gpios = <&hc595 0 GPIO_ACTIVE_HIGH>; + trigger-sources = <&ohci_port1>, <&ehci_port1>, + <&xhci_port1>, <&ohci_port2>, + <&ehci_port2>; + linux,default-trigger = "usbport"; + }; + + power0 { + /* label = "bcm53xx:red:power"; */ + function = LED_FUNCTION_FAULT; + color = <LED_COLOR_ID_RED>; + gpios = <&hc595 1 GPIO_ACTIVE_HIGH>; + }; + + power1 { + /* label = "bcm53xx:white:power"; */ + function = LED_FUNCTION_POWER; + color = <LED_COLOR_ID_WHITE>; + gpios = <&hc595 2 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "default-on"; + }; + + router0 { + /* label = "bcm53xx:blue:router"; */ + function = LED_FUNCTION_STATUS; + color = <LED_COLOR_ID_BLUE>; + gpios = <&hc595 3 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "default-on"; + }; + + router1 { + /* label = "bcm53xx:amber:router"; */ + function = LED_FUNCTION_STATUS; + color = <LED_COLOR_ID_AMBER>; + gpios = <&hc595 4 GPIO_ACTIVE_HIGH>; + }; + + wan { + /* label = "bcm53xx:blue:wan"; */ + function = LED_FUNCTION_WAN; + color = <LED_COLOR_ID_BLUE>; + gpios = <&hc595 5 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "default-on"; + }; + + wireless0 { + /* label = "bcm53xx:blue:wireless"; */ + function = LED_FUNCTION_WLAN; + color = <LED_COLOR_ID_BLUE>; + gpios = <&hc595 6 GPIO_ACTIVE_HIGH>; + }; + + wireless1 { + /* label = "bcm53xx:amber:wireless"; */ + function = LED_FUNCTION_WLAN; + color = <LED_COLOR_ID_AMBER>; + gpios = <&hc595 7 GPIO_ACTIVE_HIGH>; + }; + }; + + gpio-keys { + compatible = "gpio-keys"; + + restart { + label = "Reset"; + linux,code = <KEY_RESTART>; + gpios = <&chipcommon 11 GPIO_ACTIVE_LOW>; + }; + + aoss { + label = "AOSS"; + linux,code = <KEY_WPS_BUTTON>; + gpios = <&chipcommon 12 GPIO_ACTIVE_LOW>; + }; + + /* Commit mode set by switch? */ + mode { + label = "Mode"; + linux,code = <KEY_SETUP>; + gpios = <&chipcommon 13 GPIO_ACTIVE_LOW>; + }; + + /* Switch: AP mode */ + sw_ap { + label = "AP"; + linux,code = <BTN_0>; + gpios = <&chipcommon 14 GPIO_ACTIVE_LOW>; + }; + + eject { + label = "USB eject"; + linux,code = <KEY_EJECTCD>; + gpios = <&chipcommon 15 GPIO_ACTIVE_LOW>; + }; + }; +}; + +&usb2 { + vcc-gpio = <&chipcommon 9 GPIO_ACTIVE_HIGH>; +}; + +&usb3 { + vcc-gpio = <&chipcommon 10 GPIO_ACTIVE_LOW>; +}; + +&spi_nor { + status = "okay"; +}; + +&usb3_phy { + status = "okay"; +}; + +&srab { + status = "okay"; + + ports { + port@0 { + reg = <0>; + label = "lan1"; + }; + + port@1 { + reg = <1>; + label = "lan2"; + }; + + port@2 { + reg = <2>; + label = "lan3"; + }; + + port@3 { + reg = <3>; + label = "lan4"; + }; + + port@4 { + reg = <4>; + label = "wan"; + }; + + port@5 { + reg = <5>; + label = "cpu"; + ethernet = <&gmac0>; + }; + }; +}; diff --git a/arch/arm/boot/dts/bcm4708-buffalo-wzr-1166dhp.dts b/arch/arm/boot/dts/bcm4708-buffalo-wzr-1166dhp.dts new file mode 100644 index 000000000000..8e506269fa1a --- /dev/null +++ b/arch/arm/boot/dts/bcm4708-buffalo-wzr-1166dhp.dts @@ -0,0 +1,26 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT +/* + * Device Tree Bindigs for Buffalo WZR-1166DHP + * + * Copyright (C) 2022 SHIMAMOTO Takayoshi <takayoshi.shimamoto.360@gmail.com> + */ + +/dts-v1/; + +#include "bcm4708-buffalo-wzr-1166dhp-common.dtsi" + +/ { + compatible = "buffalo,wzr-1166dhp", "brcm,bcm4708"; + model = "Buffalo WZR-1166DHP"; + + chosen { + bootargs = "console=ttyS0,115200"; + }; + + memory@0 { + device_type = "memory"; + reg = <0x00000000 0x08000000>, + <0x88000000 0x18000000>; + }; + +}; diff --git a/arch/arm/boot/dts/bcm4708-buffalo-wzr-1166dhp2.dts b/arch/arm/boot/dts/bcm4708-buffalo-wzr-1166dhp2.dts new file mode 100644 index 000000000000..596129027074 --- /dev/null +++ b/arch/arm/boot/dts/bcm4708-buffalo-wzr-1166dhp2.dts @@ -0,0 +1,26 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT +/* + * Device Tree Bindigs for Buffalo WZR-1166DHP2 + * + * Copyright (C) 2022 SHIMAMOTO Takayoshi <takayoshi.shimamoto.360@gmail.com> + */ + +/dts-v1/; + +#include "bcm4708-buffalo-wzr-1166dhp-common.dtsi" + +/ { + compatible = "buffalo,wzr-1166dhp2", "brcm,bcm4708"; + model = "Buffalo WZR-1166DHP2"; + + chosen { + bootargs = "console=ttyS0,115200"; + }; + + memory@0 { + device_type = "memory"; + reg = <0x00000000 0x08000000>, + <0x88000000 0x08000000>; + }; + +}; diff --git a/arch/arm/boot/dts/bcm47094-asus-rt-ac88u.dts b/arch/arm/boot/dts/bcm47094-asus-rt-ac88u.dts index 82f9629f0abb..d8503758342b 100644 --- a/arch/arm/boot/dts/bcm47094-asus-rt-ac88u.dts +++ b/arch/arm/boot/dts/bcm47094-asus-rt-ac88u.dts @@ -1,6 +1,6 @@ // SPDX-License-Identifier: GPL-2.0-or-later OR MIT /* - * Copyright (C) 2021 Arınç ÃœNAL <arinc.unal@arinc9.com> + * Copyright (C) 2021-2022 Arınç ÃœNAL <arinc.unal@arinc9.com> */ /dts-v1/; @@ -25,6 +25,9 @@ nvram@1c080000 { compatible = "brcm,nvram"; reg = <0x1c080000 0x00180000>; + + et1macaddr: et1macaddr { + }; }; leds { @@ -177,9 +180,6 @@ dsa,member = <0 0>; ports { - #address-cells = <1>; - #size-cells = <0>; - port@0 { reg = <0>; label = "lan4"; @@ -208,6 +208,7 @@ sw0_p5: port@5 { reg = <5>; label = "extsw"; + phy-mode = "rgmii"; fixed-link { speed = <1000>; @@ -231,7 +232,6 @@ reg = <8>; ethernet = <&gmac2>; label = "cpu"; - status = "disabled"; fixed-link { speed = <1000>; @@ -241,6 +241,15 @@ }; }; +&gmac0 { + status = "disabled"; +}; + +&gmac1 { + nvmem-cells = <&et1macaddr>; + nvmem-cell-names = "mac-address"; +}; + &usb2 { vcc-gpio = <&chipcommon 9 GPIO_ACTIVE_HIGH>; }; diff --git a/arch/arm/boot/dts/bcm47622.dtsi b/arch/arm/boot/dts/bcm47622.dtsi new file mode 100644 index 000000000000..c016e12b7372 --- /dev/null +++ b/arch/arm/boot/dts/bcm47622.dtsi @@ -0,0 +1,126 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright 2022 Broadcom Ltd. + */ + +#include <dt-bindings/interrupt-controller/arm-gic.h> +#include <dt-bindings/interrupt-controller/irq.h> + +/ { + compatible = "brcm,bcm47622", "brcm,bcmbca"; + #address-cells = <1>; + #size-cells = <1>; + + interrupt-parent = <&gic>; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + CA7_0: cpu@0 { + device_type = "cpu"; + compatible = "arm,cortex-a7"; + reg = <0x0>; + next-level-cache = <&L2_0>; + enable-method = "psci"; + }; + + CA7_1: cpu@1 { + device_type = "cpu"; + compatible = "arm,cortex-a7"; + reg = <0x1>; + next-level-cache = <&L2_0>; + enable-method = "psci"; + }; + CA7_2: cpu@2 { + device_type = "cpu"; + compatible = "arm,cortex-a7"; + reg = <0x2>; + next-level-cache = <&L2_0>; + enable-method = "psci"; + }; + CA7_3: cpu@3 { + device_type = "cpu"; + compatible = "arm,cortex-a7"; + reg = <0x3>; + next-level-cache = <&L2_0>; + enable-method = "psci"; + }; + L2_0: l2-cache0 { + compatible = "cache"; + }; + }; + + timer { + compatible = "arm,armv7-timer"; + interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>; + arm,cpu-registers-not-fw-configured; + }; + + pmu: pmu { + compatible = "arm,cortex-a7-pmu"; + interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>; + interrupt-affinity = <&CA7_0>, <&CA7_1>, + <&CA7_2>, <&CA7_3>; + }; + + clocks: clocks { + periph_clk: periph-clk { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <200000000>; + }; + uart_clk: uart-clk { + compatible = "fixed-factor-clock"; + #clock-cells = <0>; + clocks = <&periph_clk>; + clock-div = <4>; + clock-mult = <1>; + }; + }; + + psci { + compatible = "arm,psci-0.2"; + method = "smc"; + cpu_off = <1>; + cpu_on = <2>; + }; + + axi@81000000 { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0x81000000 0x818000>; + + gic: interrupt-controller@1000 { + compatible = "arm,cortex-a7-gic"; + #interrupt-cells = <3>; + #address-cells = <0>; + interrupt-controller; + reg = <0x1000 0x1000>, + <0x2000 0x2000>; + }; + }; + + bus@ff800000 { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0xff800000 0x800000>; + + uart0: serial@12000 { + compatible = "arm,pl011", "arm,primecell"; + reg = <0x12000 0x1000>; + interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&uart_clk>, <&uart_clk>; + clock-names = "uartclk", "apb_pclk"; + status = "disabled"; + }; + }; +}; diff --git a/arch/arm/boot/dts/bcm53016-meraki-mr32.dts b/arch/arm/boot/dts/bcm53016-meraki-mr32.dts index 66c64a6ec414..daca63f25134 100644 --- a/arch/arm/boot/dts/bcm53016-meraki-mr32.dts +++ b/arch/arm/boot/dts/bcm53016-meraki-mr32.dts @@ -13,7 +13,7 @@ #include <dt-bindings/leds/common.h> / { - compatible = "meraki,mr32", "brcm,brcm53016", "brcm,bcm4708"; + compatible = "meraki,mr32", "brcm,bcm53016", "brcm,bcm4708"; model = "Meraki MR32"; chosen { diff --git a/arch/arm/boot/dts/bcm5301x.dtsi b/arch/arm/boot/dts/bcm5301x.dtsi index 603c700c706f..65f8a759f1e3 100644 --- a/arch/arm/boot/dts/bcm5301x.dtsi +++ b/arch/arm/boot/dts/bcm5301x.dtsi @@ -455,7 +455,7 @@ reg = <0x180 0x4>; }; - pinctrl: pin-controller@1c0 { + pinctrl: pinctrl@1c0 { compatible = "brcm,bcm4708-pinmux"; reg = <0x1c0 0x24>; reg-names = "cru_gpio_control"; diff --git a/arch/arm/boot/dts/bcm53340-ubnt-unifi-switch8.dts b/arch/arm/boot/dts/bcm53340-ubnt-unifi-switch8.dts index 2e7fda9b998c..975f854f652f 100644 --- a/arch/arm/boot/dts/bcm53340-ubnt-unifi-switch8.dts +++ b/arch/arm/boot/dts/bcm53340-ubnt-unifi-switch8.dts @@ -34,7 +34,7 @@ status = "okay"; bspi-sel = <0>; - flash: m25p80@0 { + flash: flash@0 { compatible = "m25p80"; reg = <0>; #address-cells = <1>; diff --git a/arch/arm/boot/dts/bcm947622.dts b/arch/arm/boot/dts/bcm947622.dts new file mode 100644 index 000000000000..6f083724ab8e --- /dev/null +++ b/arch/arm/boot/dts/bcm947622.dts @@ -0,0 +1,30 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright 2019 Broadcom Ltd. + */ + +/dts-v1/; + +#include "bcm47622.dtsi" + +/ { + model = "Broadcom BCM947622 Reference Board"; + compatible = "brcm,bcm947622", "brcm,bcm47622", "brcm,bcmbca"; + + aliases { + serial0 = &uart0; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + memory@0 { + device_type = "memory"; + reg = <0x0 0x08000000>; + }; +}; + +&uart0 { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/bcm953012er.dts b/arch/arm/boot/dts/bcm953012er.dts index 52feca0fb906..dd63a148a16b 100644 --- a/arch/arm/boot/dts/bcm953012er.dts +++ b/arch/arm/boot/dts/bcm953012er.dts @@ -37,7 +37,7 @@ / { model = "NorthStar Enterprise Router (BCM953012ER)"; - compatible = "brcm,bcm953012er", "brcm,brcm53012", "brcm,bcm4708"; + compatible = "brcm,bcm953012er", "brcm,bcm53012", "brcm,bcm4708"; memory@0 { device_type = "memory"; diff --git a/arch/arm/boot/dts/bcm953012hr.dts b/arch/arm/boot/dts/bcm953012hr.dts index 9140be7ec053..b070b69466bd 100644 --- a/arch/arm/boot/dts/bcm953012hr.dts +++ b/arch/arm/boot/dts/bcm953012hr.dts @@ -37,7 +37,7 @@ / { model = "NorthStar HR (BCM953012HR)"; - compatible = "brcm,bcm953012hr", "brcm,brcm53012", "brcm,bcm4708"; + compatible = "brcm,bcm953012hr", "brcm,bcm53012", "brcm,bcm4708"; aliases { ethernet0 = &gmac0; diff --git a/arch/arm/boot/dts/bcm953012k.dts b/arch/arm/boot/dts/bcm953012k.dts index de40bd59a5fa..f1e6bcaa1edd 100644 --- a/arch/arm/boot/dts/bcm953012k.dts +++ b/arch/arm/boot/dts/bcm953012k.dts @@ -36,7 +36,7 @@ / { model = "NorthStar SVK (BCM953012K)"; - compatible = "brcm,bcm953012k", "brcm,brcm53012", "brcm,bcm4708"; + compatible = "brcm,bcm953012k", "brcm,bcm53012", "brcm,bcm4708"; aliases { serial0 = &uart0; diff --git a/arch/arm/boot/dts/bcm958522er.dts b/arch/arm/boot/dts/bcm958522er.dts index 60376b62cd5f..15f023656df0 100644 --- a/arch/arm/boot/dts/bcm958522er.dts +++ b/arch/arm/boot/dts/bcm958522er.dts @@ -136,7 +136,7 @@ &qspi { status = "okay"; bspi-sel = <0>; - flash: m25p80@0 { + flash: flash@0 { #address-cells = <1>; #size-cells = <1>; compatible = "m25p80"; diff --git a/arch/arm/boot/dts/bcm958525er.dts b/arch/arm/boot/dts/bcm958525er.dts index 8eeb319f5b54..9b9c225a1fb3 100644 --- a/arch/arm/boot/dts/bcm958525er.dts +++ b/arch/arm/boot/dts/bcm958525er.dts @@ -136,7 +136,7 @@ &qspi { status = "okay"; bspi-sel = <0>; - flash: m25p80@0 { + flash: flash@0 { #address-cells = <1>; #size-cells = <1>; compatible = "m25p80"; diff --git a/arch/arm/boot/dts/bcm958525xmc.dts b/arch/arm/boot/dts/bcm958525xmc.dts index dc86d5a91292..ca9311452739 100644 --- a/arch/arm/boot/dts/bcm958525xmc.dts +++ b/arch/arm/boot/dts/bcm958525xmc.dts @@ -152,7 +152,7 @@ &qspi { status = "okay"; bspi-sel = <0>; - flash: m25p80@0 { + flash: flash@0 { #address-cells = <1>; #size-cells = <1>; compatible = "m25p80"; diff --git a/arch/arm/boot/dts/bcm958622hr.dts b/arch/arm/boot/dts/bcm958622hr.dts index c457e53d886e..9db3c851451a 100644 --- a/arch/arm/boot/dts/bcm958622hr.dts +++ b/arch/arm/boot/dts/bcm958622hr.dts @@ -140,7 +140,7 @@ &qspi { status = "okay"; bspi-sel = <0>; - flash: m25p80@0 { + flash: flash@0 { #address-cells = <1>; #size-cells = <1>; compatible = "m25p80"; diff --git a/arch/arm/boot/dts/bcm958623hr.dts b/arch/arm/boot/dts/bcm958623hr.dts index c06871915a1c..32786e7c4e12 100644 --- a/arch/arm/boot/dts/bcm958623hr.dts +++ b/arch/arm/boot/dts/bcm958623hr.dts @@ -144,7 +144,7 @@ &qspi { status = "okay"; bspi-sel = <0>; - flash: m25p80@0 { + flash: flash@0 { #address-cells = <1>; #size-cells = <1>; compatible = "m25p80"; diff --git a/arch/arm/boot/dts/bcm958625hr.dts b/arch/arm/boot/dts/bcm958625hr.dts index b22fc6624ae4..74263d98de73 100644 --- a/arch/arm/boot/dts/bcm958625hr.dts +++ b/arch/arm/boot/dts/bcm958625hr.dts @@ -151,7 +151,7 @@ &qspi { status = "okay"; bspi-sel = <0>; - flash: m25p80@0 { + flash: flash@0 { #address-cells = <1>; #size-cells = <1>; compatible = "m25p80"; diff --git a/arch/arm/boot/dts/bcm958625k.dts b/arch/arm/boot/dts/bcm958625k.dts index 0183f8965a74..69ebc7a913a7 100644 --- a/arch/arm/boot/dts/bcm958625k.dts +++ b/arch/arm/boot/dts/bcm958625k.dts @@ -155,7 +155,7 @@ &qspi { status = "okay"; bspi-sel = <0>; - flash: m25p80@0 { + flash: flash@0 { #address-cells = <1>; #size-cells = <1>; compatible = "m25p80"; diff --git a/arch/arm/boot/dts/bcm988312hr.dts b/arch/arm/boot/dts/bcm988312hr.dts index 007e34715956..e96bc3f2d5cf 100644 --- a/arch/arm/boot/dts/bcm988312hr.dts +++ b/arch/arm/boot/dts/bcm988312hr.dts @@ -140,7 +140,7 @@ &qspi { status = "okay"; bspi-sel = <0>; - flash: m25p80@0 { + flash: flash@0 { #address-cells = <1>; #size-cells = <1>; compatible = "m25p80"; diff --git a/arch/arm/boot/dts/dm814x.dtsi b/arch/arm/boot/dts/dm814x.dtsi index 7702e048e110..a92630113f57 100644 --- a/arch/arm/boot/dts/dm814x.dtsi +++ b/arch/arm/boot/dts/dm814x.dtsi @@ -167,8 +167,11 @@ interrupts = <17>; interrupt-names = "glue"; #dma-cells = <2>; + /* For backwards compatibility: */ #dma-channels = <30>; + dma-channels = <30>; #dma-requests = <256>; + dma-requests = <256>; }; }; diff --git a/arch/arm/boot/dts/dm816x.dtsi b/arch/arm/boot/dts/dm816x.dtsi index a9e7274806f4..eb0a95da94b2 100644 --- a/arch/arm/boot/dts/dm816x.dtsi +++ b/arch/arm/boot/dts/dm816x.dtsi @@ -655,8 +655,11 @@ interrupts = <17>; interrupt-names = "glue"; #dma-cells = <2>; + /* For backwards compatibility: */ #dma-channels = <30>; + dma-channels = <30>; #dma-requests = <256>; + dma-requests = <256>; }; }; diff --git a/arch/arm/boot/dts/dove-cubox.dts b/arch/arm/boot/dts/dove-cubox.dts index 3e1584e787ae..2639b9fe0ab4 100644 --- a/arch/arm/boot/dts/dove-cubox.dts +++ b/arch/arm/boot/dts/dove-cubox.dts @@ -127,7 +127,7 @@ status = "okay"; /* spi0.0: 4M Flash Winbond W25Q32BV */ - spi-flash@0 { + flash@0 { compatible = "st,w25q32"; spi-max-frequency = <20000000>; reg = <0>; diff --git a/arch/arm/boot/dts/dove-d2plug.dts b/arch/arm/boot/dts/dove-d2plug.dts index 273f12ca2512..a0e8996c2ffd 100644 --- a/arch/arm/boot/dts/dove-d2plug.dts +++ b/arch/arm/boot/dts/dove-d2plug.dts @@ -62,7 +62,7 @@ status = "okay"; /* spi0.0: 4M Flash Macronix MX25L3205D */ - spi-flash@0 { + flash@0 { compatible = "st,m25l3205d"; spi-max-frequency = <20000000>; reg = <0>; diff --git a/arch/arm/boot/dts/dove-d3plug.dts b/arch/arm/boot/dts/dove-d3plug.dts index 826026c28f90..1e81d1b97055 100644 --- a/arch/arm/boot/dts/dove-d3plug.dts +++ b/arch/arm/boot/dts/dove-d3plug.dts @@ -79,7 +79,7 @@ status = "okay"; /* spi0.0: 2M Flash Macronix MX25L1605D */ - spi-flash@0 { + flash@0 { compatible = "st,m25l1605d"; spi-max-frequency = <86000000>; reg = <0>; diff --git a/arch/arm/boot/dts/dove-dove-db.dts b/arch/arm/boot/dts/dove-dove-db.dts index 1754a62e014e..c1912dc6bfc3 100644 --- a/arch/arm/boot/dts/dove-dove-db.dts +++ b/arch/arm/boot/dts/dove-dove-db.dts @@ -27,7 +27,7 @@ status = "okay"; /* spi0.0: 4M Flash ST-M25P32-VMF6P */ - spi-flash@0 { + flash@0 { compatible = "st,m25p32"; spi-max-frequency = <20000000>; reg = <0>; diff --git a/arch/arm/boot/dts/dra7-evm-common.dtsi b/arch/arm/boot/dts/dra7-evm-common.dtsi index 0f71a9f37a72..68c43eb12c1a 100644 --- a/arch/arm/boot/dts/dra7-evm-common.dtsi +++ b/arch/arm/boot/dts/dra7-evm-common.dtsi @@ -135,7 +135,7 @@ status = "okay"; spi-max-frequency = <76800000>; - m25p80@0 { + flash@0 { compatible = "s25fl256s1"; spi-max-frequency = <76800000>; reg = <0>; diff --git a/arch/arm/boot/dts/dra72-evm-common.dtsi b/arch/arm/boot/dts/dra72-evm-common.dtsi index f12825268188..8948e10dbeb8 100644 --- a/arch/arm/boot/dts/dra72-evm-common.dtsi +++ b/arch/arm/boot/dts/dra72-evm-common.dtsi @@ -474,7 +474,7 @@ status = "okay"; spi-max-frequency = <76800000>; - m25p80@0 { + flash@0 { compatible = "s25fl256s1"; spi-max-frequency = <76800000>; reg = <0>; diff --git a/arch/arm/boot/dts/dra76-evm.dts b/arch/arm/boot/dts/dra76-evm.dts index e2b7fcb061cf..57868ac60d29 100644 --- a/arch/arm/boot/dts/dra76-evm.dts +++ b/arch/arm/boot/dts/dra76-evm.dts @@ -511,7 +511,7 @@ &qspi { spi-max-frequency = <96000000>; - m25p80@0 { + flash@0 { spi-max-frequency = <96000000>; }; }; diff --git a/arch/arm/boot/dts/dra7xx-clocks.dtsi b/arch/arm/boot/dts/dra7xx-clocks.dtsi index 2365554eef3c..04a7a6d1d529 100644 --- a/arch/arm/boot/dts/dra7xx-clocks.dtsi +++ b/arch/arm/boot/dts/dra7xx-clocks.dtsi @@ -5,210 +5,244 @@ * Copyright (C) 2013 Texas Instruments, Inc. */ &cm_core_aon_clocks { - atl_clkin0_ck: atl_clkin0_ck { + atl_clkin0_ck: clock-atl-clkin0 { #clock-cells = <0>; compatible = "ti,dra7-atl-clock"; + clock-output-names = "atl_clkin0_ck"; clocks = <&atl_clkctrl DRA7_ATL_ATL_CLKCTRL 26>; }; - atl_clkin1_ck: atl_clkin1_ck { + atl_clkin1_ck: clock-atl-clkin1 { #clock-cells = <0>; compatible = "ti,dra7-atl-clock"; + clock-output-names = "atl_clkin1_ck"; clocks = <&atl_clkctrl DRA7_ATL_ATL_CLKCTRL 26>; }; - atl_clkin2_ck: atl_clkin2_ck { + atl_clkin2_ck: clock-atl-clkin2 { #clock-cells = <0>; compatible = "ti,dra7-atl-clock"; + clock-output-names = "atl_clkin2_ck"; clocks = <&atl_clkctrl DRA7_ATL_ATL_CLKCTRL 26>; }; - atl_clkin3_ck: atl_clkin3_ck { + atl_clkin3_ck: clock-atl-clkin3 { #clock-cells = <0>; compatible = "ti,dra7-atl-clock"; + clock-output-names = "atl_clkin3_ck"; clocks = <&atl_clkctrl DRA7_ATL_ATL_CLKCTRL 26>; }; - hdmi_clkin_ck: hdmi_clkin_ck { + hdmi_clkin_ck: clock-hdmi-clkin { #clock-cells = <0>; compatible = "fixed-clock"; + clock-output-names = "hdmi_clkin_ck"; clock-frequency = <0>; }; - mlb_clkin_ck: mlb_clkin_ck { + mlb_clkin_ck: clock-mlb-clkin { #clock-cells = <0>; compatible = "fixed-clock"; + clock-output-names = "mlb_clkin_ck"; clock-frequency = <0>; }; - mlbp_clkin_ck: mlbp_clkin_ck { + mlbp_clkin_ck: clock-mlbp-clkin { #clock-cells = <0>; compatible = "fixed-clock"; + clock-output-names = "mlbp_clkin_ck"; clock-frequency = <0>; }; - pciesref_acs_clk_ck: pciesref_acs_clk_ck { + pciesref_acs_clk_ck: clock-pciesref-acs { #clock-cells = <0>; compatible = "fixed-clock"; + clock-output-names = "pciesref_acs_clk_ck"; clock-frequency = <100000000>; }; - ref_clkin0_ck: ref_clkin0_ck { + ref_clkin0_ck: clock-ref-clkin0 { #clock-cells = <0>; compatible = "fixed-clock"; + clock-output-names = "ref_clkin0_ck"; clock-frequency = <0>; }; - ref_clkin1_ck: ref_clkin1_ck { + ref_clkin1_ck: clock-ref-clkin1 { #clock-cells = <0>; compatible = "fixed-clock"; + clock-output-names = "ref_clkin1_ck"; clock-frequency = <0>; }; - ref_clkin2_ck: ref_clkin2_ck { + ref_clkin2_ck: clock-ref-clkin2 { #clock-cells = <0>; compatible = "fixed-clock"; + clock-output-names = "ref_clkin2_ck"; clock-frequency = <0>; }; - ref_clkin3_ck: ref_clkin3_ck { + ref_clkin3_ck: clock-ref-clkin3 { #clock-cells = <0>; compatible = "fixed-clock"; + clock-output-names = "ref_clkin3_ck"; clock-frequency = <0>; }; - rmii_clk_ck: rmii_clk_ck { + rmii_clk_ck: clock-rmii { #clock-cells = <0>; compatible = "fixed-clock"; + clock-output-names = "rmii_clk_ck"; clock-frequency = <0>; }; - sdvenc_clkin_ck: sdvenc_clkin_ck { + sdvenc_clkin_ck: clock-sdvenc-clkin { #clock-cells = <0>; compatible = "fixed-clock"; + clock-output-names = "sdvenc_clkin_ck"; clock-frequency = <0>; }; - secure_32k_clk_src_ck: secure_32k_clk_src_ck { + secure_32k_clk_src_ck: clock-secure-32k-clk-src { #clock-cells = <0>; compatible = "fixed-clock"; + clock-output-names = "secure_32k_clk_src_ck"; clock-frequency = <32768>; }; - sys_clk32_crystal_ck: sys_clk32_crystal_ck { + sys_clk32_crystal_ck: clock-sys-clk32-crystal { #clock-cells = <0>; compatible = "fixed-clock"; + clock-output-names = "sys_clk32_crystal_ck"; clock-frequency = <32768>; }; - sys_clk32_pseudo_ck: sys_clk32_pseudo_ck { + sys_clk32_pseudo_ck: clock-sys-clk32-pseudo { #clock-cells = <0>; compatible = "fixed-factor-clock"; + clock-output-names = "sys_clk32_pseudo_ck"; clocks = <&sys_clkin1>; clock-mult = <1>; clock-div = <610>; }; - virt_12000000_ck: virt_12000000_ck { + virt_12000000_ck: clock-virt-12000000 { #clock-cells = <0>; compatible = "fixed-clock"; + clock-output-names = "virt_12000000_ck"; clock-frequency = <12000000>; }; - virt_13000000_ck: virt_13000000_ck { + virt_13000000_ck: clock-virt-13000000 { #clock-cells = <0>; compatible = "fixed-clock"; + clock-output-names = "virt_13000000_ck"; clock-frequency = <13000000>; }; - virt_16800000_ck: virt_16800000_ck { + virt_16800000_ck: clock-virt-16800000 { #clock-cells = <0>; compatible = "fixed-clock"; + clock-output-names = "virt_16800000_ck"; clock-frequency = <16800000>; }; - virt_19200000_ck: virt_19200000_ck { + virt_19200000_ck: clock-virt-19200000 { #clock-cells = <0>; compatible = "fixed-clock"; + clock-output-names = "virt_19200000_ck"; clock-frequency = <19200000>; }; - virt_20000000_ck: virt_20000000_ck { + virt_20000000_ck: clock-virt-20000000 { #clock-cells = <0>; compatible = "fixed-clock"; + clock-output-names = "virt_20000000_ck"; clock-frequency = <20000000>; }; - virt_26000000_ck: virt_26000000_ck { + virt_26000000_ck: clock-virt-26000000 { #clock-cells = <0>; compatible = "fixed-clock"; + clock-output-names = "virt_26000000_ck"; clock-frequency = <26000000>; }; - virt_27000000_ck: virt_27000000_ck { + virt_27000000_ck: clock-virt-27000000 { #clock-cells = <0>; compatible = "fixed-clock"; + clock-output-names = "virt_27000000_ck"; clock-frequency = <27000000>; }; - virt_38400000_ck: virt_38400000_ck { + virt_38400000_ck: clock-virt-38400000 { #clock-cells = <0>; compatible = "fixed-clock"; + clock-output-names = "virt_38400000_ck"; clock-frequency = <38400000>; }; - sys_clkin2: sys_clkin2 { + sys_clkin2: clock-sys-clkin2 { #clock-cells = <0>; compatible = "fixed-clock"; + clock-output-names = "sys_clkin2"; clock-frequency = <22579200>; }; - usb_otg_clkin_ck: usb_otg_clkin_ck { + usb_otg_clkin_ck: clock-usb-otg-clkin { #clock-cells = <0>; compatible = "fixed-clock"; + clock-output-names = "usb_otg_clkin_ck"; clock-frequency = <0>; }; - video1_clkin_ck: video1_clkin_ck { + video1_clkin_ck: clock-video1-clkin { #clock-cells = <0>; compatible = "fixed-clock"; + clock-output-names = "video1_clkin_ck"; clock-frequency = <0>; }; - video1_m2_clkin_ck: video1_m2_clkin_ck { + video1_m2_clkin_ck: clock-video1-m2-clkin { #clock-cells = <0>; compatible = "fixed-clock"; + clock-output-names = "video1_m2_clkin_ck"; clock-frequency = <0>; }; - video2_clkin_ck: video2_clkin_ck { + video2_clkin_ck: clock-video2-clkin { #clock-cells = <0>; compatible = "fixed-clock"; + clock-output-names = "video2_clkin_ck"; clock-frequency = <0>; }; - video2_m2_clkin_ck: video2_m2_clkin_ck { + video2_m2_clkin_ck: clock-video2-m2-clkin { #clock-cells = <0>; compatible = "fixed-clock"; + clock-output-names = "video2_m2_clkin_ck"; clock-frequency = <0>; }; - dpll_abe_ck: dpll_abe_ck@1e0 { + dpll_abe_ck: clock@1e0 { #clock-cells = <0>; compatible = "ti,omap4-dpll-m4xen-clock"; + clock-output-names = "dpll_abe_ck"; clocks = <&abe_dpll_clk_mux>, <&abe_dpll_bypass_clk_mux>; reg = <0x01e0>, <0x01e4>, <0x01ec>, <0x01e8>; }; - dpll_abe_x2_ck: dpll_abe_x2_ck { + dpll_abe_x2_ck: clock-dpll-abe-x2 { #clock-cells = <0>; compatible = "ti,omap4-dpll-x2-clock"; + clock-output-names = "dpll_abe_x2_ck"; clocks = <&dpll_abe_ck>; }; - dpll_abe_m2x2_ck: dpll_abe_m2x2_ck@1f0 { + dpll_abe_m2x2_ck: clock-dpll-abe-m2x2-8@1f0 { #clock-cells = <0>; compatible = "ti,divider-clock"; + clock-output-names = "dpll_abe_m2x2_ck"; clocks = <&dpll_abe_x2_ck>; ti,max-div = <31>; ti,autoidle-shift = <8>; @@ -217,18 +251,20 @@ ti,invert-autoidle-bit; }; - abe_clk: abe_clk@108 { + abe_clk: clock-abe@108 { #clock-cells = <0>; compatible = "ti,divider-clock"; + clock-output-names = "abe_clk"; clocks = <&dpll_abe_m2x2_ck>; ti,max-div = <4>; reg = <0x0108>; ti,index-power-of-two; }; - dpll_abe_m2_ck: dpll_abe_m2_ck@1f0 { + dpll_abe_m2_ck: clock-dpll-abe-m2-8@1f0 { #clock-cells = <0>; compatible = "ti,divider-clock"; + clock-output-names = "dpll_abe_m2_ck"; clocks = <&dpll_abe_ck>; ti,max-div = <31>; ti,autoidle-shift = <8>; @@ -237,9 +273,10 @@ ti,invert-autoidle-bit; }; - dpll_abe_m3x2_ck: dpll_abe_m3x2_ck@1f4 { + dpll_abe_m3x2_ck: clock-dpll-abe-m3x2-8@1f4 { #clock-cells = <0>; compatible = "ti,divider-clock"; + clock-output-names = "dpll_abe_m3x2_ck"; clocks = <&dpll_abe_x2_ck>; ti,max-div = <31>; ti,autoidle-shift = <8>; @@ -248,30 +285,34 @@ ti,invert-autoidle-bit; }; - dpll_core_byp_mux: dpll_core_byp_mux@12c { + dpll_core_byp_mux: clock-dpll-core-byp-mux-23@12c { #clock-cells = <0>; compatible = "ti,mux-clock"; + clock-output-names = "dpll_core_byp_mux"; clocks = <&sys_clkin1>, <&dpll_abe_m3x2_ck>; ti,bit-shift = <23>; reg = <0x012c>; }; - dpll_core_ck: dpll_core_ck@120 { + dpll_core_ck: clock@120 { #clock-cells = <0>; compatible = "ti,omap4-dpll-core-clock"; + clock-output-names = "dpll_core_ck"; clocks = <&sys_clkin1>, <&dpll_core_byp_mux>; reg = <0x0120>, <0x0124>, <0x012c>, <0x0128>; }; - dpll_core_x2_ck: dpll_core_x2_ck { + dpll_core_x2_ck: clock-dpll-core-x2 { #clock-cells = <0>; compatible = "ti,omap4-dpll-x2-clock"; + clock-output-names = "dpll_core_x2_ck"; clocks = <&dpll_core_ck>; }; - dpll_core_h12x2_ck: dpll_core_h12x2_ck@13c { + dpll_core_h12x2_ck: clock-dpll-core-h12x2-8@13c { #clock-cells = <0>; compatible = "ti,divider-clock"; + clock-output-names = "dpll_core_h12x2_ck"; clocks = <&dpll_core_x2_ck>; ti,max-div = <63>; ti,autoidle-shift = <8>; @@ -280,24 +321,27 @@ ti,invert-autoidle-bit; }; - mpu_dpll_hs_clk_div: mpu_dpll_hs_clk_div { + mpu_dpll_hs_clk_div: clock-mpu-dpll-hs-clk-div { #clock-cells = <0>; compatible = "fixed-factor-clock"; + clock-output-names = "mpu_dpll_hs_clk_div"; clocks = <&dpll_core_h12x2_ck>; clock-mult = <1>; clock-div = <1>; }; - dpll_mpu_ck: dpll_mpu_ck@160 { + dpll_mpu_ck: clock@160 { #clock-cells = <0>; compatible = "ti,omap5-mpu-dpll-clock"; + clock-output-names = "dpll_mpu_ck"; clocks = <&sys_clkin1>, <&mpu_dpll_hs_clk_div>; reg = <0x0160>, <0x0164>, <0x016c>, <0x0168>; }; - dpll_mpu_m2_ck: dpll_mpu_m2_ck@170 { + dpll_mpu_m2_ck: clock-dpll-mpu-m2-8@170 { #clock-cells = <0>; compatible = "ti,divider-clock"; + clock-output-names = "dpll_mpu_m2_ck"; clocks = <&dpll_mpu_ck>; ti,max-div = <31>; ti,autoidle-shift = <8>; @@ -306,42 +350,47 @@ ti,invert-autoidle-bit; }; - mpu_dclk_div: mpu_dclk_div { + mpu_dclk_div: clock-mpu-dclk-div { #clock-cells = <0>; compatible = "fixed-factor-clock"; + clock-output-names = "mpu_dclk_div"; clocks = <&dpll_mpu_m2_ck>; clock-mult = <1>; clock-div = <1>; }; - dsp_dpll_hs_clk_div: dsp_dpll_hs_clk_div { + dsp_dpll_hs_clk_div: clock-dsp-dpll-hs-clk-div { #clock-cells = <0>; compatible = "fixed-factor-clock"; + clock-output-names = "dsp_dpll_hs_clk_div"; clocks = <&dpll_core_h12x2_ck>; clock-mult = <1>; clock-div = <1>; }; - dpll_dsp_byp_mux: dpll_dsp_byp_mux@240 { + dpll_dsp_byp_mux: clock-dpll-dsp-byp-mux-23@240 { #clock-cells = <0>; compatible = "ti,mux-clock"; + clock-output-names = "dpll_dsp_byp_mux"; clocks = <&sys_clkin1>, <&dsp_dpll_hs_clk_div>; ti,bit-shift = <23>; reg = <0x0240>; }; - dpll_dsp_ck: dpll_dsp_ck@234 { + dpll_dsp_ck: clock@234 { #clock-cells = <0>; compatible = "ti,omap4-dpll-clock"; + clock-output-names = "dpll_dsp_ck"; clocks = <&sys_clkin1>, <&dpll_dsp_byp_mux>; reg = <0x0234>, <0x0238>, <0x0240>, <0x023c>; assigned-clocks = <&dpll_dsp_ck>; assigned-clock-rates = <600000000>; }; - dpll_dsp_m2_ck: dpll_dsp_m2_ck@244 { + dpll_dsp_m2_ck: clock-dpll-dsp-m2-8@244 { #clock-cells = <0>; compatible = "ti,divider-clock"; + clock-output-names = "dpll_dsp_m2_ck"; clocks = <&dpll_dsp_ck>; ti,max-div = <31>; ti,autoidle-shift = <8>; @@ -352,34 +401,38 @@ assigned-clock-rates = <600000000>; }; - iva_dpll_hs_clk_div: iva_dpll_hs_clk_div { + iva_dpll_hs_clk_div: clock-iva-dpll-hs-clk-div { #clock-cells = <0>; compatible = "fixed-factor-clock"; + clock-output-names = "iva_dpll_hs_clk_div"; clocks = <&dpll_core_h12x2_ck>; clock-mult = <1>; clock-div = <1>; }; - dpll_iva_byp_mux: dpll_iva_byp_mux@1ac { + dpll_iva_byp_mux: clock-dpll-iva-byp-mux-23@1ac { #clock-cells = <0>; compatible = "ti,mux-clock"; + clock-output-names = "dpll_iva_byp_mux"; clocks = <&sys_clkin1>, <&iva_dpll_hs_clk_div>; ti,bit-shift = <23>; reg = <0x01ac>; }; - dpll_iva_ck: dpll_iva_ck@1a0 { + dpll_iva_ck: clock@1a0 { #clock-cells = <0>; compatible = "ti,omap4-dpll-clock"; + clock-output-names = "dpll_iva_ck"; clocks = <&sys_clkin1>, <&dpll_iva_byp_mux>; reg = <0x01a0>, <0x01a4>, <0x01ac>, <0x01a8>; assigned-clocks = <&dpll_iva_ck>; assigned-clock-rates = <1165000000>; }; - dpll_iva_m2_ck: dpll_iva_m2_ck@1b0 { + dpll_iva_m2_ck: clock-dpll-iva-m2-8@1b0 { #clock-cells = <0>; compatible = "ti,divider-clock"; + clock-output-names = "dpll_iva_m2_ck"; clocks = <&dpll_iva_ck>; ti,max-div = <31>; ti,autoidle-shift = <8>; @@ -390,34 +443,38 @@ assigned-clock-rates = <388333334>; }; - iva_dclk: iva_dclk { + iva_dclk: clock-iva-dclk { #clock-cells = <0>; compatible = "fixed-factor-clock"; + clock-output-names = "iva_dclk"; clocks = <&dpll_iva_m2_ck>; clock-mult = <1>; clock-div = <1>; }; - dpll_gpu_byp_mux: dpll_gpu_byp_mux@2e4 { + dpll_gpu_byp_mux: clock-dpll-gpu-byp-mux-23@2e4 { #clock-cells = <0>; compatible = "ti,mux-clock"; + clock-output-names = "dpll_gpu_byp_mux"; clocks = <&sys_clkin1>, <&dpll_abe_m3x2_ck>; ti,bit-shift = <23>; reg = <0x02e4>; }; - dpll_gpu_ck: dpll_gpu_ck@2d8 { + dpll_gpu_ck: clock@2d8 { #clock-cells = <0>; compatible = "ti,omap4-dpll-clock"; + clock-output-names = "dpll_gpu_ck"; clocks = <&sys_clkin1>, <&dpll_gpu_byp_mux>; reg = <0x02d8>, <0x02dc>, <0x02e4>, <0x02e0>; assigned-clocks = <&dpll_gpu_ck>; assigned-clock-rates = <1277000000>; }; - dpll_gpu_m2_ck: dpll_gpu_m2_ck@2e8 { + dpll_gpu_m2_ck: clock-dpll-gpu-m2-8@2e8 { #clock-cells = <0>; compatible = "ti,divider-clock"; + clock-output-names = "dpll_gpu_m2_ck"; clocks = <&dpll_gpu_ck>; ti,max-div = <31>; ti,autoidle-shift = <8>; @@ -428,9 +485,10 @@ assigned-clock-rates = <425666667>; }; - dpll_core_m2_ck: dpll_core_m2_ck@130 { + dpll_core_m2_ck: clock-dpll-core-m2-8@130 { #clock-cells = <0>; compatible = "ti,divider-clock"; + clock-output-names = "dpll_core_m2_ck"; clocks = <&dpll_core_ck>; ti,max-div = <31>; ti,autoidle-shift = <8>; @@ -439,32 +497,36 @@ ti,invert-autoidle-bit; }; - core_dpll_out_dclk_div: core_dpll_out_dclk_div { + core_dpll_out_dclk_div: clock-core-dpll-out-dclk-div { #clock-cells = <0>; compatible = "fixed-factor-clock"; + clock-output-names = "core_dpll_out_dclk_div"; clocks = <&dpll_core_m2_ck>; clock-mult = <1>; clock-div = <1>; }; - dpll_ddr_byp_mux: dpll_ddr_byp_mux@21c { + dpll_ddr_byp_mux: clock-dpll-ddr-byp-mux-23@21c { #clock-cells = <0>; compatible = "ti,mux-clock"; + clock-output-names = "dpll_ddr_byp_mux"; clocks = <&sys_clkin1>, <&dpll_abe_m3x2_ck>; ti,bit-shift = <23>; reg = <0x021c>; }; - dpll_ddr_ck: dpll_ddr_ck@210 { + dpll_ddr_ck: clock@210 { #clock-cells = <0>; compatible = "ti,omap4-dpll-clock"; + clock-output-names = "dpll_ddr_ck"; clocks = <&sys_clkin1>, <&dpll_ddr_byp_mux>; reg = <0x0210>, <0x0214>, <0x021c>, <0x0218>; }; - dpll_ddr_m2_ck: dpll_ddr_m2_ck@220 { + dpll_ddr_m2_ck: clock-dpll-ddr-m2-8@220 { #clock-cells = <0>; compatible = "ti,divider-clock"; + clock-output-names = "dpll_ddr_m2_ck"; clocks = <&dpll_ddr_ck>; ti,max-div = <31>; ti,autoidle-shift = <8>; @@ -473,24 +535,27 @@ ti,invert-autoidle-bit; }; - dpll_gmac_byp_mux: dpll_gmac_byp_mux@2b4 { + dpll_gmac_byp_mux: clock-dpll-gmac-byp-mux-23@2b4 { #clock-cells = <0>; compatible = "ti,mux-clock"; + clock-output-names = "dpll_gmac_byp_mux"; clocks = <&sys_clkin1>, <&dpll_abe_m3x2_ck>; ti,bit-shift = <23>; reg = <0x02b4>; }; - dpll_gmac_ck: dpll_gmac_ck@2a8 { + dpll_gmac_ck: clock@2a8 { #clock-cells = <0>; compatible = "ti,omap4-dpll-clock"; + clock-output-names = "dpll_gmac_ck"; clocks = <&sys_clkin1>, <&dpll_gmac_byp_mux>; reg = <0x02a8>, <0x02ac>, <0x02b4>, <0x02b0>; }; - dpll_gmac_m2_ck: dpll_gmac_m2_ck@2b8 { + dpll_gmac_m2_ck: clock-dpll-gmac-m2-8@2b8 { #clock-cells = <0>; compatible = "ti,divider-clock"; + clock-output-names = "dpll_gmac_m2_ck"; clocks = <&dpll_gmac_ck>; ti,max-div = <31>; ti,autoidle-shift = <8>; @@ -499,72 +564,81 @@ ti,invert-autoidle-bit; }; - video2_dclk_div: video2_dclk_div { + video2_dclk_div: clock-video2-dclk-div { #clock-cells = <0>; compatible = "fixed-factor-clock"; + clock-output-names = "video2_dclk_div"; clocks = <&video2_m2_clkin_ck>; clock-mult = <1>; clock-div = <1>; }; - video1_dclk_div: video1_dclk_div { + video1_dclk_div: clock-video1-dclk-div { #clock-cells = <0>; compatible = "fixed-factor-clock"; + clock-output-names = "video1_dclk_div"; clocks = <&video1_m2_clkin_ck>; clock-mult = <1>; clock-div = <1>; }; - hdmi_dclk_div: hdmi_dclk_div { + hdmi_dclk_div: clock-hdmi-dclk-div { #clock-cells = <0>; compatible = "fixed-factor-clock"; + clock-output-names = "hdmi_dclk_div"; clocks = <&hdmi_clkin_ck>; clock-mult = <1>; clock-div = <1>; }; - per_dpll_hs_clk_div: per_dpll_hs_clk_div { + per_dpll_hs_clk_div: clock-per-dpll-hs-clk-div { #clock-cells = <0>; compatible = "fixed-factor-clock"; + clock-output-names = "per_dpll_hs_clk_div"; clocks = <&dpll_abe_m3x2_ck>; clock-mult = <1>; clock-div = <2>; }; - usb_dpll_hs_clk_div: usb_dpll_hs_clk_div { + usb_dpll_hs_clk_div: clock-usb-dpll-hs-clk-div { #clock-cells = <0>; compatible = "fixed-factor-clock"; + clock-output-names = "usb_dpll_hs_clk_div"; clocks = <&dpll_abe_m3x2_ck>; clock-mult = <1>; clock-div = <3>; }; - eve_dpll_hs_clk_div: eve_dpll_hs_clk_div { + eve_dpll_hs_clk_div: clock-eve-dpll-hs-clk-div { #clock-cells = <0>; compatible = "fixed-factor-clock"; + clock-output-names = "eve_dpll_hs_clk_div"; clocks = <&dpll_core_h12x2_ck>; clock-mult = <1>; clock-div = <1>; }; - dpll_eve_byp_mux: dpll_eve_byp_mux@290 { + dpll_eve_byp_mux: clock-dpll-eve-byp-mux-23@290 { #clock-cells = <0>; compatible = "ti,mux-clock"; + clock-output-names = "dpll_eve_byp_mux"; clocks = <&sys_clkin1>, <&eve_dpll_hs_clk_div>; ti,bit-shift = <23>; reg = <0x0290>; }; - dpll_eve_ck: dpll_eve_ck@284 { + dpll_eve_ck: clock@284 { #clock-cells = <0>; compatible = "ti,omap4-dpll-clock"; + clock-output-names = "dpll_eve_ck"; clocks = <&sys_clkin1>, <&dpll_eve_byp_mux>; reg = <0x0284>, <0x0288>, <0x0290>, <0x028c>; }; - dpll_eve_m2_ck: dpll_eve_m2_ck@294 { + dpll_eve_m2_ck: clock-dpll-eve-m2-8@294 { #clock-cells = <0>; compatible = "ti,divider-clock"; + clock-output-names = "dpll_eve_m2_ck"; clocks = <&dpll_eve_ck>; ti,max-div = <31>; ti,autoidle-shift = <8>; @@ -573,17 +647,19 @@ ti,invert-autoidle-bit; }; - eve_dclk_div: eve_dclk_div { + eve_dclk_div: clock-eve-dclk-div { #clock-cells = <0>; compatible = "fixed-factor-clock"; + clock-output-names = "eve_dclk_div"; clocks = <&dpll_eve_m2_ck>; clock-mult = <1>; clock-div = <1>; }; - dpll_core_h13x2_ck: dpll_core_h13x2_ck@140 { + dpll_core_h13x2_ck: clock-dpll-core-h13x2-8@140 { #clock-cells = <0>; compatible = "ti,divider-clock"; + clock-output-names = "dpll_core_h13x2_ck"; clocks = <&dpll_core_x2_ck>; ti,max-div = <63>; ti,autoidle-shift = <8>; @@ -592,9 +668,10 @@ ti,invert-autoidle-bit; }; - dpll_core_h14x2_ck: dpll_core_h14x2_ck@144 { + dpll_core_h14x2_ck: clock-dpll-core-h14x2-8@144 { #clock-cells = <0>; compatible = "ti,divider-clock"; + clock-output-names = "dpll_core_h14x2_ck"; clocks = <&dpll_core_x2_ck>; ti,max-div = <63>; ti,autoidle-shift = <8>; @@ -603,9 +680,10 @@ ti,invert-autoidle-bit; }; - dpll_core_h22x2_ck: dpll_core_h22x2_ck@154 { + dpll_core_h22x2_ck: clock-dpll-core-h22x2-8@154 { #clock-cells = <0>; compatible = "ti,divider-clock"; + clock-output-names = "dpll_core_h22x2_ck"; clocks = <&dpll_core_x2_ck>; ti,max-div = <63>; ti,autoidle-shift = <8>; @@ -614,9 +692,10 @@ ti,invert-autoidle-bit; }; - dpll_core_h23x2_ck: dpll_core_h23x2_ck@158 { + dpll_core_h23x2_ck: clock-dpll-core-h23x2-8@158 { #clock-cells = <0>; compatible = "ti,divider-clock"; + clock-output-names = "dpll_core_h23x2_ck"; clocks = <&dpll_core_x2_ck>; ti,max-div = <63>; ti,autoidle-shift = <8>; @@ -625,9 +704,10 @@ ti,invert-autoidle-bit; }; - dpll_core_h24x2_ck: dpll_core_h24x2_ck@15c { + dpll_core_h24x2_ck: clock-dpll-core-h24x2-8@15c { #clock-cells = <0>; compatible = "ti,divider-clock"; + clock-output-names = "dpll_core_h24x2_ck"; clocks = <&dpll_core_x2_ck>; ti,max-div = <63>; ti,autoidle-shift = <8>; @@ -636,15 +716,17 @@ ti,invert-autoidle-bit; }; - dpll_ddr_x2_ck: dpll_ddr_x2_ck { + dpll_ddr_x2_ck: clock-dpll-ddr-x2 { #clock-cells = <0>; compatible = "ti,omap4-dpll-x2-clock"; + clock-output-names = "dpll_ddr_x2_ck"; clocks = <&dpll_ddr_ck>; }; - dpll_ddr_h11x2_ck: dpll_ddr_h11x2_ck@228 { + dpll_ddr_h11x2_ck: clock-dpll-ddr-h11x2-8@228 { #clock-cells = <0>; compatible = "ti,divider-clock"; + clock-output-names = "dpll_ddr_h11x2_ck"; clocks = <&dpll_ddr_x2_ck>; ti,max-div = <63>; ti,autoidle-shift = <8>; @@ -653,15 +735,17 @@ ti,invert-autoidle-bit; }; - dpll_dsp_x2_ck: dpll_dsp_x2_ck { + dpll_dsp_x2_ck: clock-dpll-dsp-x2 { #clock-cells = <0>; compatible = "ti,omap4-dpll-x2-clock"; + clock-output-names = "dpll_dsp_x2_ck"; clocks = <&dpll_dsp_ck>; }; - dpll_dsp_m3x2_ck: dpll_dsp_m3x2_ck@248 { + dpll_dsp_m3x2_ck: clock-dpll-dsp-m3x2-8@248 { #clock-cells = <0>; compatible = "ti,divider-clock"; + clock-output-names = "dpll_dsp_m3x2_ck"; clocks = <&dpll_dsp_x2_ck>; ti,max-div = <31>; ti,autoidle-shift = <8>; @@ -672,15 +756,17 @@ assigned-clock-rates = <400000000>; }; - dpll_gmac_x2_ck: dpll_gmac_x2_ck { + dpll_gmac_x2_ck: clock-dpll-gmac-x2 { #clock-cells = <0>; compatible = "ti,omap4-dpll-x2-clock"; + clock-output-names = "dpll_gmac_x2_ck"; clocks = <&dpll_gmac_ck>; }; - dpll_gmac_h11x2_ck: dpll_gmac_h11x2_ck@2c0 { + dpll_gmac_h11x2_ck: clock-dpll-gmac-h11x2-8@2c0 { #clock-cells = <0>; compatible = "ti,divider-clock"; + clock-output-names = "dpll_gmac_h11x2_ck"; clocks = <&dpll_gmac_x2_ck>; ti,max-div = <63>; ti,autoidle-shift = <8>; @@ -689,9 +775,10 @@ ti,invert-autoidle-bit; }; - dpll_gmac_h12x2_ck: dpll_gmac_h12x2_ck@2c4 { + dpll_gmac_h12x2_ck: clock-dpll-gmac-h12x2-8@2c4 { #clock-cells = <0>; compatible = "ti,divider-clock"; + clock-output-names = "dpll_gmac_h12x2_ck"; clocks = <&dpll_gmac_x2_ck>; ti,max-div = <63>; ti,autoidle-shift = <8>; @@ -700,9 +787,10 @@ ti,invert-autoidle-bit; }; - dpll_gmac_h13x2_ck: dpll_gmac_h13x2_ck@2c8 { + dpll_gmac_h13x2_ck: clock-dpll-gmac-h13x2-8@2c8 { #clock-cells = <0>; compatible = "ti,divider-clock"; + clock-output-names = "dpll_gmac_h13x2_ck"; clocks = <&dpll_gmac_x2_ck>; ti,max-div = <63>; ti,autoidle-shift = <8>; @@ -711,9 +799,10 @@ ti,invert-autoidle-bit; }; - dpll_gmac_m3x2_ck: dpll_gmac_m3x2_ck@2bc { + dpll_gmac_m3x2_ck: clock-dpll-gmac-m3x2-8@2bc { #clock-cells = <0>; compatible = "ti,divider-clock"; + clock-output-names = "dpll_gmac_m3x2_ck"; clocks = <&dpll_gmac_x2_ck>; ti,max-div = <31>; ti,autoidle-shift = <8>; @@ -722,33 +811,37 @@ ti,invert-autoidle-bit; }; - gmii_m_clk_div: gmii_m_clk_div { + gmii_m_clk_div: clock-gmii-m-clk-div { #clock-cells = <0>; compatible = "fixed-factor-clock"; + clock-output-names = "gmii_m_clk_div"; clocks = <&dpll_gmac_h11x2_ck>; clock-mult = <1>; clock-div = <2>; }; - hdmi_clk2_div: hdmi_clk2_div { + hdmi_clk2_div: clock-hdmi-clk2-div { #clock-cells = <0>; compatible = "fixed-factor-clock"; + clock-output-names = "hdmi_clk2_div"; clocks = <&hdmi_clkin_ck>; clock-mult = <1>; clock-div = <1>; }; - hdmi_div_clk: hdmi_div_clk { + hdmi_div_clk: clock-hdmi-div { #clock-cells = <0>; compatible = "fixed-factor-clock"; + clock-output-names = "hdmi_div_clk"; clocks = <&hdmi_clkin_ck>; clock-mult = <1>; clock-div = <1>; }; - l3_iclk_div: l3_iclk_div@100 { + l3_iclk_div: clock-l3-iclk-div-4@100 { #clock-cells = <0>; compatible = "ti,divider-clock"; + clock-output-names = "l3_iclk_div"; ti,max-div = <2>; ti,bit-shift = <4>; reg = <0x0100>; @@ -756,374 +849,420 @@ ti,index-power-of-two; }; - l4_root_clk_div: l4_root_clk_div { + l4_root_clk_div: clock-l4-root-clk-div { #clock-cells = <0>; compatible = "fixed-factor-clock"; + clock-output-names = "l4_root_clk_div"; clocks = <&l3_iclk_div>; clock-mult = <1>; clock-div = <2>; }; - video1_clk2_div: video1_clk2_div { + video1_clk2_div: clock-video1-clk2-div { #clock-cells = <0>; compatible = "fixed-factor-clock"; + clock-output-names = "video1_clk2_div"; clocks = <&video1_clkin_ck>; clock-mult = <1>; clock-div = <1>; }; - video1_div_clk: video1_div_clk { + video1_div_clk: clock-video1-div { #clock-cells = <0>; compatible = "fixed-factor-clock"; + clock-output-names = "video1_div_clk"; clocks = <&video1_clkin_ck>; clock-mult = <1>; clock-div = <1>; }; - video2_clk2_div: video2_clk2_div { + video2_clk2_div: clock-video2-clk2-div { #clock-cells = <0>; compatible = "fixed-factor-clock"; + clock-output-names = "video2_clk2_div"; clocks = <&video2_clkin_ck>; clock-mult = <1>; clock-div = <1>; }; - video2_div_clk: video2_div_clk { + video2_div_clk: clock-video2-div { #clock-cells = <0>; compatible = "fixed-factor-clock"; + clock-output-names = "video2_div_clk"; clocks = <&video2_clkin_ck>; clock-mult = <1>; clock-div = <1>; }; - dummy_ck: dummy_ck { + dummy_ck: clock-dummy { #clock-cells = <0>; compatible = "fixed-clock"; + clock-output-names = "dummy_ck"; clock-frequency = <0>; }; }; &prm_clocks { - sys_clkin1: sys_clkin1@110 { + sys_clkin1: clock-sys-clkin1@110 { #clock-cells = <0>; compatible = "ti,mux-clock"; + clock-output-names = "sys_clkin1"; clocks = <&virt_12000000_ck>, <&virt_20000000_ck>, <&virt_16800000_ck>, <&virt_19200000_ck>, <&virt_26000000_ck>, <&virt_27000000_ck>, <&virt_38400000_ck>; reg = <0x0110>; ti,index-starts-at-one; }; - abe_dpll_sys_clk_mux: abe_dpll_sys_clk_mux@118 { + abe_dpll_sys_clk_mux: clock-abe-dpll-sys-clk-mux@118 { #clock-cells = <0>; compatible = "ti,mux-clock"; + clock-output-names = "abe_dpll_sys_clk_mux"; clocks = <&sys_clkin1>, <&sys_clkin2>; reg = <0x0118>; }; - abe_dpll_bypass_clk_mux: abe_dpll_bypass_clk_mux@114 { + abe_dpll_bypass_clk_mux: clock-abe-dpll-bypass-clk-mux@114 { #clock-cells = <0>; compatible = "ti,mux-clock"; + clock-output-names = "abe_dpll_bypass_clk_mux"; clocks = <&abe_dpll_sys_clk_mux>, <&sys_32k_ck>; reg = <0x0114>; }; - abe_dpll_clk_mux: abe_dpll_clk_mux@10c { + abe_dpll_clk_mux: clock-abe-dpll-clk-mux@10c { #clock-cells = <0>; compatible = "ti,mux-clock"; + clock-output-names = "abe_dpll_clk_mux"; clocks = <&abe_dpll_sys_clk_mux>, <&sys_32k_ck>; reg = <0x010c>; }; - abe_24m_fclk: abe_24m_fclk@11c { + abe_24m_fclk: clock-abe-24m@11c { #clock-cells = <0>; compatible = "ti,divider-clock"; + clock-output-names = "abe_24m_fclk"; clocks = <&dpll_abe_m2x2_ck>; reg = <0x011c>; ti,dividers = <8>, <16>; }; - aess_fclk: aess_fclk@178 { + aess_fclk: clock-aess@178 { #clock-cells = <0>; compatible = "ti,divider-clock"; + clock-output-names = "aess_fclk"; clocks = <&abe_clk>; reg = <0x0178>; ti,max-div = <2>; }; - abe_giclk_div: abe_giclk_div@174 { + abe_giclk_div: clock-abe-giclk-div@174 { #clock-cells = <0>; compatible = "ti,divider-clock"; + clock-output-names = "abe_giclk_div"; clocks = <&aess_fclk>; reg = <0x0174>; ti,max-div = <2>; }; - abe_lp_clk_div: abe_lp_clk_div@1d8 { + abe_lp_clk_div: clock-abe-lp-clk-div@1d8 { #clock-cells = <0>; compatible = "ti,divider-clock"; + clock-output-names = "abe_lp_clk_div"; clocks = <&dpll_abe_m2x2_ck>; reg = <0x01d8>; ti,dividers = <16>, <32>; }; - abe_sys_clk_div: abe_sys_clk_div@120 { + abe_sys_clk_div: clock-abe-sys-clk-div@120 { #clock-cells = <0>; compatible = "ti,divider-clock"; + clock-output-names = "abe_sys_clk_div"; clocks = <&sys_clkin1>; reg = <0x0120>; ti,max-div = <2>; }; - adc_gfclk_mux: adc_gfclk_mux@1dc { + adc_gfclk_mux: clock-adc-gfclk-mux@1dc { #clock-cells = <0>; compatible = "ti,mux-clock"; + clock-output-names = "adc_gfclk_mux"; clocks = <&sys_clkin1>, <&sys_clkin2>, <&sys_32k_ck>; reg = <0x01dc>; }; - sys_clk1_dclk_div: sys_clk1_dclk_div@1c8 { + sys_clk1_dclk_div: clock-sys-clk1-dclk-div@1c8 { #clock-cells = <0>; compatible = "ti,divider-clock"; + clock-output-names = "sys_clk1_dclk_div"; clocks = <&sys_clkin1>; ti,max-div = <64>; reg = <0x01c8>; ti,index-power-of-two; }; - sys_clk2_dclk_div: sys_clk2_dclk_div@1cc { + sys_clk2_dclk_div: clock-sys-clk2-dclk-div@1cc { #clock-cells = <0>; compatible = "ti,divider-clock"; + clock-output-names = "sys_clk2_dclk_div"; clocks = <&sys_clkin2>; ti,max-div = <64>; reg = <0x01cc>; ti,index-power-of-two; }; - per_abe_x1_dclk_div: per_abe_x1_dclk_div@1bc { + per_abe_x1_dclk_div: clock-per-abe-x1-dclk-div@1bc { #clock-cells = <0>; compatible = "ti,divider-clock"; + clock-output-names = "per_abe_x1_dclk_div"; clocks = <&dpll_abe_m2_ck>; ti,max-div = <64>; reg = <0x01bc>; ti,index-power-of-two; }; - dsp_gclk_div: dsp_gclk_div@18c { + dsp_gclk_div: clock-dsp-gclk-div@18c { #clock-cells = <0>; compatible = "ti,divider-clock"; + clock-output-names = "dsp_gclk_div"; clocks = <&dpll_dsp_m2_ck>; ti,max-div = <64>; reg = <0x018c>; ti,index-power-of-two; }; - gpu_dclk: gpu_dclk@1a0 { + gpu_dclk: clock-gpu-dclk@1a0 { #clock-cells = <0>; compatible = "ti,divider-clock"; + clock-output-names = "gpu_dclk"; clocks = <&dpll_gpu_m2_ck>; ti,max-div = <64>; reg = <0x01a0>; ti,index-power-of-two; }; - emif_phy_dclk_div: emif_phy_dclk_div@190 { + emif_phy_dclk_div: clock-emif-phy-dclk-div@190 { #clock-cells = <0>; compatible = "ti,divider-clock"; + clock-output-names = "emif_phy_dclk_div"; clocks = <&dpll_ddr_m2_ck>; ti,max-div = <64>; reg = <0x0190>; ti,index-power-of-two; }; - gmac_250m_dclk_div: gmac_250m_dclk_div@19c { + gmac_250m_dclk_div: clock-gmac-250m-dclk-div@19c { #clock-cells = <0>; compatible = "ti,divider-clock"; + clock-output-names = "gmac_250m_dclk_div"; clocks = <&dpll_gmac_m2_ck>; ti,max-div = <64>; reg = <0x019c>; ti,index-power-of-two; }; - gmac_main_clk: gmac_main_clk { + gmac_main_clk: clock-gmac-main { #clock-cells = <0>; compatible = "fixed-factor-clock"; + clock-output-names = "gmac_main_clk"; clocks = <&gmac_250m_dclk_div>; clock-mult = <1>; clock-div = <2>; }; - l3init_480m_dclk_div: l3init_480m_dclk_div@1ac { + l3init_480m_dclk_div: clock-l3init-480m-dclk-div@1ac { #clock-cells = <0>; compatible = "ti,divider-clock"; + clock-output-names = "l3init_480m_dclk_div"; clocks = <&dpll_usb_m2_ck>; ti,max-div = <64>; reg = <0x01ac>; ti,index-power-of-two; }; - usb_otg_dclk_div: usb_otg_dclk_div@184 { + usb_otg_dclk_div: clock-usb-otg-dclk-div@184 { #clock-cells = <0>; compatible = "ti,divider-clock"; + clock-output-names = "usb_otg_dclk_div"; clocks = <&usb_otg_clkin_ck>; ti,max-div = <64>; reg = <0x0184>; ti,index-power-of-two; }; - sata_dclk_div: sata_dclk_div@1c0 { + sata_dclk_div: clock-sata-dclk-div@1c0 { #clock-cells = <0>; compatible = "ti,divider-clock"; + clock-output-names = "sata_dclk_div"; clocks = <&sys_clkin1>; ti,max-div = <64>; reg = <0x01c0>; ti,index-power-of-two; }; - pcie2_dclk_div: pcie2_dclk_div@1b8 { + pcie2_dclk_div: clock-pcie2-dclk-div@1b8 { #clock-cells = <0>; compatible = "ti,divider-clock"; + clock-output-names = "pcie2_dclk_div"; clocks = <&dpll_pcie_ref_m2_ck>; ti,max-div = <64>; reg = <0x01b8>; ti,index-power-of-two; }; - pcie_dclk_div: pcie_dclk_div@1b4 { + pcie_dclk_div: clock-pcie-dclk-div@1b4 { #clock-cells = <0>; compatible = "ti,divider-clock"; + clock-output-names = "pcie_dclk_div"; clocks = <&apll_pcie_m2_ck>; ti,max-div = <64>; reg = <0x01b4>; ti,index-power-of-two; }; - emu_dclk_div: emu_dclk_div@194 { + emu_dclk_div: clock-emu-dclk-div@194 { #clock-cells = <0>; compatible = "ti,divider-clock"; + clock-output-names = "emu_dclk_div"; clocks = <&sys_clkin1>; ti,max-div = <64>; reg = <0x0194>; ti,index-power-of-two; }; - secure_32k_dclk_div: secure_32k_dclk_div@1c4 { + secure_32k_dclk_div: clock-secure-32k-dclk-div@1c4 { #clock-cells = <0>; compatible = "ti,divider-clock"; + clock-output-names = "secure_32k_dclk_div"; clocks = <&secure_32k_clk_src_ck>; ti,max-div = <64>; reg = <0x01c4>; ti,index-power-of-two; }; - clkoutmux0_clk_mux: clkoutmux0_clk_mux@158 { + clkoutmux0_clk_mux: clock-clkoutmux0-clk-mux@158 { #clock-cells = <0>; compatible = "ti,mux-clock"; + clock-output-names = "clkoutmux0_clk_mux"; clocks = <&sys_clk1_dclk_div>, <&sys_clk2_dclk_div>, <&per_abe_x1_dclk_div>, <&mpu_dclk_div>, <&dsp_gclk_div>, <&iva_dclk>, <&gpu_dclk>, <&core_dpll_out_dclk_div>, <&emif_phy_dclk_div>, <&gmac_250m_dclk_div>, <&video2_dclk_div>, <&video1_dclk_div>, <&hdmi_dclk_div>, <&func_96m_aon_dclk_div>, <&l3init_480m_dclk_div>, <&usb_otg_dclk_div>, <&sata_dclk_div>, <&pcie2_dclk_div>, <&pcie_dclk_div>, <&emu_dclk_div>, <&secure_32k_dclk_div>, <&eve_dclk_div>; reg = <0x0158>; }; - clkoutmux1_clk_mux: clkoutmux1_clk_mux@15c { + clkoutmux1_clk_mux: clock-clkoutmux1-clk-mux@15c { #clock-cells = <0>; compatible = "ti,mux-clock"; + clock-output-names = "clkoutmux1_clk_mux"; clocks = <&sys_clk1_dclk_div>, <&sys_clk2_dclk_div>, <&per_abe_x1_dclk_div>, <&mpu_dclk_div>, <&dsp_gclk_div>, <&iva_dclk>, <&gpu_dclk>, <&core_dpll_out_dclk_div>, <&emif_phy_dclk_div>, <&gmac_250m_dclk_div>, <&video2_dclk_div>, <&video1_dclk_div>, <&hdmi_dclk_div>, <&func_96m_aon_dclk_div>, <&l3init_480m_dclk_div>, <&usb_otg_dclk_div>, <&sata_dclk_div>, <&pcie2_dclk_div>, <&pcie_dclk_div>, <&emu_dclk_div>, <&secure_32k_dclk_div>, <&eve_dclk_div>; reg = <0x015c>; }; - clkoutmux2_clk_mux: clkoutmux2_clk_mux@160 { + clkoutmux2_clk_mux: clock-clkoutmux2-clk-mux@160 { #clock-cells = <0>; compatible = "ti,mux-clock"; + clock-output-names = "clkoutmux2_clk_mux"; clocks = <&sys_clk1_dclk_div>, <&sys_clk2_dclk_div>, <&per_abe_x1_dclk_div>, <&mpu_dclk_div>, <&dsp_gclk_div>, <&iva_dclk>, <&gpu_dclk>, <&core_dpll_out_dclk_div>, <&emif_phy_dclk_div>, <&gmac_250m_dclk_div>, <&video2_dclk_div>, <&video1_dclk_div>, <&hdmi_dclk_div>, <&func_96m_aon_dclk_div>, <&l3init_480m_dclk_div>, <&usb_otg_dclk_div>, <&sata_dclk_div>, <&pcie2_dclk_div>, <&pcie_dclk_div>, <&emu_dclk_div>, <&secure_32k_dclk_div>, <&eve_dclk_div>; reg = <0x0160>; }; - custefuse_sys_gfclk_div: custefuse_sys_gfclk_div { + custefuse_sys_gfclk_div: clock-custefuse-sys-gfclk-div { #clock-cells = <0>; compatible = "fixed-factor-clock"; + clock-output-names = "custefuse_sys_gfclk_div"; clocks = <&sys_clkin1>; clock-mult = <1>; clock-div = <2>; }; - eve_clk: eve_clk@180 { + eve_clk: clock-eve@180 { #clock-cells = <0>; compatible = "ti,mux-clock"; + clock-output-names = "eve_clk"; clocks = <&dpll_eve_m2_ck>, <&dpll_dsp_m3x2_ck>; reg = <0x0180>; }; - hdmi_dpll_clk_mux: hdmi_dpll_clk_mux@164 { + hdmi_dpll_clk_mux: clock-hdmi-dpll-clk-mux@164 { #clock-cells = <0>; compatible = "ti,mux-clock"; + clock-output-names = "hdmi_dpll_clk_mux"; clocks = <&sys_clkin1>, <&sys_clkin2>; reg = <0x0164>; }; - mlb_clk: mlb_clk@134 { + mlb_clk: clock-mlb@134 { #clock-cells = <0>; compatible = "ti,divider-clock"; + clock-output-names = "mlb_clk"; clocks = <&mlb_clkin_ck>; ti,max-div = <64>; reg = <0x0134>; ti,index-power-of-two; }; - mlbp_clk: mlbp_clk@130 { + mlbp_clk: clock-mlbp@130 { #clock-cells = <0>; compatible = "ti,divider-clock"; + clock-output-names = "mlbp_clk"; clocks = <&mlbp_clkin_ck>; ti,max-div = <64>; reg = <0x0130>; ti,index-power-of-two; }; - per_abe_x1_gfclk2_div: per_abe_x1_gfclk2_div@138 { + per_abe_x1_gfclk2_div: clock-per-abe-x1-gfclk2-div@138 { #clock-cells = <0>; compatible = "ti,divider-clock"; + clock-output-names = "per_abe_x1_gfclk2_div"; clocks = <&dpll_abe_m2_ck>; ti,max-div = <64>; reg = <0x0138>; ti,index-power-of-two; }; - timer_sys_clk_div: timer_sys_clk_div@144 { + timer_sys_clk_div: clock-timer-sys-clk-div@144 { #clock-cells = <0>; compatible = "ti,divider-clock"; + clock-output-names = "timer_sys_clk_div"; clocks = <&sys_clkin1>; reg = <0x0144>; ti,max-div = <2>; }; - video1_dpll_clk_mux: video1_dpll_clk_mux@168 { + video1_dpll_clk_mux: clock-video1-dpll-clk-mux@168 { #clock-cells = <0>; compatible = "ti,mux-clock"; + clock-output-names = "video1_dpll_clk_mux"; clocks = <&sys_clkin1>, <&sys_clkin2>; reg = <0x0168>; }; - video2_dpll_clk_mux: video2_dpll_clk_mux@16c { + video2_dpll_clk_mux: clock-video2-dpll-clk-mux@16c { #clock-cells = <0>; compatible = "ti,mux-clock"; + clock-output-names = "video2_dpll_clk_mux"; clocks = <&sys_clkin1>, <&sys_clkin2>; reg = <0x016c>; }; - wkupaon_iclk_mux: wkupaon_iclk_mux@108 { + wkupaon_iclk_mux: clock-wkupaon-iclk-mux@108 { #clock-cells = <0>; compatible = "ti,mux-clock"; + clock-output-names = "wkupaon_iclk_mux"; clocks = <&sys_clkin1>, <&abe_lp_clk_div>; reg = <0x0108>; }; }; &cm_core_clocks { - dpll_pcie_ref_ck: dpll_pcie_ref_ck@200 { + dpll_pcie_ref_ck: clock@200 { #clock-cells = <0>; compatible = "ti,omap4-dpll-clock"; + clock-output-names = "dpll_pcie_ref_ck"; clocks = <&sys_clkin1>, <&sys_clkin1>; reg = <0x0200>, <0x0204>, <0x020c>, <0x0208>; }; - dpll_pcie_ref_m2ldo_ck: dpll_pcie_ref_m2ldo_ck@210 { + dpll_pcie_ref_m2ldo_ck: clock-dpll-pcie-ref-m2ldo-8@210 { #clock-cells = <0>; compatible = "ti,divider-clock"; + clock-output-names = "dpll_pcie_ref_m2ldo_ck"; clocks = <&dpll_pcie_ref_ck>; ti,max-div = <31>; ti,autoidle-shift = <8>; @@ -1132,23 +1271,26 @@ ti,invert-autoidle-bit; }; - apll_pcie_in_clk_mux: apll_pcie_in_clk_mux@4ae06118 { + apll_pcie_in_clk_mux: clock-apll-pcie-in-clk-mux-7@4ae06118 { compatible = "ti,mux-clock"; + clock-output-names = "apll_pcie_in_clk_mux"; clocks = <&dpll_pcie_ref_m2ldo_ck>, <&pciesref_acs_clk_ck>; #clock-cells = <0>; reg = <0x021c 0x4>; ti,bit-shift = <7>; }; - apll_pcie_ck: apll_pcie_ck@21c { + apll_pcie_ck: clock@21c { #clock-cells = <0>; compatible = "ti,dra7-apll-clock"; + clock-output-names = "apll_pcie_ck"; clocks = <&apll_pcie_in_clk_mux>, <&dpll_pcie_ref_ck>; reg = <0x021c>, <0x0220>; }; - optfclk_pciephy_div: optfclk_pciephy_div@4a00821c { + optfclk_pciephy_div: clock-optfclk-pciephy-div-8@4a00821c { compatible = "ti,divider-clock"; + clock-output-names = "optfclk_pciephy_div"; clocks = <&apll_pcie_ck>; #clock-cells = <0>; reg = <0x021c>; @@ -1157,48 +1299,54 @@ ti,max-div = <2>; }; - apll_pcie_clkvcoldo: apll_pcie_clkvcoldo { + apll_pcie_clkvcoldo: clock-apll-pcie-clkvcoldo { #clock-cells = <0>; compatible = "fixed-factor-clock"; + clock-output-names = "apll_pcie_clkvcoldo"; clocks = <&apll_pcie_ck>; clock-mult = <1>; clock-div = <1>; }; - apll_pcie_clkvcoldo_div: apll_pcie_clkvcoldo_div { + apll_pcie_clkvcoldo_div: clock-apll-pcie-clkvcoldo-div { #clock-cells = <0>; compatible = "fixed-factor-clock"; + clock-output-names = "apll_pcie_clkvcoldo_div"; clocks = <&apll_pcie_ck>; clock-mult = <1>; clock-div = <1>; }; - apll_pcie_m2_ck: apll_pcie_m2_ck { + apll_pcie_m2_ck: clock-apll-pcie-m2 { #clock-cells = <0>; compatible = "fixed-factor-clock"; + clock-output-names = "apll_pcie_m2_ck"; clocks = <&apll_pcie_ck>; clock-mult = <1>; clock-div = <1>; }; - dpll_per_byp_mux: dpll_per_byp_mux@14c { + dpll_per_byp_mux: clock-dpll-per-byp-mux-23@14c { #clock-cells = <0>; compatible = "ti,mux-clock"; + clock-output-names = "dpll_per_byp_mux"; clocks = <&sys_clkin1>, <&per_dpll_hs_clk_div>; ti,bit-shift = <23>; reg = <0x014c>; }; - dpll_per_ck: dpll_per_ck@140 { + dpll_per_ck: clock@140 { #clock-cells = <0>; compatible = "ti,omap4-dpll-clock"; + clock-output-names = "dpll_per_ck"; clocks = <&sys_clkin1>, <&dpll_per_byp_mux>; reg = <0x0140>, <0x0144>, <0x014c>, <0x0148>; }; - dpll_per_m2_ck: dpll_per_m2_ck@150 { + dpll_per_m2_ck: clock-dpll-per-m2-8@150 { #clock-cells = <0>; compatible = "ti,divider-clock"; + clock-output-names = "dpll_per_m2_ck"; clocks = <&dpll_per_ck>; ti,max-div = <31>; ti,autoidle-shift = <8>; @@ -1207,32 +1355,36 @@ ti,invert-autoidle-bit; }; - func_96m_aon_dclk_div: func_96m_aon_dclk_div { + func_96m_aon_dclk_div: clock-func-96m-aon-dclk-div { #clock-cells = <0>; compatible = "fixed-factor-clock"; + clock-output-names = "func_96m_aon_dclk_div"; clocks = <&dpll_per_m2_ck>; clock-mult = <1>; clock-div = <1>; }; - dpll_usb_byp_mux: dpll_usb_byp_mux@18c { + dpll_usb_byp_mux: clock-dpll-usb-byp-mux-23@18c { #clock-cells = <0>; compatible = "ti,mux-clock"; + clock-output-names = "dpll_usb_byp_mux"; clocks = <&sys_clkin1>, <&usb_dpll_hs_clk_div>; ti,bit-shift = <23>; reg = <0x018c>; }; - dpll_usb_ck: dpll_usb_ck@180 { + dpll_usb_ck: clock@180 { #clock-cells = <0>; compatible = "ti,omap4-dpll-j-type-clock"; + clock-output-names = "dpll_usb_ck"; clocks = <&sys_clkin1>, <&dpll_usb_byp_mux>; reg = <0x0180>, <0x0184>, <0x018c>, <0x0188>; }; - dpll_usb_m2_ck: dpll_usb_m2_ck@190 { + dpll_usb_m2_ck: clock-dpll-usb-m2-8@190 { #clock-cells = <0>; compatible = "ti,divider-clock"; + clock-output-names = "dpll_usb_m2_ck"; clocks = <&dpll_usb_ck>; ti,max-div = <127>; ti,autoidle-shift = <8>; @@ -1241,9 +1393,10 @@ ti,invert-autoidle-bit; }; - dpll_pcie_ref_m2_ck: dpll_pcie_ref_m2_ck@210 { + dpll_pcie_ref_m2_ck: clock-dpll-pcie-ref-m2-8@210 { #clock-cells = <0>; compatible = "ti,divider-clock"; + clock-output-names = "dpll_pcie_ref_m2_ck"; clocks = <&dpll_pcie_ref_ck>; ti,max-div = <127>; ti,autoidle-shift = <8>; @@ -1252,15 +1405,17 @@ ti,invert-autoidle-bit; }; - dpll_per_x2_ck: dpll_per_x2_ck { + dpll_per_x2_ck: clock-dpll-per-x2 { #clock-cells = <0>; compatible = "ti,omap4-dpll-x2-clock"; + clock-output-names = "dpll_per_x2_ck"; clocks = <&dpll_per_ck>; }; - dpll_per_h11x2_ck: dpll_per_h11x2_ck@158 { + dpll_per_h11x2_ck: clock-dpll-per-h11x2-8@158 { #clock-cells = <0>; compatible = "ti,divider-clock"; + clock-output-names = "dpll_per_h11x2_ck"; clocks = <&dpll_per_x2_ck>; ti,max-div = <63>; ti,autoidle-shift = <8>; @@ -1269,9 +1424,10 @@ ti,invert-autoidle-bit; }; - dpll_per_h12x2_ck: dpll_per_h12x2_ck@15c { + dpll_per_h12x2_ck: clock-dpll-per-h12x2-8@15c { #clock-cells = <0>; compatible = "ti,divider-clock"; + clock-output-names = "dpll_per_h12x2_ck"; clocks = <&dpll_per_x2_ck>; ti,max-div = <63>; ti,autoidle-shift = <8>; @@ -1280,9 +1436,10 @@ ti,invert-autoidle-bit; }; - dpll_per_h13x2_ck: dpll_per_h13x2_ck@160 { + dpll_per_h13x2_ck: clock-dpll-per-h13x2-8@160 { #clock-cells = <0>; compatible = "ti,divider-clock"; + clock-output-names = "dpll_per_h13x2_ck"; clocks = <&dpll_per_x2_ck>; ti,max-div = <63>; ti,autoidle-shift = <8>; @@ -1291,9 +1448,10 @@ ti,invert-autoidle-bit; }; - dpll_per_h14x2_ck: dpll_per_h14x2_ck@164 { + dpll_per_h14x2_ck: clock-dpll-per-h14x2-8@164 { #clock-cells = <0>; compatible = "ti,divider-clock"; + clock-output-names = "dpll_per_h14x2_ck"; clocks = <&dpll_per_x2_ck>; ti,max-div = <63>; ti,autoidle-shift = <8>; @@ -1302,9 +1460,10 @@ ti,invert-autoidle-bit; }; - dpll_per_m2x2_ck: dpll_per_m2x2_ck@150 { + dpll_per_m2x2_ck: clock-dpll-per-m2x2-8@150 { #clock-cells = <0>; compatible = "ti,divider-clock"; + clock-output-names = "dpll_per_m2x2_ck"; clocks = <&dpll_per_x2_ck>; ti,max-div = <31>; ti,autoidle-shift = <8>; @@ -1313,105 +1472,118 @@ ti,invert-autoidle-bit; }; - dpll_usb_clkdcoldo: dpll_usb_clkdcoldo { + dpll_usb_clkdcoldo: clock-dpll-usb-clkdcoldo { #clock-cells = <0>; compatible = "fixed-factor-clock"; + clock-output-names = "dpll_usb_clkdcoldo"; clocks = <&dpll_usb_ck>; clock-mult = <1>; clock-div = <1>; }; - func_128m_clk: func_128m_clk { + func_128m_clk: clock-func-128m { #clock-cells = <0>; compatible = "fixed-factor-clock"; + clock-output-names = "func_128m_clk"; clocks = <&dpll_per_h11x2_ck>; clock-mult = <1>; clock-div = <2>; }; - func_12m_fclk: func_12m_fclk { + func_12m_fclk: clock-func-12m-fclk { #clock-cells = <0>; compatible = "fixed-factor-clock"; + clock-output-names = "func_12m_fclk"; clocks = <&dpll_per_m2x2_ck>; clock-mult = <1>; clock-div = <16>; }; - func_24m_clk: func_24m_clk { + func_24m_clk: clock-func-24m { #clock-cells = <0>; compatible = "fixed-factor-clock"; + clock-output-names = "func_24m_clk"; clocks = <&dpll_per_m2_ck>; clock-mult = <1>; clock-div = <4>; }; - func_48m_fclk: func_48m_fclk { + func_48m_fclk: clock-func-48m-fclk { #clock-cells = <0>; compatible = "fixed-factor-clock"; + clock-output-names = "func_48m_fclk"; clocks = <&dpll_per_m2x2_ck>; clock-mult = <1>; clock-div = <4>; }; - func_96m_fclk: func_96m_fclk { + func_96m_fclk: clock-func-96m-fclk { #clock-cells = <0>; compatible = "fixed-factor-clock"; + clock-output-names = "func_96m_fclk"; clocks = <&dpll_per_m2x2_ck>; clock-mult = <1>; clock-div = <2>; }; - l3init_60m_fclk: l3init_60m_fclk@104 { + l3init_60m_fclk: clock-l3init-60m@104 { #clock-cells = <0>; compatible = "ti,divider-clock"; + clock-output-names = "l3init_60m_fclk"; clocks = <&dpll_usb_m2_ck>; reg = <0x0104>; ti,dividers = <1>, <8>; }; - clkout2_clk: clkout2_clk@6b0 { + clkout2_clk: clock-clkout2-8@6b0 { #clock-cells = <0>; compatible = "ti,gate-clock"; + clock-output-names = "clkout2_clk"; clocks = <&clkoutmux2_clk_mux>; ti,bit-shift = <8>; reg = <0x06b0>; }; - l3init_960m_gfclk: l3init_960m_gfclk@6c0 { + l3init_960m_gfclk: clock-l3init-960m-gfclk-8@6c0 { #clock-cells = <0>; compatible = "ti,gate-clock"; + clock-output-names = "l3init_960m_gfclk"; clocks = <&dpll_usb_clkdcoldo>; ti,bit-shift = <8>; reg = <0x06c0>; }; - usb_phy1_always_on_clk32k: usb_phy1_always_on_clk32k@640 { + usb_phy1_always_on_clk32k: clock-usb-phy1-always-on-clk32k-8@640 { #clock-cells = <0>; compatible = "ti,gate-clock"; + clock-output-names = "usb_phy1_always_on_clk32k"; clocks = <&sys_32k_ck>; ti,bit-shift = <8>; reg = <0x0640>; }; - usb_phy2_always_on_clk32k: usb_phy2_always_on_clk32k@688 { + usb_phy2_always_on_clk32k: clock-usb-phy2-always-on-clk32k-8@688 { #clock-cells = <0>; compatible = "ti,gate-clock"; + clock-output-names = "usb_phy2_always_on_clk32k"; clocks = <&sys_32k_ck>; ti,bit-shift = <8>; reg = <0x0688>; }; - usb_phy3_always_on_clk32k: usb_phy3_always_on_clk32k@698 { + usb_phy3_always_on_clk32k: clock-usb-phy3-always-on-clk32k-8@698 { #clock-cells = <0>; compatible = "ti,gate-clock"; + clock-output-names = "usb_phy3_always_on_clk32k"; clocks = <&sys_32k_ck>; ti,bit-shift = <8>; reg = <0x0698>; }; - gpu_core_gclk_mux: gpu_core_gclk_mux@1220 { + gpu_core_gclk_mux: clock-gpu-core-gclk-mux-24@1220 { #clock-cells = <0>; compatible = "ti,mux-clock"; + clock-output-names = "gpu_core_gclk_mux"; clocks = <&dpll_core_h14x2_ck>, <&dpll_per_h14x2_ck>, <&dpll_gpu_m2_ck>; ti,bit-shift = <24>; reg = <0x1220>; @@ -1419,9 +1591,10 @@ assigned-clock-parents = <&dpll_gpu_m2_ck>; }; - gpu_hyd_gclk_mux: gpu_hyd_gclk_mux@1220 { + gpu_hyd_gclk_mux: clock-gpu-hyd-gclk-mux-26@1220 { #clock-cells = <0>; compatible = "ti,mux-clock"; + clock-output-names = "gpu_hyd_gclk_mux"; clocks = <&dpll_core_h14x2_ck>, <&dpll_per_h14x2_ck>, <&dpll_gpu_m2_ck>; ti,bit-shift = <26>; reg = <0x1220>; @@ -1429,34 +1602,38 @@ assigned-clock-parents = <&dpll_gpu_m2_ck>; }; - l3instr_ts_gclk_div: l3instr_ts_gclk_div@e50 { + l3instr_ts_gclk_div: clock-l3instr-ts-gclk-div-24@e50 { #clock-cells = <0>; compatible = "ti,divider-clock"; + clock-output-names = "l3instr_ts_gclk_div"; clocks = <&wkupaon_iclk_mux>; ti,bit-shift = <24>; reg = <0x0e50>; ti,dividers = <8>, <16>, <32>; }; - vip1_gclk_mux: vip1_gclk_mux@1020 { + vip1_gclk_mux: clock-vip1-gclk-mux-24@1020 { #clock-cells = <0>; compatible = "ti,mux-clock"; + clock-output-names = "vip1_gclk_mux"; clocks = <&l3_iclk_div>, <&dpll_core_h23x2_ck>; ti,bit-shift = <24>; reg = <0x1020>; }; - vip2_gclk_mux: vip2_gclk_mux@1028 { + vip2_gclk_mux: clock-vip2-gclk-mux-24@1028 { #clock-cells = <0>; compatible = "ti,mux-clock"; + clock-output-names = "vip2_gclk_mux"; clocks = <&l3_iclk_div>, <&dpll_core_h23x2_ck>; ti,bit-shift = <24>; reg = <0x1028>; }; - vip3_gclk_mux: vip3_gclk_mux@1030 { + vip3_gclk_mux: clock-vip3-gclk-mux-24@1030 { #clock-cells = <0>; compatible = "ti,mux-clock"; + clock-output-names = "vip3_gclk_mux"; clocks = <&l3_iclk_div>, <&dpll_core_h23x2_ck>; ti,bit-shift = <24>; reg = <0x1030>; @@ -1464,48 +1641,54 @@ }; &cm_core_clockdomains { - coreaon_clkdm: coreaon_clkdm { + coreaon_clkdm: clock-coreaon-clkdm { compatible = "ti,clockdomain"; + clock-output-names = "coreaon_clkdm"; clocks = <&dpll_usb_ck>; }; }; &scm_conf_clocks { - dss_deshdcp_clk: dss_deshdcp_clk@558 { + dss_deshdcp_clk: clock-dss-deshdcp-0@558 { #clock-cells = <0>; compatible = "ti,gate-clock"; + clock-output-names = "dss_deshdcp_clk"; clocks = <&l3_iclk_div>; ti,bit-shift = <0>; reg = <0x558>; }; - ehrpwm0_tbclk: ehrpwm0_tbclk@558 { + ehrpwm0_tbclk: clock-ehrpwm0-tbclk-20@558 { #clock-cells = <0>; compatible = "ti,gate-clock"; + clock-output-names = "ehrpwm0_tbclk"; clocks = <&l4_root_clk_div>; ti,bit-shift = <20>; reg = <0x0558>; }; - ehrpwm1_tbclk: ehrpwm1_tbclk@558 { + ehrpwm1_tbclk: clock-ehrpwm1-tbclk-21@558 { #clock-cells = <0>; compatible = "ti,gate-clock"; + clock-output-names = "ehrpwm1_tbclk"; clocks = <&l4_root_clk_div>; ti,bit-shift = <21>; reg = <0x0558>; }; - ehrpwm2_tbclk: ehrpwm2_tbclk@558 { + ehrpwm2_tbclk: clock-ehrpwm2-tbclk-22@558 { #clock-cells = <0>; compatible = "ti,gate-clock"; + clock-output-names = "ehrpwm2_tbclk"; clocks = <&l4_root_clk_div>; ti,bit-shift = <22>; reg = <0x0558>; }; - sys_32k_ck: sys_32k_ck { + sys_32k_ck: clock-sys-32k { #clock-cells = <0>; compatible = "ti,mux-clock"; + clock-output-names = "sys_32k_ck"; clocks = <&sys_clk32_crystal_ck>, <&sys_clk32_pseudo_ck>, <&sys_clk32_pseudo_ck>, <&sys_clk32_pseudo_ck>; ti,bit-shift = <8>; reg = <0x6c4>; @@ -1513,97 +1696,110 @@ }; &cm_core_aon { - mpu_cm: mpu-cm@300 { + mpu_cm: clock@300 { compatible = "ti,omap4-cm"; + clock-output-names = "mpu_cm"; reg = <0x300 0x100>; #address-cells = <1>; #size-cells = <1>; ranges = <0 0x300 0x100>; - mpu_clkctrl: mpu-clkctrl@20 { + mpu_clkctrl: clock@20 { compatible = "ti,clkctrl"; + clock-output-names = "mpu_clkctrl"; reg = <0x20 0x4>; #clock-cells = <2>; }; }; - dsp1_cm: dsp1-cm@400 { + dsp1_cm: clock@400 { compatible = "ti,omap4-cm"; + clock-output-names = "dsp1_cm"; reg = <0x400 0x100>; #address-cells = <1>; #size-cells = <1>; ranges = <0 0x400 0x100>; - dsp1_clkctrl: dsp1-clkctrl@20 { + dsp1_clkctrl: clock@20 { compatible = "ti,clkctrl"; + clock-output-names = "dsp1_clkctrl"; reg = <0x20 0x4>; #clock-cells = <2>; }; }; - ipu_cm: ipu-cm@500 { + ipu_cm: clock@500 { compatible = "ti,omap4-cm"; + clock-output-names = "ipu_cm"; reg = <0x500 0x100>; #address-cells = <1>; #size-cells = <1>; ranges = <0 0x500 0x100>; - ipu1_clkctrl: ipu1-clkctrl@20 { + ipu1_clkctrl: clock@20 { compatible = "ti,clkctrl"; + clock-output-names = "ipu1_clkctrl"; reg = <0x20 0x4>; #clock-cells = <2>; assigned-clocks = <&ipu1_clkctrl DRA7_IPU1_MMU_IPU1_CLKCTRL 24>; assigned-clock-parents = <&dpll_core_h22x2_ck>; }; - ipu_clkctrl: ipu-clkctrl@50 { + ipu_clkctrl: clock@50 { compatible = "ti,clkctrl"; + clock-output-names = "ipu_clkctrl"; reg = <0x50 0x34>; #clock-cells = <2>; }; }; - dsp2_cm: dsp2-cm@600 { + dsp2_cm: clock@600 { compatible = "ti,omap4-cm"; + clock-output-names = "dsp2_cm"; reg = <0x600 0x100>; #address-cells = <1>; #size-cells = <1>; ranges = <0 0x600 0x100>; - dsp2_clkctrl: dsp2-clkctrl@20 { + dsp2_clkctrl: clock@20 { compatible = "ti,clkctrl"; + clock-output-names = "dsp2_clkctrl"; reg = <0x20 0x4>; #clock-cells = <2>; }; }; - rtc_cm: rtc-cm@700 { + rtc_cm: clock@700 { compatible = "ti,omap4-cm"; + clock-output-names = "rtc_cm"; reg = <0x700 0x60>; #address-cells = <1>; #size-cells = <1>; ranges = <0 0x700 0x60>; - rtc_clkctrl: rtc-clkctrl@20 { + rtc_clkctrl: clock@20 { compatible = "ti,clkctrl"; + clock-output-names = "rtc_clkctrl"; reg = <0x20 0x28>; #clock-cells = <2>; }; }; - vpe_cm: vpe-cm@760 { + vpe_cm: clock@760 { compatible = "ti,omap4-cm"; + clock-output-names = "vpe_cm"; reg = <0x760 0xc>; #address-cells = <1>; #size-cells = <1>; ranges = <0 0x760 0xc>; - vpe_clkctrl: vpe-clkctrl@0 { + vpe_clkctrl: clock@0 { compatible = "ti,clkctrl"; + clock-output-names = "vpe_clkctrl"; reg = <0x0 0xc>; #clock-cells = <2>; }; @@ -1612,212 +1808,242 @@ }; &cm_core { - coreaon_cm: coreaon-cm@600 { + coreaon_cm: clock@600 { compatible = "ti,omap4-cm"; + clock-output-names = "coreaon_cm"; reg = <0x600 0x100>; #address-cells = <1>; #size-cells = <1>; ranges = <0 0x600 0x100>; - coreaon_clkctrl: coreaon-clkctrl@20 { + coreaon_clkctrl: clock@20 { compatible = "ti,clkctrl"; + clock-output-names = "coreaon_clkctrl"; reg = <0x20 0x1c>; #clock-cells = <2>; }; }; - l3main1_cm: l3main1-cm@700 { + l3main1_cm: clock@700 { compatible = "ti,omap4-cm"; + clock-output-names = "l3main1_cm"; reg = <0x700 0x100>; #address-cells = <1>; #size-cells = <1>; ranges = <0 0x700 0x100>; - l3main1_clkctrl: l3main1-clkctrl@20 { + l3main1_clkctrl: clock@20 { compatible = "ti,clkctrl"; + clock-output-names = "l3main1_clkctrl"; reg = <0x20 0x74>; #clock-cells = <2>; }; }; - ipu2_cm: ipu2-cm@900 { + ipu2_cm: clock@900 { compatible = "ti,omap4-cm"; + clock-output-names = "ipu2_cm"; reg = <0x900 0x100>; #address-cells = <1>; #size-cells = <1>; ranges = <0 0x900 0x100>; - ipu2_clkctrl: ipu2-clkctrl@20 { + ipu2_clkctrl: clock@20 { compatible = "ti,clkctrl"; + clock-output-names = "ipu2_clkctrl"; reg = <0x20 0x4>; #clock-cells = <2>; }; }; - dma_cm: dma-cm@a00 { + dma_cm: clock@a00 { compatible = "ti,omap4-cm"; + clock-output-names = "dma_cm"; reg = <0xa00 0x100>; #address-cells = <1>; #size-cells = <1>; ranges = <0 0xa00 0x100>; - dma_clkctrl: dma-clkctrl@20 { + dma_clkctrl: clock@20 { compatible = "ti,clkctrl"; + clock-output-names = "dma_clkctrl"; reg = <0x20 0x4>; #clock-cells = <2>; }; }; - emif_cm: emif-cm@b00 { + emif_cm: clock@b00 { compatible = "ti,omap4-cm"; + clock-output-names = "emif_cm"; reg = <0xb00 0x100>; #address-cells = <1>; #size-cells = <1>; ranges = <0 0xb00 0x100>; - emif_clkctrl: emif-clkctrl@20 { + emif_clkctrl: clock@20 { compatible = "ti,clkctrl"; + clock-output-names = "emif_clkctrl"; reg = <0x20 0x4>; #clock-cells = <2>; }; }; - atl_cm: atl-cm@c00 { + atl_cm: clock@c00 { compatible = "ti,omap4-cm"; + clock-output-names = "atl_cm"; reg = <0xc00 0x100>; #address-cells = <1>; #size-cells = <1>; ranges = <0 0xc00 0x100>; - atl_clkctrl: atl-clkctrl@0 { + atl_clkctrl: clock@0 { compatible = "ti,clkctrl"; + clock-output-names = "atl_clkctrl"; reg = <0x0 0x4>; #clock-cells = <2>; }; }; - l4cfg_cm: l4cfg-cm@d00 { + l4cfg_cm: clock@d00 { compatible = "ti,omap4-cm"; + clock-output-names = "l4cfg_cm"; reg = <0xd00 0x100>; #address-cells = <1>; #size-cells = <1>; ranges = <0 0xd00 0x100>; - l4cfg_clkctrl: l4cfg-clkctrl@20 { + l4cfg_clkctrl: clock@20 { compatible = "ti,clkctrl"; + clock-output-names = "l4cfg_clkctrl"; reg = <0x20 0x84>; #clock-cells = <2>; }; }; - l3instr_cm: l3instr-cm@e00 { + l3instr_cm: clock@e00 { compatible = "ti,omap4-cm"; + clock-output-names = "l3instr_cm"; reg = <0xe00 0x100>; #address-cells = <1>; #size-cells = <1>; ranges = <0 0xe00 0x100>; - l3instr_clkctrl: l3instr-clkctrl@20 { + l3instr_clkctrl: clock@20 { compatible = "ti,clkctrl"; + clock-output-names = "l3instr_clkctrl"; reg = <0x20 0xc>; #clock-cells = <2>; }; }; - iva_cm: iva-cm@f00 { + iva_cm: clock@f00 { compatible = "ti,omap4-cm"; + clock-output-names = "iva_cm"; reg = <0xf00 0x100>; #address-cells = <1>; #size-cells = <1>; ranges = <0 0xf00 0x100>; - iva_clkctrl: iva-clkctrl@20 { + iva_clkctrl: clock@20 { compatible = "ti,clkctrl"; + clock-output-names = "iva_clkctrl"; reg = <0x20 0xc>; #clock-cells = <2>; }; }; - cam_cm: cam-cm@1000 { + cam_cm: clock@1000 { compatible = "ti,omap4-cm"; + clock-output-names = "cam_cm"; reg = <0x1000 0x100>; #address-cells = <1>; #size-cells = <1>; ranges = <0 0x1000 0x100>; - cam_clkctrl: cam-clkctrl@20 { + cam_clkctrl: clock@20 { compatible = "ti,clkctrl"; + clock-output-names = "cam_clkctrl"; reg = <0x20 0x2c>; #clock-cells = <2>; }; }; - dss_cm: dss-cm@1100 { + dss_cm: clock@1100 { compatible = "ti,omap4-cm"; + clock-output-names = "dss_cm"; reg = <0x1100 0x100>; #address-cells = <1>; #size-cells = <1>; ranges = <0 0x1100 0x100>; - dss_clkctrl: dss-clkctrl@20 { + dss_clkctrl: clock@20 { compatible = "ti,clkctrl"; + clock-output-names = "dss_clkctrl"; reg = <0x20 0x14>; #clock-cells = <2>; }; }; - gpu_cm: gpu-cm@1200 { + gpu_cm: clock@1200 { compatible = "ti,omap4-cm"; + clock-output-names = "gpu_cm"; reg = <0x1200 0x100>; #address-cells = <1>; #size-cells = <1>; ranges = <0 0x1200 0x100>; - gpu_clkctrl: gpu-clkctrl@20 { + gpu_clkctrl: clock@20 { compatible = "ti,clkctrl"; + clock-output-names = "gpu_clkctrl"; reg = <0x20 0x4>; #clock-cells = <2>; }; }; - l3init_cm: l3init-cm@1300 { + l3init_cm: clock@1300 { compatible = "ti,omap4-cm"; + clock-output-names = "l3init_cm"; reg = <0x1300 0x100>; #address-cells = <1>; #size-cells = <1>; ranges = <0 0x1300 0x100>; - l3init_clkctrl: l3init-clkctrl@20 { + l3init_clkctrl: clock@20 { compatible = "ti,clkctrl"; + clock-output-names = "l3init_clkctrl"; reg = <0x20 0x6c>, <0xe0 0x14>; #clock-cells = <2>; }; - pcie_clkctrl: pcie-clkctrl@b0 { + pcie_clkctrl: clock@b0 { compatible = "ti,clkctrl"; + clock-output-names = "pcie_clkctrl"; reg = <0xb0 0xc>; #clock-cells = <2>; }; - gmac_clkctrl: gmac-clkctrl@d0 { + gmac_clkctrl: clock@d0 { compatible = "ti,clkctrl"; + clock-output-names = "gmac_clkctrl"; reg = <0xd0 0x4>; #clock-cells = <2>; }; }; - l4per_cm: l4per-cm@1700 { + l4per_cm: clock@1700 { compatible = "ti,omap4-cm"; + clock-output-names = "l4per_cm"; reg = <0x1700 0x300>; #address-cells = <1>; #size-cells = <1>; ranges = <0 0x1700 0x300>; - l4per_clkctrl: l4per-clkctrl@28 { + l4per_clkctrl: clock@28 { compatible = "ti,clkctrl"; + clock-output-names = "l4per_clkctrl"; reg = <0x28 0x64>, <0xa0 0x24>, <0xf0 0x3c>, <0x140 0x1c>, <0x170 0x4>; #clock-cells = <2>; @@ -1825,20 +2051,23 @@ assigned-clock-parents = <&abe_24m_fclk>; }; - l4sec_clkctrl: l4sec-clkctrl@1a0 { + l4sec_clkctrl: clock@1a0 { compatible = "ti,clkctrl"; + clock-output-names = "l4sec_clkctrl"; reg = <0x1a0 0x2c>; #clock-cells = <2>; }; - l4per2_clkctrl: l4per2-clkctrl@c { + l4per2_clkctrl: clock@c { compatible = "ti,clkctrl"; + clock-output-names = "l4per2_clkctrl"; reg = <0xc 0x4>, <0x18 0xc>, <0x90 0xc>, <0xc4 0x4>, <0x138 0x4>, <0x160 0xc>, <0x178 0x24>, <0x1d0 0x3c>; #clock-cells = <2>; }; - l4per3_clkctrl: l4per3-clkctrl@14 { + l4per3_clkctrl: clock@14 { compatible = "ti,clkctrl"; + clock-output-names = "l4per3_clkctrl"; reg = <0x14 0x4>, <0xc8 0x14>, <0x130 0x4>; #clock-cells = <2>; }; @@ -1847,15 +2076,17 @@ }; &prm { - wkupaon_cm: wkupaon-cm@1800 { + wkupaon_cm: clock@1800 { compatible = "ti,omap4-cm"; + clock-output-names = "wkupaon_cm"; reg = <0x1800 0x100>; #address-cells = <1>; #size-cells = <1>; ranges = <0 0x1800 0x100>; - wkupaon_clkctrl: wkupaon-clkctrl@20 { + wkupaon_clkctrl: clock@20 { compatible = "ti,clkctrl"; + clock-output-names = "wkupaon_clkctrl"; reg = <0x20 0x6c>; #clock-cells = <2>; }; diff --git a/arch/arm/boot/dts/exynos3250.dtsi b/arch/arm/boot/dts/exynos3250.dtsi index ae644315855d..78dad233ff34 100644 --- a/arch/arm/boot/dts/exynos3250.dtsi +++ b/arch/arm/boot/dts/exynos3250.dtsi @@ -269,7 +269,8 @@ }; timer@10050000 { - compatible = "samsung,exynos4210-mct"; + compatible = "samsung,exynos3250-mct", + "samsung,exynos4210-mct"; reg = <0x10050000 0x800>; interrupts = <GIC_SPI 218 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 219 IRQ_TYPE_LEVEL_HIGH>, @@ -428,8 +429,6 @@ clocks = <&cmu CLK_PDMA0>; clock-names = "apb_pclk"; #dma-cells = <1>; - #dma-channels = <8>; - #dma-requests = <32>; }; pdma1: dma-controller@12690000 { @@ -439,8 +438,6 @@ clocks = <&cmu CLK_PDMA1>; clock-names = "apb_pclk"; #dma-cells = <1>; - #dma-channels = <8>; - #dma-requests = <32>; }; adc: adc@126c0000 { diff --git a/arch/arm/boot/dts/exynos4.dtsi b/arch/arm/boot/dts/exynos4.dtsi index e81b3ee4e0f7..6f0ca3354e39 100644 --- a/arch/arm/boot/dts/exynos4.dtsi +++ b/arch/arm/boot/dts/exynos4.dtsi @@ -373,7 +373,7 @@ status = "disabled"; }; - ehci: ehci@12580000 { + ehci: usb@12580000 { compatible = "samsung,exynos4210-ehci"; reg = <0x12580000 0x100>; interrupts = <GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>; @@ -384,7 +384,7 @@ phy-names = "host", "hsic0", "hsic1"; }; - ohci: ohci@12590000 { + ohci: usb@12590000 { compatible = "samsung,exynos4210-ohci"; reg = <0x12590000 0x100>; interrupts = <GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>; @@ -676,8 +676,6 @@ clocks = <&clock CLK_PDMA0>; clock-names = "apb_pclk"; #dma-cells = <1>; - #dma-channels = <8>; - #dma-requests = <32>; }; pdma1: dma-controller@12690000 { @@ -687,8 +685,6 @@ clocks = <&clock CLK_PDMA1>; clock-names = "apb_pclk"; #dma-cells = <1>; - #dma-channels = <8>; - #dma-requests = <32>; }; mdma1: dma-controller@12850000 { @@ -698,8 +694,6 @@ clocks = <&clock CLK_MDMA>; clock-names = "apb_pclk"; #dma-cells = <1>; - #dma-channels = <8>; - #dma-requests = <1>; }; fimd: fimd@11c00000 { diff --git a/arch/arm/boot/dts/exynos4210-universal_c210.dts b/arch/arm/boot/dts/exynos4210-universal_c210.dts index 138d606d58a5..62bf335d5bed 100644 --- a/arch/arm/boot/dts/exynos4210-universal_c210.dts +++ b/arch/arm/boot/dts/exynos4210-universal_c210.dts @@ -666,8 +666,6 @@ clocks = <&clock CLK_MDMA>; clock-names = "apb_pclk"; #dma-cells = <1>; - #dma-channels = <8>; - #dma-requests = <1>; power-domains = <&pd_lcd0>; }; }; diff --git a/arch/arm/boot/dts/exynos4412-odroidu3.dts b/arch/arm/boot/dts/exynos4412-odroidu3.dts index efaf7533e84f..36c369c42b77 100644 --- a/arch/arm/boot/dts/exynos4412-odroidu3.dts +++ b/arch/arm/boot/dts/exynos4412-odroidu3.dts @@ -119,8 +119,8 @@ phys = <&exynos_usbphy 2>, <&exynos_usbphy 3>; phy-names = "hsic0", "hsic1"; - ethernet: usbether@2 { - compatible = "usb0424,9730"; + ethernet: ethernet@2 { + compatible = "usb424,9730"; reg = <2>; local-mac-address = [00 00 00 00 00 00]; /* Filled in by a bootloader */ }; diff --git a/arch/arm/boot/dts/exynos4412-odroidx.dts b/arch/arm/boot/dts/exynos4412-odroidx.dts index a9fada51eb50..1f17cc30ed14 100644 --- a/arch/arm/boot/dts/exynos4412-odroidx.dts +++ b/arch/arm/boot/dts/exynos4412-odroidx.dts @@ -70,19 +70,19 @@ phy-names = "hsic0"; hub@2 { - compatible = "usb0424,3503"; + compatible = "usb424,3503"; reg = <2>; #address-cells = <1>; #size-cells = <0>; hub@1 { - compatible = "usb0424,9514"; + compatible = "usb424,9514"; reg = <1>; #address-cells = <1>; #size-cells = <0>; - ethernet: usbether@1 { - compatible = "usb0424,ec00"; + ethernet: ethernet@1 { + compatible = "usb424,ec00"; reg = <1>; /* Filled in by a bootloader */ local-mac-address = [00 00 00 00 00 00]; diff --git a/arch/arm/boot/dts/exynos5250-smdk5250.dts b/arch/arm/boot/dts/exynos5250-smdk5250.dts index 21fbbf3d8684..71293749ac48 100644 --- a/arch/arm/boot/dts/exynos5250-smdk5250.dts +++ b/arch/arm/boot/dts/exynos5250-smdk5250.dts @@ -129,7 +129,7 @@ samsung,i2c-max-bus-freq = <20000>; eeprom@50 { - compatible = "samsung,s524ad0xd1"; + compatible = "samsung,s524ad0xd1", "atmel,24c128"; reg = <0x50>; }; @@ -289,7 +289,7 @@ samsung,i2c-max-bus-freq = <20000>; eeprom@51 { - compatible = "samsung,s524ad0xd1"; + compatible = "samsung,s524ad0xd1", "atmel,24c128"; reg = <0x51>; }; diff --git a/arch/arm/boot/dts/exynos5250.dtsi b/arch/arm/boot/dts/exynos5250.dtsi index 5baaa7eb71a4..4708dcd575a7 100644 --- a/arch/arm/boot/dts/exynos5250.dtsi +++ b/arch/arm/boot/dts/exynos5250.dtsi @@ -245,7 +245,8 @@ }; timer@101c0000 { - compatible = "samsung,exynos4210-mct"; + compatible = "samsung,exynos5250-mct", + "samsung,exynos4210-mct"; reg = <0x101C0000 0x800>; clocks = <&clock CLK_FIN_PLL>, <&clock CLK_MCT>; clock-names = "fin_pll", "mct"; @@ -699,8 +700,6 @@ clocks = <&clock CLK_PDMA0>; clock-names = "apb_pclk"; #dma-cells = <1>; - #dma-channels = <8>; - #dma-requests = <32>; }; pdma1: dma-controller@121b0000 { @@ -710,8 +709,6 @@ clocks = <&clock CLK_PDMA1>; clock-names = "apb_pclk"; #dma-cells = <1>; - #dma-channels = <8>; - #dma-requests = <32>; }; mdma0: dma-controller@10800000 { @@ -721,8 +718,6 @@ clocks = <&clock CLK_MDMA0>; clock-names = "apb_pclk"; #dma-cells = <1>; - #dma-channels = <8>; - #dma-requests = <1>; }; mdma1: dma-controller@11c10000 { @@ -732,8 +727,6 @@ clocks = <&clock CLK_MDMA1>; clock-names = "apb_pclk"; #dma-cells = <1>; - #dma-channels = <8>; - #dma-requests = <1>; }; gsc_0: gsc@13e00000 { @@ -817,15 +810,14 @@ status = "disabled"; }; - dp_phy: video-phy { + dp_phy: video-phy-0 { compatible = "samsung,exynos5250-dp-video-phy"; samsung,pmu-syscon = <&pmu_system_controller>; #phy-cells = <0>; }; - mipi_phy: video-phy@10040710 { + mipi_phy: video-phy-1 { compatible = "samsung,s5pv210-mipi-video-phy"; - reg = <0x10040710 0x100>; #phy-cells = <1>; syscon = <&pmu_system_controller>; }; diff --git a/arch/arm/boot/dts/exynos5260.dtsi b/arch/arm/boot/dts/exynos5260.dtsi index 56271e7c4587..ff1ee409eff3 100644 --- a/arch/arm/boot/dts/exynos5260.dtsi +++ b/arch/arm/boot/dts/exynos5260.dtsi @@ -333,7 +333,8 @@ }; mct: timer@100b0000 { - compatible = "samsung,exynos4210-mct"; + compatible = "samsung,exynos5260-mct", + "samsung,exynos4210-mct"; reg = <0x100B0000 0x1000>; clocks = <&fin_pll>, <&clock_peri PERI_CLK_MCT>; clock-names = "fin_pll", "mct"; diff --git a/arch/arm/boot/dts/exynos5410-odroidxu.dts b/arch/arm/boot/dts/exynos5410-odroidxu.dts index e54a3391854d..d1cbc6b8a570 100644 --- a/arch/arm/boot/dts/exynos5410-odroidxu.dts +++ b/arch/arm/boot/dts/exynos5410-odroidxu.dts @@ -655,8 +655,8 @@ #address-cells = <1>; #size-cells = <0>; - ethernet: usbether@2 { - compatible = "usb0424,9730"; + ethernet: ethernet@2 { + compatible = "usb424,9730"; reg = <2>; local-mac-address = [00 00 00 00 00 00]; /* Filled in by a bootloader */ }; diff --git a/arch/arm/boot/dts/exynos5410.dtsi b/arch/arm/boot/dts/exynos5410.dtsi index 4d797a9abba4..8a6b890fb8f7 100644 --- a/arch/arm/boot/dts/exynos5410.dtsi +++ b/arch/arm/boot/dts/exynos5410.dtsi @@ -196,8 +196,6 @@ clocks = <&clock CLK_PDMA0>; clock-names = "apb_pclk"; #dma-cells = <1>; - #dma-channels = <8>; - #dma-requests = <32>; }; pdma1: dma-controller@121b0000 { @@ -207,8 +205,6 @@ clocks = <&clock CLK_PDMA1>; clock-names = "apb_pclk"; #dma-cells = <1>; - #dma-channels = <8>; - #dma-requests = <32>; }; audi2s0: i2s@3830000 { diff --git a/arch/arm/boot/dts/exynos5420.dtsi b/arch/arm/boot/dts/exynos5420.dtsi index 21b608705049..9f2523a873d9 100644 --- a/arch/arm/boot/dts/exynos5420.dtsi +++ b/arch/arm/boot/dts/exynos5420.dtsi @@ -437,8 +437,6 @@ clocks = <&clock_audss EXYNOS_ADMA>; clock-names = "apb_pclk"; #dma-cells = <1>; - #dma-channels = <6>; - #dma-requests = <16>; power-domains = <&mau_pd>; }; @@ -449,8 +447,6 @@ clocks = <&clock CLK_PDMA0>; clock-names = "apb_pclk"; #dma-cells = <1>; - #dma-channels = <8>; - #dma-requests = <32>; }; pdma1: dma-controller@121b0000 { @@ -460,8 +456,6 @@ clocks = <&clock CLK_PDMA1>; clock-names = "apb_pclk"; #dma-cells = <1>; - #dma-channels = <8>; - #dma-requests = <32>; }; mdma0: dma-controller@10800000 { @@ -471,8 +465,6 @@ clocks = <&clock CLK_MDMA0>; clock-names = "apb_pclk"; #dma-cells = <1>; - #dma-channels = <8>; - #dma-requests = <1>; }; mdma1: dma-controller@11c10000 { @@ -482,8 +474,6 @@ clocks = <&clock CLK_MDMA1>; clock-names = "apb_pclk"; #dma-cells = <1>; - #dma-channels = <8>; - #dma-requests = <1>; /* * MDMA1 can support both secure and non-secure * AXI transactions. When this is enabled in diff --git a/arch/arm/boot/dts/exynos5422-odroid-core.dtsi b/arch/arm/boot/dts/exynos5422-odroid-core.dtsi index 2f65dcf6ba73..35818c4cd852 100644 --- a/arch/arm/boot/dts/exynos5422-odroid-core.dtsi +++ b/arch/arm/boot/dts/exynos5422-odroid-core.dtsi @@ -333,8 +333,6 @@ compatible = "samsung,K3QF2F20DB", "jedec,lpddr3"; density = <16384>; io-width = <32>; - #address-cells = <1>; - #size-cells = <0>; tRFC-min-tck = <17>; tRRD-min-tck = <2>; @@ -358,10 +356,9 @@ tCKESR-min-tck = <2>; tMRD-min-tck = <5>; - timings_samsung_K3QF2F20DB_800mhz: timings@800000000 { + timings_samsung_K3QF2F20DB_800mhz: timings { compatible = "jedec,lpddr3-timings"; - /* workaround: 'reg' shows max-freq */ - reg = <800000000>; + max-freq = <800000000>; min-freq = <100000000>; tRFC = <65000>; tRRD = <6000>; diff --git a/arch/arm/boot/dts/exynos5422-odroidxu3-lite.dts b/arch/arm/boot/dts/exynos5422-odroidxu3-lite.dts index 62c5928aa994..e3154a1cae23 100644 --- a/arch/arm/boot/dts/exynos5422-odroidxu3-lite.dts +++ b/arch/arm/boot/dts/exynos5422-odroidxu3-lite.dts @@ -113,13 +113,13 @@ #size-cells = <0>; hub@1 { - compatible = "usb0424,9514"; + compatible = "usb424,9514"; reg = <1>; #address-cells = <1>; #size-cells = <0>; - ethernet: usbether@1 { - compatible = "usb0424,ec00"; + ethernet: ethernet@1 { + compatible = "usb424,ec00"; reg = <1>; local-mac-address = [00 00 00 00 00 00]; /* Filled in by a bootloader */ }; diff --git a/arch/arm/boot/dts/exynos5422-odroidxu3.dts b/arch/arm/boot/dts/exynos5422-odroidxu3.dts index cecaeb69e623..a378d4937ff7 100644 --- a/arch/arm/boot/dts/exynos5422-odroidxu3.dts +++ b/arch/arm/boot/dts/exynos5422-odroidxu3.dts @@ -80,13 +80,13 @@ #size-cells = <0>; hub@1 { - compatible = "usb0424,9514"; + compatible = "usb424,9514"; reg = <1>; #address-cells = <1>; #size-cells = <0>; - ethernet: usbether@1 { - compatible = "usb0424,ec00"; + ethernet: ethernet@1 { + compatible = "usb424,ec00"; reg = <1>; local-mac-address = [00 00 00 00 00 00]; /* Filled in by a bootloader */ }; diff --git a/arch/arm/boot/dts/exynos54xx.dtsi b/arch/arm/boot/dts/exynos54xx.dtsi index 2ddb7a5f12b3..3ec43761d8b9 100644 --- a/arch/arm/boot/dts/exynos54xx.dtsi +++ b/arch/arm/boot/dts/exynos54xx.dtsi @@ -74,7 +74,8 @@ }; mct: timer@101c0000 { - compatible = "samsung,exynos4210-mct"; + compatible = "samsung,exynos5420-mct", + "samsung,exynos4210-mct"; reg = <0x101c0000 0xb00>; interrupts-extended = <&combiner 23 3>, <&combiner 23 4>, diff --git a/arch/arm/boot/dts/imx27.dtsi b/arch/arm/boot/dts/imx27.dtsi index fd525c3b16fa..b660c7d05584 100644 --- a/arch/arm/boot/dts/imx27.dtsi +++ b/arch/arm/boot/dts/imx27.dtsi @@ -96,7 +96,7 @@ <&clks IMX27_CLK_DMA_AHB_GATE>; clock-names = "ipg", "ahb"; #dma-cells = <1>; - #dma-channels = <16>; + dma-channels = <16>; }; wdog: watchdog@10002000 { diff --git a/arch/arm/boot/dts/imx28-evk.dts b/arch/arm/boot/dts/imx28-evk.dts index 7e2b0f198dfa..1053b7c584d8 100644 --- a/arch/arm/boot/dts/imx28-evk.dts +++ b/arch/arm/boot/dts/imx28-evk.dts @@ -129,7 +129,7 @@ pinctrl-0 = <&spi2_pins_a>; status = "okay"; - flash: m25p80@0 { + flash: flash@0 { #address-cells = <1>; #size-cells = <1>; compatible = "sst,sst25vf016b", "jedec,spi-nor"; diff --git a/arch/arm/boot/dts/imx28-m28evk.dts b/arch/arm/boot/dts/imx28-m28evk.dts index f3bddc5ada4b..13acdc7916b9 100644 --- a/arch/arm/boot/dts/imx28-m28evk.dts +++ b/arch/arm/boot/dts/imx28-m28evk.dts @@ -33,7 +33,7 @@ pinctrl-0 = <&spi2_pins_a>; status = "okay"; - flash: m25p80@0 { + flash: flash@0 { #address-cells = <1>; #size-cells = <1>; compatible = "m25p80", "jedec,spi-nor"; diff --git a/arch/arm/boot/dts/imx28-sps1.dts b/arch/arm/boot/dts/imx28-sps1.dts index 43be7a6a769b..90928db0df70 100644 --- a/arch/arm/boot/dts/imx28-sps1.dts +++ b/arch/arm/boot/dts/imx28-sps1.dts @@ -51,7 +51,7 @@ pinctrl-0 = <&spi2_pins_a>; status = "okay"; - flash: m25p80@0 { + flash: flash@0 { #address-cells = <1>; #size-cells = <1>; compatible = "everspin,mr25h256", "mr25h256"; diff --git a/arch/arm/boot/dts/imx51-digi-connectcore-jsk.dts b/arch/arm/boot/dts/imx51-digi-connectcore-jsk.dts index aab8d6f137c3..10cae7c3a879 100644 --- a/arch/arm/boot/dts/imx51-digi-connectcore-jsk.dts +++ b/arch/arm/boot/dts/imx51-digi-connectcore-jsk.dts @@ -13,6 +13,13 @@ chosen { stdout-path = &uart1; }; + + usbphy1: usbphy1 { + compatible = "usb-nop-xceiv"; + clocks = <&clks IMX5_CLK_USB_PHY_GATE>; + clock-names = "main_clk"; + #phy-cells = <0>; + }; }; &esdhc1 { @@ -63,6 +70,7 @@ &usbh1 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_usbh1>; + fsl,usbphy = <&usbphy1>; dr_mode = "host"; phy_type = "ulpi"; disable-over-current; diff --git a/arch/arm/boot/dts/imx51-digi-connectcore-som.dtsi b/arch/arm/boot/dts/imx51-digi-connectcore-som.dtsi index 7d4970417dce..f0809a16a2ce 100644 --- a/arch/arm/boot/dts/imx51-digi-connectcore-som.dtsi +++ b/arch/arm/boot/dts/imx51-digi-connectcore-som.dtsi @@ -34,22 +34,22 @@ regulators { sw1_reg: sw1 { - regulator-min-microvolt = <1000000>; + regulator-min-microvolt = <1050000>; regulator-max-microvolt = <1100000>; regulator-boot-on; regulator-always-on; }; sw2_reg: sw2 { - regulator-min-microvolt = <1225000>; - regulator-max-microvolt = <1225000>; + regulator-min-microvolt = <1175000>; + regulator-max-microvolt = <1275000>; regulator-boot-on; regulator-always-on; }; sw3_reg: sw3 { - regulator-min-microvolt = <1200000>; - regulator-max-microvolt = <1200000>; + regulator-min-microvolt = <1150000>; + regulator-max-microvolt = <1350000>; regulator-boot-on; regulator-always-on; }; @@ -102,18 +102,6 @@ regulator-always-on; }; - vgen1_reg: vgen1 { - regulator-min-microvolt = <1200000>; - regulator-max-microvolt = <1200000>; - regulator-always-on; - }; - - vgen2_reg: vgen2 { - regulator-min-microvolt = <3150000>; - regulator-max-microvolt = <3150000>; - regulator-always-on; - }; - vgen3_reg: vgen3 { regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; @@ -124,8 +112,6 @@ regulator-always-on; }; - gpo1_reg: gpo1 { }; - gpo2_reg: gpo2 { }; gpo3_reg: gpo3 { }; @@ -198,6 +184,7 @@ &usbotg { phy_type = "utmi_wide"; disable-over-current; + vbus-supply = <&swbst_reg>; /* Device role is not known, keep status disabled */ }; diff --git a/arch/arm/boot/dts/imx51.dtsi b/arch/arm/boot/dts/imx51.dtsi index 56c8d87864c3..1e20a6639e42 100644 --- a/arch/arm/boot/dts/imx51.dtsi +++ b/arch/arm/boot/dts/imx51.dtsi @@ -215,6 +215,8 @@ clocks = <&clks IMX5_CLK_UART3_IPG_GATE>, <&clks IMX5_CLK_UART3_PER_GATE>; clock-names = "ipg", "per"; + dmas = <&sdma 43 5 1>, <&sdma 44 5 2>; + dma-names = "rx", "tx"; status = "disabled"; }; @@ -426,6 +428,8 @@ clocks = <&clks IMX5_CLK_UART1_IPG_GATE>, <&clks IMX5_CLK_UART1_PER_GATE>; clock-names = "ipg", "per"; + dmas = <&sdma 18 4 1>, <&sdma 19 4 2>; + dma-names = "rx", "tx"; status = "disabled"; }; @@ -436,6 +440,8 @@ clocks = <&clks IMX5_CLK_UART2_IPG_GATE>, <&clks IMX5_CLK_UART2_PER_GATE>; clock-names = "ipg", "per"; + dmas = <&sdma 16 4 1>, <&sdma 17 4 2>; + dma-names = "rx", "tx"; status = "disabled"; }; diff --git a/arch/arm/boot/dts/imx6dl-colibri-aster.dts b/arch/arm/boot/dts/imx6dl-colibri-aster.dts new file mode 100644 index 000000000000..74e8a6cd8bed --- /dev/null +++ b/arch/arm/boot/dts/imx6dl-colibri-aster.dts @@ -0,0 +1,113 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT +/* + * Copyright 2022 Toradex + */ + +/dts-v1/; + +#include <dt-bindings/input/input.h> +#include <dt-bindings/interrupt-controller/irq.h> +#include "imx6dl.dtsi" +#include "imx6qdl-colibri.dtsi" + +/ { + model = "Toradex Colibri iMX6DL/S on Colibri Aster Board"; + compatible = "toradex,colibri_imx6dl-aster", "toradex,colibri_imx6dl", + "fsl,imx6dl"; + + aliases { + i2c0 = &i2c2; + i2c1 = &i2c3; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; +}; + +/* Colibri SSP */ +&ecspi4 { + cs-gpios = < + &gpio5 2 GPIO_ACTIVE_HIGH + &gpio5 4 GPIO_ACTIVE_HIGH + >; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_ecspi4 &pinctrl_csi_gpio_2>; + status = "okay"; +}; + +/* Colibri I2C: I2C3_SDA/SCL on SODIMM 194/196 */ +&i2c3 { + status = "okay"; +}; + +&iomuxc { + pinctrl-names = "default"; + pinctrl-0 = < + &pinctrl_csi_gpio_1 + &pinctrl_gpio_2 + &pinctrl_gpio_aster + &pinctrl_usbh_oc_1 + &pinctrl_usbc_id_1 + &pinctrl_weim_gpio_5 + >; + + pinctrl_gpio_aster: gpioaster { + fsl,pins = < + MX6QDL_PAD_KEY_COL2__GPIO4_IO10 0x1b0b0 + MX6QDL_PAD_KEY_ROW2__GPIO4_IO11 0x1b0b0 + MX6QDL_PAD_KEY_ROW4__GPIO4_IO15 0x1b0b0 + MX6QDL_PAD_NANDF_D1__GPIO2_IO01 0x1b0b0 + MX6QDL_PAD_NANDF_D3__GPIO2_IO03 0x1b0b0 + MX6QDL_PAD_NANDF_D6__GPIO2_IO06 0x1b0b0 + MX6QDL_PAD_SD4_DAT0__GPIO2_IO08 0x1b0b0 + MX6QDL_PAD_SD4_DAT3__GPIO2_IO11 0x1b0b0 + >; + }; +}; + +&pwm1 { + status = "okay"; +}; + +&pwm2 { + status = "okay"; +}; + +&pwm3 { + status = "okay"; +}; + +&pwm4 { + status = "okay"; +}; + +®_usb_host_vbus { + status = "okay"; +}; + +&uart1 { + status = "okay"; +}; + +&uart2 { + status = "okay"; +}; + +&uart3 { + status = "okay"; +}; + +&usbh1 { + vbus-supply = <®_usb_host_vbus>; + status = "okay"; +}; + +&usbotg { + status = "okay"; +}; + +/* Colibri MMC */ +&usdhc1 { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/imx6dl-colibri-eval-v3.dts b/arch/arm/boot/dts/imx6dl-colibri-eval-v3.dts index 7da74e6f46d9..7272edd85a49 100644 --- a/arch/arm/boot/dts/imx6dl-colibri-eval-v3.dts +++ b/arch/arm/boot/dts/imx6dl-colibri-eval-v3.dts @@ -1,6 +1,6 @@ -// SPDX-License-Identifier: GPL-2.0+ OR MIT +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT /* - * Copyright 2014-2020 Toradex + * Copyright 2014-2022 Toradex * Copyright 2012 Freescale Semiconductor, Inc. * Copyright 2011 Linaro Ltd. */ @@ -17,12 +17,6 @@ compatible = "toradex,colibri_imx6dl-eval-v3", "toradex,colibri_imx6dl", "fsl,imx6dl"; - /* Will be filled by the bootloader */ - memory@10000000 { - device_type = "memory"; - reg = <0x10000000 0>; - }; - aliases { i2c0 = &i2c2; i2c1 = &i2c3; @@ -44,67 +38,6 @@ clock-frequency = <16000000>; clock-output-names = "clk16m"; }; - - gpio-keys { - compatible = "gpio-keys"; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_gpio_keys>; - - wakeup { - label = "Wake-Up"; - gpios = <&gpio2 22 GPIO_ACTIVE_HIGH>; /* SODIMM 45 */ - linux,code = <KEY_WAKEUP>; - debounce-interval = <10>; - wakeup-source; - }; - }; - - lcd_display: disp0 { - compatible = "fsl,imx-parallel-display"; - #address-cells = <1>; - #size-cells = <0>; - interface-pix-fmt = "bgr666"; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_ipu1_lcdif>; - status = "okay"; - - port@0 { - reg = <0>; - - lcd_display_in: endpoint { - remote-endpoint = <&ipu1_di0_disp0>; - }; - }; - - port@1 { - reg = <1>; - - lcd_display_out: endpoint { - remote-endpoint = <&lcd_panel_in>; - }; - }; - }; - - panel: panel { - /* - * edt,et057090dhu: EDT 5.7" LCD TFT - * edt,et070080dh6: EDT 7.0" LCD TFT - */ - compatible = "edt,et057090dhu"; - backlight = <&backlight>; - - port { - lcd_panel_in: endpoint { - remote-endpoint = <&lcd_display_out>; - }; - }; - }; -}; - -&backlight { - brightness-levels = <0 127 191 223 239 247 251 255>; - default-brightness-level = <1>; - status = "okay"; }; /* Colibri SSP */ @@ -113,40 +46,21 @@ mcp251x0: mcp251x@0 { compatible = "microchip,mcp2515"; - reg = <0>; clocks = <&clk16m>; interrupt-parent = <&gpio3>; interrupts = <27 0x2>; + reg = <0>; spi-max-frequency = <10000000>; status = "okay"; }; }; -&hdmi { - status = "okay"; -}; - /* * Colibri I2C: I2C3_SDA/SCL on SODIMM 194/196 (e.g. RTC on carrier board) */ &i2c3 { status = "okay"; - /* - * Touchscreen is using SODIMM 28/30, also used for PWM<B>, PWM<C>, - * aka pwm2, pwm3. so if you enable touchscreen, disable the pwms - */ - touchscreen@4a { - compatible = "atmel,maxtouch"; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_pcap_1>; - reg = <0x4a>; - interrupt-parent = <&gpio1>; - interrupts = <9 IRQ_TYPE_EDGE_FALLING>; /* SODIMM 28 */ - reset-gpios = <&gpio2 10 GPIO_ACTIVE_LOW>; /* SODIMM 30 */ - status = "disabled"; - }; - /* M41T0M6 real time clock on carrier board */ rtc_i2c: rtc@68 { compatible = "st,m41t0"; @@ -162,24 +76,6 @@ &pinctrl_weim_gpio_5 &pinctrl_weim_gpio_6 &pinctrl_usbh_oc_1 &pinctrl_usbc_id_1 >; - - pinctrl_pcap_1: pcap1grp { - fsl,pins = < - MX6QDL_PAD_GPIO_9__GPIO1_IO09 0x1b0b0 /* SODIMM 28 */ - MX6QDL_PAD_SD4_DAT2__GPIO2_IO10 0x1b0b0 /* SODIMM 30 */ - >; - }; - - pinctrl_mxt_ts: mxttsgrp { - fsl,pins = < - MX6QDL_PAD_EIM_CS1__GPIO2_IO24 0x130b0 /* SODIMM 107 */ - MX6QDL_PAD_SD2_DAT1__GPIO1_IO14 0x130b0 /* SODIMM 106 */ - >; - }; -}; - -&ipu1_di0_disp0 { - remote-endpoint = <&lcd_display_in>; }; &pwm1 { diff --git a/arch/arm/boot/dts/imx6dl-colibri-iris-v2.dts b/arch/arm/boot/dts/imx6dl-colibri-iris-v2.dts new file mode 100644 index 000000000000..3a6d3889760d --- /dev/null +++ b/arch/arm/boot/dts/imx6dl-colibri-iris-v2.dts @@ -0,0 +1,46 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT +/* + * Copyright 2022 Toradex + */ + +/dts-v1/; + +#include "imx6dl-colibri-iris.dts" + +/ { + model = "Toradex Colibri iMX6DL/S on Colibri Iris V2 Board"; + compatible = "toradex,colibri_imx6dl-iris-v2", "toradex,colibri_imx6dl", + "fsl,imx6dl"; + + reg_3v3_vmmc: regulator-3v3-vmmc { + compatible = "regulator-fixed"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_enable_3v3_vmmc>; + regulator-name = "3v3_vmmc"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + gpio = <&gpio2 11 GPIO_ACTIVE_HIGH>; + startup-delay-us = <100>; + enable-active-high; + }; +}; + +&iomuxc { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_gpio_iris &pinctrl_usbh_oc_1 &pinctrl_usbc_id_1>; + + pinctrl_enable_3v3_vmmc: enable3v3vmmcgrp { + fsl,pins = < + MX6QDL_PAD_SD4_DAT3__GPIO2_IO11 0x1b0b0 + >; + }; +}; + +/* Colibri MMC */ +&usdhc1 { + cap-power-off-card; + /* uncomment the following to enable SD card UHS mode if you have a V1.1 module */ + /* /delete-property/ no-1-8-v; */ + vmmc-supply = <®_3v3_vmmc>; + status = "okay"; +}; diff --git a/arch/arm/boot/dts/imx6dl-colibri-iris.dts b/arch/arm/boot/dts/imx6dl-colibri-iris.dts new file mode 100644 index 000000000000..cf77d894f6d7 --- /dev/null +++ b/arch/arm/boot/dts/imx6dl-colibri-iris.dts @@ -0,0 +1,152 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT +/* + * Copyright 2022 Toradex + */ + +/dts-v1/; + +#include <dt-bindings/input/input.h> +#include <dt-bindings/interrupt-controller/irq.h> +#include "imx6dl.dtsi" +#include "imx6qdl-colibri.dtsi" + +/ { + model = "Toradex Colibri iMX6DL/S on Colibri Iris Board"; + compatible = "toradex,colibri_imx6dl-iris", "toradex,colibri_imx6dl", + "fsl,imx6dl"; + + aliases { + i2c0 = &i2c2; + i2c1 = &i2c3; + }; + + aliases { + rtc0 = &rtc_i2c; + rtc1 = &snvs_rtc; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; +}; + +/* Colibri SSP */ +&ecspi4 { + status = "okay"; +}; + +&gpio2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart1_forceoff &pinctrl_uart23_forceoff>; + + /* + * uart-a-on-x13-enable turns the UART transceiver for UART_A on. If one + * wants to turn the transceiver off, that property has to be deleted + * and the gpio handled in userspace. + * The same applies to uart-b-c-on-x14-enable where the UART_B and + * UART_C transceiver is turned on. + */ + uart-a-on-x13-enable-hog { + gpio-hog; + gpios = <4 GPIO_ACTIVE_HIGH>; /* SODIMM 102 */ + output-high; + }; + + uart-b-c-on-x14-enable-hog { + gpio-hog; + gpios = <8 GPIO_ACTIVE_HIGH>; /* SODIMM 104 */ + output-high; + }; +}; + +/* + * Colibri I2C: I2C3_SDA/SCL on SODIMM 194/196 (e.g. RTC on carrier board) + */ +&i2c3 { + status = "okay"; + + rtc_i2c: rtc@68 { + compatible = "st,m41t0"; + reg = <0x68>; + }; +}; + +&iomuxc { + pinctrl-names = "default"; + pinctrl-0 = < + &pinctrl_gpio_iris + &pinctrl_usbh_oc_1 + &pinctrl_usbc_id_1 + >; + + pinctrl_gpio_iris: gpioirisgrp { + fsl,pins = < + MX6QDL_PAD_EIM_A17__GPIO2_IO21 0x1b0b0 + MX6QDL_PAD_EIM_A18__GPIO2_IO20 0x1b0b0 + MX6QDL_PAD_EIM_A19__GPIO2_IO19 0x1b0b0 + MX6QDL_PAD_EIM_A20__GPIO2_IO18 0x1b0b0 + MX6QDL_PAD_EIM_A23__GPIO6_IO06 0x1b0b0 + MX6QDL_PAD_EIM_D27__GPIO3_IO27 0x1b0b0 + MX6QDL_PAD_NANDF_D3__GPIO2_IO03 0x1b0b0 + MX6QDL_PAD_SD2_DAT0__GPIO1_IO15 0x1b0b0 + >; + }; + + pinctrl_uart1_forceoff: uart1forceoffgrp { + fsl,pins = < + MX6QDL_PAD_NANDF_D4__GPIO2_IO04 0x1b0b0 + >; + }; + + pinctrl_uart23_forceoff: uart23forceoffgrp { + fsl,pins = < + MX6QDL_PAD_SD4_DAT0__GPIO2_IO08 0x1b0b0 + >; + }; +}; + +&pwm1 { + status = "okay"; +}; + +&pwm2 { + status = "okay"; +}; + +&pwm3 { + status = "okay"; +}; + +&pwm4 { + status = "okay"; +}; + +®_usb_host_vbus { + status = "okay"; +}; + +&uart1 { + status = "okay"; +}; + +&uart2 { + status = "okay"; +}; + +&uart3 { + status = "okay"; +}; + +&usbh1 { + vbus-supply = <®_usb_host_vbus>; + status = "okay"; +}; + +&usbotg { + status = "okay"; +}; + +/* Colibri MMC */ +&usdhc1 { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/imx6dl-colibri-v1_1-eval-v3.dts b/arch/arm/boot/dts/imx6dl-colibri-v1_1-eval-v3.dts deleted file mode 100644 index 223275f028f1..000000000000 --- a/arch/arm/boot/dts/imx6dl-colibri-v1_1-eval-v3.dts +++ /dev/null @@ -1,31 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0+ OR MIT -/* - * Copyright 2020 Toradex - */ - -/dts-v1/; - -#include "imx6dl-colibri-eval-v3.dts" -#include "imx6qdl-colibri-v1_1-uhs.dtsi" - -/ { - model = "Toradex Colibri iMX6DL/S V1.1 on Colibri Evaluation Board V3"; - compatible = "toradex,colibri_imx6dl-v1_1-eval-v3", - "toradex,colibri_imx6dl-v1_1", - "toradex,colibri_imx6dl-eval-v3", - "toradex,colibri_imx6dl", - "fsl,imx6dl"; -}; - -/* Colibri MMC */ -&usdhc1 { - status = "okay"; - /* - * Please make sure your carrier board does not pull-up any of - * the MMC/SD signals to 3.3 volt before attempting to activate - * UHS-I support. - * To let signaling voltage be changed to 1.8V, please - * delete no-1-8-v property (example below): - * /delete-property/no-1-8-v; - */ -}; diff --git a/arch/arm/boot/dts/imx6dl-eckelmann-ci4x10.dts b/arch/arm/boot/dts/imx6dl-eckelmann-ci4x10.dts index b4a9523e325b..864dc5018451 100644 --- a/arch/arm/boot/dts/imx6dl-eckelmann-ci4x10.dts +++ b/arch/arm/boot/dts/imx6dl-eckelmann-ci4x10.dts @@ -297,7 +297,11 @@ phy-mode = "rmii"; phy-reset-gpios = <&gpio1 18 GPIO_ACTIVE_LOW>; phy-handle = <&phy>; - clocks = <&clks IMX6QDL_CLK_ENET>, <&clks IMX6QDL_CLK_ENET>, <&rmii_clk>; + clocks = <&clks IMX6QDL_CLK_ENET>, + <&clks IMX6QDL_CLK_ENET>, + <&rmii_clk>, + <&clks IMX6QDL_CLK_ENET_REF>; + clock-names = "ipg", "ahb", "ptp", "enet_out"; status = "okay"; mdio { diff --git a/arch/arm/boot/dts/imx6dl-plybas.dts b/arch/arm/boot/dts/imx6dl-plybas.dts index bf72a67a9c76..c52e6caf3996 100644 --- a/arch/arm/boot/dts/imx6dl-plybas.dts +++ b/arch/arm/boot/dts/imx6dl-plybas.dts @@ -214,7 +214,7 @@ &uart2 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_uart2>; - fsl,uart-has-rtscts; + uart-has-rtscts; linux,rs485-enabled-at-boot-time; rs485-rts-delay = <0 20>; status = "okay"; diff --git a/arch/arm/boot/dts/imx6dl-rex-basic.dts b/arch/arm/boot/dts/imx6dl-rex-basic.dts index 0f1616bfa9a8..b72f8ea1e6f6 100644 --- a/arch/arm/boot/dts/imx6dl-rex-basic.dts +++ b/arch/arm/boot/dts/imx6dl-rex-basic.dts @@ -19,7 +19,7 @@ }; &ecspi3 { - flash: m25p80@0 { + flash: flash@0 { compatible = "sst,sst25vf016b", "jedec,spi-nor"; spi-max-frequency = <20000000>; reg = <0>; diff --git a/arch/arm/boot/dts/imx6dl-victgo.dts b/arch/arm/boot/dts/imx6dl-victgo.dts index 227c952543d4..516ec915a911 100644 --- a/arch/arm/boot/dts/imx6dl-victgo.dts +++ b/arch/arm/boot/dts/imx6dl-victgo.dts @@ -5,46 +5,13 @@ */ /dts-v1/; -#include <dt-bindings/display/sdtv-standards.h> -#include <dt-bindings/gpio/gpio.h> -#include <dt-bindings/input/input.h> -#include <dt-bindings/leds/common.h> -#include <dt-bindings/media/tvp5150.h> -#include <dt-bindings/sound/fsl-imx-audmux.h> #include "imx6dl.dtsi" +#include "imx6qdl-vicut1.dtsi" / { model = "Kverneland TGO"; compatible = "kvg,victgo", "fsl,imx6dl"; - chosen { - stdout-path = &uart4; - }; - - backlight: backlight { - compatible = "pwm-backlight"; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_backlight>; - pwms = <&pwm1 0 5000000 0>; - brightness-levels = <0 16 64 255>; - num-interpolated-steps = <16>; - default-brightness-level = <1>; - power-supply = <®_3v3>; - enable-gpios = <&gpio4 28 GPIO_ACTIVE_HIGH>; - }; - - connector { - compatible = "composite-video-connector"; - label = "Composite0"; - sdtv-standards = <SDTV_STD_PAL_B>; - - port { - comp0_out: endpoint { - remote-endpoint = <&tvp5150_comp0_in>; - }; - }; - }; - gpio-keys { compatible = "gpio-keys"; pinctrl-names = "default"; @@ -71,36 +38,9 @@ io-channels = <&vdiv_vaccu>, <&vdiv_hitch_pos>; }; - leds { - compatible = "gpio-leds"; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_leds>; - - led-0 { - label = "debug0"; - function = LED_FUNCTION_HEARTBEAT; - gpios = <&gpio1 8 GPIO_ACTIVE_HIGH>; - linux,default-trigger = "heartbeat"; - }; - - led-1 { - label = "debug1"; - function = LED_FUNCTION_DISK; - gpios = <&gpio1 9 GPIO_ACTIVE_HIGH>; - linux,default-trigger = "disk-activity"; - }; - - led-2 { - label = "power_led"; - function = LED_FUNCTION_POWER; - gpios = <&gpio2 24 GPIO_ACTIVE_HIGH>; - default-state = "on"; - }; - }; - panel { - compatible = "kyo,tcg121xglp"; - backlight = <&backlight>; + compatible = "lg,lb070wv8"; + backlight = <&backlight_lcd>; power-supply = <®_3v3>; port { @@ -116,38 +56,6 @@ clock-frequency = <50000000>; }; - reg_1v8: regulator-1v8 { - compatible = "regulator-fixed"; - regulator-name = "1v8"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - }; - - reg_3v3: regulator-3v3 { - compatible = "regulator-fixed"; - regulator-name = "3v3"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - }; - - reg_h1_vbus: regulator-h1-vbus { - compatible = "regulator-fixed"; - regulator-name = "h1-vbus"; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - gpio = <&gpio1 0 GPIO_ACTIVE_HIGH>; - enable-active-high; - }; - - reg_otg_vbus: regulator-otg-vbus { - compatible = "regulator-fixed"; - regulator-name = "otg-vbus"; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - gpio = <&gpio3 22 GPIO_ACTIVE_HIGH>; - enable-active-high; - }; - rotary-encoder { compatible = "rotary-encoder"; pinctrl-0 = <&pinctrl_rotary_ch>; @@ -160,33 +68,6 @@ wakeup-source; }; - sound { - compatible = "simple-audio-card"; - simple-audio-card,name = "prti6q-sgtl5000"; - simple-audio-card,format = "i2s"; - simple-audio-card,widgets = - "Microphone", "Microphone Jack", - "Line", "Line In Jack", - "Headphone", "Headphone Jack", - "Speaker", "External Speaker"; - simple-audio-card,routing = - "MIC_IN", "Microphone Jack", - "LINE_IN", "Line In Jack", - "Headphone Jack", "HP_OUT", - "External Speaker", "LINE_OUT"; - - simple-audio-card,cpu { - sound-dai = <&ssi1>; - system-clock-frequency = <0>; - }; - - simple-audio-card,codec { - sound-dai = <&codec>; - bitclock-master; - frame-master; - }; - }; - thermal-zones { chassis-thermal { polling-delay = <20000>; @@ -213,7 +94,6 @@ <&adc_ts 5>; io-channel-names = "y", "z1", "z2", "x"; touchscreen-min-pressure = <64687>; - touchscreen-inverted-x; touchscreen-inverted-y; touchscreen-x-plate-ohms = <300>; touchscreen-y-plate-ohms = <800>; @@ -254,61 +134,6 @@ }; }; -&audmux { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_audmux>; - status = "okay"; - - mux-ssi1 { - fsl,audmux-port = <0>; - fsl,port-config = < - IMX_AUDMUX_V2_PTCR_SYN 0 - IMX_AUDMUX_V2_PTCR_TFSEL(2) 0 - IMX_AUDMUX_V2_PTCR_TCSEL(2) 0 - IMX_AUDMUX_V2_PTCR_TFSDIR 0 - IMX_AUDMUX_V2_PTCR_TCLKDIR IMX_AUDMUX_V2_PDCR_RXDSEL(2) - >; - }; - - mux-pins3 { - fsl,audmux-port = <2>; - fsl,port-config = < - IMX_AUDMUX_V2_PTCR_SYN IMX_AUDMUX_V2_PDCR_RXDSEL(0) - 0 IMX_AUDMUX_V2_PDCR_TXRXEN - >; - }; -}; - -&can1 { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_can1>; - status = "okay"; -}; - -&can2 { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_can2>; - status = "okay"; -}; - -&clks { - assigned-clocks = <&clks IMX6QDL_CLK_LDB_DI0_SEL>; - assigned-clock-parents = <&clks IMX6QDL_CLK_PLL5_VIDEO_DIV>; -}; - -&ecspi1 { - cs-gpios = <&gpio3 19 GPIO_ACTIVE_LOW>; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_ecspi1>; - status = "okay"; - - flash@0 { - compatible = "jedec,spi-nor"; - reg = <0>; - spi-max-frequency = <20000000>; - }; -}; - &ecspi2 { cs-gpios = <&gpio5 12 GPIO_ACTIVE_LOW>; pinctrl-names = "default"; @@ -385,36 +210,19 @@ "CAM2_MIRROR", "", "", "SMBALERT", "DEBUG_0", "DEBUG_1", "", "", "", "", "", "", "SD1_DATA0", "SD1_DATA1", "SD1_CMD", "SD1_DATA2", "SD1_CLK", - "SD1_DATA3", "", "", - "", "", "", "", "", "", "", ""; -}; - -&gpio2 { - gpio-line-names = - "", "", "", "", "", "", "", "", - "REV_ID0", "REV_ID1", "REV_ID2", "REV_ID3", "REV_ID4", - "BOARD_ID0", "BOARD_ID1", "BOARD_ID2", - "", "", "", "", "", "", "ISB_IN1", "ON_SWITCH", - "POWER_LED", "", "", "", "", "", "", ""; -}; - -&gpio3 { - gpio-line-names = - "", "", "", "", "", "", "", "", - "", "", "", "", "", "", "", "", - "ECSPI1_SCLK", "ECSPI1_MISO", "ECSPI1_MOSI", "ECSPI1_SS1", - "CPU_ON1_FB", "USB_EXT1_OC", "USB_EXT1_PWR", "YACO_IRQ", - "TSS_TXD", "TSS_RXD", "", "", "", "", "YACO_BOOT0", - "YACO_RESET"; + "SD1_DATA3", "ETH_MDIO", "", + "", "", "", "", "", "", "", "ETH_MDC"; }; &gpio4 { gpio-line-names = - "", "", "", "", "", "", "", "", - "", "", "", "", "CAN1_SR", "CAN2_SR", "CAN2_TX", "CAN2_RX", - "", "", "DIP1_FB", "", "VCAM_EN", "", "", "", - "CPU_LIGHT_ON", "", "ETH_RESET", "CPU_CONTACT_IN", "BL_EN", - "BL_PWM", "ETH_INTRP", "ISB_LED"; + "", "", "", "", "", "", "UART4_TXD", "UART4_RXD", + "UART5_TXD", "UART5_RXD", "CAN1_TX", "CAN1_RX", "CAN1_SR", + "CAN2_SR", "CAN2_TX", "CAN2_RX", + "", "", "DIP1_FB", "", "VCAM_EN", "ON1_CTRL", "ON2_CTRL", + "HITCH_IN_OUT", + "LIGHT_ON", "", "ETH_RESET", "CONTACT_IN", "BL_EN", + "BL_PWM", "ETH_INT", "ISB_LED"; }; &gpio5 { @@ -422,51 +230,22 @@ "", "", "", "", "", "", "", "", "TSC_PENIRQ", "TSC_BUSY", "ECSPI2_MOSI", "ECSPI2_MISO", "ECSPI2_SS0", "ECSPI2_SCLK", "", "", - "", "", "", "", "", "", "", "", + "", "", "ITU656_CLK", "I2S_MCLK", "ITU656_PDN", "AUDIO_RESET", + "I2S_BITCLK", "I2S_DOUT", "I2S_LRCLK", "I2S_DIN", "I2C1_SDA", "I2C1_SCL", "YACO_AUX_RX", "YACO_AUX_TX", "ITU656_D0", "ITU656_D1"; }; -&i2c1 { - clock-frequency = <100000>; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_i2c1>; - status = "okay"; - - codec: audio-codec@a { - compatible = "fsl,sgtl5000"; - reg = <0xa>; - #sound-dai-cells = <0>; - clocks = <&clks 201>; - VDDA-supply = <®_3v3>; - VDDIO-supply = <®_3v3>; - VDDD-supply = <®_1v8>; - }; - - video-decoder@5c { - compatible = "ti,tvp5150"; - reg = <0x5c>; - #address-cells = <1>; - #size-cells = <0>; - - port@0 { - reg = <0>; - - tvp5150_comp0_in: endpoint { - remote-endpoint = <&comp0_out>; - }; - }; - - /* Output port 2 is video output pad */ - port@2 { - reg = <2>; - - tvp5151_to_ipu1_csi0_mux: endpoint { - remote-endpoint = <&ipu1_csi0_mux_from_parallel_sensor>; - }; - }; - }; +&gpio6 { + gpio-line-names = + "ITU656_D2", "ITU656_D3", "ITU656_D4", "ITU656_D5", + "ITU656_D6", "ITU656_D7", "", "", + "", "", "", "", "", "", "", "", + "", "", "", "", "", "", "", "", + "", "", "", "", "", "", "", ""; +}; +&i2c1 { keypad@70 { compatible = "holtek,ht16k33"; pinctrl-names = "default"; @@ -490,225 +269,9 @@ MATRIX_KEY(6, 1, KEY_F1) >; }; - - /* additional i2c devices are added automatically by the boot loader */ -}; - -&i2c3 { - clock-frequency = <100000>; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_i2c3>; - status = "okay"; - - adc@49 { - compatible = "ti,ads1015"; - reg = <0x49>; - #address-cells = <1>; - #size-cells = <0>; - - channel@4 { - reg = <4>; - ti,gain = <3>; - ti,datarate = <3>; - }; - - channel@5 { - reg = <5>; - ti,gain = <3>; - ti,datarate = <3>; - }; - - channel@6 { - reg = <6>; - ti,gain = <3>; - ti,datarate = <3>; - }; - - channel@7 { - reg = <7>; - ti,gain = <3>; - ti,datarate = <3>; - }; - }; - - rtc@51 { - compatible = "nxp,pcf8563"; - reg = <0x51>; - }; - - tsens0: temperature-sensor@70 { - compatible = "ti,tmp103"; - reg = <0x70>; - #thermal-sensor-cells = <0>; - }; -}; - -&ipu1_csi0 { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_ipu1_csi0>; - status = "okay"; -}; - -&ipu1_csi0_mux_from_parallel_sensor { - remote-endpoint = <&tvp5151_to_ipu1_csi0_mux>; -}; - -&ldb { - status = "okay"; - - lvds-channel@0 { - status = "okay"; - - port@4 { - reg = <4>; - - lvds0_out: endpoint { - remote-endpoint = <&panel_in>; - }; - }; - }; -}; - -&pwm1 { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_pwm1>; - status = "okay"; -}; - -&pwm3 { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_pwm3>; - status = "okay"; -}; - -&ssi1 { - #sound-dai-cells = <0>; - fsl,mode = "ac97-slave"; - status = "okay"; -}; - -&uart1 { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_uart1>; - status = "okay"; -}; - -&uart2 { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_uart2>; - status = "okay"; -}; - -&uart3 { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_uart3>; - status = "okay"; -}; - -&uart4 { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_uart4>; - status = "okay"; -}; - -&uart5 { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_uart5>; - status = "okay"; -}; - -&usbh1 { - vbus-supply = <®_h1_vbus>; - pinctrl-names = "default"; - phy_type = "utmi"; - dr_mode = "host"; - status = "okay"; -}; - -&usbotg { - vbus-supply = <®_otg_vbus>; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_usbotg>; - phy_type = "utmi"; - dr_mode = "host"; - disable-over-current; - status = "okay"; -}; - -&usdhc1 { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_usdhc1>; - cd-gpios = <&gpio1 1 GPIO_ACTIVE_LOW>; - no-1-8-v; - disable-wp; - cap-sd-highspeed; - no-mmc; - no-sdio; - status = "okay"; -}; - -&usdhc3 { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_usdhc3>; - bus-width = <8>; - no-1-8-v; - non-removable; - no-sd; - no-sdio; - status = "okay"; }; &iomuxc { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_hog>; - - pinctrl_audmux: audmuxgrp { - fsl,pins = < - /* SGTL5000 sys_mclk */ - MX6QDL_PAD_CSI0_MCLK__CCM_CLKO1 0x030b0 - MX6QDL_PAD_CSI0_DAT7__AUD3_RXD 0x130b0 - MX6QDL_PAD_CSI0_DAT4__AUD3_TXC 0x130b0 - MX6QDL_PAD_CSI0_DAT5__AUD3_TXD 0x110b0 - MX6QDL_PAD_CSI0_DAT6__AUD3_TXFS 0x130b0 - >; - }; - - pinctrl_backlight: backlightgrp { - fsl,pins = < - MX6QDL_PAD_DISP0_DAT7__GPIO4_IO28 0x1b0b0 - >; - }; - - pinctrl_can1: can1grp { - fsl,pins = < - MX6QDL_PAD_KEY_ROW2__FLEXCAN1_RX 0x1b000 - MX6QDL_PAD_KEY_COL2__FLEXCAN1_TX 0x3008 - /* CAN1_SR */ - MX6QDL_PAD_KEY_COL3__GPIO4_IO12 0x13008 - /* CAN1_TERM */ - MX6QDL_PAD_GPIO_0__GPIO1_IO00 0x1b088 - >; - }; - - pinctrl_can2: can2grp { - fsl,pins = < - MX6QDL_PAD_KEY_ROW4__FLEXCAN2_RX 0x1b000 - MX6QDL_PAD_KEY_COL4__FLEXCAN2_TX 0x3008 - /* CAN2_SR */ - MX6QDL_PAD_KEY_ROW3__GPIO4_IO13 0x13008 - >; - }; - - pinctrl_ecspi1: ecspi1grp { - fsl,pins = < - MX6QDL_PAD_EIM_D17__ECSPI1_MISO 0x100b1 - MX6QDL_PAD_EIM_D18__ECSPI1_MOSI 0x100b1 - MX6QDL_PAD_EIM_D16__ECSPI1_SCLK 0x100b1 - /* CS */ - MX6QDL_PAD_EIM_D19__GPIO3_IO19 0x000b1 - >; - }; - pinctrl_ecspi2: ecspi2grp { fsl,pins = < MX6QDL_PAD_DISP0_DAT16__ECSPI2_MOSI 0x100b1 @@ -747,113 +310,12 @@ >; }; - pinctrl_hog: hoggrp { - fsl,pins = < - /* ITU656_nRESET */ - MX6QDL_PAD_GPIO_2__GPIO1_IO02 0x1b0b0 - /* CAM1_MIRROR */ - MX6QDL_PAD_GPIO_3__GPIO1_IO03 0x130b0 - /* CAM2_MIRROR */ - MX6QDL_PAD_GPIO_4__GPIO1_IO04 0x130b0 - /* CAM_nDETECT */ - MX6QDL_PAD_GPIO_17__GPIO7_IO12 0x1b0b0 - /* ISB_IN1 */ - MX6QDL_PAD_EIM_A16__GPIO2_IO22 0x130b0 - /* ISB_nIN2 */ - MX6QDL_PAD_EIM_A17__GPIO2_IO21 0x1b0b0 - /* WARN_LIGHT */ - MX6QDL_PAD_EIM_A19__GPIO2_IO19 0x100b0 - /* ON2_FB */ - MX6QDL_PAD_EIM_A25__GPIO5_IO02 0x100b0 - /* YACO_nIRQ */ - MX6QDL_PAD_EIM_D23__GPIO3_IO23 0x1b0b0 - /* YACO_BOOT0 */ - MX6QDL_PAD_EIM_D30__GPIO3_IO30 0x130b0 - /* YACO_nRESET */ - MX6QDL_PAD_EIM_D31__GPIO3_IO31 0x1b0b0 - /* FORCE_ON1 */ - MX6QDL_PAD_EIM_EB2__GPIO2_IO30 0x1b0b0 - /* AUDIO_nRESET */ - MX6QDL_PAD_CSI0_VSYNC__GPIO5_IO21 0x1f0b0 - /* ITU656_nPDN */ - MX6QDL_PAD_CSI0_DATA_EN__GPIO5_IO20 0x1b0b0 - - /* HW revision detect */ - /* REV_ID0 */ - MX6QDL_PAD_SD4_DAT0__GPIO2_IO08 0x1b0b0 - /* REV_ID1 is shared with PWM3 */ - /* REV_ID2 */ - MX6QDL_PAD_SD4_DAT2__GPIO2_IO10 0x1b0b0 - /* REV_ID3 */ - MX6QDL_PAD_SD4_DAT3__GPIO2_IO11 0x1b0b0 - /* REV_ID4 */ - MX6QDL_PAD_SD4_DAT4__GPIO2_IO12 0x1b0b0 - - /* New in HW revision 1 */ - /* ON1_FB */ - MX6QDL_PAD_EIM_D20__GPIO3_IO20 0x100b0 - /* DIP1_FB */ - MX6QDL_PAD_DI0_PIN2__GPIO4_IO18 0x1b0b0 - >; - }; - - pinctrl_i2c1: i2c1grp { - fsl,pins = < - MX6QDL_PAD_CSI0_DAT8__I2C1_SDA 0x4001f8b1 - MX6QDL_PAD_CSI0_DAT9__I2C1_SCL 0x4001f8b1 - >; - }; - - pinctrl_i2c3: i2c3grp { - fsl,pins = < - MX6QDL_PAD_GPIO_5__I2C3_SCL 0x4001b8b1 - MX6QDL_PAD_GPIO_6__I2C3_SDA 0x4001b8b1 - >; - }; - - pinctrl_ipu1_csi0: ipu1csi0grp { - fsl,pins = < - MX6QDL_PAD_CSI0_DAT12__IPU1_CSI0_DATA12 0x1b0b0 - MX6QDL_PAD_CSI0_DAT13__IPU1_CSI0_DATA13 0x1b0b0 - MX6QDL_PAD_CSI0_DAT14__IPU1_CSI0_DATA14 0x1b0b0 - MX6QDL_PAD_CSI0_DAT15__IPU1_CSI0_DATA15 0x1b0b0 - MX6QDL_PAD_CSI0_DAT16__IPU1_CSI0_DATA16 0x1b0b0 - MX6QDL_PAD_CSI0_DAT17__IPU1_CSI0_DATA17 0x1b0b0 - MX6QDL_PAD_CSI0_DAT18__IPU1_CSI0_DATA18 0x1b0b0 - MX6QDL_PAD_CSI0_DAT19__IPU1_CSI0_DATA19 0x1b0b0 - MX6QDL_PAD_CSI0_PIXCLK__IPU1_CSI0_PIXCLK 0x1b0b0 - >; - }; - pinctrl_keypad: keypadgrp { fsl,pins = < MX6QDL_PAD_GPIO_19__GPIO4_IO05 0x1b0b0 >; }; - pinctrl_leds: ledsgrp { - fsl,pins = < - /* DEBUG0 */ - MX6QDL_PAD_DI0_DISP_CLK__GPIO4_IO16 0x1b0b0 - /* DEBUG1 */ - MX6QDL_PAD_DI0_PIN15__GPIO4_IO17 0x1b0b0 - /* POWER_LED */ - MX6QDL_PAD_EIM_CS1__GPIO2_IO24 0x1b0b0 - >; - }; - - pinctrl_pwm1: pwm1grp { - fsl,pins = < - MX6QDL_PAD_DISP0_DAT8__PWM1_OUT 0x1b0b0 - >; - }; - - pinctrl_pwm3: pwm3grp { - fsl,pins = < - MX6QDL_PAD_SD4_DAT1__PWM3_OUT 0x1b0b0 - >; - }; - pinctrl_rotary_ch: rotarychgrp { fsl,pins = < MX6QDL_PAD_NANDF_D3__GPIO2_IO03 0x1b0b0 @@ -867,77 +329,4 @@ MX6QDL_PAD_DISP0_DAT15__GPIO5_IO09 0x1b0b0 >; }; - - /* YaCO AUX Uart */ - pinctrl_uart1: uart1grp { - fsl,pins = < - MX6QDL_PAD_CSI0_DAT10__UART1_TX_DATA 0x1b0b1 - MX6QDL_PAD_CSI0_DAT11__UART1_RX_DATA 0x1b0b1 - >; - }; - - pinctrl_uart2: uart2grp { - fsl,pins = < - MX6QDL_PAD_EIM_D26__UART2_TX_DATA 0x1b0b1 - MX6QDL_PAD_EIM_D27__UART2_RX_DATA 0x1b0b1 - >; - }; - - /* YaCO Touchscreen UART */ - pinctrl_uart3: uart3grp { - fsl,pins = < - MX6QDL_PAD_EIM_D24__UART3_TX_DATA 0x1b0b1 - MX6QDL_PAD_EIM_D25__UART3_RX_DATA 0x1b0b1 - >; - }; - - pinctrl_uart4: uart4grp { - fsl,pins = < - MX6QDL_PAD_KEY_COL0__UART4_TX_DATA 0x1b0b1 - MX6QDL_PAD_KEY_ROW0__UART4_RX_DATA 0x1b0b1 - >; - }; - - pinctrl_uart5: uart5grp { - fsl,pins = < - MX6QDL_PAD_KEY_COL1__UART5_TX_DATA 0x1b0b1 - MX6QDL_PAD_KEY_ROW1__UART5_RX_DATA 0x1b0b1 - >; - }; - - pinctrl_usbotg: usbotggrp { - fsl,pins = < - MX6QDL_PAD_EIM_D21__USB_OTG_OC 0x1b0b0 - /* power enable, high active */ - MX6QDL_PAD_EIM_D22__GPIO3_IO22 0x1b0b0 - >; - }; - - pinctrl_usdhc1: usdhc1grp { - fsl,pins = < - MX6QDL_PAD_SD1_CMD__SD1_CMD 0x170f9 - MX6QDL_PAD_SD1_CLK__SD1_CLK 0x100f9 - MX6QDL_PAD_SD1_DAT0__SD1_DATA0 0x170f9 - MX6QDL_PAD_SD1_DAT1__SD1_DATA1 0x170f9 - MX6QDL_PAD_SD1_DAT2__SD1_DATA2 0x170f9 - MX6QDL_PAD_SD1_DAT3__SD1_DATA3 0x170f9 - MX6QDL_PAD_GPIO_1__GPIO1_IO01 0x1b0b0 - >; - }; - - pinctrl_usdhc3: usdhc3grp { - fsl,pins = < - MX6QDL_PAD_SD3_CMD__SD3_CMD 0x17099 - MX6QDL_PAD_SD3_CLK__SD3_CLK 0x10099 - MX6QDL_PAD_SD3_DAT0__SD3_DATA0 0x17099 - MX6QDL_PAD_SD3_DAT1__SD3_DATA1 0x17099 - MX6QDL_PAD_SD3_DAT2__SD3_DATA2 0x17099 - MX6QDL_PAD_SD3_DAT3__SD3_DATA3 0x17099 - MX6QDL_PAD_SD3_DAT4__SD3_DATA4 0x17099 - MX6QDL_PAD_SD3_DAT5__SD3_DATA5 0x17099 - MX6QDL_PAD_SD3_DAT6__SD3_DATA6 0x17099 - MX6QDL_PAD_SD3_DAT7__SD3_DATA7 0x17099 - MX6QDL_PAD_SD3_RST__SD3_RESET 0x1b0b1 - >; - }; }; diff --git a/arch/arm/boot/dts/imx6dl-vicut1.dts b/arch/arm/boot/dts/imx6dl-vicut1.dts index 174fd913bf96..5035d303447d 100644 --- a/arch/arm/boot/dts/imx6dl-vicut1.dts +++ b/arch/arm/boot/dts/imx6dl-vicut1.dts @@ -6,6 +6,7 @@ /dts-v1/; #include "imx6dl.dtsi" #include "imx6qdl-vicut1.dtsi" +#include "imx6qdl-vicut1-12inch.dtsi" / { model = "Kverneland UT1 Board"; diff --git a/arch/arm/boot/dts/imx6q-ba16.dtsi b/arch/arm/boot/dts/imx6q-ba16.dtsi index 6330d75f8f39..f266f1b7e0cf 100644 --- a/arch/arm/boot/dts/imx6q-ba16.dtsi +++ b/arch/arm/boot/dts/imx6q-ba16.dtsi @@ -142,7 +142,7 @@ pinctrl-0 = <&pinctrl_ecspi1>; status = "okay"; - flash: n25q032@0 { + flash: flash@0 { compatible = "jedec,spi-nor"; #address-cells = <1>; #size-cells = <1>; diff --git a/arch/arm/boot/dts/imx6q-bosch-acc.dts b/arch/arm/boot/dts/imx6q-bosch-acc.dts new file mode 100644 index 000000000000..8768222e183e --- /dev/null +++ b/arch/arm/boot/dts/imx6q-bosch-acc.dts @@ -0,0 +1,779 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Support for the i.MX6-based Bosch ACC board. + * + * Copyright (C) 2016 Garz & Fricke GmbH + * Copyright (C) 2018 DENX Software Engineering GmbH, Heiko Schocher <hs@denx.de> + * Copyright (C) 2018 DENX Software Engineering GmbH, Niel Fourie <lusus@denx.de> + * Copyright (C) 2019-2021 Bosch Thermotechnik GmbH, Matthias Winker <matthias.winker@bosch.com> + * Copyright (C) 2022 DENX Software Engineering GmbH, Philip Oberfichtner <pro@denx.de> + */ + +/dts-v1/; + +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/leds/common.h> +#include "imx6q.dtsi" + +/ { + model = "Bosch ACC"; + compatible = "bosch,imx6q-acc", "fsl,imx6q"; + + aliases { + i2c0 = &i2c1; + i2c1 = &i2c2; + i2c2 = &i2c3; + mmc0 = &usdhc4; + mmc1 = &usdhc2; + serial0 = &uart2; + serial1 = &uart1; + }; + + memory@10000000 { + device_type = "memory"; + reg = <0x10000000 0x40000000>; + }; + + backlight_lvds: backlight-lvds { + compatible = "pwm-backlight"; + pwms = <&pwm1 0 200000>; + brightness-levels = <0 61 499 1706 4079 8022 13938 22237 33328 47623 65535>; + num-interpolated-steps = <10>; + default-brightness-level = <60>; + power-supply = <®_lcd>; + }; + + panel { + compatible = "dataimage,fg1001l0dsswmg01"; + backlight = <&backlight_lvds>; + + port { + panel_in: endpoint { + remote-endpoint = <&lvds0_out>; + }; + }; + }; + + refclk: refclk { + compatible = "fixed-factor-clock"; + #clock-cells = <0>; + clocks = <&clks IMX6QDL_CLK_CKO2>; + clock-div = <1>; + clock-mult = <1>; + clock-output-names = "12mhz_refclk"; + assigned-clocks = <&clks IMX6QDL_CLK_CKO>, + <&clks IMX6QDL_CLK_CKO2>, + <&clks IMX6QDL_CLK_CKO2_SEL>; + assigned-clock-parents = <&clks IMX6QDL_CLK_CKO2>, + <&clks IMX6QDL_CLK_CKO2_PODF>, + <&clks IMX6QDL_CLK_OSC>; + assigned-clock-rates = <0>, <12000000>, <0>; + }; + + cpus { + cpu0: cpu@0 { + operating-points = < + /* kHz uV */ + 1200000 1275000 + 996000 1225000 + 852000 1225000 + 792000 1150000 + 396000 950000 + >; + fsl,soc-operating-points = < + /* ARM kHz SOC-PU uV */ + 1200000 1225000 + 996000 1175000 + 852000 1175000 + 792000 1150000 + 396000 1150000 + >; + }; + + cpu1: cpu@1 { + operating-points = < + /* kHz uV */ + 1200000 1275000 + 996000 1225000 + 852000 1225000 + 792000 1150000 + 396000 950000 + >; + fsl,soc-operating-points = < + /* ARM kHz SOC-PU uV */ + 1200000 1225000 + 996000 1175000 + 852000 1175000 + 792000 1150000 + 396000 1150000 + >; + }; + }; + + pwm-leds { + compatible = "pwm-leds"; + + led_red: led-0 { + color = <LED_COLOR_ID_RED>; + max-brightness = <248>; + default-state = "off"; + pwms = <&pwm2 0 500000>; + }; + + led_white: led-1 { + color = <LED_COLOR_ID_WHITE>; + max-brightness = <248>; + default-state = "off"; + pwms = <&pwm3 0 500000>; + linux,default-trigger = "heartbeat"; + }; + }; + + gpio-leds { + compatible = "gpio-leds"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_reset_gpio_led>; + + led-2 { + color = <LED_COLOR_ID_RED>; + gpios = <&gpio5 18 GPIO_ACTIVE_HIGH>; + default-state = "off"; + }; + }; + + reg_5p0: regulator-5p0 { + compatible = "regulator-fixed"; + regulator-name = "5p0"; + }; + + reg_vin: regulator-vin { + compatible = "regulator-fixed"; + regulator-name = "VIN"; + regulator-min-microvolt = <4500000>; + regulator-max-microvolt = <4500000>; + regulator-always-on; + vin-supply = <®_5p0>; + }; + + reg_usb_otg_vbus: regulator-usb-otg-vbus { + compatible = "regulator-fixed"; + regulator-name = "usb_otg_vbus"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + }; + + reg_usb_h1_vbus: regulator-usb-h1-vbus { + compatible = "regulator-fixed"; + regulator-name = "usb_h1_vbus"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + regulator-always-on; + vin-supply = <®_5p0>; + }; + + reg_usb_h2_vbus: regulator-usb-h2-vbus { + compatible = "regulator-fixed"; + regulator-name = "usb_h2_vbus"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + vin-supply = <®_5p0> ; + regulator-always-on; + }; + + reg_vsnvs: regulator-vsnvs { + compatible = "regulator-fixed"; + regulator-name = "VSNVS_3V0"; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + regulator-always-on; + vin-supply = <®_5p0>; + }; + + reg_lcd: regulator-lcd { + compatible = "regulator-fixed"; + regulator-name = "LCD0 POWER"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_lcd_enable>; + gpio = <&gpio3 23 GPIO_ACTIVE_HIGH>; + enable-active-high; + regulator-boot-on; + }; + + reg_dac: regulator-dac { + compatible = "regulator-fixed"; + regulator-name = "vref_dac"; + regulator-min-microvolt = <20000>; + regulator-max-microvolt = <20000>; + vin-supply = <®_5p0> ; + regulator-boot-on; + }; + + reg_sw4: regulator-sw4 { + compatible = "regulator-fixed"; + regulator-name = "SW4_3V3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + vin-supply = <®_5p0>; + }; + + reg_sys: regulator-sys { + compatible = "regulator-fixed"; + regulator-name = "SYS_4V2"; + regulator-min-microvolt = <4200000>; + regulator-max-microvolt = <4200000>; + regulator-always-on; + vin-supply = <®_5p0>; + }; +}; + +®_arm { + vin-supply = <&sw2_reg>; +}; + +®_soc { + vin-supply = <&sw1c_reg>; +}; + +®_vdd1p1 { + vin-supply = <®_vsnvs>; +}; + +®_vdd2p5 { + vin-supply = <®_vsnvs>; +}; + +®_vdd3p0 { + vin-supply = <®_vsnvs>; +}; + +&fec { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_enet>; + clocks = <&clks IMX6QDL_CLK_ENET>, + <&clks IMX6QDL_CLK_ENET>, + <&clks IMX6QDL_CLK_ENET>, + <&clks IMX6QDL_CLK_ENET_REF>; + clock-names = "ipg", "ahb", "ptp", "enet_out"; + phy-mode = "rmii"; + phy-supply = <®_sw4>; + phy-handle = <ðphy>; + status = "okay"; + + mdio { + #address-cells = <1>; + #size-cells = <0>; + + ethphy: ethernet-phy@0 { + compatible = "ethernet-phy-ieee802.3-c22"; + reg = <0>; + interrupt-parent = <&gpio1>; + interrupts = <23 IRQ_TYPE_EDGE_FALLING>; + smsc,disable-energy-detect; + }; + }; +}; + +&gpu_vg { + status = "disabled"; +}; + +&gpu_2d { + status = "disabled"; +}; + +&i2c1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c1>; + clock-frequency = <400000>; + status = "okay"; + + pmic: pmic@8 { + compatible = "fsl,pfuze100"; + reg = <0x08>; + + regulators { + sw1c_reg: sw1c { + regulator-name = "VDD_SOC (sw1abc)"; + regulator-min-microvolt = <1275000>; + regulator-max-microvolt = <1500000>; + regulator-boot-on; + regulator-always-on; + regulator-ramp-delay = <6250>; + }; + + sw2_reg: sw2 { + regulator-name = "VDD_ARM (sw2)"; + regulator-min-microvolt = <1050000>; + regulator-max-microvolt = <1500000>; + regulator-boot-on; + regulator-always-on; + regulator-ramp-delay = <6250>; + }; + + sw3a_reg: sw3a { + compatible = "regulator-fixed"; + regulator-name = "DDR_1V5a"; + regulator-boot-on; + regulator-always-on; + + }; + + sw3b_reg: sw3b { + compatible = "regulator-fixed"; + regulator-name = "DDR_1V5b"; + regulator-boot-on; + regulator-always-on; + + }; + + sw4_reg: sw4 { + regulator-name = "AUX 3V15 (sw4)"; + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <3300000>; + }; + + swbst_reg: swbst { + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5150000>; + regulator-boot-on; + regulator-always-on; + status = "disabled"; + }; + + snvs_reg: vsnvs { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <3000000>; + regulator-boot-on; + regulator-always-on; + }; + + vref_reg: vrefddr { + regulator-boot-on; + regulator-always-on; + }; + + vgen1_reg: vgen1 { + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <1550000>; + regulator-always-on; + }; + + vgen2_reg: vgen2 { + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <1550000>; + regulator-always-on; + }; + + vgen3_reg: vgen3 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + + vgen4_reg: vgen4 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + regulator-boot-on; + }; + + vgen5_reg: vgen5 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + regulator-boot-on; + }; + + vgen6_reg: vgen6 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + }; + }; + + lm75: sensor@49 { + compatible = "national,lm75b"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_lm75>; + reg = <0x49>; + }; + + eeprom: eeprom@50 { + compatible = "atmel,24c32"; + reg = <0x50>; + pagesize = <32>; + }; + + rtc: rtc@51 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_rtc>; + compatible = "nxp,pcf8563"; + reg = <0x51>; + }; +}; + +&i2c2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c2>; + clock-frequency = <100000>; + status = "okay"; + + eeprom_ext: eeprom@50 { + compatible = "atmel,24c32"; + reg = <0x50>; + pagesize = <32>; + }; +}; + +&i2c3 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c3>; + clock-frequency = <400000>; + status = "okay"; + + usb3503: usb@8 { + compatible = "smsc,usb3503"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usb3503>; + reg = <0x08>; + connect-gpios = <&gpio1 16 GPIO_ACTIVE_HIGH>; /* Old: 0, SS: HIGH */ + intn-gpios = <&gpio7 12 GPIO_ACTIVE_LOW>; /* Old: 1, SS: HIGH */ + reset-gpios = <&gpio5 5 GPIO_ACTIVE_LOW>; /* Old: 0, SS: HIGH */ + initial-mode = <1>; + clocks = <&refclk>; + clock-names = "refclk"; + refclk-frequency = <12000000>; + }; + + exc3000: touchscreen@2a { + compatible = "eeti,exc3000"; + reg = <0x2a>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_ctouch>; + interrupt-parent = <&gpio4>; + interrupts = <6 IRQ_TYPE_LEVEL_LOW>; + touchscreen-size-x = <4096>; + touchscreen-size-y = <4096>; + }; + + vcnl4035: light-sensor@60 { + compatible = "vishay,vcnl4035"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_proximity>; + reg = <0x60>; + }; +}; + +&ldb { + status = "okay"; + + lvds0: lvds-channel@0 { + fsl,data-mapping = "spwg"; + fsl,data-width = <24>; + + port@4 { + reg = <4>; + + lvds0_out: endpoint { + remote-endpoint = <&panel_in>; + }; + }; + }; +}; + +&pwm1 { + #pwm-cells = <2>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pwm1>; + status = "okay"; +}; + +&pwm2 { + #pwm-cells = <2>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pwm2>; + status = "okay"; +}; + +&pwm3 { + #pwm-cells = <2>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pwm3>; + status = "okay"; +}; + +&pwm4 { + #pwm-cells = <2>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pwm4>; + status = "okay"; +}; + +&uart1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart1>; + rts-gpios = <&gpio7 8 GPIO_ACTIVE_HIGH>; + linux,rs485-enabled-at-boot-time; + rs485-rx-during-tx; + status = "okay"; +}; + +&uart2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart2>; + uart-has-rtscts; + status = "okay"; +}; + +&usbh1 { + vbus-supply = <®_usb_h1_vbus>; + status = "okay"; +}; + +&usbh2 { + pinctrl-names = "idle", "active"; + pinctrl-0 = <&pinctrl_usbh2_idle>; + pinctrl-1 = <&pinctrl_usbh2_active>; + vbus-supply = <®_usb_h2_vbus>; + status = "okay"; +}; + +&usbotg { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usbotg>; + vbus-supply = <®_usb_otg_vbus>; + disable-over-current; + dr_mode = "otg"; + srp-disable; + hnp-disable; + adp-disable; + status = "okay"; +}; + +&usbphynop1 { + clocks = <&clks IMX6QDL_CLK_USBPHY1>; + clock-names = "main_clk"; + vcc-supply = <®_usb_h1_vbus>; +}; + +&usbphynop2 { + vcc-supply = <®_usb_h2_vbus>; +}; + +&usdhc2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usdhc2>; + cd-gpios = <&gpio1 4 GPIO_ACTIVE_LOW>; + no-1-8-v; + keep-power-in-suspend; + enable-sdio-wakeup; + voltage-ranges = <3300 3300>; + vmmc-supply = <®_sw4>; + fsl,wp-controller; + status = "okay"; +}; + +&usdhc4 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usdhc4>; + bus-width = <8>; + non-removable; + no-1-8-v; + keep-power-in-suspend; + voltage-ranges = <3300 3300>; + vmmc-supply = <®_sw4>; + fsl,wp-controller; + status = "okay"; +}; + +&wdog1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_wdog1>; + fsl,ext-reset-output; + timeout-sec=<10>; + status = "okay"; +}; + +&iomuxc { + pinctrl_enet: enetgrp { + fsl,pins = < + MX6QDL_PAD_ENET_MDC__ENET_MDC 0x1b0b0 + MX6QDL_PAD_ENET_MDIO__ENET_MDIO 0x1b0b0 + MX6QDL_PAD_ENET_CRS_DV__ENET_RX_EN 0x1b0b0 + MX6QDL_PAD_ENET_REF_CLK__GPIO1_IO23 0x1b0b0 /* FEC INT */ + MX6QDL_PAD_ENET_RX_ER__ENET_RX_ER 0x1b0b0 + MX6QDL_PAD_ENET_TX_EN__ENET_TX_EN 0x0001b098 + MX6QDL_PAD_ENET_RXD0__ENET_RX_DATA0 0x1b0b0 + MX6QDL_PAD_ENET_RXD1__ENET_RX_DATA1 0x1b0b0 + MX6QDL_PAD_ENET_TXD1__ENET_TX_DATA1 0x0001b098 + MX6QDL_PAD_ENET_TXD0__ENET_TX_DATA0 0x0001b098 + MX6QDL_PAD_GPIO_16__ENET_REF_CLK 0x4001b0a8 + >; + }; + + pinctrl_reset_gpio_led: reset-gpio-led-grp { + fsl,pins = < + MX6QDL_PAD_CSI0_PIXCLK__GPIO5_IO18 0x1b0b0 + >; + }; + + pinctrl_i2c1: i2c1grp { + fsl,pins = < + MX6QDL_PAD_CSI0_DAT8__I2C1_SDA 0x4001b8b1 + MX6QDL_PAD_CSI0_DAT9__I2C1_SCL 0x4001b8b1 + >; + }; + + pinctrl_i2c2: i2c2grp { + fsl,pins = < + MX6QDL_PAD_KEY_COL3__I2C2_SCL 0x4001b810 + MX6QDL_PAD_KEY_ROW3__I2C2_SDA 0x4001b810 + >; + }; + + pinctrl_i2c3: i2c3grp { + fsl,pins = < + MX6QDL_PAD_GPIO_5__I2C3_SCL 0x4001b8b1 + MX6QDL_PAD_GPIO_6__I2C3_SDA 0x4001b8b1 + >; + }; + + pinctrl_lcd_enable: lcdenablegrp { + fsl,pins = < + MX6QDL_PAD_EIM_D23__GPIO3_IO23 0x1b0b0 /* lcd enable */ + MX6QDL_PAD_EIM_D16__GPIO3_IO16 0x1b0b0 /* sel6_8 */ + >; + }; + + pinctrl_lm75: lm75grp { + fsl,pins = < + MX6QDL_PAD_KEY_ROW0__GPIO4_IO07 0x1b0b0 + >; + }; + + pinctrl_proximity: proximitygrp { + fsl,pins = < + MX6QDL_PAD_KEY_ROW2__GPIO4_IO11 0x1b0b0 + >; + }; + + pinctrl_pwm1: pwm1grp { + fsl,pins = < + MX6QDL_PAD_SD1_DAT3__PWM1_OUT 0x0001b0b0 + >; + }; + + pinctrl_pwm2: pwm2grp { + fsl,pins = < + MX6QDL_PAD_SD1_DAT2__PWM2_OUT 0x0001b0b0 + >; + }; + + pinctrl_pwm3: pwm3grp { + fsl,pins = < + MX6QDL_PAD_SD1_DAT1__PWM3_OUT 0x0001b0b0 + >; + }; + + pinctrl_pwm4: pwm4grp { + fsl,pins = < + MX6QDL_PAD_SD1_CMD__PWM4_OUT 0x0001b0b0 + >; + }; + + pinctrl_rtc: rtc-grp { + fsl,pins = < + MX6QDL_PAD_KEY_COL1__GPIO4_IO08 0x1b0b0 /* RTC INT */ + >; + }; + + pinctrl_ctouch: ctouch-grp { + fsl,pins = < + MX6QDL_PAD_KEY_COL0__GPIO4_IO06 0x1b0b0 /* CTOUCH_INT */ + MX6QDL_PAD_SD1_CLK__GPIO1_IO20 0x0001b0b0 /* CTOUCH_RESET */ + >; + }; + + pinctrl_uart1: uart1grp { + fsl,pins = < + MX6QDL_PAD_SD3_DAT6__UART1_RX_DATA 0x1b0b1 + MX6QDL_PAD_SD3_DAT7__UART1_TX_DATA 0x1b0b1 + MX6QDL_PAD_SD3_RST__GPIO7_IO08 0x0001b0b0 + >; + }; + + pinctrl_uart2: uart2grp { + fsl,pins = < + MX6QDL_PAD_SD3_DAT4__UART2_RX_DATA 0x1b0b1 + MX6QDL_PAD_SD3_DAT5__UART2_TX_DATA 0x1b0b1 + MX6QDL_PAD_EIM_D28__UART2_CTS_B 0x1b0b1 + MX6QDL_PAD_EIM_D29__UART2_RTS_B 0x1b0b1 + >; + }; + + pinctrl_usbh2_idle: usbh2-idle-grp { + fsl,pins = < + MX6QDL_PAD_RGMII_TXC__USB_H2_DATA 0x00013018 + MX6QDL_PAD_RGMII_TX_CTL__USB_H2_STROBE 0x00013018 + >; + }; + + pinctrl_usbh2_active: usbh2-active-grp { + fsl,pins = < + MX6QDL_PAD_RGMII_TXC__USB_H2_DATA 0x00013018 + MX6QDL_PAD_RGMII_TX_CTL__USB_H2_STROBE 0x00017018 + >; + }; + + pinctrl_usb3503: usb3503-grp { + fsl,pins = < + MX6QDL_PAD_CSI0_MCLK__CCM_CLKO1 0x00000018 + MX6QDL_PAD_GPIO_17__GPIO7_IO12 0x1b0b0 /* USB INT */ + MX6QDL_PAD_DISP0_DAT11__GPIO5_IO05 0x0001b0b0 /* USB Reset */ + MX6QDL_PAD_SD1_DAT0__GPIO1_IO16 0x1b0b0 /* USB Connect */ + >; + }; + + pinctrl_usbotg: usbotggrp { + fsl,pins = < + MX6QDL_PAD_GPIO_1__USB_OTG_ID 0x17059 + >; + }; + + pinctrl_usdhc2: usdhc2grp { + fsl,pins = < + MX6QDL_PAD_SD2_CMD__SD2_CMD 0x00017069 + MX6QDL_PAD_SD2_CLK__SD2_CLK 0x00010038 + MX6QDL_PAD_SD2_DAT0__SD2_DATA0 0x00017069 + MX6QDL_PAD_SD2_DAT1__SD2_DATA1 0x00017069 + MX6QDL_PAD_SD2_DAT2__SD2_DATA2 0x00017069 + MX6QDL_PAD_SD2_DAT3__SD2_DATA3 0x00017069 + MX6QDL_PAD_GPIO_4__SD2_CD_B 0x0001b0b0 + >; + }; + + pinctrl_usdhc4: usdhc4grp { + fsl,pins = < + MX6QDL_PAD_SD4_CMD__SD4_CMD 0x00017059 + MX6QDL_PAD_SD4_CLK__SD4_CLK 0x00010059 + MX6QDL_PAD_SD4_DAT0__SD4_DATA0 0x00017059 + MX6QDL_PAD_SD4_DAT1__SD4_DATA1 0x00017059 + MX6QDL_PAD_SD4_DAT2__SD4_DATA2 0x00017059 + MX6QDL_PAD_SD4_DAT3__SD4_DATA3 0x00017059 + MX6QDL_PAD_SD4_DAT4__SD4_DATA4 0x00017059 + MX6QDL_PAD_SD4_DAT5__SD4_DATA5 0x00017059 + MX6QDL_PAD_SD4_DAT6__SD4_DATA6 0x00017059 + MX6QDL_PAD_SD4_DAT7__SD4_DATA7 0x00017059 + >; + }; + + pinctrl_wdog1: wdoggrp { + fsl,pins = < + MX6QDL_PAD_GPIO_9__WDOG1_B 0x1b0b0 + >; + }; +}; diff --git a/arch/arm/boot/dts/imx6q-bx50v3.dtsi b/arch/arm/boot/dts/imx6q-bx50v3.dtsi index 10922375c51e..ead83091e193 100644 --- a/arch/arm/boot/dts/imx6q-bx50v3.dtsi +++ b/arch/arm/boot/dts/imx6q-bx50v3.dtsi @@ -160,7 +160,7 @@ pinctrl-0 = <&pinctrl_ecspi5>; status = "okay"; - m25_eeprom: m25p80@0 { + m25_eeprom: flash@0 { compatible = "atmel,at25"; spi-max-frequency = <10000000>; size = <0x8000>; diff --git a/arch/arm/boot/dts/imx6q-cm-fx6.dts b/arch/arm/boot/dts/imx6q-cm-fx6.dts index bfb530f29d9d..1ad41c944b4b 100644 --- a/arch/arm/boot/dts/imx6q-cm-fx6.dts +++ b/arch/arm/boot/dts/imx6q-cm-fx6.dts @@ -260,7 +260,7 @@ pinctrl-0 = <&pinctrl_ecspi1>; status = "okay"; - m25p80@0 { + flash@0 { #address-cells = <1>; #size-cells = <1>; compatible = "st,m25p", "jedec,spi-nor"; diff --git a/arch/arm/boot/dts/imx6q-dmo-edmqmx6.dts b/arch/arm/boot/dts/imx6q-dmo-edmqmx6.dts index c713ac03b3b9..9591848cbd37 100644 --- a/arch/arm/boot/dts/imx6q-dmo-edmqmx6.dts +++ b/arch/arm/boot/dts/imx6q-dmo-edmqmx6.dts @@ -102,7 +102,7 @@ cs-gpios = <&gpio1 12 GPIO_ACTIVE_LOW>; status = "okay"; - flash: m25p80@0 { + flash: flash@0 { compatible = "m25p80", "jedec,spi-nor"; spi-max-frequency = <40000000>; reg = <0>; diff --git a/arch/arm/boot/dts/imx6q-dms-ba16.dts b/arch/arm/boot/dts/imx6q-dms-ba16.dts index 48fb47e715f6..137db38f0d27 100644 --- a/arch/arm/boot/dts/imx6q-dms-ba16.dts +++ b/arch/arm/boot/dts/imx6q-dms-ba16.dts @@ -47,7 +47,7 @@ pinctrl-0 = <&pinctrl_ecspi5>; status = "okay"; - m25_eeprom: m25p80@0 { + m25_eeprom: flash@0 { compatible = "atmel,at25256B", "atmel,at25"; spi-max-frequency = <20000000>; size = <0x8000>; diff --git a/arch/arm/boot/dts/imx6q-gw5400-a.dts b/arch/arm/boot/dts/imx6q-gw5400-a.dts index 4cde45d5c90c..e894faba571f 100644 --- a/arch/arm/boot/dts/imx6q-gw5400-a.dts +++ b/arch/arm/boot/dts/imx6q-gw5400-a.dts @@ -137,7 +137,7 @@ pinctrl-0 = <&pinctrl_ecspi1>; status = "okay"; - flash: m25p80@0 { + flash: flash@0 { compatible = "sst,w25q256", "jedec,spi-nor"; spi-max-frequency = <30000000>; reg = <0>; diff --git a/arch/arm/boot/dts/imx6q-marsboard.dts b/arch/arm/boot/dts/imx6q-marsboard.dts index 05ee28388229..cc1801002394 100644 --- a/arch/arm/boot/dts/imx6q-marsboard.dts +++ b/arch/arm/boot/dts/imx6q-marsboard.dts @@ -100,7 +100,7 @@ cs-gpios = <&gpio2 30 GPIO_ACTIVE_LOW>; status = "okay"; - m25p80@0 { + flash@0 { compatible = "microchip,sst25vf016b"; spi-max-frequency = <20000000>; reg = <0>; diff --git a/arch/arm/boot/dts/imx6q-rex-pro.dts b/arch/arm/boot/dts/imx6q-rex-pro.dts index 1767e1a3cd53..271f4b2d9b9f 100644 --- a/arch/arm/boot/dts/imx6q-rex-pro.dts +++ b/arch/arm/boot/dts/imx6q-rex-pro.dts @@ -19,7 +19,7 @@ }; &ecspi3 { - flash: m25p80@0 { + flash: flash@0 { compatible = "sst,sst25vf032b", "jedec,spi-nor"; spi-max-frequency = <20000000>; reg = <0>; diff --git a/arch/arm/boot/dts/imx6q-vicut1.dts b/arch/arm/boot/dts/imx6q-vicut1.dts index 0a4e251be162..dd91aff3f9e2 100644 --- a/arch/arm/boot/dts/imx6q-vicut1.dts +++ b/arch/arm/boot/dts/imx6q-vicut1.dts @@ -6,12 +6,9 @@ /dts-v1/; #include "imx6q.dtsi" #include "imx6qdl-vicut1.dtsi" +#include "imx6qdl-vicut1-12inch.dtsi" / { model = "Kverneland UT1Q Board"; compatible = "kvg,vicut1q", "fsl,imx6q"; }; - -&sata { - status = "okay"; -}; diff --git a/arch/arm/boot/dts/imx6qdl-aristainetos.dtsi b/arch/arm/boot/dts/imx6qdl-aristainetos.dtsi index e21f6ac864e5..baa197c90060 100644 --- a/arch/arm/boot/dts/imx6qdl-aristainetos.dtsi +++ b/arch/arm/boot/dts/imx6qdl-aristainetos.dtsi @@ -96,7 +96,7 @@ pinctrl-0 = <&pinctrl_ecspi4>; status = "okay"; - flash: m25p80@0 { + flash: flash@0 { #address-cells = <1>; #size-cells = <1>; compatible = "micron,n25q128a11", "jedec,spi-nor"; diff --git a/arch/arm/boot/dts/imx6qdl-aristainetos2.dtsi b/arch/arm/boot/dts/imx6qdl-aristainetos2.dtsi index 0b90c3f59f89..6b64b2fc3995 100644 --- a/arch/arm/boot/dts/imx6qdl-aristainetos2.dtsi +++ b/arch/arm/boot/dts/imx6qdl-aristainetos2.dtsi @@ -131,7 +131,7 @@ pinctrl-0 = <&pinctrl_ecspi4>; status = "okay"; - flash: m25p80@1 { + flash: flash@1 { #address-cells = <1>; #size-cells = <1>; compatible = "micron,n25q128a11", "jedec,spi-nor"; diff --git a/arch/arm/boot/dts/imx6qdl-colibri-v1_1-uhs.dtsi b/arch/arm/boot/dts/imx6qdl-colibri-v1_1-uhs.dtsi deleted file mode 100644 index 7672fbfc29be..000000000000 --- a/arch/arm/boot/dts/imx6qdl-colibri-v1_1-uhs.dtsi +++ /dev/null @@ -1,44 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0+ OR MIT -/* - * Copyright 2020 Toradex - */ - -&iomuxc { - pinctrl_usdhc1_100mhz: usdhc1grp100mhz { - fsl,pins = < - MX6QDL_PAD_SD1_CMD__SD1_CMD 0x170b1 - MX6QDL_PAD_SD1_CLK__SD1_CLK 0x100b1 - MX6QDL_PAD_SD1_DAT0__SD1_DATA0 0x170b1 - MX6QDL_PAD_SD1_DAT1__SD1_DATA1 0x170b1 - MX6QDL_PAD_SD1_DAT2__SD1_DATA2 0x170b1 - MX6QDL_PAD_SD1_DAT3__SD1_DATA3 0x170b1 - >; - }; - - pinctrl_usdhc1_200mhz: usdhc1grp200mhz { - fsl,pins = < - MX6QDL_PAD_SD1_CMD__SD1_CMD 0x170f1 - MX6QDL_PAD_SD1_CLK__SD1_CLK 0x100f1 - MX6QDL_PAD_SD1_DAT0__SD1_DATA0 0x170f1 - MX6QDL_PAD_SD1_DAT1__SD1_DATA1 0x170f1 - MX6QDL_PAD_SD1_DAT2__SD1_DATA2 0x170f1 - MX6QDL_PAD_SD1_DAT3__SD1_DATA3 0x170f1 - >; - }; -}; - -/* Colibri MMC */ -&usdhc1 { - pinctrl-names = "default", "state_100mhz", "state_200mhz"; - pinctrl-0 = <&pinctrl_usdhc1 &pinctrl_mmc_cd>; - pinctrl-1 = <&pinctrl_usdhc1_100mhz &pinctrl_mmc_cd>; - pinctrl-2 = <&pinctrl_usdhc1_200mhz &pinctrl_mmc_cd>; - vmmc-supply = <®_module_3v3>; - vqmmc-supply = <&vgen3_reg>; - wakeup-source; - keep-power-in-suspend; - sd-uhs-sdr12; - sd-uhs-sdr25; - sd-uhs-sdr50; - sd-uhs-sdr104; -}; diff --git a/arch/arm/boot/dts/imx6qdl-colibri.dtsi b/arch/arm/boot/dts/imx6qdl-colibri.dtsi index 4e2a309c93fa..c383e0e4110c 100644 --- a/arch/arm/boot/dts/imx6qdl-colibri.dtsi +++ b/arch/arm/boot/dts/imx6qdl-colibri.dtsi @@ -1,6 +1,6 @@ // SPDX-License-Identifier: GPL-2.0+ OR MIT /* - * Copyright 2014-2020 Toradex + * Copyright 2014-2022 Toradex * Copyright 2012 Freescale Semiconductor, Inc. * Copyright 2011 Linaro Ltd. */ @@ -13,13 +13,79 @@ backlight: backlight { compatible = "pwm-backlight"; + brightness-levels = <0 127 191 223 239 247 251 255>; + default-brightness-level = <1>; + enable-gpios = <&gpio3 26 GPIO_ACTIVE_HIGH>; /* Colibri BL_ON */ pinctrl-names = "default"; pinctrl-0 = <&pinctrl_gpio_bl_on>; + power-supply = <®_module_3v3>; pwms = <&pwm3 0 5000000>; - enable-gpios = <&gpio3 26 GPIO_ACTIVE_HIGH>; /* Colibri BL_ON */ status = "disabled"; }; + gpio-keys { + compatible = "gpio-keys"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_gpio_keys>; + + wakeup { + debounce-interval = <10>; + gpios = <&gpio2 22 GPIO_ACTIVE_HIGH>; /* SODIMM 45 */ + label = "Wake-Up"; + linux,code = <KEY_WAKEUP>; + wakeup-source; + }; + }; + + lcd_display: disp0 { + compatible = "fsl,imx-parallel-display"; + interface-pix-fmt = "bgr666"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_ipu1_lcdif>; + status = "disabled"; + + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + lcd_display_in: endpoint { + remote-endpoint = <&ipu1_di0_disp0>; + }; + }; + + port@1 { + reg = <1>; + + lcd_display_out: endpoint { + remote-endpoint = <&lcd_panel_in>; + }; + }; + }; + + /* Will be filled by the bootloader */ + memory@10000000 { + device_type = "memory"; + reg = <0x10000000 0>; + }; + + panel_dpi: panel-dpi { + /* + * edt,et057090dhu: EDT 5.7" LCD TFT + * edt,et070080dh6: EDT 7.0" LCD TFT + */ + compatible = "edt,et057090dhu"; + backlight = <&backlight>; + status = "disabled"; + + port { + lcd_panel_in: endpoint { + remote-endpoint = <&lcd_display_out>; + }; + }; + }; + reg_module_3v3: regulator-module-3v3 { compatible = "regulator-fixed"; regulator-name = "+V3.3"; @@ -38,36 +104,36 @@ reg_usb_host_vbus: regulator-usb-host-vbus { compatible = "regulator-fixed"; + gpio = <&gpio3 31 GPIO_ACTIVE_HIGH>; /* USBH_PEN */ pinctrl-names = "default"; pinctrl-0 = <&pinctrl_regulator_usbh_pwr>; - regulator-name = "usb_host_vbus"; - regulator-min-microvolt = <5000000>; regulator-max-microvolt = <5000000>; - gpio = <&gpio3 31 GPIO_ACTIVE_HIGH>; /* USBH_PEN */ + regulator-min-microvolt = <5000000>; + regulator-name = "usb_host_vbus"; status = "disabled"; }; sound { compatible = "fsl,imx-audio-sgtl5000"; - model = "imx6dl-colibri-sgtl5000"; - ssi-controller = <&ssi1>; audio-codec = <&codec>; audio-routing = "Headphone Jack", "HP_OUT", "LINE_IN", "Line In Jack", "MIC_IN", "Mic Jack", "Mic Jack", "Mic Bias"; + model = "imx6dl-colibri-sgtl5000"; mux-int-port = <1>; mux-ext-port = <5>; + ssi-controller = <&ssi1>; }; /* Optional S/PDIF in on SODIMM 88 and out on SODIMM 90, 137 or 168 */ sound_spdif: sound-spdif { compatible = "fsl,imx-audio-spdif"; - model = "imx-spdif"; spdif-controller = <&spdif>; spdif-in; spdif-out; + model = "imx-spdif"; status = "disabled"; }; }; @@ -92,6 +158,10 @@ status = "disabled"; }; +&clks { + fsl,pmic-stby-poweroff; +}; + /* Colibri SSP */ &ecspi4 { cs-gpios = <&gpio5 2 GPIO_ACTIVE_LOW>; @@ -101,10 +171,10 @@ }; &fec { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_enet>; phy-mode = "rmii"; phy-handle = <ðphy>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_enet>; status = "okay"; mdio { @@ -118,6 +188,224 @@ }; }; +&gpio1 { + gpio-line-names = "", + "SODIMM_67", + "SODIMM_180", + "SODIMM_196", + "SODIMM_174", + "SODIMM_176", + "SODIMM_194", + "SODIMM_55", + "SODIMM_63", + "SODIMM_28", + "SODIMM_93", + "SODIMM_69", + "SODIMM_99", + "SODIMM_130", + "SODIMM_106", + "SODIMM_98", + "SODIMM_192", + "SODIMM_49", + "SODIMM_190", + "SODIMM_51", + "SODIMM_47", + "SODIMM_53", + "", + "SODIMM_22"; +}; + +&gpio2 { + gpio-line-names = "SODIMM_132", + "SODIMM_134", + "SODIMM_135", + "SODIMM_133", + "SODIMM_102", + "SODIMM_43", + "SODIMM_127", + "SODIMM_37", + "SODIMM_104", + "SODIMM_59", + "SODIMM_30", + "SODIMM_100", + "SODIMM_38", + "SODIMM_34", + "SODIMM_32", + "SODIMM_36", + "SODIMM_59", + "SODIMM_67", + "SODIMM_97", + "SODIMM_79", + "SODIMM_103", + "SODIMM_101", + "SODIMM_45", + "SODIMM_105", + "SODIMM_107", + "SODIMM_91", + "SODIMM_89", + "SODIMM_150", + "SODIMM_126", + "SODIMM_128", + "", + "SODIMM_94"; +}; + +&gpio3 { + gpio-line-names = "SODIMM_111", + "SODIMM_113", + "SODIMM_115", + "SODIMM_117", + "SODIMM_119", + "SODIMM_121", + "SODIMM_123", + "SODIMM_125", + "SODIMM_110", + "SODIMM_112", + "SODIMM_114", + "SODIMM_116", + "SODIMM_118", + "SODIMM_120", + "SODIMM_122", + "SODIMM_124", + "", + "SODIMM_96", + "SODIMM_77", + "SODIMM_25", + "SODIMM_27", + "SODIMM_88", + "SODIMM_90", + "SODIMM_31", + "SODIMM_23", + "SODIMM_29", + "SODIMM_71", + "SODIMM_73", + "SODIMM_92", + "SODIMM_81", + "SODIMM_131", + "SODIMM_129"; +}; + +&gpio4 { + gpio-line-names = "", + "", + "", + "", + "", + "SODIMM_168", + "", + "", + "", + "", + "SODIMM_184", + "SODIMM_186", + "HDMI_15", + "HDMI_16", + "SODIMM_178", + "SODIMM_188", + "SODIMM_56", + "SODIMM_44", + "SODIMM_68", + "SODIMM_82", + "SODIMM_24", + "SODIMM_76", + "SODIMM_70", + "SODIMM_60", + "SODIMM_58", + "SODIMM_78", + "SODIMM_72", + "SODIMM_80", + "SODIMM_46", + "SODIMM_62", + "SODIMM_48", + "SODIMM_74"; +}; + +&gpio5 { + gpio-line-names = "SODIMM_95", + "", + "SODIMM_86", + "", + "SODIMM_65", + "SODIMM_50", + "SODIMM_52", + "SODIMM_54", + "SODIMM_66", + "SODIMM_64", + "SODIMM_57", + "SODIMM_61", + "SODIMM_136", + "SODIMM_138", + "SODIMM_140", + "SODIMM_142", + "SODIMM_144", + "SODIMM_146", + "SODIMM_172", + "SODIMM_170", + "SODIMM_149", + "SODIMM_151", + "SODIMM_153", + "SODIMM_155", + "SODIMM_157", + "SODIMM_159", + "SODIMM_161", + "SODIMM_163", + "SODIMM_33", + "SODIMM_35", + "SODIMM_165", + "SODIMM_167"; +}; + +&gpio6 { + gpio-line-names = "SODIMM_169", + "SODIMM_171", + "SODIMM_173", + "SODIMM_175", + "SODIMM_177", + "SODIMM_179", + "SODIMM_85", + "SODIMM_166", + "SODIMM_160", + "SODIMM_162", + "SODIMM_158", + "SODIMM_164", + "", + "", + "SODIMM_156", + "SODIMM_75", + "SODIMM_154", + "", + "", + "", + "", + "", + "", + "", + "", + "", + "", + "", + "", + "", + "", + "SODIMM_152"; +}; + +&gpio7 { + gpio-line-names = "", + "", + "", + "", + "", + "", + "", + "", + "", + "SODIMM_19", + "SODIMM_21", + "", + "SODIMM_137"; +}; + &hdmi { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_hdmi_ddc>; @@ -132,65 +420,66 @@ clock-frequency = <100000>; pinctrl-names = "default", "gpio"; pinctrl-0 = <&pinctrl_i2c2>; - pinctrl-0 = <&pinctrl_i2c2_gpio>; + pinctrl-1 = <&pinctrl_i2c2_gpio>; scl-gpios = <&gpio2 30 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; sda-gpios = <&gpio3 16 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; status = "okay"; - pmic: pfuze100@8 { + pmic: pmic@8 { compatible = "fsl,pfuze100"; + fsl,pmic-stby-poweroff; reg = <0x08>; regulators { sw1a_reg: sw1ab { - regulator-min-microvolt = <300000>; - regulator-max-microvolt = <1875000>; - regulator-boot-on; regulator-always-on; + regulator-boot-on; + regulator-max-microvolt = <1875000>; + regulator-min-microvolt = <300000>; regulator-ramp-delay = <6250>; }; sw1c_reg: sw1c { - regulator-min-microvolt = <300000>; - regulator-max-microvolt = <1875000>; - regulator-boot-on; regulator-always-on; + regulator-boot-on; + regulator-max-microvolt = <1875000>; + regulator-min-microvolt = <300000>; regulator-ramp-delay = <6250>; }; sw3a_reg: sw3a { - regulator-min-microvolt = <400000>; - regulator-max-microvolt = <1975000>; - regulator-boot-on; regulator-always-on; + regulator-boot-on; + regulator-max-microvolt = <1975000>; + regulator-min-microvolt = <400000>; }; swbst_reg: swbst { - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5150000>; - regulator-boot-on; regulator-always-on; + regulator-boot-on; + regulator-max-microvolt = <5150000>; + regulator-min-microvolt = <5000000>; }; snvs_reg: vsnvs { - regulator-min-microvolt = <1000000>; - regulator-max-microvolt = <3000000>; - regulator-boot-on; regulator-always-on; + regulator-boot-on; + regulator-max-microvolt = <3000000>; + regulator-min-microvolt = <1000000>; }; vref_reg: vrefddr { - regulator-boot-on; regulator-always-on; + regulator-boot-on; }; /* vgen1: unused */ vgen2_reg: vgen2 { - regulator-min-microvolt = <800000>; - regulator-max-microvolt = <1550000>; - regulator-boot-on; regulator-always-on; + regulator-boot-on; + regulator-max-microvolt = <1550000>; + regulator-min-microvolt = <800000>; }; /* @@ -198,57 +487,58 @@ * the i.MX 6 NVCC_SD1. */ vgen3_reg: vgen3 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <3300000>; - regulator-boot-on; regulator-always-on; + regulator-boot-on; + regulator-max-microvolt = <3300000>; + regulator-min-microvolt = <1800000>; }; vgen4_reg: vgen4 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - regulator-boot-on; regulator-always-on; + regulator-boot-on; + regulator-max-microvolt = <1800000>; + regulator-min-microvolt = <1800000>; }; vgen5_reg: vgen5 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <3300000>; - regulator-boot-on; regulator-always-on; + regulator-boot-on; + regulator-max-microvolt = <3300000>; + regulator-min-microvolt = <1800000>; }; vgen6_reg: vgen6 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <3300000>; - regulator-boot-on; regulator-always-on; + regulator-boot-on; + regulator-max-microvolt = <3300000>; + regulator-min-microvolt = <1800000>; }; }; }; codec: sgtl5000@a { compatible = "fsl,sgtl5000"; - reg = <0x0a>; clocks = <&clks IMX6QDL_CLK_CKO>; + lrclk-strength = <3>; + reg = <0x0a>; + #sound-dai-cells = <0>; VDDA-supply = <®_module_3v3_audio>; VDDIO-supply = <®_module_3v3>; VDDD-supply = <&vgen4_reg>; - lrclk-strength = <3>; }; /* STMPE811 touch screen controller */ stmpe811@41 { compatible = "st,stmpe811"; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_touch_int>; - reg = <0x41>; + blocks = <0x5>; interrupts = <20 IRQ_TYPE_LEVEL_LOW>; interrupt-parent = <&gpio6>; interrupt-controller; id = <0>; - blocks = <0x5>; irq-trigger = <0x1>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_touch_int>; + reg = <0x41>; /* 3.25 MHz ADC clock speed */ st,adc-freq = <1>; /* 12-bit ADC */ @@ -258,7 +548,7 @@ /* ADC converstion time: 80 clocks */ st,sample-time = <4>; - stmpe_touchscreen { + stmpe_ts: stmpe_touchscreen { compatible = "st,stmpe-ts"; /* 8 sample average control */ st,ave-ctrl = <3>; @@ -273,9 +563,10 @@ st,settling = <3>; /* 5 ms touch detect interrupt delay */ st,touch-det-delay = <5>; + status = "disabled"; }; - stmpe_adc { + stmpe_adc: stmpe_adc { compatible = "st,stmpe-adc"; /* forbid to use ADC channels 3-0 (touch) */ st,norequest-mask = <0x0F>; @@ -294,6 +585,21 @@ scl-gpios = <&gpio1 3 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; sda-gpios = <&gpio1 6 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; status = "disabled"; + + atmel_mxt_ts: touchscreen@4a { + compatible = "atmel,maxtouch"; + interrupt-parent = <&gpio2>; + interrupts = <24 IRQ_TYPE_EDGE_FALLING>; /* SODIMM 107 */ + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_atmel_conn>; + reg = <0x4a>; + reset-gpios = <&gpio1 14 GPIO_ACTIVE_HIGH>; /* SODIMM 106 */ + status = "disabled"; + }; +}; + +&ipu1_di0_disp0 { + remote-endpoint = <&lcd_display_in>; }; /* Colibri PWM<B> */ @@ -338,27 +644,27 @@ /* Colibri UART_A */ &uart1 { + fsl,dte-mode; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_uart1_dte &pinctrl_uart1_ctrl>; - fsl,dte-mode; uart-has-rtscts; status = "disabled"; }; /* Colibri UART_B */ &uart2 { + fsl,dte-mode; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_uart2_dte>; - fsl,dte-mode; uart-has-rtscts; status = "disabled"; }; /* Colibri UART_C */ &uart3 { + fsl,dte-mode; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_uart3_dte>; - fsl,dte-mode; status = "disabled"; }; @@ -370,24 +676,28 @@ /* Colibri MMC */ &usdhc1 { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_usdhc1 &pinctrl_mmc_cd>; cd-gpios = <&gpio2 5 GPIO_ACTIVE_LOW>; /* MMCD */ - disable-wp; - vqmmc-supply = <®_module_3v3>; bus-width = <4>; no-1-8-v; + disable-wp; + pinctrl-names = "default", "state_100mhz", "state_200mhz", "sleep"; + pinctrl-0 = <&pinctrl_usdhc1 &pinctrl_mmc_cd>; + pinctrl-1 = <&pinctrl_usdhc1_100mhz &pinctrl_mmc_cd>; + pinctrl-2 = <&pinctrl_usdhc1_200mhz &pinctrl_mmc_cd>; + pinctrl-3 = <&pinctrl_usdhc1_sleep &pinctrl_mmc_cd_sleep>; + vmmc-supply = <®_module_3v3>; + vqmmc-supply = <&vgen3_reg>; status = "disabled"; }; /* eMMC */ &usdhc3 { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_usdhc3>; - vqmmc-supply = <®_module_3v3>; bus-width = <8>; no-1-8-v; non-removable; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usdhc3>; + vqmmc-supply = <®_module_3v3>; status = "okay"; }; @@ -405,14 +715,36 @@ pinctrl-names = "default"; pinctrl-0 = <&pinctrl_usbh_oc_1>; + /* Atmel MXT touchsceen + Capacitive Touch Adapter */ + /* NOTE: This pin group conflicts with pin groups + * pinctrl_pwm1/pinctrl_pwm4. Don't use them simultaneously. + */ + pinctrl_atmel_adap: atmeladaptergrp { + fsl,pins = < + MX6QDL_PAD_GPIO_9__GPIO1_IO09 0xb0b1 /* SODIMM 28 */ + MX6QDL_PAD_SD4_DAT2__GPIO2_IO10 0xb0b1 /* SODIMM 30 */ + >; + }; + + /* Atmel MXT touchsceen + boards with built-in Capacitive Touch Connector */ + /* NOTE: This pin group conflicts with pin groups pinctrl_weim_cs1 and + * pinctrl_weim_cs2. Don't use them simultaneously. + */ + pinctrl_atmel_conn: atmelconnectorgrp { + fsl,pins = < + MX6QDL_PAD_EIM_CS1__GPIO2_IO24 0xb0b1 /* SODIMM_107 */ + MX6QDL_PAD_SD2_DAT1__GPIO1_IO14 0xb0b1 /* SODIMM_106 */ + >; + }; + pinctrl_audmux: audmuxgrp { fsl,pins = < + /* SGTL5000 sys_mclk */ + MX6QDL_PAD_GPIO_0__CCM_CLKO1 0x000b0 MX6QDL_PAD_KEY_COL0__AUD5_TXC 0x130b0 MX6QDL_PAD_KEY_ROW0__AUD5_TXD 0x130b0 MX6QDL_PAD_KEY_COL1__AUD5_TXFS 0x130b0 MX6QDL_PAD_KEY_ROW1__AUD5_RXD 0x130b0 - /* SGTL5000 sys_mclk */ - MX6QDL_PAD_GPIO_0__CCM_CLKO1 0x000b0 >; }; @@ -423,28 +755,52 @@ >; }; + /* CSI pins used as GPIOs */ + pinctrl_csi_gpio_1: csigpio1grp { + fsl,pins = < + MX6QDL_PAD_EIM_D18__GPIO3_IO18 0x1b0b0 + MX6QDL_PAD_EIM_A19__GPIO2_IO19 0x1b0b0 + MX6QDL_PAD_EIM_D29__GPIO3_IO29 0x130b0 + MX6QDL_PAD_EIM_A23__GPIO6_IO06 0x1b0b0 + MX6QDL_PAD_EIM_A20__GPIO2_IO18 0x1b0b0 + MX6QDL_PAD_EIM_A17__GPIO2_IO21 0x1b0b0 + MX6QDL_PAD_EIM_A18__GPIO2_IO20 0x1b0b0 + MX6QDL_PAD_EIM_EB3__GPIO2_IO31 0x1b0b0 + MX6QDL_PAD_EIM_D17__GPIO3_IO17 0x1b0b0 + MX6QDL_PAD_NANDF_CS2__GPIO6_IO15 0x1b0b0 + MX6QDL_PAD_SD2_CMD__GPIO1_IO11 0x1b0b0 + MX6QDL_PAD_SD2_DAT0__GPIO1_IO15 0x1b0b0 + >; + }; + + pinctrl_csi_gpio_2: csigpio2grp { + fsl,pins = < + MX6QDL_PAD_EIM_A24__GPIO5_IO04 0x1b0b0 + >; + }; + pinctrl_ecspi4: ecspi4grp { fsl,pins = < + /* SPI CS */ + MX6QDL_PAD_EIM_A25__GPIO5_IO02 0x000b1 MX6QDL_PAD_EIM_D22__ECSPI4_MISO 0x100b1 MX6QDL_PAD_EIM_D28__ECSPI4_MOSI 0x100b1 MX6QDL_PAD_EIM_D21__ECSPI4_SCLK 0x100b1 - /* SPI CS */ - MX6QDL_PAD_EIM_A25__GPIO5_IO02 0x000b1 >; }; pinctrl_enet: enetgrp { fsl,pins = < + MX6QDL_PAD_ENET_CRS_DV__ENET_RX_EN 0x1b0b0 MX6QDL_PAD_ENET_MDC__ENET_MDC 0x1b0b0 MX6QDL_PAD_ENET_MDIO__ENET_MDIO 0x1b0b0 + MX6QDL_PAD_ENET_RX_ER__ENET_RX_ER 0x1b0b0 MX6QDL_PAD_ENET_RXD0__ENET_RX_DATA0 0x1b0b0 MX6QDL_PAD_ENET_RXD1__ENET_RX_DATA1 0x1b0b0 - MX6QDL_PAD_ENET_RX_ER__ENET_RX_ER 0x1b0b0 MX6QDL_PAD_ENET_TX_EN__ENET_TX_EN 0x1b0b0 MX6QDL_PAD_ENET_TXD0__ENET_TX_DATA0 0x1b0b0 MX6QDL_PAD_ENET_TXD1__ENET_TX_DATA1 0x1b0b0 - MX6QDL_PAD_ENET_CRS_DV__ENET_RX_EN 0x1b0b0 - MX6QDL_PAD_GPIO_16__ENET_REF_CLK ((1<<30) | 0x1b0b0) + MX6QDL_PAD_GPIO_16__ENET_REF_CLK ((1<<30) | 0x1b0b0) >; }; @@ -462,13 +818,32 @@ >; }; - pinctrl_gpio_bl_on: gpioblon { + pinctrl_gpio_1: gpio1grp { + fsl,pins = < + MX6QDL_PAD_DI0_PIN4__GPIO4_IO20 0x1b0b0 + MX6QDL_PAD_EIM_D27__GPIO3_IO27 0x1b0b0 + MX6QDL_PAD_ENET_REF_CLK__GPIO1_IO23 0x1b0b0 + MX6QDL_PAD_NANDF_D3__GPIO2_IO03 0x1b0b0 + MX6QDL_PAD_NANDF_D4__GPIO2_IO04 0x1b0b0 + MX6QDL_PAD_NANDF_D6__GPIO2_IO06 0x1b0b0 + MX6QDL_PAD_SD4_DAT0__GPIO2_IO08 0x1b0b0 + MX6QDL_PAD_SD4_DAT3__GPIO2_IO11 0x1b0b0 + >; + }; + pinctrl_gpio_2: gpio2grp { + fsl,pins = < + MX6QDL_PAD_GPIO_7__GPIO1_IO07 0x1b0b0 + MX6QDL_PAD_GPIO_8__GPIO1_IO08 0x1b0b0 + >; + }; + + pinctrl_gpio_bl_on: gpioblongrp { fsl,pins = < MX6QDL_PAD_EIM_D26__GPIO3_IO26 0x1b0b0 >; }; - pinctrl_gpio_keys: gpiokeys { + pinctrl_gpio_keys: gpiokeysgrp { fsl,pins = < MX6QDL_PAD_EIM_A16__GPIO2_IO22 0x130b0 >; @@ -483,15 +858,15 @@ pinctrl_i2c2: i2c2grp { fsl,pins = < - MX6QDL_PAD_EIM_EB2__I2C2_SCL 0x4001b8b1 MX6QDL_PAD_EIM_D16__I2C2_SDA 0x4001b8b1 + MX6QDL_PAD_EIM_EB2__I2C2_SCL 0x4001b8b1 >; }; - pinctrl_i2c2_gpio: i2c2grp { + pinctrl_i2c2_gpio: i2c2gpiogrp { fsl,pins = < - MX6QDL_PAD_EIM_EB2__GPIO2_IO30 0x4001b8b1 MX6QDL_PAD_EIM_D16__GPIO3_IO16 0x4001b8b1 + MX6QDL_PAD_EIM_EB2__GPIO2_IO30 0x4001b8b1 >; }; @@ -523,8 +898,8 @@ MX6QDL_PAD_EIM_EB3__IPU1_CSI1_HSYNC 0xb0b1 MX6QDL_PAD_EIM_D29__IPU1_CSI1_VSYNC 0xb0b1 /* Disable PWM pins on camera interface */ - MX6QDL_PAD_SD4_DAT1__GPIO2_IO09 0x40 MX6QDL_PAD_GPIO_1__GPIO1_IO01 0x40 + MX6QDL_PAD_SD4_DAT1__GPIO2_IO09 0x40 >; }; @@ -555,19 +930,34 @@ >; }; - pinctrl_mic_gnd: gpiomicgnd { + pinctrl_lvds_transceiver: lvdstxgrp { + fsl,pins = < + MX6QDL_PAD_EIM_WAIT__GPIO5_IO00 0x03030 /* SODIMM 95 */ + MX6QDL_PAD_GPIO_7__GPIO1_IO07 0x0b030 /* SODIMM 55 */ + MX6QDL_PAD_GPIO_8__GPIO1_IO08 0x03030 /* SODIMM 63 */ + MX6QDL_PAD_SD2_DAT3__GPIO1_IO12 0x03030 /* SODIMM 99 */ + >; + }; + + pinctrl_mic_gnd: micgndgrp { fsl,pins = < /* Controls Mic GND, PU or '1' pull Mic GND to GND */ MX6QDL_PAD_RGMII_TD1__GPIO6_IO21 0x1b0b0 >; }; - pinctrl_mmc_cd: gpiommccd { + pinctrl_mmc_cd: mmccdgrp { fsl,pins = < MX6QDL_PAD_NANDF_D5__GPIO2_IO05 0x1b0b1 >; }; + pinctrl_mmc_cd_sleep: mmccdslpgrp { + fsl,pins = < + MX6QDL_PAD_NANDF_D5__GPIO2_IO05 0x0 + >; + }; + pinctrl_pwm1: pwm1grp { fsl,pins = < MX6QDL_PAD_GPIO_9__PWM1_OUT 0x1b0b1 @@ -576,15 +966,15 @@ pinctrl_pwm2: pwm2grp { fsl,pins = < - MX6QDL_PAD_GPIO_1__PWM2_OUT 0x1b0b1 MX6QDL_PAD_EIM_A21__GPIO2_IO17 0x00040 + MX6QDL_PAD_GPIO_1__PWM2_OUT 0x1b0b1 >; }; pinctrl_pwm3: pwm3grp { fsl,pins = < - MX6QDL_PAD_SD4_DAT1__PWM3_OUT 0x1b0b1 MX6QDL_PAD_EIM_A22__GPIO2_IO16 0x00040 + MX6QDL_PAD_SD4_DAT1__PWM3_OUT 0x1b0b1 >; }; @@ -601,13 +991,6 @@ >; }; - pinctrl_usbh_oc_1: usbhoc1grp { - fsl,pins = < - /* USBH_OC */ - MX6QDL_PAD_EIM_D30__GPIO3_IO30 0x1b0b0 - >; - }; - pinctrl_spdif: spdifgrp { fsl,pins = < MX6QDL_PAD_GPIO_17__SPDIF_OUT 0x1b0b0 @@ -650,9 +1033,9 @@ pinctrl_uart2_dte: uart2dtegrp { fsl,pins = < MX6QDL_PAD_SD4_DAT4__UART2_TX_DATA 0x1b0b1 - MX6QDL_PAD_SD4_DAT7__UART2_RX_DATA 0x1b0b1 - MX6QDL_PAD_SD4_DAT6__UART2_RTS_B 0x1b0b1 MX6QDL_PAD_SD4_DAT5__UART2_CTS_B 0x1b0b1 + MX6QDL_PAD_SD4_DAT6__UART2_RTS_B 0x1b0b1 + MX6QDL_PAD_SD4_DAT7__UART2_RX_DATA 0x1b0b1 >; }; @@ -667,20 +1050,27 @@ fsl,pins = < /* USBC_DET */ MX6QDL_PAD_GPIO_17__GPIO7_IO12 0x1b0b0 - /* USBC_DET_EN */ - MX6QDL_PAD_RGMII_TX_CTL__GPIO6_IO26 0x0f058 /* USBC_DET_OVERWRITE */ MX6QDL_PAD_RGMII_RXC__GPIO6_IO30 0x0f058 + /* USBC_DET_EN */ + MX6QDL_PAD_RGMII_TX_CTL__GPIO6_IO26 0x0f058 >; }; - pinctrl_usbc_id_1: usbc_id-1 { + pinctrl_usbc_id_1: usbcid1grp { fsl,pins = < /* USBC_ID */ MX6QDL_PAD_NANDF_D2__GPIO2_IO02 0x1b0b0 >; }; + pinctrl_usbh_oc_1: usbhoc1grp { + fsl,pins = < + /* USBH_OC */ + MX6QDL_PAD_EIM_D30__GPIO3_IO30 0x1b0b0 + >; + }; + pinctrl_usdhc1: usdhc1grp { fsl,pins = < MX6QDL_PAD_SD1_CMD__SD1_CMD 0x17071 @@ -692,6 +1082,40 @@ >; }; + pinctrl_usdhc1_100mhz: usdhc1-100mhzgrp { + fsl,pins = < + MX6QDL_PAD_SD1_CMD__SD1_CMD 0x170b1 + MX6QDL_PAD_SD1_CLK__SD1_CLK 0x100b1 + MX6QDL_PAD_SD1_DAT0__SD1_DATA0 0x170b1 + MX6QDL_PAD_SD1_DAT1__SD1_DATA1 0x170b1 + MX6QDL_PAD_SD1_DAT2__SD1_DATA2 0x170b1 + MX6QDL_PAD_SD1_DAT3__SD1_DATA3 0x170b1 + >; + }; + + pinctrl_usdhc1_200mhz: usdhc1-200mhzgrp { + fsl,pins = < + MX6QDL_PAD_SD1_CMD__SD1_CMD 0x170f1 + MX6QDL_PAD_SD1_CLK__SD1_CLK 0x100f1 + MX6QDL_PAD_SD1_DAT0__SD1_DATA0 0x170f1 + MX6QDL_PAD_SD1_DAT1__SD1_DATA1 0x170f1 + MX6QDL_PAD_SD1_DAT2__SD1_DATA2 0x170f1 + MX6QDL_PAD_SD1_DAT3__SD1_DATA3 0x170f1 + >; + }; + + /* avoid backfeeding with removed card power */ + pinctrl_usdhc1_sleep: usdhc1sleepgrp { + fsl,pins = < + MX6QDL_PAD_SD1_CMD__SD1_CMD 0x3000 + MX6QDL_PAD_SD1_CLK__SD1_CLK 0x3000 + MX6QDL_PAD_SD1_DAT0__SD1_DATA0 0x3000 + MX6QDL_PAD_SD1_DAT1__SD1_DATA1 0x3000 + MX6QDL_PAD_SD1_DAT2__SD1_DATA2 0x3000 + MX6QDL_PAD_SD1_DAT3__SD1_DATA3 0x3000 + >; + }; + pinctrl_usdhc3: usdhc3grp { fsl,pins = < MX6QDL_PAD_SD3_CMD__SD3_CMD 0x17059 @@ -730,135 +1154,136 @@ >; }; - pinctrl_weim_sram: weimsramgrp { - fsl,pins = < - MX6QDL_PAD_EIM_OE__EIM_OE_B 0xb0b1 - MX6QDL_PAD_EIM_RW__EIM_RW 0xb0b1 - /* Data */ - MX6QDL_PAD_CSI0_DATA_EN__EIM_DATA00 0x1b0b0 - MX6QDL_PAD_CSI0_VSYNC__EIM_DATA01 0x1b0b0 - MX6QDL_PAD_CSI0_DAT4__EIM_DATA02 0x1b0b0 - MX6QDL_PAD_CSI0_DAT5__EIM_DATA03 0x1b0b0 - MX6QDL_PAD_CSI0_DAT6__EIM_DATA04 0x1b0b0 - MX6QDL_PAD_CSI0_DAT7__EIM_DATA05 0x1b0b0 - MX6QDL_PAD_CSI0_DAT8__EIM_DATA06 0x1b0b0 - MX6QDL_PAD_CSI0_DAT9__EIM_DATA07 0x1b0b0 - MX6QDL_PAD_CSI0_DAT12__EIM_DATA08 0x1b0b0 - MX6QDL_PAD_CSI0_DAT13__EIM_DATA09 0x1b0b0 - MX6QDL_PAD_CSI0_DAT14__EIM_DATA10 0x1b0b0 - MX6QDL_PAD_CSI0_DAT15__EIM_DATA11 0x1b0b0 - MX6QDL_PAD_CSI0_DAT16__EIM_DATA12 0x1b0b0 - MX6QDL_PAD_CSI0_DAT17__EIM_DATA13 0x1b0b0 - MX6QDL_PAD_CSI0_DAT18__EIM_DATA14 0x1b0b0 - MX6QDL_PAD_CSI0_DAT19__EIM_DATA15 0x1b0b0 - /* Address */ - MX6QDL_PAD_EIM_DA15__EIM_AD15 0xb0b1 - MX6QDL_PAD_EIM_DA14__EIM_AD14 0xb0b1 - MX6QDL_PAD_EIM_DA13__EIM_AD13 0xb0b1 - MX6QDL_PAD_EIM_DA12__EIM_AD12 0xb0b1 - MX6QDL_PAD_EIM_DA11__EIM_AD11 0xb0b1 - MX6QDL_PAD_EIM_DA10__EIM_AD10 0xb0b1 - MX6QDL_PAD_EIM_DA9__EIM_AD09 0xb0b1 - MX6QDL_PAD_EIM_DA8__EIM_AD08 0xb0b1 - MX6QDL_PAD_EIM_DA7__EIM_AD07 0xb0b1 - MX6QDL_PAD_EIM_DA6__EIM_AD06 0xb0b1 - MX6QDL_PAD_EIM_DA5__EIM_AD05 0xb0b1 - MX6QDL_PAD_EIM_DA4__EIM_AD04 0xb0b1 - MX6QDL_PAD_EIM_DA3__EIM_AD03 0xb0b1 - MX6QDL_PAD_EIM_DA2__EIM_AD02 0xb0b1 - MX6QDL_PAD_EIM_DA1__EIM_AD01 0xb0b1 - MX6QDL_PAD_EIM_DA0__EIM_AD00 0xb0b1 - >; - }; - - pinctrl_weim_rdnwr: weimrdnwr { - fsl,pins = < - MX6QDL_PAD_SD2_CLK__GPIO1_IO10 0x0040 - MX6QDL_PAD_RGMII_TD3__GPIO6_IO23 0x130b0 - >; - }; - - pinctrl_weim_npwe: weimnpwe { - fsl,pins = < - MX6QDL_PAD_SD2_DAT3__GPIO1_IO12 0x0040 - MX6QDL_PAD_RGMII_TD2__GPIO6_IO22 0x130b0 - >; - }; - /* ADDRESS[16:18] [25] used as GPIO */ - pinctrl_weim_gpio_1: weimgpio-1 { + pinctrl_weim_gpio_1: weimgpio1grp { fsl,pins = < - MX6QDL_PAD_KEY_ROW4__GPIO4_IO15 0x1b0b0 - MX6QDL_PAD_KEY_ROW2__GPIO4_IO11 0x1b0b0 - MX6QDL_PAD_KEY_COL2__GPIO4_IO10 0x1b0b0 MX6QDL_PAD_DISP0_DAT23__GPIO5_IO17 0x1b0b0 MX6QDL_PAD_DISP0_DAT22__GPIO5_IO16 0x1b0b0 MX6QDL_PAD_DISP0_DAT21__GPIO5_IO15 0x1b0b0 MX6QDL_PAD_DISP0_DAT20__GPIO5_IO14 0x1b0b0 MX6QDL_PAD_DISP0_DAT19__GPIO5_IO13 0x1b0b0 MX6QDL_PAD_DISP0_DAT18__GPIO5_IO12 0x1b0b0 + MX6QDL_PAD_KEY_COL2__GPIO4_IO10 0x1b0b0 + MX6QDL_PAD_KEY_ROW4__GPIO4_IO15 0x1b0b0 + MX6QDL_PAD_KEY_ROW2__GPIO4_IO11 0x1b0b0 MX6QDL_PAD_NANDF_D1__GPIO2_IO01 0x1b0b0 >; }; /* ADDRESS[19:24] used as GPIO */ - pinctrl_weim_gpio_2: weimgpio-2 { + pinctrl_weim_gpio_2: weimgpio2grp { fsl,pins = < - MX6QDL_PAD_KEY_ROW2__GPIO4_IO11 0x1b0b0 - MX6QDL_PAD_KEY_COL2__GPIO4_IO10 0x1b0b0 - MX6QDL_PAD_DISP0_DAT23__GPIO5_IO17 0x1b0b0 - MX6QDL_PAD_DISP0_DAT22__GPIO5_IO16 0x1b0b0 - MX6QDL_PAD_DISP0_DAT21__GPIO5_IO15 0x1b0b0 - MX6QDL_PAD_DISP0_DAT20__GPIO5_IO14 0x1b0b0 - MX6QDL_PAD_DISP0_DAT19__GPIO5_IO13 0x1b0b0 MX6QDL_PAD_DISP0_DAT18__GPIO5_IO12 0x1b0b0 + MX6QDL_PAD_DISP0_DAT19__GPIO5_IO13 0x1b0b0 + MX6QDL_PAD_DISP0_DAT20__GPIO5_IO14 0x1b0b0 + MX6QDL_PAD_DISP0_DAT21__GPIO5_IO15 0x1b0b0 + MX6QDL_PAD_DISP0_DAT22__GPIO5_IO16 0x1b0b0 + MX6QDL_PAD_DISP0_DAT23__GPIO5_IO17 0x1b0b0 + MX6QDL_PAD_KEY_COL2__GPIO4_IO10 0x1b0b0 + MX6QDL_PAD_KEY_ROW2__GPIO4_IO11 0x1b0b0 MX6QDL_PAD_NANDF_D1__GPIO2_IO01 0x1b0b0 >; }; /* DATA[16:31] used as GPIO */ - pinctrl_weim_gpio_3: weimgpio-3 { + pinctrl_weim_gpio_3: weimgpio3grp { fsl,pins = < + MX6QDL_PAD_CSI0_MCLK__GPIO5_IO19 0x1b0b0 + MX6QDL_PAD_CSI0_PIXCLK__GPIO5_IO18 0x1b0b0 MX6QDL_PAD_EIM_LBA__GPIO2_IO27 0x1b0b0 MX6QDL_PAD_EIM_BCLK__GPIO6_IO31 0x1b0b0 - MX6QDL_PAD_NANDF_CS3__GPIO6_IO16 0x1b0b0 - MX6QDL_PAD_NANDF_CS1__GPIO6_IO14 0x1b0b0 - MX6QDL_PAD_NANDF_RB0__GPIO6_IO10 0x1b0b0 + MX6QDL_PAD_GPIO_2__GPIO1_IO02 0x1b0b0 + MX6QDL_PAD_GPIO_4__GPIO1_IO04 0x1b0b0 + MX6QDL_PAD_GPIO_5__GPIO1_IO05 0x1b0b0 + MX6QDL_PAD_GPIO_19__GPIO4_IO05 0x1b0b0 MX6QDL_PAD_NANDF_ALE__GPIO6_IO08 0x1b0b0 - MX6QDL_PAD_NANDF_WP_B__GPIO6_IO09 0x1b0b0 MX6QDL_PAD_NANDF_CS0__GPIO6_IO11 0x1b0b0 + MX6QDL_PAD_NANDF_CS1__GPIO6_IO14 0x1b0b0 + MX6QDL_PAD_NANDF_CS3__GPIO6_IO16 0x1b0b0 MX6QDL_PAD_NANDF_CLE__GPIO6_IO07 0x1b0b0 - MX6QDL_PAD_GPIO_19__GPIO4_IO05 0x1b0b0 - MX6QDL_PAD_CSI0_MCLK__GPIO5_IO19 0x1b0b0 - MX6QDL_PAD_CSI0_PIXCLK__GPIO5_IO18 0x1b0b0 - MX6QDL_PAD_GPIO_4__GPIO1_IO04 0x1b0b0 - MX6QDL_PAD_GPIO_5__GPIO1_IO05 0x1b0b0 - MX6QDL_PAD_GPIO_2__GPIO1_IO02 0x1b0b0 + MX6QDL_PAD_NANDF_RB0__GPIO6_IO10 0x1b0b0 + MX6QDL_PAD_NANDF_WP_B__GPIO6_IO09 0x1b0b0 >; }; /* DQM[0:3] used as GPIO */ - pinctrl_weim_gpio_4: weimgpio-4 { + pinctrl_weim_gpio_4: weimgpio4grp { fsl,pins = < MX6QDL_PAD_EIM_EB0__GPIO2_IO28 0x1b0b0 MX6QDL_PAD_EIM_EB1__GPIO2_IO29 0x1b0b0 - MX6QDL_PAD_SD2_DAT2__GPIO1_IO13 0x1b0b0 MX6QDL_PAD_NANDF_D0__GPIO2_IO00 0x1b0b0 + MX6QDL_PAD_SD2_DAT2__GPIO1_IO13 0x1b0b0 >; }; /* RDY used as GPIO */ - pinctrl_weim_gpio_5: weimgpio-5 { + pinctrl_weim_gpio_5: weimgpio5grp { fsl,pins = < MX6QDL_PAD_EIM_WAIT__GPIO5_IO00 0x1b0b0 >; }; /* ADDRESS[16] DATA[30] used as GPIO */ - pinctrl_weim_gpio_6: weimgpio-6 { + pinctrl_weim_gpio_6: weimgpio6grp { fsl,pins = < - MX6QDL_PAD_KEY_ROW4__GPIO4_IO15 0x1b0b0 MX6QDL_PAD_KEY_COL4__GPIO4_IO14 0x1b0b0 + MX6QDL_PAD_KEY_ROW4__GPIO4_IO15 0x1b0b0 + >; + }; + + pinctrl_weim_npwe: weimnpwegrp { + fsl,pins = < + MX6QDL_PAD_RGMII_TD2__GPIO6_IO22 0x130b0 + MX6QDL_PAD_SD2_DAT3__GPIO1_IO12 0x0040 + >; + }; + + pinctrl_weim_sram: weimsramgrp { + fsl,pins = < + /* Data */ + MX6QDL_PAD_CSI0_DAT4__EIM_DATA02 0x1b0b0 + MX6QDL_PAD_CSI0_DAT5__EIM_DATA03 0x1b0b0 + MX6QDL_PAD_CSI0_DAT6__EIM_DATA04 0x1b0b0 + MX6QDL_PAD_CSI0_DAT7__EIM_DATA05 0x1b0b0 + MX6QDL_PAD_CSI0_DAT8__EIM_DATA06 0x1b0b0 + MX6QDL_PAD_CSI0_DAT9__EIM_DATA07 0x1b0b0 + MX6QDL_PAD_CSI0_DAT12__EIM_DATA08 0x1b0b0 + MX6QDL_PAD_CSI0_DAT13__EIM_DATA09 0x1b0b0 + MX6QDL_PAD_CSI0_DAT14__EIM_DATA10 0x1b0b0 + MX6QDL_PAD_CSI0_DAT15__EIM_DATA11 0x1b0b0 + MX6QDL_PAD_CSI0_DAT16__EIM_DATA12 0x1b0b0 + MX6QDL_PAD_CSI0_DAT17__EIM_DATA13 0x1b0b0 + MX6QDL_PAD_CSI0_DAT18__EIM_DATA14 0x1b0b0 + MX6QDL_PAD_CSI0_DAT19__EIM_DATA15 0x1b0b0 + MX6QDL_PAD_CSI0_DATA_EN__EIM_DATA00 0x1b0b0 + MX6QDL_PAD_CSI0_VSYNC__EIM_DATA01 0x1b0b0 + /* Address */ + MX6QDL_PAD_EIM_DA0__EIM_AD00 0xb0b1 + MX6QDL_PAD_EIM_DA1__EIM_AD01 0xb0b1 + MX6QDL_PAD_EIM_DA2__EIM_AD02 0xb0b1 + MX6QDL_PAD_EIM_DA3__EIM_AD03 0xb0b1 + MX6QDL_PAD_EIM_DA4__EIM_AD04 0xb0b1 + MX6QDL_PAD_EIM_DA5__EIM_AD05 0xb0b1 + MX6QDL_PAD_EIM_DA6__EIM_AD06 0xb0b1 + MX6QDL_PAD_EIM_DA7__EIM_AD07 0xb0b1 + MX6QDL_PAD_EIM_DA8__EIM_AD08 0xb0b1 + MX6QDL_PAD_EIM_DA9__EIM_AD09 0xb0b1 + MX6QDL_PAD_EIM_DA10__EIM_AD10 0xb0b1 + MX6QDL_PAD_EIM_DA11__EIM_AD11 0xb0b1 + MX6QDL_PAD_EIM_DA12__EIM_AD12 0xb0b1 + MX6QDL_PAD_EIM_DA13__EIM_AD13 0xb0b1 + MX6QDL_PAD_EIM_DA14__EIM_AD14 0xb0b1 + MX6QDL_PAD_EIM_DA15__EIM_AD15 0xb0b1 + /* Ctrl */ + MX6QDL_PAD_EIM_OE__EIM_OE_B 0xb0b1 + MX6QDL_PAD_EIM_RW__EIM_RW 0xb0b1 + >; + }; + + pinctrl_weim_rdnwr: weimrdnwrgrp { + fsl,pins = < + MX6QDL_PAD_RGMII_TD3__GPIO6_IO23 0x130b0 + MX6QDL_PAD_SD2_CLK__GPIO1_IO10 0x0040 >; }; }; diff --git a/arch/arm/boot/dts/imx6qdl-dfi-fs700-m60.dtsi b/arch/arm/boot/dts/imx6qdl-dfi-fs700-m60.dtsi index 648f5fcb72e6..2c1d6f28e695 100644 --- a/arch/arm/boot/dts/imx6qdl-dfi-fs700-m60.dtsi +++ b/arch/arm/boot/dts/imx6qdl-dfi-fs700-m60.dtsi @@ -35,7 +35,7 @@ pinctrl-0 = <&pinctrl_ecspi3>; status = "okay"; - flash: m25p80@0 { + flash: flash@0 { #address-cells = <1>; #size-cells = <1>; compatible = "sst,sst25vf040b", "jedec,spi-nor"; diff --git a/arch/arm/boot/dts/imx6qdl-kontron-samx6i.dtsi b/arch/arm/boot/dts/imx6qdl-kontron-samx6i.dtsi index b167b33bd108..095c9143d99a 100644 --- a/arch/arm/boot/dts/imx6qdl-kontron-samx6i.dtsi +++ b/arch/arm/boot/dts/imx6qdl-kontron-samx6i.dtsi @@ -258,7 +258,7 @@ status = "okay"; /* default boot source: workaround #1 for errata ERR006282 */ - smarc_flash: spi-flash@0 { + smarc_flash: flash@0 { compatible = "winbond,w25q16dw", "jedec,spi-nor"; reg = <0>; spi-max-frequency = <20000000>; diff --git a/arch/arm/boot/dts/imx6qdl-nit6xlite.dtsi b/arch/arm/boot/dts/imx6qdl-nit6xlite.dtsi index ac34709e9741..0ad4cb4f1e82 100644 --- a/arch/arm/boot/dts/imx6qdl-nit6xlite.dtsi +++ b/arch/arm/boot/dts/imx6qdl-nit6xlite.dtsi @@ -179,7 +179,7 @@ pinctrl-0 = <&pinctrl_ecspi1>; status = "okay"; - flash: m25p80@0 { + flash: flash@0 { compatible = "microchip,sst25vf016b"; spi-max-frequency = <20000000>; reg = <0>; diff --git a/arch/arm/boot/dts/imx6qdl-nitrogen6_max.dtsi b/arch/arm/boot/dts/imx6qdl-nitrogen6_max.dtsi index c96f4d7e1e0d..beaa2dcd436c 100644 --- a/arch/arm/boot/dts/imx6qdl-nitrogen6_max.dtsi +++ b/arch/arm/boot/dts/imx6qdl-nitrogen6_max.dtsi @@ -321,7 +321,7 @@ pinctrl-0 = <&pinctrl_ecspi1>; status = "okay"; - flash: m25p80@0 { + flash: flash@0 { compatible = "microchip,sst25vf016b"; spi-max-frequency = <20000000>; reg = <0>; diff --git a/arch/arm/boot/dts/imx6qdl-nitrogen6_som2.dtsi b/arch/arm/boot/dts/imx6qdl-nitrogen6_som2.dtsi index 92d09a3ebe0e..ee7e2371f94b 100644 --- a/arch/arm/boot/dts/imx6qdl-nitrogen6_som2.dtsi +++ b/arch/arm/boot/dts/imx6qdl-nitrogen6_som2.dtsi @@ -252,7 +252,7 @@ pinctrl-0 = <&pinctrl_ecspi1>; status = "okay"; - flash: m25p80@0 { + flash: flash@0 { compatible = "microchip,sst25vf016b"; spi-max-frequency = <20000000>; reg = <0>; diff --git a/arch/arm/boot/dts/imx6qdl-nitrogen6x.dtsi b/arch/arm/boot/dts/imx6qdl-nitrogen6x.dtsi index 49da30d7510c..904d5d051d63 100644 --- a/arch/arm/boot/dts/imx6qdl-nitrogen6x.dtsi +++ b/arch/arm/boot/dts/imx6qdl-nitrogen6x.dtsi @@ -237,7 +237,7 @@ pinctrl-0 = <&pinctrl_ecspi1>; status = "okay"; - flash: m25p80@0 { + flash: flash@0 { compatible = "sst,sst25vf016b", "jedec,spi-nor"; spi-max-frequency = <20000000>; reg = <0>; diff --git a/arch/arm/boot/dts/imx6qdl-phytec-pfla02.dtsi b/arch/arm/boot/dts/imx6qdl-phytec-pfla02.dtsi index 1f2ba6f6254e..768bc0e3a2b3 100644 --- a/arch/arm/boot/dts/imx6qdl-phytec-pfla02.dtsi +++ b/arch/arm/boot/dts/imx6qdl-phytec-pfla02.dtsi @@ -47,12 +47,12 @@ pinctrl-0 = <&pinctrl_leds>; compatible = "gpio-leds"; - green { + led_green: green { label = "phyflex:green"; gpios = <&gpio1 30 0>; }; - red { + led_red: red { label = "phyflex:red"; gpios = <&gpio2 31 0>; }; diff --git a/arch/arm/boot/dts/imx6qdl-sabreauto.dtsi b/arch/arm/boot/dts/imx6qdl-sabreauto.dtsi index 5e58740d40c5..1368a4762037 100644 --- a/arch/arm/boot/dts/imx6qdl-sabreauto.dtsi +++ b/arch/arm/boot/dts/imx6qdl-sabreauto.dtsi @@ -272,7 +272,7 @@ pinctrl-0 = <&pinctrl_ecspi1 &pinctrl_ecspi1_cs>; status = "disabled"; /* pin conflict with WEIM NOR */ - flash: m25p80@0 { + flash: flash@0 { #address-cells = <1>; #size-cells = <1>; compatible = "st,m25p32", "jedec,spi-nor"; diff --git a/arch/arm/boot/dts/imx6qdl-sabrelite.dtsi b/arch/arm/boot/dts/imx6qdl-sabrelite.dtsi index eb9a0b104f1c..901b9a761b66 100644 --- a/arch/arm/boot/dts/imx6qdl-sabrelite.dtsi +++ b/arch/arm/boot/dts/imx6qdl-sabrelite.dtsi @@ -313,7 +313,7 @@ pinctrl-0 = <&pinctrl_ecspi1>; status = "okay"; - flash: m25p80@0 { + flash: flash@0 { compatible = "sst,sst25vf016b", "jedec,spi-nor"; spi-max-frequency = <20000000>; reg = <0>; diff --git a/arch/arm/boot/dts/imx6qdl-sabresd.dtsi b/arch/arm/boot/dts/imx6qdl-sabresd.dtsi index 0c0105468a2f..37482a9023fc 100644 --- a/arch/arm/boot/dts/imx6qdl-sabresd.dtsi +++ b/arch/arm/boot/dts/imx6qdl-sabresd.dtsi @@ -197,7 +197,7 @@ pinctrl-0 = <&pinctrl_ecspi1>; status = "okay"; - flash: m25p80@0 { + flash: flash@0 { #address-cells = <1>; #size-cells = <1>; compatible = "st,m25p32", "jedec,spi-nor"; diff --git a/arch/arm/boot/dts/imx6qdl-tx6.dtsi b/arch/arm/boot/dts/imx6qdl-tx6.dtsi index bcc5bbcce769..f41f86a76ea9 100644 --- a/arch/arm/boot/dts/imx6qdl-tx6.dtsi +++ b/arch/arm/boot/dts/imx6qdl-tx6.dtsi @@ -264,11 +264,6 @@ &fec { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_enet &pinctrl_enet_mdio &pinctrl_etnphy_rst>; - clocks = <&clks IMX6QDL_CLK_ENET>, - <&clks IMX6QDL_CLK_ENET>, - <&clks IMX6QDL_CLK_ENET_REF>, - <&clks IMX6QDL_CLK_ENET_REF>; - clock-names = "ipg", "ahb", "ptp", "enet_out"; phy-mode = "rmii"; phy-reset-gpios = <&gpio7 6 GPIO_ACTIVE_LOW>; phy-reset-post-delay = <10>; diff --git a/arch/arm/boot/dts/imx6qdl-udoo.dtsi b/arch/arm/boot/dts/imx6qdl-udoo.dtsi index ccfa8e320be6..93a8123da27d 100644 --- a/arch/arm/boot/dts/imx6qdl-udoo.dtsi +++ b/arch/arm/boot/dts/imx6qdl-udoo.dtsi @@ -295,7 +295,7 @@ pinctrl-0 = <&pinctrl_usbh>; vbus-supply = <®_usb_h1_vbus>; clocks = <&clks IMX6QDL_CLK_CKO>; - status = "okay"; + status = "disabled"; }; &usbotg { diff --git a/arch/arm/boot/dts/imx6qdl-vicut1-12inch.dtsi b/arch/arm/boot/dts/imx6qdl-vicut1-12inch.dtsi new file mode 100644 index 000000000000..f505f2704530 --- /dev/null +++ b/arch/arm/boot/dts/imx6qdl-vicut1-12inch.dtsi @@ -0,0 +1,128 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT +/* + * Copyright (c) 2021 Protonic Holland + */ + +/ { + gpio-keys { + compatible = "gpio-keys"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_gpiokeys>; + autorepeat; + + power { + label = "Power Button"; + gpios = <&gpio2 23 GPIO_ACTIVE_LOW>; + linux,code = <KEY_POWER>; + wakeup-source; + }; + }; + + panel { + compatible = "kyo,tcg121xglp"; + backlight = <&backlight_lcd>; + power-supply = <®_3v3>; + + port { + panel_in: endpoint { + remote-endpoint = <&lvds0_out>; + }; + }; + }; +}; + +&fec { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_enet>; + phy-mode = "rgmii-id"; + phy-handle = <&rgmii_phy>; + status = "okay"; + + mdio { + #address-cells = <1>; + #size-cells = <0>; + + /* Microchip KSZ9031RNX PHY */ + rgmii_phy: ethernet-phy@0 { + reg = <0>; + interrupts-extended = <&gpio1 28 IRQ_TYPE_LEVEL_LOW>; + reset-gpios = <&gpio1 25 GPIO_ACTIVE_LOW>; + reset-assert-us = <10000>; + reset-deassert-us = <300>; + }; + }; +}; + +&gpio1 { + gpio-line-names = + "CAN1_TERM", "SD1_CD", "ITU656_RESET", "CAM1_MIRROR", + "CAM2_MIRROR", "", "", "SMBALERT", + "DEBUG_0", "DEBUG_1", "", "", "", "", "", "", + "SD1_DATA0", "SD1_DATA1", "SD1_CMD", "SD1_DATA2", "SD1_CLK", + "SD1_DATA3", "ETH_MDIO", "", + "", "ETH_RESET", "", "", "ETH_INT", "", "", "ETH_MDC"; +}; + +&gpio4 { + gpio-line-names = + "", "", "", "", "", "", "UART4_TXD", "UART4_RXD", + "UART5_TXD", "UART5_RXD", "CAN1_TX", "CAN1_RX", "CAN1_SR", + "CAN2_SR", "CAN2_TX", "CAN2_RX", + "", "", "DIP1_FB", "", "VCAM_EN", "ON1_CTRL", "ON2_CTRL", + "HITCH_IN_OUT", + "LIGHT_ON", "", "", "CONTACT_IN", "BL_EN", "BL_PWM", "", + "ISB_LED"; +}; + +&gpio5 { + gpio-line-names = + "", "", "", "", "", "", "", "", + "", "", "", "", "", "", "", "", + "", "", "ITU656_CLK", "I2S_MCLK", "ITU656_PDN", "AUDIO_RESET", + "I2S_BITCLK", "I2S_DOUT", + "I2S_LRCLK", "I2S_DIN", "I2C1_SDA", "I2C1_SCL", "YACO_AUX_RX", + "YACO_AUX_TX", "ITU656_D0", "ITU656_D1"; +}; + +&gpio6 { + gpio-line-names = + "ITU656_D2", "ITU656_D3", "ITU656_D4", "ITU656_D5", + "ITU656_D6", "ITU656_D7", "", "", + "", "", "", "", "", "", "", "", + "", "", "", "RGMII_TXC", "RGMII_TD0", "RGMII_TD1", "RGMII_TD2", + "RGMII_TD3", + "RGMII_RX_CTL", "RGMII_RD0", "RGMII_TX_CTL", "RGMII_RD1", + "RGMII_RD2", "RGMII_RD3", "", ""; +}; + +&iomuxc { + pinctrl_enet: enetgrp { + fsl,pins = < + MX6QDL_PAD_RGMII_RXC__RGMII_RXC 0x1b030 + MX6QDL_PAD_RGMII_RD0__RGMII_RD0 0x1b030 + MX6QDL_PAD_RGMII_RD1__RGMII_RD1 0x1b030 + MX6QDL_PAD_RGMII_RD2__RGMII_RD2 0x1b030 + MX6QDL_PAD_RGMII_RD3__RGMII_RD3 0x1b030 + MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL 0x1b030 + MX6QDL_PAD_RGMII_TXC__RGMII_TXC 0x10030 + MX6QDL_PAD_RGMII_TD0__RGMII_TD0 0x10030 + MX6QDL_PAD_RGMII_TD1__RGMII_TD1 0x10030 + MX6QDL_PAD_RGMII_TD2__RGMII_TD2 0x10030 + MX6QDL_PAD_RGMII_TD3__RGMII_TD3 0x10030 + MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL 0x10030 + MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK 0x10030 + MX6QDL_PAD_ENET_MDIO__ENET_MDIO 0x10030 + MX6QDL_PAD_ENET_MDC__ENET_MDC 0x10030 + /* Phy reset */ + MX6QDL_PAD_ENET_CRS_DV__GPIO1_IO25 0x1b0b0 + MX6QDL_PAD_ENET_TX_EN__GPIO1_IO28 0x1b0b1 + >; + }; + + pinctrl_gpiokeys: gpiokeygrp { + fsl,pins = < + /* nON_SWITCH */ + MX6QDL_PAD_EIM_CS0__GPIO2_IO23 0x1b0b0 + >; + }; +}; diff --git a/arch/arm/boot/dts/imx6qdl-vicut1.dtsi b/arch/arm/boot/dts/imx6qdl-vicut1.dtsi index 1ac7e13249d2..a1676b5d2980 100644 --- a/arch/arm/boot/dts/imx6qdl-vicut1.dtsi +++ b/arch/arm/boot/dts/imx6qdl-vicut1.dtsi @@ -16,18 +16,27 @@ stdout-path = &uart4; }; - backlight: backlight { + backlight_lcd: backlight { compatible = "pwm-backlight"; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_backlight>; pwms = <&pwm1 0 5000000 0>; brightness-levels = <0 16 64 255>; num-interpolated-steps = <16>; - default-brightness-level = <1>; + default-brightness-level = <48>; power-supply = <®_3v3>; enable-gpios = <&gpio4 28 GPIO_ACTIVE_HIGH>; }; + backlight_led: backlight_led { + compatible = "pwm-backlight"; + pwms = <&pwm3 0 5000000 0>; + brightness-levels = <0 16 64 255>; + num-interpolated-steps = <16>; + default-brightness-level = <48>; + power-supply = <®_3v3>; + }; + connector { compatible = "composite-video-connector"; label = "Composite0"; @@ -61,54 +70,37 @@ gpios = <&gpio2 2 GPIO_ACTIVE_LOW>; }; - gpio-keys { - compatible = "gpio-keys"; - autorepeat; - - power { - label = "Power Button"; - gpios = <&gpio2 23 GPIO_ACTIVE_LOW>; - linux,code = <KEY_POWER>; - wakeup-source; - }; - }; - leds { compatible = "gpio-leds"; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_leds>; led-0 { - label = "LED_DI0_DEBUG_0"; + label = "debug0"; function = LED_FUNCTION_HEARTBEAT; - gpios = <&gpio4 16 GPIO_ACTIVE_HIGH>; + gpios = <&gpio1 8 GPIO_ACTIVE_HIGH>; linux,default-trigger = "heartbeat"; }; led-1 { - label = "LED_DI0_DEBUG_1"; + label = "debug1"; function = LED_FUNCTION_DISK; - gpios = <&gpio4 17 GPIO_ACTIVE_HIGH>; + gpios = <&gpio1 9 GPIO_ACTIVE_HIGH>; linux,default-trigger = "disk-activity"; }; led-2 { - label = "POWER_LED"; + label = "power_led"; function = LED_FUNCTION_POWER; gpios = <&gpio2 24 GPIO_ACTIVE_HIGH>; default-state = "on"; }; - }; - - panel { - compatible = "kyo,tcg121xglp"; - backlight = <&backlight>; - power-supply = <®_3v3>; - port { - panel_in: endpoint { - remote-endpoint = <&lvds0_out>; - }; + led-3 { + label = "isb_led"; + function = LED_FUNCTION_POWER; + gpios = <&gpio4 31 GPIO_ACTIVE_HIGH>; + default-state = "on"; }; }; @@ -135,18 +127,6 @@ enable-active-high; }; - reg_wifi: regulator-wifi { - compatible = "regulator-fixed"; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_wifi_npd>; - regulator-name = "wifi"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - gpio = <&gpio1 26 GPIO_ACTIVE_HIGH>; - enable-active-high; - startup-delay-us = <70000>; - }; - sound { compatible = "simple-audio-card"; simple-audio-card,name = "prti6q-sgtl5000"; @@ -173,6 +153,14 @@ frame-master; }; }; + + thermal-zones { + chassis-thermal { + polling-delay = <20000>; + polling-delay-passive = <0>; + thermal-sensors = <&tsens0>; + }; + }; }; &audmux { @@ -232,47 +220,13 @@ }; }; -&fec { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_enet>; - phy-mode = "rgmii-id"; - phy-handle = <&rgmii_phy>; - status = "okay"; - - mdio { - #address-cells = <1>; - #size-cells = <0>; - - /* Microchip KSZ9031RNX PHY */ - rgmii_phy: ethernet-phy@0 { - reg = <0>; - interrupts-extended = <&gpio1 28 IRQ_TYPE_LEVEL_LOW>; - reset-gpios = <&gpio1 25 GPIO_ACTIVE_LOW>; - reset-assert-us = <10000>; - reset-deassert-us = <300>; - }; - }; -}; - -&gpio1 { - gpio-line-names = - "CAN1_TERM", "SD1_CD", "ITU656_RESET", "CAM1_MIRROR", - "CAM2_MIRROR", "", "", "SMBALERT", - "DEBUG_0", "DEBUG_1", "SDIO_SCK", "SDIO_CMD", "SDIO_D3", - "SDIO_D2", "SDIO_D1", "SDIO_D0", - "SD1_DATA0", "SD1_DATA1", "SD1_CMD", "SD1_DATA2", "SD1_CLK", - "SD1_DATA3", "", "", - "", "ETH_RESET", "WIFI_PD", "WIFI_BT_RST", "ETH_INT", "", - "WL_IRQ", "ETH_MDC"; -}; - &gpio2 { gpio-line-names = - "count0", "count1", "count2", "", "", "", "", "", - "REV_ID0", "REV_ID1", "REV_ID2", "REV_ID3", "REV_ID4", - "BOARD_ID0", "BOARD_ID1", "BOARD_ID2", - "", "", "", "", "", "", "", "ON_SWITCH", - "POWER_LED", "", "ECSPI2_SS0", "", "", "", "", ""; + "YACO_WHEEL", "YACO_RADAR", "YACO_PTO", "", "", "", "", "", + "", "LED_PWM", "", "", "", + "", "", "", + "", "", "", "", "", "ISB_IN2", "ISB_nIN1", "ON_SWITCH", + "POWER_LED", "", "", "", "", "", "", ""; }; &gpio3 { @@ -281,37 +235,8 @@ "", "", "", "", "", "", "", "", "ECSPI1_SCLK", "ECSPI1_MISO", "ECSPI1_MOSI", "ECSPI1_SS1", "CPU_ON1_FB", "USB_OTG_OC", "USB_OTG_PWR", "YACO_IRQ", - "", "", "", "", "", "", "", ""; -}; - -&gpio4 { - gpio-line-names = - "", "", "", "", "", "", "UART4_TXD", "UART4_RXD", - "UART5_TXD", "UART5_RXD", "CAN1_TX", "CAN1_RX", "CAN1_SR", - "CAN2_SR", "CAN2_TX", "CAN2_RX", - "LED_DI0_DEBUG_0", "LED_DI0_DEBUG_1", "", "", "", "", "", "", - "", "", "", "", "BL_EN", "BL_PWM", "", ""; -}; - -&gpio5 { - gpio-line-names = - "", "", "", "", "", "PCIE_WAKE", "PCIE_CLKREQ", "PCIE_W_DIS", - "PCIE_RESET", "", "", "", "", "", "", "", - "", "", "ITU656_CLK", "I2S_MCLK", "ITU656_PDN", "AUDIO_RESET", - "I2S_BITCLK", "I2S_DOUT", - "I2S_LRCLK", "I2S_DIN", "I2C1_SDA", "I2C1_SCL", "YACO_AUX_RX", - "YACO_AUX_TX", "ITU656_D0", "ITU656_D1"; -}; - -&gpio6 { - gpio-line-names = - "ITU656_D2", "ITU656_D3", "ITU656_D4", "ITU656_D5", - "ITU656_D6", "ITU656_D7", "", "", - "", "", "", "", "", "", "", "", - "", "", "", "RGMII_TXC", "RGMII_TD0", "RGMII_TD1", "RGMII_TD2", - "RGMII_TD3", - "RGMII_RX_CTL", "RGMII_RD0", "RGMII_TX_CTL", "RGMII_RD1", - "RGMII_RD2", "RGMII_RD3", "", ""; + "TSS_TXD", "TSS_RXD", "", "", "", "", "YACO_BOOT0", + "YACO_RESET"; }; &gpio7 { @@ -406,9 +331,10 @@ reg = <0x51>; }; - temperature-sensor@70 { + tsens0: temperature-sensor@70 { compatible = "ti,tmp103"; reg = <0x70>; + #thermal-sensor-cells = <0>; }; }; @@ -438,13 +364,15 @@ }; }; -&pcie { +&pwm1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pwm1>; status = "okay"; }; -&pwm1 { +&pwm3 { pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_pwm1>; + pinctrl-0 = <&pinctrl_pwm3>; status = "okay"; }; @@ -460,12 +388,6 @@ status = "okay"; }; -&uart2 { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_uart2>; - status = "okay"; -}; - &uart3 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_uart3>; @@ -513,26 +435,6 @@ status = "okay"; }; -&usdhc2 { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_usdhc2>; - vmmc-supply = <®_wifi>; - non-removable; - cap-power-off-card; - keep-power-in-suspend; - no-1-8-v; - no-mmc; - no-sd; - status = "okay"; - - wifi { - compatible = "ti,wl1271"; - interrupts-extended = <&gpio1 30 IRQ_TYPE_LEVEL_HIGH>; - ref-clock-frequency = "38400000"; - tcxo-clock-frequency = "19200000"; - }; -}; - &usdhc3 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_usdhc3>; @@ -613,29 +515,6 @@ >; }; - pinctrl_enet: enetgrp { - fsl,pins = < - MX6QDL_PAD_RGMII_RXC__RGMII_RXC 0x1b030 - MX6QDL_PAD_RGMII_RD0__RGMII_RD0 0x1b030 - MX6QDL_PAD_RGMII_RD1__RGMII_RD1 0x1b030 - MX6QDL_PAD_RGMII_RD2__RGMII_RD2 0x1b030 - MX6QDL_PAD_RGMII_RD3__RGMII_RD3 0x1b030 - MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL 0x1b030 - MX6QDL_PAD_RGMII_TXC__RGMII_TXC 0x10030 - MX6QDL_PAD_RGMII_TD0__RGMII_TD0 0x10030 - MX6QDL_PAD_RGMII_TD1__RGMII_TD1 0x10030 - MX6QDL_PAD_RGMII_TD2__RGMII_TD2 0x10030 - MX6QDL_PAD_RGMII_TD3__RGMII_TD3 0x10030 - MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL 0x10030 - MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK 0x10030 - MX6QDL_PAD_ENET_MDIO__ENET_MDIO 0x10030 - MX6QDL_PAD_ENET_MDC__ENET_MDC 0x10030 - /* Phy reset */ - MX6QDL_PAD_ENET_CRS_DV__GPIO1_IO25 0x1b0b0 - MX6QDL_PAD_ENET_TX_EN__GPIO1_IO28 0x1b0b1 - >; - }; - pinctrl_hog: hoggrp { fsl,pins = < /* ITU656_nRESET */ @@ -646,8 +525,6 @@ MX6QDL_PAD_GPIO_4__GPIO1_IO04 0x130b0 /* CAM_nDETECT */ MX6QDL_PAD_GPIO_17__GPIO7_IO12 0x1b0b0 - /* nON_SWITCH */ - MX6QDL_PAD_EIM_CS0__GPIO2_IO23 0x1b0b0 /* ISB_IN1 */ MX6QDL_PAD_EIM_A16__GPIO2_IO22 0x130b0 /* ISB_nIN2 */ @@ -669,27 +546,11 @@ /* ITU656_nPDN */ MX6QDL_PAD_CSI0_DATA_EN__GPIO5_IO20 0x1b0b0 - /* HW revision detect */ - /* REV_ID0 */ - MX6QDL_PAD_SD4_DAT0__GPIO2_IO08 0x1b0b0 - /* REV_ID1 */ - MX6QDL_PAD_SD4_DAT1__GPIO2_IO09 0x1b0b0 - /* REV_ID2 */ - MX6QDL_PAD_SD4_DAT2__GPIO2_IO10 0x1b0b0 - /* REV_ID3 */ - MX6QDL_PAD_SD4_DAT3__GPIO2_IO11 0x1b0b0 - /* REV_ID4 */ - MX6QDL_PAD_SD4_DAT4__GPIO2_IO12 0x1b0b0 - /* New in HW revision 1 */ /* ON1_FB */ MX6QDL_PAD_EIM_D20__GPIO3_IO20 0x100b0 /* DIP1_FB */ MX6QDL_PAD_DI0_PIN2__GPIO4_IO18 0x1b0b0 - - /* New in UT2: FIXME: ISB PWM should start off, PD */ - /* ISB_LED_PWM */ - MX6QDL_PAD_DISP0_DAT9__GPIO4_IO30 0x130b0 >; }; @@ -729,6 +590,8 @@ MX6QDL_PAD_DI0_PIN15__GPIO4_IO17 0x1b0b0 /* POWER_LED */ MX6QDL_PAD_EIM_CS1__GPIO2_IO24 0x1b0b0 + /* ISB_LED */ + MX6QDL_PAD_DISP0_DAT10__GPIO4_IO31 0x1b0b0 >; }; @@ -738,20 +601,17 @@ >; }; - /* YaCO AUX Uart */ - pinctrl_uart1: uart1grp { + pinctrl_pwm3: pwm3grp { fsl,pins = < - MX6QDL_PAD_CSI0_DAT10__UART1_TX_DATA 0x1b0b1 - MX6QDL_PAD_CSI0_DAT11__UART1_RX_DATA 0x1b0b1 + MX6QDL_PAD_SD4_DAT1__PWM3_OUT 0x1b0b0 >; }; - pinctrl_uart2: uart2grp { + /* YaCO AUX Uart */ + pinctrl_uart1: uart1grp { fsl,pins = < - MX6QDL_PAD_EIM_D26__UART2_RX_DATA 0x1b0b1 - MX6QDL_PAD_EIM_D27__UART2_TX_DATA 0x1b0b1 - MX6QDL_PAD_EIM_D28__UART2_DTE_CTS_B 0x1b0b1 - MX6QDL_PAD_EIM_D29__UART2_DTE_RTS_B 0x1b0b1 + MX6QDL_PAD_CSI0_DAT10__UART1_TX_DATA 0x1b0b1 + MX6QDL_PAD_CSI0_DAT11__UART1_RX_DATA 0x1b0b1 >; }; @@ -797,19 +657,6 @@ >; }; - pinctrl_usdhc2: usdhc2grp { - fsl,pins = < - MX6QDL_PAD_SD2_CMD__SD2_CMD 0x170b9 - MX6QDL_PAD_SD2_CLK__SD2_CLK 0x100b9 - MX6QDL_PAD_SD2_DAT0__SD2_DATA0 0x170b9 - MX6QDL_PAD_SD2_DAT1__SD2_DATA1 0x170b9 - MX6QDL_PAD_SD2_DAT2__SD2_DATA2 0x170b9 - MX6QDL_PAD_SD2_DAT3__SD2_DATA3 0x170b9 - /* WL12xx IRQ */ - MX6QDL_PAD_ENET_TXD0__GPIO1_IO30 0x10880 - >; - }; - pinctrl_usdhc3: usdhc3grp { fsl,pins = < MX6QDL_PAD_SD3_CMD__SD3_CMD 0x17099 @@ -825,10 +672,4 @@ MX6QDL_PAD_SD3_RST__SD3_RESET 0x1b0b1 >; }; - - pinctrl_wifi_npd: wifinpdgrp { - fsl,pins = < - MX6QDL_PAD_ENET_RXD1__GPIO1_IO26 0x1b8b0 - >; - }; }; diff --git a/arch/arm/boot/dts/imx6qp-vicutp.dts b/arch/arm/boot/dts/imx6qp-vicutp.dts index 7bad7ca6b12e..49ff145fffe5 100644 --- a/arch/arm/boot/dts/imx6qp-vicutp.dts +++ b/arch/arm/boot/dts/imx6qp-vicutp.dts @@ -6,6 +6,7 @@ /dts-v1/; #include "imx6qp.dtsi" #include "imx6qdl-vicut1.dtsi" +#include "imx6qdl-vicut1-12inch.dtsi" / { model = "Kverneland UT1P Board"; diff --git a/arch/arm/boot/dts/imx6sl-evk.dts b/arch/arm/boot/dts/imx6sl-evk.dts index 25f6f2fb1555..f16c830f1e91 100644 --- a/arch/arm/boot/dts/imx6sl-evk.dts +++ b/arch/arm/boot/dts/imx6sl-evk.dts @@ -137,7 +137,7 @@ pinctrl-0 = <&pinctrl_ecspi1>; status = "okay"; - flash: m25p80@0 { + flash: flash@0 { #address-cells = <1>; #size-cells = <1>; compatible = "st,m25p32", "jedec,spi-nor"; diff --git a/arch/arm/boot/dts/imx6sl.dtsi b/arch/arm/boot/dts/imx6sl.dtsi index c7d907c5c352..06a515121dfc 100644 --- a/arch/arm/boot/dts/imx6sl.dtsi +++ b/arch/arm/boot/dts/imx6sl.dtsi @@ -50,7 +50,7 @@ #address-cells = <1>; #size-cells = <0>; - cpu@0 { + cpu0: cpu@0 { compatible = "arm,cortex-a9"; device_type = "cpu"; reg = <0x0>; diff --git a/arch/arm/boot/dts/imx6sx-nitrogen6sx.dts b/arch/arm/boot/dts/imx6sx-nitrogen6sx.dts index 66af78e83b70..a2c79bcf9a11 100644 --- a/arch/arm/boot/dts/imx6sx-nitrogen6sx.dts +++ b/arch/arm/boot/dts/imx6sx-nitrogen6sx.dts @@ -107,7 +107,7 @@ pinctrl-0 = <&pinctrl_ecspi1>; status = "okay"; - flash: m25p80@0 { + flash: flash@0 { compatible = "microchip,sst25vf016b"; spi-max-frequency = <20000000>; reg = <0>; diff --git a/arch/arm/boot/dts/imx6sx-sdb-reva.dts b/arch/arm/boot/dts/imx6sx-sdb-reva.dts index dce5dcf96c25..7dda42553f4b 100644 --- a/arch/arm/boot/dts/imx6sx-sdb-reva.dts +++ b/arch/arm/boot/dts/imx6sx-sdb-reva.dts @@ -123,7 +123,7 @@ pinctrl-0 = <&pinctrl_qspi2>; status = "okay"; - flash0: s25fl128s@0 { + flash0: flash@0 { reg = <0>; #address-cells = <1>; #size-cells = <1>; @@ -133,7 +133,7 @@ spi-tx-bus-width = <4>; }; - flash1: s25fl128s@2 { + flash1: flash@2 { reg = <2>; #address-cells = <1>; #size-cells = <1>; diff --git a/arch/arm/boot/dts/imx6sx-sdb.dts b/arch/arm/boot/dts/imx6sx-sdb.dts index 99f4cf777a38..969cfe920d25 100644 --- a/arch/arm/boot/dts/imx6sx-sdb.dts +++ b/arch/arm/boot/dts/imx6sx-sdb.dts @@ -108,7 +108,7 @@ pinctrl-0 = <&pinctrl_qspi2>; status = "okay"; - flash0: n25q256a@0 { + flash0: flash@0 { #address-cells = <1>; #size-cells = <1>; compatible = "micron,n25q256a", "jedec,spi-nor"; @@ -118,7 +118,7 @@ reg = <0>; }; - flash1: n25q256a@2 { + flash1: flash@2 { #address-cells = <1>; #size-cells = <1>; compatible = "micron,n25q256a", "jedec,spi-nor"; diff --git a/arch/arm/boot/dts/imx6ul-14x14-evk.dtsi b/arch/arm/boot/dts/imx6ul-14x14-evk.dtsi index a3fde3316c73..1a18c41ce385 100644 --- a/arch/arm/boot/dts/imx6ul-14x14-evk.dtsi +++ b/arch/arm/boot/dts/imx6ul-14x14-evk.dtsi @@ -286,7 +286,7 @@ pinctrl-0 = <&pinctrl_qspi>; status = "okay"; - flash0: n25q256a@0 { + flash0: flash@0 { #address-cells = <1>; #size-cells = <1>; compatible = "micron,n25q256a", "jedec,spi-nor"; diff --git a/arch/arm/boot/dts/imx6ul-kontron-n6310-som.dtsi b/arch/arm/boot/dts/imx6ul-kontron-n6310-som.dtsi index 47d3ce5d255f..acd936540d89 100644 --- a/arch/arm/boot/dts/imx6ul-kontron-n6310-som.dtsi +++ b/arch/arm/boot/dts/imx6ul-kontron-n6310-som.dtsi @@ -19,7 +19,7 @@ }; &qspi { - spi-flash@0 { + flash@0 { #address-cells = <1>; #size-cells = <1>; compatible = "spi-nand"; diff --git a/arch/arm/boot/dts/imx6ul-kontron-n6311-som.dtsi b/arch/arm/boot/dts/imx6ul-kontron-n6311-som.dtsi index a095a7654ac6..29ed38dce580 100644 --- a/arch/arm/boot/dts/imx6ul-kontron-n6311-som.dtsi +++ b/arch/arm/boot/dts/imx6ul-kontron-n6311-som.dtsi @@ -18,7 +18,7 @@ }; &qspi { - spi-flash@0 { + flash@0 { #address-cells = <1>; #size-cells = <1>; compatible = "spi-nand"; diff --git a/arch/arm/boot/dts/imx6ul-kontron-n6x1x-s.dtsi b/arch/arm/boot/dts/imx6ul-kontron-n6x1x-s.dtsi index 770f59b23102..a6cf0f21c66d 100644 --- a/arch/arm/boot/dts/imx6ul-kontron-n6x1x-s.dtsi +++ b/arch/arm/boot/dts/imx6ul-kontron-n6x1x-s.dtsi @@ -178,7 +178,7 @@ &uart3 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_uart3>; - fsl,uart-has-rtscts; + uart-has-rtscts; status = "okay"; }; diff --git a/arch/arm/boot/dts/imx6ul-kontron-n6x1x-som-common.dtsi b/arch/arm/boot/dts/imx6ul-kontron-n6x1x-som-common.dtsi index 2a449a3c1ae2..09a83dbdf651 100644 --- a/arch/arm/boot/dts/imx6ul-kontron-n6x1x-som-common.dtsi +++ b/arch/arm/boot/dts/imx6ul-kontron-n6x1x-som-common.dtsi @@ -19,7 +19,7 @@ pinctrl-0 = <&pinctrl_ecspi2>; status = "okay"; - spi-flash@0 { + flash@0 { compatible = "mxicy,mx25v8035f", "jedec,spi-nor"; spi-max-frequency = <50000000>; reg = <0>; diff --git a/arch/arm/boot/dts/imx6ul-phytec-segin-peb-av-02.dtsi b/arch/arm/boot/dts/imx6ul-phytec-segin-peb-av-02.dtsi index 205e4d462702..ec042648bd98 100644 --- a/arch/arm/boot/dts/imx6ul-phytec-segin-peb-av-02.dtsi +++ b/arch/arm/boot/dts/imx6ul-phytec-segin-peb-av-02.dtsi @@ -11,7 +11,7 @@ brightness-levels = <0 4 8 16 32 64 128 255>; default-brightness-level = <5>; power-supply = <®_backlight_en>; - pwms = <&pwm3 0 5000000>; + pwms = <&pwm3 0 5000000 0>; status = "disabled"; }; @@ -91,7 +91,6 @@ }; &pwm3 { - #pwm-cells = <2>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_pwm3>; status = "disabled"; diff --git a/arch/arm/boot/dts/imx6ul-tqma6ul-common.dtsi b/arch/arm/boot/dts/imx6ul-tqma6ul-common.dtsi new file mode 100644 index 000000000000..eca94ed6451b --- /dev/null +++ b/arch/arm/boot/dts/imx6ul-tqma6ul-common.dtsi @@ -0,0 +1,211 @@ +// SPDX-License-Identifier: (GPL-2.0-or-later OR MIT) +/* + * Copyright 2018-2022 TQ-Systems GmbH + * Author: Markus Niebel <Markus.Niebel@tq-group.com> + */ + +/* + * Common for + * - TQMa6ULx + * - TQMa6ULxL + * - TQMa6ULLx + * - TQMa6ULLxL + */ + +/ { + memory@80000000 { + device_type = "memory"; + reg = <0x80000000 0x10000000>; + }; +}; + +&i2c4 { + clock-frequency = <100000>; + pinctrl-names = "default", "gpio"; + pinctrl-0 = <&pinctrl_i2c4>; + pinctrl-1 = <&pinctrl_i2c4_recovery>; + scl-gpios = <&gpio1 20 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; + sda-gpios = <&gpio1 21 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; + status = "okay"; + + pfuze3000: pmic@8 { + compatible = "fsl,pfuze3000"; + reg = <0x08>; + + regulators { + reg_sw1a: sw1a { + regulator-min-microvolt = <700000>; + regulator-max-microvolt = <3300000>; + regulator-boot-on; + regulator-ramp-delay = <6250>; + /* not used */ + }; + + reg_sw1b_core: sw1b { + regulator-min-microvolt = <700000>; + regulator-max-microvolt = <1475000>; + regulator-boot-on; + regulator-always-on; + regulator-ramp-delay = <6250>; + }; + + reg_sw2: sw2 { + regulator-min-microvolt = <2500000>; + regulator-max-microvolt = <3300000>; + }; + + reg_sw3_ddr: sw3 { + regulator-min-microvolt = <900000>; + regulator-max-microvolt = <1650000>; + regulator-boot-on; + regulator-always-on; + }; + + reg_swbst: swbst { + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5150000>; + /* not used */ + }; + + reg_snvs_3v0: vsnvs { + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <3000000>; + regulator-boot-on; + regulator-always-on; + }; + + reg_vrefddr: vrefddr { + regulator-boot-on; + regulator-always-on; + }; + + reg_vccsd: vccsd { + regulator-min-microvolt = <2850000>; + regulator-max-microvolt = <3300000>; + }; + + reg_v33_3v3: v33 { + regulator-min-microvolt = <2850000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + + reg_vldo1_3v3: vldo1 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + /* not used */ + }; + + reg_vldo2: vldo2 { + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <1550000>; + /* not used */ + }; + + reg_vldo3: vldo3 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + /* not used */ + }; + + reg_vldo4: vldo4 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + }; + }; + }; + + jc42_1a: eeprom-temperature-sensor@1a { + compatible = "nxp,se97", "jedec,jc-42.4-temp"; + reg = <0x1a>; + }; + + m24c64_50: eeprom@50 { + compatible = "atmel,24c64"; + reg = <0x50>; + pagesize = <32>; + }; + + m24c02_52: eeprom@52 { + compatible = "nxp,se97b", "atmel,24c02"; + reg = <0x52>; + pagesize = <16>; + read-only; + }; + + rtc0: rtc@68 { + compatible = "dallas,ds1339"; + reg = <0x68>; + }; +}; + +&gpio4 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pmic>; + + /* + * PMIC & temperature sensor IRQ + * Both do currently not use IRQ + * potentially dangerous if used on baseboard + */ + pmic-int-hog { + gpio-hog; + gpios = <24 0>; + input; + }; +}; + +&qspi { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_qspi>; + status = "okay"; + + flash0: flash@0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "jedec,spi-nor"; + spi-max-frequency = <33000000>; + spi-rx-bus-width = <4>; + spi-tx-bus-width = <1>; + reg = <0>; + }; +}; + +/* eMMC */ +&usdhc2 { + pinctrl-names = "default", "state_100mhz" , "state_200mhz"; + pinctrl-0 = <&pinctrl_usdhc2>; + pinctrl-1 = <&pinctrl_usdhc2_100mhz>; + pinctrl-2 = <&pinctrl_usdhc2_200mhz>; + + bus-width = <8>; + disable-wp; + non-removable; + no-sdio; + no-sd; + status = "okay"; +}; + +&iomuxc { + pinctrl_i2c4: i2c4grp { + fsl,pins = < + MX6UL_PAD_UART2_TX_DATA__I2C4_SCL 0x4001b8b0 + MX6UL_PAD_UART2_RX_DATA__I2C4_SDA 0x4001b8b0 + >; + }; + + pinctrl_i2c4_recovery: i2c4recoverygrp { + fsl,pins = < + MX6UL_PAD_UART2_TX_DATA__GPIO1_IO20 0x4001b8b0 + MX6UL_PAD_UART2_RX_DATA__GPIO1_IO21 0x4001b8b0 + >; + }; + + pinctrl_pmic: pmic { + fsl,pins = < + /* PMIC irq */ + MX6UL_PAD_CSI_DATA03__GPIO4_IO24 0x1b099 + >; + }; +}; diff --git a/arch/arm/boot/dts/imx6ul-tqma6ul1-mba6ulx.dts b/arch/arm/boot/dts/imx6ul-tqma6ul1-mba6ulx.dts new file mode 100644 index 000000000000..f2a5f17f312e --- /dev/null +++ b/arch/arm/boot/dts/imx6ul-tqma6ul1-mba6ulx.dts @@ -0,0 +1,55 @@ +// SPDX-License-Identifier: (GPL-2.0-or-later OR MIT) +/* + * Copyright 2018-2022 TQ-Systems GmbH + * Author: Markus Niebel <Markus.Niebel@tq-group.com> + */ + +/dts-v1/; + +#include "imx6ul-tqma6ul1.dtsi" +#include "mba6ulx.dtsi" + +/ { + model = "TQ-Systems TQMa6UL1 SoM on MBa6ULx board"; + compatible = "tq,imx6ul-tqma6ul1-mba6ulx", "tq,imx6ul-tqma6ul1", "fsl,imx6ul"; +}; + +/* + * Note: can2 and fec2 are enabled on mba6ulx level (for i.MX6ULG2 usage) + * and need to be disabled here again + */ +&can2 { + status = "disabled"; +}; + +&fec1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_enet1>, <&pinctrl_enet1_mdc>; + status = "okay"; + + mdio { + #address-cells = <1>; + #size-cells = <0>; + + ethphy0: ethernet-phy@0 { + compatible = "ethernet-phy-ieee802.3-c22"; + max-speed = <100>; + reg = <0>; + }; + }; +}; + +&fec2 { + /delete-property/ phy-handle; + /delete-node/ mdio; +}; + +&iomuxc { + pinctrl_enet1_mdc: enet1mdcgrp { + fsl,pins = < + /* mdio */ + MX6UL_PAD_GPIO1_IO07__ENET1_MDC 0x1b0b0 + MX6UL_PAD_GPIO1_IO06__ENET1_MDIO 0x1b0b0 + >; + }; +}; diff --git a/arch/arm/boot/dts/imx6ul-tqma6ul1.dtsi b/arch/arm/boot/dts/imx6ul-tqma6ul1.dtsi new file mode 100644 index 000000000000..24192d012ef7 --- /dev/null +++ b/arch/arm/boot/dts/imx6ul-tqma6ul1.dtsi @@ -0,0 +1,37 @@ +// SPDX-License-Identifier: (GPL-2.0-or-later OR MIT) +/* + * Copyright 2018-2022 TQ-Systems GmbH + * Author: Markus Niebel <Markus.Niebel@tq-group.com> + */ + +#include "imx6ul-tqma6ul2.dtsi" + +/ { + model = "TQ-Systems TQMa6UL1 SoM"; + compatible = "tq,imx6ul-tqma6ul1", "fsl,imx6ul"; +}; + +/* + * There are no module specific differences compared to TQMa6UL2, + * only external interfaces differ + */ + +/* + * Devices not available on i.MX6ULG1 and should not be enabled on + * mainboard level (again) + */ +&can2 { + status = "disabled"; +}; + +&csi { + status = "disabled"; +}; + +&fec2 { + status = "disabled"; +}; + +&lcdif { + status = "disabled"; +}; diff --git a/arch/arm/boot/dts/imx6ul-tqma6ul2-mba6ulx.dts b/arch/arm/boot/dts/imx6ul-tqma6ul2-mba6ulx.dts new file mode 100644 index 000000000000..0757df2b8f48 --- /dev/null +++ b/arch/arm/boot/dts/imx6ul-tqma6ul2-mba6ulx.dts @@ -0,0 +1,15 @@ +// SPDX-License-Identifier: (GPL-2.0-or-later OR MIT) +/* + * Copyright 2018-2022 TQ-Systems GmbH + * Author: Markus Niebel <Markus.Niebel@tq-group.com> + */ + +/dts-v1/; + +#include "imx6ul-tqma6ul2.dtsi" +#include "mba6ulx.dtsi" + +/ { + model = "TQ-Systems TQMa6ULx SoM on MBa6ULx board"; + compatible = "tq,imx6ul-tqma6ul2-mba6ulx", "tq,imx6ul-tqma6ul2", "fsl,imx6ul"; +}; diff --git a/arch/arm/boot/dts/imx6ul-tqma6ul2.dtsi b/arch/arm/boot/dts/imx6ul-tqma6ul2.dtsi new file mode 100644 index 000000000000..e2e95dd92263 --- /dev/null +++ b/arch/arm/boot/dts/imx6ul-tqma6ul2.dtsi @@ -0,0 +1,71 @@ +// SPDX-License-Identifier: (GPL-2.0-or-later OR MIT) +/* + * Copyright 2018-2022 TQ-Systems GmbH + * Author: Markus Niebel <Markus.Niebel@tq-group.com> + */ + +#include "imx6ul.dtsi" +#include "imx6ul-tqma6ul-common.dtsi" +#include "imx6ul-tqma6ulx-common.dtsi" + +/ { + model = "TQ-Systems TQMa6UL2 SoM"; + compatible = "tq,imx6ul-tqma6ul2", "fsl,imx6ul"; +}; + +&usdhc2 { + fsl,tuning-step = <6>; +}; + +&iomuxc { + pinctrl_usdhc2: usdhc2grp { + fsl,pins = < + MX6UL_PAD_NAND_RE_B__USDHC2_CLK 0x00017051 + MX6UL_PAD_NAND_WE_B__USDHC2_CMD 0x00017051 + MX6UL_PAD_NAND_DATA00__USDHC2_DATA0 0x00017051 + MX6UL_PAD_NAND_DATA01__USDHC2_DATA1 0x00017051 + MX6UL_PAD_NAND_DATA02__USDHC2_DATA2 0x00017051 + MX6UL_PAD_NAND_DATA03__USDHC2_DATA3 0x00017051 + MX6UL_PAD_NAND_DATA04__USDHC2_DATA4 0x00017051 + MX6UL_PAD_NAND_DATA05__USDHC2_DATA5 0x00017051 + MX6UL_PAD_NAND_DATA06__USDHC2_DATA6 0x00017051 + MX6UL_PAD_NAND_DATA07__USDHC2_DATA7 0x00017051 + /* rst */ + MX6UL_PAD_NAND_ALE__GPIO4_IO10 0x0001b051 + >; + }; + + pinctrl_usdhc2_100mhz: usdhc2-100mhzgrp { + fsl,pins = < + MX6UL_PAD_NAND_RE_B__USDHC2_CLK 0x000170e1 + MX6UL_PAD_NAND_WE_B__USDHC2_CMD 0x000170f1 + MX6UL_PAD_NAND_DATA00__USDHC2_DATA0 0x000170f1 + MX6UL_PAD_NAND_DATA01__USDHC2_DATA1 0x000170f1 + MX6UL_PAD_NAND_DATA02__USDHC2_DATA2 0x000170f1 + MX6UL_PAD_NAND_DATA03__USDHC2_DATA3 0x000170f1 + MX6UL_PAD_NAND_DATA04__USDHC2_DATA4 0x000170f1 + MX6UL_PAD_NAND_DATA05__USDHC2_DATA5 0x000170f1 + MX6UL_PAD_NAND_DATA06__USDHC2_DATA6 0x000170f1 + MX6UL_PAD_NAND_DATA07__USDHC2_DATA7 0x000170f1 + /* rst */ + MX6UL_PAD_NAND_ALE__GPIO4_IO10 0x0001b051 + >; + }; + + pinctrl_usdhc2_200mhz: usdhc2-200mhzgrp { + fsl,pins = < + MX6UL_PAD_NAND_RE_B__USDHC2_CLK 0x000170f1 + MX6UL_PAD_NAND_WE_B__USDHC2_CMD 0x000170e1 + MX6UL_PAD_NAND_DATA00__USDHC2_DATA0 0x000170e1 + MX6UL_PAD_NAND_DATA01__USDHC2_DATA1 0x000170e1 + MX6UL_PAD_NAND_DATA02__USDHC2_DATA2 0x000170e1 + MX6UL_PAD_NAND_DATA03__USDHC2_DATA3 0x000170e1 + MX6UL_PAD_NAND_DATA04__USDHC2_DATA4 0x000170e1 + MX6UL_PAD_NAND_DATA05__USDHC2_DATA5 0x000170e1 + MX6UL_PAD_NAND_DATA06__USDHC2_DATA6 0x000170e1 + MX6UL_PAD_NAND_DATA07__USDHC2_DATA7 0x000170e1 + /* rst */ + MX6UL_PAD_NAND_ALE__GPIO4_IO10 0x0001b051 + >; + }; +}; diff --git a/arch/arm/boot/dts/imx6ul-tqma6ul2l-mba6ulx.dts b/arch/arm/boot/dts/imx6ul-tqma6ul2l-mba6ulx.dts new file mode 100644 index 000000000000..9d9b6b744a1c --- /dev/null +++ b/arch/arm/boot/dts/imx6ul-tqma6ul2l-mba6ulx.dts @@ -0,0 +1,15 @@ +// SPDX-License-Identifier: (GPL-2.0-or-later OR MIT) +/* + * Copyright 2018-2022 TQ Systems GmbH + * Author: Markus Niebel <Markus.Niebel@tq-group.com> + */ + +/dts-v1/; + +#include "imx6ul-tqma6ul2l.dtsi" +#include "mba6ulx.dtsi" + +/ { + model = "TQ Systems TQMa6UL2L SoM on MBa6ULx board"; + compatible = "tq,imx6ul-tqma6ul2l-mba6ulx", "tq,imx6ul-tqma6ul2l", "fsl,imx6ul"; +}; diff --git a/arch/arm/boot/dts/imx6ul-tqma6ul2l.dtsi b/arch/arm/boot/dts/imx6ul-tqma6ul2l.dtsi new file mode 100644 index 000000000000..caf2c5d03f7e --- /dev/null +++ b/arch/arm/boot/dts/imx6ul-tqma6ul2l.dtsi @@ -0,0 +1,71 @@ +// SPDX-License-Identifier: (GPL-2.0-or-later OR MIT) +/* + * Copyright 2018-2022 TQ-Systems GmbH + * Author: Markus Niebel <Markus.Niebel@tq-group.com> + */ + +#include "imx6ul.dtsi" +#include "imx6ul-tqma6ul-common.dtsi" +#include "imx6ul-tqma6ulxl-common.dtsi" + +/ { + model = "TQ-Systems TQMa6UL2L SoM"; + compatible = "tq,imx6ul-tqma6ul2l", "fsl,imx6ul"; +}; + +&usdhc2 { + fsl,tuning-step= <6>; +}; + +&iomuxc { + pinctrl_usdhc2: usdhc2grp { + fsl,pins = < + MX6UL_PAD_NAND_RE_B__USDHC2_CLK 0x00017051 + MX6UL_PAD_NAND_WE_B__USDHC2_CMD 0x00017051 + MX6UL_PAD_NAND_DATA00__USDHC2_DATA0 0x00017051 + MX6UL_PAD_NAND_DATA01__USDHC2_DATA1 0x00017051 + MX6UL_PAD_NAND_DATA02__USDHC2_DATA2 0x00017051 + MX6UL_PAD_NAND_DATA03__USDHC2_DATA3 0x00017051 + MX6UL_PAD_NAND_DATA04__USDHC2_DATA4 0x00017051 + MX6UL_PAD_NAND_DATA05__USDHC2_DATA5 0x00017051 + MX6UL_PAD_NAND_DATA06__USDHC2_DATA6 0x00017051 + MX6UL_PAD_NAND_DATA07__USDHC2_DATA7 0x00017051 + /* rst */ + MX6UL_PAD_NAND_ALE__GPIO4_IO10 0x0001b051 + >; + }; + + pinctrl_usdhc2_100mhz: usdhc2-100mhzgrp { + fsl,pins = < + MX6UL_PAD_NAND_RE_B__USDHC2_CLK 0x000170e1 + MX6UL_PAD_NAND_WE_B__USDHC2_CMD 0x000170f1 + MX6UL_PAD_NAND_DATA00__USDHC2_DATA0 0x000170f1 + MX6UL_PAD_NAND_DATA01__USDHC2_DATA1 0x000170f1 + MX6UL_PAD_NAND_DATA02__USDHC2_DATA2 0x000170f1 + MX6UL_PAD_NAND_DATA03__USDHC2_DATA3 0x000170f1 + MX6UL_PAD_NAND_DATA04__USDHC2_DATA4 0x000170f1 + MX6UL_PAD_NAND_DATA05__USDHC2_DATA5 0x000170f1 + MX6UL_PAD_NAND_DATA06__USDHC2_DATA6 0x000170f1 + MX6UL_PAD_NAND_DATA07__USDHC2_DATA7 0x000170f1 + /* rst */ + MX6UL_PAD_NAND_ALE__GPIO4_IO10 0x0001b051 + >; + }; + + pinctrl_usdhc2_200mhz: usdhc2-200mhzgrp { + fsl,pins = < + MX6UL_PAD_NAND_RE_B__USDHC2_CLK 0x000170f9 + MX6UL_PAD_NAND_WE_B__USDHC2_CMD 0x000170f1 + MX6UL_PAD_NAND_DATA00__USDHC2_DATA0 0x000170f1 + MX6UL_PAD_NAND_DATA01__USDHC2_DATA1 0x000170f1 + MX6UL_PAD_NAND_DATA02__USDHC2_DATA2 0x000170f1 + MX6UL_PAD_NAND_DATA03__USDHC2_DATA3 0x000170f1 + MX6UL_PAD_NAND_DATA04__USDHC2_DATA4 0x000170f1 + MX6UL_PAD_NAND_DATA05__USDHC2_DATA5 0x000170f1 + MX6UL_PAD_NAND_DATA06__USDHC2_DATA6 0x000170f1 + MX6UL_PAD_NAND_DATA07__USDHC2_DATA7 0x000170f1 + /* rst */ + MX6UL_PAD_NAND_ALE__GPIO4_IO10 0x0001b051 + >; + }; +}; diff --git a/arch/arm/boot/dts/imx6ul-tqma6ulx-common.dtsi b/arch/arm/boot/dts/imx6ul-tqma6ulx-common.dtsi new file mode 100644 index 000000000000..5afb9046c202 --- /dev/null +++ b/arch/arm/boot/dts/imx6ul-tqma6ulx-common.dtsi @@ -0,0 +1,43 @@ +// SPDX-License-Identifier: (GPL-2.0-or-later OR MIT) +/* + * Copyright 2018-2022 TQ-Systems GmbH + * Author: Markus Niebel <Markus.Niebel@tq-group.com> + */ + +/* + * Common for + * - TQMa6ULx + * - TQMa6ULLx + */ + +&m24c64_50 { + vcc-supply = <®_sw2>; +}; + +&m24c02_52 { + vcc-supply = <®_sw2>; +}; + +®_sw2 { + regulator-boot-on; + regulator-always-on; +}; + +/* eMMC */ +&usdhc2 { + vmmc-supply = <®_sw2>; + vqmmc-supply = <®_vldo4>; +}; + +&iomuxc { + pinctrl_qspi: qspigrp { + fsl,pins = < + MX6UL_PAD_NAND_WP_B__QSPI_A_SCLK 0x70b9 + MX6UL_PAD_NAND_READY_B__QSPI_A_DATA00 0x70b9 + MX6UL_PAD_NAND_CE0_B__QSPI_A_DATA01 0x70b9 + MX6UL_PAD_NAND_CE1_B__QSPI_A_DATA02 0x70b9 + MX6UL_PAD_NAND_CLE__QSPI_A_DATA03 0x70b9 + MX6UL_PAD_NAND_DQS__QSPI_A_SS0_B 0x70a1 + >; + }; +}; diff --git a/arch/arm/boot/dts/imx6ul-tqma6ulxl-common.dtsi b/arch/arm/boot/dts/imx6ul-tqma6ulxl-common.dtsi new file mode 100644 index 000000000000..ba84a4f70ebd --- /dev/null +++ b/arch/arm/boot/dts/imx6ul-tqma6ulxl-common.dtsi @@ -0,0 +1,48 @@ +// SPDX-License-Identifier: (GPL-2.0-or-later OR MIT) +/* + * Copyright 2018-2022 TQ-Systems GmbH + * Author: Markus Niebel <Markus.Niebel@tq-group.com> + */ + +/* + * Common for + * - TQMa6ULxL + * - TQMa6ULLxL + */ + +/ { + reg_vin: reg-vin { + compatible = "regulator-fixed"; + regulator-name = "VIN"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; +}; + +&m24c64_50 { + vcc-supply = <®_vin>; +}; + +&m24c02_52 { + vcc-supply = <®_vin>; +}; + +/* eMMC */ +&usdhc2 { + vmmc-supply = <®_vin>; + vqmmc-supply = <®_vldo4>; +}; + +&iomuxc { + pinctrl_qspi: qspigrp { + fsl,pins = < + MX6UL_PAD_NAND_WP_B__QSPI_A_SCLK 0x70a9 + MX6UL_PAD_NAND_READY_B__QSPI_A_DATA00 0x70a9 + MX6UL_PAD_NAND_CE0_B__QSPI_A_DATA01 0x70a9 + MX6UL_PAD_NAND_CE1_B__QSPI_A_DATA02 0x70a9 + MX6UL_PAD_NAND_CLE__QSPI_A_DATA03 0x70a9 + MX6UL_PAD_NAND_DQS__QSPI_A_SS0_B 0x70a1 + >; + }; +}; diff --git a/arch/arm/boot/dts/imx6ull-colibri-aster.dts b/arch/arm/boot/dts/imx6ull-colibri-aster.dts new file mode 100644 index 000000000000..d3f2fb7c6c1e --- /dev/null +++ b/arch/arm/boot/dts/imx6ull-colibri-aster.dts @@ -0,0 +1,20 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT +/* + * Copyright 2017-2022 Toradex + */ + +/dts-v1/; + +#include "imx6ull-colibri-nonwifi.dtsi" +#include "imx6ull-colibri-aster.dtsi" + +/ { + model = "Toradex Colibri iMX6ULL 256/512MB on Colibri Aster"; + compatible = "toradex,colibri-imx6ull-aster", + "toradex,colibri-imx6ull", + "fsl,imx6ull"; +}; + +&atmel_mxt_ts { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/imx6ull-colibri-aster.dtsi b/arch/arm/boot/dts/imx6ull-colibri-aster.dtsi new file mode 100644 index 000000000000..c9133ba2d705 --- /dev/null +++ b/arch/arm/boot/dts/imx6ull-colibri-aster.dtsi @@ -0,0 +1,145 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT +/* + * Copyright 2017-2022 Toradex + */ + +/ { + chosen { + stdout-path = "serial0:115200n8"; + }; + + gpio-keys { + compatible = "gpio-keys"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_snvs_gpiokeys>; + + power { + label = "Wake-Up"; + gpios = <&gpio5 1 GPIO_ACTIVE_HIGH>; + linux,code = <KEY_WAKEUP>; + debounce-interval = <10>; + wakeup-source; + }; + }; + + reg_3v3: regulator-3v3 { + compatible = "regulator-fixed"; + regulator-name = "3.3V"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; + + reg_5v0: regulator-5v0 { + compatible = "regulator-fixed"; + regulator-name = "5V"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + }; + + reg_usbh_vbus: regulator-usbh-vbus { + compatible = "regulator-fixed"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usbh_reg>; + regulator-name = "VCC_USB[1-4]"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + gpio = <&gpio1 2 GPIO_ACTIVE_LOW>; + vin-supply = <®_5v0>; + }; +}; + +&adc1 { + status = "okay"; +}; + +&ecspi1 { + status = "okay"; + + num-cs = <2>; + cs-gpios = < + &gpio3 26 GPIO_ACTIVE_HIGH /* SODIMM 86 LCD_DATA21 */ + &gpio4 28 GPIO_ACTIVE_HIGH /* SODIMM 65 CSI_DATA07 */ + >; +}; + +/* + * Following SODIMM Pins should not be accessed as GPIO on Aster board: + * 134 - AIN5_SCL (no connection) + * 127 - Voltage Level Translator OE# signal (IC11 and IC12) + * + * To configure GPIO to LED5, please disable FEC2 and uncomment the following: + * &iomuxc { + * pinctrl-names = "default"; + * pinctrl-0 = < + * &pinctrl_gpio1 + * &pinctrl_gpio2 + * &pinctrl_gpio3 + * &pinctrl_gpio4 + * &pinctrl_gpio6 - for non-WiFi modules only + * &pinctrl_gpio7 + * &pinctrl_gpio_aster + * >; + * + * pinctrl_gpio_aster: gpio-aster { + * fsl,pins = < + * MX6UL_PAD_GPIO1_IO07__GPIO1_IO07 0x1b0b0 + * >; + * }; + * }; + */ + +&i2c1 { + status = "okay"; + + m41t0m6: rtc@68 { + compatible = "st,m41t0"; + reg = <0x68>; + }; +}; + +/* PWM <A> */ +&pwm4 { + status = "okay"; +}; + +/* PWM <B> */ +&pwm5 { + status = "okay"; +}; + +/* PWM <C> */ +&pwm6 { + status = "okay"; +}; + +/* PWM <D> */ +&pwm7 { + status = "okay"; +}; + +&uart1 { + status = "okay"; +}; + +&uart2 { + status = "okay"; +}; + +&uart5 { + status = "okay"; +}; + +&usbotg1 { + vbus-supply = <®_usbh_vbus>; + status = "okay"; +}; + +&usbotg2 { + vbus-supply = <®_usbh_vbus>; + status = "okay"; +}; + +&usdhc1 { + vmmc-supply = <®_3v3>; + status = "okay"; +}; diff --git a/arch/arm/boot/dts/imx6ull-colibri-emmc-aster.dts b/arch/arm/boot/dts/imx6ull-colibri-emmc-aster.dts new file mode 100644 index 000000000000..919c0464d6cb --- /dev/null +++ b/arch/arm/boot/dts/imx6ull-colibri-emmc-aster.dts @@ -0,0 +1,17 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT +/* + * Copyright 2022 Toradex + */ + +/dts-v1/; + +#include "imx6ull-colibri-emmc-nonwifi.dtsi" +#include "imx6ull-colibri-aster.dtsi" + +/ { + model = "Toradex Colibri iMX6ULL 1GB (eMMC) on Colibri Aster"; + compatible = "toradex,colibri-imx6ull-emmc-aster", + "toradex,colibri-imx6ull-emmc", + "toradex,colibri-imx6ull", + "fsl,imx6ull"; +}; diff --git a/arch/arm/boot/dts/imx6ull-colibri-emmc-iris-v2.dts b/arch/arm/boot/dts/imx6ull-colibri-emmc-iris-v2.dts new file mode 100644 index 000000000000..b9060c2f7977 --- /dev/null +++ b/arch/arm/boot/dts/imx6ull-colibri-emmc-iris-v2.dts @@ -0,0 +1,17 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT +/* + * Copyright 2022 Toradex + */ + +/dts-v1/; + +#include "imx6ull-colibri-emmc-nonwifi.dtsi" +#include "imx6ull-colibri-iris-v2.dtsi" + +/ { + model = "Toradex Colibri iMX6ULL 1G (eMMC) on Colibri Iris V2"; + compatible = "toradex,colibri-imx6ull-iris-v2", + "toradex,colibri-imx6ull-emmc", + "toradex,colibri-imx6ull", + "fsl,imx6ull"; +}; diff --git a/arch/arm/boot/dts/imx6ull-colibri-emmc-iris.dts b/arch/arm/boot/dts/imx6ull-colibri-emmc-iris.dts new file mode 100644 index 000000000000..0ab71f2f5daa --- /dev/null +++ b/arch/arm/boot/dts/imx6ull-colibri-emmc-iris.dts @@ -0,0 +1,17 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT +/* + * Copyright 2022 Toradex + */ + +/dts-v1/; + +#include "imx6ull-colibri-emmc-nonwifi.dtsi" +#include "imx6ull-colibri-iris.dtsi" + +/ { + model = "Toradex Colibri iMX6ULL 1GB (eMMC) on Colibri Iris"; + compatible = "toradex,colibri-imx6ull-emmc-iris", + "toradex,colibri-imx6ull-emmc", + "toradex,colibri-imx6ull", + "fsl,imx6ull"; +}; diff --git a/arch/arm/boot/dts/imx6ull-colibri-emmc-nonwifi.dtsi b/arch/arm/boot/dts/imx6ull-colibri-emmc-nonwifi.dtsi index a099abfdfa27..ea238525d5c0 100644 --- a/arch/arm/boot/dts/imx6ull-colibri-emmc-nonwifi.dtsi +++ b/arch/arm/boot/dts/imx6ull-colibri-emmc-nonwifi.dtsi @@ -1,6 +1,6 @@ -// SPDX-License-Identifier: GPL-2.0+ OR MIT +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT /* - * Copyright 2021 Toradex + * Copyright 2022 Toradex */ #include "imx6ull-colibri.dtsi" @@ -8,7 +8,7 @@ / { aliases { mmc0 = &usdhc2; /* eMMC */ - mmc1 = &usdhc1; /* MMC 4bit slot */ + mmc1 = &usdhc1; /* MMC 4-bit slot */ }; memory@80000000 { @@ -154,6 +154,7 @@ "SODIMM_127"; }; +/* NAND */ &gpmi { status = "disabled"; }; @@ -170,6 +171,7 @@ pinctrl-0 = <&pinctrl_snvs_gpio1 &pinctrl_snvs_gpio3>; }; +/* eMMC */ &usdhc2 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_usdhc2emmc>; diff --git a/arch/arm/boot/dts/imx6ull-colibri-eval-v3.dts b/arch/arm/boot/dts/imx6ull-colibri-eval-v3.dts index 08669a18349e..9bf7111d7b00 100644 --- a/arch/arm/boot/dts/imx6ull-colibri-eval-v3.dts +++ b/arch/arm/boot/dts/imx6ull-colibri-eval-v3.dts @@ -1,6 +1,6 @@ -// SPDX-License-Identifier: (GPL-2.0 OR MIT) +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT /* - * Copyright 2018 Toradex AG + * Copyright 2018-2022 Toradex */ /dts-v1/; @@ -9,6 +9,6 @@ #include "imx6ull-colibri-eval-v3.dtsi" / { - model = "Toradex Colibri iMX6ULL 256MB on Colibri Evaluation Board V3"; + model = "Toradex Colibri iMX6ULL 256/512MB on Colibri Evaluation Board V3"; compatible = "toradex,colibri-imx6ull-eval", "fsl,imx6ull"; }; diff --git a/arch/arm/boot/dts/imx6ull-colibri-eval-v3.dtsi b/arch/arm/boot/dts/imx6ull-colibri-eval-v3.dtsi index a78849fd2afa..e29907428c20 100644 --- a/arch/arm/boot/dts/imx6ull-colibri-eval-v3.dtsi +++ b/arch/arm/boot/dts/imx6ull-colibri-eval-v3.dtsi @@ -1,6 +1,6 @@ -// SPDX-License-Identifier: (GPL-2.0 OR MIT) +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT /* - * Copyright 2017 Toradex AG + * Copyright 2017-2022 Toradex */ / { @@ -8,20 +8,6 @@ stdout-path = "serial0:115200n8"; }; - gpio-keys { - compatible = "gpio-keys"; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_snvs_gpiokeys>; - - power { - label = "Wake-Up"; - gpios = <&gpio5 1 GPIO_ACTIVE_HIGH>; - linux,code = <KEY_WAKEUP>; - debounce-interval = <10>; - wakeup-source; - }; - }; - /* fixed crystal dedicated to mcp2515 */ clk16m: clk16m { compatible = "fixed-clock"; @@ -29,18 +15,6 @@ clock-frequency = <16000000>; }; - panel: panel { - compatible = "edt,et057090dhu"; - backlight = <&bl>; - power-supply = <®_3v3>; - - port { - panel_in: endpoint { - remote-endpoint = <&lcdif_out>; - }; - }; - }; - reg_3v3: regulator-3v3 { compatible = "regulator-fixed"; regulator-name = "3.3V"; @@ -71,14 +45,6 @@ status = "okay"; }; -&bl { - brightness-levels = <0 4 8 16 32 64 128 255>; - default-brightness-level = <6>; - power-supply = <®_3v3>; - pwms = <&pwm4 0 5000000 1>; - status = "okay"; -}; - &ecspi1 { status = "okay"; @@ -107,16 +73,6 @@ }; }; -&lcdif { - status = "okay"; - - port { - lcdif_out: endpoint { - remote-endpoint = <&panel_in>; - }; - }; -}; - /* PWM <A> */ &pwm4 { status = "okay"; @@ -150,6 +106,7 @@ }; &usbotg1 { + vbus-supply = <®_usbh_vbus>; status = "okay"; }; @@ -159,20 +116,6 @@ }; &usdhc1 { - pinctrl-names = "default", "state_100mhz", "state_200mhz", "sleep"; - pinctrl-0 = <&pinctrl_usdhc1 &pinctrl_snvs_usdhc1_cd>; - pinctrl-1 = <&pinctrl_usdhc1_100mhz &pinctrl_snvs_usdhc1_cd>; - pinctrl-2 = <&pinctrl_usdhc1_200mhz &pinctrl_snvs_usdhc1_cd>; - pinctrl-3 = <&pinctrl_usdhc1 &pinctrl_snvs_usdhc1_sleep_cd>; - cd-gpios = <&gpio5 0 GPIO_ACTIVE_LOW>; - disable-wp; - wakeup-source; - keep-power-in-suspend; vmmc-supply = <®_3v3>; - vqmmc-supply = <®_sd1_vmmc>; - sd-uhs-sdr12; - sd-uhs-sdr25; - sd-uhs-sdr50; - sd-uhs-sdr104; status = "okay"; }; diff --git a/arch/arm/boot/dts/imx6ull-colibri-iris-v2.dts b/arch/arm/boot/dts/imx6ull-colibri-iris-v2.dts new file mode 100644 index 000000000000..afc1e0119783 --- /dev/null +++ b/arch/arm/boot/dts/imx6ull-colibri-iris-v2.dts @@ -0,0 +1,65 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT +/* + * Copyright 2018-2022 Toradex + */ + +/dts-v1/; + +#include "imx6ull-colibri-nonwifi.dtsi" +#include "imx6ull-colibri-iris-v2.dtsi" + +/ { + model = "Toradex Colibri iMX6ULL 256M/512B on Colibri Iris V2"; + compatible = "toradex,colibri-imx6ull-iris-v2", + "toradex,colibri-imx6ull", + "fsl,imx6ull"; +}; + +&atmel_mxt_ts { + status = "okay"; +}; + +&gpio1 { + /* This turns the LVDS transceiver on */ + lvds-power-on { + gpio-hog; + gpios = <14 GPIO_ACTIVE_HIGH>; /* SODIMM 99 */ + line-name = "LVDS_POWER_ON"; + output-high; + }; +}; + +&gpio2 { + /* + * This switches the LVDS transceiver to the single-channel + * output mode. + */ + lvds-ch-mode { + gpio-hog; + gpios = <0 GPIO_ACTIVE_HIGH>; /* SODIMM 55 */ + line-name = "LVDS_CH_MODE"; + output-high; + }; + + /* + * This switches the LVDS transceiver to the 24-bit RGB mode. + */ + lvds-rgb-mode { + gpio-hog; + gpios = <1 GPIO_ACTIVE_HIGH>; /* SODIMM 63 */ + line-name = "LVDS_RGB_MODE"; + output-low; + }; +}; + +&gpio5 { + /* + * This switches the LVDS transceiver to VESA color mapping mode. + */ + lvds-color-map { + gpio-hog; + gpios = <3 GPIO_ACTIVE_HIGH>; /* SODIMM 95 */ + line-name = "LVDS_COLOR_MAP"; + output-low; + }; +}; diff --git a/arch/arm/boot/dts/imx6ull-colibri-iris-v2.dtsi b/arch/arm/boot/dts/imx6ull-colibri-iris-v2.dtsi new file mode 100644 index 000000000000..93649cad0cc0 --- /dev/null +++ b/arch/arm/boot/dts/imx6ull-colibri-iris-v2.dtsi @@ -0,0 +1,27 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT +/* + * Copyright 2018-2022 Toradex + */ + +#include "imx6ull-colibri-iris.dtsi" + +/ { + reg_3v3_vmmc: regulator-3v3-vmmc { + compatible = "regulator-fixed"; + regulator-name = "3v3_vmmc"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + gpio = <&gpio1 26 GPIO_ACTIVE_HIGH>; + startup-delay-us = <100>; + enable-active-high; + }; +}; + + +&usdhc1 { + cap-power-off-card; + vmmc-supply = <®_3v3_vmmc>; + /delete-property/ keep-power-in-suspend; + /delete-property/ no-1-8-v; + status = "okay"; +}; diff --git a/arch/arm/boot/dts/imx6ull-colibri-iris.dts b/arch/arm/boot/dts/imx6ull-colibri-iris.dts new file mode 100644 index 000000000000..4fb97b0fe30b --- /dev/null +++ b/arch/arm/boot/dts/imx6ull-colibri-iris.dts @@ -0,0 +1,20 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT +/* + * Copyright 2018-2022 Toradex + */ + +/dts-v1/; + +#include "imx6ull-colibri-nonwifi.dtsi" +#include "imx6ull-colibri-iris.dtsi" + +/ { + model = "Toradex Colibri iMX6ULL 256/512MB on Colibri Iris"; + compatible = "toradex,colibri-imx6ull-iris", + "toradex,colibri-imx6ull", + "fsl,imx6ull"; +}; + +&atmel_mxt_ts { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/imx6ull-colibri-iris.dtsi b/arch/arm/boot/dts/imx6ull-colibri-iris.dtsi new file mode 100644 index 000000000000..7f3b37baba88 --- /dev/null +++ b/arch/arm/boot/dts/imx6ull-colibri-iris.dtsi @@ -0,0 +1,132 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT +/* + * Copyright 2018-2022 Toradex + */ + +/ { + chosen { + stdout-path = "serial0:115200n8"; + }; + + gpio-keys { + compatible = "gpio-keys"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_snvs_gpiokeys>; + + power { + label = "Wake-Up"; + gpios = <&gpio5 1 GPIO_ACTIVE_HIGH>; + linux,code = <KEY_WAKEUP>; + debounce-interval = <10>; + wakeup-source; + }; + }; + + reg_3v3: regulator-3v3 { + compatible = "regulator-fixed"; + regulator-name = "3.3V"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; + + reg_5v0: regulator-5v0 { + compatible = "regulator-fixed"; + regulator-name = "5V"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + }; + + reg_usbh_vbus: regulator-usbh-vbus { + compatible = "regulator-fixed"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usbh_reg>; + regulator-name = "VCC_USB[1-4]"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + gpio = <&gpio1 2 GPIO_ACTIVE_LOW>; + vin-supply = <®_5v0>; + }; +}; + +&adc1 { + status = "okay"; +}; + +&gpio1 { + /* + * uart25_tx_on turns the UART transceiver on. If one wants to turn the + * transceiver off, that property has to be deleted and the gpio handled + * in userspace. + * The same applies to uart1_tx_on. + */ + uart25_tx_on { + gpio-hog; + gpios = <15 0>; + output-high; + }; +}; + +&gpio2 { + uart1_tx_on { + gpio-hog; + gpios = <7 0>; + output-high; + }; +}; + +&i2c1 { + status = "okay"; + + /* M41T0M6 real time clock on carrier board */ + m41t0m6: rtc@68 { + compatible = "st,m41t0"; + reg = <0x68>; + }; +}; + +/* PWM <A> */ +&pwm4 { + status = "okay"; +}; + +/* PWM <B> */ +&pwm5 { + status = "okay"; +}; + +/* PWM <C> */ +&pwm6 { + status = "okay"; +}; + +/* PWM <D> */ +&pwm7 { + status = "okay"; +}; + +&uart1 { + status = "okay"; +}; + +&uart2 { + status = "okay"; +}; + +&uart5 { + status = "okay"; +}; + +&usbotg1 { + vbus-supply = <®_usbh_vbus>; + status = "okay"; +}; + +&usbotg2 { + vbus-supply = <®_usbh_vbus>; + status = "okay"; +}; + +&usdhc1 { + vmmc-supply = <®_3v3>; + status = "okay"; +}; diff --git a/arch/arm/boot/dts/imx6ull-colibri-nonwifi.dtsi b/arch/arm/boot/dts/imx6ull-colibri-nonwifi.dtsi index 95a11b8bcbdb..88901db255d6 100644 --- a/arch/arm/boot/dts/imx6ull-colibri-nonwifi.dtsi +++ b/arch/arm/boot/dts/imx6ull-colibri-nonwifi.dtsi @@ -1,6 +1,6 @@ -// SPDX-License-Identifier: (GPL-2.0 OR MIT) +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT /* - * Copyright 2018 Toradex AG + * Copyright 2018-2022 Toradex */ #include "imx6ull-colibri.dtsi" @@ -12,13 +12,150 @@ }; }; +&gpio1 { + gpio-line-names = "SODIMM_8", + "SODIMM_6", + "SODIMM_129", + "SODIMM_89", + "SODIMM_19", + "SODIMM_21", + "UNUSABLE_SODIMM_180", + "UNUSABLE_SODIMM_184", + "SODIMM_4", + "SODIMM_2", + "SODIMM_106", + "SODIMM_71", + "SODIMM_23", + "SODIMM_31", + "SODIMM_99", + "SODIMM_102", + "SODIMM_33", + "SODIMM_35", + "SODIMM_25", + "SODIMM_27", + "SODIMM_36", + "SODIMM_38", + "SODIMM_32", + "SODIMM_34", + "SODIMM_135", + "SODIMM_77", + "SODIMM_100", + "SODIMM_186", + "SODIMM_196", + "SODIMM_194"; +}; + +&gpio2 { + gpio-line-names = "SODIMM_55", + "SODIMM_63", + "SODIMM_178", + "SODIMM_188", + "SODIMM_73", + "SODIMM_30", + "SODIMM_67", + "SODIMM_104", + "", + "", + "", + "", + "", + "", + "", + "", + "SODIMM_190", + "SODIMM_47", + "SODIMM_192", + "SODIMM_49", + "SODIMM_51", + "SODIMM_53"; +}; + +&gpio3 { + gpio-line-names = "SODIMM_56", + "SODIMM_44", + "SODIMM_68", + "SODIMM_82", + "", + "SODIMM_76", + "SODIMM_70", + "SODIMM_60", + "SODIMM_58", + "SODIMM_78", + "SODIMM_72", + "SODIMM_80", + "SODIMM_46", + "SODIMM_62", + "SODIMM_48", + "SODIMM_74", + "SODIMM_50", + "SODIMM_52", + "SODIMM_54", + "SODIMM_66", + "SODIMM_64", + "SODIMM_57", + "SODIMM_61", + "SODIMM_29", + "SODIMM_37", + "SODIMM_88", + "SODIMM_86", + "SODIMM_92", + "SODIMM_90"; +}; + +&gpio4 { + gpio-line-names = "", + "", + "", + "", + "", + "", + "", + "", + "", + "", + "", + "SODIMM_59", + "", + "", + "SODIMM_133", + "", + "SODIMM_28", + "SODIMM_75", + "SODIMM_96", + "SODIMM_81", + "SODIMM_94", + "SODIMM_101", + "SODIMM_103", + "SODIMM_79", + "SODIMM_97", + "SODIMM_69", + "SODIMM_98", + "SODIMM_85", + "SODIMM_65"; +}; + +&gpio5 { + gpio-line-names = "SODIMM_43", + "SODIMM_45", + "SODIMM_137", + "SODIMM_95", + "SODIMM_107", + "SODIMM_131", + "SODIMM_93", + "", + "SODIMM_138", + "", + "SODIMM_105", + "SODIMM_127"; +}; + &iomuxc { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_gpio1 &pinctrl_gpio2 &pinctrl_gpio3 - &pinctrl_gpio4 &pinctrl_gpio5 &pinctrl_gpio6 &pinctrl_gpio7>; + &pinctrl_gpio4 &pinctrl_gpio6 &pinctrl_gpio7>; }; &iomuxc_snvs { pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_snvs_gpio1 &pinctrl_snvs_gpio2 &pinctrl_snvs_gpio3>; + pinctrl-0 = <&pinctrl_snvs_gpio1 &pinctrl_snvs_gpio3>; }; diff --git a/arch/arm/boot/dts/imx6ull-colibri-wifi-aster.dts b/arch/arm/boot/dts/imx6ull-colibri-wifi-aster.dts new file mode 100644 index 000000000000..b4f65e8c5857 --- /dev/null +++ b/arch/arm/boot/dts/imx6ull-colibri-wifi-aster.dts @@ -0,0 +1,20 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT +/* + * Copyright 2017-2022 Toradex + */ + +/dts-v1/; + +#include "imx6ull-colibri-wifi.dtsi" +#include "imx6ull-colibri-aster.dtsi" + +/ { + model = "Toradex Colibri iMX6ULL 512MB on Colibri Aster"; + compatible = "toradex,colibri-imx6ull-wifi-aster", + "toradex,colibri-imx6ull", + "fsl,imx6ull"; +}; + +&atmel_mxt_ts { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/imx6ull-colibri-wifi-eval-v3.dts b/arch/arm/boot/dts/imx6ull-colibri-wifi-eval-v3.dts index df72ce1ae2cb..1d64d1a5d8a7 100644 --- a/arch/arm/boot/dts/imx6ull-colibri-wifi-eval-v3.dts +++ b/arch/arm/boot/dts/imx6ull-colibri-wifi-eval-v3.dts @@ -1,6 +1,6 @@ -// SPDX-License-Identifier: (GPL-2.0 OR MIT) +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT /* - * Copyright 2018 Toradex AG + * Copyright 2018-2022 Toradex */ /dts-v1/; diff --git a/arch/arm/boot/dts/imx6ull-colibri-wifi-iris-v2.dts b/arch/arm/boot/dts/imx6ull-colibri-wifi-iris-v2.dts new file mode 100644 index 000000000000..ce02f8a9ddd3 --- /dev/null +++ b/arch/arm/boot/dts/imx6ull-colibri-wifi-iris-v2.dts @@ -0,0 +1,65 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT +/* + * Copyright 2018-2022 Toradex + */ + +/dts-v1/; + +#include "imx6ull-colibri-wifi.dtsi" +#include "imx6ull-colibri-iris-v2.dtsi" + +/ { + model = "Toradex Colibri iMX6ULL 512MB on Colibri Iris V2"; + compatible = "toradex,colibri-imx6ull-wifi-iris-v2", + "toradex,colibri-imx6ull", + "fsl,imx6ull"; +}; + +&atmel_mxt_ts { + status = "okay"; +}; + +&gpio1 { + /* This turns the LVDS transceiver on */ + lvds-power-on { + gpio-hog; + gpios = <14 GPIO_ACTIVE_HIGH>; /* SODIMM 99 */ + line-name = "LVDS_POWER_ON"; + output-high; + }; +}; + +&gpio2 { + /* + * This switches the LVDS transceiver to the single-channel + * output mode. + */ + lvds-ch-mode { + gpio-hog; + gpios = <0 GPIO_ACTIVE_HIGH>; /* SODIMM 55 */ + line-name = "LVDS_CH_MODE"; + output-high; + }; + + /* + * This switches the LVDS transceiver to the 24-bit RGB mode. + */ + lvds-rgb-mode { + gpio-hog; + gpios = <1 GPIO_ACTIVE_HIGH>; /* SODIMM 63 */ + line-name = "LVDS_RGB_MODE"; + output-low; + }; +}; + +&gpio5 { + /* + * This switches the LVDS transceiver to VESA color mapping mode. + */ + lvds-color-map { + gpio-hog; + gpios = <3 GPIO_ACTIVE_HIGH>; /* SODIMM 95 */ + line-name = "LVDS_COLOR_MAP"; + output-low; + }; +}; diff --git a/arch/arm/boot/dts/imx6ull-colibri-wifi-iris.dts b/arch/arm/boot/dts/imx6ull-colibri-wifi-iris.dts new file mode 100644 index 000000000000..5ac1aa298ce7 --- /dev/null +++ b/arch/arm/boot/dts/imx6ull-colibri-wifi-iris.dts @@ -0,0 +1,20 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT +/* + * Copyright 2018-2022 Toradex + */ + +/dts-v1/; + +#include "imx6ull-colibri-wifi.dtsi" +#include "imx6ull-colibri-iris.dtsi" + +/ { + model = "Toradex Colibri iMX6ULL 512MB on Colibri Iris"; + compatible = "toradex,colibri-imx6ull-wifi-iris", + "toradex,colibri-imx6ull", + "fsl,imx6ull"; +}; + +&atmel_mxt_ts { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/imx6ull-colibri-wifi.dtsi b/arch/arm/boot/dts/imx6ull-colibri-wifi.dtsi index 9f1e38282bee..db59ee6b1c86 100644 --- a/arch/arm/boot/dts/imx6ull-colibri-wifi.dtsi +++ b/arch/arm/boot/dts/imx6ull-colibri-wifi.dtsi @@ -1,6 +1,6 @@ -// SPDX-License-Identifier: (GPL-2.0 OR MIT) +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT /* - * Copyright 2018 Toradex AG + * Copyright 2018-2022 Toradex */ #include "imx6ull-colibri.dtsi" @@ -23,16 +23,152 @@ clock-frequency = <792000000>; }; +&gpio1 { + gpio-line-names = "SODIMM_8", + "SODIMM_6", + "SODIMM_129", + "", + "SODIMM_19", + "SODIMM_21", + "UNUSABLE_SODIMM_180", + "UNUSABLE_SODIMM_184", + "SODIMM_4", + "SODIMM_2", + "SODIMM_106", + "SODIMM_71", + "SODIMM_23", + "SODIMM_31", + "SODIMM_99", + "SODIMM_102", + "SODIMM_33", + "SODIMM_35", + "SODIMM_25", + "SODIMM_27", + "SODIMM_36", + "SODIMM_38", + "SODIMM_32", + "SODIMM_34", + "SODIMM_135", + "SODIMM_77", + "SODIMM_100", + "SODIMM_186", + "SODIMM_196", + "SODIMM_194"; +}; + +&gpio2 { + gpio-line-names = "SODIMM_55", + "SODIMM_63", + "SODIMM_178", + "SODIMM_188", + "SODIMM_73", + "SODIMM_30", + "SODIMM_67", + "SODIMM_104", + "", + "", + "", + "", + "", + "", + "", + "", + "SODIMM_190", + "SODIMM_47", + "SODIMM_192", + "SODIMM_49", + "SODIMM_51", + "SODIMM_53"; +}; + +&gpio3 { + gpio-line-names = "SODIMM_56", + "SODIMM_44", + "SODIMM_68", + "SODIMM_82", + "", + "SODIMM_76", + "SODIMM_70", + "SODIMM_60", + "SODIMM_58", + "SODIMM_78", + "SODIMM_72", + "SODIMM_80", + "SODIMM_46", + "SODIMM_62", + "SODIMM_48", + "SODIMM_74", + "SODIMM_50", + "SODIMM_52", + "SODIMM_54", + "SODIMM_66", + "SODIMM_64", + "SODIMM_57", + "SODIMM_61", + "SODIMM_29", + "SODIMM_37", + "SODIMM_88", + "SODIMM_86", + "SODIMM_92", + "SODIMM_90"; +}; + +&gpio4 { + gpio-line-names = "", + "", + "", + "", + "", + "", + "", + "", + "", + "", + "", + "SODIMM_59", + "", + "", + "SODIMM_133", + "", + "SODIMM_28", + "SODIMM_75", + "SODIMM_96", + "", + "", + "", + "", + "", + "", + "SODIMM_69", + "SODIMM_98", + "SODIMM_85", + "SODIMM_65"; +}; + +&gpio5 { + gpio-line-names = "SODIMM_43", + "SODIMM_45", + "SODIMM_137", + "SODIMM_95", + "SODIMM_107", + "SODIMM_131", + "", + "", + "", + "", + "SODIMM_105"; +}; + &iomuxc { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_gpio1 &pinctrl_gpio2 &pinctrl_gpio3 - &pinctrl_gpio4 &pinctrl_gpio5 &pinctrl_gpio7>; + &pinctrl_gpio4 &pinctrl_gpio7>; }; &iomuxc_snvs { pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_snvs_gpio1 &pinctrl_snvs_gpio2>; + pinctrl-0 = <&pinctrl_snvs_gpio1>; }; &usdhc2 { diff --git a/arch/arm/boot/dts/imx6ull-colibri.dtsi b/arch/arm/boot/dts/imx6ull-colibri.dtsi index 951a2a6c5a65..15621e03fa4d 100644 --- a/arch/arm/boot/dts/imx6ull-colibri.dtsi +++ b/arch/arm/boot/dts/imx6ull-colibri.dtsi @@ -1,22 +1,54 @@ -// SPDX-License-Identifier: GPL-2.0+ OR MIT +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT /* - * Copyright 2018-2021 Toradex + * Copyright 2018-2022 Toradex */ #include "imx6ull.dtsi" / { + /* Ethernet aliases to ensure correct MAC addresses */ aliases { ethernet0 = &fec2; ethernet1 = &fec1; }; - bl: backlight { + backlight: backlight { compatible = "pwm-backlight"; + brightness-levels = <0 4 8 16 32 64 128 255>; + default-brightness-level = <6>; + enable-gpios = <&gpio1 11 GPIO_ACTIVE_HIGH>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_gpio_bl_on>; - enable-gpios = <&gpio1 11 GPIO_ACTIVE_HIGH>; - status = "disabled"; + power-supply = <®_3v3>; + pwms = <&pwm4 0 5000000 1>; + status = "okay"; + }; + + gpio-keys { + compatible = "gpio-keys"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_snvs_gpiokeys>; + + wakeup { + debounce-interval = <10>; + gpios = <&gpio5 1 GPIO_ACTIVE_HIGH>; /* SODIMM 45 */ + label = "Wake-Up"; + linux,code = <KEY_WAKEUP>; + wakeup-source; + }; + }; + + panel_dpi: panel-dpi { + compatible = "edt,et057090dhu"; + backlight = <&backlight>; + power-supply = <®_3v3>; + status = "okay"; + + port { + lcd_panel_in: endpoint { + remote-endpoint = <&lcdif_out>; + }; + }; }; reg_module_3v3: regulator-module-3v3 { @@ -35,7 +67,7 @@ regulator-max-microvolt = <3300000>; }; - reg_sd1_vmmc: regulator-sd1-vmmc { + reg_sd1_vqmmc: regulator-sd1-vqmmc { compatible = "regulator-gpio"; gpios = <&gpio5 9 GPIO_ACTIVE_HIGH>; pinctrl-names = "default"; @@ -47,11 +79,25 @@ states = <1800000 0x1 3300000 0x0>; vin-supply = <®_module_3v3>; }; + + reg_eth_phy: regulator-eth-phy { + compatible = "regulator-fixed-clock"; + regulator-boot-on; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-name = "+V3.3_ETH"; + regulator-type = "voltage"; + vin-supply = <®_module_3v3>; + clocks = <&clks IMX6UL_CLK_ENET2_REF_125M>; + startup-delay-us = <150000>; + }; }; &adc1 { num-channels = <10>; vref-supply = <®_module_3v3_avdd>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_adc1>; }; &can1 { @@ -73,12 +119,14 @@ pinctrl-0 = <&pinctrl_ecspi1 &pinctrl_ecspi1_cs>; }; +/* Ethernet */ &fec2 { pinctrl-names = "default", "sleep"; pinctrl-0 = <&pinctrl_enet2>; pinctrl-1 = <&pinctrl_enet2_sleep>; phy-mode = "rmii"; phy-handle = <ðphy1>; + phy-supply = <®_eth_phy>; status = "okay"; mdio { @@ -93,9 +141,11 @@ }; }; +/* NAND */ &gpmi { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_gpmi_nand>; + fsl,use-minimum-ecc; nand-on-flash-bbt; nand-ecc-mode = "hw"; nand-ecc-strength = <8>; @@ -103,15 +153,35 @@ status = "okay"; }; +/* I2C3_SDA/SCL on SODIMM 194/196 (e.g. RTC on carrier board) */ &i2c1 { pinctrl-names = "default", "gpio"; pinctrl-0 = <&pinctrl_i2c1>; pinctrl-1 = <&pinctrl_i2c1_gpio>; sda-gpios = <&gpio1 29 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; scl-gpios = <&gpio1 28 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; + status = "okay"; + + /* Atmel maxtouch controller */ + atmel_mxt_ts: touchscreen@4a { + compatible = "atmel,maxtouch"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_atmel_conn>; + reg = <0x4a>; + interrupt-parent = <&gpio5>; + interrupts = <4 IRQ_TYPE_EDGE_FALLING>; /* SODIMM 107 / INT */ + reset-gpios = <&gpio1 10 GPIO_ACTIVE_LOW>; /* SODIMM 106 / RST */ + status = "disabled"; + }; }; +/* + * PWR_I2C: power I2C to audio codec, PMIC, temperature sensor and + * touch screen controller + */ &i2c2 { + /* Use low frequency to compensate for the high pull-up values. */ + clock-frequency = <40000>; pinctrl-names = "default", "gpio"; pinctrl-0 = <&pinctrl_i2c2>; pinctrl-1 = <&pinctrl_i2c2_gpio>; @@ -119,7 +189,7 @@ scl-gpios = <&gpio1 30 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; status = "okay"; - ad7879@2c { + ad7879_ts: touchscreen@2c { compatible = "adi,ad7879-1"; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_snvs_ad7879_int>; @@ -140,23 +210,33 @@ pinctrl-names = "default"; pinctrl-0 = <&pinctrl_lcdif_dat &pinctrl_lcdif_ctrl>; + + port { + lcdif_out: endpoint { + remote-endpoint = <&lcd_panel_in>; + }; + }; }; +/* PWM <A> */ &pwm4 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_pwm4>; }; +/* PWM <B> */ &pwm5 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_pwm5>; }; +/* PWM <C> */ &pwm6 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_pwm6>; }; +/* PWM <D> */ &pwm7 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_pwm7>; @@ -170,6 +250,7 @@ status = "disabled"; }; +/* Colibri UART_A */ &uart1 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_uart1 &pinctrl_uart1_ctrl1>; @@ -177,6 +258,7 @@ fsl,dte-mode; }; +/* Colibri UART_B */ &uart2 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_uart2>; @@ -184,12 +266,14 @@ fsl,dte-mode; }; +/* Colibri UART_C */ &uart5 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_uart5>; fsl,dte-mode; }; +/* Colibri USBC */ &usbotg1 { dr_mode = "otg"; srp-disable; @@ -197,14 +281,28 @@ adp-disable; }; +/* Colibri USBH */ &usbotg2 { dr_mode = "host"; }; +/* Colibri MMC/SD */ &usdhc1 { + pinctrl-names = "default", "state_100mhz", "state_200mhz", "sleep"; + pinctrl-0 = <&pinctrl_usdhc1 &pinctrl_snvs_usdhc1_cd>; + pinctrl-1 = <&pinctrl_usdhc1_100mhz &pinctrl_snvs_usdhc1_cd>; + pinctrl-2 = <&pinctrl_usdhc1_200mhz &pinctrl_snvs_usdhc1_cd>; + pinctrl-3 = <&pinctrl_usdhc1 &pinctrl_snvs_usdhc1_cd_sleep>; assigned-clocks = <&clks IMX6UL_CLK_USDHC1_SEL>, <&clks IMX6UL_CLK_USDHC1>; assigned-clock-parents = <&clks IMX6UL_CLK_PLL2_PFD2>; assigned-clock-rates = <0>, <198000000>; + bus-width = <4>; + cd-gpios = <&gpio5 0 GPIO_ACTIVE_LOW>; /* MMC_CD */ + disable-wp; + keep-power-in-suspend; + no-1-8-v; + vqmmc-supply = <®_sd1_vqmmc>; + wakeup-source; }; &wdog1 { @@ -214,13 +312,36 @@ }; &iomuxc { - pinctrl_can_int: canint-grp { + pinctrl_adc1: adc1grp { + fsl,pins = < + MX6UL_PAD_GPIO1_IO00__GPIO1_IO00 0x3000 /* SODIMM 8 */ + MX6UL_PAD_GPIO1_IO01__GPIO1_IO01 0x3000 /* SODIMM 6 */ + MX6UL_PAD_GPIO1_IO08__GPIO1_IO08 0x3000 /* SODIMM 4 */ + MX6UL_PAD_GPIO1_IO09__GPIO1_IO09 0x3000 /* SODIMM 2 */ + >; + }; + + pinctrl_atmel_adap: atmeladapgrp { + fsl,pins = < + MX6UL_PAD_NAND_DQS__GPIO4_IO16 0xb0a0 /* SODIMM 28 */ + MX6UL_PAD_ENET1_TX_EN__GPIO2_IO05 0xb0a0 /* SODIMM 30 */ + >; + }; + + pinctrl_atmel_conn: atmelconngrp { + fsl,pins = < + MX6UL_PAD_JTAG_MOD__GPIO1_IO10 0xb0a0 /* SODIMM 106 */ + MX6ULL_PAD_SNVS_TAMPER4__GPIO5_IO04 0xb0a0 /* SODIMM 107 */ + >; + }; + + pinctrl_can_int: canintgrp { fsl,pins = < MX6UL_PAD_ENET1_TX_DATA1__GPIO2_IO04 0x13010 /* SODIMM 73 */ >; }; - pinctrl_enet2: enet2-grp { + pinctrl_enet2: enet2grp { fsl,pins = < MX6UL_PAD_GPIO1_IO06__ENET2_MDIO 0x1b0b0 MX6UL_PAD_GPIO1_IO07__ENET2_MDC 0x1b0b0 @@ -235,7 +356,7 @@ >; }; - pinctrl_enet2_sleep: enet2sleepgrp { + pinctrl_enet2_sleep: enet2-sleepgrp { fsl,pins = < MX6UL_PAD_GPIO1_IO06__GPIO1_IO06 0x0 MX6UL_PAD_GPIO1_IO07__GPIO1_IO07 0x0 @@ -250,13 +371,13 @@ >; }; - pinctrl_ecspi1_cs: ecspi1-cs-grp { + pinctrl_ecspi1_cs: ecspi1csgrp { fsl,pins = < MX6UL_PAD_LCD_DATA21__GPIO3_IO26 0x70a0 /* SODIMM 86 */ >; }; - pinctrl_ecspi1: ecspi1-grp { + pinctrl_ecspi1: ecspi1grp { fsl,pins = < MX6UL_PAD_LCD_DATA20__ECSPI1_SCLK 0x000a0 /* SODIMM 88 */ MX6UL_PAD_LCD_DATA22__ECSPI1_MOSI 0x000a0 /* SODIMM 92 */ @@ -264,27 +385,27 @@ >; }; - pinctrl_flexcan1: flexcan1-grp { + pinctrl_flexcan1: flexcan1grp { fsl,pins = < MX6UL_PAD_ENET1_RX_DATA0__FLEXCAN1_TX 0x1b020 MX6UL_PAD_ENET1_RX_DATA1__FLEXCAN1_RX 0x1b020 >; }; - pinctrl_flexcan2: flexcan2-grp { + pinctrl_flexcan2: flexcan2grp { fsl,pins = < MX6UL_PAD_ENET1_TX_DATA0__FLEXCAN2_RX 0x1b020 MX6UL_PAD_ENET1_RX_EN__FLEXCAN2_TX 0x1b020 >; }; - pinctrl_gpio_bl_on: gpio-bl-on-grp { + pinctrl_gpio_bl_on: gpioblongrp { fsl,pins = < MX6UL_PAD_JTAG_TMS__GPIO1_IO11 0x30a0 /* SODIMM 71 */ >; }; - pinctrl_gpio1: gpio1-grp { + pinctrl_gpio1: gpio1grp { fsl,pins = < MX6UL_PAD_UART3_RX_DATA__GPIO1_IO25 0x10b0 /* SODIMM 77 */ MX6UL_PAD_JTAG_TCK__GPIO1_IO14 0x70a0 /* SODIMM 99 */ @@ -297,7 +418,7 @@ >; }; - pinctrl_gpio2: gpio2-grp { /* Camera */ + pinctrl_gpio2: gpio2grp { /* Camera */ fsl,pins = < MX6UL_PAD_CSI_DATA04__GPIO4_IO25 0x10b0 /* SODIMM 69 */ MX6UL_PAD_CSI_MCLK__GPIO4_IO17 0x10b0 /* SODIMM 75 */ @@ -307,26 +428,20 @@ >; }; - pinctrl_gpio3: gpio3-grp { /* CAN2 */ + pinctrl_gpio3: gpio3grp { /* CAN2 */ fsl,pins = < MX6UL_PAD_ENET1_RX_EN__GPIO2_IO02 0x10b0 /* SODIMM 178 */ MX6UL_PAD_ENET1_TX_DATA0__GPIO2_IO03 0x10b0 /* SODIMM 188 */ >; }; - pinctrl_gpio4: gpio4-grp { + pinctrl_gpio4: gpio4grp { fsl,pins = < MX6UL_PAD_CSI_DATA07__GPIO4_IO28 0x10b0 /* SODIMM 65 */ >; }; - pinctrl_gpio5: gpio5-grp { /* ATMEL MXT TOUCH */ - fsl,pins = < - MX6UL_PAD_JTAG_MOD__GPIO1_IO10 0xb0a0 /* SODIMM 106 */ - >; - }; - - pinctrl_gpio6: gpio6-grp { /* Wifi pins */ + pinctrl_gpio6: gpio6grp { /* Wifi pins */ fsl,pins = < MX6UL_PAD_GPIO1_IO03__GPIO1_IO03 0x10b0 /* SODIMM 89 */ MX6UL_PAD_CSI_DATA02__GPIO4_IO23 0x10b0 /* SODIMM 79 */ @@ -338,7 +453,7 @@ >; }; - pinctrl_gpio7: gpio7-grp { /* CAN1 */ + pinctrl_gpio7: gpio7grp { /* CAN1 */ fsl,pins = < MX6UL_PAD_ENET1_RX_DATA0__GPIO2_IO00 0xb0b0/* SODIMM 55 */ MX6UL_PAD_ENET1_RX_DATA1__GPIO2_IO01 0xb0b0 /* SODIMM 63 */ @@ -347,9 +462,9 @@ /* * With an eMMC instead of a raw NAND device the following pins - * are available at SODIMM pins + * are available at SODIMM pins. */ - pinctrl_gpmi_gpio: gpmi-gpio-grp { + pinctrl_gpmi_gpio: gpmigpiogrp { fsl,pins = < MX6UL_PAD_NAND_ALE__GPIO4_IO10 0x10b0 /* SODIMM 140 */ MX6UL_PAD_NAND_CE0_B__GPIO4_IO13 0x10b0 /* SODIMM 144 */ @@ -358,7 +473,7 @@ >; }; - pinctrl_gpmi_nand: gpmi-nand-grp { + pinctrl_gpmi_nand: gpminandgrp { fsl,pins = < MX6UL_PAD_NAND_DATA00__RAWNAND_DATA00 0x100a9 MX6UL_PAD_NAND_DATA01__RAWNAND_DATA01 0x100a9 @@ -377,35 +492,35 @@ >; }; - pinctrl_i2c1: i2c1-grp { + pinctrl_i2c1: i2c1grp { fsl,pins = < MX6UL_PAD_UART4_TX_DATA__I2C1_SCL 0x4001b8b0 /* SODIMM 196 */ MX6UL_PAD_UART4_RX_DATA__I2C1_SDA 0x4001b8b0 /* SODIMM 194 */ >; }; - pinctrl_i2c1_gpio: i2c1-gpio-grp { + pinctrl_i2c1_gpio: i2c1-gpiogrp { fsl,pins = < MX6UL_PAD_UART4_TX_DATA__GPIO1_IO28 0x4001b8b0 /* SODIMM 196 */ MX6UL_PAD_UART4_RX_DATA__GPIO1_IO29 0x4001b8b0 /* SODIMM 194 */ >; }; - pinctrl_i2c2: i2c2-grp { + pinctrl_i2c2: i2c2grp { fsl,pins = < - MX6UL_PAD_UART5_TX_DATA__I2C2_SCL 0x4001b8b0 - MX6UL_PAD_UART5_RX_DATA__I2C2_SDA 0x4001b8b0 + MX6UL_PAD_UART5_TX_DATA__I2C2_SCL 0x4001f8b0 + MX6UL_PAD_UART5_RX_DATA__I2C2_SDA 0x4001f8b0 >; }; - pinctrl_i2c2_gpio: i2c2-gpio-grp { + pinctrl_i2c2_gpio: i2c2-gpiogrp { fsl,pins = < - MX6UL_PAD_UART5_TX_DATA__GPIO1_IO30 0x4001b8b0 - MX6UL_PAD_UART5_RX_DATA__GPIO1_IO31 0x4001b8b0 + MX6UL_PAD_UART5_TX_DATA__GPIO1_IO30 0x4001f8b0 + MX6UL_PAD_UART5_RX_DATA__GPIO1_IO31 0x4001f8b0 >; }; - pinctrl_lcdif_dat: lcdif-dat-grp { + pinctrl_lcdif_dat: lcdifdatgrp { fsl,pins = < MX6UL_PAD_LCD_DATA00__LCDIF_DATA00 0x00079 /* SODIMM 76 */ MX6UL_PAD_LCD_DATA01__LCDIF_DATA01 0x00079 /* SODIMM 70 */ @@ -428,7 +543,7 @@ >; }; - pinctrl_lcdif_ctrl: lcdif-ctrl-grp { + pinctrl_lcdif_ctrl: lcdifctrlgrp { fsl,pins = < MX6UL_PAD_LCD_CLK__LCDIF_CLK 0x00079 /* SODIMM 56 */ MX6UL_PAD_LCD_ENABLE__LCDIF_ENABLE 0x00079 /* SODIMM 44 */ @@ -437,31 +552,31 @@ >; }; - pinctrl_pwm4: pwm4-grp { + pinctrl_pwm4: pwm4grp { fsl,pins = < MX6UL_PAD_NAND_WP_B__PWM4_OUT 0x00079 /* SODIMM 59 */ >; }; - pinctrl_pwm5: pwm5-grp { + pinctrl_pwm5: pwm5grp { fsl,pins = < MX6UL_PAD_NAND_DQS__PWM5_OUT 0x00079 /* SODIMM 28 */ >; }; - pinctrl_pwm6: pwm6-grp { + pinctrl_pwm6: pwm6grp { fsl,pins = < MX6UL_PAD_ENET1_TX_EN__PWM6_OUT 0x00079 /* SODIMM 30 */ >; }; - pinctrl_pwm7: pwm7-grp { + pinctrl_pwm7: pwm7grp { fsl,pins = < MX6UL_PAD_ENET1_TX_CLK__PWM7_OUT 0x00079 /* SODIMM 67 */ >; }; - pinctrl_uart1: uart1-grp { + pinctrl_uart1: uart1grp { fsl,pins = < MX6UL_PAD_UART1_TX_DATA__UART1_DTE_RX 0x1b0b1 /* SODIMM 33 */ MX6UL_PAD_UART1_RX_DATA__UART1_DTE_TX 0x1b0b1 /* SODIMM 35 */ @@ -470,16 +585,16 @@ >; }; - pinctrl_uart1_ctrl1: uart1-ctrl1-grp { /* Additional DTR, DCD */ + pinctrl_uart1_ctrl1: uart1ctrl1grp { /* Additional DTR, DCD */ fsl,pins = < - MX6UL_PAD_JTAG_TDI__GPIO1_IO13 0x70a0 /* SODIMM 31 */ - MX6UL_PAD_LCD_DATA18__GPIO3_IO23 0x10b0 /* SODIMM 29 */ - MX6UL_PAD_JTAG_TDO__GPIO1_IO12 0x90b1 /* SODIMM 23 */ - MX6UL_PAD_LCD_DATA19__GPIO3_IO24 0x10b0 /* SODIMM 37 */ + MX6UL_PAD_JTAG_TDI__GPIO1_IO13 0x70a0 /* SODIMM 31 / DCD */ + MX6UL_PAD_LCD_DATA18__GPIO3_IO23 0x10b0 /* SODIMM 29 / DSR */ + MX6UL_PAD_JTAG_TDO__GPIO1_IO12 0x90b1 /* SODIMM 23 / DTR */ + MX6UL_PAD_LCD_DATA19__GPIO3_IO24 0x10b0 /* SODIMM 37 / RI */ >; }; - pinctrl_uart2: uart2-grp { + pinctrl_uart2: uart2grp { fsl,pins = < MX6UL_PAD_UART2_TX_DATA__UART2_DTE_RX 0x1b0b1 /* SODIMM 36 */ MX6UL_PAD_UART2_RX_DATA__UART2_DTE_TX 0x1b0b1 /* SODIMM 38 */ @@ -487,23 +602,23 @@ MX6UL_PAD_UART2_RTS_B__UART2_DTE_CTS 0x1b0b1 /* SODIMM 34 */ >; }; - pinctrl_uart5: uart5-grp { + pinctrl_uart5: uart5grp { fsl,pins = < MX6UL_PAD_GPIO1_IO04__UART5_DTE_RX 0x1b0b1 /* SODIMM 19 */ MX6UL_PAD_GPIO1_IO05__UART5_DTE_TX 0x1b0b1 /* SODIMM 21 */ >; }; - pinctrl_usbh_reg: gpio-usbh-reg { + pinctrl_usbh_reg: usbhreggrp { fsl,pins = < - MX6UL_PAD_GPIO1_IO02__GPIO1_IO02 0x10b0 /* SODIMM 129 */ + MX6UL_PAD_GPIO1_IO02__GPIO1_IO02 0x10b0 /* SODIMM 129 / USBH_PEN */ >; }; - pinctrl_usdhc1: usdhc1-grp { + pinctrl_usdhc1: usdhc1grp { fsl,pins = < - MX6UL_PAD_SD1_CLK__USDHC1_CLK 0x17059 /* SODIMM 47 */ - MX6UL_PAD_SD1_CMD__USDHC1_CMD 0x10059 /* SODIMM 190 */ + MX6UL_PAD_SD1_CLK__USDHC1_CLK 0x10059 /* SODIMM 47 */ + MX6UL_PAD_SD1_CMD__USDHC1_CMD 0x17059 /* SODIMM 190 */ MX6UL_PAD_SD1_DATA0__USDHC1_DATA0 0x17059 /* SODIMM 192 */ MX6UL_PAD_SD1_DATA1__USDHC1_DATA1 0x17059 /* SODIMM 49 */ MX6UL_PAD_SD1_DATA2__USDHC1_DATA2 0x17059 /* SODIMM 51 */ @@ -511,10 +626,10 @@ >; }; - pinctrl_usdhc1_100mhz: usdhc1-100mhz-grp { + pinctrl_usdhc1_100mhz: usdhc1-100mhzgrp { fsl,pins = < - MX6UL_PAD_SD1_CLK__USDHC1_CLK 0x170b9 - MX6UL_PAD_SD1_CMD__USDHC1_CMD 0x100b9 + MX6UL_PAD_SD1_CLK__USDHC1_CLK 0x100b9 + MX6UL_PAD_SD1_CMD__USDHC1_CMD 0x170b9 MX6UL_PAD_SD1_DATA0__USDHC1_DATA0 0x170b9 MX6UL_PAD_SD1_DATA1__USDHC1_DATA1 0x170b9 MX6UL_PAD_SD1_DATA2__USDHC1_DATA2 0x170b9 @@ -522,25 +637,25 @@ >; }; - pinctrl_usdhc1_200mhz: usdhc1-200mhz-grp { + pinctrl_usdhc1_200mhz: usdhc1-200mhzgrp { fsl,pins = < - MX6UL_PAD_SD1_CLK__USDHC1_CLK 0x170f9 - MX6UL_PAD_SD1_CMD__USDHC1_CMD 0x100f9 - MX6UL_PAD_SD1_DATA0__USDHC1_DATA0 0x170b9 - MX6UL_PAD_SD1_DATA1__USDHC1_DATA1 0x170b9 - MX6UL_PAD_SD1_DATA2__USDHC1_DATA2 0x170b9 - MX6UL_PAD_SD1_DATA3__USDHC1_DATA3 0x170b9 + MX6UL_PAD_SD1_CLK__USDHC1_CLK 0x100f9 + MX6UL_PAD_SD1_CMD__USDHC1_CMD 0x170f9 + MX6UL_PAD_SD1_DATA0__USDHC1_DATA0 0x170f9 + MX6UL_PAD_SD1_DATA1__USDHC1_DATA1 0x170f9 + MX6UL_PAD_SD1_DATA2__USDHC1_DATA2 0x170f9 + MX6UL_PAD_SD1_DATA3__USDHC1_DATA3 0x170f9 >; }; - pinctrl_usdhc2: usdhc2-grp { + pinctrl_usdhc2: usdhc2grp { fsl,pins = < MX6UL_PAD_CSI_DATA00__USDHC2_DATA0 0x17069 MX6UL_PAD_CSI_DATA01__USDHC2_DATA1 0x17069 MX6UL_PAD_CSI_DATA02__USDHC2_DATA2 0x17069 MX6UL_PAD_CSI_DATA03__USDHC2_DATA3 0x17069 MX6UL_PAD_CSI_HSYNC__USDHC2_CMD 0x17069 - MX6UL_PAD_CSI_VSYNC__USDHC2_CLK 0x17069 + MX6UL_PAD_CSI_VSYNC__USDHC2_CLK 0x10069 MX6UL_PAD_GPIO1_IO03__OSC32K_32K_OUT 0x10 >; @@ -561,7 +676,7 @@ >; }; - pinctrl_wdog: wdog-grp { + pinctrl_wdog: wdoggrp { fsl,pins = < MX6UL_PAD_LCD_RESET__WDOG1_WDOG_ANY 0x30b0 >; @@ -569,65 +684,59 @@ }; &iomuxc_snvs { - pinctrl_snvs_gpio1: snvs-gpio1-grp { + pinctrl_snvs_gpio1: snvsgpio1grp { fsl,pins = < MX6ULL_PAD_SNVS_TAMPER6__GPIO5_IO06 0x110a0 /* SODIMM 93 */ MX6ULL_PAD_SNVS_TAMPER3__GPIO5_IO03 0x110a0 /* SODIMM 95 */ MX6ULL_PAD_BOOT_MODE0__GPIO5_IO10 0x1b0a0 /* SODIMM 105 */ - MX6ULL_PAD_SNVS_TAMPER5__GPIO5_IO05 0x0b0a0 /* SODIMM 131 */ + MX6ULL_PAD_SNVS_TAMPER5__GPIO5_IO05 0x0b0a0 /* SODIMM 131 / USBH_OC */ MX6ULL_PAD_SNVS_TAMPER8__GPIO5_IO08 0x110a0 /* SODIMM 138 */ >; }; - pinctrl_snvs_gpio2: snvs-gpio2-grp { /* ATMEL MXT TOUCH */ - fsl,pins = < - MX6ULL_PAD_SNVS_TAMPER4__GPIO5_IO04 0xb0a0 /* SODIMM 107 */ - >; - }; - - pinctrl_snvs_gpio3: snvs-gpio3-grp { /* Wifi pins */ + pinctrl_snvs_gpio3: snvsgpio3grp { /* Wifi pins */ fsl,pins = < MX6ULL_PAD_BOOT_MODE1__GPIO5_IO11 0x130a0 /* SODIMM 127 */ >; }; - pinctrl_snvs_ad7879_int: snvs-ad7879-int-grp { /* TOUCH Interrupt */ + pinctrl_snvs_ad7879_int: snvsad7879intgrp { /* TOUCH Interrupt */ fsl,pins = < MX6ULL_PAD_SNVS_TAMPER7__GPIO5_IO07 0x100b0 >; }; - pinctrl_snvs_reg_sd: snvs-reg-sd-grp { + pinctrl_snvs_reg_sd: snvsregsdgrp { fsl,pins = < MX6ULL_PAD_SNVS_TAMPER9__GPIO5_IO09 0x400100b0 >; }; - pinctrl_snvs_usbc_det: snvs-usbc-det-grp { + pinctrl_snvs_usbc_det: snvsusbcdetgrp { fsl,pins = < MX6ULL_PAD_SNVS_TAMPER2__GPIO5_IO02 0x130b0 >; }; - pinctrl_snvs_gpiokeys: snvs-gpiokeys-grp { + pinctrl_snvs_gpiokeys: snvsgpiokeysgrp { fsl,pins = < - MX6ULL_PAD_SNVS_TAMPER1__GPIO5_IO01 0x130a0 /* SODIMM 45 */ + MX6ULL_PAD_SNVS_TAMPER1__GPIO5_IO01 0x130a0 /* SODIMM 45 / WAKE_UP */ >; }; - pinctrl_snvs_usdhc1_cd: snvs-usdhc1-cd-grp { + pinctrl_snvs_usdhc1_cd: snvsusdhc1cdgrp { fsl,pins = < - MX6ULL_PAD_SNVS_TAMPER0__GPIO5_IO00 0x1b0a0 /* SODIMM 43 */ + MX6ULL_PAD_SNVS_TAMPER0__GPIO5_IO00 0x1b0a0 /* SODIMM 43 / MMC_CD */ >; }; - pinctrl_snvs_usdhc1_sleep_cd: snvs-usdhc1-cd-grp-slp { + pinctrl_snvs_usdhc1_cd_sleep: snvsusdhc1cd-sleepgrp { fsl,pins = < MX6ULL_PAD_SNVS_TAMPER0__GPIO5_IO00 0x0 >; }; - pinctrl_snvs_wifi_pdn: snvs-wifi-pdn-grp { + pinctrl_snvs_wifi_pdn: snvswifipdngrp { fsl,pins = < MX6ULL_PAD_BOOT_MODE1__GPIO5_IO11 0x130a0 >; diff --git a/arch/arm/boot/dts/imx6ull-kontron-n6411-som.dtsi b/arch/arm/boot/dts/imx6ull-kontron-n6411-som.dtsi index b7e984284e1a..d000606c0704 100644 --- a/arch/arm/boot/dts/imx6ull-kontron-n6411-som.dtsi +++ b/arch/arm/boot/dts/imx6ull-kontron-n6411-som.dtsi @@ -18,7 +18,7 @@ }; &qspi { - spi-flash@0 { + flash@0 { #address-cells = <1>; #size-cells = <1>; compatible = "spi-nand"; diff --git a/arch/arm/boot/dts/imx6ull-phytec-tauri-emmc.dts b/arch/arm/boot/dts/imx6ull-phytec-tauri-emmc.dts new file mode 100644 index 000000000000..14adb87da911 --- /dev/null +++ b/arch/arm/boot/dts/imx6ull-phytec-tauri-emmc.dts @@ -0,0 +1,20 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright (C) 2021 PHYTEC Messtechnik GmbH + * Author: Alexander Bauer <a.bauer@phytec.de> + */ + +/dts-v1/; +#include "imx6ull-phytec-tauri.dtsi" + +/ { + model = "PHYTEC phyGate-Tauri i.MX6 UltraLite"; + compatible = "phytec,imx6ull-phygate-tauri", + "phytec,imx6ull-phygate-tauri-emmc", + "phytec,imx6ull-pcl063", "fsl,imx6ull"; +}; + +/* EMMC-Version */ +&usdhc2 { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/imx6ull-phytec-tauri-nand.dts b/arch/arm/boot/dts/imx6ull-phytec-tauri-nand.dts new file mode 100644 index 000000000000..ae396ac63443 --- /dev/null +++ b/arch/arm/boot/dts/imx6ull-phytec-tauri-nand.dts @@ -0,0 +1,20 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright (C) 2021 PHYTEC Messtechnik GmbH + * Author: Alexander Bauer <a.bauer@phytec.de> + */ + +/dts-v1/; +#include "imx6ull-phytec-tauri.dtsi" + +/ { + model = "PHYTEC phyGate-Tauri i.MX6 UltraLite"; + compatible = "phytec,imx6ull-phygate-tauri", + "phytec,imx6ull-phygate-tauri-nand", + "phytec,imx6ull-pcl063", "fsl,imx6ull"; +}; + +/* NAND-Version */ +&gpmi { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/imx6ull-phytec-tauri.dtsi b/arch/arm/boot/dts/imx6ull-phytec-tauri.dtsi new file mode 100644 index 000000000000..5464a52a1f94 --- /dev/null +++ b/arch/arm/boot/dts/imx6ull-phytec-tauri.dtsi @@ -0,0 +1,588 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright (C) 2021 PHYTEC Messtechnik GmbH + * Author: Alexander Bauer <a.bauer@phytec.de> + */ + +/dts-v1/; +#include "imx6ull.dtsi" +#include "imx6ull-phytec-phycore-som.dtsi" + +/ { + + model = "PHYTEC phyGate-Tauri i.MX6 UltraLite"; + compatible = "phytec,imx6ull-phygate-tauri", + "phytec,imx6ull-pcl063", "fsl,imx6ull"; + + aliases { + rtc0 = &i2c_rtc; + rtc1 = &snvs_rtc; + }; + + gpio_keys: gpio-keys { + compatible = "gpio-key"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_gpio_keys>; + + key { + label = "KEY-A"; + gpios = <&gpio1 18 GPIO_ACTIVE_LOW>; + linux,code = <KEY_A>; + wakeup-source; + }; + }; + + reg_adc1_vref_3v3: regulator-vref-3v3 { + compatible = "regulator-fixed"; + regulator-name = "vref-3v3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; + + reg_s25fl064_hold: regulator-s25fl064-hold { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_s25fl064_hold>; + compatible = "regulator-fixed"; + regulator-name = "s25fl064_hold"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + gpio = <&gpio3 17 GPIO_ACTIVE_HIGH>; + enable-active-high; + regulator-always-on; + }; + + reg_usb_hub_vbus: regulator-hub-otg1-vbus { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usbhubpwr>; + compatible = "regulator-fixed"; + regulator-name = "usb_hub_vbus"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + gpio = <&gpio5 5 GPIO_ACTIVE_HIGH>; + enable-active-high; + regulator-always-on; + }; + + reg_usb_otg1_vbus: regulator-usb-otg1-vbus { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usbotg1pwr>; + compatible = "regulator-fixed"; + regulator-name = "usb_otg1_vbus"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + gpio = <&gpio4 28 GPIO_ACTIVE_HIGH>; + enable-active-high; + regulator-always-on; + }; + + user_leds: user-leds { + compatible = "gpio-leds"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_user_leds>, + <&pinctrl_user_leds_snvs>; + + user-led1 { + label = "yellow"; + gpios = <&gpio1 3 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "off"; + }; + + user-led2 { + label = "red"; + gpios = <&gpio5 9 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "off"; + }; + }; +}; + +&can1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_flexcan1>; + status = "okay"; +}; + +&can2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_flexcan2>; + status = "okay"; +}; + +&ecspi1 { + #address-cells = <1>; + #size-cells = <0>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_ecspi1>, + <&pinctrl_ecspi1_cs>; + cs-gpios = <&gpio3 26 GPIO_ACTIVE_LOW>, + <&gpio3 10 GPIO_ACTIVE_LOW>, + <&gpio3 11 GPIO_ACTIVE_LOW>; + status = "okay"; + + tpm_tis: tpm@1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_tpm>; + compatible = "tcg,tpm_tis-spi"; + reg = <1>; + spi-max-frequency = <20000000>; + interrupt-parent = <&gpio5>; + interrupts = <2 IRQ_TYPE_LEVEL_LOW>; + }; + + s25fl064: flash@2 { + #address-cells = <1>; + #size-cells = <1>; + compatible = " jedec,spi-nor"; + reg = <2>; + spi-max-frequency = <40000000>; + m25p,fast-read; + status = "disabled"; + }; +}; + +&ecspi3 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_ecspi3>; + cs-gpios = <&gpio1 20 GPIO_ACTIVE_LOW>; + dmas = <&sdma 7 8 0>, + <&sdma 8 8 0>; + dma-names = "rx", "tx"; + status = "okay"; +}; + +ðphy1 { + status = "okay"; +}; + +&fec1 { + status = "okay"; +}; + +&fec2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_enet2>; + phy-mode = "rmii"; + phy-handle = <ðphy2>; + status = "okay"; +}; + +&i2c1 { + status = "okay"; + + tmp102: tmp@49 { + compatible = "ti,tmp102"; + reg = <0x49>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_tempsense>; + interrupt-parent = <&gpio5>; + interrupts = <0 IRQ_TYPE_LEVEL_LOW>; + #thermal-sensor-cells = <1>; + }; + + i2c_rtc: rtc@68 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_rtc_int>; + compatible = "microcrystal,rv4162"; + reg = <0x68>; + interrupt-parent = <&gpio5>; + interrupts = <1 IRQ_TYPE_LEVEL_LOW>; + }; +}; + +&i2c2 { + pinctrl-names = "default", "gpio"; + pinctrl-0 = <&pinctrl_i2c2>; + pinctrl-1 = <&pinctrl_i2c2_gpio>; + sda-gpios = <&gpio1 1 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; + scl-gpios = <&gpio1 0 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; + status = "okay"; +}; + +&i2c3 { + pinctrl-names = "default", "gpio"; + pinctrl-0 = <&pinctrl_i2c3>; + pinctrl-1 = <&pinctrl_i2c3_gpio>; + sda-gpios = <&gpio3 5 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; + scl-gpios = <&gpio3 6 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; + status = "okay"; +}; + +&i2c4 { + pinctrl-names = "default", "gpio"; + pinctrl-0 = <&pinctrl_i2c4>; + pinctrl-1 = <&pinctrl_i2c4_gpio>; + sda-gpios = <&gpio3 7 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; + scl-gpios = <&gpio3 8 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; + status = "okay"; +}; + +&mdio { + ethphy2: ethernet-phy@2 { + reg = <2>; + micrel,led-mode = <1>; + clocks = <&clks IMX6UL_CLK_ENET2_REF>; + clock-names = "rmii-ref"; + status = "okay"; + }; +}; + +&pwm3 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pwm3>; + status = "okay"; +}; + +&pwm6 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pwm6>; + status = "okay"; +}; + +&pwm7 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pwm7>; + status = "okay"; +}; + +&pwm8 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pwm8>; + status = "okay"; +}; + +&uart3 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart3>; + status = "okay"; +}; + +/* UART4 * RS485 */ +&uart4 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart4>; + rts-gpios = <&gpio3 2 GPIO_ACTIVE_HIGH>; + rs485-rts-active-high; + linux,rs485-enabled-at-boot-time; + status = "okay"; +}; + +/* UART5 * RS232 */ +&uart5 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart5>; + uart-has-rtscts; + status = "okay"; +}; + +&uart7 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart7>; + status = "okay"; +}; + +/* USB */ +&usbotg1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usb_otg1>; + vbus-supply = <®_usb_otg1_vbus>; + dr_mode = "host"; + disable-over-current; + status = "okay"; +}; + +&usbotg2 { + vbus-supply = <®_usb_hub_vbus>; + disable-over-current; + dr_mode = "host"; + status = "okay"; +}; + +&usdhc1 { + pinctrl-names = "default", "state_100mhz", "state_200mhz"; + pinctrl-0 = <&pinctrl_usdhc1>; + pinctrl-1 = <&pinctrl_usdhc1_100mhz>; + pinctrl-2 = <&pinctrl_usdhc1_200mhz>; + cd-gpios = <&gpio1 19 GPIO_ACTIVE_LOW>; + no-1-8-v; + keep-power-in-suspend; + wakeup-source; + status = "okay"; +}; + +&usdhc2 { + status = "disabled"; +}; + +&iomuxc_snvs { + pinctrl_rtc_int: rtcintgrp { + fsl,pins = < + MX6ULL_PAD_SNVS_TAMPER1__GPIO5_IO01 0x17059 + >; + }; + + pinctrl_stmpe: stmpegrp { + fsl,pins = < + MX6ULL_PAD_SNVS_TAMPER3__GPIO5_IO03 0x17059 + >; + }; + + pinctrl_tempsense: tempsensegrp { + fsl,pins = < + MX6ULL_PAD_SNVS_TAMPER0__GPIO5_IO00 0x17059 + >; + }; + + pinctrl_tpm: tpmgrp { + fsl,pins = < + MX6ULL_PAD_SNVS_TAMPER2__GPIO5_IO02 0x17059 + >; + }; + + pinctrl_usbhubpwr: usbhubpwrgrp { + fsl,pins = < + MX6ULL_PAD_SNVS_TAMPER5__GPIO5_IO05 0x17059 + >; + }; + + pinctrl_user_leds_snvs: user_ledsgrp { + fsl,pins = < + MX6ULL_PAD_SNVS_TAMPER9__GPIO5_IO09 0x79 + >; + }; +}; + +&iomuxc { + pinctrl_gpio: gpiogrp { + fsl,pins = < + MX6UL_PAD_CSI_DATA05__GPIO4_IO26 0x17059 /* nUART_MUX_RS232 */ + MX6UL_PAD_CSI_DATA04__GPIO4_IO25 0x17059 /* nUART_MUX_DUAL_RX_TX */ + >; + }; + + pinctrl_gpio_keys: gpiokeysgrp { + fsl,pins = < + MX6UL_PAD_UART1_CTS_B__GPIO1_IO18 0x79 + >; + }; + + pinctrl_ecspi3: ecspi3grp { + fsl,pins = < + MX6UL_PAD_UART2_RX_DATA__ECSPI3_SCLK 0x100b1 + MX6UL_PAD_UART2_RTS_B__ECSPI3_MISO 0x100b1 + MX6UL_PAD_UART2_CTS_B__ECSPI3_MOSI 0x100b1 + MX6UL_PAD_UART2_TX_DATA__GPIO1_IO20 0x10b0 + >; + }; + + pinctrl_ecspi1: ecspi1grp { + fsl,pins = < + MX6UL_PAD_LCD_DATA20__ECSPI1_SCLK 0x100b1 + MX6UL_PAD_LCD_DATA23__ECSPI1_MISO 0x100b1 + MX6UL_PAD_LCD_DATA22__ECSPI1_MOSI 0x100b1 + >; + }; + + pinctrl_ecspi1_cs: ecspi1csgrp { + fsl,pins = < + MX6UL_PAD_LCD_DATA21__GPIO3_IO26 0x10b0 + MX6UL_PAD_LCD_DATA05__GPIO3_IO10 0x10b0 + MX6UL_PAD_LCD_DATA06__GPIO3_IO11 0x10b0 + >; + }; + + + pinctrl_enet2: enet2grp { + fsl,pins = < + MX6UL_PAD_ENET2_RX_EN__ENET2_RX_EN 0x1b0b0 + MX6UL_PAD_ENET2_RX_ER__ENET2_RX_ER 0x1b0b0 + MX6UL_PAD_ENET2_RX_DATA0__ENET2_RDATA00 0x1b0b0 + MX6UL_PAD_ENET2_RX_DATA1__ENET2_RDATA01 0x1b0b0 + MX6UL_PAD_ENET2_TX_EN__ENET2_TX_EN 0x1b010 + MX6UL_PAD_ENET2_TX_DATA0__ENET2_TDATA00 0x1b010 + MX6UL_PAD_ENET2_TX_DATA1__ENET2_TDATA01 0x1b010 + MX6UL_PAD_ENET2_TX_CLK__ENET2_REF_CLK2 0x4001b010 + >; + }; + + pinctrl_flexcan1: flexcan1grp { + fsl,pins = < + MX6UL_PAD_UART3_CTS_B__FLEXCAN1_TX 0x0b0b0 + MX6UL_PAD_UART3_RTS_B__FLEXCAN1_RX 0x0b0b0 + >; + }; + + pinctrl_flexcan2: flexcan2grp { + fsl,pins = < + MX6UL_PAD_LCD_DATA10__FLEXCAN2_TX 0x0b0b0 + MX6UL_PAD_LCD_DATA11__FLEXCAN2_RX 0x0b0b0 + >; + }; + + princtrl_flexcan2_en: flexcan2engrp { + fsl,pins = < + MX6UL_PAD_UART1_CTS_B__GPIO1_IO18 0x17059 + >; + }; + + pinctrl_i2c2: i2c2grp { + fsl,pins = < + MX6UL_PAD_GPIO1_IO00__I2C2_SCL 0xb0 + MX6UL_PAD_GPIO1_IO01__I2C2_SDA 0xb0 + >; + }; + + pinctrl_i2c2_gpio: i2c2gpiogrp { + fsl,pins = < + MX6UL_PAD_GPIO1_IO00__GPIO1_IO00 0xb0 + MX6UL_PAD_GPIO1_IO01__GPIO1_IO01 0xb0 + >; + }; + + pinctrl_i2c3: i2c3grp { + fsl,pins = < + MX6UL_PAD_LCD_DATA01__I2C3_SCL 0xb0 + MX6UL_PAD_LCD_DATA00__I2C3_SDA 0xb0 + >; + }; + + pinctrl_i2c3_gpio: i2c3gpiogrp { + fsl,pins = < + MX6UL_PAD_LCD_DATA01__GPIO3_IO06 0xb0 + MX6UL_PAD_LCD_DATA00__GPIO3_IO05 0xb0 + >; + }; + + pinctrl_i2c4: i2c4grp { + fsl,pins = < + MX6UL_PAD_LCD_DATA03__I2C4_SCL 0xb0 + MX6UL_PAD_LCD_DATA02__I2C4_SDA 0xb0 + >; + }; + + pinctrl_i2c4_gpio: i2c4gpiogrp { + fsl,pins = < + MX6UL_PAD_LCD_DATA03__GPIO3_IO08 0xb0 + MX6UL_PAD_LCD_DATA02__GPIO3_IO07 0xb0 + >; + }; + + pinctrl_pwm3: pwm3grp { + fsl,pins = < + MX6UL_PAD_GPIO1_IO04__PWM3_OUT 0x0b0b0 + >; + }; + + pinctrl_pwm6: pwm6grp { + fsl,pins = < + MX6UL_PAD_JTAG_TDI__PWM6_OUT 0x0b0b0 + >; + }; + + pinctrl_pwm7: pwm7grp { + fsl,pins = < + MX6UL_PAD_JTAG_TCK__PWM7_OUT 0x0b0b0 + >; + }; + + pinctrl_pwm8: pwm8grp { + fsl,pins = < + MX6UL_PAD_JTAG_TRST_B__PWM8_OUT 0x0b0b0 + >; + }; + + pinctrl_s25fl064_hold: s25fl064holdgrp { + fsl,pins = < + MX6UL_PAD_LCD_DATA12__GPIO3_IO17 0x100b1 + >; + }; + + pinctrl_sai2: sai2grp { + fsl,pins = < + MX6UL_PAD_JTAG_TDI__SAI2_TX_BCLK 0x17088 + MX6UL_PAD_JTAG_TDO__SAI2_TX_SYNC 0x17088 + MX6UL_PAD_JTAG_TRST_B__SAI2_TX_DATA 0x11088 + MX6UL_PAD_JTAG_TCK__SAI2_RX_DATA 0x11088 + MX6UL_PAD_JTAG_TMS__SAI2_MCLK 0x17088 + >; + }; + + pinctrl_uart3: uart3grp { + fsl,pins = < + MX6UL_PAD_UART3_TX_DATA__UART3_DCE_TX 0x1b0b1 + MX6UL_PAD_UART3_RX_DATA__UART3_DCE_RX 0x1b0b1 + >; + }; + + pinctrl_uart4: uart4grp { + fsl,pins = < + MX6UL_PAD_LCD_CLK__UART4_DCE_TX 0x1b0b1 + MX6UL_PAD_LCD_ENABLE__UART4_DCE_RX 0x1b0b1 + MX6UL_PAD_LCD_HSYNC__GPIO3_IO02 0x1b0b1 + >; + }; + + pinctrl_uart5: uart5grp { + fsl,pins = < + MX6UL_PAD_UART5_TX_DATA__UART5_DCE_TX 0x1b0b1 + MX6UL_PAD_UART5_RX_DATA__UART5_DCE_RX 0x1b0b1 + >; + }; + + pinctrl_uart7: uart7grp { + fsl,pins = < + MX6UL_PAD_LCD_DATA16__UART7_DCE_TX 0x1b0b1 + MX6UL_PAD_LCD_DATA17__UART7_DCE_RX 0x1b0b1 + >; + }; + + pinctrl_usb_otg1: usbotg1grp { + fsl,pins = < + MX6UL_PAD_CSI_DATA06__GPIO4_IO27 0x80 + >; + }; + + pinctrl_usbotg1pwr: usbotg1pwrgrp { + fsl,pins = < + MX6UL_PAD_CSI_DATA07__GPIO4_IO28 0x17059 + >; + }; + + pinctrl_usdhc1: usdhc1grp { + fsl,pins = < + MX6UL_PAD_SD1_CMD__USDHC1_CMD 0x17059 + MX6UL_PAD_SD1_CLK__USDHC1_CLK 0x10059 + MX6UL_PAD_SD1_DATA0__USDHC1_DATA0 0x17059 + MX6UL_PAD_SD1_DATA1__USDHC1_DATA1 0x17059 + MX6UL_PAD_SD1_DATA2__USDHC1_DATA2 0x17059 + MX6UL_PAD_SD1_DATA3__USDHC1_DATA3 0x17059 + MX6UL_PAD_UART1_RTS_B__GPIO1_IO19 0x17059 + >; + }; + + pinctrl_usdhc1_100mhz: usdhc1100mhzgrp { + fsl,pins = < + MX6UL_PAD_SD1_CMD__USDHC1_CMD 0x170b9 + MX6UL_PAD_SD1_CLK__USDHC1_CLK 0x100b9 + MX6UL_PAD_SD1_DATA0__USDHC1_DATA0 0x170b9 + MX6UL_PAD_SD1_DATA1__USDHC1_DATA1 0x170b9 + MX6UL_PAD_SD1_DATA2__USDHC1_DATA2 0x170b9 + MX6UL_PAD_SD1_DATA3__USDHC1_DATA3 0x170b9 + >; + }; + + pinctrl_usdhc1_200mhz: usdhc1200mhzgrp { + fsl,pins = < + MX6UL_PAD_SD1_CMD__USDHC1_CMD 0x170f9 + MX6UL_PAD_SD1_CLK__USDHC1_CLK 0x100f9 + MX6UL_PAD_SD1_DATA0__USDHC1_DATA0 0x170f9 + MX6UL_PAD_SD1_DATA1__USDHC1_DATA1 0x170f9 + MX6UL_PAD_SD1_DATA2__USDHC1_DATA2 0x170f9 + MX6UL_PAD_SD1_DATA3__USDHC1_DATA3 0x170f9 + >; + }; + + pinctrl_user_leds: userledsgrp { + fsl,pins = < + MX6UL_PAD_GPIO1_IO03__GPIO1_IO03 0x79 + >; + }; +}; diff --git a/arch/arm/boot/dts/imx6ull-tqma6ull2-mba6ulx.dts b/arch/arm/boot/dts/imx6ull-tqma6ull2-mba6ulx.dts new file mode 100644 index 000000000000..e593b7036fc7 --- /dev/null +++ b/arch/arm/boot/dts/imx6ull-tqma6ull2-mba6ulx.dts @@ -0,0 +1,15 @@ +// SPDX-License-Identifier: (GPL-2.0-or-later OR MIT) +/* + * Copyright 2018-2022 TQ-Systems GmbH + * Author: Markus Niebel <Markus.Niebel@tq-group.com> + */ + +/dts-v1/; + +#include "imx6ull-tqma6ull2.dtsi" +#include "mba6ulx.dtsi" + +/ { + model = "TQ-Systems TQMa6ULL2 SoM on MBa6ULx board"; + compatible = "tq,imx6ull-tqma6ull2-mba6ulx", "tq,imx6ull-tqma6ull2", "fsl,imx6ull"; +}; diff --git a/arch/arm/boot/dts/imx6ull-tqma6ull2.dtsi b/arch/arm/boot/dts/imx6ull-tqma6ull2.dtsi new file mode 100644 index 000000000000..326e6da91ed4 --- /dev/null +++ b/arch/arm/boot/dts/imx6ull-tqma6ull2.dtsi @@ -0,0 +1,76 @@ +// SPDX-License-Identifier: (GPL-2.0-or-later OR MIT) +/* + * Copyright 2018-2022 TQ-Systems GmbH + * Author: Markus Niebel <Markus.Niebel@tq-group.com> + */ + +#include "imx6ull.dtsi" +#include "imx6ul-tqma6ul-common.dtsi" +#include "imx6ul-tqma6ulx-common.dtsi" + +/ { + model = "TQ-Systems TQMa6ULL2 SoM"; + compatible = "tq,imx6ull-tqma6ull2", "fsl,imx6ull"; +}; + +&usdhc2 { + fsl,tuning-step= <6>; + /* Errata ERR010450 Workaround */ + max-frequency = <99000000>; + assigned-clocks = <&clks IMX6UL_CLK_USDHC2_SEL>, <&clks IMX6UL_CLK_USDHC2>; + assigned-clock-parents = <&clks IMX6UL_CLK_PLL2_PFD2>; + assigned-clock-rates = <0>, <198000000>; +}; + +&iomuxc { + pinctrl_usdhc2: usdhc2grp { + fsl,pins = < + MX6UL_PAD_NAND_RE_B__USDHC2_CLK 0x00017031 + MX6UL_PAD_NAND_WE_B__USDHC2_CMD 0x00017039 + MX6UL_PAD_NAND_DATA00__USDHC2_DATA0 0x00017039 + MX6UL_PAD_NAND_DATA01__USDHC2_DATA1 0x00017039 + MX6UL_PAD_NAND_DATA02__USDHC2_DATA2 0x00017039 + MX6UL_PAD_NAND_DATA03__USDHC2_DATA3 0x00017039 + MX6UL_PAD_NAND_DATA04__USDHC2_DATA4 0x00017039 + MX6UL_PAD_NAND_DATA05__USDHC2_DATA5 0x00017039 + MX6UL_PAD_NAND_DATA06__USDHC2_DATA6 0x00017039 + MX6UL_PAD_NAND_DATA07__USDHC2_DATA7 0x00017039 + /* rst */ + MX6UL_PAD_NAND_ALE__GPIO4_IO10 0x0001b051 + >; + }; + + pinctrl_usdhc2_100mhz: usdhc2-100mhzgrp { + fsl,pins = < + MX6UL_PAD_NAND_RE_B__USDHC2_CLK 0x000170f1 + MX6UL_PAD_NAND_WE_B__USDHC2_CMD 0x000170f1 + MX6UL_PAD_NAND_DATA00__USDHC2_DATA0 0x000170f1 + MX6UL_PAD_NAND_DATA01__USDHC2_DATA1 0x000170f1 + MX6UL_PAD_NAND_DATA02__USDHC2_DATA2 0x000170f1 + MX6UL_PAD_NAND_DATA03__USDHC2_DATA3 0x000170f1 + MX6UL_PAD_NAND_DATA04__USDHC2_DATA4 0x000170f1 + MX6UL_PAD_NAND_DATA05__USDHC2_DATA5 0x000170f1 + MX6UL_PAD_NAND_DATA06__USDHC2_DATA6 0x000170f1 + MX6UL_PAD_NAND_DATA07__USDHC2_DATA7 0x000170f1 + /* rst */ + MX6UL_PAD_NAND_ALE__GPIO4_IO10 0x0001b051 + >; + }; + + pinctrl_usdhc2_200mhz: usdhc2-200mhzgrp { + fsl,pins = < + MX6UL_PAD_NAND_RE_B__USDHC2_CLK 0x000170f1 + MX6UL_PAD_NAND_WE_B__USDHC2_CMD 0x000170f1 + MX6UL_PAD_NAND_DATA00__USDHC2_DATA0 0x000170f1 + MX6UL_PAD_NAND_DATA01__USDHC2_DATA1 0x000170f1 + MX6UL_PAD_NAND_DATA02__USDHC2_DATA2 0x000170f1 + MX6UL_PAD_NAND_DATA03__USDHC2_DATA3 0x000170f1 + MX6UL_PAD_NAND_DATA04__USDHC2_DATA4 0x000170f1 + MX6UL_PAD_NAND_DATA05__USDHC2_DATA5 0x000170f1 + MX6UL_PAD_NAND_DATA06__USDHC2_DATA6 0x000170f1 + MX6UL_PAD_NAND_DATA07__USDHC2_DATA7 0x000170f1 + /* rst */ + MX6UL_PAD_NAND_ALE__GPIO4_IO10 0x0001b051 + >; + }; +}; diff --git a/arch/arm/boot/dts/imx6ull-tqma6ull2l-mba6ulx.dts b/arch/arm/boot/dts/imx6ull-tqma6ull2l-mba6ulx.dts new file mode 100644 index 000000000000..33437aae9822 --- /dev/null +++ b/arch/arm/boot/dts/imx6ull-tqma6ull2l-mba6ulx.dts @@ -0,0 +1,15 @@ +// SPDX-License-Identifier: (GPL-2.0-or-later OR MIT) +/* + * Copyright 2018-2022 TQ-Systems GmbH + * Author: Markus Niebel <Markus.Niebel@tq-group.com> + */ + +/dts-v1/; + +#include "imx6ull-tqma6ull2l.dtsi" +#include "mba6ulx.dtsi" + +/ { + model = "TQ Systems TQMa6ULL2L SoM on MBa6ULx board"; + compatible = "tq,imx6ull-tqma6ull2l-mba6ulx", "tq,imx6ull-tqma6ull2l", "fsl,imx6ull"; +}; diff --git a/arch/arm/boot/dts/imx6ull-tqma6ull2l.dtsi b/arch/arm/boot/dts/imx6ull-tqma6ull2l.dtsi new file mode 100644 index 000000000000..8e4d5cd18614 --- /dev/null +++ b/arch/arm/boot/dts/imx6ull-tqma6ull2l.dtsi @@ -0,0 +1,76 @@ +// SPDX-License-Identifier: (GPL-2.0-or-later OR MIT) +/* + * Copyright 2018-2022 TQ-Systems GmbH + * Author: Markus Niebel <Markus.Niebel@tq-group.com> + */ + +#include "imx6ull.dtsi" +#include "imx6ul-tqma6ul-common.dtsi" +#include "imx6ul-tqma6ulxl-common.dtsi" + +/ { + model = "TQ Systems TQMa6ULL2L SoM"; + compatible = "tq,imx6ull-tqma6ull2l", "fsl,imx6ull"; +}; + +&usdhc2 { + fsl,tuning-step= <6>; + /* Errata ERR010450 Workaround */ + max-frequency = <99000000>; + assigned-clocks = <&clks IMX6UL_CLK_USDHC2_SEL>, <&clks IMX6UL_CLK_USDHC2>; + assigned-clock-parents = <&clks IMX6UL_CLK_PLL2_PFD2>; + assigned-clock-rates = <0>, <198000000>; +}; + +&iomuxc { + pinctrl_usdhc2: usdhc2grp { + fsl,pins = < + MX6UL_PAD_NAND_RE_B__USDHC2_CLK 0x00017031 + MX6UL_PAD_NAND_WE_B__USDHC2_CMD 0x00017039 + MX6UL_PAD_NAND_DATA00__USDHC2_DATA0 0x00017039 + MX6UL_PAD_NAND_DATA01__USDHC2_DATA1 0x00017039 + MX6UL_PAD_NAND_DATA02__USDHC2_DATA2 0x00017039 + MX6UL_PAD_NAND_DATA03__USDHC2_DATA3 0x00017039 + MX6UL_PAD_NAND_DATA04__USDHC2_DATA4 0x00017039 + MX6UL_PAD_NAND_DATA05__USDHC2_DATA5 0x00017039 + MX6UL_PAD_NAND_DATA06__USDHC2_DATA6 0x00017039 + MX6UL_PAD_NAND_DATA07__USDHC2_DATA7 0x00017039 + /* rst */ + MX6UL_PAD_NAND_ALE__GPIO4_IO10 0x0001b051 + >; + }; + + pinctrl_usdhc2_100mhz: usdhc2-100mhzgrp { + fsl,pins = < + MX6UL_PAD_NAND_RE_B__USDHC2_CLK 0x000170f1 + MX6UL_PAD_NAND_WE_B__USDHC2_CMD 0x000170f1 + MX6UL_PAD_NAND_DATA00__USDHC2_DATA0 0x000170f1 + MX6UL_PAD_NAND_DATA01__USDHC2_DATA1 0x000170f1 + MX6UL_PAD_NAND_DATA02__USDHC2_DATA2 0x000170f1 + MX6UL_PAD_NAND_DATA03__USDHC2_DATA3 0x000170f1 + MX6UL_PAD_NAND_DATA04__USDHC2_DATA4 0x000170f1 + MX6UL_PAD_NAND_DATA05__USDHC2_DATA5 0x000170f1 + MX6UL_PAD_NAND_DATA06__USDHC2_DATA6 0x000170f1 + MX6UL_PAD_NAND_DATA07__USDHC2_DATA7 0x000170f1 + /* rst */ + MX6UL_PAD_NAND_ALE__GPIO4_IO10 0x0001b051 + >; + }; + + pinctrl_usdhc2_200mhz: usdhc2-200mhzgrp { + fsl,pins = < + MX6UL_PAD_NAND_RE_B__USDHC2_CLK 0x000170f1 + MX6UL_PAD_NAND_WE_B__USDHC2_CMD 0x000170f1 + MX6UL_PAD_NAND_DATA00__USDHC2_DATA0 0x000170f1 + MX6UL_PAD_NAND_DATA01__USDHC2_DATA1 0x000170f1 + MX6UL_PAD_NAND_DATA02__USDHC2_DATA2 0x000170f1 + MX6UL_PAD_NAND_DATA03__USDHC2_DATA3 0x000170f1 + MX6UL_PAD_NAND_DATA04__USDHC2_DATA4 0x000170f1 + MX6UL_PAD_NAND_DATA05__USDHC2_DATA5 0x000170f1 + MX6UL_PAD_NAND_DATA06__USDHC2_DATA6 0x000170f1 + MX6UL_PAD_NAND_DATA07__USDHC2_DATA7 0x000170f1 + /* rst */ + MX6UL_PAD_NAND_ALE__GPIO4_IO10 0x0001b051 + >; + }; +}; diff --git a/arch/arm/boot/dts/imx7d-smegw01.dts b/arch/arm/boot/dts/imx7d-smegw01.dts new file mode 100644 index 000000000000..c6b32064a009 --- /dev/null +++ b/arch/arm/boot/dts/imx7d-smegw01.dts @@ -0,0 +1,469 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +// +// Copyright (C) 2020 PHYTEC Messtechnik GmbH +// Author: Jens Lang <J.Lang@phytec.de> +// Copyright (C) 2021 Fabio Estevam <festevam@denx.de> + +/dts-v1/; +#include <dt-bindings/gpio/gpio.h> +#include "imx7d.dtsi" + +/ { + model = "Storopack SMEGW01 board"; + compatible = "storopack,imx7d-smegw01", "fsl,imx7d"; + + aliases { + mmc0 = &usdhc1; + mmc1 = &usdhc3; + mmc2 = &usdhc2; + rtc0 = &i2c_rtc; + rtc1 = &snvs_rtc; + }; + + chosen { + stdout-path = &uart1; + }; + + memory@80000000 { + device_type = "memory"; + reg = <0x80000000 0x20000000>; + }; + + reg_lte_on: regulator-lte-on { + compatible = "regulator-fixed"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_lte_on>; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-name = "lte_on"; + gpio = <&gpio7 12 GPIO_ACTIVE_HIGH>; + enable-active-high; + regulator-always-on; + }; + + reg_lte_nreset: regulator-lte-nreset { + compatible = "regulator-fixed"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_lte_nreset>; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-name = "LTE_nReset"; + gpio = <&gpio6 21 GPIO_ACTIVE_HIGH>; + enable-active-high; + regulator-always-on; + }; + + reg_wifi: regulator-wifi { + compatible = "regulator-fixed"; + gpio = <&gpio2 30 GPIO_ACTIVE_HIGH>; + enable-active-high; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_wifi>; + regulator-name = "wifi_reg"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; + + reg_wlan_rfkill: regulator-wlan-rfkill { + compatible = "regulator-fixed"; + pinctrl-names = "default"; + pinctrl-2 = <&pinctrl_rfkill>; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-name = "wlan_rfkill"; + gpio = <&gpio2 11 GPIO_ACTIVE_HIGH>; + enable-active-high; + regulator-always-on; + }; + + reg_usbotg_vbus: regulator-usbotg-vbus { + compatible = "regulator-fixed"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usbotg1_pwr_gpio>; + regulator-name = "usb_otg_vbus"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + gpio = <&gpio1 05 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; +}; + +&ecspi1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_ecspi1>; + cs-gpios = <&gpio4 19 GPIO_ACTIVE_LOW>; + status = "okay"; + + sram@0 { + compatible = "microchip,48l640"; + reg = <0>; + #address-cells = <1>; + #size-cells = <1>; + spi-max-frequency = <16000000>; + }; +}; + +&fec1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_enet1>; + assigned-clocks = <&clks IMX7D_ENET1_TIME_ROOT_SRC>, + <&clks IMX7D_ENET1_TIME_ROOT_CLK>; + assigned-clock-parents = <&clks IMX7D_PLL_ENET_MAIN_100M_CLK>; + assigned-clock-rates = <0>, <100000000>; + phy-mode = "rgmii-id"; + phy-handle = <ðphy0>; + fsl,magic-packet; + status = "okay"; + + mdio: mdio { + #address-cells = <1>; + #size-cells = <0>; + + ethphy0: ethernet-phy@1 { + compatible = "ethernet-phy-id0022.1622", + "ethernet-phy-ieee802.3-c22"; + reg = <1>; + reset-gpios = <&gpio2 28 GPIO_ACTIVE_LOW>; + }; + + ethphy1: ethernet-phy@2 { + compatible = "ethernet-phy-id0022.1622", + "ethernet-phy-ieee802.3-c22"; + reg = <2>; + }; + }; +}; + +&fec2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_enet2>; + assigned-clocks = <&clks IMX7D_ENET2_TIME_ROOT_SRC>, + <&clks IMX7D_ENET2_TIME_ROOT_CLK>; + assigned-clock-parents = <&clks IMX7D_PLL_ENET_MAIN_100M_CLK>; + assigned-clock-rates = <0>, <100000000>; + phy-mode = "rgmii-id"; + phy-handle = <ðphy1>; + fsl,magic-packet; + status = "okay"; +}; + +&i2c2 { + pinctrl-names = "default"; + pinctrl-0 =<&pinctrl_i2c2>; + clock-frequency = <100000>; + status = "okay"; + + i2c_rtc: rtc@52 { + compatible = "microcrystal,rv3028"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_rtc_int>; + reg = <0x52>; + interrupt-parent = <&gpio2>; + interrupts = <15 IRQ_TYPE_LEVEL_LOW>; + }; +}; + +&flexcan1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_flexcan1>; + status = "okay"; +}; + +&flexcan2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_flexcan2>; + status = "okay"; +}; + +&uart1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart1>; + status = "okay"; +}; + +&uart3 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart3>; + status = "okay"; +}; + +&usbotg1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usbotg1_lpsr>; + dr_mode = "otg"; + vbus-supply = <®_usbotg_vbus>; + status = "okay"; +}; + +&usbotg2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usbotg2>; + dr_mode = "host"; + status = "okay"; +}; + +&usdhc1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usdhc1>; + cd-gpios = <&gpio5 0 GPIO_ACTIVE_LOW>; + no-1-8-v; + enable-sdio-wakeup; + keep-power-in-suspend; + status = "okay"; +}; + +&usdhc2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usdhc2>; + bus-width = <4>; + non-removable; + cap-sd-highspeed; + sd-uhs-ddr50; + mmc-ddr-1_8v; + vmmc-supply = <®_wifi>; + enable-sdio-wakeup; + status = "okay"; +}; + +&usdhc3 { + pinctrl-names = "default", "state_100mhz", "state_200mhz"; + pinctrl-0 = <&pinctrl_usdhc3>; + pinctrl-1 = <&pinctrl_usdhc3_100mhz>; + pinctrl-2 = <&pinctrl_usdhc3_200mhz>; + assigned-clocks = <&clks IMX7D_USDHC3_ROOT_CLK>; + assigned-clock-rates = <400000000>; + max-frequency = <200000000>; + bus-width = <8>; + fsl,tuning-step = <1>; + non-removable; + cap-mmc-highspeed; + cap-mmc-hw-reset; + mmc-hs200-1_8v; + mmc-ddr-1_8v; + status = "okay"; +}; + +&wdog1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_wdog>; + fsl,ext-reset-output; + status = "okay"; +}; + +&iomuxc { + pinctrl_ecspi1: ecspi1grp { + fsl,pins = < + MX7D_PAD_ECSPI1_SS0__GPIO4_IO19 0x04 + MX7D_PAD_ECSPI1_SCLK__ECSPI1_SCLK 0x04 + MX7D_PAD_ECSPI1_MOSI__ECSPI1_MOSI 0x04 + MX7D_PAD_ECSPI1_MISO__ECSPI1_MISO 0x04 + >; + }; + + pinctrl_enet1: enet1grp { + fsl,pins = < + MX7D_PAD_ENET1_RGMII_RX_CTL__ENET1_RGMII_RX_CTL 0x5 + MX7D_PAD_ENET1_RGMII_RD0__ENET1_RGMII_RD0 0x5 + MX7D_PAD_ENET1_RGMII_RD1__ENET1_RGMII_RD1 0x5 + MX7D_PAD_ENET1_RGMII_RD2__ENET1_RGMII_RD2 0x5 + MX7D_PAD_ENET1_RGMII_RD3__ENET1_RGMII_RD3 0x5 + MX7D_PAD_ENET1_RGMII_RXC__ENET1_RGMII_RXC 0x5 + MX7D_PAD_ENET1_RGMII_TX_CTL__ENET1_RGMII_TX_CTL 0x5 + MX7D_PAD_ENET1_RGMII_TD0__ENET1_RGMII_TD0 0x5 + MX7D_PAD_ENET1_RGMII_TD1__ENET1_RGMII_TD1 0x5 + MX7D_PAD_ENET1_RGMII_TD2__ENET1_RGMII_TD2 0x5 + MX7D_PAD_ENET1_RGMII_TD3__ENET1_RGMII_TD3 0x5 + MX7D_PAD_ENET1_RGMII_TXC__ENET1_RGMII_TXC 0x5 + MX7D_PAD_GPIO1_IO10__ENET1_MDIO 0x7 + MX7D_PAD_GPIO1_IO11__ENET1_MDC 0x7 + >; + }; + + pinctrl_enet2: enet2grp { + fsl,pins = < + MX7D_PAD_EPDC_SDCE0__ENET2_RGMII_RX_CTL 0x5 + MX7D_PAD_EPDC_SDCE1__ENET2_RGMII_RXC 0x5 + MX7D_PAD_EPDC_SDCLK__ENET2_RGMII_RD0 0x5 + MX7D_PAD_EPDC_SDLE__ENET2_RGMII_RD1 0x5 + MX7D_PAD_EPDC_SDOE__ENET2_RGMII_RD2 0x5 + MX7D_PAD_EPDC_SDSHR__ENET2_RGMII_RD3 0x5 + MX7D_PAD_EPDC_SDCE2__ENET2_RGMII_TD0 0x5 + MX7D_PAD_EPDC_SDCE3__ENET2_RGMII_TD1 0x5 + MX7D_PAD_EPDC_GDCLK__ENET2_RGMII_TD2 0x5 + MX7D_PAD_EPDC_GDOE__ENET2_RGMII_TD3 0x5 + MX7D_PAD_EPDC_GDRL__ENET2_RGMII_TX_CTL 0x5 + MX7D_PAD_EPDC_GDSP__ENET2_RGMII_TXC 0x5 + MX7D_PAD_GPIO1_IO09__GPIO1_IO9 0x08 + >; + }; + + pinctrl_i2c2: i2c2grp { + fsl,pins = < + MX7D_PAD_I2C2_SCL__I2C2_SCL 0x40000004 + MX7D_PAD_I2C2_SDA__I2C2_SDA 0x40000004 + >; + }; + + pinctrl_flexcan1: flexcan1grp { + fsl,pins = < + MX7D_PAD_GPIO1_IO12__FLEXCAN1_RX 0x0b0b0 + MX7D_PAD_GPIO1_IO13__FLEXCAN1_TX 0x0b0b0 + >; + }; + + pinctrl_flexcan2: flexcan2grp { + fsl,pins = < + MX7D_PAD_GPIO1_IO14__FLEXCAN2_RX 0x0b0b0 + MX7D_PAD_GPIO1_IO15__FLEXCAN2_TX 0x0b0b0 + >; + }; + + pinctrl_lte_on: lteongrp { + fsl,pins = < + MX7D_PAD_ENET1_TX_CLK__GPIO7_IO12 0x17059 + >; + }; + + pinctrl_lte_nreset: ltenresetgrp { + fsl,pins = < + MX7D_PAD_SAI2_RX_DATA__GPIO6_IO21 0x17059 + >; + }; + + pinctrl_rfkill: rfkillrp { + fsl,pins = < + MX7D_PAD_EPDC_DATA11__GPIO2_IO11 0x17059 + >; + }; + + pinctrl_rtc_int: rtcintgrp { + fsl,pins = < + MX7D_PAD_EPDC_DATA15__GPIO2_IO15 0x17059 + >; + }; + + pinctrl_uart1: uart1grp { + fsl,pins = < + MX7D_PAD_UART1_TX_DATA__UART1_DCE_TX 0x74 + MX7D_PAD_UART1_RX_DATA__UART1_DCE_RX 0x7c + >; + }; + + pinctrl_uart3: uart3grp { + fsl,pins = < + MX7D_PAD_UART3_TX_DATA__UART3_DCE_TX 0x7c + MX7D_PAD_UART3_RX_DATA__UART3_DCE_RX 0x74 + >; + }; + + pinctrl_usbotg1_lpsr: usbotg1 { + fsl,pins = < + MX7D_PAD_LPSR_GPIO1_IO04__USB_OTG1_OC 0x04 + >; + }; + + pinctrl_usbotg1_pwr: usbotg1-pwr { + fsl,pins = < + MX7D_PAD_LPSR_GPIO1_IO05__USB_OTG1_PWR 0x04 + >; + }; + + pinctrl_usbotg1_pwr_gpio: usbotg1-pwr-gpio { + fsl,pins = < + MX7D_PAD_LPSR_GPIO1_IO05__GPIO1_IO5 0x04 + >; + }; + + pinctrl_usbotg2: usbotg2grp { + fsl,pins = < + MX7D_PAD_UART3_RTS_B__USB_OTG2_OC 0x04 + >; + }; + + pinctrl_usdhc1: usdhc1grp { + fsl,pins = < + MX7D_PAD_SD1_CD_B__GPIO5_IO0 0x59 + MX7D_PAD_SD1_CMD__SD1_CMD 0x59 + MX7D_PAD_SD1_CLK__SD1_CLK 0x19 + MX7D_PAD_SD1_DATA0__SD1_DATA0 0x59 + MX7D_PAD_SD1_DATA1__SD1_DATA1 0x59 + MX7D_PAD_SD1_DATA2__SD1_DATA2 0x59 + MX7D_PAD_SD1_DATA3__SD1_DATA3 0x59 + >; + }; + + pinctrl_usdhc2: usdhc2grp { + fsl,pins = < + MX7D_PAD_SD2_CLK__SD2_CLK 0x19 + MX7D_PAD_SD2_CMD__SD2_CMD 0x59 + MX7D_PAD_SD2_DATA0__SD2_DATA0 0x59 + MX7D_PAD_SD2_DATA1__SD2_DATA1 0x59 + MX7D_PAD_SD2_DATA2__SD2_DATA2 0x59 + MX7D_PAD_SD2_DATA3__SD2_DATA3 0x59 + MX7D_PAD_SD2_CD_B__SD2_CD_B 0x08 + >; + }; + + pinctrl_usdhc3: usdhc3grp { + fsl,pins = < + MX7D_PAD_SD3_CMD__SD3_CMD 0x5d + MX7D_PAD_SD3_CLK__SD3_CLK 0x1d + MX7D_PAD_SD3_DATA0__SD3_DATA0 0x5d + MX7D_PAD_SD3_DATA1__SD3_DATA1 0x5d + MX7D_PAD_SD3_DATA2__SD3_DATA2 0x5d + MX7D_PAD_SD3_DATA3__SD3_DATA3 0x5d + MX7D_PAD_SD3_DATA4__SD3_DATA4 0x5d + MX7D_PAD_SD3_DATA5__SD3_DATA5 0x5d + MX7D_PAD_SD3_DATA6__SD3_DATA6 0x5d + MX7D_PAD_SD3_DATA7__SD3_DATA7 0x5d + MX7D_PAD_SD3_STROBE__SD3_STROBE 0x1d + >; + }; + + pinctrl_usdhc3_100mhz: usdhc3-100mhzgrp { + fsl,pins = < + MX7D_PAD_SD3_CMD__SD3_CMD 0x5e + MX7D_PAD_SD3_CLK__SD3_CLK 0x1e + MX7D_PAD_SD3_DATA0__SD3_DATA0 0x5e + MX7D_PAD_SD3_DATA1__SD3_DATA1 0x5e + MX7D_PAD_SD3_DATA2__SD3_DATA2 0x5e + MX7D_PAD_SD3_DATA3__SD3_DATA3 0x5e + MX7D_PAD_SD3_DATA4__SD3_DATA4 0x5e + MX7D_PAD_SD3_DATA5__SD3_DATA5 0x5e + MX7D_PAD_SD3_DATA6__SD3_DATA6 0x5e + MX7D_PAD_SD3_DATA7__SD3_DATA7 0x5e + MX7D_PAD_SD3_STROBE__SD3_STROBE 0x1e + >; + }; + + pinctrl_usdhc3_200mhz: usdhc3-200mhzgrp { + fsl,pins = < + MX7D_PAD_SD3_CMD__SD3_CMD 0x5f + MX7D_PAD_SD3_CLK__SD3_CLK 0x0f + MX7D_PAD_SD3_DATA0__SD3_DATA0 0x5f + MX7D_PAD_SD3_DATA1__SD3_DATA1 0x5f + MX7D_PAD_SD3_DATA2__SD3_DATA2 0x5f + MX7D_PAD_SD3_DATA3__SD3_DATA3 0x5f + MX7D_PAD_SD3_DATA4__SD3_DATA4 0x5f + MX7D_PAD_SD3_DATA5__SD3_DATA5 0x5f + MX7D_PAD_SD3_DATA6__SD3_DATA6 0x5f + MX7D_PAD_SD3_DATA7__SD3_DATA7 0x5f + MX7D_PAD_SD3_STROBE__SD3_STROBE 0x1f + >; + }; + + pinctrl_wifi: wifigrp { + fsl,pins = < + MX7D_PAD_EPDC_PWR_COM__GPIO2_IO30 0x04 + MX7D_PAD_SD2_RESET_B__GPIO5_IO11 0x04 + >; + }; +}; + +&iomuxc_lpsr { + pinctrl_wdog: wdoggrp { + fsl,pins = < + MX7D_PAD_LPSR_GPIO1_IO00__WDOG1_WDOG_B 0x74 + >; + }; +}; diff --git a/arch/arm/boot/dts/imx7s.dtsi b/arch/arm/boot/dts/imx7s.dtsi index 5af6d58666f4..008e3da460f1 100644 --- a/arch/arm/boot/dts/imx7s.dtsi +++ b/arch/arm/boot/dts/imx7s.dtsi @@ -446,7 +446,7 @@ status = "disabled"; }; - iomuxc_lpsr: iomuxc-lpsr@302c0000 { + iomuxc_lpsr: pinctrl@302c0000 { compatible = "fsl,imx7d-iomuxc-lpsr"; reg = <0x302c0000 0x10000>; fsl,input-sel = <&iomuxc>; diff --git a/arch/arm/boot/dts/imxrt1050-evk.dts b/arch/arm/boot/dts/imxrt1050-evk.dts new file mode 100644 index 000000000000..6a9c10decf52 --- /dev/null +++ b/arch/arm/boot/dts/imxrt1050-evk.dts @@ -0,0 +1,72 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright (C) 2019 + * Author(s): Giulio Benetti <giulio.benetti@benettiengineering.com> + */ + +/dts-v1/; +#include "imxrt1050.dtsi" +#include "imxrt1050-pinfunc.h" + +/ { + model = "NXP IMXRT1050-evk board"; + compatible = "fsl,imxrt1050-evk", "fsl,imxrt1050"; + + chosen { + stdout-path = &lpuart1; + }; + + aliases { + gpio0 = &gpio1; + gpio1 = &gpio2; + gpio2 = &gpio3; + gpio3 = &gpio4; + gpio4 = &gpio5; + mmc0 = &usdhc1; + serial0 = &lpuart1; + }; + + memory@80000000 { + device_type = "memory"; + reg = <0x80000000 0x2000000>; + }; +}; + +&lpuart1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_lpuart1>; + status = "okay"; +}; + +&iomuxc { + pinctrl-names = "default"; + pinctrl_lpuart1: lpuart1grp { + fsl,pins = < + MXRT1050_IOMUXC_GPIO_AD_B0_12_LPUART1_TXD 0xf1 + MXRT1050_IOMUXC_GPIO_AD_B0_13_LPUART1_RXD 0xf1 + >; + }; + + pinctrl_usdhc0: usdhc0grp { + fsl,pins = < + MXRT1050_IOMUXC_GPIO_B1_12_USDHC1_CD_B 0x1B000 + MXRT1050_IOMUXC_GPIO_B1_14_USDHC1_VSELECT 0xB069 + MXRT1050_IOMUXC_GPIO_SD_B0_00_USDHC1_CMD 0x17061 + MXRT1050_IOMUXC_GPIO_SD_B0_01_USDHC1_CLK 0x17061 + MXRT1050_IOMUXC_GPIO_SD_B0_05_USDHC1_DATA3 0x17061 + MXRT1050_IOMUXC_GPIO_SD_B0_04_USDHC1_DATA2 0x17061 + MXRT1050_IOMUXC_GPIO_SD_B0_03_USDHC1_DATA1 0x17061 + MXRT1050_IOMUXC_GPIO_SD_B0_02_USDHC1_DATA0 0x17061 + >; + }; +}; + +&usdhc1 { + pinctrl-names = "default", "state_100mhz", "state_200mhz", "sleep"; + pinctrl-0 = <&pinctrl_usdhc0>; + pinctrl-1 = <&pinctrl_usdhc0>; + pinctrl-2 = <&pinctrl_usdhc0>; + pinctrl-3 = <&pinctrl_usdhc0>; + cd-gpios = <&gpio2 28 GPIO_ACTIVE_LOW>; + status = "okay"; +}; diff --git a/arch/arm/boot/dts/imxrt1050.dtsi b/arch/arm/boot/dts/imxrt1050.dtsi new file mode 100644 index 000000000000..77b911b06041 --- /dev/null +++ b/arch/arm/boot/dts/imxrt1050.dtsi @@ -0,0 +1,160 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright (C) 2019 + * Author(s): Giulio Benetti <giulio.benetti@benettiengineering.com> + */ + +#include "armv7-m.dtsi" +#include <dt-bindings/interrupt-controller/arm-gic.h> +#include <dt-bindings/clock/imxrt1050-clock.h> +#include <dt-bindings/gpio/gpio.h> + +/ { + #address-cells = <1>; + #size-cells = <1>; + + clocks { + osc: osc { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <24000000>; + }; + + osc3M: osc3M { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <3000000>; + }; + }; + + soc { + lpuart1: serial@40184000 { + compatible = "fsl,imxrt1050-lpuart", "fsl,imx7ulp-lpuart"; + reg = <0x40184000 0x4000>; + interrupts = <20>; + clocks = <&clks IMXRT1050_CLK_LPUART1>; + clock-names = "ipg"; + status = "disabled"; + }; + + iomuxc: pinctrl@401f8000 { + compatible = "fsl,imxrt1050-iomuxc"; + reg = <0x401f8000 0x4000>; + fsl,mux_mask = <0x7>; + }; + + anatop: anatop@400d8000 { + compatible = "fsl,imxrt-anatop"; + reg = <0x400d8000 0x4000>; + }; + + clks: clock-controller@400fc000 { + compatible = "fsl,imxrt1050-ccm"; + reg = <0x400fc000 0x4000>; + interrupts = <95>, <96>; + clocks = <&osc>; + clock-names = "osc"; + #clock-cells = <1>; + assigned-clocks = <&clks IMXRT1050_CLK_PLL1_BYPASS>, + <&clks IMXRT1050_CLK_PLL1_BYPASS>, + <&clks IMXRT1050_CLK_PLL2_BYPASS>, + <&clks IMXRT1050_CLK_PLL3_BYPASS>, + <&clks IMXRT1050_CLK_PLL3_PFD1_664_62M>, + <&clks IMXRT1050_CLK_PLL2_PFD2_396M>; + assigned-clock-parents = <&clks IMXRT1050_CLK_PLL1_REF_SEL>, + <&clks IMXRT1050_CLK_PLL1_ARM>, + <&clks IMXRT1050_CLK_PLL2_SYS>, + <&clks IMXRT1050_CLK_PLL3_USB_OTG>, + <&clks IMXRT1050_CLK_PLL3_USB_OTG>, + <&clks IMXRT1050_CLK_PLL2_SYS>; + }; + + edma1: dma-controller@400e8000 { + #dma-cells = <2>; + compatible = "fsl,imx7ulp-edma"; + reg = <0x400e8000 0x4000>, + <0x400ec000 0x4000>; + dma-channels = <32>; + interrupts = <0>, <1>, <2>, <3>, <4>, <5>, <6>, <7>, <8>, + <9>, <10>, <11>, <12>, <13>, <14>, <15>, <16>; + clock-names = "dma", "dmamux0"; + clocks = <&clks IMXRT1050_CLK_DMA>, + <&clks IMXRT1050_CLK_DMA_MUX>; + }; + + usdhc1: mmc@402c0000 { + compatible ="fsl,imxrt1050-usdhc", "fsl,imx6sl-usdhc"; + reg = <0x402c0000 0x4000>; + interrupts = <110>; + clocks = <&clks IMXRT1050_CLK_IPG_PDOF>, + <&clks IMXRT1050_CLK_OSC>, + <&clks IMXRT1050_CLK_USDHC1>; + clock-names = "ipg", "ahb", "per"; + bus-width = <4>; + fsl,wp-controller; + no-1-8-v; + max-frequency = <4000000>; + fsl,tuning-start-tap = <20>; + fsl,tuning-step= <2>; + status = "disabled"; + }; + + gpio1: gpio@401b8000 { + compatible = "fsl,imxrt1050-gpio", "fsl,imx35-gpio"; + reg = <0x401b8000 0x4000>; + interrupts = <80>, <81>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpio2: gpio@401bc000 { + compatible = "fsl,imxrt1050-gpio", "fsl,imx35-gpio"; + reg = <0x401bc000 0x4000>; + interrupts = <82>, <83>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpio3: gpio@401c0000 { + compatible = "fsl,imxrt1050-gpio", "fsl,imx35-gpio"; + reg = <0x401c0000 0x4000>; + interrupts = <84>, <85>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpio4: gpio@401c4000 { + compatible = "fsl,imxrt1050-gpio", "fsl,imx35-gpio"; + reg = <0x401c4000 0x4000>; + interrupts = <86>, <87>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpio5: gpio@400c0000 { + compatible = "fsl,imxrt1050-gpio", "fsl,imx35-gpio"; + reg = <0x400c0000 0x4000>; + interrupts = <88>, <89>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpt: timer@401ec000 { + compatible = "fsl,imxrt1050-gpt", "fsl,imx6dl-gpt", "fsl,imx6sl-gpt"; + reg = <0x401ec000 0x4000>; + interrupts = <100>; + clocks = <&osc3M>; + clock-names = "per"; + }; + }; +}; diff --git a/arch/arm/boot/dts/keystone-k2e-evm.dts b/arch/arm/boot/dts/keystone-k2e-evm.dts index 66fec5f5d081..5d6d074011df 100644 --- a/arch/arm/boot/dts/keystone-k2e-evm.dts +++ b/arch/arm/boot/dts/keystone-k2e-evm.dts @@ -137,10 +137,10 @@ }; &spi0 { - nor_flash: n25q128a11@0 { + nor_flash: flash@0 { #address-cells = <1>; #size-cells = <1>; - compatible = "Micron,n25q128a11"; + compatible = "micron,n25q128a11", "jedec,spi-nor"; spi-max-frequency = <54000000>; m25p,fast-read; reg = <0>; diff --git a/arch/arm/boot/dts/keystone-k2g-evm.dts b/arch/arm/boot/dts/keystone-k2g-evm.dts index d800f26b6275..88be868cf71e 100644 --- a/arch/arm/boot/dts/keystone-k2g-evm.dts +++ b/arch/arm/boot/dts/keystone-k2g-evm.dts @@ -392,7 +392,7 @@ pinctrl-0 = <&qspi_pins>; cdns,rclk-en; - flash0: m25p80@0 { + flash0: flash@0 { compatible = "s25fl512s", "jedec,spi-nor"; reg = <0>; spi-tx-bus-width = <1>; diff --git a/arch/arm/boot/dts/keystone-k2g-ice.dts b/arch/arm/boot/dts/keystone-k2g-ice.dts index 2a2d38cf0fff..bd84d7f0f2fe 100644 --- a/arch/arm/boot/dts/keystone-k2g-ice.dts +++ b/arch/arm/boot/dts/keystone-k2g-ice.dts @@ -325,7 +325,7 @@ cdns,rclk-en; status = "okay"; - flash0: m25p80@0 { + flash0: flash@0 { compatible = "s25fl256s1", "jedec,spi-nor"; reg = <0>; spi-tx-bus-width = <1>; diff --git a/arch/arm/boot/dts/keystone-k2hk-evm.dts b/arch/arm/boot/dts/keystone-k2hk-evm.dts index ad4e22afe133..4a91f5ded402 100644 --- a/arch/arm/boot/dts/keystone-k2hk-evm.dts +++ b/arch/arm/boot/dts/keystone-k2hk-evm.dts @@ -161,10 +161,10 @@ }; &spi0 { - nor_flash: n25q128a11@0 { + nor_flash: flash@0 { #address-cells = <1>; #size-cells = <1>; - compatible = "Micron,n25q128a11"; + compatible = "micron,n25q128a11", "jedec,spi-nor"; spi-max-frequency = <54000000>; m25p,fast-read; reg = <0>; diff --git a/arch/arm/boot/dts/keystone-k2l-evm.dts b/arch/arm/boot/dts/keystone-k2l-evm.dts index e200533d26a4..1c880cf8fa91 100644 --- a/arch/arm/boot/dts/keystone-k2l-evm.dts +++ b/arch/arm/boot/dts/keystone-k2l-evm.dts @@ -110,10 +110,10 @@ }; &spi0 { - nor_flash: n25q128a11@0 { + nor_flash: flash@0 { #address-cells = <1>; #size-cells = <1>; - compatible = "Micron,n25q128a11"; + compatible = "micron,n25q128a11", "jedec,spi-nor"; spi-max-frequency = <54000000>; m25p,fast-read; reg = <0>; diff --git a/arch/arm/boot/dts/kirkwood-dir665.dts b/arch/arm/boot/dts/kirkwood-dir665.dts index b3ad3f607d31..c32300611d2c 100644 --- a/arch/arm/boot/dts/kirkwood-dir665.dts +++ b/arch/arm/boot/dts/kirkwood-dir665.dts @@ -78,7 +78,7 @@ spi@10600 { status = "okay"; - m25p80@0 { + flash@0 { #address-cells = <1>; #size-cells = <1>; compatible = "mxicy,mx25l12805d", "jedec,spi-nor"; diff --git a/arch/arm/boot/dts/kirkwood-synology.dtsi b/arch/arm/boot/dts/kirkwood-synology.dtsi index 217bd374e52b..8f6c387d3a8b 100644 --- a/arch/arm/boot/dts/kirkwood-synology.dtsi +++ b/arch/arm/boot/dts/kirkwood-synology.dtsi @@ -198,7 +198,7 @@ spi@10600 { status = "okay"; - m25p80@0 { + flash@0 { #address-cells = <1>; #size-cells = <1>; compatible = "st,m25p80", "jedec,spi-nor"; diff --git a/arch/arm/boot/dts/lan966x-kontron-kswitch-d10-mmt-6g-2gs.dts b/arch/arm/boot/dts/lan966x-kontron-kswitch-d10-mmt-6g-2gs.dts new file mode 100644 index 000000000000..0f555eb45bda --- /dev/null +++ b/arch/arm/boot/dts/lan966x-kontron-kswitch-d10-mmt-6g-2gs.dts @@ -0,0 +1,94 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Device Tree file for the Kontron KSwitch D10 MMT 6G-2GS + */ + +/dts-v1/; +#include "lan966x-kontron-kswitch-d10-mmt.dtsi" + +/ { + model = "Kontron KSwitch D10 MMT 6G-2GS"; + compatible = "kontron,kswitch-d10-mmt-6g-2gs", "kontron,s1921", + "microchip,lan9668", "microchip,lan966"; + + aliases { + i2c0 = &i2c4; + i2c1 = &i2c1; + }; + + sfp0: sfp0 { + compatible = "sff,sfp"; + i2c-bus = <&i2c4>; + los-gpios = <&sgpio_in 1 0 GPIO_ACTIVE_HIGH>; + mod-def0-gpios = <&sgpio_in 1 1 GPIO_ACTIVE_LOW>; + maximum-power-milliwatt = <2500>; + tx-disable-gpios = <&sgpio_out 3 0 GPIO_ACTIVE_LOW>; + tx-fault-gpios = <&sgpio_in 0 2 GPIO_ACTIVE_HIGH>; + rate-select0-gpios = <&sgpio_out 2 0 GPIO_ACTIVE_HIGH>; + rate-select1-gpios = <&sgpio_out 2 1 GPIO_ACTIVE_HIGH>; + }; + + sfp1: sfp1 { + compatible = "sff,sfp"; + i2c-bus = <&i2c1>; + los-gpios = <&sgpio_in 1 2 GPIO_ACTIVE_HIGH>; + mod-def0-gpios = <&sgpio_in 1 3 GPIO_ACTIVE_LOW>; + maximum-power-milliwatt = <2500>; + tx-disable-gpios = <&sgpio_out 3 1 GPIO_ACTIVE_LOW>; + tx-fault-gpios = <&sgpio_in 0 3 GPIO_ACTIVE_HIGH>; + rate-select0-gpios = <&sgpio_out 2 2 GPIO_ACTIVE_HIGH>; + rate-select1-gpios = <&sgpio_out 2 3 GPIO_ACTIVE_HIGH>; + }; +}; + +&flx1 { + atmel,flexcom-mode = <ATMEL_FLEXCOM_MODE_TWI>; + status = "okay"; + + i2c1: i2c@600 { + pinctrl-0 = <&fc1_c_pins>; + pinctrl-names = "default"; + status = "okay"; + }; +}; + +&flx4 { + atmel,flexcom-mode = <ATMEL_FLEXCOM_MODE_TWI>; + status = "okay"; + + i2c4: i2c@600 { + pinctrl-0 = <&fc4_b_pins>; + pinctrl-names = "default"; + status = "okay"; + }; +}; + +&gpio { + fc1_c_pins: fc1-c-i2c-pins { + /* SCL, SDA */ + pins = "GPIO_47", "GPIO_48"; + function = "fc1_c"; + }; + + fc4_b_pins: fc4-b-i2c-pins { + /* SCL, SDA */ + pins = "GPIO_57", "GPIO_58"; + function = "fc4_b"; + }; +}; + +&port2 { + phys = <&serdes 2 SERDES6G(0)>; + sfp = <&sfp0>; + managed = "in-band-status"; + phy-mode = "sgmii"; + status = "okay"; +}; + +&port3 { + phys = <&serdes 3 SERDES6G(1)>; + sfp = <&sfp1>; + managed = "in-band-status"; + phy-mode = "sgmii"; + status = "okay"; +}; diff --git a/arch/arm/boot/dts/lan966x-kontron-kswitch-d10-mmt-8g.dts b/arch/arm/boot/dts/lan966x-kontron-kswitch-d10-mmt-8g.dts new file mode 100644 index 000000000000..5feef9a59a79 --- /dev/null +++ b/arch/arm/boot/dts/lan966x-kontron-kswitch-d10-mmt-8g.dts @@ -0,0 +1,39 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Device Tree file for the Kontron KSwitch D10 MMT 8G + */ + +/dts-v1/; +#include "lan966x-kontron-kswitch-d10-mmt.dtsi" + +/ { + model = "Kontron KSwitch D10 MMT 8G"; + compatible = "kontron,kswitch-d10-mmt-8g", "kontron,s1921", + "microchip,lan9668", "microchip,lan966"; +}; + +&mdio0 { + phy2: ethernet-phy@3 { + reg = <3>; + }; + + phy3: ethernet-phy@4 { + reg = <4>; + }; +}; + +&port2 { + phys = <&serdes 2 SERDES6G(0)>; + phy-handle = <&phy2>; + phy-mode = "sgmii"; + managed = "in-band-status"; + status = "okay"; +}; + +&port3 { + phys = <&serdes 3 SERDES6G(1)>; + phy-handle = <&phy3>; + phy-mode = "sgmii"; + managed = "in-band-status"; + status = "okay"; +}; diff --git a/arch/arm/boot/dts/lan966x-kontron-kswitch-d10-mmt.dtsi b/arch/arm/boot/dts/lan966x-kontron-kswitch-d10-mmt.dtsi new file mode 100644 index 000000000000..4cab1b3b3b29 --- /dev/null +++ b/arch/arm/boot/dts/lan966x-kontron-kswitch-d10-mmt.dtsi @@ -0,0 +1,190 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Common part of the device tree for the Kontron KSwitch D10 MMT + */ + +/dts-v1/; +#include "lan966x.dtsi" +#include "dt-bindings/phy/phy-lan966x-serdes.h" + +/ { + aliases { + serial0 = &usart0; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + gpio-restart { + compatible = "gpio-restart"; + gpios = <&gpio 56 GPIO_ACTIVE_LOW>; + priority = <200>; + }; +}; + +&flx0 { + atmel,flexcom-mode = <ATMEL_FLEXCOM_MODE_USART>; + status = "okay"; + + usart0: serial@200 { + pinctrl-0 = <&usart0_pins>; + pinctrl-names = "default"; + status = "okay"; + }; +}; + +&flx3 { + atmel,flexcom-mode = <ATMEL_FLEXCOM_MODE_SPI>; + status = "okay"; + + spi3: spi@400 { + pinctrl-0 = <&fc3_b_pins>; + pinctrl-names = "default"; + status = "okay"; + cs-gpios = <&gpio 46 GPIO_ACTIVE_LOW>; + }; +}; + +&gpio { + fc3_b_pins: fc3-b-pins { + /* SCK, MISO, MOSI */ + pins = "GPIO_51", "GPIO_52", "GPIO_53"; + function = "fc3_b"; + }; + + miim_c_pins: miim-c-pins { + /* MDC, MDIO */ + pins = "GPIO_59", "GPIO_60"; + function = "miim_c"; + }; + + sgpio_a_pins: sgpio-a-pins { + /* SCK, D0, D1 */ + pins = "GPIO_32", "GPIO_33", "GPIO_34"; + function = "sgpio_a"; + }; + + sgpio_b_pins: sgpio-b-pins { + /* LD */ + pins = "GPIO_64"; + function = "sgpio_b"; + }; + + usart0_pins: usart0-pins { + /* RXD, TXD */ + pins = "GPIO_25", "GPIO_26"; + function = "fc0_b"; + }; +}; + +&mdio0 { + pinctrl-0 = <&miim_c_pins>; + pinctrl-names = "default"; + reset-gpios = <&gpio 29 GPIO_ACTIVE_LOW>; + clock-frequency = <2500000>; + status = "okay"; + + phy4: ethernet-phy@5 { + reg = <5>; + coma-mode-gpios = <&gpio 37 GPIO_ACTIVE_HIGH>; + }; + + phy5: ethernet-phy@6 { + reg = <6>; + coma-mode-gpios = <&gpio 37 GPIO_ACTIVE_HIGH>; + }; + + phy6: ethernet-phy@7 { + reg = <7>; + coma-mode-gpios = <&gpio 37 GPIO_ACTIVE_HIGH>; + }; + + phy7: ethernet-phy@8 { + reg = <8>; + coma-mode-gpios = <&gpio 37 GPIO_ACTIVE_HIGH>; + }; +}; + +&mdio1 { + status = "okay"; +}; + +&phy0 { + status = "okay"; +}; + +&phy1 { + status = "okay"; +}; + +&port0 { + phys = <&serdes 0 CU(0)>; + phy-handle = <&phy0>; + phy-mode = "gmii"; + status = "okay"; +}; + +&port1 { + phys = <&serdes 1 CU(1)>; + phy-handle = <&phy1>; + phy-mode = "gmii"; + status = "okay"; +}; + +&port4 { + phys = <&serdes 4 SERDES6G(2)>; + phy-handle = <&phy4>; + phy-mode = "qsgmii"; + status = "okay"; +}; + +&port5 { + phys = <&serdes 5 SERDES6G(2)>; + phy-handle = <&phy5>; + phy-mode = "qsgmii"; + status = "okay"; +}; + +&port6 { + phys = <&serdes 6 SERDES6G(2)>; + phy-handle = <&phy6>; + phy-mode = "qsgmii"; + status = "okay"; +}; + +&port7 { + phys = <&serdes 7 SERDES6G(2)>; + phy-handle = <&phy7>; + phy-mode = "qsgmii"; + status = "okay"; +}; + +&serdes { + status = "okay"; +}; + +&sgpio { + pinctrl-0 = <&sgpio_a_pins>, <&sgpio_b_pins>; + pinctrl-names = "default"; + bus-frequency = <8000000>; + /* arbitrary range because all GPIOs are in software mode */ + microchip,sgpio-port-ranges = <0 11>; + status = "okay"; + + sgpio_in: gpio@0 { + ngpios = <128>; + }; + + sgpio_out: gpio@1 { + ngpios = <128>; + }; +}; + +&switch { + status = "okay"; +}; + +&watchdog { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/lan966x-pcb8291.dts b/arch/arm/boot/dts/lan966x-pcb8291.dts index 3281af90ac6d..3c7e3a7d6f14 100644 --- a/arch/arm/boot/dts/lan966x-pcb8291.dts +++ b/arch/arm/boot/dts/lan966x-pcb8291.dts @@ -35,7 +35,7 @@ function = "fc3_b"; }; - can0_b_pins: can0_b_pins { + can0_b_pins: can0-b-pins { /* RX, TX */ pins = "GPIO_35", "GPIO_36"; function = "can0_b"; diff --git a/arch/arm/boot/dts/lan966x.dtsi b/arch/arm/boot/dts/lan966x.dtsi index 7d2869648050..3cb02fffe716 100644 --- a/arch/arm/boot/dts/lan966x.dtsi +++ b/arch/arm/boot/dts/lan966x.dtsi @@ -84,6 +84,68 @@ #size-cells = <1>; ranges; + switch: switch@e0000000 { + compatible = "microchip,lan966x-switch"; + reg = <0xe0000000 0x0100000>, + <0xe2000000 0x0800000>; + reg-names = "cpu", "gcb"; + interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "xtr", "fdma", "ana", "ptp", + "ptp-ext"; + resets = <&reset 0>; + reset-names = "switch"; + status = "disabled"; + + ethernet-ports { + #address-cells = <1>; + #size-cells = <0>; + + port0: port@0 { + reg = <0>; + status = "disabled"; + }; + + port1: port@1 { + reg = <1>; + status = "disabled"; + }; + + port2: port@2 { + reg = <2>; + status = "disabled"; + }; + + port3: port@3 { + reg = <3>; + status = "disabled"; + }; + + port4: port@4 { + reg = <4>; + status = "disabled"; + }; + + port5: port@5 { + reg = <5>; + status = "disabled"; + }; + + port6: port@6 { + reg = <6>; + status = "disabled"; + }; + + port7: port@7 { + reg = <7>; + status = "disabled"; + }; + }; + }; + flx0: flexcom@e0040000 { compatible = "atmel,sama5d2-flexcom"; reg = <0xe0040000 0x100>; @@ -92,6 +154,47 @@ #size-cells = <1>; ranges = <0x0 0xe0040000 0x800>; status = "disabled"; + + usart0: serial@200 { + compatible = "atmel,at91sam9260-usart"; + reg = <0x200 0x200>; + interrupts = <GIC_SPI 48 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&dma0 AT91_XDMAC_DT_PERID(3)>, + <&dma0 AT91_XDMAC_DT_PERID(2)>; + dma-names = "tx", "rx"; + clocks = <&nic_clk>; + clock-names = "usart"; + atmel,fifo-size = <32>; + status = "disabled"; + }; + + spi0: spi@400 { + compatible = "atmel,at91rm9200-spi"; + reg = <0x400 0x200>; + interrupts = <GIC_SPI 48 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&dma0 AT91_XDMAC_DT_PERID(3)>, + <&dma0 AT91_XDMAC_DT_PERID(2)>; + dma-names = "tx", "rx"; + clocks = <&nic_clk>; + clock-names = "spi_clk"; + atmel,fifo-size = <32>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + i2c0: i2c@600 { + compatible = "microchip,sam9x60-i2c"; + reg = <0x600 0x200>; + interrupts = <GIC_SPI 48 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&dma0 AT91_XDMAC_DT_PERID(3)>, + <&dma0 AT91_XDMAC_DT_PERID(2)>; + dma-names = "tx", "rx"; + clocks = <&nic_clk>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; }; flx1: flexcom@e0044000 { @@ -102,6 +205,47 @@ #size-cells = <1>; ranges = <0x0 0xe0044000 0x800>; status = "disabled"; + + usart1: serial@200 { + compatible = "atmel,at91sam9260-usart"; + reg = <0x200 0x200>; + interrupts = <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&dma0 AT91_XDMAC_DT_PERID(5)>, + <&dma0 AT91_XDMAC_DT_PERID(4)>; + dma-names = "tx", "rx"; + clocks = <&nic_clk>; + clock-names = "usart"; + atmel,fifo-size = <32>; + status = "disabled"; + }; + + spi1: spi@400 { + compatible = "atmel,at91rm9200-spi"; + reg = <0x400 0x200>; + interrupts = <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&dma0 AT91_XDMAC_DT_PERID(5)>, + <&dma0 AT91_XDMAC_DT_PERID(4)>; + dma-names = "tx", "rx"; + clocks = <&nic_clk>; + clock-names = "spi_clk"; + atmel,fifo-size = <32>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + i2c1: i2c@600 { + compatible = "microchip,sam9x60-i2c"; + reg = <0x600 0x200>; + interrupts = <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&dma0 AT91_XDMAC_DT_PERID(5)>, + <&dma0 AT91_XDMAC_DT_PERID(4)>; + dma-names = "tx", "rx"; + clocks = <&nic_clk>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; }; trng: rng@e0048000 { @@ -114,9 +258,9 @@ compatible = "atmel,at91sam9g46-aes"; reg = <0xe004c000 0x100>; interrupts = <GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>; - dmas = <&dma0 AT91_XDMAC_DT_PERID(13)>, - <&dma0 AT91_XDMAC_DT_PERID(12)>; - dma-names = "rx", "tx"; + dmas = <&dma0 AT91_XDMAC_DT_PERID(12)>, + <&dma0 AT91_XDMAC_DT_PERID(13)>; + dma-names = "tx", "rx"; clocks = <&nic_clk>; clock-names = "aes_clk"; }; @@ -129,6 +273,47 @@ #size-cells = <1>; ranges = <0x0 0xe0060000 0x800>; status = "disabled"; + + usart2: serial@200 { + compatible = "atmel,at91sam9260-usart"; + reg = <0x200 0x200>; + interrupts = <GIC_SPI 50 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&dma0 AT91_XDMAC_DT_PERID(7)>, + <&dma0 AT91_XDMAC_DT_PERID(6)>; + dma-names = "tx", "rx"; + clocks = <&nic_clk>; + clock-names = "usart"; + atmel,fifo-size = <32>; + status = "disabled"; + }; + + spi2: spi@400 { + compatible = "atmel,at91rm9200-spi"; + reg = <0x400 0x200>; + interrupts = <GIC_SPI 50 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&dma0 AT91_XDMAC_DT_PERID(7)>, + <&dma0 AT91_XDMAC_DT_PERID(6)>; + dma-names = "tx", "rx"; + clocks = <&nic_clk>; + clock-names = "spi_clk"; + atmel,fifo-size = <32>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + i2c2: i2c@600 { + compatible = "microchip,sam9x60-i2c"; + reg = <0x600 0x200>; + interrupts = <GIC_SPI 50 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&dma0 AT91_XDMAC_DT_PERID(7)>, + <&dma0 AT91_XDMAC_DT_PERID(6)>; + dma-names = "tx", "rx"; + clocks = <&nic_clk>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; }; flx3: flexcom@e0064000 { @@ -144,11 +329,42 @@ compatible = "atmel,at91sam9260-usart"; reg = <0x200 0x200>; interrupts = <GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&dma0 AT91_XDMAC_DT_PERID(9)>, + <&dma0 AT91_XDMAC_DT_PERID(8)>; + dma-names = "tx", "rx"; clocks = <&nic_clk>; clock-names = "usart"; atmel,fifo-size = <32>; status = "disabled"; }; + + spi3: spi@400 { + compatible = "atmel,at91rm9200-spi"; + reg = <0x400 0x200>; + interrupts = <GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&dma0 AT91_XDMAC_DT_PERID(9)>, + <&dma0 AT91_XDMAC_DT_PERID(8)>; + dma-names = "tx", "rx"; + clocks = <&nic_clk>; + clock-names = "spi_clk"; + atmel,fifo-size = <32>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + i2c3: i2c@600 { + compatible = "microchip,sam9x60-i2c"; + reg = <0x600 0x200>; + interrupts = <GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&dma0 AT91_XDMAC_DT_PERID(9)>, + <&dma0 AT91_XDMAC_DT_PERID(8)>; + dma-names = "tx", "rx"; + clocks = <&nic_clk>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; }; dma0: dma-controller@e0068000 { @@ -178,6 +394,47 @@ #size-cells = <1>; ranges = <0x0 0xe0070000 0x800>; status = "disabled"; + + usart4: serial@200 { + compatible = "atmel,at91sam9260-usart"; + reg = <0x200 0x200>; + interrupts = <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&dma0 AT91_XDMAC_DT_PERID(11)>, + <&dma0 AT91_XDMAC_DT_PERID(10)>; + dma-names = "tx", "rx"; + clocks = <&nic_clk>; + clock-names = "usart"; + atmel,fifo-size = <32>; + status = "disabled"; + }; + + spi4: spi@400 { + compatible = "atmel,at91rm9200-spi"; + reg = <0x400 0x200>; + interrupts = <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&dma0 AT91_XDMAC_DT_PERID(11)>, + <&dma0 AT91_XDMAC_DT_PERID(10)>; + dma-names = "tx", "rx"; + clocks = <&nic_clk>; + clock-names = "spi_clk"; + atmel,fifo-size = <32>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + i2c4: i2c@600 { + compatible = "microchip,sam9x60-i2c"; + reg = <0x600 0x200>; + interrupts = <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&dma0 AT91_XDMAC_DT_PERID(11)>, + <&dma0 AT91_XDMAC_DT_PERID(10)>; + dma-names = "tx", "rx"; + clocks = <&nic_clk>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; }; timer0: timer@e008c000 { @@ -196,6 +453,11 @@ status = "disabled"; }; + cpu_ctrl: syscon@e00c0000 { + compatible = "microchip,lan966x-cpu-syscon", "syscon"; + reg = <0xe00c0000 0x350>; + }; + can0: can@e081c000 { compatible = "bosch,m_can"; reg = <0xe081c000 0xfc>, <0x00100000 0x4000>; @@ -211,10 +473,20 @@ status = "disabled"; }; + reset: reset-controller@e200400c { + compatible = "microchip,lan966x-switch-reset"; + reg = <0xe200400c 0x4>; + reg-names = "gcb"; + #reset-cells = <1>; + cpu-syscon = <&cpu_ctrl>; + }; + gpio: pinctrl@e2004064 { compatible = "microchip,lan966x-pinctrl"; reg = <0xe2004064 0xb4>, <0xe2010024 0x138>; + resets = <&reset 0>; + reset-names = "switch"; gpio-controller; #gpio-cells = <2>; gpio-ranges = <&gpio 0 0 78>; @@ -223,6 +495,81 @@ #interrupt-cells = <2>; }; + mdio0: mdio@e2004118 { + compatible = "microchip,lan966x-miim"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0xe2004118 0x24>; + clocks = <&sys_clk>; + status = "disabled"; + }; + + mdio1: mdio@e200413c { + compatible = "microchip,lan966x-miim"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0xe200413c 0x24>, + <0xe2010020 0x4>; + clocks = <&sys_clk>; + status = "disabled"; + + phy0: ethernet-phy@1 { + reg = <1>; + interrupts = <GIC_SPI 81 IRQ_TYPE_LEVEL_HIGH>; + status = "disabled"; + }; + + phy1: ethernet-phy@2 { + reg = <2>; + interrupts = <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>; + status = "disabled"; + }; + }; + + sgpio: gpio@e2004190 { + compatible = "microchip,sparx5-sgpio"; + reg = <0xe2004190 0x118>; + clocks = <&sys_clk>; + resets = <&reset 0>; + reset-names = "switch"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + + sgpio_in: gpio@0 { + compatible = "microchip,sparx5-sgpio-bank"; + reg = <0>; + gpio-controller; + #gpio-cells = <3>; + interrupts = <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>; + interrupt-controller; + #interrupt-cells = <3>; + }; + + sgpio_out: gpio@1 { + compatible = "microchip,sparx5-sgpio-bank"; + reg = <1>; + gpio-controller; + #gpio-cells = <3>; + }; + }; + + hwmon: hwmon@e2010180 { + compatible = "microchip,lan9668-hwmon"; + reg = <0xe2010180 0xc>, + <0xe20042a8 0xc>; + reg-names = "pvt", "fan"; + clocks = <&sys_clk>; + }; + + serdes: serdes@e202c000 { + compatible = "microchip,lan966x-serdes"; + reg = <0xe202c000 0x9c>, + <0xe2004010 0x4>; + #phy-cells = <2>; + status = "disabled"; + }; + gic: interrupt-controller@e8c11000 { compatible = "arm,gic-400", "arm,cortex-a7-gic"; #interrupt-cells = <3>; diff --git a/arch/arm/boot/dts/logicpd-som-lv.dtsi b/arch/arm/boot/dts/logicpd-som-lv.dtsi index 55b619c99e24..9ba0ea4eb48a 100644 --- a/arch/arm/boot/dts/logicpd-som-lv.dtsi +++ b/arch/arm/boot/dts/logicpd-som-lv.dtsi @@ -27,6 +27,8 @@ /* HS USB Host PHY on PORT 1 */ hsusb2_phy: hsusb2_phy { + pinctrl-names = "default"; + pinctrl-0 = <&hsusb2_reset_pin>; compatible = "usb-nop-xceiv"; reset-gpios = <&gpio1 4 GPIO_ACTIVE_LOW>; /* gpio_4 */ #phy-cells = <0>; @@ -144,6 +146,8 @@ }; &usbhshost { + pinctrl-names = "default"; + pinctrl-0 = <&hsusb2_pins>; port2-mode = "ehci-phy"; }; @@ -151,10 +155,7 @@ phys = <0 &hsusb2_phy>; }; - &omap3_pmx_core { - pinctrl-names = "default"; - pinctrl-0 = <&hsusb2_pins>; mmc3_pins: pinmux_mm3_pins { pinctrl-single,pins = < @@ -250,8 +251,7 @@ }; &omap3_pmx_wkup { - pinctrl-names = "default"; - pinctrl-0 = <&hsusb2_reset_pin>; + hsusb2_reset_pin: pinmux_hsusb1_reset_pin { pinctrl-single,pins = < OMAP3_WKUP_IOPAD(0x2a0e, PIN_OUTPUT | MUX_MODE4) /* sys_boot2.gpio_4 */ diff --git a/arch/arm/boot/dts/ls1021a-iot.dts b/arch/arm/boot/dts/ls1021a-iot.dts new file mode 100644 index 000000000000..66bcdaf4b6f9 --- /dev/null +++ b/arch/arm/boot/dts/ls1021a-iot.dts @@ -0,0 +1,227 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Copyright 2021-2022 NXP + * + */ + +/dts-v1/; +#include "ls1021a.dtsi" + +/ { + model = "LS1021A-IOT Board"; + compatible = "fsl,ls1021a-iot", "fsl,ls1021a"; + + sys_mclk: clock-mclk { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <24576000>; + }; + + reg_3p3v: regulator-3V3 { + compatible = "regulator-fixed"; + regulator-name = "3P3V"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + + reg_2p5v: regulator-2V5 { + compatible = "regulator-fixed"; + regulator-name = "2P5V"; + regulator-min-microvolt = <2500000>; + regulator-max-microvolt = <2500000>; + regulator-always-on; + }; + + sound { + compatible = "simple-audio-card"; + simple-audio-card,format = "i2s"; + simple-audio-card,widgets = + "Microphone", "Microphone Jack", + "Headphone", "Headphone Jack", + "Speaker", "Speaker Ext", + "Line", "Line In Jack"; + simple-audio-card,routing = + "MIC_IN", "Microphone Jack", + "Microphone Jack", "Mic Bias", + "LINE_IN", "Line In Jack", + "Headphone Jack", "HP_OUT", + "Speaker Ext", "LINE_OUT"; + + simple-audio-card,cpu { + sound-dai = <&sai2>; + frame-master; + bitclock-master; + }; + + simple-audio-card,codec { + sound-dai = <&sgtl5000>; + frame-master; + bitclock-master; + }; + }; +}; + +&can0{ + status = "disabled"; +}; + +&can1{ + status = "disabled"; +}; + +&can2{ + status = "disabled"; +}; + +&can3{ + status = "okay"; +}; + +&dcu { + display = <&display>; + status = "okay"; + + display: display@0 { + bits-per-pixel = <24>; + + display-timings { + native-mode = <&timing0>; + + timing0: mode0 { + clock-frequency = <25000000>; + hactive = <640>; + vactive = <480>; + hback-porch = <80>; + hfront-porch = <80>; + vback-porch = <16>; + vfront-porch = <16>; + hsync-len = <12>; + vsync-len = <2>; + hsync-active = <1>; + vsync-active = <1>; + }; + }; + }; +}; + +&enet0 { + tbi-handle = <&tbi1>; + phy-handle = <&phy1>; + phy-connection-type = "sgmii"; + status = "okay"; +}; + +&enet1 { + tbi-handle = <&tbi1>; + phy-handle = <&phy3>; + phy-connection-type = "sgmii"; + status = "okay"; +}; + +&enet2 { + fixed-link = <0 1 1000 0 0>; + phy-connection-type = "rgmii-id"; + status = "okay"; +}; + +&esdhc{ + status = "okay"; +}; + +&i2c0 { + status = "okay"; + + pca9555: gpio@23 { + compatible = "nxp,pca9555"; + reg = <0x23>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + + sgtl5000: audio-codec@2a { + #sound-dai-cells=<0x0>; + compatible = "fsl,sgtl5000"; + reg = <0x2a>; + VDDA-supply = <®_3p3v>; + VDDIO-supply = <®_2p5v>; + clocks = <&sys_mclk>; + }; + + max1239: adc@35 { + compatible = "maxim,max1239"; + reg = <0x35>; + #io-channel-cells = <1>; + }; + + ina2201: core-monitor@44 { + compatible = "ti,ina220"; + reg = <0x44>; + shunt-resistor = <1000>; + }; + + ina2202: current-monitor@45 { + compatible = "ti,ina220"; + reg = <0x45>; + shunt-resistor = <1000>; + }; + + lm75b: thermal-monitor@48 { + compatible = "national,lm75b"; + reg = <0x48>; + }; +}; + +&lpuart0 { + status = "okay"; +}; + +&mdio0 { + phy0: ethernet-phy@0 { + reg = <0x0>; + }; + + phy1: ethernet-phy@1 { + reg = <0x1>; + }; + + phy2: ethernet-phy@2 { + reg = <0x2>; + }; + + phy3: ethernet-phy@3 { + reg = <0x3>; + }; + + tbi1: tbi-phy@1f { + reg = <0x1f>; + device_type = "tbi-phy"; + }; +}; + +&qspi { + num-cs = <2>; + status = "okay"; + + s25fl128s: flash@0 { + compatible = "jedec,spi-nor"; + #address-cells = <1>; + #size-cells = <1>; + spi-max-frequency = <20000000>; + reg = <0>; + }; +}; + +&sai2 { + status = "okay"; +}; + +&uart0 { + status = "okay"; +}; + +&uart1 { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/ls1021a.dtsi b/arch/arm/boot/dts/ls1021a.dtsi index 2e69d6eab4d1..6c88be2a7e8e 100644 --- a/arch/arm/boot/dts/ls1021a.dtsi +++ b/arch/arm/boot/dts/ls1021a.dtsi @@ -122,8 +122,8 @@ interrupts = <GIC_SPI 180 IRQ_TYPE_LEVEL_HIGH>; }; - ifc: ifc@1530000 { - compatible = "fsl,ifc", "simple-bus"; + ifc: memory-controller@1530000 { + compatible = "fsl,ifc"; reg = <0x0 0x1530000 0x0 0x10000>; interrupts = <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>; status = "disabled"; @@ -192,7 +192,7 @@ <3 0 &gic GIC_SPI 167 IRQ_TYPE_LEVEL_HIGH>, <4 0 &gic GIC_SPI 168 IRQ_TYPE_LEVEL_HIGH>, <5 0 &gic GIC_SPI 169 IRQ_TYPE_LEVEL_HIGH>; - interrupt-map-mask = <0xffffffff 0x0>; + interrupt-map-mask = <0x7 0x0>; }; }; diff --git a/arch/arm/boot/dts/mba6ulx.dtsi b/arch/arm/boot/dts/mba6ulx.dtsi new file mode 100644 index 000000000000..aac42df9ecf6 --- /dev/null +++ b/arch/arm/boot/dts/mba6ulx.dtsi @@ -0,0 +1,569 @@ +// SPDX-License-Identifier: (GPL-2.0-or-later OR MIT) +/* + * Copyright 2018-2022 TQ-Systems GmbH + * Author: Markus Niebel <Markus.Niebel@tq-group.com> + */ + +/ { + model = "TQ-Systems MBA6ULx Baseboard"; + + aliases { + mmc0 = &usdhc2; + mmc1 = &usdhc1; + rtc0 = &rtc0; + rtc1 = &snvs_rtc; + }; + + chosen { + stdout-path = &uart1; + }; + + backlight: backlight { + compatible = "pwm-backlight"; + power-supply = <®_mba6ul_3v3>; + enable-gpios = <&expander_out0 4 GPIO_ACTIVE_HIGH>; + status = "disabled"; + }; + + beeper: beeper { + compatible = "gpio-beeper"; + gpios = <&expander_out1 6 GPIO_ACTIVE_HIGH>; + }; + + gpio_buttons: gpio-keys { + compatible = "gpio-keys"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_buttons>; + + button1 { + label = "s14"; + linux,code = <KEY_1>; + gpios = <&expander_in0 0 GPIO_ACTIVE_LOW>; + }; + + button2 { + label = "s6"; + linux,code = <KEY_2>; + gpios = <&expander_in0 1 GPIO_ACTIVE_LOW>; + }; + + button3 { + label = "s7"; + linux,code = <KEY_3>; + gpios = <&expander_in0 2 GPIO_ACTIVE_LOW>; + }; + + power-button { + label = "POWER"; + linux,code = <KEY_POWER>; + gpios = <&gpio1 3 GPIO_ACTIVE_LOW>; + gpio-key,wakeup; + }; + }; + + gpio-leds { + compatible = "gpio-leds"; + status = "okay"; + + led1 { + label = "led1"; + gpios = <&expander_out1 4 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "default-on"; + }; + + led2 { + label = "led2"; + gpios = <&expander_out1 5 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "heartbeat"; + }; + }; + + reg_lcd_pwr: regulator-lcd-pwr { + compatible = "regulator-fixed"; + regulator-name = "lcd-pwr"; + gpio = <&expander_out0 1 GPIO_ACTIVE_HIGH>; + enable-active-high; + status = "disabled"; + }; + + reg_mba6ul_3v3: regulator-mba6ul-3v3 { + compatible = "regulator-fixed"; + regulator-name = "supply-mba6ul-3v3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + + reg_mba6ul_5v0: regulator-mba6ul-5v0 { + compatible = "regulator-fixed"; + regulator-name = "supply-mba6ul-5v0"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + regulator-always-on; + }; + + reg_mpcie: regulator-mpcie-3v3 { + compatible = "regulator-fixed"; + regulator-name = "mpcie-3v3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + gpio = <&expander_out0 2 GPIO_ACTIVE_HIGH>; + enable-active-high; + regulator-always-on; + startup-delay-us = <500000>; + vin-supply = <®_mba6ul_3v3>; + }; + + reg_otg2vbus_5v0: regulator-otg2-vbus-5v0 { + compatible = "regulator-fixed"; + gpio = <&expander_out1 0 GPIO_ACTIVE_HIGH>; + enable-active-high; + regulator-name = "otg2-vbus-supply-5v0"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + vin-supply = <®_mpcie>; + }; + + reserved-memory { + #address-cells = <1>; + #size-cells = <1>; + ranges; + + linux,cma { + compatible = "shared-dma-pool"; + reusable; + size = <0x6000000>; + linux,cma-default; + }; + }; + + sound { + compatible = "fsl,imx-audio-tlv320aic32x4"; + model = "imx-audio-tlv320aic32x4"; + ssi-controller = <&sai1>; + audio-codec = <&tlv320aic32x4>; + audio-asrc = <&asrc>; + }; +}; + +&can1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_flexcan1>; + xceiver-supply = <®_mba6ul_3v3>; + status = "okay"; +}; + +&can2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_flexcan2>; + xceiver-supply = <®_mba6ul_3v3>; + status = "okay"; +}; + +&clks { + assigned-clocks = <&clks IMX6UL_CLK_PLL4_AUDIO_DIV>; + assigned-clock-rates = <768000000>; +}; + +&ecspi2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_ecspi2>; + num-cs = <1>; + status = "okay"; +}; + +&fec1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_enet1>; + phy-mode = "rmii"; + phy-handle = <ðphy0>; + phy-supply = <®_mba6ul_3v3>; + phy-reset-gpios = <&expander_out1 1 GPIO_ACTIVE_LOW>; + phy-reset-duration = <25>; + phy-reset-post-delay = <1>; + status = "okay"; +}; + +&fec2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_enet2>, <&pinctrl_enet2_mdc>; + phy-mode = "rmii"; + phy-handle = <ðphy1>; + phy-supply = <®_mba6ul_3v3>; + phy-reset-gpios = <&expander_out1 2 GPIO_ACTIVE_LOW>; + phy-reset-duration = <25>; + phy-reset-post-delay = <1>; + status = "okay"; + + mdio { + #address-cells = <1>; + #size-cells = <0>; + + ethphy0: ethernet-phy@0 { + compatible = "ethernet-phy-ieee802.3-c22"; + clocks = <&clks IMX6UL_CLK_ENET_REF>; + reg = <0>; + max-speed = <100>; + }; + + ethphy1: ethernet-phy@1 { + compatible = "ethernet-phy-ieee802.3-c22"; + clocks = <&clks IMX6UL_CLK_ENET2_REF_125M>; + reg = <1>; + max-speed = <100>; + }; + }; +}; + +&i2c4 { + tlv320aic32x4: audio-codec@18 { + compatible = "ti,tlv320aic32x4"; + reg = <0x18>; + clocks = <&clks IMX6UL_CLK_SAI1>; + clock-names = "mclk"; + ldoin-supply = <®_mba6ul_3v3>; + iov-supply = <®_mba6ul_3v3>; + }; + + jc42: temperature-sensor@19 { + compatible = "nxp,se97", "jedec,jc-42.4-temp"; + reg = <0x19>; + }; + + expander_out0: gpio-expander@20 { + compatible = "nxp,pca9554"; + reg = <0x20>; + gpio-controller; + #gpio-cells = <2>; + }; + + expander_in0: gpio-expander@21 { + compatible = "nxp,pca9554"; + reg = <0x21>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_expander_in0>; + interrupt-parent = <&gpio4>; + interrupts = <23 IRQ_TYPE_LEVEL_LOW>; + interrupt-controller; + #interrupt-cells = <2>; + gpio-controller; + #gpio-cells = <2>; + + enet1_int-hog { + gpio-hog; + gpios = <6 0>; + input; + }; + + enet2_int-hog { + gpio-hog; + gpios = <7 0>; + input; + }; + }; + + expander_out1: gpio-expander@22 { + compatible = "nxp,pca9554"; + reg = <0x22>; + gpio-controller; + #gpio-cells = <2>; + }; + + analog_touch: touchscreen@41 { + compatible = "st,stmpe811"; + reg = <0x41>; + interrupts = <21 IRQ_TYPE_EDGE_FALLING>; + interrupt-parent = <&gpio4>; + interrupt-controller; + status = "disabled"; + + stmpe_touchscreen { + compatible = "st,stmpe-ts"; + st,adc-freq = <1>; /* 3.25 MHz ADC clock speed */ + st,ave-ctrl = <3>; /* 8 sample average control */ + st,fraction-z = <7>; /* 7 length fractional part in z */ + /* + * 50 mA typical 80 mA max touchscreen drivers + * current limit value + */ + st,i-drive = <1>; + st,mod-12b = <1>; /* 12-bit ADC */ + st,ref-sel = <0>; /* internal ADC reference */ + st,sample-time = <4>; /* ADC converstion time: 80 clocks */ + st,settling = <3>; /* 1 ms panel driver settling time */ + st,touch-det-delay = <5>; /* 5 ms touch detect interrupt delay */ + }; + }; + + /* NXP SE97BTP with temperature sensor + eeprom */ + se97b: eeprom@51 { + compatible = "nxp,se97b", "atmel,24c02"; + reg = <0x51>; + pagesize = <16>; + }; +}; + +&pwm2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pwm2>; + status = "okay"; +}; + +&sai1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_sai1>; + assigned-clocks = <&clks IMX6UL_CLK_SAI1_SEL>, + <&clks IMX6UL_CLK_SAI1>; + assigned-clock-parents = <&clks IMX6UL_CLK_PLL4_AUDIO_DIV>; + assigned-clock-rates = <0>, <24000000>; + fsl,sai-mclk-direction-output; + status = "okay"; +}; + +&uart1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart1>; + status = "okay"; +}; + +&uart3 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart3>; + status = "okay"; +}; + +&uart6 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart6>; + /* for DTE mode, add below change */ + /* fsl,dte-mode; */ + /* pinctrl-0 = <&pinctrl_uart6dte>; */ + uart-has-rtscts; + linux,rs485-enabled-at-boot-time; + rs485-rts-active-low; + rs485-rx-during-tx; + status = "okay"; +}; + +/* otg-port */ +&usbotg1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usb_otg1>; + power-active-high; + over-current-active-low; + /* we implement only dual role but not a fully featured OTG */ + hnp-disable; + srp-disable; + adp-disable; + dr_mode = "otg"; + status = "okay"; +}; + +/* 7-port usb hub */ +/* id, pwr, oc pins not connected */ +&usbotg2 { + disable-over-current; + vbus-supply = <®_otg2vbus_5v0>; + dr_mode = "host"; + status = "okay"; +}; + +&usdhc1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usdhc1>; + cd-gpios = <&gpio1 19 GPIO_ACTIVE_LOW>; + wp-gpios = <&gpio1 18 GPIO_ACTIVE_HIGH>; + bus-width = <4>; + vmmc-supply = <®_mba6ul_3v3>; + vqmmc-supply = <®_vccsd>; + no-1-8-v; + no-mmc; + no-sdio; + status = "okay"; +}; + +&wdog1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_wdog1>; + fsl,ext-reset-output; + status = "okay"; +}; + +&iomuxc { + pinctrl_buttons: buttonsgrp { + fsl,pins = < + MX6UL_PAD_GPIO1_IO03__GPIO1_IO03 0x100b0 + >; + }; + + pinctrl_ecspi2: ecspi2grp { + fsl,pins = < + MX6UL_PAD_UART4_TX_DATA__ECSPI2_SCLK 0x1b020 + MX6UL_PAD_UART5_RX_DATA__ECSPI2_MISO 0x1b020 + MX6UL_PAD_UART5_TX_DATA__ECSPI2_MOSI 0x1b020 + MX6UL_PAD_UART4_RX_DATA__ECSPI2_SS0 0x1b020 + >; + }; + + pinctrl_enet1: enet1grp { + fsl,pins = < + MX6UL_PAD_ENET1_RX_EN__ENET1_RX_EN 0x1b0b0 + MX6UL_PAD_ENET1_RX_ER__ENET1_RX_ER 0x1b0b0 + MX6UL_PAD_ENET1_RX_DATA0__ENET1_RDATA00 0x1b0b0 + MX6UL_PAD_ENET1_RX_DATA1__ENET1_RDATA01 0x1b0b0 + MX6UL_PAD_ENET1_TX_DATA0__ENET1_TDATA00 0x1b0b0 + MX6UL_PAD_ENET1_TX_DATA1__ENET1_TDATA01 0x1b0b0 + MX6UL_PAD_ENET1_TX_EN__ENET1_TX_EN 0x1b0b0 + MX6UL_PAD_ENET1_TX_CLK__ENET1_REF_CLK1 0x4001b0a8 + >; + }; + + pinctrl_enet2: enet2grp { + fsl,pins = < + MX6UL_PAD_ENET2_RX_EN__ENET2_RX_EN 0x1b0b0 + MX6UL_PAD_ENET2_RX_ER__ENET2_RX_ER 0x1b0b0 + MX6UL_PAD_ENET2_RX_DATA0__ENET2_RDATA00 0x1b0b0 + MX6UL_PAD_ENET2_RX_DATA1__ENET2_RDATA01 0x1b0b0 + MX6UL_PAD_ENET2_TX_DATA0__ENET2_TDATA00 0x1b0a0 + MX6UL_PAD_ENET2_TX_DATA1__ENET2_TDATA01 0x1b0a0 + MX6UL_PAD_ENET2_TX_EN__ENET2_TX_EN 0x1b0b0 + MX6UL_PAD_ENET2_TX_CLK__ENET2_REF_CLK2 0x4001b0a8 + >; + }; + + pinctrl_enet2_mdc: enet2mdcgrp { + fsl,pins = < + /* mdio */ + MX6UL_PAD_GPIO1_IO07__ENET2_MDC 0x1b0b0 + MX6UL_PAD_GPIO1_IO06__ENET2_MDIO 0x1b0b0 + >; + }; + + pinctrl_expander_in0: expanderin0grp { + fsl,pins = < + MX6UL_PAD_CSI_DATA02__GPIO4_IO23 0x1b0b1 + >; + }; + + pinctrl_flexcan1: flexcan1grp { + fsl,pins = < + MX6UL_PAD_UART3_RTS_B__FLEXCAN1_RX 0x1b020 + MX6UL_PAD_UART3_CTS_B__FLEXCAN1_TX 0x1b020 + >; + }; + + pinctrl_flexcan2: flexcan2grp { + fsl,pins = < + MX6UL_PAD_UART2_RTS_B__FLEXCAN2_RX 0x1b020 + MX6UL_PAD_UART2_CTS_B__FLEXCAN2_TX 0x1b020 + >; + }; + + pinctrl_pwm2: pwm2grp { + fsl,pins = < + /* 100 k PD, DSE 120 OHM, SPPEED LO */ + MX6UL_PAD_GPIO1_IO09__PWM2_OUT 0x00003050 + >; + }; + + pinctrl_sai1: sai1grp { + fsl,pins = < + MX6UL_PAD_CSI_DATA05__SAI1_TX_BCLK 0x1b0b1 + MX6UL_PAD_CSI_DATA04__SAI1_TX_SYNC 0x1b0b1 + MX6UL_PAD_CSI_DATA07__SAI1_TX_DATA 0x1f0b8 + MX6UL_PAD_CSI_DATA06__SAI1_RX_DATA 0x110b0 + MX6UL_PAD_CSI_DATA01__SAI1_MCLK 0x1b0b1 + >; + }; + + pinctrl_uart1: uart1grp { + fsl,pins = < + MX6UL_PAD_UART1_TX_DATA__UART1_DCE_TX 0x1b0b1 + MX6UL_PAD_UART1_RX_DATA__UART1_DCE_RX 0x1b0b1 + >; + }; + + pinctrl_uart3: uart3grp { + fsl,pins = < + MX6UL_PAD_UART3_TX_DATA__UART3_DCE_TX 0x1b0b1 + MX6UL_PAD_UART3_RX_DATA__UART3_DCE_RX 0x1b0b1 + >; + }; + + pinctrl_uart6: uart6grp { + fsl,pins = < + MX6UL_PAD_CSI_MCLK__UART6_DCE_TX 0x1b0b1 + MX6UL_PAD_CSI_PIXCLK__UART6_DCE_RX 0x1b0b1 + MX6UL_PAD_CSI_VSYNC__UART6_DCE_RTS 0x1b0b1 + MX6UL_PAD_CSI_HSYNC__UART6_DCE_CTS 0x1b0b1 + >; + }; + + pinctrl_uart6dte: uart6dte { + fsl,pins = < + MX6UL_PAD_CSI_PIXCLK__UART6_DTE_TX 0x1b0b1 + MX6UL_PAD_CSI_MCLK__UART6_DTE_RX 0x1b0b1 + MX6UL_PAD_CSI_HSYNC__UART6_DTE_RTS 0x1b0b1 + MX6UL_PAD_CSI_VSYNC__UART6_DTE_CTS 0x1b0b1 + >; + }; + + pinctrl_usb_otg1: usbotg1grp { + fsl,pins = < + MX6UL_PAD_GPIO1_IO00__ANATOP_OTG1_ID 0x00017059 + MX6UL_PAD_GPIO1_IO01__USB_OTG1_OC 0x0001b0b0 + MX6UL_PAD_GPIO1_IO04__USB_OTG1_PWR 0x0001b099 + >; + }; + + pinctrl_usdhc1: usdhc1grp { + fsl,pins = < + MX6UL_PAD_SD1_CLK__USDHC1_CLK 0x00017069 + MX6UL_PAD_SD1_CMD__USDHC1_CMD 0x00017059 + MX6UL_PAD_SD1_DATA0__USDHC1_DATA0 0x00017059 + MX6UL_PAD_SD1_DATA1__USDHC1_DATA1 0x00017059 + MX6UL_PAD_SD1_DATA2__USDHC1_DATA2 0x00017059 + MX6UL_PAD_SD1_DATA3__USDHC1_DATA3 0x00017059 + /* WP */ + MX6UL_PAD_UART1_CTS_B__GPIO1_IO18 0x0001b099 + /* CD */ + MX6UL_PAD_UART1_RTS_B__GPIO1_IO19 0x0001b099 + >; + }; + + pinctrl_usdhc1_100mhz: usdhc1grp100mhz { + fsl,pins = < + MX6UL_PAD_SD1_CLK__USDHC1_CLK 0x00017069 + MX6UL_PAD_SD1_CMD__USDHC1_CMD 0x000170b9 + MX6UL_PAD_SD1_DATA0__USDHC1_DATA0 0x000170b9 + MX6UL_PAD_SD1_DATA1__USDHC1_DATA1 0x000170b9 + MX6UL_PAD_SD1_DATA2__USDHC1_DATA2 0x000170b9 + MX6UL_PAD_SD1_DATA3__USDHC1_DATA3 0x000170b9 + /* WP */ + MX6UL_PAD_UART1_CTS_B__GPIO1_IO18 0x0001b099 + /* CD */ + MX6UL_PAD_UART1_RTS_B__GPIO1_IO19 0x0001b099 + >; + }; + + pinctrl_usdhc1_200mhz: usdhc1grp200mhz { + fsl,pins = < + MX6UL_PAD_SD1_CLK__USDHC1_CLK 0x00017069 + MX6UL_PAD_SD1_CMD__USDHC1_CMD 0x000170f9 + MX6UL_PAD_SD1_DATA0__USDHC1_DATA0 0x000170f9 + MX6UL_PAD_SD1_DATA1__USDHC1_DATA1 0x000170f9 + MX6UL_PAD_SD1_DATA2__USDHC1_DATA2 0x000170f9 + MX6UL_PAD_SD1_DATA3__USDHC1_DATA3 0x000170f9 + /* WP */ + MX6UL_PAD_UART1_CTS_B__GPIO1_IO18 0x0001b099 + /* CD */ + MX6UL_PAD_UART1_RTS_B__GPIO1_IO19 0x0001b099 + >; + }; + + pinctrl_wdog1: wdog1grp { + fsl,pins = < + MX6UL_PAD_GPIO1_IO08__WDOG1_WDOG_B 0x0001b099 + >; + }; +}; diff --git a/arch/arm/boot/dts/meson8-minix-neo-x8.dts b/arch/arm/boot/dts/meson8-minix-neo-x8.dts index 61ec929ab86e..56ea875c418c 100644 --- a/arch/arm/boot/dts/meson8-minix-neo-x8.dts +++ b/arch/arm/boot/dts/meson8-minix-neo-x8.dts @@ -65,7 +65,7 @@ pinctrl-0 = <&spi_nor_pins>; pinctrl-names = "default"; - spi-flash@0 { + flash@0 { compatible = "mxicy,mx25l1606e"; #address-cells = <1>; #size-cells = <1>; diff --git a/arch/arm/boot/dts/mt2701.dtsi b/arch/arm/boot/dts/mt2701.dtsi index 4776f85d6d5b..ef583cfd3baf 100644 --- a/arch/arm/boot/dts/mt2701.dtsi +++ b/arch/arm/boot/dts/mt2701.dtsi @@ -564,7 +564,6 @@ clock-names = "jpgdec-smi", "jpgdec"; power-domains = <&scpsys MT2701_POWER_DOMAIN_ISP>; - mediatek,larb = <&larb2>; iommus = <&iommu MT2701_M4U_PORT_JPGDEC_WDMA>, <&iommu MT2701_M4U_PORT_JPGDEC_BSDMA>; }; @@ -577,7 +576,6 @@ clocks = <&imgsys CLK_IMG_VENC>; clock-names = "jpgenc"; power-domains = <&scpsys MT2701_POWER_DOMAIN_ISP>; - mediatek,larb = <&larb2>; iommus = <&iommu MT2701_M4U_PORT_JPGENC_RDMA>, <&iommu MT2701_M4U_PORT_JPGENC_BSDMA>; }; diff --git a/arch/arm/boot/dts/mt7623n.dtsi b/arch/arm/boot/dts/mt7623n.dtsi index bcb0846e29fd..3adab5cd1fef 100644 --- a/arch/arm/boot/dts/mt7623n.dtsi +++ b/arch/arm/boot/dts/mt7623n.dtsi @@ -121,7 +121,6 @@ clock-names = "jpgdec-smi", "jpgdec"; power-domains = <&scpsys MT2701_POWER_DOMAIN_ISP>; - mediatek,larb = <&larb2>; iommus = <&iommu MT2701_M4U_PORT_JPGDEC_WDMA>, <&iommu MT2701_M4U_PORT_JPGDEC_BSDMA>; }; @@ -144,7 +143,6 @@ interrupts = <GIC_SPI 153 IRQ_TYPE_LEVEL_LOW>; clocks = <&mmsys CLK_MM_DISP_OVL>; iommus = <&iommu MT2701_M4U_PORT_DISP_OVL_0>; - mediatek,larb = <&larb0>; }; rdma0: rdma@14008000 { @@ -154,7 +152,6 @@ interrupts = <GIC_SPI 152 IRQ_TYPE_LEVEL_LOW>; clocks = <&mmsys CLK_MM_DISP_RDMA>; iommus = <&iommu MT2701_M4U_PORT_DISP_RDMA>; - mediatek,larb = <&larb0>; }; wdma@14009000 { @@ -164,7 +161,6 @@ interrupts = <GIC_SPI 154 IRQ_TYPE_LEVEL_LOW>; clocks = <&mmsys CLK_MM_DISP_WDMA>; iommus = <&iommu MT2701_M4U_PORT_DISP_WDMA>; - mediatek,larb = <&larb0>; }; bls: pwm@1400a000 { @@ -215,7 +211,6 @@ interrupts = <GIC_SPI 164 IRQ_TYPE_LEVEL_LOW>; clocks = <&mmsys CLK_MM_DISP_RDMA1>; iommus = <&iommu MT2701_M4U_PORT_DISP_RDMA1>; - mediatek,larb = <&larb0>; }; dpi0: dpi@14014000 { diff --git a/arch/arm/boot/dts/nspire-classic.dtsi b/arch/arm/boot/dts/nspire-classic.dtsi index 41744cc2bc72..01e1bb7c3c6c 100644 --- a/arch/arm/boot/dts/nspire-classic.dtsi +++ b/arch/arm/boot/dts/nspire-classic.dtsi @@ -17,7 +17,7 @@ &fast_timer { /* compatible = "lsi,zevio-timer"; */ - reg = <0x90010000 0x1000>, <0x900A0010 0x8>; + reg = <0x90010000 0x1000>, <0x900a0010 0x8>; }; &uart { @@ -30,12 +30,12 @@ &timer0 { /* compatible = "lsi,zevio-timer"; */ - reg = <0x900C0000 0x1000>, <0x900A0018 0x8>; + reg = <0x900c0000 0x1000>, <0x900a0018 0x8>; }; &timer1 { compatible = "lsi,zevio-timer"; - reg = <0x900D0000 0x1000>, <0x900A0020 0x8>; + reg = <0x900d0000 0x1000>, <0x900a0020 0x8>; }; &keypad { @@ -66,10 +66,10 @@ #address-cells = <1>; #size-cells = <1>; - intc: interrupt-controller@DC000000 { + intc: interrupt-controller@dc000000 { compatible = "lsi,zevio-intc"; interrupt-controller; - reg = <0xDC000000 0x1000>; + reg = <0xdc000000 0x1000>; #interrupt-cells = <1>; }; }; diff --git a/arch/arm/boot/dts/nspire-cx.dts b/arch/arm/boot/dts/nspire-cx.dts index 0c16b04e2744..590b7dff6ae5 100644 --- a/arch/arm/boot/dts/nspire-cx.dts +++ b/arch/arm/boot/dts/nspire-cx.dts @@ -92,10 +92,10 @@ #address-cells = <1>; #size-cells = <1>; - intc: interrupt-controller@DC000000 { + intc: interrupt-controller@dc000000 { compatible = "arm,pl190-vic"; interrupt-controller; - reg = <0xDC000000 0x1000>; + reg = <0xdc000000 0x1000>; #interrupt-cells = <1>; }; diff --git a/arch/arm/boot/dts/nspire.dtsi b/arch/arm/boot/dts/nspire.dtsi index 90e033d9141f..bb240e6a3a6f 100644 --- a/arch/arm/boot/dts/nspire.dtsi +++ b/arch/arm/boot/dts/nspire.dtsi @@ -20,9 +20,9 @@ reg = <0x00000000 0x80000>; }; - sram: sram@A4000000 { + sram: sram@a4000000 { device = "memory"; - reg = <0xA4000000 0x20000>; + reg = <0xa4000000 0x20000>; }; timer_clk: timer_clk { @@ -33,12 +33,12 @@ base_clk: base_clk { #clock-cells = <0>; - reg = <0x900B0024 0x4>; + reg = <0x900b0024 0x4>; }; ahb_clk: ahb_clk { #clock-cells = <0>; - reg = <0x900B0024 0x4>; + reg = <0x900b0024 0x4>; clocks = <&base_clk>; }; @@ -71,28 +71,28 @@ #size-cells = <1>; ranges; - spi: spi@A9000000 { - reg = <0xA9000000 0x1000>; + spi: spi@a9000000 { + reg = <0xa9000000 0x1000>; }; - usb0: usb@B0000000 { + usb0: usb@b0000000 { compatible = "lsi,zevio-usb"; - reg = <0xB0000000 0x1000>; + reg = <0xb0000000 0x1000>; interrupts = <8>; usb-phy = <&usb_phy>; vbus-supply = <&vbus_reg>; }; - usb1: usb@B4000000 { - reg = <0xB4000000 0x1000>; + usb1: usb@b4000000 { + reg = <0xb4000000 0x1000>; interrupts = <9>; status = "disabled"; }; - lcd: lcd@C0000000 { + lcd: lcd@c0000000 { compatible = "arm,pl111", "arm,primecell"; - reg = <0xC0000000 0x1000>; + reg = <0xc0000000 0x1000>; interrupts = <21>; /* @@ -105,17 +105,17 @@ clock-names = "clcdclk", "apb_pclk"; }; - adc: adc@C4000000 { - reg = <0xC4000000 0x1000>; + adc: adc@c4000000 { + reg = <0xc4000000 0x1000>; interrupts = <11>; }; - tdes: crypto@C8010000 { - reg = <0xC8010000 0x1000>; + tdes: crypto@c8010000 { + reg = <0xc8010000 0x1000>; }; - sha256: crypto@CC000000 { - reg = <0xCC000000 0x1000>; + sha256: crypto@cc000000 { + reg = <0xcc000000 0x1000>; }; apb@90000000 { @@ -143,16 +143,16 @@ interrupts = <1>; }; - timer0: timer@900C0000 { - reg = <0x900C0000 0x1000>; + timer0: timer@900c0000 { + reg = <0x900c0000 0x1000>; clocks = <&timer_clk>, <&timer_clk>, <&timer_clk>; clock-names = "timer0clk", "timer1clk", "apb_pclk"; }; - timer1: timer@900D0000 { - reg = <0x900D0000 0x1000>; + timer1: timer@900d0000 { + reg = <0x900d0000 0x1000>; interrupts = <19>; clocks = <&timer_clk>, <&timer_clk>, <&timer_clk>; @@ -171,18 +171,18 @@ interrupts = <4>; }; - misc: misc@900A0000 { - reg = <0x900A0000 0x1000>; + misc: misc@900a0000 { + reg = <0x900a0000 0x1000>; }; - pwr: pwr@900B0000 { - reg = <0x900B0000 0x1000>; + pwr: pwr@900b0000 { + reg = <0x900b0000 0x1000>; interrupts = <15>; }; - keypad: input@900E0000 { + keypad: input@900e0000 { compatible = "ti,nspire-keypad"; - reg = <0x900E0000 0x1000>; + reg = <0x900e0000 0x1000>; interrupts = <16>; scan-interval = <1000>; @@ -191,8 +191,8 @@ clocks = <&apb_pclk>; }; - contrast: contrast@900F0000 { - reg = <0x900F0000 0x1000>; + contrast: contrast@900f0000 { + reg = <0x900f0000 0x1000>; }; led: led@90110000 { diff --git a/arch/arm/boot/dts/nuvoton-npcm730-gbs.dts b/arch/arm/boot/dts/nuvoton-npcm730-gbs.dts index eb6eb21cb2a4..d10669fcd527 100644 --- a/arch/arm/boot/dts/nuvoton-npcm730-gbs.dts +++ b/arch/arm/boot/dts/nuvoton-npcm730-gbs.dts @@ -358,7 +358,7 @@ pinctrl-names = "default"; pinctrl-0 = <&spi0cs1_pins>; status = "okay"; - spi-nor@0 { + flash@0 { compatible = "jedec,spi-nor"; #address-cells = <1>; #size-cells = <1>; @@ -406,7 +406,7 @@ pinctrl-0 = <&spi3_pins>, <&spi3cs1_pins>; status = "okay"; - spi-nor@0 { + flash@0 { compatible = "jedec,spi-nor"; #address-cells = <1>; #size-cells = <1>; @@ -416,7 +416,7 @@ m25p,fast-read; label = "pnor"; }; - spi-nor@1 { + flash@1 { compatible = "jedec,spi-nor"; #address-cells = <1>; #size-cells = <1>; diff --git a/arch/arm/boot/dts/nuvoton-npcm730-gsj.dts b/arch/arm/boot/dts/nuvoton-npcm730-gsj.dts index d4ff49939a3d..491606c4f044 100644 --- a/arch/arm/boot/dts/nuvoton-npcm730-gsj.dts +++ b/arch/arm/boot/dts/nuvoton-npcm730-gsj.dts @@ -135,7 +135,7 @@ pinctrl-0 = <&spi0cs1_pins>; status = "okay"; - spi-nor@0 { + flash@0 { compatible = "jedec,spi-nor"; #address-cells = <1>; #size-cells = <1>; diff --git a/arch/arm/boot/dts/nuvoton-npcm730-kudo.dts b/arch/arm/boot/dts/nuvoton-npcm730-kudo.dts index 82a104b2a65f..a0c2d7652625 100644 --- a/arch/arm/boot/dts/nuvoton-npcm730-kudo.dts +++ b/arch/arm/boot/dts/nuvoton-npcm730-kudo.dts @@ -380,7 +380,7 @@ pinctrl-names = "default"; pinctrl-0 = <&spi0cs1_pins>; status = "okay"; - spi-nor@0 { + flash@0 { compatible = "jedec,spi-nor"; #address-cells = <1>; #size-cells = <1>; @@ -415,7 +415,7 @@ }; }; }; - spi-nor@1 { + flash@1 { compatible = "jedec,spi-nor"; #address-cells = <1>; #size-cells = <1>; @@ -440,7 +440,7 @@ &fiu3 { pinctrl-0 = <&spi3_pins>; - spi-nor@0 { + flash@0 { compatible = "jedec,spi-nor"; #address-cells = <1>; #size-cells = <1>; diff --git a/arch/arm/boot/dts/nuvoton-npcm750-evb.dts b/arch/arm/boot/dts/nuvoton-npcm750-evb.dts index 0334641f8829..3dad32834e5e 100644 --- a/arch/arm/boot/dts/nuvoton-npcm750-evb.dts +++ b/arch/arm/boot/dts/nuvoton-npcm750-evb.dts @@ -67,7 +67,7 @@ &fiu0 { status = "okay"; - spi-nor@0 { + flash@0 { compatible = "jedec,spi-nor"; #address-cells = <1>; #size-cells = <1>; @@ -128,7 +128,7 @@ &fiu3 { pinctrl-0 = <&spi3_pins>, <&spi3quad_pins>; status = "okay"; - spi-nor@0 { + flash@0 { compatible = "jedec,spi-nor"; #address-cells = <1>; #size-cells = <1>; @@ -324,7 +324,7 @@ &spi0 { cs-gpios = <&gpio6 11 GPIO_ACTIVE_LOW>; status = "okay"; - Flash@0 { + flash@0 { compatible = "winbond,w25q128", "jedec,spi-nor"; reg = <0x0>; @@ -345,7 +345,7 @@ &spi1 { cs-gpios = <&gpio0 20 GPIO_ACTIVE_LOW>; status = "okay"; - Flash@0 { + flash@0 { compatible = "winbond,w25q128fw", "jedec,spi-nor"; reg = <0x0>; diff --git a/arch/arm/boot/dts/nuvoton-npcm750-runbmc-olympus.dts b/arch/arm/boot/dts/nuvoton-npcm750-runbmc-olympus.dts index 767e0ac0df7c..132e702281fc 100644 --- a/arch/arm/boot/dts/nuvoton-npcm750-runbmc-olympus.dts +++ b/arch/arm/boot/dts/nuvoton-npcm750-runbmc-olympus.dts @@ -100,7 +100,7 @@ pinctrl-0 = <&spi0cs1_pins>; status = "okay"; - spi-nor@0 { + flash@0 { compatible = "jedec,spi-nor"; #address-cells = <1>; #size-cells = <1>; @@ -139,7 +139,7 @@ }; }; - spi-nor@1 { + flash@1 { compatible = "jedec,spi-nor"; #address-cells = <1>; #size-cells = <1>; @@ -166,7 +166,7 @@ pinctrl-0 = <&spi3_pins>; status = "okay"; - spi-nor@0 { + flash@0 { compatible = "jedec,spi-nor"; #address-cells = <1>; #size-cells = <1>; diff --git a/arch/arm/boot/dts/omap3-beagle-xm.dts b/arch/arm/boot/dts/omap3-beagle-xm.dts index a858ebfa1500..35eced6521ef 100644 --- a/arch/arm/boot/dts/omap3-beagle-xm.dts +++ b/arch/arm/boot/dts/omap3-beagle-xm.dts @@ -370,7 +370,7 @@ #address-cells = <1>; #size-cells = <0>; - ethernet: usbether@1 { + ethernet: ethernet@1 { compatible = "usb424,ec00"; reg = <1>; }; diff --git a/arch/arm/boot/dts/omap3430es1-clocks.dtsi b/arch/arm/boot/dts/omap3430es1-clocks.dtsi index 2ec3628d3315..24adfac26be0 100644 --- a/arch/arm/boot/dts/omap3430es1-clocks.dtsi +++ b/arch/arm/boot/dts/omap3430es1-clocks.dtsi @@ -46,37 +46,61 @@ ti,bit-shift = <2>; }; - d2d_26m_fck: d2d_26m_fck@a00 { - #clock-cells = <0>; - compatible = "ti,wait-gate-clock"; - clocks = <&sys_ck>; - reg = <0x0a00>; - ti,bit-shift = <3>; - }; - - fshostusb_fck: fshostusb_fck@a00 { - #clock-cells = <0>; - compatible = "ti,wait-gate-clock"; - clocks = <&core_48m_fck>; - reg = <0x0a00>; - ti,bit-shift = <5>; - }; - - ssi_ssr_gate_fck_3430es1: ssi_ssr_gate_fck_3430es1@a00 { - #clock-cells = <0>; - compatible = "ti,composite-no-wait-gate-clock"; - clocks = <&corex2_fck>; - ti,bit-shift = <0>; - reg = <0x0a00>; - }; - - ssi_ssr_div_fck_3430es1: ssi_ssr_div_fck_3430es1@a40 { - #clock-cells = <0>; - compatible = "ti,composite-divider-clock"; - clocks = <&corex2_fck>; - ti,bit-shift = <8>; - reg = <0x0a40>; - ti,dividers = <0>, <1>, <2>, <3>, <4>, <0>, <6>, <0>, <8>; + clock@a00 { + compatible = "ti,clksel"; + reg = <0xa00>; + #clock-cells = <2>; + #address-cells = <0>; + + d2d_26m_fck: clock-d2d-26m-fck { + #clock-cells = <0>; + compatible = "ti,wait-gate-clock"; + clock-output-names = "d2d_26m_fck"; + clocks = <&sys_ck>; + ti,bit-shift = <3>; + }; + + fshostusb_fck: clock-fshostusb-fck { + #clock-cells = <0>; + compatible = "ti,wait-gate-clock"; + clock-output-names = "fshostusb_fck"; + clocks = <&core_48m_fck>; + ti,bit-shift = <5>; + }; + + ssi_ssr_gate_fck_3430es1: clock-ssi-ssr-gate-fck-3430es1 { + #clock-cells = <0>; + compatible = "ti,composite-no-wait-gate-clock"; + clock-output-names = "ssi_ssr_gate_fck_3430es1"; + clocks = <&corex2_fck>; + ti,bit-shift = <0>; + }; + }; + + clock@a40 { + compatible = "ti,clksel"; + reg = <0xa40>; + #clock-cells = <2>; + #address-cells = <0>; + + ssi_ssr_div_fck_3430es1: clock-ssi-ssr-div-fck-3430es1 { + #clock-cells = <0>; + compatible = "ti,composite-divider-clock"; + clock-output-names = "ssi_ssr_div_fck_3430es1"; + clocks = <&corex2_fck>; + ti,bit-shift = <8>; + ti,dividers = <0>, <1>, <2>, <3>, <4>, <0>, <6>, <0>, <8>; + }; + + usb_l4_div_ick: clock-usb-l4-div-ick { + #clock-cells = <0>; + compatible = "ti,composite-divider-clock"; + clock-output-names = "usb_l4_div_ick"; + clocks = <&l4_ick>; + ti,bit-shift = <4>; + ti,max-div = <1>; + ti,index-starts-at-one; + }; }; ssi_ssr_fck: ssi_ssr_fck_3430es1 { @@ -93,20 +117,43 @@ clock-div = <2>; }; - hsotgusb_ick_3430es1: hsotgusb_ick_3430es1@a10 { - #clock-cells = <0>; - compatible = "ti,omap3-no-wait-interface-clock"; - clocks = <&core_l3_ick>; - reg = <0x0a10>; - ti,bit-shift = <4>; - }; - - fac_ick: fac_ick@a10 { - #clock-cells = <0>; - compatible = "ti,omap3-interface-clock"; - clocks = <&core_l4_ick>; - reg = <0x0a10>; - ti,bit-shift = <8>; + clock@a10 { + compatible = "ti,clksel"; + reg = <0xa10>; + #clock-cells = <2>; + #address-cells = <0>; + + hsotgusb_ick_3430es1: clock-hsotgusb-ick-3430es1 { + #clock-cells = <0>; + compatible = "ti,omap3-no-wait-interface-clock"; + clock-output-names = "hsotgusb_ick_3430es1"; + clocks = <&core_l3_ick>; + ti,bit-shift = <4>; + }; + + fac_ick: clock-fac-ick { + #clock-cells = <0>; + compatible = "ti,omap3-interface-clock"; + clock-output-names = "fac_ick"; + clocks = <&core_l4_ick>; + ti,bit-shift = <8>; + }; + + ssi_ick: clock-ssi-ick-3430es1 { + #clock-cells = <0>; + compatible = "ti,omap3-no-wait-interface-clock"; + clock-output-names = "ssi_ick_3430es1"; + clocks = <&ssi_l4_ick>; + ti,bit-shift = <0>; + }; + + usb_l4_gate_ick: clock-usb-l4-gate-ick { + #clock-cells = <0>; + compatible = "ti,composite-interface-clock"; + clock-output-names = "usb_l4_gate_ick"; + clocks = <&l4_ick>; + ti,bit-shift = <5>; + }; }; ssi_l4_ick: ssi_l4_ick { @@ -117,45 +164,26 @@ clock-div = <1>; }; - ssi_ick: ssi_ick_3430es1@a10 { - #clock-cells = <0>; - compatible = "ti,omap3-no-wait-interface-clock"; - clocks = <&ssi_l4_ick>; - reg = <0x0a10>; - ti,bit-shift = <0>; - }; - - usb_l4_gate_ick: usb_l4_gate_ick@a10 { - #clock-cells = <0>; - compatible = "ti,composite-interface-clock"; - clocks = <&l4_ick>; - ti,bit-shift = <5>; - reg = <0x0a10>; - }; - - usb_l4_div_ick: usb_l4_div_ick@a40 { - #clock-cells = <0>; - compatible = "ti,composite-divider-clock"; - clocks = <&l4_ick>; - ti,bit-shift = <4>; - ti,max-div = <1>; - reg = <0x0a40>; - ti,index-starts-at-one; - }; - usb_l4_ick: usb_l4_ick { #clock-cells = <0>; compatible = "ti,composite-clock"; clocks = <&usb_l4_gate_ick>, <&usb_l4_div_ick>; }; - dss1_alwon_fck: dss1_alwon_fck_3430es1@e00 { - #clock-cells = <0>; - compatible = "ti,gate-clock"; - clocks = <&dpll4_m4x2_ck>; - ti,bit-shift = <0>; - reg = <0x0e00>; - ti,set-rate-parent; + clock@e00 { + compatible = "ti,clksel"; + reg = <0xe00>; + #clock-cells = <2>; + #address-cells = <0>; + + dss1_alwon_fck: clock-dss1-alwon-fck-3430es1 { + #clock-cells = <0>; + compatible = "ti,gate-clock"; + clock-output-names = "dss1_alwon_fck_3430es1"; + clocks = <&dpll4_m4x2_ck>; + ti,bit-shift = <0>; + ti,set-rate-parent; + }; }; dss_ick: dss_ick_3430es1@e10 { diff --git a/arch/arm/boot/dts/omap34xx-omap36xx-clocks.dtsi b/arch/arm/boot/dts/omap34xx-omap36xx-clocks.dtsi index 21079cdf2663..8374532f20e2 100644 --- a/arch/arm/boot/dts/omap34xx-omap36xx-clocks.dtsi +++ b/arch/arm/boot/dts/omap34xx-omap36xx-clocks.dtsi @@ -13,45 +13,76 @@ clock-div = <1>; }; - aes1_ick: aes1_ick@a14 { - #clock-cells = <0>; - compatible = "ti,omap3-interface-clock"; - clocks = <&security_l4_ick2>; - ti,bit-shift = <3>; - reg = <0x0a14>; - }; + clock@a14 { + compatible = "ti,clksel"; + reg = <0xa14>; + #clock-cells = <2>; + #address-cells = <0>; - rng_ick: rng_ick@a14 { - #clock-cells = <0>; - compatible = "ti,omap3-interface-clock"; - clocks = <&security_l4_ick2>; - reg = <0x0a14>; - ti,bit-shift = <2>; - }; + aes1_ick: clock-aes1-ick { + #clock-cells = <0>; + compatible = "ti,omap3-interface-clock"; + clock-output-names = "aes1_ick"; + clocks = <&security_l4_ick2>; + ti,bit-shift = <3>; + }; - sha11_ick: sha11_ick@a14 { - #clock-cells = <0>; - compatible = "ti,omap3-interface-clock"; - clocks = <&security_l4_ick2>; - reg = <0x0a14>; - ti,bit-shift = <1>; - }; + rng_ick: clock-rng-ick { + #clock-cells = <0>; + compatible = "ti,omap3-interface-clock"; + clock-output-names = "rng_ick"; + clocks = <&security_l4_ick2>; + ti,bit-shift = <2>; + }; - des1_ick: des1_ick@a14 { - #clock-cells = <0>; - compatible = "ti,omap3-interface-clock"; - clocks = <&security_l4_ick2>; - reg = <0x0a14>; - ti,bit-shift = <0>; + sha11_ick: clock-sha11-ick { + #clock-cells = <0>; + compatible = "ti,omap3-interface-clock"; + clock-output-names = "sha11_ick"; + clocks = <&security_l4_ick2>; + ti,bit-shift = <1>; + }; + + des1_ick: clock-des1-ick { + #clock-cells = <0>; + compatible = "ti,omap3-interface-clock"; + clock-output-names = "des1_ick"; + clocks = <&security_l4_ick2>; + ti,bit-shift = <0>; + }; + + pka_ick: clock-pka-ick { + #clock-cells = <0>; + compatible = "ti,omap3-interface-clock"; + clock-output-names = "pka_ick"; + clocks = <&security_l3_ick>; + ti,bit-shift = <4>; + }; }; - cam_mclk: cam_mclk@f00 { - #clock-cells = <0>; - compatible = "ti,gate-clock"; - clocks = <&dpll4_m5x2_ck>; - ti,bit-shift = <0>; - reg = <0x0f00>; - ti,set-rate-parent; + /* CM_FCLKEN_CAM */ + clock@f00 { + compatible = "ti,clksel"; + reg = <0xf00>; + #clock-cells = <2>; + #address-cells = <0>; + + cam_mclk: clock-cam-mclk { + #clock-cells = <0>; + compatible = "ti,gate-clock"; + clock-output-names = "cam_mclk"; + clocks = <&dpll4_m5x2_ck>; + ti,bit-shift = <0>; + ti,set-rate-parent; + }; + + csi2_96m_fck: clock-csi2-96m-fck { + #clock-cells = <0>; + compatible = "ti,gate-clock"; + clock-output-names = "csi2_96m_fck"; + clocks = <&core_96m_fck>; + ti,bit-shift = <1>; + }; }; cam_ick: cam_ick@f10 { @@ -62,14 +93,6 @@ ti,bit-shift = <0>; }; - csi2_96m_fck: csi2_96m_fck@f00 { - #clock-cells = <0>; - compatible = "ti,gate-clock"; - clocks = <&core_96m_fck>; - reg = <0x0f00>; - ti,bit-shift = <1>; - }; - security_l3_ick: security_l3_ick { #clock-cells = <0>; compatible = "fixed-factor-clock"; @@ -78,44 +101,51 @@ clock-div = <1>; }; - pka_ick: pka_ick@a14 { - #clock-cells = <0>; - compatible = "ti,omap3-interface-clock"; - clocks = <&security_l3_ick>; - reg = <0x0a14>; - ti,bit-shift = <4>; - }; + clock@a10 { + compatible = "ti,clksel"; + reg = <0xa10>; + #clock-cells = <2>; + #address-cells = <0>; - icr_ick: icr_ick@a10 { - #clock-cells = <0>; - compatible = "ti,omap3-interface-clock"; - clocks = <&core_l4_ick>; - reg = <0x0a10>; - ti,bit-shift = <29>; - }; + icr_ick: clock-icr-ick { + #clock-cells = <0>; + compatible = "ti,omap3-interface-clock"; + clock-output-names = "icr_ick"; + clocks = <&core_l4_ick>; + ti,bit-shift = <29>; + }; - des2_ick: des2_ick@a10 { - #clock-cells = <0>; - compatible = "ti,omap3-interface-clock"; - clocks = <&core_l4_ick>; - reg = <0x0a10>; - ti,bit-shift = <26>; - }; + des2_ick: clock-des2-ick { + #clock-cells = <0>; + compatible = "ti,omap3-interface-clock"; + clock-output-names = "des2_ick"; + clocks = <&core_l4_ick>; + ti,bit-shift = <26>; + }; - mspro_ick: mspro_ick@a10 { - #clock-cells = <0>; - compatible = "ti,omap3-interface-clock"; - clocks = <&core_l4_ick>; - reg = <0x0a10>; - ti,bit-shift = <23>; - }; + mspro_ick: clock-mspro-ick { + #clock-cells = <0>; + compatible = "ti,omap3-interface-clock"; + clock-output-names = "mspro_ick"; + clocks = <&core_l4_ick>; + ti,bit-shift = <23>; + }; - mailboxes_ick: mailboxes_ick@a10 { - #clock-cells = <0>; - compatible = "ti,omap3-interface-clock"; - clocks = <&core_l4_ick>; - reg = <0x0a10>; - ti,bit-shift = <7>; + mailboxes_ick: clock-mailboxes-ick { + #clock-cells = <0>; + compatible = "ti,omap3-interface-clock"; + clock-output-names = "mailboxes_ick"; + clocks = <&core_l4_ick>; + ti,bit-shift = <7>; + }; + + sad2d_ick: clock-sad2d-ick { + #clock-cells = <0>; + compatible = "ti,omap3-interface-clock"; + clock-output-names = "sad2d_ick"; + clocks = <&l3_ick>; + ti,bit-shift = <3>; + }; }; ssi_l4_ick: ssi_l4_ick { @@ -126,20 +156,27 @@ clock-div = <1>; }; - sr1_fck: sr1_fck@c00 { - #clock-cells = <0>; - compatible = "ti,wait-gate-clock"; - clocks = <&sys_ck>; - reg = <0x0c00>; - ti,bit-shift = <6>; - }; + clock@c00 { + compatible = "ti,clksel"; + reg = <0xc00>; + #clock-cells = <2>; + #address-cells = <0>; - sr2_fck: sr2_fck@c00 { - #clock-cells = <0>; - compatible = "ti,wait-gate-clock"; - clocks = <&sys_ck>; - reg = <0x0c00>; - ti,bit-shift = <7>; + sr1_fck: clock-sr1-fck { + #clock-cells = <0>; + compatible = "ti,wait-gate-clock"; + clock-output-names = "sr1_fck"; + clocks = <&sys_ck>; + ti,bit-shift = <6>; + }; + + sr2_fck: clock-sr2-fck { + #clock-cells = <0>; + compatible = "ti,wait-gate-clock"; + clock-output-names = "sr2_fck"; + clocks = <&sys_ck>; + ti,bit-shift = <7>; + }; }; sr_l4_ick: sr_l4_ick { @@ -187,37 +224,45 @@ ti,bit-shift = <0>; }; - modem_fck: modem_fck@a00 { - #clock-cells = <0>; - compatible = "ti,omap3-interface-clock"; - clocks = <&sys_ck>; - reg = <0x0a00>; - ti,bit-shift = <31>; - }; + clock@a00 { + compatible = "ti,clksel"; + reg = <0xa00>; + #clock-cells = <2>; + #address-cells = <0>; - sad2d_ick: sad2d_ick@a10 { - #clock-cells = <0>; - compatible = "ti,omap3-interface-clock"; - clocks = <&l3_ick>; - reg = <0x0a10>; - ti,bit-shift = <3>; - }; + modem_fck: clock-modem-fck { + #clock-cells = <0>; + compatible = "ti,omap3-interface-clock"; + clock-output-names = "modem_fck"; + clocks = <&sys_ck>; + ti,bit-shift = <31>; + }; - mad2d_ick: mad2d_ick@a18 { - #clock-cells = <0>; - compatible = "ti,omap3-interface-clock"; - clocks = <&l3_ick>; - reg = <0x0a18>; - ti,bit-shift = <3>; + mspro_fck: clock-mspro-fck { + #clock-cells = <0>; + compatible = "ti,wait-gate-clock"; + clock-output-names = "mspro_fck"; + clocks = <&core_96m_fck>; + ti,bit-shift = <23>; + }; }; - mspro_fck: mspro_fck@a00 { - #clock-cells = <0>; - compatible = "ti,wait-gate-clock"; - clocks = <&core_96m_fck>; - reg = <0x0a00>; - ti,bit-shift = <23>; + /* CM_ICLKEN3_CORE */ + clock@a18 { + compatible = "ti,clksel"; + reg = <0xa18>; + #clock-cells = <2>; + #address-cells = <0>; + + mad2d_ick: clock-mad2d-ick { + #clock-cells = <0>; + compatible = "ti,omap3-interface-clock"; + clock-output-names = "mad2d_ick"; + clocks = <&l3_ick>; + ti,bit-shift = <3>; + }; }; + }; &cm_clockdomains { diff --git a/arch/arm/boot/dts/omap36xx-am35xx-omap3430es2plus-clocks.dtsi b/arch/arm/boot/dts/omap36xx-am35xx-omap3430es2plus-clocks.dtsi index 9974d5226971..dcc5cfcd1fe6 100644 --- a/arch/arm/boot/dts/omap36xx-am35xx-omap3430es2plus-clocks.dtsi +++ b/arch/arm/boot/dts/omap36xx-am35xx-omap3430es2plus-clocks.dtsi @@ -133,37 +133,66 @@ ti,bit-shift = <2>; }; - usbtll_ick: usbtll_ick@a18 { - #clock-cells = <0>; - compatible = "ti,omap3-interface-clock"; - clocks = <&core_l4_ick>; - reg = <0x0a18>; - ti,bit-shift = <2>; + /* CM_ICLKEN3_CORE */ + clock@a18 { + compatible = "ti,clksel"; + reg = <0xa18>; + #clock-cells = <2>; + #address-cells = <0>; + + usbtll_ick: clock-usbtll-ick { + #clock-cells = <0>; + compatible = "ti,omap3-interface-clock"; + clock-output-names = "usbtll_ick"; + clocks = <&core_l4_ick>; + ti,bit-shift = <2>; + }; }; - mmchs3_ick: mmchs3_ick@a10 { - #clock-cells = <0>; - compatible = "ti,omap3-interface-clock"; - clocks = <&core_l4_ick>; - reg = <0x0a10>; - ti,bit-shift = <30>; + clock@a10 { + compatible = "ti,clksel"; + reg = <0xa10>; + #clock-cells = <2>; + #address-cells = <0>; + + mmchs3_ick: clock-mmchs3-ick { + #clock-cells = <0>; + compatible = "ti,omap3-interface-clock"; + clock-output-names = "mmchs3_ick"; + clocks = <&core_l4_ick>; + ti,bit-shift = <30>; + }; }; - mmchs3_fck: mmchs3_fck@a00 { - #clock-cells = <0>; - compatible = "ti,wait-gate-clock"; - clocks = <&core_96m_fck>; - reg = <0x0a00>; - ti,bit-shift = <30>; + clock@a00 { + compatible = "ti,clksel"; + reg = <0xa00>; + #clock-cells = <2>; + #address-cells = <0>; + + mmchs3_fck: clock-mmchs3-fck { + #clock-cells = <0>; + compatible = "ti,wait-gate-clock"; + clock-output-names = "mmchs3_fck"; + clocks = <&core_96m_fck>; + ti,bit-shift = <30>; + }; }; - dss1_alwon_fck: dss1_alwon_fck_3430es2@e00 { - #clock-cells = <0>; - compatible = "ti,dss-gate-clock"; - clocks = <&dpll4_m4x2_ck>; - ti,bit-shift = <0>; - reg = <0x0e00>; - ti,set-rate-parent; + clock@e00 { + compatible = "ti,clksel"; + reg = <0xe00>; + #clock-cells = <2>; + #address-cells = <0>; + + dss1_alwon_fck: clock-dss1-alwon-fck-3430es2 { + #clock-cells = <0>; + compatible = "ti,dss-gate-clock"; + clock-output-names = "dss1_alwon_fck_3430es2"; + clocks = <&dpll4_m4x2_ck>; + ti,bit-shift = <0>; + ti,set-rate-parent; + }; }; dss_ick: dss_ick_3430es2@e10 { diff --git a/arch/arm/boot/dts/omap36xx-clocks.dtsi b/arch/arm/boot/dts/omap36xx-clocks.dtsi index 4e9cc9003594..c5fdb2bd765d 100644 --- a/arch/arm/boot/dts/omap36xx-clocks.dtsi +++ b/arch/arm/boot/dts/omap36xx-clocks.dtsi @@ -58,12 +58,19 @@ ti,set-bit-to-disable; }; - uart4_fck: uart4_fck@1000 { - #clock-cells = <0>; - compatible = "ti,wait-gate-clock"; - clocks = <&per_48m_fck>; + clock@1000 { + compatible = "ti,clksel"; reg = <0x1000>; - ti,bit-shift = <18>; + #clock-cells = <2>; + #address-cells = <0>; + + uart4_fck: clock-uart4-fck { + #clock-cells = <0>; + compatible = "ti,wait-gate-clock"; + clock-output-names = "uart4_fck"; + clocks = <&per_48m_fck>; + ti,bit-shift = <18>; + }; }; }; diff --git a/arch/arm/boot/dts/omap36xx-omap3430es2plus-clocks.dtsi b/arch/arm/boot/dts/omap36xx-omap3430es2plus-clocks.dtsi index 945537aee3ca..c94eb86d3da7 100644 --- a/arch/arm/boot/dts/omap36xx-omap3430es2plus-clocks.dtsi +++ b/arch/arm/boot/dts/omap36xx-omap3430es2plus-clocks.dtsi @@ -5,21 +5,35 @@ * Copyright (C) 2013 Texas Instruments, Inc. */ &cm_clocks { - ssi_ssr_gate_fck_3430es2: ssi_ssr_gate_fck_3430es2@a00 { - #clock-cells = <0>; - compatible = "ti,composite-no-wait-gate-clock"; - clocks = <&corex2_fck>; - ti,bit-shift = <0>; - reg = <0x0a00>; - }; - - ssi_ssr_div_fck_3430es2: ssi_ssr_div_fck_3430es2@a40 { - #clock-cells = <0>; - compatible = "ti,composite-divider-clock"; - clocks = <&corex2_fck>; - ti,bit-shift = <8>; - reg = <0x0a40>; - ti,dividers = <0>, <1>, <2>, <3>, <4>, <0>, <6>, <0>, <8>; + clock@a00 { + compatible = "ti,clksel"; + reg = <0xa00>; + #clock-cells = <2>; + #address-cells = <0>; + + ssi_ssr_gate_fck_3430es2: clock-ssi-ssr-gate-fck-3430es2 { + #clock-cells = <0>; + compatible = "ti,composite-no-wait-gate-clock"; + clock-output-names = "ssi_ssr_gate_fck_3430es2"; + clocks = <&corex2_fck>; + ti,bit-shift = <0>; + }; + }; + + clock@a40 { + compatible = "ti,clksel"; + reg = <0xa40>; + #clock-cells = <2>; + #address-cells = <0>; + + ssi_ssr_div_fck_3430es2: clock-ssi-ssr-div-fck-3430es2 { + #clock-cells = <0>; + compatible = "ti,composite-divider-clock"; + clock-output-names = "ssi_ssr_div_fck_3430es2"; + clocks = <&corex2_fck>; + ti,bit-shift = <8>; + ti,dividers = <0>, <1>, <2>, <3>, <4>, <0>, <6>, <0>, <8>; + }; }; ssi_ssr_fck: ssi_ssr_fck_3430es2 { @@ -36,12 +50,27 @@ clock-div = <2>; }; - hsotgusb_ick_3430es2: hsotgusb_ick_3430es2@a10 { - #clock-cells = <0>; - compatible = "ti,omap3-hsotgusb-interface-clock"; - clocks = <&core_l3_ick>; - reg = <0x0a10>; - ti,bit-shift = <4>; + clock@a10 { + compatible = "ti,clksel"; + reg = <0xa10>; + #clock-cells = <2>; + #address-cells = <0>; + + hsotgusb_ick_3430es2: clock-hsotgusb-ick-3430es2 { + #clock-cells = <0>; + compatible = "ti,omap3-hsotgusb-interface-clock"; + clock-output-names = "hsotgusb_ick_3430es2"; + clocks = <&core_l3_ick>; + ti,bit-shift = <4>; + }; + + ssi_ick: clock-ssi-ick-3430es2 { + #clock-cells = <0>; + compatible = "ti,omap3-ssi-interface-clock"; + clock-output-names = "ssi_ick_3430es2"; + clocks = <&ssi_l4_ick>; + ti,bit-shift = <0>; + }; }; ssi_l4_ick: ssi_l4_ick { @@ -52,20 +81,19 @@ clock-div = <1>; }; - ssi_ick: ssi_ick_3430es2@a10 { - #clock-cells = <0>; - compatible = "ti,omap3-ssi-interface-clock"; - clocks = <&ssi_l4_ick>; - reg = <0x0a10>; - ti,bit-shift = <0>; - }; + clock@c00 { + compatible = "ti,clksel"; + reg = <0xc00>; + #clock-cells = <2>; + #address-cells = <0>; - usim_gate_fck: usim_gate_fck@c00 { - #clock-cells = <0>; - compatible = "ti,composite-gate-clock"; - clocks = <&omap_96m_fck>; - ti,bit-shift = <9>; - reg = <0x0c00>; + usim_gate_fck: clock-usim-gate-fck { + #clock-cells = <0>; + compatible = "ti,composite-gate-clock"; + clock-output-names = "usim_gate_fck"; + clocks = <&omap_96m_fck>; + ti,bit-shift = <9>; + }; }; sys_d2_ck: sys_d2_ck { @@ -140,13 +168,20 @@ clock-div = <20>; }; - usim_mux_fck: usim_mux_fck@c40 { - #clock-cells = <0>; - compatible = "ti,composite-mux-clock"; - clocks = <&sys_ck>, <&sys_d2_ck>, <&omap_96m_d2_fck>, <&omap_96m_d4_fck>, <&omap_96m_d8_fck>, <&omap_96m_d10_fck>, <&dpll5_m2_d4_ck>, <&dpll5_m2_d8_ck>, <&dpll5_m2_d16_ck>, <&dpll5_m2_d20_ck>; - ti,bit-shift = <3>; - reg = <0x0c40>; - ti,index-starts-at-one; + clock@c40 { + compatible = "ti,clksel"; + reg = <0xc40>; + #clock-cells = <2>; + #address-cells = <0>; + + usim_mux_fck: clock-usim-mux-fck { + #clock-cells = <0>; + compatible = "ti,composite-mux-clock"; + clock-output-names = "usim_mux_fck"; + clocks = <&sys_ck>, <&sys_d2_ck>, <&omap_96m_d2_fck>, <&omap_96m_d4_fck>, <&omap_96m_d8_fck>, <&omap_96m_d10_fck>, <&dpll5_m2_d4_ck>, <&dpll5_m2_d8_ck>, <&dpll5_m2_d16_ck>, <&dpll5_m2_d20_ck>; + ti,bit-shift = <3>; + ti,index-starts-at-one; + }; }; usim_fck: usim_fck { @@ -155,12 +190,19 @@ clocks = <&usim_gate_fck>, <&usim_mux_fck>; }; - usim_ick: usim_ick@c10 { - #clock-cells = <0>; - compatible = "ti,omap3-interface-clock"; - clocks = <&wkup_l4_ick>; - reg = <0x0c10>; - ti,bit-shift = <9>; + clock@c10 { + compatible = "ti,clksel"; + reg = <0xc10>; + #clock-cells = <2>; + #address-cells = <0>; + + usim_ick: clock-usim-ick { + #clock-cells = <0>; + compatible = "ti,omap3-interface-clock"; + clock-output-names = "usim_ick"; + clocks = <&wkup_l4_ick>; + ti,bit-shift = <9>; + }; }; }; diff --git a/arch/arm/boot/dts/omap3xxx-clocks.dtsi b/arch/arm/boot/dts/omap3xxx-clocks.dtsi index 0656c32439d2..2e13ca11ceea 100644 --- a/arch/arm/boot/dts/omap3xxx-clocks.dtsi +++ b/arch/arm/boot/dts/omap3xxx-clocks.dtsi @@ -78,12 +78,35 @@ }; &scm_clocks { - mcbsp5_mux_fck: mcbsp5_mux_fck@68 { - #clock-cells = <0>; - compatible = "ti,composite-mux-clock"; - clocks = <&core_96m_fck>, <&mcbsp_clks>; - ti,bit-shift = <4>; + /* CONTROL_DEVCONF1 */ + clock@68 { + compatible = "ti,clksel"; reg = <0x68>; + #clock-cells = <2>; + #address-cells = <0>; + + mcbsp5_mux_fck: clock-mcbsp5-mux-fck { + #clock-cells = <0>; + compatible = "ti,composite-mux-clock"; + clock-output-names = "mcbsp5_mux_fck"; + clocks = <&core_96m_fck>, <&mcbsp_clks>; + ti,bit-shift = <4>; + }; + + mcbsp3_mux_fck: clock-mcbsp3-mux-fck { + #clock-cells = <0>; + compatible = "ti,composite-mux-clock"; + clock-output-names = "mcbsp3_mux_fck"; + clocks = <&per_96m_fck>, <&mcbsp_clks>; + }; + + mcbsp4_mux_fck: clock-mcbsp4-mux-fck { + #clock-cells = <0>; + compatible = "ti,composite-mux-clock"; + clock-output-names = "mcbsp4_mux_fck"; + clocks = <&per_96m_fck>, <&mcbsp_clks>; + ti,bit-shift = <2>; + }; }; mcbsp5_fck: mcbsp5_fck { @@ -92,12 +115,28 @@ clocks = <&mcbsp5_gate_fck>, <&mcbsp5_mux_fck>; }; - mcbsp1_mux_fck: mcbsp1_mux_fck@4 { - #clock-cells = <0>; - compatible = "ti,composite-mux-clock"; - clocks = <&core_96m_fck>, <&mcbsp_clks>; - ti,bit-shift = <2>; - reg = <0x04>; + /* CONTROL_DEVCONF0 */ + clock@4 { + compatible = "ti,clksel"; + reg = <0x4>; + #clock-cells = <2>; + #address-cells = <0>; + + mcbsp1_mux_fck: clock-mcbsp1-mux-fck { + #clock-cells = <0>; + compatible = "ti,composite-mux-clock"; + clock-output-names = "mcbsp1_mux_fck"; + clocks = <&core_96m_fck>, <&mcbsp_clks>; + ti,bit-shift = <2>; + }; + + mcbsp2_mux_fck: clock-mcbsp2-mux-fck { + #clock-cells = <0>; + compatible = "ti,composite-mux-clock"; + clock-output-names = "mcbsp2_mux_fck"; + clocks = <&per_96m_fck>, <&mcbsp_clks>; + ti,bit-shift = <6>; + }; }; mcbsp1_fck: mcbsp1_fck { @@ -106,41 +145,18 @@ clocks = <&mcbsp1_gate_fck>, <&mcbsp1_mux_fck>; }; - mcbsp2_mux_fck: mcbsp2_mux_fck@4 { - #clock-cells = <0>; - compatible = "ti,composite-mux-clock"; - clocks = <&per_96m_fck>, <&mcbsp_clks>; - ti,bit-shift = <6>; - reg = <0x04>; - }; - mcbsp2_fck: mcbsp2_fck { #clock-cells = <0>; compatible = "ti,composite-clock"; clocks = <&mcbsp2_gate_fck>, <&mcbsp2_mux_fck>; }; - mcbsp3_mux_fck: mcbsp3_mux_fck@68 { - #clock-cells = <0>; - compatible = "ti,composite-mux-clock"; - clocks = <&per_96m_fck>, <&mcbsp_clks>; - reg = <0x68>; - }; - mcbsp3_fck: mcbsp3_fck { #clock-cells = <0>; compatible = "ti,composite-clock"; clocks = <&mcbsp3_gate_fck>, <&mcbsp3_mux_fck>; }; - mcbsp4_mux_fck: mcbsp4_mux_fck@68 { - #clock-cells = <0>; - compatible = "ti,composite-mux-clock"; - clocks = <&per_96m_fck>, <&mcbsp_clks>; - ti,bit-shift = <2>; - reg = <0x68>; - }; - mcbsp4_fck: mcbsp4_fck { #clock-cells = <0>; compatible = "ti,composite-clock"; @@ -238,14 +254,87 @@ reg = <0x0d00>, <0x0d20>, <0x0d40>, <0x0d30>; }; - dpll3_m3_ck: dpll3_m3_ck@1140 { - #clock-cells = <0>; - compatible = "ti,divider-clock"; - clocks = <&dpll3_ck>; - ti,bit-shift = <16>; - ti,max-div = <31>; + /* CM_CLKSEL1_EMU */ + clock@1140 { + compatible = "ti,clksel"; reg = <0x1140>; - ti,index-starts-at-one; + #clock-cells = <2>; + #address-cells = <0>; + + dpll3_m3_ck: clock-dpll3-m3 { + #clock-cells = <0>; + compatible = "ti,divider-clock"; + clock-output-names = "dpll3_m3_ck"; + clocks = <&dpll3_ck>; + ti,bit-shift = <16>; + ti,max-div = <31>; + ti,index-starts-at-one; + }; + + dpll4_m6_ck: clock-dpll4-m6 { + #clock-cells = <0>; + compatible = "ti,divider-clock"; + clock-output-names = "dpll4_m6_ck"; + clocks = <&dpll4_ck>; + ti,bit-shift = <24>; + ti,max-div = <63>; + ti,index-starts-at-one; + }; + + emu_src_mux_ck: clock-emu-src-mux { + #clock-cells = <0>; + compatible = "ti,mux-clock"; + clock-output-names = "emu_src_mux_ck"; + clocks = <&sys_ck>, <&emu_core_alwon_ck>, <&emu_per_alwon_ck>, <&emu_mpu_alwon_ck>; + }; + + pclk_fck: clock-pclk-fck { + #clock-cells = <0>; + compatible = "ti,divider-clock"; + clock-output-names = "pclk_fck"; + clocks = <&emu_src_ck>; + ti,bit-shift = <8>; + ti,max-div = <7>; + ti,index-starts-at-one; + }; + + pclkx2_fck: clock-pclkx2-fck { + #clock-cells = <0>; + compatible = "ti,divider-clock"; + clock-output-names = "pclkx2_fck"; + clocks = <&emu_src_ck>; + ti,bit-shift = <6>; + ti,max-div = <3>; + ti,index-starts-at-one; + }; + + atclk_fck: clock-atclk-fck { + #clock-cells = <0>; + compatible = "ti,divider-clock"; + clock-output-names = "atclk_fck"; + clocks = <&emu_src_ck>; + ti,bit-shift = <4>; + ti,max-div = <3>; + ti,index-starts-at-one; + }; + + traceclk_src_fck: clock-traceclk-src-fck { + #clock-cells = <0>; + compatible = "ti,mux-clock"; + clock-output-names = "traceclk_src_fck"; + clocks = <&sys_ck>, <&emu_core_alwon_ck>, <&emu_per_alwon_ck>, <&emu_mpu_alwon_ck>; + ti,bit-shift = <2>; + }; + + traceclk_fck: clock-traceclk-fck { + #clock-cells = <0>; + compatible = "ti,divider-clock"; + clock-output-names = "traceclk_fck"; + clocks = <&traceclk_src_fck>; + ti,bit-shift = <11>; + ti,max-div = <7>; + ti,index-starts-at-one; + }; }; dpll3_m3x2_mul_ck: dpll3_m3x2_mul_ck { @@ -285,16 +374,6 @@ clock-frequency = <0x0>; }; - dpll3_m2_ck: dpll3_m2_ck@d40 { - #clock-cells = <0>; - compatible = "ti,divider-clock"; - clocks = <&dpll3_ck>; - ti,bit-shift = <27>; - ti,max-div = <31>; - reg = <0x0d40>; - ti,index-starts-at-one; - }; - core_ck: core_ck { #clock-cells = <0>; compatible = "fixed-factor-clock"; @@ -345,22 +424,73 @@ clock-div = <1>; }; - omap_96m_fck: omap_96m_fck@d40 { - #clock-cells = <0>; - compatible = "ti,mux-clock"; - clocks = <&cm_96m_fck>, <&sys_ck>; - ti,bit-shift = <6>; - reg = <0x0d40>; - }; - - dpll4_m3_ck: dpll4_m3_ck@e40 { - #clock-cells = <0>; - compatible = "ti,divider-clock"; - clocks = <&dpll4_ck>; - ti,bit-shift = <8>; - ti,max-div = <32>; - reg = <0x0e40>; - ti,index-starts-at-one; + /* CM_CLKSEL1_PLL */ + clock@d40 { + compatible = "ti,clksel"; + reg = <0xd40>; + #clock-cells = <2>; + #address-cells = <0>; + + dpll3_m2_ck: clock-dpll3-m2 { + #clock-cells = <0>; + compatible = "ti,divider-clock"; + clock-output-names = "dpll3_m2_ck"; + clocks = <&dpll3_ck>; + ti,bit-shift = <27>; + ti,max-div = <31>; + ti,index-starts-at-one; + }; + + omap_96m_fck: clock-omap-96m-fck { + #clock-cells = <0>; + compatible = "ti,mux-clock"; + clock-output-names = "omap_96m_fck"; + clocks = <&cm_96m_fck>, <&sys_ck>; + ti,bit-shift = <6>; + }; + + omap_54m_fck: clock-omap-54m-fck { + #clock-cells = <0>; + compatible = "ti,mux-clock"; + clock-output-names = "omap_54m_fck"; + clocks = <&dpll4_m3x2_ck>, <&sys_altclk>; + ti,bit-shift = <5>; + }; + + omap_48m_fck: clock-omap-48m-fck { + #clock-cells = <0>; + compatible = "ti,mux-clock"; + clock-output-names = "omap_48m_fck"; + clocks = <&cm_96m_d2_fck>, <&sys_altclk>; + ti,bit-shift = <3>; + }; + }; + + /* CM_CLKSEL_DSS */ + clock@e40 { + compatible = "ti,clksel"; + reg = <0xe40>; + #clock-cells = <2>; + #address-cells = <0>; + + dpll4_m3_ck: clock-dpll4-m3 { + #clock-cells = <0>; + compatible = "ti,divider-clock"; + clock-output-names = "dpll4_m3_ck"; + clocks = <&dpll4_ck>; + ti,bit-shift = <8>; + ti,max-div = <32>; + ti,index-starts-at-one; + }; + + dpll4_m4_ck: clock-dpll4-m4 { + #clock-cells = <0>; + compatible = "ti,divider-clock"; + clock-output-names = "dpll4_m4_ck"; + clocks = <&dpll4_ck>; + ti,max-div = <16>; + ti,index-starts-at-one; + }; }; dpll4_m3x2_mul_ck: dpll4_m3x2_mul_ck { @@ -380,14 +510,6 @@ ti,set-bit-to-disable; }; - omap_54m_fck: omap_54m_fck@d40 { - #clock-cells = <0>; - compatible = "ti,mux-clock"; - clocks = <&dpll4_m3x2_ck>, <&sys_altclk>; - ti,bit-shift = <5>; - reg = <0x0d40>; - }; - cm_96m_d2_fck: cm_96m_d2_fck { #clock-cells = <0>; compatible = "fixed-factor-clock"; @@ -396,14 +518,6 @@ clock-div = <2>; }; - omap_48m_fck: omap_48m_fck@d40 { - #clock-cells = <0>; - compatible = "ti,mux-clock"; - clocks = <&cm_96m_d2_fck>, <&sys_altclk>; - ti,bit-shift = <3>; - reg = <0x0d40>; - }; - omap_12m_fck: omap_12m_fck { #clock-cells = <0>; compatible = "fixed-factor-clock"; @@ -412,15 +526,6 @@ clock-div = <4>; }; - dpll4_m4_ck: dpll4_m4_ck@e40 { - #clock-cells = <0>; - compatible = "ti,divider-clock"; - clocks = <&dpll4_ck>; - ti,max-div = <16>; - reg = <0x0e40>; - ti,index-starts-at-one; - }; - dpll4_m4x2_mul_ck: dpll4_m4x2_mul_ck { #clock-cells = <0>; compatible = "ti,fixed-factor-clock"; @@ -468,16 +573,6 @@ ti,set-rate-parent; }; - dpll4_m6_ck: dpll4_m6_ck@1140 { - #clock-cells = <0>; - compatible = "ti,divider-clock"; - clocks = <&dpll4_ck>; - ti,bit-shift = <24>; - ti,max-div = <63>; - reg = <0x1140>; - ti,index-starts-at-one; - }; - dpll4_m6x2_mul_ck: dpll4_m6x2_mul_ck { #clock-cells = <0>; compatible = "fixed-factor-clock"; @@ -503,19 +598,37 @@ clock-div = <1>; }; - clkout2_src_gate_ck: clkout2_src_gate_ck@d70 { - #clock-cells = <0>; - compatible = "ti,composite-no-wait-gate-clock"; - clocks = <&core_ck>; - ti,bit-shift = <7>; - reg = <0x0d70>; - }; - - clkout2_src_mux_ck: clkout2_src_mux_ck@d70 { - #clock-cells = <0>; - compatible = "ti,composite-mux-clock"; - clocks = <&core_ck>, <&sys_ck>, <&cm_96m_fck>, <&omap_54m_fck>; - reg = <0x0d70>; + /* CM_CLKOUT_CTRL */ + clock@d70 { + compatible = "ti,clksel"; + reg = <0xd70>; + #clock-cells = <2>; + #address-cells = <0>; + + clkout2_src_gate_ck: clock-clkout2-src-gate { + #clock-cells = <0>; + compatible = "ti,composite-no-wait-gate-clock"; + clock-output-names = "clkout2_src_gate_ck"; + clocks = <&core_ck>; + ti,bit-shift = <7>; + }; + + clkout2_src_mux_ck: clock-clkout2-src-mux { + #clock-cells = <0>; + compatible = "ti,composite-mux-clock"; + clock-output-names = "clkout2_src_mux_ck"; + clocks = <&core_ck>, <&sys_ck>, <&cm_96m_fck>, <&omap_54m_fck>; + }; + + sys_clkout2: clock-sys-clkout2 { + #clock-cells = <0>; + compatible = "ti,divider-clock"; + clock-output-names = "sys_clkout2"; + clocks = <&clkout2_src_ck>; + ti,bit-shift = <3>; + ti,max-div = <64>; + ti,index-power-of-two; + }; }; clkout2_src_ck: clkout2_src_ck { @@ -524,16 +637,6 @@ clocks = <&clkout2_src_gate_ck>, <&clkout2_src_mux_ck>; }; - sys_clkout2: sys_clkout2@d70 { - #clock-cells = <0>; - compatible = "ti,divider-clock"; - clocks = <&clkout2_src_ck>; - ti,bit-shift = <3>; - ti,max-div = <64>; - reg = <0x0d70>; - ti,index-power-of-two; - }; - mpu_ck: mpu_ck { #clock-cells = <0>; compatible = "fixed-factor-clock"; @@ -558,49 +661,208 @@ clock-div = <1>; }; - l3_ick: l3_ick@a40 { - #clock-cells = <0>; - compatible = "ti,divider-clock"; - clocks = <&core_ck>; - ti,max-div = <3>; - reg = <0x0a40>; - ti,index-starts-at-one; - }; - - l4_ick: l4_ick@a40 { - #clock-cells = <0>; - compatible = "ti,divider-clock"; - clocks = <&l3_ick>; - ti,bit-shift = <2>; - ti,max-div = <3>; - reg = <0x0a40>; - ti,index-starts-at-one; - }; - - rm_ick: rm_ick@c40 { - #clock-cells = <0>; - compatible = "ti,divider-clock"; - clocks = <&l4_ick>; - ti,bit-shift = <1>; - ti,max-div = <3>; - reg = <0x0c40>; - ti,index-starts-at-one; - }; - - gpt10_gate_fck: gpt10_gate_fck@a00 { - #clock-cells = <0>; - compatible = "ti,composite-gate-clock"; - clocks = <&sys_ck>; - ti,bit-shift = <11>; - reg = <0x0a00>; - }; - - gpt10_mux_fck: gpt10_mux_fck@a40 { - #clock-cells = <0>; - compatible = "ti,composite-mux-clock"; - clocks = <&omap_32k_fck>, <&sys_ck>; - ti,bit-shift = <6>; - reg = <0x0a40>; + /* CM_CLKSEL_CORE */ + clock@a40 { + compatible = "ti,clksel"; + reg = <0xa40>; + #clock-cells = <2>; + #address-cells = <0>; + + l3_ick: clock-l3-ick { + #clock-cells = <0>; + compatible = "ti,divider-clock"; + clock-output-names = "l3_ick"; + clocks = <&core_ck>; + ti,max-div = <3>; + ti,index-starts-at-one; + }; + + l4_ick: clock-l4-ick { + #clock-cells = <0>; + compatible = "ti,divider-clock"; + clock-output-names = "l4_ick"; + clocks = <&l3_ick>; + ti,bit-shift = <2>; + ti,max-div = <3>; + ti,index-starts-at-one; + }; + + gpt10_mux_fck: clock-gpt10-mux-fck { + #clock-cells = <0>; + compatible = "ti,composite-mux-clock"; + clock-output-names = "gpt10_mux_fck"; + clocks = <&omap_32k_fck>, <&sys_ck>; + ti,bit-shift = <6>; + }; + + gpt11_mux_fck: clock-gpt11-mux-fck { + #clock-cells = <0>; + compatible = "ti,composite-mux-clock"; + clock-output-names = "gpt11_mux_fck"; + clocks = <&omap_32k_fck>, <&sys_ck>; + ti,bit-shift = <7>; + }; + }; + + /* CM_CLKSEL_WKUP */ + clock@c40 { + compatible = "ti,clksel"; + reg = <0xc40>; + #clock-cells = <2>; + #address-cells = <0>; + + rm_ick: clock-rm-ick { + #clock-cells = <0>; + compatible = "ti,divider-clock"; + clock-output-names = "rm_ick"; + clocks = <&l4_ick>; + ti,bit-shift = <1>; + ti,max-div = <3>; + ti,index-starts-at-one; + }; + + gpt1_mux_fck: clock-gpt1-mux-fck { + #clock-cells = <0>; + compatible = "ti,composite-mux-clock"; + clock-output-names = "gpt1_mux_fck"; + clocks = <&omap_32k_fck>, <&sys_ck>; + }; + }; + + /* CM_FCLKEN1_CORE */ + clock@a00 { + compatible = "ti,clksel"; + reg = <0xa00>; + #clock-cells = <2>; + #address-cells = <0>; + + gpt10_gate_fck: clock-gpt10-gate-fck { + #clock-cells = <0>; + compatible = "ti,composite-gate-clock"; + clock-output-names = "gpt10_gate_fck"; + clocks = <&sys_ck>; + ti,bit-shift = <11>; + }; + + gpt11_gate_fck: clock-gpt11-gate-fck { + #clock-cells = <0>; + compatible = "ti,composite-gate-clock"; + clock-output-names = "gpt11_gate_fck"; + clocks = <&sys_ck>; + ti,bit-shift = <12>; + }; + + mmchs2_fck: clock-mmchs2-fck { + #clock-cells = <0>; + compatible = "ti,wait-gate-clock"; + clock-output-names = "mmchs2_fck"; + clocks = <&core_96m_fck>; + ti,bit-shift = <25>; + }; + + mmchs1_fck: clock-mmchs1-fck { + #clock-cells = <0>; + compatible = "ti,wait-gate-clock"; + clock-output-names = "mmchs1_fck"; + clocks = <&core_96m_fck>; + ti,bit-shift = <24>; + }; + + i2c3_fck: clock-i2c3-fck { + #clock-cells = <0>; + compatible = "ti,wait-gate-clock"; + clock-output-names = "i2c3_fck"; + clocks = <&core_96m_fck>; + ti,bit-shift = <17>; + }; + + i2c2_fck: clock-i2c2-fck { + #clock-cells = <0>; + compatible = "ti,wait-gate-clock"; + clock-output-names = "i2c2_fck"; + clocks = <&core_96m_fck>; + ti,bit-shift = <16>; + }; + + i2c1_fck: clock-i2c1-fck { + #clock-cells = <0>; + compatible = "ti,wait-gate-clock"; + clock-output-names = "i2c1_fck"; + clocks = <&core_96m_fck>; + ti,bit-shift = <15>; + }; + + mcbsp5_gate_fck: clock-mcbsp5-gate-fck { + #clock-cells = <0>; + compatible = "ti,composite-gate-clock"; + clock-output-names = "mcbsp5_gate_fck"; + clocks = <&mcbsp_clks>; + ti,bit-shift = <10>; + }; + + mcbsp1_gate_fck: clock-mcbsp1-gate-fck { + #clock-cells = <0>; + compatible = "ti,composite-gate-clock"; + clock-output-names = "mcbsp1_gate_fck"; + clocks = <&mcbsp_clks>; + ti,bit-shift = <9>; + }; + + mcspi4_fck: clock-mcspi4-fck { + #clock-cells = <0>; + compatible = "ti,wait-gate-clock"; + clock-output-names = "mcspi4_fck"; + clocks = <&core_48m_fck>; + ti,bit-shift = <21>; + }; + + mcspi3_fck: clock-mcspi3-fck { + #clock-cells = <0>; + compatible = "ti,wait-gate-clock"; + clock-output-names = "mcspi3_fck"; + clocks = <&core_48m_fck>; + ti,bit-shift = <20>; + }; + + mcspi2_fck: clock-mcspi2-fck { + #clock-cells = <0>; + compatible = "ti,wait-gate-clock"; + clock-output-names = "mcspi2_fck"; + clocks = <&core_48m_fck>; + ti,bit-shift = <19>; + }; + + mcspi1_fck: clock-mcspi1-fck { + #clock-cells = <0>; + compatible = "ti,wait-gate-clock"; + clock-output-names = "mcspi1_fck"; + clocks = <&core_48m_fck>; + ti,bit-shift = <18>; + }; + + uart2_fck: clock-uart2-fck { + #clock-cells = <0>; + compatible = "ti,wait-gate-clock"; + clock-output-names = "uart2_fck"; + clocks = <&core_48m_fck>; + ti,bit-shift = <14>; + }; + + uart1_fck: clock-uart1-fck { + #clock-cells = <0>; + compatible = "ti,wait-gate-clock"; + clock-output-names = "uart1_fck"; + clocks = <&core_48m_fck>; + ti,bit-shift = <13>; + }; + + hdq_fck: clock-hdq-fck { + #clock-cells = <0>; + compatible = "ti,wait-gate-clock"; + clock-output-names = "hdq_fck"; + clocks = <&core_12m_fck>; + ti,bit-shift = <22>; + }; }; gpt10_fck: gpt10_fck { @@ -609,22 +871,6 @@ clocks = <&gpt10_gate_fck>, <&gpt10_mux_fck>; }; - gpt11_gate_fck: gpt11_gate_fck@a00 { - #clock-cells = <0>; - compatible = "ti,composite-gate-clock"; - clocks = <&sys_ck>; - ti,bit-shift = <12>; - reg = <0x0a00>; - }; - - gpt11_mux_fck: gpt11_mux_fck@a40 { - #clock-cells = <0>; - compatible = "ti,composite-mux-clock"; - clocks = <&omap_32k_fck>, <&sys_ck>; - ti,bit-shift = <7>; - reg = <0x0a40>; - }; - gpt11_fck: gpt11_fck { #clock-cells = <0>; compatible = "ti,composite-clock"; @@ -639,62 +885,6 @@ clock-div = <1>; }; - mmchs2_fck: mmchs2_fck@a00 { - #clock-cells = <0>; - compatible = "ti,wait-gate-clock"; - clocks = <&core_96m_fck>; - reg = <0x0a00>; - ti,bit-shift = <25>; - }; - - mmchs1_fck: mmchs1_fck@a00 { - #clock-cells = <0>; - compatible = "ti,wait-gate-clock"; - clocks = <&core_96m_fck>; - reg = <0x0a00>; - ti,bit-shift = <24>; - }; - - i2c3_fck: i2c3_fck@a00 { - #clock-cells = <0>; - compatible = "ti,wait-gate-clock"; - clocks = <&core_96m_fck>; - reg = <0x0a00>; - ti,bit-shift = <17>; - }; - - i2c2_fck: i2c2_fck@a00 { - #clock-cells = <0>; - compatible = "ti,wait-gate-clock"; - clocks = <&core_96m_fck>; - reg = <0x0a00>; - ti,bit-shift = <16>; - }; - - i2c1_fck: i2c1_fck@a00 { - #clock-cells = <0>; - compatible = "ti,wait-gate-clock"; - clocks = <&core_96m_fck>; - reg = <0x0a00>; - ti,bit-shift = <15>; - }; - - mcbsp5_gate_fck: mcbsp5_gate_fck@a00 { - #clock-cells = <0>; - compatible = "ti,composite-gate-clock"; - clocks = <&mcbsp_clks>; - ti,bit-shift = <10>; - reg = <0x0a00>; - }; - - mcbsp1_gate_fck: mcbsp1_gate_fck@a00 { - #clock-cells = <0>; - compatible = "ti,composite-gate-clock"; - clocks = <&mcbsp_clks>; - ti,bit-shift = <9>; - reg = <0x0a00>; - }; - core_48m_fck: core_48m_fck { #clock-cells = <0>; compatible = "fixed-factor-clock"; @@ -703,54 +893,6 @@ clock-div = <1>; }; - mcspi4_fck: mcspi4_fck@a00 { - #clock-cells = <0>; - compatible = "ti,wait-gate-clock"; - clocks = <&core_48m_fck>; - reg = <0x0a00>; - ti,bit-shift = <21>; - }; - - mcspi3_fck: mcspi3_fck@a00 { - #clock-cells = <0>; - compatible = "ti,wait-gate-clock"; - clocks = <&core_48m_fck>; - reg = <0x0a00>; - ti,bit-shift = <20>; - }; - - mcspi2_fck: mcspi2_fck@a00 { - #clock-cells = <0>; - compatible = "ti,wait-gate-clock"; - clocks = <&core_48m_fck>; - reg = <0x0a00>; - ti,bit-shift = <19>; - }; - - mcspi1_fck: mcspi1_fck@a00 { - #clock-cells = <0>; - compatible = "ti,wait-gate-clock"; - clocks = <&core_48m_fck>; - reg = <0x0a00>; - ti,bit-shift = <18>; - }; - - uart2_fck: uart2_fck@a00 { - #clock-cells = <0>; - compatible = "ti,wait-gate-clock"; - clocks = <&core_48m_fck>; - reg = <0x0a00>; - ti,bit-shift = <14>; - }; - - uart1_fck: uart1_fck@a00 { - #clock-cells = <0>; - compatible = "ti,wait-gate-clock"; - clocks = <&core_48m_fck>; - reg = <0x0a00>; - ti,bit-shift = <13>; - }; - core_12m_fck: core_12m_fck { #clock-cells = <0>; compatible = "fixed-factor-clock"; @@ -759,14 +901,6 @@ clock-div = <1>; }; - hdq_fck: hdq_fck@a00 { - #clock-cells = <0>; - compatible = "ti,wait-gate-clock"; - clocks = <&core_12m_fck>; - reg = <0x0a00>; - ti,bit-shift = <22>; - }; - core_l3_ick: core_l3_ick { #clock-cells = <0>; compatible = "fixed-factor-clock"; @@ -775,12 +909,172 @@ clock-div = <1>; }; - sdrc_ick: sdrc_ick@a10 { - #clock-cells = <0>; - compatible = "ti,wait-gate-clock"; - clocks = <&core_l3_ick>; - reg = <0x0a10>; - ti,bit-shift = <1>; + /* CM_ICLKEN1_CORE */ + clock@a10 { + compatible = "ti,clksel"; + reg = <0xa10>; + #clock-cells = <2>; + #address-cells = <0>; + + sdrc_ick: clock-sdrc-ick { + #clock-cells = <0>; + compatible = "ti,wait-gate-clock"; + clock-output-names = "sdrc_ick"; + clocks = <&core_l3_ick>; + ti,bit-shift = <1>; + }; + + mmchs2_ick: clock-mmchs2-ick { + #clock-cells = <0>; + compatible = "ti,omap3-interface-clock"; + clock-output-names = "mmchs2_ick"; + clocks = <&core_l4_ick>; + ti,bit-shift = <25>; + }; + + mmchs1_ick: clock-mmchs1-ick { + #clock-cells = <0>; + compatible = "ti,omap3-interface-clock"; + clock-output-names = "mmchs1_ick"; + clocks = <&core_l4_ick>; + ti,bit-shift = <24>; + }; + + hdq_ick: clock-hdq-ick { + #clock-cells = <0>; + compatible = "ti,omap3-interface-clock"; + clock-output-names = "hdq_ick"; + clocks = <&core_l4_ick>; + ti,bit-shift = <22>; + }; + + mcspi4_ick: clock-mcspi4-ick { + #clock-cells = <0>; + compatible = "ti,omap3-interface-clock"; + clock-output-names = "mcspi4_ick"; + clocks = <&core_l4_ick>; + ti,bit-shift = <21>; + }; + + mcspi3_ick: clock-mcspi3-ick { + #clock-cells = <0>; + compatible = "ti,omap3-interface-clock"; + clock-output-names = "mcspi3_ick"; + clocks = <&core_l4_ick>; + ti,bit-shift = <20>; + }; + + mcspi2_ick: clock-mcspi2-ick { + #clock-cells = <0>; + compatible = "ti,omap3-interface-clock"; + clock-output-names = "mcspi2_ick"; + clocks = <&core_l4_ick>; + ti,bit-shift = <19>; + }; + + mcspi1_ick: clock-mcspi1-ick { + #clock-cells = <0>; + compatible = "ti,omap3-interface-clock"; + clock-output-names = "mcspi1_ick"; + clocks = <&core_l4_ick>; + ti,bit-shift = <18>; + }; + + i2c3_ick: clock-i2c3-ick { + #clock-cells = <0>; + compatible = "ti,omap3-interface-clock"; + clock-output-names = "i2c3_ick"; + clocks = <&core_l4_ick>; + ti,bit-shift = <17>; + }; + + i2c2_ick: clock-i2c2-ick { + #clock-cells = <0>; + compatible = "ti,omap3-interface-clock"; + clock-output-names = "i2c2_ick"; + clocks = <&core_l4_ick>; + ti,bit-shift = <16>; + }; + + i2c1_ick: clock-i2c1-ick { + #clock-cells = <0>; + compatible = "ti,omap3-interface-clock"; + clock-output-names = "i2c1_ick"; + clocks = <&core_l4_ick>; + ti,bit-shift = <15>; + }; + + uart2_ick: clock-uart2-ick { + #clock-cells = <0>; + compatible = "ti,omap3-interface-clock"; + clock-output-names = "uart2_ick"; + clocks = <&core_l4_ick>; + ti,bit-shift = <14>; + }; + + uart1_ick: clock-uart1-ick { + #clock-cells = <0>; + compatible = "ti,omap3-interface-clock"; + clock-output-names = "uart1_ick"; + clocks = <&core_l4_ick>; + ti,bit-shift = <13>; + }; + + gpt11_ick: clock-gpt11-ick { + #clock-cells = <0>; + compatible = "ti,omap3-interface-clock"; + clock-output-names = "gpt11_ick"; + clocks = <&core_l4_ick>; + ti,bit-shift = <12>; + }; + + gpt10_ick: clock-gpt10-ick { + #clock-cells = <0>; + compatible = "ti,omap3-interface-clock"; + clock-output-names = "gpt10_ick"; + clocks = <&core_l4_ick>; + ti,bit-shift = <11>; + }; + + mcbsp5_ick: clock-mcbsp5-ick { + #clock-cells = <0>; + compatible = "ti,omap3-interface-clock"; + clock-output-names = "mcbsp5_ick"; + clocks = <&core_l4_ick>; + ti,bit-shift = <10>; + }; + + mcbsp1_ick: clock-mcbsp1-ick { + #clock-cells = <0>; + compatible = "ti,omap3-interface-clock"; + clock-output-names = "mcbsp1_ick"; + clocks = <&core_l4_ick>; + ti,bit-shift = <9>; + }; + + omapctrl_ick: clock-omapctrl-ick { + #clock-cells = <0>; + compatible = "ti,omap3-interface-clock"; + clock-output-names = "omapctrl_ick"; + clocks = <&core_l4_ick>; + ti,bit-shift = <6>; + }; + + aes2_ick: clock-aes2-ick { + #clock-cells = <0>; + compatible = "ti,omap3-interface-clock"; + clock-output-names = "aes2_ick"; + clocks = <&core_l4_ick>; + ti,bit-shift = <28>; + }; + + sha12_ick: clock-sha12-ick { + #clock-cells = <0>; + compatible = "ti,omap3-interface-clock"; + clock-output-names = "sha12_ick"; + clocks = <&core_l4_ick>; + ti,bit-shift = <27>; + }; }; gpmc_fck: gpmc_fck { @@ -799,164 +1093,36 @@ clock-div = <1>; }; - mmchs2_ick: mmchs2_ick@a10 { - #clock-cells = <0>; - compatible = "ti,omap3-interface-clock"; - clocks = <&core_l4_ick>; - reg = <0x0a10>; - ti,bit-shift = <25>; - }; - - mmchs1_ick: mmchs1_ick@a10 { - #clock-cells = <0>; - compatible = "ti,omap3-interface-clock"; - clocks = <&core_l4_ick>; - reg = <0x0a10>; - ti,bit-shift = <24>; - }; - - hdq_ick: hdq_ick@a10 { - #clock-cells = <0>; - compatible = "ti,omap3-interface-clock"; - clocks = <&core_l4_ick>; - reg = <0x0a10>; - ti,bit-shift = <22>; - }; - - mcspi4_ick: mcspi4_ick@a10 { - #clock-cells = <0>; - compatible = "ti,omap3-interface-clock"; - clocks = <&core_l4_ick>; - reg = <0x0a10>; - ti,bit-shift = <21>; - }; - - mcspi3_ick: mcspi3_ick@a10 { - #clock-cells = <0>; - compatible = "ti,omap3-interface-clock"; - clocks = <&core_l4_ick>; - reg = <0x0a10>; - ti,bit-shift = <20>; - }; - - mcspi2_ick: mcspi2_ick@a10 { - #clock-cells = <0>; - compatible = "ti,omap3-interface-clock"; - clocks = <&core_l4_ick>; - reg = <0x0a10>; - ti,bit-shift = <19>; - }; - - mcspi1_ick: mcspi1_ick@a10 { - #clock-cells = <0>; - compatible = "ti,omap3-interface-clock"; - clocks = <&core_l4_ick>; - reg = <0x0a10>; - ti,bit-shift = <18>; - }; - - i2c3_ick: i2c3_ick@a10 { - #clock-cells = <0>; - compatible = "ti,omap3-interface-clock"; - clocks = <&core_l4_ick>; - reg = <0x0a10>; - ti,bit-shift = <17>; - }; - - i2c2_ick: i2c2_ick@a10 { - #clock-cells = <0>; - compatible = "ti,omap3-interface-clock"; - clocks = <&core_l4_ick>; - reg = <0x0a10>; - ti,bit-shift = <16>; - }; - - i2c1_ick: i2c1_ick@a10 { - #clock-cells = <0>; - compatible = "ti,omap3-interface-clock"; - clocks = <&core_l4_ick>; - reg = <0x0a10>; - ti,bit-shift = <15>; - }; - - uart2_ick: uart2_ick@a10 { - #clock-cells = <0>; - compatible = "ti,omap3-interface-clock"; - clocks = <&core_l4_ick>; - reg = <0x0a10>; - ti,bit-shift = <14>; - }; - - uart1_ick: uart1_ick@a10 { - #clock-cells = <0>; - compatible = "ti,omap3-interface-clock"; - clocks = <&core_l4_ick>; - reg = <0x0a10>; - ti,bit-shift = <13>; - }; - - gpt11_ick: gpt11_ick@a10 { - #clock-cells = <0>; - compatible = "ti,omap3-interface-clock"; - clocks = <&core_l4_ick>; - reg = <0x0a10>; - ti,bit-shift = <12>; - }; - - gpt10_ick: gpt10_ick@a10 { - #clock-cells = <0>; - compatible = "ti,omap3-interface-clock"; - clocks = <&core_l4_ick>; - reg = <0x0a10>; - ti,bit-shift = <11>; - }; - - mcbsp5_ick: mcbsp5_ick@a10 { - #clock-cells = <0>; - compatible = "ti,omap3-interface-clock"; - clocks = <&core_l4_ick>; - reg = <0x0a10>; - ti,bit-shift = <10>; - }; - - mcbsp1_ick: mcbsp1_ick@a10 { - #clock-cells = <0>; - compatible = "ti,omap3-interface-clock"; - clocks = <&core_l4_ick>; - reg = <0x0a10>; - ti,bit-shift = <9>; - }; - - omapctrl_ick: omapctrl_ick@a10 { - #clock-cells = <0>; - compatible = "ti,omap3-interface-clock"; - clocks = <&core_l4_ick>; - reg = <0x0a10>; - ti,bit-shift = <6>; - }; - - dss_tv_fck: dss_tv_fck@e00 { - #clock-cells = <0>; - compatible = "ti,gate-clock"; - clocks = <&omap_54m_fck>; - reg = <0x0e00>; - ti,bit-shift = <2>; - }; - - dss_96m_fck: dss_96m_fck@e00 { - #clock-cells = <0>; - compatible = "ti,gate-clock"; - clocks = <&omap_96m_fck>; - reg = <0x0e00>; - ti,bit-shift = <2>; - }; - - dss2_alwon_fck: dss2_alwon_fck@e00 { - #clock-cells = <0>; - compatible = "ti,gate-clock"; - clocks = <&sys_ck>; - reg = <0x0e00>; - ti,bit-shift = <1>; + /* CM_FCLKEN_DSS */ + clock@e00 { + compatible = "ti,clksel"; + reg = <0xe00>; + #clock-cells = <2>; + #address-cells = <0>; + + dss_tv_fck: clock-dss-tv-fck { + #clock-cells = <0>; + compatible = "ti,gate-clock"; + clock-output-names = "dss_tv_fck"; + clocks = <&omap_54m_fck>; + ti,bit-shift = <2>; + }; + + dss_96m_fck: clock-dss-96m-fck { + #clock-cells = <0>; + compatible = "ti,gate-clock"; + clock-output-names = "dss_96m_fck"; + clocks = <&omap_96m_fck>; + ti,bit-shift = <2>; + }; + + dss2_alwon_fck: clock-dss2-alwon-fck { + #clock-cells = <0>; + compatible = "ti,gate-clock"; + clock-output-names = "dss2_alwon_fck"; + clocks = <&sys_ck>; + ti,bit-shift = <1>; + }; }; dummy_ck: dummy_ck { @@ -965,19 +1131,36 @@ clock-frequency = <0>; }; - gpt1_gate_fck: gpt1_gate_fck@c00 { - #clock-cells = <0>; - compatible = "ti,composite-gate-clock"; - clocks = <&sys_ck>; - ti,bit-shift = <0>; - reg = <0x0c00>; - }; - - gpt1_mux_fck: gpt1_mux_fck@c40 { - #clock-cells = <0>; - compatible = "ti,composite-mux-clock"; - clocks = <&omap_32k_fck>, <&sys_ck>; - reg = <0x0c40>; + /* CM_FCLKEN_WKUP */ + clock@c00 { + compatible = "ti,clksel"; + reg = <0xc00>; + #clock-cells = <2>; + #address-cells = <0>; + + gpt1_gate_fck: clock-gpt1-gate-fck { + #clock-cells = <0>; + compatible = "ti,composite-gate-clock"; + clock-output-names = "gpt1_gate_fck"; + clocks = <&sys_ck>; + ti,bit-shift = <0>; + }; + + gpio1_dbck: clock-gpio1-dbck { + #clock-cells = <0>; + compatible = "ti,gate-clock"; + clock-output-names = "gpio1_dbck"; + clocks = <&wkup_32k_fck>; + ti,bit-shift = <3>; + }; + + wdt2_fck: clock-wdt2-fck { + #clock-cells = <0>; + compatible = "ti,wait-gate-clock"; + clock-output-names = "wdt2_fck"; + clocks = <&wkup_32k_fck>; + ti,bit-shift = <5>; + }; }; gpt1_fck: gpt1_fck { @@ -986,14 +1169,6 @@ clocks = <&gpt1_gate_fck>, <&gpt1_mux_fck>; }; - aes2_ick: aes2_ick@a10 { - #clock-cells = <0>; - compatible = "ti,omap3-interface-clock"; - clocks = <&core_l4_ick>; - ti,bit-shift = <28>; - reg = <0x0a10>; - }; - wkup_32k_fck: wkup_32k_fck { #clock-cells = <0>; compatible = "fixed-factor-clock"; @@ -1002,76 +1177,60 @@ clock-div = <1>; }; - gpio1_dbck: gpio1_dbck@c00 { - #clock-cells = <0>; - compatible = "ti,gate-clock"; - clocks = <&wkup_32k_fck>; - reg = <0x0c00>; - ti,bit-shift = <3>; - }; - - sha12_ick: sha12_ick@a10 { - #clock-cells = <0>; - compatible = "ti,omap3-interface-clock"; - clocks = <&core_l4_ick>; - reg = <0x0a10>; - ti,bit-shift = <27>; - }; - - wdt2_fck: wdt2_fck@c00 { - #clock-cells = <0>; - compatible = "ti,wait-gate-clock"; - clocks = <&wkup_32k_fck>; - reg = <0x0c00>; - ti,bit-shift = <5>; - }; - - wdt2_ick: wdt2_ick@c10 { - #clock-cells = <0>; - compatible = "ti,omap3-interface-clock"; - clocks = <&wkup_l4_ick>; - reg = <0x0c10>; - ti,bit-shift = <5>; - }; - - wdt1_ick: wdt1_ick@c10 { - #clock-cells = <0>; - compatible = "ti,omap3-interface-clock"; - clocks = <&wkup_l4_ick>; - reg = <0x0c10>; - ti,bit-shift = <4>; - }; - - gpio1_ick: gpio1_ick@c10 { - #clock-cells = <0>; - compatible = "ti,omap3-interface-clock"; - clocks = <&wkup_l4_ick>; - reg = <0x0c10>; - ti,bit-shift = <3>; - }; - - omap_32ksync_ick: omap_32ksync_ick@c10 { - #clock-cells = <0>; - compatible = "ti,omap3-interface-clock"; - clocks = <&wkup_l4_ick>; - reg = <0x0c10>; - ti,bit-shift = <2>; - }; - - gpt12_ick: gpt12_ick@c10 { - #clock-cells = <0>; - compatible = "ti,omap3-interface-clock"; - clocks = <&wkup_l4_ick>; - reg = <0x0c10>; - ti,bit-shift = <1>; - }; - - gpt1_ick: gpt1_ick@c10 { - #clock-cells = <0>; - compatible = "ti,omap3-interface-clock"; - clocks = <&wkup_l4_ick>; - reg = <0x0c10>; - ti,bit-shift = <0>; + /* CM_ICLKEN_WKUP */ + clock@c10 { + compatible = "ti,clksel"; + reg = <0xc10>; + #clock-cells = <2>; + #address-cells = <0>; + + wdt2_ick: clock-wdt2-ick { + #clock-cells = <0>; + compatible = "ti,omap3-interface-clock"; + clock-output-names = "wdt2_ick"; + clocks = <&wkup_l4_ick>; + ti,bit-shift = <5>; + }; + + wdt1_ick: clock-wdt1-ick { + #clock-cells = <0>; + compatible = "ti,omap3-interface-clock"; + clock-output-names = "wdt1_ick"; + clocks = <&wkup_l4_ick>; + ti,bit-shift = <4>; + }; + + gpio1_ick: clock-gpio1-ick { + #clock-cells = <0>; + compatible = "ti,omap3-interface-clock"; + clock-output-names = "gpio1_ick"; + clocks = <&wkup_l4_ick>; + ti,bit-shift = <3>; + }; + + omap_32ksync_ick: clock-omap-32ksync-ick { + #clock-cells = <0>; + compatible = "ti,omap3-interface-clock"; + clock-output-names = "omap_32ksync_ick"; + clocks = <&wkup_l4_ick>; + ti,bit-shift = <2>; + }; + + gpt12_ick: clock-gpt12-ick { + #clock-cells = <0>; + compatible = "ti,omap3-interface-clock"; + clock-output-names = "gpt12_ick"; + clocks = <&wkup_l4_ick>; + ti,bit-shift = <1>; + }; + + gpt1_ick: clock-gpt1-ick { + #clock-cells = <0>; + compatible = "ti,omap3-interface-clock"; + clock-output-names = "gpt1_ick"; + clocks = <&wkup_l4_ick>; + ti,bit-shift = <0>; + }; }; per_96m_fck: per_96m_fck { @@ -1090,27 +1249,227 @@ clock-div = <1>; }; - uart3_fck: uart3_fck@1000 { - #clock-cells = <0>; - compatible = "ti,wait-gate-clock"; - clocks = <&per_48m_fck>; - reg = <0x1000>; - ti,bit-shift = <11>; - }; - - gpt2_gate_fck: gpt2_gate_fck@1000 { - #clock-cells = <0>; - compatible = "ti,composite-gate-clock"; - clocks = <&sys_ck>; - ti,bit-shift = <3>; + /* CM_FCLKEN_PER */ + clock@1000 { + compatible = "ti,clksel"; reg = <0x1000>; - }; - - gpt2_mux_fck: gpt2_mux_fck@1040 { - #clock-cells = <0>; - compatible = "ti,composite-mux-clock"; - clocks = <&omap_32k_fck>, <&sys_ck>; + #clock-cells = <2>; + #address-cells = <0>; + + uart3_fck: clock-uart3-fck { + #clock-cells = <0>; + compatible = "ti,wait-gate-clock"; + clock-output-names = "uart3_fck"; + clocks = <&per_48m_fck>; + ti,bit-shift = <11>; + }; + + gpt2_gate_fck: clock-gpt2-gate-fck { + #clock-cells = <0>; + compatible = "ti,composite-gate-clock"; + clock-output-names = "gpt2_gate_fck"; + clocks = <&sys_ck>; + ti,bit-shift = <3>; + }; + + gpt3_gate_fck: clock-gpt3-gate-fck { + #clock-cells = <0>; + compatible = "ti,composite-gate-clock"; + clock-output-names = "gpt3_gate_fck"; + clocks = <&sys_ck>; + ti,bit-shift = <4>; + }; + + gpt4_gate_fck: clock-gpt4-gate-fck { + #clock-cells = <0>; + compatible = "ti,composite-gate-clock"; + clock-output-names = "gpt4_gate_fck"; + clocks = <&sys_ck>; + ti,bit-shift = <5>; + }; + + gpt5_gate_fck: clock-gpt5-gate-fck { + #clock-cells = <0>; + compatible = "ti,composite-gate-clock"; + clock-output-names = "gpt5_gate_fck"; + clocks = <&sys_ck>; + ti,bit-shift = <6>; + }; + + gpt6_gate_fck: clock-gpt6-gate-fck { + #clock-cells = <0>; + compatible = "ti,composite-gate-clock"; + clock-output-names = "gpt6_gate_fck"; + clocks = <&sys_ck>; + ti,bit-shift = <7>; + }; + + gpt7_gate_fck: clock-gpt7-gate-fck { + #clock-cells = <0>; + compatible = "ti,composite-gate-clock"; + clock-output-names = "gpt7_gate_fck"; + clocks = <&sys_ck>; + ti,bit-shift = <8>; + }; + + gpt8_gate_fck: clock-gpt8-gate-fck { + #clock-cells = <0>; + compatible = "ti,composite-gate-clock"; + clock-output-names = "gpt8_gate_fck"; + clocks = <&sys_ck>; + ti,bit-shift = <9>; + }; + + gpt9_gate_fck: clock-gpt9-gate-fck { + #clock-cells = <0>; + compatible = "ti,composite-gate-clock"; + clock-output-names = "gpt9_gate_fck"; + clocks = <&sys_ck>; + ti,bit-shift = <10>; + }; + + gpio6_dbck: clock-gpio6-dbck { + #clock-cells = <0>; + compatible = "ti,gate-clock"; + clock-output-names = "gpio6_dbck"; + clocks = <&per_32k_alwon_fck>; + ti,bit-shift = <17>; + }; + + gpio5_dbck: clock-gpio5-dbck { + #clock-cells = <0>; + compatible = "ti,gate-clock"; + clock-output-names = "gpio5_dbck"; + clocks = <&per_32k_alwon_fck>; + ti,bit-shift = <16>; + }; + + gpio4_dbck: clock-gpio4-dbck { + #clock-cells = <0>; + compatible = "ti,gate-clock"; + clock-output-names = "gpio4_dbck"; + clocks = <&per_32k_alwon_fck>; + ti,bit-shift = <15>; + }; + + gpio3_dbck: clock-gpio3-dbck { + #clock-cells = <0>; + compatible = "ti,gate-clock"; + clock-output-names = "gpio3_dbck"; + clocks = <&per_32k_alwon_fck>; + ti,bit-shift = <14>; + }; + + gpio2_dbck: clock-gpio2-dbck { + #clock-cells = <0>; + compatible = "ti,gate-clock"; + clock-output-names = "gpio2_dbck"; + clocks = <&per_32k_alwon_fck>; + ti,bit-shift = <13>; + }; + + wdt3_fck: clock-wdt3-fck { + #clock-cells = <0>; + compatible = "ti,wait-gate-clock"; + clock-output-names = "wdt3_fck"; + clocks = <&per_32k_alwon_fck>; + ti,bit-shift = <12>; + }; + + mcbsp2_gate_fck: clock-mcbsp2-gate-fck { + #clock-cells = <0>; + compatible = "ti,composite-gate-clock"; + clock-output-names = "mcbsp2_gate_fck"; + clocks = <&mcbsp_clks>; + ti,bit-shift = <0>; + }; + + mcbsp3_gate_fck: clock-mcbsp3-gate-fck { + #clock-cells = <0>; + compatible = "ti,composite-gate-clock"; + clock-output-names = "mcbsp3_gate_fck"; + clocks = <&mcbsp_clks>; + ti,bit-shift = <1>; + }; + + mcbsp4_gate_fck: clock-mcbsp4-gate-fck { + #clock-cells = <0>; + compatible = "ti,composite-gate-clock"; + clock-output-names = "mcbsp4_gate_fck"; + clocks = <&mcbsp_clks>; + ti,bit-shift = <2>; + }; + }; + + /* CM_CLKSEL_PER */ + clock@1040 { + compatible = "ti,clksel"; reg = <0x1040>; + #clock-cells = <2>; + #address-cells = <0>; + + gpt2_mux_fck: clock-gpt2-mux-fck { + #clock-cells = <0>; + compatible = "ti,composite-mux-clock"; + clock-output-names = "gpt2_mux_fck"; + clocks = <&omap_32k_fck>, <&sys_ck>; + }; + + gpt3_mux_fck: clock-gpt3-mux-fck { + #clock-cells = <0>; + compatible = "ti,composite-mux-clock"; + clock-output-names = "gpt3_mux_fck"; + clocks = <&omap_32k_fck>, <&sys_ck>; + ti,bit-shift = <1>; + }; + + gpt4_mux_fck: clock-gpt4-mux-fck { + #clock-cells = <0>; + compatible = "ti,composite-mux-clock"; + clock-output-names = "gpt4_mux_fck"; + clocks = <&omap_32k_fck>, <&sys_ck>; + ti,bit-shift = <2>; + }; + + gpt5_mux_fck: clock-gpt5-mux-fck { + #clock-cells = <0>; + compatible = "ti,composite-mux-clock"; + clock-output-names = "gpt5_mux_fck"; + clocks = <&omap_32k_fck>, <&sys_ck>; + ti,bit-shift = <3>; + }; + + gpt6_mux_fck: clock-gpt6-mux-fck { + #clock-cells = <0>; + compatible = "ti,composite-mux-clock"; + clock-output-names = "gpt6_mux_fck"; + clocks = <&omap_32k_fck>, <&sys_ck>; + ti,bit-shift = <4>; + }; + + gpt7_mux_fck: clock-gpt7-mux-fck { + #clock-cells = <0>; + compatible = "ti,composite-mux-clock"; + clock-output-names = "gpt7_mux_fck"; + clocks = <&omap_32k_fck>, <&sys_ck>; + ti,bit-shift = <5>; + }; + + gpt8_mux_fck: clock-gpt8-mux-fck { + #clock-cells = <0>; + compatible = "ti,composite-mux-clock"; + clock-output-names = "gpt8_mux_fck"; + clocks = <&omap_32k_fck>, <&sys_ck>; + ti,bit-shift = <6>; + }; + + gpt9_mux_fck: clock-gpt9-mux-fck { + #clock-cells = <0>; + compatible = "ti,composite-mux-clock"; + clock-output-names = "gpt9_mux_fck"; + clocks = <&omap_32k_fck>, <&sys_ck>; + ti,bit-shift = <7>; + }; }; gpt2_fck: gpt2_fck { @@ -1119,154 +1478,42 @@ clocks = <&gpt2_gate_fck>, <&gpt2_mux_fck>; }; - gpt3_gate_fck: gpt3_gate_fck@1000 { - #clock-cells = <0>; - compatible = "ti,composite-gate-clock"; - clocks = <&sys_ck>; - ti,bit-shift = <4>; - reg = <0x1000>; - }; - - gpt3_mux_fck: gpt3_mux_fck@1040 { - #clock-cells = <0>; - compatible = "ti,composite-mux-clock"; - clocks = <&omap_32k_fck>, <&sys_ck>; - ti,bit-shift = <1>; - reg = <0x1040>; - }; - gpt3_fck: gpt3_fck { #clock-cells = <0>; compatible = "ti,composite-clock"; clocks = <&gpt3_gate_fck>, <&gpt3_mux_fck>; }; - gpt4_gate_fck: gpt4_gate_fck@1000 { - #clock-cells = <0>; - compatible = "ti,composite-gate-clock"; - clocks = <&sys_ck>; - ti,bit-shift = <5>; - reg = <0x1000>; - }; - - gpt4_mux_fck: gpt4_mux_fck@1040 { - #clock-cells = <0>; - compatible = "ti,composite-mux-clock"; - clocks = <&omap_32k_fck>, <&sys_ck>; - ti,bit-shift = <2>; - reg = <0x1040>; - }; - gpt4_fck: gpt4_fck { #clock-cells = <0>; compatible = "ti,composite-clock"; clocks = <&gpt4_gate_fck>, <&gpt4_mux_fck>; }; - gpt5_gate_fck: gpt5_gate_fck@1000 { - #clock-cells = <0>; - compatible = "ti,composite-gate-clock"; - clocks = <&sys_ck>; - ti,bit-shift = <6>; - reg = <0x1000>; - }; - - gpt5_mux_fck: gpt5_mux_fck@1040 { - #clock-cells = <0>; - compatible = "ti,composite-mux-clock"; - clocks = <&omap_32k_fck>, <&sys_ck>; - ti,bit-shift = <3>; - reg = <0x1040>; - }; - gpt5_fck: gpt5_fck { #clock-cells = <0>; compatible = "ti,composite-clock"; clocks = <&gpt5_gate_fck>, <&gpt5_mux_fck>; }; - gpt6_gate_fck: gpt6_gate_fck@1000 { - #clock-cells = <0>; - compatible = "ti,composite-gate-clock"; - clocks = <&sys_ck>; - ti,bit-shift = <7>; - reg = <0x1000>; - }; - - gpt6_mux_fck: gpt6_mux_fck@1040 { - #clock-cells = <0>; - compatible = "ti,composite-mux-clock"; - clocks = <&omap_32k_fck>, <&sys_ck>; - ti,bit-shift = <4>; - reg = <0x1040>; - }; - gpt6_fck: gpt6_fck { #clock-cells = <0>; compatible = "ti,composite-clock"; clocks = <&gpt6_gate_fck>, <&gpt6_mux_fck>; }; - gpt7_gate_fck: gpt7_gate_fck@1000 { - #clock-cells = <0>; - compatible = "ti,composite-gate-clock"; - clocks = <&sys_ck>; - ti,bit-shift = <8>; - reg = <0x1000>; - }; - - gpt7_mux_fck: gpt7_mux_fck@1040 { - #clock-cells = <0>; - compatible = "ti,composite-mux-clock"; - clocks = <&omap_32k_fck>, <&sys_ck>; - ti,bit-shift = <5>; - reg = <0x1040>; - }; - gpt7_fck: gpt7_fck { #clock-cells = <0>; compatible = "ti,composite-clock"; clocks = <&gpt7_gate_fck>, <&gpt7_mux_fck>; }; - gpt8_gate_fck: gpt8_gate_fck@1000 { - #clock-cells = <0>; - compatible = "ti,composite-gate-clock"; - clocks = <&sys_ck>; - ti,bit-shift = <9>; - reg = <0x1000>; - }; - - gpt8_mux_fck: gpt8_mux_fck@1040 { - #clock-cells = <0>; - compatible = "ti,composite-mux-clock"; - clocks = <&omap_32k_fck>, <&sys_ck>; - ti,bit-shift = <6>; - reg = <0x1040>; - }; - gpt8_fck: gpt8_fck { #clock-cells = <0>; compatible = "ti,composite-clock"; clocks = <&gpt8_gate_fck>, <&gpt8_mux_fck>; }; - gpt9_gate_fck: gpt9_gate_fck@1000 { - #clock-cells = <0>; - compatible = "ti,composite-gate-clock"; - clocks = <&sys_ck>; - ti,bit-shift = <10>; - reg = <0x1000>; - }; - - gpt9_mux_fck: gpt9_mux_fck@1040 { - #clock-cells = <0>; - compatible = "ti,composite-mux-clock"; - clocks = <&omap_32k_fck>, <&sys_ck>; - ti,bit-shift = <7>; - reg = <0x1040>; - }; - gpt9_fck: gpt9_fck { #clock-cells = <0>; compatible = "ti,composite-clock"; @@ -1281,54 +1528,6 @@ clock-div = <1>; }; - gpio6_dbck: gpio6_dbck@1000 { - #clock-cells = <0>; - compatible = "ti,gate-clock"; - clocks = <&per_32k_alwon_fck>; - reg = <0x1000>; - ti,bit-shift = <17>; - }; - - gpio5_dbck: gpio5_dbck@1000 { - #clock-cells = <0>; - compatible = "ti,gate-clock"; - clocks = <&per_32k_alwon_fck>; - reg = <0x1000>; - ti,bit-shift = <16>; - }; - - gpio4_dbck: gpio4_dbck@1000 { - #clock-cells = <0>; - compatible = "ti,gate-clock"; - clocks = <&per_32k_alwon_fck>; - reg = <0x1000>; - ti,bit-shift = <15>; - }; - - gpio3_dbck: gpio3_dbck@1000 { - #clock-cells = <0>; - compatible = "ti,gate-clock"; - clocks = <&per_32k_alwon_fck>; - reg = <0x1000>; - ti,bit-shift = <14>; - }; - - gpio2_dbck: gpio2_dbck@1000 { - #clock-cells = <0>; - compatible = "ti,gate-clock"; - clocks = <&per_32k_alwon_fck>; - reg = <0x1000>; - ti,bit-shift = <13>; - }; - - wdt3_fck: wdt3_fck@1000 { - #clock-cells = <0>; - compatible = "ti,wait-gate-clock"; - clocks = <&per_32k_alwon_fck>; - reg = <0x1000>; - ti,bit-shift = <12>; - }; - per_l4_ick: per_l4_ick { #clock-cells = <0>; compatible = "fixed-factor-clock"; @@ -1337,187 +1536,164 @@ clock-div = <1>; }; - gpio6_ick: gpio6_ick@1010 { - #clock-cells = <0>; - compatible = "ti,omap3-interface-clock"; - clocks = <&per_l4_ick>; - reg = <0x1010>; - ti,bit-shift = <17>; - }; - - gpio5_ick: gpio5_ick@1010 { - #clock-cells = <0>; - compatible = "ti,omap3-interface-clock"; - clocks = <&per_l4_ick>; - reg = <0x1010>; - ti,bit-shift = <16>; - }; - - gpio4_ick: gpio4_ick@1010 { - #clock-cells = <0>; - compatible = "ti,omap3-interface-clock"; - clocks = <&per_l4_ick>; - reg = <0x1010>; - ti,bit-shift = <15>; - }; - - gpio3_ick: gpio3_ick@1010 { - #clock-cells = <0>; - compatible = "ti,omap3-interface-clock"; - clocks = <&per_l4_ick>; - reg = <0x1010>; - ti,bit-shift = <14>; - }; - - gpio2_ick: gpio2_ick@1010 { - #clock-cells = <0>; - compatible = "ti,omap3-interface-clock"; - clocks = <&per_l4_ick>; - reg = <0x1010>; - ti,bit-shift = <13>; - }; - - wdt3_ick: wdt3_ick@1010 { - #clock-cells = <0>; - compatible = "ti,omap3-interface-clock"; - clocks = <&per_l4_ick>; - reg = <0x1010>; - ti,bit-shift = <12>; - }; - - uart3_ick: uart3_ick@1010 { - #clock-cells = <0>; - compatible = "ti,omap3-interface-clock"; - clocks = <&per_l4_ick>; - reg = <0x1010>; - ti,bit-shift = <11>; - }; - - uart4_ick: uart4_ick@1010 { - #clock-cells = <0>; - compatible = "ti,omap3-interface-clock"; - clocks = <&per_l4_ick>; - reg = <0x1010>; - ti,bit-shift = <18>; - }; - - gpt9_ick: gpt9_ick@1010 { - #clock-cells = <0>; - compatible = "ti,omap3-interface-clock"; - clocks = <&per_l4_ick>; - reg = <0x1010>; - ti,bit-shift = <10>; - }; - - gpt8_ick: gpt8_ick@1010 { - #clock-cells = <0>; - compatible = "ti,omap3-interface-clock"; - clocks = <&per_l4_ick>; - reg = <0x1010>; - ti,bit-shift = <9>; - }; - - gpt7_ick: gpt7_ick@1010 { - #clock-cells = <0>; - compatible = "ti,omap3-interface-clock"; - clocks = <&per_l4_ick>; - reg = <0x1010>; - ti,bit-shift = <8>; - }; - - gpt6_ick: gpt6_ick@1010 { - #clock-cells = <0>; - compatible = "ti,omap3-interface-clock"; - clocks = <&per_l4_ick>; - reg = <0x1010>; - ti,bit-shift = <7>; - }; - - gpt5_ick: gpt5_ick@1010 { - #clock-cells = <0>; - compatible = "ti,omap3-interface-clock"; - clocks = <&per_l4_ick>; - reg = <0x1010>; - ti,bit-shift = <6>; - }; - - gpt4_ick: gpt4_ick@1010 { - #clock-cells = <0>; - compatible = "ti,omap3-interface-clock"; - clocks = <&per_l4_ick>; - reg = <0x1010>; - ti,bit-shift = <5>; - }; - - gpt3_ick: gpt3_ick@1010 { - #clock-cells = <0>; - compatible = "ti,omap3-interface-clock"; - clocks = <&per_l4_ick>; - reg = <0x1010>; - ti,bit-shift = <4>; - }; - - gpt2_ick: gpt2_ick@1010 { - #clock-cells = <0>; - compatible = "ti,omap3-interface-clock"; - clocks = <&per_l4_ick>; - reg = <0x1010>; - ti,bit-shift = <3>; - }; - - mcbsp2_ick: mcbsp2_ick@1010 { - #clock-cells = <0>; - compatible = "ti,omap3-interface-clock"; - clocks = <&per_l4_ick>; - reg = <0x1010>; - ti,bit-shift = <0>; - }; - - mcbsp3_ick: mcbsp3_ick@1010 { - #clock-cells = <0>; - compatible = "ti,omap3-interface-clock"; - clocks = <&per_l4_ick>; - reg = <0x1010>; - ti,bit-shift = <1>; - }; - - mcbsp4_ick: mcbsp4_ick@1010 { - #clock-cells = <0>; - compatible = "ti,omap3-interface-clock"; - clocks = <&per_l4_ick>; + /* CM_ICLKEN_PER */ + clock@1010 { + compatible = "ti,clksel"; reg = <0x1010>; - ti,bit-shift = <2>; - }; - - mcbsp2_gate_fck: mcbsp2_gate_fck@1000 { - #clock-cells = <0>; - compatible = "ti,composite-gate-clock"; - clocks = <&mcbsp_clks>; - ti,bit-shift = <0>; - reg = <0x1000>; - }; - - mcbsp3_gate_fck: mcbsp3_gate_fck@1000 { - #clock-cells = <0>; - compatible = "ti,composite-gate-clock"; - clocks = <&mcbsp_clks>; - ti,bit-shift = <1>; - reg = <0x1000>; - }; - - mcbsp4_gate_fck: mcbsp4_gate_fck@1000 { - #clock-cells = <0>; - compatible = "ti,composite-gate-clock"; - clocks = <&mcbsp_clks>; - ti,bit-shift = <2>; - reg = <0x1000>; - }; - - emu_src_mux_ck: emu_src_mux_ck@1140 { - #clock-cells = <0>; - compatible = "ti,mux-clock"; - clocks = <&sys_ck>, <&emu_core_alwon_ck>, <&emu_per_alwon_ck>, <&emu_mpu_alwon_ck>; - reg = <0x1140>; + #clock-cells = <2>; + #address-cells = <0>; + + gpio6_ick: clock-gpio6-ick { + #clock-cells = <0>; + compatible = "ti,omap3-interface-clock"; + clock-output-names = "gpio6_ick"; + clocks = <&per_l4_ick>; + ti,bit-shift = <17>; + }; + + gpio5_ick: clock-gpio5-ick { + #clock-cells = <0>; + compatible = "ti,omap3-interface-clock"; + clock-output-names = "gpio5_ick"; + clocks = <&per_l4_ick>; + ti,bit-shift = <16>; + }; + + gpio4_ick: clock-gpio4-ick { + #clock-cells = <0>; + compatible = "ti,omap3-interface-clock"; + clock-output-names = "gpio4_ick"; + clocks = <&per_l4_ick>; + ti,bit-shift = <15>; + }; + + gpio3_ick: clock-gpio3-ick { + #clock-cells = <0>; + compatible = "ti,omap3-interface-clock"; + clock-output-names = "gpio3_ick"; + clocks = <&per_l4_ick>; + ti,bit-shift = <14>; + }; + + gpio2_ick: clock-gpio2-ick { + #clock-cells = <0>; + compatible = "ti,omap3-interface-clock"; + clock-output-names = "gpio2_ick"; + clocks = <&per_l4_ick>; + ti,bit-shift = <13>; + }; + + wdt3_ick: clock-wdt3-ick { + #clock-cells = <0>; + compatible = "ti,omap3-interface-clock"; + clock-output-names = "wdt3_ick"; + clocks = <&per_l4_ick>; + ti,bit-shift = <12>; + }; + + uart3_ick: clock-uart3-ick { + #clock-cells = <0>; + compatible = "ti,omap3-interface-clock"; + clock-output-names = "uart3_ick"; + clocks = <&per_l4_ick>; + ti,bit-shift = <11>; + }; + + uart4_ick: clock-uart4-ick { + #clock-cells = <0>; + compatible = "ti,omap3-interface-clock"; + clock-output-names = "uart4_ick"; + clocks = <&per_l4_ick>; + ti,bit-shift = <18>; + }; + + gpt9_ick: clock-gpt9-ick { + #clock-cells = <0>; + compatible = "ti,omap3-interface-clock"; + clock-output-names = "gpt9_ick"; + clocks = <&per_l4_ick>; + ti,bit-shift = <10>; + }; + + gpt8_ick: clock-gpt8-ick { + #clock-cells = <0>; + compatible = "ti,omap3-interface-clock"; + clock-output-names = "gpt8_ick"; + clocks = <&per_l4_ick>; + ti,bit-shift = <9>; + }; + + gpt7_ick: clock-gpt7-ick { + #clock-cells = <0>; + compatible = "ti,omap3-interface-clock"; + clock-output-names = "gpt7_ick"; + clocks = <&per_l4_ick>; + ti,bit-shift = <8>; + }; + + gpt6_ick: clock-gpt6-ick { + #clock-cells = <0>; + compatible = "ti,omap3-interface-clock"; + clock-output-names = "gpt6_ick"; + clocks = <&per_l4_ick>; + ti,bit-shift = <7>; + }; + + gpt5_ick: clock-gpt5-ick { + #clock-cells = <0>; + compatible = "ti,omap3-interface-clock"; + clock-output-names = "gpt5_ick"; + clocks = <&per_l4_ick>; + ti,bit-shift = <6>; + }; + + gpt4_ick: clock-gpt4-ick { + #clock-cells = <0>; + compatible = "ti,omap3-interface-clock"; + clock-output-names = "gpt4_ick"; + clocks = <&per_l4_ick>; + ti,bit-shift = <5>; + }; + + gpt3_ick: clock-gpt3-ick { + #clock-cells = <0>; + compatible = "ti,omap3-interface-clock"; + clock-output-names = "gpt3_ick"; + clocks = <&per_l4_ick>; + ti,bit-shift = <4>; + }; + + gpt2_ick: clock-gpt2-ick { + #clock-cells = <0>; + compatible = "ti,omap3-interface-clock"; + clock-output-names = "gpt2_ick"; + clocks = <&per_l4_ick>; + ti,bit-shift = <3>; + }; + + mcbsp2_ick: clock-mcbsp2-ick { + #clock-cells = <0>; + compatible = "ti,omap3-interface-clock"; + clock-output-names = "mcbsp2_ick"; + clocks = <&per_l4_ick>; + ti,bit-shift = <0>; + }; + + mcbsp3_ick: clock-mcbsp3-ick { + #clock-cells = <0>; + compatible = "ti,omap3-interface-clock"; + clock-output-names = "mcbsp3_ick"; + clocks = <&per_l4_ick>; + ti,bit-shift = <1>; + }; + + mcbsp4_ick: clock-mcbsp4-ick { + #clock-cells = <0>; + compatible = "ti,omap3-interface-clock"; + clock-output-names = "mcbsp4_ick"; + clocks = <&per_l4_ick>; + ti,bit-shift = <2>; + }; }; emu_src_ck: emu_src_ck { @@ -1526,54 +1702,6 @@ clocks = <&emu_src_mux_ck>; }; - pclk_fck: pclk_fck@1140 { - #clock-cells = <0>; - compatible = "ti,divider-clock"; - clocks = <&emu_src_ck>; - ti,bit-shift = <8>; - ti,max-div = <7>; - reg = <0x1140>; - ti,index-starts-at-one; - }; - - pclkx2_fck: pclkx2_fck@1140 { - #clock-cells = <0>; - compatible = "ti,divider-clock"; - clocks = <&emu_src_ck>; - ti,bit-shift = <6>; - ti,max-div = <3>; - reg = <0x1140>; - ti,index-starts-at-one; - }; - - atclk_fck: atclk_fck@1140 { - #clock-cells = <0>; - compatible = "ti,divider-clock"; - clocks = <&emu_src_ck>; - ti,bit-shift = <4>; - ti,max-div = <3>; - reg = <0x1140>; - ti,index-starts-at-one; - }; - - traceclk_src_fck: traceclk_src_fck@1140 { - #clock-cells = <0>; - compatible = "ti,mux-clock"; - clocks = <&sys_ck>, <&emu_core_alwon_ck>, <&emu_per_alwon_ck>, <&emu_mpu_alwon_ck>; - ti,bit-shift = <2>; - reg = <0x1140>; - }; - - traceclk_fck: traceclk_fck@1140 { - #clock-cells = <0>; - compatible = "ti,divider-clock"; - clocks = <&traceclk_src_fck>; - ti,bit-shift = <11>; - ti,max-div = <7>; - reg = <0x1140>; - ti,index-starts-at-one; - }; - secure_32k_fck: secure_32k_fck { #clock-cells = <0>; compatible = "fixed-clock"; diff --git a/arch/arm/boot/dts/omap4-panda-common.dtsi b/arch/arm/boot/dts/omap4-panda-common.dtsi index 609a8dea946b..518652a599bd 100644 --- a/arch/arm/boot/dts/omap4-panda-common.dtsi +++ b/arch/arm/boot/dts/omap4-panda-common.dtsi @@ -558,7 +558,7 @@ #address-cells = <1>; #size-cells = <0>; - ethernet: usbether@1 { + ethernet: ethernet@1 { compatible = "usb424,ec00"; reg = <1>; }; diff --git a/arch/arm/boot/dts/omap443x-clocks.dtsi b/arch/arm/boot/dts/omap443x-clocks.dtsi index 39297868ec85..581e088231b5 100644 --- a/arch/arm/boot/dts/omap443x-clocks.dtsi +++ b/arch/arm/boot/dts/omap443x-clocks.dtsi @@ -8,6 +8,7 @@ bandgap_fclk: bandgap_fclk@1888 { #clock-cells = <0>; compatible = "ti,gate-clock"; + clock-output-names = "bandgap_fclk"; clocks = <&sys_32k_ck>; ti,bit-shift = <8>; reg = <0x1888>; diff --git a/arch/arm/boot/dts/omap446x-clocks.dtsi b/arch/arm/boot/dts/omap446x-clocks.dtsi index 0f41714cffbb..d9362fef6720 100644 --- a/arch/arm/boot/dts/omap446x-clocks.dtsi +++ b/arch/arm/boot/dts/omap446x-clocks.dtsi @@ -8,6 +8,7 @@ div_ts_ck: div_ts_ck@1888 { #clock-cells = <0>; compatible = "ti,divider-clock"; + clock-output-names = "div_ts_ck"; clocks = <&l4_wkup_clk_mux_ck>; ti,bit-shift = <24>; reg = <0x1888>; @@ -17,6 +18,7 @@ bandgap_ts_fclk: bandgap_ts_fclk@1888 { #clock-cells = <0>; compatible = "ti,gate-clock"; + clock-output-names = "bandgap_ts_fclk"; clocks = <&div_ts_ck>; ti,bit-shift = <8>; reg = <0x1888>; diff --git a/arch/arm/boot/dts/omap44xx-clocks.dtsi b/arch/arm/boot/dts/omap44xx-clocks.dtsi index 1f1c04d8f472..8df73d285638 100644 --- a/arch/arm/boot/dts/omap44xx-clocks.dtsi +++ b/arch/arm/boot/dts/omap44xx-clocks.dtsi @@ -8,18 +8,21 @@ extalt_clkin_ck: extalt_clkin_ck { #clock-cells = <0>; compatible = "fixed-clock"; + clock-output-names = "extalt_clkin_ck"; clock-frequency = <59000000>; }; pad_clks_src_ck: pad_clks_src_ck { #clock-cells = <0>; compatible = "fixed-clock"; + clock-output-names = "pad_clks_src_ck"; clock-frequency = <12000000>; }; pad_clks_ck: pad_clks_ck@108 { #clock-cells = <0>; compatible = "ti,gate-clock"; + clock-output-names = "pad_clks_ck"; clocks = <&pad_clks_src_ck>; ti,bit-shift = <8>; reg = <0x0108>; @@ -28,24 +31,28 @@ pad_slimbus_core_clks_ck: pad_slimbus_core_clks_ck { #clock-cells = <0>; compatible = "fixed-clock"; + clock-output-names = "pad_slimbus_core_clks_ck"; clock-frequency = <12000000>; }; secure_32k_clk_src_ck: secure_32k_clk_src_ck { #clock-cells = <0>; compatible = "fixed-clock"; + clock-output-names = "secure_32k_clk_src_ck"; clock-frequency = <32768>; }; slimbus_src_clk: slimbus_src_clk { #clock-cells = <0>; compatible = "fixed-clock"; + clock-output-names = "slimbus_src_clk"; clock-frequency = <12000000>; }; slimbus_clk: slimbus_clk@108 { #clock-cells = <0>; compatible = "ti,gate-clock"; + clock-output-names = "slimbus_clk"; clocks = <&slimbus_src_clk>; ti,bit-shift = <10>; reg = <0x0108>; @@ -54,84 +61,98 @@ sys_32k_ck: sys_32k_ck { #clock-cells = <0>; compatible = "fixed-clock"; + clock-output-names = "sys_32k_ck"; clock-frequency = <32768>; }; virt_12000000_ck: virt_12000000_ck { #clock-cells = <0>; compatible = "fixed-clock"; + clock-output-names = "virt_12000000_ck"; clock-frequency = <12000000>; }; virt_13000000_ck: virt_13000000_ck { #clock-cells = <0>; compatible = "fixed-clock"; + clock-output-names = "virt_13000000_ck"; clock-frequency = <13000000>; }; virt_16800000_ck: virt_16800000_ck { #clock-cells = <0>; compatible = "fixed-clock"; + clock-output-names = "virt_16800000_ck"; clock-frequency = <16800000>; }; virt_19200000_ck: virt_19200000_ck { #clock-cells = <0>; compatible = "fixed-clock"; + clock-output-names = "virt_19200000_ck"; clock-frequency = <19200000>; }; virt_26000000_ck: virt_26000000_ck { #clock-cells = <0>; compatible = "fixed-clock"; + clock-output-names = "virt_26000000_ck"; clock-frequency = <26000000>; }; virt_27000000_ck: virt_27000000_ck { #clock-cells = <0>; compatible = "fixed-clock"; + clock-output-names = "virt_27000000_ck"; clock-frequency = <27000000>; }; virt_38400000_ck: virt_38400000_ck { #clock-cells = <0>; compatible = "fixed-clock"; + clock-output-names = "virt_38400000_ck"; clock-frequency = <38400000>; }; tie_low_clock_ck: tie_low_clock_ck { #clock-cells = <0>; compatible = "fixed-clock"; + clock-output-names = "tie_low_clock_ck"; clock-frequency = <0>; }; utmi_phy_clkout_ck: utmi_phy_clkout_ck { #clock-cells = <0>; compatible = "fixed-clock"; + clock-output-names = "utmi_phy_clkout_ck"; clock-frequency = <60000000>; }; xclk60mhsp1_ck: xclk60mhsp1_ck { #clock-cells = <0>; compatible = "fixed-clock"; + clock-output-names = "xclk60mhsp1_ck"; clock-frequency = <60000000>; }; xclk60mhsp2_ck: xclk60mhsp2_ck { #clock-cells = <0>; compatible = "fixed-clock"; + clock-output-names = "xclk60mhsp2_ck"; clock-frequency = <60000000>; }; xclk60motg_ck: xclk60motg_ck { #clock-cells = <0>; compatible = "fixed-clock"; + clock-output-names = "xclk60motg_ck"; clock-frequency = <60000000>; }; dpll_abe_ck: dpll_abe_ck@1e0 { #clock-cells = <0>; compatible = "ti,omap4-dpll-m4xen-clock"; + clock-output-names = "dpll_abe_ck"; clocks = <&abe_dpll_refclk_mux_ck>, <&abe_dpll_bypass_clk_mux_ck>; reg = <0x01e0>, <0x01e4>, <0x01ec>, <0x01e8>; }; @@ -139,6 +160,7 @@ dpll_abe_x2_ck: dpll_abe_x2_ck@1f0 { #clock-cells = <0>; compatible = "ti,omap4-dpll-x2-clock"; + clock-output-names = "dpll_abe_x2_ck"; clocks = <&dpll_abe_ck>; reg = <0x01f0>; }; @@ -146,6 +168,7 @@ dpll_abe_m2x2_ck: dpll_abe_m2x2_ck@1f0 { #clock-cells = <0>; compatible = "ti,divider-clock"; + clock-output-names = "dpll_abe_m2x2_ck"; clocks = <&dpll_abe_x2_ck>; ti,max-div = <31>; ti,autoidle-shift = <8>; @@ -157,6 +180,7 @@ abe_24m_fclk: abe_24m_fclk { #clock-cells = <0>; compatible = "fixed-factor-clock"; + clock-output-names = "abe_24m_fclk"; clocks = <&dpll_abe_m2x2_ck>; clock-mult = <1>; clock-div = <8>; @@ -165,6 +189,7 @@ abe_clk: abe_clk@108 { #clock-cells = <0>; compatible = "ti,divider-clock"; + clock-output-names = "abe_clk"; clocks = <&dpll_abe_m2x2_ck>; ti,max-div = <4>; reg = <0x0108>; @@ -175,6 +200,7 @@ dpll_abe_m3x2_ck: dpll_abe_m3x2_ck@1f4 { #clock-cells = <0>; compatible = "ti,divider-clock"; + clock-output-names = "dpll_abe_m3x2_ck"; clocks = <&dpll_abe_x2_ck>; ti,max-div = <31>; ti,autoidle-shift = <8>; @@ -186,6 +212,7 @@ core_hsd_byp_clk_mux_ck: core_hsd_byp_clk_mux_ck@12c { #clock-cells = <0>; compatible = "ti,mux-clock"; + clock-output-names = "core_hsd_byp_clk_mux_ck"; clocks = <&sys_clkin_ck>, <&dpll_abe_m3x2_ck>; ti,bit-shift = <23>; reg = <0x012c>; @@ -194,6 +221,7 @@ dpll_core_ck: dpll_core_ck@120 { #clock-cells = <0>; compatible = "ti,omap4-dpll-core-clock"; + clock-output-names = "dpll_core_ck"; clocks = <&sys_clkin_ck>, <&core_hsd_byp_clk_mux_ck>; reg = <0x0120>, <0x0124>, <0x012c>, <0x0128>; }; @@ -201,12 +229,14 @@ dpll_core_x2_ck: dpll_core_x2_ck { #clock-cells = <0>; compatible = "ti,omap4-dpll-x2-clock"; + clock-output-names = "dpll_core_x2_ck"; clocks = <&dpll_core_ck>; }; dpll_core_m6x2_ck: dpll_core_m6x2_ck@140 { #clock-cells = <0>; compatible = "ti,divider-clock"; + clock-output-names = "dpll_core_m6x2_ck"; clocks = <&dpll_core_x2_ck>; ti,max-div = <31>; ti,autoidle-shift = <8>; @@ -218,6 +248,7 @@ dpll_core_m2_ck: dpll_core_m2_ck@130 { #clock-cells = <0>; compatible = "ti,divider-clock"; + clock-output-names = "dpll_core_m2_ck"; clocks = <&dpll_core_ck>; ti,max-div = <31>; ti,autoidle-shift = <8>; @@ -229,6 +260,7 @@ ddrphy_ck: ddrphy_ck { #clock-cells = <0>; compatible = "fixed-factor-clock"; + clock-output-names = "ddrphy_ck"; clocks = <&dpll_core_m2_ck>; clock-mult = <1>; clock-div = <2>; @@ -237,6 +269,7 @@ dpll_core_m5x2_ck: dpll_core_m5x2_ck@13c { #clock-cells = <0>; compatible = "ti,divider-clock"; + clock-output-names = "dpll_core_m5x2_ck"; clocks = <&dpll_core_x2_ck>; ti,max-div = <31>; ti,autoidle-shift = <8>; @@ -248,6 +281,7 @@ div_core_ck: div_core_ck@100 { #clock-cells = <0>; compatible = "ti,divider-clock"; + clock-output-names = "div_core_ck"; clocks = <&dpll_core_m5x2_ck>; reg = <0x0100>; ti,max-div = <2>; @@ -256,6 +290,7 @@ div_iva_hs_clk: div_iva_hs_clk@1dc { #clock-cells = <0>; compatible = "ti,divider-clock"; + clock-output-names = "div_iva_hs_clk"; clocks = <&dpll_core_m5x2_ck>; ti,max-div = <4>; reg = <0x01dc>; @@ -265,6 +300,7 @@ div_mpu_hs_clk: div_mpu_hs_clk@19c { #clock-cells = <0>; compatible = "ti,divider-clock"; + clock-output-names = "div_mpu_hs_clk"; clocks = <&dpll_core_m5x2_ck>; ti,max-div = <4>; reg = <0x019c>; @@ -274,6 +310,7 @@ dpll_core_m4x2_ck: dpll_core_m4x2_ck@138 { #clock-cells = <0>; compatible = "ti,divider-clock"; + clock-output-names = "dpll_core_m4x2_ck"; clocks = <&dpll_core_x2_ck>; ti,max-div = <31>; ti,autoidle-shift = <8>; @@ -285,6 +322,7 @@ dll_clk_div_ck: dll_clk_div_ck { #clock-cells = <0>; compatible = "fixed-factor-clock"; + clock-output-names = "dll_clk_div_ck"; clocks = <&dpll_core_m4x2_ck>; clock-mult = <1>; clock-div = <2>; @@ -293,6 +331,7 @@ dpll_abe_m2_ck: dpll_abe_m2_ck@1f0 { #clock-cells = <0>; compatible = "ti,divider-clock"; + clock-output-names = "dpll_abe_m2_ck"; clocks = <&dpll_abe_ck>; ti,max-div = <31>; reg = <0x01f0>; @@ -302,6 +341,7 @@ dpll_core_m3x2_gate_ck: dpll_core_m3x2_gate_ck@134 { #clock-cells = <0>; compatible = "ti,composite-no-wait-gate-clock"; + clock-output-names = "dpll_core_m3x2_gate_ck"; clocks = <&dpll_core_x2_ck>; ti,bit-shift = <8>; reg = <0x0134>; @@ -310,6 +350,7 @@ dpll_core_m3x2_div_ck: dpll_core_m3x2_div_ck@134 { #clock-cells = <0>; compatible = "ti,composite-divider-clock"; + clock-output-names = "dpll_core_m3x2_div_ck"; clocks = <&dpll_core_x2_ck>; ti,max-div = <31>; reg = <0x0134>; @@ -319,12 +360,14 @@ dpll_core_m3x2_ck: dpll_core_m3x2_ck { #clock-cells = <0>; compatible = "ti,composite-clock"; + clock-output-names = "dpll_core_m3x2_ck"; clocks = <&dpll_core_m3x2_gate_ck>, <&dpll_core_m3x2_div_ck>; }; dpll_core_m7x2_ck: dpll_core_m7x2_ck@144 { #clock-cells = <0>; compatible = "ti,divider-clock"; + clock-output-names = "dpll_core_m7x2_ck"; clocks = <&dpll_core_x2_ck>; ti,max-div = <31>; ti,autoidle-shift = <8>; @@ -336,6 +379,7 @@ iva_hsd_byp_clk_mux_ck: iva_hsd_byp_clk_mux_ck@1ac { #clock-cells = <0>; compatible = "ti,mux-clock"; + clock-output-names = "iva_hsd_byp_clk_mux_ck"; clocks = <&sys_clkin_ck>, <&div_iva_hs_clk>; ti,bit-shift = <23>; reg = <0x01ac>; @@ -344,6 +388,7 @@ dpll_iva_ck: dpll_iva_ck@1a0 { #clock-cells = <0>; compatible = "ti,omap4-dpll-clock"; + clock-output-names = "dpll_iva_ck"; clocks = <&sys_clkin_ck>, <&iva_hsd_byp_clk_mux_ck>; reg = <0x01a0>, <0x01a4>, <0x01ac>, <0x01a8>; assigned-clocks = <&dpll_iva_ck>; @@ -353,12 +398,14 @@ dpll_iva_x2_ck: dpll_iva_x2_ck { #clock-cells = <0>; compatible = "ti,omap4-dpll-x2-clock"; + clock-output-names = "dpll_iva_x2_ck"; clocks = <&dpll_iva_ck>; }; dpll_iva_m4x2_ck: dpll_iva_m4x2_ck@1b8 { #clock-cells = <0>; compatible = "ti,divider-clock"; + clock-output-names = "dpll_iva_m4x2_ck"; clocks = <&dpll_iva_x2_ck>; ti,max-div = <31>; ti,autoidle-shift = <8>; @@ -372,6 +419,7 @@ dpll_iva_m5x2_ck: dpll_iva_m5x2_ck@1bc { #clock-cells = <0>; compatible = "ti,divider-clock"; + clock-output-names = "dpll_iva_m5x2_ck"; clocks = <&dpll_iva_x2_ck>; ti,max-div = <31>; ti,autoidle-shift = <8>; @@ -385,6 +433,7 @@ dpll_mpu_ck: dpll_mpu_ck@160 { #clock-cells = <0>; compatible = "ti,omap4-dpll-clock"; + clock-output-names = "dpll_mpu_ck"; clocks = <&sys_clkin_ck>, <&div_mpu_hs_clk>; reg = <0x0160>, <0x0164>, <0x016c>, <0x0168>; }; @@ -392,6 +441,7 @@ dpll_mpu_m2_ck: dpll_mpu_m2_ck@170 { #clock-cells = <0>; compatible = "ti,divider-clock"; + clock-output-names = "dpll_mpu_m2_ck"; clocks = <&dpll_mpu_ck>; ti,max-div = <31>; ti,autoidle-shift = <8>; @@ -403,6 +453,7 @@ per_hs_clk_div_ck: per_hs_clk_div_ck { #clock-cells = <0>; compatible = "fixed-factor-clock"; + clock-output-names = "per_hs_clk_div_ck"; clocks = <&dpll_abe_m3x2_ck>; clock-mult = <1>; clock-div = <2>; @@ -411,6 +462,7 @@ usb_hs_clk_div_ck: usb_hs_clk_div_ck { #clock-cells = <0>; compatible = "fixed-factor-clock"; + clock-output-names = "usb_hs_clk_div_ck"; clocks = <&dpll_abe_m3x2_ck>; clock-mult = <1>; clock-div = <3>; @@ -419,6 +471,7 @@ l3_div_ck: l3_div_ck@100 { #clock-cells = <0>; compatible = "ti,divider-clock"; + clock-output-names = "l3_div_ck"; clocks = <&div_core_ck>; ti,bit-shift = <4>; ti,max-div = <2>; @@ -428,6 +481,7 @@ l4_div_ck: l4_div_ck@100 { #clock-cells = <0>; compatible = "ti,divider-clock"; + clock-output-names = "l4_div_ck"; clocks = <&l3_div_ck>; ti,bit-shift = <8>; ti,max-div = <2>; @@ -437,6 +491,7 @@ lp_clk_div_ck: lp_clk_div_ck { #clock-cells = <0>; compatible = "fixed-factor-clock"; + clock-output-names = "lp_clk_div_ck"; clocks = <&dpll_abe_m2x2_ck>; clock-mult = <1>; clock-div = <16>; @@ -445,6 +500,7 @@ mpu_periphclk: mpu_periphclk { #clock-cells = <0>; compatible = "fixed-factor-clock"; + clock-output-names = "mpu_periphclk"; clocks = <&dpll_mpu_ck>; clock-mult = <1>; clock-div = <2>; @@ -453,6 +509,7 @@ ocp_abe_iclk: ocp_abe_iclk@528 { #clock-cells = <0>; compatible = "ti,divider-clock"; + clock-output-names = "ocp_abe_iclk"; clocks = <&abe_clkctrl OMAP4_AESS_CLKCTRL 24>; ti,bit-shift = <24>; reg = <0x0528>; @@ -462,6 +519,7 @@ per_abe_24m_fclk: per_abe_24m_fclk { #clock-cells = <0>; compatible = "fixed-factor-clock"; + clock-output-names = "per_abe_24m_fclk"; clocks = <&dpll_abe_m2_ck>; clock-mult = <1>; clock-div = <4>; @@ -470,6 +528,7 @@ dummy_ck: dummy_ck { #clock-cells = <0>; compatible = "fixed-clock"; + clock-output-names = "dummy_ck"; clock-frequency = <0>; }; }; @@ -478,6 +537,7 @@ sys_clkin_ck: sys_clkin_ck@110 { #clock-cells = <0>; compatible = "ti,mux-clock"; + clock-output-names = "sys_clkin_ck"; clocks = <&virt_12000000_ck>, <&virt_13000000_ck>, <&virt_16800000_ck>, <&virt_19200000_ck>, <&virt_26000000_ck>, <&virt_27000000_ck>, <&virt_38400000_ck>; reg = <0x0110>; ti,index-starts-at-one; @@ -486,6 +546,7 @@ abe_dpll_bypass_clk_mux_ck: abe_dpll_bypass_clk_mux_ck@108 { #clock-cells = <0>; compatible = "ti,mux-clock"; + clock-output-names = "abe_dpll_bypass_clk_mux_ck"; clocks = <&sys_clkin_ck>, <&sys_32k_ck>; ti,bit-shift = <24>; reg = <0x0108>; @@ -494,6 +555,7 @@ abe_dpll_refclk_mux_ck: abe_dpll_refclk_mux_ck@10c { #clock-cells = <0>; compatible = "ti,mux-clock"; + clock-output-names = "abe_dpll_refclk_mux_ck"; clocks = <&sys_clkin_ck>, <&sys_32k_ck>; reg = <0x010c>; }; @@ -501,6 +563,7 @@ dbgclk_mux_ck: dbgclk_mux_ck { #clock-cells = <0>; compatible = "fixed-factor-clock"; + clock-output-names = "dbgclk_mux_ck"; clocks = <&sys_clkin_ck>; clock-mult = <1>; clock-div = <1>; @@ -509,6 +572,7 @@ l4_wkup_clk_mux_ck: l4_wkup_clk_mux_ck@108 { #clock-cells = <0>; compatible = "ti,mux-clock"; + clock-output-names = "l4_wkup_clk_mux_ck"; clocks = <&sys_clkin_ck>, <&lp_clk_div_ck>; reg = <0x0108>; }; @@ -516,6 +580,7 @@ syc_clk_div_ck: syc_clk_div_ck@100 { #clock-cells = <0>; compatible = "ti,divider-clock"; + clock-output-names = "syc_clk_div_ck"; clocks = <&sys_clkin_ck>; reg = <0x0100>; ti,max-div = <2>; @@ -524,6 +589,7 @@ usim_ck: usim_ck@1858 { #clock-cells = <0>; compatible = "ti,divider-clock"; + clock-output-names = "usim_ck"; clocks = <&dpll_per_m4x2_ck>; ti,bit-shift = <24>; reg = <0x1858>; @@ -533,6 +599,7 @@ usim_fclk: usim_fclk@1858 { #clock-cells = <0>; compatible = "ti,gate-clock"; + clock-output-names = "usim_fclk"; clocks = <&usim_ck>; ti,bit-shift = <8>; reg = <0x1858>; @@ -541,6 +608,7 @@ trace_clk_div_ck: trace_clk_div_ck { #clock-cells = <0>; compatible = "ti,clkdm-gate-clock"; + clock-output-names = "trace_clk_div_ck"; clocks = <&emu_sys_clkctrl OMAP4_DEBUGSS_CLKCTRL 24>; }; }; @@ -548,6 +616,7 @@ &prm_clockdomains { emu_sys_clkdm: emu_sys_clkdm { compatible = "ti,clockdomain"; + clock-output-names = "emu_sys_clkdm"; clocks = <&trace_clk_div_ck>; }; }; @@ -556,6 +625,7 @@ per_hsd_byp_clk_mux_ck: per_hsd_byp_clk_mux_ck@14c { #clock-cells = <0>; compatible = "ti,mux-clock"; + clock-output-names = "per_hsd_byp_clk_mux_ck"; clocks = <&sys_clkin_ck>, <&per_hs_clk_div_ck>; ti,bit-shift = <23>; reg = <0x014c>; @@ -564,6 +634,7 @@ dpll_per_ck: dpll_per_ck@140 { #clock-cells = <0>; compatible = "ti,omap4-dpll-clock"; + clock-output-names = "dpll_per_ck"; clocks = <&sys_clkin_ck>, <&per_hsd_byp_clk_mux_ck>; reg = <0x0140>, <0x0144>, <0x014c>, <0x0148>; }; @@ -571,6 +642,7 @@ dpll_per_m2_ck: dpll_per_m2_ck@150 { #clock-cells = <0>; compatible = "ti,divider-clock"; + clock-output-names = "dpll_per_m2_ck"; clocks = <&dpll_per_ck>; ti,max-div = <31>; reg = <0x0150>; @@ -580,6 +652,7 @@ dpll_per_x2_ck: dpll_per_x2_ck@150 { #clock-cells = <0>; compatible = "ti,omap4-dpll-x2-clock"; + clock-output-names = "dpll_per_x2_ck"; clocks = <&dpll_per_ck>; reg = <0x0150>; }; @@ -587,6 +660,7 @@ dpll_per_m2x2_ck: dpll_per_m2x2_ck@150 { #clock-cells = <0>; compatible = "ti,divider-clock"; + clock-output-names = "dpll_per_m2x2_ck"; clocks = <&dpll_per_x2_ck>; ti,max-div = <31>; ti,autoidle-shift = <8>; @@ -598,6 +672,7 @@ dpll_per_m3x2_gate_ck: dpll_per_m3x2_gate_ck@154 { #clock-cells = <0>; compatible = "ti,composite-no-wait-gate-clock"; + clock-output-names = "dpll_per_m3x2_gate_ck"; clocks = <&dpll_per_x2_ck>; ti,bit-shift = <8>; reg = <0x0154>; @@ -606,6 +681,7 @@ dpll_per_m3x2_div_ck: dpll_per_m3x2_div_ck@154 { #clock-cells = <0>; compatible = "ti,composite-divider-clock"; + clock-output-names = "dpll_per_m3x2_div_ck"; clocks = <&dpll_per_x2_ck>; ti,max-div = <31>; reg = <0x0154>; @@ -615,12 +691,14 @@ dpll_per_m3x2_ck: dpll_per_m3x2_ck { #clock-cells = <0>; compatible = "ti,composite-clock"; + clock-output-names = "dpll_per_m3x2_ck"; clocks = <&dpll_per_m3x2_gate_ck>, <&dpll_per_m3x2_div_ck>; }; dpll_per_m4x2_ck: dpll_per_m4x2_ck@158 { #clock-cells = <0>; compatible = "ti,divider-clock"; + clock-output-names = "dpll_per_m4x2_ck"; clocks = <&dpll_per_x2_ck>; ti,max-div = <31>; ti,autoidle-shift = <8>; @@ -632,6 +710,7 @@ dpll_per_m5x2_ck: dpll_per_m5x2_ck@15c { #clock-cells = <0>; compatible = "ti,divider-clock"; + clock-output-names = "dpll_per_m5x2_ck"; clocks = <&dpll_per_x2_ck>; ti,max-div = <31>; ti,autoidle-shift = <8>; @@ -643,6 +722,7 @@ dpll_per_m6x2_ck: dpll_per_m6x2_ck@160 { #clock-cells = <0>; compatible = "ti,divider-clock"; + clock-output-names = "dpll_per_m6x2_ck"; clocks = <&dpll_per_x2_ck>; ti,max-div = <31>; ti,autoidle-shift = <8>; @@ -654,6 +734,7 @@ dpll_per_m7x2_ck: dpll_per_m7x2_ck@164 { #clock-cells = <0>; compatible = "ti,divider-clock"; + clock-output-names = "dpll_per_m7x2_ck"; clocks = <&dpll_per_x2_ck>; ti,max-div = <31>; ti,autoidle-shift = <8>; @@ -665,6 +746,7 @@ dpll_usb_ck: dpll_usb_ck@180 { #clock-cells = <0>; compatible = "ti,omap4-dpll-j-type-clock"; + clock-output-names = "dpll_usb_ck"; clocks = <&sys_clkin_ck>, <&usb_hs_clk_div_ck>; reg = <0x0180>, <0x0184>, <0x018c>, <0x0188>; }; @@ -672,6 +754,7 @@ dpll_usb_clkdcoldo_ck: dpll_usb_clkdcoldo_ck@1b4 { #clock-cells = <0>; compatible = "ti,fixed-factor-clock"; + clock-output-names = "dpll_usb_clkdcoldo_ck"; clocks = <&dpll_usb_ck>; ti,clock-div = <1>; ti,autoidle-shift = <8>; @@ -683,6 +766,7 @@ dpll_usb_m2_ck: dpll_usb_m2_ck@190 { #clock-cells = <0>; compatible = "ti,divider-clock"; + clock-output-names = "dpll_usb_m2_ck"; clocks = <&dpll_usb_ck>; ti,max-div = <127>; ti,autoidle-shift = <8>; @@ -694,6 +778,7 @@ ducati_clk_mux_ck: ducati_clk_mux_ck@100 { #clock-cells = <0>; compatible = "ti,mux-clock"; + clock-output-names = "ducati_clk_mux_ck"; clocks = <&div_core_ck>, <&dpll_per_m6x2_ck>; reg = <0x0100>; }; @@ -701,6 +786,7 @@ func_12m_fclk: func_12m_fclk { #clock-cells = <0>; compatible = "fixed-factor-clock"; + clock-output-names = "func_12m_fclk"; clocks = <&dpll_per_m2x2_ck>; clock-mult = <1>; clock-div = <16>; @@ -709,6 +795,7 @@ func_24m_clk: func_24m_clk { #clock-cells = <0>; compatible = "fixed-factor-clock"; + clock-output-names = "func_24m_clk"; clocks = <&dpll_per_m2_ck>; clock-mult = <1>; clock-div = <4>; @@ -717,6 +804,7 @@ func_24mc_fclk: func_24mc_fclk { #clock-cells = <0>; compatible = "fixed-factor-clock"; + clock-output-names = "func_24mc_fclk"; clocks = <&dpll_per_m2x2_ck>; clock-mult = <1>; clock-div = <8>; @@ -725,6 +813,7 @@ func_48m_fclk: func_48m_fclk@108 { #clock-cells = <0>; compatible = "ti,divider-clock"; + clock-output-names = "func_48m_fclk"; clocks = <&dpll_per_m2x2_ck>; reg = <0x0108>; ti,dividers = <4>, <8>; @@ -733,6 +822,7 @@ func_48mc_fclk: func_48mc_fclk { #clock-cells = <0>; compatible = "fixed-factor-clock"; + clock-output-names = "func_48mc_fclk"; clocks = <&dpll_per_m2x2_ck>; clock-mult = <1>; clock-div = <4>; @@ -741,6 +831,7 @@ func_64m_fclk: func_64m_fclk@108 { #clock-cells = <0>; compatible = "ti,divider-clock"; + clock-output-names = "func_64m_fclk"; clocks = <&dpll_per_m4x2_ck>; reg = <0x0108>; ti,dividers = <2>, <4>; @@ -749,6 +840,7 @@ func_96m_fclk: func_96m_fclk@108 { #clock-cells = <0>; compatible = "ti,divider-clock"; + clock-output-names = "func_96m_fclk"; clocks = <&dpll_per_m2x2_ck>; reg = <0x0108>; ti,dividers = <2>, <4>; @@ -757,6 +849,7 @@ init_60m_fclk: init_60m_fclk@104 { #clock-cells = <0>; compatible = "ti,divider-clock"; + clock-output-names = "init_60m_fclk"; clocks = <&dpll_usb_m2_ck>; reg = <0x0104>; ti,dividers = <1>, <8>; @@ -765,6 +858,7 @@ per_abe_nc_fclk: per_abe_nc_fclk@108 { #clock-cells = <0>; compatible = "ti,divider-clock"; + clock-output-names = "per_abe_nc_fclk"; clocks = <&dpll_abe_m2_ck>; reg = <0x0108>; ti,max-div = <2>; @@ -773,6 +867,7 @@ usb_phy_cm_clk32k: usb_phy_cm_clk32k@640 { #clock-cells = <0>; compatible = "ti,gate-clock"; + clock-output-names = "usb_phy_cm_clk32k"; clocks = <&sys_32k_ck>; ti,bit-shift = <8>; reg = <0x0640>; @@ -782,6 +877,7 @@ &cm2_clockdomains { l3_init_clkdm: l3_init_clkdm { compatible = "ti,clockdomain"; + clock-output-names = "l3_init_clkdm"; clocks = <&dpll_usb_ck>; }; }; @@ -790,6 +886,7 @@ auxclk0_src_gate_ck: auxclk0_src_gate_ck@310 { #clock-cells = <0>; compatible = "ti,composite-no-wait-gate-clock"; + clock-output-names = "auxclk0_src_gate_ck"; clocks = <&dpll_core_m3x2_ck>; ti,bit-shift = <8>; reg = <0x0310>; @@ -798,6 +895,7 @@ auxclk0_src_mux_ck: auxclk0_src_mux_ck@310 { #clock-cells = <0>; compatible = "ti,composite-mux-clock"; + clock-output-names = "auxclk0_src_mux_ck"; clocks = <&sys_clkin_ck>, <&dpll_core_m3x2_ck>, <&dpll_per_m3x2_ck>; ti,bit-shift = <1>; reg = <0x0310>; @@ -806,12 +904,14 @@ auxclk0_src_ck: auxclk0_src_ck { #clock-cells = <0>; compatible = "ti,composite-clock"; + clock-output-names = "auxclk0_src_ck"; clocks = <&auxclk0_src_gate_ck>, <&auxclk0_src_mux_ck>; }; auxclk0_ck: auxclk0_ck@310 { #clock-cells = <0>; compatible = "ti,divider-clock"; + clock-output-names = "auxclk0_ck"; clocks = <&auxclk0_src_ck>; ti,bit-shift = <16>; ti,max-div = <16>; @@ -821,6 +921,7 @@ auxclk1_src_gate_ck: auxclk1_src_gate_ck@314 { #clock-cells = <0>; compatible = "ti,composite-no-wait-gate-clock"; + clock-output-names = "auxclk1_src_gate_ck"; clocks = <&dpll_core_m3x2_ck>; ti,bit-shift = <8>; reg = <0x0314>; @@ -829,6 +930,7 @@ auxclk1_src_mux_ck: auxclk1_src_mux_ck@314 { #clock-cells = <0>; compatible = "ti,composite-mux-clock"; + clock-output-names = "auxclk1_src_mux_ck"; clocks = <&sys_clkin_ck>, <&dpll_core_m3x2_ck>, <&dpll_per_m3x2_ck>; ti,bit-shift = <1>; reg = <0x0314>; @@ -837,12 +939,14 @@ auxclk1_src_ck: auxclk1_src_ck { #clock-cells = <0>; compatible = "ti,composite-clock"; + clock-output-names = "auxclk1_src_ck"; clocks = <&auxclk1_src_gate_ck>, <&auxclk1_src_mux_ck>; }; auxclk1_ck: auxclk1_ck@314 { #clock-cells = <0>; compatible = "ti,divider-clock"; + clock-output-names = "auxclk1_ck"; clocks = <&auxclk1_src_ck>; ti,bit-shift = <16>; ti,max-div = <16>; @@ -852,6 +956,7 @@ auxclk2_src_gate_ck: auxclk2_src_gate_ck@318 { #clock-cells = <0>; compatible = "ti,composite-no-wait-gate-clock"; + clock-output-names = "auxclk2_src_gate_ck"; clocks = <&dpll_core_m3x2_ck>; ti,bit-shift = <8>; reg = <0x0318>; @@ -860,6 +965,7 @@ auxclk2_src_mux_ck: auxclk2_src_mux_ck@318 { #clock-cells = <0>; compatible = "ti,composite-mux-clock"; + clock-output-names = "auxclk2_src_mux_ck"; clocks = <&sys_clkin_ck>, <&dpll_core_m3x2_ck>, <&dpll_per_m3x2_ck>; ti,bit-shift = <1>; reg = <0x0318>; @@ -868,12 +974,14 @@ auxclk2_src_ck: auxclk2_src_ck { #clock-cells = <0>; compatible = "ti,composite-clock"; + clock-output-names = "auxclk2_src_ck"; clocks = <&auxclk2_src_gate_ck>, <&auxclk2_src_mux_ck>; }; auxclk2_ck: auxclk2_ck@318 { #clock-cells = <0>; compatible = "ti,divider-clock"; + clock-output-names = "auxclk2_ck"; clocks = <&auxclk2_src_ck>; ti,bit-shift = <16>; ti,max-div = <16>; @@ -883,6 +991,7 @@ auxclk3_src_gate_ck: auxclk3_src_gate_ck@31c { #clock-cells = <0>; compatible = "ti,composite-no-wait-gate-clock"; + clock-output-names = "auxclk3_src_gate_ck"; clocks = <&dpll_core_m3x2_ck>; ti,bit-shift = <8>; reg = <0x031c>; @@ -891,6 +1000,7 @@ auxclk3_src_mux_ck: auxclk3_src_mux_ck@31c { #clock-cells = <0>; compatible = "ti,composite-mux-clock"; + clock-output-names = "auxclk3_src_mux_ck"; clocks = <&sys_clkin_ck>, <&dpll_core_m3x2_ck>, <&dpll_per_m3x2_ck>; ti,bit-shift = <1>; reg = <0x031c>; @@ -899,12 +1009,14 @@ auxclk3_src_ck: auxclk3_src_ck { #clock-cells = <0>; compatible = "ti,composite-clock"; + clock-output-names = "auxclk3_src_ck"; clocks = <&auxclk3_src_gate_ck>, <&auxclk3_src_mux_ck>; }; auxclk3_ck: auxclk3_ck@31c { #clock-cells = <0>; compatible = "ti,divider-clock"; + clock-output-names = "auxclk3_ck"; clocks = <&auxclk3_src_ck>; ti,bit-shift = <16>; ti,max-div = <16>; @@ -914,6 +1026,7 @@ auxclk4_src_gate_ck: auxclk4_src_gate_ck@320 { #clock-cells = <0>; compatible = "ti,composite-no-wait-gate-clock"; + clock-output-names = "auxclk4_src_gate_ck"; clocks = <&dpll_core_m3x2_ck>; ti,bit-shift = <8>; reg = <0x0320>; @@ -922,6 +1035,7 @@ auxclk4_src_mux_ck: auxclk4_src_mux_ck@320 { #clock-cells = <0>; compatible = "ti,composite-mux-clock"; + clock-output-names = "auxclk4_src_mux_ck"; clocks = <&sys_clkin_ck>, <&dpll_core_m3x2_ck>, <&dpll_per_m3x2_ck>; ti,bit-shift = <1>; reg = <0x0320>; @@ -930,12 +1044,14 @@ auxclk4_src_ck: auxclk4_src_ck { #clock-cells = <0>; compatible = "ti,composite-clock"; + clock-output-names = "auxclk4_src_ck"; clocks = <&auxclk4_src_gate_ck>, <&auxclk4_src_mux_ck>; }; auxclk4_ck: auxclk4_ck@320 { #clock-cells = <0>; compatible = "ti,divider-clock"; + clock-output-names = "auxclk4_ck"; clocks = <&auxclk4_src_ck>; ti,bit-shift = <16>; ti,max-div = <16>; @@ -945,6 +1061,7 @@ auxclk5_src_gate_ck: auxclk5_src_gate_ck@324 { #clock-cells = <0>; compatible = "ti,composite-no-wait-gate-clock"; + clock-output-names = "auxclk5_src_gate_ck"; clocks = <&dpll_core_m3x2_ck>; ti,bit-shift = <8>; reg = <0x0324>; @@ -953,6 +1070,7 @@ auxclk5_src_mux_ck: auxclk5_src_mux_ck@324 { #clock-cells = <0>; compatible = "ti,composite-mux-clock"; + clock-output-names = "auxclk5_src_mux_ck"; clocks = <&sys_clkin_ck>, <&dpll_core_m3x2_ck>, <&dpll_per_m3x2_ck>; ti,bit-shift = <1>; reg = <0x0324>; @@ -961,12 +1079,14 @@ auxclk5_src_ck: auxclk5_src_ck { #clock-cells = <0>; compatible = "ti,composite-clock"; + clock-output-names = "auxclk5_src_ck"; clocks = <&auxclk5_src_gate_ck>, <&auxclk5_src_mux_ck>; }; auxclk5_ck: auxclk5_ck@324 { #clock-cells = <0>; compatible = "ti,divider-clock"; + clock-output-names = "auxclk5_ck"; clocks = <&auxclk5_src_ck>; ti,bit-shift = <16>; ti,max-div = <16>; @@ -976,6 +1096,7 @@ auxclkreq0_ck: auxclkreq0_ck@210 { #clock-cells = <0>; compatible = "ti,mux-clock"; + clock-output-names = "auxclkreq0_ck"; clocks = <&auxclk0_ck>, <&auxclk1_ck>, <&auxclk2_ck>, <&auxclk3_ck>, <&auxclk4_ck>, <&auxclk5_ck>; ti,bit-shift = <2>; reg = <0x0210>; @@ -984,6 +1105,7 @@ auxclkreq1_ck: auxclkreq1_ck@214 { #clock-cells = <0>; compatible = "ti,mux-clock"; + clock-output-names = "auxclkreq1_ck"; clocks = <&auxclk0_ck>, <&auxclk1_ck>, <&auxclk2_ck>, <&auxclk3_ck>, <&auxclk4_ck>, <&auxclk5_ck>; ti,bit-shift = <2>; reg = <0x0214>; @@ -992,6 +1114,7 @@ auxclkreq2_ck: auxclkreq2_ck@218 { #clock-cells = <0>; compatible = "ti,mux-clock"; + clock-output-names = "auxclkreq2_ck"; clocks = <&auxclk0_ck>, <&auxclk1_ck>, <&auxclk2_ck>, <&auxclk3_ck>, <&auxclk4_ck>, <&auxclk5_ck>; ti,bit-shift = <2>; reg = <0x0218>; @@ -1000,6 +1123,7 @@ auxclkreq3_ck: auxclkreq3_ck@21c { #clock-cells = <0>; compatible = "ti,mux-clock"; + clock-output-names = "auxclkreq3_ck"; clocks = <&auxclk0_ck>, <&auxclk1_ck>, <&auxclk2_ck>, <&auxclk3_ck>, <&auxclk4_ck>, <&auxclk5_ck>; ti,bit-shift = <2>; reg = <0x021c>; @@ -1008,6 +1132,7 @@ auxclkreq4_ck: auxclkreq4_ck@220 { #clock-cells = <0>; compatible = "ti,mux-clock"; + clock-output-names = "auxclkreq4_ck"; clocks = <&auxclk0_ck>, <&auxclk1_ck>, <&auxclk2_ck>, <&auxclk3_ck>, <&auxclk4_ck>, <&auxclk5_ck>; ti,bit-shift = <2>; reg = <0x0220>; @@ -1016,6 +1141,7 @@ auxclkreq5_ck: auxclkreq5_ck@224 { #clock-cells = <0>; compatible = "ti,mux-clock"; + clock-output-names = "auxclkreq5_ck"; clocks = <&auxclk0_ck>, <&auxclk1_ck>, <&auxclk2_ck>, <&auxclk3_ck>, <&auxclk4_ck>, <&auxclk5_ck>; ti,bit-shift = <2>; reg = <0x0224>; @@ -1025,6 +1151,7 @@ &cm1 { mpuss_cm: mpuss_cm@300 { compatible = "ti,omap4-cm"; + clock-output-names = "mpuss_cm"; reg = <0x300 0x100>; #address-cells = <1>; #size-cells = <1>; @@ -1032,6 +1159,7 @@ mpuss_clkctrl: clk@20 { compatible = "ti,clkctrl"; + clock-output-names = "mpuss_clkctrl"; reg = <0x20 0x4>; #clock-cells = <2>; }; @@ -1039,6 +1167,7 @@ tesla_cm: tesla_cm@400 { compatible = "ti,omap4-cm"; + clock-output-names = "tesla_cm"; reg = <0x400 0x100>; #address-cells = <1>; #size-cells = <1>; @@ -1046,6 +1175,7 @@ tesla_clkctrl: clk@20 { compatible = "ti,clkctrl"; + clock-output-names = "tesla_clkctrl"; reg = <0x20 0x4>; #clock-cells = <2>; }; @@ -1053,6 +1183,7 @@ abe_cm: abe_cm@500 { compatible = "ti,omap4-cm"; + clock-output-names = "abe_cm"; reg = <0x500 0x100>; #address-cells = <1>; #size-cells = <1>; @@ -1060,6 +1191,7 @@ abe_clkctrl: clk@20 { compatible = "ti,clkctrl"; + clock-output-names = "abe_clkctrl"; reg = <0x20 0x6c>; #clock-cells = <2>; }; @@ -1070,6 +1202,7 @@ &cm2 { l4_ao_cm: l4_ao_cm@600 { compatible = "ti,omap4-cm"; + clock-output-names = "l4_ao_cm"; reg = <0x600 0x100>; #address-cells = <1>; #size-cells = <1>; @@ -1077,6 +1210,7 @@ l4_ao_clkctrl: clk@20 { compatible = "ti,clkctrl"; + clock-output-names = "l4_ao_clkctrl"; reg = <0x20 0x1c>; #clock-cells = <2>; }; @@ -1084,6 +1218,7 @@ l3_1_cm: l3_1_cm@700 { compatible = "ti,omap4-cm"; + clock-output-names = "l3_1_cm"; reg = <0x700 0x100>; #address-cells = <1>; #size-cells = <1>; @@ -1091,6 +1226,7 @@ l3_1_clkctrl: clk@20 { compatible = "ti,clkctrl"; + clock-output-names = "l3_1_clkctrl"; reg = <0x20 0x4>; #clock-cells = <2>; }; @@ -1098,6 +1234,7 @@ l3_2_cm: l3_2_cm@800 { compatible = "ti,omap4-cm"; + clock-output-names = "l3_2_cm"; reg = <0x800 0x100>; #address-cells = <1>; #size-cells = <1>; @@ -1105,6 +1242,7 @@ l3_2_clkctrl: clk@20 { compatible = "ti,clkctrl"; + clock-output-names = "l3_2_clkctrl"; reg = <0x20 0x14>; #clock-cells = <2>; }; @@ -1112,6 +1250,7 @@ ducati_cm: ducati_cm@900 { compatible = "ti,omap4-cm"; + clock-output-names = "ducati_cm"; reg = <0x900 0x100>; #address-cells = <1>; #size-cells = <1>; @@ -1119,6 +1258,7 @@ ducati_clkctrl: clk@20 { compatible = "ti,clkctrl"; + clock-output-names = "ducati_clkctrl"; reg = <0x20 0x4>; #clock-cells = <2>; }; @@ -1126,6 +1266,7 @@ l3_dma_cm: l3_dma_cm@a00 { compatible = "ti,omap4-cm"; + clock-output-names = "l3_dma_cm"; reg = <0xa00 0x100>; #address-cells = <1>; #size-cells = <1>; @@ -1133,6 +1274,7 @@ l3_dma_clkctrl: clk@20 { compatible = "ti,clkctrl"; + clock-output-names = "l3_dma_clkctrl"; reg = <0x20 0x4>; #clock-cells = <2>; }; @@ -1140,6 +1282,7 @@ l3_emif_cm: l3_emif_cm@b00 { compatible = "ti,omap4-cm"; + clock-output-names = "l3_emif_cm"; reg = <0xb00 0x100>; #address-cells = <1>; #size-cells = <1>; @@ -1147,6 +1290,7 @@ l3_emif_clkctrl: clk@20 { compatible = "ti,clkctrl"; + clock-output-names = "l3_emif_clkctrl"; reg = <0x20 0x1c>; #clock-cells = <2>; }; @@ -1154,6 +1298,7 @@ d2d_cm: d2d_cm@c00 { compatible = "ti,omap4-cm"; + clock-output-names = "d2d_cm"; reg = <0xc00 0x100>; #address-cells = <1>; #size-cells = <1>; @@ -1161,6 +1306,7 @@ d2d_clkctrl: clk@20 { compatible = "ti,clkctrl"; + clock-output-names = "d2d_clkctrl"; reg = <0x20 0x4>; #clock-cells = <2>; }; @@ -1168,6 +1314,7 @@ l4_cfg_cm: l4_cfg_cm@d00 { compatible = "ti,omap4-cm"; + clock-output-names = "l4_cfg_cm"; reg = <0xd00 0x100>; #address-cells = <1>; #size-cells = <1>; @@ -1175,6 +1322,7 @@ l4_cfg_clkctrl: clk@20 { compatible = "ti,clkctrl"; + clock-output-names = "l4_cfg_clkctrl"; reg = <0x20 0x14>; #clock-cells = <2>; }; @@ -1182,6 +1330,7 @@ l3_instr_cm: l3_instr_cm@e00 { compatible = "ti,omap4-cm"; + clock-output-names = "l3_instr_cm"; reg = <0xe00 0x100>; #address-cells = <1>; #size-cells = <1>; @@ -1189,6 +1338,7 @@ l3_instr_clkctrl: clk@20 { compatible = "ti,clkctrl"; + clock-output-names = "l3_instr_clkctrl"; reg = <0x20 0x24>; #clock-cells = <2>; }; @@ -1196,6 +1346,7 @@ ivahd_cm: ivahd_cm@f00 { compatible = "ti,omap4-cm"; + clock-output-names = "ivahd_cm"; reg = <0xf00 0x100>; #address-cells = <1>; #size-cells = <1>; @@ -1203,6 +1354,7 @@ ivahd_clkctrl: clk@20 { compatible = "ti,clkctrl"; + clock-output-names = "ivahd_clkctrl"; reg = <0x20 0xc>; #clock-cells = <2>; }; @@ -1210,6 +1362,7 @@ iss_cm: iss_cm@1000 { compatible = "ti,omap4-cm"; + clock-output-names = "iss_cm"; reg = <0x1000 0x100>; #address-cells = <1>; #size-cells = <1>; @@ -1217,6 +1370,7 @@ iss_clkctrl: clk@20 { compatible = "ti,clkctrl"; + clock-output-names = "iss_clkctrl"; reg = <0x20 0xc>; #clock-cells = <2>; }; @@ -1224,6 +1378,7 @@ l3_dss_cm: l3_dss_cm@1100 { compatible = "ti,omap4-cm"; + clock-output-names = "l3_dss_cm"; reg = <0x1100 0x100>; #address-cells = <1>; #size-cells = <1>; @@ -1231,6 +1386,7 @@ l3_dss_clkctrl: clk@20 { compatible = "ti,clkctrl"; + clock-output-names = "l3_dss_clkctrl"; reg = <0x20 0x4>; #clock-cells = <2>; }; @@ -1238,6 +1394,7 @@ l3_gfx_cm: l3_gfx_cm@1200 { compatible = "ti,omap4-cm"; + clock-output-names = "l3_gfx_cm"; reg = <0x1200 0x100>; #address-cells = <1>; #size-cells = <1>; @@ -1245,6 +1402,7 @@ l3_gfx_clkctrl: clk@20 { compatible = "ti,clkctrl"; + clock-output-names = "l3_gfx_clkctrl"; reg = <0x20 0x4>; #clock-cells = <2>; }; @@ -1252,6 +1410,7 @@ l3_init_cm: l3_init_cm@1300 { compatible = "ti,omap4-cm"; + clock-output-names = "l3_init_cm"; reg = <0x1300 0x100>; #address-cells = <1>; #size-cells = <1>; @@ -1259,26 +1418,30 @@ l3_init_clkctrl: clk@20 { compatible = "ti,clkctrl"; + clock-output-names = "l3_init_clkctrl"; reg = <0x20 0xc4>; #clock-cells = <2>; }; }; - l4_per_cm: l4_per_cm@1400 { + l4_per_cm: clock@1400 { compatible = "ti,omap4-cm"; + clock-output-names = "l4_per_cm"; reg = <0x1400 0x200>; #address-cells = <1>; #size-cells = <1>; ranges = <0 0x1400 0x200>; l4_per_clkctrl: clock@20 { - compatible = "ti,clkctrl-l4-per", "ti,clkctrl"; + compatible = "ti,clkctrl"; + clock-output-names = "l4_per_clkctrl"; reg = <0x20 0x144>; #clock-cells = <2>; }; l4_secure_clkctrl: clock@1a0 { - compatible = "ti,clkctrl-l4-secure", "ti,clkctrl"; + compatible = "ti,clkctrl"; + clock-output-names = "l4_secure_clkctrl"; reg = <0x1a0 0x3c>; #clock-cells = <2>; }; @@ -1288,6 +1451,7 @@ &prm { l4_wkup_cm: l4_wkup_cm@1800 { compatible = "ti,omap4-cm"; + clock-output-names = "l4_wkup_cm"; reg = <0x1800 0x100>; #address-cells = <1>; #size-cells = <1>; @@ -1295,6 +1459,7 @@ l4_wkup_clkctrl: clk@20 { compatible = "ti,clkctrl"; + clock-output-names = "l4_wkup_clkctrl"; reg = <0x20 0x5c>; #clock-cells = <2>; }; @@ -1302,6 +1467,7 @@ emu_sys_cm: emu_sys_cm@1a00 { compatible = "ti,omap4-cm"; + clock-output-names = "emu_sys_cm"; reg = <0x1a00 0x100>; #address-cells = <1>; #size-cells = <1>; @@ -1309,6 +1475,7 @@ emu_sys_clkctrl: clk@20 { compatible = "ti,clkctrl"; + clock-output-names = "emu_sys_clkctrl"; reg = <0x20 0x4>; #clock-cells = <2>; }; diff --git a/arch/arm/boot/dts/omap5-igep0050.dts b/arch/arm/boot/dts/omap5-igep0050.dts index 76e499d89d24..3851120857d7 100644 --- a/arch/arm/boot/dts/omap5-igep0050.dts +++ b/arch/arm/boot/dts/omap5-igep0050.dts @@ -128,7 +128,7 @@ #address-cells = <1>; #size-cells = <0>; - ethernet: usbether@3 { + ethernet: ethernet@3 { compatible = "usb424,7500"; reg = <3>; }; diff --git a/arch/arm/boot/dts/omap5-uevm.dts b/arch/arm/boot/dts/omap5-uevm.dts index 51d5fcae5081..453da9f18a99 100644 --- a/arch/arm/boot/dts/omap5-uevm.dts +++ b/arch/arm/boot/dts/omap5-uevm.dts @@ -209,7 +209,7 @@ #size-cells = <0>; }; - ethernet: usbether@3 { + ethernet: ethernet@3 { compatible = "usb424,9730"; reg = <3>; }; diff --git a/arch/arm/boot/dts/omap54xx-clocks.dtsi b/arch/arm/boot/dts/omap54xx-clocks.dtsi index 42f2c447727d..5cf3b0e78c15 100644 --- a/arch/arm/boot/dts/omap54xx-clocks.dtsi +++ b/arch/arm/boot/dts/omap54xx-clocks.dtsi @@ -8,12 +8,14 @@ pad_clks_src_ck: pad_clks_src_ck { #clock-cells = <0>; compatible = "fixed-clock"; + clock-output-names = "pad_clks_src_ck"; clock-frequency = <12000000>; }; pad_clks_ck: pad_clks_ck@108 { #clock-cells = <0>; compatible = "ti,gate-clock"; + clock-output-names = "pad_clks_ck"; clocks = <&pad_clks_src_ck>; ti,bit-shift = <8>; reg = <0x0108>; @@ -22,18 +24,21 @@ secure_32k_clk_src_ck: secure_32k_clk_src_ck { #clock-cells = <0>; compatible = "fixed-clock"; + clock-output-names = "secure_32k_clk_src_ck"; clock-frequency = <32768>; }; slimbus_src_clk: slimbus_src_clk { #clock-cells = <0>; compatible = "fixed-clock"; + clock-output-names = "slimbus_src_clk"; clock-frequency = <12000000>; }; slimbus_clk: slimbus_clk@108 { #clock-cells = <0>; compatible = "ti,gate-clock"; + clock-output-names = "slimbus_clk"; clocks = <&slimbus_src_clk>; ti,bit-shift = <10>; reg = <0x0108>; @@ -42,66 +47,77 @@ sys_32k_ck: sys_32k_ck { #clock-cells = <0>; compatible = "fixed-clock"; + clock-output-names = "sys_32k_ck"; clock-frequency = <32768>; }; virt_12000000_ck: virt_12000000_ck { #clock-cells = <0>; compatible = "fixed-clock"; + clock-output-names = "virt_12000000_ck"; clock-frequency = <12000000>; }; virt_13000000_ck: virt_13000000_ck { #clock-cells = <0>; compatible = "fixed-clock"; + clock-output-names = "virt_13000000_ck"; clock-frequency = <13000000>; }; virt_16800000_ck: virt_16800000_ck { #clock-cells = <0>; compatible = "fixed-clock"; + clock-output-names = "virt_16800000_ck"; clock-frequency = <16800000>; }; virt_19200000_ck: virt_19200000_ck { #clock-cells = <0>; compatible = "fixed-clock"; + clock-output-names = "virt_19200000_ck"; clock-frequency = <19200000>; }; virt_26000000_ck: virt_26000000_ck { #clock-cells = <0>; compatible = "fixed-clock"; + clock-output-names = "virt_26000000_ck"; clock-frequency = <26000000>; }; virt_27000000_ck: virt_27000000_ck { #clock-cells = <0>; compatible = "fixed-clock"; + clock-output-names = "virt_27000000_ck"; clock-frequency = <27000000>; }; virt_38400000_ck: virt_38400000_ck { #clock-cells = <0>; compatible = "fixed-clock"; + clock-output-names = "virt_38400000_ck"; clock-frequency = <38400000>; }; xclk60mhsp1_ck: xclk60mhsp1_ck { #clock-cells = <0>; compatible = "fixed-clock"; + clock-output-names = "xclk60mhsp1_ck"; clock-frequency = <60000000>; }; xclk60mhsp2_ck: xclk60mhsp2_ck { #clock-cells = <0>; compatible = "fixed-clock"; + clock-output-names = "xclk60mhsp2_ck"; clock-frequency = <60000000>; }; dpll_abe_ck: dpll_abe_ck@1e0 { #clock-cells = <0>; compatible = "ti,omap4-dpll-m4xen-clock"; + clock-output-names = "dpll_abe_ck"; clocks = <&abe_dpll_clk_mux>, <&abe_dpll_bypass_clk_mux>; reg = <0x01e0>, <0x01e4>, <0x01ec>, <0x01e8>; }; @@ -109,12 +125,14 @@ dpll_abe_x2_ck: dpll_abe_x2_ck { #clock-cells = <0>; compatible = "ti,omap4-dpll-x2-clock"; + clock-output-names = "dpll_abe_x2_ck"; clocks = <&dpll_abe_ck>; }; dpll_abe_m2x2_ck: dpll_abe_m2x2_ck@1f0 { #clock-cells = <0>; compatible = "ti,divider-clock"; + clock-output-names = "dpll_abe_m2x2_ck"; clocks = <&dpll_abe_x2_ck>; ti,max-div = <31>; reg = <0x01f0>; @@ -124,6 +142,7 @@ abe_24m_fclk: abe_24m_fclk { #clock-cells = <0>; compatible = "fixed-factor-clock"; + clock-output-names = "abe_24m_fclk"; clocks = <&dpll_abe_m2x2_ck>; clock-mult = <1>; clock-div = <8>; @@ -132,6 +151,7 @@ abe_clk: abe_clk@108 { #clock-cells = <0>; compatible = "ti,divider-clock"; + clock-output-names = "abe_clk"; clocks = <&dpll_abe_m2x2_ck>; ti,max-div = <4>; reg = <0x0108>; @@ -141,6 +161,7 @@ abe_iclk: abe_iclk@528 { #clock-cells = <0>; compatible = "ti,divider-clock"; + clock-output-names = "abe_iclk"; clocks = <&aess_fclk>; ti,bit-shift = <24>; reg = <0x0528>; @@ -150,6 +171,7 @@ abe_lp_clk_div: abe_lp_clk_div { #clock-cells = <0>; compatible = "fixed-factor-clock"; + clock-output-names = "abe_lp_clk_div"; clocks = <&dpll_abe_m2x2_ck>; clock-mult = <1>; clock-div = <16>; @@ -158,6 +180,7 @@ dpll_abe_m3x2_ck: dpll_abe_m3x2_ck@1f4 { #clock-cells = <0>; compatible = "ti,divider-clock"; + clock-output-names = "dpll_abe_m3x2_ck"; clocks = <&dpll_abe_x2_ck>; ti,max-div = <31>; reg = <0x01f4>; @@ -167,6 +190,7 @@ dpll_core_byp_mux: dpll_core_byp_mux@12c { #clock-cells = <0>; compatible = "ti,mux-clock"; + clock-output-names = "dpll_core_byp_mux"; clocks = <&sys_clkin>, <&dpll_abe_m3x2_ck>; ti,bit-shift = <23>; reg = <0x012c>; @@ -175,6 +199,7 @@ dpll_core_ck: dpll_core_ck@120 { #clock-cells = <0>; compatible = "ti,omap4-dpll-core-clock"; + clock-output-names = "dpll_core_ck"; clocks = <&sys_clkin>, <&dpll_core_byp_mux>; reg = <0x0120>, <0x0124>, <0x012c>, <0x0128>; }; @@ -182,12 +207,14 @@ dpll_core_x2_ck: dpll_core_x2_ck { #clock-cells = <0>; compatible = "ti,omap4-dpll-x2-clock"; + clock-output-names = "dpll_core_x2_ck"; clocks = <&dpll_core_ck>; }; dpll_core_h21x2_ck: dpll_core_h21x2_ck@150 { #clock-cells = <0>; compatible = "ti,divider-clock"; + clock-output-names = "dpll_core_h21x2_ck"; clocks = <&dpll_core_x2_ck>; ti,max-div = <63>; reg = <0x0150>; @@ -197,6 +224,7 @@ c2c_fclk: c2c_fclk { #clock-cells = <0>; compatible = "fixed-factor-clock"; + clock-output-names = "c2c_fclk"; clocks = <&dpll_core_h21x2_ck>; clock-mult = <1>; clock-div = <1>; @@ -205,6 +233,7 @@ c2c_iclk: c2c_iclk { #clock-cells = <0>; compatible = "fixed-factor-clock"; + clock-output-names = "c2c_iclk"; clocks = <&c2c_fclk>; clock-mult = <1>; clock-div = <2>; @@ -213,6 +242,7 @@ dpll_core_h11x2_ck: dpll_core_h11x2_ck@138 { #clock-cells = <0>; compatible = "ti,divider-clock"; + clock-output-names = "dpll_core_h11x2_ck"; clocks = <&dpll_core_x2_ck>; ti,max-div = <63>; reg = <0x0138>; @@ -222,6 +252,7 @@ dpll_core_h12x2_ck: dpll_core_h12x2_ck@13c { #clock-cells = <0>; compatible = "ti,divider-clock"; + clock-output-names = "dpll_core_h12x2_ck"; clocks = <&dpll_core_x2_ck>; ti,max-div = <63>; reg = <0x013c>; @@ -231,6 +262,7 @@ dpll_core_h13x2_ck: dpll_core_h13x2_ck@140 { #clock-cells = <0>; compatible = "ti,divider-clock"; + clock-output-names = "dpll_core_h13x2_ck"; clocks = <&dpll_core_x2_ck>; ti,max-div = <63>; reg = <0x0140>; @@ -240,6 +272,7 @@ dpll_core_h14x2_ck: dpll_core_h14x2_ck@144 { #clock-cells = <0>; compatible = "ti,divider-clock"; + clock-output-names = "dpll_core_h14x2_ck"; clocks = <&dpll_core_x2_ck>; ti,max-div = <63>; reg = <0x0144>; @@ -249,6 +282,7 @@ dpll_core_h22x2_ck: dpll_core_h22x2_ck@154 { #clock-cells = <0>; compatible = "ti,divider-clock"; + clock-output-names = "dpll_core_h22x2_ck"; clocks = <&dpll_core_x2_ck>; ti,max-div = <63>; reg = <0x0154>; @@ -258,6 +292,7 @@ dpll_core_h23x2_ck: dpll_core_h23x2_ck@158 { #clock-cells = <0>; compatible = "ti,divider-clock"; + clock-output-names = "dpll_core_h23x2_ck"; clocks = <&dpll_core_x2_ck>; ti,max-div = <63>; reg = <0x0158>; @@ -267,6 +302,7 @@ dpll_core_h24x2_ck: dpll_core_h24x2_ck@15c { #clock-cells = <0>; compatible = "ti,divider-clock"; + clock-output-names = "dpll_core_h24x2_ck"; clocks = <&dpll_core_x2_ck>; ti,max-div = <63>; reg = <0x015c>; @@ -276,6 +312,7 @@ dpll_core_m2_ck: dpll_core_m2_ck@130 { #clock-cells = <0>; compatible = "ti,divider-clock"; + clock-output-names = "dpll_core_m2_ck"; clocks = <&dpll_core_ck>; ti,max-div = <31>; reg = <0x0130>; @@ -285,6 +322,7 @@ dpll_core_m3x2_ck: dpll_core_m3x2_ck@134 { #clock-cells = <0>; compatible = "ti,divider-clock"; + clock-output-names = "dpll_core_m3x2_ck"; clocks = <&dpll_core_x2_ck>; ti,max-div = <31>; reg = <0x0134>; @@ -294,6 +332,7 @@ iva_dpll_hs_clk_div: iva_dpll_hs_clk_div { #clock-cells = <0>; compatible = "fixed-factor-clock"; + clock-output-names = "iva_dpll_hs_clk_div"; clocks = <&dpll_core_h12x2_ck>; clock-mult = <1>; clock-div = <1>; @@ -302,6 +341,7 @@ dpll_iva_byp_mux: dpll_iva_byp_mux@1ac { #clock-cells = <0>; compatible = "ti,mux-clock"; + clock-output-names = "dpll_iva_byp_mux"; clocks = <&sys_clkin>, <&iva_dpll_hs_clk_div>; ti,bit-shift = <23>; reg = <0x01ac>; @@ -310,6 +350,7 @@ dpll_iva_ck: dpll_iva_ck@1a0 { #clock-cells = <0>; compatible = "ti,omap4-dpll-clock"; + clock-output-names = "dpll_iva_ck"; clocks = <&sys_clkin>, <&dpll_iva_byp_mux>; reg = <0x01a0>, <0x01a4>, <0x01ac>, <0x01a8>; assigned-clocks = <&dpll_iva_ck>; @@ -319,12 +360,14 @@ dpll_iva_x2_ck: dpll_iva_x2_ck { #clock-cells = <0>; compatible = "ti,omap4-dpll-x2-clock"; + clock-output-names = "dpll_iva_x2_ck"; clocks = <&dpll_iva_ck>; }; dpll_iva_h11x2_ck: dpll_iva_h11x2_ck@1b8 { #clock-cells = <0>; compatible = "ti,divider-clock"; + clock-output-names = "dpll_iva_h11x2_ck"; clocks = <&dpll_iva_x2_ck>; ti,max-div = <63>; reg = <0x01b8>; @@ -336,6 +379,7 @@ dpll_iva_h12x2_ck: dpll_iva_h12x2_ck@1bc { #clock-cells = <0>; compatible = "ti,divider-clock"; + clock-output-names = "dpll_iva_h12x2_ck"; clocks = <&dpll_iva_x2_ck>; ti,max-div = <63>; reg = <0x01bc>; @@ -347,6 +391,7 @@ mpu_dpll_hs_clk_div: mpu_dpll_hs_clk_div { #clock-cells = <0>; compatible = "fixed-factor-clock"; + clock-output-names = "mpu_dpll_hs_clk_div"; clocks = <&dpll_core_h12x2_ck>; clock-mult = <1>; clock-div = <1>; @@ -355,6 +400,7 @@ dpll_mpu_ck: dpll_mpu_ck@160 { #clock-cells = <0>; compatible = "ti,omap5-mpu-dpll-clock"; + clock-output-names = "dpll_mpu_ck"; clocks = <&sys_clkin>, <&mpu_dpll_hs_clk_div>; reg = <0x0160>, <0x0164>, <0x016c>, <0x0168>; }; @@ -362,6 +408,7 @@ dpll_mpu_m2_ck: dpll_mpu_m2_ck@170 { #clock-cells = <0>; compatible = "ti,divider-clock"; + clock-output-names = "dpll_mpu_m2_ck"; clocks = <&dpll_mpu_ck>; ti,max-div = <31>; reg = <0x0170>; @@ -371,6 +418,7 @@ per_dpll_hs_clk_div: per_dpll_hs_clk_div { #clock-cells = <0>; compatible = "fixed-factor-clock"; + clock-output-names = "per_dpll_hs_clk_div"; clocks = <&dpll_abe_m3x2_ck>; clock-mult = <1>; clock-div = <2>; @@ -379,6 +427,7 @@ usb_dpll_hs_clk_div: usb_dpll_hs_clk_div { #clock-cells = <0>; compatible = "fixed-factor-clock"; + clock-output-names = "usb_dpll_hs_clk_div"; clocks = <&dpll_abe_m3x2_ck>; clock-mult = <1>; clock-div = <3>; @@ -387,6 +436,7 @@ l3_iclk_div: l3_iclk_div@100 { #clock-cells = <0>; compatible = "ti,divider-clock"; + clock-output-names = "l3_iclk_div"; ti,max-div = <2>; ti,bit-shift = <4>; reg = <0x100>; @@ -397,6 +447,7 @@ gpu_l3_iclk: gpu_l3_iclk { #clock-cells = <0>; compatible = "fixed-factor-clock"; + clock-output-names = "gpu_l3_iclk"; clocks = <&l3_iclk_div>; clock-mult = <1>; clock-div = <1>; @@ -405,6 +456,7 @@ l4_root_clk_div: l4_root_clk_div@100 { #clock-cells = <0>; compatible = "ti,divider-clock"; + clock-output-names = "l4_root_clk_div"; ti,max-div = <2>; ti,bit-shift = <8>; reg = <0x100>; @@ -415,6 +467,7 @@ slimbus1_slimbus_clk: slimbus1_slimbus_clk@560 { #clock-cells = <0>; compatible = "ti,gate-clock"; + clock-output-names = "slimbus1_slimbus_clk"; clocks = <&slimbus_clk>; ti,bit-shift = <11>; reg = <0x0560>; @@ -423,6 +476,7 @@ aess_fclk: aess_fclk@528 { #clock-cells = <0>; compatible = "ti,divider-clock"; + clock-output-names = "aess_fclk"; clocks = <&abe_clk>; ti,bit-shift = <24>; ti,max-div = <2>; @@ -432,6 +486,7 @@ mcasp_sync_mux_ck: mcasp_sync_mux_ck@540 { #clock-cells = <0>; compatible = "ti,mux-clock"; + clock-output-names = "mcasp_sync_mux_ck"; clocks = <&abe_24m_fclk>, <&dss_syc_gfclk_div>, <&func_24m_clk>; ti,bit-shift = <26>; reg = <0x0540>; @@ -440,6 +495,7 @@ mcasp_gfclk: mcasp_gfclk@540 { #clock-cells = <0>; compatible = "ti,mux-clock"; + clock-output-names = "mcasp_gfclk"; clocks = <&mcasp_sync_mux_ck>, <&pad_clks_ck>, <&slimbus_clk>; ti,bit-shift = <24>; reg = <0x0540>; @@ -448,6 +504,7 @@ dummy_ck: dummy_ck { #clock-cells = <0>; compatible = "fixed-clock"; + clock-output-names = "dummy_ck"; clock-frequency = <0>; }; }; @@ -455,6 +512,7 @@ sys_clkin: sys_clkin@110 { #clock-cells = <0>; compatible = "ti,mux-clock"; + clock-output-names = "sys_clkin"; clocks = <&virt_12000000_ck>, <&virt_13000000_ck>, <&virt_16800000_ck>, <&virt_19200000_ck>, <&virt_26000000_ck>, <&virt_27000000_ck>, <&virt_38400000_ck>; reg = <0x0110>; ti,index-starts-at-one; @@ -463,6 +521,7 @@ abe_dpll_bypass_clk_mux: abe_dpll_bypass_clk_mux@108 { #clock-cells = <0>; compatible = "ti,mux-clock"; + clock-output-names = "abe_dpll_bypass_clk_mux"; clocks = <&sys_clkin>, <&sys_32k_ck>; reg = <0x0108>; }; @@ -470,6 +529,7 @@ abe_dpll_clk_mux: abe_dpll_clk_mux@10c { #clock-cells = <0>; compatible = "ti,mux-clock"; + clock-output-names = "abe_dpll_clk_mux"; clocks = <&sys_clkin>, <&sys_32k_ck>; reg = <0x010c>; }; @@ -477,6 +537,7 @@ custefuse_sys_gfclk_div: custefuse_sys_gfclk_div { #clock-cells = <0>; compatible = "fixed-factor-clock"; + clock-output-names = "custefuse_sys_gfclk_div"; clocks = <&sys_clkin>; clock-mult = <1>; clock-div = <2>; @@ -485,6 +546,7 @@ dss_syc_gfclk_div: dss_syc_gfclk_div { #clock-cells = <0>; compatible = "fixed-factor-clock"; + clock-output-names = "dss_syc_gfclk_div"; clocks = <&sys_clkin>; clock-mult = <1>; clock-div = <1>; @@ -493,6 +555,7 @@ wkupaon_iclk_mux: wkupaon_iclk_mux@108 { #clock-cells = <0>; compatible = "ti,mux-clock"; + clock-output-names = "wkupaon_iclk_mux"; clocks = <&sys_clkin>, <&abe_lp_clk_div>; reg = <0x0108>; }; @@ -500,6 +563,7 @@ l3instr_ts_gclk_div: l3instr_ts_gclk_div { #clock-cells = <0>; compatible = "fixed-factor-clock"; + clock-output-names = "l3instr_ts_gclk_div"; clocks = <&wkupaon_iclk_mux>; clock-mult = <1>; clock-div = <1>; @@ -511,6 +575,7 @@ dpll_per_byp_mux: dpll_per_byp_mux@14c { #clock-cells = <0>; compatible = "ti,mux-clock"; + clock-output-names = "dpll_per_byp_mux"; clocks = <&sys_clkin>, <&per_dpll_hs_clk_div>; ti,bit-shift = <23>; reg = <0x014c>; @@ -519,6 +584,7 @@ dpll_per_ck: dpll_per_ck@140 { #clock-cells = <0>; compatible = "ti,omap4-dpll-clock"; + clock-output-names = "dpll_per_ck"; clocks = <&sys_clkin>, <&dpll_per_byp_mux>; reg = <0x0140>, <0x0144>, <0x014c>, <0x0148>; }; @@ -526,12 +592,14 @@ dpll_per_x2_ck: dpll_per_x2_ck { #clock-cells = <0>; compatible = "ti,omap4-dpll-x2-clock"; + clock-output-names = "dpll_per_x2_ck"; clocks = <&dpll_per_ck>; }; dpll_per_h11x2_ck: dpll_per_h11x2_ck@158 { #clock-cells = <0>; compatible = "ti,divider-clock"; + clock-output-names = "dpll_per_h11x2_ck"; clocks = <&dpll_per_x2_ck>; ti,max-div = <63>; reg = <0x0158>; @@ -541,6 +609,7 @@ dpll_per_h12x2_ck: dpll_per_h12x2_ck@15c { #clock-cells = <0>; compatible = "ti,divider-clock"; + clock-output-names = "dpll_per_h12x2_ck"; clocks = <&dpll_per_x2_ck>; ti,max-div = <63>; reg = <0x015c>; @@ -550,6 +619,7 @@ dpll_per_h14x2_ck: dpll_per_h14x2_ck@164 { #clock-cells = <0>; compatible = "ti,divider-clock"; + clock-output-names = "dpll_per_h14x2_ck"; clocks = <&dpll_per_x2_ck>; ti,max-div = <63>; reg = <0x0164>; @@ -559,6 +629,7 @@ dpll_per_m2_ck: dpll_per_m2_ck@150 { #clock-cells = <0>; compatible = "ti,divider-clock"; + clock-output-names = "dpll_per_m2_ck"; clocks = <&dpll_per_ck>; ti,max-div = <31>; reg = <0x0150>; @@ -568,6 +639,7 @@ dpll_per_m2x2_ck: dpll_per_m2x2_ck@150 { #clock-cells = <0>; compatible = "ti,divider-clock"; + clock-output-names = "dpll_per_m2x2_ck"; clocks = <&dpll_per_x2_ck>; ti,max-div = <31>; reg = <0x0150>; @@ -577,6 +649,7 @@ dpll_per_m3x2_ck: dpll_per_m3x2_ck@154 { #clock-cells = <0>; compatible = "ti,divider-clock"; + clock-output-names = "dpll_per_m3x2_ck"; clocks = <&dpll_per_x2_ck>; ti,max-div = <31>; reg = <0x0154>; @@ -586,6 +659,7 @@ dpll_unipro1_ck: dpll_unipro1_ck@200 { #clock-cells = <0>; compatible = "ti,omap4-dpll-clock"; + clock-output-names = "dpll_unipro1_ck"; clocks = <&sys_clkin>, <&sys_clkin>; reg = <0x0200>, <0x0204>, <0x020c>, <0x0208>; }; @@ -593,6 +667,7 @@ dpll_unipro1_clkdcoldo: dpll_unipro1_clkdcoldo { #clock-cells = <0>; compatible = "fixed-factor-clock"; + clock-output-names = "dpll_unipro1_clkdcoldo"; clocks = <&dpll_unipro1_ck>; clock-mult = <1>; clock-div = <1>; @@ -601,6 +676,7 @@ dpll_unipro1_m2_ck: dpll_unipro1_m2_ck@210 { #clock-cells = <0>; compatible = "ti,divider-clock"; + clock-output-names = "dpll_unipro1_m2_ck"; clocks = <&dpll_unipro1_ck>; ti,max-div = <127>; reg = <0x0210>; @@ -610,6 +686,7 @@ dpll_unipro2_ck: dpll_unipro2_ck@1c0 { #clock-cells = <0>; compatible = "ti,omap4-dpll-clock"; + clock-output-names = "dpll_unipro2_ck"; clocks = <&sys_clkin>, <&sys_clkin>; reg = <0x01c0>, <0x01c4>, <0x01cc>, <0x01c8>; }; @@ -617,6 +694,7 @@ dpll_unipro2_clkdcoldo: dpll_unipro2_clkdcoldo { #clock-cells = <0>; compatible = "fixed-factor-clock"; + clock-output-names = "dpll_unipro2_clkdcoldo"; clocks = <&dpll_unipro2_ck>; clock-mult = <1>; clock-div = <1>; @@ -625,6 +703,7 @@ dpll_unipro2_m2_ck: dpll_unipro2_m2_ck@1d0 { #clock-cells = <0>; compatible = "ti,divider-clock"; + clock-output-names = "dpll_unipro2_m2_ck"; clocks = <&dpll_unipro2_ck>; ti,max-div = <127>; reg = <0x01d0>; @@ -634,6 +713,7 @@ dpll_usb_byp_mux: dpll_usb_byp_mux@18c { #clock-cells = <0>; compatible = "ti,mux-clock"; + clock-output-names = "dpll_usb_byp_mux"; clocks = <&sys_clkin>, <&usb_dpll_hs_clk_div>; ti,bit-shift = <23>; reg = <0x018c>; @@ -642,6 +722,7 @@ dpll_usb_ck: dpll_usb_ck@180 { #clock-cells = <0>; compatible = "ti,omap4-dpll-j-type-clock"; + clock-output-names = "dpll_usb_ck"; clocks = <&sys_clkin>, <&dpll_usb_byp_mux>; reg = <0x0180>, <0x0184>, <0x018c>, <0x0188>; }; @@ -649,6 +730,7 @@ dpll_usb_clkdcoldo: dpll_usb_clkdcoldo { #clock-cells = <0>; compatible = "fixed-factor-clock"; + clock-output-names = "dpll_usb_clkdcoldo"; clocks = <&dpll_usb_ck>; clock-mult = <1>; clock-div = <1>; @@ -657,6 +739,7 @@ dpll_usb_m2_ck: dpll_usb_m2_ck@190 { #clock-cells = <0>; compatible = "ti,divider-clock"; + clock-output-names = "dpll_usb_m2_ck"; clocks = <&dpll_usb_ck>; ti,max-div = <127>; reg = <0x0190>; @@ -666,6 +749,7 @@ func_128m_clk: func_128m_clk { #clock-cells = <0>; compatible = "fixed-factor-clock"; + clock-output-names = "func_128m_clk"; clocks = <&dpll_per_h11x2_ck>; clock-mult = <1>; clock-div = <2>; @@ -674,6 +758,7 @@ func_12m_fclk: func_12m_fclk { #clock-cells = <0>; compatible = "fixed-factor-clock"; + clock-output-names = "func_12m_fclk"; clocks = <&dpll_per_m2x2_ck>; clock-mult = <1>; clock-div = <16>; @@ -682,6 +767,7 @@ func_24m_clk: func_24m_clk { #clock-cells = <0>; compatible = "fixed-factor-clock"; + clock-output-names = "func_24m_clk"; clocks = <&dpll_per_m2_ck>; clock-mult = <1>; clock-div = <4>; @@ -690,6 +776,7 @@ func_48m_fclk: func_48m_fclk { #clock-cells = <0>; compatible = "fixed-factor-clock"; + clock-output-names = "func_48m_fclk"; clocks = <&dpll_per_m2x2_ck>; clock-mult = <1>; clock-div = <4>; @@ -698,6 +785,7 @@ func_96m_fclk: func_96m_fclk { #clock-cells = <0>; compatible = "fixed-factor-clock"; + clock-output-names = "func_96m_fclk"; clocks = <&dpll_per_m2x2_ck>; clock-mult = <1>; clock-div = <2>; @@ -706,6 +794,7 @@ l3init_60m_fclk: l3init_60m_fclk@104 { #clock-cells = <0>; compatible = "ti,divider-clock"; + clock-output-names = "l3init_60m_fclk"; clocks = <&dpll_usb_m2_ck>; reg = <0x0104>; ti,dividers = <1>, <8>; @@ -714,6 +803,7 @@ iss_ctrlclk: iss_ctrlclk@1320 { #clock-cells = <0>; compatible = "ti,gate-clock"; + clock-output-names = "iss_ctrlclk"; clocks = <&func_96m_fclk>; ti,bit-shift = <8>; reg = <0x1320>; @@ -722,6 +812,7 @@ lli_txphy_clk: lli_txphy_clk@f20 { #clock-cells = <0>; compatible = "ti,gate-clock"; + clock-output-names = "lli_txphy_clk"; clocks = <&dpll_unipro1_clkdcoldo>; ti,bit-shift = <8>; reg = <0x0f20>; @@ -730,6 +821,7 @@ lli_txphy_ls_clk: lli_txphy_ls_clk@f20 { #clock-cells = <0>; compatible = "ti,gate-clock"; + clock-output-names = "lli_txphy_ls_clk"; clocks = <&dpll_unipro1_m2_ck>; ti,bit-shift = <9>; reg = <0x0f20>; @@ -738,6 +830,7 @@ usb_phy_cm_clk32k: usb_phy_cm_clk32k@640 { #clock-cells = <0>; compatible = "ti,gate-clock"; + clock-output-names = "usb_phy_cm_clk32k"; clocks = <&sys_32k_ck>; ti,bit-shift = <8>; reg = <0x0640>; @@ -746,6 +839,7 @@ fdif_fclk: fdif_fclk@1328 { #clock-cells = <0>; compatible = "ti,divider-clock"; + clock-output-names = "fdif_fclk"; clocks = <&dpll_per_h11x2_ck>; ti,bit-shift = <24>; ti,max-div = <2>; @@ -755,6 +849,7 @@ gpu_core_gclk_mux: gpu_core_gclk_mux@1520 { #clock-cells = <0>; compatible = "ti,mux-clock"; + clock-output-names = "gpu_core_gclk_mux"; clocks = <&dpll_core_h14x2_ck>, <&dpll_per_h14x2_ck>; ti,bit-shift = <24>; reg = <0x1520>; @@ -763,6 +858,7 @@ gpu_hyd_gclk_mux: gpu_hyd_gclk_mux@1520 { #clock-cells = <0>; compatible = "ti,mux-clock"; + clock-output-names = "gpu_hyd_gclk_mux"; clocks = <&dpll_core_h14x2_ck>, <&dpll_per_h14x2_ck>; ti,bit-shift = <25>; reg = <0x1520>; @@ -771,6 +867,7 @@ hsi_fclk: hsi_fclk@1638 { #clock-cells = <0>; compatible = "ti,divider-clock"; + clock-output-names = "hsi_fclk"; clocks = <&dpll_per_m2x2_ck>; ti,bit-shift = <24>; ti,max-div = <2>; @@ -781,6 +878,7 @@ &cm_core_clockdomains { l3init_clkdm: l3init_clkdm { compatible = "ti,clockdomain"; + clock-output-names = "l3init_clkdm"; clocks = <&dpll_usb_ck>; }; }; @@ -789,6 +887,7 @@ auxclk0_src_gate_ck: auxclk0_src_gate_ck@310 { #clock-cells = <0>; compatible = "ti,composite-no-wait-gate-clock"; + clock-output-names = "auxclk0_src_gate_ck"; clocks = <&dpll_core_m3x2_ck>; ti,bit-shift = <8>; reg = <0x0310>; @@ -797,6 +896,7 @@ auxclk0_src_mux_ck: auxclk0_src_mux_ck@310 { #clock-cells = <0>; compatible = "ti,composite-mux-clock"; + clock-output-names = "auxclk0_src_mux_ck"; clocks = <&sys_clkin>, <&dpll_core_m3x2_ck>, <&dpll_per_m3x2_ck>; ti,bit-shift = <1>; reg = <0x0310>; @@ -805,12 +905,14 @@ auxclk0_src_ck: auxclk0_src_ck { #clock-cells = <0>; compatible = "ti,composite-clock"; + clock-output-names = "auxclk0_src_ck"; clocks = <&auxclk0_src_gate_ck>, <&auxclk0_src_mux_ck>; }; auxclk0_ck: auxclk0_ck@310 { #clock-cells = <0>; compatible = "ti,divider-clock"; + clock-output-names = "auxclk0_ck"; clocks = <&auxclk0_src_ck>; ti,bit-shift = <16>; ti,max-div = <16>; @@ -820,6 +922,7 @@ auxclk1_src_gate_ck: auxclk1_src_gate_ck@314 { #clock-cells = <0>; compatible = "ti,composite-no-wait-gate-clock"; + clock-output-names = "auxclk1_src_gate_ck"; clocks = <&dpll_core_m3x2_ck>; ti,bit-shift = <8>; reg = <0x0314>; @@ -828,6 +931,7 @@ auxclk1_src_mux_ck: auxclk1_src_mux_ck@314 { #clock-cells = <0>; compatible = "ti,composite-mux-clock"; + clock-output-names = "auxclk1_src_mux_ck"; clocks = <&sys_clkin>, <&dpll_core_m3x2_ck>, <&dpll_per_m3x2_ck>; ti,bit-shift = <1>; reg = <0x0314>; @@ -836,12 +940,14 @@ auxclk1_src_ck: auxclk1_src_ck { #clock-cells = <0>; compatible = "ti,composite-clock"; + clock-output-names = "auxclk1_src_ck"; clocks = <&auxclk1_src_gate_ck>, <&auxclk1_src_mux_ck>; }; auxclk1_ck: auxclk1_ck@314 { #clock-cells = <0>; compatible = "ti,divider-clock"; + clock-output-names = "auxclk1_ck"; clocks = <&auxclk1_src_ck>; ti,bit-shift = <16>; ti,max-div = <16>; @@ -851,6 +957,7 @@ auxclk2_src_gate_ck: auxclk2_src_gate_ck@318 { #clock-cells = <0>; compatible = "ti,composite-no-wait-gate-clock"; + clock-output-names = "auxclk2_src_gate_ck"; clocks = <&dpll_core_m3x2_ck>; ti,bit-shift = <8>; reg = <0x0318>; @@ -859,6 +966,7 @@ auxclk2_src_mux_ck: auxclk2_src_mux_ck@318 { #clock-cells = <0>; compatible = "ti,composite-mux-clock"; + clock-output-names = "auxclk2_src_mux_ck"; clocks = <&sys_clkin>, <&dpll_core_m3x2_ck>, <&dpll_per_m3x2_ck>; ti,bit-shift = <1>; reg = <0x0318>; @@ -867,12 +975,14 @@ auxclk2_src_ck: auxclk2_src_ck { #clock-cells = <0>; compatible = "ti,composite-clock"; + clock-output-names = "auxclk2_src_ck"; clocks = <&auxclk2_src_gate_ck>, <&auxclk2_src_mux_ck>; }; auxclk2_ck: auxclk2_ck@318 { #clock-cells = <0>; compatible = "ti,divider-clock"; + clock-output-names = "auxclk2_ck"; clocks = <&auxclk2_src_ck>; ti,bit-shift = <16>; ti,max-div = <16>; @@ -882,6 +992,7 @@ auxclk3_src_gate_ck: auxclk3_src_gate_ck@31c { #clock-cells = <0>; compatible = "ti,composite-no-wait-gate-clock"; + clock-output-names = "auxclk3_src_gate_ck"; clocks = <&dpll_core_m3x2_ck>; ti,bit-shift = <8>; reg = <0x031c>; @@ -890,6 +1001,7 @@ auxclk3_src_mux_ck: auxclk3_src_mux_ck@31c { #clock-cells = <0>; compatible = "ti,composite-mux-clock"; + clock-output-names = "auxclk3_src_mux_ck"; clocks = <&sys_clkin>, <&dpll_core_m3x2_ck>, <&dpll_per_m3x2_ck>; ti,bit-shift = <1>; reg = <0x031c>; @@ -898,12 +1010,14 @@ auxclk3_src_ck: auxclk3_src_ck { #clock-cells = <0>; compatible = "ti,composite-clock"; + clock-output-names = "auxclk3_src_ck"; clocks = <&auxclk3_src_gate_ck>, <&auxclk3_src_mux_ck>; }; auxclk3_ck: auxclk3_ck@31c { #clock-cells = <0>; compatible = "ti,divider-clock"; + clock-output-names = "auxclk3_ck"; clocks = <&auxclk3_src_ck>; ti,bit-shift = <16>; ti,max-div = <16>; @@ -913,6 +1027,7 @@ auxclk4_src_gate_ck: auxclk4_src_gate_ck@320 { #clock-cells = <0>; compatible = "ti,composite-no-wait-gate-clock"; + clock-output-names = "auxclk4_src_gate_ck"; clocks = <&dpll_core_m3x2_ck>; ti,bit-shift = <8>; reg = <0x0320>; @@ -921,6 +1036,7 @@ auxclk4_src_mux_ck: auxclk4_src_mux_ck@320 { #clock-cells = <0>; compatible = "ti,composite-mux-clock"; + clock-output-names = "auxclk4_src_mux_ck"; clocks = <&sys_clkin>, <&dpll_core_m3x2_ck>, <&dpll_per_m3x2_ck>; ti,bit-shift = <1>; reg = <0x0320>; @@ -929,12 +1045,14 @@ auxclk4_src_ck: auxclk4_src_ck { #clock-cells = <0>; compatible = "ti,composite-clock"; + clock-output-names = "auxclk4_src_ck"; clocks = <&auxclk4_src_gate_ck>, <&auxclk4_src_mux_ck>; }; auxclk4_ck: auxclk4_ck@320 { #clock-cells = <0>; compatible = "ti,divider-clock"; + clock-output-names = "auxclk4_ck"; clocks = <&auxclk4_src_ck>; ti,bit-shift = <16>; ti,max-div = <16>; @@ -944,6 +1062,7 @@ auxclkreq0_ck: auxclkreq0_ck@210 { #clock-cells = <0>; compatible = "ti,mux-clock"; + clock-output-names = "auxclkreq0_ck"; clocks = <&auxclk0_ck>, <&auxclk1_ck>, <&auxclk2_ck>, <&auxclk3_ck>, <&auxclk4_ck>; ti,bit-shift = <2>; reg = <0x0210>; @@ -952,6 +1071,7 @@ auxclkreq1_ck: auxclkreq1_ck@214 { #clock-cells = <0>; compatible = "ti,mux-clock"; + clock-output-names = "auxclkreq1_ck"; clocks = <&auxclk0_ck>, <&auxclk1_ck>, <&auxclk2_ck>, <&auxclk3_ck>, <&auxclk4_ck>; ti,bit-shift = <2>; reg = <0x0214>; @@ -960,6 +1080,7 @@ auxclkreq2_ck: auxclkreq2_ck@218 { #clock-cells = <0>; compatible = "ti,mux-clock"; + clock-output-names = "auxclkreq2_ck"; clocks = <&auxclk0_ck>, <&auxclk1_ck>, <&auxclk2_ck>, <&auxclk3_ck>, <&auxclk4_ck>; ti,bit-shift = <2>; reg = <0x0218>; @@ -968,6 +1089,7 @@ auxclkreq3_ck: auxclkreq3_ck@21c { #clock-cells = <0>; compatible = "ti,mux-clock"; + clock-output-names = "auxclkreq3_ck"; clocks = <&auxclk0_ck>, <&auxclk1_ck>, <&auxclk2_ck>, <&auxclk3_ck>, <&auxclk4_ck>; ti,bit-shift = <2>; reg = <0x021c>; @@ -977,6 +1099,7 @@ &cm_core_aon { mpu_cm: mpu_cm@300 { compatible = "ti,omap4-cm"; + clock-output-names = "mpu_cm"; reg = <0x300 0x100>; #address-cells = <1>; #size-cells = <1>; @@ -984,6 +1107,7 @@ mpu_clkctrl: clk@20 { compatible = "ti,clkctrl"; + clock-output-names = "mpu_clkctrl"; reg = <0x20 0x4>; #clock-cells = <2>; }; @@ -991,6 +1115,7 @@ dsp_cm: dsp_cm@400 { compatible = "ti,omap4-cm"; + clock-output-names = "dsp_cm"; reg = <0x400 0x100>; #address-cells = <1>; #size-cells = <1>; @@ -998,6 +1123,7 @@ dsp_clkctrl: clk@20 { compatible = "ti,clkctrl"; + clock-output-names = "dsp_clkctrl"; reg = <0x20 0x4>; #clock-cells = <2>; }; @@ -1005,6 +1131,7 @@ abe_cm: abe_cm@500 { compatible = "ti,omap4-cm"; + clock-output-names = "abe_cm"; reg = <0x500 0x100>; #address-cells = <1>; #size-cells = <1>; @@ -1012,6 +1139,7 @@ abe_clkctrl: clk@20 { compatible = "ti,clkctrl"; + clock-output-names = "abe_clkctrl"; reg = <0x20 0x64>; #clock-cells = <2>; }; @@ -1022,6 +1150,7 @@ &cm_core { l3main1_cm: l3main1_cm@700 { compatible = "ti,omap4-cm"; + clock-output-names = "l3main1_cm"; reg = <0x700 0x100>; #address-cells = <1>; #size-cells = <1>; @@ -1029,6 +1158,7 @@ l3main1_clkctrl: clk@20 { compatible = "ti,clkctrl"; + clock-output-names = "l3main1_clkctrl"; reg = <0x20 0x4>; #clock-cells = <2>; }; @@ -1036,6 +1166,7 @@ l3main2_cm: l3main2_cm@800 { compatible = "ti,omap4-cm"; + clock-output-names = "l3main2_cm"; reg = <0x800 0x100>; #address-cells = <1>; #size-cells = <1>; @@ -1043,6 +1174,7 @@ l3main2_clkctrl: clk@20 { compatible = "ti,clkctrl"; + clock-output-names = "l3main2_clkctrl"; reg = <0x20 0x4>; #clock-cells = <2>; }; @@ -1050,6 +1182,7 @@ ipu_cm: ipu_cm@900 { compatible = "ti,omap4-cm"; + clock-output-names = "ipu_cm"; reg = <0x900 0x100>; #address-cells = <1>; #size-cells = <1>; @@ -1057,6 +1190,7 @@ ipu_clkctrl: clk@20 { compatible = "ti,clkctrl"; + clock-output-names = "ipu_clkctrl"; reg = <0x20 0x4>; #clock-cells = <2>; }; @@ -1064,6 +1198,7 @@ dma_cm: dma_cm@a00 { compatible = "ti,omap4-cm"; + clock-output-names = "dma_cm"; reg = <0xa00 0x100>; #address-cells = <1>; #size-cells = <1>; @@ -1071,6 +1206,7 @@ dma_clkctrl: clk@20 { compatible = "ti,clkctrl"; + clock-output-names = "dma_clkctrl"; reg = <0x20 0x4>; #clock-cells = <2>; }; @@ -1078,6 +1214,7 @@ emif_cm: emif_cm@b00 { compatible = "ti,omap4-cm"; + clock-output-names = "emif_cm"; reg = <0xb00 0x100>; #address-cells = <1>; #size-cells = <1>; @@ -1085,6 +1222,7 @@ emif_clkctrl: clk@20 { compatible = "ti,clkctrl"; + clock-output-names = "emif_clkctrl"; reg = <0x20 0x1c>; #clock-cells = <2>; }; @@ -1092,6 +1230,7 @@ l4cfg_cm: l4cfg_cm@d00 { compatible = "ti,omap4-cm"; + clock-output-names = "l4cfg_cm"; reg = <0xd00 0x100>; #address-cells = <1>; #size-cells = <1>; @@ -1099,6 +1238,7 @@ l4cfg_clkctrl: clk@20 { compatible = "ti,clkctrl"; + clock-output-names = "l4cfg_clkctrl"; reg = <0x20 0x14>; #clock-cells = <2>; }; @@ -1106,6 +1246,7 @@ l3instr_cm: l3instr_cm@e00 { compatible = "ti,omap4-cm"; + clock-output-names = "l3instr_cm"; reg = <0xe00 0x100>; #address-cells = <1>; #size-cells = <1>; @@ -1113,26 +1254,30 @@ l3instr_clkctrl: clk@20 { compatible = "ti,clkctrl"; + clock-output-names = "l3instr_clkctrl"; reg = <0x20 0xc>; #clock-cells = <2>; }; }; - l4per_cm: l4per_cm@1000 { + l4per_cm: clock@1000 { compatible = "ti,omap4-cm"; + clock-output-names = "l4per_cm"; reg = <0x1000 0x200>; #address-cells = <1>; #size-cells = <1>; ranges = <0 0x1000 0x200>; l4per_clkctrl: clock@20 { - compatible = "ti,clkctrl-l4per", "ti,clkctrl"; + compatible = "ti,clkctrl"; + clock-output-names = "l4per_clkctrl"; reg = <0x20 0x15c>; #clock-cells = <2>; }; l4sec_clkctrl: clock@1a0 { - compatible = "ti,clkctrl-l4sec", "ti,clkctrl"; + compatible = "ti,clkctrl"; + clock-output-names = "l4sec_clkctrl"; reg = <0x1a0 0x3c>; #clock-cells = <2>; }; @@ -1140,6 +1285,7 @@ dss_cm: dss_cm@1400 { compatible = "ti,omap4-cm"; + clock-output-names = "dss_cm"; reg = <0x1400 0x100>; #address-cells = <1>; #size-cells = <1>; @@ -1147,6 +1293,7 @@ dss_clkctrl: clk@20 { compatible = "ti,clkctrl"; + clock-output-names = "dss_clkctrl"; reg = <0x20 0x4>; #clock-cells = <2>; }; @@ -1154,6 +1301,7 @@ gpu_cm: gpu_cm@1500 { compatible = "ti,omap4-cm"; + clock-output-names = "gpu_cm"; reg = <0x1500 0x100>; #address-cells = <1>; #size-cells = <1>; @@ -1161,6 +1309,7 @@ gpu_clkctrl: clk@20 { compatible = "ti,clkctrl"; + clock-output-names = "gpu_clkctrl"; reg = <0x20 0x4>; #clock-cells = <2>; }; @@ -1168,6 +1317,7 @@ l3init_cm: l3init_cm@1600 { compatible = "ti,omap4-cm"; + clock-output-names = "l3init_cm"; reg = <0x1600 0x100>; #address-cells = <1>; #size-cells = <1>; @@ -1175,6 +1325,7 @@ l3init_clkctrl: clk@20 { compatible = "ti,clkctrl"; + clock-output-names = "l3init_clkctrl"; reg = <0x20 0xd4>; #clock-cells = <2>; }; @@ -1184,6 +1335,7 @@ &prm { wkupaon_cm: wkupaon_cm@1900 { compatible = "ti,omap4-cm"; + clock-output-names = "wkupaon_cm"; reg = <0x1900 0x100>; #address-cells = <1>; #size-cells = <1>; @@ -1191,6 +1343,7 @@ wkupaon_clkctrl: clk@20 { compatible = "ti,clkctrl"; + clock-output-names = "wkupaon_clkctrl"; reg = <0x20 0x5c>; #clock-cells = <2>; }; @@ -1201,6 +1354,7 @@ fref_xtal_ck: fref_xtal_ck { #clock-cells = <0>; compatible = "ti,gate-clock"; + clock-output-names = "fref_xtal_ck"; clocks = <&sys_clkin>; ti,bit-shift = <28>; reg = <0x14>; diff --git a/arch/arm/boot/dts/ox820.dtsi b/arch/arm/boot/dts/ox820.dtsi index 90846a7655b4..dde4364892bf 100644 --- a/arch/arm/boot/dts/ox820.dtsi +++ b/arch/arm/boot/dts/ox820.dtsi @@ -287,7 +287,7 @@ clocks = <&armclk>; }; - gic: gic@1000 { + gic: interrupt-controller@1000 { compatible = "arm,arm11mp-gic"; interrupt-controller; #interrupt-cells = <3>; diff --git a/arch/arm/boot/dts/qcom-apq8026-asus-sparrow.dts b/arch/arm/boot/dts/qcom-apq8026-asus-sparrow.dts new file mode 100644 index 000000000000..ace8cea27949 --- /dev/null +++ b/arch/arm/boot/dts/qcom-apq8026-asus-sparrow.dts @@ -0,0 +1,294 @@ +// SPDX-License-Identifier: BSD-3-Clause +/* + * Copyright (c) 2022, Luca Weiss <luca@z3ntu.xyz> + */ + +/dts-v1/; + +#include "qcom-msm8226.dtsi" +#include "qcom-pm8226.dtsi" + +/ { + model = "ASUS ZenWatch 2"; + compatible = "asus,sparrow", "qcom,apq8026"; + chassis-type = "watch"; + qcom,msm-id = <199 0x20000>; + qcom,board-id = <8 3005>; + + reserved-memory { + sbl_region: sbl@2f00000 { + reg = <0x02f00000 0x100000>; + no-map; + }; + external_image_region: external-image@3100000 { + reg = <0x3100000 0x200000>; + no-map; + }; + peripheral_region: peripheral@3300000 { + reg = <0x3300000 0x600000>; + no-map; + }; + adsp_region: adsp@3900000 { + reg = <0x3900000 0x1400000>; + no-map; + }; + modem_region: modem@4d00000 { + reg = <0x4d00000 0x1b00000>; + no-map; + }; + modem_efs_region: modem-efs@7f00000 { + reg = <0x7f00000 0x100000>; + no-map; + }; + }; + + vreg_wlan: wlan-regulator { + compatible = "regulator-fixed"; + + regulator-name = "wl-reg"; + regulator-min-microvolt = <2950000>; + regulator-max-microvolt = <2950000>; + + gpio = <&tlmm 35 GPIO_ACTIVE_HIGH>; + enable-active-high; + + pinctrl-names = "default"; + pinctrl-0 = <&wlan_regulator_default_state>; + }; +}; + +&blsp1_uart1 { + status = "okay"; + + pinctrl-names = "default"; + pinctrl-0 = <&blsp1_uart1_default_state>; + + bluetooth { + compatible = "brcm,bcm43430a1-bt"; + max-speed = <3000000>; + + pinctrl-names = "default"; + pinctrl-0 = <&bluetooth_default_state>; + + host-wakeup-gpios = <&tlmm 48 GPIO_ACTIVE_HIGH>; + device-wakeup-gpios = <&tlmm 61 GPIO_ACTIVE_HIGH>; + shutdown-gpios = <&tlmm 34 GPIO_ACTIVE_HIGH>; + }; +}; + +&pm8226_vib { + status = "okay"; +}; + +&rpm_requests { + pm8226-regulators { + compatible = "qcom,rpm-pm8226-regulators"; + + pm8226_s3: s3 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1300000>; + }; + pm8226_s4: s4 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <2200000>; + }; + pm8226_s5: s5 { + regulator-min-microvolt = <1150000>; + regulator-max-microvolt = <1150000>; + }; + + pm8226_l1: l1 { + regulator-min-microvolt = <1225000>; + regulator-max-microvolt = <1225000>; + }; + pm8226_l2: l2 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + }; + pm8226_l3: l3 { + regulator-min-microvolt = <750000>; + regulator-max-microvolt = <1337500>; + }; + pm8226_l4: l4 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + }; + pm8226_l5: l5 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + }; + pm8226_l6: l6 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + pm8226_l7: l7 { + regulator-min-microvolt = <1900000>; + regulator-max-microvolt = <1900000>; + }; + pm8226_l8: l8 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + pm8226_l9: l9 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + pm8226_l10: l10 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + pm8226_l12: l12 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + pm8226_l14: l14 { + regulator-min-microvolt = <2750000>; + regulator-max-microvolt = <2750000>; + }; + pm8226_l15: l15 { + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + }; + pm8226_l16: l16 { + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + }; + pm8226_l17: l17 { + regulator-min-microvolt = <2950000>; + regulator-max-microvolt = <2950000>; + }; + pm8226_l18: l18 { + regulator-min-microvolt = <2950000>; + regulator-max-microvolt = <2950000>; + }; + pm8226_l19: l19 { + regulator-min-microvolt = <2850000>; + regulator-max-microvolt = <2850000>; + }; + pm8226_l20: l20 { + regulator-min-microvolt = <3075000>; + regulator-max-microvolt = <3075000>; + }; + pm8226_l21: l21 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <2950000>; + }; + pm8226_l22: l22 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <2950000>; + }; + pm8226_l23: l23 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + pm8226_l24: l24 { + regulator-min-microvolt = <1300000>; + regulator-max-microvolt = <1350000>; + }; + pm8226_l25: l25 { + regulator-min-microvolt = <1775000>; + regulator-max-microvolt = <2125000>; + }; + pm8226_l26: l26 { + regulator-min-microvolt = <1225000>; + regulator-max-microvolt = <1225000>; + }; + pm8226_l27: l27 { + regulator-min-microvolt = <2050000>; + regulator-max-microvolt = <2050000>; + }; + pm8226_l28: l28 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <2950000>; + }; + + pm8226_lvs1: lvs1 {}; + }; +}; + +&sdhc_1 { + status = "okay"; + + vmmc-supply = <&pm8226_l17>; + vqmmc-supply = <&pm8226_l6>; + + bus-width = <8>; + non-removable; +}; + +&sdhc_3 { + status = "okay"; + + max-frequency = <100000000>; + non-removable; + + vmmc-supply = <&vreg_wlan>; + vqmmc-supply = <&pm8226_l6>; + + #address-cells = <1>; + #size-cells = <0>; + + wifi@1 { + compatible = "brcm,bcm43430a1-fmac", "brcm,bcm4329-fmac"; + reg = <1>; + + interrupts-extended = <&tlmm 46 IRQ_TYPE_EDGE_FALLING>; + interrupt-names = "host-wake"; + + pinctrl-names = "default"; + pinctrl-0 = <&wlan_hostwake_default_state>; + }; +}; + +&smbb { + qcom,fast-charge-safe-current = <1500000>; + qcom,fast-charge-current-limit = <350000>; + qcom,fast-charge-safe-voltage = <4430000>; + qcom,fast-charge-high-threshold-voltage = <4400000>; + qcom,auto-recharge-threshold-voltage = <4300000>; + qcom,minimum-input-voltage = <4400000>; +}; + +&tlmm { + blsp1_uart1_default_state: blsp1-uart1-default-state { + pins = "gpio0", "gpio1", "gpio2", "gpio3"; + function = "blsp_uart1"; + drive-strength = <8>; + bias-disable; + }; + + bluetooth_default_state: bluetooth-default-state { + pins = "gpio48", "gpio61"; + function = "gpio"; + drive-strength = <8>; + bias-disable; + input-enable; + }; + + wlan_hostwake_default_state: wlan-hostwake-default-state { + pins = "gpio46"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + input-enable; + }; + + wlan_regulator_default_state: wlan-regulator-default-state { + pins = "gpio35"; + function = "gpio"; + drive-strength = <2>; + bias-pull-up; + }; +}; + +&usb { + status = "okay"; + extcon = <&smbb>; + dr_mode = "peripheral"; +}; + +&usb_hs_phy { + extcon = <&smbb>; + v1p8-supply = <&pm8226_l10>; + v3p3-supply = <&pm8226_l20>; +}; diff --git a/arch/arm/boot/dts/qcom-apq8064-sony-xperia-yuga.dts b/arch/arm/boot/dts/qcom-apq8064-sony-xperia-lagan-yuga.dts index 0cee62c7b8b0..0cee62c7b8b0 100644 --- a/arch/arm/boot/dts/qcom-apq8064-sony-xperia-yuga.dts +++ b/arch/arm/boot/dts/qcom-apq8064-sony-xperia-lagan-yuga.dts diff --git a/arch/arm/boot/dts/qcom-apq8064.dtsi b/arch/arm/boot/dts/qcom-apq8064.dtsi index a1c8ae516d21..34c0ba7fa358 100644 --- a/arch/arm/boot/dts/qcom-apq8064.dtsi +++ b/arch/arm/boot/dts/qcom-apq8064.dtsi @@ -227,7 +227,7 @@ smd { compatible = "qcom,smd"; - modem@0 { + modem-edge { interrupts = <0 37 IRQ_TYPE_EDGE_RISING>; qcom,ipc = <&l2cc 8 3>; @@ -236,7 +236,7 @@ status = "disabled"; }; - q6@1 { + q6-edge { interrupts = <0 90 IRQ_TYPE_EDGE_RISING>; qcom,ipc = <&l2cc 8 15>; @@ -245,7 +245,7 @@ status = "disabled"; }; - dsps@3 { + dsps-edge { interrupts = <0 138 IRQ_TYPE_EDGE_RISING>; qcom,ipc = <&sps_sic_non_secure 0x4080 0>; @@ -254,7 +254,7 @@ status = "disabled"; }; - riva@6 { + riva-edge { interrupts = <0 198 IRQ_TYPE_EDGE_RISING>; qcom,ipc = <&l2cc 8 25>; @@ -1040,7 +1040,7 @@ }; /* Temporary fixed regulator */ - sdcc1bam:dma@12402000{ + sdcc1bam: dma-controller@12402000{ compatible = "qcom,bam-v1.3.0"; reg = <0x12402000 0x8000>; interrupts = <0 98 IRQ_TYPE_LEVEL_HIGH>; @@ -1050,7 +1050,7 @@ qcom,ee = <0>; }; - sdcc3bam:dma@12182000{ + sdcc3bam: dma-controller@12182000{ compatible = "qcom,bam-v1.3.0"; reg = <0x12182000 0x8000>; interrupts = <0 96 IRQ_TYPE_LEVEL_HIGH>; @@ -1060,7 +1060,7 @@ qcom,ee = <0>; }; - sdcc4bam:dma@121c2000{ + sdcc4bam: dma-controller@121c2000{ compatible = "qcom,bam-v1.3.0"; reg = <0x121c2000 0x8000>; interrupts = <0 95 IRQ_TYPE_LEVEL_HIGH>; @@ -1548,7 +1548,7 @@ qcom,mmio = <&riva>; - bt { + bluetooth { compatible = "qcom,wcnss-bt"; }; diff --git a/arch/arm/boot/dts/qcom-apq8074-dragonboard.dts b/arch/arm/boot/dts/qcom-apq8074-dragonboard.dts index 83793b835d40..3051a861ff0c 100644 --- a/arch/arm/boot/dts/qcom-apq8074-dragonboard.dts +++ b/arch/arm/boot/dts/qcom-apq8074-dragonboard.dts @@ -16,331 +16,293 @@ chosen { stdout-path = "serial0:115200n8"; }; +}; + +&blsp1_uart2 { + status = "okay"; +}; - soc { - serial@f991e000 { +&blsp2_i2c5 { + status = "okay"; + clock-frequency = <200000>; + + eeprom: eeprom@52 { + compatible = "atmel,24c128"; + reg = <0x52>; + pagesize = <32>; + read-only; + }; +}; + +&otg { + status = "okay"; + + phys = <&usb_hs2_phy>; + phy-select = <&tcsr 0xb000 1>; + extcon = <&smbb>, <&usb_id>; + vbus-supply = <&chg_otg>; + hnp-disable; + srp-disable; + adp-disable; + + ulpi { + phy@b { status = "okay"; + v3p3-supply = <&pm8941_l24>; + v1p8-supply = <&pm8941_l6>; + extcon = <&smbb>; + qcom,init-seq = /bits/ 8 <0x1 0x63>; + }; + }; +}; + +&rpm_requests { + pm8841-regulators { + compatible = "qcom,rpm-pm8841-regulators"; + + pm8841_s1: s1 { + regulator-min-microvolt = <675000>; + regulator-max-microvolt = <1050000>; }; - sdhci@f9824900 { - bus-width = <8>; - non-removable; - status = "okay"; + pm8841_s2: s2 { + regulator-min-microvolt = <500000>; + regulator-max-microvolt = <1050000>; + }; - vmmc-supply = <&pm8941_l20>; - vqmmc-supply = <&pm8941_s3>; + pm8841_s3: s3 { + regulator-min-microvolt = <500000>; + regulator-max-microvolt = <1050000>; + }; - pinctrl-names = "default"; - pinctrl-0 = <&sdhc1_pin_a>; + pm8841_s4: s4 { + regulator-min-microvolt = <500000>; + regulator-max-microvolt = <1050000>; }; + }; - sdhci@f98a4900 { - cd-gpios = <&msmgpio 62 0x1>; - pinctrl-names = "default"; - pinctrl-0 = <&sdhc2_pin_a>, <&sdhc2_cd_pin_a>; - bus-width = <4>; - status = "okay"; + pm8941-regulators { + compatible = "qcom,rpm-pm8941-regulators"; + + vdd_l1_l3-supply = <&pm8941_s1>; + vdd_l2_lvs1_2_3-supply = <&pm8941_s3>; + vdd_l4_l11-supply = <&pm8941_s1>; + vdd_l5_l7-supply = <&pm8941_s2>; + vdd_l6_l12_l14_l15-supply = <&pm8941_s2>; + vin_5vs-supply = <&pm8941_5v>; + + pm8941_s1: s1 { + regulator-min-microvolt = <1300000>; + regulator-max-microvolt = <1300000>; + regulator-always-on; + regulator-boot-on; + }; - vmmc-supply = <&pm8941_l21>; - vqmmc-supply = <&pm8941_l13>; + pm8941_s2: s2 { + regulator-min-microvolt = <2150000>; + regulator-max-microvolt = <2150000>; + regulator-boot-on; }; - usb@f9a55000 { - status = "okay"; - phys = <&usb_hs2_phy>; - phy-select = <&tcsr 0xb000 1>; - extcon = <&smbb>, <&usb_id>; - vbus-supply = <&chg_otg>; - hnp-disable; - srp-disable; - adp-disable; - ulpi { - phy@b { - status = "okay"; - v3p3-supply = <&pm8941_l24>; - v1p8-supply = <&pm8941_l6>; - extcon = <&smbb>; - qcom,init-seq = /bits/ 8 <0x1 0x63>; - }; - }; - }; - - - pinctrl@fd510000 { - i2c11_pins: i2c11 { - mux { - pins = "gpio83", "gpio84"; - function = "blsp_i2c11"; - }; - }; - - spi8_default: spi8_default { - mosi { - pins = "gpio45"; - function = "blsp_spi8"; - }; - miso { - pins = "gpio46"; - function = "blsp_spi8"; - }; - cs { - pins = "gpio47"; - function = "blsp_spi8"; - }; - clk { - pins = "gpio48"; - function = "blsp_spi8"; - }; - }; - - sdhc1_pin_a: sdhc1-pin-active { - clk { - pins = "sdc1_clk"; - drive-strength = <16>; - bias-disable; - }; - - cmd-data { - pins = "sdc1_cmd", "sdc1_data"; - drive-strength = <10>; - bias-pull-up; - }; - }; - - sdhc2_cd_pin_a: sdhc2-cd-pin-active { - pins = "gpio62"; - function = "gpio"; - - drive-strength = <2>; - bias-disable; - }; - - sdhc2_pin_a: sdhc2-pin-active { - clk { - pins = "sdc2_clk"; - drive-strength = <10>; - bias-disable; - }; - - cmd-data { - pins = "sdc2_cmd", "sdc2_data"; - drive-strength = <6>; - bias-pull-up; - }; - }; - }; - - i2c@f9967000 { - status = "okay"; - clock-frequency = <200000>; - pinctrl-0 = <&i2c11_pins>; - pinctrl-names = "default"; + pm8941_s3: s3 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + regulator-boot-on; + }; + + pm8941_l1: l1 { + regulator-min-microvolt = <1225000>; + regulator-max-microvolt = <1225000>; + regulator-always-on; + regulator-boot-on; + }; + + pm8941_l2: l2 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + }; + + pm8941_l3: l3 { + regulator-min-microvolt = <1225000>; + regulator-max-microvolt = <1225000>; + }; + + pm8941_l4: l4 { + regulator-min-microvolt = <1225000>; + regulator-max-microvolt = <1225000>; + }; + + pm8941_l5: l5 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; - eeprom: eeprom@52 { - compatible = "atmel,24c128"; - reg = <0x52>; - pagesize = <32>; - read-only; - }; + pm8941_l6: l6 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-boot-on; + }; + + pm8941_l7: l7 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-boot-on; + }; + + pm8941_l8: l8 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + pm8941_l9: l9 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <2950000>; + }; + + pm8941_l10: l10 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + }; + + pm8941_l11: l11 { + regulator-min-microvolt = <1300000>; + regulator-max-microvolt = <1300000>; + }; + + pm8941_l12: l12 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + regulator-boot-on; + }; + + pm8941_l13: l13 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <2950000>; + regulator-boot-on; + }; + + pm8941_l14: l14 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + pm8941_l15: l15 { + regulator-min-microvolt = <2050000>; + regulator-max-microvolt = <2050000>; + }; + + pm8941_l16: l16 { + regulator-min-microvolt = <2700000>; + regulator-max-microvolt = <2700000>; + }; + + pm8941_l17: l17 { + regulator-min-microvolt = <2700000>; + regulator-max-microvolt = <2700000>; + }; + + pm8941_l18: l18 { + regulator-min-microvolt = <2850000>; + regulator-max-microvolt = <2850000>; + }; + + pm8941_l19: l19 { + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + + pm8941_l20: l20 { + regulator-min-microvolt = <2950000>; + regulator-max-microvolt = <2950000>; + regulator-system-load = <200000>; + regulator-allow-set-load; + regulator-boot-on; + }; + + pm8941_l21: l21 { + regulator-min-microvolt = <2950000>; + regulator-max-microvolt = <2950000>; + regulator-boot-on; + }; + + pm8941_l22: l22 { + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + }; + + pm8941_l23: l23 { + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + }; + + pm8941_l24: l24 { + regulator-min-microvolt = <3075000>; + regulator-max-microvolt = <3075000>; + regulator-boot-on; }; }; +}; + +&sdhc_1 { + status = "okay"; + + vmmc-supply = <&pm8941_l20>; + vqmmc-supply = <&pm8941_s3>; + + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&sdc1_on>; + pinctrl-1 = <&sdc1_off>; +}; + +&sdhc_2 { + status = "okay"; + + cd-gpios = <&tlmm 62 0x1>; + vmmc-supply = <&pm8941_l21>; + vqmmc-supply = <&pm8941_l13>; + + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&sdc2_on>; + pinctrl-1 = <&sdc2_off>; +}; + +&tlmm { + sdc1_on: sdc1-on { + clk { + pins = "sdc1_clk"; + drive-strength = <16>; + bias-disable; + }; + + cmd-data { + pins = "sdc1_cmd", "sdc1_data"; + drive-strength = <10>; + bias-pull-up; + }; + }; + + sdc2_on: sdc2-on { + clk { + pins = "sdc2_clk"; + drive-strength = <10>; + bias-disable; + }; + + cmd-data { + pins = "sdc2_cmd", "sdc2_data"; + drive-strength = <6>; + bias-pull-up; + }; - smd { - rpm { - rpm_requests { - pm8841-regulators { - s1 { - regulator-min-microvolt = <675000>; - regulator-max-microvolt = <1050000>; - }; - - s2 { - regulator-min-microvolt = <500000>; - regulator-max-microvolt = <1050000>; - }; - - s3 { - regulator-min-microvolt = <500000>; - regulator-max-microvolt = <1050000>; - }; - - s4 { - regulator-min-microvolt = <500000>; - regulator-max-microvolt = <1050000>; - }; - }; - - pm8941-regulators { - vdd_l1_l3-supply = <&pm8941_s1>; - vdd_l2_lvs1_2_3-supply = <&pm8941_s3>; - vdd_l4_l11-supply = <&pm8941_s1>; - vdd_l5_l7-supply = <&pm8941_s2>; - vdd_l6_l12_l14_l15-supply = <&pm8941_s2>; - vin_5vs-supply = <&pm8941_5v>; - - s1 { - regulator-min-microvolt = <1300000>; - regulator-max-microvolt = <1300000>; - regulator-always-on; - regulator-boot-on; - }; - - s2 { - regulator-min-microvolt = <2150000>; - regulator-max-microvolt = <2150000>; - regulator-boot-on; - }; - - s3 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - regulator-always-on; - regulator-boot-on; - }; - - l1 { - regulator-min-microvolt = <1225000>; - regulator-max-microvolt = <1225000>; - - regulator-always-on; - regulator-boot-on; - }; - - l2 { - regulator-min-microvolt = <1200000>; - regulator-max-microvolt = <1200000>; - }; - - l3 { - regulator-min-microvolt = <1225000>; - regulator-max-microvolt = <1225000>; - }; - - l4 { - regulator-min-microvolt = <1225000>; - regulator-max-microvolt = <1225000>; - }; - - l5 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - }; - - l6 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - - regulator-boot-on; - }; - - l7 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - - regulator-boot-on; - }; - - l8 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - }; - - l9 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <2950000>; - }; - - l10 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - regulator-always-on; - }; - - l11 { - regulator-min-microvolt = <1300000>; - regulator-max-microvolt = <1300000>; - }; - - l12 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - - regulator-always-on; - regulator-boot-on; - }; - - l13 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <2950000>; - - regulator-boot-on; - }; - - l14 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - }; - - l15 { - regulator-min-microvolt = <2050000>; - regulator-max-microvolt = <2050000>; - }; - - l16 { - regulator-min-microvolt = <2700000>; - regulator-max-microvolt = <2700000>; - }; - - l17 { - regulator-min-microvolt = <2700000>; - regulator-max-microvolt = <2700000>; - }; - - l18 { - regulator-min-microvolt = <2850000>; - regulator-max-microvolt = <2850000>; - }; - - l19 { - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - regulator-always-on; - }; - - l20 { - regulator-min-microvolt = <2950000>; - regulator-max-microvolt = <2950000>; - - regulator-allow-set-load; - regulator-boot-on; - regulator-system-load = <200000>; - }; - - l21 { - regulator-min-microvolt = <2950000>; - regulator-max-microvolt = <2950000>; - - regulator-boot-on; - }; - - l22 { - regulator-min-microvolt = <3000000>; - regulator-max-microvolt = <3000000>; - }; - - l23 { - regulator-min-microvolt = <3000000>; - regulator-max-microvolt = <3000000>; - }; - - l24 { - regulator-min-microvolt = <3075000>; - regulator-max-microvolt = <3075000>; - - regulator-boot-on; - }; - }; - }; + cd { + pins = "gpio62"; + function = "gpio"; + drive-strength = <2>; + bias-disable; }; }; }; diff --git a/arch/arm/boot/dts/qcom-apq8084.dtsi b/arch/arm/boot/dts/qcom-apq8084.dtsi index 52240fc7a1a6..da50a1a0197f 100644 --- a/arch/arm/boot/dts/qcom-apq8084.dtsi +++ b/arch/arm/boot/dts/qcom-apq8084.dtsi @@ -470,7 +470,7 @@ qcom,ipc = <&apcs 8 0>; qcom,smd-edge = <15>; - rpm_requests { + rpm-requests { compatible = "qcom,rpm-apq8084"; qcom,smd-channels = "rpm_requests"; diff --git a/arch/arm/boot/dts/qcom-ipq4019-ap.dk01.1.dtsi b/arch/arm/boot/dts/qcom-ipq4019-ap.dk01.1.dtsi index 0c10d9e096db..03bb9e1768c4 100644 --- a/arch/arm/boot/dts/qcom-ipq4019-ap.dk01.1.dtsi +++ b/arch/arm/boot/dts/qcom-ipq4019-ap.dk01.1.dtsi @@ -64,7 +64,7 @@ }; }; - blsp_dma: dma@7884000 { + blsp_dma: dma-controller@7884000 { status = "okay"; }; @@ -89,7 +89,7 @@ status = "okay"; }; - cryptobam: dma@8e04000 { + cryptobam: dma-controller@8e04000 { status = "okay"; }; diff --git a/arch/arm/boot/dts/qcom-ipq4019-ap.dk04.1-c1.dts b/arch/arm/boot/dts/qcom-ipq4019-ap.dk04.1-c1.dts index a7b1201dd614..79b0c6318e52 100644 --- a/arch/arm/boot/dts/qcom-ipq4019-ap.dk04.1-c1.dts +++ b/arch/arm/boot/dts/qcom-ipq4019-ap.dk04.1-c1.dts @@ -8,7 +8,7 @@ compatible = "qcom,ipq4019-dk04.1-c1", "qcom,ipq4019"; soc { - dma@7984000 { + dma-controller@7984000 { status = "okay"; }; diff --git a/arch/arm/boot/dts/qcom-ipq4019-ap.dk04.1.dtsi b/arch/arm/boot/dts/qcom-ipq4019-ap.dk04.1.dtsi index 7a337dc08741..faeaa6bf0def 100644 --- a/arch/arm/boot/dts/qcom-ipq4019-ap.dk04.1.dtsi +++ b/arch/arm/boot/dts/qcom-ipq4019-ap.dk04.1.dtsi @@ -79,7 +79,7 @@ status = "okay"; }; - dma@7884000 { + dma-controller@7884000 { status = "okay"; }; @@ -89,7 +89,7 @@ status = "okay"; cs-gpios = <&tlmm 12 0>; - m25p80@0 { + flash@0 { #address-cells = <1>; #size-cells = <1>; reg = <0>; diff --git a/arch/arm/boot/dts/qcom-ipq4019-ap.dk07.1-c1.dts b/arch/arm/boot/dts/qcom-ipq4019-ap.dk07.1-c1.dts index 06f9f2cb2fe9..d596dd1180ae 100644 --- a/arch/arm/boot/dts/qcom-ipq4019-ap.dk07.1-c1.dts +++ b/arch/arm/boot/dts/qcom-ipq4019-ap.dk07.1-c1.dts @@ -52,7 +52,7 @@ status = "okay"; cs-gpios = <&tlmm 12 0>; - m25p80@0 { + flash@0 { #address-cells = <1>; #size-cells = <1>; reg = <0>; diff --git a/arch/arm/boot/dts/qcom-ipq4019-ap.dk07.1.dtsi b/arch/arm/boot/dts/qcom-ipq4019-ap.dk07.1.dtsi index 94872518b5a2..0107f552f520 100644 --- a/arch/arm/boot/dts/qcom-ipq4019-ap.dk07.1.dtsi +++ b/arch/arm/boot/dts/qcom-ipq4019-ap.dk07.1.dtsi @@ -52,7 +52,7 @@ status = "okay"; }; - dma@7884000 { + dma-controller@7884000 { status = "okay"; }; @@ -62,7 +62,7 @@ status = "okay"; }; - dma@7984000 { + dma-controller@7984000 { status = "okay"; }; diff --git a/arch/arm/boot/dts/qcom-ipq4019.dtsi b/arch/arm/boot/dts/qcom-ipq4019.dtsi index a9d0566a3190..9d5e934f2272 100644 --- a/arch/arm/boot/dts/qcom-ipq4019.dtsi +++ b/arch/arm/boot/dts/qcom-ipq4019.dtsi @@ -233,7 +233,7 @@ status = "disabled"; }; - blsp_dma: dma@7884000 { + blsp_dma: dma-controller@7884000 { compatible = "qcom,bam-v1.7.0"; reg = <0x07884000 0x23000>; interrupts = <GIC_SPI 238 IRQ_TYPE_LEVEL_HIGH>; @@ -253,8 +253,8 @@ clock-names = "core", "iface"; #address-cells = <1>; #size-cells = <0>; - dmas = <&blsp_dma 5>, <&blsp_dma 4>; - dma-names = "rx", "tx"; + dmas = <&blsp_dma 4>, <&blsp_dma 5>; + dma-names = "tx", "rx"; status = "disabled"; }; @@ -267,8 +267,8 @@ clock-names = "core", "iface"; #address-cells = <1>; #size-cells = <0>; - dmas = <&blsp_dma 7>, <&blsp_dma 6>; - dma-names = "rx", "tx"; + dmas = <&blsp_dma 6>, <&blsp_dma 7>; + dma-names = "tx", "rx"; status = "disabled"; }; @@ -276,13 +276,13 @@ compatible = "qcom,i2c-qup-v2.2.1"; reg = <0x78b7000 0x600>; interrupts = <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&gcc GCC_BLSP1_AHB_CLK>, - <&gcc GCC_BLSP1_QUP1_I2C_APPS_CLK>; - clock-names = "iface", "core"; + clocks = <&gcc GCC_BLSP1_QUP1_I2C_APPS_CLK>, + <&gcc GCC_BLSP1_AHB_CLK>; + clock-names = "core", "iface"; #address-cells = <1>; #size-cells = <0>; - dmas = <&blsp_dma 9>, <&blsp_dma 8>; - dma-names = "rx", "tx"; + dmas = <&blsp_dma 8>, <&blsp_dma 9>; + dma-names = "tx", "rx"; status = "disabled"; }; @@ -290,17 +290,17 @@ compatible = "qcom,i2c-qup-v2.2.1"; reg = <0x78b8000 0x600>; interrupts = <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&gcc GCC_BLSP1_AHB_CLK>, - <&gcc GCC_BLSP1_QUP2_I2C_APPS_CLK>; - clock-names = "iface", "core"; + clocks = <&gcc GCC_BLSP1_QUP2_I2C_APPS_CLK>, + <&gcc GCC_BLSP1_AHB_CLK>; + clock-names = "core", "iface"; #address-cells = <1>; #size-cells = <0>; - dmas = <&blsp_dma 11>, <&blsp_dma 10>; - dma-names = "rx", "tx"; + dmas = <&blsp_dma 10>, <&blsp_dma 11>; + dma-names = "tx", "rx"; status = "disabled"; }; - cryptobam: dma@8e04000 { + cryptobam: dma-controller@8e04000 { compatible = "qcom,bam-v1.7.0"; reg = <0x08e04000 0x20000>; interrupts = <GIC_SPI 207 IRQ_TYPE_LEVEL_HIGH>; @@ -382,8 +382,8 @@ clocks = <&gcc GCC_BLSP1_UART1_APPS_CLK>, <&gcc GCC_BLSP1_AHB_CLK>; clock-names = "core", "iface"; - dmas = <&blsp_dma 1>, <&blsp_dma 0>; - dma-names = "rx", "tx"; + dmas = <&blsp_dma 0>, <&blsp_dma 1>; + dma-names = "tx", "rx"; }; blsp1_uart2: serial@78b0000 { @@ -394,8 +394,8 @@ clocks = <&gcc GCC_BLSP1_UART2_APPS_CLK>, <&gcc GCC_BLSP1_AHB_CLK>; clock-names = "core", "iface"; - dmas = <&blsp_dma 3>, <&blsp_dma 2>; - dma-names = "rx", "tx"; + dmas = <&blsp_dma 2>, <&blsp_dma 3>; + dma-names = "tx", "rx"; }; watchdog: watchdog@b017000 { @@ -471,7 +471,7 @@ status = "disabled"; }; - qpic_bam: dma@7984000 { + qpic_bam: dma-controller@7984000 { compatible = "qcom,bam-v1.7.0"; reg = <0x7984000 0x1a000>; interrupts = <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>; diff --git a/arch/arm/boot/dts/qcom-ipq8064-v1.0.dtsi b/arch/arm/boot/dts/qcom-ipq8064-v1.0.dtsi index 65330065390a..5c802b99e15f 100644 --- a/arch/arm/boot/dts/qcom-ipq8064-v1.0.dtsi +++ b/arch/arm/boot/dts/qcom-ipq8064-v1.0.dtsi @@ -36,7 +36,7 @@ cs-gpios = <&qcom_pinmux 20 0>; - flash: m25p80@0 { + flash: flash@0 { compatible = "s25fl256s1"; #address-cells = <1>; #size-cells = <1>; diff --git a/arch/arm/boot/dts/qcom-ipq8064.dtsi b/arch/arm/boot/dts/qcom-ipq8064.dtsi index 8cb04aa8ed2f..808ea1862283 100644 --- a/arch/arm/boot/dts/qcom-ipq8064.dtsi +++ b/arch/arm/boot/dts/qcom-ipq8064.dtsi @@ -298,13 +298,13 @@ }; clocks { - cxo_board { + cxo_board: cxo_board { compatible = "fixed-clock"; #clock-cells = <0>; clock-frequency = <25000000>; }; - pxo_board { + pxo_board: pxo_board { compatible = "fixed-clock"; #clock-cells = <0>; clock-frequency = <25000000>; @@ -736,7 +736,9 @@ }; gcc: clock-controller@900000 { - compatible = "qcom,gcc-ipq8064"; + compatible = "qcom,gcc-ipq8064", "syscon"; + clocks = <&pxo_board>, <&cxo_board>; + clock-names = "pxo", "cxo"; reg = <0x00900000 0x4000>; #clock-cells = <1>; #reset-cells = <1>; @@ -1155,7 +1157,7 @@ regulator-always-on; }; - sdcc1bam: dma@12402000 { + sdcc1bam: dma-controller@12402000 { compatible = "qcom,bam-v1.3.0"; reg = <0x12402000 0x8000>; interrupts = <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>; @@ -1165,7 +1167,7 @@ qcom,ee = <0>; }; - sdcc3bam: dma@12182000 { + sdcc3bam: dma-controller@12182000 { compatible = "qcom,bam-v1.3.0"; reg = <0x12182000 0x8000>; interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>; diff --git a/arch/arm/boot/dts/qcom-mdm9615.dtsi b/arch/arm/boot/dts/qcom-mdm9615.dtsi index 4d4f37cebf21..8f0752ce1c7b 100644 --- a/arch/arm/boot/dts/qcom-mdm9615.dtsi +++ b/arch/arm/boot/dts/qcom-mdm9615.dtsi @@ -330,7 +330,7 @@ }; }; - sdcc1bam: dma@12182000{ + sdcc1bam: dma-controller@12182000{ compatible = "qcom,bam-v1.3.0"; reg = <0x12182000 0x8000>; interrupts = <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>; @@ -340,7 +340,7 @@ qcom,ee = <0>; }; - sdcc2bam: dma@12142000{ + sdcc2bam: dma-controller@12142000{ compatible = "qcom,bam-v1.3.0"; reg = <0x12142000 0x8000>; interrupts = <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>; diff --git a/arch/arm/boot/dts/qcom-msm8226.dtsi b/arch/arm/boot/dts/qcom-msm8226.dtsi index 85e56992d2d0..28eca15b5712 100644 --- a/arch/arm/boot/dts/qcom-msm8226.dtsi +++ b/arch/arm/boot/dts/qcom-msm8226.dtsi @@ -182,6 +182,15 @@ status = "disabled"; }; + blsp1_uart1: serial@f991d000 { + compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm"; + reg = <0xf991d000 0x1000>; + interrupts = <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&gcc GCC_BLSP1_UART1_APPS_CLK>, <&gcc GCC_BLSP1_AHB_CLK>; + clock-names = "core", "iface"; + status = "disabled"; + }; + blsp1_uart3: serial@f991f000 { compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm"; reg = <0xf991f000 0x1000>; diff --git a/arch/arm/boot/dts/qcom-msm8660.dtsi b/arch/arm/boot/dts/qcom-msm8660.dtsi index a258abb23a64..47b97daecef1 100644 --- a/arch/arm/boot/dts/qcom-msm8660.dtsi +++ b/arch/arm/boot/dts/qcom-msm8660.dtsi @@ -212,6 +212,7 @@ ranges; syscon-tcsr = <&tcsr>; + status = "disabled"; gsbi8_i2c: i2c@19880000 { compatible = "qcom,i2c-qup-v1.1.1"; diff --git a/arch/arm/boot/dts/qcom-msm8974-fairphone-fp2.dts b/arch/arm/boot/dts/qcom-msm8974-fairphone-fp2.dts deleted file mode 100644 index 6d77e0f8ca4d..000000000000 --- a/arch/arm/boot/dts/qcom-msm8974-fairphone-fp2.dts +++ /dev/null @@ -1,409 +0,0 @@ -#include "qcom-msm8974.dtsi" -#include "qcom-pm8841.dtsi" -#include "qcom-pm8941.dtsi" -#include <dt-bindings/gpio/gpio.h> -#include <dt-bindings/input/input.h> -#include <dt-bindings/pinctrl/qcom,pmic-gpio.h> - - -/ { - model = "Fairphone 2"; - compatible = "fairphone,fp2", "qcom,msm8974"; - - aliases { - serial0 = &blsp1_uart2; - }; - - chosen { - stdout-path = "serial0:115200n8"; - }; - - gpio-keys { - compatible = "gpio-keys"; - - pinctrl-names = "default"; - pinctrl-0 = <&gpio_keys_pin_a>; - - camera-snapshot { - label = "camera_snapshot"; - gpios = <&pm8941_gpios 1 GPIO_ACTIVE_LOW>; - linux,code = <KEY_CAMERA>; - wakeup-source; - debounce-interval = <15>; - }; - - volume-down { - label = "volume_down"; - gpios = <&pm8941_gpios 2 GPIO_ACTIVE_LOW>; - linux,code = <KEY_VOLUMEDOWN>; - wakeup-source; - debounce-interval = <15>; - }; - - volume-up { - label = "volume_up"; - gpios = <&pm8941_gpios 5 GPIO_ACTIVE_LOW>; - linux,code = <KEY_VOLUMEUP>; - wakeup-source; - debounce-interval = <15>; - }; - }; - - vibrator { - compatible = "gpio-vibrator"; - enable-gpios = <&msmgpio 86 GPIO_ACTIVE_HIGH>; - vcc-supply = <&pm8941_l18>; - }; - - smd { - rpm { - rpm_requests { - pm8841-regulators { - s1 { - regulator-min-microvolt = <675000>; - regulator-max-microvolt = <1050000>; - }; - - s2 { - regulator-min-microvolt = <500000>; - regulator-max-microvolt = <1050000>; - }; - - s3 { - regulator-min-microvolt = <1050000>; - regulator-max-microvolt = <1050000>; - }; - }; - - pm8941-regulators { - vdd_l1_l3-supply = <&pm8941_s1>; - vdd_l2_lvs1_2_3-supply = <&pm8941_s3>; - vdd_l4_l11-supply = <&pm8941_s1>; - vdd_l5_l7-supply = <&pm8941_s2>; - vdd_l6_l12_l14_l15-supply = <&pm8941_s2>; - vdd_l9_l10_l17_l22-supply = <&vreg_boost>; - vdd_l13_l20_l23_l24-supply = <&vreg_boost>; - vdd_l21-supply = <&vreg_boost>; - - s1 { - regulator-min-microvolt = <1300000>; - regulator-max-microvolt = <1300000>; - - regulator-always-on; - regulator-boot-on; - }; - - s2 { - regulator-min-microvolt = <2150000>; - regulator-max-microvolt = <2150000>; - - regulator-boot-on; - }; - - s3 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - - regulator-always-on; - regulator-boot-on; - }; - - l1 { - regulator-min-microvolt = <1225000>; - regulator-max-microvolt = <1225000>; - - regulator-always-on; - regulator-boot-on; - }; - - l2 { - regulator-min-microvolt = <1200000>; - regulator-max-microvolt = <1200000>; - }; - - l3 { - regulator-min-microvolt = <1225000>; - regulator-max-microvolt = <1225000>; - }; - - l4 { - regulator-min-microvolt = <1225000>; - regulator-max-microvolt = <1225000>; - }; - - l5 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - }; - - l6 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - - regulator-boot-on; - }; - - l7 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - - regulator-boot-on; - }; - - l8 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - }; - - l9 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <2950000>; - }; - - l10 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <2950000>; - }; - - l11 { - regulator-min-microvolt = <1225000>; - regulator-max-microvolt = <1350000>; - }; - - l12 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - - regulator-always-on; - regulator-boot-on; - }; - - l13 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <2950000>; - - regulator-boot-on; - }; - - l14 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - }; - - l15 { - regulator-min-microvolt = <2050000>; - regulator-max-microvolt = <2050000>; - }; - - l16 { - regulator-min-microvolt = <2700000>; - regulator-max-microvolt = <2700000>; - }; - - l17 { - regulator-min-microvolt = <2850000>; - regulator-max-microvolt = <2850000>; - }; - - l18 { - regulator-min-microvolt = <2850000>; - regulator-max-microvolt = <2850000>; - }; - - l19 { - regulator-min-microvolt = <2900000>; - regulator-max-microvolt = <3350000>; - }; - - l20 { - regulator-min-microvolt = <2950000>; - regulator-max-microvolt = <2950000>; - - regulator-boot-on; - regulator-system-load = <200000>; - regulator-allow-set-load; - }; - - l21 { - regulator-min-microvolt = <2950000>; - regulator-max-microvolt = <2950000>; - - regulator-boot-on; - }; - - l22 { - regulator-min-microvolt = <3000000>; - regulator-max-microvolt = <3300000>; - }; - - l23 { - regulator-min-microvolt = <3000000>; - regulator-max-microvolt = <3000000>; - }; - - l24 { - regulator-min-microvolt = <3075000>; - regulator-max-microvolt = <3075000>; - - regulator-boot-on; - }; - }; - }; - }; - }; -}; - -&soc { - serial@f991e000 { - status = "okay"; - }; - - remoteproc@fb21b000 { - status = "okay"; - - vddmx-supply = <&pm8841_s1>; - vddcx-supply = <&pm8841_s2>; - - pinctrl-names = "default"; - pinctrl-0 = <&wcnss_pin_a>; - - smd-edge { - qcom,remote-pid = <4>; - label = "pronto"; - - wcnss { - status = "okay"; - }; - }; - }; - - pinctrl@fd510000 { - sdhc1_pin_a: sdhc1-pin-active { - clk { - pins = "sdc1_clk"; - drive-strength = <16>; - bias-disable; - }; - - cmd-data { - pins = "sdc1_cmd", "sdc1_data"; - drive-strength = <10>; - bias-pull-up; - }; - }; - - sdhc2_pin_a: sdhc2-pin-active { - clk { - pins = "sdc2_clk"; - drive-strength = <10>; - bias-disable; - }; - - cmd-data { - pins = "sdc2_cmd", "sdc2_data"; - drive-strength = <6>; - bias-pull-up; - }; - }; - - wcnss_pin_a: wcnss-pin-active { - wlan { - pins = "gpio36", "gpio37", "gpio38", "gpio39", "gpio40"; - function = "wlan"; - - drive-strength = <6>; - bias-pull-down; - }; - - bt { - pins = "gpio35", "gpio43", "gpio44"; - function = "bt"; - - drive-strength = <2>; - bias-pull-down; - }; - - fm { - pins = "gpio41", "gpio42"; - function = "fm"; - - drive-strength = <2>; - bias-pull-down; - }; - }; - }; - - sdhci@f9824900 { - status = "okay"; - - vmmc-supply = <&pm8941_l20>; - vqmmc-supply = <&pm8941_s3>; - - bus-width = <8>; - non-removable; - - pinctrl-names = "default"; - pinctrl-0 = <&sdhc1_pin_a>; - }; - - sdhci@f98a4900 { - status = "okay"; - - vmmc-supply = <&pm8941_l21>; - vqmmc-supply = <&pm8941_l13>; - - bus-width = <4>; - - pinctrl-names = "default"; - pinctrl-0 = <&sdhc2_pin_a>; - }; - - usb@f9a55000 { - status = "okay"; - - phys = <&usb_hs1_phy>; - phy-select = <&tcsr 0xb000 0>; - extcon = <&smbb>, <&usb_id>; - vbus-supply = <&chg_otg>; - - hnp-disable; - srp-disable; - adp-disable; - - ulpi { - phy@a { - status = "okay"; - - v1p8-supply = <&pm8941_l6>; - v3p3-supply = <&pm8941_l24>; - - extcon = <&smbb>; - qcom,init-seq = /bits/ 8 <0x1 0x64>; - }; - }; - }; - - imem@fe805000 { - status = "okay"; - - reboot-mode { - mode-normal = <0x77665501>; - mode-bootloader = <0x77665500>; - mode-recovery = <0x77665502>; - }; - }; -}; - -&spmi_bus { - pm8941@0 { - gpios@c000 { - gpio_keys_pin_a: gpio-keys-active { - pins = "gpio1", "gpio2", "gpio5"; - function = "normal"; - - bias-pull-up; - power-source = <PM8941_GPIO_S3>; - }; - }; - }; -}; diff --git a/arch/arm/boot/dts/qcom-msm8974-lge-nexus5-hammerhead.dts b/arch/arm/boot/dts/qcom-msm8974-lge-nexus5-hammerhead.dts index 069136170198..9493886a5c0d 100644 --- a/arch/arm/boot/dts/qcom-msm8974-lge-nexus5-hammerhead.dts +++ b/arch/arm/boot/dts/qcom-msm8974-lge-nexus5-hammerhead.dts @@ -2,7 +2,6 @@ #include "qcom-msm8974.dtsi" #include "qcom-pm8841.dtsi" #include "qcom-pm8941.dtsi" -#include <dt-bindings/gpio/gpio.h> #include <dt-bindings/input/input.h> #include <dt-bindings/pinctrl/qcom,pmic-gpio.h> @@ -12,213 +11,31 @@ aliases { serial0 = &blsp1_uart1; - serial1 = &blsp2_uart10; + serial1 = &blsp2_uart4; }; chosen { stdout-path = "serial0:115200n8"; }; - smd { - rpm { - rpm_requests { - pm8841-regulators { - s1 { - regulator-min-microvolt = <675000>; - regulator-max-microvolt = <1050000>; - }; - - s2 { - regulator-min-microvolt = <500000>; - regulator-max-microvolt = <1050000>; - }; - - s3 { - regulator-min-microvolt = <1050000>; - regulator-max-microvolt = <1050000>; - }; - - s4 { - regulator-min-microvolt = <815000>; - regulator-max-microvolt = <900000>; - }; - }; - - pm8941-regulators { - vdd_l1_l3-supply = <&pm8941_s1>; - vdd_l2_lvs1_2_3-supply = <&pm8941_s3>; - vdd_l4_l11-supply = <&pm8941_s1>; - vdd_l5_l7-supply = <&pm8941_s2>; - vdd_l6_l12_l14_l15-supply = <&pm8941_s2>; - vdd_l8_l16_l18_l19-supply = <&vreg_vph_pwr>; - vdd_l9_l10_l17_l22-supply = <&vreg_boost>; - vdd_l13_l20_l23_l24-supply = <&vreg_boost>; - vdd_l21-supply = <&vreg_boost>; - - s1 { - regulator-min-microvolt = <1300000>; - regulator-max-microvolt = <1300000>; - - regulator-always-on; - regulator-boot-on; - }; - - s2 { - regulator-min-microvolt = <2150000>; - regulator-max-microvolt = <2150000>; - - regulator-boot-on; - }; - - s3 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - - regulator-always-on; - regulator-boot-on; - }; - - l1 { - regulator-min-microvolt = <1225000>; - regulator-max-microvolt = <1225000>; - - regulator-always-on; - regulator-boot-on; - }; - - l2 { - regulator-min-microvolt = <1200000>; - regulator-max-microvolt = <1200000>; - }; - - l3 { - regulator-min-microvolt = <1225000>; - regulator-max-microvolt = <1225000>; - }; - - l4 { - regulator-min-microvolt = <1225000>; - regulator-max-microvolt = <1225000>; - }; - - l5 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - }; - - l6 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - - regulator-boot-on; - }; - - l7 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - - regulator-boot-on; - }; - - l8 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - }; - - l9 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <2950000>; - }; - - l10 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <2950000>; - }; - - l11 { - regulator-min-microvolt = <1300000>; - regulator-max-microvolt = <1300000>; - }; - - l12 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - - regulator-always-on; - regulator-boot-on; - }; - - l13 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <2950000>; - - regulator-boot-on; - }; - - l14 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - }; - - l15 { - regulator-min-microvolt = <2050000>; - regulator-max-microvolt = <2050000>; - }; - - l16 { - regulator-min-microvolt = <2700000>; - regulator-max-microvolt = <2700000>; - }; - - l17 { - regulator-min-microvolt = <2850000>; - regulator-max-microvolt = <2850000>; - }; - - l18 { - regulator-min-microvolt = <2850000>; - regulator-max-microvolt = <2850000>; - }; - - l19 { - regulator-min-microvolt = <3000000>; - regulator-max-microvolt = <3300000>; - }; - - l20 { - regulator-min-microvolt = <2950000>; - regulator-max-microvolt = <2950000>; - - regulator-boot-on; - regulator-system-load = <200000>; - regulator-allow-set-load; - }; - - l21 { - regulator-min-microvolt = <2950000>; - regulator-max-microvolt = <2950000>; - - regulator-boot-on; - }; - - l22 { - regulator-min-microvolt = <3000000>; - regulator-max-microvolt = <3300000>; - }; - - l23 { - regulator-min-microvolt = <3000000>; - regulator-max-microvolt = <3000000>; - }; - - l24 { - regulator-min-microvolt = <3075000>; - regulator-max-microvolt = <3075000>; - - regulator-boot-on; - }; - }; - }; + gpio-keys { + compatible = "gpio-keys"; + + pinctrl-names = "default"; + pinctrl-0 = <&gpio_keys_pin_a>; + + volume-up { + label = "volume_up"; + gpios = <&pm8941_gpios 2 GPIO_ACTIVE_LOW>; + linux,input-type = <1>; + linux,code = <KEY_VOLUMEUP>; + }; + + volume-down { + label = "volume_down"; + gpios = <&pm8941_gpios 3 GPIO_ACTIVE_LOW>; + linux,input-type = <1>; + linux,code = <KEY_VOLUMEDOWN>; }; }; @@ -229,7 +46,7 @@ regulator-min-microvolt = <3300000>; regulator-max-microvolt = <3300000>; - gpio = <&msmgpio 26 GPIO_ACTIVE_HIGH>; + gpio = <&tlmm 26 GPIO_ACTIVE_HIGH>; enable-active-high; pinctrl-names = "default"; @@ -237,525 +54,570 @@ }; }; -&soc { - serial@f991d000 { - status = "okay"; +&blsp1_i2c1 { + status = "okay"; + clock-frequency = <100000>; + + charger: bq24192@6b { + compatible = "ti,bq24192"; + reg = <0x6b>; + interrupts-extended = <&spmi_bus 0 0xd5 0 IRQ_TYPE_EDGE_FALLING>; + + omit-battery-class; + + usb_otg_vbus: usb-otg-vbus { }; }; - pinctrl@fd510000 { - sdhc1_pin_a: sdhc1-pin-active { - clk { - pins = "sdc1_clk"; - drive-strength = <16>; - bias-disable; - }; + fuelgauge: max17048@36 { + compatible = "maxim,max17048"; + reg = <0x36>; - cmd-data { - pins = "sdc1_cmd", "sdc1_data"; - drive-strength = <10>; - bias-pull-up; - }; - }; + maxim,double-soc; + maxim,rcomp = /bits/ 8 <0x4d>; - sdhc2_pin_a: sdhc2-pin-active { - clk { - pins = "sdc2_clk"; - drive-strength = <6>; - bias-disable; - }; + interrupt-parent = <&tlmm>; + interrupts = <9 IRQ_TYPE_LEVEL_LOW>; - cmd-data { - pins = "sdc2_cmd", "sdc2_data"; - drive-strength = <6>; - bias-pull-up; - }; - }; + pinctrl-names = "default"; + pinctrl-0 = <&fuelgauge_pin>; - i2c1_pins: i2c1 { - mux { - pins = "gpio2", "gpio3"; - function = "blsp_i2c1"; + maxim,alert-low-soc-level = <2>; + }; +}; - drive-strength = <2>; - bias-disable; - }; - }; +&blsp1_i2c2 { + status = "okay"; + clock-frequency = <355000>; - i2c2_pins: i2c2 { - mux { - pins = "gpio6", "gpio7"; - function = "blsp_i2c2"; + synaptics@70 { + compatible = "syna,rmi4-i2c"; + reg = <0x70>; - drive-strength = <2>; - bias-disable; - }; - }; + interrupts-extended = <&tlmm 5 IRQ_TYPE_EDGE_FALLING>; + vdd-supply = <&pm8941_l22>; + vio-supply = <&pm8941_lvs3>; - i2c3_pins: i2c3 { - mux { - pins = "gpio10", "gpio11"; - function = "blsp_i2c3"; - drive-strength = <2>; - bias-disable; - }; - }; + pinctrl-names = "default"; + pinctrl-0 = <&touch_pin>; - i2c11_pins: i2c11 { - mux { - pins = "gpio83", "gpio84"; - function = "blsp_i2c11"; + #address-cells = <1>; + #size-cells = <0>; - drive-strength = <2>; - bias-disable; - }; + rmi4-f01@1 { + reg = <0x1>; + syna,nosleep-mode = <1>; }; - i2c12_pins: i2c12 { - mux { - pins = "gpio87", "gpio88"; - function = "blsp_i2c12"; - drive-strength = <2>; - bias-disable; - }; + rmi4-f12@12 { + reg = <0x12>; + syna,sensor-type = <1>; }; + }; +}; - mpu6515_pin: mpu6515 { - irq { - pins = "gpio73"; - function = "gpio"; - bias-disable; - input-enable; - }; - }; +&blsp1_i2c3 { + status = "okay"; + clock-frequency = <100000>; + + avago_apds993@39 { + compatible = "avago,apds9930"; + reg = <0x39>; + interrupts-extended = <&tlmm 61 IRQ_TYPE_EDGE_FALLING>; + vdd-supply = <&pm8941_l17>; + vddio-supply = <&pm8941_lvs1>; + led-max-microamp = <100000>; + amstaos,proximity-diodes = <0>; + }; +}; - touch_pin: touch { - int { - pins = "gpio5"; - function = "gpio"; +&blsp2_i2c5 { + status = "okay"; + clock-frequency = <355000>; - drive-strength = <2>; - bias-disable; - input-enable; - }; + led-controller@38 { + compatible = "ti,lm3630a"; + status = "okay"; + reg = <0x38>; - reset { - pins = "gpio8"; - function = "gpio"; + #address-cells = <1>; + #size-cells = <0>; - drive-strength = <2>; - bias-pull-up; - }; + led@0 { + reg = <0>; + led-sources = <0 1>; + label = "lcd-backlight"; + default-brightness = <200>; }; + }; +}; - panel_pin: panel { - te { - pins = "gpio12"; - function = "mdp_vsync"; +&blsp2_i2c6 { + status = "okay"; + clock-frequency = <100000>; - drive-strength = <2>; - bias-disable; - }; - }; + mpu6515@68 { + compatible = "invensense,mpu6515"; + reg = <0x68>; + interrupts-extended = <&tlmm 73 IRQ_TYPE_EDGE_FALLING>; + vddio-supply = <&pm8941_lvs1>; - bt_pin: bt { - hostwake { - pins = "gpio42"; - function = "gpio"; - }; + pinctrl-names = "default"; + pinctrl-0 = <&mpu6515_pin>; + + mount-matrix = "0", "-1", "0", + "-1", "0", "0", + "0", "0", "1"; - devwake { - pins = "gpio62"; - function = "gpio"; + i2c-gate { + #address-cells = <1>; + #size-cells = <0>; + ak8963@f { + compatible = "asahi-kasei,ak8963"; + reg = <0x0f>; + gpios = <&tlmm 67 0>; + vid-supply = <&pm8941_lvs1>; + vdd-supply = <&pm8941_l17>; }; - shutdown { - pins = "gpio41"; - function = "gpio"; + bmp280@76 { + compatible = "bosch,bmp280"; + reg = <0x76>; + vdda-supply = <&pm8941_lvs1>; + vddd-supply = <&pm8941_l17>; }; }; + }; +}; - blsp2_uart10_pin_a: blsp2-uart10-pin-active { - tx { - pins = "gpio53"; - function = "blsp_uart10"; +&blsp1_uart1 { + status = "okay"; +}; - drive-strength = <2>; - bias-disable; - }; +&blsp2_uart4 { + status = "okay"; - rx { - pins = "gpio54"; - function = "blsp_uart10"; + bluetooth { + compatible = "brcm,bcm43438-bt"; + max-speed = <3000000>; - drive-strength = <2>; - bias-pull-up; - }; + pinctrl-names = "default"; + pinctrl-0 = <&bt_pin>; + + host-wakeup-gpios = <&tlmm 42 GPIO_ACTIVE_HIGH>; + device-wakeup-gpios = <&tlmm 62 GPIO_ACTIVE_HIGH>; + shutdown-gpios = <&tlmm 41 GPIO_ACTIVE_HIGH>; + }; +}; - cts { - pins = "gpio55"; - function = "blsp_uart10"; +&dsi0 { + status = "okay"; - drive-strength = <2>; - bias-pull-up; - }; + vdda-supply = <&pm8941_l2>; + vdd-supply = <&pm8941_lvs3>; + vddio-supply = <&pm8941_l12>; - rts { - pins = "gpio56"; - function = "blsp_uart10"; + panel: panel@0 { + reg = <0>; + compatible = "lg,acx467akm-7"; - drive-strength = <2>; - bias-disable; + pinctrl-names = "default"; + pinctrl-0 = <&panel_pin>; + + port { + panel_in: endpoint { + remote-endpoint = <&dsi0_out>; }; }; }; +}; - sdhci@f9824900 { - status = "okay"; +&dsi0_out { + remote-endpoint = <&panel_in>; + data-lanes = <0 1 2 3>; +}; - vmmc-supply = <&pm8941_l20>; - vqmmc-supply = <&pm8941_s3>; +&dsi0_phy { + status = "okay"; - bus-width = <8>; - non-removable; + vddio-supply = <&pm8941_l12>; +}; - pinctrl-names = "default"; - pinctrl-0 = <&sdhc1_pin_a>; - }; +&mdss { + status = "okay"; +}; - sdhci@f98a4900 { - status = "okay"; +&otg { + status = "okay"; - max-frequency = <100000000>; - bus-width = <4>; - non-removable; - vmmc-supply = <&vreg_wlan>; - vqmmc-supply = <&pm8941_s3>; + phys = <&usb_hs1_phy>; + phy-select = <&tcsr 0xb000 0>; - pinctrl-names = "default"; - pinctrl-0 = <&sdhc2_pin_a>; + extcon = <&charger>, <&usb_id>; + vbus-supply = <&usb_otg_vbus>; - #address-cells = <1>; - #size-cells = <0>; + hnp-disable; + srp-disable; + adp-disable; - bcrmf@1 { - compatible = "brcm,bcm4339-fmac", "brcm,bcm4329-fmac"; - reg = <1>; + ulpi { + phy@a { + status = "okay"; - brcm,drive-strength = <10>; + v1p8-supply = <&pm8941_l6>; + v3p3-supply = <&pm8941_l24>; - pinctrl-names = "default"; - pinctrl-0 = <&wlan_sleep_clk_pin>; + qcom,init-seq = /bits/ 8 <0x1 0x64>; }; }; +}; - gpio-keys { - compatible = "gpio-keys"; +&pm8941_gpios { + gpio_keys_pin_a: gpio-keys-active { + pins = "gpio2", "gpio3"; + function = "normal"; - pinctrl-names = "default"; - pinctrl-0 = <&gpio_keys_pin_a>; + bias-pull-up; + power-source = <PM8941_GPIO_S3>; + }; - volume-up { - label = "volume_up"; - gpios = <&pm8941_gpios 2 GPIO_ACTIVE_LOW>; - linux,input-type = <1>; - linux,code = <KEY_VOLUMEUP>; - }; + fuelgauge_pin: fuelgauge-int { + pins = "gpio9"; + function = "normal"; - volume-down { - label = "volume_down"; - gpios = <&pm8941_gpios 3 GPIO_ACTIVE_LOW>; - linux,input-type = <1>; - linux,code = <KEY_VOLUMEDOWN>; - }; + bias-disable; + input-enable; + power-source = <PM8941_GPIO_S3>; }; - serial@f9960000 { - status = "okay"; + wlan_sleep_clk_pin: wl-sleep-clk { + pins = "gpio16"; + function = "func2"; - pinctrl-names = "default"; - pinctrl-0 = <&blsp2_uart10_pin_a>; + output-high; + power-source = <PM8941_GPIO_S3>; + }; - bluetooth { - compatible = "brcm,bcm43438-bt"; - max-speed = <3000000>; + wlan_regulator_pin: wl-reg-active { + pins = "gpio17"; + function = "normal"; - pinctrl-names = "default"; - pinctrl-0 = <&bt_pin>; + bias-disable; + power-source = <PM8941_GPIO_S3>; + }; - host-wakeup-gpios = <&msmgpio 42 GPIO_ACTIVE_HIGH>; - device-wakeup-gpios = <&msmgpio 62 GPIO_ACTIVE_HIGH>; - shutdown-gpios = <&msmgpio 41 GPIO_ACTIVE_HIGH>; - }; + otg { + gpio-hog; + gpios = <35 GPIO_ACTIVE_HIGH>; + output-high; + line-name = "otg-gpio"; }; +}; - i2c@f9967000 { - status = "okay"; - pinctrl-names = "default"; - pinctrl-0 = <&i2c11_pins>; - clock-frequency = <355000>; - qcom,src-freq = <50000000>; +&rpm_requests { + pm8841-regulators { + compatible = "qcom,rpm-pm8841-regulators"; - led-controller@38 { - compatible = "ti,lm3630a"; - status = "okay"; - reg = <0x38>; + pm8841_s1: s1 { + regulator-min-microvolt = <675000>; + regulator-max-microvolt = <1050000>; + }; - #address-cells = <1>; - #size-cells = <0>; + pm8841_s2: s2 { + regulator-min-microvolt = <500000>; + regulator-max-microvolt = <1050000>; + }; - led@0 { - reg = <0>; - led-sources = <0 1>; - label = "lcd-backlight"; - default-brightness = <200>; - }; + pm8841_s3: s3 { + regulator-min-microvolt = <1050000>; + regulator-max-microvolt = <1050000>; }; - }; - i2c@f9968000 { - status = "okay"; - pinctrl-names = "default"; - pinctrl-0 = <&i2c12_pins>; - clock-frequency = <100000>; - qcom,src-freq = <50000000>; - - mpu6515@68 { - compatible = "invensense,mpu6515"; - reg = <0x68>; - interrupts-extended = <&msmgpio 73 IRQ_TYPE_EDGE_FALLING>; - vddio-supply = <&pm8941_lvs1>; - - pinctrl-names = "default"; - pinctrl-0 = <&mpu6515_pin>; - - mount-matrix = "0", "-1", "0", - "-1", "0", "0", - "0", "0", "1"; - - i2c-gate { - #address-cells = <1>; - #size-cells = <0>; - ak8963@f { - compatible = "asahi-kasei,ak8963"; - reg = <0x0f>; - gpios = <&msmgpio 67 0>; - vid-supply = <&pm8941_lvs1>; - vdd-supply = <&pm8941_l17>; - }; - - bmp280@76 { - compatible = "bosch,bmp280"; - reg = <0x76>; - vdda-supply = <&pm8941_lvs1>; - vddd-supply = <&pm8941_l17>; - }; - }; + pm8841_s4: s4 { + regulator-min-microvolt = <815000>; + regulator-max-microvolt = <900000>; }; }; - i2c@f9923000 { - status = "okay"; - pinctrl-names = "default"; - pinctrl-0 = <&i2c1_pins>; - clock-frequency = <100000>; - qcom,src-freq = <50000000>; + pm8941-regulators { + compatible = "qcom,rpm-pm8941-regulators"; + + vdd_l1_l3-supply = <&pm8941_s1>; + vdd_l2_lvs1_2_3-supply = <&pm8941_s3>; + vdd_l4_l11-supply = <&pm8941_s1>; + vdd_l5_l7-supply = <&pm8941_s2>; + vdd_l6_l12_l14_l15-supply = <&pm8941_s2>; + vdd_l8_l16_l18_l19-supply = <&vreg_vph_pwr>; + vdd_l9_l10_l17_l22-supply = <&vreg_boost>; + vdd_l13_l20_l23_l24-supply = <&vreg_boost>; + vdd_l21-supply = <&vreg_boost>; + + pm8941_s1: s1 { + regulator-min-microvolt = <1300000>; + regulator-max-microvolt = <1300000>; + regulator-always-on; + regulator-boot-on; + }; - charger: bq24192@6b { - compatible = "ti,bq24192"; - reg = <0x6b>; - interrupts-extended = <&spmi_bus 0 0xd5 0 IRQ_TYPE_EDGE_FALLING>; + pm8941_s2: s2 { + regulator-min-microvolt = <2150000>; + regulator-max-microvolt = <2150000>; + regulator-boot-on; + }; - omit-battery-class; + pm8941_s3: s3 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + regulator-boot-on; + }; - usb_otg_vbus: usb-otg-vbus { }; + pm8941_l1: l1 { + regulator-min-microvolt = <1225000>; + regulator-max-microvolt = <1225000>; + regulator-always-on; + regulator-boot-on; }; - fuelgauge: max17048@36 { - compatible = "maxim,max17048"; - reg = <0x36>; + pm8941_l2: l2 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + }; - maxim,double-soc; - maxim,rcomp = /bits/ 8 <0x4d>; + pm8941_l3: l3 { + regulator-min-microvolt = <1225000>; + regulator-max-microvolt = <1225000>; + }; - interrupt-parent = <&msmgpio>; - interrupts = <9 IRQ_TYPE_LEVEL_LOW>; + pm8941_l4: l4 { + regulator-min-microvolt = <1225000>; + regulator-max-microvolt = <1225000>; + }; - pinctrl-names = "default"; - pinctrl-0 = <&fuelgauge_pin>; + pm8941_l5: l5 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; - maxim,alert-low-soc-level = <2>; + pm8941_l6: l6 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-boot-on; }; - }; - i2c@f9924000 { - status = "okay"; + pm8941_l7: l7 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-boot-on; + }; - clock-frequency = <355000>; - qcom,src-freq = <50000000>; + pm8941_l8: l8 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; - pinctrl-names = "default"; - pinctrl-0 = <&i2c2_pins>; + pm8941_l9: l9 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <2950000>; + }; - synaptics@70 { - compatible = "syna,rmi4-i2c"; - reg = <0x70>; + pm8941_l10: l10 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <2950000>; + }; - interrupts-extended = <&msmgpio 5 IRQ_TYPE_EDGE_FALLING>; - vdd-supply = <&pm8941_l22>; - vio-supply = <&pm8941_lvs3>; + pm8941_l11: l11 { + regulator-min-microvolt = <1300000>; + regulator-max-microvolt = <1300000>; + }; - pinctrl-names = "default"; - pinctrl-0 = <&touch_pin>; + pm8941_l12: l12 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + regulator-boot-on; + }; - #address-cells = <1>; - #size-cells = <0>; + pm8941_l13: l13 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <2950000>; + regulator-boot-on; + }; - rmi4-f01@1 { - reg = <0x1>; - syna,nosleep-mode = <1>; - }; + pm8941_l14: l14 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; - rmi4-f12@12 { - reg = <0x12>; - syna,sensor-type = <1>; - }; + pm8941_l15: l15 { + regulator-min-microvolt = <2050000>; + regulator-max-microvolt = <2050000>; }; - }; - i2c@f9925000 { - status = "okay"; - pinctrl-names = "default"; - pinctrl-0 = <&i2c3_pins>; - clock-frequency = <100000>; - qcom,src-freq = <50000000>; - - avago_apds993@39 { - compatible = "avago,apds9930"; - reg = <0x39>; - interrupts-extended = <&msmgpio 61 IRQ_TYPE_EDGE_FALLING>; - vdd-supply = <&pm8941_l17>; - vddio-supply = <&pm8941_lvs1>; - led-max-microamp = <100000>; - amstaos,proximity-diodes = <0>; + pm8941_l16: l16 { + regulator-min-microvolt = <2700000>; + regulator-max-microvolt = <2700000>; }; - }; - usb@f9a55000 { - status = "okay"; + pm8941_l17: l17 { + regulator-min-microvolt = <2850000>; + regulator-max-microvolt = <2850000>; + }; + + pm8941_l18: l18 { + regulator-min-microvolt = <2850000>; + regulator-max-microvolt = <2850000>; + }; - phys = <&usb_hs1_phy>; - phy-select = <&tcsr 0xb000 0>; + pm8941_l19: l19 { + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3300000>; + }; - extcon = <&charger>, <&usb_id>; - vbus-supply = <&usb_otg_vbus>; + pm8941_l20: l20 { + regulator-min-microvolt = <2950000>; + regulator-max-microvolt = <2950000>; + regulator-system-load = <200000>; + regulator-allow-set-load; + regulator-boot-on; + }; - hnp-disable; - srp-disable; - adp-disable; + pm8941_l21: l21 { + regulator-min-microvolt = <2950000>; + regulator-max-microvolt = <2950000>; + regulator-boot-on; + }; - ulpi { - phy@a { - status = "okay"; + pm8941_l22: l22 { + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3300000>; + }; - v1p8-supply = <&pm8941_l6>; - v3p3-supply = <&pm8941_l24>; + pm8941_l23: l23 { + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + }; - qcom,init-seq = /bits/ 8 <0x1 0x64>; - }; + pm8941_l24: l24 { + regulator-min-microvolt = <3075000>; + regulator-max-microvolt = <3075000>; + regulator-boot-on; }; + + pm8941_lvs1: lvs1 {}; + pm8941_lvs3: lvs3 {}; }; +}; - mdss@fd900000 { - status = "okay"; +&sdhc_1 { + status = "okay"; - mdp@fd900000 { - status = "okay"; - }; + vmmc-supply = <&pm8941_l20>; + vqmmc-supply = <&pm8941_s3>; - dsi@fd922800 { - status = "okay"; + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&sdc1_on>; + pinctrl-1 = <&sdc1_off>; +}; - vdda-supply = <&pm8941_l2>; - vdd-supply = <&pm8941_lvs3>; - vddio-supply = <&pm8941_l12>; +&sdhc_2 { + status = "okay"; - #address-cells = <1>; - #size-cells = <0>; + max-frequency = <100000000>; + vmmc-supply = <&vreg_wlan>; + vqmmc-supply = <&pm8941_s3>; + non-removable; - ports { - port@1 { - endpoint { - remote-endpoint = <&panel_in>; - data-lanes = <0 1 2 3>; - }; - }; - }; + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&sdc2_on>; + pinctrl-1 = <&sdc2_off>; - panel: panel@0 { - reg = <0>; - compatible = "lg,acx467akm-7"; + bcrmf@1 { + compatible = "brcm,bcm4339-fmac", "brcm,bcm4329-fmac"; + reg = <1>; - pinctrl-names = "default"; - pinctrl-0 = <&panel_pin>; + brcm,drive-strength = <10>; - port { - panel_in: endpoint { - remote-endpoint = <&dsi0_out>; - }; - }; - }; + pinctrl-names = "default"; + pinctrl-0 = <&wlan_sleep_clk_pin>; + }; +}; + +&tlmm { + sdc1_on: sdc1-on { + clk { + pins = "sdc1_clk"; + drive-strength = <16>; + bias-disable; }; - dsi-phy@fd922a00 { - status = "okay"; + cmd-data { + pins = "sdc1_cmd", "sdc1_data"; + drive-strength = <10>; + bias-pull-up; + }; + }; - vddio-supply = <&pm8941_l12>; + sdc2_on: sdc2-on { + clk { + pins = "sdc2_clk"; + drive-strength = <6>; + bias-disable; + }; + + cmd-data { + pins = "sdc2_cmd", "sdc2_data"; + drive-strength = <6>; + bias-pull-up; }; }; -}; -&spmi_bus { - pm8941@0 { - gpios@c000 { - gpio_keys_pin_a: gpio-keys-active { - pins = "gpio2", "gpio3"; - function = "normal"; + mpu6515_pin: mpu6515 { + pins = "gpio73"; + function = "gpio"; + bias-disable; + input-enable; + }; - bias-pull-up; - power-source = <PM8941_GPIO_S3>; - }; + touch_pin: touch { + int { + pins = "gpio5"; + function = "gpio"; - fuelgauge_pin: fuelgauge-int { - pins = "gpio9"; - function = "normal"; + drive-strength = <2>; + bias-disable; + input-enable; + }; - bias-disable; - input-enable; - power-source = <PM8941_GPIO_S3>; - }; + reset { + pins = "gpio8"; + function = "gpio"; - wlan_sleep_clk_pin: wl-sleep-clk { - pins = "gpio16"; - function = "func2"; + drive-strength = <2>; + bias-pull-up; + }; + }; - output-high; - power-source = <PM8941_GPIO_S3>; - }; + panel_pin: panel { + pins = "gpio12"; + function = "mdp_vsync"; + drive-strength = <2>; + bias-disable; + }; - wlan_regulator_pin: wl-reg-active { - pins = "gpio17"; - function = "normal"; + bt_pin: bt { + hostwake { + pins = "gpio42"; + function = "gpio"; + }; - bias-disable; - power-source = <PM8941_GPIO_S3>; - }; + devwake { + pins = "gpio62"; + function = "gpio"; + }; - otg { - gpio-hog; - gpios = <35 GPIO_ACTIVE_HIGH>; - output-high; - line-name = "otg-gpio"; - }; + shutdown { + pins = "gpio41"; + function = "gpio"; }; }; }; diff --git a/arch/arm/boot/dts/qcom-msm8974-samsung-klte.dts b/arch/arm/boot/dts/qcom-msm8974-samsung-klte.dts deleted file mode 100644 index 96e1c978b878..000000000000 --- a/arch/arm/boot/dts/qcom-msm8974-samsung-klte.dts +++ /dev/null @@ -1,908 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0 -#include "qcom-msm8974pro.dtsi" -#include "qcom-pma8084.dtsi" -#include <dt-bindings/gpio/gpio.h> -#include <dt-bindings/input/input.h> -#include <dt-bindings/pinctrl/qcom,pmic-gpio.h> -#include <dt-bindings/leds/common.h> - -/ { - model = "Samsung Galaxy S5"; - compatible = "samsung,klte", "qcom,msm8974"; - - aliases { - serial0 = &blsp1_uart1; - mmc0 = &sdhc_1; /* SDC1 eMMC slot */ - mmc1 = &sdhc_2; /* SDC2 SD card slot */ - }; - - chosen { - stdout-path = "serial0:115200n8"; - }; - - smd { - rpm { - rpm_requests { - pma8084-regulators { - compatible = "qcom,rpm-pma8084-regulators"; - status = "okay"; - - pma8084_s1: s1 { - regulator-min-microvolt = <675000>; - regulator-max-microvolt = <1050000>; - regulator-always-on; - }; - - pma8084_s2: s2 { - regulator-min-microvolt = <500000>; - regulator-max-microvolt = <1050000>; - }; - - pma8084_s3: s3 { - regulator-min-microvolt = <1300000>; - regulator-max-microvolt = <1300000>; - }; - - pma8084_s4: s4 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - }; - - pma8084_s5: s5 { - regulator-min-microvolt = <2150000>; - regulator-max-microvolt = <2150000>; - }; - - pma8084_s6: s6 { - regulator-min-microvolt = <1050000>; - regulator-max-microvolt = <1050000>; - }; - - pma8084_l1: l1 { - regulator-min-microvolt = <1225000>; - regulator-max-microvolt = <1225000>; - }; - - pma8084_l2: l2 { - regulator-min-microvolt = <1200000>; - regulator-max-microvolt = <1200000>; - }; - - pma8084_l3: l3 { - regulator-min-microvolt = <1050000>; - regulator-max-microvolt = <1200000>; - }; - - pma8084_l4: l4 { - regulator-min-microvolt = <1200000>; - regulator-max-microvolt = <1225000>; - }; - - pma8084_l5: l5 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - }; - - pma8084_l6: l6 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - }; - - pma8084_l7: l7 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - }; - - pma8084_l8: l8 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - }; - - pma8084_l9: l9 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <2950000>; - }; - - pma8084_l10: l10 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <2950000>; - }; - - pma8084_l11: l11 { - regulator-min-microvolt = <1300000>; - regulator-max-microvolt = <1300000>; - }; - - pma8084_l12: l12 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - regulator-always-on; - }; - - pma8084_l13: l13 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <2950000>; - }; - - pma8084_l14: l14 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - }; - - pma8084_l15: l15 { - regulator-min-microvolt = <2050000>; - regulator-max-microvolt = <2050000>; - }; - - pma8084_l16: l16 { - regulator-min-microvolt = <2700000>; - regulator-max-microvolt = <2700000>; - }; - - pma8084_l17: l17 { - regulator-min-microvolt = <2850000>; - regulator-max-microvolt = <2850000>; - }; - - pma8084_l18: l18 { - regulator-min-microvolt = <2850000>; - regulator-max-microvolt = <2850000>; - }; - - pma8084_l19: l19 { - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - }; - - pma8084_l20: l20 { - regulator-min-microvolt = <2950000>; - regulator-max-microvolt = <2950000>; - - regulator-allow-set-load; - regulator-system-load = <200000>; - }; - - pma8084_l21: l21 { - regulator-min-microvolt = <2950000>; - regulator-max-microvolt = <2950000>; - - regulator-allow-set-load; - regulator-system-load = <200000>; - }; - - pma8084_l22: l22 { - regulator-min-microvolt = <3000000>; - regulator-max-microvolt = <3300000>; - }; - - pma8084_l23: l23 { - regulator-min-microvolt = <3000000>; - regulator-max-microvolt = <3000000>; - }; - - pma8084_l24: l24 { - regulator-min-microvolt = <3075000>; - regulator-max-microvolt = <3075000>; - }; - - pma8084_l25: l25 { - regulator-min-microvolt = <2100000>; - regulator-max-microvolt = <2100000>; - }; - - pma8084_l26: l26 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <2050000>; - }; - - pma8084_l27: l27 { - regulator-min-microvolt = <1000000>; - regulator-max-microvolt = <1225000>; - }; - - pma8084_lvs1: lvs1 {}; - pma8084_lvs2: lvs2 {}; - pma8084_lvs3: lvs3 {}; - pma8084_lvs4: lvs4 {}; - - pma8084_5vs1: 5vs1 {}; - }; - }; - }; - }; - - i2c-gpio-touchkey { - compatible = "i2c-gpio"; - #address-cells = <1>; - #size-cells = <0>; - sda-gpios = <&msmgpio 95 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; - scl-gpios = <&msmgpio 96 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; - pinctrl-names = "default"; - pinctrl-0 = <&i2c_touchkey_pins>; - - touchkey@20 { - compatible = "cypress,tm2-touchkey"; - reg = <0x20>; - - interrupt-parent = <&pma8084_gpios>; - interrupts = <6 IRQ_TYPE_EDGE_FALLING>; - pinctrl-names = "default"; - pinctrl-0 = <&touchkey_pin>; - - vcc-supply = <&max77826_ldo15>; - vdd-supply = <&pma8084_l19>; - - linux,keycodes = <KEY_APPSELECT KEY_BACK>; - }; - }; - - i2c-gpio-led { - compatible = "i2c-gpio"; - #address-cells = <1>; - #size-cells = <0>; - scl-gpios = <&msmgpio 121 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; - sda-gpios = <&msmgpio 120 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; - pinctrl-names = "default"; - pinctrl-0 = <&i2c_led_gpioex_pins>; - - i2c-gpio,delay-us = <2>; - - gpio_expander: gpio@20 { - compatible = "nxp,pcal6416"; - reg = <0x20>; - - gpio-controller; - #gpio-cells = <2>; - - vcc-supply = <&pma8084_s4>; - - pinctrl-names = "default"; - pinctrl-0 = <&gpioex_pin>; - - reset-gpios = <&msmgpio 145 GPIO_ACTIVE_LOW>; - }; - - led-controller@30 { - compatible = "panasonic,an30259a"; - reg = <0x30>; - - #address-cells = <1>; - #size-cells = <0>; - - led@1 { - reg = <1>; - function = LED_FUNCTION_STATUS; - color = <LED_COLOR_ID_RED>; - }; - - led@2 { - reg = <2>; - function = LED_FUNCTION_STATUS; - color = <LED_COLOR_ID_GREEN>; - }; - - led@3 { - reg = <3>; - function = LED_FUNCTION_STATUS; - color = <LED_COLOR_ID_BLUE>; - }; - }; - }; - - vreg_wlan: wlan-regulator { - compatible = "regulator-fixed"; - - regulator-name = "wl-reg"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - - gpio = <&gpio_expander 8 GPIO_ACTIVE_HIGH>; - enable-active-high; - }; - - vreg_panel: panel-regulator { - compatible = "regulator-fixed"; - - pinctrl-names = "default"; - pinctrl-0 = <&panel_en_pin>; - - regulator-name = "panel-vddr-reg"; - regulator-min-microvolt = <1500000>; - regulator-max-microvolt = <1500000>; - - gpio = <&pma8084_gpios 14 GPIO_ACTIVE_HIGH>; - enable-active-high; - }; - - /delete-node/ vreg-boost; - - adsp-pil { - cx-supply = <&pma8084_s2>; - }; -}; - -&soc { - serial@f991e000 { - status = "okay"; - }; - - /* blsp2_uart8 */ - serial@f995e000 { - status = "okay"; - - pinctrl-names = "default", "sleep"; - pinctrl-0 = <&blsp2_uart8_pins_active>; - pinctrl-1 = <&blsp2_uart8_pins_sleep>; - - bluetooth { - compatible = "brcm,bcm43540-bt"; - max-speed = <3000000>; - pinctrl-names = "default"; - pinctrl-0 = <&bt_pins>; - device-wakeup-gpios = <&msmgpio 91 GPIO_ACTIVE_HIGH>; - shutdown-gpios = <&gpio_expander 9 GPIO_ACTIVE_HIGH>; - interrupt-parent = <&msmgpio>; - interrupts = <75 IRQ_TYPE_LEVEL_HIGH>; - interrupt-names = "host-wakeup"; - }; - }; - - gpio-keys { - compatible = "gpio-keys"; - - pinctrl-names = "default"; - pinctrl-0 = <&gpio_keys_pin_a>; - - volume-down { - label = "volume_down"; - gpios = <&pma8084_gpios 2 GPIO_ACTIVE_LOW>; - linux,input-type = <1>; - linux,code = <KEY_VOLUMEDOWN>; - debounce-interval = <15>; - }; - - home-key { - label = "home_key"; - gpios = <&pma8084_gpios 3 GPIO_ACTIVE_LOW>; - linux,input-type = <1>; - linux,code = <KEY_HOMEPAGE>; - wakeup-source; - debounce-interval = <15>; - }; - - volume-up { - label = "volume_up"; - gpios = <&pma8084_gpios 5 GPIO_ACTIVE_LOW>; - linux,input-type = <1>; - linux,code = <KEY_VOLUMEUP>; - debounce-interval = <15>; - }; - }; - - pinctrl@fd510000 { - blsp2_uart8_pins_active: blsp2-uart8-pins-active { - pins = "gpio45", "gpio46", "gpio47", "gpio48"; - function = "blsp_uart8"; - drive-strength = <8>; - bias-disable; - }; - - blsp2_uart8_pins_sleep: blsp2-uart8-pins-sleep { - pins = "gpio45", "gpio46", "gpio47", "gpio48"; - function = "gpio"; - drive-strength = <2>; - bias-pull-down; - }; - - bt_pins: bt-pins { - hostwake { - pins = "gpio75"; - function = "gpio"; - drive-strength = <16>; - input-enable; - }; - - devwake { - pins = "gpio91"; - function = "gpio"; - drive-strength = <2>; - }; - }; - - sdhc1_pin_a: sdhc1-pin-active { - clk { - pins = "sdc1_clk"; - drive-strength = <4>; - bias-disable; - }; - - cmd-data { - pins = "sdc1_cmd", "sdc1_data"; - drive-strength = <4>; - bias-pull-up; - }; - }; - - sdhc2_pin_a: sdhc2-pin-active { - clk-cmd-data { - pins = "gpio35", "gpio36", "gpio37", "gpio38", - "gpio39", "gpio40"; - function = "sdc3"; - drive-strength = <8>; - bias-disable; - }; - }; - - sdhc2_cd_pin: sdhc2-cd { - pins = "gpio62"; - function = "gpio"; - - drive-strength = <2>; - bias-disable; - }; - - sdhc3_pin_a: sdhc3-pin-active { - clk { - pins = "sdc2_clk"; - drive-strength = <6>; - bias-disable; - }; - - cmd-data { - pins = "sdc2_cmd", "sdc2_data"; - drive-strength = <6>; - bias-pull-up; - }; - }; - - i2c2_pins: i2c2 { - mux { - pins = "gpio6", "gpio7"; - function = "blsp_i2c2"; - - drive-strength = <2>; - bias-disable; - }; - }; - - i2c6_pins: i2c6 { - mux { - pins = "gpio29", "gpio30"; - function = "blsp_i2c6"; - - drive-strength = <2>; - bias-disable; - }; - }; - - i2c12_pins: i2c12 { - mux { - pins = "gpio87", "gpio88"; - function = "blsp_i2c12"; - - drive-strength = <2>; - bias-disable; - }; - }; - - i2c_touchkey_pins: i2c-touchkey { - mux { - pins = "gpio95", "gpio96"; - function = "gpio"; - input-enable; - bias-pull-up; - }; - }; - - i2c_led_gpioex_pins: i2c-led-gpioex { - mux { - pins = "gpio120", "gpio121"; - function = "gpio"; - input-enable; - bias-pull-down; - }; - }; - - gpioex_pin: gpioex { - res { - pins = "gpio145"; - function = "gpio"; - - bias-pull-up; - drive-strength = <2>; - }; - }; - - wifi_pin: wifi { - int { - pins = "gpio92"; - function = "gpio"; - - input-enable; - bias-pull-down; - }; - }; - - panel_te_pin: panel { - te { - pins = "gpio12"; - function = "mdp_vsync"; - - drive-strength = <2>; - bias-disable; - }; - }; - }; - - sdhc_1: sdhci@f9824900 { - status = "okay"; - - vmmc-supply = <&pma8084_l20>; - vqmmc-supply = <&pma8084_s4>; - - bus-width = <8>; - non-removable; - - pinctrl-names = "default"; - pinctrl-0 = <&sdhc1_pin_a>; - }; - - sdhc_2: sdhci@f9864900 { - status = "okay"; - - max-frequency = <100000000>; - - vmmc-supply = <&pma8084_l21>; - vqmmc-supply = <&pma8084_l13>; - - bus-width = <4>; - - /* cd-gpio is intentionally disabled. If enabled, an SD card - * present during boot is not initialized correctly. Without - * cd-gpios the driver resorts to polling, so hotplug works. - */ - pinctrl-names = "default"; - pinctrl-0 = <&sdhc2_pin_a /* &sdhc2_cd_pin */>; - // cd-gpios = <&msmgpio 62 GPIO_ACTIVE_LOW>; - }; - - sdhci@f98a4900 { - status = "okay"; - - #address-cells = <1>; - #size-cells = <0>; - - max-frequency = <100000000>; - - pinctrl-names = "default"; - pinctrl-0 = <&sdhc3_pin_a>; - - vmmc-supply = <&vreg_wlan>; - vqmmc-supply = <&pma8084_s4>; - - bus-width = <4>; - non-removable; - - wifi@1 { - reg = <1>; - compatible = "brcm,bcm4329-fmac"; - - interrupt-parent = <&msmgpio>; - interrupts = <92 IRQ_TYPE_LEVEL_HIGH>; - interrupt-names = "host-wake"; - - pinctrl-names = "default"; - pinctrl-0 = <&wlan_sleep_clk_pin &wifi_pin>; - }; - }; - - usb@f9a55000 { - status = "okay"; - - phys = <&usb_hs1_phy>; - phy-select = <&tcsr 0xb000 0>; - /*extcon = <&smbb>, <&usb_id>;*/ - /*vbus-supply = <&chg_otg>;*/ - - hnp-disable; - srp-disable; - adp-disable; - - ulpi { - phy@a { - status = "okay"; - - v1p8-supply = <&pma8084_l6>; - v3p3-supply = <&pma8084_l24>; - - /*extcon = <&smbb>;*/ - qcom,init-seq = /bits/ 8 <0x1 0x64>; - }; - }; - }; - - i2c@f9924000 { - status = "okay"; - - pinctrl-names = "default"; - pinctrl-0 = <&i2c2_pins>; - - touchscreen@20 { - compatible = "syna,rmi4-i2c"; - reg = <0x20>; - - interrupt-parent = <&pma8084_gpios>; - interrupts = <8 IRQ_TYPE_EDGE_FALLING>; - - vdd-supply = <&max77826_ldo13>; - vio-supply = <&pma8084_lvs2>; - - pinctrl-names = "default"; - pinctrl-0 = <&touch_pin>; - - syna,startup-delay-ms = <100>; - - #address-cells = <1>; - #size-cells = <0>; - - rmi4-f01@1 { - reg = <0x1>; - syna,nosleep-mode = <1>; - }; - - rmi4-f12@12 { - reg = <0x12>; - syna,sensor-type = <1>; - }; - }; - }; - - i2c@f9928000 { - status = "okay"; - - pinctrl-names = "default"; - pinctrl-0 = <&i2c6_pins>; - - pmic@60 { - reg = <0x60>; - compatible = "maxim,max77826"; - - regulators { - max77826_ldo1: LDO1 { - regulator-min-microvolt = <1200000>; - regulator-max-microvolt = <1200000>; - }; - - max77826_ldo2: LDO2 { - regulator-min-microvolt = <1000000>; - regulator-max-microvolt = <1000000>; - }; - - max77826_ldo3: LDO3 { - regulator-min-microvolt = <1200000>; - regulator-max-microvolt = <1200000>; - }; - - max77826_ldo4: LDO4 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - }; - - max77826_ldo5: LDO5 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - }; - - max77826_ldo6: LDO6 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <3300000>; - }; - - max77826_ldo7: LDO7 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - }; - - max77826_ldo8: LDO8 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <3300000>; - }; - - max77826_ldo9: LDO9 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - }; - - max77826_ldo10: LDO10 { - regulator-min-microvolt = <2800000>; - regulator-max-microvolt = <2950000>; - }; - - max77826_ldo11: LDO11 { - regulator-min-microvolt = <2700000>; - regulator-max-microvolt = <2950000>; - }; - - max77826_ldo12: LDO12 { - regulator-min-microvolt = <2500000>; - regulator-max-microvolt = <3300000>; - }; - - max77826_ldo13: LDO13 { - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - }; - - max77826_ldo14: LDO14 { - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - }; - - max77826_ldo15: LDO15 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - }; - - max77826_buck: BUCK { - regulator-min-microvolt = <1225000>; - regulator-max-microvolt = <1225000>; - }; - - max77826_buckboost: BUCKBOOST { - regulator-min-microvolt = <3400000>; - regulator-max-microvolt = <3400000>; - }; - }; - }; - }; - - i2c@f9968000 { - status = "okay"; - - pinctrl-names = "default"; - pinctrl-0 = <&i2c12_pins>; - - fuelgauge@36 { - compatible = "maxim,max17048"; - reg = <0x36>; - - maxim,double-soc; - maxim,rcomp = /bits/ 8 <0x56>; - - interrupt-parent = <&pma8084_gpios>; - interrupts = <21 IRQ_TYPE_LEVEL_LOW>; - - pinctrl-names = "default"; - pinctrl-0 = <&fuelgauge_pin>; - }; - }; - - adreno@fdb00000 { - status = "ok"; - }; - - mdss@fd900000 { - status = "ok"; - - mdp@fd900000 { - status = "ok"; - }; - - dsi@fd922800 { - status = "ok"; - - vdda-supply = <&pma8084_l2>; - vdd-supply = <&pma8084_l22>; - vddio-supply = <&pma8084_l12>; - - #address-cells = <1>; - #size-cells = <0>; - - ports { - port@1 { - endpoint { - remote-endpoint = <&panel_in>; - data-lanes = <0 1 2 3>; - }; - }; - }; - - panel: panel@0 { - reg = <0>; - compatible = "samsung,s6e3fa2"; - - pinctrl-names = "default"; - pinctrl-0 = <&panel_te_pin &panel_rst_pin>; - - iovdd-supply = <&pma8084_lvs4>; - vddr-supply = <&vreg_panel>; - - reset-gpios = <&pma8084_gpios 17 GPIO_ACTIVE_LOW>; - te-gpios = <&msmgpio 12 GPIO_ACTIVE_HIGH>; - - port { - panel_in: endpoint { - remote-endpoint = <&dsi0_out>; - }; - }; - }; - }; - - dsi-phy@fd922a00 { - status = "ok"; - - vddio-supply = <&pma8084_l12>; - }; - }; - - remoteproc@fc880000 { - cx-supply = <&pma8084_s2>; - mss-supply = <&pma8084_s6>; - mx-supply = <&pma8084_s1>; - pll-supply = <&pma8084_l12>; - }; -}; - -&spmi_bus { - pma8084@0 { - gpios@c000 { - gpio_keys_pin_a: gpio-keys-active { - pins = "gpio2", "gpio3", "gpio5"; - function = "normal"; - - bias-pull-up; - power-source = <PMA8084_GPIO_S4>; - }; - - touchkey_pin: touchkey-int-pin { - pins = "gpio6"; - function = "normal"; - bias-disable; - input-enable; - power-source = <PMA8084_GPIO_S4>; - }; - - touch_pin: touchscreen-int-pin { - pins = "gpio8"; - function = "normal"; - bias-disable; - input-enable; - power-source = <PMA8084_GPIO_S4>; - }; - - panel_en_pin: panel-en-pin { - pins = "gpio14"; - function = "normal"; - bias-pull-up; - power-source = <PMA8084_GPIO_S4>; - qcom,drive-strength = <PMIC_GPIO_STRENGTH_LOW>; - }; - - wlan_sleep_clk_pin: wlan-sleep-clk-pin { - pins = "gpio16"; - function = "func2"; - - output-high; - power-source = <PMA8084_GPIO_S4>; - qcom,drive-strength = <PMIC_GPIO_STRENGTH_HIGH>; - }; - - panel_rst_pin: panel-rst-pin { - pins = "gpio17"; - function = "normal"; - bias-disable; - power-source = <PMA8084_GPIO_S4>; - qcom,drive-strength = <PMIC_GPIO_STRENGTH_LOW>; - }; - - - fuelgauge_pin: fuelgauge-int-pin { - pins = "gpio21"; - function = "normal"; - bias-disable; - input-enable; - power-source = <PMA8084_GPIO_S4>; - }; - }; - }; -}; diff --git a/arch/arm/boot/dts/qcom-msm8974-sony-xperia-amami.dts b/arch/arm/boot/dts/qcom-msm8974-sony-xperia-amami.dts deleted file mode 100644 index 79e2cfbbb1ba..000000000000 --- a/arch/arm/boot/dts/qcom-msm8974-sony-xperia-amami.dts +++ /dev/null @@ -1,435 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0 -#include "qcom-msm8974.dtsi" -#include "qcom-pm8841.dtsi" -#include "qcom-pm8941.dtsi" -#include <dt-bindings/gpio/gpio.h> -#include <dt-bindings/input/input.h> -#include <dt-bindings/pinctrl/qcom,pmic-gpio.h> - -/ { - model = "Sony Xperia Z1 Compact"; - compatible = "sony,xperia-amami", "qcom,msm8974"; - - aliases { - serial0 = &blsp1_uart2; - }; - - chosen { - stdout-path = "serial0:115200n8"; - }; - - gpio-keys { - compatible = "gpio-keys"; - - pinctrl-names = "default"; - pinctrl-0 = <&gpio_keys_pin_a>; - - volume-down { - label = "volume_down"; - gpios = <&pm8941_gpios 2 GPIO_ACTIVE_LOW>; - linux,input-type = <1>; - linux,code = <KEY_VOLUMEDOWN>; - }; - - camera-snapshot { - label = "camera_snapshot"; - gpios = <&pm8941_gpios 3 GPIO_ACTIVE_LOW>; - linux,input-type = <1>; - linux,code = <KEY_CAMERA>; - }; - - camera-focus { - label = "camera_focus"; - gpios = <&pm8941_gpios 4 GPIO_ACTIVE_LOW>; - linux,input-type = <1>; - linux,code = <KEY_CAMERA_FOCUS>; - }; - - volume-up { - label = "volume_up"; - gpios = <&pm8941_gpios 5 GPIO_ACTIVE_LOW>; - linux,input-type = <1>; - linux,code = <KEY_VOLUMEUP>; - }; - }; - - memory@0 { - reg = <0 0x40000000>, <0x40000000 0x40000000>; - device_type = "memory"; - }; - - smd { - rpm { - rpm_requests { - pm8841-regulators { - s1 { - regulator-min-microvolt = <675000>; - regulator-max-microvolt = <1050000>; - }; - - s2 { - regulator-min-microvolt = <500000>; - regulator-max-microvolt = <1050000>; - }; - - s3 { - regulator-min-microvolt = <500000>; - regulator-max-microvolt = <1050000>; - }; - - s4 { - regulator-min-microvolt = <500000>; - regulator-max-microvolt = <1050000>; - }; - }; - - pm8941-regulators { - vdd_l1_l3-supply = <&pm8941_s1>; - vdd_l2_lvs1_2_3-supply = <&pm8941_s3>; - vdd_l4_l11-supply = <&pm8941_s1>; - vdd_l5_l7-supply = <&pm8941_s2>; - vdd_l6_l12_l14_l15-supply = <&pm8941_s2>; - vdd_l9_l10_l17_l22-supply = <&vreg_boost>; - vdd_l13_l20_l23_l24-supply = <&vreg_boost>; - vdd_l21-supply = <&vreg_boost>; - - s1 { - regulator-min-microvolt = <1300000>; - regulator-max-microvolt = <1300000>; - regulator-always-on; - regulator-boot-on; - }; - - s2 { - regulator-min-microvolt = <2150000>; - regulator-max-microvolt = <2150000>; - regulator-boot-on; - }; - - s3 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - regulator-always-on; - regulator-boot-on; - }; - - s4 { - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - }; - - l1 { - regulator-min-microvolt = <1225000>; - regulator-max-microvolt = <1225000>; - - regulator-always-on; - regulator-boot-on; - }; - - l2 { - regulator-min-microvolt = <1200000>; - regulator-max-microvolt = <1200000>; - }; - - l3 { - regulator-min-microvolt = <1200000>; - regulator-max-microvolt = <1200000>; - }; - - l4 { - regulator-min-microvolt = <1225000>; - regulator-max-microvolt = <1225000>; - }; - - l5 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - }; - - l6 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - - regulator-boot-on; - }; - - l7 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - - regulator-boot-on; - }; - - l8 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - }; - - l9 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <2950000>; - }; - - l11 { - regulator-min-microvolt = <1300000>; - regulator-max-microvolt = <1350000>; - }; - - l12 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - - regulator-always-on; - regulator-boot-on; - }; - - l13 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <2950000>; - - regulator-boot-on; - }; - - l14 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - }; - - l15 { - regulator-min-microvolt = <2050000>; - regulator-max-microvolt = <2050000>; - }; - - l16 { - regulator-min-microvolt = <2700000>; - regulator-max-microvolt = <2700000>; - }; - - l17 { - regulator-min-microvolt = <2700000>; - regulator-max-microvolt = <2700000>; - }; - - l18 { - regulator-min-microvolt = <2850000>; - regulator-max-microvolt = <2850000>; - }; - - l19 { - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - }; - - l20 { - regulator-min-microvolt = <2950000>; - regulator-max-microvolt = <2950000>; - - regulator-allow-set-load; - regulator-boot-on; - regulator-system-load = <200000>; - }; - - l21 { - regulator-min-microvolt = <2950000>; - regulator-max-microvolt = <2950000>; - - regulator-boot-on; - }; - - l22 { - regulator-min-microvolt = <3000000>; - regulator-max-microvolt = <3000000>; - }; - - l23 { - regulator-min-microvolt = <2800000>; - regulator-max-microvolt = <2800000>; - }; - - l24 { - regulator-min-microvolt = <3075000>; - regulator-max-microvolt = <3075000>; - - regulator-boot-on; - }; - }; - }; - }; - }; -}; - -&soc { - sdhci@f9824900 { - status = "okay"; - - vmmc-supply = <&pm8941_l20>; - vqmmc-supply = <&pm8941_s3>; - - bus-width = <8>; - non-removable; - - pinctrl-names = "default"; - pinctrl-0 = <&sdhc1_pin_a>; - }; - - sdhci@f98a4900 { - status = "okay"; - - bus-width = <4>; - - vmmc-supply = <&pm8941_l21>; - vqmmc-supply = <&pm8941_l13>; - - cd-gpios = <&msmgpio 62 GPIO_ACTIVE_LOW>; - - pinctrl-names = "default"; - pinctrl-0 = <&sdhc2_pin_a>, <&sdhc2_cd_pin_a>; - }; - - serial@f991e000 { - status = "okay"; - - pinctrl-names = "default"; - pinctrl-0 = <&blsp1_uart2_pin_a>; - }; - - - pinctrl@fd510000 { - blsp1_uart2_pin_a: blsp1-uart2-pin-active { - rx { - pins = "gpio5"; - function = "blsp_uart2"; - - drive-strength = <2>; - bias-pull-up; - }; - - tx { - pins = "gpio4"; - function = "blsp_uart2"; - - drive-strength = <4>; - bias-disable; - }; - }; - - i2c2_pins: i2c2 { - mux { - pins = "gpio6", "gpio7"; - function = "blsp_i2c2"; - - drive-strength = <2>; - bias-disable; - }; - }; - - sdhc1_pin_a: sdhc1-pin-active { - clk { - pins = "sdc1_clk"; - drive-strength = <16>; - bias-disable; - }; - - cmd-data { - pins = "sdc1_cmd", "sdc1_data"; - drive-strength = <10>; - bias-pull-up; - }; - }; - - sdhc2_cd_pin_a: sdhc2-cd-pin-active { - pins = "gpio62"; - function = "gpio"; - - drive-strength = <2>; - bias-disable; - }; - - sdhc2_pin_a: sdhc2-pin-active { - clk { - pins = "sdc2_clk"; - drive-strength = <10>; - bias-disable; - }; - - cmd-data { - pins = "sdc2_cmd", "sdc2_data"; - drive-strength = <6>; - bias-pull-up; - }; - }; - }; - - dma-controller@f9944000 { - qcom,controlled-remotely; - }; - - usb@f9a55000 { - status = "okay"; - - phys = <&usb_hs1_phy>; - phy-select = <&tcsr 0xb000 0>; - extcon = <&smbb>, <&usb_id>; - vbus-supply = <&chg_otg>; - - hnp-disable; - srp-disable; - adp-disable; - - ulpi { - phy@a { - status = "okay"; - - v1p8-supply = <&pm8941_l6>; - v3p3-supply = <&pm8941_l24>; - - extcon = <&smbb>; - qcom,init-seq = /bits/ 8 <0x1 0x64>; - }; - }; - }; -}; - -&spmi_bus { - pm8941@0 { - charger@1000 { - qcom,fast-charge-safe-current = <1300000>; - qcom,fast-charge-current-limit = <1300000>; - qcom,dc-current-limit = <1300000>; - qcom,fast-charge-safe-voltage = <4400000>; - qcom,fast-charge-high-threshold-voltage = <4350000>; - qcom,fast-charge-low-threshold-voltage = <3400000>; - qcom,auto-recharge-threshold-voltage = <4200000>; - qcom,minimum-input-voltage = <4300000>; - }; - - gpios@c000 { - gpio_keys_pin_a: gpio-keys-active { - pins = "gpio2", "gpio3", "gpio4", "gpio5"; - function = "normal"; - - bias-pull-up; - power-source = <PM8941_GPIO_S3>; - }; - }; - - coincell@2800 { - status = "okay"; - qcom,rset-ohms = <2100>; - qcom,vset-millivolts = <3000>; - }; - }; - - pm8941@1 { - wled@d800 { - status = "okay"; - - qcom,cs-out; - qcom,current-limit = <20>; - qcom,current-boost-limit = <805>; - qcom,switching-freq = <1600>; - qcom,ovp = <29>; - qcom,num-strings = <2>; - }; - }; -}; diff --git a/arch/arm/boot/dts/qcom-msm8974-sony-xperia-castor.dts b/arch/arm/boot/dts/qcom-msm8974-sony-xperia-castor.dts deleted file mode 100644 index e66937e3f7dd..000000000000 --- a/arch/arm/boot/dts/qcom-msm8974-sony-xperia-castor.dts +++ /dev/null @@ -1,723 +0,0 @@ -#include "qcom-msm8974pro.dtsi" -#include "qcom-pm8841.dtsi" -#include "qcom-pm8941.dtsi" -#include <dt-bindings/gpio/gpio.h> -#include <dt-bindings/input/input.h> -#include <dt-bindings/pinctrl/qcom,pmic-gpio.h> - -/ { - model = "Sony Xperia Z2 Tablet"; - compatible = "sony,xperia-castor", "qcom,msm8974"; - - aliases { - serial0 = &blsp1_uart2; - serial1 = &blsp2_uart7; - }; - - chosen { - stdout-path = "serial0:115200n8"; - }; - - gpio-keys { - compatible = "gpio-keys"; - - pinctrl-names = "default"; - pinctrl-0 = <&gpio_keys_pin_a>; - - volume-down { - label = "volume_down"; - gpios = <&pm8941_gpios 2 GPIO_ACTIVE_LOW>; - linux,input-type = <1>; - linux,code = <KEY_VOLUMEDOWN>; - }; - - camera-snapshot { - label = "camera_snapshot"; - gpios = <&pm8941_gpios 3 GPIO_ACTIVE_LOW>; - linux,input-type = <1>; - linux,code = <KEY_CAMERA>; - }; - - camera-focus { - label = "camera_focus"; - gpios = <&pm8941_gpios 4 GPIO_ACTIVE_LOW>; - linux,input-type = <1>; - linux,code = <KEY_CAMERA_FOCUS>; - }; - - volume-up { - label = "volume_up"; - gpios = <&pm8941_gpios 5 GPIO_ACTIVE_LOW>; - linux,input-type = <1>; - linux,code = <KEY_VOLUMEUP>; - }; - }; - - smd { - rpm { - rpm_requests { - pm8941-regulators { - vdd_l1_l3-supply = <&pm8941_s1>; - vdd_l2_lvs1_2_3-supply = <&pm8941_s3>; - vdd_l4_l11-supply = <&pm8941_s1>; - vdd_l5_l7-supply = <&pm8941_s2>; - vdd_l6_l12_l14_l15-supply = <&pm8941_s2>; - vdd_l9_l10_l17_l22-supply = <&vreg_boost>; - vdd_l13_l20_l23_l24-supply = <&vreg_boost>; - vdd_l21-supply = <&vreg_boost>; - - s1 { - regulator-min-microvolt = <1300000>; - regulator-max-microvolt = <1300000>; - regulator-always-on; - regulator-boot-on; - }; - - s2 { - regulator-min-microvolt = <2150000>; - regulator-max-microvolt = <2150000>; - regulator-boot-on; - }; - - s3 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - regulator-always-on; - regulator-boot-on; - - regulator-system-load = <154000>; - }; - - s4 { - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - }; - - l1 { - regulator-min-microvolt = <1225000>; - regulator-max-microvolt = <1225000>; - - regulator-always-on; - regulator-boot-on; - }; - - l2 { - regulator-min-microvolt = <1200000>; - regulator-max-microvolt = <1200000>; - }; - - l3 { - regulator-min-microvolt = <1200000>; - regulator-max-microvolt = <1200000>; - }; - - l4 { - regulator-min-microvolt = <1225000>; - regulator-max-microvolt = <1225000>; - }; - - l5 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - }; - - l6 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - - regulator-boot-on; - }; - - l7 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - - regulator-boot-on; - }; - - l8 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - }; - - l9 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <2950000>; - }; - - l11 { - regulator-min-microvolt = <1300000>; - regulator-max-microvolt = <1350000>; - }; - - l12 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - - regulator-always-on; - regulator-boot-on; - }; - - l13 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <2950000>; - - regulator-boot-on; - }; - - l14 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - }; - - l15 { - regulator-min-microvolt = <2050000>; - regulator-max-microvolt = <2050000>; - }; - - l16 { - regulator-min-microvolt = <2700000>; - regulator-max-microvolt = <2700000>; - }; - - l17 { - regulator-min-microvolt = <2700000>; - regulator-max-microvolt = <2700000>; - }; - - l18 { - regulator-min-microvolt = <2850000>; - regulator-max-microvolt = <2850000>; - }; - - l19 { - regulator-min-microvolt = <2850000>; - regulator-max-microvolt = <2850000>; - }; - - l20 { - regulator-min-microvolt = <2950000>; - regulator-max-microvolt = <2950000>; - - regulator-allow-set-load; - regulator-boot-on; - regulator-allow-set-load; - regulator-system-load = <500000>; - }; - - l21 { - regulator-min-microvolt = <2950000>; - regulator-max-microvolt = <2950000>; - - regulator-boot-on; - }; - - l22 { - regulator-min-microvolt = <3000000>; - regulator-max-microvolt = <3000000>; - }; - - l23 { - regulator-min-microvolt = <2800000>; - regulator-max-microvolt = <2800000>; - }; - - l24 { - regulator-min-microvolt = <3075000>; - regulator-max-microvolt = <3075000>; - - regulator-boot-on; - }; - }; - }; - }; - }; - - vreg_bl_vddio: lcd-backlight-vddio { - compatible = "regulator-fixed"; - regulator-name = "vreg_bl_vddio"; - regulator-min-microvolt = <3150000>; - regulator-max-microvolt = <3150000>; - - gpio = <&msmgpio 69 0>; - enable-active-high; - - vin-supply = <&pm8941_s3>; - startup-delay-us = <70000>; - - pinctrl-names = "default"; - pinctrl-0 = <&lcd_backlight_en_pin_a>; - }; - - vreg_vsp: lcd-dcdc-regulator { - compatible = "regulator-fixed"; - regulator-name = "vreg_vsp"; - regulator-min-microvolt = <5600000>; - regulator-max-microvolt = <5600000>; - - gpio = <&pm8941_gpios 20 GPIO_ACTIVE_HIGH>; - enable-active-high; - - pinctrl-names = "default"; - pinctrl-0 = <&lcd_dcdc_en_pin_a>; - }; - - vreg_wlan: wlan-regulator { - compatible = "regulator-fixed"; - - regulator-name = "wl-reg"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - - gpio = <&pm8941_gpios 18 GPIO_ACTIVE_HIGH>; - enable-active-high; - - pinctrl-names = "default"; - pinctrl-0 = <&wlan_regulator_pin>; - }; -}; - -&soc { - sdhci@f9824900 { - status = "okay"; - - vmmc-supply = <&pm8941_l20>; - vqmmc-supply = <&pm8941_s3>; - - bus-width = <8>; - non-removable; - - pinctrl-names = "default"; - pinctrl-0 = <&sdhc1_pin_a>; - }; - - sdhci@f9864900 { - status = "okay"; - - max-frequency = <100000000>; - non-removable; - vmmc-supply = <&vreg_wlan>; - - pinctrl-names = "default"; - pinctrl-0 = <&sdhc3_pin_a>; - - #address-cells = <1>; - #size-cells = <0>; - - bcrmf@1 { - compatible = "brcm,bcm4339-fmac", "brcm,bcm4329-fmac"; - reg = <1>; - - brcm,drive-strength = <10>; - - pinctrl-names = "default"; - pinctrl-0 = <&wlan_sleep_clk_pin>; - }; - }; - - sdhci@f98a4900 { - status = "okay"; - - bus-width = <4>; - - vmmc-supply = <&pm8941_l21>; - vqmmc-supply = <&pm8941_l13>; - - cd-gpios = <&msmgpio 62 GPIO_ACTIVE_LOW>; - - pinctrl-names = "default"; - pinctrl-0 = <&sdhc2_pin_a>, <&sdhc2_cd_pin_a>; - }; - - serial@f991e000 { - status = "okay"; - - pinctrl-names = "default"; - pinctrl-0 = <&blsp1_uart2_pin_a>; - }; - - serial@f995d000 { - status = "ok"; - - pinctrl-names = "default"; - pinctrl-0 = <&blsp2_uart7_pin_a>; - - bluetooth { - compatible = "brcm,bcm43438-bt"; - max-speed = <3000000>; - - pinctrl-names = "default"; - pinctrl-0 = <&bt_host_wake_pin>, - <&bt_dev_wake_pin>, - <&bt_reg_on_pin>; - - host-wakeup-gpios = <&msmgpio 95 GPIO_ACTIVE_HIGH>; - device-wakeup-gpios = <&msmgpio 96 GPIO_ACTIVE_HIGH>; - shutdown-gpios = <&pm8941_gpios 16 GPIO_ACTIVE_HIGH>; - }; - }; - - usb@f9a55000 { - status = "okay"; - - phys = <&usb_hs1_phy>; - phy-select = <&tcsr 0xb000 0>; - extcon = <&smbb>, <&usb_id>; - vbus-supply = <&chg_otg>; - - hnp-disable; - srp-disable; - adp-disable; - - ulpi { - phy@a { - status = "okay"; - - v1p8-supply = <&pm8941_l6>; - v3p3-supply = <&pm8941_l24>; - - extcon = <&smbb>; - qcom,init-seq = /bits/ 8 <0x1 0x64>; - }; - }; - }; - - pinctrl@fd510000 { - blsp1_uart2_pin_a: blsp1-uart2-pin-active { - rx { - pins = "gpio5"; - function = "blsp_uart2"; - - drive-strength = <2>; - bias-pull-up; - }; - - tx { - pins = "gpio4"; - function = "blsp_uart2"; - - drive-strength = <4>; - bias-disable; - }; - }; - - blsp2_uart7_pin_a: blsp2-uart7-pin-active { - tx { - pins = "gpio41"; - function = "blsp_uart7"; - - drive-strength = <2>; - bias-disable; - }; - - rx { - pins = "gpio42"; - function = "blsp_uart7"; - - drive-strength = <2>; - bias-pull-up; - }; - - cts { - pins = "gpio43"; - function = "blsp_uart7"; - - drive-strength = <2>; - bias-pull-up; - }; - - rts { - pins = "gpio44"; - function = "blsp_uart7"; - - drive-strength = <2>; - bias-disable; - }; - }; - - i2c8_pins: i2c8 { - mux { - pins = "gpio47", "gpio48"; - function = "blsp_i2c8"; - - drive-strength = <2>; - bias-disable; - }; - }; - - i2c11_pins: i2c11 { - mux { - pins = "gpio83", "gpio84"; - function = "blsp_i2c11"; - - drive-strength = <2>; - bias-disable; - }; - }; - - lcd_backlight_en_pin_a: lcd-backlight-vddio { - pins = "gpio69"; - drive-strength = <10>; - output-low; - bias-disable; - }; - - sdhc1_pin_a: sdhc1-pin-active { - clk { - pins = "sdc1_clk"; - drive-strength = <16>; - bias-disable; - }; - - cmd-data { - pins = "sdc1_cmd", "sdc1_data"; - drive-strength = <10>; - bias-pull-up; - }; - }; - - sdhc2_cd_pin_a: sdhc2-cd-pin-active { - pins = "gpio62"; - function = "gpio"; - - drive-strength = <2>; - bias-disable; - }; - - sdhc2_pin_a: sdhc2-pin-active { - clk { - pins = "sdc2_clk"; - drive-strength = <6>; - bias-disable; - }; - - cmd-data { - pins = "sdc2_cmd", "sdc2_data"; - drive-strength = <6>; - bias-pull-up; - }; - }; - - sdhc3_pin_a: sdhc3-pin-active { - clk { - pins = "gpio40"; - function = "sdc3"; - - drive-strength = <10>; - bias-disable; - }; - - cmd { - pins = "gpio39"; - function = "sdc3"; - - drive-strength = <10>; - bias-pull-up; - }; - - data { - pins = "gpio35", "gpio36", "gpio37", "gpio38"; - function = "sdc3"; - - drive-strength = <10>; - bias-pull-up; - }; - }; - - ts_int_pin: synaptics { - pin { - pins = "gpio86"; - function = "gpio"; - - drive-strength = <2>; - bias-disable; - input-enable; - }; - }; - - bt_host_wake_pin: bt-host-wake { - pins = "gpio95"; - function = "gpio"; - - drive-strength = <2>; - bias-disable; - output-low; - }; - - bt_dev_wake_pin: bt-dev-wake { - pins = "gpio96"; - function = "gpio"; - - drive-strength = <2>; - bias-disable; - }; - }; - - i2c@f9964000 { - status = "okay"; - - clock-frequency = <355000>; - qcom,src-freq = <50000000>; - - pinctrl-names = "default"; - pinctrl-0 = <&i2c8_pins>; - - synaptics@2c { - compatible = "syna,rmi4-i2c"; - reg = <0x2c>; - - interrupt-parent = <&msmgpio>; - interrupts = <86 IRQ_TYPE_EDGE_FALLING>; - - #address-cells = <1>; - #size-cells = <0>; - - vdd-supply = <&pm8941_l22>; - vio-supply = <&pm8941_lvs3>; - - pinctrl-names = "default"; - pinctrl-0 = <&ts_int_pin>; - - syna,startup-delay-ms = <10>; - - rmi-f01@1 { - reg = <0x1>; - syna,nosleep = <1>; - }; - - rmi-f11@11 { - reg = <0x11>; - syna,f11-flip-x = <1>; - syna,sensor-type = <1>; - }; - }; - }; - - i2c@f9967000 { - status = "okay"; - pinctrl-names = "default"; - pinctrl-0 = <&i2c11_pins>; - clock-frequency = <355000>; - qcom,src-freq = <50000000>; - - lp8566_wled: backlight@2c { - compatible = "ti,lp8556"; - reg = <0x2c>; - power-supply = <&vreg_bl_vddio>; - - bl-name = "backlight"; - dev-ctrl = /bits/ 8 <0x05>; - init-brt = /bits/ 8 <0x3f>; - rom_a0h { - rom-addr = /bits/ 8 <0xa0>; - rom-val = /bits/ 8 <0xff>; - }; - rom_a1h { - rom-addr = /bits/ 8 <0xa1>; - rom-val = /bits/ 8 <0x3f>; - }; - rom_a2h { - rom-addr = /bits/ 8 <0xa2>; - rom-val = /bits/ 8 <0x20>; - }; - rom_a3h { - rom-addr = /bits/ 8 <0xa3>; - rom-val = /bits/ 8 <0x5e>; - }; - rom_a4h { - rom-addr = /bits/ 8 <0xa4>; - rom-val = /bits/ 8 <0x02>; - }; - rom_a5h { - rom-addr = /bits/ 8 <0xa5>; - rom-val = /bits/ 8 <0x04>; - }; - rom_a6h { - rom-addr = /bits/ 8 <0xa6>; - rom-val = /bits/ 8 <0x80>; - }; - rom_a7h { - rom-addr = /bits/ 8 <0xa7>; - rom-val = /bits/ 8 <0xf7>; - }; - rom_a9h { - rom-addr = /bits/ 8 <0xa9>; - rom-val = /bits/ 8 <0x80>; - }; - rom_aah { - rom-addr = /bits/ 8 <0xaa>; - rom-val = /bits/ 8 <0x0f>; - }; - rom_aeh { - rom-addr = /bits/ 8 <0xae>; - rom-val = /bits/ 8 <0x0f>; - }; - }; - }; -}; - -&spmi_bus { - pm8941@0 { - charger@1000 { - qcom,fast-charge-safe-current = <1500000>; - qcom,fast-charge-current-limit = <1500000>; - qcom,dc-current-limit = <1800000>; - qcom,fast-charge-safe-voltage = <4400000>; - qcom,fast-charge-high-threshold-voltage = <4350000>; - qcom,fast-charge-low-threshold-voltage = <3400000>; - qcom,auto-recharge-threshold-voltage = <4200000>; - qcom,minimum-input-voltage = <4300000>; - }; - - gpios@c000 { - gpio_keys_pin_a: gpio-keys-active { - pins = "gpio2", "gpio5"; - function = "normal"; - - bias-pull-up; - power-source = <PM8941_GPIO_S3>; - }; - - bt_reg_on_pin: bt-reg-on { - pins = "gpio16"; - function = "normal"; - - output-low; - power-source = <PM8941_GPIO_S3>; - }; - - wlan_sleep_clk_pin: wl-sleep-clk { - pins = "gpio17"; - function = "func2"; - - output-high; - power-source = <PM8941_GPIO_S3>; - }; - - wlan_regulator_pin: wl-reg-active { - pins = "gpio18"; - function = "normal"; - - bias-disable; - power-source = <PM8941_GPIO_S3>; - }; - - lcd_dcdc_en_pin_a: lcd-dcdc-en-active { - pins = "gpio20"; - function = "normal"; - - bias-disable; - power-source = <PM8941_GPIO_S3>; - input-disable; - output-low; - }; - - }; - - coincell@2800 { - status = "okay"; - qcom,rset-ohms = <2100>; - qcom,vset-millivolts = <3000>; - }; - }; -}; diff --git a/arch/arm/boot/dts/qcom-msm8974-sony-xperia-honami.dts b/arch/arm/boot/dts/qcom-msm8974-sony-xperia-honami.dts deleted file mode 100644 index a62e5c25b23c..000000000000 --- a/arch/arm/boot/dts/qcom-msm8974-sony-xperia-honami.dts +++ /dev/null @@ -1,484 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0 -#include "qcom-msm8974.dtsi" -#include "qcom-pm8841.dtsi" -#include "qcom-pm8941.dtsi" -#include <dt-bindings/gpio/gpio.h> -#include <dt-bindings/input/input.h> -#include <dt-bindings/pinctrl/qcom,pmic-gpio.h> - -/ { - model = "Sony Xperia Z1"; - compatible = "sony,xperia-honami", "qcom,msm8974"; - - aliases { - serial0 = &blsp1_uart2; - }; - - chosen { - stdout-path = "serial0:115200n8"; - }; - - gpio-keys { - compatible = "gpio-keys"; - - pinctrl-names = "default"; - pinctrl-0 = <&gpio_keys_pin_a>; - - volume-down { - label = "volume_down"; - gpios = <&pm8941_gpios 2 GPIO_ACTIVE_LOW>; - linux,input-type = <1>; - linux,code = <KEY_VOLUMEDOWN>; - }; - - camera-snapshot { - label = "camera_snapshot"; - gpios = <&pm8941_gpios 3 GPIO_ACTIVE_LOW>; - linux,input-type = <1>; - linux,code = <KEY_CAMERA>; - }; - - camera-focus { - label = "camera_focus"; - gpios = <&pm8941_gpios 4 GPIO_ACTIVE_LOW>; - linux,input-type = <1>; - linux,code = <KEY_CAMERA_FOCUS>; - }; - - volume-up { - label = "volume_up"; - gpios = <&pm8941_gpios 5 GPIO_ACTIVE_LOW>; - linux,input-type = <1>; - linux,code = <KEY_VOLUMEUP>; - }; - }; - - memory@0 { - reg = <0 0x40000000>, <0x40000000 0x40000000>; - device_type = "memory"; - }; - - smd { - rpm { - rpm_requests { - pm8841-regulators { - s1 { - regulator-min-microvolt = <675000>; - regulator-max-microvolt = <1050000>; - }; - - s2 { - regulator-min-microvolt = <500000>; - regulator-max-microvolt = <1050000>; - }; - - s3 { - regulator-min-microvolt = <500000>; - regulator-max-microvolt = <1050000>; - }; - - s4 { - regulator-min-microvolt = <500000>; - regulator-max-microvolt = <1050000>; - }; - }; - - pm8941-regulators { - vdd_l1_l3-supply = <&pm8941_s1>; - vdd_l2_lvs1_2_3-supply = <&pm8941_s3>; - vdd_l4_l11-supply = <&pm8941_s1>; - vdd_l5_l7-supply = <&pm8941_s2>; - vdd_l6_l12_l14_l15-supply = <&pm8941_s2>; - vdd_l9_l10_l17_l22-supply = <&vreg_boost>; - vdd_l13_l20_l23_l24-supply = <&vreg_boost>; - vdd_l21-supply = <&vreg_boost>; - - s1 { - regulator-min-microvolt = <1300000>; - regulator-max-microvolt = <1300000>; - regulator-always-on; - regulator-boot-on; - }; - - s2 { - regulator-min-microvolt = <2150000>; - regulator-max-microvolt = <2150000>; - regulator-boot-on; - }; - - s3 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - regulator-always-on; - regulator-boot-on; - }; - - s4 { - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - }; - - l1 { - regulator-min-microvolt = <1225000>; - regulator-max-microvolt = <1225000>; - - regulator-always-on; - regulator-boot-on; - }; - - l2 { - regulator-min-microvolt = <1200000>; - regulator-max-microvolt = <1200000>; - }; - - l3 { - regulator-min-microvolt = <1200000>; - regulator-max-microvolt = <1200000>; - }; - - l4 { - regulator-min-microvolt = <1225000>; - regulator-max-microvolt = <1225000>; - }; - - l5 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - }; - - l6 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - - regulator-boot-on; - }; - - l7 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - - regulator-boot-on; - }; - - l8 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - }; - - l9 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <2950000>; - }; - - l11 { - regulator-min-microvolt = <1300000>; - regulator-max-microvolt = <1350000>; - }; - - l12 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - - regulator-always-on; - regulator-boot-on; - }; - - l13 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <2950000>; - - regulator-boot-on; - }; - - l14 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - }; - - l15 { - regulator-min-microvolt = <2050000>; - regulator-max-microvolt = <2050000>; - }; - - l16 { - regulator-min-microvolt = <2700000>; - regulator-max-microvolt = <2700000>; - }; - - l17 { - regulator-min-microvolt = <2700000>; - regulator-max-microvolt = <2700000>; - }; - - l18 { - regulator-min-microvolt = <2850000>; - regulator-max-microvolt = <2850000>; - }; - - l19 { - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - }; - - l20 { - regulator-min-microvolt = <2950000>; - regulator-max-microvolt = <2950000>; - - regulator-allow-set-load; - regulator-boot-on; - regulator-system-load = <200000>; - }; - - l21 { - regulator-min-microvolt = <2950000>; - regulator-max-microvolt = <2950000>; - - regulator-boot-on; - }; - - l22 { - regulator-min-microvolt = <3000000>; - regulator-max-microvolt = <3000000>; - }; - - l23 { - regulator-min-microvolt = <2800000>; - regulator-max-microvolt = <2800000>; - }; - - l24 { - regulator-min-microvolt = <3075000>; - regulator-max-microvolt = <3075000>; - - regulator-boot-on; - }; - }; - }; - }; - }; -}; - -&soc { - usb@f9a55000 { - status = "okay"; - - phys = <&usb_hs1_phy>; - phy-select = <&tcsr 0xb000 0>; - extcon = <&smbb>, <&usb_id>; - vbus-supply = <&chg_otg>; - - hnp-disable; - srp-disable; - adp-disable; - - ulpi { - phy@a { - status = "okay"; - - v1p8-supply = <&pm8941_l6>; - v3p3-supply = <&pm8941_l24>; - - extcon = <&smbb>; - qcom,init-seq = /bits/ 8 <0x1 0x64>; - }; - }; - }; - - sdhci@f9824900 { - status = "okay"; - - vmmc-supply = <&pm8941_l20>; - vqmmc-supply = <&pm8941_s3>; - - bus-width = <8>; - non-removable; - - pinctrl-names = "default"; - pinctrl-0 = <&sdhc1_pin_a>; - }; - - sdhci@f98a4900 { - status = "okay"; - - bus-width = <4>; - - vmmc-supply = <&pm8941_l21>; - vqmmc-supply = <&pm8941_l13>; - - cd-gpios = <&msmgpio 62 GPIO_ACTIVE_LOW>; - - pinctrl-names = "default"; - pinctrl-0 = <&sdhc2_pin_a>, <&sdhc2_cd_pin_a>; - }; - - serial@f991e000 { - status = "okay"; - - pinctrl-names = "default"; - pinctrl-0 = <&blsp1_uart2_pin_a>; - }; - - i2c@f9924000 { - status = "okay"; - - clock-frequency = <355000>; - qcom,src-freq = <50000000>; - - pinctrl-names = "default"; - pinctrl-0 = <&i2c2_pins>; - - synaptics@2c { - compatible = "syna,rmi4-i2c"; - reg = <0x2c>; - - interrupts-extended = <&msmgpio 61 IRQ_TYPE_EDGE_FALLING>; - - #address-cells = <1>; - #size-cells = <0>; - - vdd-supply = <&pm8941_l22>; - vio-supply = <&pm8941_lvs3>; - - pinctrl-names = "default"; - pinctrl-0 = <&ts_int_pin>; - - syna,startup-delay-ms = <10>; - - rmi4-f01@1 { - reg = <0x1>; - syna,nosleep-mode = <1>; - }; - - rmi4-f11@11 { - reg = <0x11>; - touchscreen-inverted-x; - syna,sensor-type = <1>; - }; - }; - }; - - pinctrl@fd510000 { - blsp1_uart2_pin_a: blsp1-uart2-pin-active { - rx { - pins = "gpio5"; - function = "blsp_uart2"; - - drive-strength = <2>; - bias-pull-up; - }; - - tx { - pins = "gpio4"; - function = "blsp_uart2"; - - drive-strength = <4>; - bias-disable; - }; - }; - - i2c2_pins: i2c2 { - mux { - pins = "gpio6", "gpio7"; - function = "blsp_i2c2"; - - drive-strength = <2>; - bias-disable; - }; - }; - - sdhc1_pin_a: sdhc1-pin-active { - clk { - pins = "sdc1_clk"; - drive-strength = <16>; - bias-disable; - }; - - cmd-data { - pins = "sdc1_cmd", "sdc1_data"; - drive-strength = <10>; - bias-pull-up; - }; - }; - - sdhc2_cd_pin_a: sdhc2-cd-pin-active { - pins = "gpio62"; - function = "gpio"; - - drive-strength = <2>; - bias-disable; - }; - - sdhc2_pin_a: sdhc2-pin-active { - clk { - pins = "sdc2_clk"; - drive-strength = <10>; - bias-disable; - }; - - cmd-data { - pins = "sdc2_cmd", "sdc2_data"; - drive-strength = <6>; - bias-pull-up; - }; - }; - - ts_int_pin: touch-int { - pin { - pins = "gpio61"; - function = "gpio"; - - drive-strength = <2>; - bias-disable; - input-enable; - }; - }; - }; - - dma-controller@f9944000 { - qcom,controlled-remotely; - }; -}; - -&spmi_bus { - pm8941@0 { - charger@1000 { - qcom,fast-charge-safe-current = <1500000>; - qcom,fast-charge-current-limit = <1500000>; - qcom,dc-current-limit = <1800000>; - qcom,fast-charge-safe-voltage = <4400000>; - qcom,fast-charge-high-threshold-voltage = <4350000>; - qcom,fast-charge-low-threshold-voltage = <3400000>; - qcom,auto-recharge-threshold-voltage = <4200000>; - qcom,minimum-input-voltage = <4300000>; - }; - - gpios@c000 { - gpio_keys_pin_a: gpio-keys-active { - pins = "gpio2", "gpio3", "gpio4", "gpio5"; - function = "normal"; - - bias-pull-up; - power-source = <PM8941_GPIO_S3>; - }; - }; - - coincell@2800 { - status = "okay"; - qcom,rset-ohms = <2100>; - qcom,vset-millivolts = <3000>; - }; - }; - - pm8941@1 { - wled@d800 { - status = "okay"; - - qcom,cs-out; - qcom,current-limit = <20>; - qcom,current-boost-limit = <805>; - qcom,switching-freq = <1600>; - qcom,ovp = <29>; - qcom,num-strings = <2>; - }; - }; -}; diff --git a/arch/arm/boot/dts/qcom-msm8974-sony-xperia-rhine-amami.dts b/arch/arm/boot/dts/qcom-msm8974-sony-xperia-rhine-amami.dts new file mode 100644 index 000000000000..68d5626bf491 --- /dev/null +++ b/arch/arm/boot/dts/qcom-msm8974-sony-xperia-rhine-amami.dts @@ -0,0 +1,13 @@ +// SPDX-License-Identifier: GPL-2.0 +#include "qcom-msm8974-sony-xperia-rhine.dtsi" + +/ { + model = "Sony Xperia Z1 Compact"; + compatible = "sony,xperia-amami", "qcom,msm8974"; +}; + +&smbb { + qcom,fast-charge-safe-current = <1300000>; + qcom,fast-charge-current-limit = <1300000>; + qcom,dc-current-limit = <1300000>; +}; diff --git a/arch/arm/boot/dts/qcom-msm8974-sony-xperia-rhine-honami.dts b/arch/arm/boot/dts/qcom-msm8974-sony-xperia-rhine-honami.dts new file mode 100644 index 000000000000..ea6a941d8f8c --- /dev/null +++ b/arch/arm/boot/dts/qcom-msm8974-sony-xperia-rhine-honami.dts @@ -0,0 +1,7 @@ +// SPDX-License-Identifier: GPL-2.0 +#include "qcom-msm8974-sony-xperia-rhine.dtsi" + +/ { + model = "Sony Xperia Z1"; + compatible = "sony,xperia-honami", "qcom,msm8974"; +}; diff --git a/arch/arm/boot/dts/qcom-msm8974-sony-xperia-rhine.dtsi b/arch/arm/boot/dts/qcom-msm8974-sony-xperia-rhine.dtsi new file mode 100644 index 000000000000..1d21de46f85c --- /dev/null +++ b/arch/arm/boot/dts/qcom-msm8974-sony-xperia-rhine.dtsi @@ -0,0 +1,457 @@ +// SPDX-License-Identifier: GPL-2.0 +#include "qcom-msm8974.dtsi" +#include "qcom-pm8841.dtsi" +#include "qcom-pm8941.dtsi" +#include <dt-bindings/input/input.h> +#include <dt-bindings/pinctrl/qcom,pmic-gpio.h> + +/ { + aliases { + serial0 = &blsp1_uart2; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + gpio-keys { + compatible = "gpio-keys"; + + pinctrl-names = "default"; + pinctrl-0 = <&gpio_keys_pin_a>; + + volume-down { + label = "volume_down"; + gpios = <&pm8941_gpios 2 GPIO_ACTIVE_LOW>; + linux,input-type = <1>; + linux,code = <KEY_VOLUMEDOWN>; + }; + + camera-snapshot { + label = "camera_snapshot"; + gpios = <&pm8941_gpios 3 GPIO_ACTIVE_LOW>; + linux,input-type = <1>; + linux,code = <KEY_CAMERA>; + }; + + camera-focus { + label = "camera_focus"; + gpios = <&pm8941_gpios 4 GPIO_ACTIVE_LOW>; + linux,input-type = <1>; + linux,code = <KEY_CAMERA_FOCUS>; + }; + + volume-up { + label = "volume_up"; + gpios = <&pm8941_gpios 5 GPIO_ACTIVE_LOW>; + linux,input-type = <1>; + linux,code = <KEY_VOLUMEUP>; + }; + }; + + reserved-memory { + #address-cells = <1>; + #size-cells = <1>; + ranges; + + ramoops@3e8e0000 { + compatible = "ramoops"; + reg = <0x3e8e0000 0x200000>; + + console-size = <0x100000>; + record-size = <0x10000>; + ftrace-size = <0x10000>; + pmsg-size = <0x80000>; + }; + }; +}; + +&blsp1_i2c2 { + status = "okay"; + clock-frequency = <355000>; + + synaptics@2c { + compatible = "syna,rmi4-i2c"; + reg = <0x2c>; + + interrupts-extended = <&tlmm 61 IRQ_TYPE_EDGE_FALLING>; + + #address-cells = <1>; + #size-cells = <0>; + + vdd-supply = <&pm8941_l22>; + vio-supply = <&pm8941_lvs3>; + + pinctrl-names = "default"; + pinctrl-0 = <&ts_int_pin>; + + syna,startup-delay-ms = <10>; + + rmi4-f01@1 { + reg = <0x1>; + syna,nosleep-mode = <1>; + }; + + rmi4-f11@11 { + reg = <0x11>; + touchscreen-inverted-x; + syna,sensor-type = <1>; + }; + }; +}; + +&blsp1_i2c6 { + status = "okay"; + clock-frequency = <355000>; + + nfc@28 { + compatible = "nxp,pn544-i2c"; + reg = <0x28>; + + interrupt-parent = <&tlmm>; + interrupts = <59 IRQ_TYPE_EDGE_RISING>; + + enable-gpios = <&pm8941_gpios 23 GPIO_ACTIVE_HIGH>; + firmware-gpios = <&tlmm 77 GPIO_ACTIVE_HIGH>; + }; +}; + +&blsp1_uart2 { + status = "okay"; +}; + +&blsp2_dma { + qcom,controlled-remotely; +}; + +&blsp2_i2c5 { + status = "okay"; + clock-frequency = <355000>; + + /* sii8334 MHL HDMI bridge */ +}; + +&otg { + status = "okay"; + + phys = <&usb_hs1_phy>; + phy-select = <&tcsr 0xb000 0>; + extcon = <&smbb>, <&usb_id>; + vbus-supply = <&chg_otg>; + + hnp-disable; + srp-disable; + adp-disable; + + ulpi { + phy@a { + status = "okay"; + + v1p8-supply = <&pm8941_l6>; + v3p3-supply = <&pm8941_l24>; + + extcon = <&smbb>; + qcom,init-seq = /bits/ 8 <0x1 0x64>; + }; + }; +}; + +&pm8941_coincell { + status = "okay"; + qcom,rset-ohms = <2100>; + qcom,vset-millivolts = <3000>; +}; + +&pm8941_gpios { + gpio_keys_pin_a: gpio-keys-active { + pins = "gpio2", "gpio3", "gpio4", "gpio5"; + function = "normal"; + + bias-pull-up; + power-source = <PM8941_GPIO_S3>; + }; +}; + +&pm8941_wled { + status = "okay"; + + qcom,cs-out; + qcom,current-limit = <20>; + qcom,current-boost-limit = <805>; + qcom,switching-freq = <1600>; + qcom,ovp = <29>; + qcom,num-strings = <2>; +}; + +&rpm_requests { + pm8841-regulators { + compatible = "qcom,rpm-pm8841-regulators"; + + pm8841_s1: s1 { + regulator-min-microvolt = <675000>; + regulator-max-microvolt = <1050000>; + }; + + pm8841_s2: s2 { + regulator-min-microvolt = <500000>; + regulator-max-microvolt = <1050000>; + }; + + pm8841_s3: s3 { + regulator-min-microvolt = <500000>; + regulator-max-microvolt = <1050000>; + }; + + pm8841_s4: s4 { + regulator-min-microvolt = <500000>; + regulator-max-microvolt = <1050000>; + }; + }; + + pm8941-regulators { + compatible = "qcom,rpm-pm8941-regulators"; + + vdd_l1_l3-supply = <&pm8941_s1>; + vdd_l2_lvs1_2_3-supply = <&pm8941_s3>; + vdd_l4_l11-supply = <&pm8941_s1>; + vdd_l5_l7-supply = <&pm8941_s2>; + vdd_l6_l12_l14_l15-supply = <&pm8941_s2>; + vdd_l9_l10_l17_l22-supply = <&vreg_boost>; + vdd_l13_l20_l23_l24-supply = <&vreg_boost>; + vdd_l21-supply = <&vreg_boost>; + + pm8941_s1: s1 { + regulator-min-microvolt = <1300000>; + regulator-max-microvolt = <1300000>; + regulator-always-on; + regulator-boot-on; + }; + + pm8941_s2: s2 { + regulator-min-microvolt = <2150000>; + regulator-max-microvolt = <2150000>; + regulator-boot-on; + }; + + pm8941_s3: s3 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + regulator-boot-on; + }; + + pm8941_s4: s4 { + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + }; + + pm8941_l1: l1 { + regulator-min-microvolt = <1225000>; + regulator-max-microvolt = <1225000>; + regulator-always-on; + regulator-boot-on; + }; + + pm8941_l2: l2 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + }; + + pm8941_l3: l3 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + }; + + pm8941_l4: l4 { + regulator-min-microvolt = <1225000>; + regulator-max-microvolt = <1225000>; + }; + + pm8941_l5: l5 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + pm8941_l6: l6 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-boot-on; + }; + + pm8941_l7: l7 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-boot-on; + }; + + pm8941_l8: l8 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + pm8941_l9: l9 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <2950000>; + }; + + pm8941_l11: l11 { + regulator-min-microvolt = <1300000>; + regulator-max-microvolt = <1350000>; + }; + + pm8941_l12: l12 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + regulator-boot-on; + }; + + pm8941_l13: l13 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <2950000>; + regulator-boot-on; + }; + + pm8941_l14: l14 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + pm8941_l15: l15 { + regulator-min-microvolt = <2050000>; + regulator-max-microvolt = <2050000>; + }; + + pm8941_l16: l16 { + regulator-min-microvolt = <2700000>; + regulator-max-microvolt = <2700000>; + }; + + pm8941_l17: l17 { + regulator-min-microvolt = <2700000>; + regulator-max-microvolt = <2700000>; + }; + + pm8941_l18: l18 { + regulator-min-microvolt = <2850000>; + regulator-max-microvolt = <2850000>; + }; + + pm8941_l19: l19 { + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; + + pm8941_l20: l20 { + regulator-min-microvolt = <2950000>; + regulator-max-microvolt = <2950000>; + regulator-system-load = <200000>; + regulator-allow-set-load; + regulator-boot-on; + }; + + pm8941_l21: l21 { + regulator-min-microvolt = <2950000>; + regulator-max-microvolt = <2950000>; + regulator-boot-on; + }; + + pm8941_l22: l22 { + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + }; + + pm8941_l23: l23 { + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + }; + + pm8941_l24: l24 { + regulator-min-microvolt = <3075000>; + regulator-max-microvolt = <3075000>; + regulator-boot-on; + }; + + pm8941_lvs3: lvs3 {}; + }; +}; + +&sdhc_1 { + status = "okay"; + + vmmc-supply = <&pm8941_l20>; + vqmmc-supply = <&pm8941_s3>; + + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&sdc1_on>; + pinctrl-1 = <&sdc1_off>; +}; + +&sdhc_2 { + status = "okay"; + + vmmc-supply = <&pm8941_l21>; + vqmmc-supply = <&pm8941_l13>; + + cd-gpios = <&tlmm 62 GPIO_ACTIVE_LOW>; + + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&sdc2_on>; + pinctrl-1 = <&sdc2_off>; +}; + +&smbb { + qcom,fast-charge-safe-current = <1500000>; + qcom,fast-charge-current-limit = <1500000>; + qcom,dc-current-limit = <1800000>; + qcom,fast-charge-safe-voltage = <4400000>; + qcom,fast-charge-high-threshold-voltage = <4350000>; + qcom,fast-charge-low-threshold-voltage = <3400000>; + qcom,auto-recharge-threshold-voltage = <4200000>; + qcom,minimum-input-voltage = <4300000>; +}; + +&tlmm { + ts_int_pin: touch-int { + pins = "gpio61"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + input-enable; + }; + + sdc1_on: sdc1-on { + clk { + pins = "sdc1_clk"; + drive-strength = <16>; + bias-disable; + }; + + cmd-data { + pins = "sdc1_cmd", "sdc1_data"; + drive-strength = <10>; + bias-pull-up; + }; + }; + + sdc2_on: sdc-on { + clk { + pins = "sdc2_clk"; + drive-strength = <10>; + bias-disable; + }; + + cmd-data { + pins = "sdc2_cmd", "sdc2_data"; + drive-strength = <6>; + bias-pull-up; + }; + + cd { + pins = "gpio62"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + }; + }; +}; diff --git a/arch/arm/boot/dts/qcom-msm8974.dtsi b/arch/arm/boot/dts/qcom-msm8974.dtsi index 412d94736c35..814ad0b46232 100644 --- a/arch/arm/boot/dts/qcom-msm8974.dtsi +++ b/arch/arm/boot/dts/qcom-msm8974.dtsi @@ -12,61 +12,19 @@ / { #address-cells = <1>; #size-cells = <1>; - model = "Qualcomm MSM8974"; - compatible = "qcom,msm8974"; interrupt-parent = <&intc>; - reserved-memory { - #address-cells = <1>; - #size-cells = <1>; - ranges; - - mpss_region: mpss@8000000 { - reg = <0x08000000 0x5100000>; - no-map; - }; - - mba_region: mba@d100000 { - reg = <0x0d100000 0x100000>; - no-map; - }; - - wcnss_region: wcnss@d200000 { - reg = <0x0d200000 0xa00000>; - no-map; - }; - - adsp_region: adsp@dc00000 { - reg = <0x0dc00000 0x1900000>; - no-map; - }; - - venus@f500000 { - reg = <0x0f500000 0x500000>; - no-map; - }; - - smem_region: smem@fa00000 { - reg = <0xfa00000 0x200000>; - no-map; - }; - - tz@fc00000 { - reg = <0x0fc00000 0x160000>; - no-map; - }; - - rfsa@fd60000 { - reg = <0x0fd60000 0x20000>; - no-map; + clocks { + xo_board: xo_board { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <19200000>; }; - rmtfs@fd80000 { - compatible = "qcom,rmtfs-mem"; - reg = <0x0fd80000 0x180000>; - no-map; - - qcom,client-id = <1>; + sleep_clk: sleep_clk { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <32768>; }; }; @@ -136,238 +94,75 @@ }; }; + firmware { + scm { + compatible = "qcom,scm"; + clocks = <&gcc GCC_CE1_CLK>, <&gcc GCC_CE1_AXI_CLK>, <&gcc GCC_CE1_AHB_CLK>; + clock-names = "core", "bus", "iface"; + }; + }; + memory { device_type = "memory"; reg = <0x0 0x0>; }; - thermal-zones { - cpu0-thermal { - polling-delay-passive = <250>; - polling-delay = <1000>; - - thermal-sensors = <&tsens 5>; - - trips { - cpu_alert0: trip0 { - temperature = <75000>; - hysteresis = <2000>; - type = "passive"; - }; - cpu_crit0: trip1 { - temperature = <110000>; - hysteresis = <2000>; - type = "critical"; - }; - }; - }; - - cpu1-thermal { - polling-delay-passive = <250>; - polling-delay = <1000>; - - thermal-sensors = <&tsens 6>; - - trips { - cpu_alert1: trip0 { - temperature = <75000>; - hysteresis = <2000>; - type = "passive"; - }; - cpu_crit1: trip1 { - temperature = <110000>; - hysteresis = <2000>; - type = "critical"; - }; - }; - }; - - cpu2-thermal { - polling-delay-passive = <250>; - polling-delay = <1000>; - - thermal-sensors = <&tsens 7>; - - trips { - cpu_alert2: trip0 { - temperature = <75000>; - hysteresis = <2000>; - type = "passive"; - }; - cpu_crit2: trip1 { - temperature = <110000>; - hysteresis = <2000>; - type = "critical"; - }; - }; - }; - - cpu3-thermal { - polling-delay-passive = <250>; - polling-delay = <1000>; - - thermal-sensors = <&tsens 8>; - - trips { - cpu_alert3: trip0 { - temperature = <75000>; - hysteresis = <2000>; - type = "passive"; - }; - cpu_crit3: trip1 { - temperature = <110000>; - hysteresis = <2000>; - type = "critical"; - }; - }; - }; - - q6-dsp-thermal { - polling-delay-passive = <250>; - polling-delay = <1000>; + pmu { + compatible = "qcom,krait-pmu"; + interrupts = <GIC_PPI 7 0xf04>; + }; - thermal-sensors = <&tsens 1>; + reserved-memory { + #address-cells = <1>; + #size-cells = <1>; + ranges; - trips { - q6_dsp_alert0: trip-point0 { - temperature = <90000>; - hysteresis = <2000>; - type = "hot"; - }; - }; + mpss_region: mpss@8000000 { + reg = <0x08000000 0x5100000>; + no-map; }; - modemtx-thermal { - polling-delay-passive = <250>; - polling-delay = <1000>; - - thermal-sensors = <&tsens 2>; - - trips { - modemtx_alert0: trip-point0 { - temperature = <90000>; - hysteresis = <2000>; - type = "hot"; - }; - }; + mba_region: mba@d100000 { + reg = <0x0d100000 0x100000>; + no-map; }; - video-thermal { - polling-delay-passive = <250>; - polling-delay = <1000>; - - thermal-sensors = <&tsens 3>; - - trips { - video_alert0: trip-point0 { - temperature = <95000>; - hysteresis = <2000>; - type = "hot"; - }; - }; + wcnss_region: wcnss@d200000 { + reg = <0x0d200000 0xa00000>; + no-map; }; - wlan-thermal { - polling-delay-passive = <250>; - polling-delay = <1000>; - - thermal-sensors = <&tsens 4>; - - trips { - wlan_alert0: trip-point0 { - temperature = <105000>; - hysteresis = <2000>; - type = "hot"; - }; - }; + adsp_region: adsp@dc00000 { + reg = <0x0dc00000 0x1900000>; + no-map; }; - gpu-top-thermal { - polling-delay-passive = <250>; - polling-delay = <1000>; - - thermal-sensors = <&tsens 9>; - - trips { - gpu1_alert0: trip-point0 { - temperature = <90000>; - hysteresis = <2000>; - type = "hot"; - }; - }; + venus_region: memory@f500000 { + reg = <0x0f500000 0x500000>; + no-map; }; - gpu-bottom-thermal { - polling-delay-passive = <250>; - polling-delay = <1000>; - - thermal-sensors = <&tsens 10>; - - trips { - gpu2_alert0: trip-point0 { - temperature = <90000>; - hysteresis = <2000>; - type = "hot"; - }; - }; + smem_region: smem@fa00000 { + reg = <0xfa00000 0x200000>; + no-map; }; - }; - cpu-pmu { - compatible = "qcom,krait-pmu"; - interrupts = <GIC_PPI 7 0xf04>; - }; - - clocks { - xo_board: xo_board { - compatible = "fixed-clock"; - #clock-cells = <0>; - clock-frequency = <19200000>; + tz_region: memory@fc00000 { + reg = <0x0fc00000 0x160000>; + no-map; }; - sleep_clk: sleep_clk { - compatible = "fixed-clock"; - #clock-cells = <0>; - clock-frequency = <32768>; + rfsa_mem: memory@fd60000 { + reg = <0x0fd60000 0x20000>; + no-map; }; - }; - - timer { - compatible = "arm,armv7-timer"; - interrupts = <GIC_PPI 2 0xf08>, - <GIC_PPI 3 0xf08>, - <GIC_PPI 4 0xf08>, - <GIC_PPI 1 0xf08>; - clock-frequency = <19200000>; - }; - - adsp-pil { - compatible = "qcom,msm8974-adsp-pil"; - - interrupts-extended = <&intc GIC_SPI 162 IRQ_TYPE_EDGE_RISING>, - <&adsp_smp2p_in 0 IRQ_TYPE_EDGE_RISING>, - <&adsp_smp2p_in 1 IRQ_TYPE_EDGE_RISING>, - <&adsp_smp2p_in 2 IRQ_TYPE_EDGE_RISING>, - <&adsp_smp2p_in 3 IRQ_TYPE_EDGE_RISING>; - interrupt-names = "wdog", "fatal", "ready", "handover", "stop-ack"; - - cx-supply = <&pm8841_s2>; - - clocks = <&xo_board>; - clock-names = "xo"; - - memory-region = <&adsp_region>; - qcom,smem-states = <&adsp_smp2p_out 0>; - qcom,smem-state-names = "stop"; - - smd-edge { - interrupts = <GIC_SPI 156 IRQ_TYPE_EDGE_RISING>; - - qcom,ipc = <&apcs 8 8>; - qcom,smd-edge = <1>; + rmtfs@fd80000 { + compatible = "qcom,rmtfs-mem"; + reg = <0x0fd80000 0x180000>; + no-map; - label = "lpass"; + qcom,client-id = <1>; }; }; @@ -497,11 +292,23 @@ }; }; - firmware { - scm { - compatible = "qcom,scm"; - clocks = <&gcc GCC_CE1_CLK>, <&gcc GCC_CE1_AXI_CLK>, <&gcc GCC_CE1_AHB_CLK>; - clock-names = "core", "bus", "iface"; + smd { + compatible = "qcom,smd"; + + rpm { + interrupts = <GIC_SPI 168 IRQ_TYPE_EDGE_RISING>; + qcom,ipc = <&apcs 8 0>; + qcom,smd-edge = <15>; + + rpm_requests: rpm_requests { + compatible = "qcom,rpm-msm8974"; + qcom,smd-channels = "rpm_requests"; + + rpmcc: clock-controller { + compatible = "qcom,rpmcc-msm8974", "qcom,rpmcc"; + #clock-cells = <1>; + }; + }; }; }; @@ -524,31 +331,6 @@ reg = <0xf9011000 0x1000>; }; - qfprom: qfprom@fc4bc000 { - #address-cells = <1>; - #size-cells = <1>; - compatible = "qcom,qfprom"; - reg = <0xfc4bc000 0x1000>; - tsens_calib: calib@d0 { - reg = <0xd0 0x18>; - }; - tsens_backup: backup@440 { - reg = <0x440 0x10>; - }; - }; - - tsens: thermal-sensor@fc4a9000 { - compatible = "qcom,msm8974-tsens"; - reg = <0xfc4a9000 0x1000>, /* TM */ - <0xfc4a8000 0x1000>; /* SROT */ - nvmem-cells = <&tsens_calib>, <&tsens_backup>; - nvmem-cell-names = "calib", "calib_backup"; - #qcom,sensors = <11>; - interrupts = <GIC_SPI 184 IRQ_TYPE_LEVEL_HIGH>; - interrupt-names = "uplow"; - #thermal-sensor-cells = <1>; - }; - timer@f9020000 { #address-cells = <1>; #size-cells = <1>; @@ -654,47 +436,59 @@ reg = <0xf90b8000 0x1000>, <0xf9008000 0x1000>; }; - restart@fc4ab000 { - compatible = "qcom,pshold"; - reg = <0xfc4ab000 0x4>; - }; + sdhc_1: sdhci@f9824900 { + compatible = "qcom,msm8974-sdhci", "qcom,sdhci-msm-v4"; + reg = <0xf9824900 0x11c>, <0xf9824000 0x800>; + reg-names = "hc_mem", "core_mem"; + interrupts = <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "hc_irq", "pwr_irq"; + clocks = <&gcc GCC_SDCC1_APPS_CLK>, + <&gcc GCC_SDCC1_AHB_CLK>, + <&xo_board>; + clock-names = "core", "iface", "xo"; + bus-width = <8>; + non-removable; - gcc: clock-controller@fc400000 { - compatible = "qcom,gcc-msm8974"; - #clock-cells = <1>; - #reset-cells = <1>; - #power-domain-cells = <1>; - reg = <0xfc400000 0x4000>; + status = "disabled"; }; - tcsr: syscon@fd4a0000 { - compatible = "syscon"; - reg = <0xfd4a0000 0x10000>; - }; + sdhc_3: sdhci@f9864900 { + compatible = "qcom,msm8974-sdhci", "qcom,sdhci-msm-v4"; + reg = <0xf9864900 0x11c>, <0xf9864000 0x800>; + reg-names = "hc_mem", "core_mem"; + interrupts = <GIC_SPI 127 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 224 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "hc_irq", "pwr_irq"; + clocks = <&gcc GCC_SDCC3_APPS_CLK>, + <&gcc GCC_SDCC3_AHB_CLK>, + <&xo_board>; + clock-names = "core", "iface", "xo"; + bus-width = <4>; - tcsr_mutex_block: syscon@fd484000 { - compatible = "syscon"; - reg = <0xfd484000 0x2000>; - }; + #address-cells = <1>; + #size-cells = <0>; - mmcc: clock-controller@fd8c0000 { - compatible = "qcom,mmcc-msm8974"; - #clock-cells = <1>; - #reset-cells = <1>; - #power-domain-cells = <1>; - reg = <0xfd8c0000 0x6000>; + status = "disabled"; }; - tcsr_mutex: tcsr-mutex { - compatible = "qcom,tcsr-mutex"; - syscon = <&tcsr_mutex_block 0 0x80>; + sdhc_2: sdhci@f98a4900 { + compatible = "qcom,msm8974-sdhci", "qcom,sdhci-msm-v4"; + reg = <0xf98a4900 0x11c>, <0xf98a4000 0x800>; + reg-names = "hc_mem", "core_mem"; + interrupts = <GIC_SPI 125 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 221 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "hc_irq", "pwr_irq"; + clocks = <&gcc GCC_SDCC2_APPS_CLK>, + <&gcc GCC_SDCC2_AHB_CLK>, + <&xo_board>; + clock-names = "core", "iface", "xo"; + bus-width = <4>; - #hwlock-cells = <1>; - }; + #address-cells = <1>; + #size-cells = <0>; - rpm_msg_ram: memory@fc428000 { - compatible = "qcom,rpm-msg-ram"; - reg = <0xfc428000 0x4000>; + status = "disabled"; }; blsp1_uart1: serial@f991d000 { @@ -715,7 +509,73 @@ status = "disabled"; }; - blsp2_uart7: serial@f995d000 { + blsp1_i2c1: i2c@f9923000 { + status = "disabled"; + compatible = "qcom,i2c-qup-v2.1.1"; + reg = <0xf9923000 0x1000>; + interrupts = <0 95 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&gcc GCC_BLSP1_QUP1_I2C_APPS_CLK>, <&gcc GCC_BLSP1_AHB_CLK>; + clock-names = "core", "iface"; + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&blsp1_i2c1_default>; + pinctrl-1 = <&blsp1_i2c1_sleep>; + #address-cells = <1>; + #size-cells = <0>; + }; + + blsp1_i2c2: i2c@f9924000 { + status = "disabled"; + compatible = "qcom,i2c-qup-v2.1.1"; + reg = <0xf9924000 0x1000>; + interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&gcc GCC_BLSP1_QUP2_I2C_APPS_CLK>, <&gcc GCC_BLSP1_AHB_CLK>; + clock-names = "core", "iface"; + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&blsp1_i2c2_default>; + pinctrl-1 = <&blsp1_i2c2_sleep>; + #address-cells = <1>; + #size-cells = <0>; + }; + + blsp1_i2c3: i2c@f9925000 { + status = "disabled"; + compatible = "qcom,i2c-qup-v2.1.1"; + reg = <0xf9925000 0x1000>; + interrupts = <0 97 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&gcc GCC_BLSP1_QUP3_I2C_APPS_CLK>, <&gcc GCC_BLSP1_AHB_CLK>; + clock-names = "core", "iface"; + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&blsp1_i2c3_default>; + pinctrl-1 = <&blsp1_i2c3_sleep>; + #address-cells = <1>; + #size-cells = <0>; + }; + + blsp1_i2c6: i2c@f9928000 { + status = "disabled"; + compatible = "qcom,i2c-qup-v2.1.1"; + reg = <0xf9928000 0x1000>; + interrupts = <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&gcc GCC_BLSP1_QUP6_I2C_APPS_CLK>, <&gcc GCC_BLSP1_AHB_CLK>; + clock-names = "core", "iface"; + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&blsp1_i2c6_default>; + pinctrl-1 = <&blsp1_i2c6_sleep>; + #address-cells = <1>; + #size-cells = <0>; + }; + + blsp2_dma: dma-controller@f9944000 { + compatible = "qcom,bam-v1.4.0"; + reg = <0xf9944000 0x19000>; + interrupts = <GIC_SPI 239 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&gcc GCC_BLSP2_AHB_CLK>; + clock-names = "bam_clk"; + #dma-cells = <1>; + qcom,ee = <0>; + }; + + blsp2_uart1: serial@f995d000 { compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm"; reg = <0xf995d000 0x1000>; interrupts = <GIC_SPI 113 IRQ_TYPE_NONE>; @@ -724,7 +584,7 @@ status = "disabled"; }; - blsp2_uart8: serial@f995e000 { + blsp2_uart2: serial@f995e000 { compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm"; reg = <0xf995e000 0x1000>; interrupts = <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>; @@ -733,7 +593,7 @@ status = "disabled"; }; - blsp2_uart10: serial@f9960000 { + blsp2_uart4: serial@f9960000 { compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm"; reg = <0xf9960000 0x1000>; interrupts = <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>; @@ -742,46 +602,45 @@ status = "disabled"; }; - sdhci@f9824900 { - compatible = "qcom,msm8974-sdhci", "qcom,sdhci-msm-v4"; - reg = <0xf9824900 0x11c>, <0xf9824000 0x800>; - reg-names = "hc_mem", "core_mem"; - interrupts = <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>; - interrupt-names = "hc_irq", "pwr_irq"; - clocks = <&gcc GCC_SDCC1_APPS_CLK>, - <&gcc GCC_SDCC1_AHB_CLK>, - <&xo_board>; - clock-names = "core", "iface", "xo"; + blsp2_i2c2: i2c@f9964000 { status = "disabled"; + compatible = "qcom,i2c-qup-v2.1.1"; + reg = <0xf9964000 0x1000>; + interrupts = <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&gcc GCC_BLSP2_QUP2_I2C_APPS_CLK>, <&gcc GCC_BLSP2_AHB_CLK>; + clock-names = "core", "iface"; + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&blsp2_i2c2_default>; + pinctrl-1 = <&blsp2_i2c2_sleep>; + #address-cells = <1>; + #size-cells = <0>; }; - sdhci@f9864900 { - compatible = "qcom,msm8974-sdhci", "qcom,sdhci-msm-v4"; - reg = <0xf9864900 0x11c>, <0xf9864000 0x800>; - reg-names = "hc_mem", "core_mem"; - interrupts = <GIC_SPI 127 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 224 IRQ_TYPE_LEVEL_HIGH>; - interrupt-names = "hc_irq", "pwr_irq"; - clocks = <&gcc GCC_SDCC3_APPS_CLK>, - <&gcc GCC_SDCC3_AHB_CLK>, - <&xo_board>; - clock-names = "core", "iface", "xo"; + blsp2_i2c5: i2c@f9967000 { status = "disabled"; + compatible = "qcom,i2c-qup-v2.1.1"; + reg = <0xf9967000 0x1000>; + interrupts = <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&gcc GCC_BLSP2_QUP5_I2C_APPS_CLK>, <&gcc GCC_BLSP2_AHB_CLK>; + clock-names = "core", "iface"; + dmas = <&blsp2_dma 20>, <&blsp2_dma 21>; + dma-names = "tx", "rx"; + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&blsp2_i2c5_default>; + pinctrl-1 = <&blsp2_i2c5_sleep>; + #address-cells = <1>; + #size-cells = <0>; }; - sdhci@f98a4900 { - compatible = "qcom,msm8974-sdhci", "qcom,sdhci-msm-v4"; - reg = <0xf98a4900 0x11c>, <0xf98a4000 0x800>; - reg-names = "hc_mem", "core_mem"; - interrupts = <GIC_SPI 125 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 221 IRQ_TYPE_LEVEL_HIGH>; - interrupt-names = "hc_irq", "pwr_irq"; - clocks = <&gcc GCC_SDCC2_APPS_CLK>, - <&gcc GCC_SDCC2_AHB_CLK>, - <&xo_board>; - clock-names = "core", "iface", "xo"; + blsp2_i2c6: i2c@f9968000 { status = "disabled"; + compatible = "qcom,i2c-qup-v2.1.1"; + reg = <0xf9968000 0x1000>; + interrupts = <0 106 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&gcc GCC_BLSP2_QUP6_I2C_APPS_CLK>, <&gcc GCC_BLSP2_AHB_CLK>; + clock-names = "core", "iface"; + #address-cells = <1>; + #size-cells = <0>; }; otg: usb@f9a55000 { @@ -835,55 +694,6 @@ clock-names = "core"; }; - remoteproc@fc880000 { - compatible = "qcom,msm8974-mss-pil"; - reg = <0xfc880000 0x100>, <0xfc820000 0x020>; - reg-names = "qdsp6", "rmb"; - - interrupts-extended = <&intc GIC_SPI 24 IRQ_TYPE_EDGE_RISING>, - <&modem_smp2p_in 0 IRQ_TYPE_EDGE_RISING>, - <&modem_smp2p_in 1 IRQ_TYPE_EDGE_RISING>, - <&modem_smp2p_in 2 IRQ_TYPE_EDGE_RISING>, - <&modem_smp2p_in 3 IRQ_TYPE_EDGE_RISING>; - interrupt-names = "wdog", "fatal", "ready", "handover", "stop-ack"; - - clocks = <&gcc GCC_MSS_Q6_BIMC_AXI_CLK>, - <&gcc GCC_MSS_CFG_AHB_CLK>, - <&gcc GCC_BOOT_ROM_AHB_CLK>, - <&xo_board>; - clock-names = "iface", "bus", "mem", "xo"; - - resets = <&gcc GCC_MSS_RESTART>; - reset-names = "mss_restart"; - - cx-supply = <&pm8841_s2>; - mss-supply = <&pm8841_s3>; - mx-supply = <&pm8841_s1>; - pll-supply = <&pm8941_l12>; - - qcom,halt-regs = <&tcsr_mutex_block 0x1180 0x1200 0x1280>; - - qcom,smem-states = <&modem_smp2p_out 0>; - qcom,smem-state-names = "stop"; - - mba { - memory-region = <&mba_region>; - }; - - mpss { - memory-region = <&mpss_region>; - }; - - smd-edge { - interrupts = <GIC_SPI 25 IRQ_TYPE_EDGE_RISING>; - - qcom,ipc = <&apcs 8 12>; - qcom,smd-edge = <0>; - - label = "modem"; - }; - }; - pronto: remoteproc@fb21b000 { compatible = "qcom,pronto-v2-pil", "qcom,pronto"; reg = <0xfb204000 0x2000>, <0xfb202000 0x1000>, <0xfb21b000 0x3000>; @@ -898,8 +708,6 @@ <&wcnss_smp2p_in 3 IRQ_TYPE_EDGE_RISING>; interrupt-names = "wdog", "fatal", "ready", "handover", "stop-ack"; - vddpx-supply = <&pm8941_s3>; - qcom,smem-states = <&wcnss_smp2p_out 0>; qcom,smem-state-names = "stop"; @@ -910,11 +718,6 @@ clocks = <&rpmcc RPM_SMD_CXO_A2>; clock-names = "xo"; - - vddxo-supply = <&pm8941_l6>; - vddrfa-supply = <&pm8941_l11>; - vddpa-supply = <&pm8941_l19>; - vdddig-supply = <&pm8941_s3>; }; smd-edge { @@ -942,139 +745,32 @@ interrupt-names = "tx", "rx"; qcom,smem-states = <&apps_smsm 10>, <&apps_smsm 9>; - qcom,smem-state-names = "tx-enable", "tx-rings-empty"; + qcom,smem-state-names = "tx-enable", + "tx-rings-empty"; }; }; }; }; - msmgpio: pinctrl@fd510000 { - compatible = "qcom,msm8974-pinctrl"; - reg = <0xfd510000 0x4000>; - gpio-controller; - gpio-ranges = <&msmgpio 0 0 146>; - #gpio-cells = <2>; - interrupt-controller; - #interrupt-cells = <2>; - interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>; - }; - - i2c@f9923000 { - status = "disabled"; - compatible = "qcom,i2c-qup-v2.1.1"; - reg = <0xf9923000 0x1000>; - interrupts = <0 95 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&gcc GCC_BLSP1_QUP1_I2C_APPS_CLK>, <&gcc GCC_BLSP1_AHB_CLK>; - clock-names = "core", "iface"; - #address-cells = <1>; - #size-cells = <0>; - }; - - i2c@f9924000 { - status = "disabled"; - compatible = "qcom,i2c-qup-v2.1.1"; - reg = <0xf9924000 0x1000>; - interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&gcc GCC_BLSP1_QUP2_I2C_APPS_CLK>, <&gcc GCC_BLSP1_AHB_CLK>; - clock-names = "core", "iface"; - #address-cells = <1>; - #size-cells = <0>; - }; - - blsp_i2c3: i2c@f9925000 { - status = "disabled"; - compatible = "qcom,i2c-qup-v2.1.1"; - reg = <0xf9925000 0x1000>; - interrupts = <0 97 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&gcc GCC_BLSP1_QUP3_I2C_APPS_CLK>, <&gcc GCC_BLSP1_AHB_CLK>; - clock-names = "core", "iface"; - #address-cells = <1>; - #size-cells = <0>; - }; - - blsp_i2c6: i2c@f9928000 { - status = "disabled"; - compatible = "qcom,i2c-qup-v2.1.1"; - reg = <0xf9928000 0x1000>; - interrupts = <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&gcc GCC_BLSP1_QUP6_I2C_APPS_CLK>, <&gcc GCC_BLSP1_AHB_CLK>; - clock-names = "core", "iface"; - #address-cells = <1>; - #size-cells = <0>; - }; - - blsp_i2c8: i2c@f9964000 { - status = "disabled"; - compatible = "qcom,i2c-qup-v2.1.1"; - reg = <0xf9964000 0x1000>; - interrupts = <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&gcc GCC_BLSP2_QUP2_I2C_APPS_CLK>, <&gcc GCC_BLSP2_AHB_CLK>; - clock-names = "core", "iface"; - #address-cells = <1>; - #size-cells = <0>; - }; - - blsp_i2c11: i2c@f9967000 { - status = "disabled"; - compatible = "qcom,i2c-qup-v2.1.1"; - reg = <0xf9967000 0x1000>; - interrupts = <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&gcc GCC_BLSP2_QUP5_I2C_APPS_CLK>, <&gcc GCC_BLSP2_AHB_CLK>; - clock-names = "core", "iface"; - #address-cells = <1>; - #size-cells = <0>; - dmas = <&blsp2_dma 20>, <&blsp2_dma 21>; - dma-names = "tx", "rx"; - }; - - blsp_i2c12: i2c@f9968000 { - status = "disabled"; - compatible = "qcom,i2c-qup-v2.1.1"; - reg = <0xf9968000 0x1000>; - interrupts = <0 106 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&gcc GCC_BLSP2_QUP6_I2C_APPS_CLK>, <&gcc GCC_BLSP2_AHB_CLK>; - clock-names = "core", "iface"; - #address-cells = <1>; - #size-cells = <0>; - }; - - spmi_bus: spmi@fc4cf000 { - compatible = "qcom,spmi-pmic-arb"; - reg-names = "core", "intr", "cnfg"; - reg = <0xfc4cf000 0x1000>, - <0xfc4cb000 0x1000>, - <0xfc4ca000 0x1000>; - interrupt-names = "periph_irq"; - interrupts = <GIC_SPI 190 IRQ_TYPE_LEVEL_HIGH>; - qcom,ee = <0>; - qcom,channel = <0>; - #address-cells = <2>; - #size-cells = <0>; - interrupt-controller; - #interrupt-cells = <4>; - }; - - blsp2_dma: dma-controller@f9944000 { - compatible = "qcom,bam-v1.4.0"; - reg = <0xf9944000 0x19000>; - interrupts = <GIC_SPI 239 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&gcc GCC_BLSP2_AHB_CLK>; - clock-names = "bam_clk"; - #dma-cells = <1>; - qcom,ee = <0>; - }; - - etr@fc322000 { + etf@fc307000 { compatible = "arm,coresight-tmc", "arm,primecell"; - reg = <0xfc322000 0x1000>; + reg = <0xfc307000 0x1000>; clocks = <&rpmcc RPM_SMD_QDSS_CLK>, <&rpmcc RPM_SMD_QDSS_A_CLK>; clock-names = "apb_pclk", "atclk"; + out-ports { + port { + etf_out: endpoint { + remote-endpoint = <&replicator_in>; + }; + }; + }; + in-ports { port { - etr_in: endpoint { - remote-endpoint = <&replicator_out0>; + etf_in: endpoint { + remote-endpoint = <&merger_out>; }; }; }; @@ -1096,59 +792,39 @@ }; }; - replicator@fc31c000 { - compatible = "arm,coresight-dynamic-replicator", "arm,primecell"; - reg = <0xfc31c000 0x1000>; + funnel@fc31a000 { + compatible = "arm,coresight-dynamic-funnel", "arm,primecell"; + reg = <0xfc31a000 0x1000>; clocks = <&rpmcc RPM_SMD_QDSS_CLK>, <&rpmcc RPM_SMD_QDSS_A_CLK>; clock-names = "apb_pclk", "atclk"; - out-ports { + in-ports { #address-cells = <1>; #size-cells = <0>; - port@0 { - reg = <0>; - replicator_out0: endpoint { - remote-endpoint = <&etr_in>; - }; - }; - port@1 { - reg = <1>; - replicator_out1: endpoint { - remote-endpoint = <&tpiu_in>; - }; - }; - }; - - in-ports { - port { - replicator_in: endpoint { - remote-endpoint = <&etf_out>; + /* + * Not described input ports: + * 0 - not-connected + * 1 - connected trought funnel to Multimedia CPU + * 2 - connected to Wireless CPU + * 3 - not-connected + * 4 - not-connected + * 6 - not-connected + * 7 - connected to STM + */ + port@5 { + reg = <5>; + funnel1_in5: endpoint { + remote-endpoint = <&kpss_out>; }; }; }; - }; - - etf@fc307000 { - compatible = "arm,coresight-tmc", "arm,primecell"; - reg = <0xfc307000 0x1000>; - - clocks = <&rpmcc RPM_SMD_QDSS_CLK>, <&rpmcc RPM_SMD_QDSS_A_CLK>; - clock-names = "apb_pclk", "atclk"; out-ports { port { - etf_out: endpoint { - remote-endpoint = <&replicator_in>; - }; - }; - }; - - in-ports { - port { - etf_in: endpoint { - remote-endpoint = <&merger_out>; + funnel1_out: endpoint { + remote-endpoint = <&merger_in1>; }; }; }; @@ -1188,85 +864,51 @@ }; }; - funnel@fc31a000 { - compatible = "arm,coresight-dynamic-funnel", "arm,primecell"; - reg = <0xfc31a000 0x1000>; + replicator@fc31c000 { + compatible = "arm,coresight-dynamic-replicator", "arm,primecell"; + reg = <0xfc31c000 0x1000>; clocks = <&rpmcc RPM_SMD_QDSS_CLK>, <&rpmcc RPM_SMD_QDSS_A_CLK>; clock-names = "apb_pclk", "atclk"; - in-ports { + out-ports { #address-cells = <1>; #size-cells = <0>; - /* - * Not described input ports: - * 0 - not-connected - * 1 - connected trought funnel to Multimedia CPU - * 2 - connected to Wireless CPU - * 3 - not-connected - * 4 - not-connected - * 6 - not-connected - * 7 - connected to STM - */ - port@5 { - reg = <5>; - funnel1_in5: endpoint { - remote-endpoint = <&kpss_out>; + port@0 { + reg = <0>; + replicator_out0: endpoint { + remote-endpoint = <&etr_in>; + }; + }; + port@1 { + reg = <1>; + replicator_out1: endpoint { + remote-endpoint = <&tpiu_in>; }; }; }; - out-ports { + in-ports { port { - funnel1_out: endpoint { - remote-endpoint = <&merger_in1>; + replicator_in: endpoint { + remote-endpoint = <&etf_out>; }; }; }; }; - funnel@fc345000 { /* KPSS funnel only 4 inputs are used */ - compatible = "arm,coresight-dynamic-funnel", "arm,primecell"; - reg = <0xfc345000 0x1000>; + etr@fc322000 { + compatible = "arm,coresight-tmc", "arm,primecell"; + reg = <0xfc322000 0x1000>; clocks = <&rpmcc RPM_SMD_QDSS_CLK>, <&rpmcc RPM_SMD_QDSS_A_CLK>; clock-names = "apb_pclk", "atclk"; in-ports { - #address-cells = <1>; - #size-cells = <0>; - - port@0 { - reg = <0>; - kpss_in0: endpoint { - remote-endpoint = <&etm0_out>; - }; - }; - port@1 { - reg = <1>; - kpss_in1: endpoint { - remote-endpoint = <&etm1_out>; - }; - }; - port@2 { - reg = <2>; - kpss_in2: endpoint { - remote-endpoint = <&etm2_out>; - }; - }; - port@3 { - reg = <3>; - kpss_in3: endpoint { - remote-endpoint = <&etm3_out>; - }; - }; - }; - - out-ports { port { - kpss_out: endpoint { - remote-endpoint = <&funnel1_in5>; + etr_in: endpoint { + remote-endpoint = <&replicator_out0>; }; }; }; @@ -1344,25 +986,66 @@ }; }; - ocmem@fdd00000 { - compatible = "qcom,msm8974-ocmem"; - reg = <0xfdd00000 0x2000>, - <0xfec00000 0x180000>; - reg-names = "ctrl", - "mem"; - clocks = <&rpmcc RPM_SMD_OCMEMGX_CLK>, - <&mmcc OCMEMCX_OCMEMNOC_CLK>; - clock-names = "core", - "iface"; + /* KPSS funnel, only 4 inputs are used */ + funnel@fc345000 { + compatible = "arm,coresight-dynamic-funnel", "arm,primecell"; + reg = <0xfc345000 0x1000>; - #address-cells = <1>; - #size-cells = <1>; + clocks = <&rpmcc RPM_SMD_QDSS_CLK>, <&rpmcc RPM_SMD_QDSS_A_CLK>; + clock-names = "apb_pclk", "atclk"; - gmu_sram: gmu-sram@0 { - reg = <0x0 0x100000>; + in-ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + kpss_in0: endpoint { + remote-endpoint = <&etm0_out>; + }; + }; + port@1 { + reg = <1>; + kpss_in1: endpoint { + remote-endpoint = <&etm1_out>; + }; + }; + port@2 { + reg = <2>; + kpss_in2: endpoint { + remote-endpoint = <&etm2_out>; + }; + }; + port@3 { + reg = <3>; + kpss_in3: endpoint { + remote-endpoint = <&etm3_out>; + }; + }; + }; + + out-ports { + port { + kpss_out: endpoint { + remote-endpoint = <&funnel1_in5>; + }; + }; }; }; + gcc: clock-controller@fc400000 { + compatible = "qcom,gcc-msm8974"; + #clock-cells = <1>; + #reset-cells = <1>; + #power-domain-cells = <1>; + reg = <0xfc400000 0x4000>; + }; + + rpm_msg_ram: memory@fc428000 { + compatible = "qcom,rpm-msg-ram"; + reg = <0xfc428000 0x4000>; + }; + bimc: interconnect@fc380000 { reg = <0xfc380000 0x6a000>; compatible = "qcom,msm8974-bimc"; @@ -1417,94 +1100,378 @@ <&rpmcc RPM_SMD_CNOC_A_CLK>; }; - gpu: adreno@fdb00000 { - status = "disabled"; + tsens: thermal-sensor@fc4a9000 { + compatible = "qcom,msm8974-tsens"; + reg = <0xfc4a9000 0x1000>, /* TM */ + <0xfc4a8000 0x1000>; /* SROT */ + nvmem-cells = <&tsens_calib>, <&tsens_backup>; + nvmem-cell-names = "calib", "calib_backup"; + #qcom,sensors = <11>; + interrupts = <GIC_SPI 184 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "uplow"; + #thermal-sensor-cells = <1>; + }; - compatible = "qcom,adreno-330.1", - "qcom,adreno"; - reg = <0xfdb00000 0x10000>; - reg-names = "kgsl_3d0_reg_memory"; - interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>; - interrupt-names = "kgsl_3d0_irq"; - clock-names = "core", - "iface", - "mem_iface"; - clocks = <&mmcc OXILI_GFX3D_CLK>, - <&mmcc OXILICX_AHB_CLK>, - <&mmcc OXILICX_AXI_CLK>; - sram = <&gmu_sram>; - power-domains = <&mmcc OXILICX_GDSC>; - operating-points-v2 = <&gpu_opp_table>; + restart@fc4ab000 { + compatible = "qcom,pshold"; + reg = <0xfc4ab000 0x4>; + }; - interconnects = <&mmssnoc MNOC_MAS_GRAPHICS_3D &bimc BIMC_SLV_EBI_CH0>, - <&ocmemnoc OCMEM_VNOC_MAS_GFX3D &ocmemnoc OCMEM_SLV_OCMEM>; - interconnect-names = "gfx-mem", - "ocmem"; + qfprom: qfprom@fc4bc000 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "qcom,qfprom"; + reg = <0xfc4bc000 0x1000>; + tsens_calib: calib@d0 { + reg = <0xd0 0x18>; + }; + tsens_backup: backup@440 { + reg = <0x440 0x10>; + }; + }; - // iommus = <&gpu_iommu 0>; + spmi_bus: spmi@fc4cf000 { + compatible = "qcom,spmi-pmic-arb"; + reg-names = "core", "intr", "cnfg"; + reg = <0xfc4cf000 0x1000>, + <0xfc4cb000 0x1000>, + <0xfc4ca000 0x1000>; + interrupt-names = "periph_irq"; + interrupts = <GIC_SPI 190 IRQ_TYPE_LEVEL_HIGH>; + qcom,ee = <0>; + qcom,channel = <0>; + #address-cells = <2>; + #size-cells = <0>; + interrupt-controller; + #interrupt-cells = <4>; + }; - gpu_opp_table: opp_table { - compatible = "operating-points-v2"; + remoteproc_mss: remoteproc@fc880000 { + compatible = "qcom,msm8974-mss-pil"; + reg = <0xfc880000 0x100>, <0xfc820000 0x020>; + reg-names = "qdsp6", "rmb"; - opp-320000000 { - opp-hz = /bits/ 64 <320000000>; + interrupts-extended = <&intc GIC_SPI 24 IRQ_TYPE_EDGE_RISING>, + <&modem_smp2p_in 0 IRQ_TYPE_EDGE_RISING>, + <&modem_smp2p_in 1 IRQ_TYPE_EDGE_RISING>, + <&modem_smp2p_in 2 IRQ_TYPE_EDGE_RISING>, + <&modem_smp2p_in 3 IRQ_TYPE_EDGE_RISING>; + interrupt-names = "wdog", "fatal", "ready", "handover", "stop-ack"; + + clocks = <&gcc GCC_MSS_Q6_BIMC_AXI_CLK>, + <&gcc GCC_MSS_CFG_AHB_CLK>, + <&gcc GCC_BOOT_ROM_AHB_CLK>, + <&xo_board>; + clock-names = "iface", "bus", "mem", "xo"; + + resets = <&gcc GCC_MSS_RESTART>; + reset-names = "mss_restart"; + + qcom,halt-regs = <&tcsr_mutex_block 0x1180 0x1200 0x1280>; + + qcom,smem-states = <&modem_smp2p_out 0>; + qcom,smem-state-names = "stop"; + + mba { + memory-region = <&mba_region>; + }; + + mpss { + memory-region = <&mpss_region>; + }; + + smd-edge { + interrupts = <GIC_SPI 25 IRQ_TYPE_EDGE_RISING>; + + qcom,ipc = <&apcs 8 12>; + qcom,smd-edge = <0>; + + label = "modem"; + }; + }; + + tcsr_mutex_block: syscon@fd484000 { + compatible = "syscon"; + reg = <0xfd484000 0x2000>; + }; + + tcsr: syscon@fd4a0000 { + compatible = "syscon"; + reg = <0xfd4a0000 0x10000>; + }; + + tlmm: pinctrl@fd510000 { + compatible = "qcom,msm8974-pinctrl"; + reg = <0xfd510000 0x4000>; + gpio-controller; + gpio-ranges = <&tlmm 0 0 146>; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>; + + sdc1_off: sdc1-off { + clk { + pins = "sdc1_clk"; + bias-disable; + drive-strength = <2>; }; - opp-200000000 { - opp-hz = /bits/ 64 <200000000>; + cmd { + pins = "sdc1_cmd"; + bias-pull-up; + drive-strength = <2>; }; - opp-27000000 { - opp-hz = /bits/ 64 <27000000>; + data { + pins = "sdc1_data"; + bias-pull-up; + drive-strength = <2>; + }; + }; + + sdc2_off: sdc2-off { + clk { + pins = "sdc2_clk"; + bias-disable; + drive-strength = <2>; + }; + + cmd { + pins = "sdc2_cmd"; + bias-pull-up; + drive-strength = <2>; + }; + + data { + pins = "sdc2_data"; + bias-pull-up; + drive-strength = <2>; + }; + + cd { + pins = "gpio54"; + bias-disable; + drive-strength = <2>; + }; + }; + + blsp1_uart2_active: blsp1-uart2-active { + rx { + pins = "gpio5"; + function = "blsp_uart2"; + drive-strength = <2>; + bias-pull-up; + }; + + tx { + pins = "gpio4"; + function = "blsp_uart2"; + drive-strength = <4>; + bias-disable; + }; + }; + + blsp2_uart1_active: blsp2-uart1-active { + tx-rts { + pins = "gpio41", "gpio44"; + function = "blsp_uart7"; + drive-strength = <2>; + bias-disable; + }; + + rx-cts { + pins = "gpio42", "gpio43"; + function = "blsp_uart7"; + drive-strength = <2>; + bias-pull-up; + }; + }; + + blsp2_uart1_sleep: blsp2-uart1-sleep { + pins = "gpio41", "gpio42", "gpio43", "gpio44"; + function = "gpio"; + drive-strength = <2>; + bias-pull-down; + }; + + blsp2_uart4_active: blsp2-uart4-active { + tx-rts { + pins = "gpio53", "gpio56"; + function = "blsp_uart10"; + drive-strength = <2>; + bias-disable; + }; + + rx-cts { + pins = "gpio54", "gpio55"; + function = "blsp_uart10"; + drive-strength = <2>; + bias-pull-up; + }; + }; + + blsp1_i2c1_default: blsp1-i2c1-default { + pins = "gpio2", "gpio3"; + function = "blsp_i2c1"; + drive-strength = <2>; + bias-disable; + }; + + blsp1_i2c1_sleep: blsp1-i2c1-sleep { + pins = "gpio2", "gpio3"; + function = "blsp_i2c1"; + drive-strength = <2>; + bias-pull-up; + }; + + blsp1_i2c2_default: blsp1-i2c2-default { + pins = "gpio6", "gpio7"; + function = "blsp_i2c2"; + drive-strength = <2>; + bias-disable; + }; + + blsp1_i2c2_sleep: blsp1-i2c2-sleep { + pins = "gpio6", "gpio7"; + function = "blsp_i2c2"; + drive-strength = <2>; + bias-pull-up; + }; + + blsp1_i2c3_default: blsp1-i2c3-default { + pins = "gpio10", "gpio11"; + function = "blsp_i2c3"; + drive-strength = <2>; + bias-disable; + }; + + blsp1_i2c3_sleep: blsp1-i2c3-sleep { + pins = "gpio10", "gpio11"; + function = "blsp_i2c3"; + drive-strength = <2>; + bias-pull-up; + }; + + /* BLSP1_I2C4 info is missing */ + + /* BLSP1_I2C5 info is missing */ + + blsp1_i2c6_default: blsp1-i2c6-default { + pins = "gpio29", "gpio30"; + function = "blsp_i2c6"; + drive-strength = <2>; + bias-disable; + }; + + blsp1_i2c6_sleep: blsp1-i2c6-sleep { + pins = "gpio29", "gpio30"; + function = "blsp_i2c6"; + drive-strength = <2>; + bias-pull-up; + }; + /* 6 interfaces per QUP, BLSP2 indexes are numbered (n)+6 */ + + /* BLSP2_I2C1 info is missing */ + + blsp2_i2c2_default: blsp2-i2c2-default { + pins = "gpio47", "gpio48"; + function = "blsp_i2c8"; + drive-strength = <2>; + bias-disable; + }; + + blsp2_i2c2_sleep: blsp2-i2c2-sleep { + pins = "gpio47", "gpio48"; + function = "blsp_i2c8"; + drive-strength = <2>; + bias-pull-up; + }; + + /* BLSP2_I2C3 info is missing */ + + /* BLSP2_I2C4 info is missing */ + + blsp2_i2c5_default: blsp2-i2c5-default { + pins = "gpio83", "gpio84"; + function = "blsp_i2c11"; + drive-strength = <2>; + bias-disable; + }; + + blsp2_i2c5_sleep: blsp2-i2c5-sleep { + pins = "gpio83", "gpio84"; + function = "blsp_i2c11"; + drive-strength = <2>; + bias-pull-up; + }; + + /* BLSP2_I2C6 info is missing - nobody uses it though? */ + + spi8_default: spi8_default { + mosi { + pins = "gpio45"; + function = "blsp_spi8"; + }; + miso { + pins = "gpio46"; + function = "blsp_spi8"; + }; + cs { + pins = "gpio47"; + function = "blsp_spi8"; + }; + clk { + pins = "gpio48"; + function = "blsp_spi8"; }; }; }; - mdss: mdss@fd900000 { - status = "disabled"; + mmcc: clock-controller@fd8c0000 { + compatible = "qcom,mmcc-msm8974"; + #clock-cells = <1>; + #reset-cells = <1>; + #power-domain-cells = <1>; + reg = <0xfd8c0000 0x6000>; + }; + mdss: mdss@fd900000 { compatible = "qcom,mdss"; - reg = <0xfd900000 0x100>, - <0xfd924000 0x1000>; - reg-names = "mdss_phys", - "vbif_phys"; + reg = <0xfd900000 0x100>, <0xfd924000 0x1000>; + reg-names = "mdss_phys", "vbif_phys"; power-domains = <&mmcc MDSS_GDSC>; clocks = <&mmcc MDSS_AHB_CLK>, - <&mmcc MDSS_AXI_CLK>, - <&mmcc MDSS_VSYNC_CLK>; - clock-names = "iface", - "bus", - "vsync"; + <&mmcc MDSS_AXI_CLK>, + <&mmcc MDSS_VSYNC_CLK>; + clock-names = "iface", "bus", "vsync"; interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>; interrupt-controller; #interrupt-cells = <1>; + status = "disabled"; + #address-cells = <1>; #size-cells = <1>; ranges; mdp: mdp@fd900000 { - status = "disabled"; - compatible = "qcom,mdp5"; reg = <0xfd900100 0x22000>; reg-names = "mdp_phys"; interrupt-parent = <&mdss>; - interrupts = <0 0>; + interrupts = <0>; clocks = <&mmcc MDSS_AHB_CLK>, <&mmcc MDSS_AXI_CLK>, <&mmcc MDSS_MDP_CLK>, <&mmcc MDSS_VSYNC_CLK>; - clock-names = "iface", - "bus", - "core", - "vsync"; + clock-names = "iface", "bus", "core", "vsync"; interconnects = <&mmssnoc MNOC_MAS_MDP_PORT0 &bimc BIMC_SLV_EBI_CH0>; interconnect-names = "mdp0-mem"; @@ -1523,38 +1490,39 @@ }; dsi0: dsi@fd922800 { - status = "disabled"; - compatible = "qcom,mdss-dsi-ctrl"; reg = <0xfd922800 0x1f8>; reg-names = "dsi_ctrl"; interrupt-parent = <&mdss>; - interrupts = <4 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <4>; - assigned-clocks = <&mmcc BYTE0_CLK_SRC>, - <&mmcc PCLK0_CLK_SRC>; - assigned-clock-parents = <&dsi_phy0 0>, - <&dsi_phy0 1>; + assigned-clocks = <&mmcc BYTE0_CLK_SRC>, <&mmcc PCLK0_CLK_SRC>; + assigned-clock-parents = <&dsi0_phy 0>, <&dsi0_phy 1>; clocks = <&mmcc MDSS_MDP_CLK>, - <&mmcc MDSS_AHB_CLK>, - <&mmcc MDSS_AXI_CLK>, - <&mmcc MDSS_BYTE0_CLK>, - <&mmcc MDSS_PCLK0_CLK>, - <&mmcc MDSS_ESC0_CLK>, - <&mmcc MMSS_MISC_AHB_CLK>; + <&mmcc MDSS_AHB_CLK>, + <&mmcc MDSS_AXI_CLK>, + <&mmcc MDSS_BYTE0_CLK>, + <&mmcc MDSS_PCLK0_CLK>, + <&mmcc MDSS_ESC0_CLK>, + <&mmcc MMSS_MISC_AHB_CLK>; clock-names = "mdp_core", - "iface", - "bus", - "byte", - "pixel", - "core", - "core_mmss"; - - phys = <&dsi_phy0>; + "iface", + "bus", + "byte", + "pixel", + "core", + "core_mmss"; + + phys = <&dsi0_phy>; phy-names = "dsi-phy"; + status = "disabled"; + + #address-cells = <1>; + #size-cells = <0>; + ports { #address-cells = <1>; #size-cells = <0>; @@ -1574,28 +1542,115 @@ }; }; - dsi_phy0: dsi-phy@fd922a00 { - status = "disabled"; - + dsi0_phy: dsi-phy@fd922a00 { compatible = "qcom,dsi-phy-28nm-hpm"; reg = <0xfd922a00 0xd4>, <0xfd922b00 0x280>, <0xfd922d80 0x30>; reg-names = "dsi_pll", - "dsi_phy", - "dsi_phy_regulator"; + "dsi_phy", + "dsi_phy_regulator"; #clock-cells = <1>; #phy-cells = <0>; - qcom,dsi-phy-index = <0>; clocks = <&mmcc MDSS_AHB_CLK>, <&xo_board>; clock-names = "iface", "ref"; + + status = "disabled"; }; }; - imem@fe805000 { + gpu: adreno@fdb00000 { + compatible = "qcom,adreno-330.1", "qcom,adreno"; + reg = <0xfdb00000 0x10000>; + reg-names = "kgsl_3d0_reg_memory"; + + interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "kgsl_3d0_irq"; + + clocks = <&mmcc OXILI_GFX3D_CLK>, + <&mmcc OXILICX_AHB_CLK>, + <&mmcc OXILICX_AXI_CLK>; + clock-names = "core", "iface", "mem_iface"; + + sram = <&gmu_sram>; + power-domains = <&mmcc OXILICX_GDSC>; + operating-points-v2 = <&gpu_opp_table>; + + interconnects = <&mmssnoc MNOC_MAS_GRAPHICS_3D &bimc BIMC_SLV_EBI_CH0>, + <&ocmemnoc OCMEM_VNOC_MAS_GFX3D &ocmemnoc OCMEM_SLV_OCMEM>; + interconnect-names = "gfx-mem", "ocmem"; + + // iommus = <&gpu_iommu 0>; + status = "disabled"; + + gpu_opp_table: opp_table { + compatible = "operating-points-v2"; + + opp-320000000 { + opp-hz = /bits/ 64 <320000000>; + }; + + opp-200000000 { + opp-hz = /bits/ 64 <200000000>; + }; + + opp-27000000 { + opp-hz = /bits/ 64 <27000000>; + }; + }; + }; + + ocmem@fdd00000 { + compatible = "qcom,msm8974-ocmem"; + reg = <0xfdd00000 0x2000>, + <0xfec00000 0x180000>; + reg-names = "ctrl", "mem"; + clocks = <&rpmcc RPM_SMD_OCMEMGX_CLK>, + <&mmcc OCMEMCX_OCMEMNOC_CLK>; + clock-names = "core", "iface"; + + #address-cells = <1>; + #size-cells = <1>; + + gmu_sram: gmu-sram@0 { + reg = <0x0 0x100000>; + }; + }; + + remoteproc_adsp: remoteproc@fe200000 { + compatible = "qcom,msm8974-adsp-pil"; + reg = <0xfe200000 0x100>; + + interrupts-extended = <&intc GIC_SPI 162 IRQ_TYPE_EDGE_RISING>, + <&adsp_smp2p_in 0 IRQ_TYPE_EDGE_RISING>, + <&adsp_smp2p_in 1 IRQ_TYPE_EDGE_RISING>, + <&adsp_smp2p_in 2 IRQ_TYPE_EDGE_RISING>, + <&adsp_smp2p_in 3 IRQ_TYPE_EDGE_RISING>; + interrupt-names = "wdog", "fatal", "ready", "handover", "stop-ack"; + + clocks = <&xo_board>; + clock-names = "xo"; + + memory-region = <&adsp_region>; + + qcom,smem-states = <&adsp_smp2p_out 0>; + qcom,smem-state-names = "stop"; + + smd-edge { + interrupts = <GIC_SPI 156 IRQ_TYPE_EDGE_RISING>; + + qcom,ipc = <&apcs 8 8>; + qcom,smd-edge = <1>; + label = "lpass"; + #address-cells = <1>; + #size-cells = <0>; + }; + }; + + imem: imem@fe805000 { compatible = "syscon", "simple-mfd"; reg = <0xfe805000 0x1000>; @@ -1606,76 +1661,194 @@ }; }; - smd { - compatible = "qcom,smd"; + tcsr_mutex: tcsr-mutex { + compatible = "qcom,tcsr-mutex"; + syscon = <&tcsr_mutex_block 0 0x80>; - rpm { - interrupts = <GIC_SPI 168 IRQ_TYPE_EDGE_RISING>; - qcom,ipc = <&apcs 8 0>; - qcom,smd-edge = <15>; + #hwlock-cells = <1>; + }; - rpm_requests { - compatible = "qcom,rpm-msm8974"; - qcom,smd-channels = "rpm_requests"; + thermal-zones { + cpu0-thermal { + polling-delay-passive = <250>; + polling-delay = <1000>; - rpmcc: clock-controller { - compatible = "qcom,rpmcc-msm8974", "qcom,rpmcc"; - #clock-cells = <1>; + thermal-sensors = <&tsens 5>; + + trips { + cpu_alert0: trip0 { + temperature = <75000>; + hysteresis = <2000>; + type = "passive"; + }; + cpu_crit0: trip1 { + temperature = <110000>; + hysteresis = <2000>; + type = "critical"; + }; + }; + }; + + cpu1-thermal { + polling-delay-passive = <250>; + polling-delay = <1000>; + + thermal-sensors = <&tsens 6>; + + trips { + cpu_alert1: trip0 { + temperature = <75000>; + hysteresis = <2000>; + type = "passive"; + }; + cpu_crit1: trip1 { + temperature = <110000>; + hysteresis = <2000>; + type = "critical"; + }; + }; + }; + + cpu2-thermal { + polling-delay-passive = <250>; + polling-delay = <1000>; + + thermal-sensors = <&tsens 7>; + + trips { + cpu_alert2: trip0 { + temperature = <75000>; + hysteresis = <2000>; + type = "passive"; + }; + cpu_crit2: trip1 { + temperature = <110000>; + hysteresis = <2000>; + type = "critical"; + }; + }; + }; + + cpu3-thermal { + polling-delay-passive = <250>; + polling-delay = <1000>; + + thermal-sensors = <&tsens 8>; + + trips { + cpu_alert3: trip0 { + temperature = <75000>; + hysteresis = <2000>; + type = "passive"; + }; + cpu_crit3: trip1 { + temperature = <110000>; + hysteresis = <2000>; + type = "critical"; + }; + }; + }; + + q6-dsp-thermal { + polling-delay-passive = <250>; + polling-delay = <1000>; + + thermal-sensors = <&tsens 1>; + + trips { + q6_dsp_alert0: trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "hot"; }; + }; + }; - pm8841-regulators { - compatible = "qcom,rpm-pm8841-regulators"; - - pm8841_s1: s1 {}; - pm8841_s2: s2 {}; - pm8841_s3: s3 {}; - pm8841_s4: s4 {}; - pm8841_s5: s5 {}; - pm8841_s6: s6 {}; - pm8841_s7: s7 {}; - pm8841_s8: s8 {}; + modemtx-thermal { + polling-delay-passive = <250>; + polling-delay = <1000>; + + thermal-sensors = <&tsens 2>; + + trips { + modemtx_alert0: trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "hot"; }; + }; + }; + + video-thermal { + polling-delay-passive = <250>; + polling-delay = <1000>; - pm8941-regulators { - compatible = "qcom,rpm-pm8941-regulators"; - - pm8941_s1: s1 {}; - pm8941_s2: s2 {}; - pm8941_s3: s3 {}; - - pm8941_l1: l1 {}; - pm8941_l2: l2 {}; - pm8941_l3: l3 {}; - pm8941_l4: l4 {}; - pm8941_l5: l5 {}; - pm8941_l6: l6 {}; - pm8941_l7: l7 {}; - pm8941_l8: l8 {}; - pm8941_l9: l9 {}; - pm8941_l10: l10 {}; - pm8941_l11: l11 {}; - pm8941_l12: l12 {}; - pm8941_l13: l13 {}; - pm8941_l14: l14 {}; - pm8941_l15: l15 {}; - pm8941_l16: l16 {}; - pm8941_l17: l17 {}; - pm8941_l18: l18 {}; - pm8941_l19: l19 {}; - pm8941_l20: l20 {}; - pm8941_l21: l21 {}; - pm8941_l22: l22 {}; - pm8941_l23: l23 {}; - pm8941_l24: l24 {}; - - pm8941_lvs1: lvs1 {}; - pm8941_lvs2: lvs2 {}; - pm8941_lvs3: lvs3 {}; + thermal-sensors = <&tsens 3>; + + trips { + video_alert0: trip-point0 { + temperature = <95000>; + hysteresis = <2000>; + type = "hot"; + }; + }; + }; + + wlan-thermal { + polling-delay-passive = <250>; + polling-delay = <1000>; + + thermal-sensors = <&tsens 4>; + + trips { + wlan_alert0: trip-point0 { + temperature = <105000>; + hysteresis = <2000>; + type = "hot"; + }; + }; + }; + + gpu-top-thermal { + polling-delay-passive = <250>; + polling-delay = <1000>; + + thermal-sensors = <&tsens 9>; + + trips { + gpu1_alert0: trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "hot"; + }; + }; + }; + + gpu-bottom-thermal { + polling-delay-passive = <250>; + polling-delay = <1000>; + + thermal-sensors = <&tsens 10>; + + trips { + gpu2_alert0: trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "hot"; }; }; }; }; + timer { + compatible = "arm,armv7-timer"; + interrupts = <GIC_PPI 2 0xf08>, + <GIC_PPI 3 0xf08>, + <GIC_PPI 4 0xf08>, + <GIC_PPI 1 0xf08>; + clock-frequency = <19200000>; + }; + vreg_boost: vreg-boost { compatible = "regulator-fixed"; @@ -1692,6 +1865,7 @@ pinctrl-names = "default"; pinctrl-0 = <&boost_bypass_n_pin>; }; + vreg_vph_pwr: vreg-vph-pwr { compatible = "regulator-fixed"; regulator-name = "vph-pwr"; diff --git a/arch/arm/boot/dts/qcom-msm8974pro-fairphone-fp2.dts b/arch/arm/boot/dts/qcom-msm8974pro-fairphone-fp2.dts new file mode 100644 index 000000000000..58cb2ce1e4df --- /dev/null +++ b/arch/arm/boot/dts/qcom-msm8974pro-fairphone-fp2.dts @@ -0,0 +1,432 @@ +// SPDX-License-Identifier: GPL-2.0 +#include "qcom-msm8974pro.dtsi" +#include "qcom-pm8841.dtsi" +#include "qcom-pm8941.dtsi" +#include <dt-bindings/input/input.h> +#include <dt-bindings/pinctrl/qcom,pmic-gpio.h> + +/ { + model = "Fairphone 2"; + compatible = "fairphone,fp2", "qcom,msm8974"; + + aliases { + mmc0 = &sdhc_1; + mmc1 = &sdhc_2; + serial0 = &blsp1_uart2; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + gpio-keys { + compatible = "gpio-keys"; + + pinctrl-names = "default"; + pinctrl-0 = <&gpio_keys_pin_a>; + + camera-snapshot { + label = "camera_snapshot"; + gpios = <&pm8941_gpios 1 GPIO_ACTIVE_LOW>; + linux,code = <KEY_CAMERA>; + wakeup-source; + debounce-interval = <15>; + }; + + volume-down { + label = "volume_down"; + gpios = <&pm8941_gpios 2 GPIO_ACTIVE_LOW>; + linux,code = <KEY_VOLUMEDOWN>; + wakeup-source; + debounce-interval = <15>; + }; + + volume-up { + label = "volume_up"; + gpios = <&pm8941_gpios 5 GPIO_ACTIVE_LOW>; + linux,code = <KEY_VOLUMEUP>; + wakeup-source; + debounce-interval = <15>; + }; + }; + + vibrator { + compatible = "gpio-vibrator"; + enable-gpios = <&tlmm 86 GPIO_ACTIVE_HIGH>; + vcc-supply = <&pm8941_l18>; + }; +}; + +&blsp1_i2c2 { + status = "okay"; + + touchscreen@41 { + compatible = "ilitek,ili2120"; + reg = <0x41>; + interrupt-parent = <&tlmm>; + interrupts = <28 IRQ_TYPE_EDGE_FALLING>; + reset-gpios = <&tlmm 55 GPIO_ACTIVE_LOW>; + + touchscreen-size-x = <1080>; + touchscreen-size-y = <1920>; + }; +}; + +&blsp1_uart2 { + status = "okay"; +}; + +&imem { + reboot-mode { + mode-normal = <0x77665501>; + mode-bootloader = <0x77665500>; + mode-recovery = <0x77665502>; + }; +}; + +&otg { + status = "okay"; + + phys = <&usb_hs1_phy>; + phy-select = <&tcsr 0xb000 0>; + extcon = <&smbb>, <&usb_id>; + vbus-supply = <&chg_otg>; + + hnp-disable; + srp-disable; + adp-disable; + + ulpi { + phy@a { + status = "okay"; + + v1p8-supply = <&pm8941_l6>; + v3p3-supply = <&pm8941_l24>; + + extcon = <&smbb>; + qcom,init-seq = /bits/ 8 <0x1 0x64>; + }; + }; +}; + +&pm8941_gpios { + gpio_keys_pin_a: gpio-keys-active { + pins = "gpio1", "gpio2", "gpio5"; + function = "normal"; + + bias-pull-up; + power-source = <PM8941_GPIO_S3>; + }; +}; + +&pronto { + status = "okay"; + + vddmx-supply = <&pm8841_s1>; + vddcx-supply = <&pm8841_s2>; + vddpx-supply = <&pm8941_s3>; + + pinctrl-names = "default"; + pinctrl-0 = <&wcnss_pin_a>; + + iris { + vddxo-supply = <&pm8941_l6>; + vddrfa-supply = <&pm8941_l11>; + vddpa-supply = <&pm8941_l19>; + vdddig-supply = <&pm8941_s3>; + }; + + smd-edge { + qcom,remote-pid = <4>; + label = "pronto"; + + wcnss { + status = "okay"; + }; + }; +}; + +&remoteproc_adsp { + cx-supply = <&pm8841_s2>; +}; + +&remoteproc_mss { + cx-supply = <&pm8841_s2>; + mss-supply = <&pm8841_s3>; + mx-supply = <&pm8841_s1>; + pll-supply = <&pm8941_l12>; +}; + +&rpm_requests { + pm8841-regulators { + compatible = "qcom,rpm-pm8841-regulators"; + + pm8841_s1: s1 { + regulator-min-microvolt = <675000>; + regulator-max-microvolt = <1050000>; + }; + + pm8841_s2: s2 { + regulator-min-microvolt = <500000>; + regulator-max-microvolt = <1050000>; + }; + + pm8841_s3: s3 { + regulator-min-microvolt = <1050000>; + regulator-max-microvolt = <1050000>; + }; + }; + + pm8941-regulators { + compatible = "qcom,rpm-pm8941-regulators"; + + vdd_l1_l3-supply = <&pm8941_s1>; + vdd_l2_lvs1_2_3-supply = <&pm8941_s3>; + vdd_l4_l11-supply = <&pm8941_s1>; + vdd_l5_l7-supply = <&pm8941_s2>; + vdd_l6_l12_l14_l15-supply = <&pm8941_s2>; + vdd_l9_l10_l17_l22-supply = <&vreg_boost>; + vdd_l13_l20_l23_l24-supply = <&vreg_boost>; + vdd_l21-supply = <&vreg_boost>; + + pm8941_s1: s1 { + regulator-min-microvolt = <1300000>; + regulator-max-microvolt = <1300000>; + regulator-always-on; + regulator-boot-on; + }; + + pm8941_s2: s2 { + regulator-min-microvolt = <2150000>; + regulator-max-microvolt = <2150000>; + regulator-boot-on; + }; + + pm8941_s3: s3 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + regulator-boot-on; + }; + + pm8941_l1: l1 { + regulator-min-microvolt = <1225000>; + regulator-max-microvolt = <1225000>; + regulator-always-on; + regulator-boot-on; + }; + + pm8941_l2: l2 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + }; + + pm8941_l3: l3 { + regulator-min-microvolt = <1225000>; + regulator-max-microvolt = <1225000>; + }; + + pm8941_l4: l4 { + regulator-min-microvolt = <1225000>; + regulator-max-microvolt = <1225000>; + }; + + pm8941_l5: l5 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + pm8941_l6: l6 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-boot-on; + }; + + pm8941_l7: l7 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-boot-on; + }; + + pm8941_l8: l8 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + pm8941_l9: l9 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <2950000>; + }; + + pm8941_l10: l10 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <2950000>; + }; + + pm8941_l11: l11 { + regulator-min-microvolt = <1225000>; + regulator-max-microvolt = <1350000>; + }; + + pm8941_l12: l12 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + regulator-boot-on; + }; + + pm8941_l13: l13 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <2950000>; + regulator-boot-on; + }; + + pm8941_l14: l14 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + pm8941_l15: l15 { + regulator-min-microvolt = <2050000>; + regulator-max-microvolt = <2050000>; + }; + + pm8941_l16: l16 { + regulator-min-microvolt = <2700000>; + regulator-max-microvolt = <2700000>; + }; + + pm8941_l17: l17 { + regulator-min-microvolt = <2850000>; + regulator-max-microvolt = <2850000>; + }; + + pm8941_l18: l18 { + regulator-min-microvolt = <2850000>; + regulator-max-microvolt = <2850000>; + }; + + pm8941_l19: l19 { + regulator-min-microvolt = <2900000>; + regulator-max-microvolt = <3350000>; + }; + + pm8941_l20: l20 { + regulator-min-microvolt = <2950000>; + regulator-max-microvolt = <2950000>; + regulator-system-load = <200000>; + regulator-allow-set-load; + regulator-boot-on; + }; + + pm8941_l21: l21 { + regulator-min-microvolt = <2950000>; + regulator-max-microvolt = <2950000>; + regulator-boot-on; + }; + + pm8941_l22: l22 { + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3300000>; + }; + + pm8941_l23: l23 { + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + }; + + pm8941_l24: l24 { + regulator-min-microvolt = <3075000>; + regulator-max-microvolt = <3075000>; + regulator-boot-on; + }; + }; +}; + +&sdhc_1 { + status = "okay"; + + vmmc-supply = <&pm8941_l20>; + vqmmc-supply = <&pm8941_s3>; + + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&sdc1_on>; + pinctrl-1 = <&sdc1_off>; +}; + +&sdhc_2 { + status = "okay"; + + vmmc-supply = <&pm8941_l21>; + vqmmc-supply = <&pm8941_l13>; + + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&sdc2_on>; + pinctrl-1 = <&sdc2_off>; +}; + +&smbb { + usb-charge-current-limit = <1500000>; + qcom,fast-charge-safe-current = <1500000>; + qcom,fast-charge-current-limit = <1500000>; + qcom,fast-charge-safe-voltage = <4380000>; + qcom,fast-charge-high-threshold-voltage = <4350000>; + qcom,auto-recharge-threshold-voltage = <4240000>; + qcom,minimum-input-voltage = <4450000>; +}; + +&tlmm { + sdc1_on: sdc1-on { + clk { + pins = "sdc1_clk"; + drive-strength = <16>; + bias-disable; + }; + + cmd-data { + pins = "sdc1_cmd", "sdc1_data"; + drive-strength = <10>; + bias-pull-up; + }; + }; + + sdc2_on: sdc2-on { + clk { + pins = "sdc2_clk"; + drive-strength = <10>; + bias-disable; + }; + + cmd-data { + pins = "sdc2_cmd", "sdc2_data"; + drive-strength = <6>; + bias-pull-up; + }; + }; + + wcnss_pin_a: wcnss-pin-active { + wlan { + pins = "gpio36", "gpio37", "gpio38", "gpio39", "gpio40"; + function = "wlan"; + + drive-strength = <6>; + bias-pull-down; + }; + + bt { + pins = "gpio35", "gpio43", "gpio44"; + function = "bt"; + + drive-strength = <2>; + bias-pull-down; + }; + + fm { + pins = "gpio41", "gpio42"; + function = "fm"; + + drive-strength = <2>; + bias-pull-down; + }; + }; +}; diff --git a/arch/arm/boot/dts/qcom-msm8974pro-samsung-klte.dts b/arch/arm/boot/dts/qcom-msm8974pro-samsung-klte.dts new file mode 100644 index 000000000000..d6b2300a8223 --- /dev/null +++ b/arch/arm/boot/dts/qcom-msm8974pro-samsung-klte.dts @@ -0,0 +1,813 @@ +// SPDX-License-Identifier: GPL-2.0 +#include "qcom-msm8974pro.dtsi" +#include "qcom-pma8084.dtsi" +#include <dt-bindings/input/input.h> +#include <dt-bindings/pinctrl/qcom,pmic-gpio.h> +#include <dt-bindings/leds/common.h> + +/ { + model = "Samsung Galaxy S5"; + compatible = "samsung,klte", "qcom,msm8974"; + + aliases { + serial0 = &blsp1_uart1; + mmc0 = &sdhc_1; /* SDC1 eMMC slot */ + mmc1 = &sdhc_3; /* SDC2 SD card slot */ + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + gpio-keys { + compatible = "gpio-keys"; + + pinctrl-names = "default"; + pinctrl-0 = <&gpio_keys_pin_a>; + + volume-down { + label = "volume_down"; + gpios = <&pma8084_gpios 2 GPIO_ACTIVE_LOW>; + linux,input-type = <1>; + linux,code = <KEY_VOLUMEDOWN>; + debounce-interval = <15>; + }; + + home-key { + label = "home_key"; + gpios = <&pma8084_gpios 3 GPIO_ACTIVE_LOW>; + linux,input-type = <1>; + linux,code = <KEY_HOMEPAGE>; + wakeup-source; + debounce-interval = <15>; + }; + + volume-up { + label = "volume_up"; + gpios = <&pma8084_gpios 5 GPIO_ACTIVE_LOW>; + linux,input-type = <1>; + linux,code = <KEY_VOLUMEUP>; + debounce-interval = <15>; + }; + }; + + i2c-gpio-touchkey { + compatible = "i2c-gpio"; + #address-cells = <1>; + #size-cells = <0>; + sda-gpios = <&tlmm 95 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; + scl-gpios = <&tlmm 96 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; + pinctrl-names = "default"; + pinctrl-0 = <&i2c_touchkey_pins>; + + touchkey@20 { + compatible = "cypress,tm2-touchkey"; + reg = <0x20>; + + interrupt-parent = <&pma8084_gpios>; + interrupts = <6 IRQ_TYPE_EDGE_FALLING>; + pinctrl-names = "default"; + pinctrl-0 = <&touchkey_pin>; + + vcc-supply = <&max77826_ldo15>; + vdd-supply = <&pma8084_l19>; + + linux,keycodes = <KEY_APPSELECT KEY_BACK>; + }; + }; + + i2c-gpio-led { + compatible = "i2c-gpio"; + #address-cells = <1>; + #size-cells = <0>; + scl-gpios = <&tlmm 121 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; + sda-gpios = <&tlmm 120 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; + pinctrl-names = "default"; + pinctrl-0 = <&i2c_led_gpioex_pins>; + + i2c-gpio,delay-us = <2>; + + gpio_expander: gpio@20 { + compatible = "nxp,pcal6416"; + reg = <0x20>; + + gpio-controller; + #gpio-cells = <2>; + + vcc-supply = <&pma8084_s4>; + + pinctrl-names = "default"; + pinctrl-0 = <&gpioex_pin>; + + reset-gpios = <&tlmm 145 GPIO_ACTIVE_LOW>; + }; + + led-controller@30 { + compatible = "panasonic,an30259a"; + reg = <0x30>; + + #address-cells = <1>; + #size-cells = <0>; + + led@1 { + reg = <1>; + function = LED_FUNCTION_STATUS; + color = <LED_COLOR_ID_RED>; + }; + + led@2 { + reg = <2>; + function = LED_FUNCTION_STATUS; + color = <LED_COLOR_ID_GREEN>; + }; + + led@3 { + reg = <3>; + function = LED_FUNCTION_STATUS; + color = <LED_COLOR_ID_BLUE>; + }; + }; + }; + + vreg_wlan: wlan-regulator { + compatible = "regulator-fixed"; + + regulator-name = "wl-reg"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + + gpio = <&gpio_expander 8 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; + + vreg_panel: panel-regulator { + compatible = "regulator-fixed"; + + pinctrl-names = "default"; + pinctrl-0 = <&panel_en_pin>; + + regulator-name = "panel-vddr-reg"; + regulator-min-microvolt = <1500000>; + regulator-max-microvolt = <1500000>; + + gpio = <&pma8084_gpios 14 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; + + /delete-node/ vreg-boost; +}; + +&blsp1_i2c2 { + status = "okay"; + + touchscreen@20 { + compatible = "syna,rmi4-i2c"; + reg = <0x20>; + + interrupt-parent = <&pma8084_gpios>; + interrupts = <8 IRQ_TYPE_EDGE_FALLING>; + + vdd-supply = <&max77826_ldo13>; + vio-supply = <&pma8084_lvs2>; + + pinctrl-names = "default"; + pinctrl-0 = <&touch_pin>; + + syna,startup-delay-ms = <100>; + + #address-cells = <1>; + #size-cells = <0>; + + rmi4-f01@1 { + reg = <0x1>; + syna,nosleep-mode = <1>; + }; + + rmi4-f12@12 { + reg = <0x12>; + syna,sensor-type = <1>; + }; + }; +}; + +&blsp1_i2c6 { + status = "okay"; + + pmic@60 { + reg = <0x60>; + compatible = "maxim,max77826"; + + regulators { + max77826_ldo1: LDO1 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + }; + + max77826_ldo2: LDO2 { + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1000000>; + }; + + max77826_ldo3: LDO3 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + }; + + max77826_ldo4: LDO4 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + max77826_ldo5: LDO5 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + max77826_ldo6: LDO6 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + }; + + max77826_ldo7: LDO7 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + max77826_ldo8: LDO8 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + }; + + max77826_ldo9: LDO9 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + max77826_ldo10: LDO10 { + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2950000>; + }; + + max77826_ldo11: LDO11 { + regulator-min-microvolt = <2700000>; + regulator-max-microvolt = <2950000>; + }; + + max77826_ldo12: LDO12 { + regulator-min-microvolt = <2500000>; + regulator-max-microvolt = <3300000>; + }; + + max77826_ldo13: LDO13 { + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; + + max77826_ldo14: LDO14 { + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; + + max77826_ldo15: LDO15 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + max77826_buck: BUCK { + regulator-min-microvolt = <1225000>; + regulator-max-microvolt = <1225000>; + }; + + max77826_buckboost: BUCKBOOST { + regulator-min-microvolt = <3400000>; + regulator-max-microvolt = <3400000>; + }; + }; + }; +}; + +&blsp1_uart2 { + status = "okay"; +}; + +&blsp2_i2c6 { + status = "okay"; + + fuelgauge@36 { + compatible = "maxim,max17048"; + reg = <0x36>; + + maxim,double-soc; + maxim,rcomp = /bits/ 8 <0x56>; + + interrupt-parent = <&pma8084_gpios>; + interrupts = <21 IRQ_TYPE_LEVEL_LOW>; + + pinctrl-names = "default"; + pinctrl-0 = <&fuelgauge_pin>; + }; +}; + +&blsp2_uart2 { + status = "okay"; + + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&blsp2_uart2_pins_active>; + pinctrl-1 = <&blsp2_uart2_pins_sleep>; + + bluetooth { + compatible = "brcm,bcm43540-bt"; + max-speed = <3000000>; + pinctrl-names = "default"; + pinctrl-0 = <&bt_pins>; + device-wakeup-gpios = <&tlmm 91 GPIO_ACTIVE_HIGH>; + shutdown-gpios = <&gpio_expander 9 GPIO_ACTIVE_HIGH>; + interrupt-parent = <&tlmm>; + interrupts = <75 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "host-wakeup"; + }; +}; + +&dsi0 { + status = "okay"; + + vdda-supply = <&pma8084_l2>; + vdd-supply = <&pma8084_l22>; + vddio-supply = <&pma8084_l12>; + + panel: panel@0 { + reg = <0>; + compatible = "samsung,s6e3fa2"; + + pinctrl-names = "default"; + pinctrl-0 = <&panel_te_pin &panel_rst_pin>; + + iovdd-supply = <&pma8084_lvs4>; + vddr-supply = <&vreg_panel>; + + reset-gpios = <&pma8084_gpios 17 GPIO_ACTIVE_LOW>; + te-gpios = <&tlmm 12 GPIO_ACTIVE_HIGH>; + + port { + panel_in: endpoint { + remote-endpoint = <&dsi0_out>; + }; + }; + }; +}; + +&dsi0_out { + remote-endpoint = <&panel_in>; + data-lanes = <0 1 2 3>; +}; + +&dsi0_phy { + status = "okay"; + + vddio-supply = <&pma8084_l12>; +}; + +&gpu { + status = "okay"; +}; + +&mdss { + status = "okay"; +}; + +&otg { + status = "okay"; + + phys = <&usb_hs1_phy>; + phy-select = <&tcsr 0xb000 0>; + + hnp-disable; + srp-disable; + adp-disable; + + ulpi { + phy@a { + status = "okay"; + + v1p8-supply = <&pma8084_l6>; + v3p3-supply = <&pma8084_l24>; + + qcom,init-seq = /bits/ 8 <0x1 0x64>; + }; + }; +}; + +&pma8084_gpios { + gpio_keys_pin_a: gpio-keys-active { + pins = "gpio2", "gpio3", "gpio5"; + function = "normal"; + + bias-pull-up; + power-source = <PMA8084_GPIO_S4>; + }; + + touchkey_pin: touchkey-int-pin { + pins = "gpio6"; + function = "normal"; + bias-disable; + input-enable; + power-source = <PMA8084_GPIO_S4>; + }; + + touch_pin: touchscreen-int-pin { + pins = "gpio8"; + function = "normal"; + bias-disable; + input-enable; + power-source = <PMA8084_GPIO_S4>; + }; + + panel_en_pin: panel-en-pin { + pins = "gpio14"; + function = "normal"; + bias-pull-up; + power-source = <PMA8084_GPIO_S4>; + qcom,drive-strength = <PMIC_GPIO_STRENGTH_LOW>; + }; + + wlan_sleep_clk_pin: wlan-sleep-clk-pin { + pins = "gpio16"; + function = "func2"; + + output-high; + power-source = <PMA8084_GPIO_S4>; + qcom,drive-strength = <PMIC_GPIO_STRENGTH_HIGH>; + }; + + panel_rst_pin: panel-rst-pin { + pins = "gpio17"; + function = "normal"; + bias-disable; + power-source = <PMA8084_GPIO_S4>; + qcom,drive-strength = <PMIC_GPIO_STRENGTH_LOW>; + }; + + fuelgauge_pin: fuelgauge-int-pin { + pins = "gpio21"; + function = "normal"; + bias-disable; + input-enable; + power-source = <PMA8084_GPIO_S4>; + }; +}; + +&remoteproc_adsp { + cx-supply = <&pma8084_s2>; +}; + +&remoteproc_mss { + cx-supply = <&pma8084_s2>; + mss-supply = <&pma8084_s6>; + mx-supply = <&pma8084_s1>; + pll-supply = <&pma8084_l12>; +}; + +&rpm_requests { + pma8084-regulators { + compatible = "qcom,rpm-pma8084-regulators"; + + pma8084_s1: s1 { + regulator-min-microvolt = <675000>; + regulator-max-microvolt = <1050000>; + regulator-always-on; + }; + + pma8084_s2: s2 { + regulator-min-microvolt = <500000>; + regulator-max-microvolt = <1050000>; + }; + + pma8084_s3: s3 { + regulator-min-microvolt = <1300000>; + regulator-max-microvolt = <1300000>; + }; + + pma8084_s4: s4 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + pma8084_s5: s5 { + regulator-min-microvolt = <2150000>; + regulator-max-microvolt = <2150000>; + }; + + pma8084_s6: s6 { + regulator-min-microvolt = <1050000>; + regulator-max-microvolt = <1050000>; + }; + + pma8084_l1: l1 { + regulator-min-microvolt = <1225000>; + regulator-max-microvolt = <1225000>; + }; + + pma8084_l2: l2 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + }; + + pma8084_l3: l3 { + regulator-min-microvolt = <1050000>; + regulator-max-microvolt = <1200000>; + }; + + pma8084_l4: l4 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1225000>; + }; + + pma8084_l5: l5 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + pma8084_l6: l6 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + pma8084_l7: l7 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + pma8084_l8: l8 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + pma8084_l9: l9 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <2950000>; + }; + + pma8084_l10: l10 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <2950000>; + }; + + pma8084_l11: l11 { + regulator-min-microvolt = <1300000>; + regulator-max-microvolt = <1300000>; + }; + + pma8084_l12: l12 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + }; + + pma8084_l13: l13 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <2950000>; + }; + + pma8084_l14: l14 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + pma8084_l15: l15 { + regulator-min-microvolt = <2050000>; + regulator-max-microvolt = <2050000>; + }; + + pma8084_l16: l16 { + regulator-min-microvolt = <2700000>; + regulator-max-microvolt = <2700000>; + }; + + pma8084_l17: l17 { + regulator-min-microvolt = <2850000>; + regulator-max-microvolt = <2850000>; + }; + + pma8084_l18: l18 { + regulator-min-microvolt = <2850000>; + regulator-max-microvolt = <2850000>; + }; + + pma8084_l19: l19 { + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; + + pma8084_l20: l20 { + regulator-min-microvolt = <2950000>; + regulator-max-microvolt = <2950000>; + regulator-system-load = <200000>; + regulator-allow-set-load; + }; + + pma8084_l21: l21 { + regulator-min-microvolt = <2950000>; + regulator-max-microvolt = <2950000>; + regulator-system-load = <200000>; + regulator-allow-set-load; + }; + + pma8084_l22: l22 { + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3300000>; + }; + + pma8084_l23: l23 { + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + }; + + pma8084_l24: l24 { + regulator-min-microvolt = <3075000>; + regulator-max-microvolt = <3075000>; + }; + + pma8084_l25: l25 { + regulator-min-microvolt = <2100000>; + regulator-max-microvolt = <2100000>; + }; + + pma8084_l26: l26 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <2050000>; + }; + + pma8084_l27: l27 { + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1225000>; + }; + + pma8084_lvs1: lvs1 {}; + pma8084_lvs2: lvs2 {}; + pma8084_lvs3: lvs3 {}; + pma8084_lvs4: lvs4 {}; + + pma8084_5vs1: 5vs1 {}; + }; +}; + +&sdhc_1 { + status = "okay"; + + vmmc-supply = <&pma8084_l20>; + vqmmc-supply = <&pma8084_s4>; + + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&sdc1_on>; + pinctrl-1 = <&sdc1_off>; +}; + +&sdhc_2 { + status = "okay"; + max-frequency = <100000000>; + vmmc-supply = <&vreg_wlan>; + vqmmc-supply = <&pma8084_s4>; + non-removable; + + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&sdc2_on>; + pinctrl-1 = <&sdc2_off>; + + wifi@1 { + reg = <1>; + compatible = "brcm,bcm4329-fmac"; + + interrupt-parent = <&tlmm>; + interrupts = <92 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "host-wake"; + + pinctrl-names = "default"; + pinctrl-0 = <&wlan_sleep_clk_pin &wifi_pin>; + }; +}; + +&sdhc_3 { + status = "okay"; + max-frequency = <100000000>; + vmmc-supply = <&pma8084_l21>; + vqmmc-supply = <&pma8084_l13>; + + /* + * cd-gpio is intentionally disabled. If enabled, an SD card + * present during boot is not initialized correctly. Without + * cd-gpios the driver resorts to polling, so hotplug works. + */ + pinctrl-names = "default"; + pinctrl-0 = <&sdc3_on /* &sdhc3_cd_pin */>; + /* cd-gpios = <&tlmm 62 GPIO_ACTIVE_LOW>; */ +}; + +&tlmm { + /* This seems suspicious, but somebody with this device should look into it. */ + blsp2_uart2_pins_active: blsp2-uart2-pins-active { + pins = "gpio45", "gpio46", "gpio47", "gpio48"; + function = "blsp_uart8"; + drive-strength = <8>; + bias-disable; + }; + + blsp2_uart2_pins_sleep: blsp2-uart2-pins-sleep { + pins = "gpio45", "gpio46", "gpio47", "gpio48"; + function = "gpio"; + drive-strength = <2>; + bias-pull-down; + }; + + bt_pins: bt-pins { + hostwake { + pins = "gpio75"; + function = "gpio"; + drive-strength = <16>; + input-enable; + }; + + devwake { + pins = "gpio91"; + function = "gpio"; + drive-strength = <2>; + }; + }; + + sdc1_on: sdhc1-on { + clk { + pins = "sdc1_clk"; + drive-strength = <4>; + bias-disable; + }; + + cmd-data { + pins = "sdc1_cmd", "sdc1_data"; + drive-strength = <4>; + bias-pull-up; + }; + }; + + sdc3_on: sdc3-on { + pins = "gpio35", "gpio36", "gpio37", "gpio38", "gpio39", "gpio40"; + function = "sdc3"; + drive-strength = <8>; + bias-disable; + }; + + sdhc3_cd_pin: sdc3-cd-on { + pins = "gpio62"; + function = "gpio"; + + drive-strength = <2>; + bias-disable; + }; + + sdc2_on: sdhc2-on { + clk { + pins = "sdc2_clk"; + drive-strength = <6>; + bias-disable; + }; + + cmd-data { + pins = "sdc2_cmd", "sdc2_data"; + drive-strength = <6>; + bias-pull-up; + }; + }; + + i2c_touchkey_pins: i2c-touchkey { + pins = "gpio95", "gpio96"; + function = "gpio"; + input-enable; + bias-pull-up; + }; + + i2c_led_gpioex_pins: i2c-led-gpioex { + pins = "gpio120", "gpio121"; + function = "gpio"; + input-enable; + bias-pull-down; + }; + + gpioex_pin: gpioex { + pins = "gpio145"; + function = "gpio"; + bias-pull-up; + drive-strength = <2>; + }; + + wifi_pin: wifi { + pins = "gpio92"; + function = "gpio"; + input-enable; + bias-pull-down; + }; + + panel_te_pin: panel { + pins = "gpio12"; + function = "mdp_vsync"; + drive-strength = <2>; + bias-disable; + }; +}; diff --git a/arch/arm/boot/dts/qcom-msm8974pro-sony-xperia-shinano-castor.dts b/arch/arm/boot/dts/qcom-msm8974pro-sony-xperia-shinano-castor.dts new file mode 100644 index 000000000000..9bd8faea61a5 --- /dev/null +++ b/arch/arm/boot/dts/qcom-msm8974pro-sony-xperia-shinano-castor.dts @@ -0,0 +1,608 @@ +// SPDX-License-Identifier: GPL-2.0 +#include "qcom-msm8974pro.dtsi" +#include "qcom-pm8841.dtsi" +#include "qcom-pm8941.dtsi" +#include <dt-bindings/input/input.h> +#include <dt-bindings/pinctrl/qcom,pmic-gpio.h> + +/ { + model = "Sony Xperia Z2 Tablet"; + compatible = "sony,xperia-castor", "qcom,msm8974"; + + aliases { + serial0 = &blsp1_uart2; + serial1 = &blsp2_uart1; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + gpio-keys { + compatible = "gpio-keys"; + + pinctrl-names = "default"; + pinctrl-0 = <&gpio_keys_pin_a>; + + volume-down { + label = "volume_down"; + gpios = <&pm8941_gpios 2 GPIO_ACTIVE_LOW>; + linux,input-type = <1>; + linux,code = <KEY_VOLUMEDOWN>; + }; + + camera-snapshot { + label = "camera_snapshot"; + gpios = <&pm8941_gpios 3 GPIO_ACTIVE_LOW>; + linux,input-type = <1>; + linux,code = <KEY_CAMERA>; + }; + + camera-focus { + label = "camera_focus"; + gpios = <&pm8941_gpios 4 GPIO_ACTIVE_LOW>; + linux,input-type = <1>; + linux,code = <KEY_CAMERA_FOCUS>; + }; + + volume-up { + label = "volume_up"; + gpios = <&pm8941_gpios 5 GPIO_ACTIVE_LOW>; + linux,input-type = <1>; + linux,code = <KEY_VOLUMEUP>; + }; + }; + + vreg_bl_vddio: lcd-backlight-vddio { + compatible = "regulator-fixed"; + regulator-name = "vreg_bl_vddio"; + regulator-min-microvolt = <3150000>; + regulator-max-microvolt = <3150000>; + + gpio = <&tlmm 69 0>; + enable-active-high; + + vin-supply = <&pm8941_s3>; + startup-delay-us = <70000>; + + pinctrl-names = "default"; + pinctrl-0 = <&lcd_backlight_en_pin_a>; + }; + + vreg_vsp: lcd-dcdc-regulator { + compatible = "regulator-fixed"; + regulator-name = "vreg_vsp"; + regulator-min-microvolt = <5600000>; + regulator-max-microvolt = <5600000>; + + gpio = <&pm8941_gpios 20 GPIO_ACTIVE_HIGH>; + enable-active-high; + + pinctrl-names = "default"; + pinctrl-0 = <&lcd_dcdc_en_pin_a>; + }; + + vreg_wlan: wlan-regulator { + compatible = "regulator-fixed"; + + regulator-name = "wl-reg"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + + gpio = <&pm8941_gpios 18 GPIO_ACTIVE_HIGH>; + enable-active-high; + + pinctrl-names = "default"; + pinctrl-0 = <&wlan_regulator_pin>; + }; +}; + +&blsp1_uart2 { + status = "okay"; +}; + +&blsp2_i2c2 { + status = "okay"; + clock-frequency = <355000>; + + synaptics@2c { + compatible = "syna,rmi4-i2c"; + reg = <0x2c>; + + interrupt-parent = <&tlmm>; + interrupts = <86 IRQ_TYPE_EDGE_FALLING>; + + #address-cells = <1>; + #size-cells = <0>; + + vdd-supply = <&pm8941_l22>; + vio-supply = <&pm8941_lvs3>; + + pinctrl-names = "default"; + pinctrl-0 = <&ts_int_pin>; + + syna,startup-delay-ms = <10>; + + rmi-f01@1 { + reg = <0x1>; + syna,nosleep = <1>; + }; + + rmi-f11@11 { + reg = <0x11>; + syna,f11-flip-x = <1>; + syna,sensor-type = <1>; + }; + }; +}; + +&blsp2_i2c5 { + status = "okay"; + clock-frequency = <355000>; + + lp8566_wled: backlight@2c { + compatible = "ti,lp8556"; + reg = <0x2c>; + power-supply = <&vreg_bl_vddio>; + + bl-name = "backlight"; + dev-ctrl = /bits/ 8 <0x05>; + init-brt = /bits/ 8 <0x3f>; + rom_a0h { + rom-addr = /bits/ 8 <0xa0>; + rom-val = /bits/ 8 <0xff>; + }; + rom_a1h { + rom-addr = /bits/ 8 <0xa1>; + rom-val = /bits/ 8 <0x3f>; + }; + rom_a2h { + rom-addr = /bits/ 8 <0xa2>; + rom-val = /bits/ 8 <0x20>; + }; + rom_a3h { + rom-addr = /bits/ 8 <0xa3>; + rom-val = /bits/ 8 <0x5e>; + }; + rom_a4h { + rom-addr = /bits/ 8 <0xa4>; + rom-val = /bits/ 8 <0x02>; + }; + rom_a5h { + rom-addr = /bits/ 8 <0xa5>; + rom-val = /bits/ 8 <0x04>; + }; + rom_a6h { + rom-addr = /bits/ 8 <0xa6>; + rom-val = /bits/ 8 <0x80>; + }; + rom_a7h { + rom-addr = /bits/ 8 <0xa7>; + rom-val = /bits/ 8 <0xf7>; + }; + rom_a9h { + rom-addr = /bits/ 8 <0xa9>; + rom-val = /bits/ 8 <0x80>; + }; + rom_aah { + rom-addr = /bits/ 8 <0xaa>; + rom-val = /bits/ 8 <0x0f>; + }; + rom_aeh { + rom-addr = /bits/ 8 <0xae>; + rom-val = /bits/ 8 <0x0f>; + }; + }; +}; + +&blsp2_uart1 { + status = "okay"; + + bluetooth { + compatible = "brcm,bcm43438-bt"; + max-speed = <3000000>; + + pinctrl-names = "default"; + pinctrl-0 = <&bt_host_wake_pin>, <&bt_dev_wake_pin>, <&bt_reg_on_pin>; + + host-wakeup-gpios = <&tlmm 95 GPIO_ACTIVE_HIGH>; + device-wakeup-gpios = <&tlmm 96 GPIO_ACTIVE_HIGH>; + shutdown-gpios = <&pm8941_gpios 16 GPIO_ACTIVE_HIGH>; + }; +}; + +&otg { + status = "okay"; + + phys = <&usb_hs1_phy>; + phy-select = <&tcsr 0xb000 0>; + extcon = <&smbb>, <&usb_id>; + vbus-supply = <&chg_otg>; + + hnp-disable; + srp-disable; + adp-disable; + + ulpi { + phy@a { + status = "okay"; + + v1p8-supply = <&pm8941_l6>; + v3p3-supply = <&pm8941_l24>; + + extcon = <&smbb>; + qcom,init-seq = /bits/ 8 <0x1 0x64>; + }; + }; +}; + +&pm8941_coincell { + status = "okay"; + + qcom,rset-ohms = <2100>; + qcom,vset-millivolts = <3000>; +}; + +&pm8941_gpios { + gpio_keys_pin_a: gpio-keys-active { + pins = "gpio2", "gpio5"; + function = "normal"; + + bias-pull-up; + power-source = <PM8941_GPIO_S3>; + }; + + bt_reg_on_pin: bt-reg-on { + pins = "gpio16"; + function = "normal"; + + output-low; + power-source = <PM8941_GPIO_S3>; + }; + + wlan_sleep_clk_pin: wl-sleep-clk { + pins = "gpio17"; + function = "func2"; + + output-high; + power-source = <PM8941_GPIO_S3>; + }; + + wlan_regulator_pin: wl-reg-active { + pins = "gpio18"; + function = "normal"; + + bias-disable; + power-source = <PM8941_GPIO_S3>; + }; + + lcd_dcdc_en_pin_a: lcd-dcdc-en-active { + pins = "gpio20"; + function = "normal"; + + bias-disable; + power-source = <PM8941_GPIO_S3>; + input-disable; + output-low; + }; + +}; + +&rpm_requests { + pm8941-regulators { + compatible = "qcom,rpm-pm8941-regulators"; + + vdd_l1_l3-supply = <&pm8941_s1>; + vdd_l2_lvs1_2_3-supply = <&pm8941_s3>; + vdd_l4_l11-supply = <&pm8941_s1>; + vdd_l5_l7-supply = <&pm8941_s2>; + vdd_l6_l12_l14_l15-supply = <&pm8941_s2>; + vdd_l9_l10_l17_l22-supply = <&vreg_boost>; + vdd_l13_l20_l23_l24-supply = <&vreg_boost>; + vdd_l21-supply = <&vreg_boost>; + + pm8941_s1: s1 { + regulator-min-microvolt = <1300000>; + regulator-max-microvolt = <1300000>; + regulator-always-on; + regulator-boot-on; + }; + + pm8941_s2: s2 { + regulator-min-microvolt = <2150000>; + regulator-max-microvolt = <2150000>; + regulator-boot-on; + }; + + pm8941_s3: s3 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-system-load = <154000>; + regulator-always-on; + regulator-boot-on; + }; + + pm8941_s4: s4 { + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + }; + + pm8941_l1: l1 { + regulator-min-microvolt = <1225000>; + regulator-max-microvolt = <1225000>; + regulator-always-on; + regulator-boot-on; + }; + + pm8941_l2: l2 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + }; + + pm8941_l3: l3 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + }; + + pm8941_l4: l4 { + regulator-min-microvolt = <1225000>; + regulator-max-microvolt = <1225000>; + }; + + pm8941_l5: l5 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + pm8941_l6: l6 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-boot-on; + }; + + pm8941_l7: l7 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-boot-on; + }; + + pm8941_l8: l8 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + pm8941_l9: l9 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <2950000>; + }; + + pm8941_l11: l11 { + regulator-min-microvolt = <1300000>; + regulator-max-microvolt = <1350000>; + }; + + pm8941_l12: l12 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + regulator-boot-on; + }; + + pm8941_l13: l13 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <2950000>; + regulator-boot-on; + }; + + pm8941_l14: l14 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + pm8941_l15: l15 { + regulator-min-microvolt = <2050000>; + regulator-max-microvolt = <2050000>; + }; + + pm8941_l16: l16 { + regulator-min-microvolt = <2700000>; + regulator-max-microvolt = <2700000>; + }; + + pm8941_l17: l17 { + regulator-min-microvolt = <2700000>; + regulator-max-microvolt = <2700000>; + }; + + pm8941_l18: l18 { + regulator-min-microvolt = <2850000>; + regulator-max-microvolt = <2850000>; + }; + + pm8941_l19: l19 { + regulator-min-microvolt = <2850000>; + regulator-max-microvolt = <2850000>; + }; + + pm8941_l20: l20 { + regulator-min-microvolt = <2950000>; + regulator-max-microvolt = <2950000>; + regulator-system-load = <500000>; + regulator-allow-set-load; + regulator-boot-on; + }; + + pm8941_l21: l21 { + regulator-min-microvolt = <2950000>; + regulator-max-microvolt = <2950000>; + regulator-boot-on; + }; + + pm8941_l22: l22 { + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + }; + + pm8941_l23: l23 { + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + }; + + pm8941_l24: l24 { + regulator-min-microvolt = <3075000>; + regulator-max-microvolt = <3075000>; + regulator-boot-on; + }; + + pm8941_lvs3: lvs3 {}; + }; +}; + +&sdhc_1 { + status = "okay"; + + vmmc-supply = <&pm8941_l20>; + vqmmc-supply = <&pm8941_s3>; + + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&sdc1_on>; + pinctrl-1 = <&sdc1_off>; +}; + +&sdhc_2 { + status = "okay"; + + vmmc-supply = <&pm8941_l21>; + vqmmc-supply = <&pm8941_l13>; + + cd-gpios = <&tlmm 62 GPIO_ACTIVE_LOW>; + + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&sdc2_on>; + pinctrl-1 = <&sdc2_off>; +}; + +&sdhc_3 { + status = "okay"; + + max-frequency = <100000000>; + vmmc-supply = <&vreg_wlan>; + non-removable; + + pinctrl-names = "default"; + pinctrl-0 = <&sdc3_on>; + + #address-cells = <1>; + #size-cells = <0>; + + bcrmf@1 { + compatible = "brcm,bcm4339-fmac", "brcm,bcm4329-fmac"; + reg = <1>; + + brcm,drive-strength = <10>; + + pinctrl-names = "default"; + pinctrl-0 = <&wlan_sleep_clk_pin>; + }; +}; + +&smbb { + qcom,fast-charge-safe-current = <1500000>; + qcom,fast-charge-current-limit = <1500000>; + qcom,dc-current-limit = <1800000>; + qcom,fast-charge-safe-voltage = <4400000>; + qcom,fast-charge-high-threshold-voltage = <4350000>; + qcom,fast-charge-low-threshold-voltage = <3400000>; + qcom,auto-recharge-threshold-voltage = <4200000>; + qcom,minimum-input-voltage = <4300000>; +}; + +&tlmm { + lcd_backlight_en_pin_a: lcd-backlight-vddio { + pins = "gpio69"; + drive-strength = <10>; + output-low; + bias-disable; + }; + + sdc1_on: sdc1-on { + clk { + pins = "sdc1_clk"; + drive-strength = <16>; + bias-disable; + }; + + cmd-data { + pins = "sdc1_cmd", "sdc1_data"; + drive-strength = <10>; + bias-pull-up; + }; + }; + + sdc2_on: sdc2-on { + clk { + pins = "sdc2_clk"; + drive-strength = <6>; + bias-disable; + }; + + cmd-data { + pins = "sdc2_cmd", "sdc2_data"; + drive-strength = <6>; + bias-pull-up; + }; + + cd { + pins = "gpio62"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + }; + }; + + sdc3_on: sdc3-on { + clk { + pins = "gpio40"; + function = "sdc3"; + drive-strength = <10>; + bias-disable; + }; + + cmd { + pins = "gpio39"; + function = "sdc3"; + drive-strength = <10>; + bias-pull-up; + }; + + data { + pins = "gpio35", "gpio36", "gpio37", "gpio38"; + function = "sdc3"; + drive-strength = <10>; + bias-pull-up; + }; + }; + + ts_int_pin: ts-int-pin { + pins = "gpio86"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + input-enable; + }; + + bt_host_wake_pin: bt-host-wake { + pins = "gpio95"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + output-low; + }; + + bt_dev_wake_pin: bt-dev-wake { + pins = "gpio96"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + }; +}; diff --git a/arch/arm/boot/dts/qcom-msm8974pro.dtsi b/arch/arm/boot/dts/qcom-msm8974pro.dtsi index b64c28036dd0..1e882e16a221 100644 --- a/arch/arm/boot/dts/qcom-msm8974pro.dtsi +++ b/arch/arm/boot/dts/qcom-msm8974pro.dtsi @@ -1,23 +1,19 @@ +// SPDX-License-Identifier: GPL-2.0 #include "qcom-msm8974.dtsi" -/ { - soc { - sdhci@f9824900 { - clocks = <&gcc GCC_SDCC1_APPS_CLK>, - <&gcc GCC_SDCC1_AHB_CLK>, - <&xo_board>, - <&gcc GCC_SDCC1_CDCCAL_FF_CLK>, - <&gcc GCC_SDCC1_CDCCAL_SLEEP_CLK>; - clock-names = "core", "iface", "xo", "cal", "sleep"; - }; +&gcc { + compatible = "qcom,gcc-msm8974pro"; +}; - clock-controller@fc400000 { - compatible = "qcom,gcc-msm8974pro"; - }; +&gpu { + compatible = "qcom,adreno-330.2", "qcom,adreno"; +}; - adreno@fdb00000 { - compatible = "qcom,adreno-330.2", - "qcom,adreno"; - }; - }; +&sdhc_1 { + clocks = <&gcc GCC_SDCC1_APPS_CLK>, + <&gcc GCC_SDCC1_AHB_CLK>, + <&xo_board>, + <&gcc GCC_SDCC1_CDCCAL_FF_CLK>, + <&gcc GCC_SDCC1_CDCCAL_SLEEP_CLK>; + clock-names = "core", "iface", "xo", "cal", "sleep"; }; diff --git a/arch/arm/boot/dts/qcom-pm8226.dtsi b/arch/arm/boot/dts/qcom-pm8226.dtsi index b3d0f7b5874d..9b7d9d04ded6 100644 --- a/arch/arm/boot/dts/qcom-pm8226.dtsi +++ b/arch/arm/boot/dts/qcom-pm8226.dtsi @@ -1,6 +1,7 @@ // SPDX-License-Identifier: BSD-3-Clause #include <dt-bindings/interrupt-controller/irq.h> #include <dt-bindings/spmi/spmi.h> +#include <dt-bindings/iio/qcom,spmi-vadc.h> &spmi_bus { pm8226_0: pm8226@0 { @@ -40,6 +41,46 @@ chg_otg: otg-vbus { }; }; + rtc@6000 { + compatible = "qcom,pm8941-rtc"; + reg = <0x6000>, <0x6100>; + reg-names = "rtc", "alarm"; + interrupts = <0x0 0x61 0x1 IRQ_TYPE_EDGE_RISING>; + }; + + pm8226_vadc: adc@3100 { + compatible = "qcom,spmi-vadc"; + reg = <0x3100>; + interrupts = <0x0 0x31 0x0 IRQ_TYPE_EDGE_RISING>; + #address-cells = <1>; + #size-cells = <0>; + #io-channel-cells = <1>; + + adc-chan@7 { + reg = <VADC_VSYS>; + qcom,pre-scaling = <1 3>; + label = "vph_pwr"; + }; + adc-chan@8 { + reg = <VADC_DIE_TEMP>; + label = "die_temp"; + }; + adc-chan@9 { + reg = <VADC_REF_625MV>; + label = "ref_625mv"; + }; + adc-chan@a { + reg = <VADC_REF_1250MV>; + label = "ref_1250mv"; + }; + adc-chan@e { + reg = <VADC_GND_REF>; + }; + adc-chan@f { + reg = <VADC_VDD_VADC>; + }; + }; + pm8226_mpps: mpps@a000 { compatible = "qcom,pm8226-mpp", "qcom,spmi-mpp"; reg = <0xa000>; diff --git a/arch/arm/boot/dts/qcom-pm8941.dtsi b/arch/arm/boot/dts/qcom-pm8941.dtsi index da00b8f5eecd..cdd2bdb77b32 100644 --- a/arch/arm/boot/dts/qcom-pm8941.dtsi +++ b/arch/arm/boot/dts/qcom-pm8941.dtsi @@ -131,7 +131,7 @@ qcom,external-resistor-micro-ohms = <10000>; }; - coincell@2800 { + pm8941_coincell: coincell@2800 { compatible = "qcom,pm8941-coincell"; reg = <0x2800>; status = "disabled"; diff --git a/arch/arm/boot/dts/qcom-pmx65.dtsi b/arch/arm/boot/dts/qcom-pmx65.dtsi new file mode 100644 index 000000000000..5411b833d26e --- /dev/null +++ b/arch/arm/boot/dts/qcom-pmx65.dtsi @@ -0,0 +1,32 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * Copyright (c) 2022, Qualcomm Innovation Center, Inc. All rights reserved. + */ + +#include <dt-bindings/interrupt-controller/irq.h> +#include <dt-bindings/spmi/spmi.h> + +&spmi_bus { + pmic@1 { + compatible = "qcom,pmx65", "qcom,spmi-pmic"; + reg = <1 SPMI_USID>; + #address-cells = <1>; + #size-cells = <0>; + + pmx65_temp: temp-alarm@a00 { + compatible = "qcom,spmi-temp-alarm"; + reg = <0xa00>; + interrupts = <0x1 0xa 0x0 IRQ_TYPE_EDGE_BOTH>; + #thermal-sensor-cells = <0>; + }; + + pmx65_gpios: pinctrl@8800 { + compatible = "qcom,pmx65-gpio"; + reg = <0x8800>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + }; +}; diff --git a/arch/arm/boot/dts/qcom-sdx55.dtsi b/arch/arm/boot/dts/qcom-sdx55.dtsi index d455795da44c..123390721b7f 100644 --- a/arch/arm/boot/dts/qcom-sdx55.dtsi +++ b/arch/arm/boot/dts/qcom-sdx55.dtsi @@ -275,13 +275,6 @@ qcom,bcm-voters = <&apps_bcm_voter>; }; - ipa_virt: interconnect@1e00000 { - compatible = "qcom,sdx55-ipa-virt"; - reg = <0x01e00000 0x100000>; - #interconnect-cells = <1>; - qcom,bcm-voters = <&apps_bcm_voter>; - }; - qpic_bam: dma-controller@1b04000 { compatible = "qcom,bam-v1.7.0"; reg = <0x01b04000 0x1c000>; @@ -770,7 +763,7 @@ }; }; - apps_bcm_voter: bcm_voter { + apps_bcm_voter: bcm-voter { compatible = "qcom,bcm-voter"; }; }; diff --git a/arch/arm/boot/dts/qcom-sdx65-mtp.dts b/arch/arm/boot/dts/qcom-sdx65-mtp.dts index 59457da8e5f1..79dc31aa7cd1 100644 --- a/arch/arm/boot/dts/qcom-sdx65-mtp.dts +++ b/arch/arm/boot/dts/qcom-sdx65-mtp.dts @@ -5,6 +5,10 @@ /dts-v1/; #include "qcom-sdx65.dtsi" +#include <dt-bindings/regulator/qcom,rpmh-regulator.h> +#include <arm64/qcom/pmk8350.dtsi> +#include <arm64/qcom/pm8150b.dtsi> +#include "qcom-pmx65.dtsi" / { model = "Qualcomm Technologies, Inc. SDX65 MTP"; @@ -18,8 +22,225 @@ chosen { stdout-path = "serial0:115200n8"; }; + + reserved-memory { + #address-cells = <1>; + #size-cells = <1>; + ranges; + + mpss_dsm: memory@8c400000 { + no-map; + reg = <0x8c400000 0x3200000>; + }; + + ipa_fw_mem: memory@8fced000 { + no-map; + reg = <0x8fced000 0x10000>; + }; + + mpss_adsp_mem: memory@90800000 { + no-map; + reg = <0x90800000 0x10000000>; + }; + }; + + vph_pwr: vph-pwr-regulator { + compatible = "regulator-fixed"; + regulator-name = "vph_pwr"; + regulator-min-microvolt = <3700000>; + regulator-max-microvolt = <3700000>; + }; + + vreg_bob_3p3: pmx65_bob { + compatible = "regulator-fixed"; + regulator-name = "vreg_bob_3p3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + + regulator-always-on; + regulator-boot-on; + + vin-supply = <&vph_pwr>; + }; }; &blsp1_uart3 { status = "ok"; }; + +&apps_rsc { + pmx65-rpmh-regulators { + compatible = "qcom,pmx65-rpmh-regulators"; + qcom,pmic-id = "b"; + + vdd-s1-supply = <&vph_pwr>; + vdd-s2-supply = <&vph_pwr>; + vdd-s3-supply = <&vph_pwr>; + vdd-s4-supply = <&vph_pwr>; + vdd-s5-supply = <&vph_pwr>; + vdd-s6-supply = <&vph_pwr>; + vdd-s7-supply = <&vph_pwr>; + vdd-s8-supply = <&vph_pwr>; + vdd-l1-supply = <&vreg_s2b_1p224>; + vdd-l2-l18-supply = <&vreg_s2b_1p224>; + vdd-l3-supply = <&vreg_s8b_0p824>; + vdd-l4-supply = <&vreg_s7b_0p936>; + vdd-l5-l6-l16-supply = <&vreg_s4b_1p824>; + vdd-l7-supply = <&vreg_s3b_0p776>; + vdd-l8-l9-supply = <&vreg_s8b_0p824>; + vdd-l10-supply = <&vreg_bob_3p3>; + vdd-l11-l13-supply = <&vreg_bob_3p3>; + vdd-l12-supply = <&vreg_s2b_1p224>; + vdd-l14-supply = <&vreg_s3b_0p776>; + vdd-l15-supply = <&vreg_s2b_1p224>; + vdd-l17-supply = <&vreg_s8b_0p824>; + vdd-l19-supply = <&vreg_s3b_0p776>; + vdd-l20-supply = <&vreg_s7b_0p936>; + vdd-l21-supply = <&vreg_s7b_0p936>; + + vreg_s2b_1p224: smps2 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1400000>; + }; + + vreg_s3b_0p776: smps3 { + regulator-min-microvolt = <500000>; + regulator-max-microvolt = <1040000>; + }; + + vreg_s4b_1p824: smps4 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <2024000>; + }; + + vreg_s7b_0p936: smps7 { + regulator-min-microvolt = <500000>; + regulator-max-microvolt = <1040000>; + }; + + vreg_s8b_0p824: smps8 { + regulator-min-microvolt = <304000>; + regulator-max-microvolt = <1300000>; + }; + + ldo1 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + ldo2 { + regulator-min-microvolt = <1128000>; + regulator-max-microvolt = <1128000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + ldo3 { + regulator-min-microvolt = <300000>; + regulator-max-microvolt = <960000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + ldo4 { + regulator-min-microvolt = <880000>; + regulator-max-microvolt = <912000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + ldo5 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + ldo6 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + ldo7 { + regulator-min-microvolt = <752000>; + regulator-max-microvolt = <752000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + ldo8 { + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <800000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + ldo9 { + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <800000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + ldo10 { + regulator-min-microvolt = <3088000>; + regulator-max-microvolt = <3088000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + ldo11 { + regulator-min-microvolt = <1704000>; + regulator-max-microvolt = <2928000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + ldo12 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + ldo13 { + regulator-min-microvolt = <1704000>; + regulator-max-microvolt = <2928000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + ldo14 { + regulator-min-microvolt = <600000>; + regulator-max-microvolt = <800000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + ldo15 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + ldo16 { + regulator-min-microvolt = <1776000>; + regulator-max-microvolt = <1776000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + ldo17 { + regulator-min-microvolt = <300000>; + regulator-max-microvolt = <960000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + ldo19 { + regulator-min-microvolt = <752000>; + regulator-max-microvolt = <752000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + ldo20 { + regulator-min-microvolt = <912000>; + regulator-max-microvolt = <912000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + ldo21 { + regulator-min-microvolt = <912000>; + regulator-max-microvolt = <912000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + }; +}; diff --git a/arch/arm/boot/dts/qcom-sdx65.dtsi b/arch/arm/boot/dts/qcom-sdx65.dtsi index 796641d30e06..df6f9d6288fe 100644 --- a/arch/arm/boot/dts/qcom-sdx65.dtsi +++ b/arch/arm/boot/dts/qcom-sdx65.dtsi @@ -9,6 +9,7 @@ #include <dt-bindings/clock/qcom,gcc-sdx65.h> #include <dt-bindings/clock/qcom,rpmh.h> #include <dt-bindings/interrupt-controller/arm-gic.h> +#include <dt-bindings/power/qcom-rpmpd.h> #include <dt-bindings/soc/qcom,rpmh-rsc.h> / { @@ -60,11 +61,56 @@ #size-cells = <1>; ranges; + tz_heap_mem: memory@8fcad000 { + no-map; + reg = <0x8fcad000 0x40000>; + }; + + secdata_mem: memory@8fcfd000 { + no-map; + reg = <0x8fcfd000 0x1000>; + }; + + hyp_mem: memory@8fd00000 { + no-map; + reg = <0x8fd00000 0x80000>; + }; + + access_control_mem: memory@8fd80000 { + no-map; + reg = <0x8fd80000 0x80000>; + }; + + aop_mem: memory@8fe00000 { + no-map; + reg = <0x8fe00000 0x20000>; + }; + + smem_mem: memory@8fe20000 { + no-map; + reg = <0x8fe20000 0xc0000>; + }; + cmd_db: reserved-memory@8fee0000 { compatible = "qcom,cmd-db"; reg = <0x8fee0000 0x20000>; no-map; }; + + tz_mem: memory@8ff00000 { + no-map; + reg = <0x8ff00000 0x100000>; + }; + + tz_apps_mem: memory@90000000 { + no-map; + reg = <0x90000000 0x500000>; + }; + + llcc_tcm_mem: memory@15800000 { + no-map; + reg = <0x15800000 0x800000>; + }; }; soc: soc { @@ -91,6 +137,44 @@ status = "disabled"; }; + tcsr_mutex: hwlock@1f40000 { + compatible = "qcom,tcsr-mutex"; + reg = <0x01f40000 0x40000>; + #hwlock-cells = <1>; + }; + + sdhc_1: sdhci@8804000 { + compatible = "qcom,sdx65-sdhci", "qcom,sdhci-msm-v5"; + reg = <0x08804000 0x1000>; + reg-names = "hc_mem"; + interrupts = <GIC_SPI 210 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 227 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "hc_irq", "pwr_irq"; + clocks = <&gcc GCC_SDCC1_APPS_CLK>, + <&gcc GCC_SDCC1_AHB_CLK>; + clock-names = "core", "iface"; + status = "disabled"; + }; + + spmi_bus: qcom,spmi@c440000 { + compatible = "qcom,spmi-pmic-arb"; + reg = <0xc440000 0xd00>, + <0xc600000 0x2000000>, + <0xe600000 0x100000>, + <0xe700000 0xa0000>, + <0xc40a000 0x26000>; + reg-names = "core", "chnls", "obsrvr", "intr", "cnfg"; + interrupts-extended = <&pdc 1 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "periph_irq"; + interrupt-controller; + #interrupt-cells = <4>; + #address-cells = <2>; + #size-cells = <0>; + cell-index = <0>; + qcom,channel = <0>; + qcom,ee = <0>; + }; + tlmm: pinctrl@f100000 { compatible = "qcom,sdx65-tlmm"; reg = <0xf100000 0x300000>; @@ -112,6 +196,46 @@ interrupt-controller; }; + apps_smmu: iommu@15000000 { + compatible = "qcom,sdx65-smmu-500", "arm,mmu-500"; + reg = <0x15000000 0x40000>; + #iommu-cells = <2>; + #global-interrupts = <1>; + interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 298 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 299 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 300 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 301 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 302 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 303 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 304 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 305 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 306 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 307 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 308 IRQ_TYPE_LEVEL_HIGH>; + }; + intc: interrupt-controller@17800000 { compatible = "qcom,msm-qgic2"; interrupt-controller; @@ -121,6 +245,23 @@ <0x17802000 0x1000>; }; + a7pll: clock@17808000 { + compatible = "qcom,sdx55-a7pll"; + reg = <0x17808000 0x1000>; + clocks = <&rpmhcc RPMH_CXO_CLK>; + clock-names = "bi_tcxo"; + #clock-cells = <0>; + }; + + apcs: mailbox@17810000 { + compatible = "qcom,sdx55-apcs-gcc", "syscon"; + reg = <0x17810000 0x2000>; + #mbox-cells = <1>; + clocks = <&rpmhcc RPMH_CXO_CLK>, <&a7pll>, <&gcc GPLL0>; + clock-names = "ref", "pll", "aux"; + #clock-cells = <0>; + }; + timer@17820000 { #address-cells = <1>; #size-cells = <1>; @@ -202,12 +343,62 @@ <WAKE_TCS 2>, <CONTROL_TCS 1>; - rpmhcc: clock-controller@1 { + rpmhcc: clock-controller { compatible = "qcom,sdx65-rpmh-clk"; #clock-cells = <1>; clock-names = "xo"; clocks = <&xo_board>; }; + + rpmhpd: power-controller { + compatible = "qcom,sdx65-rpmhpd"; + #power-domain-cells = <1>; + operating-points-v2 = <&rpmhpd_opp_table>; + + rpmhpd_opp_table: opp-table { + compatible = "operating-points-v2"; + + rpmhpd_opp_ret: opp1 { + opp-level = <RPMH_REGULATOR_LEVEL_RETENTION>; + }; + + rpmhpd_opp_min_svs: opp2 { + opp-level = <RPMH_REGULATOR_LEVEL_MIN_SVS>; + }; + + rpmhpd_opp_low_svs: opp3 { + opp-level = <RPMH_REGULATOR_LEVEL_LOW_SVS>; + }; + + rpmhpd_opp_svs: opp4 { + opp-level = <RPMH_REGULATOR_LEVEL_SVS>; + }; + + rpmhpd_opp_svs_l1: opp5 { + opp-level = <RPMH_REGULATOR_LEVEL_SVS_L1>; + }; + + rpmhpd_opp_nom: opp6 { + opp-level = <RPMH_REGULATOR_LEVEL_NOM>; + }; + + rpmhpd_opp_nom_l1: opp7 { + opp-level = <RPMH_REGULATOR_LEVEL_NOM_L1>; + }; + + rpmhpd_opp_nom_l2: opp8 { + opp-level = <RPMH_REGULATOR_LEVEL_NOM_L2>; + }; + + rpmhpd_opp_turbo: opp9 { + opp-level = <RPMH_REGULATOR_LEVEL_TURBO>; + }; + + rpmhpd_opp_turbo_l1: opp10 { + opp-level = <RPMH_REGULATOR_LEVEL_TURBO_L1>; + }; + }; + }; }; }; diff --git a/arch/arm/boot/dts/r8a7743.dtsi b/arch/arm/boot/dts/r8a7743.dtsi index 3502b5dcc04f..c0c145a5fe8d 100644 --- a/arch/arm/boot/dts/r8a7743.dtsi +++ b/arch/arm/boot/dts/r8a7743.dtsi @@ -140,6 +140,7 @@ compatible = "renesas,r8a7743-wdt", "renesas,rcar-gen2-wdt"; reg = <0 0xe6020000 0 0x0c>; + interrupts = <GIC_SPI 140 IRQ_TYPE_LEVEL_HIGH>; clocks = <&cpg CPG_MOD 402>; power-domains = <&sysc R8A7743_PD_ALWAYS_ON>; resets = <&cpg 402>; diff --git a/arch/arm/boot/dts/r8a7744.dtsi b/arch/arm/boot/dts/r8a7744.dtsi index f5d4b8b85b6d..3f4fb53dd6df 100644 --- a/arch/arm/boot/dts/r8a7744.dtsi +++ b/arch/arm/boot/dts/r8a7744.dtsi @@ -140,6 +140,7 @@ compatible = "renesas,r8a7744-wdt", "renesas,rcar-gen2-wdt"; reg = <0 0xe6020000 0 0x0c>; + interrupts = <GIC_SPI 140 IRQ_TYPE_LEVEL_HIGH>; clocks = <&cpg CPG_MOD 402>; power-domains = <&sysc R8A7744_PD_ALWAYS_ON>; resets = <&cpg 402>; diff --git a/arch/arm/boot/dts/r8a7745.dtsi b/arch/arm/boot/dts/r8a7745.dtsi index f877c51f769c..fe8e98a66d93 100644 --- a/arch/arm/boot/dts/r8a7745.dtsi +++ b/arch/arm/boot/dts/r8a7745.dtsi @@ -270,6 +270,7 @@ rwdt: watchdog@e6020000 { compatible = "renesas,r8a7745-wdt", "renesas,rcar-gen2-wdt"; + interrupts = <GIC_SPI 140 IRQ_TYPE_LEVEL_HIGH>; reg = <0 0xe6020000 0 0x0c>; clocks = <&cpg CPG_MOD 402>; power-domains = <&sysc R8A7745_PD_ALWAYS_ON>; diff --git a/arch/arm/boot/dts/r8a77470.dtsi b/arch/arm/boot/dts/r8a77470.dtsi index 13ef1e9bf4d5..c90f2a270214 100644 --- a/arch/arm/boot/dts/r8a77470.dtsi +++ b/arch/arm/boot/dts/r8a77470.dtsi @@ -91,6 +91,7 @@ compatible = "renesas,r8a77470-wdt", "renesas,rcar-gen2-wdt"; reg = <0 0xe6020000 0 0x0c>; + interrupts = <GIC_SPI 140 IRQ_TYPE_LEVEL_HIGH>; clocks = <&cpg CPG_MOD 402>; power-domains = <&sysc R8A77470_PD_ALWAYS_ON>; resets = <&cpg 402>; diff --git a/arch/arm/boot/dts/r8a7790.dtsi b/arch/arm/boot/dts/r8a7790.dtsi index ed6dd4fcc503..a640488d513b 100644 --- a/arch/arm/boot/dts/r8a7790.dtsi +++ b/arch/arm/boot/dts/r8a7790.dtsi @@ -274,6 +274,7 @@ compatible = "renesas,r8a7790-wdt", "renesas,rcar-gen2-wdt"; reg = <0 0xe6020000 0 0x0c>; + interrupts = <GIC_SPI 140 IRQ_TYPE_LEVEL_HIGH>; clocks = <&cpg CPG_MOD 402>; power-domains = <&sysc R8A7790_PD_ALWAYS_ON>; resets = <&cpg 402>; diff --git a/arch/arm/boot/dts/r8a7791.dtsi b/arch/arm/boot/dts/r8a7791.dtsi index 0ccc162d3c2c..542ed0a71872 100644 --- a/arch/arm/boot/dts/r8a7791.dtsi +++ b/arch/arm/boot/dts/r8a7791.dtsi @@ -161,6 +161,7 @@ compatible = "renesas,r8a7791-wdt", "renesas,rcar-gen2-wdt"; reg = <0 0xe6020000 0 0x0c>; + interrupts = <GIC_SPI 140 IRQ_TYPE_LEVEL_HIGH>; clocks = <&cpg CPG_MOD 402>; power-domains = <&sysc R8A7791_PD_ALWAYS_ON>; resets = <&cpg 402>; diff --git a/arch/arm/boot/dts/r8a7792.dtsi b/arch/arm/boot/dts/r8a7792.dtsi index 9cdb73894ac2..a6d9367f8fa0 100644 --- a/arch/arm/boot/dts/r8a7792.dtsi +++ b/arch/arm/boot/dts/r8a7792.dtsi @@ -111,6 +111,7 @@ compatible = "renesas,r8a7792-wdt", "renesas,rcar-gen2-wdt"; reg = <0 0xe6020000 0 0x0c>; + interrupts = <GIC_SPI 140 IRQ_TYPE_LEVEL_HIGH>; clocks = <&cpg CPG_MOD 402>; power-domains = <&sysc R8A7792_PD_ALWAYS_ON>; resets = <&cpg 402>; diff --git a/arch/arm/boot/dts/r8a7793.dtsi b/arch/arm/boot/dts/r8a7793.dtsi index dea4b1e108af..9ebe7bfaf0ed 100644 --- a/arch/arm/boot/dts/r8a7793.dtsi +++ b/arch/arm/boot/dts/r8a7793.dtsi @@ -146,6 +146,7 @@ compatible = "renesas,r8a7793-wdt", "renesas,rcar-gen2-wdt"; reg = <0 0xe6020000 0 0x0c>; + interrupts = <GIC_SPI 140 IRQ_TYPE_LEVEL_HIGH>; clocks = <&cpg CPG_MOD 402>; power-domains = <&sysc R8A7793_PD_ALWAYS_ON>; resets = <&cpg 402>; diff --git a/arch/arm/boot/dts/r8a7794.dtsi b/arch/arm/boot/dts/r8a7794.dtsi index eac9ed8df0be..b601ee6f7580 100644 --- a/arch/arm/boot/dts/r8a7794.dtsi +++ b/arch/arm/boot/dts/r8a7794.dtsi @@ -128,6 +128,7 @@ compatible = "renesas,r8a7794-wdt", "renesas,rcar-gen2-wdt"; reg = <0 0xe6020000 0 0x0c>; + interrupts = <GIC_SPI 140 IRQ_TYPE_LEVEL_HIGH>; clocks = <&cpg CPG_MOD 402>; power-domains = <&sysc R8A7794_PD_ALWAYS_ON>; resets = <&cpg 402>; diff --git a/arch/arm/boot/dts/r9a06g032.dtsi b/arch/arm/boot/dts/r9a06g032.dtsi index 636a6ab31c58..d3665910958b 100644 --- a/arch/arm/boot/dts/r9a06g032.dtsi +++ b/arch/arm/boot/dts/r9a06g032.dtsi @@ -66,6 +66,19 @@ interrupt-parent = <&gic>; ranges; + rtc0: rtc@40006000 { + compatible = "renesas,r9a06g032-rtc", "renesas,rzn1-rtc"; + reg = <0x40006000 0x1000>; + interrupts = <GIC_SPI 66 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 67 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 68 IRQ_TYPE_EDGE_RISING>; + interrupt-names = "alarm", "timer", "pps"; + clocks = <&sysctrl R9A06G032_HCLK_RTC>; + clock-names = "hclk"; + power-domains = <&sysctrl>; + status = "disabled"; + }; + wdt0: watchdog@40008000 { compatible = "renesas,r9a06g032-wdt", "renesas,rzn1-wdt"; reg = <0x40008000 0x1000>; @@ -87,10 +100,62 @@ reg = <0x4000c000 0x1000>; status = "okay"; #clock-cells = <1>; + #power-domain-cells = <0>; clocks = <&ext_mclk>, <&ext_rtc_clk>, <&ext_jtag_clk>, <&ext_rgmii_ref>; clock-names = "mclk", "rtc", "jtag", "rgmii_ref_ext"; + #address-cells = <1>; + #size-cells = <1>; + + dmamux: dma-router@a0 { + compatible = "renesas,rzn1-dmamux"; + reg = <0xa0 4>; + #dma-cells = <6>; + dma-requests = <32>; + dma-masters = <&dma0 &dma1>; + }; + }; + + pci_usb: pci@40030000 { + compatible = "renesas,pci-r9a06g032", "renesas,pci-rzn1"; + device_type = "pci"; + clocks = <&sysctrl R9A06G032_HCLK_USBH>, + <&sysctrl R9A06G032_HCLK_USBPM>, + <&sysctrl R9A06G032_CLK_PCI_USB>; + clock-names = "hclkh", "hclkpm", "pciclk"; + power-domains = <&sysctrl>; + reg = <0x40030000 0xc00>, + <0x40020000 0x1100>; + interrupts = <GIC_SPI 79 IRQ_TYPE_LEVEL_HIGH>; + status = "disabled"; + + bus-range = <0 0>; + #address-cells = <3>; + #size-cells = <2>; + #interrupt-cells = <1>; + ranges = <0x02000000 0 0x40020000 0x40020000 0 0x00010000>; + /* Should map all possible DDR as inbound ranges, but + * the IP only supports a 256MB, 512MB, or 1GB window. + * flags, PCI addr (64-bit), CPU addr, PCI size (64-bit) + */ + dma-ranges = <0x42000000 0 0x80000000 0x80000000 0 0x40000000>; + interrupt-map-mask = <0xf800 0 0 0x7>; + interrupt-map = <0x0000 0 0 1 &gic GIC_SPI 79 IRQ_TYPE_LEVEL_HIGH + 0x0800 0 0 1 &gic GIC_SPI 79 IRQ_TYPE_LEVEL_HIGH + 0x1000 0 0 2 &gic GIC_SPI 79 IRQ_TYPE_LEVEL_HIGH>; + + usb@1,0 { + reg = <0x800 0 0 0 0>; + phys = <&usbphy>; + phy-names = "usb"; + }; + + usb@2,0 { + reg = <0x1000 0 0 0 0>; + phys = <&usbphy>; + phy-names = "usb"; + }; }; uart0: serial@40060000 { @@ -134,6 +199,8 @@ reg-io-width = <4>; clocks = <&sysctrl R9A06G032_CLK_UART3>, <&sysctrl R9A06G032_HCLK_UART3>; clock-names = "baudclk", "apb_pclk"; + dmas = <&dmamux 0 0 0 0 0 1>, <&dmamux 1 0 0 0 1 1>; + dma-names = "rx", "tx"; status = "disabled"; }; @@ -145,6 +212,8 @@ reg-io-width = <4>; clocks = <&sysctrl R9A06G032_CLK_UART4>, <&sysctrl R9A06G032_HCLK_UART4>; clock-names = "baudclk", "apb_pclk"; + dmas = <&dmamux 2 0 0 0 2 1>, <&dmamux 3 0 0 0 3 1>; + dma-names = "rx", "tx"; status = "disabled"; }; @@ -156,6 +225,8 @@ reg-io-width = <4>; clocks = <&sysctrl R9A06G032_CLK_UART5>, <&sysctrl R9A06G032_HCLK_UART5>; clock-names = "baudclk", "apb_pclk"; + dmas = <&dmamux 4 0 0 0 4 1>, <&dmamux 5 0 0 0 5 1>; + dma-names = "rx", "tx"; status = "disabled"; }; @@ -167,6 +238,8 @@ reg-io-width = <4>; clocks = <&sysctrl R9A06G032_CLK_UART6>, <&sysctrl R9A06G032_HCLK_UART6>; clock-names = "baudclk", "apb_pclk"; + dmas = <&dmamux 6 0 0 0 6 1>, <&dmamux 7 0 0 0 7 1>; + dma-names = "rx", "tx"; status = "disabled"; }; @@ -178,6 +251,8 @@ reg-io-width = <4>; clocks = <&sysctrl R9A06G032_CLK_UART7>, <&sysctrl R9A06G032_HCLK_UART7>; clock-names = "baudclk", "apb_pclk"; + dmas = <&dmamux 4 0 0 0 20 1>, <&dmamux 5 0 0 0 21 1>; + dma-names = "rx", "tx"; status = "disabled"; }; @@ -195,11 +270,40 @@ interrupts = <GIC_SPI 58 IRQ_TYPE_LEVEL_HIGH>; clocks = <&sysctrl R9A06G032_HCLK_NAND>, <&sysctrl R9A06G032_CLK_NAND>; clock-names = "hclk", "eclk"; + power-domains = <&sysctrl>; #address-cells = <1>; #size-cells = <0>; status = "disabled"; }; + dma0: dma-controller@40104000 { + compatible = "renesas,r9a06g032-dma", "renesas,rzn1-dma"; + reg = <0x40104000 0x1000>; + interrupts = <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>; + clock-names = "hclk"; + clocks = <&sysctrl R9A06G032_HCLK_DMA0>; + dma-channels = <8>; + dma-requests = <16>; + dma-masters = <1>; + #dma-cells = <3>; + block_size = <0xfff>; + data-width = <8>; + }; + + dma1: dma-controller@40105000 { + compatible = "renesas,r9a06g032-dma", "renesas,rzn1-dma"; + reg = <0x40105000 0x1000>; + interrupts = <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>; + clock-names = "hclk"; + clocks = <&sysctrl R9A06G032_HCLK_DMA1>; + dma-channels = <8>; + dma-requests = <16>; + dma-masters = <1>; + #dma-cells = <3>; + block_size = <0xfff>; + data-width = <8>; + }; + gic: interrupt-controller@44101000 { compatible = "arm,gic-400", "arm,cortex-a7-gic"; interrupt-controller; @@ -214,8 +318,7 @@ }; timer { - compatible = "arm,cortex-a7-timer", - "arm,armv7-timer"; + compatible = "arm,armv7-timer"; interrupt-parent = <&gic>; arm,cpu-registers-not-fw-configured; always-on; @@ -225,4 +328,10 @@ <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>, <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>; }; + + usbphy: usb-phy { + #phy-cells = <0>; + compatible = "usb-nop-xceiv"; + status = "disabled"; + }; }; diff --git a/arch/arm/boot/dts/rk3036.dtsi b/arch/arm/boot/dts/rk3036.dtsi index ba2b8891bbb7..242ce42fbd87 100644 --- a/arch/arm/boot/dts/rk3036.dtsi +++ b/arch/arm/boot/dts/rk3036.dtsi @@ -556,7 +556,7 @@ status = "disabled"; }; - pdma: pdma@20078000 { + pdma: dma-controller@20078000 { compatible = "arm,pl330", "arm,primecell"; reg = <0x20078000 0x4000>; interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>, @@ -614,7 +614,7 @@ #interrupt-cells = <2>; }; - pcfg_pull_default: pcfg_pull_default { + pcfg_pull_default: pcfg-pull-default { bias-pull-pin-default; }; diff --git a/arch/arm/boot/dts/rk3188-bqedison2qc.dts b/arch/arm/boot/dts/rk3188-bqedison2qc.dts index 85d3fce0142f..35b7a5798eee 100644 --- a/arch/arm/boot/dts/rk3188-bqedison2qc.dts +++ b/arch/arm/boot/dts/rk3188-bqedison2qc.dts @@ -7,6 +7,7 @@ /dts-v1/; #include <dt-bindings/i2c/i2c.h> #include <dt-bindings/input/input.h> +#include <dt-bindings/interrupt-controller/irq.h> #include "rk3188.dtsi" / { @@ -485,7 +486,7 @@ reg = <1>; compatible = "brcm,bcm4329-fmac"; interrupt-parent = <&gpio3>; - interrupts = <RK_PD2 GPIO_ACTIVE_HIGH>; + interrupts = <RK_PD2 IRQ_TYPE_NONE>; interrupt-names = "host-wake"; brcm,drive-strength = <5>; pinctrl-names = "default"; diff --git a/arch/arm/boot/dts/rk322x.dtsi b/arch/arm/boot/dts/rk322x.dtsi index 5868eb512f69..6513ffcaac92 100644 --- a/arch/arm/boot/dts/rk322x.dtsi +++ b/arch/arm/boot/dts/rk322x.dtsi @@ -501,7 +501,7 @@ <75000000>; }; - pdma: pdma@110f0000 { + pdma: dma-controller@110f0000 { compatible = "arm,pl330", "arm,primecell"; reg = <0x110f0000 0x4000>; interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>, diff --git a/arch/arm/boot/dts/s5pv210-aquila.dts b/arch/arm/boot/dts/s5pv210-aquila.dts index 54de3bc77c30..bc0b7354b6c0 100644 --- a/arch/arm/boot/dts/s5pv210-aquila.dts +++ b/arch/arm/boot/dts/s5pv210-aquila.dts @@ -29,8 +29,7 @@ memory@30000000 { device_type = "memory"; - reg = <0x30000000 0x05000000 - 0x40000000 0x18000000>; + reg = <0x30000000 0x05000000>, <0x40000000 0x18000000>; }; pmic_ap_clk: clock-0 { diff --git a/arch/arm/boot/dts/s5pv210-aries.dtsi b/arch/arm/boot/dts/s5pv210-aries.dtsi index c8f1c324a6c2..daa1067055c8 100644 --- a/arch/arm/boot/dts/s5pv210-aries.dtsi +++ b/arch/arm/boot/dts/s5pv210-aries.dtsi @@ -24,9 +24,9 @@ memory@30000000 { device_type = "memory"; - reg = <0x30000000 0x05000000 - 0x40000000 0x10000000 - 0x50000000 0x08000000>; + reg = <0x30000000 0x05000000>, + <0x40000000 0x10000000>, + <0x50000000 0x08000000>; }; reserved-memory { @@ -564,7 +564,6 @@ reset-gpios = <&mp05 5 GPIO_ACTIVE_LOW>; vdd3-supply = <&ldo7_reg>; vci-supply = <&ldo17_reg>; - spi-cs-high; spi-max-frequency = <1200000>; pinctrl-names = "default"; @@ -636,7 +635,7 @@ }; &i2s0 { - dmas = <&pdma0 9>, <&pdma0 10>, <&pdma0 11>; + dmas = <&pdma0 10>, <&pdma0 9>, <&pdma0 11>; status = "okay"; }; @@ -895,7 +894,7 @@ device-wakeup-gpios = <&gpg3 4 GPIO_ACTIVE_HIGH>; interrupt-parent = <&gph2>; interrupts = <5 IRQ_TYPE_LEVEL_HIGH>; - interrupt-names = "host-wake"; + interrupt-names = "host-wakeup"; }; }; diff --git a/arch/arm/boot/dts/s5pv210-goni.dts b/arch/arm/boot/dts/s5pv210-goni.dts index c6f39147cb96..d32f42dd1bf5 100644 --- a/arch/arm/boot/dts/s5pv210-goni.dts +++ b/arch/arm/boot/dts/s5pv210-goni.dts @@ -30,9 +30,9 @@ memory@30000000 { device_type = "memory"; - reg = <0x30000000 0x05000000 - 0x40000000 0x10000000 - 0x50000000 0x08000000>; + reg = <0x30000000 0x05000000>, + <0x40000000 0x10000000>, + <0x50000000 0x08000000>; }; pmic_ap_clk: clock-0 { diff --git a/arch/arm/boot/dts/s5pv210.dtsi b/arch/arm/boot/dts/s5pv210.dtsi index 353ba7b09a0c..f1b85aae8842 100644 --- a/arch/arm/boot/dts/s5pv210.dtsi +++ b/arch/arm/boot/dts/s5pv210.dtsi @@ -117,7 +117,7 @@ }; }; - pdma0: dma@e0900000 { + pdma0: dma-controller@e0900000 { compatible = "arm,pl330", "arm,primecell"; reg = <0xe0900000 0x1000>; interrupt-parent = <&vic0>; @@ -125,11 +125,9 @@ clocks = <&clocks CLK_PDMA0>; clock-names = "apb_pclk"; #dma-cells = <1>; - #dma-channels = <8>; - #dma-requests = <32>; }; - pdma1: dma@e0a00000 { + pdma1: dma-controller@e0a00000 { compatible = "arm,pl330", "arm,primecell"; reg = <0xe0a00000 0x1000>; interrupt-parent = <&vic0>; @@ -137,8 +135,6 @@ clocks = <&clocks CLK_PDMA1>; clock-names = "apb_pclk"; #dma-cells = <1>; - #dma-channels = <8>; - #dma-requests = <32>; }; adc: adc@e1700000 { @@ -239,8 +235,8 @@ reg = <0xeee30000 0x1000>; interrupt-parent = <&vic2>; interrupts = <16>; - dma-names = "rx", "tx", "tx-sec"; - dmas = <&pdma1 9>, <&pdma1 10>, <&pdma1 11>; + dma-names = "tx", "rx", "tx-sec"; + dmas = <&pdma1 10>, <&pdma1 9>, <&pdma1 11>; clock-names = "iis", "i2s_opclk0", "i2s_opclk1"; @@ -259,8 +255,8 @@ reg = <0xe2100000 0x1000>; interrupt-parent = <&vic2>; interrupts = <17>; - dma-names = "rx", "tx"; - dmas = <&pdma1 12>, <&pdma1 13>; + dma-names = "tx", "rx"; + dmas = <&pdma1 13>, <&pdma1 12>; clock-names = "iis", "i2s_opclk0"; clocks = <&clocks CLK_I2S1>, <&clocks SCLK_AUDIO1>; pinctrl-names = "default"; @@ -274,8 +270,8 @@ reg = <0xe2a00000 0x1000>; interrupt-parent = <&vic2>; interrupts = <18>; - dma-names = "rx", "tx"; - dmas = <&pdma1 14>, <&pdma1 15>; + dma-names = "tx", "rx"; + dmas = <&pdma1 15>, <&pdma1 14>; clock-names = "iis", "i2s_opclk0"; clocks = <&clocks CLK_I2S2>, <&clocks SCLK_AUDIO2>; pinctrl-names = "default"; @@ -427,38 +423,28 @@ status = "disabled"; }; - ehci: ehci@ec200000 { + ehci: usb@ec200000 { compatible = "samsung,exynos4210-ehci"; reg = <0xec200000 0x100>; interrupts = <23>; interrupt-parent = <&vic1>; clocks = <&clocks CLK_USB_HOST>; clock-names = "usbhost"; - #address-cells = <1>; - #size-cells = <0>; + phys = <&usbphy 1>; + phy-names = "host"; status = "disabled"; - - port@0 { - reg = <0>; - phys = <&usbphy 1>; - }; }; - ohci: ohci@ec300000 { + ohci: usb@ec300000 { compatible = "samsung,exynos4210-ohci"; reg = <0xec300000 0x100>; interrupts = <23>; interrupt-parent = <&vic1>; clocks = <&clocks CLK_USB_HOST>; clock-names = "usbhost"; - #address-cells = <1>; - #size-cells = <0>; + phys = <&usbphy 1>; + phy-names = "host"; status = "disabled"; - - port@0 { - reg = <0>; - phys = <&usbphy 1>; - }; }; mfc: codec@f1700000 { @@ -528,7 +514,7 @@ clock-names = "sclk_fimg2d", "fimg2d"; }; - mdma1: mdma@fa200000 { + mdma1: dma-controller@fa200000 { compatible = "arm,pl330", "arm,primecell"; reg = <0xfa200000 0x1000>; interrupt-parent = <&vic0>; @@ -536,8 +522,6 @@ clocks = <&clocks CLK_MDMA>; clock-names = "apb_pclk"; #dma-cells = <1>; - #dma-channels = <8>; - #dma-requests = <1>; }; rotator: rotator@fa300000 { diff --git a/arch/arm/boot/dts/sama7g5.dtsi b/arch/arm/boot/dts/sama7g5.dtsi index f691c8f08d04..b63263129692 100644 --- a/arch/arm/boot/dts/sama7g5.dtsi +++ b/arch/arm/boot/dts/sama7g5.dtsi @@ -857,7 +857,6 @@ #interrupt-cells = <3>; #address-cells = <0>; interrupt-controller; - interrupt-parent; reg = <0xe8c11000 0x1000>, <0xe8c12000 0x2000>; }; diff --git a/arch/arm/boot/dts/socfpga.dtsi b/arch/arm/boot/dts/socfpga.dtsi index 7c1d6423d7f8..bfaef45bdd04 100644 --- a/arch/arm/boot/dts/socfpga.dtsi +++ b/arch/arm/boot/dts/socfpga.dtsi @@ -46,7 +46,7 @@ <0xff113000 0x1000>; }; - intc: intc@fffed000 { + intc: interrupt-controller@fffed000 { compatible = "arm,cortex-a9-gic"; #interrupt-cells = <3>; interrupt-controller; @@ -80,8 +80,6 @@ <0 110 4>, <0 111 4>; #dma-cells = <1>; - #dma-channels = <8>; - #dma-requests = <32>; clocks = <&l4_main_clk>; clock-names = "apb_pclk"; resets = <&rst DMA_RESET>; diff --git a/arch/arm/boot/dts/socfpga_arria10.dtsi b/arch/arm/boot/dts/socfpga_arria10.dtsi index 3ba431dfa8c9..26bda2557fe8 100644 --- a/arch/arm/boot/dts/socfpga_arria10.dtsi +++ b/arch/arm/boot/dts/socfpga_arria10.dtsi @@ -38,7 +38,7 @@ <0xff113000 0x1000>; }; - intc: intc@ffffd000 { + intc: interrupt-controller@ffffd000 { compatible = "arm,cortex-a9-gic"; #interrupt-cells = <3>; interrupt-controller; @@ -73,8 +73,6 @@ <0 90 IRQ_TYPE_LEVEL_HIGH>, <0 91 IRQ_TYPE_LEVEL_HIGH>; #dma-cells = <1>; - #dma-channels = <8>; - #dma-requests = <32>; clocks = <&l4_main_clk>; clock-names = "apb_pclk"; resets = <&rst DMA_RESET>, <&rst DMA_OCP_RESET>; diff --git a/arch/arm/boot/dts/ste-dbx5x0.dtsi b/arch/arm/boot/dts/ste-dbx5x0.dtsi index dc0bcc7020f1..c28b32640254 100644 --- a/arch/arm/boot/dts/ste-dbx5x0.dtsi +++ b/arch/arm/boot/dts/ste-dbx5x0.dtsi @@ -755,7 +755,7 @@ #address-cells = <1>; #size-cells = <0>; clocks = <&prcc_kclk 3 1>, <&prcc_pclk 3 1>; - clock-names = "SSPCLK", "apb_pclk"; + clock-names = "sspclk", "apb_pclk"; dmas = <&dma 8 0 0x2>, /* Logical - DevToMem */ <&dma 8 0 0x0>; /* Logical - MemToDev */ dma-names = "rx", "tx"; @@ -772,7 +772,7 @@ #address-cells = <1>; #size-cells = <0>; clocks = <&prcc_kclk 3 2>, <&prcc_pclk 3 2>; - clock-names = "SSPCLK", "apb_pclk"; + clock-names = "sspclk", "apb_pclk"; dmas = <&dma 9 0 0x2>, /* Logical - DevToMem */ <&dma 9 0 0x0>; /* Logical - MemToDev */ dma-names = "rx", "tx"; @@ -790,7 +790,7 @@ #size-cells = <0>; /* Same clock wired to kernel and pclk */ clocks = <&prcc_pclk 2 8>, <&prcc_pclk 2 8>; - clock-names = "SSPCLK", "apb_pclk"; + clock-names = "sspclk", "apb_pclk"; dmas = <&dma 0 0 0x2>, /* Logical - DevToMem */ <&dma 0 0 0x0>; /* Logical - MemToDev */ dma-names = "rx", "tx"; @@ -807,7 +807,7 @@ #size-cells = <0>; /* Same clock wired to kernel and pclk */ clocks = <&prcc_pclk 2 2>, <&prcc_pclk 2 2>; - clock-names = "SSPCLK", "apb_pclk"; + clock-names = "sspclk", "apb_pclk"; dmas = <&dma 35 0 0x2>, /* Logical - DevToMem */ <&dma 35 0 0x0>; /* Logical - MemToDev */ dma-names = "rx", "tx"; @@ -824,7 +824,7 @@ #size-cells = <0>; /* Same clock wired to kernel and pclk */ clocks = <&prcc_pclk 2 1>, <&prcc_pclk 2 1>; - clock-names = "SSPCLK", "apb_pclk"; + clock-names = "sspclk", "apb_pclk"; dmas = <&dma 33 0 0x2>, /* Logical - DevToMem */ <&dma 33 0 0x0>; /* Logical - MemToDev */ dma-names = "rx", "tx"; @@ -841,7 +841,7 @@ #size-cells = <0>; /* Same clock wired to kernel and pclk */ clocks = <&prcc_pclk 1 7>, <&prcc_pclk 1 7>; - clock-names = "SSPCLK", "apb_pclk"; + clock-names = "sspclk", "apb_pclk"; dmas = <&dma 40 0 0x2>, /* Logical - DevToMem */ <&dma 40 0 0x0>; /* Logical - MemToDev */ dma-names = "rx", "tx"; diff --git a/arch/arm/boot/dts/ste-ux500-samsung-codina-tmo.dts b/arch/arm/boot/dts/ste-ux500-samsung-codina-tmo.dts new file mode 100644 index 000000000000..d6940e0afa86 --- /dev/null +++ b/arch/arm/boot/dts/ste-ux500-samsung-codina-tmo.dts @@ -0,0 +1,785 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * Devicetree for the Samsung Galaxy Exhibit SGH-T599 also known as Codina-TMO, + * the "TMO" shall be read "T-Mobile" as this phone was produced exlusively + * for T-Mobile in the United States. + * + * This phone is closely related to the Codina, but has: + * - No CPU speed cap, full ~1GHz rate + * - Different power management IC, AB8505 + * - As AB8505 has a micro USB phy, no TI TSU6111 + * - Different power routing such as the removal of the external LDO for the + * touchscreen in favor of using the AB8505 + * - Using a regulator for the key backlight LED + * - Using the Samsung S6D27A1 panel by default + * - The panel is using one of the ordinary AB8505 regulators for 1.8V + * - WiFi/Bluetooth combi chip upgraded to BCM4334 + * - GPIO for backlight control moved from 68 to 69 + */ + +/dts-v1/; +#include "ste-db8500.dtsi" +#include "ste-ab8505.dtsi" +#include "ste-dbx5x0-pinctrl.dtsi" +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/leds/common.h> +#include <dt-bindings/input/input.h> +#include <dt-bindings/interrupt-controller/irq.h> + +/ { + model = "Samsung Galaxy Exhibit (SGH-T599)"; + compatible = "samsung,codina-tmo", "st-ericsson,u8500"; + + chosen { + stdout-path = &serial2; + }; + + battery: battery { + compatible = "samsung,eb425161lu"; + }; + + thermal-zones { + battery-thermal { + /* This zone will be polled by the battery temperature code */ + polling-delay = <0>; + polling-delay-passive = <0>; + thermal-sensors = <&bat_therm>; + }; + }; + + bat_therm: thermistor { + compatible = "samsung,1404-001221"; + io-channels = <&gpadc 0x02>; /* BatTemp */ + pullup-uv = <1800000>; + pullup-ohm = <230000>; + pulldown-ohm = <0>; + #thermal-sensor-cells = <0>; + }; + + /* TI TXS0206 level translator for 2.9 V */ + sd_level_translator: regulator-gpio { + compatible = "regulator-fixed"; + + /* GPIO87 EN */ + gpios = <&gpio2 23 GPIO_ACTIVE_HIGH>; + enable-active-high; + + regulator-name = "sd-level-translator"; + regulator-min-microvolt = <2900000>; + regulator-max-microvolt = <2900000>; + regulator-type = "voltage"; + + startup-delay-us = <200>; + + pinctrl-names = "default"; + pinctrl-0 = <&sd_level_translator_default>; + }; + + /* External LDO MIC5366-3.3YMT for eMMC */ + ldo_3v3_reg: regulator-gpio-ldo-3v3 { + compatible = "regulator-fixed"; + /* Supplied in turn by VBAT */ + regulator-name = "VMEM_3V3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + gpios = <&gpio6 31 GPIO_ACTIVE_HIGH>; + startup-delay-us = <5000>; + enable-active-high; + pinctrl-names = "default"; + pinctrl-0 = <&emmc_ldo_en_default_mode>; + }; + + /* + * External Ricoh RP152L010B-TR LCD LDO regulator for the display. + * LCD_PWR_EN controls both the 3.0V output. + */ + lcd_3v0_reg: regulator-gpio-lcd-3v0 { + compatible = "regulator-fixed"; + /* Supplied in turn by VBAT */ + regulator-name = "VREG_LCD_3.0V"; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + /* GPIO219 controls this regulator */ + gpio = <&gpio6 27 GPIO_ACTIVE_HIGH>; + enable-active-high; + pinctrl-names = "default"; + pinctrl-0 = <&lcd_pwr_en_default_mode>; + }; + + /* + * This regulator is a GPIO line that drives the Broadcom WLAN + * line WL_REG_ON high and enables the internal regulators + * inside the chip. Unfortunatley it is erroneously named + * WLAN_RST_N on the schematic but it is not a reset line. + * + * The voltage specified here is only used to determine the OCR mask, + * the for the SDIO connector, the chip is actually connected + * directly to VBAT. + */ + wl_reg: regulator-gpio-wlan { + compatible = "regulator-fixed"; + regulator-name = "WL_REG_ON"; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + startup-delay-us = <100000>; + /* GPIO215 (WLAN_RST_N to WL_REG_ON) */ + gpio = <&gpio6 23 GPIO_ACTIVE_HIGH>; + enable-active-high; + pinctrl-names = "default"; + pinctrl-0 = <&wlan_ldo_en_default>; + }; + + vibrator { + compatible = "gpio-vibrator"; + /* GPIO195 "MOT_EN" */ + enable-gpios = <&gpio6 3 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&vibrator_default>; + }; + + gpio-keys { + compatible = "gpio-keys"; + pinctrl-names = "default"; + pinctrl-0 = <&gpio_keys_default_mode>; + + button-home { + linux,code = <KEY_HOME>; + label = "HOME"; + /* GPIO91 */ + gpios = <&gpio2 27 GPIO_ACTIVE_LOW>; + }; + button-volup { + linux,code = <KEY_VOLUMEUP>; + label = "VOL+"; + /* GPIO67 */ + gpios = <&gpio2 3 GPIO_ACTIVE_LOW>; + }; + button-voldown { + linux,code = <KEY_VOLUMEDOWN>; + label = "VOL-"; + /* GPIO92 */ + gpios = <&gpio2 28 GPIO_ACTIVE_LOW>; + }; + }; + + led-touchkeys { + compatible = "regulator-led"; + vled-supply = <&ab8500_ldo_aux4_reg>; // 3.3V + default-state = "on"; + function = LED_FUNCTION_KBD_BACKLIGHT; + color = <LED_COLOR_ID_WHITE>; + }; + + ktd253: backlight { + compatible = "kinetic,ktd253"; + /* GPIO69 is used on Codina R0.4 and Codina TMO */ + enable-gpios = <&gpio2 5 GPIO_ACTIVE_HIGH>; + /* Default to 13/32 brightness */ + default-brightness = <13>; + pinctrl-names = "default"; + pinctrl-0 = <&ktd253_backlight_default_mode>; + }; + + /* Richtek RT8515GQW Flash LED Driver IC */ + flash { + compatible = "richtek,rt8515"; + /* GPIO 140 */ + enf-gpios = <&gpio4 12 GPIO_ACTIVE_HIGH>; + /* GPIO 141 */ + ent-gpios = <&gpio4 13 GPIO_ACTIVE_HIGH>; + /* + * RFS is 16 kOhm and RTS is 100 kOhm giving + * the flash max current 343mA and torch max + * current 55 mA. + */ + richtek,rfs-ohms = <16000>; + richtek,rts-ohms = <100000>; + pinctrl-names = "default"; + pinctrl-0 = <&gpio_flash_default_mode>; + + led { + function = LED_FUNCTION_FLASH; + color = <LED_COLOR_ID_WHITE>; + flash-max-timeout-us = <250000>; + flash-max-microamp = <343750>; + led-max-microamp = <55000>; + }; + }; + + /* Bit-banged I2C on GPIO143 and GPIO144 also called "SUBPMU I2C" */ + i2c-gpio-0 { + compatible = "i2c-gpio"; + sda-gpios = <&gpio4 16 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>; + scl-gpios = <&gpio4 15 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>; + pinctrl-names = "default"; + pinctrl-0 = <&i2c_gpio_0_default>; + #address-cells = <1>; + #size-cells = <0>; + + /* TODO: this should also be used by the SM5103 Camera power management unit */ + }; + + /* Bit-banged I2C on GPIO151 and GPIO152 also called "COMP I2C" */ + i2c-gpio-1 { + compatible = "i2c-gpio"; + sda-gpios = <&gpio4 24 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>; + scl-gpios = <&gpio4 23 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>; + pinctrl-names = "default"; + pinctrl-0 = <&i2c_gpio_1_default>; + #address-cells = <1>; + #size-cells = <0>; + + magnetometer@c { + compatible = "alps,hscdtd008a"; + reg = <0x0c>; + clock-frequency = <400000>; + + avdd-supply = <&ab8500_ldo_aux1_reg>; // 3V + dvdd-supply = <&ab8500_ldo_aux8_reg>; // 1.8V + }; + }; + + spi-gpio-0 { + compatible = "spi-gpio"; + /* Clock on GPIO220, pin SCL */ + sck-gpios = <&gpio6 28 GPIO_ACTIVE_HIGH>; + /* MOSI on GPIO224, pin SDI "slave data in" */ + mosi-gpios = <&gpio7 0 GPIO_ACTIVE_HIGH>; + /* MISO on GPIO225, pin SDO "slave data out" */ + miso-gpios = <&gpio7 1 GPIO_ACTIVE_HIGH>; + /* Chip select on GPIO201 */ + cs-gpios = <&gpio6 9 GPIO_ACTIVE_LOW>; + num-chipselects = <1>; + + pinctrl-names = "default"; + pinctrl-0 = <&spi_gpio_0_default>; + #address-cells = <1>; + #size-cells = <0>; + + panel@0 { + compatible = "samsung,s6d27a1"; + spi-max-frequency = <1200000>; + /* TYPE 3: inverse clock polarity and phase */ + spi-cpha; + spi-cpol; + + reg = <0>; + vci-supply = <&lcd_3v0_reg>; + vccio-supply = <&ab8500_ldo_aux6_reg>; + + /* Reset on GPIO139 */ + reset-gpios = <&gpio4 11 GPIO_ACTIVE_LOW>; + /* LCD_VGH/LCD_DETECT, ESD IRQ on GPIO93 */ + interrupt-parent = <&gpio2>; + interrupts = <29 IRQ_TYPE_EDGE_RISING>; + + pinctrl-names = "default"; + pinctrl-0 = <&panel_default_mode>; + backlight = <&ktd253>; + + port { + panel_in: endpoint { + remote-endpoint = <&display_out>; + }; + }; + }; + }; + + soc { + /* External Micro SD slot */ + mmc@80126000 { + arm,primecell-periphid = <0x10480180>; + max-frequency = <100000000>; + bus-width = <4>; + cap-sd-highspeed; + cap-mmc-highspeed; + st,sig-pin-fbclk; + full-pwr-cycle; + /* MMC is powered by AUX3 1.2V .. 2.91V */ + vmmc-supply = <&ab8500_ldo_aux3_reg>; + /* 2.9 V level translator is using AUX3 at 2.9 V as well */ + vqmmc-supply = <&sd_level_translator>; + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&mc0_a_2_default>; + pinctrl-1 = <&mc0_a_2_sleep>; + cd-gpios = <&gpio6 25 GPIO_ACTIVE_LOW>; // GPIO217 + status = "okay"; + }; + + /* WLAN SDIO channel */ + mmc@80118000 { + arm,primecell-periphid = <0x10480180>; + max-frequency = <50000000>; + bus-width = <4>; + non-removable; + cap-sd-highspeed; + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&mc1_a_2_default>; + pinctrl-1 = <&mc1_a_2_sleep>; + /* + * GPIO-controlled voltage enablement: this drives + * the WL_REG_ON line high when we use this device. + * Represented as regulator to fill OCR mask. + */ + vmmc-supply = <&wl_reg>; + + #address-cells = <1>; + #size-cells = <0>; + status = "okay"; + + wifi@1 { + compatible = "brcm,bcm4334-fmac", "brcm,bcm4329-fmac"; + reg = <1>; + /* GPIO216 WL_HOST_WAKE */ + interrupt-parent = <&gpio6>; + interrupts = <24 IRQ_TYPE_EDGE_FALLING>; + interrupt-names = "host-wake"; + pinctrl-names = "default"; + pinctrl-0 = <&wlan_default_mode>; + }; + }; + + /* eMMC */ + mmc@80005000 { + arm,primecell-periphid = <0x10480180>; + max-frequency = <100000000>; + bus-width = <8>; + non-removable; + cap-mmc-highspeed; + mmc-ddr-1_8v; + no-sdio; + no-sd; + vmmc-supply = <&ldo_3v3_reg>; + pinctrl-names = "default", "sleep"; + /* + * GPIO130 will be set to input no pull-up resulting in a resistor + * pulling the reset high and taking the memory out of reset. + */ + pinctrl-0 = <&mc2_a_1_default>; + pinctrl-1 = <&mc2_a_1_sleep>; + status = "okay"; + }; + + /* GBF (Bluetooth) UART */ + uart@80120000 { + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&u0_a_1_default>; + pinctrl-1 = <&u0_a_1_sleep>; + status = "okay"; + + bluetooth { + /* BCM4334B0 actually */ + compatible = "brcm,bcm4330-bt"; + /* GPIO222 rail BT_VREG_EN to BT_REG_ON */ + shutdown-gpios = <&gpio6 30 GPIO_ACTIVE_HIGH>; + /* BT_WAKE on GPIO199 */ + device-wakeup-gpios = <&gpio6 7 GPIO_ACTIVE_HIGH>; + /* BT_HOST_WAKE on GPIO97 */ + /* FIXME: convert to interrupt */ + host-wakeup-gpios = <&gpio3 1 GPIO_ACTIVE_HIGH>; + /* BT_RST_N on GPIO209 */ + reset-gpios = <&gpio6 17 GPIO_ACTIVE_LOW>; + pinctrl-names = "default"; + pinctrl-0 = <&bluetooth_default_mode>; + }; + }; + + /* GPS UART */ + uart@80121000 { + status = "okay"; + pinctrl-names = "default", "sleep"; + /* CTS/RTS is not used, CTS is repurposed as GPIO */ + pinctrl-0 = <&u1rxtx_a_1_default>; + pinctrl-1 = <&u1rxtx_a_1_sleep>; + /* FIXME: add a device for the GPS here */ + }; + + /* Debugging console UART connected to AB8505 */ + uart@80007000 { + status = "okay"; + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&u2rxtx_c_1_default>; + pinctrl-1 = <&u2rxtx_c_1_sleep>; + }; + + prcmu@80157000 { + ab8505 { + phy { + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&usb_a_1_default>; + pinctrl-1 = <&usb_a_1_sleep>; + }; + + ab8500_fg { + line-impedance-micro-ohms = <36000>; + }; + + /* This is mostly identical to the Codina v0.4 regulators */ + regulator { + ab8500_ldo_aux1 { + regulator-name = "v-sensors-vdd"; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3300000>; + }; + + ab8500_ldo_aux2 { + regulator-name = "v-aux2"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; + + ab8500_ldo_aux3 { + regulator-name = "v-mmc-sd"; + }; + + ab8500_ldo_aux4 { + regulator-name = "v-aux4"; + /* + * Providing some span here makes the touchkey + * LEDs actually dimmable. + */ + regulator-min-microvolt = <1100000>; + regulator-max-microvolt = <3300000>; + }; + + ab8500_ldo_aux5 { + regulator-name = "v-aux5"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + ab8500_ldo_aux6 { + /* 1.8 V to the display */ + regulator-name = "v-aux6"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + ab8500_ldo_aux8 { + regulator-name = "v-sensors-vio"; + }; + }; + }; + }; + + /* I2C0 also known as "AGC I2C" */ + i2c@80004000 { + status = "okay"; + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&i2c0_a_1_default>; + pinctrl-1 = <&i2c0_a_1_sleep>; + + proximity@39 { + /* Codina has the Amstaos TMD2672 */ + compatible = "amstaos,tmd2672"; + clock-frequency = <400000>; + reg = <0x39>; + + /* IRQ on GPIO146 "PS_INT" */ + interrupt-parent = <&gpio4>; + interrupts = <18 IRQ_TYPE_EDGE_FALLING>; + vdd-supply = <&ab8500_ldo_aux1_reg>; + vddio-supply = <&ab8500_ldo_aux8_reg>; + pinctrl-names = "default"; + pinctrl-0 = <&tmd2672_codina_default>; + }; + }; + + /* I2C2 on GPIO10 and GPIO11 also called "SENSORS I2C" */ + i2c@80128000 { + status = "okay"; + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&i2c2_b_2_default>; + pinctrl-1 = <&i2c2_b_2_sleep>; + + /* Bosch BMA254 accelerometer */ + accelerometer@18 { + compatible = "bosch,bma254"; + reg = <0x18>; + mount-matrix = "0", "1", "0", + "-1", "0", "0", + "0", "0", "1"; + vddio-supply = <&ab8500_ldo_aux8_reg>; // 1.8V + vdd-supply = <&ab8500_ldo_aux1_reg>; // 3V + }; + }; + + /* I2C3 */ + i2c@80110000 { + status = "okay"; + + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&i2c3_c_2_default>; + pinctrl-1 = <&i2c3_c_2_sleep>; + + /* TODO: write bindings and driver for this touchscreen */ + + /* Zinitix BT404 ISP part */ + isp@50 { + compatible = "zinitix,bt404-isp"; + reg = <0x50>; + pinctrl-names = "default"; + pinctrl-0 = <&tsp_default>; + }; + + /* Zinitix BT404 touchscreen, also has the touchkeys for menu and back */ + touchscreen@20 { + compatible = "zinitix,bt404"; + reg = <0x20>; + /* GPIO218 (TSP_INT_1V8) */ + interrupt-parent = <&gpio6>; + interrupts = <26 IRQ_TYPE_EDGE_FALLING>; + vcca-supply = <&ab8500_ldo_aux2_reg>; // 3.3V + vdd-supply = <&ab8500_ldo_aux5_reg>; // 1.8V + zinitix,mode = <2>; + touchscreen-size-x = <480>; + touchscreen-size-y = <800>; + pinctrl-names = "default"; + pinctrl-0 = <&tsp_default>; + }; + }; + + mcde@a0350000 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&dpi_default_mode>; + + port { + display_out: endpoint { + remote-endpoint = <&panel_in>; + }; + }; + }; + }; +}; + +&pinctrl { + /* + * This extends the MC0_A_2 default config to include + * the card detect GPIO217 line. + */ + sdi0 { + mc0_a_2_default { + default_cfg4 { + pins = "GPIO217_AH12"; /* card detect */ + ste,config = <&gpio_in_pd>; + }; + }; + }; + sdi2 { + /* + * GPIO130 should be set in GPIO mode and + * pulled down. (Not connected.) + */ + mc2_a_1_default { + default_cfg2 { + pins = "GPIO130_C8"; /* FBCLK */ + ste,config = <&gpio_in_pd>; + }; + }; + }; + /* GPIO that enables the 2.9V SD card level translator */ + sd-level-translator { + sd_level_translator_default: sd_level_translator_default { + /* level shifter on GPIO87 */ + codina_cfg1 { + pins = "GPIO87_B3"; + ste,config = <&gpio_out_hi>; + }; + }; + }; + /* GPIO that enables the LDO regulator for the eMMC */ + emmc-ldo { + emmc_ldo_en_default_mode: emmc_ldo_default { + /* LDO enable on GPIO223 */ + codina_cfg1 { + pins = "GPIO223_AH9"; + ste,config = <&gpio_out_hi>; + }; + }; + }; + /* GPIOs for panel control */ + panel { + panel_default_mode: panel_default { + codina_cfg1 { + /* Reset line */ + pins = "GPIO139_C9"; + ste,config = <&gpio_out_lo>; + }; + codina_cfg2 { + /* ESD IRQ line "LCD detect" */ + pins = "GPIO93_B7"; + ste,config = <&gpio_in_nopull>; + }; + }; + }; + /* GPIO that enables the LDO regulator for the LCD display */ + lcd-ldo { + lcd_pwr_en_default_mode: lcd_pwr_en_default { + /* LCD_PWR_EN on GPIO219 */ + codina_cfg1 { + pins = "GPIO219_AG10"; + ste,config = <&gpio_out_hi>; + }; + }; + }; + /* GPIO that enables the WLAN internal LDO regulators */ + wlan-ldo { + wlan_ldo_en_default: wlan_ldo_default { + /* GPIO215 named WLAN_RST_N */ + codina_cfg1 { + pins = "GPIO215_AH13"; + ste,config = <&gpio_out_lo>; + }; + }; + }; + /* Backlight GPIO */ + backlight { + ktd253_backlight_default_mode: backlight_default { + skomer_cfg1 { + pins = "GPIO69_E2"; /* LCD_BL_CTRL */ + ste,config = <&gpio_out_lo>; + }; + }; + }; + /* Flash and torch */ + flash { + gpio_flash_default_mode: flash_default { + codina_cfg1 { + pins = "GPIO140_B11", "GPIO141_C12"; + ste,config = <&gpio_out_lo>; + }; + }; + }; + /* GPIO keys */ + gpio-keys { + gpio_keys_default_mode: gpio_keys_default { + skomer_cfg1 { + pins = "GPIO67_G2", /* VOL UP */ + "GPIO91_B6", /* HOME */ + "GPIO92_D6"; /* VOL DOWN */ + ste,config = <&gpio_in_pu>; + }; + }; + }; + /* Interrupt line for the Zinitix BT404 touchscreen */ + tsp { + tsp_default: tsp_default { + codina_cfg1 { + pins = "GPIO218_AH11"; /* TSP_INT_1V8 */ + ste,config = <&gpio_in_nopull>; + }; + }; + }; + /* Interrupt line for light/proximity sensor TMD2672 */ + tmd2672 { + tmd2672_codina_default: tmd2672_codina { + codina_cfg1 { + pins = "GPIO146_D13"; + ste,config = <&gpio_in_nopull>; + }; + }; + }; + /* GPIO-based I2C bus for subpmu */ + i2c-gpio-0 { + i2c_gpio_0_default: i2c_gpio_0 { + codina_cfg1 { + pins = "GPIO143_D12", "GPIO144_B13"; + ste,config = <&gpio_in_nopull>; + }; + }; + }; + /* GPIO-based I2C bus for the NFC */ + i2c-gpio-1 { + i2c_gpio_1_default: i2c_gpio_1 { + codina_cfg1 { + pins = "GPIO151_D17", "GPIO152_D16"; + ste,config = <&gpio_in_nopull>; + }; + }; + }; + /* GPIO-based SPI bus for the display */ + spi-gpio-0 { + spi_gpio_0_default: spi_gpio_0_d { + codina_cfg1 { + pins = "GPIO220_AH10", "GPIO201_AF24", "GPIO224_AG9"; + ste,config = <&gpio_out_hi>; + }; + codina_cfg2 { + pins = "GPIO225_AG8"; + /* Needs pull down, no pull down resistor on board */ + ste,config = <&gpio_in_pd>; + }; + }; + spi_gpio_0_sleep: spi_gpio_0_s { + codina_cfg1 { + pins = "GPIO220_AH10", "GPIO201_AF24", + "GPIO224_AG9", "GPIO225_AG8"; + ste,config = <&gpio_out_hi>; + }; + }; + }; + wlan { + wlan_default_mode: wlan_default { + /* GPIO216 for WL_HOST_WAKE */ + codina_cfg2 { + pins = "GPIO216_AG12"; + ste,config = <&gpio_in_pd>; + }; + }; + }; + bluetooth { + bluetooth_default_mode: bluetooth_default { + /* GPIO199 BT_WAKE and GPIO222 BT_VREG_ON */ + codina_cfg1 { + pins = "GPIO199_AH23", "GPIO222_AJ9"; + ste,config = <&gpio_out_lo>; + }; + /* GPIO97 BT_HOST_WAKE */ + codina_cfg2 { + pins = "GPIO97_D9"; + ste,config = <&gpio_in_nopull>; + }; + /* GPIO209 BT_RST_N */ + codina_cfg3 { + pins = "GPIO209_AG15"; + ste,config = <&gpio_out_hi>; + }; + }; + }; + vibrator { + vibrator_default: vibrator_default { + codina_cfg1 { + pins = "GPIO195_AG28"; /* MOT_EN */ + ste,config = <&gpio_out_lo>; + }; + }; + }; + mcde { + dpi_default_mode: dpi_default { + default_mux1 { + /* Mux in all the data lines */ + function = "lcd"; + groups = + /* Data lines D0-D7 GPIO70..GPIO77 */ + "lcd_d0_d7_a_1", + /* Data lines D8-D11 GPIO78..GPIO81 */ + "lcd_d8_d11_a_1", + /* Data lines D12-D15 GPIO82..GPIO85 */ + "lcd_d12_d15_a_1", + /* Data lines D16-D23 GPIO161..GPIO168 */ + "lcd_d16_d23_b_1"; + }; + default_mux2 { + function = "lcda"; + /* Clock line on GPIO150, DE, VSO, HSO on GPIO169..GPIO171 */ + groups = "lcdaclk_b_1", "lcda_b_1"; + }; + /* Input, no pull-up is the default state for pins used for an alt function */ + default_cfg1 { + pins = "GPIO150_C14", "GPIO169_D22", "GPIO170_C23", "GPIO171_D23"; + ste,config = <&in_nopull>; + }; + }; + }; +}; diff --git a/arch/arm/boot/dts/ste-ux500-samsung-codina.dts b/arch/arm/boot/dts/ste-ux500-samsung-codina.dts index 1c1725d31c7c..b6746ac167bc 100644 --- a/arch/arm/boot/dts/ste-ux500-samsung-codina.dts +++ b/arch/arm/boot/dts/ste-ux500-samsung-codina.dts @@ -9,9 +9,13 @@ * the boot loader. * * The Samsung tree further talks about GT-I8160P and GT-I8160chn (China). - * The GT-I8160 plain is knonw as the "europe" variant. - * The GT-I8160P appears to not use the ST Microelectronics accelerometer. + * The GT-I8160 plain is known as the "europe" variant. + * The GT-I8160P is the CDMA version and it appears to not use the ST + * Microelectronics accelerometer and reportedly has NFC mounted. * The GT-I8160chn appears to be the same as the europe variant. + * + * There is also the Codina-TMO, Samsung SGH-T599, which has its own device + * tree. */ /dts-v1/; @@ -303,7 +307,22 @@ #address-cells = <1>; #size-cells = <0>; - /* TODO: add the NFC chip here */ + nfc@2b { + /* NXP NFC circuit PN544 C1 marked NXP 44501 */ + compatible = "nxp,pn544-i2c"; + /* IF0, IF1 high, gives I2C address 0x2B */ + reg = <0x2b>; + clock-frequency = <400000>; + /* NFC IRQ on GPIO32 */ + interrupt-parent = <&gpio1>; + interrupts = <0 IRQ_TYPE_EDGE_FALLING>; + /* GPIO 31 */ + firmware-gpios = <&gpio0 31 GPIO_ACTIVE_HIGH>; + /* GPIO88 */ + enable-gpios = <&gpio2 24 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&pn544_codina_default>; + }; }; spi-gpio-0 { @@ -461,10 +480,20 @@ uart@80121000 { status = "okay"; pinctrl-names = "default", "sleep"; - /* CTS/RTS is not used, CTS is repurposed as GPIO */ - pinctrl-0 = <&u1rxtx_a_1_default>; - pinctrl-1 = <&u1rxtx_a_1_sleep>; - /* FIXME: add a device for the GPS here */ + pinctrl-0 = <&u1rxtx_a_1_default &u1ctsrts_a_1_default>; + pinctrl-1 = <&u1rxtx_a_1_sleep &u1ctsrts_a_1_sleep>; + + gnss { + compatible = "brcm,bcm4751"; + /* GPS_RSTN on GPIO21 */ + reset-gpios = <&gpio0 21 GPIO_ACTIVE_LOW>; + /* GPS_ON_OFF on GPIO86 */ + enable-gpios = <&gpio2 22 GPIO_ACTIVE_HIGH>; + /* GPS_1V8 (VSMPS2) */ + vddio-supply = <&db8500_vsmps2_reg>; + pinctrl-names = "default"; + pinctrl-0 = <&bcm4751_codina_default>; + }; }; /* Debugging console UART connected to TSU6111RSVR (FSA880) */ @@ -483,6 +512,10 @@ pinctrl-1 = <&usb_a_1_sleep>; }; + ab8500_fg { + line-impedance-micro-ohms = <36000>; + }; + regulator { ab8500_ldo_aux1 { /* Used for VDD for sensors */ @@ -515,10 +548,9 @@ pinctrl-0 = <&i2c0_a_1_default>; pinctrl-1 = <&i2c0_a_1_sleep>; - /* TODO: write bindings and driver for this proximity sensor */ proximity@39 { - /* Codina has the Mouser TMD2672 */ - compatible = "mouser,tmd2672"; + /* Codina has the Amstaos TMD2672 */ + compatible = "amstaos,tmd2672"; clock-frequency = <400000>; reg = <0x39>; @@ -847,6 +879,34 @@ }; }; }; + nfc { + pn544_codina_default: pn544_codina { + /* Interrupt line */ + codina_cfg1 { + pins = "GPIO32_V2"; + ste,config = <&gpio_in_nopull>; + }; + /* Enable and firmware GPIOs */ + codina_cfg2 { + pins = "GPIO31_V3", "GPIO88_C4"; + ste,config = <&gpio_out_lo>; + }; + }; + }; + bcm4751 { + bcm4751_codina_default: bcm4751_codina { + /* Reset line, start out asserted */ + codina_cfg1 { + pins = "GPIO21_AB3"; + ste,config = <&gpio_out_lo>; + }; + /* GPS_ON_OFF, start out deasserted (off) */ + codina_cfg2 { + pins = "GPIO86_C6"; + ste,config = <&gpio_out_lo>; + }; + }; + }; vibrator { vibrator_default: vibrator_default { codina_cfg1 { diff --git a/arch/arm/boot/dts/ste-ux500-samsung-gavini.dts b/arch/arm/boot/dts/ste-ux500-samsung-gavini.dts index fd170974765f..53062d50e455 100644 --- a/arch/arm/boot/dts/ste-ux500-samsung-gavini.dts +++ b/arch/arm/boot/dts/ste-ux500-samsung-gavini.dts @@ -456,6 +456,10 @@ pinctrl-1 = <&usb_a_1_sleep>; }; + ab8500_fg { + line-impedance-micro-ohms = <43000>; + }; + regulator { ab8500_ldo_aux1 { /* Used for VDD for sensors */ diff --git a/arch/arm/boot/dts/ste-ux500-samsung-golden.dts b/arch/arm/boot/dts/ste-ux500-samsung-golden.dts index 290ab59e863d..b0dce91aff4b 100644 --- a/arch/arm/boot/dts/ste-ux500-samsung-golden.dts +++ b/arch/arm/boot/dts/ste-ux500-samsung-golden.dts @@ -304,6 +304,10 @@ pinctrl-1 = <&usb_a_1_sleep>; }; + ab8500_fg { + line-impedance-micro-ohms = <36000>; + }; + regulator { ab8500_ldo_aux1 { regulator-name = "sensor_3v"; diff --git a/arch/arm/boot/dts/ste-ux500-samsung-janice.dts b/arch/arm/boot/dts/ste-ux500-samsung-janice.dts index 42762bfcd878..e6d4fd0eb5f4 100644 --- a/arch/arm/boot/dts/ste-ux500-samsung-janice.dts +++ b/arch/arm/boot/dts/ste-ux500-samsung-janice.dts @@ -485,7 +485,26 @@ /* CTS/RTS is not used, CTS is repurposed as GPIO */ pinctrl-0 = <&u1rxtx_a_1_default>; pinctrl-1 = <&u1rxtx_a_1_sleep>; - /* FIXME: add a device for the GPS here */ + + gnss { + /* + * The Low Noise Amplifier (LNA) power and enablement is controlled + * autonomously by the GSD4t. + * Janice has a SiRFstarIV-based GSD4t + * Golden has a SiRFstarV 5t-based CSRG05TA03-ICJE-R. + */ + compatible = "csr,gsd4t"; + /* GPS_RSTN on GPIO21 */ + reset-gpios = <&gpio0 21 GPIO_ACTIVE_LOW>; + /* GPS_ON_OFF on GPIO96 */ + sirf,onoff-gpios = <&gpio3 0 GPIO_ACTIVE_HIGH>; + /* GPS_1V8 (VSMPS2) */ + vcc-supply = <&db8500_vsmps2_reg>; + pinctrl-names = "default"; + pinctrl-0 = <&gsd4t_janice_default>; + /* According to /etc/sirfgps.conf */ + current-speed = <460800>; + }; }; /* Debugging console UART connected to TSU6111RSVR (FSA880) */ @@ -504,6 +523,10 @@ pinctrl-1 = <&usb_a_1_sleep>; }; + ab8500_fg { + line-impedance-micro-ohms = <15000>; + }; + regulator { ab8500_ldo_aux1 { /* Used for VDD for sensors */ @@ -941,4 +964,23 @@ }; }; }; + gsd4t { + gsd4t_janice_default: gsd4t_janice { + /* Reset line, start out asserted */ + janice_cfg1 { + pins = "GPIO21_AB3"; + ste,config = <&gpio_out_lo>; + }; + /* GPS_ON_OFF, start out deasserted (off) */ + janice_cfg2 { + pins = "GPIO96_D8"; + ste,config = <&gpio_out_lo>; + }; + /* Unused power enablement line, used in R0.0 and R0.1 boards */ + janice_cfg3 { + pins = "GPIO86_C6"; + ste,config = <&gpio_in_pd>; + }; + }; + }; }; diff --git a/arch/arm/boot/dts/ste-ux500-samsung-kyle.dts b/arch/arm/boot/dts/ste-ux500-samsung-kyle.dts index 2a5bf54137ce..c57676faf181 100644 --- a/arch/arm/boot/dts/ste-ux500-samsung-kyle.dts +++ b/arch/arm/boot/dts/ste-ux500-samsung-kyle.dts @@ -325,6 +325,10 @@ pinctrl-1 = <&usb_a_1_sleep>; }; + ab8500_fg { + line-impedance-micro-ohms = <36000>; + }; + regulator { ab8500_ldo_aux1 { /* Used for VDD for sensors */ diff --git a/arch/arm/boot/dts/ste-ux500-samsung-skomer.dts b/arch/arm/boot/dts/ste-ux500-samsung-skomer.dts index dcb03ce7cbd4..81b341a5ae45 100644 --- a/arch/arm/boot/dts/ste-ux500-samsung-skomer.dts +++ b/arch/arm/boot/dts/ste-ux500-samsung-skomer.dts @@ -281,12 +281,27 @@ }; }; - /* GPF UART */ + /* GPS UART */ uart@80121000 { status = "okay"; pinctrl-names = "default", "sleep"; pinctrl-0 = <&u1rxtx_a_1_default &u1ctsrts_a_1_default>; pinctrl-1 = <&u1rxtx_a_1_sleep &u1ctsrts_a_1_sleep>; + + gnss { + /* The CSRG05TA03-ICJE-R is a SirfStarV 5t chip */ + compatible = "csr,csrg05ta03-icje-r"; + /* GPS_RSTN on GPIO209 */ + reset-gpios = <&gpio6 17 GPIO_ACTIVE_LOW>; + /* GPS_ON_OFF on GPIO86 */ + sirf,onoff-gpios = <&gpio2 22 GPIO_ACTIVE_HIGH>; + /* GPS_1V8 (VSMPS2) */ + vcc-supply = <&db8500_vsmps2_reg>; + pinctrl-names = "default"; + pinctrl-0 = <&g05ta03_skomer_default>; + /* According to /etc/sirfgps.conf */ + current-speed = <460800>; + }; }; /* Debugging console UART connected to AB8505 USB */ @@ -305,6 +320,10 @@ pinctrl-1 = <&usb_a_1_sleep>; }; + ab8500_fg { + line-impedance-micro-ohms = <16000>; + }; + regulator { ab8500_ldo_aux1 { /* Used for VDD for sensors */ @@ -649,6 +668,20 @@ }; }; }; + g05ta03 { + g05ta03_skomer_default: g05ta03 { + /* Reset line, start out de-asserted */ + skomer_cfg1 { + pins = "GPIO209_AG15"; + ste,config = <&gpio_out_hi>; + }; + /* GPS_ON_OFF, start out deasserted (off) */ + skomer_cfg2 { + pins = "GPIO86_C6"; + ste,config = <&gpio_out_lo>; + }; + }; + }; }; &ab8505_gpio { diff --git a/arch/arm/boot/dts/stm32f4-pinctrl.dtsi b/arch/arm/boot/dts/stm32f4-pinctrl.dtsi index 155d9ffacc83..500bcc302d42 100644 --- a/arch/arm/boot/dts/stm32f4-pinctrl.dtsi +++ b/arch/arm/boot/dts/stm32f4-pinctrl.dtsi @@ -45,7 +45,7 @@ / { soc { - pinctrl: pin-controller@40020000 { + pinctrl: pinctrl@40020000 { #address-cells = <1>; #size-cells = <1>; ranges = <0 0x40020000 0x3000>; diff --git a/arch/arm/boot/dts/stm32f7-pinctrl.dtsi b/arch/arm/boot/dts/stm32f7-pinctrl.dtsi index 1cf8a23c2644..8f37aefa7315 100644 --- a/arch/arm/boot/dts/stm32f7-pinctrl.dtsi +++ b/arch/arm/boot/dts/stm32f7-pinctrl.dtsi @@ -9,7 +9,7 @@ / { soc { - pinctrl: pin-controller@40020000 { + pinctrl: pinctrl@40020000 { #address-cells = <1>; #size-cells = <1>; ranges = <0 0x40020000 0x3000>; diff --git a/arch/arm/boot/dts/stm32h743.dtsi b/arch/arm/boot/dts/stm32h743.dtsi index 6e42ca2dada2..91dde07a38ba 100644 --- a/arch/arm/boot/dts/stm32h743.dtsi +++ b/arch/arm/boot/dts/stm32h743.dtsi @@ -583,7 +583,7 @@ status = "disabled"; }; - pinctrl: pin-controller@58020000 { + pinctrl: pinctrl@58020000 { #address-cells = <1>; #size-cells = <1>; compatible = "st,stm32h743-pinctrl"; diff --git a/arch/arm/boot/dts/stm32mp131.dtsi b/arch/arm/boot/dts/stm32mp131.dtsi index 1708c79b5254..f9ebc47e6421 100644 --- a/arch/arm/boot/dts/stm32mp131.dtsi +++ b/arch/arm/boot/dts/stm32mp131.dtsi @@ -75,6 +75,12 @@ compatible = "fixed-clock"; clock-frequency = <99000000>; }; + + clk_rtc_k: clk-rtc-k { + #clock-cells = <0>; + compatible = "fixed-clock"; + clock-frequency = <32768>; + }; }; intc: interrupt-controller@a0021000 { @@ -218,6 +224,15 @@ status = "disabled"; }; + rtc: rtc@5c004000 { + compatible = "st,stm32mp1-rtc"; + reg = <0x5c004000 0x400>; + interrupts-extended = <&exti 19 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clk_pclk4>, <&clk_rtc_k>; + clock-names = "pclk", "rtc_ck"; + status = "disabled"; + }; + bsec: efuse@5c005000 { compatible = "st,stm32mp15-bsec"; reg = <0x5c005000 0x400>; @@ -239,11 +254,13 @@ * Break node order to solve dependency probe issue between * pinctrl and exti. */ - pinctrl: pin-controller@50002000 { + pinctrl: pinctrl@50002000 { #address-cells = <1>; #size-cells = <1>; compatible = "st,stm32mp135-pinctrl"; ranges = <0 0x50002000 0x8400>; + interrupt-parent = <&exti>; + st,syscfg = <&exti 0x60 0xff>; pins-are-numbered; gpioa: gpio@50002000 { diff --git a/arch/arm/boot/dts/stm32mp135f-dk.dts b/arch/arm/boot/dts/stm32mp135f-dk.dts index ee100d108ea2..09d6226d598f 100644 --- a/arch/arm/boot/dts/stm32mp135f-dk.dts +++ b/arch/arm/boot/dts/stm32mp135f-dk.dts @@ -6,6 +6,9 @@ /dts-v1/; +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/input/input.h> +#include <dt-bindings/leds/common.h> #include "stm32mp135.dtsi" #include "stm32mp13xf.dtsi" #include "stm32mp13-pinctrl.dtsi" @@ -23,6 +26,28 @@ reg = <0xc0000000 0x20000000>; }; + gpio-keys { + compatible = "gpio-keys"; + + user-pa13 { + label = "User-PA13"; + linux,code = <BTN_1>; + gpios = <&gpioa 13 (GPIO_ACTIVE_LOW | GPIO_PULL_UP)>; + }; + }; + + leds { + compatible = "gpio-leds"; + + led-blue { + function = LED_FUNCTION_HEARTBEAT; + color = <LED_COLOR_ID_BLUE>; + gpios = <&gpioa 14 GPIO_ACTIVE_LOW>; + linux,default-trigger = "heartbeat"; + default-state = "off"; + }; + }; + vdd_sd: vdd-sd { compatible = "regulator-fixed"; regulator-name = "vdd_sd"; @@ -37,6 +62,10 @@ status = "okay"; }; +&rtc { + status = "okay"; +}; + &sdmmc1 { pinctrl-names = "default", "opendrain", "sleep"; pinctrl-0 = <&sdmmc1_b4_pins_a &sdmmc1_clk_pins_a>; diff --git a/arch/arm/boot/dts/stm32mp15-pinctrl.dtsi b/arch/arm/boot/dts/stm32mp15-pinctrl.dtsi index f0d66d8c6e3b..6052243ad81c 100644 --- a/arch/arm/boot/dts/stm32mp15-pinctrl.dtsi +++ b/arch/arm/boot/dts/stm32mp15-pinctrl.dtsi @@ -379,6 +379,40 @@ }; }; + ethernet0_rmii_pins_c: rmii-2 { + pins1 { + pinmux = <STM32_PINMUX('G', 13, AF11)>, /* ETH1_RMII_TXD0 */ + <STM32_PINMUX('G', 14, AF11)>, /* ETH1_RMII_TXD1 */ + <STM32_PINMUX('B', 11, AF11)>, /* ETH1_RMII_TX_EN */ + <STM32_PINMUX('A', 1, AF11)>, /* ETH1_RMII_REF_CLK */ + <STM32_PINMUX('A', 2, AF11)>, /* ETH1_MDIO */ + <STM32_PINMUX('C', 1, AF11)>; /* ETH1_MDC */ + bias-disable; + drive-push-pull; + slew-rate = <2>; + }; + pins2 { + pinmux = <STM32_PINMUX('C', 4, AF11)>, /* ETH1_RMII_RXD0 */ + <STM32_PINMUX('C', 5, AF11)>, /* ETH1_RMII_RXD1 */ + <STM32_PINMUX('A', 7, AF11)>; /* ETH1_RMII_CRS_DV */ + bias-disable; + }; + }; + + ethernet0_rmii_sleep_pins_c: rmii-sleep-2 { + pins1 { + pinmux = <STM32_PINMUX('G', 13, ANALOG)>, /* ETH1_RMII_TXD0 */ + <STM32_PINMUX('G', 14, ANALOG)>, /* ETH1_RMII_TXD1 */ + <STM32_PINMUX('B', 11, ANALOG)>, /* ETH1_RMII_TX_EN */ + <STM32_PINMUX('A', 2, ANALOG)>, /* ETH1_MDIO */ + <STM32_PINMUX('C', 1, ANALOG)>, /* ETH1_MDC */ + <STM32_PINMUX('C', 4, ANALOG)>, /* ETH1_RMII_RXD0 */ + <STM32_PINMUX('C', 5, ANALOG)>, /* ETH1_RMII_RXD1 */ + <STM32_PINMUX('A', 1, ANALOG)>, /* ETH1_RMII_REF_CLK */ + <STM32_PINMUX('A', 7, ANALOG)>; /* ETH1_RMII_CRS_DV */ + }; + }; + fmc_pins_a: fmc-0 { pins1 { pinmux = <STM32_PINMUX('D', 4, AF12)>, /* FMC_NOE */ @@ -889,6 +923,21 @@ }; }; + mco2_pins_a: mco2-0 { + pins { + pinmux = <STM32_PINMUX('G', 2, AF1)>; /* MCO2 */ + bias-disable; + drive-push-pull; + slew-rate = <2>; + }; + }; + + mco2_sleep_pins_a: mco2-sleep-0 { + pins { + pinmux = <STM32_PINMUX('G', 2, ANALOG)>; /* MCO2 */ + }; + }; + m_can1_pins_a: m-can1-0 { pins1 { pinmux = <STM32_PINMUX('H', 13, AF9)>; /* CAN1_TX */ @@ -2212,4 +2261,19 @@ bias-disable; }; }; + + spi1_pins_b: spi1-1 { + pins1 { + pinmux = <STM32_PINMUX('A', 5, AF5)>, /* SPI1_SCK */ + <STM32_PINMUX('B', 5, AF5)>; /* SPI1_MOSI */ + bias-disable; + drive-push-pull; + slew-rate = <1>; + }; + + pins2 { + pinmux = <STM32_PINMUX('A', 6, AF5)>; /* SPI1_MISO */ + bias-disable; + }; + }; }; diff --git a/arch/arm/boot/dts/stm32mp151.dtsi b/arch/arm/boot/dts/stm32mp151.dtsi index f9aa9af31efd..1b2fd3426a81 100644 --- a/arch/arm/boot/dts/stm32mp151.dtsi +++ b/arch/arm/boot/dts/stm32mp151.dtsi @@ -115,6 +115,33 @@ status = "disabled"; }; + firmware { + optee: optee { + compatible = "linaro,optee-tz"; + method = "smc"; + status = "disabled"; + }; + + scmi: scmi { + compatible = "linaro,scmi-optee"; + #address-cells = <1>; + #size-cells = <0>; + linaro,optee-channel-id = <0>; + shmem = <&scmi_shm>; + status = "disabled"; + + scmi_clk: protocol@14 { + reg = <0x14>; + #clock-cells = <1>; + }; + + scmi_reset: protocol@16 { + reg = <0x16>; + #reset-cells = <1>; + }; + }; + }; + soc { compatible = "simple-bus"; #address-cells = <1>; @@ -122,6 +149,20 @@ interrupt-parent = <&intc>; ranges; + scmi_sram: sram@2ffff000 { + compatible = "mmio-sram"; + reg = <0x2ffff000 0x1000>; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0x2ffff000 0x1000>; + + scmi_shm: scmi-sram@0 { + compatible = "arm,scmi-shmem"; + reg = <0 0x80>; + status = "disabled"; + }; + }; + timers2: timer@40000000 { #address-cells = <1>; #size-cells = <0>; @@ -1623,7 +1664,7 @@ * Break node order to solve dependency probe issue between * pinctrl and exti. */ - pinctrl: pin-controller@50002000 { + pinctrl: pinctrl@50002000 { #address-cells = <1>; #size-cells = <1>; compatible = "st,stm32mp157-pinctrl"; @@ -1754,7 +1795,7 @@ }; }; - pinctrl_z: pin-controller-z@54004000 { + pinctrl_z: pinctrl@54004000 { #address-cells = <1>; #size-cells = <1>; compatible = "st,stm32mp157-z-pinctrl"; diff --git a/arch/arm/boot/dts/stm32mp151a-prtt1a.dts b/arch/arm/boot/dts/stm32mp151a-prtt1a.dts new file mode 100644 index 000000000000..75874eafde11 --- /dev/null +++ b/arch/arm/boot/dts/stm32mp151a-prtt1a.dts @@ -0,0 +1,52 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause) +/* + * Copyright (C) Protonic Holland + * Author: David Jander <david@protonic.nl> + */ +/dts-v1/; + +#include "stm32mp151a-prtt1l.dtsi" + +/ { + model = "Protonic PRTT1A"; + compatible = "prt,prtt1a", "st,stm32mp151"; +}; + +ðernet0 { + phy-handle = <&phy0>; +}; + +&mdio0 { + /* TI DP83TD510E */ + phy0: ethernet-phy@0 { + compatible = "ethernet-phy-id2000.0181"; + reg = <0>; + interrupts-extended = <&gpioa 4 IRQ_TYPE_LEVEL_LOW>; + reset-gpios = <&gpioa 3 GPIO_ACTIVE_LOW>; + reset-assert-us = <10>; + reset-deassert-us = <35>; + }; +}; + +&pwm5_pins_a { + pins { + pinmux = <STM32_PINMUX('A', 0, AF2)>; /* TIM5_CH1 */ + }; +}; + +&pwm5_sleep_pins_a { + pins { + pinmux = <STM32_PINMUX('A', 0, ANALOG)>; /* TIM5_CH1 */ + }; +}; + +&timers5 { + status = "okay"; + + pwm { + pinctrl-0 = <&pwm5_pins_a>; + pinctrl-1 = <&pwm5_sleep_pins_a>; + pinctrl-names = "default", "sleep"; + status = "okay"; + }; +}; diff --git a/arch/arm/boot/dts/stm32mp151a-prtt1c.dts b/arch/arm/boot/dts/stm32mp151a-prtt1c.dts new file mode 100644 index 000000000000..7ecf31263abc --- /dev/null +++ b/arch/arm/boot/dts/stm32mp151a-prtt1c.dts @@ -0,0 +1,304 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause) +/* + * Copyright (C) Protonic Holland + * Author: David Jander <david@protonic.nl> + */ +/dts-v1/; + +#include "stm32mp151a-prtt1l.dtsi" + +/ { + model = "Protonic PRTT1C"; + compatible = "prt,prtt1c", "st,stm32mp151"; + + clock_ksz9031: clock-ksz9031 { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <25000000>; + }; + + clock_sja1105: clock-sja1105 { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <25000000>; + }; + + mdio0: mdio { + compatible = "virtual,mdio-gpio"; + #address-cells = <1>; + #size-cells = <0>; + gpios = <&gpioc 1 GPIO_ACTIVE_HIGH + &gpioa 2 GPIO_ACTIVE_HIGH>; + + }; + + wifi_pwrseq: wifi-pwrseq { + compatible = "mmc-pwrseq-simple"; + reset-gpios = <&gpiod 8 GPIO_ACTIVE_LOW>; + }; +}; + +ðernet0 { + fixed-link { + speed = <100>; + full-duplex; + }; +}; + +&gpioa { + gpio-line-names = + "", "", "", "PHY0_nRESET", "PHY0_nINT", "", "", "", + "", "", "", "", "", "", "", "SPI1_nSS"; +}; + +&gpiod { + gpio-line-names = + "", "", "", "", "", "", "", "", + "WFM_RESET", "", "", "", "", "", "", ""; +}; + +&gpioe { + gpio-line-names = + "SDMMC2_nRESET", "", "", "", "", "", "SPI1_nRESET", "", + "", "", "", "", "WFM_nIRQ", "", "", ""; +}; + +&gpiog { + gpio-line-names = + "", "", "", "", "", "", "", "PHY3_nINT", + "PHY1_nINT", "PHY3_nRESET", "PHY2_nINT", "PHY2_nRESET", + "PHY1_nRESET", "SPE1_PWR", "SPE0_PWR", ""; +}; + +&mdio0 { + /* All this DP83TD510E PHYs can't be probed before switch@0 is + * probed so we need to use compatible with PHYid + */ + /* TI DP83TD510E */ + t1l0_phy: ethernet-phy@6 { + compatible = "ethernet-phy-id2000.0181"; + reg = <6>; + interrupts-extended = <&gpioa 4 IRQ_TYPE_LEVEL_LOW>; + reset-gpios = <&gpioa 3 GPIO_ACTIVE_LOW>; + reset-assert-us = <10>; + reset-deassert-us = <35>; + }; + + /* TI DP83TD510E */ + t1l1_phy: ethernet-phy@7 { + compatible = "ethernet-phy-id2000.0181"; + reg = <7>; + interrupts-extended = <&gpiog 8 IRQ_TYPE_LEVEL_LOW>; + reset-gpios = <&gpiog 12 GPIO_ACTIVE_LOW>; + reset-assert-us = <10>; + reset-deassert-us = <35>; + }; + + /* TI DP83TD510E */ + t1l2_phy: ethernet-phy@10 { + compatible = "ethernet-phy-id2000.0181"; + reg = <10>; + interrupts-extended = <&gpiog 10 IRQ_TYPE_LEVEL_LOW>; + reset-gpios = <&gpiog 11 GPIO_ACTIVE_LOW>; + reset-assert-us = <10>; + reset-deassert-us = <35>; + }; + + /* Micrel KSZ9031 */ + rj45_phy: ethernet-phy@2 { + reg = <2>; + interrupts-extended = <&gpiog 7 IRQ_TYPE_LEVEL_LOW>; + reset-gpios = <&gpiog 9 GPIO_ACTIVE_LOW>; + reset-assert-us = <10000>; + reset-deassert-us = <1000>; + + clocks = <&clock_ksz9031>; + }; +}; + +&qspi { + status = "disabled"; +}; + +&sdmmc2 { + pinctrl-names = "default", "opendrain", "sleep"; + pinctrl-0 = <&sdmmc2_b4_pins_a &sdmmc2_d47_pins_a>; + pinctrl-1 = <&sdmmc2_b4_od_pins_a &sdmmc2_d47_pins_a>; + pinctrl-2 = <&sdmmc2_b4_sleep_pins_a &sdmmc2_d47_sleep_pins_a>; + non-removable; + no-sd; + no-sdio; + no-1-8-v; + st,neg-edge; + bus-width = <8>; + vmmc-supply = <®_3v3>; + vqmmc-supply = <®_3v3>; + status = "okay"; +}; + +&sdmmc2_b4_od_pins_a { + pins1 { + pinmux = <STM32_PINMUX('B', 14, AF9)>, /* SDMMC2_D0 */ + <STM32_PINMUX('B', 7, AF10)>, /* SDMMC2_D1 */ + <STM32_PINMUX('B', 3, AF9)>, /* SDMMC2_D2 */ + <STM32_PINMUX('B', 4, AF9)>; /* SDMMC2_D3 */ + }; +}; + +&sdmmc2_b4_pins_a { + pins1 { + pinmux = <STM32_PINMUX('B', 14, AF9)>, /* SDMMC2_D0 */ + <STM32_PINMUX('B', 7, AF10)>, /* SDMMC2_D1 */ + <STM32_PINMUX('B', 3, AF9)>, /* SDMMC2_D2 */ + <STM32_PINMUX('B', 4, AF9)>, /* SDMMC2_D3 */ + <STM32_PINMUX('G', 6, AF10)>; /* SDMMC2_CMD */ + }; +}; + +&sdmmc2_b4_sleep_pins_a { + pins { + pinmux = <STM32_PINMUX('B', 14, ANALOG)>, /* SDMMC2_D0 */ + <STM32_PINMUX('B', 7, ANALOG)>, /* SDMMC2_D1 */ + <STM32_PINMUX('B', 3, ANALOG)>, /* SDMMC2_D2 */ + <STM32_PINMUX('B', 4, ANALOG)>, /* SDMMC2_D3 */ + <STM32_PINMUX('E', 3, ANALOG)>, /* SDMMC2_CK */ + <STM32_PINMUX('G', 6, ANALOG)>; /* SDMMC2_CMD */ + }; +}; + +&sdmmc2_d47_pins_a { + pins { + pinmux = <STM32_PINMUX('A', 8, AF9)>, /* SDMMC2_D4 */ + <STM32_PINMUX('A', 9, AF10)>, /* SDMMC2_D5 */ + <STM32_PINMUX('C', 6, AF10)>, /* SDMMC2_D6 */ + <STM32_PINMUX('C', 7, AF10)>; /* SDMMC2_D7 */ + }; +}; + +&sdmmc2_d47_sleep_pins_a { + pins { + pinmux = <STM32_PINMUX('A', 8, ANALOG)>, /* SDMMC2_D4 */ + <STM32_PINMUX('A', 9, ANALOG)>, /* SDMMC2_D5 */ + <STM32_PINMUX('C', 6, ANALOG)>, /* SDMMC2_D6 */ + <STM32_PINMUX('D', 3, ANALOG)>; /* SDMMC2_D7 */ + }; +}; + +&sdmmc3 { + pinctrl-names = "default", "opendrain", "sleep"; + pinctrl-0 = <&sdmmc3_b4_pins_b>; + pinctrl-1 = <&sdmmc3_b4_od_pins_b>; + pinctrl-2 = <&sdmmc3_b4_sleep_pins_b>; + non-removable; + no-1-8-v; + st,neg-edge; + bus-width = <4>; + vmmc-supply = <®_3v3>; + vqmmc-supply = <®_3v3>; + mmc-pwrseq = <&wifi_pwrseq>; + #address-cells = <1>; + #size-cells = <0>; + status = "okay"; + + mmc@1 { + compatible = "prt,prtt1c-wfm200", "silabs,wf200"; + reg = <1>; + }; +}; + +&sdmmc3_b4_od_pins_b { + pins1 { + pinmux = <STM32_PINMUX('D', 1, AF10)>, /* SDMMC3_D0 */ + <STM32_PINMUX('D', 4, AF10)>, /* SDMMC3_D1 */ + <STM32_PINMUX('D', 5, AF10)>, /* SDMMC3_D2 */ + <STM32_PINMUX('D', 7, AF10)>; /* SDMMC3_D3 */ + }; +}; + +&sdmmc3_b4_pins_b { + pins1 { + pinmux = <STM32_PINMUX('D', 1, AF10)>, /* SDMMC3_D0 */ + <STM32_PINMUX('D', 4, AF10)>, /* SDMMC3_D1 */ + <STM32_PINMUX('D', 5, AF10)>, /* SDMMC3_D2 */ + <STM32_PINMUX('D', 7, AF10)>, /* SDMMC3_D3 */ + <STM32_PINMUX('D', 0, AF10)>; /* SDMMC3_CMD */ + }; +}; + +&sdmmc3_b4_sleep_pins_b { + pins { + pinmux = <STM32_PINMUX('D', 1, ANALOG)>, /* SDMMC3_D0 */ + <STM32_PINMUX('D', 4, ANALOG)>, /* SDMMC3_D1 */ + <STM32_PINMUX('D', 5, ANALOG)>, /* SDMMC3_D2 */ + <STM32_PINMUX('D', 7, ANALOG)>, /* SDMMC3_D3 */ + <STM32_PINMUX('G', 15, ANALOG)>, /* SDMMC3_CK */ + <STM32_PINMUX('D', 0, ANALOG)>; /* SDMMC3_CMD */ + }; +}; + +&spi1 { + pinctrl-0 = <&spi1_pins_b>; + pinctrl-names = "default"; + cs-gpios = <&gpioa 15 GPIO_ACTIVE_LOW>; + /delete-property/dmas; + /delete-property/dma-names; + status = "okay"; + + switch@0 { + compatible = "nxp,sja1105q"; + reg = <0>; + spi-max-frequency = <4000000>; + spi-rx-delay-us = <1>; + spi-tx-delay-us = <1>; + spi-cpha; + + reset-gpios = <&gpioe 6 GPIO_ACTIVE_LOW>; + + clocks = <&clock_sja1105>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + label = "t1l0"; + phy-mode = "rmii"; + phy-handle = <&t1l0_phy>; + }; + + port@1 { + reg = <1>; + label = "t1l1"; + phy-mode = "rmii"; + phy-handle = <&t1l1_phy>; + }; + + port@2 { + reg = <2>; + label = "t1l2"; + phy-mode = "rmii"; + phy-handle = <&t1l2_phy>; + }; + + port@3 { + reg = <3>; + label = "rj45"; + phy-handle = <&rj45_phy>; + phy-mode = "rgmii-id"; + }; + + port@4 { + reg = <4>; + label = "cpu"; + ethernet = <ðernet0>; + phy-mode = "rmii"; + + fixed-link { + speed = <100>; + full-duplex; + }; + }; + }; + }; +}; diff --git a/arch/arm/boot/dts/stm32mp151a-prtt1l.dtsi b/arch/arm/boot/dts/stm32mp151a-prtt1l.dtsi new file mode 100644 index 000000000000..d865ab5d866b --- /dev/null +++ b/arch/arm/boot/dts/stm32mp151a-prtt1l.dtsi @@ -0,0 +1,229 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause) +/* + * Copyright (C) Protonic Holland + * Author: David Jander <david@protonic.nl> + */ +/dts-v1/; + +#include "stm32mp151.dtsi" +#include "stm32mp15-pinctrl.dtsi" +#include "stm32mp15xxad-pinctrl.dtsi" +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/input/input.h> +#include <dt-bindings/leds/common.h> + +/ { + aliases { + ethernet0 = ðernet0; + mdio-gpio0 = &mdio0; + serial0 = &uart4; + }; + + led-controller-0 { + compatible = "gpio-leds"; + + led-0 { + color = <LED_COLOR_ID_RED>; + function = LED_FUNCTION_INDICATOR; + gpios = <&gpioa 13 GPIO_ACTIVE_LOW>; + }; + + led-1 { + color = <LED_COLOR_ID_GREEN>; + function = LED_FUNCTION_INDICATOR; + gpios = <&gpioa 14 GPIO_ACTIVE_LOW>; + linux,default-trigger = "heartbeat"; + }; + }; + + + /* DP83TD510E PHYs have max MDC rate of 1.75MHz. Since we can't reduce + * stmmac MDC clock without reducing system bus rate, we need to use + * gpio based MDIO bus. + */ + mdio0: mdio { + compatible = "virtual,mdio-gpio"; + #address-cells = <1>; + #size-cells = <0>; + gpios = <&gpioc 1 GPIO_ACTIVE_HIGH + &gpioa 2 GPIO_ACTIVE_HIGH>; + }; + + reg_3v3: regulator-3v3 { + compatible = "regulator-fixed"; + regulator-name = "3v3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; +}; + +&dts { + status = "okay"; +}; + +ðernet0 { + pinctrl-0 = <ðernet0_rmii_pins_a>; + pinctrl-1 = <ðernet0_rmii_sleep_pins_a>; + pinctrl-names = "default", "sleep"; + phy-mode = "rmii"; + status = "okay"; +}; + +ðernet0_rmii_pins_a { + pins1 { + pinmux = <STM32_PINMUX('B', 12, AF11)>, /* ETH1_RMII_TXD0 */ + <STM32_PINMUX('B', 13, AF11)>, /* ETH1_RMII_TXD1 */ + <STM32_PINMUX('B', 11, AF11)>; /* ETH1_RMII_TX_EN */ + }; + pins2 { + pinmux = <STM32_PINMUX('C', 4, AF11)>, /* ETH1_RMII_RXD0 */ + <STM32_PINMUX('C', 5, AF11)>, /* ETH1_RMII_RXD1 */ + <STM32_PINMUX('A', 1, AF11)>, /* ETH1_RMII_REF_CLK input */ + <STM32_PINMUX('A', 7, AF11)>; /* ETH1_RMII_CRS_DV */ + }; +}; + +ðernet0_rmii_sleep_pins_a { + pins1 { + pinmux = <STM32_PINMUX('B', 12, ANALOG)>, /* ETH1_RMII_TXD0 */ + <STM32_PINMUX('B', 13, ANALOG)>, /* ETH1_RMII_TXD1 */ + <STM32_PINMUX('B', 11, ANALOG)>, /* ETH1_RMII_TX_EN */ + <STM32_PINMUX('C', 4, ANALOG)>, /* ETH1_RMII_RXD0 */ + <STM32_PINMUX('C', 5, ANALOG)>, /* ETH1_RMII_RXD1 */ + <STM32_PINMUX('A', 1, ANALOG)>, /* ETH1_RMII_REF_CLK */ + <STM32_PINMUX('A', 7, ANALOG)>; /* ETH1_RMII_CRS_DV */ + }; +}; + +&iwdg2 { + status = "okay"; +}; + +&qspi { + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&qspi_clk_pins_a &qspi_bk1_pins_a>; + pinctrl-1 = <&qspi_clk_sleep_pins_a &qspi_bk1_sleep_pins_a>; + reg = <0x58003000 0x1000>, <0x70000000 0x4000000>; + #address-cells = <1>; + #size-cells = <0>; + status = "okay"; + + flash@0 { + compatible = "spi-nand"; + reg = <0>; + spi-rx-bus-width = <4>; + spi-max-frequency = <104000000>; + #address-cells = <1>; + #size-cells = <1>; + }; +}; + +&qspi_bk1_pins_a { + pins1 { + bias-pull-up; + drive-push-pull; + slew-rate = <1>; + }; +}; + +&rng1 { + status = "okay"; +}; + +&sdmmc1 { + pinctrl-names = "default", "opendrain", "sleep"; + pinctrl-0 = <&sdmmc1_b4_pins_a>; + pinctrl-1 = <&sdmmc1_b4_od_pins_a>; + pinctrl-2 = <&sdmmc1_b4_sleep_pins_a>; + broken-cd; + st,neg-edge; + bus-width = <4>; + vmmc-supply = <®_3v3>; + vqmmc-supply = <®_3v3>; + status = "okay"; +}; + +&sdmmc1_b4_od_pins_a { + pins1 { + bias-pull-up; + }; + pins2 { + bias-pull-up; + }; +}; + +&sdmmc1_b4_pins_a { + pins1 { + bias-pull-up; + }; + pins2 { + bias-pull-up; + }; +}; + +&uart4 { + pinctrl-names = "default", "sleep", "idle"; + pinctrl-0 = <&uart4_pins_a>; + pinctrl-1 = <&uart4_sleep_pins_a>; + pinctrl-2 = <&uart4_idle_pins_a>; + /delete-property/dmas; + /delete-property/dma-names; + status = "okay"; +}; + +&uart4_idle_pins_a { + pins1 { + pinmux = <STM32_PINMUX('B', 9, ANALOG)>; /* UART4_TX */ + }; + pins2 { + pinmux = <STM32_PINMUX('B', 2, AF8)>; /* UART4_RX */ + bias-pull-up; + }; +}; + +&uart4_pins_a { + pins1 { + pinmux = <STM32_PINMUX('B', 9, AF8)>; /* UART4_TX */ + bias-disable; + drive-push-pull; + slew-rate = <0>; + }; + pins2 { + pinmux = <STM32_PINMUX('B', 2, AF8)>; /* UART4_RX */ + bias-pull-up; + }; +}; + +&uart4_sleep_pins_a { + pins { + pinmux = <STM32_PINMUX('B', 9, ANALOG)>, /* UART4_TX */ + <STM32_PINMUX('B', 2, ANALOG)>; /* UART4_RX */ + }; +}; + +&usbh_ehci { + phys = <&usbphyc_port0>; + phy-names = "usb"; + status = "okay"; +}; + +&usbotg_hs { + dr_mode = "host"; + pinctrl-0 = <&usbotg_hs_pins_a>; + pinctrl-names = "default"; + phys = <&usbphyc_port1 0>; + phy-names = "usb2-phy"; + status = "okay"; +}; + +&usbphyc { + status = "okay"; +}; + +&usbphyc_port0 { + phy-supply = <®_3v3>; +}; + +&usbphyc_port1 { + phy-supply = <®_3v3>; +}; diff --git a/arch/arm/boot/dts/stm32mp151a-prtt1s.dts b/arch/arm/boot/dts/stm32mp151a-prtt1s.dts new file mode 100644 index 000000000000..ad25929e64e6 --- /dev/null +++ b/arch/arm/boot/dts/stm32mp151a-prtt1s.dts @@ -0,0 +1,63 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause) +/* + * Copyright (C) Protonic Holland + * Author: David Jander <david@protonic.nl> + */ +/dts-v1/; + +#include "stm32mp151a-prtt1l.dtsi" + +/ { + model = "Protonic PRTT1S"; + compatible = "prt,prtt1s", "st,stm32mp151"; +}; + +ðernet0 { + phy-handle = <&phy0>; +}; + +&i2c1 { + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&i2c1_pins_a>; + pinctrl-1 = <&i2c1_sleep_pins_a>; + clock-frequency = <100000>; + /delete-property/dmas; + /delete-property/dma-names; + status = "okay"; + + humidity-sensor@40 { + compatible = "ti,hdc1080"; + reg = <0x40>; + }; + + co2-sensor@62 { + compatible = "sensirion,scd41"; + reg = <0x62>; + }; +}; + +&i2c1_pins_a { + pins { + pinmux = <STM32_PINMUX('D', 12, AF5)>, /* I2C1_SCL */ + <STM32_PINMUX('D', 13, AF5)>; /* I2C1_SDA */ + }; +}; + +&i2c1_sleep_pins_a { + pins { + pinmux = <STM32_PINMUX('D', 12, ANALOG)>, /* I2C1_SCL */ + <STM32_PINMUX('D', 13, ANALOG)>; /* I2C1_SDA */ + }; +}; + +&mdio0 { + /* TI DP83TD510E */ + phy0: ethernet-phy@0 { + compatible = "ethernet-phy-id2000.0181"; + reg = <0>; + interrupts-extended = <&gpioa 4 IRQ_TYPE_LEVEL_LOW>; + reset-gpios = <&gpioa 3 GPIO_ACTIVE_LOW>; + reset-assert-us = <10>; + reset-deassert-us = <35>; + }; +}; diff --git a/arch/arm/boot/dts/stm32mp157a-dk1-scmi.dts b/arch/arm/boot/dts/stm32mp157a-dk1-scmi.dts new file mode 100644 index 000000000000..e3d3f3f30c7d --- /dev/null +++ b/arch/arm/boot/dts/stm32mp157a-dk1-scmi.dts @@ -0,0 +1,86 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause) +/* + * Copyright (C) STMicroelectronics 2022 - All Rights Reserved + * Author: Alexandre Torgue <alexandre.torgue@foss.st.com> for STMicroelectronics. + */ + +/dts-v1/; + +#include "stm32mp157a-dk1.dts" + +/ { + model = "STMicroelectronics STM32MP157A-DK1 SCMI Discovery Board"; + compatible = "st,stm32mp157a-dk1-scmi", "st,stm32mp157a-dk1", "st,stm32mp157"; + + reserved-memory { + optee@de000000 { + reg = <0xde000000 0x2000000>; + no-map; + }; + }; +}; + +&cpu0 { + clocks = <&scmi_clk CK_SCMI_MPU>; +}; + +&cpu1 { + clocks = <&scmi_clk CK_SCMI_MPU>; +}; + +&gpioz { + clocks = <&scmi_clk CK_SCMI_GPIOZ>; +}; + +&hash1 { + clocks = <&scmi_clk CK_SCMI_HASH1>; + resets = <&scmi_reset RST_SCMI_HASH1>; +}; + +&i2c4 { + clocks = <&scmi_clk CK_SCMI_I2C4>; + resets = <&scmi_reset RST_SCMI_I2C4>; +}; + +&iwdg2 { + clocks = <&rcc IWDG2>, <&scmi_clk CK_SCMI_LSI>; +}; + +&mdma1 { + resets = <&scmi_reset RST_SCMI_MDMA>; +}; + +&mlahb { + resets = <&scmi_reset RST_SCMI_MCU>; +}; + +&optee { + status = "okay"; +}; + +&rcc { + compatible = "st,stm32mp1-rcc-secure", "syscon"; + clock-names = "hse", "hsi", "csi", "lse", "lsi"; + clocks = <&scmi_clk CK_SCMI_HSE>, + <&scmi_clk CK_SCMI_HSI>, + <&scmi_clk CK_SCMI_CSI>, + <&scmi_clk CK_SCMI_LSE>, + <&scmi_clk CK_SCMI_LSI>; +}; + +&rng1 { + clocks = <&scmi_clk CK_SCMI_RNG1>; + resets = <&scmi_reset RST_SCMI_RNG1>; +}; + +&rtc { + clocks = <&scmi_clk CK_SCMI_RTCAPB>, <&scmi_clk CK_SCMI_RTC>; +}; + +&scmi { + status = "okay"; +}; + +&scmi_shm { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/stm32mp157c-dk2-scmi.dts b/arch/arm/boot/dts/stm32mp157c-dk2-scmi.dts new file mode 100644 index 000000000000..45dcd299aa9e --- /dev/null +++ b/arch/arm/boot/dts/stm32mp157c-dk2-scmi.dts @@ -0,0 +1,95 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause) +/* + * Copyright (C) STMicroelectronics 2022 - All Rights Reserved + * Author: Alexandre Torgue <alexandre.torgue@foss.st.com> for STMicroelectronics. + */ + +/dts-v1/; + +#include "stm32mp157c-dk2.dts" + +/ { + model = "STMicroelectronics STM32MP157C-DK2 SCMI Discovery Board"; + compatible = "st,stm32mp157c-dk2-scmi", "st,stm32mp157c-dk2", "st,stm32mp157"; + + reserved-memory { + optee@de000000 { + reg = <0xde000000 0x2000000>; + no-map; + }; + }; +}; + +&cpu0 { + clocks = <&scmi_clk CK_SCMI_MPU>; +}; + +&cpu1 { + clocks = <&scmi_clk CK_SCMI_MPU>; +}; + +&cryp1 { + clocks = <&scmi_clk CK_SCMI_CRYP1>; + resets = <&scmi_reset RST_SCMI_CRYP1>; +}; + +&dsi { + clocks = <&rcc DSI_K>, <&scmi_clk CK_SCMI_HSE>, <&rcc DSI_PX>; +}; + +&gpioz { + clocks = <&scmi_clk CK_SCMI_GPIOZ>; +}; + +&hash1 { + clocks = <&scmi_clk CK_SCMI_HASH1>; + resets = <&scmi_reset RST_SCMI_HASH1>; +}; + +&i2c4 { + clocks = <&scmi_clk CK_SCMI_I2C4>; + resets = <&scmi_reset RST_SCMI_I2C4>; +}; + +&iwdg2 { + clocks = <&rcc IWDG2>, <&scmi_clk CK_SCMI_LSI>; +}; + +&mdma1 { + resets = <&scmi_reset RST_SCMI_MDMA>; +}; + +&mlahb { + resets = <&scmi_reset RST_SCMI_MCU>; +}; + +&optee { + status = "okay"; +}; + +&rcc { + compatible = "st,stm32mp1-rcc-secure", "syscon"; + clock-names = "hse", "hsi", "csi", "lse", "lsi"; + clocks = <&scmi_clk CK_SCMI_HSE>, + <&scmi_clk CK_SCMI_HSI>, + <&scmi_clk CK_SCMI_CSI>, + <&scmi_clk CK_SCMI_LSE>, + <&scmi_clk CK_SCMI_LSI>; +}; + +&rng1 { + clocks = <&scmi_clk CK_SCMI_RNG1>; + resets = <&scmi_reset RST_SCMI_RNG1>; +}; + +&rtc { + clocks = <&scmi_clk CK_SCMI_RTCAPB>, <&scmi_clk CK_SCMI_RTC>; +}; + +&scmi { + status = "okay"; +}; + +&scmi_shm { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/stm32mp157c-ed1-scmi.dts b/arch/arm/boot/dts/stm32mp157c-ed1-scmi.dts new file mode 100644 index 000000000000..458e0ca3cded --- /dev/null +++ b/arch/arm/boot/dts/stm32mp157c-ed1-scmi.dts @@ -0,0 +1,91 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause) +/* + * Copyright (C) STMicroelectronics 2022 - All Rights Reserved + * Author: Alexandre Torgue <alexandre.torgue@foss.st.com> for STMicroelectronics. + */ + +/dts-v1/; + +#include "stm32mp157c-ed1.dts" + +/ { + model = "STMicroelectronics STM32MP157C-ED1 SCMI eval daughter"; + compatible = "st,stm32mp157c-ed1-scmi", "st,stm32mp157c-ed1", "st,stm32mp157"; + + reserved-memory { + optee@fe000000 { + reg = <0xfe000000 0x2000000>; + no-map; + }; + }; +}; + +&cpu0 { + clocks = <&scmi_clk CK_SCMI_MPU>; +}; + +&cpu1 { + clocks = <&scmi_clk CK_SCMI_MPU>; +}; + +&cryp1 { + clocks = <&scmi_clk CK_SCMI_CRYP1>; + resets = <&scmi_reset RST_SCMI_CRYP1>; +}; + +&gpioz { + clocks = <&scmi_clk CK_SCMI_GPIOZ>; +}; + +&hash1 { + clocks = <&scmi_clk CK_SCMI_HASH1>; + resets = <&scmi_reset RST_SCMI_HASH1>; +}; + +&i2c4 { + clocks = <&scmi_clk CK_SCMI_I2C4>; + resets = <&scmi_reset RST_SCMI_I2C4>; +}; + +&iwdg2 { + clocks = <&rcc IWDG2>, <&scmi_clk CK_SCMI_LSI>; +}; + +&mdma1 { + resets = <&scmi_reset RST_SCMI_MDMA>; +}; + +&mlahb { + resets = <&scmi_reset RST_SCMI_MCU>; +}; + +&optee { + status = "okay"; +}; + +&rcc { + compatible = "st,stm32mp1-rcc-secure", "syscon"; + clock-names = "hse", "hsi", "csi", "lse", "lsi"; + clocks = <&scmi_clk CK_SCMI_HSE>, + <&scmi_clk CK_SCMI_HSI>, + <&scmi_clk CK_SCMI_CSI>, + <&scmi_clk CK_SCMI_LSE>, + <&scmi_clk CK_SCMI_LSI>; +}; + +&rng1 { + clocks = <&scmi_clk CK_SCMI_RNG1>; + resets = <&scmi_reset RST_SCMI_RNG1>; +}; + +&rtc { + clocks = <&scmi_clk CK_SCMI_RTCAPB>, <&scmi_clk CK_SCMI_RTC>; +}; + +&scmi { + status = "okay"; +}; + +&scmi_shm { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/stm32mp157c-ev1-scmi.dts b/arch/arm/boot/dts/stm32mp157c-ev1-scmi.dts new file mode 100644 index 000000000000..df9c113edb4b --- /dev/null +++ b/arch/arm/boot/dts/stm32mp157c-ev1-scmi.dts @@ -0,0 +1,100 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause) +/* + * Copyright (C) STMicroelectronics 2022 - All Rights Reserved + * Author: Alexandre Torgue <alexandre.torgue@foss.st.com> for STMicroelectronics. + */ + +/dts-v1/; + +#include "stm32mp157c-ev1.dts" + +/ { + model = "STMicroelectronics STM32MP157C-EV1 SCMI eval daughter on eval mother"; + compatible = "st,stm32mp157c-ev1-scmi", "st,stm32mp157c-ev1", "st,stm32mp157c-ed1", + "st,stm32mp157"; + + reserved-memory { + optee@fe000000 { + reg = <0xfe000000 0x2000000>; + no-map; + }; + }; +}; + +&cpu0 { + clocks = <&scmi_clk CK_SCMI_MPU>; +}; + +&cpu1 { + clocks = <&scmi_clk CK_SCMI_MPU>; +}; + +&cryp1 { + clocks = <&scmi_clk CK_SCMI_CRYP1>; + resets = <&scmi_reset RST_SCMI_CRYP1>; +}; + +&dsi { + clocks = <&rcc DSI_K>, <&scmi_clk CK_SCMI_HSE>, <&rcc DSI_PX>; +}; + +&gpioz { + clocks = <&scmi_clk CK_SCMI_GPIOZ>; +}; + +&hash1 { + clocks = <&scmi_clk CK_SCMI_HASH1>; + resets = <&scmi_reset RST_SCMI_HASH1>; +}; + +&i2c4 { + clocks = <&scmi_clk CK_SCMI_I2C4>; + resets = <&scmi_reset RST_SCMI_I2C4>; +}; + +&iwdg2 { + clocks = <&rcc IWDG2>, <&scmi_clk CK_SCMI_LSI>; +}; + +&m_can1 { + clocks = <&scmi_clk CK_SCMI_HSE>, <&rcc FDCAN_K>; +}; + +&mdma1 { + resets = <&scmi_reset RST_SCMI_MDMA>; +}; + +&mlahb { + resets = <&scmi_reset RST_SCMI_MCU>; +}; + +&optee { + status = "okay"; +}; + +&rcc { + compatible = "st,stm32mp1-rcc-secure", "syscon"; + clock-names = "hse", "hsi", "csi", "lse", "lsi"; + clocks = <&scmi_clk CK_SCMI_HSE>, + <&scmi_clk CK_SCMI_HSI>, + <&scmi_clk CK_SCMI_CSI>, + <&scmi_clk CK_SCMI_LSE>, + <&scmi_clk CK_SCMI_LSI>; +}; + +&rng1 { + clocks = <&scmi_clk CK_SCMI_RNG1>; + resets = <&scmi_reset RST_SCMI_RNG1>; +}; + +&rtc { + clocks = <&scmi_clk CK_SCMI_RTCAPB>, <&scmi_clk CK_SCMI_RTC>; +}; + +&scmi { + status = "okay"; +}; + +&scmi_shm { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/stm32mp15xx-dhcom-som.dtsi b/arch/arm/boot/dts/stm32mp15xx-dhcom-som.dtsi index 83e2c87713f8..238a611192e7 100644 --- a/arch/arm/boot/dts/stm32mp15xx-dhcom-som.dtsi +++ b/arch/arm/boot/dts/stm32mp15xx-dhcom-som.dtsi @@ -118,13 +118,12 @@ ðernet0 { status = "okay"; - pinctrl-0 = <ðernet0_rmii_pins_a>; - pinctrl-1 = <ðernet0_rmii_sleep_pins_a>; + pinctrl-0 = <ðernet0_rmii_pins_c &mco2_pins_a>; + pinctrl-1 = <ðernet0_rmii_sleep_pins_c &mco2_sleep_pins_a>; pinctrl-names = "default", "sleep"; phy-mode = "rmii"; max-speed = <100>; phy-handle = <&phy0>; - st,eth-ref-clk-sel; mdio0 { #address-cells = <1>; @@ -136,7 +135,7 @@ /* LAN8710Ai */ compatible = "ethernet-phy-id0007.c0f0", "ethernet-phy-ieee802.3-c22"; - clocks = <&rcc ETHCK_K>; + clocks = <&rcc CK_MCO2>; reset-gpios = <&gpioh 3 GPIO_ACTIVE_LOW>; reset-assert-us = <500>; reset-deassert-us = <500>; @@ -446,6 +445,21 @@ }; }; +&rcc { + /* Connect MCO2 output to ETH_RX_CLK input via pad-pad connection */ + clocks = <&rcc CK_MCO2>; + clock-names = "ETH_RX_CLK/ETH_REF_CLK"; + + /* + * Set PLL4P output to 100 MHz to supply SDMMC with faster clock, + * set MCO2 output to 50 MHz to supply ETHRX clock with PLL4P/2, + * so that MCO2 behaves as a divider for the ETHRX clock here. + */ + assigned-clocks = <&rcc CK_MCO2>, <&rcc PLL4_P>; + assigned-clock-parents = <&rcc PLL4_P>; + assigned-clock-rates = <50000000>, <100000000>; +}; + &rng1 { status = "okay"; }; diff --git a/arch/arm/boot/dts/stm32mp15xx-dhcor-avenger96.dtsi b/arch/arm/boot/dts/stm32mp15xx-dhcor-avenger96.dtsi index 61e17f44ce81..76c54b006d87 100644 --- a/arch/arm/boot/dts/stm32mp15xx-dhcor-avenger96.dtsi +++ b/arch/arm/boot/dts/stm32mp15xx-dhcor-avenger96.dtsi @@ -141,6 +141,7 @@ compatible = "snps,dwmac-mdio"; reset-gpios = <&gpioz 2 GPIO_ACTIVE_LOW>; reset-delay-us = <1000>; + reset-post-delay-us = <1000>; phy0: ethernet-phy@7 { reg = <7>; diff --git a/arch/arm/boot/dts/sun8i-h3-nanopi.dtsi b/arch/arm/boot/dts/sun8i-h3-nanopi.dtsi index fc45d5aaa67f..a9f749f49beb 100644 --- a/arch/arm/boot/dts/sun8i-h3-nanopi.dtsi +++ b/arch/arm/boot/dts/sun8i-h3-nanopi.dtsi @@ -75,7 +75,6 @@ r_gpio_keys { compatible = "gpio-keys"; - input-name = "k1"; k1 { label = "k1"; diff --git a/arch/arm/boot/dts/suniv-f1c100s-licheepi-nano.dts b/arch/arm/boot/dts/suniv-f1c100s-licheepi-nano.dts index a1154e6c7cb5..04e59b8381cb 100644 --- a/arch/arm/boot/dts/suniv-f1c100s-licheepi-nano.dts +++ b/arch/arm/boot/dts/suniv-f1c100s-licheepi-nano.dts @@ -11,12 +11,43 @@ compatible = "licheepi,licheepi-nano", "allwinner,suniv-f1c100s"; aliases { + mmc0 = &mmc0; serial0 = &uart0; + spi0 = &spi0; }; chosen { stdout-path = "serial0:115200n8"; }; + + reg_vcc3v3: vcc3v3 { + compatible = "regulator-fixed"; + regulator-name = "vcc3v3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; +}; + +&mmc0 { + broken-cd; + bus-width = <4>; + disable-wp; + status = "okay"; + vmmc-supply = <®_vcc3v3>; +}; + +&spi0 { + pinctrl-names = "default"; + pinctrl-0 = <&spi0_pc_pins>; + status = "okay"; + + flash@0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "winbond,w25q128", "jedec,spi-nor"; + reg = <0>; + spi-max-frequency = <40000000>; + }; }; &uart0 { diff --git a/arch/arm/boot/dts/suniv-f1c100s.dtsi b/arch/arm/boot/dts/suniv-f1c100s.dtsi index 6100d3b75f61..0edc1724407b 100644 --- a/arch/arm/boot/dts/suniv-f1c100s.dtsi +++ b/arch/arm/boot/dts/suniv-f1c100s.dtsi @@ -4,6 +4,9 @@ * Copyright 2018 Mesih Kilinc <mesihkilinc@gmail.com> */ +#include <dt-bindings/clock/suniv-ccu-f1c100s.h> +#include <dt-bindings/reset/suniv-ccu-f1c100s.h> + / { #address-cells = <1>; #size-cells = <1>; @@ -26,9 +29,13 @@ }; cpus { - cpu { + #address-cells = <1>; + #size-cells = <0>; + + cpu@0 { compatible = "arm,arm926ej-s"; device_type = "cpu"; + reg = <0x0>; }; }; @@ -62,6 +69,70 @@ }; }; + spi0: spi@1c05000 { + compatible = "allwinner,suniv-f1c100s-spi", + "allwinner,sun8i-h3-spi"; + reg = <0x01c05000 0x1000>; + interrupts = <10>; + clocks = <&ccu CLK_BUS_SPI0>, <&ccu CLK_BUS_SPI0>; + clock-names = "ahb", "mod"; + resets = <&ccu RST_BUS_SPI0>; + status = "disabled"; + num-cs = <1>; + #address-cells = <1>; + #size-cells = <0>; + }; + + spi1: spi@1c06000 { + compatible = "allwinner,suniv-f1c100s-spi", + "allwinner,sun8i-h3-spi"; + reg = <0x01c06000 0x1000>; + interrupts = <11>; + clocks = <&ccu CLK_BUS_SPI1>, <&ccu CLK_BUS_SPI1>; + clock-names = "ahb", "mod"; + resets = <&ccu RST_BUS_SPI1>; + status = "disabled"; + num-cs = <1>; + #address-cells = <1>; + #size-cells = <0>; + }; + + mmc0: mmc@1c0f000 { + compatible = "allwinner,suniv-f1c100s-mmc", + "allwinner,sun7i-a20-mmc"; + reg = <0x01c0f000 0x1000>; + clocks = <&ccu CLK_BUS_MMC0>, + <&ccu CLK_MMC0>, + <&ccu CLK_MMC0_OUTPUT>, + <&ccu CLK_MMC0_SAMPLE>; + clock-names = "ahb", "mmc", "output", "sample"; + resets = <&ccu RST_BUS_MMC0>; + reset-names = "ahb"; + interrupts = <23>; + pinctrl-names = "default"; + pinctrl-0 = <&mmc0_pins>; + status = "disabled"; + #address-cells = <1>; + #size-cells = <0>; + }; + + mmc1: mmc@1c10000 { + compatible = "allwinner,suniv-f1c100s-mmc", + "allwinner,sun7i-a20-mmc"; + reg = <0x01c10000 0x1000>; + clocks = <&ccu CLK_BUS_MMC1>, + <&ccu CLK_MMC1>, + <&ccu CLK_MMC1_OUTPUT>, + <&ccu CLK_MMC1_SAMPLE>; + clock-names = "ahb", "mmc", "output", "sample"; + resets = <&ccu RST_BUS_MMC1>; + reset-names = "ahb"; + interrupts = <24>; + status = "disabled"; + #address-cells = <1>; + #size-cells = <0>; + }; + ccu: clock@1c20000 { compatible = "allwinner,suniv-f1c100s-ccu"; reg = <0x01c20000 0x400>; @@ -82,13 +153,24 @@ compatible = "allwinner,suniv-f1c100s-pinctrl"; reg = <0x01c20800 0x400>; interrupts = <38>, <39>, <40>; - clocks = <&ccu 37>, <&osc24M>, <&osc32k>; + clocks = <&ccu CLK_BUS_PIO>, <&osc24M>, <&osc32k>; clock-names = "apb", "hosc", "losc"; gpio-controller; interrupt-controller; #interrupt-cells = <3>; #gpio-cells = <3>; + mmc0_pins: mmc0-pins { + pins = "PF0", "PF1", "PF2", "PF3", "PF4", "PF5"; + function = "mmc0"; + drive-strength = <30>; + }; + + spi0_pc_pins: spi0-pc-pins { + pins = "PC0", "PC1", "PC2", "PC3"; + function = "spi0"; + }; + uart0_pe_pins: uart0-pe-pins { pins = "PE0", "PE1"; function = "uart0"; @@ -98,14 +180,16 @@ timer@1c20c00 { compatible = "allwinner,suniv-f1c100s-timer"; reg = <0x01c20c00 0x90>; - interrupts = <13>; + interrupts = <13>, <14>, <15>; clocks = <&osc24M>; }; wdt: watchdog@1c20ca0 { compatible = "allwinner,suniv-f1c100s-wdt", - "allwinner,sun4i-a10-wdt"; + "allwinner,sun6i-a31-wdt"; reg = <0x01c20ca0 0x20>; + interrupts = <16>; + clocks = <&osc32k>; }; uart0: serial@1c25000 { @@ -114,8 +198,8 @@ interrupts = <1>; reg-shift = <2>; reg-io-width = <4>; - clocks = <&ccu 38>; - resets = <&ccu 24>; + clocks = <&ccu CLK_BUS_UART0>; + resets = <&ccu RST_BUS_UART0>; status = "disabled"; }; @@ -125,8 +209,8 @@ interrupts = <2>; reg-shift = <2>; reg-io-width = <4>; - clocks = <&ccu 39>; - resets = <&ccu 25>; + clocks = <&ccu CLK_BUS_UART1>; + resets = <&ccu RST_BUS_UART1>; status = "disabled"; }; @@ -136,8 +220,8 @@ interrupts = <3>; reg-shift = <2>; reg-io-width = <4>; - clocks = <&ccu 40>; - resets = <&ccu 26>; + clocks = <&ccu CLK_BUS_UART2>; + resets = <&ccu RST_BUS_UART2>; status = "disabled"; }; }; diff --git a/arch/arm/boot/dts/zynq-7000.dtsi b/arch/arm/boot/dts/zynq-7000.dtsi index 47c2a4b14c06..c193264a86ff 100644 --- a/arch/arm/boot/dts/zynq-7000.dtsi +++ b/arch/arm/boot/dts/zynq-7000.dtsi @@ -343,8 +343,6 @@ <0 40 4>, <0 41 4>, <0 42 4>, <0 43 4>; #dma-cells = <1>; - #dma-channels = <8>; - #dma-requests = <4>; clocks = <&clkc 27>; clock-names = "apb_pclk"; }; diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a64-olinuxino.dts b/arch/arm64/boot/dts/allwinner/sun50i-a64-olinuxino.dts index ec7e2c0e82c1..bfb806cf6d7a 100644 --- a/arch/arm64/boot/dts/allwinner/sun50i-a64-olinuxino.dts +++ b/arch/arm64/boot/dts/allwinner/sun50i-a64-olinuxino.dts @@ -58,6 +58,15 @@ }; }; +&codec { + status = "okay"; +}; + +&codec_analog { + cpvdd-supply = <®_eldo1>; + status = "okay"; +}; + &cpu0 { cpu-supply = <®_dcdc2>; }; @@ -74,6 +83,10 @@ cpu-supply = <®_dcdc2>; }; +&dai { + status = "okay"; +}; + &de { status = "okay"; }; @@ -328,6 +341,23 @@ vcc-hdmi-supply = <®_dldo1>; }; +&sound { + simple-audio-card,aux-devs = <&codec_analog>; + simple-audio-card,widgets = "Microphone", "Microphone Jack Left", + "Microphone", "Microphone Jack Right", + "Headphone", "Headphone Jack"; + simple-audio-card,routing = "Left DAC", "DACL", + "Right DAC", "DACR", + "Headphone Jack", "HP", + "ADCL", "Left ADC", + "ADCR", "Right ADC", + "Microphone Jack Left", "MBIAS", + "MIC1", "Microphone Jack Left", + "Microphone Jack Right", "MBIAS", + "MIC2", "Microphone Jack Right"; + status = "okay"; +}; + &uart0 { pinctrl-names = "default"; pinctrl-0 = <&uart0_pb_pins>; diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a64-teres-i.dts b/arch/arm64/boot/dts/allwinner/sun50i-a64-teres-i.dts index aff0660b899c..1128030e4c25 100644 --- a/arch/arm64/boot/dts/allwinner/sun50i-a64-teres-i.dts +++ b/arch/arm64/boot/dts/allwinner/sun50i-a64-teres-i.dts @@ -197,6 +197,14 @@ status = "okay"; }; +&pio { + vcc-pc-supply = <®_dcdc1>; + vcc-pd-supply = <®_dldo2>; + vcc-pe-supply = <®_aldo1>; + vcc-pf-supply = <®_dcdc1>; /* No dedicated supply-pin for this */ + vcc-pg-supply = <®_aldo2>; +}; + &pwm { status = "okay"; }; diff --git a/arch/arm64/boot/dts/altera/socfpga_stratix10.dtsi b/arch/arm64/boot/dts/altera/socfpga_stratix10.dtsi index 884bda106399..aa2bba75265f 100644 --- a/arch/arm64/boot/dts/altera/socfpga_stratix10.dtsi +++ b/arch/arm64/boot/dts/altera/socfpga_stratix10.dtsi @@ -346,8 +346,6 @@ <0 88 4>, <0 89 4>; #dma-cells = <1>; - #dma-channels = <8>; - #dma-requests = <32>; clocks = <&clkmgr STRATIX10_L4_MAIN_CLK>; clock-names = "apb_pclk"; resets = <&rst DMA_RESET>, <&rst DMA_OCP_RESET>; diff --git a/arch/arm64/boot/dts/amlogic/Makefile b/arch/arm64/boot/dts/amlogic/Makefile index 0eec18678311..8773211df50e 100644 --- a/arch/arm64/boot/dts/amlogic/Makefile +++ b/arch/arm64/boot/dts/amlogic/Makefile @@ -1,17 +1,18 @@ # SPDX-License-Identifier: GPL-2.0 -dtb-$(CONFIG_ARCH_MESON) += meson-axg-s400.dtb +dtb-$(CONFIG_ARCH_MESON) += meson-a1-ad401.dtb dtb-$(CONFIG_ARCH_MESON) += meson-axg-jethome-jethub-j100.dtb +dtb-$(CONFIG_ARCH_MESON) += meson-axg-s400.dtb dtb-$(CONFIG_ARCH_MESON) += meson-g12a-radxa-zero.dtb dtb-$(CONFIG_ARCH_MESON) += meson-g12a-sei510.dtb dtb-$(CONFIG_ARCH_MESON) += meson-g12a-u200.dtb dtb-$(CONFIG_ARCH_MESON) += meson-g12a-x96-max.dtb +dtb-$(CONFIG_ARCH_MESON) += meson-g12b-a311d-khadas-vim3.dtb dtb-$(CONFIG_ARCH_MESON) += meson-g12b-gsking-x.dtb -dtb-$(CONFIG_ARCH_MESON) += meson-g12b-gtking.dtb dtb-$(CONFIG_ARCH_MESON) += meson-g12b-gtking-pro.dtb -dtb-$(CONFIG_ARCH_MESON) += meson-g12b-a311d-khadas-vim3.dtb -dtb-$(CONFIG_ARCH_MESON) += meson-g12b-s922x-khadas-vim3.dtb -dtb-$(CONFIG_ARCH_MESON) += meson-g12b-odroid-n2.dtb +dtb-$(CONFIG_ARCH_MESON) += meson-g12b-gtking.dtb dtb-$(CONFIG_ARCH_MESON) += meson-g12b-odroid-n2-plus.dtb +dtb-$(CONFIG_ARCH_MESON) += meson-g12b-odroid-n2.dtb +dtb-$(CONFIG_ARCH_MESON) += meson-g12b-s922x-khadas-vim3.dtb dtb-$(CONFIG_ARCH_MESON) += meson-g12b-ugoos-am6.dtb dtb-$(CONFIG_ARCH_MESON) += meson-gxbb-kii-pro.dtb dtb-$(CONFIG_ARCH_MESON) += meson-gxbb-nanopi-k2.dtb @@ -19,29 +20,29 @@ dtb-$(CONFIG_ARCH_MESON) += meson-gxbb-nexbox-a95x.dtb dtb-$(CONFIG_ARCH_MESON) += meson-gxbb-odroidc2.dtb dtb-$(CONFIG_ARCH_MESON) += meson-gxbb-p200.dtb dtb-$(CONFIG_ARCH_MESON) += meson-gxbb-p201.dtb -dtb-$(CONFIG_ARCH_MESON) += meson-gxbb-vega-s95-pro.dtb dtb-$(CONFIG_ARCH_MESON) += meson-gxbb-vega-s95-meta.dtb +dtb-$(CONFIG_ARCH_MESON) += meson-gxbb-vega-s95-pro.dtb dtb-$(CONFIG_ARCH_MESON) += meson-gxbb-vega-s95-telos.dtb dtb-$(CONFIG_ARCH_MESON) += meson-gxbb-wetek-hub.dtb dtb-$(CONFIG_ARCH_MESON) += meson-gxbb-wetek-play2.dtb dtb-$(CONFIG_ARCH_MESON) += meson-gxl-s805x-libretech-ac.dtb -dtb-$(CONFIG_ARCH_MESON) += meson-gxl-s905x-hwacom-amazetv.dtb -dtb-$(CONFIG_ARCH_MESON) += meson-gxl-s905x-khadas-vim.dtb -dtb-$(CONFIG_ARCH_MESON) += meson-gxl-s905x-libretech-cc.dtb -dtb-$(CONFIG_ARCH_MESON) += meson-gxl-s905x-libretech-cc-v2.dtb -dtb-$(CONFIG_ARCH_MESON) += meson-gxl-s905x-nexbox-a95x.dtb -dtb-$(CONFIG_ARCH_MESON) += meson-gxl-s905x-p212.dtb +dtb-$(CONFIG_ARCH_MESON) += meson-gxl-s805x-p241.dtb +dtb-$(CONFIG_ARCH_MESON) += meson-gxl-s905d-libretech-pc.dtb dtb-$(CONFIG_ARCH_MESON) += meson-gxl-s905d-mecool-kii-pro.dtb dtb-$(CONFIG_ARCH_MESON) += meson-gxl-s905d-p230.dtb dtb-$(CONFIG_ARCH_MESON) += meson-gxl-s905d-p231.dtb dtb-$(CONFIG_ARCH_MESON) += meson-gxl-s905d-phicomm-n1.dtb dtb-$(CONFIG_ARCH_MESON) += meson-gxl-s905d-sml5442tw.dtb dtb-$(CONFIG_ARCH_MESON) += meson-gxl-s905d-vero4k-plus.dtb -dtb-$(CONFIG_ARCH_MESON) += meson-gxl-s805x-p241.dtb +dtb-$(CONFIG_ARCH_MESON) += meson-gxl-s905w-jethome-jethub-j80.dtb dtb-$(CONFIG_ARCH_MESON) += meson-gxl-s905w-p281.dtb dtb-$(CONFIG_ARCH_MESON) += meson-gxl-s905w-tx3-mini.dtb -dtb-$(CONFIG_ARCH_MESON) += meson-gxl-s905d-libretech-pc.dtb -dtb-$(CONFIG_ARCH_MESON) += meson-gxl-s905w-jethome-jethub-j80.dtb +dtb-$(CONFIG_ARCH_MESON) += meson-gxl-s905x-hwacom-amazetv.dtb +dtb-$(CONFIG_ARCH_MESON) += meson-gxl-s905x-khadas-vim.dtb +dtb-$(CONFIG_ARCH_MESON) += meson-gxl-s905x-libretech-cc-v2.dtb +dtb-$(CONFIG_ARCH_MESON) += meson-gxl-s905x-libretech-cc.dtb +dtb-$(CONFIG_ARCH_MESON) += meson-gxl-s905x-nexbox-a95x.dtb +dtb-$(CONFIG_ARCH_MESON) += meson-gxl-s905x-p212.dtb dtb-$(CONFIG_ARCH_MESON) += meson-gxm-khadas-vim2.dtb dtb-$(CONFIG_ARCH_MESON) += meson-gxm-mecool-kiii-pro.dtb dtb-$(CONFIG_ARCH_MESON) += meson-gxm-minix-neo-u9h.dtb @@ -52,15 +53,14 @@ dtb-$(CONFIG_ARCH_MESON) += meson-gxm-rbox-pro.dtb dtb-$(CONFIG_ARCH_MESON) += meson-gxm-s912-libretech-pc.dtb dtb-$(CONFIG_ARCH_MESON) += meson-gxm-vega-s96.dtb dtb-$(CONFIG_ARCH_MESON) += meson-gxm-wetek-core2.dtb -dtb-$(CONFIG_ARCH_MESON) += meson-sm1-a95xf3-air.dtb +dtb-$(CONFIG_ARCH_MESON) += meson-s4-s805x2-aq222.dtb dtb-$(CONFIG_ARCH_MESON) += meson-sm1-a95xf3-air-gbit.dtb +dtb-$(CONFIG_ARCH_MESON) += meson-sm1-a95xf3-air.dtb dtb-$(CONFIG_ARCH_MESON) += meson-sm1-bananapi-m5.dtb dtb-$(CONFIG_ARCH_MESON) += meson-sm1-h96-max.dtb dtb-$(CONFIG_ARCH_MESON) += meson-sm1-khadas-vim3l.dtb dtb-$(CONFIG_ARCH_MESON) += meson-sm1-odroid-c4.dtb dtb-$(CONFIG_ARCH_MESON) += meson-sm1-odroid-hc4.dtb dtb-$(CONFIG_ARCH_MESON) += meson-sm1-sei610.dtb -dtb-$(CONFIG_ARCH_MESON) += meson-sm1-x96-air.dtb dtb-$(CONFIG_ARCH_MESON) += meson-sm1-x96-air-gbit.dtb -dtb-$(CONFIG_ARCH_MESON) += meson-a1-ad401.dtb -dtb-$(CONFIG_ARCH_MESON) += meson-s4-s805x2-aq222.dtb +dtb-$(CONFIG_ARCH_MESON) += meson-sm1-x96-air.dtb diff --git a/arch/arm64/boot/dts/amlogic/meson-axg-jethome-jethub-j100.dts b/arch/arm64/boot/dts/amlogic/meson-axg-jethome-jethub-j100.dts index 561eec21b4de..8b0d586aa84e 100644 --- a/arch/arm64/boot/dts/amlogic/meson-axg-jethome-jethub-j100.dts +++ b/arch/arm64/boot/dts/amlogic/meson-axg-jethome-jethub-j100.dts @@ -18,7 +18,7 @@ model = "JetHome JetHub J100"; aliases { serial0 = &uart_AO; /* Console */ - serial1 = &uart_AO_B; /* External UART (Wireless Module) */ + serial2 = &uart_AO_B; /* External UART (Wireless Module) */ ethernet0 = ðmac; }; @@ -81,6 +81,15 @@ vddio_boot: regulator-vddio_boot { compatible = "regulator-fixed"; regulator-name = "VDDIO_BOOT"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + vin-supply = <&vddao_3v3>; + regulator-always-on; + }; + + vccq_1v8: regulator-vccq_1v8 { + compatible = "regulator-fixed"; + regulator-name = "VCCQ_1V8"; regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; vin-supply = <&vddao_3v3>; @@ -248,8 +257,7 @@ bus-width = <4>; cap-sd-highspeed; - sd-uhs-sdr104; - max-frequency = <200000000>; + max-frequency = <50000000>; non-removable; disable-wp; @@ -282,7 +290,7 @@ mmc-pwrseq = <&emmc_pwrseq>; vmmc-supply = <&vcc_3v3>; - vqmmc-supply = <&vddio_boot>; + vqmmc-supply = <&vccq_1v8>; }; /* UART Bluetooth */ diff --git a/arch/arm64/boot/dts/amlogic/meson-gx-libretech-pc.dtsi b/arch/arm64/boot/dts/amlogic/meson-gx-libretech-pc.dtsi index 2d7032f41e4b..bcdf55f48a83 100644 --- a/arch/arm64/boot/dts/amlogic/meson-gx-libretech-pc.dtsi +++ b/arch/arm64/boot/dts/amlogic/meson-gx-libretech-pc.dtsi @@ -416,7 +416,7 @@ pinctrl-names = "default"; status = "okay"; - gd25lq128: spi-flash@0 { + gd25lq128: flash@0 { compatible = "jedec,spi-nor"; #address-cells = <1>; #size-cells = <1>; diff --git a/arch/arm64/boot/dts/amlogic/meson-gxl-s805x-libretech-ac.dts b/arch/arm64/boot/dts/amlogic/meson-gxl-s805x-libretech-ac.dts index 2d769203f671..213a0705ebdc 100644 --- a/arch/arm64/boot/dts/amlogic/meson-gxl-s805x-libretech-ac.dts +++ b/arch/arm64/boot/dts/amlogic/meson-gxl-s805x-libretech-ac.dts @@ -298,7 +298,7 @@ pinctrl-0 = <&nor_pins>; pinctrl-names = "default"; - w25q32: spi-flash@0 { + w25q32: flash@0 { #address-cells = <1>; #size-cells = <1>; compatible = "jedec,spi-nor"; diff --git a/arch/arm64/boot/dts/amlogic/meson-gxl-s905w-jethome-jethub-j80.dts b/arch/arm64/boot/dts/amlogic/meson-gxl-s905w-jethome-jethub-j80.dts index 6eafb908695f..fcb304c5a40f 100644 --- a/arch/arm64/boot/dts/amlogic/meson-gxl-s905w-jethome-jethub-j80.dts +++ b/arch/arm64/boot/dts/amlogic/meson-gxl-s905w-jethome-jethub-j80.dts @@ -213,6 +213,12 @@ pinctrl-0 = <&uart_a_pins>, <&uart_a_cts_rts_pins>; pinctrl-names = "default"; uart-has-rtscts; + + bluetooth { + compatible = "realtek,rtl8822cs-bt"; + enable-gpios = <&gpio GPIOX_17 GPIO_ACTIVE_HIGH>; + host-wake-gpios = <&gpio GPIOX_18 GPIO_ACTIVE_HIGH>; + }; }; &uart_C { diff --git a/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-libretech-cc-v2.dts b/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-libretech-cc-v2.dts index 93d8f8aff70d..874f91c348ec 100644 --- a/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-libretech-cc-v2.dts +++ b/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-libretech-cc-v2.dts @@ -284,7 +284,7 @@ pinctrl-0 = <&nor_pins>; pinctrl-names = "default"; - nor_4u1: spi-flash@0 { + nor_4u1: flash@0 { #address-cells = <1>; #size-cells = <1>; compatible = "jedec,spi-nor"; diff --git a/arch/arm64/boot/dts/amlogic/meson-gxm-khadas-vim2.dts b/arch/arm64/boot/dts/amlogic/meson-gxm-khadas-vim2.dts index 86bdc0baf032..f43c45daf7eb 100644 --- a/arch/arm64/boot/dts/amlogic/meson-gxm-khadas-vim2.dts +++ b/arch/arm64/boot/dts/amlogic/meson-gxm-khadas-vim2.dts @@ -374,7 +374,7 @@ pinctrl-0 = <&nor_pins>; pinctrl-names = "default"; - w25q32: spi-flash@0 { + w25q32: flash@0 { #address-cells = <1>; #size-cells = <1>; compatible = "winbond,w25q16", "jedec,spi-nor"; diff --git a/arch/arm64/boot/dts/amlogic/meson-khadas-vim3.dtsi b/arch/arm64/boot/dts/amlogic/meson-khadas-vim3.dtsi index 3cf4ecb6d52e..c9705941e4ab 100644 --- a/arch/arm64/boot/dts/amlogic/meson-khadas-vim3.dtsi +++ b/arch/arm64/boot/dts/amlogic/meson-khadas-vim3.dtsi @@ -458,7 +458,7 @@ pinctrl-0 = <&nor_pins>; pinctrl-names = "default"; - w25q128: spi-flash@0 { + w25q128: flash@0 { #address-cells = <1>; #size-cells = <1>; compatible = "winbond,w25q128fw", "jedec,spi-nor"; diff --git a/arch/arm64/boot/dts/amlogic/meson-s4.dtsi b/arch/arm64/boot/dts/amlogic/meson-s4.dtsi index 480afa2cc61f..ff213618a598 100644 --- a/arch/arm64/boot/dts/amlogic/meson-s4.dtsi +++ b/arch/arm64/boot/dts/amlogic/meson-s4.dtsi @@ -5,6 +5,7 @@ #include <dt-bindings/interrupt-controller/irq.h> #include <dt-bindings/interrupt-controller/arm-gic.h> +#include <dt-bindings/gpio/gpio.h> / { cpus { @@ -60,6 +61,12 @@ #clock-cells = <0>; }; + pwrc: power-controller { + compatible = "amlogic,meson-s4-pwrc"; + #power-domain-cells = <1>; + status = "okay"; + }; + soc { compatible = "simple-bus"; #address-cells = <2>; @@ -85,6 +92,32 @@ #size-cells = <2>; ranges = <0x0 0x0 0x0 0xfe000000 0x0 0x480000>; + periphs_pinctrl: pinctrl@4000 { + compatible = "amlogic,meson-s4-periphs-pinctrl"; + #address-cells = <2>; + #size-cells = <2>; + ranges; + + gpio: bank@4000 { + reg = <0x0 0x4000 0x0 0x004c>, + <0x0 0x40c0 0x0 0x0220>; + reg-names = "mux", "gpio"; + gpio-controller; + #gpio-cells = <2>; + gpio-ranges = <&periphs_pinctrl 0 0 82>; + }; + }; + + gpio_intc: interrupt-controller@4080 { + compatible = "amlogic,meson-s4-gpio-intc", + "amlogic,meson-gpio-intc"; + reg = <0x0 0x4080 0x0 0x20>; + interrupt-controller; + #interrupt-cells = <2>; + amlogic,channel-interrupts = + <10 11 12 13 14 15 16 17 18 19 20 21>; + }; + uart_B: serial@7a000 { compatible = "amlogic,meson-s4-uart", "amlogic,meson-ao-uart"; diff --git a/arch/arm64/boot/dts/amlogic/meson-sm1-odroid-hc4.dts b/arch/arm64/boot/dts/amlogic/meson-sm1-odroid-hc4.dts index f3f953225bf5..e3486f60645a 100644 --- a/arch/arm64/boot/dts/amlogic/meson-sm1-odroid-hc4.dts +++ b/arch/arm64/boot/dts/amlogic/meson-sm1-odroid-hc4.dts @@ -121,7 +121,7 @@ pinctrl-0 = <&nor_pins>; pinctrl-names = "default"; - spi-flash@0 { + flash@0 { #address-cells = <1>; #size-cells = <1>; compatible = "jedec,spi-nor"; diff --git a/arch/arm64/boot/dts/arm/Makefile b/arch/arm64/boot/dts/arm/Makefile index 4382b73baef5..d908e96d7ddc 100644 --- a/arch/arm64/boot/dts/arm/Makefile +++ b/arch/arm64/boot/dts/arm/Makefile @@ -6,3 +6,4 @@ dtb-$(CONFIG_ARCH_VEXPRESS) += juno.dtb juno-r1.dtb juno-r2.dtb juno-scmi.dtb ju dtb-$(CONFIG_ARCH_VEXPRESS) += rtsm_ve-aemv8a.dtb dtb-$(CONFIG_ARCH_VEXPRESS) += vexpress-v2f-1xv7-ca53x2.dtb dtb-$(CONFIG_ARCH_VEXPRESS) += fvp-base-revc.dtb +dtb-$(CONFIG_ARCH_VEXPRESS) += corstone1000-fvp.dtb corstone1000-mps3.dtb diff --git a/arch/arm64/boot/dts/arm/corstone1000-fvp.dts b/arch/arm64/boot/dts/arm/corstone1000-fvp.dts new file mode 100644 index 000000000000..26b0f1b3cea6 --- /dev/null +++ b/arch/arm64/boot/dts/arm/corstone1000-fvp.dts @@ -0,0 +1,51 @@ +// SPDX-License-Identifier: GPL-2.0 or MIT +/* + * Copyright (c) 2022, Arm Limited. All rights reserved. + * Copyright (c) 2022, Linaro Limited. All rights reserved. + * + */ + +/dts-v1/; + +#include "corstone1000.dtsi" + +/ { + model = "ARM Corstone1000 FVP (Fixed Virtual Platform)"; + compatible = "arm,corstone1000-fvp"; + + smsc: ethernet@4010000 { + compatible = "smsc,lan91c111"; + reg = <0x40100000 0x10000>; + phy-mode = "mii"; + interrupts = <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>; + reg-io-width = <2>; + }; + + vmmc_v3_3d: fixed_v3_3d { + compatible = "regulator-fixed"; + regulator-name = "vmmc_supply"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + + sdmmc0: mmc@40300000 { + compatible = "arm,pl18x", "arm,primecell"; + reg = <0x40300000 0x1000>; + interrupts = <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>; + max-frequency = <12000000>; + vmmc-supply = <&vmmc_v3_3d>; + clocks = <&smbclk>, <&refclk100mhz>; + clock-names = "smclk", "apb_pclk"; + }; + + sdmmc1: mmc@50000000 { + compatible = "arm,pl18x", "arm,primecell"; + reg = <0x50000000 0x10000>; + interrupts = <GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH>; + max-frequency = <12000000>; + vmmc-supply = <&vmmc_v3_3d>; + clocks = <&smbclk>, <&refclk100mhz>; + clock-names = "smclk", "apb_pclk"; + }; +}; diff --git a/arch/arm64/boot/dts/arm/corstone1000-mps3.dts b/arch/arm64/boot/dts/arm/corstone1000-mps3.dts new file mode 100644 index 000000000000..e3146747c2d9 --- /dev/null +++ b/arch/arm64/boot/dts/arm/corstone1000-mps3.dts @@ -0,0 +1,32 @@ +// SPDX-License-Identifier: GPL-2.0 or MIT +/* + * Copyright (c) 2022, Arm Limited. All rights reserved. + * Copyright (c) 2022, Linaro Limited. All rights reserved. + * + */ + +/dts-v1/; + +#include "corstone1000.dtsi" + +/ { + model = "ARM Corstone1000 FPGA MPS3 board"; + compatible = "arm,corstone1000-mps3"; + + smsc: ethernet@4010000 { + compatible = "smsc,lan9220", "smsc,lan9115"; + reg = <0x40100000 0x10000>; + phy-mode = "mii"; + interrupts = <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>; + reg-io-width = <2>; + smsc,irq-push-pull; + }; + + usb_host: usb@40200000 { + compatible = "nxp,usb-isp1763"; + reg = <0x40200000 0x100000>; + interrupts = <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>; + bus-width = <16>; + dr_mode = "host"; + }; +}; diff --git a/arch/arm64/boot/dts/arm/corstone1000.dtsi b/arch/arm64/boot/dts/arm/corstone1000.dtsi new file mode 100644 index 000000000000..4e46826f883a --- /dev/null +++ b/arch/arm64/boot/dts/arm/corstone1000.dtsi @@ -0,0 +1,164 @@ +// SPDX-License-Identifier: GPL-2.0 or MIT +/* + * Copyright (c) 2022, Arm Limited. All rights reserved. + * Copyright (c) 2022, Linaro Limited. All rights reserved. + * + */ + +#include <dt-bindings/interrupt-controller/arm-gic.h> + +/ { + interrupt-parent = <&gic>; + #address-cells = <1>; + #size-cells = <1>; + + aliases { + serial0 = &uart0; + serial1 = &uart1; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + cpu: cpu@0 { + device_type = "cpu"; + compatible = "arm,cortex-a35"; + reg = <0>; + next-level-cache = <&L2_0>; + }; + }; + + memory@88200000 { + device_type = "memory"; + reg = <0x88200000 0x77e00000>; + }; + + gic: interrupt-controller@1c000000 { + compatible = "arm,gic-400"; + #interrupt-cells = <3>; + #address-cells = <0>; + interrupt-controller; + reg = <0x1c010000 0x1000>, + <0x1c02f000 0x2000>, + <0x1c04f000 0x1000>, + <0x1c06f000 0x2000>; + interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(1) | + IRQ_TYPE_LEVEL_LOW)>; + }; + + L2_0: l2-cache0 { + compatible = "cache"; + cache-level = <2>; + cache-size = <0x80000>; + cache-line-size = <64>; + cache-sets = <1024>; + }; + + refclk100mhz: refclk100mhz { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <100000000>; + clock-output-names = "apb_pclk"; + }; + + smbclk: refclk24mhzx2 { + /* Reference 24MHz clock x 2 */ + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <48000000>; + clock-output-names = "smclk"; + }; + + timer { + compatible = "arm,armv8-timer"; + interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(1) | + IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(1) | + IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(1) | + IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(1) | + IRQ_TYPE_LEVEL_LOW)>; + }; + + uartclk: uartclk { + /* UART clock - 50MHz */ + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <50000000>; + clock-output-names = "uartclk"; + }; + + psci { + compatible = "arm,psci-1.0", "arm,psci-0.2"; + method = "smc"; + }; + + soc { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + interrupt-parent = <&gic>; + ranges; + + timer@1a220000 { + compatible = "arm,armv7-timer-mem"; + reg = <0x1a220000 0x1000>; + #address-cells = <1>; + #size-cells = <1>; + clock-frequency = <50000000>; + ranges; + + frame@1a230000 { + frame-number = <0>; + interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>; + reg = <0x1a230000 0x1000>; + }; + }; + + uart0: serial@1a510000 { + compatible = "arm,pl011", "arm,primecell"; + reg = <0x1a510000 0x1000>; + interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&uartclk>, <&refclk100mhz>; + clock-names = "uartclk", "apb_pclk"; + }; + + uart1: serial@1a520000 { + compatible = "arm,pl011", "arm,primecell"; + reg = <0x1a520000 0x1000>; + interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&uartclk>, <&refclk100mhz>; + clock-names = "uartclk", "apb_pclk"; + }; + + mhu_hse1: mailbox@1b820000 { + compatible = "arm,mhuv2-tx", "arm,primecell"; + reg = <0x1b820000 0x1000>; + clocks = <&refclk100mhz>; + clock-names = "apb_pclk"; + interrupts = <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>; + #mbox-cells = <2>; + arm,mhuv2-protocols = <0 0>; + secure-status = "okay"; /* secure-world-only */ + status = "disabled"; + }; + + mhu_seh1: mailbox@1b830000 { + compatible = "arm,mhuv2-rx", "arm,primecell"; + reg = <0x1b830000 0x1000>; + clocks = <&refclk100mhz>; + clock-names = "apb_pclk"; + interrupts = <GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH>; + #mbox-cells = <2>; + arm,mhuv2-protocols = <0 0>; + secure-status = "okay"; /* secure-world-only */ + status = "disabled"; + }; + }; +}; diff --git a/arch/arm64/boot/dts/arm/foundation-v8.dtsi b/arch/arm64/boot/dts/arm/foundation-v8.dtsi index fbf13f7c2baf..83e3e7e3984f 100644 --- a/arch/arm64/boot/dts/arm/foundation-v8.dtsi +++ b/arch/arm64/boot/dts/arm/foundation-v8.dtsi @@ -220,7 +220,7 @@ clock-names = "uartclk", "apb_pclk"; }; - virtio-block@130000 { + virtio@130000 { compatible = "virtio,mmio"; reg = <0x130000 0x200>; interrupts = <42>; diff --git a/arch/arm64/boot/dts/arm/fvp-base-revc.dts b/arch/arm64/boot/dts/arm/fvp-base-revc.dts index 269b649934b5..a496e39e6204 100644 --- a/arch/arm64/boot/dts/arm/fvp-base-revc.dts +++ b/arch/arm64/boot/dts/arm/fvp-base-revc.dts @@ -241,6 +241,7 @@ <0 0 41 &gic 0 0 GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>, <0 0 42 &gic 0 0 GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>, <0 0 43 &gic 0 0 GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>, - <0 0 44 &gic 0 0 GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>; + <0 0 44 &gic 0 0 GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>, + <0 0 46 &gic 0 0 GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH>; }; }; diff --git a/arch/arm64/boot/dts/arm/juno-base.dtsi b/arch/arm64/boot/dts/arm/juno-base.dtsi index 446c8f476eec..065381c1cbf5 100644 --- a/arch/arm64/boot/dts/arm/juno-base.dtsi +++ b/arch/arm64/boot/dts/arm/juno-base.dtsi @@ -117,7 +117,7 @@ * The actual size is just 4K though 64K is reserved. Access to the * unmapped reserved region results in a DECERR response. */ - etf@20010000 { /* etf0 */ + etf_sys0: etf@20010000 { /* etf0 */ compatible = "arm,coresight-tmc", "arm,primecell"; reg = <0 0x20010000 0 0x1000>; @@ -141,7 +141,7 @@ }; }; - tpiu@20030000 { + tpiu_sys: tpiu@20030000 { compatible = "arm,coresight-tpiu", "arm,primecell"; reg = <0 0x20030000 0 0x1000>; @@ -194,7 +194,7 @@ }; }; - etr@20070000 { + etr_sys: etr@20070000 { compatible = "arm,coresight-tmc", "arm,primecell"; reg = <0 0x20070000 0 0x1000>; iommus = <&smmu_etr 0>; @@ -212,7 +212,7 @@ }; }; - stm@20100000 { + stm_sys: stm@20100000 { compatible = "arm,coresight-stm", "arm,primecell"; reg = <0 0x20100000 0 0x1000>, <0 0x28000000 0 0x1000000>; @@ -289,6 +289,18 @@ }; }; + cti0: cti@22020000 { + compatible = "arm,coresight-cti-v8-arch", "arm,coresight-cti", + "arm,primecell"; + reg = <0 0x22020000 0 0x1000>; + + clocks = <&soc_smc50mhz>; + clock-names = "apb_pclk"; + power-domains = <&scpi_devpd 0>; + + arm,cs-dev-assoc = <&etm0>; + }; + funnel@220c0000 { /* cluster0 funnel */ compatible = "arm,coresight-dynamic-funnel", "arm,primecell"; reg = <0 0x220c0000 0 0x1000>; @@ -349,6 +361,18 @@ }; }; + cti1: cti@22120000 { + compatible = "arm,coresight-cti-v8-arch", "arm,coresight-cti", + "arm,primecell"; + reg = <0 0x22120000 0 0x1000>; + + clocks = <&soc_smc50mhz>; + clock-names = "apb_pclk"; + power-domains = <&scpi_devpd 0>; + + arm,cs-dev-assoc = <&etm1>; + }; + cpu_debug2: cpu-debug@23010000 { compatible = "arm,coresight-cpu-debug", "arm,primecell"; reg = <0x0 0x23010000 0x0 0x1000>; @@ -374,6 +398,18 @@ }; }; + cti2: cti@23020000 { + compatible = "arm,coresight-cti-v8-arch", "arm,coresight-cti", + "arm,primecell"; + reg = <0 0x23020000 0 0x1000>; + + clocks = <&soc_smc50mhz>; + clock-names = "apb_pclk"; + power-domains = <&scpi_devpd 0>; + + arm,cs-dev-assoc = <&etm2>; + }; + funnel@230c0000 { /* cluster1 funnel */ compatible = "arm,coresight-dynamic-funnel", "arm,primecell"; reg = <0 0x230c0000 0 0x1000>; @@ -446,6 +482,18 @@ }; }; + cti3: cti@23120000 { + compatible = "arm,coresight-cti-v8-arch", "arm,coresight-cti", + "arm,primecell"; + reg = <0 0x23120000 0 0x1000>; + + clocks = <&soc_smc50mhz>; + clock-names = "apb_pclk"; + power-domains = <&scpi_devpd 0>; + + arm,cs-dev-assoc = <&etm3>; + }; + cpu_debug4: cpu-debug@23210000 { compatible = "arm,coresight-cpu-debug", "arm,primecell"; reg = <0x0 0x23210000 0x0 0x1000>; @@ -471,6 +519,18 @@ }; }; + cti4: cti@23220000 { + compatible = "arm,coresight-cti-v8-arch", "arm,coresight-cti", + "arm,primecell"; + reg = <0 0x23220000 0 0x1000>; + + clocks = <&soc_smc50mhz>; + clock-names = "apb_pclk"; + power-domains = <&scpi_devpd 0>; + + arm,cs-dev-assoc = <&etm4>; + }; + cpu_debug5: cpu-debug@23310000 { compatible = "arm,coresight-cpu-debug", "arm,primecell"; reg = <0x0 0x23310000 0x0 0x1000>; @@ -496,6 +556,100 @@ }; }; + cti5: cti@23320000 { + compatible = "arm,coresight-cti-v8-arch", "arm,coresight-cti", + "arm,primecell"; + reg = <0 0x23320000 0 0x1000>; + + clocks = <&soc_smc50mhz>; + clock-names = "apb_pclk"; + power-domains = <&scpi_devpd 0>; + + arm,cs-dev-assoc = <&etm5>; + }; + + cti_sys0: cti@20020000 { /* sys_cti_0 */ + compatible = "arm,coresight-cti", "arm,primecell"; + reg = <0 0x20020000 0 0x1000>; + + clocks = <&soc_smc50mhz>; + clock-names = "apb_pclk"; + power-domains = <&scpi_devpd 0>; + + #address-cells = <1>; + #size-cells = <0>; + + trig-conns@0 { + reg = <0>; + arm,trig-in-sigs=<2 3>; + arm,trig-in-types=<SNK_FULL SNK_ACQCOMP>; + arm,trig-out-sigs=<0 1>; + arm,trig-out-types=<SNK_FLUSHIN SNK_TRIGIN>; + arm,cs-dev-assoc = <&etr_sys>; + }; + + trig-conns@1 { + reg = <1>; + arm,trig-in-sigs=<0 1>; + arm,trig-in-types=<SNK_FULL SNK_ACQCOMP>; + arm,trig-out-sigs=<7 6>; + arm,trig-out-types=<SNK_FLUSHIN SNK_TRIGIN>; + arm,cs-dev-assoc = <&etf_sys0>; + }; + + trig-conns@2 { + reg = <2>; + arm,trig-in-sigs=<4 5 6 7>; + arm,trig-in-types=<STM_TOUT_SPTE STM_TOUT_SW + STM_TOUT_HETE STM_ASYNCOUT>; + arm,trig-out-sigs=<4 5>; + arm,trig-out-types=<STM_HWEVENT STM_HWEVENT>; + arm,cs-dev-assoc = <&stm_sys>; + }; + + trig-conns@3 { + reg = <3>; + arm,trig-out-sigs=<2 3>; + arm,trig-out-types=<SNK_FLUSHIN SNK_TRIGIN>; + arm,cs-dev-assoc = <&tpiu_sys>; + }; + }; + + cti_sys1: cti@20110000 { /* sys_cti_1 */ + compatible = "arm,coresight-cti", "arm,primecell"; + reg = <0 0x20110000 0 0x1000>; + + clocks = <&soc_smc50mhz>; + clock-names = "apb_pclk"; + power-domains = <&scpi_devpd 0>; + + #address-cells = <1>; + #size-cells = <0>; + + trig-conns@0 { + reg = <0>; + arm,trig-in-sigs=<0>; + arm,trig-in-types=<GEN_INTREQ>; + arm,trig-out-sigs=<0>; + arm,trig-out-types=<GEN_HALTREQ>; + arm,trig-conn-name = "sys_profiler"; + }; + + trig-conns@1 { + reg = <1>; + arm,trig-out-sigs=<2 3>; + arm,trig-out-types=<GEN_HALTREQ GEN_RESTARTREQ>; + arm,trig-conn-name = "watchdog"; + }; + + trig-conns@2 { + reg = <2>; + arm,trig-out-sigs=<1 6>; + arm,trig-out-types=<GEN_HALTREQ GEN_RESTARTREQ>; + arm,trig-conn-name = "g_counter"; + }; + }; + gpu: gpu@2d000000 { compatible = "arm,juno-mali", "arm,mali-t624"; reg = <0 0x2d000000 0 0x10000>; @@ -675,8 +829,6 @@ compatible = "arm,pl330", "arm,primecell"; reg = <0x0 0x7ff00000 0 0x1000>; #dma-cells = <1>; - #dma-channels = <8>; - #dma-requests = <32>; interrupts = <GIC_SPI 88 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 90 IRQ_TYPE_LEVEL_HIGH>, diff --git a/arch/arm64/boot/dts/arm/juno-cs-r1r2.dtsi b/arch/arm64/boot/dts/arm/juno-cs-r1r2.dtsi index eda3d9e18af6..2e43f4531308 100644 --- a/arch/arm64/boot/dts/arm/juno-cs-r1r2.dtsi +++ b/arch/arm64/boot/dts/arm/juno-cs-r1r2.dtsi @@ -23,7 +23,7 @@ }; }; - etf@20140000 { /* etf1 */ + etf_sys1: etf@20140000 { /* etf1 */ compatible = "arm,coresight-tmc", "arm,primecell"; reg = <0 0x20140000 0 0x1000>; @@ -82,4 +82,39 @@ }; }; + + cti_sys2: cti@20160000 { /* sys_cti_2 */ + compatible = "arm,coresight-cti", "arm,primecell"; + reg = <0 0x20160000 0 0x1000>; + + clocks = <&soc_smc50mhz>; + clock-names = "apb_pclk"; + power-domains = <&scpi_devpd 0>; + + #address-cells = <1>; + #size-cells = <0>; + + trig-conns@0 { + reg = <0>; + arm,trig-in-sigs=<0 1>; + arm,trig-in-types=<SNK_FULL SNK_ACQCOMP>; + arm,trig-out-sigs=<0 1>; + arm,trig-out-types=<SNK_FLUSHIN SNK_TRIGIN>; + arm,cs-dev-assoc = <&etf_sys1>; + }; + + trig-conns@1 { + reg = <1>; + arm,trig-in-sigs=<2 3 4>; + arm,trig-in-types=<ELA_DBGREQ ELA_TSTART ELA_TSTOP>; + arm,trig-conn-name = "ela_clus_0"; + }; + + trig-conns@2 { + reg = <2>; + arm,trig-in-sigs=<5 6 7>; + arm,trig-in-types=<ELA_DBGREQ ELA_TSTART ELA_TSTOP>; + arm,trig-conn-name = "ela_clus_1"; + }; + }; }; diff --git a/arch/arm64/boot/dts/arm/juno-r1-scmi.dts b/arch/arm64/boot/dts/arm/juno-r1-scmi.dts index 190a0fba4ad6..dd9ea69f086f 100644 --- a/arch/arm64/boot/dts/arm/juno-r1-scmi.dts +++ b/arch/arm64/boot/dts/arm/juno-r1-scmi.dts @@ -7,14 +7,18 @@ }; etf@20140000 { - power-domains = <&scmi_devpd 0>; + power-domains = <&scmi_devpd 8>; }; funnel@20150000 { - power-domains = <&scmi_devpd 0>; + power-domains = <&scmi_devpd 8>; }; }; +&cti_sys2 { + power-domains = <&scmi_devpd 8>; +}; + &A57_0 { clocks = <&scmi_dvfs 0>; }; diff --git a/arch/arm64/boot/dts/arm/juno-r1.dts b/arch/arm64/boot/dts/arm/juno-r1.dts index 0e24e29eb9b1..f099fb611d4e 100644 --- a/arch/arm64/boot/dts/arm/juno-r1.dts +++ b/arch/arm64/boot/dts/arm/juno-r1.dts @@ -9,6 +9,7 @@ /dts-v1/; #include <dt-bindings/interrupt-controller/arm-gic.h> +#include <dt-bindings/arm/coresight-cti-dt.h> #include "juno-base.dtsi" #include "juno-cs-r1r2.dtsi" @@ -313,3 +314,27 @@ &cpu_debug5 { cpu = <&A53_3>; }; + +&cti0 { + cpu = <&A57_0>; +}; + +&cti1 { + cpu = <&A57_1>; +}; + +&cti2 { + cpu = <&A53_0>; +}; + +&cti3 { + cpu = <&A53_1>; +}; + +&cti4 { + cpu = <&A53_2>; +}; + +&cti5 { + cpu = <&A53_3>; +}; diff --git a/arch/arm64/boot/dts/arm/juno-r2-scmi.dts b/arch/arm64/boot/dts/arm/juno-r2-scmi.dts index dbf13770084f..de2cbac1d1c3 100644 --- a/arch/arm64/boot/dts/arm/juno-r2-scmi.dts +++ b/arch/arm64/boot/dts/arm/juno-r2-scmi.dts @@ -7,14 +7,18 @@ }; etf@20140000 { - power-domains = <&scmi_devpd 0>; + power-domains = <&scmi_devpd 8>; }; funnel@20150000 { - power-domains = <&scmi_devpd 0>; + power-domains = <&scmi_devpd 8>; }; }; +&cti_sys2 { + power-domains = <&scmi_devpd 8>; +}; + &A72_0 { clocks = <&scmi_dvfs 0>; }; diff --git a/arch/arm64/boot/dts/arm/juno-r2.dts b/arch/arm64/boot/dts/arm/juno-r2.dts index e609420ce3e4..709389582ae3 100644 --- a/arch/arm64/boot/dts/arm/juno-r2.dts +++ b/arch/arm64/boot/dts/arm/juno-r2.dts @@ -9,6 +9,7 @@ /dts-v1/; #include <dt-bindings/interrupt-controller/arm-gic.h> +#include <dt-bindings/arm/coresight-cti-dt.h> #include "juno-base.dtsi" #include "juno-cs-r1r2.dtsi" @@ -319,3 +320,27 @@ &cpu_debug5 { cpu = <&A53_3>; }; + +&cti0 { + cpu = <&A72_0>; +}; + +&cti1 { + cpu = <&A72_1>; +}; + +&cti2 { + cpu = <&A53_0>; +}; + +&cti3 { + cpu = <&A53_1>; +}; + +&cti4 { + cpu = <&A53_2>; +}; + +&cti5 { + cpu = <&A53_3>; +}; diff --git a/arch/arm64/boot/dts/arm/juno-scmi.dtsi b/arch/arm64/boot/dts/arm/juno-scmi.dtsi index d72dcff9bf06..4135d62e44a2 100644 --- a/arch/arm64/boot/dts/arm/juno-scmi.dtsi +++ b/arch/arm64/boot/dts/arm/juno-scmi.dtsi @@ -154,6 +154,31 @@ power-domains = <&scmi_devpd 8>; }; +&cti0 { + power-domains = <&scmi_devpd 8>; +}; +&cti1 { + power-domains = <&scmi_devpd 8>; +}; +&cti2 { + power-domains = <&scmi_devpd 8>; +}; +&cti3 { + power-domains = <&scmi_devpd 8>; +}; +&cti4 { + power-domains = <&scmi_devpd 8>; +}; +&cti5 { + power-domains = <&scmi_devpd 8>; +}; +&cti_sys0 { + power-domains = <&scmi_devpd 8>; +}; +&cti_sys1 { + power-domains = <&scmi_devpd 8>; +}; + &gpu { clocks = <&scmi_dvfs 2>; power-domains = <&scmi_devpd 9>; diff --git a/arch/arm64/boot/dts/arm/juno.dts b/arch/arm64/boot/dts/arm/juno.dts index f00cffbd032c..dbc22e70b62c 100644 --- a/arch/arm64/boot/dts/arm/juno.dts +++ b/arch/arm64/boot/dts/arm/juno.dts @@ -9,6 +9,7 @@ /dts-v1/; #include <dt-bindings/interrupt-controller/arm-gic.h> +#include <dt-bindings/arm/coresight-cti-dt.h> #include "juno-base.dtsi" / { @@ -295,3 +296,27 @@ &cpu_debug5 { cpu = <&A53_3>; }; + +&cti0 { + cpu = <&A57_0>; +}; + +&cti1 { + cpu = <&A57_1>; +}; + +&cti2 { + cpu = <&A53_0>; +}; + +&cti3 { + cpu = <&A53_1>; +}; + +&cti4 { + cpu = <&A53_2>; +}; + +&cti5 { + cpu = <&A53_3>; +}; diff --git a/arch/arm64/boot/dts/arm/rtsm_ve-motherboard-rs2.dtsi b/arch/arm64/boot/dts/arm/rtsm_ve-motherboard-rs2.dtsi index 33182d9e5826..ec2d5280a30b 100644 --- a/arch/arm64/boot/dts/arm/rtsm_ve-motherboard-rs2.dtsi +++ b/arch/arm64/boot/dts/arm/rtsm_ve-motherboard-rs2.dtsi @@ -10,17 +10,24 @@ arm,v2m-memory-map = "rs2"; iofpga-bus@300000000 { - virtio-p9@140000 { + virtio@140000 { compatible = "virtio,mmio"; reg = <0x140000 0x200>; interrupts = <43>; }; - virtio-net@150000 { + virtio@150000 { compatible = "virtio,mmio"; reg = <0x150000 0x200>; interrupts = <44>; }; + + virtio@200000 { + compatible = "virtio,mmio"; + reg = <0x200000 0x200>; + interrupts = <46>; + status = "disabled"; + }; }; }; }; diff --git a/arch/arm64/boot/dts/arm/rtsm_ve-motherboard.dtsi b/arch/arm64/boot/dts/arm/rtsm_ve-motherboard.dtsi index 5f6cab668aa0..ba8beef3fe99 100644 --- a/arch/arm64/boot/dts/arm/rtsm_ve-motherboard.dtsi +++ b/arch/arm64/boot/dts/arm/rtsm_ve-motherboard.dtsi @@ -110,7 +110,7 @@ compatible = "simple-bus"; #address-cells = <1>; #size-cells = <1>; - ranges = <0 3 0 0x200000>; + ranges = <0 3 0 0x210000>; v2m_sysreg: sysreg@10000 { compatible = "arm,vexpress-sysreg"; @@ -222,7 +222,7 @@ clock-names = "timclken1", "timclken2", "apb_pclk"; }; - virtio-block@130000 { + virtio@130000 { compatible = "virtio,mmio"; reg = <0x130000 0x200>; interrupts = <42>; diff --git a/arch/arm64/boot/dts/broadcom/northstar2/ns2-svk.dts b/arch/arm64/boot/dts/broadcom/northstar2/ns2-svk.dts index 12a4b1c03390..e34172e3117e 100644 --- a/arch/arm64/boot/dts/broadcom/northstar2/ns2-svk.dts +++ b/arch/arm64/boot/dts/broadcom/northstar2/ns2-svk.dts @@ -203,7 +203,7 @@ &qspi { bspi-sel = <0>; - flash: m25p80@0 { + flash: flash@0 { #address-cells = <1>; #size-cells = <1>; compatible = "m25p80"; diff --git a/arch/arm64/boot/dts/broadcom/northstar2/ns2-xmc.dts b/arch/arm64/boot/dts/broadcom/northstar2/ns2-xmc.dts index f00c21e0767e..7bf26f3e36bf 100644 --- a/arch/arm64/boot/dts/broadcom/northstar2/ns2-xmc.dts +++ b/arch/arm64/boot/dts/broadcom/northstar2/ns2-xmc.dts @@ -146,7 +146,7 @@ }; &qspi { - flash: m25p80@0 { + flash: flash@0 { #address-cells = <1>; #size-cells = <1>; compatible = "m25p80"; diff --git a/arch/arm64/boot/dts/broadcom/northstar2/ns2.dtsi b/arch/arm64/boot/dts/broadcom/northstar2/ns2.dtsi index f59fa3979a04..fda97c47f4e9 100644 --- a/arch/arm64/boot/dts/broadcom/northstar2/ns2.dtsi +++ b/arch/arm64/boot/dts/broadcom/northstar2/ns2.dtsi @@ -289,8 +289,6 @@ <GIC_SPI 215 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 216 IRQ_TYPE_LEVEL_HIGH>; #dma-cells = <1>; - #dma-channels = <8>; - #dma-requests = <32>; clocks = <&iprocslow>; clock-names = "apb_pclk"; }; diff --git a/arch/arm64/boot/dts/broadcom/stingray/bcm958742k.dts b/arch/arm64/boot/dts/broadcom/stingray/bcm958742k.dts index 77efa28c4dd5..dfac910a45d6 100644 --- a/arch/arm64/boot/dts/broadcom/stingray/bcm958742k.dts +++ b/arch/arm64/boot/dts/broadcom/stingray/bcm958742k.dts @@ -61,7 +61,7 @@ cs-gpios = <&gpio_hsls 34 0>; status = "okay"; - spi-flash@0 { + flash@0 { compatible = "jedec,spi-nor"; reg = <0>; spi-max-frequency = <20000000>; @@ -76,7 +76,7 @@ cs-gpios = <&gpio_hsls 96 0>; status = "okay"; - spi-flash@0 { + flash@0 { compatible = "jedec,spi-nor"; reg = <0>; spi-max-frequency = <20000000>; diff --git a/arch/arm64/boot/dts/broadcom/stingray/stingray.dtsi b/arch/arm64/boot/dts/broadcom/stingray/stingray.dtsi index 7f1b8efd0883..09d4aa8ae1d6 100644 --- a/arch/arm64/boot/dts/broadcom/stingray/stingray.dtsi +++ b/arch/arm64/boot/dts/broadcom/stingray/stingray.dtsi @@ -556,8 +556,6 @@ <GIC_SPI 200 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 201 IRQ_TYPE_LEVEL_HIGH>; #dma-cells = <1>; - #dma-channels = <8>; - #dma-requests = <32>; clocks = <&hsls_div2_clk>; clock-names = "apb_pclk"; iommus = <&smmu 0x6000 0x0000>; diff --git a/arch/arm64/boot/dts/exynos/exynos5433.dtsi b/arch/arm64/boot/dts/exynos/exynos5433.dtsi index 661567d2dd7a..75b548e495a0 100644 --- a/arch/arm64/boot/dts/exynos/exynos5433.dtsi +++ b/arch/arm64/boot/dts/exynos/exynos5433.dtsi @@ -806,7 +806,8 @@ }; timer@101c0000 { - compatible = "samsung,exynos4210-mct"; + compatible = "samsung,exynos5433-mct", + "samsung,exynos4210-mct"; reg = <0x101c0000 0x800>; interrupts = <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>, @@ -1865,8 +1866,6 @@ clocks = <&cmu_fsys CLK_PDMA0>; clock-names = "apb_pclk"; #dma-cells = <1>; - #dma-channels = <8>; - #dma-requests = <32>; }; pdma1: dma-controller@15600000 { @@ -1876,8 +1875,6 @@ clocks = <&cmu_fsys CLK_PDMA1>; clock-names = "apb_pclk"; #dma-cells = <1>; - #dma-channels = <8>; - #dma-requests = <32>; }; audio-subsystem@11400000 { @@ -1897,8 +1894,6 @@ clocks = <&cmu_aud CLK_ACLK_DMAC>; clock-names = "apb_pclk"; #dma-cells = <1>; - #dma-channels = <8>; - #dma-requests = <32>; power-domains = <&pd_aud>; }; diff --git a/arch/arm64/boot/dts/exynos/exynos7.dtsi b/arch/arm64/boot/dts/exynos/exynos7.dtsi index e38bb02a2152..1cd771c90b47 100644 --- a/arch/arm64/boot/dts/exynos/exynos7.dtsi +++ b/arch/arm64/boot/dts/exynos/exynos7.dtsi @@ -149,8 +149,6 @@ clocks = <&clock_fsys0 ACLK_PDMA0>; clock-names = "apb_pclk"; #dma-cells = <1>; - #dma-channels = <8>; - #dma-requests = <32>; }; pdma1: dma-controller@10eb0000 { @@ -160,8 +158,6 @@ clocks = <&clock_fsys0 ACLK_PDMA1>; clock-names = "apb_pclk"; #dma-cells = <1>; - #dma-channels = <8>; - #dma-requests = <32>; }; clock_topc: clock-controller@10570000 { diff --git a/arch/arm64/boot/dts/exynos/exynos850-e850-96.dts b/arch/arm64/boot/dts/exynos/exynos850-e850-96.dts index 7b5a61d22cc5..f52a55f644f7 100644 --- a/arch/arm64/boot/dts/exynos/exynos850-e850-96.dts +++ b/arch/arm64/boot/dts/exynos/exynos850-e850-96.dts @@ -20,6 +20,11 @@ model = "WinLink E850-96 board"; compatible = "winlink,e850-96", "samsung,exynos850"; + aliases { + mmc0 = &mmc_0; + serial0 = &serial_0; + }; + chosen { stdout-path = &serial_0; }; diff --git a/arch/arm64/boot/dts/exynos/exynos850.dtsi b/arch/arm64/boot/dts/exynos/exynos850.dtsi index d1700e96fee2..9076afd4bb3e 100644 --- a/arch/arm64/boot/dts/exynos/exynos850.dtsi +++ b/arch/arm64/boot/dts/exynos/exynos850.dtsi @@ -29,22 +29,6 @@ pinctrl3 = &pinctrl_hsi; pinctrl4 = &pinctrl_core; pinctrl5 = &pinctrl_peri; - mmc0 = &mmc_0; - serial0 = &serial_0; - serial1 = &serial_1; - serial2 = &serial_2; - i2c0 = &i2c_0; - i2c1 = &i2c_1; - i2c2 = &i2c_2; - i2c3 = &i2c_3; - i2c4 = &i2c_4; - i2c5 = &i2c_5; - i2c6 = &i2c_6; - i2c7 = &hsi2c_0; - i2c8 = &hsi2c_1; - i2c9 = &hsi2c_2; - i2c10 = &hsi2c_3; - i2c11 = &hsi2c_4; }; arm-pmu { @@ -181,7 +165,8 @@ }; timer@10040000 { - compatible = "samsung,exynos4210-mct"; + compatible = "samsung,exynos850-mct", + "samsung,exynos4210-mct"; reg = <0x10040000 0x800>; interrupts = <GIC_SPI 203 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 204 IRQ_TYPE_LEVEL_HIGH>, diff --git a/arch/arm64/boot/dts/exynos/exynosautov9-sadk.dts b/arch/arm64/boot/dts/exynos/exynosautov9-sadk.dts index 57518cb5e8c4..17e568853eb6 100644 --- a/arch/arm64/boot/dts/exynos/exynosautov9-sadk.dts +++ b/arch/arm64/boot/dts/exynos/exynosautov9-sadk.dts @@ -58,3 +58,7 @@ &usi_0 { status = "okay"; }; + +&xtcxo { + clock-frequency = <26000000>; +}; diff --git a/arch/arm64/boot/dts/exynos/exynosautov9.dtsi b/arch/arm64/boot/dts/exynos/exynosautov9.dtsi index 807d500d6022..0ce46ec5cdc3 100644 --- a/arch/arm64/boot/dts/exynos/exynosautov9.dtsi +++ b/arch/arm64/boot/dts/exynos/exynosautov9.dtsi @@ -6,6 +6,7 @@ * */ +#include <dt-bindings/clock/samsung,exynosautov9.h> #include <dt-bindings/interrupt-controller/arm-gic.h> #include <dt-bindings/soc/samsung,exynos-usi.h> @@ -153,30 +154,8 @@ xtcxo: clock { compatible = "fixed-clock"; #clock-cells = <0>; - clock-frequency = <26000000>; clock-output-names = "oscclk"; }; - - /* - * Keep the stub clock for serial driver, until proper clock - * driver is implemented. - */ - uart_clock: uart-clock { - compatible = "fixed-clock"; - #clock-cells = <0>; - clock-frequency = <133250000>; - clock-output-names = "uart"; - }; - - /* - * Keep the stub clock for ufs driver, until proper clock - * driver is implemented. - */ - ufs_core_clock: ufs-core-clock { - compatible = "fixed-clock"; - #clock-cells = <0>; - clock-frequency = <166562500>; - }; }; soc: soc@0 { @@ -190,6 +169,89 @@ reg = <0x10000000 0x24>; }; + cmu_peris: clock-controller@10020000 { + compatible = "samsung,exynosautov9-cmu-peris"; + reg = <0x10020000 0x8000>; + #clock-cells = <1>; + + clocks = <&xtcxo>, + <&cmu_top DOUT_CLKCMU_PERIS_BUS>; + clock-names = "oscclk", + "dout_clkcmu_peris_bus"; + }; + + cmu_peric0: clock-controller@10200000 { + compatible = "samsung,exynosautov9-cmu-peric0"; + reg = <0x10200000 0x8000>; + #clock-cells = <1>; + + clocks = <&xtcxo>, + <&cmu_top DOUT_CLKCMU_PERIC0_BUS>, + <&cmu_top DOUT_CLKCMU_PERIC0_IP>; + clock-names = "oscclk", + "dout_clkcmu_peric0_bus", + "dout_clkcmu_peric0_ip"; + }; + + cmu_peric1: clock-controller@10800000 { + compatible = "samsung,exynosautov9-cmu-peric1"; + reg = <0x10800000 0x8000>; + #clock-cells = <1>; + + clocks = <&xtcxo>, + <&cmu_top DOUT_CLKCMU_PERIC1_BUS>, + <&cmu_top DOUT_CLKCMU_PERIC1_IP>; + clock-names = "oscclk", + "dout_clkcmu_peric1_bus", + "dout_clkcmu_peric1_ip"; + }; + + cmu_fsys2: clock-controller@17c00000 { + compatible = "samsung,exynosautov9-cmu-fsys2"; + reg = <0x17c00000 0x8000>; + #clock-cells = <1>; + + clocks = <&xtcxo>, + <&cmu_top DOUT_CLKCMU_FSYS2_BUS>, + <&cmu_top DOUT_CLKCMU_FSYS2_UFS_EMBD>, + <&cmu_top DOUT_CLKCMU_FSYS2_ETHERNET>; + clock-names = "oscclk", + "dout_clkcmu_fsys2_bus", + "dout_fsys2_clkcmu_ufs_embd", + "dout_fsys2_clkcmu_ethernet"; + }; + + cmu_core: clock-controller@1b030000 { + compatible = "samsung,exynosautov9-cmu-core"; + reg = <0x1b030000 0x8000>; + #clock-cells = <1>; + + clocks = <&xtcxo>, + <&cmu_top DOUT_CLKCMU_CORE_BUS>; + clock-names = "oscclk", + "dout_clkcmu_core_bus"; + }; + + cmu_busmc: clock-controller@1b200000 { + compatible = "samsung,exynosautov9-cmu-busmc"; + reg = <0x1b200000 0x8000>; + #clock-cells = <1>; + + clocks = <&xtcxo>, + <&cmu_top DOUT_CLKCMU_BUSMC_BUS>; + clock-names = "oscclk", + "dout_clkcmu_busmc_bus"; + }; + + cmu_top: clock-controller@1b240000 { + compatible = "samsung,exynosautov9-cmu-top"; + reg = <0x1b240000 0x8000>; + #clock-cells = <1>; + + clocks = <&xtcxo>; + clock-names = "oscclk"; + }; + gic: interrupt-controller@10101000 { compatible = "arm,gic-400"; #interrupt-cells = <3>; @@ -271,7 +333,8 @@ #address-cells = <1>; #size-cells = <1>; ranges; - clocks = <&uart_clock>, <&uart_clock>; + clocks = <&cmu_peric0 CLK_GOUT_PERIC0_PCLK_0>, + <&cmu_peric0 CLK_GOUT_PERIC0_IPCLK_0>; clock-names = "pclk", "ipclk"; status = "disabled"; @@ -282,7 +345,8 @@ interrupts = <GIC_SPI 345 IRQ_TYPE_LEVEL_HIGH>; pinctrl-names = "default"; pinctrl-0 = <&uart0_bus_dual>; - clocks = <&uart_clock>, <&uart_clock>; + clocks = <&cmu_peric0 CLK_GOUT_PERIC0_PCLK_0>, + <&cmu_peric0 CLK_GOUT_PERIC0_IPCLK_0>; clock-names = "uart", "clk_uart_baud0"; status = "disabled"; }; @@ -308,8 +372,8 @@ <0x17dc0000 0x2200>; /* 3: UFS protector */ reg-names = "hci", "vs_hci", "unipro", "ufsp"; interrupts = <GIC_SPI 227 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&ufs_core_clock>, - <&ufs_core_clock>; + clocks = <&cmu_fsys2 CLK_GOUT_FSYS2_UFS_EMBD0_ACLK>, + <&cmu_fsys2 CLK_GOUT_FSYS2_UFS_EMBD0_UNIPRO>; clock-names = "core_clk", "sclk_unipro_main"; freq-table-hz = <0 0>, <0 0>; pinctrl-names = "default"; diff --git a/arch/arm64/boot/dts/freescale/Makefile b/arch/arm64/boot/dts/freescale/Makefile index 7f51b537df40..238a83e5b8c6 100644 --- a/arch/arm64/boot/dts/freescale/Makefile +++ b/arch/arm64/boot/dts/freescale/Makefile @@ -49,12 +49,14 @@ dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1028a-qds-899b.dtb dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1028a-qds-9999.dtb dtb-$(CONFIG_ARCH_MXC) += imx8mm-beacon-kit.dtb +dtb-$(CONFIG_ARCH_MXC) += imx8mm-data-modul-edm-sbc.dtb dtb-$(CONFIG_ARCH_MXC) += imx8mm-ddr4-evk.dtb dtb-$(CONFIG_ARCH_MXC) += imx8mm-emcon-avari.dtb dtb-$(CONFIG_ARCH_MXC) += imx8mm-evk.dtb dtb-$(CONFIG_ARCH_MXC) += imx8mm-icore-mx8mm-ctouch2.dtb dtb-$(CONFIG_ARCH_MXC) += imx8mm-icore-mx8mm-edimm2.2.dtb dtb-$(CONFIG_ARCH_MXC) += imx8mm-kontron-n801x-s.dtb +dtb-$(CONFIG_ARCH_MXC) += imx8mm-mx8menlo.dtb dtb-$(CONFIG_ARCH_MXC) += imx8mm-nitrogen-r2.dtb dtb-$(CONFIG_ARCH_MXC) += imx8mm-tqma8mqml-mba8mx.dtb dtb-$(CONFIG_ARCH_MXC) += imx8mm-var-som-symphony.dtb @@ -72,12 +74,19 @@ dtb-$(CONFIG_ARCH_MXC) += imx8mn-beacon-kit.dtb dtb-$(CONFIG_ARCH_MXC) += imx8mn-bsh-smm-s2.dtb dtb-$(CONFIG_ARCH_MXC) += imx8mn-bsh-smm-s2pro.dtb dtb-$(CONFIG_ARCH_MXC) += imx8mn-evk.dtb +dtb-$(CONFIG_ARCH_MXC) += imx8mn-ddr3l-evk.dtb dtb-$(CONFIG_ARCH_MXC) += imx8mn-ddr4-evk.dtb dtb-$(CONFIG_ARCH_MXC) += imx8mn-tqma8mqnl-mba8mx.dtb dtb-$(CONFIG_ARCH_MXC) += imx8mn-var-som-symphony.dtb dtb-$(CONFIG_ARCH_MXC) += imx8mn-venice-gw7902.dtb dtb-$(CONFIG_ARCH_MXC) += imx8mp-evk.dtb +dtb-$(CONFIG_ARCH_MXC) += imx8mp-icore-mx8mp-edimm2.2.dtb dtb-$(CONFIG_ARCH_MXC) += imx8mp-phyboard-pollux-rdk.dtb +dtb-$(CONFIG_ARCH_MXC) += imx8mp-venice-gw74xx.dtb +dtb-$(CONFIG_ARCH_MXC) += imx8mp-verdin-nonwifi-dahlia.dtb +dtb-$(CONFIG_ARCH_MXC) += imx8mp-verdin-nonwifi-dev.dtb +dtb-$(CONFIG_ARCH_MXC) += imx8mp-verdin-wifi-dahlia.dtb +dtb-$(CONFIG_ARCH_MXC) += imx8mp-verdin-wifi-dev.dtb dtb-$(CONFIG_ARCH_MXC) += imx8mq-evk.dtb dtb-$(CONFIG_ARCH_MXC) += imx8mq-hummingboard-pulse.dtb dtb-$(CONFIG_ARCH_MXC) += imx8mq-kontron-pitx-imx8m.dtb diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1028a-kontron-sl28.dts b/arch/arm64/boot/dts/freescale/fsl-ls1028a-kontron-sl28.dts index c03f4e183389..4ab17b984b03 100644 --- a/arch/arm64/boot/dts/freescale/fsl-ls1028a-kontron-sl28.dts +++ b/arch/arm64/boot/dts/freescale/fsl-ls1028a-kontron-sl28.dts @@ -311,10 +311,19 @@ status = "okay"; }; +&mscc_felix_port4 { + dsa-tag-protocol = "ocelot-8021q"; +}; + +&mscc_felix_port5 { + dsa-tag-protocol = "ocelot-8021q"; +}; + &usb0 { status = "okay"; }; &usb1 { + dr_mode = "host"; status = "okay"; }; diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1028a-qds.dts b/arch/arm64/boot/dts/freescale/fsl-ls1028a-qds.dts index 19d3952dbffe..5baf060acf93 100644 --- a/arch/arm64/boot/dts/freescale/fsl-ls1028a-qds.dts +++ b/arch/arm64/boot/dts/freescale/fsl-ls1028a-qds.dts @@ -382,9 +382,11 @@ }; &usb0 { + dr_mode = "host"; status = "okay"; }; &usb1 { + dr_mode = "host"; status = "okay"; }; diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1028a-rdb.dts b/arch/arm64/boot/dts/freescale/fsl-ls1028a-rdb.dts index 68c31cb8eead..e0cd1516d05b 100644 --- a/arch/arm64/boot/dts/freescale/fsl-ls1028a-rdb.dts +++ b/arch/arm64/boot/dts/freescale/fsl-ls1028a-rdb.dts @@ -299,10 +299,10 @@ }; &usb0 { + dr_mode = "host"; status = "okay"; }; &usb1 { - dr_mode = "otg"; status = "okay"; }; diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi index 088271d49139..92465f777603 100644 --- a/arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi +++ b/arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi @@ -599,7 +599,6 @@ compatible = "fsl,ls1028a-dwc3", "snps,dwc3"; reg = <0x0 0x3100000 0x0 0x10000>; interrupts = <GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>; - dr_mode = "host"; snps,dis_rxdet_inp3_quirk; snps,quirk-frame-length-adjustment = <0x20>; snps,incr-burst-type-adjustment = <1>, <4>, <8>, <16>; @@ -610,7 +609,6 @@ compatible = "fsl,ls1028a-dwc3", "snps,dwc3"; reg = <0x0 0x3110000 0x0 0x10000>; interrupts = <GIC_SPI 81 IRQ_TYPE_LEVEL_HIGH>; - dr_mode = "host"; snps,dis_rxdet_inp3_quirk; snps,quirk-frame-length-adjustment = <0x20>; snps,incr-burst-type-adjustment = <1>, <4>, <8>, <16>; diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi index 35d1939e690b..21200cbf7161 100644 --- a/arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi +++ b/arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi @@ -335,7 +335,7 @@ <9 0 &gic GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH>, <10 0 &gic GIC_SPI 150 IRQ_TYPE_LEVEL_HIGH>, <11 0 &gic GIC_SPI 151 IRQ_TYPE_LEVEL_HIGH>; - interrupt-map-mask = <0xffffffff 0x0>; + interrupt-map-mask = <0xf 0x0>; }; }; @@ -389,8 +389,8 @@ big-endian; }; - ifc: ifc@1530000 { - compatible = "fsl,ifc", "simple-bus"; + ifc: memory-controller@1530000 { + compatible = "fsl,ifc"; reg = <0x0 0x1530000 0x0 0x10000>; interrupts = <0 43 0x4>; }; diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1046a.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls1046a.dtsi index 4e7bd04d9798..0085e83adf65 100644 --- a/arch/arm64/boot/dts/freescale/fsl-ls1046a.dtsi +++ b/arch/arm64/boot/dts/freescale/fsl-ls1046a.dtsi @@ -280,8 +280,8 @@ big-endian; }; - ifc: ifc@1530000 { - compatible = "fsl,ifc", "simple-bus"; + ifc: memory-controller@1530000 { + compatible = "fsl,ifc"; reg = <0x0 0x1530000 0x0 0x10000>; interrupts = <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>; status = "disabled"; @@ -341,7 +341,7 @@ <9 0 &gic GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH>, <10 0 &gic GIC_SPI 150 IRQ_TYPE_LEVEL_HIGH>, <11 0 &gic GIC_SPI 151 IRQ_TYPE_LEVEL_HIGH>; - interrupt-map-mask = <0xffffffff 0x0>; + interrupt-map-mask = <0xf 0x0>; }; }; diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1088a.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls1088a.dtsi index 18e529118476..f476b7d8b056 100644 --- a/arch/arm64/boot/dts/freescale/fsl-ls1088a.dtsi +++ b/arch/arm64/boot/dts/freescale/fsl-ls1088a.dtsi @@ -265,7 +265,7 @@ <9 0 &gic GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>, <10 0 &gic GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>, <11 0 &gic GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>; - interrupt-map-mask = <0xffffffff 0x0>; + interrupt-map-mask = <0xf 0x0>; }; }; @@ -396,8 +396,8 @@ #interrupt-cells = <2>; }; - ifc: ifc@2240000 { - compatible = "fsl,ifc", "simple-bus"; + ifc: memory-controller@2240000 { + compatible = "fsl,ifc"; reg = <0x0 0x2240000 0x0 0x20000>; interrupts = <0 21 IRQ_TYPE_LEVEL_HIGH>; little-endian; diff --git a/arch/arm64/boot/dts/freescale/fsl-ls208xa-qds.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls208xa-qds.dtsi index 10d2fe091965..6fab73d484b6 100644 --- a/arch/arm64/boot/dts/freescale/fsl-ls208xa-qds.dtsi +++ b/arch/arm64/boot/dts/freescale/fsl-ls208xa-qds.dtsi @@ -104,21 +104,21 @@ &dspi { status = "okay"; - dflash0: n25q128a@0 { + dflash0: flash@0 { #address-cells = <1>; #size-cells = <1>; compatible = "st,m25p80"; spi-max-frequency = <3000000>; reg = <0>; }; - dflash1: sst25wf040b@1 { + dflash1: flash@1 { #address-cells = <1>; #size-cells = <1>; compatible = "st,m25p80"; spi-max-frequency = <3000000>; reg = <1>; }; - dflash2: en25s64@2 { + dflash2: flash@2 { #address-cells = <1>; #size-cells = <1>; compatible = "st,m25p80"; @@ -129,7 +129,7 @@ &qspi { status = "okay"; - flash0: s25fl256s1@0 { + flash0: flash@0 { #address-cells = <1>; #size-cells = <1>; compatible = "st,m25p80"; @@ -138,7 +138,7 @@ spi-tx-bus-width = <4>; reg = <0>; }; - flash2: s25fl256s1@2 { + flash2: flash@2 { #address-cells = <1>; #size-cells = <1>; compatible = "st,m25p80"; diff --git a/arch/arm64/boot/dts/freescale/fsl-ls208xa-rdb.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls208xa-rdb.dtsi index 4b71c4fcb35f..f8135c5c252d 100644 --- a/arch/arm64/boot/dts/freescale/fsl-ls208xa-rdb.dtsi +++ b/arch/arm64/boot/dts/freescale/fsl-ls208xa-rdb.dtsi @@ -100,7 +100,7 @@ &dspi { status = "okay"; - dflash0: n25q512a@0 { + dflash0: flash@0 { #address-cells = <1>; #size-cells = <1>; compatible = "st,m25p80"; diff --git a/arch/arm64/boot/dts/freescale/fsl-ls208xa.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls208xa.dtsi index 1282b61da8a5..4ba1e0499dfd 100644 --- a/arch/arm64/boot/dts/freescale/fsl-ls208xa.dtsi +++ b/arch/arm64/boot/dts/freescale/fsl-ls208xa.dtsi @@ -305,7 +305,7 @@ <9 0 &gic GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>, <10 0 &gic GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>, <11 0 &gic GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>; - interrupt-map-mask = <0xffffffff 0x0>; + interrupt-map-mask = <0xf 0x0>; }; }; @@ -1036,8 +1036,8 @@ QORIQ_CLK_PLL_DIV(4)>; }; - ifc: ifc@2240000 { - compatible = "fsl,ifc", "simple-bus"; + ifc: memory-controller@2240000 { + compatible = "fsl,ifc"; reg = <0x0 0x2240000 0x0 0x20000>; interrupts = <0 21 0x4>; /* Level high type */ little-endian; diff --git a/arch/arm64/boot/dts/freescale/fsl-lx2160a.dtsi b/arch/arm64/boot/dts/freescale/fsl-lx2160a.dtsi index c5daa15b020d..47ea854720ce 100644 --- a/arch/arm64/boot/dts/freescale/fsl-lx2160a.dtsi +++ b/arch/arm64/boot/dts/freescale/fsl-lx2160a.dtsi @@ -698,7 +698,7 @@ <9 0 &gic GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>, <10 0 &gic GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>, <11 0 &gic GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>; - interrupt-map-mask = <0xffffffff 0x0>; + interrupt-map-mask = <0xf 0x0>; }; }; @@ -909,7 +909,7 @@ QORIQ_CLK_PLL_DIV(8)>, <&clockgen QORIQ_CLK_SYSCLK 0>; clock-names = "ipg", "per"; - fsl,clk-source = <0>; + fsl,clk-source = /bits/ 8 <0>; status = "disabled"; }; @@ -921,7 +921,7 @@ QORIQ_CLK_PLL_DIV(8)>, <&clockgen QORIQ_CLK_SYSCLK 0>; clock-names = "ipg", "per"; - fsl,clk-source = <0>; + fsl,clk-source = /bits/ 8 <0>; status = "disabled"; }; diff --git a/arch/arm64/boot/dts/freescale/imx8-ss-vpu.dtsi b/arch/arm64/boot/dts/freescale/imx8-ss-vpu.dtsi new file mode 100644 index 000000000000..c6540768bdb9 --- /dev/null +++ b/arch/arm64/boot/dts/freescale/imx8-ss-vpu.dtsi @@ -0,0 +1,74 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * Copyright 2021 NXP + * Dong Aisheng <aisheng.dong@nxp.com> + */ + +vpu: vpu@2c000000 { + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x2c000000 0x0 0x2c000000 0x2000000>; + reg = <0 0x2c000000 0 0x1000000>; + power-domains = <&pd IMX_SC_R_VPU>; + status = "disabled"; + + mu_m0: mailbox@2d000000 { + compatible = "fsl,imx6sx-mu"; + reg = <0x2d000000 0x20000>; + interrupts = <GIC_SPI 469 IRQ_TYPE_LEVEL_HIGH>; + #mbox-cells = <2>; + power-domains = <&pd IMX_SC_R_VPU_MU_0>; + status = "disabled"; + }; + + mu1_m0: mailbox@2d020000 { + compatible = "fsl,imx6sx-mu"; + reg = <0x2d020000 0x20000>; + interrupts = <GIC_SPI 470 IRQ_TYPE_LEVEL_HIGH>; + #mbox-cells = <2>; + power-domains = <&pd IMX_SC_R_VPU_MU_1>; + status = "disabled"; + }; + + mu2_m0: mailbox@2d040000 { + compatible = "fsl,imx6sx-mu"; + reg = <0x2d040000 0x20000>; + interrupts = <GIC_SPI 474 IRQ_TYPE_LEVEL_HIGH>; + #mbox-cells = <2>; + power-domains = <&pd IMX_SC_R_VPU_MU_2>; + status = "disabled"; + }; + + vpu_core0: vpu-core@2d080000 { + reg = <0x2d080000 0x10000>; + compatible = "nxp,imx8q-vpu-decoder"; + power-domains = <&pd IMX_SC_R_VPU_DEC_0>; + mbox-names = "tx0", "tx1", "rx"; + mboxes = <&mu_m0 0 0>, + <&mu_m0 0 1>, + <&mu_m0 1 0>; + status = "disabled"; + }; + + vpu_core1: vpu-core@2d090000 { + reg = <0x2d090000 0x10000>; + compatible = "nxp,imx8q-vpu-encoder"; + power-domains = <&pd IMX_SC_R_VPU_ENC_0>; + mbox-names = "tx0", "tx1", "rx"; + mboxes = <&mu1_m0 0 0>, + <&mu1_m0 0 1>, + <&mu1_m0 1 0>; + status = "disabled"; + }; + + vpu_core2: vpu-core@2d0a0000 { + reg = <0x2d0a0000 0x10000>; + compatible = "nxp,imx8q-vpu-encoder"; + power-domains = <&pd IMX_SC_R_VPU_ENC_1>; + mbox-names = "tx0", "tx1", "rx"; + mboxes = <&mu2_m0 0 0>, + <&mu2_m0 0 1>, + <&mu2_m0 1 0>; + status = "disabled"; + }; +}; diff --git a/arch/arm64/boot/dts/freescale/imx8mm-beacon-baseboard.dtsi b/arch/arm64/boot/dts/freescale/imx8mm-beacon-baseboard.dtsi index ec3f2c177035..f338a886d811 100644 --- a/arch/arm64/boot/dts/freescale/imx8mm-beacon-baseboard.dtsi +++ b/arch/arm64/boot/dts/freescale/imx8mm-beacon-baseboard.dtsi @@ -278,6 +278,7 @@ pinctrl-0 = <&pinctrl_uart3>; assigned-clocks = <&clk IMX8MM_CLK_UART3>; assigned-clock-parents = <&clk IMX8MM_SYS_PLL1_80M>; + uart-has-rtscts; status = "okay"; }; @@ -386,6 +387,8 @@ fsl,pins = < MX8MM_IOMUXC_ECSPI1_SCLK_UART3_DCE_RX 0x40 MX8MM_IOMUXC_ECSPI1_MOSI_UART3_DCE_TX 0x40 + MX8MM_IOMUXC_ECSPI1_MISO_UART3_DCE_CTS_B 0x40 + MX8MM_IOMUXC_ECSPI1_SS0_UART3_DCE_RTS_B 0x40 >; }; diff --git a/arch/arm64/boot/dts/freescale/imx8mm-data-modul-edm-sbc.dts b/arch/arm64/boot/dts/freescale/imx8mm-data-modul-edm-sbc.dts new file mode 100644 index 000000000000..778bdbe228d3 --- /dev/null +++ b/arch/arm64/boot/dts/freescale/imx8mm-data-modul-edm-sbc.dts @@ -0,0 +1,997 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright 2022 Marek Vasut <marex@denx.de> + */ + +/dts-v1/; + +#include <dt-bindings/net/qca-ar803x.h> +#include <dt-bindings/phy/phy-imx8-pcie.h> +#include "imx8mm.dtsi" + +/ { + model = "Data Modul i.MX8M Mini eDM SBC"; + compatible = "dmo,imx8mm-data-modul-edm-sbc", "fsl,imx8mm"; + + aliases { + rtc0 = &rtc; + rtc1 = &snvs_rtc; + }; + + chosen { + stdout-path = &uart3; + }; + + memory@40000000 { + device_type = "memory"; + /* There are 1/2/4 GiB options, adjusted by bootloader. */ + reg = <0x0 0x40000000 0 0x40000000>; + }; + + backlight: backlight { + compatible = "pwm-backlight"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_panel_backlight>; + brightness-levels = <0 1 10 20 30 40 50 60 70 75 80 90 100>; + default-brightness-level = <7>; + enable-gpios = <&gpio3 0 GPIO_ACTIVE_HIGH>; + pwms = <&pwm1 0 5000000 0>; + /* Disabled by default, unless display board plugged in. */ + status = "disabled"; + }; + + clk_xtal25: clk-xtal25 { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <25000000>; + }; + + panel: panel { + backlight = <&backlight>; + power-supply = <®_panel_vcc>; + /* Disabled by default, unless display board plugged in. */ + status = "disabled"; + }; + + reg_panel_vcc: regulator-panel-vcc { + compatible = "regulator-fixed"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_panel_vcc_reg>; + regulator-name = "PANEL_VCC"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + gpio = <&gpio3 6 0>; + enable-active-high; + /* Disabled by default, unless display board plugged in. */ + status = "disabled"; + }; + + reg_usdhc2_vcc: regulator-usdhc2-vcc { + compatible = "regulator-fixed"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usdhc2_vcc_reg>; + regulator-name = "V_3V3_SD"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + gpio = <&gpio2 19 0>; + enable-active-high; + }; + + watchdog-gpio { + /* TPS3813 */ + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_watchdog_gpio>; + compatible = "linux,wdt-gpio"; + always-enabled; + gpios = <&gpio1 8 GPIO_ACTIVE_HIGH>; + hw_algo = "level"; + /* Reset triggers in 2..3 seconds */ + hw_margin_ms = <1500>; + /* Disabled by default */ + status = "disabled"; + }; +}; + +&A53_0 { + cpu-supply = <&buck2_reg>; +}; + +&A53_1 { + cpu-supply = <&buck2_reg>; +}; + +&A53_2 { + cpu-supply = <&buck2_reg>; +}; + +&A53_3 { + cpu-supply = <&buck2_reg>; +}; + +&ddrc { + operating-points-v2 = <&ddrc_opp_table>; + + ddrc_opp_table: opp-table { + compatible = "operating-points-v2"; + + opp-25M { + opp-hz = /bits/ 64 <25000000>; + }; + + opp-100M { + opp-hz = /bits/ 64 <100000000>; + }; + + opp-750M { + opp-hz = /bits/ 64 <750000000>; + }; + }; +}; + +&ecspi1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_ecspi1>; + cs-gpios = <&gpio5 9 GPIO_ACTIVE_LOW>; + status = "okay"; + + flash@0 { /* W25Q128FVSI */ + compatible = "jedec,spi-nor"; + m25p,fast-read; + spi-max-frequency = <50000000>; + reg = <0>; + }; +}; + +&ecspi2 { /* Feature connector SPI */ + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_ecspi2>; + cs-gpios = <&gpio5 13 GPIO_ACTIVE_LOW>; + /* Disabled by default, unless feature board plugged in. */ + status = "disabled"; +}; + +&ecspi3 { /* Display connector SPI */ + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_ecspi3>; + cs-gpios = <&gpio5 25 GPIO_ACTIVE_LOW>; + /* Disabled by default, unless display board plugged in. */ + status = "disabled"; +}; + +&fec1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_fec1>; + phy-mode = "rgmii-id"; + phy-handle = <&fec1_phy>; + phy-supply = <&buck4_reg>; + fsl,magic-packet; + status = "okay"; + + mdio { + #address-cells = <1>; + #size-cells = <0>; + + /* Atheros AR8031 PHY */ + fec1_phy: ethernet-phy@0 { + compatible = "ethernet-phy-ieee802.3-c22"; + reg = <0>; + /* + * Dedicated ENET_WOL# signal is unused, the PHY + * can wake the SoC up via INT signal as well. + */ + interrupts-extended = <&gpio1 15 IRQ_TYPE_LEVEL_LOW>; + reset-gpios = <&gpio1 1 GPIO_ACTIVE_LOW>; + reset-assert-us = <10000>; + reset-deassert-us = <10000>; + qca,clk-out-frequency = <125000000>; + qca,clk-out-strength = <AR803X_STRENGTH_FULL>; + qca,keep-pll-enabled; + vddio-supply = <&vddio>; + + vddio: vddio-regulator { + regulator-name = "VDDIO"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + vddh: vddh-regulator { + regulator-name = "VDDH"; + }; + }; + }; +}; + +&gpio1 { + gpio-line-names = + "", "ENET_RST#", "WDOG_B#", "PMIC_INT#", + "", "M2-B_PCIE_RST#", "M2-B_PCIE_WAKE#", "RTC_IRQ#", + "WDOG_KICK#", "M2-B_PCIE_CLKREQ#", + "USB1_OTG_ID_3V3", "ENET_WOL#", + "", "", "", "ENET_INT#", + "", "", "", "", "", "", "", "", + "", "", "", "", "", "", "", ""; +}; + +&gpio2 { + gpio-line-names = + "MEMCFG2", "MEMCFG1", "DSI_RESET_1V8#", "DSI_IRQ_1V8#", + "M2-B_FULL_CARD_PWROFF_1V8#", "EEPROM_WP_1V8#", + "PCIE_CLK_GEN_CLKPWRGD_PD_1V8#", "GRAPHICS_PRSNT_1V8#", + "MEMCFG0", "WDOG_EN", + "M2-B_W_DISABLE1_WWAN_1V8#", "M2-B_W_DISABLE2_GPS_1V8#", + "", "", "", "", + "", "", "", "SD2_RESET#", "", "", "", "", + "", "", "", "", "", "", "", ""; +}; + +&gpio3 { + gpio-line-names = + "BL_ENABLE_1V8", "PG_V_IN_VAR#", "", "", + "", "", "TFT_ENABLE_1V8", "GRAPHICS_GPIO0_1V8", + "CSI_PD_1V8", "CSI_RESET_1V8#", "", "", + "", "", "", "", + "", "", "", "M2-B_WAKE_WWAN_1V8#", + "M2-B_RESET_1V8#", "", "", "", + "", "", "", "", "", "", "", ""; +}; + +&gpio4 { + gpio-line-names = + "NC0", "NC1", "BOOTCFG0", "BOOTCFG1", + "BOOTCFG2", "BOOTCFG3", "BOOTCFG4", "BOOTCFG5", + "BOOTCFG6", "BOOTCFG7", "NC10", "NC11", + "BOOTCFG8", "BOOTCFG9", "BOOTCFG10", "BOOTCFG11", + "BOOTCFG12", "BOOTCFG13", "BOOTCFG14", "BOOTCFG15", + "NC20", "", "", "", + "", "CAN_INT#", "CAN_RST#", "GPIO4_IO27", + "DIS_USB_DN2", "", "", ""; +}; + +&gpio5 { + gpio-line-names = + "", "DIS_USB_DN1", "USBHUB_RESET#", "GPIO5_IO03", + "GPIO5_IO04", "", "", "", + "", "SPI1_CS#", "", "", + "", "SPI2_CS#", "I2C1_SCL_3V3", "I2C1_SDA_3V3", + "I2C2_SCL_3V3", "I2C2_SDA_3V3", "I2C3_SCL_3V3", "I2C3_SDA_3V3", + "I2C4_SCL_3V3", "I2C4_SDA_3V3", "", "", + "", "SPI3_CS#", "", "", "", "", "", ""; +}; + +&i2c1 { + /* IMX8MM ERRATA e7805 -- I2C is limited to 384 kHz due to SoC bug */ + clock-frequency = <100000>; + pinctrl-names = "default", "gpio"; + pinctrl-0 = <&pinctrl_i2c1>; + pinctrl-1 = <&pinctrl_i2c1_gpio>; + scl-gpios = <&gpio5 14 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; + sda-gpios = <&gpio5 15 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; + status = "okay"; + + pmic: pmic@4b { + compatible = "rohm,bd71847"; + reg = <0x4b>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pmic>; + interrupt-parent = <&gpio1>; + interrupts = <3 IRQ_TYPE_EDGE_FALLING>; + rohm,reset-snvs-powered; + + /* + * i.MX 8M Mini Data Sheet for Consumer Products + * 3.1.3 Operating ranges + * MIMX8MM4DVTLZAA + */ + regulators { + /* VDD_SOC */ + buck1_reg: BUCK1 { + regulator-name = "buck1"; + regulator-min-microvolt = <850000>; + regulator-max-microvolt = <850000>; + regulator-boot-on; + regulator-always-on; + regulator-ramp-delay = <1250>; + }; + + /* VDD_ARM */ + buck2_reg: BUCK2 { + regulator-name = "buck2"; + regulator-min-microvolt = <850000>; + regulator-max-microvolt = <1050000>; + regulator-boot-on; + regulator-always-on; + regulator-ramp-delay = <1250>; + rohm,dvs-run-voltage = <1000000>; + rohm,dvs-idle-voltage = <950000>; + }; + + /* VDD_DRAM, BUCK5 */ + buck3_reg: BUCK3 { + regulator-name = "buck3"; + /* 1.5 GHz DDR bus clock */ + regulator-min-microvolt = <900000>; + regulator-max-microvolt = <1000000>; + regulator-boot-on; + regulator-always-on; + }; + + /* 3V3_VDD, BUCK6 */ + buck4_reg: BUCK4 { + regulator-name = "buck4"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-boot-on; + regulator-always-on; + }; + + /* 1V8_VDD, BUCK7 */ + buck5_reg: BUCK5 { + regulator-name = "buck5"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-boot-on; + regulator-always-on; + }; + + /* 1V1_NVCC_DRAM, BUCK8 */ + buck6_reg: BUCK6 { + regulator-name = "buck6"; + regulator-min-microvolt = <1100000>; + regulator-max-microvolt = <1100000>; + regulator-boot-on; + regulator-always-on; + }; + + /* 1V8_NVCC_SNVS */ + ldo1_reg: LDO1 { + regulator-name = "ldo1"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-boot-on; + regulator-always-on; + }; + + /* 0V8_VDD_SNVS */ + ldo2_reg: LDO2 { + regulator-name = "ldo2"; + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <800000>; + regulator-boot-on; + regulator-always-on; + }; + + /* 1V8_VDDA */ + ldo3_reg: LDO3 { + regulator-name = "ldo3"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-boot-on; + regulator-always-on; + }; + + /* 0V9_VDD_PHY */ + ldo4_reg: LDO4 { + regulator-name = "ldo4"; + regulator-min-microvolt = <900000>; + regulator-max-microvolt = <900000>; + regulator-boot-on; + regulator-always-on; + }; + + /* 1V2_VDD_PHY */ + ldo6_reg: LDO6 { + regulator-name = "ldo6"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-boot-on; + regulator-always-on; + }; + }; + }; +}; + +&i2c2 { + /* IMX8MM ERRATA e7805 -- I2C is limited to 384 kHz due to SoC bug */ + clock-frequency = <100000>; + pinctrl-names = "default", "gpio"; + pinctrl-0 = <&pinctrl_i2c2>; + pinctrl-1 = <&pinctrl_i2c2_gpio>; + scl-gpios = <&gpio5 16 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; + sda-gpios = <&gpio5 17 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; + status = "okay"; + + usb-hub@2c { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usb_hub>; + compatible = "microchip,usb2514bi"; + reg = <0x2c>; + individual-port-switching; + reset-gpios = <&gpio5 2 GPIO_ACTIVE_LOW>; + self-powered; + }; + + eeprom: eeprom@50 { + compatible = "atmel,24c32"; + reg = <0x50>; + pagesize = <32>; + }; + + rtc: rtc@68 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_rtc>; + compatible = "st,m41t62"; + reg = <0x68>; + interrupts-extended = <&gpio1 7 IRQ_TYPE_LEVEL_LOW>; + }; + + pcieclk: clk@6a { + compatible = "renesas,9fgv0241"; + reg = <0x6a>; + clocks = <&clk_xtal25>; + #clock-cells = <1>; + }; +}; + +&i2c3 { /* Display connector I2C */ + /* IMX8MM ERRATA e7805 -- I2C is limited to 384 kHz due to SoC bug */ + clock-frequency = <320000>; + pinctrl-names = "default", "gpio"; + pinctrl-0 = <&pinctrl_i2c3>; + pinctrl-1 = <&pinctrl_i2c3_gpio>; + scl-gpios = <&gpio5 18 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; + sda-gpios = <&gpio5 19 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; + status = "okay"; +}; + +&i2c4 { /* Feature connector I2C */ + /* IMX8MM ERRATA e7805 -- I2C is limited to 384 kHz due to SoC bug */ + clock-frequency = <320000>; + pinctrl-names = "default", "gpio"; + pinctrl-0 = <&pinctrl_i2c4>; + pinctrl-1 = <&pinctrl_i2c4_gpio>; + scl-gpios = <&gpio5 20 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; + sda-gpios = <&gpio5 21 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; + status = "okay"; +}; + +&iomuxc { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_hog_feature>, <&pinctrl_hog_misc>, + <&pinctrl_hog_panel>, <&pinctrl_hog_sbc>, + <&pinctrl_panel_expansion>; + + pinctrl_ecspi1: ecspi1-grp { + fsl,pins = < + MX8MM_IOMUXC_ECSPI1_SCLK_ECSPI1_SCLK 0x44 + MX8MM_IOMUXC_ECSPI1_MOSI_ECSPI1_MOSI 0x44 + MX8MM_IOMUXC_ECSPI1_MISO_ECSPI1_MISO 0x44 + MX8MM_IOMUXC_ECSPI1_SS0_GPIO5_IO9 0x40 + >; + }; + + pinctrl_ecspi2: ecspi2-grp { + fsl,pins = < + MX8MM_IOMUXC_ECSPI2_SCLK_ECSPI2_SCLK 0x44 + MX8MM_IOMUXC_ECSPI2_MOSI_ECSPI2_MOSI 0x44 + MX8MM_IOMUXC_ECSPI2_MISO_ECSPI2_MISO 0x44 + MX8MM_IOMUXC_ECSPI2_SS0_GPIO5_IO13 0x40 + >; + }; + + pinctrl_ecspi3: ecspi3-grp { + fsl,pins = < + MX8MM_IOMUXC_UART1_RXD_ECSPI3_SCLK 0x44 + MX8MM_IOMUXC_UART1_TXD_ECSPI3_MOSI 0x44 + MX8MM_IOMUXC_UART2_RXD_ECSPI3_MISO 0x44 + MX8MM_IOMUXC_UART2_TXD_GPIO5_IO25 0x40 + >; + }; + + pinctrl_fec1: fec1-grp { + fsl,pins = < + MX8MM_IOMUXC_ENET_MDC_ENET1_MDC 0x3 + MX8MM_IOMUXC_ENET_MDIO_ENET1_MDIO 0x3 + MX8MM_IOMUXC_ENET_RD0_ENET1_RGMII_RD0 0x91 + MX8MM_IOMUXC_ENET_RD1_ENET1_RGMII_RD1 0x91 + MX8MM_IOMUXC_ENET_RD2_ENET1_RGMII_RD2 0x91 + MX8MM_IOMUXC_ENET_RD3_ENET1_RGMII_RD3 0x91 + MX8MM_IOMUXC_ENET_RXC_ENET1_RGMII_RXC 0x91 + MX8MM_IOMUXC_ENET_RX_CTL_ENET1_RGMII_RX_CTL 0x91 + MX8MM_IOMUXC_ENET_TD0_ENET1_RGMII_TD0 0x1f + MX8MM_IOMUXC_ENET_TD1_ENET1_RGMII_TD1 0x1f + MX8MM_IOMUXC_ENET_TD2_ENET1_RGMII_TD2 0x1f + MX8MM_IOMUXC_ENET_TD3_ENET1_RGMII_TD3 0x1f + MX8MM_IOMUXC_ENET_TXC_ENET1_RGMII_TXC 0x1f + MX8MM_IOMUXC_ENET_TX_CTL_ENET1_RGMII_TX_CTL 0x1f + /* ENET_RST# */ + MX8MM_IOMUXC_GPIO1_IO01_GPIO1_IO1 0x6 + /* ENET_WOL# */ + MX8MM_IOMUXC_GPIO1_IO11_GPIO1_IO11 0x40000090 + /* ENET_INT# */ + MX8MM_IOMUXC_GPIO1_IO15_GPIO1_IO15 0x40000090 + >; + }; + + pinctrl_hog_feature: hog-feature-grp { + fsl,pins = < + /* GPIO4_IO27 */ + MX8MM_IOMUXC_SAI2_MCLK_GPIO4_IO27 0x40000006 + /* GPIO5_IO03 */ + MX8MM_IOMUXC_SPDIF_TX_GPIO5_IO3 0x40000006 + /* GPIO5_IO04 */ + MX8MM_IOMUXC_SPDIF_RX_GPIO5_IO4 0x40000006 + + /* CAN_INT# */ + MX8MM_IOMUXC_SAI2_TXC_GPIO4_IO25 0x40000090 + /* CAN_RST# */ + MX8MM_IOMUXC_SAI2_TXD0_GPIO4_IO26 0x26 + >; + }; + + pinctrl_hog_panel: hog-panel-grp { + fsl,pins = < + /* GRAPHICS_GPIO0_1V8 */ + MX8MM_IOMUXC_NAND_DATA01_GPIO3_IO7 0x26 + >; + }; + + pinctrl_hog_misc: hog-misc-grp { + fsl,pins = < + /* PG_V_IN_VAR# */ + MX8MM_IOMUXC_NAND_CE0_B_GPIO3_IO1 0x40000000 + /* CSI_PD_1V8 */ + MX8MM_IOMUXC_NAND_DATA02_GPIO3_IO8 0x0 + /* CSI_RESET_1V8# */ + MX8MM_IOMUXC_NAND_DATA03_GPIO3_IO9 0x0 + + /* DIS_USB_DN1 */ + MX8MM_IOMUXC_SAI3_TXD_GPIO5_IO1 0x0 + /* DIS_USB_DN2 */ + MX8MM_IOMUXC_SAI3_RXFS_GPIO4_IO28 0x0 + + /* EEPROM_WP_1V8# */ + MX8MM_IOMUXC_SD1_DATA3_GPIO2_IO5 0x100 + /* PCIE_CLK_GEN_CLKPWRGD_PD_1V8# */ + MX8MM_IOMUXC_SD1_DATA4_GPIO2_IO6 0x0 + /* GRAPHICS_PRSNT_1V8# */ + MX8MM_IOMUXC_SD1_DATA5_GPIO2_IO7 0x40000000 + + /* CLK_CCM_CLKO1_3V3 */ + MX8MM_IOMUXC_GPIO1_IO14_CCMSRCGPCMIX_CLKO1 0x10 + >; + }; + + pinctrl_hog_sbc: hog-sbc-grp { + fsl,pins = < + /* MEMCFG[0..2] straps */ + MX8MM_IOMUXC_SD1_DATA6_GPIO2_IO8 0x40000140 + MX8MM_IOMUXC_SD1_CMD_GPIO2_IO1 0x40000140 + MX8MM_IOMUXC_SD1_CLK_GPIO2_IO0 0x40000140 + + /* BOOT_CFG[0..15] straps */ + MX8MM_IOMUXC_SAI1_RXD0_GPIO4_IO2 0x40000000 + MX8MM_IOMUXC_SAI1_RXD1_GPIO4_IO3 0x40000000 + MX8MM_IOMUXC_SAI1_RXD2_GPIO4_IO4 0x40000000 + MX8MM_IOMUXC_SAI1_RXD3_GPIO4_IO5 0x40000000 + MX8MM_IOMUXC_SAI1_RXD4_GPIO4_IO6 0x40000000 + MX8MM_IOMUXC_SAI1_RXD5_GPIO4_IO7 0x40000000 + MX8MM_IOMUXC_SAI1_RXD6_GPIO4_IO8 0x40000000 + MX8MM_IOMUXC_SAI1_RXD7_GPIO4_IO9 0x40000000 + MX8MM_IOMUXC_SAI1_TXD0_GPIO4_IO12 0x40000000 + MX8MM_IOMUXC_SAI1_TXD1_GPIO4_IO13 0x40000000 + MX8MM_IOMUXC_SAI1_TXD2_GPIO4_IO14 0x40000000 + MX8MM_IOMUXC_SAI1_TXD3_GPIO4_IO15 0x40000000 + MX8MM_IOMUXC_SAI1_TXD4_GPIO4_IO16 0x40000000 + MX8MM_IOMUXC_SAI1_TXD5_GPIO4_IO17 0x40000000 + MX8MM_IOMUXC_SAI1_TXD6_GPIO4_IO18 0x40000000 + MX8MM_IOMUXC_SAI1_TXD7_GPIO4_IO19 0x40000000 + + /* Not connected pins */ + MX8MM_IOMUXC_SAI1_MCLK_GPIO4_IO20 0x0 + MX8MM_IOMUXC_SAI1_TXFS_GPIO4_IO10 0x0 + MX8MM_IOMUXC_SAI1_TXC_GPIO4_IO11 0x0 + MX8MM_IOMUXC_SAI1_RXFS_GPIO4_IO0 0x0 + MX8MM_IOMUXC_SAI1_RXC_GPIO4_IO1 0x0 + >; + }; + + pinctrl_i2c1: i2c1-grp { + fsl,pins = < + MX8MM_IOMUXC_I2C1_SCL_I2C1_SCL 0x40000084 + MX8MM_IOMUXC_I2C1_SDA_I2C1_SDA 0x40000084 + >; + }; + + pinctrl_i2c1_gpio: i2c1-gpio-grp { + fsl,pins = < + MX8MM_IOMUXC_I2C1_SCL_GPIO5_IO14 0x84 + MX8MM_IOMUXC_I2C1_SDA_GPIO5_IO15 0x84 + >; + }; + + pinctrl_i2c2: i2c2-grp { + fsl,pins = < + MX8MM_IOMUXC_I2C2_SCL_I2C2_SCL 0x40000084 + MX8MM_IOMUXC_I2C2_SDA_I2C2_SDA 0x40000084 + >; + }; + + pinctrl_i2c2_gpio: i2c2-gpio-grp { + fsl,pins = < + MX8MM_IOMUXC_I2C2_SCL_GPIO5_IO16 0x84 + MX8MM_IOMUXC_I2C2_SDA_GPIO5_IO17 0x84 + >; + }; + + pinctrl_i2c3: i2c3-grp { + fsl,pins = < + MX8MM_IOMUXC_I2C3_SCL_I2C3_SCL 0x40000084 + MX8MM_IOMUXC_I2C3_SDA_I2C3_SDA 0x40000084 + >; + }; + + pinctrl_i2c3_gpio: i2c3-gpio-grp { + fsl,pins = < + MX8MM_IOMUXC_I2C3_SCL_GPIO5_IO18 0x84 + MX8MM_IOMUXC_I2C3_SDA_GPIO5_IO19 0x84 + >; + }; + + pinctrl_i2c4: i2c4-grp { + fsl,pins = < + MX8MM_IOMUXC_I2C4_SCL_I2C4_SCL 0x40000084 + MX8MM_IOMUXC_I2C4_SDA_I2C4_SDA 0x40000084 + >; + }; + + pinctrl_i2c4_gpio: i2c4-gpio-grp { + fsl,pins = < + MX8MM_IOMUXC_I2C4_SCL_GPIO5_IO20 0x84 + MX8MM_IOMUXC_I2C4_SDA_GPIO5_IO21 0x84 + >; + }; + + pinctrl_panel_backlight: panel-backlight-grp { + fsl,pins = < + /* BL_ENABLE_1V8 */ + MX8MM_IOMUXC_NAND_ALE_GPIO3_IO0 0x104 + >; + }; + + pinctrl_panel_expansion: panel-expansion-grp { + fsl,pins = < + /* DSI_RESET_1V8# */ + MX8MM_IOMUXC_SD1_DATA0_GPIO2_IO2 0x2 + /* DSI_IRQ_1V8# */ + MX8MM_IOMUXC_SD1_DATA1_GPIO2_IO3 0x40000090 + >; + }; + + pinctrl_panel_vcc_reg: panel-vcc-grp { + fsl,pins = < + /* TFT_ENABLE_1V8 */ + MX8MM_IOMUXC_NAND_DATA00_GPIO3_IO6 0x104 + >; + }; + + pinctrl_panel_pwm: panel-pwm-grp { + fsl,pins = < + /* BL_PWM_3V3 */ + MX8MM_IOMUXC_SPDIF_EXT_CLK_PWM1_OUT 0x12 + >; + }; + + pinctrl_pcie0: pcie-grp { + fsl,pins = < + /* M2-B_RESET_1V8# */ + MX8MM_IOMUXC_SAI5_RXC_GPIO3_IO20 0x102 + /* M2-B_PCIE_RST# */ + MX8MM_IOMUXC_GPIO1_IO05_GPIO1_IO5 0x2 + /* M2-B_FULL_CARD_PWROFF_1V8# */ + MX8MM_IOMUXC_SD1_DATA2_GPIO2_IO4 0x102 + /* M2-B_W_DISABLE1_WWAN_1V8# */ + MX8MM_IOMUXC_SD1_RESET_B_GPIO2_IO10 0x102 + /* M2-B_W_DISABLE2_GPS_1V8# */ + MX8MM_IOMUXC_SD1_STROBE_GPIO2_IO11 0x102 + /* CLK_M2_32K768 */ + MX8MM_IOMUXC_GPIO1_IO00_ANAMIX_REF_CLK_32K 0x14 + /* M2-B_WAKE_WWAN_1V8# */ + MX8MM_IOMUXC_SAI5_RXFS_GPIO3_IO19 0x40000140 + /* M2-B_PCIE_WAKE# */ + MX8MM_IOMUXC_GPIO1_IO06_GPIO1_IO6 0x40000140 + /* M2-B_PCIE_CLKREQ# */ + MX8MM_IOMUXC_GPIO1_IO09_GPIO1_IO9 0x40000140 + >; + }; + + pinctrl_pmic: pmic-grp { + fsl,pins = < + MX8MM_IOMUXC_GPIO1_IO03_GPIO1_IO3 0x40000090 + >; + }; + + pinctrl_rtc: rtc-grp { + fsl,pins = < + /* RTC_IRQ# */ + MX8MM_IOMUXC_GPIO1_IO07_GPIO1_IO7 0x40000090 + >; + }; + + pinctrl_sai5: sai5-grp { + fsl,pins = < + MX8MM_IOMUXC_SAI5_MCLK_SAI5_MCLK 0x100 + MX8MM_IOMUXC_SAI5_RXD0_SAI5_RX_DATA0 0x0 + MX8MM_IOMUXC_SAI5_RXD1_SAI5_TX_SYNC 0x100 + MX8MM_IOMUXC_SAI5_RXD2_SAI5_TX_BCLK 0x100 + MX8MM_IOMUXC_SAI5_RXD3_SAI5_TX_DATA0 0x100 + >; + }; + + pinctrl_uart1: uart1-grp { + fsl,pins = < + MX8MM_IOMUXC_SAI2_RXC_UART1_DCE_RX 0x90 + MX8MM_IOMUXC_SAI2_RXD0_UART1_DCE_RTS_B 0x90 + MX8MM_IOMUXC_SAI2_RXFS_UART1_DCE_TX 0x50 + MX8MM_IOMUXC_SAI2_TXFS_UART1_DCE_CTS_B 0x50 + >; + }; + + pinctrl_uart2: uart2-grp { + fsl,pins = < + MX8MM_IOMUXC_SAI3_RXC_UART2_DCE_CTS_B 0x50 + MX8MM_IOMUXC_SAI3_RXD_UART2_DCE_RTS_B 0x90 + MX8MM_IOMUXC_SAI3_TXC_UART2_DCE_TX 0x50 + MX8MM_IOMUXC_SAI3_TXFS_UART2_DCE_RX 0x90 + >; + }; + + pinctrl_uart3: uart3-grp { + fsl,pins = < + MX8MM_IOMUXC_UART3_RXD_UART3_DCE_RX 0x40 + MX8MM_IOMUXC_UART3_TXD_UART3_DCE_TX 0x40 + >; + }; + + pinctrl_uart4: uart4-grp { + fsl,pins = < + MX8MM_IOMUXC_UART4_RXD_UART4_DCE_RX 0x40 + MX8MM_IOMUXC_UART4_TXD_UART4_DCE_TX 0x40 + >; + }; + + pinctrl_usb_hub: usb-hub-grp { + fsl,pins = < + /* USBHUB_RESET# */ + MX8MM_IOMUXC_SAI3_MCLK_GPIO5_IO2 0x4 + >; + }; + + pinctrl_usb_otg1: usb-otg1-grp { + fsl,pins = < + MX8MM_IOMUXC_GPIO1_IO10_GPIO1_IO10 0x40000000 + MX8MM_IOMUXC_GPIO1_IO12_USB1_OTG_PWR 0x4 + MX8MM_IOMUXC_GPIO1_IO13_USB1_OTG_OC 0x40000090 + >; + }; + + pinctrl_usdhc2_vcc_reg: usdhc2-vcc-reg-grp { + fsl,pins = < + MX8MM_IOMUXC_SD2_RESET_B_GPIO2_IO19 0x4 + >; + }; + + pinctrl_usdhc2: usdhc2-grp { + fsl,pins = < + MX8MM_IOMUXC_SD2_CLK_USDHC2_CLK 0x190 + MX8MM_IOMUXC_SD2_CMD_USDHC2_CMD 0x1d0 + MX8MM_IOMUXC_SD2_DATA0_USDHC2_DATA0 0x1d0 + MX8MM_IOMUXC_SD2_DATA1_USDHC2_DATA1 0x1d0 + MX8MM_IOMUXC_SD2_DATA2_USDHC2_DATA2 0x1d0 + MX8MM_IOMUXC_SD2_DATA3_USDHC2_DATA3 0x1d0 + MX8MM_IOMUXC_SD2_WP_USDHC2_WP 0x400000d6 + MX8MM_IOMUXC_SD2_CD_B_USDHC2_CD_B 0x0d6 + MX8MM_IOMUXC_GPIO1_IO04_USDHC2_VSELECT 0x1d0 + >; + }; + + pinctrl_usdhc2_100mhz: usdhc2-100mhz-grp { + fsl,pins = < + MX8MM_IOMUXC_SD2_CLK_USDHC2_CLK 0x194 + MX8MM_IOMUXC_SD2_CMD_USDHC2_CMD 0x1d4 + MX8MM_IOMUXC_SD2_DATA0_USDHC2_DATA0 0x1d4 + MX8MM_IOMUXC_SD2_DATA1_USDHC2_DATA1 0x1d4 + MX8MM_IOMUXC_SD2_DATA2_USDHC2_DATA2 0x1d4 + MX8MM_IOMUXC_SD2_DATA3_USDHC2_DATA3 0x1d4 + MX8MM_IOMUXC_SD2_WP_USDHC2_WP 0x400000d6 + MX8MM_IOMUXC_SD2_CD_B_USDHC2_CD_B 0x0d6 + MX8MM_IOMUXC_GPIO1_IO04_USDHC2_VSELECT 0x1d0 + >; + }; + + pinctrl_usdhc2_200mhz: usdhc2-200mhz-grp { + fsl,pins = < + MX8MM_IOMUXC_SD2_CLK_USDHC2_CLK 0x196 + MX8MM_IOMUXC_SD2_CMD_USDHC2_CMD 0x1d6 + MX8MM_IOMUXC_SD2_DATA0_USDHC2_DATA0 0x1d6 + MX8MM_IOMUXC_SD2_DATA1_USDHC2_DATA1 0x1d6 + MX8MM_IOMUXC_SD2_DATA2_USDHC2_DATA2 0x1d6 + MX8MM_IOMUXC_SD2_DATA3_USDHC2_DATA3 0x1d6 + MX8MM_IOMUXC_SD2_WP_USDHC2_WP 0x400000d6 + MX8MM_IOMUXC_SD2_CD_B_USDHC2_CD_B 0x0d6 + MX8MM_IOMUXC_GPIO1_IO04_USDHC2_VSELECT 0x1d0 + >; + }; + + pinctrl_usdhc3: usdhc3-grp { + fsl,pins = < + MX8MM_IOMUXC_NAND_WE_B_USDHC3_CLK 0x190 + MX8MM_IOMUXC_NAND_WP_B_USDHC3_CMD 0x1d0 + MX8MM_IOMUXC_NAND_DATA04_USDHC3_DATA0 0x1d0 + MX8MM_IOMUXC_NAND_DATA05_USDHC3_DATA1 0x1d0 + MX8MM_IOMUXC_NAND_DATA06_USDHC3_DATA2 0x1d0 + MX8MM_IOMUXC_NAND_DATA07_USDHC3_DATA3 0x1d0 + MX8MM_IOMUXC_NAND_RE_B_USDHC3_DATA4 0x1d0 + MX8MM_IOMUXC_NAND_CE2_B_USDHC3_DATA5 0x1d0 + MX8MM_IOMUXC_NAND_CE3_B_USDHC3_DATA6 0x1d0 + MX8MM_IOMUXC_NAND_CLE_USDHC3_DATA7 0x1d0 + MX8MM_IOMUXC_NAND_CE1_B_USDHC3_STROBE 0x190 + MX8MM_IOMUXC_NAND_READY_B_SD3_RESET_B 0x40 + >; + }; + + pinctrl_usdhc3_100mhz: usdhc3-100mhz-grp { + fsl,pins = < + MX8MM_IOMUXC_NAND_WE_B_USDHC3_CLK 0x194 + MX8MM_IOMUXC_NAND_WP_B_USDHC3_CMD 0x1d4 + MX8MM_IOMUXC_NAND_DATA04_USDHC3_DATA0 0x1d4 + MX8MM_IOMUXC_NAND_DATA05_USDHC3_DATA1 0x1d4 + MX8MM_IOMUXC_NAND_DATA06_USDHC3_DATA2 0x1d4 + MX8MM_IOMUXC_NAND_DATA07_USDHC3_DATA3 0x1d4 + MX8MM_IOMUXC_NAND_RE_B_USDHC3_DATA4 0x1d4 + MX8MM_IOMUXC_NAND_CE2_B_USDHC3_DATA5 0x1d4 + MX8MM_IOMUXC_NAND_CE3_B_USDHC3_DATA6 0x1d4 + MX8MM_IOMUXC_NAND_CLE_USDHC3_DATA7 0x1d4 + MX8MM_IOMUXC_NAND_CE1_B_USDHC3_STROBE 0x194 + MX8MM_IOMUXC_NAND_READY_B_SD3_RESET_B 0x40 + >; + }; + + pinctrl_usdhc3_200mhz: usdhc3-200mhz-grp { + fsl,pins = < + MX8MM_IOMUXC_NAND_WE_B_USDHC3_CLK 0x196 + MX8MM_IOMUXC_NAND_WP_B_USDHC3_CMD 0x1d6 + MX8MM_IOMUXC_NAND_DATA04_USDHC3_DATA0 0x1d6 + MX8MM_IOMUXC_NAND_DATA05_USDHC3_DATA1 0x1d6 + MX8MM_IOMUXC_NAND_DATA06_USDHC3_DATA2 0x1d6 + MX8MM_IOMUXC_NAND_DATA07_USDHC3_DATA3 0x1d6 + MX8MM_IOMUXC_NAND_RE_B_USDHC3_DATA4 0x1d6 + MX8MM_IOMUXC_NAND_CE2_B_USDHC3_DATA5 0x1d6 + MX8MM_IOMUXC_NAND_CE3_B_USDHC3_DATA6 0x1d6 + MX8MM_IOMUXC_NAND_CLE_USDHC3_DATA7 0x1d6 + MX8MM_IOMUXC_NAND_CE1_B_USDHC3_STROBE 0x196 + MX8MM_IOMUXC_NAND_READY_B_SD3_RESET_B 0x40 + >; + }; + + pinctrl_watchdog_gpio: watchdog-gpio-grp { + fsl,pins = < + /* WDOG_B# */ + MX8MM_IOMUXC_GPIO1_IO02_GPIO1_IO2 0x26 + /* WDOG_EN -- ungate WDT RESET# signal propagation */ + MX8MM_IOMUXC_SD1_DATA7_GPIO2_IO9 0x6 + /* WDOG_KICK# / WDI */ + MX8MM_IOMUXC_GPIO1_IO08_GPIO1_IO8 0x26 + >; + }; +}; + +&pcie_phy { + fsl,clkreq-unsupported; /* CLKREQ_B is not connected to suitable input */ + fsl,refclk-pad-mode = <IMX8_PCIE_REFCLK_PAD_INPUT>; + fsl,tx-deemph-gen1 = <0x2d>; + fsl,tx-deemph-gen2 = <0xf>; + clocks = <&pcieclk 0>; + status = "okay"; +}; + +&pcie0 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pcie0>; + reset-gpio = <&gpio1 5 GPIO_ACTIVE_LOW>; + clocks = <&clk IMX8MM_CLK_PCIE1_ROOT>, <&clk IMX8MM_CLK_PCIE1_AUX>, + <&pcieclk 0>; + clock-names = "pcie", "pcie_aux", "pcie_bus"; + assigned-clocks = <&clk IMX8MM_CLK_PCIE1_AUX>, + <&clk IMX8MM_CLK_PCIE1_CTRL>; + assigned-clock-rates = <10000000>, <250000000>; + assigned-clock-parents = <&clk IMX8MM_SYS_PLL2_50M>, + <&clk IMX8MM_SYS_PLL2_250M>; + status = "okay"; +}; + +&pwm1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_panel_pwm>; + /* Disabled by default, unless display board plugged in. */ + status = "disabled"; +}; + +&sai5 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_sai5>; + fsl,sai-mclk-direction-output; + /* Input into codec PLL */ + assigned-clocks = <&clk IMX8MM_CLK_SAI5>; + assigned-clock-parents = <&clk IMX8MM_AUDIO_PLL2_OUT>; + assigned-clock-rates = <22579200>; + /* Disabled by default, unless display board plugged in. */ + status = "disabled"; +}; + +&uart1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart1>; + uart-has-rtscts; + status = "disabled"; +}; + +&uart2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart2>; + status = "disabled"; +}; + +&uart3 { /* A53 Debug */ + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart3>; + status = "okay"; +}; + +&uart4 { /* M4 Debug */ + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart4>; + /* UART4 is reserved for CM and RDC blocks CA access to UART4. */ + status = "disabled"; +}; + +&usbotg1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usb_otg1>; + dr_mode = "otg"; + status = "okay"; +}; + +&usbotg2 { + disable-over-current; + dr_mode = "host"; + status = "okay"; +}; + +&usdhc2 { /* MicroSD */ + assigned-clocks = <&clk IMX8MM_CLK_USDHC2_ROOT>; + pinctrl-names = "default", "state_100mhz", "state_200mhz"; + pinctrl-0 = <&pinctrl_usdhc2>; + pinctrl-1 = <&pinctrl_usdhc2_100mhz>; + pinctrl-2 = <&pinctrl_usdhc2_200mhz>; + bus-width = <4>; + vmmc-supply = <®_usdhc2_vcc>; + status = "okay"; +}; + +&usdhc3 { /* eMMC */ + assigned-clocks = <&clk IMX8MM_CLK_USDHC3_ROOT>; + assigned-clock-rates = <400000000>; + pinctrl-names = "default", "state_100mhz", "state_200mhz"; + pinctrl-0 = <&pinctrl_usdhc3>; + pinctrl-1 = <&pinctrl_usdhc3_100mhz>; + pinctrl-2 = <&pinctrl_usdhc3_200mhz>; + bus-width = <8>; + non-removable; + vmmc-supply = <&buck4_reg>; + vqmmc-supply = <&buck5_reg>; + status = "okay"; +}; + +&wdog1 { + status = "okay"; +}; diff --git a/arch/arm64/boot/dts/freescale/imx8mm-emcon.dtsi b/arch/arm64/boot/dts/freescale/imx8mm-emcon.dtsi index 7c4af71baab9..0dbdc9ec3fe5 100644 --- a/arch/arm64/boot/dts/freescale/imx8mm-emcon.dtsi +++ b/arch/arm64/boot/dts/freescale/imx8mm-emcon.dtsi @@ -98,7 +98,7 @@ pinctrl-1 = <&pinctrl_flexspi1>; status = "okay"; - flash0: spi-flash@0 { + flash0: flash@0 { reg = <0>; #address-cells = <1>; #size-cells = <1>; diff --git a/arch/arm64/boot/dts/freescale/imx8mm-evk.dtsi b/arch/arm64/boot/dts/freescale/imx8mm-evk.dtsi index 6d67df7692f1..c42b966f7a64 100644 --- a/arch/arm64/boot/dts/freescale/imx8mm-evk.dtsi +++ b/arch/arm64/boot/dts/freescale/imx8mm-evk.dtsi @@ -59,6 +59,14 @@ enable-active-high; }; + backlight: backlight { + compatible = "pwm-backlight"; + pwms = <&pwm1 0 5000000 0>; + brightness-levels = <0 255>; + num-interpolated-steps = <255>; + default-brightness-level = <250>; + }; + ir-receiver { compatible = "gpio-ir-receiver"; gpios = <&gpio1 13 GPIO_ACTIVE_LOW>; @@ -395,6 +403,12 @@ status = "okay"; }; +&pwm1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_backlight>; + status = "okay"; +}; + &iomuxc { pinctrl_fec1: fec1grp { fsl,pins = < @@ -549,4 +563,10 @@ MX8MM_IOMUXC_GPIO1_IO02_WDOG1_WDOG_B 0x166 >; }; + + pinctrl_backlight: backlightgrp { + fsl,pins = < + MX8MM_IOMUXC_GPIO1_IO01_PWM1_OUT 0x06 + >; + }; }; diff --git a/arch/arm64/boot/dts/freescale/imx8mm-kontron-n801x-s.dts b/arch/arm64/boot/dts/freescale/imx8mm-kontron-n801x-s.dts index d40caf14ac4a..23be1ec538ba 100644 --- a/arch/arm64/boot/dts/freescale/imx8mm-kontron-n801x-s.dts +++ b/arch/arm64/boot/dts/freescale/imx8mm-kontron-n801x-s.dts @@ -182,7 +182,7 @@ #address-cells = <1>; #size-cells = <0>; - usbnet: usbether@1 { + usbnet: ethernet@1 { compatible = "usb424,ec00"; reg = <1>; local-mac-address = [ 00 00 00 00 00 00 ]; diff --git a/arch/arm64/boot/dts/freescale/imx8mm-kontron-n801x-som.dtsi b/arch/arm64/boot/dts/freescale/imx8mm-kontron-n801x-som.dtsi index 22a5ef771d4e..8f90eb02550d 100644 --- a/arch/arm64/boot/dts/freescale/imx8mm-kontron-n801x-som.dtsi +++ b/arch/arm64/boot/dts/freescale/imx8mm-kontron-n801x-som.dtsi @@ -66,7 +66,7 @@ cs-gpios = <&gpio5 9 GPIO_ACTIVE_LOW>; status = "okay"; - spi-flash@0 { + flash@0 { compatible = "mxicy,mx25r1635f", "jedec,spi-nor"; spi-max-frequency = <80000000>; reg = <0>; diff --git a/arch/arm64/boot/dts/freescale/imx8mm-mx8menlo.dts b/arch/arm64/boot/dts/freescale/imx8mm-mx8menlo.dts new file mode 100644 index 000000000000..92eaf4ef4563 --- /dev/null +++ b/arch/arm64/boot/dts/freescale/imx8mm-mx8menlo.dts @@ -0,0 +1,334 @@ +// SPDX-License-Identifier: GPL-2.0+ OR MIT +/* + * Copyright 2021-2022 Marek Vasut <marex@denx.de> + */ + +/dts-v1/; + +#include "imx8mm-verdin.dtsi" + +/ { + model = "MENLO MX8MM EMBEDDED DEVICE"; + compatible = "menlo,mx8menlo", + "toradex,verdin-imx8mm", + "fsl,imx8mm"; + + /delete-node/ gpio-keys; + + leds { + compatible = "gpio-leds"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_led>; + + user1 { + label = "TestLed601"; + gpios = <&gpio4 18 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "mmc0"; + }; + + user2 { + label = "TestLed602"; + gpios = <&gpio4 10 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "heartbeat"; + }; + }; + + beeper { + compatible = "gpio-beeper"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_beeper>; + gpios = <&gpio5 3 GPIO_ACTIVE_HIGH>; + }; + + /* Fixed clock dedicated to SPI CAN on carrier board */ + clk_xtal20: clk-xtal20 { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <20000000>; + }; +}; + +&ecspi1 { + #address-cells = <1>; + #size-cells = <0>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_ecspi1>; + cs-gpios = <&gpio5 9 GPIO_ACTIVE_LOW>; + status = "okay"; + + /* CAN controller on the baseboard */ + canfd: can@0 { + compatible = "microchip,mcp2518fd"; + clocks = <&clk_xtal20>; + interrupt-parent = <&gpio1>; + interrupts = <8 IRQ_TYPE_EDGE_FALLING>; + reg = <0>; + spi-max-frequency = <2000000>; + }; + +}; + +&ecspi2 { + pinctrl-0 = <&pinctrl_ecspi2 &pinctrl_gpio1>; + cs-gpios = <&gpio5 13 GPIO_ACTIVE_LOW>, <&gpio3 4 GPIO_ACTIVE_LOW>; + status = "okay"; + + spidev@0 { + compatible = "menlo,m53cpld"; + reg = <0>; + spi-max-frequency = <25000000>; + }; + + spidev@1 { + compatible = "menlo,m53cpld"; + reg = <1>; + spi-max-frequency = <25000000>; + }; + +}; + +ðphy0 { + max-speed = <100>; +}; + +&fec1 { + status = "okay"; +}; + +&flexspi { + status = "okay"; + + flash@0 { + reg = <0>; + #address-cells = <1>; + #size-cells = <1>; + compatible = "jedec,spi-nor"; + spi-max-frequency = <66000000>; + spi-rx-bus-width = <4>; + spi-tx-bus-width = <4>; + }; +}; + +&gpio1 { + gpio-line-names = + "", "", "", "", + "", "", "", "", + "", "", "", "", + "", "", "", "", + "", "", "", "", + "", "", "", "", + "", "", "", "", + "", "", "", ""; +}; + +&gpio2 { + gpio-line-names = + "", "", "", "", + "", "", "", "", + "", "", "", "", + "", "", "", "", + "", "", "", "", + "", "", "", "", + "", "", "", "", + "", "", "", ""; +}; + +&gpio3 { + gpio-line-names = + "", "", "", "", + "", "", "", "", + "", "", "", "", + "", "", "", "", + "", "", "", "", + "", "", "DISP_reset", "KBD_intI", + "", "", "", "", + "", "", "", ""; +}; + +&gpio4 { + /* + * CPLD_D[n] is ARM_CPLD[n] in schematic + * CPLD_int is SA_INTERRUPT in schematic + * CPLD_reset is RESET_SOFT in schematic + */ + gpio-line-names = + "CPLD_D[1]", "CPLD_int", "CPLD_reset", "", + "", "CPLD_D[0]", "", "", + "", "", "", "CPLD_D[2]", + "CPLD_D[3]", "CPLD_D[4]", "CPLD_D[5]", "CPLD_D[6]", + "CPLD_D[7]", "", "", "", + "", "", "", "", + "", "", "", "KBD_intK", + "", "", "", ""; +}; + +&gpio5 { + gpio-line-names = + "", "", "", "", + "", "", "", "", + "", "", "", "", + "", "", "", "", + "", "", "", "", + "", "", "", "", + "", "", "", "", + "", "", "", ""; +}; + +&gpio_expander_21 { + status = "okay"; +}; + +&hwmon { + status = "okay"; +}; + +&i2c3 { + status = "okay"; +}; + +&i2c4 { + /* None of this is present on the SoM. */ + /delete-node/ bridge@2c; + /delete-node/ hdmi@48; + /delete-node/ touch@4a; + /delete-node/ sensor@4f; + /delete-node/ eeprom@50; + /delete-node/ eeprom@57; +}; + +&iomuxc { + pinctrl-0 = <&pinctrl_gpio7>, <&pinctrl_gpio_hog1>, + <&pinctrl_gpio_hog2>, <&pinctrl_gpio_hog3>; + + pinctrl_beeper: beepergrp { + fsl,pins = < + MX8MM_IOMUXC_SPDIF_TX_GPIO5_IO3 0x1c4 + >; + }; + + pinctrl_ecspi1: ecspi1grp { + fsl,pins = < + MX8MM_IOMUXC_ECSPI1_SCLK_ECSPI1_SCLK 0x4 + MX8MM_IOMUXC_ECSPI1_MOSI_ECSPI1_MOSI 0x4 + MX8MM_IOMUXC_ECSPI1_MISO_ECSPI1_MISO 0x1c4 + MX8MM_IOMUXC_ECSPI1_SS0_GPIO5_IO9 0x1c4 + >; + }; + + pinctrl_led: ledgrp { + fsl,pins = < + MX8MM_IOMUXC_SAI1_TXD6_GPIO4_IO18 0x1c4 + MX8MM_IOMUXC_SAI1_TXFS_GPIO4_IO10 0x1c4 + >; + }; + + pinctrl_uart4_rts: uart4rtsgrp { + fsl,pins = < + /* SODIMM 222 */ + MX8MM_IOMUXC_GPIO1_IO09_GPIO1_IO9 0x184 + >; + }; +}; + +&pinctrl_gpio1 { + fsl,pins = < + /* SODIMM 206 */ + MX8MM_IOMUXC_NAND_CE3_B_GPIO3_IO4 0x1c4 + >; +}; + +&pinctrl_gpio_hog1 { + fsl,pins = < + /* SODIMM 88 */ + MX8MM_IOMUXC_SAI1_MCLK_GPIO4_IO20 0x1c4 + /* CPLD_int */ + MX8MM_IOMUXC_SAI1_RXC_GPIO4_IO1 0x1c4 + /* CPLD_reset */ + MX8MM_IOMUXC_SAI1_RXD0_GPIO4_IO2 0x1c4 + /* SODIMM 94 */ + MX8MM_IOMUXC_SAI1_RXD1_GPIO4_IO3 0x1c4 + /* SODIMM 96 */ + MX8MM_IOMUXC_SAI1_RXD2_GPIO4_IO4 0x1c4 + /* CPLD_D[7] */ + MX8MM_IOMUXC_SAI1_RXD3_GPIO4_IO5 0x1c4 + /* CPLD_D[6] */ + MX8MM_IOMUXC_SAI1_RXFS_GPIO4_IO0 0x1c4 + /* CPLD_D[5] */ + MX8MM_IOMUXC_SAI1_TXC_GPIO4_IO11 0x1c4 + /* CPLD_D[4] */ + MX8MM_IOMUXC_SAI1_TXD0_GPIO4_IO12 0x1c4 + /* CPLD_D[3] */ + MX8MM_IOMUXC_SAI1_TXD1_GPIO4_IO13 0x1c4 + /* CPLD_D[2] */ + MX8MM_IOMUXC_SAI1_TXD2_GPIO4_IO14 0x1c4 + /* CPLD_D[1] */ + MX8MM_IOMUXC_SAI1_TXD3_GPIO4_IO15 0x1c4 + /* CPLD_D[0] */ + MX8MM_IOMUXC_SAI1_TXD4_GPIO4_IO16 0x1c4 + /* KBD_intK */ + MX8MM_IOMUXC_SAI2_MCLK_GPIO4_IO27 0x1c4 + /* DISP_reset */ + MX8MM_IOMUXC_SAI5_RXD1_GPIO3_IO22 0x1c4 + /* KBD_intI */ + MX8MM_IOMUXC_SAI5_RXD2_GPIO3_IO23 0x1c4 + /* SODIMM 46 */ + MX8MM_IOMUXC_SAI5_RXD3_GPIO3_IO24 0x1c4 + >; +}; + +&pinctrl_uart1 { + fsl,pins = < + /* SODIMM 149 */ + MX8MM_IOMUXC_SAI2_RXFS_UART1_DCE_TX 0x1c4 + /* SODIMM 147 */ + MX8MM_IOMUXC_SAI2_RXC_UART1_DCE_RX 0x1c4 + /* SODIMM 210 */ + MX8MM_IOMUXC_UART3_RXD_UART1_DTE_RTS_B 0x1c4 + /* SODIMM 212 */ + MX8MM_IOMUXC_UART3_TXD_UART1_DTE_CTS_B 0x1c4 + >; +}; + +®_usb_otg1_vbus { + /delete-property/ enable-active-high; + gpio = <&gpio1 12 GPIO_ACTIVE_LOW>; +}; + +®_usb_otg2_vbus { + /delete-property/ enable-active-high; + gpio = <&gpio1 14 GPIO_ACTIVE_LOW>; +}; + +&sai2 { + status = "disabled"; +}; + +&uart1 { + uart-has-rtscts; + status = "okay"; +}; + +&uart2 { + status = "okay"; +}; + +&uart4 { + pinctrl-0 = <&pinctrl_uart4 &pinctrl_uart4_rts>; + linux,rs485-enabled-at-boot-time; + rts-gpios = <&gpio1 9 GPIO_ACTIVE_HIGH>; + status = "okay"; +}; + +&usbotg1 { + dr_mode = "peripheral"; + status = "okay"; +}; + +&usbotg2 { + dr_mode = "host"; + status = "okay"; +}; + +&usdhc2 { + status = "okay"; +}; diff --git a/arch/arm64/boot/dts/freescale/imx8mm-venice-gw71xx.dtsi b/arch/arm64/boot/dts/freescale/imx8mm-venice-gw71xx.dtsi index cce55c3c5df0..c557dbf4dcd6 100644 --- a/arch/arm64/boot/dts/freescale/imx8mm-venice-gw71xx.dtsi +++ b/arch/arm64/boot/dts/freescale/imx8mm-venice-gw71xx.dtsi @@ -112,6 +112,7 @@ fsl,refclk-pad-mode = <IMX8_PCIE_REFCLK_PAD_INPUT>; fsl,clkreq-unsupported; clocks = <&pcie0_refclk>; + clock-names = "ref"; status = "okay"; }; diff --git a/arch/arm64/boot/dts/freescale/imx8mm-venice-gw72xx.dtsi b/arch/arm64/boot/dts/freescale/imx8mm-venice-gw72xx.dtsi index f61e4847fa49..41d0de6a7027 100644 --- a/arch/arm64/boot/dts/freescale/imx8mm-venice-gw72xx.dtsi +++ b/arch/arm64/boot/dts/freescale/imx8mm-venice-gw72xx.dtsi @@ -134,6 +134,7 @@ fsl,refclk-pad-mode = <IMX8_PCIE_REFCLK_PAD_INPUT>; fsl,clkreq-unsupported; clocks = <&pcie0_refclk>; + clock-names = "ref"; status = "okay"; }; diff --git a/arch/arm64/boot/dts/freescale/imx8mm-venice-gw73xx.dtsi b/arch/arm64/boot/dts/freescale/imx8mm-venice-gw73xx.dtsi index 023619648966..244ef8d6cc68 100644 --- a/arch/arm64/boot/dts/freescale/imx8mm-venice-gw73xx.dtsi +++ b/arch/arm64/boot/dts/freescale/imx8mm-venice-gw73xx.dtsi @@ -154,6 +154,7 @@ fsl,refclk-pad-mode = <IMX8_PCIE_REFCLK_PAD_INPUT>; fsl,clkreq-unsupported; clocks = <&pcie0_refclk>; + clock-names = "ref"; status = "okay"; }; @@ -221,6 +222,7 @@ pinctrl-0 = <&pinctrl_uart3>, <&pinctrl_bten>; cts-gpios = <&gpio5 8 GPIO_ACTIVE_LOW>; rts-gpios = <&gpio5 9 GPIO_ACTIVE_LOW>; + uart-has-rtscts; status = "okay"; bluetooth { diff --git a/arch/arm64/boot/dts/freescale/imx8mm-venice-gw7901.dts b/arch/arm64/boot/dts/freescale/imx8mm-venice-gw7901.dts index 7e7231046215..24737e89038a 100644 --- a/arch/arm64/boot/dts/freescale/imx8mm-venice-gw7901.dts +++ b/arch/arm64/boot/dts/freescale/imx8mm-venice-gw7901.dts @@ -678,6 +678,7 @@ fsl,refclk-pad-mode = <IMX8_PCIE_REFCLK_PAD_INPUT>; fsl,clkreq-unsupported; clocks = <&pcie0_refclk>; + clock-names = "ref"; status = "okay"; }; @@ -716,6 +717,7 @@ dtr-gpios = <&gpio1 14 GPIO_ACTIVE_LOW>; dsr-gpios = <&gpio1 1 GPIO_ACTIVE_LOW>; dcd-gpios = <&gpio1 11 GPIO_ACTIVE_LOW>; + uart-has-rtscts; status = "okay"; }; @@ -731,6 +733,7 @@ pinctrl-0 = <&pinctrl_uart3>, <&pinctrl_uart3_gpio>; cts-gpios = <&gpio4 10 GPIO_ACTIVE_LOW>; rts-gpios = <&gpio4 9 GPIO_ACTIVE_LOW>; + uart-has-rtscts; status = "okay"; }; @@ -739,6 +742,7 @@ pinctrl-0 = <&pinctrl_uart4>, <&pinctrl_uart4_gpio>; cts-gpios = <&gpio5 11 GPIO_ACTIVE_LOW>; rts-gpios = <&gpio5 12 GPIO_ACTIVE_LOW>; + uart-has-rtscts; status = "okay"; }; @@ -1087,15 +1091,3 @@ >; }; }; - -&cpu_alert0 { - temperature = <95000>; - hysteresis = <2000>; - type = "passive"; -}; - -&cpu_crit0 { - temperature = <105000>; - hysteresis = <2000>; - type = "critical"; -}; diff --git a/arch/arm64/boot/dts/freescale/imx8mm-venice-gw7902.dts b/arch/arm64/boot/dts/freescale/imx8mm-venice-gw7902.dts index edf0c7aaaef0..407ab4592b4c 100644 --- a/arch/arm64/boot/dts/freescale/imx8mm-venice-gw7902.dts +++ b/arch/arm64/boot/dts/freescale/imx8mm-venice-gw7902.dts @@ -394,6 +394,13 @@ gw,voltage-divider-ohms = <10000 10000>; }; + channel@9c { + gw,mode = <2>; + reg = <0x9c>; + label = "vdd_5p0"; + gw,voltage-divider-ohms = <10000 10000>; + }; + channel@a2 { gw,mode = <2>; reg = <0xa2>; @@ -595,7 +602,8 @@ &pcie_phy { fsl,refclk-pad-mode = <IMX8_PCIE_REFCLK_PAD_INPUT>; fsl,clkreq-unsupported; - clocks = <&clk IMX8MM_CLK_DUMMY>; + clocks = <&pcie0_refclk>; + clock-names = "ref"; status = "okay"; }; @@ -604,8 +612,8 @@ pinctrl-0 = <&pinctrl_pcie0>; reset-gpio = <&gpio4 5 GPIO_ACTIVE_LOW>; clocks = <&clk IMX8MM_CLK_PCIE1_ROOT>, <&clk IMX8MM_CLK_PCIE1_AUX>, - <&clk IMX8MM_CLK_DUMMY>, <&pcie0_refclk>; - clock-names = "pcie", "pcie_aux", "pcie_phy", "pcie_bus"; + <&pcie0_refclk>; + clock-names = "pcie", "pcie_aux", "pcie_bus"; assigned-clocks = <&clk IMX8MM_CLK_PCIE1_AUX>, <&clk IMX8MM_CLK_PCIE1_CTRL>; assigned-clock-rates = <10000000>, <250000000>; @@ -644,6 +652,7 @@ pinctrl-0 = <&pinctrl_uart1>, <&pinctrl_uart1_gpio>; rts-gpios = <&gpio4 10 GPIO_ACTIVE_LOW>; cts-gpios = <&gpio4 11 GPIO_ACTIVE_LOW>; + uart-has-rtscts; status = "okay"; }; @@ -660,6 +669,7 @@ pinctrl-0 = <&pinctrl_uart3>, <&pinctrl_uart3_gpio>; rts-gpios = <&gpio2 1 GPIO_ACTIVE_LOW>; cts-gpios = <&gpio2 0 GPIO_ACTIVE_LOW>; + uart-has-rtscts; status = "okay"; bluetooth { @@ -677,6 +687,7 @@ dtr-gpios = <&gpio4 3 GPIO_ACTIVE_LOW>; dsr-gpios = <&gpio4 4 GPIO_ACTIVE_LOW>; dcd-gpios = <&gpio4 6 GPIO_ACTIVE_LOW>; + uart-has-rtscts; status = "okay"; }; diff --git a/arch/arm64/boot/dts/freescale/imx8mm-venice-gw7903.dts b/arch/arm64/boot/dts/freescale/imx8mm-venice-gw7903.dts index 1deb2ea8fcc9..a7dae9bd4c11 100644 --- a/arch/arm64/boot/dts/freescale/imx8mm-venice-gw7903.dts +++ b/arch/arm64/boot/dts/freescale/imx8mm-venice-gw7903.dts @@ -540,6 +540,7 @@ fsl,refclk-pad-mode = <IMX8_PCIE_REFCLK_PAD_INPUT>; fsl,clkreq-unsupported; clocks = <&pcie0_refclk>; + clock-names = "ref"; status = "okay"; }; diff --git a/arch/arm64/boot/dts/freescale/imx8mm-verdin-dahlia.dtsi b/arch/arm64/boot/dts/freescale/imx8mm-verdin-dahlia.dtsi index aca5ae0d307d..c2a5c2f7b204 100644 --- a/arch/arm64/boot/dts/freescale/imx8mm-verdin-dahlia.dtsi +++ b/arch/arm64/boot/dts/freescale/imx8mm-verdin-dahlia.dtsi @@ -114,7 +114,7 @@ status = "okay"; }; -/* VERDIN I2S_1 */ +/* Verdin I2S_1 */ &sai2 { status = "okay"; }; diff --git a/arch/arm64/boot/dts/freescale/imx8mm-verdin-wifi.dtsi b/arch/arm64/boot/dts/freescale/imx8mm-verdin-wifi.dtsi index 3e06a6ce3406..017db9eab256 100644 --- a/arch/arm64/boot/dts/freescale/imx8mm-verdin-wifi.dtsi +++ b/arch/arm64/boot/dts/freescale/imx8mm-verdin-wifi.dtsi @@ -17,19 +17,6 @@ }; }; -/* On-module Wi-Fi */ -&usdhc3 { - bus-width = <4>; - keep-power-in-suspend; - non-removable; - pinctrl-names = "default", "state_100mhz", "state_200mhz"; - pinctrl-0 = <&pinctrl_usdhc3>, <&pinctrl_wifi_ctrl>; - pinctrl-1 = <&pinctrl_usdhc3_100mhz>, <&pinctrl_wifi_ctrl>; - pinctrl-2 = <&pinctrl_usdhc3_200mhz>, <&pinctrl_wifi_ctrl>; - vmmc-supply = <®_wifi_en>; - status = "okay"; -}; - &gpio3 { gpio-line-names = "SODIMM_52", "SODIMM_54", @@ -92,3 +79,16 @@ "SODIMM_135", "SODIMM_129"; }; + +/* On-module Wi-Fi */ +&usdhc3 { + bus-width = <4>; + keep-power-in-suspend; + non-removable; + pinctrl-names = "default", "state_100mhz", "state_200mhz"; + pinctrl-0 = <&pinctrl_usdhc3>, <&pinctrl_wifi_ctrl>; + pinctrl-1 = <&pinctrl_usdhc3_100mhz>, <&pinctrl_wifi_ctrl>; + pinctrl-2 = <&pinctrl_usdhc3_200mhz>, <&pinctrl_wifi_ctrl>; + vmmc-supply = <®_wifi_en>; + status = "okay"; +}; diff --git a/arch/arm64/boot/dts/freescale/imx8mm-verdin.dtsi b/arch/arm64/boot/dts/freescale/imx8mm-verdin.dtsi index 0d84d29e70f1..eafa88d980b3 100644 --- a/arch/arm64/boot/dts/freescale/imx8mm-verdin.dtsi +++ b/arch/arm64/boot/dts/freescale/imx8mm-verdin.dtsi @@ -86,7 +86,7 @@ regulator-boot-on; regulator-max-microvolt = <3300000>; regulator-min-microvolt = <3300000>; - regulator-name = "+V3.3_ETH"; + regulator-name = "On-module +V3.3_ETH"; startup-delay-us = <200000>; }; @@ -99,7 +99,7 @@ pinctrl-0 = <&pinctrl_reg_usb1_en>; regulator-max-microvolt = <5000000>; regulator-min-microvolt = <5000000>; - regulator-name = "usb_otg1_vbus"; + regulator-name = "USB_1_EN"; }; reg_usb_otg2_vbus: regulator-usb-otg2 { @@ -111,7 +111,7 @@ pinctrl-0 = <&pinctrl_reg_usb2_en>; regulator-max-microvolt = <5000000>; regulator-min-microvolt = <5000000>; - regulator-name = "usb_otg2_vbus"; + regulator-name = "USB_2_EN"; }; reg_usdhc2_vmmc: regulator-usdhc2 { @@ -306,7 +306,7 @@ "SODIMM_151", "SODIMM_153"; - ctrl_sleep_moci-hog { + ctrl-sleep-moci-hog { gpio-hog; /* Verdin CTRL_SLEEP_MOCI# (SODIMM 256) */ gpios = <1 GPIO_ACTIVE_HIGH>; @@ -337,6 +337,11 @@ reg = <0x25>; sd-vsel-gpios = <&gpio1 4 GPIO_ACTIVE_HIGH>; + /* + * The bootloader is expected to switch on the I2C level shifter for the TLA2024 ADC + * behind this PMIC. + */ + regulators { reg_vdd_soc: BUCK1 { nxp,dvs-run-voltage = <850000>; @@ -345,7 +350,7 @@ regulator-boot-on; regulator-max-microvolt = <850000>; regulator-min-microvolt = <800000>; - regulator-name = "+VDD_SOC"; + regulator-name = "On-module +VDD_SOC (BUCK1)"; regulator-ramp-delay = <3125>; }; @@ -356,7 +361,7 @@ regulator-boot-on; regulator-max-microvolt = <950000>; regulator-min-microvolt = <850000>; - regulator-name = "+VDD_ARM"; + regulator-name = "On-module +VDD_ARM (BUCK2)"; regulator-ramp-delay = <3125>; }; @@ -365,7 +370,7 @@ regulator-boot-on; regulator-max-microvolt = <950000>; regulator-min-microvolt = <850000>; - regulator-name = "+VDD_GPU_VPU_DDR"; + regulator-name = "On-module +VDD_GPU_VPU_DDR (BUCK3)"; }; reg_vdd_3v3: BUCK4 { @@ -373,7 +378,7 @@ regulator-boot-on; regulator-max-microvolt = <3300000>; regulator-min-microvolt = <3300000>; - regulator-name = "+V3.3"; + regulator-name = "On-module +V3.3 (BUCK4)"; }; reg_vdd_1v8: BUCK5 { @@ -381,7 +386,7 @@ regulator-boot-on; regulator-max-microvolt = <1800000>; regulator-min-microvolt = <1800000>; - regulator-name = "PWR_1V8_MOCI"; + regulator-name = "PWR_1V8_MOCI (BUCK5)"; }; reg_nvcc_dram: BUCK6 { @@ -389,7 +394,7 @@ regulator-boot-on; regulator-max-microvolt = <1100000>; regulator-min-microvolt = <1100000>; - regulator-name = "+VDD_DDR"; + regulator-name = "On-module +VDD_DDR (BUCK6)"; }; reg_nvcc_snvs: LDO1 { @@ -397,7 +402,7 @@ regulator-boot-on; regulator-max-microvolt = <1800000>; regulator-min-microvolt = <1800000>; - regulator-name = "+V1.8_SNVS"; + regulator-name = "On-module +V1.8_SNVS (LDO1)"; }; reg_vdd_snvs: LDO2 { @@ -405,7 +410,7 @@ regulator-boot-on; regulator-max-microvolt = <900000>; regulator-min-microvolt = <800000>; - regulator-name = "+V0.8_SNVS"; + regulator-name = "On-module +V0.8_SNVS (LDO2)"; }; reg_vdda: LDO3 { @@ -413,7 +418,7 @@ regulator-boot-on; regulator-max-microvolt = <1800000>; regulator-min-microvolt = <1800000>; - regulator-name = "+V1.8A"; + regulator-name = "On-module +V1.8A (LDO3)"; }; reg_vdd_phy: LDO4 { @@ -421,13 +426,13 @@ regulator-boot-on; regulator-max-microvolt = <900000>; regulator-min-microvolt = <900000>; - regulator-name = "+V0.9_MIPI"; + regulator-name = "On-module +V0.9_MIPI (LDO4)"; }; reg_nvcc_sd: LDO5 { regulator-max-microvolt = <3300000>; regulator-min-microvolt = <1800000>; - regulator-name = "+V3.3_1.8_SD"; + regulator-name = "On-module +V3.3_1.8_SD (LDO5)"; }; }; }; @@ -580,8 +585,10 @@ atmel_mxt_ts: touch@4a { compatible = "atmel,maxtouch"; - /* Verdin GPIO_9_DSI */ - /* (TOUCH_INT#, SODIMM 17, also routed to SN65dsi83 IRQ albeit currently unused) */ + /* + * Verdin GPIO_9_DSI + * (TOUCH_INT#, SODIMM 17, also routed to SN65DSI83 IRQ albeit currently unused) + */ interrupt-parent = <&gpio3>; interrupts = <15 IRQ_TYPE_EDGE_FALLING>; pinctrl-names = "default"; @@ -661,7 +668,7 @@ #pwm-cells = <3>; }; -/* VERDIN I2S_1 */ +/* Verdin I2S_1 */ &sai2 { #sound-dai-cells = <0>; assigned-clock-parents = <&clk IMX8MM_AUDIO_PLL1_OUT>; @@ -695,8 +702,8 @@ uart-has-rtscts; }; -/* Verdin UART_4 */ /* + * Verdin UART_4 * Resource allocated to M4 by default, must not be accessed from Cortex-A35 or you get an OOPS */ &uart4 { @@ -750,10 +757,11 @@ bus-width = <4>; cd-gpios = <&gpio2 12 GPIO_ACTIVE_LOW>; disable-wp; - pinctrl-names = "default", "state_100mhz", "state_200mhz"; + pinctrl-names = "default", "state_100mhz", "state_200mhz", "sleep"; pinctrl-0 = <&pinctrl_usdhc2>, <&pinctrl_usdhc2_cd>; pinctrl-1 = <&pinctrl_usdhc2_100mhz>, <&pinctrl_usdhc2_cd>; pinctrl-2 = <&pinctrl_usdhc2_200mhz>, <&pinctrl_usdhc2_cd>; + pinctrl-3 = <&pinctrl_usdhc2_sleep>, <&pinctrl_usdhc2_cd_sleep>; vmmc-supply = <®_usdhc2_vmmc>; }; @@ -774,235 +782,235 @@ pinctrl_can1_int: can1intgrp { fsl,pins = - <MX8MM_IOMUXC_GPIO1_IO06_GPIO1_IO6 0x1c4>; /* CAN_1_SPI_INT#_1.8V */ + <MX8MM_IOMUXC_GPIO1_IO06_GPIO1_IO6 0x146>; /* CAN_1_SPI_INT#_1.8V */ }; pinctrl_can2_int: can2intgrp { fsl,pins = - <MX8MM_IOMUXC_GPIO1_IO07_GPIO1_IO7 0x1c4>; /* CAN_2_SPI_INT#_1.8V */ + <MX8MM_IOMUXC_GPIO1_IO07_GPIO1_IO7 0x106>; /* CAN_2_SPI_INT#_1.8V, unused */ }; pinctrl_ctrl_sleep_moci: ctrlsleepmocigrp { fsl,pins = - <MX8MM_IOMUXC_SAI3_TXD_GPIO5_IO1 0x1c4>; /* SODIMM 256 */ + <MX8MM_IOMUXC_SAI3_TXD_GPIO5_IO1 0x106>; /* SODIMM 256 */ }; pinctrl_ecspi2: ecspi2grp { fsl,pins = - <MX8MM_IOMUXC_ECSPI2_SCLK_ECSPI2_SCLK 0x4>, /* SODIMM 196 */ - <MX8MM_IOMUXC_ECSPI2_MOSI_ECSPI2_MOSI 0x4>, /* SODIMM 200 */ - <MX8MM_IOMUXC_ECSPI2_MISO_ECSPI2_MISO 0x1c4>, /* SODIMM 198 */ - <MX8MM_IOMUXC_ECSPI2_SS0_GPIO5_IO13 0x1c4>; /* SODIMM 202 */ + <MX8MM_IOMUXC_ECSPI2_MISO_ECSPI2_MISO 0x6>, /* SODIMM 198 */ + <MX8MM_IOMUXC_ECSPI2_MOSI_ECSPI2_MOSI 0x6>, /* SODIMM 200 */ + <MX8MM_IOMUXC_ECSPI2_SCLK_ECSPI2_SCLK 0x6>, /* SODIMM 196 */ + <MX8MM_IOMUXC_ECSPI2_SS0_GPIO5_IO13 0x6>; /* SODIMM 202 */ }; pinctrl_ecspi3: ecspi3grp { fsl,pins = - <MX8MM_IOMUXC_UART1_RXD_ECSPI3_SCLK 0x4>, /* CAN_SPI_SCK_1.8V */ - <MX8MM_IOMUXC_UART1_TXD_ECSPI3_MOSI 0x4>, /* CAN_SPI_MOSI_1.8V */ - <MX8MM_IOMUXC_UART2_RXD_ECSPI3_MISO 0x1c4>, /* CAN_SPI_MISO_1.8V */ - <MX8MM_IOMUXC_UART2_TXD_GPIO5_IO25 0x1c4>, /* CAN_1_SPI_CS_1.8V# */ - <MX8MM_IOMUXC_GPIO1_IO05_GPIO1_IO5 0x1c4>; /* CAN_2_SPI_CS#_1.8V */ + <MX8MM_IOMUXC_GPIO1_IO05_GPIO1_IO5 0x146>, /* CAN_2_SPI_CS#_1.8V */ + <MX8MM_IOMUXC_UART1_RXD_ECSPI3_SCLK 0x6>, /* CAN_SPI_SCK_1.8V */ + <MX8MM_IOMUXC_UART1_TXD_ECSPI3_MOSI 0x6>, /* CAN_SPI_MOSI_1.8V */ + <MX8MM_IOMUXC_UART2_RXD_ECSPI3_MISO 0x6>, /* CAN_SPI_MISO_1.8V */ + <MX8MM_IOMUXC_UART2_TXD_GPIO5_IO25 0x6>; /* CAN_1_SPI_CS_1.8V# */ }; pinctrl_fec1: fec1grp { fsl,pins = <MX8MM_IOMUXC_ENET_MDC_ENET1_MDC 0x3>, <MX8MM_IOMUXC_ENET_MDIO_ENET1_MDIO 0x3>, - <MX8MM_IOMUXC_ENET_TD3_ENET1_RGMII_TD3 0x1f>, - <MX8MM_IOMUXC_ENET_TD2_ENET1_RGMII_TD2 0x1f>, - <MX8MM_IOMUXC_ENET_TD1_ENET1_RGMII_TD1 0x1f>, - <MX8MM_IOMUXC_ENET_TD0_ENET1_RGMII_TD0 0x1f>, - <MX8MM_IOMUXC_ENET_RD3_ENET1_RGMII_RD3 0x91>, - <MX8MM_IOMUXC_ENET_RD2_ENET1_RGMII_RD2 0x91>, - <MX8MM_IOMUXC_ENET_RD1_ENET1_RGMII_RD1 0x91>, <MX8MM_IOMUXC_ENET_RD0_ENET1_RGMII_RD0 0x91>, - <MX8MM_IOMUXC_ENET_TXC_ENET1_RGMII_TXC 0x1f>, + <MX8MM_IOMUXC_ENET_RD1_ENET1_RGMII_RD1 0x91>, + <MX8MM_IOMUXC_ENET_RD2_ENET1_RGMII_RD2 0x91>, + <MX8MM_IOMUXC_ENET_RD3_ENET1_RGMII_RD3 0x91>, <MX8MM_IOMUXC_ENET_RXC_ENET1_RGMII_RXC 0x91>, <MX8MM_IOMUXC_ENET_RX_CTL_ENET1_RGMII_RX_CTL 0x91>, + <MX8MM_IOMUXC_ENET_TD0_ENET1_RGMII_TD0 0x1f>, + <MX8MM_IOMUXC_ENET_TD1_ENET1_RGMII_TD1 0x1f>, + <MX8MM_IOMUXC_ENET_TD2_ENET1_RGMII_TD2 0x1f>, + <MX8MM_IOMUXC_ENET_TD3_ENET1_RGMII_TD3 0x1f>, + <MX8MM_IOMUXC_ENET_TXC_ENET1_RGMII_TXC 0x1f>, <MX8MM_IOMUXC_ENET_TX_CTL_ENET1_RGMII_TX_CTL 0x1f>, - <MX8MM_IOMUXC_GPIO1_IO10_GPIO1_IO10 0x1c4>; + <MX8MM_IOMUXC_GPIO1_IO10_GPIO1_IO10 0x146>; }; pinctrl_fec1_sleep: fec1-sleepgrp { fsl,pins = <MX8MM_IOMUXC_ENET_MDC_ENET1_MDC 0x3>, <MX8MM_IOMUXC_ENET_MDIO_ENET1_MDIO 0x3>, - <MX8MM_IOMUXC_ENET_TD3_GPIO1_IO18 0x1f>, - <MX8MM_IOMUXC_ENET_TD2_GPIO1_IO19 0x1f>, - <MX8MM_IOMUXC_ENET_TD1_GPIO1_IO20 0x1f>, - <MX8MM_IOMUXC_ENET_TD0_GPIO1_IO21 0x1f>, - <MX8MM_IOMUXC_ENET_RD3_ENET1_RGMII_RD3 0x91>, - <MX8MM_IOMUXC_ENET_RD2_ENET1_RGMII_RD2 0x91>, - <MX8MM_IOMUXC_ENET_RD1_ENET1_RGMII_RD1 0x91>, <MX8MM_IOMUXC_ENET_RD0_ENET1_RGMII_RD0 0x91>, - <MX8MM_IOMUXC_ENET_TXC_GPIO1_IO23 0x1f>, + <MX8MM_IOMUXC_ENET_RD1_ENET1_RGMII_RD1 0x91>, + <MX8MM_IOMUXC_ENET_RD2_ENET1_RGMII_RD2 0x91>, + <MX8MM_IOMUXC_ENET_RD3_ENET1_RGMII_RD3 0x91>, <MX8MM_IOMUXC_ENET_RXC_ENET1_RGMII_RXC 0x91>, <MX8MM_IOMUXC_ENET_RX_CTL_ENET1_RGMII_RX_CTL 0x91>, + <MX8MM_IOMUXC_ENET_TD0_GPIO1_IO21 0x1f>, + <MX8MM_IOMUXC_ENET_TD1_GPIO1_IO20 0x1f>, + <MX8MM_IOMUXC_ENET_TD2_GPIO1_IO19 0x1f>, + <MX8MM_IOMUXC_ENET_TD3_GPIO1_IO18 0x1f>, + <MX8MM_IOMUXC_ENET_TXC_GPIO1_IO23 0x1f>, <MX8MM_IOMUXC_ENET_TX_CTL_GPIO1_IO22 0x1f>, - <MX8MM_IOMUXC_GPIO1_IO10_GPIO1_IO10 0x184>; + <MX8MM_IOMUXC_GPIO1_IO10_GPIO1_IO10 0x106>; }; pinctrl_flexspi0: flexspi0grp { fsl,pins = - <MX8MM_IOMUXC_NAND_ALE_QSPI_A_SCLK 0x1c2>, /* SODIMM 52 */ - <MX8MM_IOMUXC_NAND_CE0_B_QSPI_A_SS0_B 0x82>, /* SODIMM 54 */ - <MX8MM_IOMUXC_NAND_CE1_B_QSPI_A_SS1_B 0x82>, /* SODIMM 64 */ - <MX8MM_IOMUXC_NAND_DQS_QSPI_A_DQS 0x82>, /* SODIMM 66 */ - <MX8MM_IOMUXC_NAND_DATA00_QSPI_A_DATA0 0x82>, /* SODIMM 56 */ - <MX8MM_IOMUXC_NAND_DATA01_QSPI_A_DATA1 0x82>, /* SODIMM 58 */ - <MX8MM_IOMUXC_NAND_DATA02_QSPI_A_DATA2 0x82>, /* SODIMM 60 */ - <MX8MM_IOMUXC_NAND_DATA03_QSPI_A_DATA3 0x82>; /* SODIMM 62 */ + <MX8MM_IOMUXC_NAND_ALE_QSPI_A_SCLK 0x106>, /* SODIMM 52 */ + <MX8MM_IOMUXC_NAND_CE0_B_QSPI_A_SS0_B 0x106>, /* SODIMM 54 */ + <MX8MM_IOMUXC_NAND_CE1_B_QSPI_A_SS1_B 0x106>, /* SODIMM 64 */ + <MX8MM_IOMUXC_NAND_DATA00_QSPI_A_DATA0 0x106>, /* SODIMM 56 */ + <MX8MM_IOMUXC_NAND_DATA01_QSPI_A_DATA1 0x106>, /* SODIMM 58 */ + <MX8MM_IOMUXC_NAND_DATA02_QSPI_A_DATA2 0x106>, /* SODIMM 60 */ + <MX8MM_IOMUXC_NAND_DATA03_QSPI_A_DATA3 0x106>, /* SODIMM 62 */ + <MX8MM_IOMUXC_NAND_DQS_QSPI_A_DQS 0x106>; /* SODIMM 66 */ }; pinctrl_gpio1: gpio1grp { fsl,pins = - <MX8MM_IOMUXC_NAND_CE3_B_GPIO3_IO4 0x184>; /* SODIMM 206 */ + <MX8MM_IOMUXC_NAND_CE3_B_GPIO3_IO4 0x106>; /* SODIMM 206 */ }; pinctrl_gpio2: gpio2grp { fsl,pins = - <MX8MM_IOMUXC_SPDIF_EXT_CLK_GPIO5_IO5 0x1c4>; /* SODIMM 208 */ + <MX8MM_IOMUXC_SPDIF_EXT_CLK_GPIO5_IO5 0x106>; /* SODIMM 208 */ }; pinctrl_gpio3: gpio3grp { fsl,pins = - <MX8MM_IOMUXC_UART3_RXD_GPIO5_IO26 0x184>; /* SODIMM 210 */ + <MX8MM_IOMUXC_UART3_RXD_GPIO5_IO26 0x106>; /* SODIMM 210 */ }; pinctrl_gpio4: gpio4grp { fsl,pins = - <MX8MM_IOMUXC_UART3_TXD_GPIO5_IO27 0x184>; /* SODIMM 212 */ + <MX8MM_IOMUXC_UART3_TXD_GPIO5_IO27 0x106>; /* SODIMM 212 */ }; pinctrl_gpio5: gpio5grp { fsl,pins = - <MX8MM_IOMUXC_GPIO1_IO00_GPIO1_IO0 0x184>; /* SODIMM 216 */ + <MX8MM_IOMUXC_GPIO1_IO00_GPIO1_IO0 0x106>; /* SODIMM 216 */ }; pinctrl_gpio6: gpio6grp { fsl,pins = - <MX8MM_IOMUXC_GPIO1_IO11_GPIO1_IO11 0x184>; /* SODIMM 218 */ + <MX8MM_IOMUXC_GPIO1_IO11_GPIO1_IO11 0x106>; /* SODIMM 218 */ }; pinctrl_gpio7: gpio7grp { fsl,pins = - <MX8MM_IOMUXC_GPIO1_IO08_GPIO1_IO8 0x184>; /* SODIMM 220 */ + <MX8MM_IOMUXC_GPIO1_IO08_GPIO1_IO8 0x106>; /* SODIMM 220 */ }; pinctrl_gpio8: gpio8grp { fsl,pins = - <MX8MM_IOMUXC_GPIO1_IO09_GPIO1_IO9 0x184>; /* SODIMM 222 */ + <MX8MM_IOMUXC_GPIO1_IO09_GPIO1_IO9 0x106>; /* SODIMM 222 */ }; /* Verdin GPIO_9_DSI (pulled-up as active-low) */ pinctrl_gpio_9_dsi: gpio9dsigrp { fsl,pins = - <MX8MM_IOMUXC_NAND_RE_B_GPIO3_IO15 0x1c4>; /* SODIMM 17 */ + <MX8MM_IOMUXC_NAND_RE_B_GPIO3_IO15 0x146>; /* SODIMM 17 */ }; - /* Verdin GPIO_10_DSI */ + /* Verdin GPIO_10_DSI (pulled-up as active-low) */ pinctrl_gpio_10_dsi: gpio10dsigrp { fsl,pins = - <MX8MM_IOMUXC_NAND_CE2_B_GPIO3_IO3 0x1c4>; /* SODIMM 21 */ + <MX8MM_IOMUXC_NAND_CE2_B_GPIO3_IO3 0x146>; /* SODIMM 21 */ }; pinctrl_gpio_hog1: gpiohog1grp { fsl,pins = - <MX8MM_IOMUXC_SAI1_MCLK_GPIO4_IO20 0x1c4>, /* SODIMM 88 */ - <MX8MM_IOMUXC_SAI1_RXC_GPIO4_IO1 0x1c4>, /* SODIMM 90 */ - <MX8MM_IOMUXC_SAI1_RXD0_GPIO4_IO2 0x1c4>, /* SODIMM 92 */ - <MX8MM_IOMUXC_SAI1_RXD1_GPIO4_IO3 0x1c4>, /* SODIMM 94 */ - <MX8MM_IOMUXC_SAI1_RXD2_GPIO4_IO4 0x1c4>, /* SODIMM 96 */ - <MX8MM_IOMUXC_SAI1_RXD3_GPIO4_IO5 0x1c4>, /* SODIMM 100 */ - <MX8MM_IOMUXC_SAI1_RXFS_GPIO4_IO0 0x1c4>, /* SODIMM 102 */ - <MX8MM_IOMUXC_SAI1_TXC_GPIO4_IO11 0x1c4>, /* SODIMM 104 */ - <MX8MM_IOMUXC_SAI1_TXD0_GPIO4_IO12 0x1c4>, /* SODIMM 106 */ - <MX8MM_IOMUXC_SAI1_TXD1_GPIO4_IO13 0x1c4>, /* SODIMM 108 */ - <MX8MM_IOMUXC_SAI1_TXD2_GPIO4_IO14 0x1c4>, /* SODIMM 112 */ - <MX8MM_IOMUXC_SAI1_TXD3_GPIO4_IO15 0x1c4>, /* SODIMM 114 */ - <MX8MM_IOMUXC_SAI1_TXD4_GPIO4_IO16 0x1c4>, /* SODIMM 116 */ - <MX8MM_IOMUXC_SAI1_TXD6_GPIO4_IO18 0x1c4>, /* SODIMM 118 */ - <MX8MM_IOMUXC_SAI1_TXFS_GPIO4_IO10 0x1c4>; /* SODIMM 120 */ + <MX8MM_IOMUXC_SAI1_MCLK_GPIO4_IO20 0x106>, /* SODIMM 88 */ + <MX8MM_IOMUXC_SAI1_RXC_GPIO4_IO1 0x106>, /* SODIMM 90 */ + <MX8MM_IOMUXC_SAI1_RXD0_GPIO4_IO2 0x106>, /* SODIMM 92 */ + <MX8MM_IOMUXC_SAI1_RXD1_GPIO4_IO3 0x106>, /* SODIMM 94 */ + <MX8MM_IOMUXC_SAI1_RXD2_GPIO4_IO4 0x106>, /* SODIMM 96 */ + <MX8MM_IOMUXC_SAI1_RXD3_GPIO4_IO5 0x106>, /* SODIMM 100 */ + <MX8MM_IOMUXC_SAI1_RXFS_GPIO4_IO0 0x106>, /* SODIMM 102 */ + <MX8MM_IOMUXC_SAI1_TXC_GPIO4_IO11 0x106>, /* SODIMM 104 */ + <MX8MM_IOMUXC_SAI1_TXD0_GPIO4_IO12 0x106>, /* SODIMM 106 */ + <MX8MM_IOMUXC_SAI1_TXD1_GPIO4_IO13 0x106>, /* SODIMM 108 */ + <MX8MM_IOMUXC_SAI1_TXD2_GPIO4_IO14 0x106>, /* SODIMM 112 */ + <MX8MM_IOMUXC_SAI1_TXD3_GPIO4_IO15 0x106>, /* SODIMM 114 */ + <MX8MM_IOMUXC_SAI1_TXD4_GPIO4_IO16 0x106>, /* SODIMM 116 */ + <MX8MM_IOMUXC_SAI1_TXD6_GPIO4_IO18 0x106>, /* SODIMM 118 */ + <MX8MM_IOMUXC_SAI1_TXFS_GPIO4_IO10 0x106>; /* SODIMM 120 */ }; pinctrl_gpio_hog2: gpiohog2grp { fsl,pins = - <MX8MM_IOMUXC_SAI3_MCLK_GPIO5_IO2 0x1c4>; /* SODIMM 91 */ + <MX8MM_IOMUXC_SAI3_MCLK_GPIO5_IO2 0x106>; /* SODIMM 91 */ }; pinctrl_gpio_hog3: gpiohog3grp { fsl,pins = - <MX8MM_IOMUXC_GPIO1_IO13_GPIO1_IO13 0x1c4>, /* SODIMM 157 */ - <MX8MM_IOMUXC_GPIO1_IO15_GPIO1_IO15 0x1c4>; /* SODIMM 187 */ + <MX8MM_IOMUXC_GPIO1_IO13_GPIO1_IO13 0x146>, /* SODIMM 157 */ + <MX8MM_IOMUXC_GPIO1_IO15_GPIO1_IO15 0x146>; /* SODIMM 187 */ }; pinctrl_gpio_keys: gpiokeysgrp { fsl,pins = - <MX8MM_IOMUXC_SAI3_RXFS_GPIO4_IO28 0x1c4>; /* SODIMM 252 */ + <MX8MM_IOMUXC_SAI3_RXFS_GPIO4_IO28 0x146>; /* SODIMM 252 */ }; /* On-module I2C */ pinctrl_i2c1: i2c1grp { fsl,pins = - <MX8MM_IOMUXC_I2C1_SCL_I2C1_SCL 0x400001c6>, /* PMIC_I2C_SCL */ - <MX8MM_IOMUXC_I2C1_SDA_I2C1_SDA 0x400001c6>; /* PMIC_I2C_SDA */ + <MX8MM_IOMUXC_I2C1_SCL_I2C1_SCL 0x40000146>, /* PMIC_I2C_SCL */ + <MX8MM_IOMUXC_I2C1_SDA_I2C1_SDA 0x40000146>; /* PMIC_I2C_SDA */ }; pinctrl_i2c1_gpio: i2c1gpiogrp { fsl,pins = - <MX8MM_IOMUXC_I2C1_SCL_GPIO5_IO14 0x400001c6>, /* PMIC_I2C_SCL */ - <MX8MM_IOMUXC_I2C1_SDA_GPIO5_IO15 0x400001c6>; /* PMIC_I2C_SDA */ + <MX8MM_IOMUXC_I2C1_SCL_GPIO5_IO14 0x146>, /* PMIC_I2C_SCL */ + <MX8MM_IOMUXC_I2C1_SDA_GPIO5_IO15 0x146>; /* PMIC_I2C_SDA */ }; /* Verdin I2C_4_CSI */ pinctrl_i2c2: i2c2grp { fsl,pins = - <MX8MM_IOMUXC_I2C2_SCL_I2C2_SCL 0x400001c6>, /* SODIMM 55 */ - <MX8MM_IOMUXC_I2C2_SDA_I2C2_SDA 0x400001c6>; /* SODIMM 53 */ + <MX8MM_IOMUXC_I2C2_SCL_I2C2_SCL 0x40000146>, /* SODIMM 55 */ + <MX8MM_IOMUXC_I2C2_SDA_I2C2_SDA 0x40000146>; /* SODIMM 53 */ }; pinctrl_i2c2_gpio: i2c2gpiogrp { fsl,pins = - <MX8MM_IOMUXC_I2C2_SCL_GPIO5_IO16 0x400001c6>, /* SODIMM 55 */ - <MX8MM_IOMUXC_I2C2_SDA_GPIO5_IO17 0x400001c6>; /* SODIMM 53 */ + <MX8MM_IOMUXC_I2C2_SCL_GPIO5_IO16 0x146>, /* SODIMM 55 */ + <MX8MM_IOMUXC_I2C2_SDA_GPIO5_IO17 0x146>; /* SODIMM 53 */ }; /* Verdin I2C_2_DSI */ pinctrl_i2c3: i2c3grp { fsl,pins = - <MX8MM_IOMUXC_I2C3_SCL_I2C3_SCL 0x400001c6>, /* SODIMM 95 */ - <MX8MM_IOMUXC_I2C3_SDA_I2C3_SDA 0x400001c6>; /* SODIMM 93 */ + <MX8MM_IOMUXC_I2C3_SCL_I2C3_SCL 0x40000146>, /* SODIMM 95 */ + <MX8MM_IOMUXC_I2C3_SDA_I2C3_SDA 0x40000146>; /* SODIMM 93 */ }; pinctrl_i2c3_gpio: i2c3gpiogrp { fsl,pins = - <MX8MM_IOMUXC_I2C3_SCL_GPIO5_IO18 0x400001c6>, /* SODIMM 95 */ - <MX8MM_IOMUXC_I2C3_SDA_GPIO5_IO19 0x400001c6>; /* SODIMM 93 */ + <MX8MM_IOMUXC_I2C3_SCL_GPIO5_IO18 0x146>, /* SODIMM 95 */ + <MX8MM_IOMUXC_I2C3_SDA_GPIO5_IO19 0x146>; /* SODIMM 93 */ }; /* Verdin I2C_1 */ pinctrl_i2c4: i2c4grp { fsl,pins = - <MX8MM_IOMUXC_I2C4_SCL_I2C4_SCL 0x400001c6>, /* SODIMM 14 */ - <MX8MM_IOMUXC_I2C4_SDA_I2C4_SDA 0x400001c6>; /* SODIMM 12 */ + <MX8MM_IOMUXC_I2C4_SCL_I2C4_SCL 0x40000146>, /* SODIMM 14 */ + <MX8MM_IOMUXC_I2C4_SDA_I2C4_SDA 0x40000146>; /* SODIMM 12 */ }; pinctrl_i2c4_gpio: i2c4gpiogrp { fsl,pins = - <MX8MM_IOMUXC_I2C4_SCL_GPIO5_IO20 0x400001c6>, /* SODIMM 14 */ - <MX8MM_IOMUXC_I2C4_SDA_GPIO5_IO21 0x400001c6>; /* SODIMM 12 */ + <MX8MM_IOMUXC_I2C4_SCL_GPIO5_IO20 0x146>, /* SODIMM 14 */ + <MX8MM_IOMUXC_I2C4_SDA_GPIO5_IO21 0x146>; /* SODIMM 12 */ }; /* Verdin I2S_2_BCLK (TOUCH_RESET#) */ pinctrl_i2s_2_bclk_touch_reset: i2s2bclktouchresetgrp { fsl,pins = - <MX8MM_IOMUXC_SAI5_RXD2_GPIO3_IO23 0x184>; /* SODIMM 42 */ + <MX8MM_IOMUXC_SAI5_RXD2_GPIO3_IO23 0x6>; /* SODIMM 42 */ }; /* Verdin I2S_2_D_OUT shared with SAI5 */ pinctrl_i2s_2_d_out_dsi_1_bkl_en: i2s2doutdsi1bklengrp { fsl,pins = - <MX8MM_IOMUXC_SAI5_RXD3_GPIO3_IO24 0x184>; /* SODIMM 46 */ + <MX8MM_IOMUXC_SAI5_RXD3_GPIO3_IO24 0x6>; /* SODIMM 46 */ }; pinctrl_pcie0: pcie0grp { @@ -1014,7 +1022,7 @@ pinctrl_pmic: pmicirqgrp { fsl,pins = - <MX8MM_IOMUXC_GPIO1_IO03_GPIO1_IO3 0x41>; /* PMIC_INT# */ + <MX8MM_IOMUXC_GPIO1_IO03_GPIO1_IO3 0x141>; /* PMIC_INT# */ }; /* Verdin PWM_3_DSI shared with GPIO1_IO1 */ @@ -1036,82 +1044,82 @@ /* Verdin PWM_3_DSI (pulled-down as active-high) shared with PWM1_OUT */ pinctrl_pwm_3_dsi_hpd_gpio: pwm3dsihpdgpiogrp { fsl,pins = - <MX8MM_IOMUXC_GPIO1_IO01_GPIO1_IO1 0x184>; /* SODIMM 19 */ + <MX8MM_IOMUXC_GPIO1_IO01_GPIO1_IO1 0x106>; /* SODIMM 19 */ }; pinctrl_reg_eth: regethgrp { fsl,pins = - <MX8MM_IOMUXC_SD2_WP_GPIO2_IO20 0x184>; /* PMIC_EN_ETH */ + <MX8MM_IOMUXC_SD2_WP_GPIO2_IO20 0x146>; /* PMIC_EN_ETH */ }; pinctrl_reg_usb1_en: regusb1engrp { fsl,pins = - <MX8MM_IOMUXC_GPIO1_IO12_GPIO1_IO12 0x184>; /* SODIMM 155 */ + <MX8MM_IOMUXC_GPIO1_IO12_GPIO1_IO12 0x106>; /* SODIMM 155 */ }; pinctrl_reg_usb2_en: regusb2engrp { fsl,pins = - <MX8MM_IOMUXC_GPIO1_IO14_GPIO1_IO14 0x184>; /* SODIMM 185 */ + <MX8MM_IOMUXC_GPIO1_IO14_GPIO1_IO14 0x106>; /* SODIMM 185 */ }; pinctrl_sai2: sai2grp { fsl,pins = - <MX8MM_IOMUXC_SAI2_TXFS_SAI2_TX_SYNC 0xd6>, /* SODIMM 32 */ - <MX8MM_IOMUXC_SAI2_TXC_SAI2_TX_BCLK 0xd6>, /* SODIMM 30 */ - <MX8MM_IOMUXC_SAI2_MCLK_SAI2_MCLK 0xd6>, /* SODIMM 38 */ - <MX8MM_IOMUXC_SAI2_RXD0_SAI2_RX_DATA0 0xd6>, /* SODIMM 36 */ - <MX8MM_IOMUXC_SAI2_TXD0_SAI2_TX_DATA0 0xd6>; /* SODIMM 34 */ + <MX8MM_IOMUXC_SAI2_MCLK_SAI2_MCLK 0x6>, /* SODIMM 38 */ + <MX8MM_IOMUXC_SAI2_TXC_SAI2_TX_BCLK 0x6>, /* SODIMM 30 */ + <MX8MM_IOMUXC_SAI2_TXFS_SAI2_TX_SYNC 0x6>, /* SODIMM 32 */ + <MX8MM_IOMUXC_SAI2_RXD0_SAI2_RX_DATA0 0x6>, /* SODIMM 36 */ + <MX8MM_IOMUXC_SAI2_TXD0_SAI2_TX_DATA0 0x6>; /* SODIMM 34 */ }; pinctrl_sai5: sai5grp { fsl,pins = - <MX8MM_IOMUXC_SAI5_RXD0_SAI5_RX_DATA0 0xd6>, /* SODIMM 48 */ - <MX8MM_IOMUXC_SAI5_RXD1_SAI5_TX_SYNC 0xd6>, /* SODIMM 44 */ - <MX8MM_IOMUXC_SAI5_RXD2_SAI5_TX_BCLK 0xd6>, /* SODIMM 42 */ - <MX8MM_IOMUXC_SAI5_RXD3_SAI5_TX_DATA0 0xd6>; /* SODIMM 46 */ + <MX8MM_IOMUXC_SAI5_RXD0_SAI5_RX_DATA0 0x6>, /* SODIMM 48 */ + <MX8MM_IOMUXC_SAI5_RXD1_SAI5_TX_SYNC 0x6>, /* SODIMM 44 */ + <MX8MM_IOMUXC_SAI5_RXD2_SAI5_TX_BCLK 0x6>, /* SODIMM 42 */ + <MX8MM_IOMUXC_SAI5_RXD3_SAI5_TX_DATA0 0x6>; /* SODIMM 46 */ }; /* control signal for optional ATTPM20P or SE050 */ pinctrl_pmic_tpm_ena: pmictpmenagrp { fsl,pins = - <MX8MM_IOMUXC_SAI1_TXD7_GPIO4_IO19 0x1c4>; /* PMIC_TPM_ENA */ + <MX8MM_IOMUXC_SAI1_TXD7_GPIO4_IO19 0x106>; /* PMIC_TPM_ENA */ }; pinctrl_tsp: tspgrp { fsl,pins = - <MX8MM_IOMUXC_SAI1_RXD4_GPIO4_IO6 0x140>, /* SODIMM 148 */ - <MX8MM_IOMUXC_SAI1_RXD5_GPIO4_IO7 0x140>, /* SODIMM 152 */ - <MX8MM_IOMUXC_SAI1_RXD6_GPIO4_IO8 0x140>, /* SODIMM 154 */ - <MX8MM_IOMUXC_SAI1_RXD7_GPIO4_IO9 0x140>, /* SODIMM 174 */ - <MX8MM_IOMUXC_SAI1_TXD5_GPIO4_IO17 0x140>; /* SODIMM 150 */ + <MX8MM_IOMUXC_SAI1_RXD4_GPIO4_IO6 0x6>, /* SODIMM 148 */ + <MX8MM_IOMUXC_SAI1_RXD5_GPIO4_IO7 0x6>, /* SODIMM 152 */ + <MX8MM_IOMUXC_SAI1_RXD6_GPIO4_IO8 0x6>, /* SODIMM 154 */ + <MX8MM_IOMUXC_SAI1_RXD7_GPIO4_IO9 0x146>, /* SODIMM 174 */ + <MX8MM_IOMUXC_SAI1_TXD5_GPIO4_IO17 0x6>; /* SODIMM 150 */ }; pinctrl_uart1: uart1grp { fsl,pins = - <MX8MM_IOMUXC_SAI2_RXFS_UART1_DCE_TX 0x1c4>, /* SODIMM 149 */ - <MX8MM_IOMUXC_SAI2_RXC_UART1_DCE_RX 0x1c4>; /* SODIMM 147 */ + <MX8MM_IOMUXC_SAI2_RXC_UART1_DCE_RX 0x146>, /* SODIMM 147 */ + <MX8MM_IOMUXC_SAI2_RXFS_UART1_DCE_TX 0x146>; /* SODIMM 149 */ }; pinctrl_uart2: uart2grp { fsl,pins = - <MX8MM_IOMUXC_SAI3_TXFS_UART2_DCE_RX 0x1c4>, /* SODIMM 129 */ - <MX8MM_IOMUXC_SAI3_TXC_UART2_DCE_TX 0x1c4>, /* SODIMM 131 */ - <MX8MM_IOMUXC_SAI3_RXC_UART2_DCE_CTS_B 0x1c4>, /* SODIMM 133 */ - <MX8MM_IOMUXC_SAI3_RXD_UART2_DCE_RTS_B 0x1c4>; /* SODIMM 135 */ + <MX8MM_IOMUXC_SAI3_RXC_UART2_DCE_CTS_B 0x146>, /* SODIMM 133 */ + <MX8MM_IOMUXC_SAI3_RXD_UART2_DCE_RTS_B 0x146>, /* SODIMM 135 */ + <MX8MM_IOMUXC_SAI3_TXC_UART2_DCE_TX 0x146>, /* SODIMM 131 */ + <MX8MM_IOMUXC_SAI3_TXFS_UART2_DCE_RX 0x146>; /* SODIMM 129 */ }; pinctrl_uart3: uart3grp { fsl,pins = - <MX8MM_IOMUXC_ECSPI1_SCLK_UART3_DCE_RX 0x1c4>, /* SODIMM 137 */ - <MX8MM_IOMUXC_ECSPI1_MOSI_UART3_DCE_TX 0x1c4>, /* SODIMM 139 */ - <MX8MM_IOMUXC_ECSPI1_MISO_UART3_DCE_CTS_B 0x1c4>, /* SODIMM 141 */ - <MX8MM_IOMUXC_ECSPI1_SS0_UART3_DCE_RTS_B 0x1c4>; /* SODIMM 143 */ + <MX8MM_IOMUXC_ECSPI1_MISO_UART3_DCE_CTS_B 0x146>, /* SODIMM 141 */ + <MX8MM_IOMUXC_ECSPI1_MOSI_UART3_DCE_TX 0x146>, /* SODIMM 139 */ + <MX8MM_IOMUXC_ECSPI1_SCLK_UART3_DCE_RX 0x146>, /* SODIMM 137 */ + <MX8MM_IOMUXC_ECSPI1_SS0_UART3_DCE_RTS_B 0x146>; /* SODIMM 143 */ }; pinctrl_uart4: uart4grp { fsl,pins = - <MX8MM_IOMUXC_UART4_RXD_UART4_DCE_RX 0x1c4>, /* SODIMM 151 */ - <MX8MM_IOMUXC_UART4_TXD_UART4_DCE_TX 0x1c4>; /* SODIMM 153 */ + <MX8MM_IOMUXC_UART4_RXD_UART4_DCE_RX 0x146>, /* SODIMM 151 */ + <MX8MM_IOMUXC_UART4_TXD_UART4_DCE_TX 0x146>; /* SODIMM 153 */ }; pinctrl_usdhc1: usdhc1grp { @@ -1164,101 +1172,124 @@ pinctrl_usdhc2_cd: usdhc2cdgrp { fsl,pins = - <MX8MM_IOMUXC_SD2_CD_B_GPIO2_IO12 0x1c4>; /* SODIMM 84 */ + <MX8MM_IOMUXC_SD2_CD_B_GPIO2_IO12 0x6>; /* SODIMM 84 */ + }; + + pinctrl_usdhc2_cd_sleep: usdhc2cdslpgrp { + fsl,pins = + <MX8MM_IOMUXC_SD2_CD_B_GPIO2_IO12 0x0>; /* SODIMM 84 */ }; pinctrl_usdhc2_pwr_en: usdhc2pwrengrp { fsl,pins = - <MX8MM_IOMUXC_NAND_CLE_GPIO3_IO5 0x184>; /* SODIMM 76 */ + <MX8MM_IOMUXC_NAND_CLE_GPIO3_IO5 0x6>; /* SODIMM 76 */ }; + /* + * Note: Due to ERR050080 we use discrete external on-module resistors pulling-up to the + * on-module +V3.3_1.8_SD (LDO5) rail and explicitly disable the internal pull-ups here. + */ pinctrl_usdhc2: usdhc2grp { fsl,pins = - <MX8MM_IOMUXC_SD2_CLK_USDHC2_CLK 0x190>, /* SODIMM 78 */ - <MX8MM_IOMUXC_SD2_CMD_USDHC2_CMD 0x1d0>, /* SODIMM 74 */ - <MX8MM_IOMUXC_SD2_DATA0_USDHC2_DATA0 0x1d0>, /* SODIMM 80 */ - <MX8MM_IOMUXC_SD2_DATA1_USDHC2_DATA1 0x1d0>, /* SODIMM 82 */ - <MX8MM_IOMUXC_SD2_DATA2_USDHC2_DATA2 0x1d0>, /* SODIMM 70 */ - <MX8MM_IOMUXC_SD2_DATA3_USDHC2_DATA3 0x1d0>, /* SODIMM 72 */ - <MX8MM_IOMUXC_GPIO1_IO04_USDHC2_VSELECT 0x1d0>; + <MX8MM_IOMUXC_GPIO1_IO04_USDHC2_VSELECT 0x10>, + <MX8MM_IOMUXC_SD2_CLK_USDHC2_CLK 0x90>, /* SODIMM 78 */ + <MX8MM_IOMUXC_SD2_CMD_USDHC2_CMD 0x90>, /* SODIMM 74 */ + <MX8MM_IOMUXC_SD2_DATA0_USDHC2_DATA0 0x90>, /* SODIMM 80 */ + <MX8MM_IOMUXC_SD2_DATA1_USDHC2_DATA1 0x90>, /* SODIMM 82 */ + <MX8MM_IOMUXC_SD2_DATA2_USDHC2_DATA2 0x90>, /* SODIMM 70 */ + <MX8MM_IOMUXC_SD2_DATA3_USDHC2_DATA3 0x90>; /* SODIMM 72 */ }; pinctrl_usdhc2_100mhz: usdhc2-100mhzgrp { fsl,pins = - <MX8MM_IOMUXC_SD2_CLK_USDHC2_CLK 0x194>, - <MX8MM_IOMUXC_SD2_CMD_USDHC2_CMD 0x1d4>, - <MX8MM_IOMUXC_SD2_DATA0_USDHC2_DATA0 0x1d4>, - <MX8MM_IOMUXC_SD2_DATA1_USDHC2_DATA1 0x1d4>, - <MX8MM_IOMUXC_SD2_DATA2_USDHC2_DATA2 0x1d4>, - <MX8MM_IOMUXC_SD2_DATA3_USDHC2_DATA3 0x1d4>, - <MX8MM_IOMUXC_GPIO1_IO04_USDHC2_VSELECT 0x1d0>; + <MX8MM_IOMUXC_GPIO1_IO04_USDHC2_VSELECT 0x10>, + <MX8MM_IOMUXC_SD2_CLK_USDHC2_CLK 0x94>, + <MX8MM_IOMUXC_SD2_CMD_USDHC2_CMD 0x94>, + <MX8MM_IOMUXC_SD2_DATA0_USDHC2_DATA0 0x94>, + <MX8MM_IOMUXC_SD2_DATA1_USDHC2_DATA1 0x94>, + <MX8MM_IOMUXC_SD2_DATA2_USDHC2_DATA2 0x94>, + <MX8MM_IOMUXC_SD2_DATA3_USDHC2_DATA3 0x94>; }; pinctrl_usdhc2_200mhz: usdhc2-200mhzgrp { fsl,pins = - <MX8MM_IOMUXC_SD2_CLK_USDHC2_CLK 0x196>, - <MX8MM_IOMUXC_SD2_CMD_USDHC2_CMD 0x1d6>, - <MX8MM_IOMUXC_SD2_DATA0_USDHC2_DATA0 0x1d6>, - <MX8MM_IOMUXC_SD2_DATA1_USDHC2_DATA1 0x1d6>, - <MX8MM_IOMUXC_SD2_DATA2_USDHC2_DATA2 0x1d6>, - <MX8MM_IOMUXC_SD2_DATA3_USDHC2_DATA3 0x1d6>, - <MX8MM_IOMUXC_GPIO1_IO04_USDHC2_VSELECT 0x1d0>; + <MX8MM_IOMUXC_GPIO1_IO04_USDHC2_VSELECT 0x10>, + <MX8MM_IOMUXC_SD2_CLK_USDHC2_CLK 0x96>, + <MX8MM_IOMUXC_SD2_CMD_USDHC2_CMD 0x96>, + <MX8MM_IOMUXC_SD2_DATA0_USDHC2_DATA0 0x96>, + <MX8MM_IOMUXC_SD2_DATA1_USDHC2_DATA1 0x96>, + <MX8MM_IOMUXC_SD2_DATA2_USDHC2_DATA2 0x96>, + <MX8MM_IOMUXC_SD2_DATA3_USDHC2_DATA3 0x96>; + }; + + /* Avoid backfeeding with removed card power */ + pinctrl_usdhc2_sleep: usdhc2slpgrp { + fsl,pins = + <MX8MM_IOMUXC_GPIO1_IO04_USDHC2_VSELECT 0x0>, + <MX8MM_IOMUXC_SD2_CLK_USDHC2_CLK 0x0>, + <MX8MM_IOMUXC_SD2_CMD_USDHC2_CMD 0x0>, + <MX8MM_IOMUXC_SD2_DATA0_USDHC2_DATA0 0x0>, + <MX8MM_IOMUXC_SD2_DATA1_USDHC2_DATA1 0x0>, + <MX8MM_IOMUXC_SD2_DATA2_USDHC2_DATA2 0x0>, + <MX8MM_IOMUXC_SD2_DATA3_USDHC2_DATA3 0x0>; }; - /* On-module Wi-Fi/BT or type specific SDHC interface */ - /* (e.g. on X52 extension slot of Verdin Development Board) */ + /* + * On-module Wi-Fi/BT or type specific SDHC interface + * (e.g. on X52 extension slot of Verdin Development Board) + */ pinctrl_usdhc3: usdhc3grp { fsl,pins = - <MX8MM_IOMUXC_NAND_WE_B_USDHC3_CLK 0x190>, - <MX8MM_IOMUXC_NAND_WP_B_USDHC3_CMD 0x1d0>, - <MX8MM_IOMUXC_NAND_DATA04_USDHC3_DATA0 0x1d0>, - <MX8MM_IOMUXC_NAND_DATA05_USDHC3_DATA1 0x1d0>, - <MX8MM_IOMUXC_NAND_DATA06_USDHC3_DATA2 0x1d0>, - <MX8MM_IOMUXC_NAND_DATA07_USDHC3_DATA3 0x1d0>; + <MX8MM_IOMUXC_NAND_DATA04_USDHC3_DATA0 0x150>, + <MX8MM_IOMUXC_NAND_DATA05_USDHC3_DATA1 0x150>, + <MX8MM_IOMUXC_NAND_DATA06_USDHC3_DATA2 0x150>, + <MX8MM_IOMUXC_NAND_DATA07_USDHC3_DATA3 0x150>, + <MX8MM_IOMUXC_NAND_WE_B_USDHC3_CLK 0x150>, + <MX8MM_IOMUXC_NAND_WP_B_USDHC3_CMD 0x150>; }; pinctrl_usdhc3_100mhz: usdhc3-100mhzgrp { fsl,pins = - <MX8MM_IOMUXC_NAND_WE_B_USDHC3_CLK 0x194>, - <MX8MM_IOMUXC_NAND_WP_B_USDHC3_CMD 0x1d4>, - <MX8MM_IOMUXC_NAND_DATA04_USDHC3_DATA0 0x1d4>, - <MX8MM_IOMUXC_NAND_DATA05_USDHC3_DATA1 0x1d4>, - <MX8MM_IOMUXC_NAND_DATA06_USDHC3_DATA2 0x1d4>, - <MX8MM_IOMUXC_NAND_DATA07_USDHC3_DATA3 0x1d4>; + <MX8MM_IOMUXC_NAND_DATA04_USDHC3_DATA0 0x154>, + <MX8MM_IOMUXC_NAND_DATA05_USDHC3_DATA1 0x154>, + <MX8MM_IOMUXC_NAND_DATA06_USDHC3_DATA2 0x154>, + <MX8MM_IOMUXC_NAND_DATA07_USDHC3_DATA3 0x154>, + <MX8MM_IOMUXC_NAND_WE_B_USDHC3_CLK 0x154>, + <MX8MM_IOMUXC_NAND_WP_B_USDHC3_CMD 0x154>; }; pinctrl_usdhc3_200mhz: usdhc3-200mhzgrp { fsl,pins = - <MX8MM_IOMUXC_NAND_WE_B_USDHC3_CLK 0x196>, - <MX8MM_IOMUXC_NAND_WP_B_USDHC3_CMD 0x1d6>, - <MX8MM_IOMUXC_NAND_DATA04_USDHC3_DATA0 0x1d6>, - <MX8MM_IOMUXC_NAND_DATA05_USDHC3_DATA1 0x1d6>, - <MX8MM_IOMUXC_NAND_DATA06_USDHC3_DATA2 0x1d6>, - <MX8MM_IOMUXC_NAND_DATA07_USDHC3_DATA3 0x1d6>; + <MX8MM_IOMUXC_NAND_DATA04_USDHC3_DATA0 0x156>, + <MX8MM_IOMUXC_NAND_DATA05_USDHC3_DATA1 0x156>, + <MX8MM_IOMUXC_NAND_DATA06_USDHC3_DATA2 0x156>, + <MX8MM_IOMUXC_NAND_DATA07_USDHC3_DATA3 0x156>, + <MX8MM_IOMUXC_NAND_WE_B_USDHC3_CLK 0x156>, + <MX8MM_IOMUXC_NAND_WP_B_USDHC3_CMD 0x156>; }; pinctrl_wdog: wdoggrp { fsl,pins = - <MX8MM_IOMUXC_GPIO1_IO02_WDOG1_WDOG_B 0xc6>; /* PMIC_WDI */ + <MX8MM_IOMUXC_GPIO1_IO02_WDOG1_WDOG_B 0x166>; /* PMIC_WDI */ }; pinctrl_wifi_ctrl: wifictrlgrp { fsl,pins = - <MX8MM_IOMUXC_NAND_READY_B_GPIO3_IO16 0x1c4>, /* WIFI_WKUP_BT */ - <MX8MM_IOMUXC_SAI1_RXD7_GPIO4_IO9 0x1c4>, /* WIFI_W_WKUP_HOST */ - <MX8MM_IOMUXC_SAI5_RXC_GPIO3_IO20 0x1c4>; /* WIFI_WKUP_WLAN */ + <MX8MM_IOMUXC_NAND_READY_B_GPIO3_IO16 0x46>, /* WIFI_WKUP_BT */ + <MX8MM_IOMUXC_SAI1_RXD7_GPIO4_IO9 0x146>, /* WIFI_W_WKUP_HOST */ + <MX8MM_IOMUXC_SAI5_RXC_GPIO3_IO20 0x46>; /* WIFI_WKUP_WLAN */ }; pinctrl_wifi_i2s: bti2sgrp { fsl,pins = - <MX8MM_IOMUXC_SAI1_RXD4_SAI6_TX_BCLK 0xd6>, /* WIFI_TX_BCLK */ - <MX8MM_IOMUXC_SAI1_RXD5_SAI6_TX_DATA0 0xd6>, /* WIFI_TX_DATA0 */ - <MX8MM_IOMUXC_SAI1_RXD6_SAI6_TX_SYNC 0xd6>, /* WIFI_TX_SYNC */ - <MX8MM_IOMUXC_SAI1_TXD5_SAI6_RX_DATA0 0xd6>; /* WIFI_RX_DATA0 */ + <MX8MM_IOMUXC_SAI1_RXD4_SAI6_TX_BCLK 0x6>, /* WIFI_TX_BCLK */ + <MX8MM_IOMUXC_SAI1_RXD5_SAI6_TX_DATA0 0x6>, /* WIFI_TX_DATA0 */ + <MX8MM_IOMUXC_SAI1_RXD6_SAI6_TX_SYNC 0x6>, /* WIFI_TX_SYNC */ + <MX8MM_IOMUXC_SAI1_TXD5_SAI6_RX_DATA0 0x6>; /* WIFI_RX_DATA0 */ }; pinctrl_wifi_pwr_en: wifipwrengrp { fsl,pins = - <MX8MM_IOMUXC_SAI5_MCLK_GPIO3_IO25 0x184>; /* PMIC_EN_WIFI */ + <MX8MM_IOMUXC_SAI5_MCLK_GPIO3_IO25 0x6>; /* PMIC_EN_WIFI */ }; }; diff --git a/arch/arm64/boot/dts/freescale/imx8mm.dtsi b/arch/arm64/boot/dts/freescale/imx8mm.dtsi index 1ee05677c2dd..1bf070473829 100644 --- a/arch/arm64/boot/dts/freescale/imx8mm.dtsi +++ b/arch/arm64/boot/dts/freescale/imx8mm.dtsi @@ -758,7 +758,7 @@ clocks = <&clk IMX8MM_CLK_PWM1_ROOT>, <&clk IMX8MM_CLK_PWM1_ROOT>; clock-names = "ipg", "per"; - #pwm-cells = <2>; + #pwm-cells = <3>; status = "disabled"; }; @@ -769,7 +769,7 @@ clocks = <&clk IMX8MM_CLK_PWM2_ROOT>, <&clk IMX8MM_CLK_PWM2_ROOT>; clock-names = "ipg", "per"; - #pwm-cells = <2>; + #pwm-cells = <3>; status = "disabled"; }; @@ -780,7 +780,7 @@ clocks = <&clk IMX8MM_CLK_PWM3_ROOT>, <&clk IMX8MM_CLK_PWM3_ROOT>; clock-names = "ipg", "per"; - #pwm-cells = <2>; + #pwm-cells = <3>; status = "disabled"; }; @@ -791,7 +791,7 @@ clocks = <&clk IMX8MM_CLK_PWM4_ROOT>, <&clk IMX8MM_CLK_PWM4_ROOT>; clock-names = "ipg", "per"; - #pwm-cells = <2>; + #pwm-cells = <3>; status = "disabled"; }; diff --git a/arch/arm64/boot/dts/freescale/imx8mn-beacon-baseboard.dtsi b/arch/arm64/boot/dts/freescale/imx8mn-beacon-baseboard.dtsi index 0f40b43ac091..02f37dcda7ed 100644 --- a/arch/arm64/boot/dts/freescale/imx8mn-beacon-baseboard.dtsi +++ b/arch/arm64/boot/dts/freescale/imx8mn-beacon-baseboard.dtsi @@ -175,6 +175,7 @@ pinctrl-0 = <&pinctrl_uart3>; assigned-clocks = <&clk IMX8MN_CLK_UART3>; assigned-clock-parents = <&clk IMX8MN_SYS_PLL1_80M>; + uart-has-rtscts; status = "okay"; }; @@ -258,6 +259,8 @@ fsl,pins = < MX8MN_IOMUXC_ECSPI1_SCLK_UART3_DCE_RX 0x40 MX8MN_IOMUXC_ECSPI1_MOSI_UART3_DCE_TX 0x40 + MX8MN_IOMUXC_ECSPI1_MISO_UART3_DCE_CTS_B 0x40 + MX8MN_IOMUXC_ECSPI1_SS0_UART3_DCE_RTS_B 0x40 >; }; diff --git a/arch/arm64/boot/dts/freescale/imx8mn-bsh-smm-s2pro.dts b/arch/arm64/boot/dts/freescale/imx8mn-bsh-smm-s2pro.dts index c6a8ed6745c1..fbbb3367037b 100644 --- a/arch/arm64/boot/dts/freescale/imx8mn-bsh-smm-s2pro.dts +++ b/arch/arm64/boot/dts/freescale/imx8mn-bsh-smm-s2pro.dts @@ -7,6 +7,7 @@ /dts-v1/; #include "imx8mn-bsh-smm-s2-common.dtsi" +#include <dt-bindings/sound/tlv320aic31xx.h> / { model = "BSH SMM S2 PRO"; @@ -16,6 +17,65 @@ device_type = "memory"; reg = <0x0 0x40000000 0x0 0x20000000>; }; + + sound-tlv320aic31xx { + compatible = "fsl,imx-audio-tlv320aic31xx"; + model = "tlv320aic31xx-hifi"; + audio-cpu = <&sai3>; + audio-codec = <&tlv320dac3101>; + audio-asrc = <&easrc>; + audio-routing = + "Ext Spk", "SPL", + "Ext Spk", "SPR"; + mclk-id = <PLL_CLKIN_BCLK>; + }; + + vdd_input: vdd_input { + compatible = "regulator-fixed"; + regulator-name = "vdd_input"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + }; +}; + +&easrc { + fsl,asrc-rate = <48000>; + fsl,asrc-format = <10>; + status = "okay"; +}; + +&i2c2 { + clock-frequency = <400000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c2>; + status = "okay"; + + tlv320dac3101: audio-codec@18 { + compatible = "ti,tlv320dac3101"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_dac_rst>; + reg = <0x18>; + #sound-dai-cells = <0>; + HPVDD-supply = <&buck4_reg>; + SPRVDD-supply = <&vdd_input>; + SPLVDD-supply = <&vdd_input>; + AVDD-supply = <&buck4_reg>; + IOVDD-supply = <&buck4_reg>; + DVDD-supply = <&buck5_reg>; + reset-gpios = <&gpio1 6 GPIO_ACTIVE_LOW>; + ai31xx-micbias-vg = <MICBIAS_AVDDV>; + clocks = <&clk IMX8MN_CLK_SAI3_ROOT>; + }; +}; + +&sai3 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_sai3>; + assigned-clocks = <&clk IMX8MN_CLK_SAI3>; + assigned-clock-parents = <&clk IMX8MN_AUDIO_PLL1_OUT>; + assigned-clock-rates = <24576000>; + fsl,sai-mclk-direction-output; + status = "okay"; }; /* eMMC */ @@ -30,6 +90,36 @@ }; &iomuxc { + pinctrl_dac_rst: dacrstgrp { + fsl,pins = < + MX8MN_IOMUXC_GPIO1_IO06_GPIO1_IO6 0x19 /* DAC_RST */ + >; + }; + + pinctrl_espi2: espi2grp { + fsl,pins = < + MX8MN_IOMUXC_ECSPI2_SCLK_ECSPI2_SCLK 0x082 + MX8MN_IOMUXC_ECSPI2_MOSI_ECSPI2_MOSI 0x082 + MX8MN_IOMUXC_ECSPI2_MISO_ECSPI2_MISO 0x082 + MX8MN_IOMUXC_ECSPI2_SS0_ECSPI2_SS0 0x040 + >; + }; + + pinctrl_i2c2: i2c2grp { + fsl,pins = < + MX8MN_IOMUXC_I2C2_SCL_I2C2_SCL 0x400000c3 + MX8MN_IOMUXC_I2C2_SDA_I2C2_SDA 0x400000c3 + >; + }; + + pinctrl_sai3: sai3grp { + fsl,pins = < + MX8MN_IOMUXC_SAI3_TXFS_SAI3_TX_SYNC 0xd6 + MX8MN_IOMUXC_SAI3_TXC_SAI3_TX_BCLK 0xd6 + MX8MN_IOMUXC_SAI3_TXD_SAI3_TX_DATA0 0xd6 + >; + }; + pinctrl_usdhc1: usdhc1grp { fsl,pins = < MX8MN_IOMUXC_SD1_CLK_USDHC1_CLK 0x40000090 diff --git a/arch/arm64/boot/dts/freescale/imx8mn-ddr3l-evk.dts b/arch/arm64/boot/dts/freescale/imx8mn-ddr3l-evk.dts new file mode 100644 index 000000000000..000e2c0596df --- /dev/null +++ b/arch/arm64/boot/dts/freescale/imx8mn-ddr3l-evk.dts @@ -0,0 +1,114 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) + +/dts-v1/; + +#include "imx8mn.dtsi" +#include "imx8mn-evk.dtsi" +#include <dt-bindings/interrupt-controller/irq.h> + +/ { + model = "NXP i.MX8MNano DDR3L EVK board"; + compatible = "fsl,imx8mn-ddr3l-evk", "fsl,imx8mn"; +}; + +&A53_0 { + cpu-supply = <&buck1>; +}; + +&A53_1 { + cpu-supply = <&buck1>; +}; + +&A53_2 { + cpu-supply = <&buck1>; +}; + +&A53_3 { + cpu-supply = <&buck1>; +}; + +&i2c1 { + pmic: pmic@25 { + compatible = "nxp,pca9450b"; + reg = <0x25>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pmic>; + interrupt-parent = <&gpio1>; + interrupts = <3 IRQ_TYPE_LEVEL_LOW>; + + regulators { + buck1: BUCK1 { + regulator-name = "VDD_SOC_0V9"; + regulator-min-microvolt = <850000>; + regulator-max-microvolt = <950000>; + regulator-boot-on; + regulator-always-on; + regulator-ramp-delay = <3125>; + }; + + buck4: BUCK4 { + regulator-name = "VDD_3V3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-boot-on; + regulator-always-on; + }; + + buck5: BUCK5 { + regulator-name = "VDD_1V8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-boot-on; + regulator-always-on; + }; + + buck6: BUCK6 { + regulator-name = "NVCC_DRAM_1V35"; + regulator-min-microvolt = <1350000>; + regulator-max-microvolt = <1350000>; + regulator-boot-on; + regulator-always-on; + }; + + ldo1: LDO1 { + regulator-name = "NVCC_SNVS_1V8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-boot-on; + regulator-always-on; + }; + + ldo2: LDO2 { + regulator-name = "VDD_SNVS_0V8"; + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <800000>; + regulator-boot-on; + regulator-always-on; + }; + + ldo3: LDO3 { + regulator-name = "VDDA_1V8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-boot-on; + regulator-always-on; + }; + + ldo4: LDO4 { + regulator-name = "VDD_PHY_1V2"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-boot-on; + regulator-always-on; + }; + + ldo5: LDO5 { + regulator-name = "NVCC_SD2"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + regulator-boot-on; + regulator-always-on; + }; + }; + }; +}; diff --git a/arch/arm64/boot/dts/freescale/imx8mn-evk.dts b/arch/arm64/boot/dts/freescale/imx8mn-evk.dts index b4225cfcb6d9..4eb467df5ba7 100644 --- a/arch/arm64/boot/dts/freescale/imx8mn-evk.dts +++ b/arch/arm64/boot/dts/freescale/imx8mn-evk.dts @@ -41,18 +41,18 @@ regulators { buck1: BUCK1{ - regulator-name = "BUCK1"; - regulator-min-microvolt = <600000>; - regulator-max-microvolt = <2187500>; + regulator-name = "VDD_SOC"; + regulator-min-microvolt = <850000>; + regulator-max-microvolt = <950000>; regulator-boot-on; regulator-always-on; regulator-ramp-delay = <3125>; }; buck2: BUCK2 { - regulator-name = "BUCK2"; - regulator-min-microvolt = <600000>; - regulator-max-microvolt = <2187500>; + regulator-name = "VDD_ARM_0V9"; + regulator-min-microvolt = <850000>; + regulator-max-microvolt = <1000000>; regulator-boot-on; regulator-always-on; regulator-ramp-delay = <3125>; @@ -61,63 +61,63 @@ }; buck4: BUCK4{ - regulator-name = "BUCK4"; - regulator-min-microvolt = <600000>; - regulator-max-microvolt = <3400000>; + regulator-name = "VDD_3V3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; regulator-boot-on; regulator-always-on; }; buck5: BUCK5{ - regulator-name = "BUCK5"; - regulator-min-microvolt = <600000>; - regulator-max-microvolt = <3400000>; + regulator-name = "VDD_1V8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; regulator-boot-on; regulator-always-on; }; buck6: BUCK6 { - regulator-name = "BUCK6"; - regulator-min-microvolt = <600000>; - regulator-max-microvolt = <3400000>; + regulator-name = "NVCC_DRAM_1V1"; + regulator-min-microvolt = <1100000>; + regulator-max-microvolt = <1100000>; regulator-boot-on; regulator-always-on; }; ldo1: LDO1 { - regulator-name = "LDO1"; - regulator-min-microvolt = <1600000>; - regulator-max-microvolt = <3300000>; + regulator-name = "NVCC_SNVS_1V8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; regulator-boot-on; regulator-always-on; }; ldo2: LDO2 { - regulator-name = "LDO2"; + regulator-name = "VDD_SNVS_0V8"; regulator-min-microvolt = <800000>; - regulator-max-microvolt = <1150000>; + regulator-max-microvolt = <800000>; regulator-boot-on; regulator-always-on; }; ldo3: LDO3 { - regulator-name = "LDO3"; - regulator-min-microvolt = <800000>; - regulator-max-microvolt = <3300000>; + regulator-name = "VDDA_1V8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; regulator-boot-on; regulator-always-on; }; ldo4: LDO4 { - regulator-name = "LDO4"; - regulator-min-microvolt = <800000>; - regulator-max-microvolt = <3300000>; + regulator-name = "VDD_PHY_1V2"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; regulator-boot-on; regulator-always-on; }; ldo5: LDO5 { - regulator-name = "LDO5"; + regulator-name = "NVCC_SD2"; regulator-min-microvolt = <1800000>; regulator-max-microvolt = <3300000>; regulator-boot-on; diff --git a/arch/arm64/boot/dts/freescale/imx8mn-evk.dtsi b/arch/arm64/boot/dts/freescale/imx8mn-evk.dtsi index c3f15192b76c..d1f6cccfa00d 100644 --- a/arch/arm64/boot/dts/freescale/imx8mn-evk.dtsi +++ b/arch/arm64/boot/dts/freescale/imx8mn-evk.dtsi @@ -110,6 +110,22 @@ }; }; +&flexspi { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_flexspi>; + status = "okay"; + + flash0: flash@0 { + compatible = "jedec,spi-nor"; + reg = <0>; + #address-cells = <1>; + #size-cells = <1>; + spi-max-frequency = <166000000>; + spi-tx-bus-width = <4>; + spi-rx-bus-width = <4>; + }; +}; + &i2c1 { clock-frequency = <400000>; pinctrl-names = "default"; @@ -196,6 +212,15 @@ status = "okay"; }; +&uart3 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart3>; + assigned-clocks = <&clk IMX8MN_CLK_UART3>; + assigned-clock-parents = <&clk IMX8MN_SYS_PLL1_80M>; + uart-has-rtscts; + status = "okay"; +}; + &usbotg1 { dr_mode = "otg"; hnp-disable; @@ -267,6 +292,17 @@ >; }; + pinctrl_flexspi: flexspigrp { + fsl,pins = < + MX8MN_IOMUXC_NAND_ALE_QSPI_A_SCLK 0x1c2 + MX8MN_IOMUXC_NAND_CE0_B_QSPI_A_SS0_B 0x82 + MX8MN_IOMUXC_NAND_DATA00_QSPI_A_DATA0 0x82 + MX8MN_IOMUXC_NAND_DATA01_QSPI_A_DATA1 0x82 + MX8MN_IOMUXC_NAND_DATA02_QSPI_A_DATA2 0x82 + MX8MN_IOMUXC_NAND_DATA03_QSPI_A_DATA3 0x82 + >; + }; + pinctrl_gpio_led: gpioledgrp { fsl,pins = < MX8MN_IOMUXC_NAND_READY_B_GPIO3_IO16 0x19 @@ -347,6 +383,15 @@ >; }; + pinctrl_uart3: uart3grp { + fsl,pins = < + MX8MN_IOMUXC_ECSPI1_SCLK_UART3_DCE_RX 0x140 + MX8MN_IOMUXC_ECSPI1_MOSI_UART3_DCE_TX 0x140 + MX8MN_IOMUXC_ECSPI1_SS0_UART3_DCE_RTS_B 0x140 + MX8MN_IOMUXC_ECSPI1_MISO_UART3_DCE_CTS_B 0x140 + >; + }; + pinctrl_usdhc2_gpio: usdhc2gpiogrp { fsl,pins = < MX8MN_IOMUXC_GPIO1_IO15_GPIO1_IO15 0x1c4 diff --git a/arch/arm64/boot/dts/freescale/imx8mn-venice-gw7902.dts b/arch/arm64/boot/dts/freescale/imx8mn-venice-gw7902.dts index 3c0e63d2e82d..367a232675aa 100644 --- a/arch/arm64/boot/dts/freescale/imx8mn-venice-gw7902.dts +++ b/arch/arm64/boot/dts/freescale/imx8mn-venice-gw7902.dts @@ -393,6 +393,13 @@ gw,voltage-divider-ohms = <10000 10000>; }; + channel@9c { + gw,mode = <2>; + reg = <0x9c>; + label = "vdd_5p0"; + gw,voltage-divider-ohms = <10000 10000>; + }; + channel@a2 { gw,mode = <2>; reg = <0xa2>; @@ -625,6 +632,7 @@ pinctrl-0 = <&pinctrl_uart3>, <&pinctrl_uart3_gpio>; rts-gpios = <&gpio2 1 GPIO_ACTIVE_LOW>; cts-gpios = <&gpio2 0 GPIO_ACTIVE_LOW>; + uart-has-rtscts; status = "okay"; bluetooth { diff --git a/arch/arm64/boot/dts/freescale/imx8mn.dtsi b/arch/arm64/boot/dts/freescale/imx8mn.dtsi index 5c0ca2490561..e41e1d56f980 100644 --- a/arch/arm64/boot/dts/freescale/imx8mn.dtsi +++ b/arch/arm64/boot/dts/freescale/imx8mn.dtsi @@ -705,7 +705,7 @@ clocks = <&clk IMX8MN_CLK_PWM1_ROOT>, <&clk IMX8MN_CLK_PWM1_ROOT>; clock-names = "ipg", "per"; - #pwm-cells = <2>; + #pwm-cells = <3>; status = "disabled"; }; @@ -716,7 +716,7 @@ clocks = <&clk IMX8MN_CLK_PWM2_ROOT>, <&clk IMX8MN_CLK_PWM2_ROOT>; clock-names = "ipg", "per"; - #pwm-cells = <2>; + #pwm-cells = <3>; status = "disabled"; }; @@ -727,7 +727,7 @@ clocks = <&clk IMX8MN_CLK_PWM3_ROOT>, <&clk IMX8MN_CLK_PWM3_ROOT>; clock-names = "ipg", "per"; - #pwm-cells = <2>; + #pwm-cells = <3>; status = "disabled"; }; @@ -738,7 +738,7 @@ clocks = <&clk IMX8MN_CLK_PWM4_ROOT>, <&clk IMX8MN_CLK_PWM4_ROOT>; clock-names = "ipg", "per"; - #pwm-cells = <2>; + #pwm-cells = <3>; status = "disabled"; }; @@ -933,7 +933,7 @@ }; usdhc1: mmc@30b40000 { - compatible = "fsl,imx8mn-usdhc", "fsl,imx7d-usdhc"; + compatible = "fsl,imx8mn-usdhc", "fsl,imx8mm-usdhc", "fsl,imx7d-usdhc"; reg = <0x30b40000 0x10000>; interrupts = <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>; clocks = <&clk IMX8MN_CLK_IPG_ROOT>, @@ -947,7 +947,7 @@ }; usdhc2: mmc@30b50000 { - compatible = "fsl,imx8mn-usdhc", "fsl,imx7d-usdhc"; + compatible = "fsl,imx8mn-usdhc", "fsl,imx8mm-usdhc", "fsl,imx7d-usdhc"; reg = <0x30b50000 0x10000>; interrupts = <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>; clocks = <&clk IMX8MN_CLK_IPG_ROOT>, @@ -961,7 +961,7 @@ }; usdhc3: mmc@30b60000 { - compatible = "fsl,imx8mn-usdhc", "fsl,imx7d-usdhc"; + compatible = "fsl,imx8mn-usdhc", "fsl,imx8mm-usdhc", "fsl,imx7d-usdhc"; reg = <0x30b60000 0x10000>; interrupts = <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>; clocks = <&clk IMX8MN_CLK_IPG_ROOT>, diff --git a/arch/arm64/boot/dts/freescale/imx8mp-icore-mx8mp-edimm2.2.dts b/arch/arm64/boot/dts/freescale/imx8mp-icore-mx8mp-edimm2.2.dts new file mode 100644 index 000000000000..70a701a624a6 --- /dev/null +++ b/arch/arm64/boot/dts/freescale/imx8mp-icore-mx8mp-edimm2.2.dts @@ -0,0 +1,175 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright (c) 2018 NXP + * Copyright (c) 2019 Engicam srl + * Copyright (c) 2020 Amarula Solutons(India) + */ + +/dts-v1/; + +#include "imx8mp.dtsi" +#include "imx8mp-icore-mx8mp.dtsi" +#include <dt-bindings/usb/pd.h> + +/ { + model = "Engicam i.Core MX8M Plus EDIMM2.2 Starter Kit"; + compatible = "engicam,icore-mx8mp-edimm2.2", "engicam,icore-mx8mp", + "fsl,imx8mp"; + + chosen { + stdout-path = &uart2; + }; + + reg_usb1_vbus: regulator-usb1 { + compatible = "regulator-fixed"; + enable-active-high; + gpio = <&gpio1 14 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_reg_usb1>; + regulator-max-microvolt = <5000000>; + regulator-min-microvolt = <5000000>; + regulator-name = "usb1_host_vbus"; + }; + + reg_usdhc2_vmmc: regulator-usdhc2 { + compatible = "regulator-fixed"; + enable-active-high; + gpio = <&gpio2 19 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_reg_usdhc2_vmmc>; + regulator-max-microvolt = <3300000>; + regulator-min-microvolt = <3300000>; + regulator-name = "VSD_3V3"; + }; +}; + +/* Ethernet */ +&eqos { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_eqos>; + phy-handle = <ðphy0>; + phy-mode = "rgmii-id"; + status = "okay"; + + mdio { + compatible = "snps,dwmac-mdio"; + #address-cells = <1>; + #size-cells = <0>; + + ethphy0: ethernet-phy@7 { + compatible = "ethernet-phy-ieee802.3-c22"; + micrel,led-mode = <0>; + reg = <7>; + }; + }; +}; + +/* console */ +&uart2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart2>; + status = "okay"; +}; + +&usb3_phy0 { + status = "okay"; +}; + +&usb3_0 { + status = "okay"; +}; + +&usb_dwc3_0 { + dr_mode = "host"; + status = "okay"; +}; + +&usb3_phy1 { + status = "okay"; +}; + +&usb3_1 { + status = "okay"; +}; + +&usb_dwc3_1 { + dr_mode = "host"; + status = "okay"; +}; + +/* SDCARD */ +&usdhc2 { + cd-gpios = <&gpio2 12 GPIO_ACTIVE_LOW>; + bus-width = <4>; + pinctrl-names = "default" ; + pinctrl-0 = <&pinctrl_usdhc2>, <&pinctrl_usdhc2_gpio>; + vmmc-supply = <®_usdhc2_vmmc>; + status = "okay"; +}; + +&iomuxc { + pinctrl_eqos: eqosgrp { + fsl,pins = < + MX8MP_IOMUXC_ENET_MDC__ENET_QOS_MDC 0x3 + MX8MP_IOMUXC_ENET_MDIO__ENET_QOS_MDIO 0x3 + MX8MP_IOMUXC_ENET_RD0__ENET_QOS_RGMII_RD0 0x91 + MX8MP_IOMUXC_ENET_RD1__ENET_QOS_RGMII_RD1 0x91 + MX8MP_IOMUXC_ENET_RD2__ENET_QOS_RGMII_RD2 0x91 + MX8MP_IOMUXC_ENET_RD3__ENET_QOS_RGMII_RD3 0x91 + MX8MP_IOMUXC_ENET_RXC__CCM_ENET_QOS_CLOCK_GENERATE_RX_CLK 0x91 + MX8MP_IOMUXC_ENET_RX_CTL__ENET_QOS_RGMII_RX_CTL 0x91 + MX8MP_IOMUXC_ENET_TD0__ENET_QOS_RGMII_TD0 0x1f + MX8MP_IOMUXC_ENET_TD1__ENET_QOS_RGMII_TD1 0x1f + MX8MP_IOMUXC_ENET_TD2__ENET_QOS_RGMII_TD2 0x1f + MX8MP_IOMUXC_ENET_TD3__ENET_QOS_RGMII_TD3 0x1f + MX8MP_IOMUXC_ENET_TX_CTL__ENET_QOS_RGMII_TX_CTL 0x1f + MX8MP_IOMUXC_ENET_TXC__CCM_ENET_QOS_CLOCK_GENERATE_TX_CLK 0x1f + MX8MP_IOMUXC_NAND_DATA01__GPIO3_IO07 0x19 + >; + }; + + pinctrl_uart2: uart2grp { + fsl,pins = < + MX8MP_IOMUXC_UART2_RXD__UART2_DCE_RX 0x49 + MX8MP_IOMUXC_UART2_TXD__UART2_DCE_TX 0x49 + >; + }; + + pinctrl_uart3: uart3grp { + fsl,pins = < + MX8MP_IOMUXC_UART3_RXD__UART3_DCE_RX 0x140 + MX8MP_IOMUXC_UART3_TXD__UART3_DCE_TX 0x140 + MX8MP_IOMUXC_SD1_STROBE__UART3_DCE_CTS 0x140 + >; + }; + + pinctrl_usdhc2: usdhc2grp { + fsl,pins = < + MX8MP_IOMUXC_SD2_CLK__USDHC2_CLK 0x190 + MX8MP_IOMUXC_SD2_CMD__USDHC2_CMD 0x1d0 + MX8MP_IOMUXC_SD2_DATA0__USDHC2_DATA0 0x1d0 + MX8MP_IOMUXC_SD2_DATA1__USDHC2_DATA1 0x1d0 + MX8MP_IOMUXC_SD2_DATA2__USDHC2_DATA2 0x1d0 + MX8MP_IOMUXC_SD2_DATA3__USDHC2_DATA3 0x1d0 + MX8MP_IOMUXC_GPIO1_IO04__USDHC2_VSELECT 0xc1 + >; + }; + + pinctrl_usdhc2_gpio: usdhc2gpiogrp { + fsl,pins = < + MX8MP_IOMUXC_SD2_CD_B__GPIO2_IO12 0x1c4 + >; + }; + + pinctrl_reg_usb1: regusb1grp { + fsl,pins = < + MX8MP_IOMUXC_GPIO1_IO14__GPIO1_IO14 0x19 + >; + }; + + pinctrl_reg_usdhc2_vmmc: regusdhc2vmmcgrp { + fsl,pins = < + MX8MP_IOMUXC_SD2_RESET_B__GPIO2_IO19 0x41 + >; + }; +}; diff --git a/arch/arm64/boot/dts/freescale/imx8mp-icore-mx8mp.dtsi b/arch/arm64/boot/dts/freescale/imx8mp-icore-mx8mp.dtsi new file mode 100644 index 000000000000..5116079cce22 --- /dev/null +++ b/arch/arm64/boot/dts/freescale/imx8mp-icore-mx8mp.dtsi @@ -0,0 +1,186 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright (c) 2018 NXP + * Copyright (c) 2019 Engicam srl + * Copyright (c) 2020 Amarula Solutons(India) + */ + +/ { + compatible = "engicam,icore-mx8mp", "fsl,imx8mp"; +}; + +&A53_0 { + cpu-supply = <&buck2>; +}; + +&A53_1 { + cpu-supply = <&buck2>; +}; + +&A53_2 { + cpu-supply = <&buck2>; +}; + +&A53_3 { + cpu-supply = <&buck2>; +}; + +&i2c1 { + clock-frequency = <100000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c1>; + status = "okay"; + + pca9450: pmic@25 { + compatible = "nxp,pca9450c"; + interrupt-parent = <&gpio3>; + interrupts = <1 IRQ_TYPE_LEVEL_LOW>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pmic>; + reg = <0x25>; + + regulators { + buck1: BUCK1 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <720000>; + regulator-max-microvolt = <1000000>; + regulator-name = "BUCK1"; + regulator-ramp-delay = <3125>; + }; + + buck2: BUCK2 { + nxp,dvs-run-voltage = <950000>; + nxp,dvs-standby-voltage = <850000>; + regulator-always-on; + regulator-boot-on; + regulator-max-microvolt = <1025000>; + regulator-min-microvolt = <720000>; + regulator-name = "BUCK2"; + regulator-ramp-delay = <3125>; + }; + + buck4: BUCK4 { + regulator-always-on; + regulator-boot-on; + regulator-max-microvolt = <3600000>; + regulator-min-microvolt = <3000000>; + regulator-name = "BUCK4"; + }; + + buck5: BUCK5 { + regulator-always-on; + regulator-boot-on; + regulator-max-microvolt = <1950000>; + regulator-min-microvolt = <1650000>; + regulator-name = "BUCK5"; + }; + + buck6: BUCK6 { + regulator-always-on; + regulator-boot-on; + regulator-max-microvolt = <1155000>; + regulator-min-microvolt = <1045000>; + regulator-name = "BUCK6"; + }; + + ldo1: LDO1 { + regulator-always-on; + regulator-boot-on; + regulator-max-microvolt = <1950000>; + regulator-min-microvolt = <1650000>; + regulator-name = "LDO1"; + }; + + ldo3: LDO3 { + regulator-always-on; + regulator-boot-on; + regulator-max-microvolt = <1890000>; + regulator-min-microvolt = <1710000>; + regulator-name = "LDO3"; + }; + + ldo5: LDO5 { + regulator-always-on; + regulator-boot-on; + regulator-max-microvolt = <3300000>; + regulator-min-microvolt = <1800000>; + regulator-name = "LDO5"; + }; + }; + }; +}; + +/* EMMC */ +&usdhc3 { + bus-width = <8>; + non-removable; + pinctrl-names = "default", "state_100mhz", "state_200mhz"; + pinctrl-0 = <&pinctrl_usdhc3>; + pinctrl-1 = <&pinctrl_usdhc3_100mhz>; + pinctrl-2 = <&pinctrl_usdhc3_200mhz>; + status = "okay"; +}; + +&iomuxc { + pinctrl_i2c1: i2c1grp { + fsl,pins = < + MX8MP_IOMUXC_I2C1_SCL__I2C1_SCL 0x400001c3 + MX8MP_IOMUXC_I2C1_SDA__I2C1_SDA 0x400001c3 + >; + }; + + pinctrl_pmic: pmicgrp { + fsl,pins = < + MX8MP_IOMUXC_NAND_CE0_B__GPIO3_IO01 0x41 + >; + }; + + pinctrl_usdhc3: usdhc3grp { + fsl,pins = < + MX8MP_IOMUXC_NAND_WE_B__USDHC3_CLK 0x190 + MX8MP_IOMUXC_NAND_WP_B__USDHC3_CMD 0x1d0 + MX8MP_IOMUXC_NAND_DATA04__USDHC3_DATA0 0x1d0 + MX8MP_IOMUXC_NAND_DATA05__USDHC3_DATA1 0x1d0 + MX8MP_IOMUXC_NAND_DATA06__USDHC3_DATA2 0x1d0 + MX8MP_IOMUXC_NAND_DATA07__USDHC3_DATA3 0x1d0 + MX8MP_IOMUXC_NAND_RE_B__USDHC3_DATA4 0x1d0 + MX8MP_IOMUXC_NAND_CE2_B__USDHC3_DATA5 0x1d0 + MX8MP_IOMUXC_NAND_CE3_B__USDHC3_DATA6 0x1d0 + MX8MP_IOMUXC_NAND_CLE__USDHC3_DATA7 0x1d0 + MX8MP_IOMUXC_NAND_CE1_B__USDHC3_STROBE 0x190 + >; + }; + + pinctrl_usdhc3_100mhz: usdhc3-100mhzgrp { + fsl,pins = < + MX8MP_IOMUXC_NAND_WE_B__USDHC3_CLK 0x194 + MX8MP_IOMUXC_NAND_WP_B__USDHC3_CMD 0x1d4 + MX8MP_IOMUXC_NAND_DATA04__USDHC3_DATA0 0x1d4 + MX8MP_IOMUXC_NAND_DATA05__USDHC3_DATA1 0x1d4 + MX8MP_IOMUXC_NAND_DATA06__USDHC3_DATA2 0x1d4 + MX8MP_IOMUXC_NAND_DATA07__USDHC3_DATA3 0x1d4 + MX8MP_IOMUXC_NAND_RE_B__USDHC3_DATA4 0x1d4 + MX8MP_IOMUXC_NAND_CE2_B__USDHC3_DATA5 0x1d4 + MX8MP_IOMUXC_NAND_CE3_B__USDHC3_DATA6 0x1d4 + MX8MP_IOMUXC_NAND_CLE__USDHC3_DATA7 0x1d4 + MX8MP_IOMUXC_NAND_CE1_B__USDHC3_STROBE 0x194 + >; + }; + + pinctrl_usdhc3_200mhz: usdhc3-200mhzgrp { + fsl,pins = < + MX8MP_IOMUXC_NAND_WE_B__USDHC3_CLK 0x196 + MX8MP_IOMUXC_NAND_WP_B__USDHC3_CMD 0x1d6 + MX8MP_IOMUXC_NAND_DATA04__USDHC3_DATA0 0x1d6 + MX8MP_IOMUXC_NAND_DATA05__USDHC3_DATA1 0x1d6 + MX8MP_IOMUXC_NAND_DATA06__USDHC3_DATA2 0x1d6 + MX8MP_IOMUXC_NAND_DATA07__USDHC3_DATA3 0x1d6 + MX8MP_IOMUXC_NAND_RE_B__USDHC3_DATA4 0x1d6 + MX8MP_IOMUXC_NAND_CE2_B__USDHC3_DATA5 0x1d6 + MX8MP_IOMUXC_NAND_CE3_B__USDHC3_DATA6 0x1d6 + MX8MP_IOMUXC_NAND_CLE__USDHC3_DATA7 0x1d6 + MX8MP_IOMUXC_NAND_CE1_B__USDHC3_STROBE 0x196 + >; + }; +}; diff --git a/arch/arm64/boot/dts/freescale/imx8mp-venice-gw74xx.dts b/arch/arm64/boot/dts/freescale/imx8mp-venice-gw74xx.dts new file mode 100644 index 000000000000..101d31147603 --- /dev/null +++ b/arch/arm64/boot/dts/freescale/imx8mp-venice-gw74xx.dts @@ -0,0 +1,896 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright 2021 Gateworks Corporation + */ + +/dts-v1/; + +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/input/linux-event-codes.h> +#include <dt-bindings/leds/common.h> + +#include "imx8mp.dtsi" + +/ { + model = "Gateworks Venice GW74xx i.MX8MP board"; + compatible = "gateworks,imx8mp-gw74xx", "fsl,imx8mp"; + + aliases { + ethernet0 = &eqos; + ethernet1 = &fec; + ethernet2 = &lan1; + ethernet3 = &lan2; + ethernet4 = &lan3; + ethernet5 = &lan4; + ethernet6 = &lan5; + }; + + chosen { + stdout-path = &uart2; + }; + + memory@40000000 { + device_type = "memory"; + reg = <0x0 0x40000000 0 0x80000000>; + }; + + gpio-keys { + compatible = "gpio-keys"; + + key-0 { + label = "user_pb"; + gpios = <&gpio 2 GPIO_ACTIVE_LOW>; + linux,code = <BTN_0>; + }; + + key-1 { + label = "user_pb1x"; + linux,code = <BTN_1>; + interrupt-parent = <&gsc>; + interrupts = <0>; + }; + + key-2 { + label = "key_erased"; + linux,code = <BTN_2>; + interrupt-parent = <&gsc>; + interrupts = <1>; + }; + + key-3 { + label = "eeprom_wp"; + linux,code = <BTN_3>; + interrupt-parent = <&gsc>; + interrupts = <2>; + }; + + key-4 { + label = "tamper"; + linux,code = <BTN_4>; + interrupt-parent = <&gsc>; + interrupts = <5>; + }; + + key-5 { + label = "switch_hold"; + linux,code = <BTN_5>; + interrupt-parent = <&gsc>; + interrupts = <7>; + }; + }; + + led-controller { + compatible = "gpio-leds"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_gpio_leds>; + + led-0 { + function = LED_FUNCTION_HEARTBEAT; + color = <LED_COLOR_ID_GREEN>; + gpios = <&gpio2 15 GPIO_ACTIVE_HIGH>; + default-state = "on"; + linux,default-trigger = "heartbeat"; + }; + + led-1 { + function = LED_FUNCTION_STATUS; + color = <LED_COLOR_ID_RED>; + gpios = <&gpio2 16 GPIO_ACTIVE_HIGH>; + default-state = "off"; + }; + }; + + pps { + compatible = "pps-gpio"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pps>; + gpios = <&gpio1 12 GPIO_ACTIVE_HIGH>; + }; + + reg_usb2_vbus: regulator-usb2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_reg_usb2>; + compatible = "regulator-fixed"; + regulator-name = "usb_usb2_vbus"; + gpio = <&gpio1 6 GPIO_ACTIVE_HIGH>; + enable-active-high; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + }; + + reg_can2_stby: regulator-can2-stby { + compatible = "regulator-fixed"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_reg_can>; + regulator-name = "can2_stby"; + gpio = <&gpio3 19 GPIO_ACTIVE_HIGH>; + enable-active-high; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; + + reg_wifi_en: regulator-wifi-en { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_reg_wifi>; + compatible = "regulator-fixed"; + regulator-name = "wl"; + gpio = <&gpio3 9 GPIO_ACTIVE_HIGH>; + startup-delay-us = <100>; + enable-active-high; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; +}; + +/* off-board header */ +&ecspi2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_spi2>; + cs-gpios = <&gpio5 13 GPIO_ACTIVE_LOW>; + status = "okay"; +}; + +&eqos { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_eqos>; + phy-mode = "rgmii-id"; + phy-handle = <ðphy0>; + status = "okay"; + + mdio { + compatible = "snps,dwmac-mdio"; + #address-cells = <1>; + #size-cells = <0>; + + ethphy0: ethernet-phy@0 { + compatible = "ethernet-phy-ieee802.3-c22"; + reg = <0x0>; + }; + }; +}; + +&fec { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_fec>; + phy-mode = "rgmii-id"; + local-mac-address = [00 00 00 00 00 00]; + status = "okay"; + + fixed-link { + speed = <1000>; + full-duplex; + }; +}; + +&flexcan2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_flexcan2>; + xceiver-supply = <®_can2_stby>; + status = "okay"; +}; + +&gpio1 { + gpio-line-names = + "", "", "", "", "", "", "", "", + "", "", "dio0", "", "dio1", "", "", "", + "", "", "", "", "", "", "", "", + "", "", "", "", "", "", "", ""; +}; + +&gpio2 { + gpio-line-names = + "", "", "", "", "", "", "", "", + "", "", "", "", "", "", "", "", + "pcie3_wdis#", "", "", "pcie1_wdis@", "pcie2_wdis#", "", "", "", + "", "", "", "", "", "", "", ""; +}; + +&gpio3 { + gpio-line-names = + "m2_gdis#", "", "", "", "", "", "", "m2_rst#", + "", "", "", "", "", "", "", "", + "m2_off#", "", "", "", "", "", "", "", + "", "", "", "", "", "", "", ""; +}; + +&gpio4 { + gpio-line-names = + "", "", "", "", "", "", "", "", + "", "", "", "", "", "", "", "", + "", "", "", "", "m2_wdis#", "", "", "", + "", "", "", "", "", "", "", "uart_rs485"; +}; + +&gpio5 { + gpio-line-names = + "uart_half", "uart_term", "", "", "", "", "", "", + "", "", "", "", "", "", "", "", + "", "", "", "", "", "", "", "", + "", "", "", "", "", "", "", ""; +}; + +&i2c1 { + clock-frequency = <100000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c1>; + status = "okay"; + + gsc: gsc@20 { + compatible = "gw,gsc"; + reg = <0x20>; + pinctrl-0 = <&pinctrl_gsc>; + interrupt-parent = <&gpio4>; + interrupts = <20 IRQ_TYPE_EDGE_FALLING>; + interrupt-controller; + #interrupt-cells = <1>; + + adc { + compatible = "gw,gsc-adc"; + #address-cells = <1>; + #size-cells = <0>; + + channel@6 { + gw,mode = <0>; + reg = <0x06>; + label = "temp"; + }; + + channel@8 { + gw,mode = <1>; + reg = <0x08>; + label = "vdd_bat"; + }; + + channel@82 { + gw,mode = <2>; + reg = <0x82>; + label = "vdd_adc1"; + gw,voltage-divider-ohms = <10000 10000>; + }; + + channel@84 { + gw,mode = <2>; + reg = <0x84>; + label = "vdd_adc2"; + gw,voltage-divider-ohms = <10000 10000>; + }; + + channel@86 { + gw,mode = <2>; + reg = <0x86>; + label = "vdd_vin"; + gw,voltage-divider-ohms = <22100 1000>; + }; + + channel@88 { + gw,mode = <2>; + reg = <0x88>; + label = "vdd_3p3"; + gw,voltage-divider-ohms = <10000 10000>; + }; + + channel@8c { + gw,mode = <2>; + reg = <0x8c>; + label = "vdd_2p5"; + gw,voltage-divider-ohms = <10000 10000>; + }; + + channel@90 { + gw,mode = <2>; + reg = <0x90>; + label = "vdd_soc"; + }; + + channel@92 { + gw,mode = <2>; + reg = <0x92>; + label = "vdd_arm"; + }; + + channel@98 { + gw,mode = <2>; + reg = <0x98>; + label = "vdd_1p8"; + }; + + channel@9a { + gw,mode = <2>; + reg = <0x9a>; + label = "vdd_1p2"; + }; + + channel@9c { + gw,mode = <2>; + reg = <0x9c>; + label = "vdd_dram"; + }; + + channel@a2 { + gw,mode = <2>; + reg = <0xa2>; + label = "vdd_gsc"; + gw,voltage-divider-ohms = <10000 10000>; + }; + }; + }; + + gpio: gpio@23 { + compatible = "nxp,pca9555"; + reg = <0x23>; + gpio-controller; + #gpio-cells = <2>; + interrupt-parent = <&gsc>; + interrupts = <4>; + }; + + pmic@25 { + compatible = "nxp,pca9450c"; + reg = <0x25>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pmic>; + interrupt-parent = <&gpio3>; + interrupts = <7 IRQ_TYPE_LEVEL_LOW>; + + regulators { + BUCK1 { + regulator-name = "BUCK1"; + regulator-min-microvolt = <720000>; + regulator-max-microvolt = <1000000>; + regulator-boot-on; + regulator-always-on; + regulator-ramp-delay = <3125>; + }; + + BUCK2 { + regulator-name = "BUCK2"; + regulator-min-microvolt = <720000>; + regulator-max-microvolt = <1025000>; + regulator-boot-on; + regulator-always-on; + regulator-ramp-delay = <3125>; + nxp,dvs-run-voltage = <950000>; + nxp,dvs-standby-voltage = <850000>; + }; + + BUCK4 { + regulator-name = "BUCK4"; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3600000>; + regulator-boot-on; + regulator-always-on; + }; + + BUCK5 { + regulator-name = "BUCK5"; + regulator-min-microvolt = <1650000>; + regulator-max-microvolt = <1950000>; + regulator-boot-on; + regulator-always-on; + }; + + BUCK6 { + regulator-name = "BUCK6"; + regulator-min-microvolt = <1045000>; + regulator-max-microvolt = <1155000>; + regulator-boot-on; + regulator-always-on; + }; + + LDO1 { + regulator-name = "LDO1"; + regulator-min-microvolt = <1650000>; + regulator-max-microvolt = <1950000>; + regulator-boot-on; + regulator-always-on; + }; + + LDO3 { + regulator-name = "LDO3"; + regulator-min-microvolt = <1710000>; + regulator-max-microvolt = <1890000>; + regulator-boot-on; + regulator-always-on; + }; + + LDO5 { + regulator-name = "LDO5"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + regulator-boot-on; + regulator-always-on; + }; + }; + }; + + eeprom@50 { + compatible = "atmel,24c02"; + reg = <0x50>; + pagesize = <16>; + }; + + eeprom@51 { + compatible = "atmel,24c02"; + reg = <0x51>; + pagesize = <16>; + }; + + eeprom@52 { + compatible = "atmel,24c02"; + reg = <0x52>; + pagesize = <16>; + }; + + eeprom@53 { + compatible = "atmel,24c02"; + reg = <0x53>; + pagesize = <16>; + }; + + rtc@68 { + compatible = "dallas,ds1672"; + reg = <0x68>; + }; +}; + +&i2c2 { + clock-frequency = <400000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c2>; + status = "okay"; + + accelerometer@19 { + compatible = "st,lis2de12"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_accel>; + reg = <0x19>; + st,drdy-int-pin = <1>; + interrupt-parent = <&gpio1>; + interrupts = <7 IRQ_TYPE_LEVEL_LOW>; + interrupt-names = "INT1"; + }; + + switch: switch@5f { + compatible = "microchip,ksz9897"; + reg = <0x5f>; + pinctrl-0 = <&pinctrl_ksz>; + interrupt-parent = <&gpio4>; + interrupts = <29 IRQ_TYPE_EDGE_FALLING>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + lan1: port@0 { + reg = <0>; + label = "lan1"; + local-mac-address = [00 00 00 00 00 00]; + }; + + lan2: port@1 { + reg = <1>; + label = "lan2"; + local-mac-address = [00 00 00 00 00 00]; + }; + + lan3: port@2 { + reg = <2>; + label = "lan3"; + local-mac-address = [00 00 00 00 00 00]; + }; + + lan4: port@3 { + reg = <3>; + label = "lan4"; + local-mac-address = [00 00 00 00 00 00]; + }; + + lan5: port@4 { + reg = <4>; + label = "lan5"; + local-mac-address = [00 00 00 00 00 00]; + }; + + port@6 { + reg = <6>; + label = "cpu"; + ethernet = <&fec>; + phy-mode = "rgmii-id"; + + fixed-link { + speed = <1000>; + full-duplex; + }; + }; + }; + }; +}; + +/* off-board header */ +&i2c3 { + clock-frequency = <400000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c3>; + status = "okay"; +}; + +/* off-board header */ +&i2c4 { + clock-frequency = <400000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c4>; + status = "okay"; +}; + +/* GPS / off-board header */ +&uart1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart1>; + status = "okay"; +}; + +/* RS232 console */ +&uart2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart2>; + status = "okay"; +}; + +&uart4 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart4>; + status = "okay"; +}; + +/* USB1 - Type C front panel */ +&usb3_phy0 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usb1>; + status = "okay"; +}; + +&usb3_0 { + fsl,over-current-active-low; + status = "okay"; +}; + +&usb_dwc3_0 { + dr_mode = "host"; + status = "okay"; +}; + +/* USB2 - USB3.0 Hub */ +&usb3_phy1 { + vbus-supply = <®_usb2_vbus>; + status = "okay"; +}; + +&usb3_1 { + fsl,permanently-attached; + fsl,disable-port-power-control; + status = "okay"; +}; + +&usb_dwc3_1 { + dr_mode = "host"; + status = "okay"; +}; + +/* eMMC */ +&usdhc3 { + assigned-clocks = <&clk IMX8MP_CLK_USDHC3>; + assigned-clock-rates = <400000000>; + pinctrl-names = "default", "state_100mhz", "state_200mhz"; + pinctrl-0 = <&pinctrl_usdhc3>; + pinctrl-1 = <&pinctrl_usdhc3_100mhz>; + pinctrl-2 = <&pinctrl_usdhc3_200mhz>; + bus-width = <8>; + non-removable; + status = "okay"; +}; + +&wdog1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_wdog>; + fsl,ext-reset-output; + status = "okay"; +}; + +&iomuxc { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_hog>; + + pinctrl_hog: hoggrp { + fsl,pins = < + MX8MP_IOMUXC_GPIO1_IO09__GPIO1_IO09 0x40000041 /* DIO0 */ + MX8MP_IOMUXC_GPIO1_IO11__GPIO1_IO11 0x40000041 /* DIO1 */ + MX8MP_IOMUXC_NAND_DQS__GPIO3_IO14 0x40000041 /* M2SKT_OFF# */ + MX8MP_IOMUXC_SD2_DATA2__GPIO2_IO17 0x40000159 /* PCIE1_WDIS# */ + MX8MP_IOMUXC_SD2_DATA3__GPIO2_IO18 0x40000159 /* PCIE2_WDIS# */ + MX8MP_IOMUXC_SD2_CMD__GPIO2_IO14 0x40000159 /* PCIE3_WDIS# */ + MX8MP_IOMUXC_NAND_DATA00__GPIO3_IO06 0x40000041 /* M2SKT_RST# */ + MX8MP_IOMUXC_SAI1_TXD6__GPIO4_IO18 0x40000159 /* M2SKT_WDIS# */ + MX8MP_IOMUXC_NAND_ALE__GPIO3_IO00 0x40000159 /* M2SKT_GDIS# */ + MX8MP_IOMUXC_SAI3_TXD__GPIO5_IO01 0x40000104 /* UART_TERM */ + MX8MP_IOMUXC_SAI3_TXFS__GPIO4_IO31 0x40000104 /* UART_RS485 */ + MX8MP_IOMUXC_SAI3_TXC__GPIO5_IO00 0x40000104 /* UART_HALF */ + >; + }; + + pinctrl_accel: accelgrp { + fsl,pins = < + MX8MP_IOMUXC_GPIO1_IO07__GPIO1_IO07 0x159 + >; + }; + + pinctrl_eqos: eqosgrp { + fsl,pins = < + MX8MP_IOMUXC_ENET_MDC__ENET_QOS_MDC 0x3 + MX8MP_IOMUXC_ENET_MDIO__ENET_QOS_MDIO 0x3 + MX8MP_IOMUXC_ENET_RD0__ENET_QOS_RGMII_RD0 0x91 + MX8MP_IOMUXC_ENET_RD1__ENET_QOS_RGMII_RD1 0x91 + MX8MP_IOMUXC_ENET_RD2__ENET_QOS_RGMII_RD2 0x91 + MX8MP_IOMUXC_ENET_RD3__ENET_QOS_RGMII_RD3 0x91 + MX8MP_IOMUXC_ENET_RXC__CCM_ENET_QOS_CLOCK_GENERATE_RX_CLK 0x91 + MX8MP_IOMUXC_ENET_RX_CTL__ENET_QOS_RGMII_RX_CTL 0x91 + MX8MP_IOMUXC_ENET_TD0__ENET_QOS_RGMII_TD0 0x1f + MX8MP_IOMUXC_ENET_TD1__ENET_QOS_RGMII_TD1 0x1f + MX8MP_IOMUXC_ENET_TD2__ENET_QOS_RGMII_TD2 0x1f + MX8MP_IOMUXC_ENET_TD3__ENET_QOS_RGMII_TD3 0x1f + MX8MP_IOMUXC_ENET_TX_CTL__ENET_QOS_RGMII_TX_CTL 0x1f + MX8MP_IOMUXC_ENET_TXC__CCM_ENET_QOS_CLOCK_GENERATE_TX_CLK 0x1f + MX8MP_IOMUXC_SAI3_RXD__GPIO4_IO30 0x141 /* RST# */ + MX8MP_IOMUXC_SAI3_RXFS__GPIO4_IO28 0x159 /* IRQ# */ + >; + }; + + pinctrl_fec: fecgrp { + fsl,pins = < + MX8MP_IOMUXC_SAI1_RXD4__ENET1_RGMII_RD0 0x91 + MX8MP_IOMUXC_SAI1_RXD5__ENET1_RGMII_RD1 0x91 + MX8MP_IOMUXC_SAI1_RXD6__ENET1_RGMII_RD2 0x91 + MX8MP_IOMUXC_SAI1_RXD7__ENET1_RGMII_RD3 0x91 + MX8MP_IOMUXC_SAI1_TXC__ENET1_RGMII_RXC 0x91 + MX8MP_IOMUXC_SAI1_TXFS__ENET1_RGMII_RX_CTL 0x91 + MX8MP_IOMUXC_SAI1_TXD0__ENET1_RGMII_TD0 0x1f + MX8MP_IOMUXC_SAI1_TXD1__ENET1_RGMII_TD1 0x1f + MX8MP_IOMUXC_SAI1_TXD2__ENET1_RGMII_TD2 0x1f + MX8MP_IOMUXC_SAI1_TXD3__ENET1_RGMII_TD3 0x1f + MX8MP_IOMUXC_SAI1_TXD4__ENET1_RGMII_TX_CTL 0x1f + MX8MP_IOMUXC_SAI1_TXD5__ENET1_RGMII_TXC 0x1f + MX8MP_IOMUXC_SAI1_RXFS__ENET1_1588_EVENT0_IN 0x141 + MX8MP_IOMUXC_SAI1_RXC__ENET1_1588_EVENT0_OUT 0x141 + >; + }; + + pinctrl_flexcan2: flexcan2grp { + fsl,pins = < + MX8MP_IOMUXC_SAI5_RXD3__CAN2_TX 0x154 + MX8MP_IOMUXC_SAI5_MCLK__CAN2_RX 0x154 + >; + }; + + pinctrl_gsc: gscgrp { + fsl,pins = < + MX8MP_IOMUXC_SAI1_MCLK__GPIO4_IO20 0x159 + >; + }; + + pinctrl_i2c1: i2c1grp { + fsl,pins = < + MX8MP_IOMUXC_I2C1_SCL__I2C1_SCL 0x400001c3 + MX8MP_IOMUXC_I2C1_SDA__I2C1_SDA 0x400001c3 + >; + }; + + pinctrl_i2c2: i2c2grp { + fsl,pins = < + MX8MP_IOMUXC_I2C2_SCL__I2C2_SCL 0x400001c3 + MX8MP_IOMUXC_I2C2_SDA__I2C2_SDA 0x400001c3 + >; + }; + + pinctrl_i2c3: i2c3grp { + fsl,pins = < + MX8MP_IOMUXC_I2C3_SCL__I2C3_SCL 0x400001c3 + MX8MP_IOMUXC_I2C3_SDA__I2C3_SDA 0x400001c3 + >; + }; + + pinctrl_i2c4: i2c4grp { + fsl,pins = < + MX8MP_IOMUXC_I2C4_SCL__I2C4_SCL 0x400001c3 + MX8MP_IOMUXC_I2C4_SDA__I2C4_SDA 0x400001c3 + >; + }; + + pinctrl_ksz: kszgrp { + fsl,pins = < + MX8MP_IOMUXC_SAI3_RXC__GPIO4_IO29 0x159 /* IRQ# */ + MX8MP_IOMUXC_SAI3_MCLK__GPIO5_IO02 0x141 /* RST# */ + >; + }; + + pinctrl_gpio_leds: ledgrp { + fsl,pins = < + MX8MP_IOMUXC_SD2_DATA0__GPIO2_IO15 0x19 + MX8MP_IOMUXC_SD2_DATA1__GPIO2_IO16 0x19 + >; + }; + + pinctrl_pmic: pmicgrp { + fsl,pins = < + MX8MP_IOMUXC_NAND_DATA01__GPIO3_IO07 0x141 + >; + }; + + pinctrl_pps: ppsgrp { + fsl,pins = < + MX8MP_IOMUXC_GPIO1_IO12__GPIO1_IO12 0x141 + >; + }; + + pinctrl_reg_can: regcangrp { + fsl,pins = < + MX8MP_IOMUXC_SAI5_RXFS__GPIO3_IO19 0x154 + >; + }; + + pinctrl_reg_usb2: regusb2grp { + fsl,pins = < + MX8MP_IOMUXC_GPIO1_IO06__GPIO1_IO06 0x141 + >; + }; + + pinctrl_reg_wifi: regwifigrp { + fsl,pins = < + MX8MP_IOMUXC_NAND_DATA03__GPIO3_IO09 0x119 + >; + }; + + pinctrl_sai2: sai2grp { + fsl,pins = < + MX8MP_IOMUXC_SAI2_TXFS__AUDIOMIX_SAI2_TX_SYNC + MX8MP_IOMUXC_SAI2_TXD0__AUDIOMIX_SAI2_TX_DATA00 + MX8MP_IOMUXC_SAI2_TXC__AUDIOMIX_SAI2_TX_BCLK + MX8MP_IOMUXC_SAI2_MCLK__AUDIOMIX_SAI2_MCLK + >; + }; + + pinctrl_spi2: spi2grp { + fsl,pins = < + MX8MP_IOMUXC_ECSPI2_SCLK__ECSPI2_SCLK 0x82 + MX8MP_IOMUXC_ECSPI2_MOSI__ECSPI2_MOSI 0x82 + MX8MP_IOMUXC_ECSPI2_MISO__ECSPI2_MISO 0x82 + MX8MP_IOMUXC_ECSPI2_SS0__GPIO5_IO13 0x140 + >; + }; + + pinctrl_uart1: uart1grp { + fsl,pins = < + MX8MP_IOMUXC_UART1_RXD__UART1_DCE_RX 0x140 + MX8MP_IOMUXC_UART1_TXD__UART1_DCE_TX 0x140 + >; + }; + + pinctrl_uart2: uart2grp { + fsl,pins = < + MX8MP_IOMUXC_UART2_RXD__UART2_DCE_RX 0x140 + MX8MP_IOMUXC_UART2_TXD__UART2_DCE_TX 0x140 + >; + }; + + pinctrl_uart3: uart3grp { + fsl,pins = < + MX8MP_IOMUXC_UART3_RXD__UART3_DCE_RX 0x140 + MX8MP_IOMUXC_UART3_TXD__UART3_DCE_TX 0x140 + MX8MP_IOMUXC_SAI5_RXD0__GPIO3_IO21 0x140 + MX8MP_IOMUXC_SAI5_RXD1__GPIO3_IO22 0x140 + >; + }; + + pinctrl_uart3_gpio: uart3gpiogrp { + fsl,pins = < + MX8MP_IOMUXC_NAND_DATA02__GPIO3_IO08 0x119 + >; + }; + + pinctrl_uart4: uart4grp { + fsl,pins = < + MX8MP_IOMUXC_UART4_RXD__UART4_DCE_RX 0x140 + MX8MP_IOMUXC_UART4_TXD__UART4_DCE_TX 0x140 + >; + }; + + pinctrl_usb1: usb1grp { + fsl,pins = < + MX8MP_IOMUXC_GPIO1_IO13__USB1_OTG_OC 0x140 + MX8MP_IOMUXC_GPIO1_IO10__USB1_OTG_ID 0x140 + >; + }; + + pinctrl_usdhc1: usdhc1grp { + fsl,pins = < + MX8MP_IOMUXC_SD1_CLK__USDHC1_CLK 0x190 + MX8MP_IOMUXC_SD1_CMD__USDHC1_CMD 0x1d0 + MX8MP_IOMUXC_SD1_DATA0__USDHC1_DATA0 0x1d0 + MX8MP_IOMUXC_SD1_DATA1__USDHC1_DATA1 0x1d0 + MX8MP_IOMUXC_SD1_DATA2__USDHC1_DATA2 0x1d0 + MX8MP_IOMUXC_SD1_DATA3__USDHC1_DATA3 0x1d0 + >; + }; + + pinctrl_usdhc3: usdhc3grp { + fsl,pins = < + MX8MP_IOMUXC_NAND_WE_B__USDHC3_CLK 0x190 + MX8MP_IOMUXC_NAND_WP_B__USDHC3_CMD 0x1d0 + MX8MP_IOMUXC_NAND_DATA04__USDHC3_DATA0 0x1d0 + MX8MP_IOMUXC_NAND_DATA05__USDHC3_DATA1 0x1d0 + MX8MP_IOMUXC_NAND_DATA06__USDHC3_DATA2 0x1d0 + MX8MP_IOMUXC_NAND_DATA07__USDHC3_DATA3 0x1d0 + MX8MP_IOMUXC_NAND_RE_B__USDHC3_DATA4 0x1d0 + MX8MP_IOMUXC_NAND_CE2_B__USDHC3_DATA5 0x1d0 + MX8MP_IOMUXC_NAND_CE3_B__USDHC3_DATA6 0x1d0 + MX8MP_IOMUXC_NAND_CLE__USDHC3_DATA7 0x1d0 + MX8MP_IOMUXC_NAND_CE1_B__USDHC3_STROBE 0x190 + >; + }; + + pinctrl_usdhc3_100mhz: usdhc3-100mhzgrp { + fsl,pins = < + MX8MP_IOMUXC_NAND_WE_B__USDHC3_CLK 0x194 + MX8MP_IOMUXC_NAND_WP_B__USDHC3_CMD 0x1d4 + MX8MP_IOMUXC_NAND_DATA04__USDHC3_DATA0 0x1d4 + MX8MP_IOMUXC_NAND_DATA05__USDHC3_DATA1 0x1d4 + MX8MP_IOMUXC_NAND_DATA06__USDHC3_DATA2 0x1d4 + MX8MP_IOMUXC_NAND_DATA07__USDHC3_DATA3 0x1d4 + MX8MP_IOMUXC_NAND_RE_B__USDHC3_DATA4 0x1d4 + MX8MP_IOMUXC_NAND_CE2_B__USDHC3_DATA5 0x1d4 + MX8MP_IOMUXC_NAND_CE3_B__USDHC3_DATA6 0x1d4 + MX8MP_IOMUXC_NAND_CLE__USDHC3_DATA7 0x1d4 + MX8MP_IOMUXC_NAND_CE1_B__USDHC3_STROBE 0x194 + >; + }; + + pinctrl_usdhc3_200mhz: usdhc3-200mhzgrp { + fsl,pins = < + MX8MP_IOMUXC_NAND_WE_B__USDHC3_CLK 0x196 + MX8MP_IOMUXC_NAND_WP_B__USDHC3_CMD 0x1d6 + MX8MP_IOMUXC_NAND_DATA04__USDHC3_DATA0 0x1d6 + MX8MP_IOMUXC_NAND_DATA05__USDHC3_DATA1 0x1d6 + MX8MP_IOMUXC_NAND_DATA06__USDHC3_DATA2 0x1d6 + MX8MP_IOMUXC_NAND_DATA07__USDHC3_DATA3 0x1d6 + MX8MP_IOMUXC_NAND_RE_B__USDHC3_DATA4 0x1d6 + MX8MP_IOMUXC_NAND_CE2_B__USDHC3_DATA5 0x1d6 + MX8MP_IOMUXC_NAND_CE3_B__USDHC3_DATA6 0x1d6 + MX8MP_IOMUXC_NAND_CLE__USDHC3_DATA7 0x1d6 + MX8MP_IOMUXC_NAND_CE1_B__USDHC3_STROBE 0x196 + >; + }; + + pinctrl_wdog: wdoggrp { + fsl,pins = < + MX8MP_IOMUXC_GPIO1_IO02__WDOG1_WDOG_B 0x166 + >; + }; +}; diff --git a/arch/arm64/boot/dts/freescale/imx8mp-verdin-dahlia.dtsi b/arch/arm64/boot/dts/freescale/imx8mp-verdin-dahlia.dtsi new file mode 100644 index 000000000000..4b8f86f63081 --- /dev/null +++ b/arch/arm64/boot/dts/freescale/imx8mp-verdin-dahlia.dtsi @@ -0,0 +1,129 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT +/* + * Copyright 2022 Toradex + */ + +/* TODO: Audio Codec */ + +&backlight { + power-supply = <®_3p3v>; +}; + +/* Verdin SPI_1 */ +&ecspi1 { + status = "okay"; +}; + +/* EEPROM on display adapter boards */ +&eeprom_display_adapter { + status = "okay"; +}; + +/* EEPROM on Verdin Development board */ +&eeprom_carrier_board { + status = "okay"; +}; + +&eqos { + status = "okay"; +}; + +&flexcan1 { + status = "okay"; +}; + +&flexcan2 { + status = "okay"; +}; + +/* Verdin QSPI_1 */ +&flexspi { + status = "okay"; +}; + +/* Current measurement into module VCC */ +&hwmon { + status = "okay"; +}; + +&hwmon_temp { + vs-supply = <®_1p8v>; + status = "okay"; +}; + +/* Verdin I2C_2_DSI */ +&i2c2 { + status = "okay"; +}; + +&i2c3 { + status = "okay"; +}; + +/* Verdin I2C_1 */ +&i2c4 { + status = "okay"; + + /* TODO: Audio Codec */ +}; + +/* TODO: Verdin PCIE_1 */ + +/* Verdin PWM_1 */ +&pwm1 { + status = "okay"; +}; + +/* Verdin PWM_2 */ +&pwm2 { + status = "okay"; +}; + +/* Verdin PWM_3_DSI */ +&pwm3 { + status = "okay"; +}; + +®_usdhc2_vmmc { + vin-supply = <®_3p3v>; +}; + +/* TODO: Verdin I2S_1 */ + +/* Verdin UART_1 */ +&uart1 { + status = "okay"; +}; + +/* Verdin UART_2 */ +&uart2 { + status = "okay"; +}; + +/* Verdin UART_3, used as the Linux Console */ +&uart3 { + status = "okay"; +}; + +/* Verdin USB_1 */ +&usb3_0 { + status = "okay"; +}; + +&usb3_phy0 { + status = "okay"; +}; + +/* Verdin USB_2 */ +&usb3_1 { + status = "okay"; +}; + +&usb3_phy1 { + status = "okay"; +}; + +/* Verdin SD_1 */ +&usdhc2 { + status = "okay"; +}; diff --git a/arch/arm64/boot/dts/freescale/imx8mp-verdin-dev.dtsi b/arch/arm64/boot/dts/freescale/imx8mp-verdin-dev.dtsi new file mode 100644 index 000000000000..cefabe65b252 --- /dev/null +++ b/arch/arm64/boot/dts/freescale/imx8mp-verdin-dev.dtsi @@ -0,0 +1,46 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT +/* + * Copyright 2022 Toradex + */ + +#include "imx8mp-verdin-dahlia.dtsi" + +/ { + /* TODO: Audio Codec */ + + reg_eth2phy: regulator-eth2phy { + compatible = "regulator-fixed"; + enable-active-high; + gpio = <&gpio_expander_21 4 GPIO_ACTIVE_HIGH>; /* ETH_PWR_EN */ + off-on-delay = <500000>; + regulator-max-microvolt = <3300000>; + regulator-min-microvolt = <3300000>; + regulator-name = "+V3.3_ETH"; + startup-delay-us = <200000>; + vin-supply = <®_3p3v>; + }; +}; + +&fec { + phy-supply = <®_eth2phy>; + status = "okay"; +}; + +&gpio_expander_21 { + status = "okay"; + vcc-supply = <®_1p8v>; +}; + +/* TODO: Verdin I2C_1 with Audio Codec */ + +/* Verdin UART_1, connector X50 through RS485 transceiver */ +&uart1 { + linux,rs485-enabled-at-boot-time; + rs485-rts-active-low; + rs485-rx-during-tx; +}; + +/* Limit frequency on dev board due to long traces and bad signal integrity */ +&usdhc2 { + max-frequency = <100000000>; +}; diff --git a/arch/arm64/boot/dts/freescale/imx8mp-verdin-nonwifi-dahlia.dts b/arch/arm64/boot/dts/freescale/imx8mp-verdin-nonwifi-dahlia.dts new file mode 100644 index 000000000000..68147b0c1b35 --- /dev/null +++ b/arch/arm64/boot/dts/freescale/imx8mp-verdin-nonwifi-dahlia.dts @@ -0,0 +1,18 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT +/* + * Copyright 2022 Toradex + */ + +/dts-v1/; + +#include "imx8mp-verdin.dtsi" +#include "imx8mp-verdin-nonwifi.dtsi" +#include "imx8mp-verdin-dahlia.dtsi" + +/ { + model = "Toradex Verdin iMX8M Plus on Dahlia Board"; + compatible = "toradex,verdin-imx8mp-nonwifi-dahlia", + "toradex,verdin-imx8mp-nonwifi", + "toradex,verdin-imx8mp", + "fsl,imx8mp"; +}; diff --git a/arch/arm64/boot/dts/freescale/imx8mp-verdin-nonwifi-dev.dts b/arch/arm64/boot/dts/freescale/imx8mp-verdin-nonwifi-dev.dts new file mode 100644 index 000000000000..879ff687cf2b --- /dev/null +++ b/arch/arm64/boot/dts/freescale/imx8mp-verdin-nonwifi-dev.dts @@ -0,0 +1,18 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT +/* + * Copyright 2022 Toradex + */ + +/dts-v1/; + +#include "imx8mp-verdin.dtsi" +#include "imx8mp-verdin-nonwifi.dtsi" +#include "imx8mp-verdin-dev.dtsi" + +/ { + model = "Toradex Verdin iMX8M Plus on Verdin Development Board"; + compatible = "toradex,verdin-imx8mp-nonwifi-dev", + "toradex,verdin-imx8mp-nonwifi", + "toradex,verdin-imx8mp", + "fsl,imx8mp"; +}; diff --git a/arch/arm64/boot/dts/freescale/imx8mp-verdin-nonwifi.dtsi b/arch/arm64/boot/dts/freescale/imx8mp-verdin-nonwifi.dtsi new file mode 100644 index 000000000000..91d597391b7c --- /dev/null +++ b/arch/arm64/boot/dts/freescale/imx8mp-verdin-nonwifi.dtsi @@ -0,0 +1,54 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT +/* + * Copyright 2022 Toradex + */ + +&gpio5 { + gpio-line-names = "SODIMM_42", + "SODIMM_46", + "SODIMM_187", + "SODIMM_20", + "SODIMM_22", + "SODIMM_15", + "SODIMM_196", + "SODIMM_200", + "SODIMM_198", + "SODIMM_202", + "SODIMM_164", + "SODIMM_152", + "SODIMM_116", + "SODIMM_128", + "", + "", + "SODIMM_55", + "SODIMM_53", + "SODIMM_95", + "SODIMM_93", + "SODIMM_14", + "SODIMM_12", + "SODIMM_129", + "SODIMM_131", + "SODIMM_137", + "SODIMM_139", + "SODIMM_147", + "SODIMM_149", + "SODIMM_151", + "SODIMM_153"; +}; + +&iomuxc { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_gpio1>, <&pinctrl_gpio2>, + <&pinctrl_gpio3>, <&pinctrl_gpio4>, + <&pinctrl_gpio7>, <&pinctrl_gpio8>, + <&pinctrl_gpio_hog1>, <&pinctrl_gpio_hog2>, <&pinctrl_gpio_hog3>, + <&pinctrl_hdmi_hog>; +}; + +/* + * Verdin UART_4 + * Often used by the M7 and then should not be enabled here. + */ +&uart4 { + status = "disabled"; +}; diff --git a/arch/arm64/boot/dts/freescale/imx8mp-verdin-wifi-dahlia.dts b/arch/arm64/boot/dts/freescale/imx8mp-verdin-wifi-dahlia.dts new file mode 100644 index 000000000000..804567f6ccee --- /dev/null +++ b/arch/arm64/boot/dts/freescale/imx8mp-verdin-wifi-dahlia.dts @@ -0,0 +1,18 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT +/* + * Copyright 2022 Toradex + */ + +/dts-v1/; + +#include "imx8mp-verdin.dtsi" +#include "imx8mp-verdin-wifi.dtsi" +#include "imx8mp-verdin-dahlia.dtsi" + +/ { + model = "Toradex Verdin iMX8M Plus WB on Dahlia Board"; + compatible = "toradex,verdin-imx8mp-wifi-dahlia", + "toradex,verdin-imx8mp-wifi", + "toradex,verdin-imx8mp", + "fsl,imx8mp"; +}; diff --git a/arch/arm64/boot/dts/freescale/imx8mp-verdin-wifi-dev.dts b/arch/arm64/boot/dts/freescale/imx8mp-verdin-wifi-dev.dts new file mode 100644 index 000000000000..c1713c28cdce --- /dev/null +++ b/arch/arm64/boot/dts/freescale/imx8mp-verdin-wifi-dev.dts @@ -0,0 +1,18 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT +/* + * Copyright 2022 Toradex + */ + +/dts-v1/; + +#include "imx8mp-verdin.dtsi" +#include "imx8mp-verdin-wifi.dtsi" +#include "imx8mp-verdin-dev.dtsi" + +/ { + model = "Toradex Verdin iMX8M Plus WB on Verdin Development Board"; + compatible = "toradex,verdin-imx8mp-wifi-dev", + "toradex,verdin-imx8mp-wifi", + "toradex,verdin-imx8mp", + "fsl,imx8mp"; +}; diff --git a/arch/arm64/boot/dts/freescale/imx8mp-verdin-wifi.dtsi b/arch/arm64/boot/dts/freescale/imx8mp-verdin-wifi.dtsi new file mode 100644 index 000000000000..36289c175e6e --- /dev/null +++ b/arch/arm64/boot/dts/freescale/imx8mp-verdin-wifi.dtsi @@ -0,0 +1,82 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT +/* + * Copyright 2022 Toradex + */ + +/ { + reg_wifi_en: regulator-wifi-en { + compatible = "regulator-fixed"; + enable-active-high; + gpio = <&gpio2 11 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_wifi_pwr_en>; + regulator-max-microvolt = <3300000>; + regulator-min-microvolt = <3300000>; + regulator-name = "PDn_AW-CM276NF"; + startup-delay-us = <2000>; + }; +}; + +&gpio5 { + gpio-line-names = "SODIMM_42", + "SODIMM_46", + "SODIMM_187", + "SODIMM_20", + "SODIMM_22", + "SODIMM_15", + "SODIMM_196", + "SODIMM_200", + "SODIMM_198", + "SODIMM_202", + "", + "", + "", + "", + "", + "", + "SODIMM_55", + "SODIMM_53", + "SODIMM_95", + "SODIMM_93", + "SODIMM_14", + "SODIMM_12", + "SODIMM_129", + "SODIMM_131", + "SODIMM_137", + "SODIMM_139", + "SODIMM_147", + "SODIMM_149", + "SODIMM_151", + "SODIMM_153"; +}; + +&iomuxc { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_gpio1>, <&pinctrl_gpio2>, + <&pinctrl_gpio3>, <&pinctrl_gpio4>, + <&pinctrl_gpio7>, <&pinctrl_gpio8>, + <&pinctrl_gpio_hog2>, <&pinctrl_gpio_hog3>, <&pinctrl_gpio_hog4>, + <&pinctrl_hdmi_hog>; +}; + +/* On-module Bluetooth */ +&uart4 { + uart-has-rtscts; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_bt_uart>; + status = "okay"; +}; + +/* On-module Wi-Fi */ +&usdhc1 { + bus-width = <4>; + keep-power-in-suspend; + max-frequency = <100000000>; + non-removable; + pinctrl-names = "default", "state_100mhz", "state_200mhz"; + pinctrl-0 = <&pinctrl_usdhc1>, <&pinctrl_wifi_ctrl>; + pinctrl-1 = <&pinctrl_usdhc1_100mhz>, <&pinctrl_wifi_ctrl>; + pinctrl-2 = <&pinctrl_usdhc1_200mhz>, <&pinctrl_wifi_ctrl>; + vmmc-supply = <®_wifi_en>; + status = "okay"; +}; diff --git a/arch/arm64/boot/dts/freescale/imx8mp-verdin.dtsi b/arch/arm64/boot/dts/freescale/imx8mp-verdin.dtsi new file mode 100644 index 000000000000..fb17e329cd37 --- /dev/null +++ b/arch/arm64/boot/dts/freescale/imx8mp-verdin.dtsi @@ -0,0 +1,1380 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT +/* + * Copyright 2022 Toradex + */ + +#include "dt-bindings/pwm/pwm.h" +#include "imx8mp.dtsi" + +/ { + chosen { + stdout-path = &uart3; + }; + + aliases { + /* Ethernet aliases to ensure correct MAC addresses */ + ethernet0 = &eqos; + ethernet1 = &fec; + rtc0 = &rtc_i2c; + rtc1 = &snvs_rtc; + }; + + backlight: backlight { + compatible = "pwm-backlight"; + brightness-levels = <0 45 63 88 119 158 203 255>; + default-brightness-level = <4>; + /* Verdin I2S_2_D_OUT (DSI_1_BKL_EN/DSI_1_BKL_EN_LVDS, SODIMM 46) */ + enable-gpios = <&gpio5 1 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2s_2_d_out_dsi_1_bkl_en>; + power-supply = <®_3p3v>; + /* Verdin PWM_3_DSI/PWM_3_DSI_LVDS (SODIMM 19) */ + pwms = <&pwm3 0 6666667 PWM_POLARITY_INVERTED>; + status = "disabled"; + }; + + backlight_mezzanine: backlight-mezzanine { + compatible = "pwm-backlight"; + brightness-levels = <0 45 63 88 119 158 203 255>; + default-brightness-level = <4>; + /* Verdin GPIO 4 (SODIMM 212) */ + enable-gpios = <&gpio1 6 GPIO_ACTIVE_HIGH>; + /* Verdin PWM_2 (SODIMM 16) */ + pwms = <&pwm2 0 6666667 PWM_POLARITY_INVERTED>; + status = "disabled"; + }; + + gpio-keys { + compatible = "gpio-keys"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_gpio_keys>; + + wakeup { + debounce-interval = <10>; + /* Verdin CTRL_WAKE1_MICO# (SODIMM 252) */ + gpios = <&gpio4 0 GPIO_ACTIVE_LOW>; + label = "Wake-Up"; + linux,code = <KEY_WAKEUP>; + wakeup-source; + }; + }; + + /* Carrier Board Supplies */ + reg_1p8v: regulator-1p8v { + compatible = "regulator-fixed"; + regulator-max-microvolt = <1800000>; + regulator-min-microvolt = <1800000>; + regulator-name = "+V1.8_SW"; + }; + + reg_3p3v: regulator-3p3v { + compatible = "regulator-fixed"; + regulator-max-microvolt = <3300000>; + regulator-min-microvolt = <3300000>; + regulator-name = "+V3.3_SW"; + }; + + reg_5p0v: regulator-5p0v { + compatible = "regulator-fixed"; + regulator-max-microvolt = <5000000>; + regulator-min-microvolt = <5000000>; + regulator-name = "+V5_SW"; + }; + + /* Non PMIC On-module Supplies */ + reg_module_eth1phy: regulator-module-eth1phy { + compatible = "regulator-fixed"; + enable-active-high; + gpio = <&gpio2 20 GPIO_ACTIVE_HIGH>; /* PMIC_EN_ETH */ + off-on-delay = <500000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_reg_eth>; + regulator-always-on; + regulator-boot-on; + regulator-max-microvolt = <3300000>; + regulator-min-microvolt = <3300000>; + regulator-name = "On-module +V3.3_ETH"; + startup-delay-us = <200000>; + vin-supply = <®_vdd_3v3>; + }; + + reg_usb1_vbus: regulator-usb1-vbus { + compatible = "regulator-fixed"; + enable-active-high; + /* Verdin USB_1_EN (SODIMM 155) */ + gpio = <&gpio1 12 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usb1_vbus>; + regulator-max-microvolt = <5000000>; + regulator-min-microvolt = <5000000>; + regulator-name = "USB_1_EN"; + }; + + reg_usb2_vbus: regulator-usb2-vbus { + compatible = "regulator-fixed"; + enable-active-high; + /* Verdin USB_2_EN (SODIMM 185) */ + gpio = <&gpio1 14 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usb2_vbus>; + regulator-max-microvolt = <5000000>; + regulator-min-microvolt = <5000000>; + regulator-name = "USB_2_EN"; + }; + + reg_usdhc2_vmmc: regulator-usdhc2 { + compatible = "regulator-fixed"; + enable-active-high; + /* Verdin SD_1_PWR_EN (SODIMM 76) */ + gpio = <&gpio4 22 GPIO_ACTIVE_HIGH>; + off-on-delay = <100000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usdhc2_pwr_en>; + regulator-max-microvolt = <3300000>; + regulator-min-microvolt = <3300000>; + regulator-name = "+V3.3_SD"; + startup-delay-us = <2000>; + }; + + reserved-memory { + #address-cells = <2>; + #size-cells = <2>; + ranges; + + /* Use the kernel configuration settings instead */ + /delete-node/ linux,cma; + }; +}; + +/* Verdin SPI_1 */ +&ecspi1 { + #address-cells = <1>; + #size-cells = <0>; + cs-gpios = <&gpio5 9 GPIO_ACTIVE_LOW>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_ecspi1>; +}; + +/* Verdin ETH_1 (On-module PHY) */ +&eqos { + phy-handle = <ðphy0>; + phy-mode = "rgmii-id"; + phy-supply = <®_module_eth1phy>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_eqos>; + snps,force_thresh_dma_mode; + snps,mtl-rx-config = <&mtl_rx_setup>; + snps,mtl-tx-config = <&mtl_tx_setup>; + + mdio { + compatible = "snps,dwmac-mdio"; + #address-cells = <1>; + #size-cells = <0>; + + ethphy0: ethernet-phy@7 { + compatible = "ethernet-phy-ieee802.3-c22"; + eee-broken-100tx; + eee-broken-1000t; + interrupt-parent = <&gpio1>; + interrupts = <10 IRQ_TYPE_LEVEL_LOW>; + micrel,led-mode = <0>; + reg = <7>; + }; + }; + + mtl_rx_setup: rx-queues-config { + snps,rx-queues-to-use = <5>; + snps,rx-sched-sp; + + queue0 { + snps,dcb-algorithm; + snps,priority = <0x1>; + snps,map-to-dma-channel = <0>; + }; + + queue1 { + snps,dcb-algorithm; + snps,priority = <0x2>; + snps,map-to-dma-channel = <1>; + }; + + queue2 { + snps,dcb-algorithm; + snps,priority = <0x4>; + snps,map-to-dma-channel = <2>; + }; + + queue3 { + snps,dcb-algorithm; + snps,priority = <0x8>; + snps,map-to-dma-channel = <3>; + }; + + queue4 { + snps,dcb-algorithm; + snps,priority = <0xf0>; + snps,map-to-dma-channel = <4>; + }; + }; + + mtl_tx_setup: tx-queues-config { + snps,tx-queues-to-use = <5>; + snps,tx-sched-sp; + + queue0 { + snps,dcb-algorithm; + snps,priority = <0x1>; + }; + + queue1 { + snps,dcb-algorithm; + snps,priority = <0x2>; + }; + + queue2 { + snps,dcb-algorithm; + snps,priority = <0x4>; + }; + + queue3 { + snps,dcb-algorithm; + snps,priority = <0x8>; + }; + + queue4 { + snps,dcb-algorithm; + snps,priority = <0xf0>; + }; + }; +}; + +/* Verdin ETH_2_RGMII */ +&fec { + fsl,magic-packet; + phy-handle = <ðphy1>; + phy-mode = "rgmii-id"; + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&pinctrl_fec>; + pinctrl-1 = <&pinctrl_fec_sleep>; + + mdio { + #address-cells = <1>; + #size-cells = <0>; + + ethphy1: ethernet-phy@7 { + compatible = "ethernet-phy-ieee802.3-c22"; + interrupt-parent = <&gpio4>; + interrupts = <18 IRQ_TYPE_LEVEL_LOW>; + micrel,led-mode = <0>; + reg = <7>; + }; + }; +}; + +/* Verdin CAN_1 */ +&flexcan1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_flexcan1>; + status = "disabled"; +}; + + +/* Verdin CAN_2 */ +&flexcan2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_flexcan2>; + status = "disabled"; +}; + +/* Verdin QSPI_1 */ +&flexspi { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_flexspi0>; +}; + +&gpio1 { + gpio-line-names = "SODIMM_206", + "SODIMM_208", + "", + "", + "", + "SODIMM_210", + "SODIMM_212", + "SODIMM_216", + "SODIMM_218", + "", + "", + "SODIMM_16", + "SODIMM_155", + "SODIMM_157", + "SODIMM_185", + "SODIMM_91"; +}; + +&gpio2 { + gpio-line-names = "", + "", + "", + "", + "", + "", + "SODIMM_143", + "SODIMM_141", + "", + "", + "SODIMM_161", + "", + "SODIMM_84", + "SODIMM_78", + "SODIMM_74", + "SODIMM_80", + "SODIMM_82", + "SODIMM_70", + "SODIMM_72"; + + ctrl-sleep-moci-hog { + gpio-hog; + /* Verdin CTRL_SLEEP_MOCI# (SODIMM 256) */ + gpios = <29 GPIO_ACTIVE_HIGH>; + line-name = "CTRL_SLEEP_MOCI#"; + output-high; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_ctrl_sleep_moci>; + }; +}; + +&gpio3 { + gpio-line-names = "SODIMM_52", + "SODIMM_54", + "", + "", + "", + "", + "SODIMM_56", + "SODIMM_58", + "SODIMM_60", + "SODIMM_62", + "", + "", + "", + "", + "SODIMM_66", + "", + "SODIMM_64", + "", + "", + "SODIMM_34", + "SODIMM_19", + "", + "SODIMM_32", + "", + "", + "SODIMM_30", + "SODIMM_59", + "SODIMM_57", + "SODIMM_63", + "SODIMM_61"; +}; + +&gpio4 { + gpio-line-names = "SODIMM_252", + "SODIMM_222", + "SODIMM_36", + "SODIMM_220", + "SODIMM_193", + "SODIMM_191", + "SODIMM_201", + "SODIMM_203", + "SODIMM_205", + "SODIMM_207", + "SODIMM_199", + "SODIMM_197", + "SODIMM_221", + "SODIMM_219", + "SODIMM_217", + "SODIMM_215", + "SODIMM_211", + "SODIMM_213", + "SODIMM_189", + "SODIMM_244", + "SODIMM_38", + "", + "SODIMM_76", + "SODIMM_135", + "SODIMM_133", + "SODIMM_17", + "SODIMM_24", + "SODIMM_26", + "SODIMM_21", + "SODIMM_256", + "SODIMM_48", + "SODIMM_44"; +}; + +/* On-module I2C */ +&i2c1 { + clock-frequency = <400000>; + pinctrl-names = "default", "gpio"; + pinctrl-0 = <&pinctrl_i2c1>; + pinctrl-1 = <&pinctrl_i2c1_gpio>; + scl-gpios = <&gpio5 14 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; + sda-gpios = <&gpio5 15 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; + status = "okay"; + + pca9450: pmic@25 { + compatible = "nxp,pca9450c"; + interrupt-parent = <&gpio1>; + /* PMIC PCA9450 PMIC_nINT GPIO1_IO3 */ + interrupts = <3 IRQ_TYPE_LEVEL_LOW>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pmic>; + reg = <0x25>; + sd-vsel-gpios = <&gpio1 4 GPIO_ACTIVE_HIGH>; + + /* + * The bootloader is expected to switch on LDO4 for the on-module +V3.3_ADC and the + * I2C level shifter for the TLA2024 ADC behind this PMIC. + */ + + regulators { + BUCK1 { + regulator-always-on; + regulator-boot-on; + regulator-max-microvolt = <1000000>; + regulator-min-microvolt = <720000>; + regulator-name = "On-module +VDD_SOC (BUCK1)"; + regulator-ramp-delay = <3125>; + }; + + BUCK2 { + nxp,dvs-run-voltage = <950000>; + nxp,dvs-standby-voltage = <850000>; + regulator-always-on; + regulator-boot-on; + regulator-max-microvolt = <1025000>; + regulator-min-microvolt = <720000>; + regulator-name = "On-module +VDD_ARM (BUCK2)"; + regulator-ramp-delay = <3125>; + }; + + reg_vdd_3v3: BUCK4 { + regulator-always-on; + regulator-boot-on; + regulator-max-microvolt = <3300000>; + regulator-min-microvolt = <3300000>; + regulator-name = "On-module +V3.3 (BUCK4)"; + }; + + reg_vdd_1v8: BUCK5 { + regulator-always-on; + regulator-boot-on; + regulator-max-microvolt = <1800000>; + regulator-min-microvolt = <1800000>; + regulator-name = "PWR_1V8_MOCI (BUCK5)"; + }; + + BUCK6 { + regulator-always-on; + regulator-boot-on; + regulator-max-microvolt = <1155000>; + regulator-min-microvolt = <1045000>; + regulator-name = "On-module +VDD_DDR (BUCK6)"; + }; + + LDO1 { + regulator-always-on; + regulator-boot-on; + regulator-max-microvolt = <1950000>; + regulator-min-microvolt = <1650000>; + regulator-name = "On-module +V1.8_SNVS (LDO1)"; + }; + + LDO2 { + regulator-always-on; + regulator-boot-on; + regulator-max-microvolt = <1150000>; + regulator-min-microvolt = <800000>; + regulator-name = "On-module +V0.8_SNVS (LDO2)"; + }; + + LDO3 { + regulator-always-on; + regulator-boot-on; + regulator-max-microvolt = <1800000>; + regulator-min-microvolt = <1800000>; + regulator-name = "On-module +V1.8A (LDO3)"; + }; + + LDO4 { + regulator-always-on; + regulator-boot-on; + regulator-max-microvolt = <3300000>; + regulator-min-microvolt = <3300000>; + regulator-name = "On-module +V3.3_ADC (LDO4)"; + }; + + LDO5 { + regulator-max-microvolt = <3300000>; + regulator-min-microvolt = <1800000>; + regulator-name = "On-module +V3.3_1.8_SD (LDO5)"; + }; + }; + }; + + rtc_i2c: rtc@32 { + compatible = "epson,rx8130"; + reg = <0x32>; + }; + + /* On-module temperature sensor */ + hwmon_temp_module: sensor@48 { + compatible = "ti,tmp1075"; + reg = <0x48>; + vs-supply = <®_vdd_1v8>; + }; + + adc@49 { + compatible = "ti,ads1015"; + reg = <0x49>; + #address-cells = <1>; + #size-cells = <0>; + + /* Verdin I2C_1 (ADC_4 - ADC_3) */ + channel@0 { + reg = <0>; + ti,datarate = <4>; + ti,gain = <2>; + }; + + /* Verdin I2C_1 (ADC_4 - ADC_1) */ + channel@1 { + reg = <1>; + ti,datarate = <4>; + ti,gain = <2>; + }; + + /* Verdin I2C_1 (ADC_3 - ADC_1) */ + channel@2 { + reg = <2>; + ti,datarate = <4>; + ti,gain = <2>; + }; + + /* Verdin I2C_1 (ADC_2 - ADC_1) */ + channel@3 { + reg = <3>; + ti,datarate = <4>; + ti,gain = <2>; + }; + + /* Verdin I2C_1 ADC_4 */ + channel@4 { + reg = <4>; + ti,datarate = <4>; + ti,gain = <2>; + }; + + /* Verdin I2C_1 ADC_3 */ + channel@5 { + reg = <5>; + ti,datarate = <4>; + ti,gain = <2>; + }; + + /* Verdin I2C_1 ADC_2 */ + channel@6 { + reg = <6>; + ti,datarate = <4>; + ti,gain = <2>; + }; + + /* Verdin I2C_1 ADC_1 */ + channel@7 { + reg = <7>; + ti,datarate = <4>; + ti,gain = <2>; + }; + }; + + eeprom@50 { + compatible = "st,24c02"; + pagesize = <16>; + reg = <0x50>; + }; +}; + +/* Verdin I2C_2_DSI */ +&i2c2 { + /* Lower frequency to avoid DDC/EDID issues with certain displays/screens. */ + clock-frequency = <10000>; + pinctrl-names = "default", "gpio"; + pinctrl-0 = <&pinctrl_i2c2>; + pinctrl-1 = <&pinctrl_i2c2_gpio>; + scl-gpios = <&gpio5 16 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; + sda-gpios = <&gpio5 17 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; + + atmel_mxt_ts_mezzanine: touch-mezzanine@4a { + compatible = "atmel,maxtouch"; + /* Verdin GPIO_3 (SODIMM 210) */ + interrupt-parent = <&gpio1>; + interrupts = <5 IRQ_TYPE_EDGE_FALLING>; + reg = <0x4a>; + /* Verdin GPIO_2 (SODIMM 208) */ + reset-gpios = <&gpio1 1 GPIO_ACTIVE_HIGH>; + status = "disabled"; + }; +}; + +/* TODO: Verdin I2C_3_HDMI */ + +/* Verdin I2C_4_CSI */ +&i2c3 { + clock-frequency = <400000>; + pinctrl-names = "default", "gpio"; + pinctrl-0 = <&pinctrl_i2c3>; + pinctrl-1 = <&pinctrl_i2c3_gpio>; + scl-gpios = <&gpio5 18 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; + sda-gpios = <&gpio5 19 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; +}; + +/* Verdin I2C_1 */ +&i2c4 { + clock-frequency = <400000>; + pinctrl-names = "default", "gpio"; + pinctrl-0 = <&pinctrl_i2c4>; + pinctrl-1 = <&pinctrl_i2c4_gpio>; + scl-gpios = <&gpio5 20 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; + sda-gpios = <&gpio5 21 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; + + gpio_expander_21: gpio-expander@21 { + compatible = "nxp,pcal6416"; + #gpio-cells = <2>; + gpio-controller; + reg = <0x21>; + vcc-supply = <®_3p3v>; + status = "disabled"; + }; + + lvds_ti_sn65dsi83: bridge@2c { + compatible = "ti,sn65dsi83"; + /* Verdin GPIO_9_DSI (SN65DSI84 IRQ, SODIMM 17, unused) */ + /* Verdin GPIO_10_DSI (SODIMM 21) */ + enable-gpios = <&gpio4 28 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_gpio_10_dsi>; + reg = <0x2c>; + status = "disabled"; + }; + + /* Current measurement into module VCC */ + hwmon: hwmon@40 { + compatible = "ti,ina219"; + reg = <0x40>; + shunt-resistor = <10000>; + status = "disabled"; + }; + + hdmi_lontium_lt8912: hdmi@48 { + compatible = "lontium,lt8912b"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_gpio_10_dsi>, <&pinctrl_pwm_3_dsi_hpd_gpio>; + reg = <0x48>; + /* Verdin GPIO_9_DSI (LT8912 INT, SODIMM 17, unused) */ + /* Verdin GPIO_10_DSI (SODIMM 21) */ + reset-gpios = <&gpio4 28 GPIO_ACTIVE_LOW>; + status = "disabled"; + }; + + atmel_mxt_ts: touch@4a { + compatible = "atmel,maxtouch"; + /* + * Verdin GPIO_9_DSI + * (TOUCH_INT#, SODIMM 17, also routed to SN65DSI83 IRQ albeit currently unused) + */ + interrupt-parent = <&gpio4>; + interrupts = <25 IRQ_TYPE_EDGE_FALLING>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_gpio_9_dsi>, <&pinctrl_i2s_2_bclk_touch_reset>; + reg = <0x4a>; + /* Verdin I2S_2_BCLK (TOUCH_RESET#, SODIMM 42) */ + reset-gpios = <&gpio5 0 GPIO_ACTIVE_HIGH>; + status = "disabled"; + }; + + /* Temperature sensor on carrier board */ + hwmon_temp: sensor@4f { + compatible = "ti,tmp75c"; + reg = <0x4f>; + status = "disabled"; + }; + + /* EEPROM on display adapter (MIPI DSI Display Adapter) */ + eeprom_display_adapter: eeprom@50 { + compatible = "st,24c02"; + pagesize = <16>; + reg = <0x50>; + status = "disabled"; + }; + + /* EEPROM on carrier board */ + eeprom_carrier_board: eeprom@57 { + compatible = "st,24c02"; + pagesize = <16>; + reg = <0x57>; + status = "disabled"; + }; +}; + +/* TODO: Verdin PCIE_1 */ + +/* Verdin PWM_1 */ +&pwm1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pwm_1>; + #pwm-cells = <3>; +}; + +/* Verdin PWM_2 */ +&pwm2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pwm_2>; + #pwm-cells = <3>; +}; + +/* Verdin PWM_3_DSI */ +&pwm3 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pwm_3>; + #pwm-cells = <3>; +}; + +/* TODO: Verdin I2S_1 */ + +/* TODO: Verdin I2S_2 */ + +&snvs_pwrkey { + status = "okay"; +}; + +/* Verdin UART_1 */ +&uart1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart1>; + uart-has-rtscts; +}; + +/* Verdin UART_2 */ +&uart2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart2>; + uart-has-rtscts; +}; + +/* Verdin UART_3, used as the Linux Console */ +&uart3 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart3>; +}; + +/* Verdin UART_4, used for Bluetooth on Wi-Fi/Bluetooth SKUs */ +&uart4 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart4>; +}; + +/* Verdin USB_1 */ +&usb3_phy0 { + vbus-supply = <®_usb1_vbus>; +}; + +&usb_dwc3_0 { + adp-disable; + dr_mode = "otg"; + hnp-disable; + maximum-speed = "high-speed"; + over-current-active-low; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usb_1_id>; + srp-disable; +}; + +/* Verdin USB_2 */ +&usb3_phy1 { + vbus-supply = <®_usb2_vbus>; +}; + +&usb_dwc3_1 { + disable-over-current; + dr_mode = "host"; +}; + +/* Verdin SD_1 */ +&usdhc2 { + assigned-clocks = <&clk IMX8MP_CLK_USDHC2>; + assigned-clock-rates = <400000000>; + bus-width = <4>; + cd-gpios = <&gpio2 12 GPIO_ACTIVE_LOW>; + disable-wp; + pinctrl-names = "default", "state_100mhz", "state_200mhz", "sleep"; + pinctrl-0 = <&pinctrl_usdhc2>, <&pinctrl_usdhc2_cd>; + pinctrl-1 = <&pinctrl_usdhc2_100mhz>, <&pinctrl_usdhc2_cd>; + pinctrl-2 = <&pinctrl_usdhc2_200mhz>, <&pinctrl_usdhc2_cd>; + pinctrl-3 = <&pinctrl_usdhc2_sleep>, <&pinctrl_usdhc2_cd_sleep>; + vmmc-supply = <®_usdhc2_vmmc>; +}; + +/* On-module eMMC */ +&usdhc3 { + assigned-clocks = <&clk IMX8MP_CLK_USDHC3_ROOT>; + assigned-clock-rates = <400000000>; + bus-width = <8>; + non-removable; + pinctrl-names = "default", "state_100mhz", "state_200mhz"; + pinctrl-0 = <&pinctrl_usdhc3>; + pinctrl-1 = <&pinctrl_usdhc3_100mhz>; + pinctrl-2 = <&pinctrl_usdhc3_200mhz>; + status = "okay"; +}; + +&wdog1 { + fsl,ext-reset-output; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_wdog>; + status = "okay"; +}; + +&iomuxc { + pinctrl_bt_uart: btuartgrp { + fsl,pins = + <MX8MP_IOMUXC_ECSPI2_MISO__UART4_DCE_CTS 0x1c4>, + <MX8MP_IOMUXC_ECSPI2_MOSI__UART4_DCE_TX 0x1c4>, + <MX8MP_IOMUXC_ECSPI2_SCLK__UART4_DCE_RX 0x1c4>, + <MX8MP_IOMUXC_ECSPI2_SS0__UART4_DCE_RTS 0x1c4>; + }; + + pinctrl_ctrl_sleep_moci: ctrlsleepmocigrp { + fsl,pins = + <MX8MP_IOMUXC_SAI3_RXC__GPIO4_IO29 0x1c4>; /* SODIMM 256 */ + }; + + pinctrl_ecspi1: ecspi1grp { + fsl,pins = + <MX8MP_IOMUXC_ECSPI1_MISO__ECSPI1_MISO 0x1c4>, /* SODIMM 198 */ + <MX8MP_IOMUXC_ECSPI1_MOSI__ECSPI1_MOSI 0x4>, /* SODIMM 200 */ + <MX8MP_IOMUXC_ECSPI1_SCLK__ECSPI1_SCLK 0x4>, /* SODIMM 196 */ + <MX8MP_IOMUXC_ECSPI1_SS0__GPIO5_IO09 0x1c4>; /* SODIMM 202 */ + }; + + /* Connection On Board PHY */ + pinctrl_eqos: eqosgrp { + fsl,pins = + <MX8MP_IOMUXC_ENET_MDC__ENET_QOS_MDC 0x3>, + <MX8MP_IOMUXC_ENET_MDIO__ENET_QOS_MDIO 0x3>, + <MX8MP_IOMUXC_ENET_RD0__ENET_QOS_RGMII_RD0 0x91>, + <MX8MP_IOMUXC_ENET_RD1__ENET_QOS_RGMII_RD1 0x91>, + <MX8MP_IOMUXC_ENET_RD2__ENET_QOS_RGMII_RD2 0x91>, + <MX8MP_IOMUXC_ENET_RD3__ENET_QOS_RGMII_RD3 0x91>, + <MX8MP_IOMUXC_ENET_RXC__CCM_ENET_QOS_CLOCK_GENERATE_RX_CLK 0x91>, + <MX8MP_IOMUXC_ENET_RX_CTL__ENET_QOS_RGMII_RX_CTL 0x91>, + <MX8MP_IOMUXC_ENET_TD0__ENET_QOS_RGMII_TD0 0x1f>, + <MX8MP_IOMUXC_ENET_TD1__ENET_QOS_RGMII_TD1 0x1f>, + <MX8MP_IOMUXC_ENET_TD2__ENET_QOS_RGMII_TD2 0x1f>, + <MX8MP_IOMUXC_ENET_TD3__ENET_QOS_RGMII_TD3 0x1f>, + <MX8MP_IOMUXC_ENET_TX_CTL__ENET_QOS_RGMII_TX_CTL 0x1f>, + <MX8MP_IOMUXC_ENET_TXC__CCM_ENET_QOS_CLOCK_GENERATE_TX_CLK 0x1f>; + }; + + /* ETH_INT# shared with TPM_INT# (usually N/A) */ + pinctrl_eth_tpm_int: ethtpmintgrp { + fsl,pins = + <MX8MP_IOMUXC_GPIO1_IO10__GPIO1_IO10 0x1c4>; + }; + + /* Connection Carrier Board PHY ETH_2 */ + pinctrl_fec: fecgrp { + fsl,pins = + <MX8MP_IOMUXC_SAI1_RXD2__ENET1_MDC 0x3>, /* SODIMM 193 */ + <MX8MP_IOMUXC_SAI1_RXD3__ENET1_MDIO 0x3>, /* SODIMM 191 */ + <MX8MP_IOMUXC_SAI1_RXD4__ENET1_RGMII_RD0 0x91>, /* SODIMM 201 */ + <MX8MP_IOMUXC_SAI1_RXD5__ENET1_RGMII_RD1 0x91>, /* SODIMM 203 */ + <MX8MP_IOMUXC_SAI1_RXD6__ENET1_RGMII_RD2 0x91>, /* SODIMM 205 */ + <MX8MP_IOMUXC_SAI1_RXD7__ENET1_RGMII_RD3 0x91>, /* SODIMM 207 */ + <MX8MP_IOMUXC_SAI1_TXC__ENET1_RGMII_RXC 0x91>, /* SODIMM 197 */ + <MX8MP_IOMUXC_SAI1_TXFS__ENET1_RGMII_RX_CTL 0x91>, /* SODIMM 199 */ + <MX8MP_IOMUXC_SAI1_TXD0__ENET1_RGMII_TD0 0x1f>, /* SODIMM 221 */ + <MX8MP_IOMUXC_SAI1_TXD1__ENET1_RGMII_TD1 0x1f>, /* SODIMM 219 */ + <MX8MP_IOMUXC_SAI1_TXD2__ENET1_RGMII_TD2 0x1f>, /* SODIMM 217 */ + <MX8MP_IOMUXC_SAI1_TXD3__ENET1_RGMII_TD3 0x1f>, /* SODIMM 215 */ + <MX8MP_IOMUXC_SAI1_TXD4__ENET1_RGMII_TX_CTL 0x1f>, /* SODIMM 211 */ + <MX8MP_IOMUXC_SAI1_TXD5__ENET1_RGMII_TXC 0x1f>, /* SODIMM 213 */ + <MX8MP_IOMUXC_SAI1_TXD6__GPIO4_IO18 0x1c4>; /* SODIMM 189 */ + }; + + pinctrl_fec_sleep: fecsleepgrp { + fsl,pins = + <MX8MP_IOMUXC_SAI1_RXD2__ENET1_MDC 0x3>, /* SODIMM 193 */ + <MX8MP_IOMUXC_SAI1_RXD3__ENET1_MDIO 0x3>, /* SODIMM 191 */ + <MX8MP_IOMUXC_SAI1_RXD4__ENET1_RGMII_RD0 0x91>, /* SODIMM 201 */ + <MX8MP_IOMUXC_SAI1_RXD5__ENET1_RGMII_RD1 0x91>, /* SODIMM 203 */ + <MX8MP_IOMUXC_SAI1_RXD6__ENET1_RGMII_RD2 0x91>, /* SODIMM 205 */ + <MX8MP_IOMUXC_SAI1_RXD7__ENET1_RGMII_RD3 0x91>, /* SODIMM 207 */ + <MX8MP_IOMUXC_SAI1_TXC__ENET1_RGMII_RXC 0x91>, /* SODIMM 197 */ + <MX8MP_IOMUXC_SAI1_TXFS__ENET1_RGMII_RX_CTL 0x91>, /* SODIMM 199 */ + <MX8MP_IOMUXC_SAI1_TXD0__GPIO4_IO12 0x1f>, /* SODIMM 221 */ + <MX8MP_IOMUXC_SAI1_TXD1__GPIO4_IO13 0x1f>, /* SODIMM 219 */ + <MX8MP_IOMUXC_SAI1_TXD2__GPIO4_IO14 0x1f>, /* SODIMM 217 */ + <MX8MP_IOMUXC_SAI1_TXD3__GPIO4_IO15 0x1f>, /* SODIMM 215 */ + <MX8MP_IOMUXC_SAI1_TXD4__GPIO4_IO16 0x1f>, /* SODIMM 211 */ + <MX8MP_IOMUXC_SAI1_TXD5__GPIO4_IO17 0x1f>, /* SODIMM 213 */ + <MX8MP_IOMUXC_SAI1_TXD6__GPIO4_IO18 0x184>; /* SODIMM 189 */ + }; + + pinctrl_flexcan1: flexcan1grp { + fsl,pins = + <MX8MP_IOMUXC_SPDIF_RX__CAN1_RX 0x154>, /* SODIMM 22 */ + <MX8MP_IOMUXC_SPDIF_TX__CAN1_TX 0x154>; /* SODIMM 20 */ + }; + + pinctrl_flexcan2: flexcan2grp { + fsl,pins = + <MX8MP_IOMUXC_SAI2_MCLK__CAN2_RX 0x154>, /* SODIMM 26 */ + <MX8MP_IOMUXC_SAI2_TXD0__CAN2_TX 0x154>; /* SODIMM 24 */ + }; + + pinctrl_flexspi0: flexspi0grp { + fsl,pins = + <MX8MP_IOMUXC_NAND_ALE__FLEXSPI_A_SCLK 0x1c2>, /* SODIMM 52 */ + <MX8MP_IOMUXC_NAND_CE0_B__FLEXSPI_A_SS0_B 0x82>, /* SODIMM 54 */ + <MX8MP_IOMUXC_NAND_DQS__FLEXSPI_A_DQS 0x82>, /* SODIMM 66 */ + <MX8MP_IOMUXC_NAND_DATA00__FLEXSPI_A_DATA00 0x82>, /* SODIMM 56 */ + <MX8MP_IOMUXC_NAND_DATA01__FLEXSPI_A_DATA01 0x82>, /* SODIMM 58 */ + <MX8MP_IOMUXC_NAND_DATA02__FLEXSPI_A_DATA02 0x82>, /* SODIMM 60 */ + <MX8MP_IOMUXC_NAND_DATA03__FLEXSPI_A_DATA03 0x82>, /* SODIMM 62 */ + <MX8MP_IOMUXC_NAND_READY_B__GPIO3_IO16 0x82>; /* SODIMM 64 */ + }; + + pinctrl_gpio1: gpio1grp { + fsl,pins = + <MX8MP_IOMUXC_GPIO1_IO00__GPIO1_IO00 0x184>; /* SODIMM 206 */ + }; + + pinctrl_gpio2: gpio2grp { + fsl,pins = + <MX8MP_IOMUXC_GPIO1_IO01__GPIO1_IO01 0x1c4>; /* SODIMM 208 */ + }; + + pinctrl_gpio3: gpio3grp { + fsl,pins = + <MX8MP_IOMUXC_GPIO1_IO05__GPIO1_IO05 0x184>; /* SODIMM 210 */ + }; + + pinctrl_gpio4: gpio4grp { + fsl,pins = + <MX8MP_IOMUXC_GPIO1_IO06__GPIO1_IO06 0x184>; /* SODIMM 212 */ + }; + + pinctrl_gpio5: gpio5grp { + fsl,pins = + <MX8MP_IOMUXC_GPIO1_IO07__GPIO1_IO07 0x184>; /* SODIMM 216 */ + }; + + pinctrl_gpio6: gpio6grp { + fsl,pins = + <MX8MP_IOMUXC_GPIO1_IO08__GPIO1_IO08 0x184>; /* SODIMM 218 */ + }; + + pinctrl_gpio7: gpio7grp { + fsl,pins = + <MX8MP_IOMUXC_SAI1_RXD1__GPIO4_IO03 0x184>; /* SODIMM 220 */ + }; + + pinctrl_gpio8: gpio8grp { + fsl,pins = + <MX8MP_IOMUXC_SAI1_RXC__GPIO4_IO01 0x184>; /* SODIMM 222 */ + }; + + /* Verdin GPIO_9_DSI (pulled-up as active-low) */ + pinctrl_gpio_9_dsi: gpio9dsigrp { + fsl,pins = + <MX8MP_IOMUXC_SAI2_TXC__GPIO4_IO25 0x1c4>; /* SODIMM 17 */ + }; + + /* Verdin GPIO_10_DSI */ + pinctrl_gpio_10_dsi: gpio10dsigrp { + fsl,pins = + <MX8MP_IOMUXC_SAI3_RXFS__GPIO4_IO28 0x1c4>; /* SODIMM 21 */ + }; + + /* Non-wifi MSP usage only */ + pinctrl_gpio_hog1: gpiohog1grp { + fsl,pins = + <MX8MP_IOMUXC_ECSPI2_MISO__GPIO5_IO12 0x1c4>, /* SODIMM 116 */ + <MX8MP_IOMUXC_ECSPI2_MOSI__GPIO5_IO11 0x1c4>, /* SODIMM 152 */ + <MX8MP_IOMUXC_ECSPI2_SCLK__GPIO5_IO10 0x1c4>, /* SODIMM 164 */ + <MX8MP_IOMUXC_ECSPI2_SS0__GPIO5_IO13 0x1c4>; /* SODIMM 128 */ + }; + + /* USB_2_OC# */ + pinctrl_gpio_hog2: gpiohog2grp { + fsl,pins = + <MX8MP_IOMUXC_SAI3_MCLK__GPIO5_IO02 0x1c4>; /* SODIMM 187 */ + }; + + pinctrl_gpio_hog3: gpiohog3grp { + fsl,pins = + <MX8MP_IOMUXC_GPIO1_IO13__GPIO1_IO13 0x1c4>, /* SODIMM 157 */ + /* CSI_1_MCLK */ + <MX8MP_IOMUXC_GPIO1_IO15__GPIO1_IO15 0x1c4>; /* SODIMM 91 */ + }; + + /* Wifi usage only */ + pinctrl_gpio_hog4: gpiohog4grp { + fsl,pins = + <MX8MP_IOMUXC_UART4_RXD__GPIO5_IO28 0x1c4>, /* SODIMM 151 */ + <MX8MP_IOMUXC_UART4_TXD__GPIO5_IO29 0x1c4>; /* SODIMM 153 */ + }; + + pinctrl_gpio_keys: gpiokeysgrp { + fsl,pins = + <MX8MP_IOMUXC_SAI1_RXFS__GPIO4_IO00 0x1c4>; /* SODIMM 252 */ + }; + + pinctrl_hdmi_hog: hdmihoggrp { + fsl,pins = + <MX8MP_IOMUXC_HDMI_CEC__HDMIMIX_HDMI_CEC 0x40000019>, /* SODIMM 63 */ + <MX8MP_IOMUXC_HDMI_DDC_SCL__HDMIMIX_HDMI_SCL 0x400001c3>, /* SODIMM 59 */ + <MX8MP_IOMUXC_HDMI_DDC_SDA__HDMIMIX_HDMI_SDA 0x400001c3>, /* SODIMM 57 */ + <MX8MP_IOMUXC_HDMI_HPD__HDMIMIX_HDMI_HPD 0x40000019>; /* SODIMM 61 */ + }; + + /* On-module I2C */ + pinctrl_i2c1: i2c1grp { + fsl,pins = + <MX8MP_IOMUXC_I2C1_SCL__I2C1_SCL 0x400001c6>, /* PMIC_I2C_SCL */ + <MX8MP_IOMUXC_I2C1_SDA__I2C1_SDA 0x400001c6>; /* PMIC_I2C_SDA */ + }; + + pinctrl_i2c1_gpio: i2c1gpiogrp { + fsl,pins = + <MX8MP_IOMUXC_I2C1_SCL__GPIO5_IO14 0x400001c6>, /* PMIC_I2C_SCL */ + <MX8MP_IOMUXC_I2C1_SDA__GPIO5_IO15 0x400001c6>; /* PMIC_I2C_SDA */ + }; + + /* Verdin I2C_2_DSI */ + pinctrl_i2c2: i2c2grp { + fsl,pins = + <MX8MP_IOMUXC_I2C2_SCL__I2C2_SCL 0x400001c6>, /* SODIMM 55 */ + <MX8MP_IOMUXC_I2C2_SDA__I2C2_SDA 0x400001c6>; /* SODIMM 53 */ + }; + + pinctrl_i2c2_gpio: i2c2gpiogrp { + fsl,pins = + <MX8MP_IOMUXC_I2C2_SCL__GPIO5_IO16 0x400001c6>, /* SODIMM 55 */ + <MX8MP_IOMUXC_I2C2_SDA__GPIO5_IO17 0x400001c6>; /* SODIMM 53 */ + }; + + /* Verdin I2C_4_CSI */ + pinctrl_i2c3: i2c3grp { + fsl,pins = + <MX8MP_IOMUXC_I2C3_SCL__I2C3_SCL 0x400001c6>, /* SODIMM 95 */ + <MX8MP_IOMUXC_I2C3_SDA__I2C3_SDA 0x400001c6>; /* SODIMM 93 */ + }; + + pinctrl_i2c3_gpio: i2c3gpiogrp { + fsl,pins = + <MX8MP_IOMUXC_I2C3_SCL__GPIO5_IO18 0x400001c6>, /* SODIMM 95 */ + <MX8MP_IOMUXC_I2C3_SDA__GPIO5_IO19 0x400001c6>; /* SODIMM 93 */ + }; + + /* Verdin I2C_1 */ + pinctrl_i2c4: i2c4grp { + fsl,pins = + <MX8MP_IOMUXC_I2C4_SCL__I2C4_SCL 0x400001c6>, /* SODIMM 14 */ + <MX8MP_IOMUXC_I2C4_SDA__I2C4_SDA 0x400001c6>; /* SODIMM 12 */ + }; + + pinctrl_i2c4_gpio: i2c4gpiogrp { + fsl,pins = + <MX8MP_IOMUXC_I2C4_SCL__GPIO5_IO20 0x400001c6>, /* SODIMM 14 */ + <MX8MP_IOMUXC_I2C4_SDA__GPIO5_IO21 0x400001c6>; /* SODIMM 12 */ + }; + + /* Verdin I2S_2_BCLK (TOUCH_RESET#) */ + pinctrl_i2s_2_bclk_touch_reset: i2s2bclktouchresetgrp { + fsl,pins = + <MX8MP_IOMUXC_SAI3_TXC__GPIO5_IO00 0x184>; /* SODIMM 42 */ + }; + + /* Verdin I2S_2_D_OUT shared with SAI3 */ + pinctrl_i2s_2_d_out_dsi_1_bkl_en: i2s2doutdsi1bklengrp { + fsl,pins = + <MX8MP_IOMUXC_SAI3_TXD__GPIO5_IO01 0x184>; /* SODIMM 46 */ + }; + + pinctrl_pcie: pciegrp { + fsl,pins = + <MX8MP_IOMUXC_SAI1_TXD7__GPIO4_IO19 0x4>, /* SODIMM 244 */ + <MX8MP_IOMUXC_SD2_RESET_B__GPIO2_IO19 0x1c4>; /* PMIC_EN_PCIe_CLK, unused */ + }; + + pinctrl_pmic: pmicirqgrp { + fsl,pins = + <MX8MP_IOMUXC_GPIO1_IO03__GPIO1_IO03 0x1c4>; /* PMIC_INT# */ + }; + + pinctrl_pwm_1: pwm1grp { + fsl,pins = + <MX8MP_IOMUXC_SPDIF_EXT_CLK__PWM1_OUT 0x6>; /* SODIMM 15 */ + }; + + pinctrl_pwm_2: pwm2grp { + fsl,pins = + <MX8MP_IOMUXC_GPIO1_IO11__PWM2_OUT 0x6>; /* SODIMM 16 */ + }; + + /* Verdin PWM_3_DSI shared with GPIO3_IO20 */ + pinctrl_pwm_3: pwm3grp { + fsl,pins = + <MX8MP_IOMUXC_SAI5_RXC__PWM3_OUT 0x6>; /* SODIMM 19 */ + }; + + /* Verdin PWM_3_DSI (pulled-down as active-high) shared with PWM3_OUT */ + pinctrl_pwm_3_dsi_hpd_gpio: pwm3dsi1hpdgpiogrp { + fsl,pins = + <MX8MP_IOMUXC_SAI5_RXC__GPIO3_IO20 0x184>; /* SODIMM 19 */ + }; + + pinctrl_reg_eth: regethgrp { + fsl,pins = + <MX8MP_IOMUXC_SD2_WP__GPIO2_IO20 0x184>; /* PMIC_EN_ETH */ + }; + + pinctrl_sai1: sai1grp { + fsl,pins = + <MX8MP_IOMUXC_SAI1_MCLK__AUDIOMIX_SAI1_MCLK 0x96>, /* SODIMM 38 */ + <MX8MP_IOMUXC_SAI1_RXD0__AUDIOMIX_SAI1_RX_DATA00 0x1d6>, /* SODIMM 36 */ + <MX8MP_IOMUXC_SAI5_MCLK__AUDIOMIX_SAI1_TX_BCLK 0x1d6>, /* SODIMM 30 */ + <MX8MP_IOMUXC_SAI5_RXD1__AUDIOMIX_SAI1_TX_SYNC 0x1d6>, /* SODIMM 32 */ + <MX8MP_IOMUXC_SAI5_RXFS__AUDIOMIX_SAI1_TX_DATA00 0x96>; /* SODIMM 34 */ + }; + + pinctrl_sai3: sai3grp { + fsl,pins = + <MX8MP_IOMUXC_SAI3_RXD__AUDIOMIX_SAI3_RX_DATA00 0x1d6>, /* SODIMM 48 */ + <MX8MP_IOMUXC_SAI3_TXC__AUDIOMIX_SAI3_TX_BCLK 0x1d6>, /* SODIMM 42 */ + <MX8MP_IOMUXC_SAI3_TXD__AUDIOMIX_SAI3_TX_DATA00 0x96>, /* SODIMM 46 */ + <MX8MP_IOMUXC_SAI3_TXFS__AUDIOMIX_SAI3_TX_SYNC 0x1d6>; /* SODIMM 44 */ + }; + + pinctrl_uart1: uart1grp { + fsl,pins = + <MX8MP_IOMUXC_SAI2_RXD0__UART1_DCE_RTS 0x1c4>, /* SODIMM 135 */ + <MX8MP_IOMUXC_SAI2_TXFS__UART1_DCE_CTS 0x1c4>, /* SODIMM 133 */ + <MX8MP_IOMUXC_UART1_RXD__UART1_DCE_RX 0x1c4>, /* SODIMM 129 */ + <MX8MP_IOMUXC_UART1_TXD__UART1_DCE_TX 0x1c4>; /* SODIMM 131 */ + }; + + pinctrl_uart2: uart2grp { + fsl,pins = + <MX8MP_IOMUXC_SD1_DATA4__UART2_DCE_RTS 0x1c4>, /* SODIMM 143 */ + <MX8MP_IOMUXC_SD1_DATA5__UART2_DCE_CTS 0x1c4>, /* SODIMM 141 */ + <MX8MP_IOMUXC_UART2_RXD__UART2_DCE_RX 0x1c4>, /* SODIMM 137 */ + <MX8MP_IOMUXC_UART2_TXD__UART2_DCE_TX 0x1c4>; /* SODIMM 139 */ + }; + + pinctrl_uart3: uart3grp { + fsl,pins = + <MX8MP_IOMUXC_UART3_RXD__UART3_DCE_RX 0x1c4>, /* SODIMM 147 */ + <MX8MP_IOMUXC_UART3_TXD__UART3_DCE_TX 0x1c4>; /* SODIMM 149 */ + }; + + /* Non-wifi usage only */ + pinctrl_uart4: uart4grp { + fsl,pins = + <MX8MP_IOMUXC_UART4_RXD__UART4_DCE_RX 0x1c4>, /* SODIMM 151 */ + <MX8MP_IOMUXC_UART4_TXD__UART4_DCE_TX 0x1c4>; /* SODIMM 153 */ + }; + + pinctrl_usb1_vbus: usb1vbusgrp { + fsl,pins = + <MX8MP_IOMUXC_GPIO1_IO12__USB1_OTG_PWR 0x19>; /* SODIMM 155 */ + }; + + /* USB_1_ID */ + pinctrl_usb_1_id: usb1idgrp { + fsl,pins = + <MX8MP_IOMUXC_SD1_RESET_B__GPIO2_IO10 0x1c4>; /* SODIMM 161 */ + }; + + pinctrl_usb2_vbus: usb2vbusgrp { + fsl,pins = + <MX8MP_IOMUXC_GPIO1_IO14__USB2_OTG_PWR 0x19>; /* SODIMM 185 */ + }; + + /* On-module Wi-Fi */ + pinctrl_usdhc1: usdhc1grp { + fsl,pins = + <MX8MP_IOMUXC_SD1_CLK__USDHC1_CLK 0x190>, + <MX8MP_IOMUXC_SD1_CMD__USDHC1_CMD 0x1d0>, + <MX8MP_IOMUXC_SD1_DATA0__USDHC1_DATA0 0x1d0>, + <MX8MP_IOMUXC_SD1_DATA1__USDHC1_DATA1 0x1d0>, + <MX8MP_IOMUXC_SD1_DATA2__USDHC1_DATA2 0x1d0>, + <MX8MP_IOMUXC_SD1_DATA3__USDHC1_DATA3 0x1d0>; + }; + + pinctrl_usdhc1_100mhz: usdhc1-100mhzgrp { + fsl,pins = + <MX8MP_IOMUXC_SD1_CLK__USDHC1_CLK 0x194>, + <MX8MP_IOMUXC_SD1_CMD__USDHC1_CMD 0x1d4>, + <MX8MP_IOMUXC_SD1_DATA0__USDHC1_DATA0 0x1d4>, + <MX8MP_IOMUXC_SD1_DATA1__USDHC1_DATA1 0x1d4>, + <MX8MP_IOMUXC_SD1_DATA2__USDHC1_DATA2 0x1d4>, + <MX8MP_IOMUXC_SD1_DATA3__USDHC1_DATA3 0x1d4>; + }; + + pinctrl_usdhc1_200mhz: usdhc1-200mhzgrp { + fsl,pins = + <MX8MP_IOMUXC_SD1_CLK__USDHC1_CLK 0x196>, + <MX8MP_IOMUXC_SD1_CMD__USDHC1_CMD 0x1d6>, + <MX8MP_IOMUXC_SD1_DATA0__USDHC1_DATA0 0x1d6>, + <MX8MP_IOMUXC_SD1_DATA1__USDHC1_DATA1 0x1d6>, + <MX8MP_IOMUXC_SD1_DATA2__USDHC1_DATA2 0x1d6>, + <MX8MP_IOMUXC_SD1_DATA3__USDHC1_DATA3 0x1d6>; + }; + + pinctrl_usdhc2_cd: usdhc2cdgrp { + fsl,pins = + <MX8MP_IOMUXC_SD2_CD_B__GPIO2_IO12 0x1c4>; /* SODIMM 84 */ + }; + + pinctrl_usdhc2_cd_sleep: usdhc2cdslpgrp { + fsl,pins = + <MX8MP_IOMUXC_SD2_CD_B__GPIO2_IO12 0x0>; /* SODIMM 84 */ + }; + + pinctrl_usdhc2_pwr_en: usdhc2pwrengrp { + fsl,pins = + <MX8MP_IOMUXC_SAI2_RXC__GPIO4_IO22 0x4>; /* SODIMM 76 */ + }; + + pinctrl_usdhc2: usdhc2grp { + fsl,pins = + <MX8MP_IOMUXC_GPIO1_IO04__USDHC2_VSELECT 0x4>, /* PMIC_USDHC_VSELECT */ + <MX8MP_IOMUXC_SD2_CLK__USDHC2_CLK 0x190>, /* SODIMM 78 */ + <MX8MP_IOMUXC_SD2_CMD__USDHC2_CMD 0x1d0>, /* SODIMM 74 */ + <MX8MP_IOMUXC_SD2_DATA0__USDHC2_DATA0 0x1d0>, /* SODIMM 80 */ + <MX8MP_IOMUXC_SD2_DATA1__USDHC2_DATA1 0x1d0>, /* SODIMM 82 */ + <MX8MP_IOMUXC_SD2_DATA2__USDHC2_DATA2 0x1d0>, /* SODIMM 70 */ + <MX8MP_IOMUXC_SD2_DATA3__USDHC2_DATA3 0x1d0>; /* SODIMM 72 */ + }; + + pinctrl_usdhc2_100mhz: usdhc2-100mhzgrp { + fsl,pins = + <MX8MP_IOMUXC_GPIO1_IO04__USDHC2_VSELECT 0x4>, + <MX8MP_IOMUXC_SD2_CLK__USDHC2_CLK 0x194>, + <MX8MP_IOMUXC_SD2_CMD__USDHC2_CMD 0x1d4>, + <MX8MP_IOMUXC_SD2_DATA0__USDHC2_DATA0 0x1d4>, + <MX8MP_IOMUXC_SD2_DATA1__USDHC2_DATA1 0x1d4>, + <MX8MP_IOMUXC_SD2_DATA2__USDHC2_DATA2 0x1d4>, + <MX8MP_IOMUXC_SD2_DATA3__USDHC2_DATA3 0x1d4>; + }; + + pinctrl_usdhc2_200mhz: usdhc2-200mhzgrp { + fsl,pins = + <MX8MP_IOMUXC_GPIO1_IO04__USDHC2_VSELECT 0x4>, + <MX8MP_IOMUXC_SD2_CLK__USDHC2_CLK 0x196>, + <MX8MP_IOMUXC_SD2_CMD__USDHC2_CMD 0x1d6>, + <MX8MP_IOMUXC_SD2_DATA0__USDHC2_DATA0 0x1d6>, + <MX8MP_IOMUXC_SD2_DATA1__USDHC2_DATA1 0x1d6>, + <MX8MP_IOMUXC_SD2_DATA2__USDHC2_DATA2 0x1d6>, + <MX8MP_IOMUXC_SD2_DATA3__USDHC2_DATA3 0x1d6>; + }; + + /* Avoid backfeeding with removed card power */ + pinctrl_usdhc2_sleep: usdhc2slpgrp { + fsl,pins = + <MX8MP_IOMUXC_GPIO1_IO04__USDHC2_VSELECT 0x0>, + <MX8MP_IOMUXC_SD2_CLK__USDHC2_CLK 0x100>, + <MX8MP_IOMUXC_SD2_CMD__USDHC2_CMD 0x100>, + <MX8MP_IOMUXC_SD2_DATA0__USDHC2_DATA0 0x100>, + <MX8MP_IOMUXC_SD2_DATA1__USDHC2_DATA1 0x100>, + <MX8MP_IOMUXC_SD2_DATA2__USDHC2_DATA2 0x100>, + <MX8MP_IOMUXC_SD2_DATA3__USDHC2_DATA3 0x100>; + }; + + pinctrl_usdhc3: usdhc3grp { + fsl,pins = + <MX8MP_IOMUXC_GPIO1_IO09__USDHC3_RESET_B 0x1d1>, + <MX8MP_IOMUXC_NAND_CE1_B__USDHC3_STROBE 0x190>, + <MX8MP_IOMUXC_NAND_CE2_B__USDHC3_DATA5 0x1d0>, + <MX8MP_IOMUXC_NAND_CE3_B__USDHC3_DATA6 0x1d0>, + <MX8MP_IOMUXC_NAND_CLE__USDHC3_DATA7 0x1d0>, + <MX8MP_IOMUXC_NAND_DATA04__USDHC3_DATA0 0x1d0>, + <MX8MP_IOMUXC_NAND_DATA05__USDHC3_DATA1 0x1d0>, + <MX8MP_IOMUXC_NAND_DATA06__USDHC3_DATA2 0x1d0>, + <MX8MP_IOMUXC_NAND_DATA07__USDHC3_DATA3 0x1d0>, + <MX8MP_IOMUXC_NAND_RE_B__USDHC3_DATA4 0x1d0>, + <MX8MP_IOMUXC_NAND_WE_B__USDHC3_CLK 0x190>, + <MX8MP_IOMUXC_NAND_WP_B__USDHC3_CMD 0x1d0>; + }; + + pinctrl_usdhc3_100mhz: usdhc3-100mhzgrp { + fsl,pins = + <MX8MP_IOMUXC_GPIO1_IO09__USDHC3_RESET_B 0x1d1>, + <MX8MP_IOMUXC_NAND_CE1_B__USDHC3_STROBE 0x194>, + <MX8MP_IOMUXC_NAND_CE2_B__USDHC3_DATA5 0x1d4>, + <MX8MP_IOMUXC_NAND_CE3_B__USDHC3_DATA6 0x1d4>, + <MX8MP_IOMUXC_NAND_CLE__USDHC3_DATA7 0x1d4>, + <MX8MP_IOMUXC_NAND_DATA04__USDHC3_DATA0 0x1d4>, + <MX8MP_IOMUXC_NAND_DATA05__USDHC3_DATA1 0x1d4>, + <MX8MP_IOMUXC_NAND_DATA06__USDHC3_DATA2 0x1d4>, + <MX8MP_IOMUXC_NAND_DATA07__USDHC3_DATA3 0x1d4>, + <MX8MP_IOMUXC_NAND_RE_B__USDHC3_DATA4 0x1d4>, + <MX8MP_IOMUXC_NAND_WE_B__USDHC3_CLK 0x194>, + <MX8MP_IOMUXC_NAND_WP_B__USDHC3_CMD 0x1d4>; + }; + + pinctrl_usdhc3_200mhz: usdhc3-200mhzgrp { + fsl,pins = + <MX8MP_IOMUXC_GPIO1_IO09__USDHC3_RESET_B 0x1d1>, + <MX8MP_IOMUXC_NAND_CE1_B__USDHC3_STROBE 0x196>, + <MX8MP_IOMUXC_NAND_CE2_B__USDHC3_DATA5 0x1d2>, + <MX8MP_IOMUXC_NAND_CE3_B__USDHC3_DATA6 0x1d2>, + <MX8MP_IOMUXC_NAND_CLE__USDHC3_DATA7 0x1d2>, + <MX8MP_IOMUXC_NAND_DATA04__USDHC3_DATA0 0x1d2>, + <MX8MP_IOMUXC_NAND_DATA05__USDHC3_DATA1 0x1d2>, + <MX8MP_IOMUXC_NAND_DATA06__USDHC3_DATA2 0x1d2>, + <MX8MP_IOMUXC_NAND_DATA07__USDHC3_DATA3 0x1d2>, + <MX8MP_IOMUXC_NAND_RE_B__USDHC3_DATA4 0x1d2>, + <MX8MP_IOMUXC_NAND_WE_B__USDHC3_CLK 0x196>, + <MX8MP_IOMUXC_NAND_WP_B__USDHC3_CMD 0x1d6>; + }; + + pinctrl_wdog: wdoggrp { + fsl,pins = + <MX8MP_IOMUXC_GPIO1_IO02__WDOG1_WDOG_B 0xc6>; /* PMIC_WDI */ + }; + + pinctrl_bluetooth_ctrl: bluetoothctrlgrp { + fsl,pins = + <MX8MP_IOMUXC_SD1_DATA6__GPIO2_IO08 0x1c4>; /* WIFI_WKUP_BT */ + }; + + pinctrl_wifi_ctrl: wifictrlgrp { + fsl,pins = + <MX8MP_IOMUXC_SD1_DATA7__GPIO2_IO09 0x1c4>; /* WIFI_WKUP_WLAN */ + }; + + pinctrl_wifi_i2s: wifii2sgrp { + fsl,pins = + <MX8MP_IOMUXC_SAI2_RXFS__GPIO4_IO21 0x1d6>, /* WIFI_TX_SYNC */ + <MX8MP_IOMUXC_SAI5_RXD0__GPIO3_IO21 0x96>, /* WIFI_RX_DATA0 */ + <MX8MP_IOMUXC_SAI5_RXD2__GPIO3_IO23 0x1d6>, /* WIFI_TX_BCLK */ + <MX8MP_IOMUXC_SAI5_RXD3__GPIO3_IO24 0x1d6>; /* WIFI_TX_DATA0 */ + }; + + pinctrl_wifi_pwr_en: wifipwrengrp { + fsl,pins = + <MX8MP_IOMUXC_SD1_STROBE__GPIO2_IO11 0x184>; /* PMIC_EN_WIFI */ + }; +}; diff --git a/arch/arm64/boot/dts/freescale/imx8mp.dtsi b/arch/arm64/boot/dts/freescale/imx8mp.dtsi index 794d75173cf5..d9542dfff83f 100644 --- a/arch/arm64/boot/dts/freescale/imx8mp.dtsi +++ b/arch/arm64/boot/dts/freescale/imx8mp.dtsi @@ -4,6 +4,7 @@ */ #include <dt-bindings/clock/imx8mp-clock.h> +#include <dt-bindings/power/imx8mp-power.h> #include <dt-bindings/gpio/gpio.h> #include <dt-bindings/input/input.h> #include <dt-bindings/interrupt-controller/arm-gic.h> @@ -58,6 +59,9 @@ d-cache-line-size = <64>; d-cache-sets = <128>; next-level-cache = <&A53_L2>; + nvmem-cells = <&cpu_speed_grade>; + nvmem-cell-names = "speed_grade"; + operating-points-v2 = <&a53_opp_table>; #cooling-cells = <2>; }; @@ -75,6 +79,7 @@ d-cache-line-size = <64>; d-cache-sets = <128>; next-level-cache = <&A53_L2>; + operating-points-v2 = <&a53_opp_table>; #cooling-cells = <2>; }; @@ -92,6 +97,7 @@ d-cache-line-size = <64>; d-cache-sets = <128>; next-level-cache = <&A53_L2>; + operating-points-v2 = <&a53_opp_table>; #cooling-cells = <2>; }; @@ -109,6 +115,7 @@ d-cache-line-size = <64>; d-cache-sets = <128>; next-level-cache = <&A53_L2>; + operating-points-v2 = <&a53_opp_table>; #cooling-cells = <2>; }; @@ -121,6 +128,35 @@ }; }; + a53_opp_table: opp-table { + compatible = "operating-points-v2"; + opp-shared; + + opp-1200000000 { + opp-hz = /bits/ 64 <1200000000>; + opp-microvolt = <850000>; + opp-supported-hw = <0x8a0>, <0x7>; + clock-latency-ns = <150000>; + opp-suspend; + }; + + opp-1600000000 { + opp-hz = /bits/ 64 <1600000000>; + opp-microvolt = <950000>; + opp-supported-hw = <0xa0>, <0x7>; + clock-latency-ns = <150000>; + opp-suspend; + }; + + opp-1800000000 { + opp-hz = /bits/ 64 <1800000000>; + opp-microvolt = <1000000>; + opp-supported-hw = <0x20>, <0x3>; + clock-latency-ns = <150000>; + opp-suspend; + }; + }; + osc_32k: clock-osc-32k { compatible = "fixed-clock"; #clock-cells = <0>; @@ -475,6 +511,94 @@ interrupts = <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>; #reset-cells = <1>; }; + + gpc: gpc@303a0000 { + compatible = "fsl,imx8mp-gpc"; + reg = <0x303a0000 0x1000>; + interrupt-parent = <&gic>; + interrupt-controller; + #interrupt-cells = <3>; + + pgc { + #address-cells = <1>; + #size-cells = <0>; + + pgc_mipi_phy1: power-domain@0 { + #power-domain-cells = <0>; + reg = <IMX8MP_POWER_DOMAIN_MIPI_PHY1>; + }; + + pgc_pcie_phy: power-domain@1 { + #power-domain-cells = <0>; + reg = <IMX8MP_POWER_DOMAIN_PCIE_PHY>; + }; + + pgc_usb1_phy: power-domain@2 { + #power-domain-cells = <0>; + reg = <IMX8MP_POWER_DOMAIN_USB1_PHY>; + }; + + pgc_usb2_phy: power-domain@3 { + #power-domain-cells = <0>; + reg = <IMX8MP_POWER_DOMAIN_USB2_PHY>; + }; + + pgc_gpu2d: power-domain@6 { + #power-domain-cells = <0>; + reg = <IMX8MP_POWER_DOMAIN_GPU2D>; + clocks = <&clk IMX8MP_CLK_GPU2D_ROOT>; + power-domains = <&pgc_gpumix>; + }; + + pgc_gpumix: power-domain@7 { + #power-domain-cells = <0>; + reg = <IMX8MP_POWER_DOMAIN_GPUMIX>; + clocks = <&clk IMX8MP_CLK_GPU_ROOT>, + <&clk IMX8MP_CLK_GPU_AHB>; + assigned-clocks = <&clk IMX8MP_CLK_GPU_AXI>, + <&clk IMX8MP_CLK_GPU_AHB>; + assigned-clock-parents = <&clk IMX8MP_SYS_PLL1_800M>, + <&clk IMX8MP_SYS_PLL1_800M>; + assigned-clock-rates = <800000000>, <400000000>; + }; + + pgc_gpu3d: power-domain@9 { + #power-domain-cells = <0>; + reg = <IMX8MP_POWER_DOMAIN_GPU3D>; + clocks = <&clk IMX8MP_CLK_GPU3D_ROOT>, + <&clk IMX8MP_CLK_GPU3D_SHADER_CORE>; + power-domains = <&pgc_gpumix>; + }; + + pgc_mediamix: power-domain@10 { + #power-domain-cells = <0>; + reg = <IMX8MP_POWER_DOMAIN_MEDIAMIX>; + clocks = <&clk IMX8MP_CLK_MEDIA_AXI_ROOT>, + <&clk IMX8MP_CLK_MEDIA_APB_ROOT>; + }; + + pgc_mipi_phy2: power-domain@16 { + #power-domain-cells = <0>; + reg = <IMX8MP_POWER_DOMAIN_MIPI_PHY2>; + }; + + pgc_hsiomix: power-domains@17 { + #power-domain-cells = <0>; + reg = <IMX8MP_POWER_DOMAIN_HSIOMIX>; + clocks = <&clk IMX8MP_CLK_HSIO_AXI>, + <&clk IMX8MP_CLK_HSIO_ROOT>; + assigned-clocks = <&clk IMX8MP_CLK_HSIO_AXI>; + assigned-clock-parents = <&clk IMX8MP_SYS_PLL2_500M>; + assigned-clock-rates = <500000000>; + }; + + pgc_ispdwp: power-domain@18 { + #power-domain-cells = <0>; + reg = <IMX8MP_POWER_DOMAIN_MEDIAMIX_ISPDWP>; + clocks = <&clk IMX8MP_CLK_MEDIA_ISP_DIV>; + }; + }; + }; }; aips2: bus@30400000 { @@ -491,7 +615,7 @@ clocks = <&clk IMX8MP_CLK_PWM1_ROOT>, <&clk IMX8MP_CLK_PWM1_ROOT>; clock-names = "ipg", "per"; - #pwm-cells = <2>; + #pwm-cells = <3>; status = "disabled"; }; @@ -502,7 +626,7 @@ clocks = <&clk IMX8MP_CLK_PWM2_ROOT>, <&clk IMX8MP_CLK_PWM2_ROOT>; clock-names = "ipg", "per"; - #pwm-cells = <2>; + #pwm-cells = <3>; status = "disabled"; }; @@ -513,7 +637,7 @@ clocks = <&clk IMX8MP_CLK_PWM3_ROOT>, <&clk IMX8MP_CLK_PWM3_ROOT>; clock-names = "ipg", "per"; - #pwm-cells = <2>; + #pwm-cells = <3>; status = "disabled"; }; @@ -524,7 +648,7 @@ clocks = <&clk IMX8MP_CLK_PWM4_ROOT>, <&clk IMX8MP_CLK_PWM4_ROOT>; clock-names = "ipg", "per"; - #pwm-cells = <2>; + #pwm-cells = <3>; status = "disabled"; }; @@ -617,6 +741,8 @@ clocks = <&clk IMX8MP_CLK_UART2_ROOT>, <&clk IMX8MP_CLK_UART2_ROOT>; clock-names = "ipg", "per"; + dmas = <&sdma1 24 4 0>, <&sdma1 25 4 0>; + dma-names = "rx", "tx"; status = "disabled"; }; @@ -769,7 +895,7 @@ }; usdhc1: mmc@30b40000 { - compatible = "fsl,imx8mp-usdhc", "fsl,imx7d-usdhc"; + compatible = "fsl,imx8mp-usdhc", "fsl,imx8mm-usdhc", "fsl,imx7d-usdhc"; reg = <0x30b40000 0x10000>; interrupts = <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>; clocks = <&clk IMX8MP_CLK_DUMMY>, @@ -783,7 +909,7 @@ }; usdhc2: mmc@30b50000 { - compatible = "fsl,imx8mp-usdhc", "fsl,imx7d-usdhc"; + compatible = "fsl,imx8mp-usdhc", "fsl,imx8mm-usdhc", "fsl,imx7d-usdhc"; reg = <0x30b50000 0x10000>; interrupts = <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>; clocks = <&clk IMX8MP_CLK_DUMMY>, @@ -797,7 +923,7 @@ }; usdhc3: mmc@30b60000 { - compatible = "fsl,imx8mp-usdhc", "fsl,imx7d-usdhc"; + compatible = "fsl,imx8mp-usdhc", "fsl,imx8mm-usdhc", "fsl,imx7d-usdhc"; reg = <0x30b60000 0x10000>; interrupts = <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>; clocks = <&clk IMX8MP_CLK_DUMMY>, @@ -892,6 +1018,97 @@ }; }; + aips4: bus@32c00000 { + compatible = "fsl,aips-bus", "simple-bus"; + reg = <0x32c00000 0x400000>; + #address-cells = <1>; + #size-cells = <1>; + ranges; + + media_blk_ctrl: blk-ctrl@32ec0000 { + compatible = "fsl,imx8mp-media-blk-ctrl", + "syscon"; + reg = <0x32ec0000 0x10000>; + power-domains = <&pgc_mediamix>, + <&pgc_mipi_phy1>, + <&pgc_mipi_phy1>, + <&pgc_mediamix>, + <&pgc_mediamix>, + <&pgc_mipi_phy2>, + <&pgc_mediamix>, + <&pgc_ispdwp>, + <&pgc_ispdwp>, + <&pgc_mipi_phy2>; + power-domain-names = "bus", "mipi-dsi1", "mipi-csi1", + "lcdif1", "isi", "mipi-csi2", + "lcdif2", "isp", "dwe", + "mipi-dsi2"; + clocks = <&clk IMX8MP_CLK_MEDIA_APB_ROOT>, + <&clk IMX8MP_CLK_MEDIA_AXI_ROOT>, + <&clk IMX8MP_CLK_MEDIA_CAM1_PIX_ROOT>, + <&clk IMX8MP_CLK_MEDIA_CAM2_PIX_ROOT>, + <&clk IMX8MP_CLK_MEDIA_DISP1_PIX_ROOT>, + <&clk IMX8MP_CLK_MEDIA_DISP2_PIX_ROOT>, + <&clk IMX8MP_CLK_MEDIA_ISP_ROOT>, + <&clk IMX8MP_CLK_MEDIA_MIPI_PHY1_REF_ROOT>; + clock-names = "apb", "axi", "cam1", "cam2", + "disp1", "disp2", "isp", "phy"; + + assigned-clocks = <&clk IMX8MP_CLK_MEDIA_AXI>, + <&clk IMX8MP_CLK_MEDIA_APB>; + assigned-clock-parents = <&clk IMX8MP_SYS_PLL2_1000M>, + <&clk IMX8MP_SYS_PLL1_800M>; + assigned-clock-rates = <500000000>, <200000000>; + + #power-domain-cells = <1>; + }; + + hsio_blk_ctrl: blk-ctrl@32f10000 { + compatible = "fsl,imx8mp-hsio-blk-ctrl", "syscon"; + reg = <0x32f10000 0x24>; + clocks = <&clk IMX8MP_CLK_USB_ROOT>, + <&clk IMX8MP_CLK_PCIE_ROOT>; + clock-names = "usb", "pcie"; + power-domains = <&pgc_hsiomix>, <&pgc_hsiomix>, + <&pgc_usb1_phy>, <&pgc_usb2_phy>, + <&pgc_hsiomix>, <&pgc_pcie_phy>; + power-domain-names = "bus", "usb", "usb-phy1", + "usb-phy2", "pcie", "pcie-phy"; + #power-domain-cells = <1>; + }; + }; + + gpu3d: gpu@38000000 { + compatible = "vivante,gc"; + reg = <0x38000000 0x8000>; + interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clk IMX8MP_CLK_GPU3D_ROOT>, + <&clk IMX8MP_CLK_GPU3D_SHADER_CORE>, + <&clk IMX8MP_CLK_GPU_ROOT>, + <&clk IMX8MP_CLK_GPU_AHB>; + clock-names = "core", "shader", "bus", "reg"; + assigned-clocks = <&clk IMX8MP_CLK_GPU3D_CORE>, + <&clk IMX8MP_CLK_GPU3D_SHADER_CORE>; + assigned-clock-parents = <&clk IMX8MP_SYS_PLL1_800M>, + <&clk IMX8MP_SYS_PLL1_800M>; + assigned-clock-rates = <800000000>, <800000000>; + power-domains = <&pgc_gpu3d>; + }; + + gpu2d: gpu@38008000 { + compatible = "vivante,gc"; + reg = <0x38008000 0x8000>; + interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clk IMX8MP_CLK_GPU2D_ROOT>, + <&clk IMX8MP_CLK_GPU_ROOT>, + <&clk IMX8MP_CLK_GPU_AHB>; + clock-names = "core", "bus", "reg"; + assigned-clocks = <&clk IMX8MP_CLK_GPU2D_CORE>; + assigned-clock-parents = <&clk IMX8MP_SYS_PLL1_800M>; + assigned-clock-rates = <800000000>; + power-domains = <&pgc_gpu2d>; + }; + gic: interrupt-controller@38800000 { compatible = "arm,gic-v3"; reg = <0x38800000 0x10000>, @@ -902,6 +1119,12 @@ interrupt-parent = <&gic>; }; + edacmc: memory-controller@3d400000 { + compatible = "snps,ddrc-3.80a"; + reg = <0x3d400000 0x400000>; + interrupts = <GIC_SPI 147 IRQ_TYPE_LEVEL_HIGH>; + }; + ddr-pmu@3d800000 { compatible = "fsl,imx8mp-ddr-pmu", "fsl,imx8m-ddr-pmu"; reg = <0x3d800000 0x400000>; @@ -915,6 +1138,7 @@ clock-names = "phy"; assigned-clocks = <&clk IMX8MP_CLK_USB_PHY_REF>; assigned-clock-parents = <&clk IMX8MP_CLK_24M>; + power-domains = <&hsio_blk_ctrl IMX8MP_HSIOBLK_PD_USB_PHY1>; #phy-cells = <0>; status = "disabled"; }; @@ -927,6 +1151,7 @@ <&clk IMX8MP_CLK_USB_ROOT>; clock-names = "hsio", "suspend"; interrupts = <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>; + power-domains = <&hsio_blk_ctrl IMX8MP_HSIOBLK_PD_USB>; #address-cells = <1>; #size-cells = <1>; dma-ranges = <0x40000000 0x40000000 0xc0000000>; @@ -940,9 +1165,6 @@ <&clk IMX8MP_CLK_USB_CORE_REF>, <&clk IMX8MP_CLK_USB_ROOT>; clock-names = "bus_early", "ref", "suspend"; - assigned-clocks = <&clk IMX8MP_CLK_HSIO_AXI>; - assigned-clock-parents = <&clk IMX8MP_SYS_PLL2_500M>; - assigned-clock-rates = <500000000>; interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>; phys = <&usb3_phy0>, <&usb3_phy0>; phy-names = "usb2-phy", "usb3-phy"; @@ -958,6 +1180,7 @@ clock-names = "phy"; assigned-clocks = <&clk IMX8MP_CLK_USB_PHY_REF>; assigned-clock-parents = <&clk IMX8MP_CLK_24M>; + power-domains = <&hsio_blk_ctrl IMX8MP_HSIOBLK_PD_USB_PHY2>; #phy-cells = <0>; status = "disabled"; }; @@ -970,6 +1193,7 @@ <&clk IMX8MP_CLK_USB_ROOT>; clock-names = "hsio", "suspend"; interrupts = <GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH>; + power-domains = <&hsio_blk_ctrl IMX8MP_HSIOBLK_PD_USB>; #address-cells = <1>; #size-cells = <1>; dma-ranges = <0x40000000 0x40000000 0xc0000000>; @@ -983,9 +1207,6 @@ <&clk IMX8MP_CLK_USB_CORE_REF>, <&clk IMX8MP_CLK_USB_ROOT>; clock-names = "bus_early", "ref", "suspend"; - assigned-clocks = <&clk IMX8MP_CLK_HSIO_AXI>; - assigned-clock-parents = <&clk IMX8MP_SYS_PLL2_500M>; - assigned-clock-rates = <500000000>; interrupts = <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>; phys = <&usb3_phy1>, <&usb3_phy1>; phy-names = "usb2-phy", "usb3-phy"; diff --git a/arch/arm64/boot/dts/freescale/imx8mq-kontron-pitx-imx8m.dts b/arch/arm64/boot/dts/freescale/imx8mq-kontron-pitx-imx8m.dts index 564746d5000d..a91c136797f6 100644 --- a/arch/arm64/boot/dts/freescale/imx8mq-kontron-pitx-imx8m.dts +++ b/arch/arm64/boot/dts/freescale/imx8mq-kontron-pitx-imx8m.dts @@ -311,7 +311,7 @@ &uart3 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_uart3>; - fsl,uart-has-rtscts; + uart-has-rtscts; assigned-clocks = <&clk IMX8MQ_CLK_UART3>; assigned-clock-parents = <&clk IMX8MQ_SYS1_PLL_80M>; status = "okay"; diff --git a/arch/arm64/boot/dts/freescale/imx8mq-librem5-devkit.dts b/arch/arm64/boot/dts/freescale/imx8mq-librem5-devkit.dts index 622f3787a186..b86f188a440d 100644 --- a/arch/arm64/boot/dts/freescale/imx8mq-librem5-devkit.dts +++ b/arch/arm64/boot/dts/freescale/imx8mq-librem5-devkit.dts @@ -18,7 +18,7 @@ backlight_dsi: backlight-dsi { compatible = "pwm-backlight"; /* 200 Hz for the PAM2841 */ - pwms = <&pwm1 0 5000000>; + pwms = <&pwm1 0 5000000 0>; brightness-levels = <0 100>; num-interpolated-steps = <100>; /* Default brightness level (index into the array defined by */ diff --git a/arch/arm64/boot/dts/freescale/imx8mq-librem5-r4.dts b/arch/arm64/boot/dts/freescale/imx8mq-librem5-r4.dts index 30d65bef6939..1056b7981bdb 100644 --- a/arch/arm64/boot/dts/freescale/imx8mq-librem5-r4.dts +++ b/arch/arm64/boot/dts/freescale/imx8mq-librem5-r4.dts @@ -18,6 +18,10 @@ led-max-microamp = <25000>; }; +&lcd_panel { + compatible = "ys,ys57pss36bh5gq"; +}; + &proximity { proximity-near-level = <10>; }; diff --git a/arch/arm64/boot/dts/freescale/imx8mq-librem5.dtsi b/arch/arm64/boot/dts/freescale/imx8mq-librem5.dtsi index 05c16376b4d8..587e55aaa57b 100644 --- a/arch/arm64/boot/dts/freescale/imx8mq-librem5.dtsi +++ b/arch/arm64/boot/dts/freescale/imx8mq-librem5.dtsi @@ -42,6 +42,7 @@ gpios = <&gpio1 17 GPIO_ACTIVE_LOW>; linux,code = <KEY_VOLUMEDOWN>; debounce-interval = <50>; + wakeup-source; }; vol-up { @@ -49,6 +50,7 @@ gpios = <&gpio1 16 GPIO_ACTIVE_LOW>; linux,code = <KEY_VOLUMEUP>; debounce-interval = <50>; + wakeup-source; }; }; @@ -323,15 +325,10 @@ }; partition@30000 { - label = "protected1"; - reg = <0x30000 0x10000>; + label = "firmware"; + reg = <0x30000 0x1d0000>; read-only; }; - - partition@40000 { - label = "rw"; - reg = <0x40000 0x1C0000>; - }; }; }; @@ -387,8 +384,6 @@ fsl,pins = < /* CHRG_INT */ MX8MQ_IOMUXC_NAND_CE2_B_GPIO3_IO3 0x80 - /* CHG_STATUS_B */ - MX8MQ_IOMUXC_NAND_ALE_GPIO3_IO0 0x80 >; }; @@ -1098,7 +1093,7 @@ ti,precharge-current = <130000>; /* uA */ ti,minimum-sys-voltage = <3700000>; /* uV */ ti,boost-voltage = <5000000>; /* uV */ - ti,boost-max-current = <500000>; /* uA */ + ti,boost-max-current = <1500000>; /* uA */ ti,use-vinmin-threshold = <1>; /* enable VINDPM */ ti,vinmin-threshold = <3900000>; /* uV */ monitored-battery = <&bat>; diff --git a/arch/arm64/boot/dts/freescale/imx8mq-mnt-reform2.dts b/arch/arm64/boot/dts/freescale/imx8mq-mnt-reform2.dts index 94a13cb500e6..8956a46788fa 100644 --- a/arch/arm64/boot/dts/freescale/imx8mq-mnt-reform2.dts +++ b/arch/arm64/boot/dts/freescale/imx8mq-mnt-reform2.dts @@ -18,7 +18,7 @@ compatible = "pwm-backlight"; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_backlight>; - pwms = <&pwm2 0 10000>; + pwms = <&pwm2 0 10000 0>; power-supply = <®_main_usb>; enable-gpios = <&gpio1 10 GPIO_ACTIVE_HIGH>; brightness-levels = <0 32 64 128 160 200 255>; diff --git a/arch/arm64/boot/dts/freescale/imx8mq.dtsi b/arch/arm64/boot/dts/freescale/imx8mq.dtsi index 5b3e849f554d..49eadb081b19 100644 --- a/arch/arm64/boot/dts/freescale/imx8mq.dtsi +++ b/arch/arm64/boot/dts/freescale/imx8mq.dtsi @@ -63,6 +63,13 @@ clock-output-names = "osc_27m"; }; + hdmi_phy_27m: clock-hdmi-phy-27m { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <27000000>; + clock-output-names = "hdmi_phy_27m"; + }; + clk_ext1: clock-ext1 { compatible = "fixed-clock"; #clock-cells = <0>; @@ -791,7 +798,7 @@ clocks = <&clk IMX8MQ_CLK_PWM1_ROOT>, <&clk IMX8MQ_CLK_PWM1_ROOT>; clock-names = "ipg", "per"; - #pwm-cells = <2>; + #pwm-cells = <3>; status = "disabled"; }; @@ -802,7 +809,7 @@ clocks = <&clk IMX8MQ_CLK_PWM2_ROOT>, <&clk IMX8MQ_CLK_PWM2_ROOT>; clock-names = "ipg", "per"; - #pwm-cells = <2>; + #pwm-cells = <3>; status = "disabled"; }; @@ -813,7 +820,7 @@ clocks = <&clk IMX8MQ_CLK_PWM3_ROOT>, <&clk IMX8MQ_CLK_PWM3_ROOT>; clock-names = "ipg", "per"; - #pwm-cells = <2>; + #pwm-cells = <3>; status = "disabled"; }; @@ -824,7 +831,7 @@ clocks = <&clk IMX8MQ_CLK_PWM4_ROOT>, <&clk IMX8MQ_CLK_PWM4_ROOT>; clock-names = "ipg", "per"; - #pwm-cells = <2>; + #pwm-cells = <3>; status = "disabled"; }; diff --git a/arch/arm64/boot/dts/freescale/imx8qxp-mek.dts b/arch/arm64/boot/dts/freescale/imx8qxp-mek.dts index 863232a47004..07d8dd8160f6 100644 --- a/arch/arm64/boot/dts/freescale/imx8qxp-mek.dts +++ b/arch/arm64/boot/dts/freescale/imx8qxp-mek.dts @@ -135,6 +135,14 @@ status = "okay"; }; +&mu_m0 { + status = "okay"; +}; + +&mu1_m0 { + status = "okay"; +}; + &scu_key { status = "okay"; }; @@ -196,6 +204,23 @@ status = "okay"; }; +&vpu { + compatible = "nxp,imx8qxp-vpu"; + status = "okay"; +}; + +&vpu_core0 { + reg = <0x2d040000 0x10000>; + memory-region = <&decoder_boot>, <&decoder_rpc>; + status = "okay"; +}; + +&vpu_core1 { + reg = <0x2d050000 0x10000>; + memory-region = <&encoder_boot>, <&encoder_rpc>; + status = "okay"; +}; + &iomuxc { pinctrl_fec1: fec1grp { fsl,pins = < diff --git a/arch/arm64/boot/dts/freescale/imx8qxp.dtsi b/arch/arm64/boot/dts/freescale/imx8qxp.dtsi index dbec7c106e0b..a79ae33cbad2 100644 --- a/arch/arm64/boot/dts/freescale/imx8qxp.dtsi +++ b/arch/arm64/boot/dts/freescale/imx8qxp.dtsi @@ -46,6 +46,9 @@ serial1 = &lpuart1; serial2 = &lpuart2; serial3 = &lpuart3; + vpu_core0 = &vpu_core0; + vpu_core1 = &vpu_core1; + vpu_core2 = &vpu_core2; }; cpus { @@ -162,10 +165,30 @@ #size-cells = <2>; ranges; + decoder_boot: decoder-boot@84000000 { + reg = <0 0x84000000 0 0x2000000>; + no-map; + }; + + encoder_boot: encoder-boot@86000000 { + reg = <0 0x86000000 0 0x200000>; + no-map; + }; + + decoder_rpc: decoder-rpc@92000000 { + reg = <0 0x92000000 0 0x100000>; + no-map; + }; + dsp_reserved: dsp@92400000 { reg = <0 0x92400000 0 0x2000000>; no-map; }; + + encoder_rpc: encoder-rpc@94400000 { + reg = <0 0x94400000 0 0x700000>; + no-map; + }; }; pmu { @@ -287,6 +310,7 @@ /* sorted in register address */ #include "imx8-ss-img.dtsi" + #include "imx8-ss-vpu.dtsi" #include "imx8-ss-adma.dtsi" #include "imx8-ss-conn.dtsi" #include "imx8-ss-ddr.dtsi" diff --git a/arch/arm64/boot/dts/hisilicon/hi3660.dtsi b/arch/arm64/boot/dts/hisilicon/hi3660.dtsi index 8bd6d7e8a474..6b3057a09251 100644 --- a/arch/arm64/boot/dts/hisilicon/hi3660.dtsi +++ b/arch/arm64/boot/dts/hisilicon/hi3660.dtsi @@ -1045,8 +1045,8 @@ clocks = <&crg_ctrl HI3660_CLK_GATE_UFSIO_REF>, <&crg_ctrl HI3660_CLK_GATE_UFSPHY_CFG>; clock-names = "ref_clk", "phy_clk"; - freq-table-hz = <0 0 - 0 0>; + freq-table-hz = <0 0>, + <0 0>; /* offset: 0x84; bit: 12 */ resets = <&crg_rst 0x84 12>; reset-names = "rst"; diff --git a/arch/arm64/boot/dts/hisilicon/hi3670.dtsi b/arch/arm64/boot/dts/hisilicon/hi3670.dtsi index 636c8817df7e..3125c3869c69 100644 --- a/arch/arm64/boot/dts/hisilicon/hi3670.dtsi +++ b/arch/arm64/boot/dts/hisilicon/hi3670.dtsi @@ -671,8 +671,8 @@ clocks = <&crg_ctrl HI3670_CLK_GATE_UFSIO_REF>, <&crg_ctrl HI3670_CLK_GATE_UFS_SUBSYS>; clock-names = "ref_clk", "phy_clk"; - freq-table-hz = <0 0 - 0 0>; + freq-table-hz = <0 0>, + <0 0>; /* offset: 0x84; bit: 12 */ resets = <&crg_rst 0x84 12>; reset-names = "rst"; diff --git a/arch/arm64/boot/dts/intel/socfpga_agilex.dtsi b/arch/arm64/boot/dts/intel/socfpga_agilex.dtsi index c78371703e76..caccb0334ada 100644 --- a/arch/arm64/boot/dts/intel/socfpga_agilex.dtsi +++ b/arch/arm64/boot/dts/intel/socfpga_agilex.dtsi @@ -350,8 +350,6 @@ <GIC_SPI 88 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>; #dma-cells = <1>; - #dma-channels = <8>; - #dma-requests = <32>; resets = <&rst DMA_RESET>, <&rst DMA_OCP_RESET>; reset-names = "dma", "dma-ocp"; clocks = <&clkmgr AGILEX_L4_MAIN_CLK>; diff --git a/arch/arm64/boot/dts/marvell/armada-3720-db.dts b/arch/arm64/boot/dts/marvell/armada-3720-db.dts index 3e5789f37206..bd4e61d5448e 100644 --- a/arch/arm64/boot/dts/marvell/armada-3720-db.dts +++ b/arch/arm64/boot/dts/marvell/armada-3720-db.dts @@ -164,7 +164,7 @@ pinctrl-names = "default"; pinctrl-0 = <&spi_quad_pins>; - m25p80@0 { + flash@0 { compatible = "jedec,spi-nor"; reg = <0>; spi-max-frequency = <108000000>; diff --git a/arch/arm64/boot/dts/marvell/armada-3720-espressobin-ultra.dts b/arch/arm64/boot/dts/marvell/armada-3720-espressobin-ultra.dts index c5eb3604dd5b..070725b81be5 100644 --- a/arch/arm64/boot/dts/marvell/armada-3720-espressobin-ultra.dts +++ b/arch/arm64/boot/dts/marvell/armada-3720-espressobin-ultra.dts @@ -71,10 +71,6 @@ &spi0 { flash@0 { - spi-max-frequency = <108000000>; - spi-rx-bus-width = <4>; - spi-tx-bus-width = <4>; - partitions { compatible = "fixed-partitions"; #address-cells = <1>; @@ -112,18 +108,21 @@ &usb3 { usb-phy = <&usb3_phy>; - status = "disabled"; }; &mdio { extphy: ethernet-phy@1 { reg = <1>; + + reset-gpios = <&gpionb 2 GPIO_ACTIVE_LOW>; }; }; &switch0 { reg = <3>; + reset-gpios = <&gpiosb 23 GPIO_ACTIVE_LOW>; + ports { switch0port1: port@1 { reg = <1>; diff --git a/arch/arm64/boot/dts/marvell/armada-3720-turris-mox.dts b/arch/arm64/boot/dts/marvell/armada-3720-turris-mox.dts index 98c9a3265446..caf9c8529fca 100644 --- a/arch/arm64/boot/dts/marvell/armada-3720-turris-mox.dts +++ b/arch/arm64/boot/dts/marvell/armada-3720-turris-mox.dts @@ -211,7 +211,7 @@ assigned-clock-parents = <&tbg 1>; assigned-clock-rates = <20000000>; - spi-flash@0 { + flash@0 { #address-cells = <1>; #size-cells = <1>; compatible = "jedec,spi-nor"; diff --git a/arch/arm64/boot/dts/marvell/armada-3720-uDPU.dts b/arch/arm64/boot/dts/marvell/armada-3720-uDPU.dts index 95d46e8d081c..a35317d24d6c 100644 --- a/arch/arm64/boot/dts/marvell/armada-3720-uDPU.dts +++ b/arch/arm64/boot/dts/marvell/armada-3720-uDPU.dts @@ -99,7 +99,7 @@ pinctrl-names = "default"; pinctrl-0 = <&spi_quad_pins>; - m25p80@0 { + flash@0 { compatible = "jedec,spi-nor"; reg = <0>; spi-max-frequency = <54000000>; @@ -108,10 +108,15 @@ compatible = "fixed-partitions"; #address-cells = <1>; #size-cells = <1>; - /* only bootloader is located on the SPI */ + partition@0 { - label = "uboot"; - reg = <0 0x400000>; + label = "firmware"; + reg = <0x0 0x180000>; + }; + + partition@180000 { + label = "u-boot-env"; + reg = <0x180000 0x10000>; }; }; }; @@ -148,15 +153,15 @@ scl-gpios = <&gpionb 2 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; sda-gpios = <&gpionb 3 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; - lm75@48 { + nct375@48 { status = "okay"; - compatible = "lm75"; + compatible = "ti,tmp75c"; reg = <0x48>; }; - lm75@49 { + nct375@49 { status = "okay"; - compatible = "lm75"; + compatible = "ti,tmp75c"; reg = <0x49>; }; }; diff --git a/arch/arm64/boot/dts/marvell/armada-37xx.dtsi b/arch/arm64/boot/dts/marvell/armada-37xx.dtsi index 8c8bb97c9d30..df152c72276b 100644 --- a/arch/arm64/boot/dts/marvell/armada-37xx.dtsi +++ b/arch/arm64/boot/dts/marvell/armada-37xx.dtsi @@ -444,7 +444,7 @@ #mbox-cells = <1>; }; - sdhci1: sdhci@d0000 { + sdhci1: mmc@d0000 { compatible = "marvell,armada-3700-sdhci", "marvell,sdhci-xenon"; reg = <0xd0000 0x300>, @@ -455,7 +455,7 @@ status = "disabled"; }; - sdhci0: sdhci@d8000 { + sdhci0: mmc@d8000 { compatible = "marvell,armada-3700-sdhci", "marvell,sdhci-xenon"; reg = <0xd8000 0x300>, diff --git a/arch/arm64/boot/dts/marvell/armada-7040-db.dts b/arch/arm64/boot/dts/marvell/armada-7040-db.dts index cd326fe224ce..5e5baf6beea4 100644 --- a/arch/arm64/boot/dts/marvell/armada-7040-db.dts +++ b/arch/arm64/boot/dts/marvell/armada-7040-db.dts @@ -83,7 +83,7 @@ &spi0 { status = "okay"; - spi-flash@0 { + flash@0 { compatible = "jedec,spi-nor"; reg = <0>; spi-max-frequency = <10000000>; @@ -186,7 +186,7 @@ &cp0_spi1 { status = "okay"; - spi-flash@0 { + flash@0 { compatible = "jedec,spi-nor"; reg = <0x0>; spi-max-frequency = <20000000>; diff --git a/arch/arm64/boot/dts/marvell/armada-7040-mochabin.dts b/arch/arm64/boot/dts/marvell/armada-7040-mochabin.dts index f3b0d57a24a3..39a8e5e99d79 100644 --- a/arch/arm64/boot/dts/marvell/armada-7040-mochabin.dts +++ b/arch/arm64/boot/dts/marvell/armada-7040-mochabin.dts @@ -155,7 +155,7 @@ pinctrl-names = "default"; pinctrl-0 = <&cp0_spi1_pins>; - spi-flash@0 { + flash@0 { #address-cells = <1>; #size-cells = <1>; compatible = "jedec,spi-nor"; diff --git a/arch/arm64/boot/dts/marvell/armada-8040-clearfog-gt-8k.dts b/arch/arm64/boot/dts/marvell/armada-8040-clearfog-gt-8k.dts index 8729c6467303..871f84b4a6ed 100644 --- a/arch/arm64/boot/dts/marvell/armada-8040-clearfog-gt-8k.dts +++ b/arch/arm64/boot/dts/marvell/armada-8040-clearfog-gt-8k.dts @@ -589,7 +589,7 @@ pinctrl-0 = <&cp1_spi1_pins>; status = "okay"; - spi-flash@0 { + flash@0 { compatible = "st,w25q32"; spi-max-frequency = <50000000>; reg = <0>; diff --git a/arch/arm64/boot/dts/marvell/armada-8040-db.dts b/arch/arm64/boot/dts/marvell/armada-8040-db.dts index f2e8e0df8865..92897bd7e6cf 100644 --- a/arch/arm64/boot/dts/marvell/armada-8040-db.dts +++ b/arch/arm64/boot/dts/marvell/armada-8040-db.dts @@ -72,7 +72,7 @@ &spi0 { status = "okay"; - spi-flash@0 { + flash@0 { compatible = "jedec,spi-nor"; reg = <0>; spi-max-frequency = <10000000>; @@ -238,7 +238,7 @@ &cp1_spi1 { status = "okay"; - spi-flash@0 { + flash@0 { compatible = "jedec,spi-nor"; reg = <0x0>; spi-max-frequency = <20000000>; diff --git a/arch/arm64/boot/dts/marvell/armada-8040-mcbin.dtsi b/arch/arm64/boot/dts/marvell/armada-8040-mcbin.dtsi index adbfecc678b5..779cf167c33e 100644 --- a/arch/arm64/boot/dts/marvell/armada-8040-mcbin.dtsi +++ b/arch/arm64/boot/dts/marvell/armada-8040-mcbin.dtsi @@ -360,7 +360,7 @@ pinctrl-0 = <&cp1_spi1_pins>; status = "okay"; - spi-flash@0 { + flash@0 { compatible = "st,w25q32"; spi-max-frequency = <50000000>; reg = <0>; diff --git a/arch/arm64/boot/dts/marvell/armada-8040-puzzle-m801.dts b/arch/arm64/boot/dts/marvell/armada-8040-puzzle-m801.dts index dac85fa748de..74bed79e4f5e 100644 --- a/arch/arm64/boot/dts/marvell/armada-8040-puzzle-m801.dts +++ b/arch/arm64/boot/dts/marvell/armada-8040-puzzle-m801.dts @@ -185,7 +185,7 @@ &spi0 { status = "okay"; - spi-flash@0 { + flash@0 { #address-cells = <0x1>; #size-cells = <0x1>; compatible = "jedec,spi-nor"; diff --git a/arch/arm64/boot/dts/marvell/armada-ap80x.dtsi b/arch/arm64/boot/dts/marvell/armada-ap80x.dtsi index 6614472100c2..a06a0a889c43 100644 --- a/arch/arm64/boot/dts/marvell/armada-ap80x.dtsi +++ b/arch/arm64/boot/dts/marvell/armada-ap80x.dtsi @@ -250,7 +250,7 @@ interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>; }; - ap_sdhci0: sdhci@6e0000 { + ap_sdhci0: mmc@6e0000 { compatible = "marvell,armada-ap806-sdhci"; reg = <0x6e0000 0x300>; interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>; diff --git a/arch/arm64/boot/dts/marvell/armada-cp11x.dtsi b/arch/arm64/boot/dts/marvell/armada-cp11x.dtsi index 3bd2182817fb..d6c0990a267d 100644 --- a/arch/arm64/boot/dts/marvell/armada-cp11x.dtsi +++ b/arch/arm64/boot/dts/marvell/armada-cp11x.dtsi @@ -493,7 +493,7 @@ status = "okay"; }; - CP11X_LABEL(sdhci0): sdhci@780000 { + CP11X_LABEL(sdhci0): mmc@780000 { compatible = "marvell,armada-cp110-sdhci"; reg = <0x780000 0x300>; interrupts = <27 IRQ_TYPE_LEVEL_HIGH>; diff --git a/arch/arm64/boot/dts/marvell/cn9130-crb.dtsi b/arch/arm64/boot/dts/marvell/cn9130-crb.dtsi index d9f9f2c19740..1acd746284dc 100644 --- a/arch/arm64/boot/dts/marvell/cn9130-crb.dtsi +++ b/arch/arm64/boot/dts/marvell/cn9130-crb.dtsi @@ -175,7 +175,7 @@ <0x2000000 0x1000000>; /* CS0 */ status = "okay"; - spi-flash@0 { + flash@0 { #address-cells = <0x1>; #size-cells = <0x1>; compatible = "jedec,spi-nor"; diff --git a/arch/arm64/boot/dts/marvell/cn9130-db.dtsi b/arch/arm64/boot/dts/marvell/cn9130-db.dtsi index c00b69b88bd2..7e20987253a3 100644 --- a/arch/arm64/boot/dts/marvell/cn9130-db.dtsi +++ b/arch/arm64/boot/dts/marvell/cn9130-db.dtsi @@ -310,7 +310,7 @@ pinctrl-0 = <&cp0_spi0_pins>; reg = <0x700680 0x50>; - spi-flash@0 { + flash@0 { #address-cells = <0x1>; #size-cells = <0x1>; compatible = "jedec,spi-nor"; diff --git a/arch/arm64/boot/dts/marvell/cn9131-db.dtsi b/arch/arm64/boot/dts/marvell/cn9131-db.dtsi index f995b1bcda01..b7fc241a228c 100644 --- a/arch/arm64/boot/dts/marvell/cn9131-db.dtsi +++ b/arch/arm64/boot/dts/marvell/cn9131-db.dtsi @@ -137,7 +137,7 @@ pinctrl-0 = <&cp1_spi0_pins>; reg = <0x700680 0x50>; - spi-flash@0 { + flash@0 { #address-cells = <0x1>; #size-cells = <0x1>; compatible = "jedec,spi-nor"; diff --git a/arch/arm64/boot/dts/mediatek/Makefile b/arch/arm64/boot/dts/mediatek/Makefile index 8c1e18032f9f..c7d4636a2cb7 100644 --- a/arch/arm64/boot/dts/mediatek/Makefile +++ b/arch/arm64/boot/dts/mediatek/Makefile @@ -38,4 +38,6 @@ dtb-$(CONFIG_ARCH_MEDIATEK) += mt8183-kukui-krane-sku0.dtb dtb-$(CONFIG_ARCH_MEDIATEK) += mt8183-kukui-krane-sku176.dtb dtb-$(CONFIG_ARCH_MEDIATEK) += mt8183-pumpkin.dtb dtb-$(CONFIG_ARCH_MEDIATEK) += mt8192-evb.dtb +dtb-$(CONFIG_ARCH_MEDIATEK) += mt8195-demo.dtb +dtb-$(CONFIG_ARCH_MEDIATEK) += mt8195-evb.dtb dtb-$(CONFIG_ARCH_MEDIATEK) += mt8516-pumpkin.dtb diff --git a/arch/arm64/boot/dts/mediatek/mt2712e.dtsi b/arch/arm64/boot/dts/mediatek/mt2712e.dtsi index a27b7628c5f7..623eb3beabf2 100644 --- a/arch/arm64/boot/dts/mediatek/mt2712e.dtsi +++ b/arch/arm64/boot/dts/mediatek/mt2712e.dtsi @@ -19,7 +19,7 @@ #address-cells = <2>; #size-cells = <2>; - cluster0_opp: opp_table0 { + cluster0_opp: opp-table-0 { compatible = "operating-points-v2"; opp-shared; opp00 { @@ -36,7 +36,7 @@ }; }; - cluster1_opp: opp_table1 { + cluster1_opp: opp-table-1 { compatible = "operating-points-v2"; opp-shared; opp00 { @@ -329,8 +329,8 @@ interrupts = <GIC_SPI 147 IRQ_TYPE_LEVEL_LOW>; clocks = <&infracfg CLK_INFRA_M4U>; clock-names = "bclk"; - mediatek,larbs = <&larb0 &larb1 &larb2 - &larb3 &larb6>; + mediatek,larbs = <&larb0>, <&larb1>, <&larb2>, + <&larb3>, <&larb6>; #iommu-cells = <1>; }; @@ -346,7 +346,7 @@ interrupts = <GIC_SPI 145 IRQ_TYPE_LEVEL_LOW>; clocks = <&infracfg CLK_INFRA_M4U>; clock-names = "bclk"; - mediatek,larbs = <&larb4 &larb5 &larb7>; + mediatek,larbs = <&larb4>, <&larb5>, <&larb7>; #iommu-cells = <1>; }; diff --git a/arch/arm64/boot/dts/mediatek/mt6359.dtsi b/arch/arm64/boot/dts/mediatek/mt6359.dtsi new file mode 100644 index 000000000000..df3e822232d3 --- /dev/null +++ b/arch/arm64/boot/dts/mediatek/mt6359.dtsi @@ -0,0 +1,298 @@ +// SPDX-License-Identifier: (GPL-2.0 OR MIT) +/* + * Copyright (C) 2022 MediaTek Inc. + */ + +&pwrap { + pmic: pmic { + compatible = "mediatek,mt6359"; + interrupt-controller; + #interrupt-cells = <2>; + + mt6359codec: mt6359codec { + }; + + regulators { + mt6359_vs1_buck_reg: buck_vs1 { + regulator-name = "vs1"; + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <2200000>; + regulator-enable-ramp-delay = <0>; + regulator-always-on; + }; + mt6359_vgpu11_buck_reg: buck_vgpu11 { + regulator-name = "vgpu11"; + regulator-min-microvolt = <400000>; + regulator-max-microvolt = <1193750>; + regulator-ramp-delay = <5000>; + regulator-enable-ramp-delay = <200>; + regulator-allowed-modes = <0 1 2>; + }; + mt6359_vmodem_buck_reg: buck_vmodem { + regulator-name = "vmodem"; + regulator-min-microvolt = <400000>; + regulator-max-microvolt = <1100000>; + regulator-ramp-delay = <10760>; + regulator-enable-ramp-delay = <200>; + }; + mt6359_vpu_buck_reg: buck_vpu { + regulator-name = "vpu"; + regulator-min-microvolt = <400000>; + regulator-max-microvolt = <1193750>; + regulator-ramp-delay = <5000>; + regulator-enable-ramp-delay = <200>; + regulator-allowed-modes = <0 1 2>; + }; + mt6359_vcore_buck_reg: buck_vcore { + regulator-name = "vcore"; + regulator-min-microvolt = <400000>; + regulator-max-microvolt = <1300000>; + regulator-ramp-delay = <5000>; + regulator-enable-ramp-delay = <200>; + regulator-allowed-modes = <0 1 2>; + }; + mt6359_vs2_buck_reg: buck_vs2 { + regulator-name = "vs2"; + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <1600000>; + regulator-enable-ramp-delay = <0>; + regulator-always-on; + }; + mt6359_vpa_buck_reg: buck_vpa { + regulator-name = "vpa"; + regulator-min-microvolt = <500000>; + regulator-max-microvolt = <3650000>; + regulator-enable-ramp-delay = <300>; + }; + mt6359_vproc2_buck_reg: buck_vproc2 { + regulator-name = "vproc2"; + regulator-min-microvolt = <400000>; + regulator-max-microvolt = <1193750>; + regulator-ramp-delay = <7500>; + regulator-enable-ramp-delay = <200>; + regulator-allowed-modes = <0 1 2>; + }; + mt6359_vproc1_buck_reg: buck_vproc1 { + regulator-name = "vproc1"; + regulator-min-microvolt = <400000>; + regulator-max-microvolt = <1193750>; + regulator-ramp-delay = <7500>; + regulator-enable-ramp-delay = <200>; + regulator-allowed-modes = <0 1 2>; + }; + mt6359_vcore_sshub_buck_reg: buck_vcore_sshub { + regulator-name = "vcore_sshub"; + regulator-min-microvolt = <400000>; + regulator-max-microvolt = <1193750>; + }; + mt6359_vgpu11_sshub_buck_reg: buck_vgpu11_sshub { + regulator-name = "vgpu11_sshub"; + regulator-min-microvolt = <400000>; + regulator-max-microvolt = <1193750>; + }; + mt6359_vaud18_ldo_reg: ldo_vaud18 { + regulator-name = "vaud18"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-enable-ramp-delay = <240>; + }; + mt6359_vsim1_ldo_reg: ldo_vsim1 { + regulator-name = "vsim1"; + regulator-min-microvolt = <1700000>; + regulator-max-microvolt = <3100000>; + }; + mt6359_vibr_ldo_reg: ldo_vibr { + regulator-name = "vibr"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <3300000>; + }; + mt6359_vrf12_ldo_reg: ldo_vrf12 { + regulator-name = "vrf12"; + regulator-min-microvolt = <1100000>; + regulator-max-microvolt = <1300000>; + }; + mt6359_vusb_ldo_reg: ldo_vusb { + regulator-name = "vusb"; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + regulator-enable-ramp-delay = <960>; + regulator-always-on; + }; + mt6359_vsram_proc2_ldo_reg: ldo_vsram_proc2 { + regulator-name = "vsram_proc2"; + regulator-min-microvolt = <500000>; + regulator-max-microvolt = <1293750>; + regulator-ramp-delay = <7500>; + regulator-enable-ramp-delay = <240>; + regulator-always-on; + }; + mt6359_vio18_ldo_reg: ldo_vio18 { + regulator-name = "vio18"; + regulator-min-microvolt = <1700000>; + regulator-max-microvolt = <1900000>; + regulator-enable-ramp-delay = <960>; + regulator-always-on; + }; + mt6359_vcamio_ldo_reg: ldo_vcamio { + regulator-name = "vcamio"; + regulator-min-microvolt = <1700000>; + regulator-max-microvolt = <1900000>; + }; + mt6359_vcn18_ldo_reg: ldo_vcn18 { + regulator-name = "vcn18"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-enable-ramp-delay = <240>; + }; + mt6359_vfe28_ldo_reg: ldo_vfe28 { + regulator-name = "vfe28"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + regulator-enable-ramp-delay = <120>; + }; + mt6359_vcn13_ldo_reg: ldo_vcn13 { + regulator-name = "vcn13"; + regulator-min-microvolt = <900000>; + regulator-max-microvolt = <1300000>; + }; + mt6359_vcn33_1_bt_ldo_reg: ldo_vcn33_1_bt { + regulator-name = "vcn33_1_bt"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <3500000>; + }; + mt6359_vcn33_1_wifi_ldo_reg: ldo_vcn33_1_wifi { + regulator-name = "vcn33_1_wifi"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <3500000>; + }; + mt6359_vaux18_ldo_reg: ldo_vaux18 { + regulator-name = "vaux18"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-enable-ramp-delay = <240>; + regulator-always-on; + }; + mt6359_vsram_others_ldo_reg: ldo_vsram_others { + regulator-name = "vsram_others"; + regulator-min-microvolt = <500000>; + regulator-max-microvolt = <1293750>; + regulator-ramp-delay = <5000>; + regulator-enable-ramp-delay = <240>; + }; + mt6359_vefuse_ldo_reg: ldo_vefuse { + regulator-name = "vefuse"; + regulator-min-microvolt = <1700000>; + regulator-max-microvolt = <2000000>; + }; + mt6359_vxo22_ldo_reg: ldo_vxo22 { + regulator-name = "vxo22"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <2200000>; + regulator-always-on; + }; + mt6359_vrfck_ldo_reg: ldo_vrfck { + regulator-name = "vrfck"; + regulator-min-microvolt = <1500000>; + regulator-max-microvolt = <1700000>; + }; + mt6359_vrfck_1_ldo_reg: ldo_vrfck_1 { + regulator-name = "vrfck"; + regulator-min-microvolt = <1240000>; + regulator-max-microvolt = <1600000>; + }; + mt6359_vbif28_ldo_reg: ldo_vbif28 { + regulator-name = "vbif28"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + regulator-enable-ramp-delay = <240>; + }; + mt6359_vio28_ldo_reg: ldo_vio28 { + regulator-name = "vio28"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + mt6359_vemc_ldo_reg: ldo_vemc { + regulator-name = "vemc"; + regulator-min-microvolt = <2900000>; + regulator-max-microvolt = <3300000>; + }; + mt6359_vemc_1_ldo_reg: ldo_vemc_1 { + regulator-name = "vemc"; + regulator-min-microvolt = <2500000>; + regulator-max-microvolt = <3300000>; + }; + mt6359_vcn33_2_bt_ldo_reg: ldo_vcn33_2_bt { + regulator-name = "vcn33_2_bt"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <3500000>; + }; + mt6359_vcn33_2_wifi_ldo_reg: ldo_vcn33_2_wifi { + regulator-name = "vcn33_2_wifi"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <3500000>; + }; + mt6359_va12_ldo_reg: ldo_va12 { + regulator-name = "va12"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1300000>; + regulator-always-on; + }; + mt6359_va09_ldo_reg: ldo_va09 { + regulator-name = "va09"; + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <1200000>; + }; + mt6359_vrf18_ldo_reg: ldo_vrf18 { + regulator-name = "vrf18"; + regulator-min-microvolt = <1700000>; + regulator-max-microvolt = <1810000>; + }; + mt6359_vsram_md_ldo_reg: ldo_vsram_md { + regulator-name = "vsram_md"; + regulator-min-microvolt = <500000>; + regulator-max-microvolt = <1293750>; + regulator-ramp-delay = <10760>; + regulator-enable-ramp-delay = <240>; + }; + mt6359_vufs_ldo_reg: ldo_vufs { + regulator-name = "vufs"; + regulator-min-microvolt = <1700000>; + regulator-max-microvolt = <1900000>; + }; + mt6359_vm18_ldo_reg: ldo_vm18 { + regulator-name = "vm18"; + regulator-min-microvolt = <1700000>; + regulator-max-microvolt = <1900000>; + regulator-always-on; + }; + mt6359_vbbck_ldo_reg: ldo_vbbck { + regulator-name = "vbbck"; + regulator-min-microvolt = <1100000>; + regulator-max-microvolt = <1200000>; + }; + mt6359_vsram_proc1_ldo_reg: ldo_vsram_proc1 { + regulator-name = "vsram_proc1"; + regulator-min-microvolt = <500000>; + regulator-max-microvolt = <1293750>; + regulator-ramp-delay = <7500>; + regulator-enable-ramp-delay = <240>; + regulator-always-on; + }; + mt6359_vsim2_ldo_reg: ldo_vsim2 { + regulator-name = "vsim2"; + regulator-min-microvolt = <1700000>; + regulator-max-microvolt = <3100000>; + }; + mt6359_vsram_others_sshub_ldo: ldo_vsram_others_sshub { + regulator-name = "vsram_others_sshub"; + regulator-min-microvolt = <500000>; + regulator-max-microvolt = <1293750>; + }; + }; + + mt6359rtc: mt6359rtc { + compatible = "mediatek,mt6358-rtc"; + }; + }; +}; diff --git a/arch/arm64/boot/dts/mediatek/mt7622.dtsi b/arch/arm64/boot/dts/mediatek/mt7622.dtsi index f232f8baf4e8..dbcee8b4d8d8 100644 --- a/arch/arm64/boot/dts/mediatek/mt7622.dtsi +++ b/arch/arm64/boot/dts/mediatek/mt7622.dtsi @@ -80,6 +80,7 @@ enable-method = "psci"; clock-frequency = <1300000000>; cci-control-port = <&cci_control2>; + next-level-cache = <&L2>; }; cpu1: cpu@1 { @@ -94,6 +95,12 @@ enable-method = "psci"; clock-frequency = <1300000000>; cci-control-port = <&cci_control2>; + next-level-cache = <&L2>; + }; + + L2: l2-cache { + compatible = "cache"; + cache-level = <2>; }; }; @@ -545,6 +552,18 @@ status = "disabled"; }; + snfi: spi@1100d000 { + compatible = "mediatek,mt7622-snand"; + reg = <0 0x1100d000 0 0x1000>; + interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_LOW>; + clocks = <&pericfg CLK_PERI_NFI_PD>, <&pericfg CLK_PERI_SNFI_PD>; + clock-names = "nfi_clk", "pad_clk"; + nand-ecc-engine = <&bch>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + bch: ecc@1100e000 { compatible = "mediatek,mt7622-ecc"; reg = <0 0x1100e000 0 0x1000>; @@ -922,6 +941,7 @@ clock-names = "hsdma"; power-domains = <&scpsys MT7622_POWER_DOMAIN_ETHSYS>; #dma-cells = <1>; + dma-requests = <3>; }; pcie_mirror: pcie-mirror@10000400 { diff --git a/arch/arm64/boot/dts/mediatek/mt8167.dtsi b/arch/arm64/boot/dts/mediatek/mt8167.dtsi index 9029051624a6..54655f2feb04 100644 --- a/arch/arm64/boot/dts/mediatek/mt8167.dtsi +++ b/arch/arm64/boot/dts/mediatek/mt8167.dtsi @@ -174,7 +174,7 @@ iommu: m4u@10203000 { compatible = "mediatek,mt8167-m4u"; reg = <0 0x10203000 0 0x1000>; - mediatek,larbs = <&larb0 &larb1 &larb2>; + mediatek,larbs = <&larb0>, <&larb1>, <&larb2>; interrupts = <GIC_SPI 121 IRQ_TYPE_LEVEL_LOW>; #iommu-cells = <1>; }; diff --git a/arch/arm64/boot/dts/mediatek/mt8173.dtsi b/arch/arm64/boot/dts/mediatek/mt8173.dtsi index 2b7d331a4588..40d7b47fc52e 100644 --- a/arch/arm64/boot/dts/mediatek/mt8173.dtsi +++ b/arch/arm64/boot/dts/mediatek/mt8173.dtsi @@ -57,7 +57,7 @@ serial3 = &uart3; }; - cluster0_opp: opp_table0 { + cluster0_opp: opp-table-0 { compatible = "operating-points-v2"; opp-shared; opp-507000000 { @@ -94,7 +94,7 @@ }; }; - cluster1_opp: opp_table1 { + cluster1_opp: opp-table-1 { compatible = "operating-points-v2"; opp-shared; opp-507000000 { @@ -273,7 +273,7 @@ }; thermal-zones { - cpu_thermal: cpu_thermal { + cpu_thermal: cpu-thermal { polling-delay-passive = <1000>; /* milliseconds */ polling-delay = <1000>; /* milliseconds */ @@ -588,8 +588,8 @@ interrupts = <GIC_SPI 139 IRQ_TYPE_LEVEL_LOW>; clocks = <&infracfg CLK_INFRA_M4U>; clock-names = "bclk"; - mediatek,larbs = <&larb0 &larb1 &larb2 - &larb3 &larb4 &larb5>; + mediatek,larbs = <&larb0>, <&larb1>, <&larb2>, + <&larb3>, <&larb4>, <&larb5>; #iommu-cells = <1>; }; @@ -1010,7 +1010,6 @@ <&mmsys CLK_MM_MUTEX_32K>; power-domains = <&spm MT8173_POWER_DOMAIN_MM>; iommus = <&iommu M4U_PORT_MDP_RDMA0>; - mediatek,larb = <&larb0>; mediatek,vpu = <&vpu>; }; @@ -1021,7 +1020,6 @@ <&mmsys CLK_MM_MUTEX_32K>; power-domains = <&spm MT8173_POWER_DOMAIN_MM>; iommus = <&iommu M4U_PORT_MDP_RDMA1>; - mediatek,larb = <&larb4>; }; mdp_rsz0: rsz@14003000 { @@ -1051,7 +1049,6 @@ clocks = <&mmsys CLK_MM_MDP_WDMA>; power-domains = <&spm MT8173_POWER_DOMAIN_MM>; iommus = <&iommu M4U_PORT_MDP_WDMA>; - mediatek,larb = <&larb0>; }; mdp_wrot0: wrot@14007000 { @@ -1060,7 +1057,6 @@ clocks = <&mmsys CLK_MM_MDP_WROT0>; power-domains = <&spm MT8173_POWER_DOMAIN_MM>; iommus = <&iommu M4U_PORT_MDP_WROT0>; - mediatek,larb = <&larb0>; }; mdp_wrot1: wrot@14008000 { @@ -1069,7 +1065,6 @@ clocks = <&mmsys CLK_MM_MDP_WROT1>; power-domains = <&spm MT8173_POWER_DOMAIN_MM>; iommus = <&iommu M4U_PORT_MDP_WROT1>; - mediatek,larb = <&larb4>; }; ovl0: ovl@1400c000 { @@ -1079,7 +1074,6 @@ power-domains = <&spm MT8173_POWER_DOMAIN_MM>; clocks = <&mmsys CLK_MM_DISP_OVL0>; iommus = <&iommu M4U_PORT_DISP_OVL0>; - mediatek,larb = <&larb0>; mediatek,gce-client-reg = <&gce SUBSYS_1400XXXX 0xc000 0x1000>; }; @@ -1090,7 +1084,6 @@ power-domains = <&spm MT8173_POWER_DOMAIN_MM>; clocks = <&mmsys CLK_MM_DISP_OVL1>; iommus = <&iommu M4U_PORT_DISP_OVL1>; - mediatek,larb = <&larb4>; mediatek,gce-client-reg = <&gce SUBSYS_1400XXXX 0xd000 0x1000>; }; @@ -1101,7 +1094,6 @@ power-domains = <&spm MT8173_POWER_DOMAIN_MM>; clocks = <&mmsys CLK_MM_DISP_RDMA0>; iommus = <&iommu M4U_PORT_DISP_RDMA0>; - mediatek,larb = <&larb0>; mediatek,gce-client-reg = <&gce SUBSYS_1400XXXX 0xe000 0x1000>; }; @@ -1112,7 +1104,6 @@ power-domains = <&spm MT8173_POWER_DOMAIN_MM>; clocks = <&mmsys CLK_MM_DISP_RDMA1>; iommus = <&iommu M4U_PORT_DISP_RDMA1>; - mediatek,larb = <&larb4>; mediatek,gce-client-reg = <&gce SUBSYS_1400XXXX 0xf000 0x1000>; }; @@ -1123,7 +1114,6 @@ power-domains = <&spm MT8173_POWER_DOMAIN_MM>; clocks = <&mmsys CLK_MM_DISP_RDMA2>; iommus = <&iommu M4U_PORT_DISP_RDMA2>; - mediatek,larb = <&larb4>; mediatek,gce-client-reg = <&gce SUBSYS_1401XXXX 0 0x1000>; }; @@ -1134,7 +1124,6 @@ power-domains = <&spm MT8173_POWER_DOMAIN_MM>; clocks = <&mmsys CLK_MM_DISP_WDMA0>; iommus = <&iommu M4U_PORT_DISP_WDMA0>; - mediatek,larb = <&larb0>; mediatek,gce-client-reg = <&gce SUBSYS_1401XXXX 0x1000 0x1000>; }; @@ -1145,7 +1134,6 @@ power-domains = <&spm MT8173_POWER_DOMAIN_MM>; clocks = <&mmsys CLK_MM_DISP_WDMA1>; iommus = <&iommu M4U_PORT_DISP_WDMA1>; - mediatek,larb = <&larb4>; mediatek,gce-client-reg = <&gce SUBSYS_1401XXXX 0x2000 0x1000>; }; @@ -1290,6 +1278,7 @@ interrupts = <GIC_SPI 169 IRQ_TYPE_LEVEL_LOW>; power-domains = <&spm MT8173_POWER_DOMAIN_MM>; clocks = <&mmsys CLK_MM_MUTEX_32K>; + mediatek,gce-client-reg = <&gce SUBSYS_1402XXXX 0 0x1000>; mediatek,gce-events = <CMDQ_EVENT_MUTEX0_STREAM_EOF>, <CMDQ_EVENT_MUTEX1_STREAM_EOF>; }; @@ -1399,7 +1388,6 @@ <0 0x16027800 0 0x800>, /* VDEC_HWB */ <0 0x16028400 0 0x400>; /* VDEC_HWG */ interrupts = <GIC_SPI 204 IRQ_TYPE_LEVEL_LOW>; - mediatek,larb = <&larb1>; iommus = <&iommu M4U_PORT_HW_VDEC_MC_EXT>, <&iommu M4U_PORT_HW_VDEC_PP_EXT>, <&iommu M4U_PORT_HW_VDEC_AVC_MV_EXT>, @@ -1467,7 +1455,6 @@ compatible = "mediatek,mt8173-vcodec-enc"; reg = <0 0x18002000 0 0x1000>; /* VENC_SYS */ interrupts = <GIC_SPI 198 IRQ_TYPE_LEVEL_LOW>; - mediatek,larb = <&larb3>; iommus = <&iommu M4U_PORT_VENC_RCPU>, <&iommu M4U_PORT_VENC_REC>, <&iommu M4U_PORT_VENC_BSDMA>, @@ -1484,6 +1471,7 @@ clock-names = "venc_sel"; assigned-clocks = <&topckgen CLK_TOP_VENC_SEL>; assigned-clock-parents = <&topckgen CLK_TOP_VCODECPLL>; + power-domains = <&scpsys MT8173_POWER_DOMAIN_VENC>; }; jpegdec: jpegdec@18004000 { @@ -1495,7 +1483,6 @@ clock-names = "jpgdec-smi", "jpgdec"; power-domains = <&spm MT8173_POWER_DOMAIN_VENC>; - mediatek,larb = <&larb3>; iommus = <&iommu M4U_PORT_JPGDEC_WDMA>, <&iommu M4U_PORT_JPGDEC_BSDMA>; }; @@ -1529,13 +1516,13 @@ <&iommu M4U_PORT_VENC_CUR_CHROMA_SET2>, <&iommu M4U_PORT_VENC_REF_LUMA_SET2>, <&iommu M4U_PORT_VENC_REC_CHROMA_SET2>; - mediatek,larb = <&larb5>; mediatek,vpu = <&vpu>; clocks = <&topckgen CLK_TOP_VENC_LT_SEL>; clock-names = "venc_lt_sel"; assigned-clocks = <&topckgen CLK_TOP_VENC_LT_SEL>; assigned-clock-parents = <&topckgen CLK_TOP_VCODECPLL_370P5>; + power-domains = <&scpsys MT8173_POWER_DOMAIN_VENC_LT>; }; }; }; diff --git a/arch/arm64/boot/dts/mediatek/mt8183-kukui-jacuzzi.dtsi b/arch/arm64/boot/dts/mediatek/mt8183-kukui-jacuzzi.dtsi index 8f7bf33f607d..2d7a193272ae 100644 --- a/arch/arm64/boot/dts/mediatek/mt8183-kukui-jacuzzi.dtsi +++ b/arch/arm64/boot/dts/mediatek/mt8183-kukui-jacuzzi.dtsi @@ -92,7 +92,7 @@ }; &cros_ec { - cros_ec_pwm: ec-pwm { + cros_ec_pwm: pwm { compatible = "google,cros-ec-pwm"; #pwm-cells = <1>; status = "disabled"; diff --git a/arch/arm64/boot/dts/mediatek/mt8183-kukui.dtsi b/arch/arm64/boot/dts/mediatek/mt8183-kukui.dtsi index 0f9480f91261..8d5bf73a9099 100644 --- a/arch/arm64/boot/dts/mediatek/mt8183-kukui.dtsi +++ b/arch/arm64/boot/dts/mediatek/mt8183-kukui.dtsi @@ -849,7 +849,7 @@ mediatek,pad-select = <0>; status = "okay"; - w25q64dw: spi-flash@0 { + w25q64dw: flash@0 { compatible = "winbond,w25q64dw", "jedec,spi-nor"; reg = <0>; spi-max-frequency = <25000000>; diff --git a/arch/arm64/boot/dts/mediatek/mt8183-pumpkin.dts b/arch/arm64/boot/dts/mediatek/mt8183-pumpkin.dts index ee912825cfc6..afeb5cd37826 100644 --- a/arch/arm64/boot/dts/mediatek/mt8183-pumpkin.dts +++ b/arch/arm64/boot/dts/mediatek/mt8183-pumpkin.dts @@ -55,7 +55,7 @@ }; }; - ntc { + thermistor { compatible = "murata,ncp03wf104"; pullup-uv = <1800000>; pullup-ohm = <390000>; diff --git a/arch/arm64/boot/dts/mediatek/mt8183.dtsi b/arch/arm64/boot/dts/mediatek/mt8183.dtsi index 4b08691ed39e..01e650251928 100644 --- a/arch/arm64/boot/dts/mediatek/mt8183.dtsi +++ b/arch/arm64/boot/dts/mediatek/mt8183.dtsi @@ -197,7 +197,7 @@ }; }; - gpu_opp_table: opp_table0 { + gpu_opp_table: opp-table-0 { compatible = "operating-points-v2"; opp-shared; @@ -682,8 +682,8 @@ compatible = "mediatek,mt8183-m4u"; reg = <0 0x10205000 0 0x1000>; interrupts = <GIC_SPI 166 IRQ_TYPE_LEVEL_LOW>; - mediatek,larbs = <&larb0 &larb1 &larb2 &larb3 - &larb4 &larb5 &larb6>; + mediatek,larbs = <&larb0>, <&larb1>, <&larb2>, <&larb3>, + <&larb4>, <&larb5>, <&larb6>; #iommu-cells = <1>; }; @@ -823,7 +823,7 @@ }; thermal_zones: thermal-zones { - cpu_thermal: cpu_thermal { + cpu_thermal: cpu-thermal { polling-delay-passive = <100>; polling-delay = <500>; thermal-sensors = <&thermal 0>; @@ -1396,7 +1396,6 @@ power-domains = <&spm MT8183_POWER_DOMAIN_DISP>; clocks = <&mmsys CLK_MM_DISP_OVL0>; iommus = <&iommu M4U_PORT_DISP_OVL0>; - mediatek,larb = <&larb0>; mediatek,gce-client-reg = <&gce SUBSYS_1400XXXX 0x8000 0x1000>; }; @@ -1407,7 +1406,6 @@ power-domains = <&spm MT8183_POWER_DOMAIN_DISP>; clocks = <&mmsys CLK_MM_DISP_OVL0_2L>; iommus = <&iommu M4U_PORT_DISP_2L_OVL0_LARB0>; - mediatek,larb = <&larb0>; mediatek,gce-client-reg = <&gce SUBSYS_1400XXXX 0x9000 0x1000>; }; @@ -1418,7 +1416,6 @@ power-domains = <&spm MT8183_POWER_DOMAIN_DISP>; clocks = <&mmsys CLK_MM_DISP_OVL1_2L>; iommus = <&iommu M4U_PORT_DISP_2L_OVL1_LARB0>; - mediatek,larb = <&larb0>; mediatek,gce-client-reg = <&gce SUBSYS_1400XXXX 0xa000 0x1000>; }; @@ -1429,7 +1426,6 @@ power-domains = <&spm MT8183_POWER_DOMAIN_DISP>; clocks = <&mmsys CLK_MM_DISP_RDMA0>; iommus = <&iommu M4U_PORT_DISP_RDMA0>; - mediatek,larb = <&larb0>; mediatek,rdma-fifo-size = <5120>; mediatek,gce-client-reg = <&gce SUBSYS_1400XXXX 0xb000 0x1000>; }; @@ -1441,7 +1437,6 @@ power-domains = <&spm MT8183_POWER_DOMAIN_DISP>; clocks = <&mmsys CLK_MM_DISP_RDMA1>; iommus = <&iommu M4U_PORT_DISP_RDMA1>; - mediatek,larb = <&larb0>; mediatek,rdma-fifo-size = <2048>; mediatek,gce-client-reg = <&gce SUBSYS_1400XXXX 0xc000 0x1000>; }; @@ -1466,8 +1461,7 @@ }; aal0: aal@14010000 { - compatible = "mediatek,mt8183-disp-aal", - "mediatek,mt8173-disp-aal"; + compatible = "mediatek,mt8183-disp-aal"; reg = <0 0x14010000 0 0x1000>; interrupts = <GIC_SPI 233 IRQ_TYPE_LEVEL_LOW>; power-domains = <&spm MT8183_POWER_DOMAIN_DISP>; @@ -1598,7 +1592,6 @@ compatible = "mediatek,mt8183-jpgenc", "mediatek,mtk-jpgenc"; reg = <0 0x17030000 0 0x1000>; interrupts = <GIC_SPI 249 IRQ_TYPE_LEVEL_LOW>; - mediatek,larb = <&larb4>; iommus = <&iommu M4U_PORT_JPGENC_RDMA>, <&iommu M4U_PORT_JPGENC_BSDMA>; power-domains = <&spm MT8183_POWER_DOMAIN_VENC>; diff --git a/arch/arm64/boot/dts/mediatek/mt8192-evb.dts b/arch/arm64/boot/dts/mediatek/mt8192-evb.dts index 0205837fa698..808be492e970 100644 --- a/arch/arm64/boot/dts/mediatek/mt8192-evb.dts +++ b/arch/arm64/boot/dts/mediatek/mt8192-evb.dts @@ -5,6 +5,7 @@ */ /dts-v1/; #include "mt8192.dtsi" +#include "mt6359.dtsi" / { model = "MediaTek MT8192 evaluation board"; diff --git a/arch/arm64/boot/dts/mediatek/mt8192.dtsi b/arch/arm64/boot/dts/mediatek/mt8192.dtsi index 411feb294613..733aec2e7f77 100644 --- a/arch/arm64/boot/dts/mediatek/mt8192.dtsi +++ b/arch/arm64/boot/dts/mediatek/mt8192.dtsi @@ -8,7 +8,9 @@ #include <dt-bindings/clock/mt8192-clk.h> #include <dt-bindings/interrupt-controller/arm-gic.h> #include <dt-bindings/interrupt-controller/irq.h> +#include <dt-bindings/memory/mt8192-larb-port.h> #include <dt-bindings/pinctrl/mt8192-pinfunc.h> +#include <dt-bindings/phy/phy.h> #include <dt-bindings/power/mt8192-power.h> / { @@ -523,6 +525,33 @@ clock-names = "clk13m"; }; + pwrap: pwrap@10026000 { + compatible = "mediatek,mt6873-pwrap"; + reg = <0 0x10026000 0 0x1000>; + reg-names = "pwrap"; + interrupts = <GIC_SPI 220 IRQ_TYPE_LEVEL_HIGH 0>; + clocks = <&infracfg CLK_INFRA_PMIC_AP>, + <&infracfg CLK_INFRA_PMIC_TMR>; + clock-names = "spi", "wrap"; + assigned-clocks = <&topckgen CLK_TOP_PWRAP_ULPOSC_SEL>; + assigned-clock-parents = <&topckgen CLK_TOP_OSC_D10>; + }; + + spmi: spmi@10027000 { + compatible = "mediatek,mt6873-spmi"; + reg = <0 0x10027000 0 0x000e00>, + <0 0x10029000 0 0x000100>; + reg-names = "pmif", "spmimst"; + clocks = <&infracfg CLK_INFRA_PMIC_AP>, + <&infracfg CLK_INFRA_PMIC_TMR>, + <&topckgen CLK_TOP_SPMI_MST_SEL>; + clock-names = "pmif_sys_ck", + "pmif_tmr_ck", + "spmimst_clk_mux"; + assigned-clocks = <&topckgen CLK_TOP_PWRAP_ULPOSC_SEL>; + assigned-clock-parents = <&topckgen CLK_TOP_OSC_D10>; + }; + scp_adsp: clock-controller@10720000 { compatible = "mediatek,mt8192-scp_adsp"; reg = <0 0x10720000 0 0x1000>; @@ -667,6 +696,205 @@ status = "disabled"; }; + scp: scp@10500000 { + compatible = "mediatek,mt8192-scp"; + reg = <0 0x10500000 0 0x100000>, + <0 0x10720000 0 0xe0000>, + <0 0x10700000 0 0x8000>; + reg-names = "sram", "cfg", "l1tcm"; + interrupts = <GIC_SPI 435 IRQ_TYPE_LEVEL_HIGH 0>; + clocks = <&infracfg CLK_INFRA_SCPSYS>; + clock-names = "main"; + status = "disabled"; + }; + + xhci: usb@11200000 { + compatible = "mediatek,mt8192-xhci", + "mediatek,mtk-xhci"; + reg = <0 0x11200000 0 0x1000>, + <0 0x11203e00 0 0x0100>; + reg-names = "mac", "ippc"; + interrupts-extended = <&gic GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH 0>; + interrupt-names = "host"; + phys = <&u2port0 PHY_TYPE_USB2>, + <&u3port0 PHY_TYPE_USB3>; + assigned-clocks = <&topckgen CLK_TOP_USB_TOP_SEL>, + <&topckgen CLK_TOP_SSUSB_XHCI_SEL>; + assigned-clock-parents = <&topckgen CLK_TOP_UNIVPLL_D5_D4>, + <&topckgen CLK_TOP_UNIVPLL_D5_D4>; + clocks = <&infracfg CLK_INFRA_SSUSB>, + <&infracfg CLK_INFRA_SSUSB_XHCI>, + <&apmixedsys CLK_APMIXED_USBPLL>; + clock-names = "sys_ck", "xhci_ck", "ref_ck"; + wakeup-source; + mediatek,syscon-wakeup = <&pericfg 0x420 102>; + status = "disabled"; + }; + + audsys: syscon@11210000 { + compatible = "mediatek,mt8192-audsys", "syscon"; + reg = <0 0x11210000 0 0x2000>; + #clock-cells = <1>; + + afe: mt8192-afe-pcm { + compatible = "mediatek,mt8192-audio"; + interrupts = <GIC_SPI 202 IRQ_TYPE_LEVEL_HIGH 0>; + resets = <&watchdog 17>; + reset-names = "audiosys"; + mediatek,apmixedsys = <&apmixedsys>; + mediatek,infracfg = <&infracfg>; + mediatek,topckgen = <&topckgen>; + power-domains = <&spm MT8192_POWER_DOMAIN_AUDIO>; + clocks = <&audsys CLK_AUD_AFE>, + <&audsys CLK_AUD_DAC>, + <&audsys CLK_AUD_DAC_PREDIS>, + <&audsys CLK_AUD_ADC>, + <&audsys CLK_AUD_ADDA6_ADC>, + <&audsys CLK_AUD_22M>, + <&audsys CLK_AUD_24M>, + <&audsys CLK_AUD_APLL_TUNER>, + <&audsys CLK_AUD_APLL2_TUNER>, + <&audsys CLK_AUD_TDM>, + <&audsys CLK_AUD_TML>, + <&audsys CLK_AUD_NLE>, + <&audsys CLK_AUD_DAC_HIRES>, + <&audsys CLK_AUD_ADC_HIRES>, + <&audsys CLK_AUD_ADC_HIRES_TML>, + <&audsys CLK_AUD_ADDA6_ADC_HIRES>, + <&audsys CLK_AUD_3RD_DAC>, + <&audsys CLK_AUD_3RD_DAC_PREDIS>, + <&audsys CLK_AUD_3RD_DAC_TML>, + <&audsys CLK_AUD_3RD_DAC_HIRES>, + <&infracfg CLK_INFRA_AUDIO>, + <&infracfg CLK_INFRA_AUDIO_26M_B>, + <&topckgen CLK_TOP_AUDIO_SEL>, + <&topckgen CLK_TOP_AUD_INTBUS_SEL>, + <&topckgen CLK_TOP_MAINPLL_D4_D4>, + <&topckgen CLK_TOP_AUD_1_SEL>, + <&topckgen CLK_TOP_APLL1>, + <&topckgen CLK_TOP_AUD_2_SEL>, + <&topckgen CLK_TOP_APLL2>, + <&topckgen CLK_TOP_AUD_ENGEN1_SEL>, + <&topckgen CLK_TOP_APLL1_D4>, + <&topckgen CLK_TOP_AUD_ENGEN2_SEL>, + <&topckgen CLK_TOP_APLL2_D4>, + <&topckgen CLK_TOP_APLL_I2S0_M_SEL>, + <&topckgen CLK_TOP_APLL_I2S1_M_SEL>, + <&topckgen CLK_TOP_APLL_I2S2_M_SEL>, + <&topckgen CLK_TOP_APLL_I2S3_M_SEL>, + <&topckgen CLK_TOP_APLL_I2S4_M_SEL>, + <&topckgen CLK_TOP_APLL_I2S5_M_SEL>, + <&topckgen CLK_TOP_APLL_I2S6_M_SEL>, + <&topckgen CLK_TOP_APLL_I2S7_M_SEL>, + <&topckgen CLK_TOP_APLL_I2S8_M_SEL>, + <&topckgen CLK_TOP_APLL_I2S9_M_SEL>, + <&topckgen CLK_TOP_APLL12_DIV0>, + <&topckgen CLK_TOP_APLL12_DIV1>, + <&topckgen CLK_TOP_APLL12_DIV2>, + <&topckgen CLK_TOP_APLL12_DIV3>, + <&topckgen CLK_TOP_APLL12_DIV4>, + <&topckgen CLK_TOP_APLL12_DIVB>, + <&topckgen CLK_TOP_APLL12_DIV5>, + <&topckgen CLK_TOP_APLL12_DIV6>, + <&topckgen CLK_TOP_APLL12_DIV7>, + <&topckgen CLK_TOP_APLL12_DIV8>, + <&topckgen CLK_TOP_APLL12_DIV9>, + <&topckgen CLK_TOP_AUDIO_H_SEL>, + <&clk26m>; + clock-names = "aud_afe_clk", + "aud_dac_clk", + "aud_dac_predis_clk", + "aud_adc_clk", + "aud_adda6_adc_clk", + "aud_apll22m_clk", + "aud_apll24m_clk", + "aud_apll1_tuner_clk", + "aud_apll2_tuner_clk", + "aud_tdm_clk", + "aud_tml_clk", + "aud_nle", + "aud_dac_hires_clk", + "aud_adc_hires_clk", + "aud_adc_hires_tml", + "aud_adda6_adc_hires_clk", + "aud_3rd_dac_clk", + "aud_3rd_dac_predis_clk", + "aud_3rd_dac_tml", + "aud_3rd_dac_hires_clk", + "aud_infra_clk", + "aud_infra_26m_clk", + "top_mux_audio", + "top_mux_audio_int", + "top_mainpll_d4_d4", + "top_mux_aud_1", + "top_apll1_ck", + "top_mux_aud_2", + "top_apll2_ck", + "top_mux_aud_eng1", + "top_apll1_d4", + "top_mux_aud_eng2", + "top_apll2_d4", + "top_i2s0_m_sel", + "top_i2s1_m_sel", + "top_i2s2_m_sel", + "top_i2s3_m_sel", + "top_i2s4_m_sel", + "top_i2s5_m_sel", + "top_i2s6_m_sel", + "top_i2s7_m_sel", + "top_i2s8_m_sel", + "top_i2s9_m_sel", + "top_apll12_div0", + "top_apll12_div1", + "top_apll12_div2", + "top_apll12_div3", + "top_apll12_div4", + "top_apll12_divb", + "top_apll12_div5", + "top_apll12_div6", + "top_apll12_div7", + "top_apll12_div8", + "top_apll12_div9", + "top_mux_audio_h", + "top_clk26m_clk"; + }; + }; + + pcie: pcie@11230000 { + compatible = "mediatek,mt8192-pcie"; + device_type = "pci"; + reg = <0 0x11230000 0 0x2000>; + reg-names = "pcie-mac"; + #address-cells = <3>; + #size-cells = <2>; + clocks = <&infracfg CLK_INFRA_PCIE_PL_P_250M>, + <&infracfg CLK_INFRA_PCIE_TL_26M>, + <&infracfg CLK_INFRA_PCIE_TL_96M>, + <&infracfg CLK_INFRA_PCIE_TL_32K>, + <&infracfg CLK_INFRA_PCIE_PERI_26M>, + <&infracfg CLK_INFRA_PCIE_TOP_H_133M>; + clock-names = "pl_250m", "tl_26m", "tl_96m", + "tl_32k", "peri_26m", "top_133m"; + assigned-clocks = <&topckgen CLK_TOP_TL_SEL>; + assigned-clock-parents = <&topckgen CLK_TOP_MAINPLL_D6_D4>; + interrupts = <GIC_SPI 251 IRQ_TYPE_LEVEL_HIGH 0>; + bus-range = <0x00 0xff>; + ranges = <0x82000000 0 0x12000000 0x0 0x12000000 0 0x0800000>, + <0x81000000 0 0x12800000 0x0 0x12800000 0 0x0800000>; + #interrupt-cells = <1>; + interrupt-map-mask = <0 0 0 7>; + interrupt-map = <0 0 0 1 &pcie_intc0 0>, + <0 0 0 2 &pcie_intc0 1>, + <0 0 0 3 &pcie_intc0 2>, + <0 0 0 4 &pcie_intc0 3>; + + pcie_intc0: interrupt-controller { + interrupt-controller; + #address-cells = <0>; + #interrupt-cells = <1>; + }; + }; + nor_flash: spi@11234000 { compatible = "mediatek,mt8192-nor"; reg = <0 0x11234000 0 0xe0>; @@ -679,13 +907,22 @@ assigned-clock-parents = <&clk26m>; #address-cells = <1>; #size-cells = <0>; - status = "disable"; + status = "disabled"; }; - audsys: clock-controller@11210000 { - compatible = "mediatek,mt8192-audsys", "syscon"; - reg = <0 0x11210000 0 0x1000>; - #clock-cells = <1>; + efuse: efuse@11c10000 { + compatible = "mediatek,efuse"; + reg = <0 0x11c10000 0 0x1000>; + #address-cells = <1>; + #size-cells = <1>; + + lvts_e_data1: data1@1c0 { + reg = <0x1c0 0x58>; + }; + + svs_calibration: calib@580 { + reg = <0x580 0x68>; + }; }; i2c3: i2c@11cb0000 { @@ -824,6 +1061,28 @@ #clock-cells = <1>; }; + u3phy0: t-phy@11e40000 { + compatible = "mediatek,mt8192-tphy", + "mediatek,generic-tphy-v2"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x0 0x11e40000 0x1000>; + + u2port0: usb-phy@0 { + reg = <0x0 0x700>; + clocks = <&clk26m>; + clock-names = "ref"; + #phy-cells = <1>; + }; + + u3port0: usb-phy@700 { + reg = <0x700 0x900>; + clocks = <&clk26m>; + clock-names = "ref"; + #phy-cells = <1>; + }; + }; + i2c0: i2c@11f00000 { compatible = "mediatek,mt8192-i2c"; reg = <0 0x11f00000 0 0x1000>, @@ -864,10 +1123,36 @@ #clock-cells = <1>; }; - msdc: clock-controller@11f60000 { - compatible = "mediatek,mt8192-msdc"; - reg = <0 0x11f60000 0 0x1000>; - #clock-cells = <1>; + mmc0: mmc@11f60000 { + compatible = "mediatek,mt8192-mmc", "mediatek,mt8183-mmc"; + reg = <0 0x11f60000 0 0x1000>, <0 0x11f50000 0 0x1000>; + interrupts = <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH 0>; + clocks = <&topckgen CLK_TOP_MSDC50_0_SEL>, + <&msdc_top CLK_MSDC_TOP_H_MST_0P>, + <&msdc_top CLK_MSDC_TOP_SRC_0P>, + <&msdc_top CLK_MSDC_TOP_P_CFG>, + <&msdc_top CLK_MSDC_TOP_P_MSDC0>, + <&msdc_top CLK_MSDC_TOP_AXI>, + <&msdc_top CLK_MSDC_TOP_AHB2AXI_BRG_AXI>; + clock-names = "source", "hclk", "source_cg", "sys_cg", + "pclk_cg", "axi_cg", "ahb_cg"; + status = "disabled"; + }; + + mmc1: mmc@11f70000 { + compatible = "mediatek,mt8192-mmc", "mediatek,mt8183-mmc"; + reg = <0 0x11f70000 0 0x1000>, <0 0x11c70000 0 0x1000>; + interrupts = <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH 0>; + clocks = <&topckgen CLK_TOP_MSDC30_1_SEL>, + <&msdc_top CLK_MSDC_TOP_H_MST_1P>, + <&msdc_top CLK_MSDC_TOP_SRC_1P>, + <&msdc_top CLK_MSDC_TOP_P_CFG>, + <&msdc_top CLK_MSDC_TOP_P_MSDC1>, + <&msdc_top CLK_MSDC_TOP_AXI>, + <&msdc_top CLK_MSDC_TOP_AHB2AXI_BRG_AXI>; + clock-names = "source", "hclk", "source_cg", "sys_cg", + "pclk_cg", "axi_cg", "ahb_cg"; + status = "disabled"; }; mfgcfg: clock-controller@13fbf000 { @@ -882,24 +1167,125 @@ #clock-cells = <1>; }; + smi_common: smi@14002000 { + compatible = "mediatek,mt8192-smi-common"; + reg = <0 0x14002000 0 0x1000>; + clocks = <&mmsys CLK_MM_SMI_COMMON>, + <&mmsys CLK_MM_SMI_INFRA>, + <&mmsys CLK_MM_SMI_GALS>, + <&mmsys CLK_MM_SMI_GALS>; + clock-names = "apb", "smi", "gals0", "gals1"; + power-domains = <&spm MT8192_POWER_DOMAIN_DISP>; + }; + + larb0: larb@14003000 { + compatible = "mediatek,mt8192-smi-larb"; + reg = <0 0x14003000 0 0x1000>; + mediatek,larb-id = <0>; + mediatek,smi = <&smi_common>; + clocks = <&clk26m>, <&clk26m>; + clock-names = "apb", "smi"; + power-domains = <&spm MT8192_POWER_DOMAIN_DISP>; + }; + + larb1: larb@14004000 { + compatible = "mediatek,mt8192-smi-larb"; + reg = <0 0x14004000 0 0x1000>; + mediatek,larb-id = <1>; + mediatek,smi = <&smi_common>; + clocks = <&clk26m>, <&clk26m>; + clock-names = "apb", "smi"; + power-domains = <&spm MT8192_POWER_DOMAIN_DISP>; + }; + + dpi0: dpi@14016000 { + compatible = "mediatek,mt8192-dpi"; + reg = <0 0x14016000 0 0x1000>; + interrupts = <GIC_SPI 270 IRQ_TYPE_LEVEL_HIGH 0>; + clocks = <&mmsys CLK_MM_DPI_DPI0>, + <&mmsys CLK_MM_DISP_DPI0>, + <&apmixedsys CLK_APMIXED_TVDPLL>; + clock-names = "pixel", "engine", "pll"; + status = "disabled"; + }; + + iommu0: m4u@1401d000 { + compatible = "mediatek,mt8192-m4u"; + reg = <0 0x1401d000 0 0x1000>; + mediatek,larbs = <&larb0>, <&larb1>, <&larb2>, + <&larb4>, <&larb5>, <&larb7>, + <&larb9>, <&larb11>, <&larb13>, + <&larb14>, <&larb16>, <&larb17>, + <&larb18>, <&larb19>, <&larb20>; + interrupts = <GIC_SPI 277 IRQ_TYPE_LEVEL_HIGH 0>; + clocks = <&mmsys CLK_MM_SMI_IOMMU>; + clock-names = "bclk"; + power-domains = <&spm MT8192_POWER_DOMAIN_DISP>; + #iommu-cells = <1>; + }; + imgsys: clock-controller@15020000 { compatible = "mediatek,mt8192-imgsys"; reg = <0 0x15020000 0 0x1000>; #clock-cells = <1>; }; + larb9: larb@1502e000 { + compatible = "mediatek,mt8192-smi-larb"; + reg = <0 0x1502e000 0 0x1000>; + mediatek,larb-id = <9>; + mediatek,smi = <&smi_common>; + clocks = <&imgsys CLK_IMG_LARB9>, + <&imgsys CLK_IMG_LARB9>; + clock-names = "apb", "smi"; + power-domains = <&spm MT8192_POWER_DOMAIN_ISP>; + }; + imgsys2: clock-controller@15820000 { compatible = "mediatek,mt8192-imgsys2"; reg = <0 0x15820000 0 0x1000>; #clock-cells = <1>; }; + larb11: larb@1582e000 { + compatible = "mediatek,mt8192-smi-larb"; + reg = <0 0x1582e000 0 0x1000>; + mediatek,larb-id = <11>; + mediatek,smi = <&smi_common>; + clocks = <&imgsys2 CLK_IMG2_LARB11>, + <&imgsys2 CLK_IMG2_LARB11>; + clock-names = "apb", "smi"; + power-domains = <&spm MT8192_POWER_DOMAIN_ISP2>; + }; + + larb5: larb@1600d000 { + compatible = "mediatek,mt8192-smi-larb"; + reg = <0 0x1600d000 0 0x1000>; + mediatek,larb-id = <5>; + mediatek,smi = <&smi_common>; + clocks = <&vdecsys_soc CLK_VDEC_SOC_LARB1>, + <&vdecsys_soc CLK_VDEC_SOC_LARB1>; + clock-names = "apb", "smi"; + power-domains = <&spm MT8192_POWER_DOMAIN_VDEC>; + }; + vdecsys_soc: clock-controller@1600f000 { compatible = "mediatek,mt8192-vdecsys_soc"; reg = <0 0x1600f000 0 0x1000>; #clock-cells = <1>; }; + larb4: larb@1602e000 { + compatible = "mediatek,mt8192-smi-larb"; + reg = <0 0x1602e000 0 0x1000>; + mediatek,larb-id = <4>; + mediatek,smi = <&smi_common>; + clocks = <&vdecsys CLK_VDEC_SOC_LARB1>, + <&vdecsys CLK_VDEC_SOC_LARB1>; + clock-names = "apb", "smi"; + power-domains = <&spm MT8192_POWER_DOMAIN_VDEC2>; + }; + vdecsys: clock-controller@1602f000 { compatible = "mediatek,mt8192-vdecsys"; reg = <0 0x1602f000 0 0x1000>; @@ -912,12 +1298,101 @@ #clock-cells = <1>; }; + larb7: larb@17010000 { + compatible = "mediatek,mt8192-smi-larb"; + reg = <0 0x17010000 0 0x1000>; + mediatek,larb-id = <7>; + mediatek,smi = <&smi_common>; + clocks = <&vencsys CLK_VENC_SET0_LARB>, + <&vencsys CLK_VENC_SET1_VENC>; + clock-names = "apb", "smi"; + power-domains = <&spm MT8192_POWER_DOMAIN_VENC>; + }; + + vcodec_enc: vcodec@17020000 { + compatible = "mediatek,mt8192-vcodec-enc"; + reg = <0 0x17020000 0 0x2000>; + iommus = <&iommu0 M4U_PORT_L7_VENC_RCPU>, + <&iommu0 M4U_PORT_L7_VENC_REC>, + <&iommu0 M4U_PORT_L7_VENC_BSDMA>, + <&iommu0 M4U_PORT_L7_VENC_SV_COMV>, + <&iommu0 M4U_PORT_L7_VENC_RD_COMV>, + <&iommu0 M4U_PORT_L7_VENC_CUR_LUMA>, + <&iommu0 M4U_PORT_L7_VENC_CUR_CHROMA>, + <&iommu0 M4U_PORT_L7_VENC_REF_LUMA>, + <&iommu0 M4U_PORT_L7_VENC_REF_CHROMA>, + <&iommu0 M4U_PORT_L7_VENC_SUB_R_LUMA>, + <&iommu0 M4U_PORT_L7_VENC_SUB_W_LUMA>; + interrupts = <GIC_SPI 309 IRQ_TYPE_LEVEL_HIGH 0>; + mediatek,scp = <&scp>; + power-domains = <&spm MT8192_POWER_DOMAIN_VENC>; + clocks = <&vencsys CLK_VENC_SET1_VENC>; + clock-names = "venc-set1"; + assigned-clocks = <&topckgen CLK_TOP_VENC_SEL>; + assigned-clock-parents = <&topckgen CLK_TOP_UNIVPLL_D4>; + }; + camsys: clock-controller@1a000000 { compatible = "mediatek,mt8192-camsys"; reg = <0 0x1a000000 0 0x1000>; #clock-cells = <1>; }; + larb13: larb@1a001000 { + compatible = "mediatek,mt8192-smi-larb"; + reg = <0 0x1a001000 0 0x1000>; + mediatek,larb-id = <13>; + mediatek,smi = <&smi_common>; + clocks = <&camsys CLK_CAM_CAM>, + <&camsys CLK_CAM_LARB13>; + clock-names = "apb", "smi"; + power-domains = <&spm MT8192_POWER_DOMAIN_CAM>; + }; + + larb14: larb@1a002000 { + compatible = "mediatek,mt8192-smi-larb"; + reg = <0 0x1a002000 0 0x1000>; + mediatek,larb-id = <14>; + mediatek,smi = <&smi_common>; + clocks = <&camsys CLK_CAM_CAM>, + <&camsys CLK_CAM_LARB14>; + clock-names = "apb", "smi"; + power-domains = <&spm MT8192_POWER_DOMAIN_CAM>; + }; + + larb16: larb@1a00f000 { + compatible = "mediatek,mt8192-smi-larb"; + reg = <0 0x1a00f000 0 0x1000>; + mediatek,larb-id = <16>; + mediatek,smi = <&smi_common>; + clocks = <&camsys_rawa CLK_CAM_RAWA_CAM>, + <&camsys_rawa CLK_CAM_RAWA_LARBX>; + clock-names = "apb", "smi"; + power-domains = <&spm MT8192_POWER_DOMAIN_CAM_RAWA>; + }; + + larb17: larb@1a010000 { + compatible = "mediatek,mt8192-smi-larb"; + reg = <0 0x1a010000 0 0x1000>; + mediatek,larb-id = <17>; + mediatek,smi = <&smi_common>; + clocks = <&camsys_rawb CLK_CAM_RAWB_CAM>, + <&camsys_rawb CLK_CAM_RAWB_LARBX>; + clock-names = "apb", "smi"; + power-domains = <&spm MT8192_POWER_DOMAIN_CAM_RAWB>; + }; + + larb18: larb@1a011000 { + compatible = "mediatek,mt8192-smi-larb"; + reg = <0 0x1a011000 0 0x1000>; + mediatek,larb-id = <18>; + mediatek,smi = <&smi_common>; + clocks = <&camsys_rawc CLK_CAM_RAWC_LARBX>, + <&camsys_rawc CLK_CAM_RAWC_CAM>; + clock-names = "apb", "smi"; + power-domains = <&spm MT8192_POWER_DOMAIN_CAM_RAWC>; + }; + camsys_rawa: clock-controller@1a04f000 { compatible = "mediatek,mt8192-camsys_rawa"; reg = <0 0x1a04f000 0 0x1000>; @@ -942,10 +1417,43 @@ #clock-cells = <1>; }; + larb20: larb@1b00f000 { + compatible = "mediatek,mt8192-smi-larb"; + reg = <0 0x1b00f000 0 0x1000>; + mediatek,larb-id = <20>; + mediatek,smi = <&smi_common>; + clocks = <&ipesys CLK_IPE_SMI_SUBCOM>, + <&ipesys CLK_IPE_LARB20>; + clock-names = "apb", "smi"; + power-domains = <&spm MT8192_POWER_DOMAIN_IPE>; + }; + + larb19: larb@1b10f000 { + compatible = "mediatek,mt8192-smi-larb"; + reg = <0 0x1b10f000 0 0x1000>; + mediatek,larb-id = <19>; + mediatek,smi = <&smi_common>; + clocks = <&ipesys CLK_IPE_SMI_SUBCOM>, + <&ipesys CLK_IPE_LARB19>; + clock-names = "apb", "smi"; + power-domains = <&spm MT8192_POWER_DOMAIN_IPE>; + }; + mdpsys: clock-controller@1f000000 { compatible = "mediatek,mt8192-mdpsys"; reg = <0 0x1f000000 0 0x1000>; #clock-cells = <1>; }; + + larb2: larb@1f002000 { + compatible = "mediatek,mt8192-smi-larb"; + reg = <0 0x1f002000 0 0x1000>; + mediatek,larb-id = <2>; + mediatek,smi = <&smi_common>; + clocks = <&mdpsys CLK_MDP_SMI0>, + <&mdpsys CLK_MDP_SMI0>; + clock-names = "apb", "smi"; + power-domains = <&spm MT8192_POWER_DOMAIN_MDP>; + }; }; }; diff --git a/arch/arm64/boot/dts/mediatek/mt8195-demo.dts b/arch/arm64/boot/dts/mediatek/mt8195-demo.dts new file mode 100644 index 000000000000..4fbd99eb496a --- /dev/null +++ b/arch/arm64/boot/dts/mediatek/mt8195-demo.dts @@ -0,0 +1,450 @@ +// SPDX-License-Identifier: (GPL-2.0 OR MIT) +/* + * Copyright (C) 2022 BayLibre, SAS. + * Author: Fabien Parent <fparent@baylibre.com> + */ +/dts-v1/; + +#include "mt8195.dtsi" +#include "mt6359.dtsi" + +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/input/input.h> +#include <dt-bindings/pinctrl/mt8195-pinfunc.h> +#include <dt-bindings/regulator/mediatek,mt6360-regulator.h> + +/ { + model = "MediaTek MT8195 demo board"; + compatible = "mediatek,mt8195-demo", "mediatek,mt8195"; + + aliases { + serial0 = &uart0; + }; + + chosen { + stdout-path = "serial0:921600n8"; + }; + + firmware { + optee { + compatible = "linaro,optee-tz"; + method = "smc"; + }; + }; + + gpio-keys { + compatible = "gpio-keys"; + pinctrl-names = "default"; + pinctrl-0 = <&gpio_keys_pins>; + + key-0 { + gpios = <&pio 106 GPIO_ACTIVE_LOW>; + label = "volume_up"; + linux,code = <KEY_VOLUMEUP>; + wakeup-source; + debounce-interval = <15>; + }; + }; + + memory@40000000 { + device_type = "memory"; + reg = <0 0x40000000 0 0x80000000>; + }; + + reserved-memory { + #address-cells = <2>; + #size-cells = <2>; + ranges; + + /* 192 KiB reserved for ARM Trusted Firmware (BL31) */ + bl31_secmon_reserved: secmon@54600000 { + no-map; + reg = <0 0x54600000 0x0 0x30000>; + }; + + /* 12 MiB reserved for OP-TEE (BL32) + * +-----------------------+ 0x43e0_0000 + * | SHMEM 2MiB | + * +-----------------------+ 0x43c0_0000 + * | | TA_RAM 8MiB | + * + TZDRAM +--------------+ 0x4340_0000 + * | | TEE_RAM 2MiB | + * +-----------------------+ 0x4320_0000 + */ + optee_reserved: optee@43200000 { + no-map; + reg = <0 0x43200000 0 0x00c00000>; + }; + }; +}; + +&i2c6 { + clock-frequency = <400000>; + pinctrl-0 = <&i2c6_pins>; + pinctrl-names = "default"; + status = "okay"; + + mt6360: pmic@34 { + compatible = "mediatek,mt6360"; + reg = <0x34>; + interrupt-controller; + interrupts-extended = <&pio 101 IRQ_TYPE_EDGE_FALLING>; + interrupt-names = "IRQB"; + + charger { + compatible = "mediatek,mt6360-chg"; + richtek,vinovp-microvolt = <14500000>; + + otg_vbus_regulator: usb-otg-vbus-regulator { + regulator-compatible = "usb-otg-vbus"; + regulator-name = "usb-otg-vbus"; + regulator-min-microvolt = <4425000>; + regulator-max-microvolt = <5825000>; + }; + }; + + regulator { + compatible = "mediatek,mt6360-regulator"; + LDO_VIN3-supply = <&mt6360_buck2>; + + mt6360_buck1: buck1 { + regulator-compatible = "BUCK1"; + regulator-name = "mt6360,buck1"; + regulator-min-microvolt = <300000>; + regulator-max-microvolt = <1300000>; + regulator-allowed-modes = <MT6360_OPMODE_NORMAL + MT6360_OPMODE_LP + MT6360_OPMODE_ULP>; + regulator-always-on; + }; + + mt6360_buck2: buck2 { + regulator-compatible = "BUCK2"; + regulator-name = "mt6360,buck2"; + regulator-min-microvolt = <300000>; + regulator-max-microvolt = <1300000>; + regulator-allowed-modes = <MT6360_OPMODE_NORMAL + MT6360_OPMODE_LP + MT6360_OPMODE_ULP>; + regulator-always-on; + }; + + mt6360_ldo1: ldo1 { + regulator-compatible = "LDO1"; + regulator-name = "mt6360,ldo1"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <3600000>; + regulator-allowed-modes = <MT6360_OPMODE_NORMAL + MT6360_OPMODE_LP>; + }; + + mt6360_ldo2: ldo2 { + regulator-compatible = "LDO2"; + regulator-name = "mt6360,ldo2"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <3600000>; + regulator-allowed-modes = <MT6360_OPMODE_NORMAL + MT6360_OPMODE_LP>; + }; + + mt6360_ldo3: ldo3 { + regulator-compatible = "LDO3"; + regulator-name = "mt6360,ldo3"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <3600000>; + regulator-allowed-modes = <MT6360_OPMODE_NORMAL + MT6360_OPMODE_LP>; + }; + + mt6360_ldo5: ldo5 { + regulator-compatible = "LDO5"; + regulator-name = "mt6360,ldo5"; + regulator-min-microvolt = <2700000>; + regulator-max-microvolt = <3600000>; + regulator-allowed-modes = <MT6360_OPMODE_NORMAL + MT6360_OPMODE_LP>; + }; + + mt6360_ldo6: ldo6 { + regulator-compatible = "LDO6"; + regulator-name = "mt6360,ldo6"; + regulator-min-microvolt = <500000>; + regulator-max-microvolt = <2100000>; + regulator-allowed-modes = <MT6360_OPMODE_NORMAL + MT6360_OPMODE_LP>; + }; + + mt6360_ldo7: ldo7 { + regulator-compatible = "LDO7"; + regulator-name = "mt6360,ldo7"; + regulator-min-microvolt = <500000>; + regulator-max-microvolt = <2100000>; + regulator-allowed-modes = <MT6360_OPMODE_NORMAL + MT6360_OPMODE_LP>; + regulator-always-on; + }; + }; + }; +}; + +&mmc0 { + status = "okay"; + pinctrl-names = "default", "state_uhs"; + pinctrl-0 = <&mmc0_default_pins>; + pinctrl-1 = <&mmc0_uhs_pins>; + bus-width = <8>; + max-frequency = <200000000>; + cap-mmc-highspeed; + mmc-hs200-1_8v; + mmc-hs400-1_8v; + cap-mmc-hw-reset; + no-sdio; + no-sd; + hs400-ds-delay = <0x14c11>; + vmmc-supply = <&mt6359_vemc_1_ldo_reg>; + vqmmc-supply = <&mt6359_vufs_ldo_reg>; + non-removable; +}; + +&mmc1 { + pinctrl-names = "default", "state_uhs"; + pinctrl-0 = <&mmc1_default_pins>; + pinctrl-1 = <&mmc1_uhs_pins>; + cd-gpios = <&pio 129 GPIO_ACTIVE_LOW>; + bus-width = <4>; + max-frequency = <200000000>; + cap-sd-highspeed; + sd-uhs-sdr50; + sd-uhs-sdr104; + vmmc-supply = <&mt6360_ldo5>; + vqmmc-supply = <&mt6360_ldo3>; + status = "okay"; +}; + +&mt6359_vbbck_ldo_reg { + regulator-always-on; +}; + +&mt6359_vcore_buck_reg { + regulator-always-on; +}; + +&mt6359_vgpu11_buck_reg { + regulator-always-on; +}; + +&mt6359_vproc1_buck_reg { + regulator-always-on; +}; + +&mt6359_vproc2_buck_reg { + regulator-always-on; +}; + +&mt6359_vpu_buck_reg { + regulator-always-on; +}; + +&mt6359_vrf12_ldo_reg { + regulator-always-on; +}; + +&mt6359_vsram_md_ldo_reg { + regulator-always-on; +}; + +&mt6359_vsram_others_ldo_reg { + regulator-always-on; +}; + +&pio { + gpio_keys_pins: gpio-keys-pins { + pins { + pinmux = <PINMUX_GPIO106__FUNC_GPIO106>; + input-enable; + }; + }; + + i2c6_pins: i2c6-pins { + pins { + pinmux = <PINMUX_GPIO25__FUNC_SDA6>, + <PINMUX_GPIO26__FUNC_SCL6>; + bias-pull-up; + }; + }; + + mmc0_default_pins: mmc0-default-pins { + pins-clk { + pinmux = <PINMUX_GPIO122__FUNC_MSDC0_CLK>; + drive-strength = <MTK_DRIVE_6mA>; + bias-pull-down = <MTK_PUPD_SET_R1R0_10>; + }; + + pins-cmd-dat { + pinmux = <PINMUX_GPIO126__FUNC_MSDC0_DAT0>, + <PINMUX_GPIO125__FUNC_MSDC0_DAT1>, + <PINMUX_GPIO124__FUNC_MSDC0_DAT2>, + <PINMUX_GPIO123__FUNC_MSDC0_DAT3>, + <PINMUX_GPIO119__FUNC_MSDC0_DAT4>, + <PINMUX_GPIO118__FUNC_MSDC0_DAT5>, + <PINMUX_GPIO117__FUNC_MSDC0_DAT6>, + <PINMUX_GPIO116__FUNC_MSDC0_DAT7>, + <PINMUX_GPIO121__FUNC_MSDC0_CMD>; + input-enable; + drive-strength = <MTK_DRIVE_6mA>; + bias-pull-up = <MTK_PUPD_SET_R1R0_01>; + }; + + pins-rst { + pinmux = <PINMUX_GPIO120__FUNC_MSDC0_RSTB>; + drive-strength = <MTK_DRIVE_6mA>; + bias-pull-up = <MTK_PUPD_SET_R1R0_01>; + }; + }; + + mmc0_uhs_pins: mmc0-uhs-pins { + pins-clk { + pinmux = <PINMUX_GPIO122__FUNC_MSDC0_CLK>; + drive-strength = <MTK_DRIVE_8mA>; + bias-pull-down = <MTK_PUPD_SET_R1R0_10>; + }; + + pins-cmd-dat { + pinmux = <PINMUX_GPIO126__FUNC_MSDC0_DAT0>, + <PINMUX_GPIO125__FUNC_MSDC0_DAT1>, + <PINMUX_GPIO124__FUNC_MSDC0_DAT2>, + <PINMUX_GPIO123__FUNC_MSDC0_DAT3>, + <PINMUX_GPIO119__FUNC_MSDC0_DAT4>, + <PINMUX_GPIO118__FUNC_MSDC0_DAT5>, + <PINMUX_GPIO117__FUNC_MSDC0_DAT6>, + <PINMUX_GPIO116__FUNC_MSDC0_DAT7>, + <PINMUX_GPIO121__FUNC_MSDC0_CMD>; + input-enable; + drive-strength = <MTK_DRIVE_8mA>; + bias-pull-up = <MTK_PUPD_SET_R1R0_01>; + }; + + pins-ds { + pinmux = <PINMUX_GPIO127__FUNC_MSDC0_DSL>; + drive-strength = <MTK_DRIVE_8mA>; + bias-pull-down = <MTK_PUPD_SET_R1R0_10>; + }; + + pins-rst { + pinmux = <PINMUX_GPIO120__FUNC_MSDC0_RSTB>; + drive-strength = <MTK_DRIVE_8mA>; + bias-pull-up = <MTK_PUPD_SET_R1R0_01>; + }; + }; + + mmc1_default_pins: mmc1-default-pins { + pins-clk { + pinmux = <PINMUX_GPIO111__FUNC_MSDC1_CLK>; + drive-strength = <MTK_DRIVE_8mA>; + bias-pull-down = <MTK_PUPD_SET_R1R0_10>; + }; + + pins-cmd-dat { + pinmux = <PINMUX_GPIO110__FUNC_MSDC1_CMD>, + <PINMUX_GPIO112__FUNC_MSDC1_DAT0>, + <PINMUX_GPIO113__FUNC_MSDC1_DAT1>, + <PINMUX_GPIO114__FUNC_MSDC1_DAT2>, + <PINMUX_GPIO115__FUNC_MSDC1_DAT3>; + input-enable; + drive-strength = <MTK_DRIVE_8mA>; + bias-pull-up = <MTK_PUPD_SET_R1R0_01>; + }; + + pins-insert { + pinmux = <PINMUX_GPIO129__FUNC_GPIO129>; + bias-pull-up; + }; + }; + + mmc1_uhs_pins: mmc1-uhs-pins { + pins-clk { + pinmux = <PINMUX_GPIO111__FUNC_MSDC1_CLK>; + drive-strength = <MTK_DRIVE_8mA>; + bias-pull-down = <MTK_PUPD_SET_R1R0_10>; + }; + + pins-cmd-dat { + pinmux = <PINMUX_GPIO110__FUNC_MSDC1_CMD>, + <PINMUX_GPIO112__FUNC_MSDC1_DAT0>, + <PINMUX_GPIO113__FUNC_MSDC1_DAT1>, + <PINMUX_GPIO114__FUNC_MSDC1_DAT2>, + <PINMUX_GPIO115__FUNC_MSDC1_DAT3>; + input-enable; + drive-strength = <MTK_DRIVE_8mA>; + bias-pull-up = <MTK_PUPD_SET_R1R0_01>; + }; + }; + + uart0_pins: uart0-pins { + pins { + pinmux = <PINMUX_GPIO98__FUNC_UTXD0>, + <PINMUX_GPIO99__FUNC_URXD0>; + }; + }; + + uart1_pins: uart1-pins { + pins { + pinmux = <PINMUX_GPIO102__FUNC_UTXD1>, + <PINMUX_GPIO103__FUNC_URXD1>; + }; + }; +}; + + +&pmic { + interrupts-extended = <&pio 222 IRQ_TYPE_LEVEL_HIGH>; +}; + +&uart0 { + pinctrl-names = "default"; + pinctrl-0 = <&uart0_pins>; + status = "okay"; +}; + +&uart1 { + pinctrl-names = "default"; + pinctrl-0 = <&uart1_pins>; + status = "okay"; +}; + +&u3phy0 { + status = "okay"; +}; + +&u3phy1 { + status = "okay"; +}; + +&u3phy2 { + status = "okay"; +}; + +&u3phy3 { + status = "okay"; +}; + +&xhci0 { + vusb33-supply = <&mt6359_vusb_ldo_reg>; + vbus-supply = <&otg_vbus_regulator>; + status = "okay"; +}; + +&xhci1 { + vusb33-supply = <&mt6359_vusb_ldo_reg>; + status = "okay"; +}; + +&xhci2 { + vusb33-supply = <&mt6359_vusb_ldo_reg>; + status = "okay"; +}; + +&xhci3 { + vusb33-supply = <&mt6359_vusb_ldo_reg>; + status = "okay"; +}; diff --git a/arch/arm64/boot/dts/mediatek/mt8195-evb.dts b/arch/arm64/boot/dts/mediatek/mt8195-evb.dts new file mode 100644 index 000000000000..db25a515e420 --- /dev/null +++ b/arch/arm64/boot/dts/mediatek/mt8195-evb.dts @@ -0,0 +1,181 @@ +// SPDX-License-Identifier: (GPL-2.0 OR MIT) +/* + * Copyright (C) 2021 MediaTek Inc. + * Author: Seiya Wang <seiya.wang@mediatek.com> + */ +/dts-v1/; +#include "mt8195.dtsi" + +/ { + model = "MediaTek MT8195 evaluation board"; + compatible = "mediatek,mt8195-evb", "mediatek,mt8195"; + + aliases { + serial0 = &uart0; + }; + + chosen { + stdout-path = "serial0:921600n8"; + }; + + memory@40000000 { + device_type = "memory"; + reg = <0 0x40000000 0 0x80000000>; + }; +}; + +&auxadc { + status = "okay"; +}; + +&i2c0 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c0_pin>; + clock-frequency = <100000>; + status = "okay"; +}; + +&i2c1 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c1_pin>; + clock-frequency = <400000>; + status = "okay"; +}; + +&i2c4 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c4_pin>; + clock-frequency = <400000>; + status = "okay"; +}; + +&i2c6 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c6_pin>; + clock-frequency = <400000>; + status = "okay"; +}; + +&nor_flash { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&nor_pins_default>; + + flash@0 { + compatible = "jedec,spi-nor"; + reg = <0>; + spi-max-frequency = <50000000>; + }; +}; + +&pio { + i2c0_pin: i2c0-pins { + pins { + pinmux = <PINMUX_GPIO8__FUNC_SDA0>, + <PINMUX_GPIO9__FUNC_SCL0>; + bias-pull-up = <MTK_PUPD_SET_R1R0_01>; + mediatek,drive-strength-adv = <0>; + drive-strength = <6>; + }; + }; + + i2c1_pin: i2c1-pins { + pins { + pinmux = <PINMUX_GPIO10__FUNC_SDA1>, + <PINMUX_GPIO11__FUNC_SCL1>; + bias-pull-up = <MTK_PUPD_SET_R1R0_01>; + mediatek,drive-strength-adv = <0>; + drive-strength = <6>; + }; + }; + + i2c4_pin: i2c4-pins { + pins { + pinmux = <PINMUX_GPIO16__FUNC_SDA4>, + <PINMUX_GPIO17__FUNC_SCL4>; + bias-pull-up = <MTK_PUPD_SET_R1R0_01>; + mediatek,drive-strength-adv = <7>; + }; + }; + + i2c6_pin: i2c6-pins { + pins { + pinmux = <PINMUX_GPIO25__FUNC_SDA6>, + <PINMUX_GPIO26__FUNC_SCL6>; + bias-pull-up = <MTK_PUPD_SET_R1R0_01>; + }; + }; + + i2c7_pin: i2c7-pins { + pins { + pinmux = <PINMUX_GPIO27__FUNC_SCL7>, + <PINMUX_GPIO28__FUNC_SDA7>; + bias-pull-up = <MTK_PUPD_SET_R1R0_01>; + }; + }; + + nor_pins_default: nor-pins { + pins0 { + pinmux = <PINMUX_GPIO142__FUNC_SPINOR_IO0>, + <PINMUX_GPIO141__FUNC_SPINOR_CK>, + <PINMUX_GPIO143__FUNC_SPINOR_IO1>; + bias-pull-down; + }; + + pins1 { + pinmux = <PINMUX_GPIO140__FUNC_SPINOR_CS>, + <PINMUX_GPIO130__FUNC_SPINOR_IO2>, + <PINMUX_GPIO131__FUNC_SPINOR_IO3>; + bias-pull-up; + }; + }; + + uart0_pin: uart0-pins { + pins { + pinmux = <PINMUX_GPIO98__FUNC_UTXD0>, + <PINMUX_GPIO99__FUNC_URXD0>; + }; + }; +}; + +&u3phy0 { + status="okay"; +}; + +&u3phy1 { + status="okay"; +}; + +&u3phy2 { + status="okay"; +}; + +&u3phy3 { + status="okay"; +}; + +&uart0 { + pinctrl-names = "default"; + pinctrl-0 = <&uart0_pin>; + status = "okay"; +}; + +&xhci0 { + status = "okay"; +}; + +&xhci1 { + status = "okay"; +}; + +&xhci2 { + status = "okay"; +}; + +&xhci3 { + /* This controller is connected with a BT device. + * Disable usb2 lpm to prevent known issues. + */ + usb2-lpm-disable; + status = "okay"; +}; diff --git a/arch/arm64/boot/dts/mediatek/mt8195.dtsi b/arch/arm64/boot/dts/mediatek/mt8195.dtsi new file mode 100644 index 000000000000..b57e620c2c72 --- /dev/null +++ b/arch/arm64/boot/dts/mediatek/mt8195.dtsi @@ -0,0 +1,1045 @@ +// SPDX-License-Identifier: (GPL-2.0 OR MIT) +/* + * Copyright (c) 2021 MediaTek Inc. + * Author: Seiya Wang <seiya.wang@mediatek.com> + */ + +/dts-v1/; +#include <dt-bindings/clock/mt8195-clk.h> +#include <dt-bindings/interrupt-controller/arm-gic.h> +#include <dt-bindings/interrupt-controller/irq.h> +#include <dt-bindings/phy/phy.h> +#include <dt-bindings/pinctrl/mt8195-pinfunc.h> +#include <dt-bindings/reset/ti-syscon.h> + +/ { + compatible = "mediatek,mt8195"; + interrupt-parent = <&gic>; + #address-cells = <2>; + #size-cells = <2>; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + cpu0: cpu@0 { + device_type = "cpu"; + compatible = "arm,cortex-a55"; + reg = <0x000>; + enable-method = "psci"; + clock-frequency = <1701000000>; + capacity-dmips-mhz = <578>; + cpu-idle-states = <&cpu_off_l &cluster_off_l>; + next-level-cache = <&l2_0>; + #cooling-cells = <2>; + }; + + cpu1: cpu@100 { + device_type = "cpu"; + compatible = "arm,cortex-a55"; + reg = <0x100>; + enable-method = "psci"; + clock-frequency = <1701000000>; + capacity-dmips-mhz = <578>; + cpu-idle-states = <&cpu_off_l &cluster_off_l>; + next-level-cache = <&l2_0>; + #cooling-cells = <2>; + }; + + cpu2: cpu@200 { + device_type = "cpu"; + compatible = "arm,cortex-a55"; + reg = <0x200>; + enable-method = "psci"; + clock-frequency = <1701000000>; + capacity-dmips-mhz = <578>; + cpu-idle-states = <&cpu_off_l &cluster_off_l>; + next-level-cache = <&l2_0>; + #cooling-cells = <2>; + }; + + cpu3: cpu@300 { + device_type = "cpu"; + compatible = "arm,cortex-a55"; + reg = <0x300>; + enable-method = "psci"; + clock-frequency = <1701000000>; + capacity-dmips-mhz = <578>; + cpu-idle-states = <&cpu_off_l &cluster_off_l>; + next-level-cache = <&l2_0>; + #cooling-cells = <2>; + }; + + cpu4: cpu@400 { + device_type = "cpu"; + compatible = "arm,cortex-a78"; + reg = <0x400>; + enable-method = "psci"; + clock-frequency = <2171000000>; + capacity-dmips-mhz = <1024>; + cpu-idle-states = <&cpu_off_b &cluster_off_b>; + next-level-cache = <&l2_1>; + #cooling-cells = <2>; + }; + + cpu5: cpu@500 { + device_type = "cpu"; + compatible = "arm,cortex-a78"; + reg = <0x500>; + enable-method = "psci"; + clock-frequency = <2171000000>; + capacity-dmips-mhz = <1024>; + cpu-idle-states = <&cpu_off_b &cluster_off_b>; + next-level-cache = <&l2_1>; + #cooling-cells = <2>; + }; + + cpu6: cpu@600 { + device_type = "cpu"; + compatible = "arm,cortex-a78"; + reg = <0x600>; + enable-method = "psci"; + clock-frequency = <2171000000>; + capacity-dmips-mhz = <1024>; + cpu-idle-states = <&cpu_off_b &cluster_off_b>; + next-level-cache = <&l2_1>; + #cooling-cells = <2>; + }; + + cpu7: cpu@700 { + device_type = "cpu"; + compatible = "arm,cortex-a78"; + reg = <0x700>; + enable-method = "psci"; + clock-frequency = <2171000000>; + capacity-dmips-mhz = <1024>; + cpu-idle-states = <&cpu_off_b &cluster_off_b>; + next-level-cache = <&l2_1>; + #cooling-cells = <2>; + }; + + cpu-map { + cluster0 { + core0 { + cpu = <&cpu0>; + }; + + core1 { + cpu = <&cpu1>; + }; + + core2 { + cpu = <&cpu2>; + }; + + core3 { + cpu = <&cpu3>; + }; + }; + + cluster1 { + core0 { + cpu = <&cpu4>; + }; + + core1 { + cpu = <&cpu5>; + }; + + core2 { + cpu = <&cpu6>; + }; + + core3 { + cpu = <&cpu7>; + }; + }; + }; + + idle-states { + entry-method = "psci"; + + cpu_off_l: cpu-off-l { + compatible = "arm,idle-state"; + arm,psci-suspend-param = <0x00010001>; + local-timer-stop; + entry-latency-us = <50>; + exit-latency-us = <95>; + min-residency-us = <580>; + }; + + cpu_off_b: cpu-off-b { + compatible = "arm,idle-state"; + arm,psci-suspend-param = <0x00010001>; + local-timer-stop; + entry-latency-us = <45>; + exit-latency-us = <140>; + min-residency-us = <740>; + }; + + cluster_off_l: cluster-off-l { + compatible = "arm,idle-state"; + arm,psci-suspend-param = <0x01010002>; + local-timer-stop; + entry-latency-us = <55>; + exit-latency-us = <155>; + min-residency-us = <840>; + }; + + cluster_off_b: cluster-off-b { + compatible = "arm,idle-state"; + arm,psci-suspend-param = <0x01010002>; + local-timer-stop; + entry-latency-us = <50>; + exit-latency-us = <200>; + min-residency-us = <1000>; + }; + }; + + l2_0: l2-cache0 { + compatible = "cache"; + next-level-cache = <&l3_0>; + }; + + l2_1: l2-cache1 { + compatible = "cache"; + next-level-cache = <&l3_0>; + }; + + l3_0: l3-cache { + compatible = "cache"; + }; + }; + + dsu-pmu { + compatible = "arm,dsu-pmu"; + interrupts = <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH 0>; + cpus = <&cpu0>, <&cpu1>, <&cpu2>, <&cpu3>, + <&cpu4>, <&cpu5>, <&cpu6>, <&cpu7>; + }; + + clk26m: oscillator-26m { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <26000000>; + clock-output-names = "clk26m"; + }; + + clk32k: oscillator-32k { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <32768>; + clock-output-names = "clk32k"; + }; + + pmu-a55 { + compatible = "arm,cortex-a55-pmu"; + interrupt-parent = <&gic>; + interrupts = <GIC_PPI 7 IRQ_TYPE_LEVEL_HIGH &ppi_cluster0>; + }; + + pmu-a78 { + compatible = "arm,cortex-a78-pmu"; + interrupt-parent = <&gic>; + interrupts = <GIC_PPI 7 IRQ_TYPE_LEVEL_HIGH &ppi_cluster1>; + }; + + psci { + compatible = "arm,psci-1.0"; + method = "smc"; + }; + + timer: timer { + compatible = "arm,armv8-timer"; + interrupt-parent = <&gic>; + interrupts = <GIC_PPI 13 IRQ_TYPE_LEVEL_HIGH 0>, + <GIC_PPI 14 IRQ_TYPE_LEVEL_HIGH 0>, + <GIC_PPI 11 IRQ_TYPE_LEVEL_HIGH 0>, + <GIC_PPI 10 IRQ_TYPE_LEVEL_HIGH 0>; + }; + + soc { + #address-cells = <2>; + #size-cells = <2>; + compatible = "simple-bus"; + ranges; + + gic: interrupt-controller@c000000 { + compatible = "arm,gic-v3"; + #interrupt-cells = <4>; + #redistributor-regions = <1>; + interrupt-parent = <&gic>; + interrupt-controller; + reg = <0 0x0c000000 0 0x40000>, + <0 0x0c040000 0 0x200000>; + interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH 0>; + + ppi-partitions { + ppi_cluster0: interrupt-partition-0 { + affinity = <&cpu0 &cpu1 &cpu2 &cpu3>; + }; + + ppi_cluster1: interrupt-partition-1 { + affinity = <&cpu4 &cpu5 &cpu6 &cpu7>; + }; + }; + }; + + topckgen: syscon@10000000 { + compatible = "mediatek,mt8195-topckgen", "syscon"; + reg = <0 0x10000000 0 0x1000>; + #clock-cells = <1>; + }; + + infracfg_ao: syscon@10001000 { + compatible = "mediatek,mt8195-infracfg_ao", "syscon", "simple-mfd"; + reg = <0 0x10001000 0 0x1000>; + #clock-cells = <1>; + + infracfg_rst: reset-controller { + compatible = "ti,syscon-reset"; + #reset-cells = <1>; + ti,reset-bits = < + 0x140 18 0x144 18 0 0 (ASSERT_SET | DEASSERT_SET | STATUS_NONE) /* pcie */ + 0x120 0 0x124 0 0 0 (ASSERT_SET | DEASSERT_SET | STATUS_NONE) /* thermal */ + 0x730 10 0x734 10 0 0 (ASSERT_SET | DEASSERT_SET | STATUS_NONE) /* thermal */ + 0x150 5 0x154 5 0 0 (ASSERT_SET | DEASSERT_SET | STATUS_NONE) /* svs gpu */ + >; + }; + }; + + pericfg: syscon@10003000 { + compatible = "mediatek,mt8195-pericfg", "syscon"; + reg = <0 0x10003000 0 0x1000>; + #clock-cells = <1>; + }; + + pio: pinctrl@10005000 { + compatible = "mediatek,mt8195-pinctrl"; + reg = <0 0x10005000 0 0x1000>, + <0 0x11d10000 0 0x1000>, + <0 0x11d30000 0 0x1000>, + <0 0x11d40000 0 0x1000>, + <0 0x11e20000 0 0x1000>, + <0 0x11eb0000 0 0x1000>, + <0 0x11f40000 0 0x1000>, + <0 0x1000b000 0 0x1000>; + reg-names = "iocfg0", "iocfg_bm", "iocfg_bl", + "iocfg_br", "iocfg_lm", "iocfg_rb", + "iocfg_tl", "eint"; + gpio-controller; + #gpio-cells = <2>; + gpio-ranges = <&pio 0 0 144>; + interrupt-controller; + interrupts = <GIC_SPI 235 IRQ_TYPE_LEVEL_HIGH 0>; + #interrupt-cells = <2>; + }; + + watchdog: watchdog@10007000 { + compatible = "mediatek,mt8195-wdt", + "mediatek,mt6589-wdt"; + reg = <0 0x10007000 0 0x100>; + }; + + apmixedsys: syscon@1000c000 { + compatible = "mediatek,mt8195-apmixedsys", "syscon"; + reg = <0 0x1000c000 0 0x1000>; + #clock-cells = <1>; + }; + + systimer: timer@10017000 { + compatible = "mediatek,mt8195-timer", + "mediatek,mt6765-timer"; + reg = <0 0x10017000 0 0x1000>; + interrupts = <GIC_SPI 265 IRQ_TYPE_LEVEL_HIGH 0>; + clocks = <&topckgen CLK_TOP_CLK26M_D2>; + }; + + pwrap: pwrap@10024000 { + compatible = "mediatek,mt8195-pwrap", "syscon"; + reg = <0 0x10024000 0 0x1000>; + reg-names = "pwrap"; + interrupts = <GIC_SPI 243 IRQ_TYPE_LEVEL_HIGH 0>; + clocks = <&infracfg_ao CLK_INFRA_AO_PMIC_AP>, + <&infracfg_ao CLK_INFRA_AO_PMIC_TMR>; + clock-names = "spi", "wrap"; + assigned-clocks = <&topckgen CLK_TOP_PWRAP_ULPOSC>; + assigned-clock-parents = <&topckgen CLK_TOP_ULPOSC1_D10>; + }; + + scp_adsp: clock-controller@10720000 { + compatible = "mediatek,mt8195-scp_adsp"; + reg = <0 0x10720000 0 0x1000>; + #clock-cells = <1>; + }; + + uart0: serial@11001100 { + compatible = "mediatek,mt8195-uart", + "mediatek,mt6577-uart"; + reg = <0 0x11001100 0 0x100>; + interrupts = <GIC_SPI 141 IRQ_TYPE_LEVEL_HIGH 0>; + clocks = <&clk26m>, <&infracfg_ao CLK_INFRA_AO_UART0>; + clock-names = "baud", "bus"; + status = "disabled"; + }; + + uart1: serial@11001200 { + compatible = "mediatek,mt8195-uart", + "mediatek,mt6577-uart"; + reg = <0 0x11001200 0 0x100>; + interrupts = <GIC_SPI 142 IRQ_TYPE_LEVEL_HIGH 0>; + clocks = <&clk26m>, <&infracfg_ao CLK_INFRA_AO_UART1>; + clock-names = "baud", "bus"; + status = "disabled"; + }; + + uart2: serial@11001300 { + compatible = "mediatek,mt8195-uart", + "mediatek,mt6577-uart"; + reg = <0 0x11001300 0 0x100>; + interrupts = <GIC_SPI 143 IRQ_TYPE_LEVEL_HIGH 0>; + clocks = <&clk26m>, <&infracfg_ao CLK_INFRA_AO_UART2>; + clock-names = "baud", "bus"; + status = "disabled"; + }; + + uart3: serial@11001400 { + compatible = "mediatek,mt8195-uart", + "mediatek,mt6577-uart"; + reg = <0 0x11001400 0 0x100>; + interrupts = <GIC_SPI 723 IRQ_TYPE_LEVEL_HIGH 0>; + clocks = <&clk26m>, <&infracfg_ao CLK_INFRA_AO_UART3>; + clock-names = "baud", "bus"; + status = "disabled"; + }; + + uart4: serial@11001500 { + compatible = "mediatek,mt8195-uart", + "mediatek,mt6577-uart"; + reg = <0 0x11001500 0 0x100>; + interrupts = <GIC_SPI 724 IRQ_TYPE_LEVEL_HIGH 0>; + clocks = <&clk26m>, <&infracfg_ao CLK_INFRA_AO_UART4>; + clock-names = "baud", "bus"; + status = "disabled"; + }; + + uart5: serial@11001600 { + compatible = "mediatek,mt8195-uart", + "mediatek,mt6577-uart"; + reg = <0 0x11001600 0 0x100>; + interrupts = <GIC_SPI 725 IRQ_TYPE_LEVEL_HIGH 0>; + clocks = <&clk26m>, <&infracfg_ao CLK_INFRA_AO_UART5>; + clock-names = "baud", "bus"; + status = "disabled"; + }; + + auxadc: auxadc@11002000 { + compatible = "mediatek,mt8195-auxadc", + "mediatek,mt8173-auxadc"; + reg = <0 0x11002000 0 0x1000>; + clocks = <&infracfg_ao CLK_INFRA_AO_AUXADC>; + clock-names = "main"; + #io-channel-cells = <1>; + status = "disabled"; + }; + + pericfg_ao: syscon@11003000 { + compatible = "mediatek,mt8195-pericfg_ao", "syscon"; + reg = <0 0x11003000 0 0x1000>; + #clock-cells = <1>; + }; + + spi0: spi@1100a000 { + compatible = "mediatek,mt8195-spi", + "mediatek,mt6765-spi"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0 0x1100a000 0 0x1000>; + interrupts = <GIC_SPI 191 IRQ_TYPE_LEVEL_HIGH 0>; + clocks = <&topckgen CLK_TOP_UNIVPLL_D6_D2>, + <&topckgen CLK_TOP_SPI>, + <&infracfg_ao CLK_INFRA_AO_SPI0>; + clock-names = "parent-clk", "sel-clk", "spi-clk"; + status = "disabled"; + }; + + spi1: spi@11010000 { + compatible = "mediatek,mt8195-spi", + "mediatek,mt6765-spi"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0 0x11010000 0 0x1000>; + interrupts = <GIC_SPI 192 IRQ_TYPE_LEVEL_HIGH 0>; + clocks = <&topckgen CLK_TOP_UNIVPLL_D6_D2>, + <&topckgen CLK_TOP_SPI>, + <&infracfg_ao CLK_INFRA_AO_SPI1>; + clock-names = "parent-clk", "sel-clk", "spi-clk"; + status = "disabled"; + }; + + spi2: spi@11012000 { + compatible = "mediatek,mt8195-spi", + "mediatek,mt6765-spi"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0 0x11012000 0 0x1000>; + interrupts = <GIC_SPI 193 IRQ_TYPE_LEVEL_HIGH 0>; + clocks = <&topckgen CLK_TOP_UNIVPLL_D6_D2>, + <&topckgen CLK_TOP_SPI>, + <&infracfg_ao CLK_INFRA_AO_SPI2>; + clock-names = "parent-clk", "sel-clk", "spi-clk"; + status = "disabled"; + }; + + spi3: spi@11013000 { + compatible = "mediatek,mt8195-spi", + "mediatek,mt6765-spi"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0 0x11013000 0 0x1000>; + interrupts = <GIC_SPI 194 IRQ_TYPE_LEVEL_HIGH 0>; + clocks = <&topckgen CLK_TOP_UNIVPLL_D6_D2>, + <&topckgen CLK_TOP_SPI>, + <&infracfg_ao CLK_INFRA_AO_SPI3>; + clock-names = "parent-clk", "sel-clk", "spi-clk"; + status = "disabled"; + }; + + spi4: spi@11018000 { + compatible = "mediatek,mt8195-spi", + "mediatek,mt6765-spi"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0 0x11018000 0 0x1000>; + interrupts = <GIC_SPI 195 IRQ_TYPE_LEVEL_HIGH 0>; + clocks = <&topckgen CLK_TOP_UNIVPLL_D6_D2>, + <&topckgen CLK_TOP_SPI>, + <&infracfg_ao CLK_INFRA_AO_SPI4>; + clock-names = "parent-clk", "sel-clk", "spi-clk"; + status = "disabled"; + }; + + spi5: spi@11019000 { + compatible = "mediatek,mt8195-spi", + "mediatek,mt6765-spi"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0 0x11019000 0 0x1000>; + interrupts = <GIC_SPI 196 IRQ_TYPE_LEVEL_HIGH 0>; + clocks = <&topckgen CLK_TOP_UNIVPLL_D6_D2>, + <&topckgen CLK_TOP_SPI>, + <&infracfg_ao CLK_INFRA_AO_SPI5>; + clock-names = "parent-clk", "sel-clk", "spi-clk"; + status = "disabled"; + }; + + spis0: spi@1101d000 { + compatible = "mediatek,mt8195-spi-slave"; + reg = <0 0x1101d000 0 0x1000>; + interrupts = <GIC_SPI 197 IRQ_TYPE_LEVEL_HIGH 0>; + clocks = <&infracfg_ao CLK_INFRA_AO_SPIS0>; + clock-names = "spi"; + assigned-clocks = <&topckgen CLK_TOP_SPIS>; + assigned-clock-parents = <&topckgen CLK_TOP_UNIVPLL_D6>; + status = "disabled"; + }; + + spis1: spi@1101e000 { + compatible = "mediatek,mt8195-spi-slave"; + reg = <0 0x1101e000 0 0x1000>; + interrupts = <GIC_SPI 198 IRQ_TYPE_LEVEL_HIGH 0>; + clocks = <&infracfg_ao CLK_INFRA_AO_SPIS1>; + clock-names = "spi"; + assigned-clocks = <&topckgen CLK_TOP_SPIS>; + assigned-clock-parents = <&topckgen CLK_TOP_UNIVPLL_D6>; + status = "disabled"; + }; + + xhci0: usb@11200000 { + compatible = "mediatek,mt8195-xhci", + "mediatek,mtk-xhci"; + reg = <0 0x11200000 0 0x1000>, + <0 0x11203e00 0 0x0100>; + reg-names = "mac", "ippc"; + interrupts = <GIC_SPI 129 IRQ_TYPE_LEVEL_HIGH 0>; + phys = <&u2port0 PHY_TYPE_USB2>, + <&u3port0 PHY_TYPE_USB3>; + assigned-clocks = <&topckgen CLK_TOP_USB_TOP>, + <&topckgen CLK_TOP_SSUSB_XHCI>; + assigned-clock-parents = <&topckgen CLK_TOP_UNIVPLL_D5_D4>, + <&topckgen CLK_TOP_UNIVPLL_D5_D4>; + clocks = <&infracfg_ao CLK_INFRA_AO_SSUSB>, + <&topckgen CLK_TOP_SSUSB_REF>, + <&apmixedsys CLK_APMIXED_USB1PLL>, + <&infracfg_ao CLK_INFRA_AO_SSUSB_XHCI>; + clock-names = "sys_ck", "ref_ck", "mcu_ck", "xhci_ck"; + status = "disabled"; + }; + + mmc0: mmc@11230000 { + compatible = "mediatek,mt8195-mmc", + "mediatek,mt8183-mmc"; + reg = <0 0x11230000 0 0x10000>, + <0 0x11f50000 0 0x1000>; + interrupts = <GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH 0>; + clocks = <&topckgen CLK_TOP_MSDC50_0>, + <&infracfg_ao CLK_INFRA_AO_MSDC0>, + <&infracfg_ao CLK_INFRA_AO_MSDC0_SRC>; + clock-names = "source", "hclk", "source_cg"; + status = "disabled"; + }; + + mmc1: mmc@11240000 { + compatible = "mediatek,mt8195-mmc", + "mediatek,mt8183-mmc"; + reg = <0 0x11240000 0 0x1000>, + <0 0x11c70000 0 0x1000>; + interrupts = <GIC_SPI 135 IRQ_TYPE_LEVEL_HIGH 0>; + clocks = <&topckgen CLK_TOP_MSDC30_1>, + <&infracfg_ao CLK_INFRA_AO_MSDC1>, + <&infracfg_ao CLK_INFRA_AO_MSDC1_SRC>; + clock-names = "source", "hclk", "source_cg"; + assigned-clocks = <&topckgen CLK_TOP_MSDC30_1>; + assigned-clock-parents = <&topckgen CLK_TOP_MSDCPLL_D2>; + status = "disabled"; + }; + + mmc2: mmc@11250000 { + compatible = "mediatek,mt8195-mmc", + "mediatek,mt8183-mmc"; + reg = <0 0x11250000 0 0x1000>, + <0 0x11e60000 0 0x1000>; + interrupts = <GIC_SPI 136 IRQ_TYPE_LEVEL_HIGH 0>; + clocks = <&topckgen CLK_TOP_MSDC30_2>, + <&infracfg_ao CLK_INFRA_AO_CG1_MSDC2>, + <&infracfg_ao CLK_INFRA_AO_CG3_MSDC2>; + clock-names = "source", "hclk", "source_cg"; + assigned-clocks = <&topckgen CLK_TOP_MSDC30_2>; + assigned-clock-parents = <&topckgen CLK_TOP_MSDCPLL_D2>; + status = "disabled"; + }; + + xhci1: usb@11290000 { + compatible = "mediatek,mt8195-xhci", + "mediatek,mtk-xhci"; + reg = <0 0x11290000 0 0x1000>, + <0 0x11293e00 0 0x0100>; + reg-names = "mac", "ippc"; + interrupts = <GIC_SPI 530 IRQ_TYPE_LEVEL_HIGH 0>; + phys = <&u2port1 PHY_TYPE_USB2>; + assigned-clocks = <&topckgen CLK_TOP_USB_TOP_1P>, + <&topckgen CLK_TOP_SSUSB_XHCI_1P>; + assigned-clock-parents = <&topckgen CLK_TOP_UNIVPLL_D5_D4>, + <&topckgen CLK_TOP_UNIVPLL_D5_D4>; + clocks = <&pericfg_ao CLK_PERI_AO_SSUSB_1P_BUS>, + <&topckgen CLK_TOP_SSUSB_P1_REF>, + <&apmixedsys CLK_APMIXED_USB1PLL>, + <&pericfg_ao CLK_PERI_AO_SSUSB_1P_XHCI>; + clock-names = "sys_ck", "ref_ck", "mcu_ck","xhci_ck"; + status = "disabled"; + }; + + xhci2: usb@112a0000 { + compatible = "mediatek,mt8195-xhci", + "mediatek,mtk-xhci"; + reg = <0 0x112a0000 0 0x1000>, + <0 0x112a3e00 0 0x0100>; + reg-names = "mac", "ippc"; + interrupts = <GIC_SPI 533 IRQ_TYPE_LEVEL_HIGH 0>; + phys = <&u2port2 PHY_TYPE_USB2>; + assigned-clocks = <&topckgen CLK_TOP_USB_TOP_2P>, + <&topckgen CLK_TOP_SSUSB_XHCI_2P>; + assigned-clock-parents = <&topckgen CLK_TOP_UNIVPLL_D5_D4>, + <&topckgen CLK_TOP_UNIVPLL_D5_D4>; + clocks = <&pericfg_ao CLK_PERI_AO_SSUSB_2P_BUS>, + <&topckgen CLK_TOP_SSUSB_P2_REF>, + <&pericfg_ao CLK_PERI_AO_SSUSB_2P_XHCI>; + clock-names = "sys_ck", "ref_ck", "xhci_ck"; + status = "disabled"; + }; + + xhci3: usb@112b0000 { + compatible = "mediatek,mt8195-xhci", + "mediatek,mtk-xhci"; + reg = <0 0x112b0000 0 0x1000>, + <0 0x112b3e00 0 0x0100>; + reg-names = "mac", "ippc"; + interrupts = <GIC_SPI 536 IRQ_TYPE_LEVEL_HIGH 0>; + phys = <&u2port3 PHY_TYPE_USB2>; + assigned-clocks = <&topckgen CLK_TOP_USB_TOP_3P>, + <&topckgen CLK_TOP_SSUSB_XHCI_3P>; + assigned-clock-parents = <&topckgen CLK_TOP_UNIVPLL_D5_D4>, + <&topckgen CLK_TOP_UNIVPLL_D5_D4>; + clocks = <&pericfg_ao CLK_PERI_AO_SSUSB_3P_BUS>, + <&topckgen CLK_TOP_SSUSB_P3_REF>, + <&pericfg_ao CLK_PERI_AO_SSUSB_3P_XHCI>; + clock-names = "sys_ck", "ref_ck", "xhci_ck"; + status = "disabled"; + }; + + nor_flash: spi@1132c000 { + compatible = "mediatek,mt8195-nor", + "mediatek,mt8173-nor"; + reg = <0 0x1132c000 0 0x1000>; + interrupts = <GIC_SPI 825 IRQ_TYPE_LEVEL_HIGH 0>; + clocks = <&topckgen CLK_TOP_SPINOR>, + <&pericfg_ao CLK_PERI_AO_FLASHIF_FLASH>, + <&pericfg_ao CLK_PERI_AO_FLASHIF_BUS>; + clock-names = "spi", "sf", "axi"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + u3phy2: t-phy@11c40000 { + compatible = "mediatek,mt8195-tphy", "mediatek,generic-tphy-v3"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0 0x11c40000 0x700>; + status = "disabled"; + + u2port2: usb-phy@0 { + reg = <0x0 0x700>; + clocks = <&topckgen CLK_TOP_SSUSB_PHY_P2_REF>; + clock-names = "ref"; + #phy-cells = <1>; + }; + }; + + u3phy3: t-phy@11c50000 { + compatible = "mediatek,mt8195-tphy", "mediatek,generic-tphy-v3"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0 0x11c50000 0x700>; + status = "disabled"; + + u2port3: usb-phy@0 { + reg = <0x0 0x700>; + clocks = <&topckgen CLK_TOP_SSUSB_PHY_P3_REF>; + clock-names = "ref"; + #phy-cells = <1>; + }; + }; + + i2c5: i2c@11d00000 { + compatible = "mediatek,mt8195-i2c", + "mediatek,mt8192-i2c"; + reg = <0 0x11d00000 0 0x1000>, + <0 0x10220580 0 0x80>; + interrupts = <GIC_SPI 154 IRQ_TYPE_LEVEL_HIGH 0>; + clock-div = <1>; + clocks = <&imp_iic_wrap_s CLK_IMP_IIC_WRAP_S_I2C5>, + <&infracfg_ao CLK_INFRA_AO_APDMA_B>; + clock-names = "main", "dma"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + i2c6: i2c@11d01000 { + compatible = "mediatek,mt8195-i2c", + "mediatek,mt8192-i2c"; + reg = <0 0x11d01000 0 0x1000>, + <0 0x10220600 0 0x80>; + interrupts = <GIC_SPI 155 IRQ_TYPE_LEVEL_HIGH 0>; + clock-div = <1>; + clocks = <&imp_iic_wrap_s CLK_IMP_IIC_WRAP_S_I2C6>, + <&infracfg_ao CLK_INFRA_AO_APDMA_B>; + clock-names = "main", "dma"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + i2c7: i2c@11d02000 { + compatible = "mediatek,mt8195-i2c", + "mediatek,mt8192-i2c"; + reg = <0 0x11d02000 0 0x1000>, + <0 0x10220680 0 0x80>; + interrupts = <GIC_SPI 156 IRQ_TYPE_LEVEL_HIGH 0>; + clock-div = <1>; + clocks = <&imp_iic_wrap_s CLK_IMP_IIC_WRAP_S_I2C7>, + <&infracfg_ao CLK_INFRA_AO_APDMA_B>; + clock-names = "main", "dma"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + imp_iic_wrap_s: clock-controller@11d03000 { + compatible = "mediatek,mt8195-imp_iic_wrap_s"; + reg = <0 0x11d03000 0 0x1000>; + #clock-cells = <1>; + }; + + i2c0: i2c@11e00000 { + compatible = "mediatek,mt8195-i2c", + "mediatek,mt8192-i2c"; + reg = <0 0x11e00000 0 0x1000>, + <0 0x10220080 0 0x80>; + interrupts = <GIC_SPI 144 IRQ_TYPE_LEVEL_HIGH 0>; + clock-div = <1>; + clocks = <&imp_iic_wrap_w CLK_IMP_IIC_WRAP_W_I2C0>, + <&infracfg_ao CLK_INFRA_AO_APDMA_B>; + clock-names = "main", "dma"; + #address-cells = <1>; + #size-cells = <0>; + status = "okay"; + }; + + i2c1: i2c@11e01000 { + compatible = "mediatek,mt8195-i2c", + "mediatek,mt8192-i2c"; + reg = <0 0x11e01000 0 0x1000>, + <0 0x10220200 0 0x80>; + interrupts = <GIC_SPI 147 IRQ_TYPE_LEVEL_HIGH 0>; + clock-div = <1>; + clocks = <&imp_iic_wrap_w CLK_IMP_IIC_WRAP_W_I2C1>, + <&infracfg_ao CLK_INFRA_AO_APDMA_B>; + clock-names = "main", "dma"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + i2c2: i2c@11e02000 { + compatible = "mediatek,mt8195-i2c", + "mediatek,mt8192-i2c"; + reg = <0 0x11e02000 0 0x1000>, + <0 0x10220380 0 0x80>; + interrupts = <GIC_SPI 150 IRQ_TYPE_LEVEL_HIGH 0>; + clock-div = <1>; + clocks = <&imp_iic_wrap_w CLK_IMP_IIC_WRAP_W_I2C2>, + <&infracfg_ao CLK_INFRA_AO_APDMA_B>; + clock-names = "main", "dma"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + i2c3: i2c@11e03000 { + compatible = "mediatek,mt8195-i2c", + "mediatek,mt8192-i2c"; + reg = <0 0x11e03000 0 0x1000>, + <0 0x10220480 0 0x80>; + interrupts = <GIC_SPI 152 IRQ_TYPE_LEVEL_HIGH 0>; + clock-div = <1>; + clocks = <&imp_iic_wrap_w CLK_IMP_IIC_WRAP_W_I2C3>, + <&infracfg_ao CLK_INFRA_AO_APDMA_B>; + clock-names = "main", "dma"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + i2c4: i2c@11e04000 { + compatible = "mediatek,mt8195-i2c", + "mediatek,mt8192-i2c"; + reg = <0 0x11e04000 0 0x1000>, + <0 0x10220500 0 0x80>; + interrupts = <GIC_SPI 153 IRQ_TYPE_LEVEL_HIGH 0>; + clock-div = <1>; + clocks = <&imp_iic_wrap_w CLK_IMP_IIC_WRAP_W_I2C4>, + <&infracfg_ao CLK_INFRA_AO_APDMA_B>; + clock-names = "main", "dma"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + imp_iic_wrap_w: clock-controller@11e05000 { + compatible = "mediatek,mt8195-imp_iic_wrap_w"; + reg = <0 0x11e05000 0 0x1000>; + #clock-cells = <1>; + }; + + u3phy1: t-phy@11e30000 { + compatible = "mediatek,mt8195-tphy", "mediatek,generic-tphy-v3"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0 0x11e30000 0xe00>; + status = "disabled"; + + u2port1: usb-phy@0 { + reg = <0x0 0x700>; + clocks = <&topckgen CLK_TOP_SSUSB_PHY_P1_REF>, + <&clk26m>; + clock-names = "ref", "da_ref"; + #phy-cells = <1>; + }; + + u3port1: usb-phy@700 { + reg = <0x700 0x700>; + clocks = <&apmixedsys CLK_APMIXED_PLL_SSUSB26M>, + <&topckgen CLK_TOP_SSUSB_PHY_P1_REF>; + clock-names = "ref", "da_ref"; + #phy-cells = <1>; + }; + }; + + u3phy0: t-phy@11e40000 { + compatible = "mediatek,mt8195-tphy", "mediatek,generic-tphy-v3"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0 0x11e40000 0xe00>; + status = "disabled"; + + u2port0: usb-phy@0 { + reg = <0x0 0x700>; + clocks = <&topckgen CLK_TOP_SSUSB_PHY_REF>, + <&clk26m>; + clock-names = "ref", "da_ref"; + #phy-cells = <1>; + }; + + u3port0: usb-phy@700 { + reg = <0x700 0x700>; + clocks = <&apmixedsys CLK_APMIXED_PLL_SSUSB26M>, + <&topckgen CLK_TOP_SSUSB_PHY_REF>; + clock-names = "ref", "da_ref"; + #phy-cells = <1>; + }; + }; + + ufsphy: ufs-phy@11fa0000 { + compatible = "mediatek,mt8195-ufsphy", "mediatek,mt8183-ufsphy"; + reg = <0 0x11fa0000 0 0xc000>; + clocks = <&clk26m>, <&clk26m>; + clock-names = "unipro", "mp"; + #phy-cells = <0>; + status = "disabled"; + }; + + mfgcfg: clock-controller@13fbf000 { + compatible = "mediatek,mt8195-mfgcfg"; + reg = <0 0x13fbf000 0 0x1000>; + #clock-cells = <1>; + }; + + wpesys: clock-controller@14e00000 { + compatible = "mediatek,mt8195-wpesys"; + reg = <0 0x14e00000 0 0x1000>; + #clock-cells = <1>; + }; + + wpesys_vpp0: clock-controller@14e02000 { + compatible = "mediatek,mt8195-wpesys_vpp0"; + reg = <0 0x14e02000 0 0x1000>; + #clock-cells = <1>; + }; + + wpesys_vpp1: clock-controller@14e03000 { + compatible = "mediatek,mt8195-wpesys_vpp1"; + reg = <0 0x14e03000 0 0x1000>; + #clock-cells = <1>; + }; + + imgsys: clock-controller@15000000 { + compatible = "mediatek,mt8195-imgsys"; + reg = <0 0x15000000 0 0x1000>; + #clock-cells = <1>; + }; + + imgsys1_dip_top: clock-controller@15110000 { + compatible = "mediatek,mt8195-imgsys1_dip_top"; + reg = <0 0x15110000 0 0x1000>; + #clock-cells = <1>; + }; + + imgsys1_dip_nr: clock-controller@15130000 { + compatible = "mediatek,mt8195-imgsys1_dip_nr"; + reg = <0 0x15130000 0 0x1000>; + #clock-cells = <1>; + }; + + imgsys1_wpe: clock-controller@15220000 { + compatible = "mediatek,mt8195-imgsys1_wpe"; + reg = <0 0x15220000 0 0x1000>; + #clock-cells = <1>; + }; + + ipesys: clock-controller@15330000 { + compatible = "mediatek,mt8195-ipesys"; + reg = <0 0x15330000 0 0x1000>; + #clock-cells = <1>; + }; + + camsys: clock-controller@16000000 { + compatible = "mediatek,mt8195-camsys"; + reg = <0 0x16000000 0 0x1000>; + #clock-cells = <1>; + }; + + camsys_rawa: clock-controller@1604f000 { + compatible = "mediatek,mt8195-camsys_rawa"; + reg = <0 0x1604f000 0 0x1000>; + #clock-cells = <1>; + }; + + camsys_yuva: clock-controller@1606f000 { + compatible = "mediatek,mt8195-camsys_yuva"; + reg = <0 0x1606f000 0 0x1000>; + #clock-cells = <1>; + }; + + camsys_rawb: clock-controller@1608f000 { + compatible = "mediatek,mt8195-camsys_rawb"; + reg = <0 0x1608f000 0 0x1000>; + #clock-cells = <1>; + }; + + camsys_yuvb: clock-controller@160af000 { + compatible = "mediatek,mt8195-camsys_yuvb"; + reg = <0 0x160af000 0 0x1000>; + #clock-cells = <1>; + }; + + camsys_mraw: clock-controller@16140000 { + compatible = "mediatek,mt8195-camsys_mraw"; + reg = <0 0x16140000 0 0x1000>; + #clock-cells = <1>; + }; + + ccusys: clock-controller@17200000 { + compatible = "mediatek,mt8195-ccusys"; + reg = <0 0x17200000 0 0x1000>; + #clock-cells = <1>; + }; + + vdecsys_soc: clock-controller@1800f000 { + compatible = "mediatek,mt8195-vdecsys_soc"; + reg = <0 0x1800f000 0 0x1000>; + #clock-cells = <1>; + }; + + vdecsys: clock-controller@1802f000 { + compatible = "mediatek,mt8195-vdecsys"; + reg = <0 0x1802f000 0 0x1000>; + #clock-cells = <1>; + }; + + vdecsys_core1: clock-controller@1803f000 { + compatible = "mediatek,mt8195-vdecsys_core1"; + reg = <0 0x1803f000 0 0x1000>; + #clock-cells = <1>; + }; + + apusys_pll: clock-controller@190f3000 { + compatible = "mediatek,mt8195-apusys_pll"; + reg = <0 0x190f3000 0 0x1000>; + #clock-cells = <1>; + }; + + vencsys: clock-controller@1a000000 { + compatible = "mediatek,mt8195-vencsys"; + reg = <0 0x1a000000 0 0x1000>; + #clock-cells = <1>; + }; + + vencsys_core1: clock-controller@1b000000 { + compatible = "mediatek,mt8195-vencsys_core1"; + reg = <0 0x1b000000 0 0x1000>; + #clock-cells = <1>; + }; + }; +}; diff --git a/arch/arm64/boot/dts/mediatek/pumpkin-common.dtsi b/arch/arm64/boot/dts/mediatek/pumpkin-common.dtsi index fcddec14738d..7a717f926929 100644 --- a/arch/arm64/boot/dts/mediatek/pumpkin-common.dtsi +++ b/arch/arm64/boot/dts/mediatek/pumpkin-common.dtsi @@ -25,7 +25,6 @@ gpio-keys { compatible = "gpio-keys"; - input-name = "gpio-keys"; pinctrl-names = "default"; pinctrl-0 = <&gpio_keys_default>; diff --git a/arch/arm64/boot/dts/microchip/sparx5_nand.dtsi b/arch/arm64/boot/dts/microchip/sparx5_nand.dtsi index 03f107e427d7..ce0747fd6444 100644 --- a/arch/arm64/boot/dts/microchip/sparx5_nand.dtsi +++ b/arch/arm64/boot/dts/microchip/sparx5_nand.dtsi @@ -19,7 +19,7 @@ #address-cells = <1>; #size-cells = <0>; reg = <14>; /* CS14 */ - spi-flash@6 { + flash@6 { compatible = "spi-nand"; pinctrl-0 = <&cs14_pins>; pinctrl-names = "default"; diff --git a/arch/arm64/boot/dts/microchip/sparx5_pcb125.dts b/arch/arm64/boot/dts/microchip/sparx5_pcb125.dts index 9baa085d7861..dbf8c1d48a02 100644 --- a/arch/arm64/boot/dts/microchip/sparx5_pcb125.dts +++ b/arch/arm64/boot/dts/microchip/sparx5_pcb125.dts @@ -47,7 +47,7 @@ #address-cells = <1>; #size-cells = <0>; reg = <0>; /* CS0 */ - spi-flash@9 { + flash@9 { compatible = "jedec,spi-nor"; spi-max-frequency = <8000000>; reg = <0x9>; /* SPI */ @@ -59,7 +59,7 @@ #address-cells = <1>; #size-cells = <0>; reg = <1>; /* CS1 */ - spi-flash@9 { + flash@9 { compatible = "spi-nand"; pinctrl-0 = <&cs1_pins>; pinctrl-names = "default"; diff --git a/arch/arm64/boot/dts/microchip/sparx5_pcb134_board.dtsi b/arch/arm64/boot/dts/microchip/sparx5_pcb134_board.dtsi index 33faf1f3264f..699256f1b9d8 100644 --- a/arch/arm64/boot/dts/microchip/sparx5_pcb134_board.dtsi +++ b/arch/arm64/boot/dts/microchip/sparx5_pcb134_board.dtsi @@ -274,7 +274,7 @@ &spi0 { status = "okay"; - spi-flash@0 { + flash@0 { compatible = "jedec,spi-nor"; spi-max-frequency = <8000000>; reg = <0>; @@ -289,7 +289,7 @@ #address-cells = <1>; #size-cells = <0>; reg = <0>; /* CS0 */ - spi-flash@9 { + flash@9 { compatible = "jedec,spi-nor"; spi-max-frequency = <8000000>; reg = <0x9>; /* SPI */ diff --git a/arch/arm64/boot/dts/microchip/sparx5_pcb135_board.dtsi b/arch/arm64/boot/dts/microchip/sparx5_pcb135_board.dtsi index ef96e6d8c6b3..d10a9172b529 100644 --- a/arch/arm64/boot/dts/microchip/sparx5_pcb135_board.dtsi +++ b/arch/arm64/boot/dts/microchip/sparx5_pcb135_board.dtsi @@ -89,7 +89,7 @@ &spi0 { status = "okay"; - spi-flash@0 { + flash@0 { compatible = "jedec,spi-nor"; spi-max-frequency = <8000000>; reg = <0>; @@ -104,7 +104,7 @@ #address-cells = <1>; #size-cells = <0>; reg = <0>; /* CS0 */ - spi-flash@9 { + flash@9 { compatible = "jedec,spi-nor"; spi-max-frequency = <8000000>; reg = <0x9>; /* SPI */ diff --git a/arch/arm64/boot/dts/nvidia/tegra186-p2771-0000.dts b/arch/arm64/boot/dts/nvidia/tegra186-p2771-0000.dts index c4dee05f330c..70737a09a9b8 100644 --- a/arch/arm64/boot/dts/nvidia/tegra186-p2771-0000.dts +++ b/arch/arm64/boot/dts/nvidia/tegra186-p2771-0000.dts @@ -811,6 +811,110 @@ remote-endpoint = <&mixer_out5_ep>; }; }; + + xbar_asrc_in1_port: port@63 { + reg = <0x63>; + + xbar_asrc_in1_ep: endpoint { + remote-endpoint = <&asrc_in1_ep>; + }; + }; + + port@64 { + reg = <0x64>; + + xbar_asrc_out1_ep: endpoint { + remote-endpoint = <&asrc_out1_ep>; + }; + }; + + xbar_asrc_in2_port: port@65 { + reg = <0x65>; + + xbar_asrc_in2_ep: endpoint { + remote-endpoint = <&asrc_in2_ep>; + }; + }; + + port@66 { + reg = <0x66>; + + xbar_asrc_out2_ep: endpoint { + remote-endpoint = <&asrc_out2_ep>; + }; + }; + + xbar_asrc_in3_port: port@67 { + reg = <0x67>; + + xbar_asrc_in3_ep: endpoint { + remote-endpoint = <&asrc_in3_ep>; + }; + }; + + port@68 { + reg = <0x68>; + + xbar_asrc_out3_ep: endpoint { + remote-endpoint = <&asrc_out3_ep>; + }; + }; + + xbar_asrc_in4_port: port@69 { + reg = <0x69>; + + xbar_asrc_in4_ep: endpoint { + remote-endpoint = <&asrc_in4_ep>; + }; + }; + + port@6a { + reg = <0x6a>; + + xbar_asrc_out4_ep: endpoint { + remote-endpoint = <&asrc_out4_ep>; + }; + }; + + xbar_asrc_in5_port: port@6b { + reg = <0x6b>; + + xbar_asrc_in5_ep: endpoint { + remote-endpoint = <&asrc_in5_ep>; + }; + }; + + port@6c { + reg = <0x6c>; + + xbar_asrc_out5_ep: endpoint { + remote-endpoint = <&asrc_out5_ep>; + }; + }; + + xbar_asrc_in6_port: port@6d { + reg = <0x6d>; + + xbar_asrc_in6_ep: endpoint { + remote-endpoint = <&asrc_in6_ep>; + }; + }; + + port@6e { + reg = <0x6e>; + + xbar_asrc_out6_ep: endpoint { + remote-endpoint = <&asrc_out6_ep>; + }; + }; + + xbar_asrc_in7_port: port@6f { + reg = <0x6f>; + + xbar_asrc_in7_ep: endpoint { + remote-endpoint = <&asrc_in7_ep>; + }; + }; }; admaif@290f000 { @@ -1935,6 +2039,119 @@ }; }; }; + + asrc@2910000 { + status = "okay"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0x0>; + + asrc_in1_ep: endpoint { + remote-endpoint = <&xbar_asrc_in1_ep>; + }; + }; + + port@1 { + reg = <0x1>; + + asrc_in2_ep: endpoint { + remote-endpoint = <&xbar_asrc_in2_ep>; + }; + }; + + port@2 { + reg = <0x2>; + + asrc_in3_ep: endpoint { + remote-endpoint = <&xbar_asrc_in3_ep>; + }; + }; + + port@3 { + reg = <0x3>; + + asrc_in4_ep: endpoint { + remote-endpoint = <&xbar_asrc_in4_ep>; + }; + }; + + port@4 { + reg = <0x4>; + + asrc_in5_ep: endpoint { + remote-endpoint = <&xbar_asrc_in5_ep>; + }; + }; + + port@5 { + reg = <0x5>; + + asrc_in6_ep: endpoint { + remote-endpoint = <&xbar_asrc_in6_ep>; + }; + }; + + port@6 { + reg = <0x6>; + + asrc_in7_ep: endpoint { + remote-endpoint = <&xbar_asrc_in7_ep>; + }; + }; + + asrc_out1_port: port@7 { + reg = <0x7>; + + asrc_out1_ep: endpoint { + remote-endpoint = <&xbar_asrc_out1_ep>; + }; + }; + + asrc_out2_port: port@8 { + reg = <0x8>; + + asrc_out2_ep: endpoint { + remote-endpoint = <&xbar_asrc_out2_ep>; + }; + }; + + asrc_out3_port: port@9 { + reg = <0x9>; + + asrc_out3_ep: endpoint { + remote-endpoint = <&xbar_asrc_out3_ep>; + }; + }; + + asrc_out4_port: port@a { + reg = <0xa>; + + asrc_out4_ep: endpoint { + remote-endpoint = <&xbar_asrc_out4_ep>; + }; + }; + + asrc_out5_port: port@b { + reg = <0xb>; + + asrc_out5_ep: endpoint { + remote-endpoint = <&xbar_asrc_out5_ep>; + }; + }; + + asrc_out6_port: port@c { + reg = <0xc>; + + asrc_out6_ep: endpoint { + remote-endpoint = <&xbar_asrc_out6_ep>; + }; + }; + }; + }; }; }; @@ -2331,6 +2548,10 @@ <&xbar_mixer_in5_port>, <&xbar_mixer_in6_port>, <&xbar_mixer_in7_port>, <&xbar_mixer_in8_port>, <&xbar_mixer_in9_port>, <&xbar_mixer_in10_port>, + <&xbar_asrc_in1_port>, <&xbar_asrc_in2_port>, + <&xbar_asrc_in3_port>, <&xbar_asrc_in4_port>, + <&xbar_asrc_in5_port>, <&xbar_asrc_in6_port>, + <&xbar_asrc_in7_port>, /* HW accelerators */ <&sfc1_out_port>, <&sfc2_out_port>, <&sfc3_out_port>, <&sfc4_out_port>, @@ -2348,6 +2569,8 @@ <&mixer_out1_port>, <&mixer_out2_port>, <&mixer_out3_port>, <&mixer_out4_port>, <&mixer_out5_port>, + <&asrc_out1_port>, <&asrc_out2_port>, <&asrc_out3_port>, + <&asrc_out4_port>, <&asrc_out5_port>, <&asrc_out6_port>, /* I/O */ <&i2s1_port>, <&i2s2_port>, <&i2s3_port>, <&i2s4_port>, <&i2s5_port>, <&i2s6_port>, <&dmic1_port>, <&dmic2_port>, diff --git a/arch/arm64/boot/dts/nvidia/tegra186-p3509-0000+p3636-0001.dts b/arch/arm64/boot/dts/nvidia/tegra186-p3509-0000+p3636-0001.dts index 4631504c3c7a..7e9aad9ff177 100644 --- a/arch/arm64/boot/dts/nvidia/tegra186-p3509-0000+p3636-0001.dts +++ b/arch/arm64/boot/dts/nvidia/tegra186-p3509-0000+p3636-0001.dts @@ -349,7 +349,7 @@ status = "okay"; }; - fan: fan { + fan: pwm-fan { compatible = "pwm-fan"; pwms = <&pwm4 0 45334>; diff --git a/arch/arm64/boot/dts/nvidia/tegra186.dtsi b/arch/arm64/boot/dts/nvidia/tegra186.dtsi index e9b40f5d79ec..0e9afc3e2f26 100644 --- a/arch/arm64/boot/dts/nvidia/tegra186.dtsi +++ b/arch/arm64/boot/dts/nvidia/tegra186.dtsi @@ -516,12 +516,25 @@ sound-name-prefix = "MIXER1"; status = "disabled"; }; + + tegra_asrc: asrc@2910000 { + compatible = "nvidia,tegra186-asrc"; + reg = <0x2910000 0x2000>; + sound-name-prefix = "ASRC1"; + status = "disabled"; + }; }; }; mc: memory-controller@2c00000 { compatible = "nvidia,tegra186-mc"; - reg = <0x0 0x02c00000 0x0 0xb0000>; + reg = <0x0 0x02c00000 0x0 0x10000>, /* MC-SID */ + <0x0 0x02c10000 0x0 0x10000>, /* Broadcast channel */ + <0x0 0x02c20000 0x0 0x10000>, /* MC0 */ + <0x0 0x02c30000 0x0 0x10000>, /* MC1 */ + <0x0 0x02c40000 0x0 0x10000>, /* MC2 */ + <0x0 0x02c50000 0x0 0x10000>; /* MC3 */ + reg-names = "sid", "broadcast", "ch0", "ch1", "ch2", "ch3"; interrupts = <GIC_SPI 223 IRQ_TYPE_LEVEL_HIGH>; status = "disabled"; diff --git a/arch/arm64/boot/dts/nvidia/tegra194-p2972-0000.dts b/arch/arm64/boot/dts/nvidia/tegra194-p2972-0000.dts index 2478ece9e67c..bce518ace6a0 100644 --- a/arch/arm64/boot/dts/nvidia/tegra194-p2972-0000.dts +++ b/arch/arm64/boot/dts/nvidia/tegra194-p2972-0000.dts @@ -764,6 +764,110 @@ remote-endpoint = <&mixer_out5_ep>; }; }; + + xbar_asrc_in1_port: port@63 { + reg = <0x63>; + + xbar_asrc_in1_ep: endpoint { + remote-endpoint = <&asrc_in1_ep>; + }; + }; + + port@64 { + reg = <0x64>; + + xbar_asrc_out1_ep: endpoint { + remote-endpoint = <&asrc_out1_ep>; + }; + }; + + xbar_asrc_in2_port: port@65 { + reg = <0x65>; + + xbar_asrc_in2_ep: endpoint { + remote-endpoint = <&asrc_in2_ep>; + }; + }; + + port@66 { + reg = <0x66>; + + xbar_asrc_out2_ep: endpoint { + remote-endpoint = <&asrc_out2_ep>; + }; + }; + + xbar_asrc_in3_port: port@67 { + reg = <0x67>; + + xbar_asrc_in3_ep: endpoint { + remote-endpoint = <&asrc_in3_ep>; + }; + }; + + port@68 { + reg = <0x68>; + + xbar_asrc_out3_ep: endpoint { + remote-endpoint = <&asrc_out3_ep>; + }; + }; + + xbar_asrc_in4_port: port@69 { + reg = <0x69>; + + xbar_asrc_in4_ep: endpoint { + remote-endpoint = <&asrc_in4_ep>; + }; + }; + + port@6a { + reg = <0x6a>; + + xbar_asrc_out4_ep: endpoint { + remote-endpoint = <&asrc_out4_ep>; + }; + }; + + xbar_asrc_in5_port: port@6b { + reg = <0x6b>; + + xbar_asrc_in5_ep: endpoint { + remote-endpoint = <&asrc_in5_ep>; + }; + }; + + port@6c { + reg = <0x6c>; + + xbar_asrc_out5_ep: endpoint { + remote-endpoint = <&asrc_out5_ep>; + }; + }; + + xbar_asrc_in6_port: port@6d { + reg = <0x6d>; + + xbar_asrc_in6_ep: endpoint { + remote-endpoint = <&asrc_in6_ep>; + }; + }; + + port@6e { + reg = <0x6e>; + + xbar_asrc_out6_ep: endpoint { + remote-endpoint = <&asrc_out6_ep>; + }; + }; + + xbar_asrc_in7_port: port@6f { + reg = <0x6f>; + + xbar_asrc_in7_ep: endpoint { + remote-endpoint = <&asrc_in7_ep>; + }; + }; }; admaif@290f000 { @@ -1734,6 +1838,119 @@ }; }; }; + + asrc@2910000 { + status = "okay"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0x0>; + + asrc_in1_ep: endpoint { + remote-endpoint = <&xbar_asrc_in1_ep>; + }; + }; + + port@1 { + reg = <0x1>; + + asrc_in2_ep: endpoint { + remote-endpoint = <&xbar_asrc_in2_ep>; + }; + }; + + port@2 { + reg = <0x2>; + + asrc_in3_ep: endpoint { + remote-endpoint = <&xbar_asrc_in3_ep>; + }; + }; + + port@3 { + reg = <0x3>; + + asrc_in4_ep: endpoint { + remote-endpoint = <&xbar_asrc_in4_ep>; + }; + }; + + port@4 { + reg = <0x4>; + + asrc_in5_ep: endpoint { + remote-endpoint = <&xbar_asrc_in5_ep>; + }; + }; + + port@5 { + reg = <0x5>; + + asrc_in6_ep: endpoint { + remote-endpoint = <&xbar_asrc_in6_ep>; + }; + }; + + port@6 { + reg = <0x6>; + + asrc_in7_ep: endpoint { + remote-endpoint = <&xbar_asrc_in7_ep>; + }; + }; + + asrc_out1_port: port@7 { + reg = <0x7>; + + asrc_out1_ep: endpoint { + remote-endpoint = <&xbar_asrc_out1_ep>; + }; + }; + + asrc_out2_port: port@8 { + reg = <0x8>; + + asrc_out2_ep: endpoint { + remote-endpoint = <&xbar_asrc_out2_ep>; + }; + }; + + asrc_out3_port: port@9 { + reg = <0x9>; + + asrc_out3_ep: endpoint { + remote-endpoint = <&xbar_asrc_out3_ep>; + }; + }; + + asrc_out4_port: port@a { + reg = <0xa>; + + asrc_out4_ep: endpoint { + remote-endpoint = <&xbar_asrc_out4_ep>; + }; + }; + + asrc_out5_port: port@b { + reg = <0xb>; + + asrc_out5_ep: endpoint { + remote-endpoint = <&xbar_asrc_out5_ep>; + }; + }; + + asrc_out6_port: port@c { + reg = <0xc>; + + asrc_out6_ep: endpoint { + remote-endpoint = <&xbar_asrc_out6_ep>; + }; + }; + }; + }; }; }; @@ -1989,7 +2206,7 @@ "p2u-5", "p2u-6", "p2u-7"; }; - fan: fan { + fan: pwm-fan { compatible = "pwm-fan"; pwms = <&pwm4 0 45334>; @@ -2052,6 +2269,10 @@ <&xbar_mixer_in5_port>, <&xbar_mixer_in6_port>, <&xbar_mixer_in7_port>, <&xbar_mixer_in8_port>, <&xbar_mixer_in9_port>, <&xbar_mixer_in10_port>, + <&xbar_asrc_in1_port>, <&xbar_asrc_in2_port>, + <&xbar_asrc_in3_port>, <&xbar_asrc_in4_port>, + <&xbar_asrc_in5_port>, <&xbar_asrc_in6_port>, + <&xbar_asrc_in7_port>, /* HW accelerators */ <&sfc1_out_port>, <&sfc2_out_port>, <&sfc3_out_port>, <&sfc4_out_port>, @@ -2068,6 +2289,8 @@ <&adx4_out3_port>, <&adx4_out4_port>, <&mixer_out1_port>, <&mixer_out2_port>, <&mixer_out3_port>, <&mixer_out4_port>, <&mixer_out5_port>, + <&asrc_out1_port>, <&asrc_out2_port>, <&asrc_out3_port>, + <&asrc_out4_port>, <&asrc_out5_port>, <&asrc_out6_port>, /* BE I/O Ports */ <&i2s1_port>, <&i2s2_port>, <&i2s4_port>, <&i2s6_port>, <&dmic3_port>; diff --git a/arch/arm64/boot/dts/nvidia/tegra194-p3509-0000.dtsi b/arch/arm64/boot/dts/nvidia/tegra194-p3509-0000.dtsi index 32ce7904f44f..7acc32dd290a 100644 --- a/arch/arm64/boot/dts/nvidia/tegra194-p3509-0000.dtsi +++ b/arch/arm64/boot/dts/nvidia/tegra194-p3509-0000.dtsi @@ -774,6 +774,110 @@ remote-endpoint = <&mixer_out5_ep>; }; }; + + xbar_asrc_in1_port: port@63 { + reg = <0x63>; + + xbar_asrc_in1_ep: endpoint { + remote-endpoint = <&asrc_in1_ep>; + }; + }; + + port@64 { + reg = <0x64>; + + xbar_asrc_out1_ep: endpoint { + remote-endpoint = <&asrc_out1_ep>; + }; + }; + + xbar_asrc_in2_port: port@65 { + reg = <0x65>; + + xbar_asrc_in2_ep: endpoint { + remote-endpoint = <&asrc_in2_ep>; + }; + }; + + port@66 { + reg = <0x66>; + + xbar_asrc_out2_ep: endpoint { + remote-endpoint = <&asrc_out2_ep>; + }; + }; + + xbar_asrc_in3_port: port@67 { + reg = <0x67>; + + xbar_asrc_in3_ep: endpoint { + remote-endpoint = <&asrc_in3_ep>; + }; + }; + + port@68 { + reg = <0x68>; + + xbar_asrc_out3_ep: endpoint { + remote-endpoint = <&asrc_out3_ep>; + }; + }; + + xbar_asrc_in4_port: port@69 { + reg = <0x69>; + + xbar_asrc_in4_ep: endpoint { + remote-endpoint = <&asrc_in4_ep>; + }; + }; + + port@6a { + reg = <0x6a>; + + xbar_asrc_out4_ep: endpoint { + remote-endpoint = <&asrc_out4_ep>; + }; + }; + + xbar_asrc_in5_port: port@6b { + reg = <0x6b>; + + xbar_asrc_in5_ep: endpoint { + remote-endpoint = <&asrc_in5_ep>; + }; + }; + + port@6c { + reg = <0x6c>; + + xbar_asrc_out5_ep: endpoint { + remote-endpoint = <&asrc_out5_ep>; + }; + }; + + xbar_asrc_in6_port: port@6d { + reg = <0x6d>; + + xbar_asrc_in6_ep: endpoint { + remote-endpoint = <&asrc_in6_ep>; + }; + }; + + port@6e { + reg = <0x6e>; + + xbar_asrc_out6_ep: endpoint { + remote-endpoint = <&asrc_out6_ep>; + }; + }; + + xbar_asrc_in7_port: port@6f { + reg = <0x6f>; + + xbar_asrc_in7_ep: endpoint { + remote-endpoint = <&asrc_in7_ep>; + }; + }; }; admaif@290f000 { @@ -1794,6 +1898,119 @@ }; }; }; + + asrc@2910000 { + status = "okay"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0x0>; + + asrc_in1_ep: endpoint { + remote-endpoint = <&xbar_asrc_in1_ep>; + }; + }; + + port@1 { + reg = <0x1>; + + asrc_in2_ep: endpoint { + remote-endpoint = <&xbar_asrc_in2_ep>; + }; + }; + + port@2 { + reg = <0x2>; + + asrc_in3_ep: endpoint { + remote-endpoint = <&xbar_asrc_in3_ep>; + }; + }; + + port@3 { + reg = <0x3>; + + asrc_in4_ep: endpoint { + remote-endpoint = <&xbar_asrc_in4_ep>; + }; + }; + + port@4 { + reg = <0x4>; + + asrc_in5_ep: endpoint { + remote-endpoint = <&xbar_asrc_in5_ep>; + }; + }; + + port@5 { + reg = <0x5>; + + asrc_in6_ep: endpoint { + remote-endpoint = <&xbar_asrc_in6_ep>; + }; + }; + + port@6 { + reg = <0x6>; + + asrc_in7_ep: endpoint { + remote-endpoint = <&xbar_asrc_in7_ep>; + }; + }; + + asrc_out1_port: port@7 { + reg = <0x7>; + + asrc_out1_ep: endpoint { + remote-endpoint = <&xbar_asrc_out1_ep>; + }; + }; + + asrc_out2_port: port@8 { + reg = <0x8>; + + asrc_out2_ep: endpoint { + remote-endpoint = <&xbar_asrc_out2_ep>; + }; + }; + + asrc_out3_port: port@9 { + reg = <0x9>; + + asrc_out3_ep: endpoint { + remote-endpoint = <&xbar_asrc_out3_ep>; + }; + }; + + asrc_out4_port: port@a { + reg = <0xa>; + + asrc_out4_ep: endpoint { + remote-endpoint = <&xbar_asrc_out4_ep>; + }; + }; + + asrc_out5_port: port@b { + reg = <0xb>; + + asrc_out5_ep: endpoint { + remote-endpoint = <&xbar_asrc_out5_ep>; + }; + }; + + asrc_out6_port: port@c { + reg = <0xc>; + + asrc_out6_ep: endpoint { + remote-endpoint = <&xbar_asrc_out6_ep>; + }; + }; + }; + }; }; }; @@ -1993,7 +2210,7 @@ "p2u-5", "p2u-6", "p2u-7"; }; - fan: fan { + fan: pwm-fan { compatible = "pwm-fan"; pwms = <&pwm6 0 45334>; @@ -2102,6 +2319,10 @@ <&xbar_mixer_in5_port>, <&xbar_mixer_in6_port>, <&xbar_mixer_in7_port>, <&xbar_mixer_in8_port>, <&xbar_mixer_in9_port>, <&xbar_mixer_in10_port>, + <&xbar_asrc_in1_port>, <&xbar_asrc_in2_port>, + <&xbar_asrc_in3_port>, <&xbar_asrc_in4_port>, + <&xbar_asrc_in5_port>, <&xbar_asrc_in6_port>, + <&xbar_asrc_in7_port>, /* HW accelerators */ <&sfc1_out_port>, <&sfc2_out_port>, <&sfc3_out_port>, <&sfc4_out_port>, @@ -2119,6 +2340,8 @@ <&mixer_out1_port>, <&mixer_out2_port>, <&mixer_out3_port>, <&mixer_out4_port>, <&mixer_out5_port>, + <&asrc_out1_port>, <&asrc_out2_port>, <&asrc_out3_port>, + <&asrc_out4_port>, <&asrc_out5_port>, <&asrc_out6_port>, /* BE I/O Ports */ <&i2s3_port>, <&i2s5_port>, <&dmic1_port>, <&dmic2_port>, <&dmic4_port>, diff --git a/arch/arm64/boot/dts/nvidia/tegra194.dtsi b/arch/arm64/boot/dts/nvidia/tegra194.dtsi index 751ebe5e9506..d1f8248c00f4 100644 --- a/arch/arm64/boot/dts/nvidia/tegra194.dtsi +++ b/arch/arm64/boot/dts/nvidia/tegra194.dtsi @@ -569,6 +569,14 @@ sound-name-prefix = "MIXER1"; status = "disabled"; }; + + tegra_asrc: asrc@2910000 { + compatible = "nvidia,tegra194-asrc", + "nvidia,tegra186-asrc"; + reg = <0x2910000 0x2000>; + sound-name-prefix = "ASRC1"; + status = "disabled"; + }; }; }; @@ -604,9 +612,27 @@ mc: memory-controller@2c00000 { compatible = "nvidia,tegra194-mc"; - reg = <0x02c00000 0x100000>, - <0x02b80000 0x040000>, - <0x01700000 0x100000>; + reg = <0x02c00000 0x10000>, /* MC-SID */ + <0x02c10000 0x10000>, /* MC Broadcast*/ + <0x02c20000 0x10000>, /* MC0 */ + <0x02c30000 0x10000>, /* MC1 */ + <0x02c40000 0x10000>, /* MC2 */ + <0x02c50000 0x10000>, /* MC3 */ + <0x02b80000 0x10000>, /* MC4 */ + <0x02b90000 0x10000>, /* MC5 */ + <0x02ba0000 0x10000>, /* MC6 */ + <0x02bb0000 0x10000>, /* MC7 */ + <0x01700000 0x10000>, /* MC8 */ + <0x01710000 0x10000>, /* MC9 */ + <0x01720000 0x10000>, /* MC10 */ + <0x01730000 0x10000>, /* MC11 */ + <0x01740000 0x10000>, /* MC12 */ + <0x01750000 0x10000>, /* MC13 */ + <0x01760000 0x10000>, /* MC14 */ + <0x01770000 0x10000>; /* MC15 */ + reg-names = "sid", "broadcast", "ch0", "ch1", "ch2", "ch3", + "ch4", "ch5", "ch6", "ch7", "ch8", "ch9", "ch10", + "ch11", "ch12", "ch13", "ch14", "ch15"; interrupts = <GIC_SPI 223 IRQ_TYPE_LEVEL_HIGH>; #interconnect-cells = <1>; status = "disabled"; @@ -934,6 +960,11 @@ clocks = <&bpmp TEGRA194_CLK_SDMMC1>, <&bpmp TEGRA194_CLK_SDMMC_LEGACY_TM>; clock-names = "sdhci", "tmclk"; + assigned-clocks = <&bpmp TEGRA194_CLK_SDMMC1>, + <&bpmp TEGRA194_CLK_PLLC4_MUXED>; + assigned-clock-parents = + <&bpmp TEGRA194_CLK_PLLC4_MUXED>, + <&bpmp TEGRA194_CLK_PLLC4_VCO_DIV2>; resets = <&bpmp TEGRA194_RESET_SDMMC1>; reset-names = "sdhci"; interconnects = <&mc TEGRA194_MEMORY_CLIENT_SDMMCRA &emc>, @@ -968,6 +999,11 @@ clocks = <&bpmp TEGRA194_CLK_SDMMC3>, <&bpmp TEGRA194_CLK_SDMMC_LEGACY_TM>; clock-names = "sdhci", "tmclk"; + assigned-clocks = <&bpmp TEGRA194_CLK_SDMMC3>, + <&bpmp TEGRA194_CLK_PLLC4_MUXED>; + assigned-clock-parents = + <&bpmp TEGRA194_CLK_PLLC4_MUXED>, + <&bpmp TEGRA194_CLK_PLLC4_VCO_DIV2>; resets = <&bpmp TEGRA194_RESET_SDMMC3>; reset-names = "sdhci"; interconnects = <&mc TEGRA194_MEMORY_CLIENT_SDMMCR &emc>, diff --git a/arch/arm64/boot/dts/nvidia/tegra210-p3450-0000.dts b/arch/arm64/boot/dts/nvidia/tegra210-p3450-0000.dts index 72c2dc3c14ea..746bd52ea3f7 100644 --- a/arch/arm64/boot/dts/nvidia/tegra210-p3450-0000.dts +++ b/arch/arm64/boot/dts/nvidia/tegra210-p3450-0000.dts @@ -1657,7 +1657,7 @@ }; }; - fan: fan { + fan: pwm-fan { compatible = "pwm-fan"; pwms = <&pwm 3 45334>; diff --git a/arch/arm64/boot/dts/nvidia/tegra210.dtsi b/arch/arm64/boot/dts/nvidia/tegra210.dtsi index 218a2b32200f..4f0e51f1a343 100644 --- a/arch/arm64/boot/dts/nvidia/tegra210.dtsi +++ b/arch/arm64/boot/dts/nvidia/tegra210.dtsi @@ -1366,8 +1366,9 @@ <&tegra_car TEGRA210_CLK_DFLL_REF>, <&tegra_car TEGRA210_CLK_I2C5>; clock-names = "soc", "ref", "i2c"; - resets = <&tegra_car TEGRA210_RST_DFLL_DVCO>; - reset-names = "dvco"; + resets = <&tegra_car TEGRA210_RST_DFLL_DVCO>, + <&tegra_car 155>; + reset-names = "dvco", "dfll"; #clock-cells = <0>; clock-output-names = "dfllCPU_out"; status = "disabled"; diff --git a/arch/arm64/boot/dts/nvidia/tegra234-p3701-0000.dtsi b/arch/arm64/boot/dts/nvidia/tegra234-p3701-0000.dtsi index d95a542c0bca..798de9226ba5 100644 --- a/arch/arm64/boot/dts/nvidia/tegra234-p3701-0000.dtsi +++ b/arch/arm64/boot/dts/nvidia/tegra234-p3701-0000.dtsi @@ -7,6 +7,18 @@ compatible = "nvidia,p3701-0000", "nvidia,tegra234"; bus@0 { + spi@3270000 { + status = "okay"; + + flash@0 { + compatible = "jedec,spi-nor"; + reg = <0>; + spi-max-frequency = <102000000>; + spi-tx-bus-width = <4>; + spi-rx-bus-width = <4>; + }; + }; + mmc@3460000 { status = "okay"; bus-width = <8>; diff --git a/arch/arm64/boot/dts/nvidia/tegra234-p3737-0000+p3701-0000.dts b/arch/arm64/boot/dts/nvidia/tegra234-p3737-0000+p3701-0000.dts index 34d6a01ee1c6..eaf1994abb04 100644 --- a/arch/arm64/boot/dts/nvidia/tegra234-p3737-0000+p3701-0000.dts +++ b/arch/arm64/boot/dts/nvidia/tegra234-p3737-0000+p3701-0000.dts @@ -763,6 +763,110 @@ remote-endpoint = <&mix_out5>; }; }; + + xbar_asrc_in1_port: port@63 { + reg = <0x63>; + + xbar_asrc_in1_ep: endpoint { + remote-endpoint = <&asrc_in1_ep>; + }; + }; + + port@64 { + reg = <0x64>; + + xbar_asrc_out1_ep: endpoint { + remote-endpoint = <&asrc_out1_ep>; + }; + }; + + xbar_asrc_in2_port: port@65 { + reg = <0x65>; + + xbar_asrc_in2_ep: endpoint { + remote-endpoint = <&asrc_in2_ep>; + }; + }; + + port@66 { + reg = <0x66>; + + xbar_asrc_out2_ep: endpoint { + remote-endpoint = <&asrc_out2_ep>; + }; + }; + + xbar_asrc_in3_port: port@67 { + reg = <0x67>; + + xbar_asrc_in3_ep: endpoint { + remote-endpoint = <&asrc_in3_ep>; + }; + }; + + port@68 { + reg = <0x68>; + + xbar_asrc_out3_ep: endpoint { + remote-endpoint = <&asrc_out3_ep>; + }; + }; + + xbar_asrc_in4_port: port@69 { + reg = <0x69>; + + xbar_asrc_in4_ep: endpoint { + remote-endpoint = <&asrc_in4_ep>; + }; + }; + + port@6a { + reg = <0x6a>; + + xbar_asrc_out4_ep: endpoint { + remote-endpoint = <&asrc_out4_ep>; + }; + }; + + xbar_asrc_in5_port: port@6b { + reg = <0x6b>; + + xbar_asrc_in5_ep: endpoint { + remote-endpoint = <&asrc_in5_ep>; + }; + }; + + port@6c { + reg = <0x6c>; + + xbar_asrc_out5_ep: endpoint { + remote-endpoint = <&asrc_out5_ep>; + }; + }; + + xbar_asrc_in6_port: port@6d { + reg = <0x6d>; + + xbar_asrc_in6_ep: endpoint { + remote-endpoint = <&asrc_in6_ep>; + }; + }; + + port@6e { + reg = <0x6e>; + + xbar_asrc_out6_ep: endpoint { + remote-endpoint = <&asrc_out6_ep>; + }; + }; + + xbar_asrc_in7_port: port@6f { + reg = <0x6f>; + + xbar_asrc_in7_ep: endpoint { + remote-endpoint = <&asrc_in7_ep>; + }; + }; }; i2s@2901000 { @@ -1733,6 +1837,119 @@ }; }; }; + + asrc@2910000 { + status = "okay"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0x0>; + + asrc_in1_ep: endpoint { + remote-endpoint = <&xbar_asrc_in1_ep>; + }; + }; + + port@1 { + reg = <0x1>; + + asrc_in2_ep: endpoint { + remote-endpoint = <&xbar_asrc_in2_ep>; + }; + }; + + port@2 { + reg = <0x2>; + + asrc_in3_ep: endpoint { + remote-endpoint = <&xbar_asrc_in3_ep>; + }; + }; + + port@3 { + reg = <0x3>; + + asrc_in4_ep: endpoint { + remote-endpoint = <&xbar_asrc_in4_ep>; + }; + }; + + port@4 { + reg = <0x4>; + + asrc_in5_ep: endpoint { + remote-endpoint = <&xbar_asrc_in5_ep>; + }; + }; + + port@5 { + reg = <0x5>; + + asrc_in6_ep: endpoint { + remote-endpoint = <&xbar_asrc_in6_ep>; + }; + }; + + port@6 { + reg = <0x6>; + + asrc_in7_ep: endpoint { + remote-endpoint = <&xbar_asrc_in7_ep>; + }; + }; + + asrc_out1_port: port@7 { + reg = <0x7>; + + asrc_out1_ep: endpoint { + remote-endpoint = <&xbar_asrc_out1_ep>; + }; + }; + + asrc_out2_port: port@8 { + reg = <0x8>; + + asrc_out2_ep: endpoint { + remote-endpoint = <&xbar_asrc_out2_ep>; + }; + }; + + asrc_out3_port: port@9 { + reg = <0x9>; + + asrc_out3_ep: endpoint { + remote-endpoint = <&xbar_asrc_out3_ep>; + }; + }; + + asrc_out4_port: port@a { + reg = <0xa>; + + asrc_out4_ep: endpoint { + remote-endpoint = <&xbar_asrc_out4_ep>; + }; + }; + + asrc_out5_port: port@b { + reg = <0xb>; + + asrc_out5_ep: endpoint { + remote-endpoint = <&xbar_asrc_out5_ep>; + }; + }; + + asrc_out6_port: port@c { + reg = <0xc>; + + asrc_out6_ep: endpoint { + remote-endpoint = <&xbar_asrc_out6_ep>; + }; + }; + }; + }; }; dma-controller@2930000 { @@ -1823,6 +2040,10 @@ <&xbar_mix_in5_port>, <&xbar_mix_in6_port>, <&xbar_mix_in7_port>, <&xbar_mix_in8_port>, <&xbar_mix_in9_port>, <&xbar_mix_in10_port>, + <&xbar_asrc_in1_port>, <&xbar_asrc_in2_port>, + <&xbar_asrc_in3_port>, <&xbar_asrc_in4_port>, + <&xbar_asrc_in5_port>, <&xbar_asrc_in6_port>, + <&xbar_asrc_in7_port>, /* HW accelerators */ <&sfc1_out_port>, <&sfc2_out_port>, <&sfc3_out_port>, <&sfc4_out_port>, @@ -1839,6 +2060,8 @@ <&adx4_out3_port>, <&adx4_out4_port>, <&mix_out1_port>, <&mix_out2_port>, <&mix_out3_port>, <&mix_out4_port>, <&mix_out5_port>, + <&asrc_out1_port>, <&asrc_out2_port>, <&asrc_out3_port>, + <&asrc_out4_port>, <&asrc_out5_port>, <&asrc_out6_port>, /* BE I/O Ports */ <&i2s1_port>, <&i2s2_port>, <&i2s4_port>, <&i2s6_port>, <&dmic3_port>; diff --git a/arch/arm64/boot/dts/nvidia/tegra234.dtsi b/arch/arm64/boot/dts/nvidia/tegra234.dtsi index aaace605bdaa..cb3af539e477 100644 --- a/arch/arm64/boot/dts/nvidia/tegra234.dtsi +++ b/arch/arm64/boot/dts/nvidia/tegra234.dtsi @@ -378,6 +378,14 @@ iommus = <&smmu_niso0 TEGRA234_SID_APE>; status = "disabled"; }; + + tegra_asrc: asrc@2910000 { + compatible = "nvidia,tegra234-asrc", + "nvidia,tegra186-asrc"; + reg = <0x2910000 0x2000>; + sound-name-prefix = "ASRC1"; + status = "disabled"; + }; }; adma: dma-controller@2930000 { @@ -507,9 +515,27 @@ mc: memory-controller@2c00000 { compatible = "nvidia,tegra234-mc"; - reg = <0x02c00000 0x100000>, - <0x02b80000 0x040000>, - <0x01700000 0x100000>; + reg = <0x02c00000 0x10000>, /* MC-SID */ + <0x02c10000 0x10000>, /* MC Broadcast*/ + <0x02c20000 0x10000>, /* MC0 */ + <0x02c30000 0x10000>, /* MC1 */ + <0x02c40000 0x10000>, /* MC2 */ + <0x02c50000 0x10000>, /* MC3 */ + <0x02b80000 0x10000>, /* MC4 */ + <0x02b90000 0x10000>, /* MC5 */ + <0x02ba0000 0x10000>, /* MC6 */ + <0x02bb0000 0x10000>, /* MC7 */ + <0x01700000 0x10000>, /* MC8 */ + <0x01710000 0x10000>, /* MC9 */ + <0x01720000 0x10000>, /* MC10 */ + <0x01730000 0x10000>, /* MC11 */ + <0x01740000 0x10000>, /* MC12 */ + <0x01750000 0x10000>, /* MC13 */ + <0x01760000 0x10000>, /* MC14 */ + <0x01770000 0x10000>; /* MC15 */ + reg-names = "sid", "broadcast", "ch0", "ch1", "ch2", "ch3", + "ch4", "ch5", "ch6", "ch7", "ch8", "ch9", "ch10", + "ch11", "ch12", "ch13", "ch14", "ch15"; interrupts = <GIC_SPI 223 IRQ_TYPE_LEVEL_HIGH>; #interconnect-cells = <1>; status = "okay"; @@ -654,6 +680,20 @@ reset-names = "i2c"; }; + spi@3270000 { + compatible = "nvidia,tegra234-qspi"; + reg = <0x3270000 0x1000>; + interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + clocks = <&bpmp TEGRA234_CLK_QSPI0_2X_PM>, + <&bpmp TEGRA234_CLK_QSPI0_PM>; + clock-names = "qspi", "qspi_out"; + resets = <&bpmp TEGRA234_RESET_QSPI0>; + reset-names = "qspi"; + status = "disabled"; + }; + pwm1: pwm@3280000 { compatible = "nvidia,tegra194-pwm", "nvidia,tegra186-pwm"; @@ -666,6 +706,20 @@ #pwm-cells = <2>; }; + spi@3300000 { + compatible = "nvidia,tegra234-qspi"; + reg = <0x3300000 0x1000>; + interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + clocks = <&bpmp TEGRA234_CLK_QSPI1_2X_PM>, + <&bpmp TEGRA234_CLK_QSPI1_PM>; + clock-names = "qspi", "qspi_out"; + resets = <&bpmp TEGRA234_RESET_QSPI1>; + reset-names = "qspi"; + status = "disabled"; + }; + mmc@3460000 { compatible = "nvidia,tegra234-sdhci", "nvidia,tegra186-sdhci"; reg = <0x03460000 0x20000>; @@ -1258,6 +1312,13 @@ }; }; + ccplex@e000000 { + compatible = "nvidia,tegra234-ccplex-cluster"; + reg = <0x0 0x0e000000 0x0 0x5ffff>; + nvidia,bpmp = <&bpmp>; + status = "okay"; + }; + sram@40000000 { compatible = "nvidia,tegra234-sysram", "mmio-sram"; reg = <0x0 0x40000000 0x0 0x80000>; diff --git a/arch/arm64/boot/dts/qcom/Makefile b/arch/arm64/boot/dts/qcom/Makefile index f9e6343acd03..2f8aec2cc6db 100644 --- a/arch/arm64/boot/dts/qcom/Makefile +++ b/arch/arm64/boot/dts/qcom/Makefile @@ -83,11 +83,12 @@ dtb-$(CONFIG_ARCH_QCOM) += sc7180-trogdor-pompom-r3.dtb dtb-$(CONFIG_ARCH_QCOM) += sc7180-trogdor-pompom-r3-lte.dtb dtb-$(CONFIG_ARCH_QCOM) += sc7180-trogdor-r1.dtb dtb-$(CONFIG_ARCH_QCOM) += sc7180-trogdor-r1-lte.dtb -dtb-$(CONFIG_ARCH_QCOM) += sc7280-herobrine-herobrine-r0.dtb +dtb-$(CONFIG_ARCH_QCOM) += sc7280-herobrine-crd.dtb dtb-$(CONFIG_ARCH_QCOM) += sc7280-herobrine-herobrine-r1.dtb +dtb-$(CONFIG_ARCH_QCOM) += sc7280-herobrine-villager-r0.dtb dtb-$(CONFIG_ARCH_QCOM) += sc7280-idp.dtb dtb-$(CONFIG_ARCH_QCOM) += sc7280-idp2.dtb -dtb-$(CONFIG_ARCH_QCOM) += sc7280-crd.dtb +dtb-$(CONFIG_ARCH_QCOM) += sc7280-crd-r3.dtb dtb-$(CONFIG_ARCH_QCOM) += sdm630-sony-xperia-ganges-kirin.dtb dtb-$(CONFIG_ARCH_QCOM) += sdm630-sony-xperia-nile-discovery.dtb dtb-$(CONFIG_ARCH_QCOM) += sdm630-sony-xperia-nile-pioneer.dtb diff --git a/arch/arm64/boot/dts/qcom/apq8096-db820c.dts b/arch/arm64/boot/dts/qcom/apq8096-db820c.dts index f623db8451f1..56e54ce4d10e 100644 --- a/arch/arm64/boot/dts/qcom/apq8096-db820c.dts +++ b/arch/arm64/boot/dts/qcom/apq8096-db820c.dts @@ -258,6 +258,12 @@ vdd-gfx-supply = <&vdd_gfx>; }; +&mss_pil { + status = "okay"; + pll-supply = <&vreg_l12a_1p8>; + firmware-name = "qcom/apq8096/mba.mbn", "qcom/apq8096/modem.mbn"; +}; + &pm8994_resin { status = "okay"; linux,code = <KEY_VOLUMEDOWN>; diff --git a/arch/arm64/boot/dts/qcom/ipq6018-cp01-c1.dts b/arch/arm64/boot/dts/qcom/ipq6018-cp01-c1.dts index 5aec18308712..821cb7c0c183 100644 --- a/arch/arm64/boot/dts/qcom/ipq6018-cp01-c1.dts +++ b/arch/arm64/boot/dts/qcom/ipq6018-cp01-c1.dts @@ -39,7 +39,7 @@ cs-select = <0>; status = "okay"; - m25p80@0 { + flash@0 { #address-cells = <1>; #size-cells = <1>; reg = <0>; diff --git a/arch/arm64/boot/dts/qcom/ipq6018.dtsi b/arch/arm64/boot/dts/qcom/ipq6018.dtsi index aac56575e30d..a4d363c187fc 100644 --- a/arch/arm64/boot/dts/qcom/ipq6018.dtsi +++ b/arch/arm64/boot/dts/qcom/ipq6018.dtsi @@ -318,12 +318,12 @@ #size-cells = <0>; reg = <0x0 0x078b6000 0x0 0x600>; interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&gcc GCC_BLSP1_AHB_CLK>, - <&gcc GCC_BLSP1_QUP2_I2C_APPS_CLK>; - clock-names = "iface", "core"; + clocks = <&gcc GCC_BLSP1_QUP2_I2C_APPS_CLK>, + <&gcc GCC_BLSP1_AHB_CLK>; + clock-names = "core", "iface"; clock-frequency = <400000>; - dmas = <&blsp_dma 15>, <&blsp_dma 14>; - dma-names = "rx", "tx"; + dmas = <&blsp_dma 14>, <&blsp_dma 15>; + dma-names = "tx", "rx"; status = "disabled"; }; @@ -333,12 +333,12 @@ #size-cells = <0>; reg = <0x0 0x078b7000 0x0 0x600>; interrupts = <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&gcc GCC_BLSP1_AHB_CLK>, - <&gcc GCC_BLSP1_QUP3_I2C_APPS_CLK>; - clock-names = "iface", "core"; + clocks = <&gcc GCC_BLSP1_QUP3_I2C_APPS_CLK>, + <&gcc GCC_BLSP1_AHB_CLK>; + clock-names = "core", "iface"; clock-frequency = <400000>; - dmas = <&blsp_dma 17>, <&blsp_dma 16>; - dma-names = "rx", "tx"; + dmas = <&blsp_dma 16>, <&blsp_dma 17>; + dma-names = "tx", "rx"; status = "disabled"; }; @@ -630,6 +630,16 @@ }; }; + mdio: mdio@90000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "qcom,ipq6018-mdio", "qcom,ipq4019-mdio"; + reg = <0x0 0x90000 0x0 0x64>; + clocks = <&gcc GCC_MDIO_AHB_CLK>; + clock-names = "gcc_mdio_ahb_clk"; + status = "disabled"; + }; + qusb_phy_1: qusb@59000 { compatible = "qcom,ipq6018-qusb2-phy"; reg = <0x0 0x059000 0x0 0x180>; @@ -683,7 +693,6 @@ reg = <0x0 0x78000 0x0 0x1C4>; #address-cells = <2>; #size-cells = <2>; - #clock-cells = <1>; ranges; clocks = <&gcc GCC_USB0_AUX_CLK>, @@ -695,12 +704,13 @@ reset-names = "phy","common"; status = "disabled"; - usb0_ssphy: lane@78200 { + usb0_ssphy: phy@78200 { reg = <0x0 0x00078200 0x0 0x130>, /* Tx */ <0x0 0x00078400 0x0 0x200>, /* Rx */ <0x0 0x00078800 0x0 0x1F8>, /* PCS */ <0x0 0x00078600 0x0 0x044>; /* PCS misc */ #phy-cells = <0>; + #clock-cells = <1>; clocks = <&gcc GCC_USB0_PIPE_CLK>; clock-names = "pipe0"; clock-output-names = "gcc_usb0_pipe_clk_src"; diff --git a/arch/arm64/boot/dts/qcom/ipq8074-hk01.dts b/arch/arm64/boot/dts/qcom/ipq8074-hk01.dts index b5e1eaa367bf..de20cb98acd3 100644 --- a/arch/arm64/boot/dts/qcom/ipq8074-hk01.dts +++ b/arch/arm64/boot/dts/qcom/ipq8074-hk01.dts @@ -35,7 +35,7 @@ &blsp1_spi1 { status = "okay"; - m25p80@0 { + flash@0 { #address-cells = <1>; #size-cells = <1>; compatible = "jedec,spi-nor"; diff --git a/arch/arm64/boot/dts/qcom/ipq8074-hk10.dtsi b/arch/arm64/boot/dts/qcom/ipq8074-hk10.dtsi index 07e670829676..ce86d9b10d69 100644 --- a/arch/arm64/boot/dts/qcom/ipq8074-hk10.dtsi +++ b/arch/arm64/boot/dts/qcom/ipq8074-hk10.dtsi @@ -29,7 +29,7 @@ &blsp1_spi1 { status = "ok"; - m25p80@0 { + flash@0 { #address-cells = <1>; #size-cells = <1>; compatible = "jedec,spi-nor"; diff --git a/arch/arm64/boot/dts/qcom/ipq8074.dtsi b/arch/arm64/boot/dts/qcom/ipq8074.dtsi index d80b1cefab10..943243d5515b 100644 --- a/arch/arm64/boot/dts/qcom/ipq8074.dtsi +++ b/arch/arm64/boot/dts/qcom/ipq8074.dtsi @@ -13,7 +13,7 @@ clocks { sleep_clk: sleep_clk { compatible = "fixed-clock"; - clock-frequency = <32000>; + clock-frequency = <32768>; #clock-cells = <0>; }; @@ -467,12 +467,12 @@ #size-cells = <0>; reg = <0x078b6000 0x600>; interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&gcc GCC_BLSP1_AHB_CLK>, - <&gcc GCC_BLSP1_QUP2_I2C_APPS_CLK>; - clock-names = "iface", "core"; + clocks = <&gcc GCC_BLSP1_QUP2_I2C_APPS_CLK>, + <&gcc GCC_BLSP1_AHB_CLK>; + clock-names = "core", "iface"; clock-frequency = <400000>; - dmas = <&blsp_dma 15>, <&blsp_dma 14>; - dma-names = "rx", "tx"; + dmas = <&blsp_dma 14>, <&blsp_dma 15>; + dma-names = "tx", "rx"; pinctrl-0 = <&i2c_0_pins>; pinctrl-names = "default"; status = "disabled"; @@ -484,12 +484,12 @@ #size-cells = <0>; reg = <0x078b7000 0x600>; interrupts = <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&gcc GCC_BLSP1_AHB_CLK>, - <&gcc GCC_BLSP1_QUP3_I2C_APPS_CLK>; - clock-names = "iface", "core"; + clocks = <&gcc GCC_BLSP1_QUP3_I2C_APPS_CLK>, + <&gcc GCC_BLSP1_AHB_CLK>; + clock-names = "core", "iface"; clock-frequency = <100000>; - dmas = <&blsp_dma 17>, <&blsp_dma 16>; - dma-names = "rx", "tx"; + dmas = <&blsp_dma 16>, <&blsp_dma 17>; + dma-names = "tx", "rx"; status = "disabled"; }; @@ -499,12 +499,12 @@ #size-cells = <0>; reg = <0x78b9000 0x600>; interrupts = <GIC_SPI 299 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&gcc GCC_BLSP1_AHB_CLK>, - <&gcc GCC_BLSP1_QUP5_I2C_APPS_CLK>; - clock-names = "iface", "core"; + clocks = <&gcc GCC_BLSP1_QUP5_I2C_APPS_CLK>, + <&gcc GCC_BLSP1_AHB_CLK>; + clock-names = "core", "iface"; clock-frequency = <400000>; - dmas = <&blsp_dma 21>, <&blsp_dma 20>; - dma-names = "rx", "tx"; + dmas = <&blsp_dma 20>, <&blsp_dma 21>; + dma-names = "tx", "rx"; status = "disabled"; }; @@ -514,12 +514,12 @@ #size-cells = <0>; reg = <0x078ba000 0x600>; interrupts = <GIC_SPI 300 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&gcc GCC_BLSP1_AHB_CLK>, - <&gcc GCC_BLSP1_QUP6_I2C_APPS_CLK>; - clock-names = "iface", "core"; + clocks = <&gcc GCC_BLSP1_QUP6_I2C_APPS_CLK>, + <&gcc GCC_BLSP1_AHB_CLK>; + clock-names = "core", "iface"; clock-frequency = <100000>; - dmas = <&blsp_dma 23>, <&blsp_dma 22>; - dma-names = "rx", "tx"; + dmas = <&blsp_dma 22>, <&blsp_dma 23>; + dma-names = "tx", "rx"; status = "disabled"; }; diff --git a/arch/arm64/boot/dts/qcom/msm8916-huawei-g7.dts b/arch/arm64/boot/dts/qcom/msm8916-huawei-g7.dts index 42d93d3fba36..00488afb413d 100644 --- a/arch/arm64/boot/dts/qcom/msm8916-huawei-g7.dts +++ b/arch/arm64/boot/dts/qcom/msm8916-huawei-g7.dts @@ -8,18 +8,14 @@ #include <dt-bindings/input/input.h> #include <dt-bindings/interrupt-controller/irq.h> #include <dt-bindings/leds/common.h> +#include <dt-bindings/sound/apq8016-lpass.h> /* * Note: The original firmware from Huawei can only boot 32-bit kernels. - * To boot arm64 kernels it is necessary to flash 64-bit TZ/HYP firmware - * with EDL, e.g. taken from the DragonBoard 410c. This works because Huawei - * forgot to set up (firmware) secure boot for some reason. - * - * Also note that Huawei no longer provides bootloader unlock codes. - * This can be bypassed by patching the bootloader from a custom HYP firmware, - * making it think the bootloader is unlocked. - * - * See: https://wiki.postmarketos.org/wiki/Huawei_Ascend_G7_(huawei-g7) + * To boot this device tree using arm64 it is necessary to flash 64-bit TZ/HYP + * firmware (e.g. taken from the DragonBoard 410c). + * See https://wiki.postmarketos.org/wiki/Huawei_Ascend_G7_(huawei-g7) + * for suggested installation instructions. */ / { @@ -216,6 +212,10 @@ status = "okay"; }; +&lpass { + status = "okay"; +}; + &pm8916_resin { status = "okay"; linux,code = <KEY_VOLUMEDOWN>; @@ -260,6 +260,40 @@ cd-gpios = <&msmgpio 56 GPIO_ACTIVE_LOW>; }; +&sound { + status = "okay"; + + model = "msm8916"; + audio-routing = + "AMIC1", "MIC BIAS External1", + "AMIC2", "MIC BIAS External2", + "AMIC3", "MIC BIAS External1"; + + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&cdc_pdm_lines_act>; + pinctrl-1 = <&cdc_pdm_lines_sus>; + + primary-dai-link { + link-name = "WCD"; + cpu { + sound-dai = <&lpass MI2S_PRIMARY>; + }; + codec { + sound-dai = <&lpass_codec 0>, <&wcd_codec 0>; + }; + }; + + tertiary-dai-link { + link-name = "WCD-Capture"; + cpu { + sound-dai = <&lpass MI2S_TERTIARY>; + }; + codec { + sound-dai = <&lpass_codec 1>, <&wcd_codec 1>; + }; + }; +}; + &usb { status = "okay"; extcon = <&usb_id>, <&usb_id>; @@ -269,6 +303,13 @@ extcon = <&usb_id>; }; +&wcd_codec { + qcom,micbias-lvl = <2800>; + qcom,mbhc-vthreshold-low = <75 150 237 450 500>; + qcom,mbhc-vthreshold-high = <75 150 237 450 500>; + qcom,hphl-jack-type-normally-open; +}; + &smd_rpm_regulators { vdd_l1_l2_l3-supply = <&pm8916_s3>; vdd_l4_l5_l6-supply = <&pm8916_s4>; diff --git a/arch/arm64/boot/dts/qcom/msm8916.dtsi b/arch/arm64/boot/dts/qcom/msm8916.dtsi index e34963505e07..05472510e29d 100644 --- a/arch/arm64/boot/dts/qcom/msm8916.dtsi +++ b/arch/arm64/boot/dts/qcom/msm8916.dtsi @@ -299,7 +299,7 @@ qcom,smd-channels = "rpm_requests"; rpmcc: clock-controller { - compatible = "qcom,rpmcc-msm8916"; + compatible = "qcom,rpmcc-msm8916", "qcom,rpmcc"; #clock-cells = <1>; }; @@ -1314,6 +1314,20 @@ #interrupt-cells = <4>; }; + bam_dmux_dma: dma-controller@4044000 { + compatible = "qcom,bam-v1.7.0"; + reg = <0x04044000 0x19000>; + interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>; + #dma-cells = <1>; + qcom,ee = <0>; + + num-channels = <6>; + qcom,num-ees = <1>; + qcom,powered-remotely; + + status = "disabled"; + }; + mpss: remoteproc@4080000 { compatible = "qcom,msm8916-mss-pil", "qcom,q6v5-pil"; reg = <0x04080000 0x100>, @@ -1357,6 +1371,22 @@ memory-region = <&mpss_mem>; }; + bam_dmux: bam-dmux { + compatible = "qcom,bam-dmux"; + + interrupt-parent = <&hexagon_smsm>; + interrupts = <1 IRQ_TYPE_EDGE_BOTH>, <11 IRQ_TYPE_EDGE_BOTH>; + interrupt-names = "pc", "pc-ack"; + + qcom,smem-states = <&apps_smsm 1>, <&apps_smsm 11>; + qcom,smem-state-names = "pc", "pc-ack"; + + dmas = <&bam_dmux_dma 4>, <&bam_dmux_dma 5>; + dma-names = "tx", "rx"; + + status = "disabled"; + }; + smd-edge { interrupts = <GIC_SPI 25 IRQ_TYPE_EDGE_RISING>; @@ -1485,8 +1515,8 @@ interrupts = <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>; clocks = <&gcc GCC_BLSP1_UART1_APPS_CLK>, <&gcc GCC_BLSP1_AHB_CLK>; clock-names = "core", "iface"; - dmas = <&blsp_dma 1>, <&blsp_dma 0>; - dma-names = "rx", "tx"; + dmas = <&blsp_dma 0>, <&blsp_dma 1>; + dma-names = "tx", "rx"; pinctrl-names = "default", "sleep"; pinctrl-0 = <&blsp1_uart1_default>; pinctrl-1 = <&blsp1_uart1_sleep>; @@ -1499,8 +1529,8 @@ interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>; clocks = <&gcc GCC_BLSP1_UART2_APPS_CLK>, <&gcc GCC_BLSP1_AHB_CLK>; clock-names = "core", "iface"; - dmas = <&blsp_dma 3>, <&blsp_dma 2>; - dma-names = "rx", "tx"; + dmas = <&blsp_dma 2>, <&blsp_dma 3>; + dma-names = "tx", "rx"; pinctrl-names = "default", "sleep"; pinctrl-0 = <&blsp1_uart2_default>; pinctrl-1 = <&blsp1_uart2_sleep>; @@ -1511,9 +1541,9 @@ compatible = "qcom,i2c-qup-v2.2.1"; reg = <0x078b5000 0x500>; interrupts = <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&gcc GCC_BLSP1_AHB_CLK>, - <&gcc GCC_BLSP1_QUP1_I2C_APPS_CLK>; - clock-names = "iface", "core"; + clocks = <&gcc GCC_BLSP1_QUP1_I2C_APPS_CLK>, + <&gcc GCC_BLSP1_AHB_CLK>; + clock-names = "core", "iface"; pinctrl-names = "default", "sleep"; pinctrl-0 = <&i2c1_default>; pinctrl-1 = <&i2c1_sleep>; @@ -1529,8 +1559,8 @@ clocks = <&gcc GCC_BLSP1_QUP1_SPI_APPS_CLK>, <&gcc GCC_BLSP1_AHB_CLK>; clock-names = "core", "iface"; - dmas = <&blsp_dma 5>, <&blsp_dma 4>; - dma-names = "rx", "tx"; + dmas = <&blsp_dma 4>, <&blsp_dma 5>; + dma-names = "tx", "rx"; pinctrl-names = "default", "sleep"; pinctrl-0 = <&spi1_default>; pinctrl-1 = <&spi1_sleep>; @@ -1543,9 +1573,9 @@ compatible = "qcom,i2c-qup-v2.2.1"; reg = <0x078b6000 0x500>; interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&gcc GCC_BLSP1_AHB_CLK>, - <&gcc GCC_BLSP1_QUP2_I2C_APPS_CLK>; - clock-names = "iface", "core"; + clocks = <&gcc GCC_BLSP1_QUP2_I2C_APPS_CLK>, + <&gcc GCC_BLSP1_AHB_CLK>; + clock-names = "core", "iface"; pinctrl-names = "default", "sleep"; pinctrl-0 = <&i2c2_default>; pinctrl-1 = <&i2c2_sleep>; @@ -1561,8 +1591,8 @@ clocks = <&gcc GCC_BLSP1_QUP2_SPI_APPS_CLK>, <&gcc GCC_BLSP1_AHB_CLK>; clock-names = "core", "iface"; - dmas = <&blsp_dma 7>, <&blsp_dma 6>; - dma-names = "rx", "tx"; + dmas = <&blsp_dma 6>, <&blsp_dma 7>; + dma-names = "tx", "rx"; pinctrl-names = "default", "sleep"; pinctrl-0 = <&spi2_default>; pinctrl-1 = <&spi2_sleep>; @@ -1575,9 +1605,9 @@ compatible = "qcom,i2c-qup-v2.2.1"; reg = <0x078b7000 0x500>; interrupts = <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&gcc GCC_BLSP1_AHB_CLK>, - <&gcc GCC_BLSP1_QUP3_I2C_APPS_CLK>; - clock-names = "iface", "core"; + clocks = <&gcc GCC_BLSP1_QUP3_I2C_APPS_CLK>, + <&gcc GCC_BLSP1_AHB_CLK>; + clock-names = "core", "iface"; pinctrl-names = "default", "sleep"; pinctrl-0 = <&i2c3_default>; pinctrl-1 = <&i2c3_sleep>; @@ -1593,8 +1623,8 @@ clocks = <&gcc GCC_BLSP1_QUP3_SPI_APPS_CLK>, <&gcc GCC_BLSP1_AHB_CLK>; clock-names = "core", "iface"; - dmas = <&blsp_dma 9>, <&blsp_dma 8>; - dma-names = "rx", "tx"; + dmas = <&blsp_dma 8>, <&blsp_dma 9>; + dma-names = "tx", "rx"; pinctrl-names = "default", "sleep"; pinctrl-0 = <&spi3_default>; pinctrl-1 = <&spi3_sleep>; @@ -1607,9 +1637,9 @@ compatible = "qcom,i2c-qup-v2.2.1"; reg = <0x078b8000 0x500>; interrupts = <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&gcc GCC_BLSP1_AHB_CLK>, - <&gcc GCC_BLSP1_QUP4_I2C_APPS_CLK>; - clock-names = "iface", "core"; + clocks = <&gcc GCC_BLSP1_QUP4_I2C_APPS_CLK>, + <&gcc GCC_BLSP1_AHB_CLK>; + clock-names = "core", "iface"; pinctrl-names = "default", "sleep"; pinctrl-0 = <&i2c4_default>; pinctrl-1 = <&i2c4_sleep>; @@ -1625,8 +1655,8 @@ clocks = <&gcc GCC_BLSP1_QUP4_SPI_APPS_CLK>, <&gcc GCC_BLSP1_AHB_CLK>; clock-names = "core", "iface"; - dmas = <&blsp_dma 11>, <&blsp_dma 10>; - dma-names = "rx", "tx"; + dmas = <&blsp_dma 10>, <&blsp_dma 11>; + dma-names = "tx", "rx"; pinctrl-names = "default", "sleep"; pinctrl-0 = <&spi4_default>; pinctrl-1 = <&spi4_sleep>; @@ -1639,9 +1669,9 @@ compatible = "qcom,i2c-qup-v2.2.1"; reg = <0x078b9000 0x500>; interrupts = <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&gcc GCC_BLSP1_AHB_CLK>, - <&gcc GCC_BLSP1_QUP5_I2C_APPS_CLK>; - clock-names = "iface", "core"; + clocks = <&gcc GCC_BLSP1_QUP5_I2C_APPS_CLK>, + <&gcc GCC_BLSP1_AHB_CLK>; + clock-names = "core", "iface"; pinctrl-names = "default", "sleep"; pinctrl-0 = <&i2c5_default>; pinctrl-1 = <&i2c5_sleep>; @@ -1657,8 +1687,8 @@ clocks = <&gcc GCC_BLSP1_QUP5_SPI_APPS_CLK>, <&gcc GCC_BLSP1_AHB_CLK>; clock-names = "core", "iface"; - dmas = <&blsp_dma 13>, <&blsp_dma 12>; - dma-names = "rx", "tx"; + dmas = <&blsp_dma 12>, <&blsp_dma 13>; + dma-names = "tx", "rx"; pinctrl-names = "default", "sleep"; pinctrl-0 = <&spi5_default>; pinctrl-1 = <&spi5_sleep>; @@ -1671,9 +1701,9 @@ compatible = "qcom,i2c-qup-v2.2.1"; reg = <0x078ba000 0x500>; interrupts = <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&gcc GCC_BLSP1_AHB_CLK>, - <&gcc GCC_BLSP1_QUP6_I2C_APPS_CLK>; - clock-names = "iface", "core"; + clocks = <&gcc GCC_BLSP1_QUP6_I2C_APPS_CLK>, + <&gcc GCC_BLSP1_AHB_CLK>; + clock-names = "core", "iface"; pinctrl-names = "default", "sleep"; pinctrl-0 = <&i2c6_default>; pinctrl-1 = <&i2c6_sleep>; @@ -1689,8 +1719,8 @@ clocks = <&gcc GCC_BLSP1_QUP6_SPI_APPS_CLK>, <&gcc GCC_BLSP1_AHB_CLK>; clock-names = "core", "iface"; - dmas = <&blsp_dma 15>, <&blsp_dma 14>; - dma-names = "rx", "tx"; + dmas = <&blsp_dma 14>, <&blsp_dma 15>; + dma-names = "tx", "rx"; pinctrl-names = "default", "sleep"; pinctrl-0 = <&spi6_default>; pinctrl-1 = <&spi6_sleep>; @@ -1788,7 +1818,7 @@ qcom,mmio = <&pronto>; - bt { + bluetooth { compatible = "qcom,wcnss-bt"; }; diff --git a/arch/arm64/boot/dts/qcom/msm8953.dtsi b/arch/arm64/boot/dts/qcom/msm8953.dtsi index 431228faacdd..49903a6e9dfd 100644 --- a/arch/arm64/boot/dts/qcom/msm8953.dtsi +++ b/arch/arm64/boot/dts/qcom/msm8953.dtsi @@ -321,12 +321,12 @@ qcom,ipc = <&apcs 8 0>; qcom,smd-edge = <15>; - rpm_requests: rpm_requests { + rpm_requests: rpm-requests { compatible = "qcom,rpm-msm8953"; qcom,smd-channels = "rpm_requests"; rpmcc: rpmcc { - compatible = "qcom,rpmcc-msm8953"; + compatible = "qcom,rpmcc-msm8953", "qcom,rpmcc"; clocks = <&xo_board>; clock-names = "xo"; #clock-cells = <1>; @@ -923,9 +923,9 @@ compatible = "qcom,i2c-qup-v2.2.1"; reg = <0x78b5000 0x600>; interrupts = <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>; - clock-names = "iface", "core"; - clocks = <&gcc GCC_BLSP1_AHB_CLK>, - <&gcc GCC_BLSP1_QUP1_I2C_APPS_CLK>; + clock-names = "core", "iface"; + clocks = <&gcc GCC_BLSP1_QUP1_I2C_APPS_CLK>, + <&gcc GCC_BLSP1_AHB_CLK>; pinctrl-names = "default", "sleep"; pinctrl-0 = <&i2c_1_default>; @@ -941,9 +941,9 @@ compatible = "qcom,i2c-qup-v2.2.1"; reg = <0x78b6000 0x600>; interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>; - clock-names = "iface", "core"; - clocks = <&gcc GCC_BLSP1_AHB_CLK>, - <&gcc GCC_BLSP1_QUP2_I2C_APPS_CLK>; + clock-names = "core", "iface"; + clocks = <&gcc GCC_BLSP1_QUP2_I2C_APPS_CLK>, + <&gcc GCC_BLSP1_AHB_CLK>; pinctrl-names = "default", "sleep"; pinctrl-0 = <&i2c_2_default>; @@ -959,9 +959,9 @@ compatible = "qcom,i2c-qup-v2.2.1"; reg = <0x78b7000 0x600>; interrupts = <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>; - clock-names = "iface", "core"; - clocks = <&gcc GCC_BLSP1_AHB_CLK>, - <&gcc GCC_BLSP1_QUP3_I2C_APPS_CLK>; + clock-names = "core", "iface"; + clocks = <&gcc GCC_BLSP1_QUP3_I2C_APPS_CLK>, + <&gcc GCC_BLSP1_AHB_CLK>; pinctrl-names = "default", "sleep"; pinctrl-0 = <&i2c_3_default>; pinctrl-1 = <&i2c_3_sleep>; @@ -976,9 +976,9 @@ compatible = "qcom,i2c-qup-v2.2.1"; reg = <0x78b8000 0x600>; interrupts = <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>; - clock-names = "iface", "core"; - clocks = <&gcc GCC_BLSP1_AHB_CLK>, - <&gcc GCC_BLSP1_QUP4_I2C_APPS_CLK>; + clock-names = "core", "iface"; + clocks = <&gcc GCC_BLSP1_QUP4_I2C_APPS_CLK>, + <&gcc GCC_BLSP1_AHB_CLK>; pinctrl-names = "default", "sleep"; pinctrl-0 = <&i2c_4_default>; pinctrl-1 = <&i2c_4_sleep>; @@ -993,9 +993,9 @@ compatible = "qcom,i2c-qup-v2.2.1"; reg = <0x7af5000 0x600>; interrupts = <GIC_SPI 299 IRQ_TYPE_LEVEL_HIGH>; - clock-names = "iface", "core"; - clocks = <&gcc GCC_BLSP2_AHB_CLK>, - <&gcc GCC_BLSP2_QUP1_I2C_APPS_CLK>; + clock-names = "core", "iface"; + clocks = <&gcc GCC_BLSP2_QUP1_I2C_APPS_CLK>, + <&gcc GCC_BLSP2_AHB_CLK>; pinctrl-names = "default", "sleep"; pinctrl-0 = <&i2c_5_default>; pinctrl-1 = <&i2c_5_sleep>; @@ -1010,9 +1010,9 @@ compatible = "qcom,i2c-qup-v2.2.1"; reg = <0x7af6000 0x600>; interrupts = <GIC_SPI 300 IRQ_TYPE_LEVEL_HIGH>; - clock-names = "iface", "core"; - clocks = <&gcc GCC_BLSP2_AHB_CLK>, - <&gcc GCC_BLSP2_QUP2_I2C_APPS_CLK>; + clock-names = "core", "iface"; + clocks = <&gcc GCC_BLSP2_QUP2_I2C_APPS_CLK>, + <&gcc GCC_BLSP2_AHB_CLK>; pinctrl-names = "default", "sleep"; pinctrl-0 = <&i2c_6_default>; pinctrl-1 = <&i2c_6_sleep>; @@ -1027,9 +1027,9 @@ compatible = "qcom,i2c-qup-v2.2.1"; reg = <0x7af7000 0x600>; interrupts = <GIC_SPI 301 IRQ_TYPE_LEVEL_HIGH>; - clock-names = "iface", "core"; - clocks = <&gcc GCC_BLSP2_AHB_CLK>, - <&gcc GCC_BLSP2_QUP3_I2C_APPS_CLK>; + clock-names = "core", "iface"; + clocks = <&gcc GCC_BLSP2_QUP3_I2C_APPS_CLK>, + <&gcc GCC_BLSP2_AHB_CLK>; pinctrl-names = "default", "sleep"; pinctrl-0 = <&i2c_7_default>; pinctrl-1 = <&i2c_7_sleep>; @@ -1044,9 +1044,9 @@ compatible = "qcom,i2c-qup-v2.2.1"; reg = <0x7af8000 0x600>; interrupts = <GIC_SPI 302 IRQ_TYPE_LEVEL_HIGH>; - clock-names = "iface", "core"; - clocks = <&gcc GCC_BLSP2_AHB_CLK>, - <&gcc GCC_BLSP2_QUP4_I2C_APPS_CLK>; + clock-names = "core", "iface"; + clocks = <&gcc GCC_BLSP2_QUP4_I2C_APPS_CLK>, + <&gcc GCC_BLSP2_AHB_CLK>; pinctrl-names = "default", "sleep"; pinctrl-0 = <&i2c_8_default>; pinctrl-1 = <&i2c_8_sleep>; diff --git a/arch/arm64/boot/dts/qcom/msm8992-xiaomi-libra.dts b/arch/arm64/boot/dts/qcom/msm8992-xiaomi-libra.dts index 84558ab5fe86..7748b745a5df 100644 --- a/arch/arm64/boot/dts/qcom/msm8992-xiaomi-libra.dts +++ b/arch/arm64/boot/dts/qcom/msm8992-xiaomi-libra.dts @@ -23,20 +23,31 @@ /* This enables graphical output via bootloader-enabled display */ chosen { - bootargs = "earlycon=tty0 console=tty0"; + bootargs = "earlycon=tty0 console=tty0 maxcpus=1"; #address-cells = <2>; #size-cells = <2>; ranges; - framebuffer0: framebuffer@3404000 { - status= "okay"; + framebuffer0: framebuffer@3400000 { compatible = "simple-framebuffer"; - reg = <0 0x3404000 0 (1080 * 1920 * 3)>; + reg = <0 0x3400000 0 (1080 * 1920 * 3)>; width = <1080>; height = <1920>; stride = <(1080 * 3)>; format = "r8g8b8"; + /* + * That's a lot of clocks, but it's necessary due + * to unused clk cleanup & no panel driver yet.. + */ + clocks = <&mmcc MDSS_AHB_CLK>, + <&mmcc MDSS_AXI_CLK>, + <&mmcc MDSS_VSYNC_CLK>, + <&mmcc MDSS_MDP_CLK>, + <&mmcc MDSS_BYTE0_CLK>, + <&mmcc MDSS_PCLK0_CLK>, + <&mmcc MDSS_ESC0_CLK>; + power-domains = <&mmcc MDSS_GDSC>; }; }; @@ -126,6 +137,23 @@ no-map; }; +&pm8994_spmi_regulators { + VDD_APC0: s8 { + regulator-min-microvolt = <680000>; + regulator-max-microvolt = <1180000>; + regulator-always-on; + regulator-boot-on; + }; + + /* APC1 is 3-phase, but quoting downstream, s11 is "the gang leader" */ + VDD_APC1: s11 { + regulator-min-microvolt = <700000>; + regulator-max-microvolt = <1225000>; + regulator-always-on; + regulator-boot-on; + }; +}; + &rpm_requests { pm8994-regulators { compatible = "qcom,rpm-pm8994-regulators"; diff --git a/arch/arm64/boot/dts/qcom/msm8992.dtsi b/arch/arm64/boot/dts/qcom/msm8992.dtsi index 58fe58cc7703..750643763a76 100644 --- a/arch/arm64/boot/dts/qcom/msm8992.dtsi +++ b/arch/arm64/boot/dts/qcom/msm8992.dtsi @@ -10,8 +10,30 @@ /delete-node/ &cpu6_map; /delete-node/ &cpu7_map; +&gcc { + compatible = "qcom,gcc-msm8992"; +}; + +&mmcc { + compatible = "qcom,mmcc-msm8992"; + + assigned-clock-rates = <800000000>, + <808000000>, + <1020000000>, + <960000000>, + <800000000>; +}; + +&ocmem { + reg = <0xfdd00000 0x2000>, <0xfec00000 0x100000>; + + gmu-sram@0 { + reg = <0x0 0x80000>; + }; +}; + &rpmcc { - compatible = "qcom,rpmcc-msm8992"; + compatible = "qcom,rpmcc-msm8992", "qcom,rpmcc"; }; &tcsr_mutex { diff --git a/arch/arm64/boot/dts/qcom/msm8994-huawei-angler-rev-101.dts b/arch/arm64/boot/dts/qcom/msm8994-huawei-angler-rev-101.dts index 0e3dd48f0dbf..dbfbb77e9ff5 100644 --- a/arch/arm64/boot/dts/qcom/msm8994-huawei-angler-rev-101.dts +++ b/arch/arm64/boot/dts/qcom/msm8994-huawei-angler-rev-101.dts @@ -1,7 +1,7 @@ // SPDX-License-Identifier: GPL-2.0-only /* Copyright (c) 2015, Huawei Inc. All rights reserved. * Copyright (c) 2016, The Linux Foundation. All rights reserved. - * Copyright (c) 2021, Petr Vorel <petr.vorel@gmail.com> + * Copyright (c) 2021-2022, Petr Vorel <petr.vorel@gmail.com> */ /dts-v1/; @@ -27,17 +27,20 @@ chosen { stdout-path = "serial0:115200n8"; }; +}; - soc { - serial@f991e000 { - status = "okay"; - pinctrl-names = "default", "sleep"; - pinctrl-0 = <&blsp1_uart2_default>; - pinctrl-1 = <&blsp1_uart2_sleep>; - }; - }; +&blsp1_uart2 { + status = "okay"; + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&blsp1_uart2_default>; + pinctrl-1 = <&blsp1_uart2_sleep>; }; &tlmm { gpio-reserved-ranges = <85 4>; }; + +&sdhc1 { + status = "okay"; + mmc-hs400-1_8v; +}; diff --git a/arch/arm64/boot/dts/qcom/msm8994-sony-xperia-kitakami.dtsi b/arch/arm64/boot/dts/qcom/msm8994-sony-xperia-kitakami.dtsi index dde7ed159c4d..e5a45af0bd12 100644 --- a/arch/arm64/boot/dts/qcom/msm8994-sony-xperia-kitakami.dtsi +++ b/arch/arm64/boot/dts/qcom/msm8994-sony-xperia-kitakami.dtsi @@ -108,13 +108,6 @@ /* NXP PN547 NFC */ }; -&blsp1_i2c4 { - status = "okay"; - clock-frequency = <355000>; - - /* Empty but active */ -}; - &blsp1_i2c6 { status = "okay"; clock-frequency = <355000>; @@ -194,26 +187,38 @@ }; &rpm_requests { + /* PMI8994 should probe first, because pmi8994_bby supplies some of PM8994's regulators */ + pmi8994_regulators: pmi8994-regulators { + compatible = "qcom,rpm-pmi8994-regulators"; + + vdd_s1-supply = <&vph_pwr>; + vdd_bst_byp-supply = <&vph_pwr>; + + pmi8994_s1: s1 { + regulator-min-microvolt = <1025000>; + regulator-max-microvolt = <1025000>; + }; + + /* S2 & S3 - VDD_GFX */ + + pmi8994_bby: boost-bypass { + regulator-min-microvolt = <3150000>; + regulator-max-microvolt = <3600000>; + }; + }; + pm8994_regulators: pm8994-regulators { compatible = "qcom,rpm-pm8994-regulators"; - vdd_s1-supply = <&vph_pwr>; - vdd_s2-supply = <&vph_pwr>; vdd_s3-supply = <&vph_pwr>; vdd_s4-supply = <&vph_pwr>; vdd_s5-supply = <&vph_pwr>; vdd_s6-supply = <&vph_pwr>; vdd_s7-supply = <&vph_pwr>; - vdd_s8-supply = <&vph_pwr>; - vdd_s9-supply = <&vph_pwr>; - vdd_s10-supply = <&vph_pwr>; - vdd_s11-supply = <&vph_pwr>; - vdd_s12-supply = <&vph_pwr>; vdd_l1-supply = <&pmi8994_s1>; vdd_l2_l26_l28-supply = <&pm8994_s3>; vdd_l3_l11-supply = <&pm8994_s3>; vdd_l4_l27_l31-supply = <&pm8994_s3>; - vdd_l5_l7-supply = <&pm8994_s5>; vdd_l6_l12_l32-supply = <&pm8994_s5>; vdd_l8_l16_l30-supply = <&vph_pwr>; vdd_l9_l10_l18_l22-supply = <&pmi8994_bby>; @@ -234,9 +239,9 @@ pm8994_s4: s4 { regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; + regulator-system-load = <325000>; regulator-allow-set-load; regulator-always-on; - regulator-system-load = <325000>; }; pm8994_s5: s5 { @@ -262,13 +267,14 @@ pm8994_l2: l2 { regulator-min-microvolt = <1250000>; regulator-max-microvolt = <1250000>; - regulator-allow-set-load; regulator-system-load = <10000>; + regulator-allow-set-load; }; pm8994_l3: l3 { regulator-min-microvolt = <1100000>; regulator-max-microvolt = <1100000>; + regulator-boot-on; }; pm8994_l4: l4 { @@ -308,8 +314,8 @@ pm8994_l12: l12 { regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; - regulator-allow-set-load; regulator-system-load = <10000>; + regulator-allow-set-load; }; pm8994_l13: l13 { @@ -320,8 +326,9 @@ pm8994_l14: l14 { regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; - regulator-allow-set-load; regulator-system-load = <10000>; + regulator-allow-set-load; + regulator-boot-on; }; pm8994_l15: l15 { @@ -337,44 +344,47 @@ pm8994_l17: l17 { regulator-min-microvolt = <2200000>; regulator-max-microvolt = <2200000>; + regulator-boot-on; }; pm8994_l18: l18 { regulator-min-microvolt = <2850000>; regulator-max-microvolt = <2850000>; regulator-always-on; + regulator-boot-on; }; pm8994_l19: l19 { regulator-min-microvolt = <2850000>; regulator-max-microvolt = <2850000>; + regulator-boot-on; }; pm8994_l20: l20 { regulator-min-microvolt = <2950000>; regulator-max-microvolt = <2950000>; - regulator-always-on; - regulator-boot-on; - regulator-allow-set-load; regulator-system-load = <570000>; + regulator-allow-set-load; }; pm8994_l21: l21 { regulator-min-microvolt = <2950000>; regulator-max-microvolt = <2950000>; - regulator-always-on; - regulator-allow-set-load; regulator-system-load = <800000>; + regulator-allow-set-load; }; pm8994_l22: l22 { regulator-min-microvolt = <3000000>; regulator-max-microvolt = <3000000>; + regulator-boot-on; }; pm8994_l23: l23 { regulator-min-microvolt = <2800000>; regulator-max-microvolt = <2800000>; + regulator-always-on; + regulator-boot-on; }; pm8994_l24: l24 { @@ -385,6 +395,7 @@ pm8994_l25: l25 { regulator-min-microvolt = <1000000>; regulator-max-microvolt = <1000000>; + regulator-boot-on; }; pm8994_l26: l26 { @@ -395,30 +406,33 @@ pm8994_l27: l27 { regulator-min-microvolt = <1200000>; regulator-max-microvolt = <1200000>; + regulator-boot-on; }; pm8994_l28: l28 { regulator-min-microvolt = <1000000>; regulator-max-microvolt = <1000000>; - regulator-allow-set-load; regulator-system-load = <10000>; + regulator-allow-set-load; }; pm8994_l29: l29 { regulator-min-microvolt = <2700000>; regulator-max-microvolt = <2700000>; + regulator-boot-on; }; pm8994_l30: l30 { regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; + regulator-boot-on; }; pm8994_l31: l31 { regulator-min-microvolt = <1200000>; regulator-max-microvolt = <1200000>; - regulator-allow-set-load; regulator-system-load = <10000>; + regulator-allow-set-load; }; pm8994_l32: l32 { @@ -426,26 +440,11 @@ regulator-max-microvolt = <1800000>; }; - pm8994_lvs1: lvs1 {}; - pm8994_lvs2: lvs2 {}; - }; - - pmi8994_regulators: pmi8994-regulators { - compatible = "qcom,rpm-pmi8994-regulators"; - - vdd_s1-supply = <&vph_pwr>; - vdd_bst_byp-supply = <&vph_pwr>; - - pmi8994_s1: s1 { - regulator-min-microvolt = <1025000>; - regulator-max-microvolt = <1025000>; + pm8994_lvs1: lvs1 { + regulator-boot-on; }; - - /* S2 & S3 - VDD_GFX */ - - pmi8994_bby: boost-bypass { - regulator-min-microvolt = <3150000>; - regulator-max-microvolt = <3600000>; + pm8994_lvs2: lvs2 { + regulator-boot-on; }; }; }; diff --git a/arch/arm64/boot/dts/qcom/msm8994.dtsi b/arch/arm64/boot/dts/qcom/msm8994.dtsi index 8c1dc5155b71..367ed913902c 100644 --- a/arch/arm64/boot/dts/qcom/msm8994.dtsi +++ b/arch/arm64/boot/dts/qcom/msm8994.dtsi @@ -4,6 +4,8 @@ #include <dt-bindings/interrupt-controller/arm-gic.h> #include <dt-bindings/clock/qcom,gcc-msm8994.h> +#include <dt-bindings/clock/qcom,mmcc-msm8994.h> +#include <dt-bindings/clock/qcom,rpmcc.h> #include <dt-bindings/power/qcom-rpmpd.h> / { @@ -12,6 +14,11 @@ #address-cells = <2>; #size-cells = <2>; + aliases { + mmc1 = &sdhc1; + mmc2 = &sdhc2; + }; + chosen { }; clocks { @@ -183,8 +190,8 @@ no-map; }; - cont_splash_mem: memory@3800000 { - reg = <0 0x03800000 0 0x2400000>; + cont_splash_mem: memory@3401000 { + reg = <0 0x03401000 0 0x2200000>; no-map; }; @@ -233,7 +240,6 @@ interrupts = <GIC_SPI 168 IRQ_TYPE_EDGE_RISING>; qcom,ipc = <&apcs 8 0>; qcom,smd-edge = <15>; - qcom,local-pid = <0>; qcom,remote-pid = <6>; rpm_requests: rpm-requests { @@ -241,7 +247,7 @@ qcom,smd-channels = "rpm_requests"; rpmcc: rpmcc { - compatible = "qcom,rpmcc-msm8994"; + compatible = "qcom,rpmcc-msm8994", "qcom,rpmcc"; #clock-cells = <1>; }; @@ -354,6 +360,15 @@ #mbox-cells = <1>; }; + watchdog@f9017000 { + compatible = "qcom,apss-wdt-msm8994", "qcom,kpss-wdt"; + reg = <0xf9017000 0x1000>; + interrupts = <GIC_SPI 3 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 4 IRQ_TYPE_EDGE_RISING>; + clocks = <&sleep_clk>; + timeout-sec = <10>; + }; + timer@f9020000 { #address-cells = <1>; #size-cells = <1>; @@ -498,7 +513,7 @@ #dma-cells = <1>; qcom,ee = <0>; qcom,controlled-remotely; - num-channels = <18>; + num-channels = <24>; qcom,num-ees = <4>; }; @@ -519,9 +534,9 @@ compatible = "qcom,i2c-qup-v2.2.1"; reg = <0xf9923000 0x500>; interrupts = <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&gcc GCC_BLSP1_AHB_CLK>, - <&gcc GCC_BLSP1_QUP1_I2C_APPS_CLK>; - clock-names = "iface", "core"; + clocks = <&gcc GCC_BLSP1_QUP1_I2C_APPS_CLK>, + <&gcc GCC_BLSP1_AHB_CLK>; + clock-names = "core", "iface"; clock-frequency = <400000>; dmas = <&blsp1_dma 12>, <&blsp1_dma 13>; dma-names = "tx", "rx"; @@ -555,9 +570,9 @@ compatible = "qcom,i2c-qup-v2.2.1"; reg = <0xf9924000 0x500>; interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&gcc GCC_BLSP1_AHB_CLK>, - <&gcc GCC_BLSP1_QUP2_I2C_APPS_CLK>; - clock-names = "iface", "core"; + clocks = <&gcc GCC_BLSP1_QUP2_I2C_APPS_CLK>, + <&gcc GCC_BLSP1_AHB_CLK>; + clock-names = "core", "iface"; clock-frequency = <400000>; dmas = <&blsp1_dma 14>, <&blsp1_dma 15>; dma-names = "tx", "rx"; @@ -575,9 +590,9 @@ compatible = "qcom,i2c-qup-v2.2.1"; reg = <0xf9926000 0x500>; interrupts = <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&gcc GCC_BLSP1_AHB_CLK>, - <&gcc GCC_BLSP1_QUP4_I2C_APPS_CLK>; - clock-names = "iface", "core"; + clocks = <&gcc GCC_BLSP1_QUP4_I2C_APPS_CLK>, + <&gcc GCC_BLSP1_AHB_CLK>; + clock-names = "core", "iface"; clock-frequency = <400000>; dmas = <&blsp1_dma 18>, <&blsp1_dma 19>; dma-names = "tx", "rx"; @@ -593,9 +608,9 @@ compatible = "qcom,i2c-qup-v2.2.1"; reg = <0xf9927000 0x500>; interrupts = <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&gcc GCC_BLSP1_AHB_CLK>, - <&gcc GCC_BLSP1_QUP5_I2C_APPS_CLK>; - clock-names = "iface", "core"; + clocks = <&gcc GCC_BLSP1_QUP5_I2C_APPS_CLK>, + <&gcc GCC_BLSP1_AHB_CLK>; + clock-names = "core", "iface"; clock-frequency = <400000>; dmas = <&blsp2_dma 20>, <&blsp2_dma 21>; dma-names = "tx", "rx"; @@ -611,9 +626,9 @@ compatible = "qcom,i2c-qup-v2.2.1"; reg = <0xf9928000 0x500>; interrupts = <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&gcc GCC_BLSP1_AHB_CLK>, - <&gcc GCC_BLSP1_QUP6_I2C_APPS_CLK>; - clock-names = "iface", "core"; + clocks = <&gcc GCC_BLSP1_QUP6_I2C_APPS_CLK>, + <&gcc GCC_BLSP1_AHB_CLK>; + clock-names = "core", "iface"; clock-frequency = <400000>; dmas = <&blsp1_dma 22>, <&blsp1_dma 23>; dma-names = "tx", "rx"; @@ -634,7 +649,7 @@ #dma-cells = <1>; qcom,ee = <0>; qcom,controlled-remotely; - num-channels = <18>; + num-channels = <24>; qcom,num-ees = <4>; }; @@ -657,9 +672,9 @@ compatible = "qcom,i2c-qup-v2.2.1"; reg = <0xf9963000 0x500>; interrupts = <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&gcc GCC_BLSP2_AHB_CLK>, - <&gcc GCC_BLSP2_QUP1_I2C_APPS_CLK>; - clock-names = "iface", "core"; + clocks = <&gcc GCC_BLSP2_QUP1_I2C_APPS_CLK>, + <&gcc GCC_BLSP2_AHB_CLK>; + clock-names = "core", "iface"; clock-frequency = <400000>; dmas = <&blsp2_dma 12>, <&blsp2_dma 13>; dma-names = "tx", "rx"; @@ -693,9 +708,9 @@ compatible = "qcom,i2c-qup-v2.2.1"; reg = <0xf9967000 0x500>; interrupts = <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&gcc GCC_BLSP2_AHB_CLK>, - <&gcc GCC_BLSP2_QUP5_I2C_APPS_CLK>; - clock-names = "iface", "core"; + clocks = <&gcc GCC_BLSP2_QUP5_I2C_APPS_CLK>, + <&gcc GCC_BLSP2_AHB_CLK>; + clock-names = "core", "iface"; clock-frequency = <355000>; dmas = <&blsp2_dma 20>, <&blsp2_dma 21>; dma-names = "tx", "rx"; @@ -714,7 +729,7 @@ #power-domain-cells = <1>; reg = <0xfc400000 0x2000>; - clock-names = "xo", "sleep_clk"; + clock-names = "xo", "sleep"; clocks = <&xo_board>, <&sleep_clk>; }; @@ -1012,6 +1027,61 @@ drive-strength = <2>; }; }; + + mmcc: clock-controller@fd8c0000 { + compatible = "qcom,mmcc-msm8994"; + reg = <0xfd8c0000 0x5200>; + #clock-cells = <1>; + #reset-cells = <1>; + #power-domain-cells = <1>; + + clock-names = "xo", + "gpll0", + "mmssnoc_ahb", + "oxili_gfx3d_clk_src", + "dsi0pll", + "dsi0pllbyte", + "dsi1pll", + "dsi1pllbyte", + "hdmipll"; + clocks = <&xo_board>, + <&gcc GPLL0_OUT_MMSSCC>, + <&rpmcc RPM_SMD_MMSSNOC_AHB_CLK>, + <&rpmcc RPM_SMD_GFX3D_CLK_SRC>, + <0>, + <0>, + <0>, + <0>, + <0>; + + assigned-clocks = <&mmcc MMPLL0_PLL>, + <&mmcc MMPLL1_PLL>, + <&mmcc MMPLL3_PLL>, + <&mmcc MMPLL4_PLL>, + <&mmcc MMPLL5_PLL>; + assigned-clock-rates = <800000000>, + <1167000000>, + <1020000000>, + <960000000>, + <600000000>; + }; + + ocmem: ocmem@fdd00000 { + compatible = "qcom,msm8974-ocmem"; + reg = <0xfdd00000 0x2000>, + <0xfec00000 0x200000>; + reg-names = "ctrl", "mem"; + clocks = <&rpmcc RPM_SMD_OCMEMGX_CLK>, + <&mmcc OCMEMCX_OCMEMNOC_CLK>; + clock-names = "core", "iface"; + + #address-cells = <1>; + #size-cells = <1>; + + gmu_sram: gmu-sram@0 { + reg = <0x0 0x180000>; + }; + }; }; timer: timer { diff --git a/arch/arm64/boot/dts/qcom/msm8996-mtp.dts b/arch/arm64/boot/dts/qcom/msm8996-mtp.dts index 6a1699a96c99..596ad4c896f5 100644 --- a/arch/arm64/boot/dts/qcom/msm8996-mtp.dts +++ b/arch/arm64/boot/dts/qcom/msm8996-mtp.dts @@ -18,12 +18,10 @@ chosen { stdout-path = "serial0"; }; +}; - soc { - serial@75b0000 { - status = "okay"; - }; - }; +&blsp2_uart2 { + status = "okay"; }; &hdmi { diff --git a/arch/arm64/boot/dts/qcom/msm8996-sony-xperia-tone.dtsi b/arch/arm64/boot/dts/qcom/msm8996-sony-xperia-tone.dtsi index 3bb50cecd62d..ca3c633f5a45 100644 --- a/arch/arm64/boot/dts/qcom/msm8996-sony-xperia-tone.dtsi +++ b/arch/arm64/boot/dts/qcom/msm8996-sony-xperia-tone.dtsi @@ -13,9 +13,10 @@ #include <dt-bindings/pinctrl/qcom,pmic-gpio.h> #include <dt-bindings/pinctrl/qcom,pmic-mpp.h> -/delete-node/ &slpi_region; -/delete-node/ &venus_region; -/delete-node/ &zap_shader_region; +/delete-node/ &adsp_mem; +/delete-node/ &slpi_mem; +/delete-node/ &venus_mem; +/delete-node/ &gpu_mem; / { qcom,msm-id = <246 0x30001>; /* MSM8996 V3.1 (Final) */ @@ -46,18 +47,23 @@ no-map; }; - zap_shader_region: gpu@90400000 { + adsp_mem: adsp@8ea00000 { + reg = <0x0 0x8ea00000 0x0 0x1a00000>; + no-map; + }; + + gpu_mem: gpu@90400000 { compatible = "shared-dma-pool"; reg = <0x0 0x90400000 0x0 0x2000>; no-map; }; - slpi_region: memory@90500000 { + slpi_mem: memory@90500000 { reg = <0 0x90500000 0 0xa00000>; no-map; }; - venus_region: memory@90f00000 { + venus_mem: memory@90f00000 { reg = <0 0x90f00000 0 0x500000>; no-map; }; diff --git a/arch/arm64/boot/dts/qcom/msm8996-xiaomi-common.dtsi b/arch/arm64/boot/dts/qcom/msm8996-xiaomi-common.dtsi index 7a9fcbe9bb31..be4f643b1fd1 100644 --- a/arch/arm64/boot/dts/qcom/msm8996-xiaomi-common.dtsi +++ b/arch/arm64/boot/dts/qcom/msm8996-xiaomi-common.dtsi @@ -66,32 +66,32 @@ /* This platform has all PIL regions offset by 0x1400000 */ /delete-node/ mpss@88800000; - mpss_region: mpss@89c00000 { + mpss_mem: mpss@89c00000 { reg = <0x0 0x89c00000 0x0 0x6200000>; no-map; }; /delete-node/ adsp@8ea00000; - adsp_region: adsp@8ea00000 { + adsp_mem: adsp@8fe00000 { reg = <0x0 0x8fe00000 0x0 0x1b00000>; no-map; }; - /delete-node/ slpi@90b00000; - slpi_region: slpi@91900000 { + /delete-node/ slpi@90500000; + slpi_mem: slpi@91900000 { reg = <0x0 0x91900000 0x0 0xa00000>; no-map; }; - /delete-node/ gpu@8f200000; - zap_shader_region: gpu@92300000 { + /delete-node/ gpu@90f00000; + gpu_mem: gpu@92300000 { compatible = "shared-dma-pool"; reg = <0x0 0x92300000 0x0 0x2000>; no-map; }; /delete-node/ venus@91000000; - venus_region: venus@90400000 { + venus_mem: venus@92400000 { reg = <0x0 0x92400000 0x0 0x500000>; no-map; }; @@ -107,7 +107,7 @@ pmsg-size = <0x40000>; }; - /delete-node/ rmtfs@86700000; + /delete-node/ rmtfs; rmtfs@f6c00000 { compatible = "qcom,rmtfs-mem"; reg = <0 0xf6c00000 0 0x200000>; @@ -118,7 +118,7 @@ }; /delete-node/ mba@91500000; - mba_region: mba@f6f00000 { + mba_mem: mba@f6f00000 { reg = <0x0 0xf6f00000 0x0 0x100000>; no-map; }; @@ -267,6 +267,12 @@ vdd-gfx-supply = <&vdd_gfx>; }; +&mss_pil { + status = "okay"; + + pll-supply = <&vreg_l12a_1p8>; +}; + &pcie0 { status = "okay"; @@ -291,6 +297,12 @@ linux,code = <KEY_VOLUMEDOWN>; }; +&slpi_pil { + status = "okay"; + + px-supply = <&vreg_lvs2a_1p8>; +}; + &usb3 { status = "okay"; extcon = <&typec>; @@ -336,13 +348,7 @@ vdda-phy-supply = <&vreg_l28a_0p925>; vdda-pll-supply = <&vreg_l12a_1p8>; - - vdda-phy-max-microamp = <18380>; - vdda-pll-max-microamp = <9440>; - vddp-ref-clk-supply = <&vreg_l25a_1p2>; - vddp-ref-clk-max-microamp = <100>; - vddp-ref-clk-always-on; }; &venus { diff --git a/arch/arm64/boot/dts/qcom/msm8996-xiaomi-gemini.dts b/arch/arm64/boot/dts/qcom/msm8996-xiaomi-gemini.dts index 34f82e06ef53..22978d06f85b 100644 --- a/arch/arm64/boot/dts/qcom/msm8996-xiaomi-gemini.dts +++ b/arch/arm64/boot/dts/qcom/msm8996-xiaomi-gemini.dts @@ -130,6 +130,11 @@ status = "okay"; }; +&mss_pil { + firmware-name = "qcom/msm8996/gemini/mba.mbn", + "qcom/msm8996/gemini/modem.mbn"; +}; + &q6asmdai { dai@0 { reg = <0>; @@ -144,6 +149,10 @@ }; }; +&slpi_pil { + firmware-name = "qcom/msm8996/gemini/slpi.mbn"; +}; + &sound { compatible = "qcom,apq8096-sndcard"; model = "gemini"; diff --git a/arch/arm64/boot/dts/qcom/msm8996-xiaomi-scorpio.dts b/arch/arm64/boot/dts/qcom/msm8996-xiaomi-scorpio.dts index 27a45ddbb5bd..1e2dd6763ad1 100644 --- a/arch/arm64/boot/dts/qcom/msm8996-xiaomi-scorpio.dts +++ b/arch/arm64/boot/dts/qcom/msm8996-xiaomi-scorpio.dts @@ -111,6 +111,11 @@ status = "disabled"; }; +&mss_pil { + firmware-name = "qcom/msm8996/scorpio/mba.mbn", + "qcom/msm8996/scorpio/modem.mbn"; +}; + &q6asmdai { dai@0 { reg = <0>; @@ -125,6 +130,10 @@ }; }; +&slpi_pil { + firmware-name = "qcom/msm8996/scorpio/slpi.mbn"; +}; + &sound { compatible = "qcom,apq8096-sndcard"; model = "scorpio"; diff --git a/arch/arm64/boot/dts/qcom/msm8996.dtsi b/arch/arm64/boot/dts/qcom/msm8996.dtsi index b9a48cfd760f..205af7b479a8 100644 --- a/arch/arm64/boot/dts/qcom/msm8996.dtsi +++ b/arch/arm64/boot/dts/qcom/msm8996.dtsi @@ -384,60 +384,65 @@ #size-cells = <2>; ranges; - mba_region: mba@91500000 { - reg = <0x0 0x91500000 0x0 0x200000>; + hyp_mem: memory@85800000 { + reg = <0x0 0x85800000 0x0 0x600000>; no-map; }; - slpi_region: slpi@90b00000 { - reg = <0x0 0x90b00000 0x0 0xa00000>; + xbl_mem: memory@85e00000 { + reg = <0x0 0x85e00000 0x0 0x200000>; no-map; }; - venus_region: venus@90400000 { - reg = <0x0 0x90400000 0x0 0x700000>; + smem_mem: smem-mem@86000000 { + reg = <0x0 0x86000000 0x0 0x200000>; no-map; }; - adsp_region: adsp@8ea00000 { - reg = <0x0 0x8ea00000 0x0 0x1a00000>; + tz_mem: memory@86200000 { + reg = <0x0 0x86200000 0x0 0x2600000>; no-map; }; - mpss_region: mpss@88800000 { - reg = <0x0 0x88800000 0x0 0x6200000>; + rmtfs_mem: rmtfs { + compatible = "qcom,rmtfs-mem"; + + size = <0x0 0x200000>; + alloc-ranges = <0x0 0xa0000000 0x0 0x2000000>; no-map; + + qcom,client-id = <1>; + qcom,vmid = <15>; }; - smem_mem: smem-mem@86000000 { - reg = <0x0 0x86000000 0x0 0x200000>; + mpss_mem: mpss@88800000 { + reg = <0x0 0x88800000 0x0 0x6200000>; no-map; }; - memory@85800000 { - reg = <0x0 0x85800000 0x0 0x800000>; + adsp_mem: adsp@8ea00000 { + reg = <0x0 0x8ea00000 0x0 0x1b00000>; no-map; }; - memory@86200000 { - reg = <0x0 0x86200000 0x0 0x2600000>; + slpi_mem: slpi@90500000 { + reg = <0x0 0x90500000 0x0 0xa00000>; no-map; }; - rmtfs@86700000 { - compatible = "qcom,rmtfs-mem"; - - size = <0x0 0x200000>; - alloc-ranges = <0x0 0xa0000000 0x0 0x2000000>; + gpu_mem: gpu@90f00000 { + compatible = "shared-dma-pool"; + reg = <0x0 0x90f00000 0x0 0x100000>; no-map; + }; - qcom,client-id = <1>; - qcom,vmid = <15>; + venus_mem: venus@91000000 { + reg = <0x0 0x91000000 0x0 0x500000>; + no-map; }; - zap_shader_region: gpu@8f200000 { - compatible = "shared-dma-pool"; - reg = <0x0 0x90b00000 0x0 0xa00000>; + mba_mem: mba@91500000 { + reg = <0x0 0x91500000 0x0 0x200000>; no-map; }; }; @@ -456,7 +461,7 @@ qcom,glink-channels = "rpm_requests"; rpmcc: qcom,rpmcc { - compatible = "qcom,rpmcc-msm8996"; + compatible = "qcom,rpmcc-msm8996", "qcom,rpmcc"; #clock-cells = <1>; }; @@ -513,12 +518,12 @@ qcom,local-pid = <0>; qcom,remote-pid = <2>; - smp2p_adsp_out: master-kernel { + adsp_smp2p_out: master-kernel { qcom,entry-name = "master-kernel"; #qcom,smem-state-cells = <1>; }; - smp2p_adsp_in: slave-kernel { + adsp_smp2p_in: slave-kernel { qcom,entry-name = "slave-kernel"; interrupt-controller; @@ -526,7 +531,7 @@ }; }; - smp2p-modem { + smp2p-mpss { compatible = "qcom,smp2p"; qcom,smem = <435>, <428>; @@ -537,12 +542,12 @@ qcom,local-pid = <0>; qcom,remote-pid = <1>; - modem_smp2p_out: master-kernel { + mpss_smp2p_out: master-kernel { qcom,entry-name = "master-kernel"; #qcom,smem-state-cells = <1>; }; - modem_smp2p_in: slave-kernel { + mpss_smp2p_in: slave-kernel { qcom,entry-name = "slave-kernel"; interrupt-controller; @@ -561,16 +566,17 @@ qcom,local-pid = <0>; qcom,remote-pid = <3>; - smp2p_slpi_in: slave-kernel { + slpi_smp2p_out: master-kernel { + qcom,entry-name = "master-kernel"; + #qcom,smem-state-cells = <1>; + }; + + slpi_smp2p_in: slave-kernel { qcom,entry-name = "slave-kernel"; + interrupt-controller; #interrupt-cells = <2>; }; - - smp2p_slpi_out: master-kernel { - qcom,entry-name = "master-kernel"; - #qcom,smem-state-cells = <1>; - }; }; soc: soc { @@ -707,7 +713,7 @@ #thermal-sensor-cells = <1>; }; - cryptobam: dma@644000 { + cryptobam: dma-controller@644000 { compatible = "qcom,bam-v1.7.0"; reg = <0x00644000 0x24000>; interrupts = <GIC_SPI 206 IRQ_TYPE_LEVEL_HIGH>; @@ -788,7 +794,7 @@ reg-names = "mdp_phys"; interrupt-parent = <&mdss>; - interrupts = <0 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <0>; clocks = <&mmcc MDSS_AHB_CLK>, <&mmcc MDSS_AXI_CLK>, @@ -834,7 +840,7 @@ reg-names = "dsi_ctrl"; interrupt-parent = <&mdss>; - interrupts = <4 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <4>; clocks = <&mmcc MDSS_MDP_CLK>, <&mmcc MDSS_BYTE0_CLK>, @@ -904,7 +910,7 @@ "hdcp_physical"; interrupt-parent = <&mdss>; - interrupts = <8 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <8>; clocks = <&mmcc MDSS_MDP_CLK>, <&mmcc MDSS_AHB_CLK>, @@ -1033,7 +1039,7 @@ }; zap-shader { - memory-region = <&zap_shader_region>; + memory-region = <&gpu_mem>; }; }; @@ -1574,7 +1580,7 @@ ranges; pcie0: pcie@600000 { - compatible = "qcom,pcie-msm8996", "snps,dw-pcie"; + compatible = "qcom,pcie-msm8996"; status = "disabled"; power-domains = <&gcc PCIE0_GDSC>; bus-range = <0x00 0xff>; @@ -1626,7 +1632,7 @@ }; pcie1: pcie@608000 { - compatible = "qcom,pcie-msm8996", "snps,dw-pcie"; + compatible = "qcom,pcie-msm8996"; power-domains = <&gcc PCIE1_GDSC>; bus-range = <0x00 0xff>; num-lanes = <1>; @@ -1679,7 +1685,7 @@ }; pcie2: pcie@610000 { - compatible = "qcom,pcie-msm8996", "snps,dw-pcie"; + compatible = "qcom,pcie-msm8996"; power-domains = <&gcc PCIE2_GDSC>; bus-range = <0x00 0xff>; num-lanes = <1>; @@ -1730,7 +1736,8 @@ }; ufshc: ufshc@624000 { - compatible = "qcom,ufshc"; + compatible = "qcom,msm8996-ufshc", "qcom,ufshc", + "jedec,ufs-2.0"; reg = <0x00624000 0x2500>; interrupts = <GIC_SPI 265 IRQ_TYPE_LEVEL_HIGH>; @@ -2026,7 +2033,7 @@ <&venus_smmu 0x2c>, <&venus_smmu 0x2d>, <&venus_smmu 0x31>; - memory-region = <&venus_region>; + memory-region = <&venus_mem>; status = "disabled"; video-decoder { @@ -2122,6 +2129,105 @@ clock-names = "iface", "bus"; }; + slpi_pil: remoteproc@1c00000 { + compatible = "qcom,msm8996-slpi-pil"; + reg = <0x01c00000 0x4000>; + + interrupts-extended = <&intc 0 390 IRQ_TYPE_EDGE_RISING>, + <&slpi_smp2p_in 0 IRQ_TYPE_EDGE_RISING>, + <&slpi_smp2p_in 1 IRQ_TYPE_EDGE_RISING>, + <&slpi_smp2p_in 2 IRQ_TYPE_EDGE_RISING>, + <&slpi_smp2p_in 3 IRQ_TYPE_EDGE_RISING>; + interrupt-names = "wdog", + "fatal", + "ready", + "handover", + "stop-ack"; + + clocks = <&xo_board>, + <&rpmcc RPM_SMD_AGGR2_NOC_CLK>; + clock-names = "xo", "aggre2"; + + memory-region = <&slpi_mem>; + + qcom,smem-states = <&slpi_smp2p_out 0>; + qcom,smem-state-names = "stop"; + + power-domains = <&rpmpd MSM8996_VDDSSCX>; + power-domain-names = "ssc_cx"; + + status = "disabled"; + + smd-edge { + interrupts = <GIC_SPI 176 IRQ_TYPE_EDGE_RISING>; + + label = "dsps"; + mboxes = <&apcs_glb 25>; + qcom,smd-edge = <3>; + qcom,remote-pid = <3>; + }; + }; + + mss_pil: remoteproc@2080000 { + compatible = "qcom,msm8996-mss-pil"; + reg = <0x2080000 0x100>, + <0x2180000 0x020>; + reg-names = "qdsp6", "rmb"; + + interrupts-extended = <&intc 0 448 IRQ_TYPE_EDGE_RISING>, + <&mpss_smp2p_in 0 IRQ_TYPE_EDGE_RISING>, + <&mpss_smp2p_in 1 IRQ_TYPE_EDGE_RISING>, + <&mpss_smp2p_in 2 IRQ_TYPE_EDGE_RISING>, + <&mpss_smp2p_in 3 IRQ_TYPE_EDGE_RISING>, + <&mpss_smp2p_in 7 IRQ_TYPE_EDGE_RISING>; + interrupt-names = "wdog", "fatal", "ready", + "handover", "stop-ack", + "shutdown-ack"; + + clocks = <&gcc GCC_MSS_CFG_AHB_CLK>, + <&gcc GCC_MSS_Q6_BIMC_AXI_CLK>, + <&gcc GCC_BOOT_ROM_AHB_CLK>, + <&xo_board>, + <&gcc GCC_MSS_GPLL0_DIV_CLK>, + <&gcc GCC_MSS_SNOC_AXI_CLK>, + <&gcc GCC_MSS_MNOC_BIMC_AXI_CLK>, + <&rpmcc RPM_SMD_PCNOC_CLK>, + <&rpmcc RPM_SMD_QDSS_CLK>; + clock-names = "iface", "bus", "mem", "xo", "gpll0_mss", + "snoc_axi", "mnoc_axi", "pnoc", "qdss"; + + resets = <&gcc GCC_MSS_RESTART>; + reset-names = "mss_restart"; + + power-domains = <&rpmpd MSM8996_VDDCX>, + <&rpmpd MSM8996_VDDMX>; + power-domain-names = "cx", "mx"; + + qcom,smem-states = <&mpss_smp2p_out 0>; + qcom,smem-state-names = "stop"; + + qcom,halt-regs = <&tcsr_mutex_regs 0x23000 0x25000 0x24000>; + + status = "disabled"; + + mba { + memory-region = <&mba_mem>; + }; + + mpss { + memory-region = <&mpss_mem>; + }; + + smd-edge { + interrupts = <GIC_SPI 449 IRQ_TYPE_EDGE_RISING>; + + label = "mpss"; + mboxes = <&apcs_glb 12>; + qcom,smd-edge = <0>; + qcom,remote-pid = <1>; + }; + }; + stm@3002000 { compatible = "arm,coresight-stm", "arm,primecell"; reg = <0x3002000 0x1000>, @@ -2786,9 +2892,9 @@ compatible = "qcom,i2c-qup-v2.2.1"; reg = <0x07577000 0x1000>; interrupts = <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&gcc GCC_BLSP1_AHB_CLK>, - <&gcc GCC_BLSP1_QUP3_I2C_APPS_CLK>; - clock-names = "iface", "core"; + clocks = <&gcc GCC_BLSP1_QUP3_I2C_APPS_CLK>, + <&gcc GCC_BLSP1_AHB_CLK>; + clock-names = "core", "iface"; pinctrl-names = "default", "sleep"; pinctrl-0 = <&blsp1_i2c3_default>; pinctrl-1 = <&blsp1_i2c3_sleep>; @@ -2834,9 +2940,9 @@ compatible = "qcom,i2c-qup-v2.2.1"; reg = <0x075b5000 0x1000>; interrupts = <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&gcc GCC_BLSP2_AHB_CLK>, - <&gcc GCC_BLSP2_QUP1_I2C_APPS_CLK>; - clock-names = "iface", "core"; + clocks = <&gcc GCC_BLSP2_QUP1_I2C_APPS_CLK>, + <&gcc GCC_BLSP2_AHB_CLK>; + clock-names = "core", "iface"; pinctrl-names = "default", "sleep"; pinctrl-0 = <&blsp2_i2c1_default>; pinctrl-1 = <&blsp2_i2c1_sleep>; @@ -2851,9 +2957,9 @@ compatible = "qcom,i2c-qup-v2.2.1"; reg = <0x075b6000 0x1000>; interrupts = <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&gcc GCC_BLSP2_AHB_CLK>, - <&gcc GCC_BLSP2_QUP2_I2C_APPS_CLK>; - clock-names = "iface", "core"; + clocks = <&gcc GCC_BLSP2_QUP2_I2C_APPS_CLK>, + <&gcc GCC_BLSP2_AHB_CLK>; + clock-names = "core", "iface"; pinctrl-names = "default", "sleep"; pinctrl-0 = <&blsp2_i2c2_default>; pinctrl-1 = <&blsp2_i2c2_sleep>; @@ -2868,9 +2974,9 @@ compatible = "qcom,i2c-qup-v2.2.1"; reg = <0x075b7000 0x1000>; interrupts = <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&gcc GCC_BLSP2_AHB_CLK>, - <&gcc GCC_BLSP2_QUP3_I2C_APPS_CLK>; - clock-names = "iface", "core"; + clocks = <&gcc GCC_BLSP2_QUP3_I2C_APPS_CLK>, + <&gcc GCC_BLSP2_AHB_CLK>; + clock-names = "core", "iface"; clock-frequency = <400000>; pinctrl-names = "default", "sleep"; pinctrl-0 = <&blsp2_i2c3_default>; @@ -2886,9 +2992,9 @@ compatible = "qcom,i2c-qup-v2.2.1"; reg = <0x75b9000 0x1000>; interrupts = <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&gcc GCC_BLSP2_AHB_CLK>, - <&gcc GCC_BLSP2_QUP5_I2C_APPS_CLK>; - clock-names = "iface", "core"; + clocks = <&gcc GCC_BLSP2_QUP5_I2C_APPS_CLK>, + <&gcc GCC_BLSP2_AHB_CLK>; + clock-names = "core", "iface"; pinctrl-names = "default"; pinctrl-0 = <&blsp2_i2c5_default>; dmas = <&blsp2_dma 20>, <&blsp2_dma 21>; @@ -2902,9 +3008,9 @@ compatible = "qcom,i2c-qup-v2.2.1"; reg = <0x75ba000 0x1000>; interrupts = <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&gcc GCC_BLSP2_AHB_CLK>, - <&gcc GCC_BLSP2_QUP6_I2C_APPS_CLK>; - clock-names = "iface", "core"; + clocks = <&gcc GCC_BLSP2_QUP6_I2C_APPS_CLK>, + <&gcc GCC_BLSP2_AHB_CLK>; + clock-names = "core", "iface"; pinctrl-names = "default", "sleep"; pinctrl-0 = <&blsp2_i2c6_default>; pinctrl-1 = <&blsp2_i2c6_sleep>; @@ -3023,19 +3129,19 @@ reg = <0x09300000 0x80000>; interrupts-extended = <&intc 0 162 IRQ_TYPE_EDGE_RISING>, - <&smp2p_adsp_in 0 IRQ_TYPE_EDGE_RISING>, - <&smp2p_adsp_in 1 IRQ_TYPE_EDGE_RISING>, - <&smp2p_adsp_in 2 IRQ_TYPE_EDGE_RISING>, - <&smp2p_adsp_in 3 IRQ_TYPE_EDGE_RISING>; + <&adsp_smp2p_in 0 IRQ_TYPE_EDGE_RISING>, + <&adsp_smp2p_in 1 IRQ_TYPE_EDGE_RISING>, + <&adsp_smp2p_in 2 IRQ_TYPE_EDGE_RISING>, + <&adsp_smp2p_in 3 IRQ_TYPE_EDGE_RISING>; interrupt-names = "wdog", "fatal", "ready", "handover", "stop-ack"; clocks = <&rpmcc RPM_SMD_BB_CLK1>; clock-names = "xo"; - memory-region = <&adsp_region>; + memory-region = <&adsp_mem>; - qcom,smem-states = <&smp2p_adsp_out 0>; + qcom,smem-states = <&adsp_smp2p_out 0>; qcom,smem-state-names = "stop"; power-domains = <&rpmpd MSM8996_VDDCX>; diff --git a/arch/arm64/boot/dts/qcom/msm8998-oneplus-common.dtsi b/arch/arm64/boot/dts/qcom/msm8998-oneplus-common.dtsi index 9823d48a91b1..dbaea360bffc 100644 --- a/arch/arm64/boot/dts/qcom/msm8998-oneplus-common.dtsi +++ b/arch/arm64/boot/dts/qcom/msm8998-oneplus-common.dtsi @@ -188,6 +188,23 @@ }; }; +&blsp1_i2c6 { + status = "okay"; + + nfc@28 { + compatible = "nxp,nxp-nci-i2c"; + reg = <0x28>; + + interrupt-parent = <&tlmm>; + interrupts = <92 IRQ_TYPE_LEVEL_HIGH>; + + enable-gpios = <&tlmm 116 GPIO_ACTIVE_HIGH>; + + pinctrl-names = "default"; + pinctrl-0 = <&nfc_int_active &nfc_enable_active>; + }; +}; + &blsp1_uart3 { status = "okay"; @@ -462,6 +479,20 @@ drive-strength = <8>; bias-pull-up; }; + + nfc_int_active: nfc-int-active { + pins = "gpio92"; + function = "gpio"; + drive-strength = <6>; + bias-pull-up; + }; + + nfc_enable_active: nfc-enable-active { + pins = "gpio12", "gpio116"; + function = "gpio"; + drive-strength = <6>; + bias-pull-up; + }; }; &ufshc { diff --git a/arch/arm64/boot/dts/qcom/msm8998.dtsi b/arch/arm64/boot/dts/qcom/msm8998.dtsi index 2fda21e810c9..4a84de6cee1e 100644 --- a/arch/arm64/boot/dts/qcom/msm8998.dtsi +++ b/arch/arm64/boot/dts/qcom/msm8998.dtsi @@ -815,6 +815,21 @@ clock-names = "xo", "sleep_clk"; clocks = <&xo>, <&sleep_clk>; + + /* + * The hypervisor typically configures the memory region where these clocks + * reside as read-only for the HLOS. If the HLOS tried to enable or disable + * these clocks on a device with such configuration (e.g. because they are + * enabled but unused during boot-up), the device will most likely decide + * to reboot. + * In light of that, we are conservative here and we list all such clocks + * as protected. The board dts (or a user-supplied dts) can override the + * list of protected clocks if it differs from the norm, and it is in fact + * desired for the HLOS to manage these clocks + */ + protected-clocks = <AGGRE2_SNOC_NORTH_AXI>, + <SSC_XO>, + <SSC_CNOC_AHBS_CLK>; }; rpm_msg_ram: sram@778000 { diff --git a/arch/arm64/boot/dts/qcom/pm8350.dtsi b/arch/arm64/boot/dts/qcom/pm8350.dtsi index 308f9ca7c744..b10f33afa5e3 100644 --- a/arch/arm64/boot/dts/qcom/pm8350.dtsi +++ b/arch/arm64/boot/dts/qcom/pm8350.dtsi @@ -6,6 +6,30 @@ #include <dt-bindings/interrupt-controller/irq.h> #include <dt-bindings/spmi/spmi.h> +/ { + thermal-zones { + pm8350_thermal: pm8350c-thermal { + polling-delay-passive = <100>; + polling-delay = <0>; + thermal-sensors = <&pm8350_temp_alarm>; + + trips { + pm8350_trip0: trip0 { + temperature = <95000>; + hysteresis = <0>; + type = "passive"; + }; + + pm8350_crit: pm8350c-crit { + temperature = <115000>; + hysteresis = <0>; + type = "critical"; + }; + }; + }; + }; +}; + &spmi_bus { pm8350: pmic@1 { compatible = "qcom,pm8350", "qcom,spmi-pmic"; @@ -13,6 +37,13 @@ #address-cells = <1>; #size-cells = <0>; + pm8350_temp_alarm: temp-alarm@a00 { + compatible = "qcom,spmi-temp-alarm"; + reg = <0xa00>; + interrupts = <0x1 0xa 0x0 IRQ_TYPE_EDGE_BOTH>; + #thermal-sensor-cells = <0>; + }; + pm8350_gpios: gpio@8800 { compatible = "qcom,pm8350-gpio"; reg = <0x8800>; diff --git a/arch/arm64/boot/dts/qcom/pm8350b.dtsi b/arch/arm64/boot/dts/qcom/pm8350b.dtsi index b23bb1d49a4d..f1d1d4c8edf8 100644 --- a/arch/arm64/boot/dts/qcom/pm8350b.dtsi +++ b/arch/arm64/boot/dts/qcom/pm8350b.dtsi @@ -6,6 +6,30 @@ #include <dt-bindings/interrupt-controller/irq.h> #include <dt-bindings/spmi/spmi.h> +/ { + thermal-zones { + pm8350b_thermal: pm8350c-thermal { + polling-delay-passive = <100>; + polling-delay = <0>; + thermal-sensors = <&pm8350b_temp_alarm>; + + trips { + pm8350b_trip0: trip0 { + temperature = <95000>; + hysteresis = <0>; + type = "passive"; + }; + + pm8350b_crit: pm8350c-crit { + temperature = <115000>; + hysteresis = <0>; + type = "critical"; + }; + }; + }; + }; +}; + &spmi_bus { pm8350b: pmic@3 { compatible = "qcom,pm8350b", "qcom,spmi-pmic"; @@ -13,6 +37,13 @@ #address-cells = <1>; #size-cells = <0>; + pm8350b_temp_alarm: temp-alarm@a00 { + compatible = "qcom,spmi-temp-alarm"; + reg = <0xa00>; + interrupts = <0x3 0xa 0x0 IRQ_TYPE_EDGE_BOTH>; + #thermal-sensor-cells = <0>; + }; + pm8350b_gpios: gpio@8800 { compatible = "qcom,pm8350b-gpio"; reg = <0x8800>; diff --git a/arch/arm64/boot/dts/qcom/pm8350c.dtsi b/arch/arm64/boot/dts/qcom/pm8350c.dtsi index e1b75ae0a823..e0bbb67717fe 100644 --- a/arch/arm64/boot/dts/qcom/pm8350c.dtsi +++ b/arch/arm64/boot/dts/qcom/pm8350c.dtsi @@ -29,26 +29,35 @@ interrupt-controller; #interrupt-cells = <2>; }; + + pm8350c_pwm: pwm@e800 { + compatible = "qcom,pm8350c-pwm"; + reg = <0xe800>; + #pwm-cells = <2>; + status = "disabled"; + }; }; }; -&thermal_zones { - pm8350c_thermal: pm8350c-thermal { - polling-delay-passive = <100>; - polling-delay = <0>; - thermal-sensors = <&pm8350c_temp_alarm>; - - trips { - pm8350c_trip0: trip0 { - temperature = <95000>; - hysteresis = <0>; - type = "passive"; - }; +/ { + thermal-zones { + pm8350c_thermal: pm8350c-thermal { + polling-delay-passive = <100>; + polling-delay = <0>; + thermal-sensors = <&pm8350c_temp_alarm>; + + trips { + pm8350c_trip0: trip0 { + temperature = <95000>; + hysteresis = <0>; + type = "passive"; + }; - pm8350c_crit: pm8350c-crit { - temperature = <115000>; - hysteresis = <0>; - type = "critical"; + pm8350c_crit: pm8350c-crit { + temperature = <115000>; + hysteresis = <0>; + type = "critical"; + }; }; }; }; diff --git a/arch/arm64/boot/dts/qcom/pm8450.dtsi b/arch/arm64/boot/dts/qcom/pm8450.dtsi new file mode 100644 index 000000000000..ae5bce3cf46e --- /dev/null +++ b/arch/arm64/boot/dts/qcom/pm8450.dtsi @@ -0,0 +1,59 @@ +// SPDX-License-Identifier: BSD-3-Clause +/* + * Copyright (c) 2022, Linaro Limited + */ + +#include <dt-bindings/interrupt-controller/irq.h> +#include <dt-bindings/spmi/spmi.h> + +/ { + thermal-zones { + pm8450-thermal { + polling-delay-passive = <100>; + polling-delay = <0>; + + thermal-sensors = <&pm8450_temp_alarm>; + + trips { + trip0 { + temperature = <95000>; + hysteresis = <0>; + type = "passive"; + }; + + trip1 { + temperature = <115000>; + hysteresis = <0>; + type = "hot"; + }; + }; + }; + }; +}; + + +&spmi_bus { + pm8450: pmic@7 { + compatible = "qcom,pm8450", "qcom,spmi-pmic"; + reg = <0x7 SPMI_USID>; + #address-cells = <1>; + #size-cells = <0>; + + pm8450_temp_alarm: temp-alarm@a00 { + compatible = "qcom,spmi-temp-alarm"; + reg = <0xa00>; + interrupts = <0x7 0xa 0x0 IRQ_TYPE_EDGE_BOTH>; + #thermal-sensor-cells = <0>; + }; + + pm8450_gpios: gpio@8800 { + compatible = "qcom,pm8450-gpio", "qcom,spmi-gpio"; + reg = <0x8800>; + gpio-controller; + gpio-ranges = <&pm8450_gpios 0 0 4>; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + }; +}; diff --git a/arch/arm64/boot/dts/qcom/pmr735a.dtsi b/arch/arm64/boot/dts/qcom/pmr735a.dtsi index b4b6ba24f845..febda50779f9 100644 --- a/arch/arm64/boot/dts/qcom/pmr735a.dtsi +++ b/arch/arm64/boot/dts/qcom/pmr735a.dtsi @@ -32,23 +32,25 @@ }; }; -&thermal_zones { - pmr735a_thermal: pmr735a-thermal { - polling-delay-passive = <100>; - polling-delay = <0>; - thermal-sensors = <&pmr735a_temp_alarm>; +/ { + thermal-zones { + pmr735a_thermal: pmr735a-thermal { + polling-delay-passive = <100>; + polling-delay = <0>; + thermal-sensors = <&pmr735a_temp_alarm>; - trips { - pmr735a_trip0: trip0 { - temperature = <95000>; - hysteresis = <0>; - type = "passive"; - }; + trips { + pmr735a_trip0: trip0 { + temperature = <95000>; + hysteresis = <0>; + type = "passive"; + }; - pmr735a_crit: pmr735a-crit { - temperature = <115000>; - hysteresis = <0>; - type = "critical"; + pmr735a_crit: pmr735a-crit { + temperature = <115000>; + hysteresis = <0>; + type = "critical"; + }; }; }; }; diff --git a/arch/arm64/boot/dts/qcom/pmr735b.dtsi b/arch/arm64/boot/dts/qcom/pmr735b.dtsi index 1144086280f5..604324188603 100644 --- a/arch/arm64/boot/dts/qcom/pmr735b.dtsi +++ b/arch/arm64/boot/dts/qcom/pmr735b.dtsi @@ -6,6 +6,30 @@ #include <dt-bindings/interrupt-controller/irq.h> #include <dt-bindings/spmi/spmi.h> +/ { + thermal-zones { + pmr735a_thermal: pmr735a-thermal { + polling-delay-passive = <100>; + polling-delay = <0>; + thermal-sensors = <&pmr735b_temp_alarm>; + + trips { + pmr735b_trip0: trip0 { + temperature = <95000>; + hysteresis = <0>; + type = "passive"; + }; + + pmr735b_crit: pmr735a-crit { + temperature = <115000>; + hysteresis = <0>; + type = "critical"; + }; + }; + }; + }; +}; + &spmi_bus { pmr735b: pmic@5 { compatible = "qcom,pmr735b", "qcom,spmi-pmic"; @@ -13,6 +37,13 @@ #address-cells = <1>; #size-cells = <0>; + pmr735b_temp_alarm: temp-alarm@a00 { + compatible = "qcom,spmi-temp-alarm"; + reg = <0xa00>; + interrupts = <0x5 0xa 0x0 IRQ_TYPE_EDGE_BOTH>; + #thermal-sensor-cells = <0>; + }; + pmr735b_gpios: gpio@8800 { compatible = "qcom,pmr735b-gpio"; reg = <0x8800>; diff --git a/arch/arm64/boot/dts/qcom/qcs404.dtsi b/arch/arm64/boot/dts/qcom/qcs404.dtsi index 3f06f7cd3cf2..bc446c6002d0 100644 --- a/arch/arm64/boot/dts/qcom/qcs404.dtsi +++ b/arch/arm64/boot/dts/qcom/qcs404.dtsi @@ -226,7 +226,7 @@ qcom,glink-channels = "rpm_requests"; rpmcc: clock-controller { - compatible = "qcom,rpmcc-qcs404"; + compatible = "qcom,rpmcc-qcs404", "qcom,rpmcc"; #clock-cells = <1>; }; @@ -823,8 +823,8 @@ interrupts = <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>; clocks = <&gcc GCC_BLSP1_UART0_APPS_CLK>, <&gcc GCC_BLSP1_AHB_CLK>; clock-names = "core", "iface"; - dmas = <&blsp1_dma 1>, <&blsp1_dma 0>; - dma-names = "rx", "tx"; + dmas = <&blsp1_dma 0>, <&blsp1_dma 1>; + dma-names = "tx", "rx"; pinctrl-names = "default"; pinctrl-0 = <&blsp1_uart0_default>; status = "disabled"; @@ -836,8 +836,8 @@ interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>; clocks = <&gcc GCC_BLSP1_UART1_APPS_CLK>, <&gcc GCC_BLSP1_AHB_CLK>; clock-names = "core", "iface"; - dmas = <&blsp1_dma 3>, <&blsp1_dma 2>; - dma-names = "rx", "tx"; + dmas = <&blsp1_dma 2>, <&blsp1_dma 3>; + dma-names = "tx", "rx"; pinctrl-names = "default"; pinctrl-0 = <&blsp1_uart1_default>; status = "disabled"; @@ -849,8 +849,8 @@ interrupts = <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>; clocks = <&gcc GCC_BLSP1_UART2_APPS_CLK>, <&gcc GCC_BLSP1_AHB_CLK>; clock-names = "core", "iface"; - dmas = <&blsp1_dma 5>, <&blsp1_dma 4>; - dma-names = "rx", "tx"; + dmas = <&blsp1_dma 4>, <&blsp1_dma 5>; + dma-names = "tx", "rx"; pinctrl-names = "default"; pinctrl-0 = <&blsp1_uart2_default>; status = "okay"; @@ -903,8 +903,8 @@ interrupts = <GIC_SPI 119 IRQ_TYPE_LEVEL_HIGH>; clocks = <&gcc GCC_BLSP1_UART3_APPS_CLK>, <&gcc GCC_BLSP1_AHB_CLK>; clock-names = "core", "iface"; - dmas = <&blsp1_dma 7>, <&blsp1_dma 6>; - dma-names = "rx", "tx"; + dmas = <&blsp1_dma 6>, <&blsp1_dma 7>; + dma-names = "tx", "rx"; pinctrl-names = "default"; pinctrl-0 = <&blsp1_uart3_default>; status = "disabled"; @@ -914,9 +914,9 @@ compatible = "qcom,i2c-qup-v2.2.1"; reg = <0x078b5000 0x600>; interrupts = <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&gcc GCC_BLSP1_AHB_CLK>, - <&gcc GCC_BLSP1_QUP0_I2C_APPS_CLK>; - clock-names = "iface", "core"; + clocks = <&gcc GCC_BLSP1_QUP0_I2C_APPS_CLK>, + <&gcc GCC_BLSP1_AHB_CLK>; + clock-names = "core", "iface"; pinctrl-names = "default"; pinctrl-0 = <&blsp1_i2c0_default>; #address-cells = <1>; @@ -928,9 +928,9 @@ compatible = "qcom,spi-qup-v2.2.1"; reg = <0x078b5000 0x600>; interrupts = <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&gcc GCC_BLSP1_AHB_CLK>, - <&gcc GCC_BLSP1_QUP0_SPI_APPS_CLK>; - clock-names = "iface", "core"; + clocks = <&gcc GCC_BLSP1_QUP0_SPI_APPS_CLK>, + <&gcc GCC_BLSP1_AHB_CLK>; + clock-names = "core", "iface"; pinctrl-names = "default"; pinctrl-0 = <&blsp1_spi0_default>; #address-cells = <1>; @@ -942,9 +942,9 @@ compatible = "qcom,i2c-qup-v2.2.1"; reg = <0x078b6000 0x600>; interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&gcc GCC_BLSP1_AHB_CLK>, - <&gcc GCC_BLSP1_QUP1_I2C_APPS_CLK>; - clock-names = "iface", "core"; + clocks = <&gcc GCC_BLSP1_QUP1_I2C_APPS_CLK>, + <&gcc GCC_BLSP1_AHB_CLK>; + clock-names = "core", "iface"; pinctrl-names = "default"; pinctrl-0 = <&blsp1_i2c1_default>; #address-cells = <1>; @@ -956,9 +956,9 @@ compatible = "qcom,spi-qup-v2.2.1"; reg = <0x078b6000 0x600>; interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&gcc GCC_BLSP1_AHB_CLK>, - <&gcc GCC_BLSP1_QUP1_SPI_APPS_CLK>; - clock-names = "iface", "core"; + clocks = <&gcc GCC_BLSP1_QUP1_SPI_APPS_CLK>, + <&gcc GCC_BLSP1_AHB_CLK>; + clock-names = "core", "iface"; pinctrl-names = "default"; pinctrl-0 = <&blsp1_spi1_default>; #address-cells = <1>; @@ -970,9 +970,9 @@ compatible = "qcom,i2c-qup-v2.2.1"; reg = <0x078b7000 0x600>; interrupts = <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&gcc GCC_BLSP1_AHB_CLK>, - <&gcc GCC_BLSP1_QUP2_I2C_APPS_CLK>; - clock-names = "iface", "core"; + clocks = <&gcc GCC_BLSP1_QUP2_I2C_APPS_CLK>, + <&gcc GCC_BLSP1_AHB_CLK>; + clock-names = "core", "iface"; pinctrl-names = "default"; pinctrl-0 = <&blsp1_i2c2_default>; #address-cells = <1>; @@ -984,9 +984,9 @@ compatible = "qcom,spi-qup-v2.2.1"; reg = <0x078b7000 0x600>; interrupts = <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&gcc GCC_BLSP1_AHB_CLK>, - <&gcc GCC_BLSP1_QUP2_SPI_APPS_CLK>; - clock-names = "iface", "core"; + clocks = <&gcc GCC_BLSP1_QUP2_SPI_APPS_CLK>, + <&gcc GCC_BLSP1_AHB_CLK>; + clock-names = "core", "iface"; pinctrl-names = "default"; pinctrl-0 = <&blsp1_spi2_default>; #address-cells = <1>; @@ -998,9 +998,9 @@ compatible = "qcom,i2c-qup-v2.2.1"; reg = <0x078b8000 0x600>; interrupts = <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&gcc GCC_BLSP1_AHB_CLK>, - <&gcc GCC_BLSP1_QUP3_I2C_APPS_CLK>; - clock-names = "iface", "core"; + clocks = <&gcc GCC_BLSP1_QUP3_I2C_APPS_CLK>, + <&gcc GCC_BLSP1_AHB_CLK>; + clock-names = "core", "iface"; pinctrl-names = "default"; pinctrl-0 = <&blsp1_i2c3_default>; #address-cells = <1>; @@ -1012,9 +1012,9 @@ compatible = "qcom,spi-qup-v2.2.1"; reg = <0x078b8000 0x600>; interrupts = <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&gcc GCC_BLSP1_AHB_CLK>, - <&gcc GCC_BLSP1_QUP3_SPI_APPS_CLK>; - clock-names = "iface", "core"; + clocks = <&gcc GCC_BLSP1_QUP3_SPI_APPS_CLK>, + <&gcc GCC_BLSP1_AHB_CLK>; + clock-names = "core", "iface"; pinctrl-names = "default"; pinctrl-0 = <&blsp1_spi3_default>; #address-cells = <1>; @@ -1026,9 +1026,9 @@ compatible = "qcom,i2c-qup-v2.2.1"; reg = <0x078b9000 0x600>; interrupts = <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&gcc GCC_BLSP1_AHB_CLK>, - <&gcc GCC_BLSP1_QUP4_I2C_APPS_CLK>; - clock-names = "iface", "core"; + clocks = <&gcc GCC_BLSP1_QUP4_I2C_APPS_CLK>, + <&gcc GCC_BLSP1_AHB_CLK>; + clock-names = "core", "iface"; pinctrl-names = "default"; pinctrl-0 = <&blsp1_i2c4_default>; #address-cells = <1>; @@ -1040,9 +1040,9 @@ compatible = "qcom,spi-qup-v2.2.1"; reg = <0x078b9000 0x600>; interrupts = <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&gcc GCC_BLSP1_AHB_CLK>, - <&gcc GCC_BLSP1_QUP4_SPI_APPS_CLK>; - clock-names = "iface", "core"; + clocks = <&gcc GCC_BLSP1_QUP4_SPI_APPS_CLK>, + <&gcc GCC_BLSP1_AHB_CLK>; + clock-names = "core", "iface"; pinctrl-names = "default"; pinctrl-0 = <&blsp1_spi4_default>; #address-cells = <1>; @@ -1067,8 +1067,8 @@ interrupts = <GIC_SPI 297 IRQ_TYPE_LEVEL_HIGH>; clocks = <&gcc GCC_BLSP2_UART0_APPS_CLK>, <&gcc GCC_BLSP2_AHB_CLK>; clock-names = "core", "iface"; - dmas = <&blsp2_dma 1>, <&blsp2_dma 0>; - dma-names = "rx", "tx"; + dmas = <&blsp2_dma 0>, <&blsp2_dma 1>; + dma-names = "tx", "rx"; pinctrl-names = "default"; pinctrl-0 = <&blsp2_uart0_default>; status = "disabled"; @@ -1078,9 +1078,9 @@ compatible = "qcom,i2c-qup-v2.2.1"; reg = <0x07af5000 0x600>; interrupts = <GIC_SPI 299 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&gcc GCC_BLSP2_AHB_CLK>, - <&gcc GCC_BLSP2_QUP0_I2C_APPS_CLK>; - clock-names = "iface", "core"; + clocks = <&gcc GCC_BLSP2_QUP0_I2C_APPS_CLK>, + <&gcc GCC_BLSP2_AHB_CLK>; + clock-names = "core", "iface"; pinctrl-names = "default"; pinctrl-0 = <&blsp2_i2c0_default>; #address-cells = <1>; @@ -1092,9 +1092,9 @@ compatible = "qcom,spi-qup-v2.2.1"; reg = <0x07af5000 0x600>; interrupts = <GIC_SPI 299 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&gcc GCC_BLSP2_AHB_CLK>, - <&gcc GCC_BLSP2_QUP0_SPI_APPS_CLK>; - clock-names = "iface", "core"; + clocks = <&gcc GCC_BLSP2_QUP0_SPI_APPS_CLK>, + <&gcc GCC_BLSP2_AHB_CLK>; + clock-names = "core", "iface"; pinctrl-names = "default"; pinctrl-0 = <&blsp2_spi0_default>; #address-cells = <1>; diff --git a/arch/arm64/boot/dts/qcom/qrb5165-rb5.dts b/arch/arm64/boot/dts/qcom/qrb5165-rb5.dts index 845eb7a6bf92..0e63f707b911 100644 --- a/arch/arm64/boot/dts/qcom/qrb5165-rb5.dts +++ b/arch/arm64/boot/dts/qcom/qrb5165-rb5.dts @@ -29,7 +29,7 @@ }; /* Fixed crystal oscillator dedicated to MCP2518FD */ - clk40M: can_clock { + clk40M: can-clock { compatible = "fixed-clock"; #clock-cells = <0>; clock-frequency = <40000000>; diff --git a/arch/arm64/boot/dts/qcom/sa8155p-adp.dts b/arch/arm64/boot/dts/qcom/sa8155p-adp.dts index 8756c2b25c7e..ba547ca9fc6b 100644 --- a/arch/arm64/boot/dts/qcom/sa8155p-adp.dts +++ b/arch/arm64/boot/dts/qcom/sa8155p-adp.dts @@ -47,6 +47,29 @@ vin-supply = <&vreg_3p3>; }; + + mtl_rx_setup: rx-queues-config { + snps,rx-queues-to-use = <1>; + snps,rx-sched-sp; + + queue0 { + snps,dcb-algorithm; + snps,map-to-dma-channel = <0x0>; + snps,route-up; + snps,priority = <0x1>; + }; + }; + + mtl_tx_setup: tx-queues-config { + snps,tx-queues-to-use = <1>; + snps,tx-sched-wrr; + + queue0 { + snps,weight = <0x10>; + snps,dcb-algorithm; + snps,priority = <0x0>; + }; + }; }; &apps_rsc { @@ -303,6 +326,44 @@ }; }; +ðernet { + status = "okay"; + + snps,reset-gpio = <&tlmm 79 GPIO_ACTIVE_LOW>; + snps,reset-active-low; + snps,reset-delays-us = <0 11000 70000>; + + snps,ptp-ref-clk-rate = <250000000>; + snps,ptp-req-clk-rate = <96000000>; + + snps,mtl-rx-config = <&mtl_rx_setup>; + snps,mtl-tx-config = <&mtl_tx_setup>; + + pinctrl-names = "default"; + pinctrl-0 = <ðernet_defaults>; + + phy-handle = <&rgmii_phy>; + phy-mode = "rgmii"; + max-speed = <1000>; + + mdio { + #address-cells = <0x1>; + #size-cells = <0x0>; + + compatible = "snps,dwmac-mdio"; + + /* Micrel KSZ9031RNZ PHY */ + rgmii_phy: phy@7 { + reg = <0x7>; + + interrupt-parent = <&tlmm>; + interrupts-extended = <&tlmm 124 IRQ_TYPE_EDGE_FALLING>; /* phy intr */ + device_type = "ethernet-phy"; + compatible = "ethernet-phy-ieee802.3-c22"; + }; + }; +}; + &qupv3_id_1 { status = "okay"; }; @@ -317,6 +378,20 @@ firmware-name = "qcom/sa8155p/cdsp.mdt"; }; +&sdhc_2 { + status = "okay"; + + cd-gpios = <&tlmm 4 GPIO_ACTIVE_LOW>; + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&sdc2_on>; + pinctrl-1 = <&sdc2_off>; + vqmmc-supply = <&vreg_l13c_2p96>; /* IO line power */ + vmmc-supply = <&vreg_l17a_2p96>; /* Card power line */ + bus-width = <4>; + no-sdio; + no-emmc; +}; + &uart2 { status = "okay"; }; @@ -387,9 +462,78 @@ vdda-pll-supply = <&vdda_usb_ss_dp_core_1>; }; +&pcie0 { + status = "okay"; +}; + +&pcie0_phy { + status = "okay"; + vdda-phy-supply = <&vreg_l18c_0p88>; + vdda-pll-supply = <&vreg_l8c_1p2>; +}; + +&pcie1_phy { + vdda-phy-supply = <&vreg_l18c_0p88>; + vdda-pll-supply = <&vreg_l8c_1p2>; +}; + &tlmm { gpio-reserved-ranges = <0 4>; + sdc2_on: sdc2_on { + clk { + pins = "sdc2_clk"; + bias-disable; /* No pull */ + drive-strength = <16>; /* 16 MA */ + }; + + cmd { + pins = "sdc2_cmd"; + bias-pull-up; /* pull up */ + drive-strength = <16>; /* 16 MA */ + }; + + data { + pins = "sdc2_data"; + bias-pull-up; /* pull up */ + drive-strength = <16>; /* 16 MA */ + }; + + sd-cd { + pins = "gpio96"; + function = "gpio"; + bias-pull-up; /* pull up */ + drive-strength = <2>; /* 2 MA */ + }; + }; + + sdc2_off: sdc2_off { + clk { + pins = "sdc2_clk"; + bias-disable; /* No pull */ + drive-strength = <2>; /* 2 MA */ + }; + + cmd { + pins = "sdc2_cmd"; + bias-pull-up; /* pull up */ + drive-strength = <2>; /* 2 MA */ + }; + + data { + pins = "sdc2_data"; + bias-pull-up; /* pull up */ + drive-strength = <2>; /* 2 MA */ + }; + + sd-cd { + pins = "gpio96"; + function = "gpio"; + bias-pull-up; /* pull up */ + drive-strength = <2>; /* 2 MA */ + }; + }; + usb2phy_ac_en1_default: usb2phy_ac_en1_default { mux { pins = "gpio113"; @@ -407,4 +551,53 @@ drive-strength = <2>; }; }; + + ethernet_defaults: ethernet-defaults { + mdc { + pins = "gpio7"; + function = "rgmii"; + bias-pull-up; + }; + + mdio { + pins = "gpio59"; + function = "rgmii"; + bias-pull-up; + }; + + rgmii-rx { + pins = "gpio117", "gpio118", "gpio119", "gpio120", "gpio115", "gpio116"; + function = "rgmii"; + bias-disable; + drive-strength = <2>; + }; + + rgmii-tx { + pins = "gpio122", "gpio4", "gpio5", "gpio6", "gpio114", "gpio121"; + function = "rgmii"; + bias-pull-up; + drive-strength = <16>; + }; + + phy-intr { + pins = "gpio124"; + function = "emac_phy"; + bias-disable; + drive-strength = <8>; + }; + + pps { + pins = "gpio81"; + function = "emac_pps"; + bias-disable; + drive-strength = <8>; + }; + + phy-reset { + pins = "gpio79"; + function = "gpio"; + bias-pull-up; + drive-strength = <16>; + }; + }; }; diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor-coachz.dtsi b/arch/arm64/boot/dts/qcom/sc7180-trogdor-coachz.dtsi index c81805ef2250..8ac1f1e61006 100644 --- a/arch/arm64/boot/dts/qcom/sc7180-trogdor-coachz.dtsi +++ b/arch/arm64/boot/dts/qcom/sc7180-trogdor-coachz.dtsi @@ -5,15 +5,10 @@ * Copyright 2020 Google LLC. */ -#include "sc7180.dtsi" - -ap_ec_spi: &spi6 {}; -ap_h1_spi: &spi0 {}; - #include "sc7180-trogdor.dtsi" #include "sc7180-trogdor-ti-sn65dsi86.dtsi" -/* Deleted nodes from trogdor.dtsi */ +/* Deleted nodes from sc7180-trogdor.dtsi */ /delete-node/ &alc5682; /delete-node/ &pp3300_codec; @@ -111,10 +106,6 @@ ap_ts_pen_1v8: &i2c4 { }; }; -&i2c7 { - status = "disabled"; -}; - &i2c9 { status = "disabled"; }; diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor-homestar-r2.dts b/arch/arm64/boot/dts/qcom/sc7180-trogdor-homestar-r2.dts index 70032983fb65..d9e905ed4e62 100644 --- a/arch/arm64/boot/dts/qcom/sc7180-trogdor-homestar-r2.dts +++ b/arch/arm64/boot/dts/qcom/sc7180-trogdor-homestar-r2.dts @@ -7,7 +7,7 @@ /dts-v1/; -#include "sc7180.dtsi" +#include "sc7180-trogdor.dtsi" #include "sc7180-trogdor-ti-sn65dsi86.dtsi" #include "sc7180-trogdor-homestar.dtsi" diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor-homestar-r3.dts b/arch/arm64/boot/dts/qcom/sc7180-trogdor-homestar-r3.dts index e92e2e9e48ed..242c178fdc52 100644 --- a/arch/arm64/boot/dts/qcom/sc7180-trogdor-homestar-r3.dts +++ b/arch/arm64/boot/dts/qcom/sc7180-trogdor-homestar-r3.dts @@ -7,7 +7,7 @@ /dts-v1/; -#include "sc7180.dtsi" +#include "sc7180-trogdor.dtsi" #include "sc7180-trogdor-ti-sn65dsi86.dtsi" #include "sc7180-trogdor-homestar.dtsi" diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor-homestar-r4.dts b/arch/arm64/boot/dts/qcom/sc7180-trogdor-homestar-r4.dts index 0de0c97f5728..66dd87016201 100644 --- a/arch/arm64/boot/dts/qcom/sc7180-trogdor-homestar-r4.dts +++ b/arch/arm64/boot/dts/qcom/sc7180-trogdor-homestar-r4.dts @@ -7,7 +7,7 @@ /dts-v1/; -#include "sc7180.dtsi" +#include "sc7180-trogdor.dtsi" #include "sc7180-trogdor-parade-ps8640.dtsi" #include "sc7180-trogdor-homestar.dtsi" diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor-homestar.dtsi b/arch/arm64/boot/dts/qcom/sc7180-trogdor-homestar.dtsi index bff2b556cc75..9b3e3d13c165 100644 --- a/arch/arm64/boot/dts/qcom/sc7180-trogdor-homestar.dtsi +++ b/arch/arm64/boot/dts/qcom/sc7180-trogdor-homestar.dtsi @@ -5,9 +5,6 @@ * Copyright 2021 Google LLC. */ -ap_ec_spi: &spi6 {}; -ap_h1_spi: &spi0 {}; - #include "sc7180-trogdor.dtsi" / { @@ -88,10 +85,6 @@ ap_h1_spi: &spi0 {}; }; }; -&ap_tp_i2c { - status = "disabled"; -}; - ap_ts_pen_1v8: &i2c4 { status = "okay"; clock-frequency = <400000>; diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-limozeen-nots-r5.dts b/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-limozeen-nots-r5.dts index f360ff27226e..235cda2bba5e 100644 --- a/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-limozeen-nots-r5.dts +++ b/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-limozeen-nots-r5.dts @@ -7,7 +7,7 @@ /dts-v1/; -#include "sc7180.dtsi" +#include "sc7180-trogdor.dtsi" #include "sc7180-trogdor-ti-sn65dsi86.dtsi" #include "sc7180-trogdor-lazor.dtsi" #include "sc7180-trogdor-lte-sku.dtsi" diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-limozeen-nots-r9.dts b/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-limozeen-nots-r9.dts index 4e35aec6a1e5..913b5fc3ba76 100644 --- a/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-limozeen-nots-r9.dts +++ b/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-limozeen-nots-r9.dts @@ -7,7 +7,7 @@ /dts-v1/; -#include "sc7180.dtsi" +#include "sc7180-trogdor.dtsi" #include "sc7180-trogdor-parade-ps8640.dtsi" #include "sc7180-trogdor-lazor.dtsi" #include "sc7180-trogdor-lte-sku.dtsi" @@ -20,7 +20,7 @@ /delete-node/&ap_ts; &panel { - compatible = "innolux,n116bca-ea1", "innolux,n116bge"; + compatible = "edp-panel"; }; &sdhc_2 { diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-limozeen-r4.dts b/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-limozeen-r4.dts index 42b4bbcc76f4..d42dcd421146 100644 --- a/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-limozeen-r4.dts +++ b/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-limozeen-r4.dts @@ -7,7 +7,7 @@ /dts-v1/; -#include "sc7180.dtsi" +#include "sc7180-trogdor.dtsi" #include "sc7180-trogdor-ti-sn65dsi86.dtsi" #include "sc7180-trogdor-lazor.dtsi" #include "sc7180-trogdor-lte-sku.dtsi" diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-limozeen-r9.dts b/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-limozeen-r9.dts index dc47842bc662..15d77dc5f956 100644 --- a/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-limozeen-r9.dts +++ b/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-limozeen-r9.dts @@ -7,7 +7,7 @@ /dts-v1/; -#include "sc7180.dtsi" +#include "sc7180-trogdor.dtsi" #include "sc7180-trogdor-parade-ps8640.dtsi" #include "sc7180-trogdor-lazor.dtsi" #include "sc7180-trogdor-lte-sku.dtsi" diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-r0.dts b/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-r0.dts index b142006478ea..bfbf26fd2cd4 100644 --- a/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-r0.dts +++ b/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-r0.dts @@ -7,7 +7,7 @@ /dts-v1/; -#include "sc7180.dtsi" +#include "sc7180-trogdor.dtsi" #include "sc7180-trogdor-ti-sn65dsi86.dtsi" #include "sc7180-trogdor-lazor.dtsi" diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-r1-lte.dts b/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-r1-lte.dts index e16ba7b01f25..eb20157f6af9 100644 --- a/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-r1-lte.dts +++ b/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-r1-lte.dts @@ -13,10 +13,6 @@ compatible = "google,lazor-rev1-sku0", "google,lazor-rev2-sku0", "qcom,sc7180"; }; -&ap_sar_sensor { - status = "okay"; -}; - &ap_sar_sensor_i2c { status = "okay"; }; diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-r1.dts b/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-r1.dts index 59740799fa3a..d45a59afd7fc 100644 --- a/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-r1.dts +++ b/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-r1.dts @@ -7,7 +7,7 @@ /dts-v1/; -#include "sc7180.dtsi" +#include "sc7180-trogdor.dtsi" #include "sc7180-trogdor-ti-sn65dsi86.dtsi" #include "sc7180-trogdor-lazor.dtsi" diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-r3-kb.dts b/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-r3-kb.dts index 18ef9da71998..6ff81c1f7c44 100644 --- a/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-r3-kb.dts +++ b/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-r3-kb.dts @@ -7,7 +7,7 @@ /dts-v1/; -#include "sc7180.dtsi" +#include "sc7180-trogdor.dtsi" #include "sc7180-trogdor-ti-sn65dsi86.dtsi" #include "sc7180-trogdor-lazor.dtsi" #include "sc7180-lite.dtsi" diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-r3-lte.dts b/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-r3-lte.dts index c5c9feff41b8..e58e36e35950 100644 --- a/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-r3-lte.dts +++ b/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-r3-lte.dts @@ -7,7 +7,7 @@ /dts-v1/; -#include "sc7180.dtsi" +#include "sc7180-trogdor.dtsi" #include "sc7180-trogdor-ti-sn65dsi86.dtsi" #include "sc7180-trogdor-lazor.dtsi" #include "sc7180-trogdor-lte-sku.dtsi" @@ -20,10 +20,6 @@ "qcom,sc7180"; }; -&ap_sar_sensor { - status = "okay"; -}; - &ap_sar_sensor_i2c { status = "okay"; }; diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-r3.dts b/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-r3.dts index 7adcedbf080d..76c83f88cb41 100644 --- a/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-r3.dts +++ b/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-r3.dts @@ -7,7 +7,7 @@ /dts-v1/; -#include "sc7180.dtsi" +#include "sc7180-trogdor.dtsi" #include "sc7180-trogdor-ti-sn65dsi86.dtsi" #include "sc7180-trogdor-lazor.dtsi" #include "sc7180-lite.dtsi" diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-r9-kb.dts b/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-r9-kb.dts index 7f5c015e1ecb..960f7b7ce094 100644 --- a/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-r9-kb.dts +++ b/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-r9-kb.dts @@ -7,7 +7,7 @@ /dts-v1/; -#include "sc7180.dtsi" +#include "sc7180-trogdor.dtsi" #include "sc7180-trogdor-parade-ps8640.dtsi" #include "sc7180-trogdor-lazor.dtsi" #include "sc7180-lite.dtsi" diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-r9-lte.dts b/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-r9-lte.dts index 344b57c035d0..38027f13b9d0 100644 --- a/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-r9-lte.dts +++ b/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-r9-lte.dts @@ -7,7 +7,7 @@ /dts-v1/; -#include "sc7180.dtsi" +#include "sc7180-trogdor.dtsi" #include "sc7180-trogdor-parade-ps8640.dtsi" #include "sc7180-trogdor-lazor.dtsi" #include "sc7180-trogdor-lte-sku.dtsi" @@ -17,10 +17,6 @@ compatible = "google,lazor-sku0", "qcom,sc7180"; }; -&ap_sar_sensor { - status = "okay"; -}; - &ap_sar_sensor_i2c { status = "okay"; }; diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-r9.dts b/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-r9.dts index 83f6a4eb5ae5..56dd222650d3 100644 --- a/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-r9.dts +++ b/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-r9.dts @@ -7,7 +7,7 @@ /dts-v1/; -#include "sc7180.dtsi" +#include "sc7180-trogdor.dtsi" #include "sc7180-trogdor-parade-ps8640.dtsi" #include "sc7180-trogdor-lazor.dtsi" #include "sc7180-lite.dtsi" diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor.dtsi b/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor.dtsi index 69666f92176a..fe2369c29aad 100644 --- a/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor.dtsi +++ b/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor.dtsi @@ -5,9 +5,6 @@ * Copyright 2020 Google LLC. */ -ap_ec_spi: &spi6 {}; -ap_h1_spi: &spi0 {}; - #include "sc7180-trogdor.dtsi" &ap_sar_sensor { @@ -19,6 +16,10 @@ ap_h1_spi: &spi0 {}; semtech,avg-pos-strength = <64>; }; +&ap_tp_i2c { + status = "okay"; +}; + /* * Lazor is stuffed with a 47k NTC as charger thermistor which currently is * not supported by the PM6150 ADC driver. Disable the charger thermal zone diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor-pompom.dtsi b/arch/arm64/boot/dts/qcom/sc7180-trogdor-pompom.dtsi index e47c74e513af..3df4920295ad 100644 --- a/arch/arm64/boot/dts/qcom/sc7180-trogdor-pompom.dtsi +++ b/arch/arm64/boot/dts/qcom/sc7180-trogdor-pompom.dtsi @@ -5,11 +5,6 @@ * Copyright 2020 Google LLC. */ -#include "sc7180.dtsi" - -ap_ec_spi: &spi6 {}; -ap_h1_spi: &spi0 {}; - #include "sc7180-trogdor.dtsi" #include "sc7180-trogdor-ti-sn65dsi86.dtsi" @@ -36,6 +31,10 @@ ap_h1_spi: &spi0 {}; realtek,dmic-clk-driving-high; }; +&ap_tp_i2c { + status = "okay"; +}; + &cpu6_alert0 { temperature = <60000>; }; diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor-r1.dts b/arch/arm64/boot/dts/qcom/sc7180-trogdor-r1.dts index 457c25499863..352827e5740a 100644 --- a/arch/arm64/boot/dts/qcom/sc7180-trogdor-r1.dts +++ b/arch/arm64/boot/dts/qcom/sc7180-trogdor-r1.dts @@ -7,11 +7,6 @@ /dts-v1/; -#include "sc7180.dtsi" - -ap_ec_spi: &spi6 {}; -ap_h1_spi: &spi0 {}; - #include "sc7180-trogdor.dtsi" #include "sc7180-trogdor-ti-sn65dsi86.dtsi" @@ -20,6 +15,10 @@ ap_h1_spi: &spi0 {}; compatible = "google,trogdor", "qcom,sc7180"; }; +&ap_tp_i2c { + status = "okay"; +}; + ap_ts_pen_1v8: &i2c4 { status = "okay"; clock-frequency = <400000>; diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor.dtsi b/arch/arm64/boot/dts/qcom/sc7180-trogdor.dtsi index 732e1181af48..e55dbaa6dc12 100644 --- a/arch/arm64/boot/dts/qcom/sc7180-trogdor.dtsi +++ b/arch/arm64/boot/dts/qcom/sc7180-trogdor.dtsi @@ -11,7 +11,8 @@ #include <dt-bindings/regulator/qcom,rpmh-regulator.h> #include <dt-bindings/sound/sc7180-lpass.h> -/* PMICs depend on spmi_bus label and so must come after SoC */ +#include "sc7180.dtsi" +/* PMICs depend on spmi_bus label and so must come after sc7180.dtsi */ #include "pm6150.dtsi" #include "pm6150l.dtsi" @@ -626,7 +627,7 @@ }; }; -&ap_ec_spi { +ap_ec_spi: &spi6 { status = "okay"; cros_ec: ec@0 { compatible = "google,cros-ec-spi"; @@ -675,7 +676,7 @@ }; }; -&ap_h1_spi { +ap_h1_spi: &spi0 { status = "okay"; cr50: tpm@0 { compatible = "google,cr50"; @@ -722,13 +723,11 @@ ap_sar_sensor_i2c: &i2c5 { vdd-supply = <&pp3300_a>; svdd-supply = <&pp1800_prox>; - status = "disabled"; label = "proximity-wifi"; }; }; ap_tp_i2c: &i2c7 { - status = "okay"; clock-frequency = <400000>; trackpad: trackpad@15 { diff --git a/arch/arm64/boot/dts/qcom/sc7180.dtsi b/arch/arm64/boot/dts/qcom/sc7180.dtsi index e1c46b80f14a..82fa009e540f 100644 --- a/arch/arm64/boot/dts/qcom/sc7180.dtsi +++ b/arch/arm64/boot/dts/qcom/sc7180.dtsi @@ -1421,13 +1421,6 @@ qcom,bcm-voters = <&apps_bcm_voter>; }; - ipa_virt: interconnect@1e00000 { - compatible = "qcom,sc7180-ipa-virt"; - reg = <0 0x01e00000 0 0x1000>; - #interconnect-cells = <2>; - qcom,bcm-voters = <&apps_bcm_voter>; - }; - ipa: ipa@1e40000 { compatible = "qcom,sc7180-ipa"; @@ -3522,7 +3515,7 @@ }; }; - apps_bcm_voter: bcm_voter { + apps_bcm_voter: bcm-voter { compatible = "qcom,bcm-voter"; }; }; diff --git a/arch/arm64/boot/dts/qcom/sc7280-crd.dts b/arch/arm64/boot/dts/qcom/sc7280-crd-r3.dts index e2efbdde53a3..344338ad8a01 100644 --- a/arch/arm64/boot/dts/qcom/sc7280-crd.dts +++ b/arch/arm64/boot/dts/qcom/sc7280-crd-r3.dts @@ -11,8 +11,11 @@ #include "sc7280-idp-ec-h1.dtsi" / { - model = "Qualcomm Technologies, Inc. sc7280 CRD platform"; - compatible = "qcom,sc7280-crd", "google,hoglin", "qcom,sc7280"; + model = "Qualcomm Technologies, Inc. sc7280 CRD platform (rev3 - 4)"; + compatible = "qcom,sc7280-crd", + "google,hoglin-rev3", "google,hoglin-rev4", + "google,piglin-rev3", "google,piglin-rev4", + "qcom,sc7280"; aliases { serial0 = &uart5; diff --git a/arch/arm64/boot/dts/qcom/sc7280-herobrine-crd.dts b/arch/arm64/boot/dts/qcom/sc7280-herobrine-crd.dts new file mode 100644 index 000000000000..a4ac33c4fd59 --- /dev/null +++ b/arch/arm64/boot/dts/qcom/sc7280-herobrine-crd.dts @@ -0,0 +1,365 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * sc7280 CRD 3+ board device tree source + * + * Copyright 2022 Google LLC. + */ + +/dts-v1/; + +#include "sc7280-herobrine.dtsi" + +/ { + model = "Qualcomm Technologies, Inc. sc7280 CRD platform (rev5+)"; + compatible = "google,hoglin", "qcom,sc7280"; + + /* FIXED REGULATORS */ + + /* + * On most herobrine boards PPVAR_SYS directly provides VREG_EDP_BL. + * However, on CRD there's an extra regulator in the way. Since this + * is expected to be uncommon, we'll leave the "vreg_edp_bl" label + * in the baseboard herobrine.dtsi point at "ppvar_sys" and then + * make a "_crd" specific version here. + */ + vreg_edp_bl_crd: vreg-edp-bl-crd-regulator { + compatible = "regulator-fixed"; + regulator-name = "vreg_edp_bl_crd"; + + gpio = <&pm8350c_gpios 6 GPIO_ACTIVE_HIGH>; + enable-active-high; + pinctrl-names = "default"; + pinctrl-0 = <&edp_bl_reg_en>; + + vin-supply = <&ppvar_sys>; + }; +}; + +/* ADDITIONS TO NODES DEFINED IN PARENT DEVICE TREE FILES */ + +&apps_rsc { + pmg1110-regulators { + compatible = "qcom,pmg1110-rpmh-regulators"; + qcom,pmic-id = "k"; + + vreg_s1k_1p0: smps1 { + regulator-min-microvolt = <1010000>; + regulator-max-microvolt = <1170000>; + }; + }; +}; + +ap_tp_i2c: &i2c0 { + status = "okay"; + clock-frequency = <400000>; + + trackpad: trackpad@15 { + compatible = "hid-over-i2c"; + reg = <0x15>; + pinctrl-names = "default"; + pinctrl-0 = <&tp_int_odl>; + + interrupt-parent = <&tlmm>; + interrupts = <7 IRQ_TYPE_EDGE_FALLING>; + + post-power-on-delay-ms = <20>; + hid-descr-addr = <0x0001>; + vdd-supply = <&pp3300_z1>; + + wakeup-source; + }; +}; + +&ap_sar_sensor_i2c { + status = "okay"; +}; + +&ap_sar_sensor0 { + status = "okay"; +}; + +&ap_sar_sensor1 { + status = "okay"; +}; + +ap_ts_pen_1v8: &i2c13 { + status = "okay"; + clock-frequency = <400000>; + + ap_ts: touchscreen@5c { + compatible = "hid-over-i2c"; + reg = <0x5c>; + pinctrl-names = "default"; + pinctrl-0 = <&ts_int_conn>, <&ts_rst_conn>; + + interrupt-parent = <&tlmm>; + interrupts = <55 IRQ_TYPE_LEVEL_LOW>; + + post-power-on-delay-ms = <500>; + hid-descr-addr = <0x0000>; + + vdd-supply = <&pp3300_left_in_mlb>; + }; +}; + +&mdss_edp { + status = "okay"; +}; + +&mdss_edp_phy { + status = "okay"; +}; + +/* For nvme */ +&pcie1 { + status = "okay"; +}; + +/* For nvme */ +&pcie1_phy { + status = "okay"; +}; + +&pm8350c_pwm_backlight { + power-supply = <&vreg_edp_bl_crd>; +}; + +/* For eMMC */ +&sdhc_1 { + status = "okay"; +}; + +/* For SD Card */ +&sdhc_2 { + status = "okay"; +}; + +/* PINCTRL - BOARD-SPECIFIC */ + +/* + * Methodology for gpio-line-names: + * - If a pin goes to CRD board and is named it gets that name. + * - If a pin goes to CRD board and is not named, it gets no name. + * - If a pin is totally internal to Qcard then it gets Qcard name. + * - If a pin is not hooked up on Qcard, it gets no name. + */ + +&pm8350c_gpios { + gpio-line-names = "FLASH_STROBE_1", /* 1 */ + "AP_SUSPEND", + "PM8008_1_RST_N", + "", + "", + "EDP_BL_REG_EN", + "PMIC_EDP_BL_EN", + "PMIC_EDP_BL_PWM", + ""; + + edp_bl_reg_en: edp-bl-reg-en { + pins = "gpio6"; + function = "normal"; + bias-disable; + qcom,drive-strength = <PMIC_GPIO_STRENGTH_LOW>; + }; +}; + +&tlmm { + gpio-line-names = "AP_TP_I2C_SDA", /* 0 */ + "AP_TP_I2C_SCL", + "PCIE1_RESET_N", + "PCIE1_WAKE_N", + "APPS_I2C_SDA", + "APPS_I2C_SCL", + "", + "TPAD_INT_N", + "", + "", + + "GNSS_L1_EN", /* 10 */ + "GNSS_L5_EN", + "QSPI_DATA_0", + "QSPI_DATA_1", + "QSPI_CLK", + "QSPI_CS_N_1", + /* + * AP_FLASH_WP is crossystem ABI. Schematics call it + * BIOS_FLASH_WP_L (the '_L' suffix is misleading, the + * signal is active high). + */ + "AP_FLASH_WP", + "", + "AP_EC_INT_N", + "", + + "CAM0_RST_N", /* 20 */ + "CAM1_RST_N", + "SM_DBG_UART_TX", + "SM_DBG_UART_RX", + "", + "PM8008_IRQ_1", + "HOST2WLAN_SOL", + "WLAN2HOST_SOL", + "MOS_BT_UART_CTS", + "MOS_BT_UART_RFR", + + "MOS_BT_UART_TX", /* 30 */ + "MOS_BT_UART_RX", + "", + "HUB_RST", + "", + "", + "", + "", + "", + "", + + "EC_SPI_MISO_GPIO40", /* 40 */ + "EC_SPI_MOSI_GPIO41", + "EC_SPI_CLK_GPIO42", + "EC_SPI_CS_GPIO43", + "", + "EARLY_EUD_EN", + "", + "DP_HOT_PLUG_DETECT", + "AP_BRD_ID_0", + "AP_BRD_ID_1", + + "AP_BRD_ID_2", /* 50 */ + "NVME_PWR_REG_EN", + "TS_I2C_SDA_CONN", + "TS_I2C_CLK_CONN", + "TS_RST_CONN", + "TS_INT_CONN", + "AP_I2C_TPM_SDA", + "AP_I2C_TPM_SCL", + "", + "", + + "EDP_HOT_PLUG_DET_N", /* 60 */ + "", + "", + "AMP_EN", + "CAM0_MCLK_GPIO_64", + "CAM1_MCLK_GPIO_65", + "", + "", + "", + "CCI_I2C_SDA0", + + "CCI_I2C_SCL0", /* 70 */ + "", + "", + "", + "", + "", + "", + "", + "", + "PCIE1_CLK_REQ_N", + + "EN_PP3300_DX_EDP", /* 80 */ + "US_EURO_HS_SEL", + "FORCED_USB_BOOT", + "WCD_RESET_N", + "MOS_WLAN_EN", + "MOS_BT_EN", + "MOS_SW_CTRL", + "MOS_PCIE0_RST", + "MOS_PCIE0_CLKREQ_N", + "MOS_PCIE0_WAKE_N", + + "MOS_LAA_AS_EN", /* 90 */ + "SD_CARD_DET_CONN", + "", + "", + "MOS_BT_WLAN_SLIMBUS_CLK", + "MOS_BT_WLAN_SLIMBUS_DAT0", + "", + "", + "", + "", + + "", /* 100 */ + "", + "", + "", + "H1_AP_INT_N", + "", + "AMP_BCLK", + "AMP_DIN", + "AMP_LRCLK", + "UIM1_DATA_GPIO_109", + + "UIM1_CLK_GPIO_110", /* 110 */ + "UIM1_RESET_GPIO_111", + "", + "UIM1_DATA", + "UIM1_CLK", + "UIM1_RESET", + "UIM1_PRESENT", + "SDM_RFFE0_CLK", + "SDM_RFFE0_DATA", + "", + + "SDM_RFFE1_DATA", /* 120 */ + "SC_GPIO_121", + "FASTBOOT_SEL_1", + "SC_GPIO_123", + "FASTBOOT_SEL_2", + "SM_RFFE4_CLK_GRFC_8", + "SM_RFFE4_DATA_GRFC_9", + "WLAN_COEX_UART1_RX", + "WLAN_COEX_UART1_TX", + "", + + "", /* 130 */ + "", + "", + "SDR_QLINK_REQ", + "SDR_QLINK_EN", + "QLINK0_WMSS_RESET_N", + "SMR526_QLINK1_REQ", + "SMR526_QLINK1_EN", + "SMR526_QLINK1_WMSS_RESET_N", + "", + + "SAR1_INT_N", /* 140 */ + "SAR0_INT_N", + "", + "", + "WCD_SWR_TX_CLK", + "WCD_SWR_TX_DATA0", + "WCD_SWR_TX_DATA1", + "WCD_SWR_RX_CLK", + "WCD_SWR_RX_DATA0", + "WCD_SWR_RX_DATA1", + + "DMIC01_CLK", /* 150 */ + "DMIC01_DATA", + "DMIC23_CLK", + "DMIC23_DATA", + "", + "", + "EC_IN_RW_N", + "EN_PP3300_HUB", + "WCD_SWR_TX_DATA2", + "", + + "", /* 160 */ + "", + "", + "", + "", + "", + "", + "", + "", + "", + + "", /* 170 */ + "MOS_BLE_UART_TX", + "MOS_BLE_UART_RX", + "", + "", + ""; +}; diff --git a/arch/arm64/boot/dts/qcom/sc7280-herobrine-herobrine-r0.dts b/arch/arm64/boot/dts/qcom/sc7280-herobrine-herobrine-r0.dts deleted file mode 100644 index 1779d96c30f6..000000000000 --- a/arch/arm64/boot/dts/qcom/sc7280-herobrine-herobrine-r0.dts +++ /dev/null @@ -1,1352 +0,0 @@ -// SPDX-License-Identifier: (GPL-2.0+ OR MIT) -/* - * Google Herobrine board device tree source - * - * Copyright 2021 Google LLC. - */ - -/dts-v1/; - -#include <dt-bindings/iio/qcom,spmi-adc7-pmk8350.h> -#include <dt-bindings/iio/qcom,spmi-adc7-pmr735a.h> -#include <dt-bindings/input/gpio-keys.h> -#include <dt-bindings/input/input.h> -#include <dt-bindings/pinctrl/qcom,pmic-gpio.h> -#include <dt-bindings/regulator/qcom,rpmh-regulator.h> - -#include "sc7280.dtsi" - -/* PMICs depend on spmi_bus label and so must come after SoC */ -#include "pm7325.dtsi" -#include "pm8350c.dtsi" -#include "pmk8350.dtsi" - -#include "sc7280-chrome-common.dtsi" - -/ { - model = "Google Herobrine (rev0)"; - compatible = "google,herobrine-rev0", "qcom,sc7280"; -}; - -/ { - aliases { - serial0 = &uart5; - serial1 = &uart7; - }; - - chosen { - stdout-path = "serial0:115200n8"; - }; - - /* FIXED REGULATORS - parents above children */ - - /* This is the top level supply and variable voltage */ - ppvar_sys: ppvar-sys-regulator { - compatible = "regulator-fixed"; - regulator-name = "ppvar_sys"; - regulator-always-on; - regulator-boot-on; - }; - - /* This divides ppvar_sys by 2, so voltage is variable */ - src_vph_pwr: src-vph-pwr-regulator { - compatible = "regulator-fixed"; - regulator-name = "src_vph_pwr"; - - /* EC turns on with switchcap_on; always on for AP */ - regulator-always-on; - regulator-boot-on; - - vin-supply = <&ppvar_sys>; - }; - - pp5000_s3: pp5000-s3-regulator { - compatible = "regulator-fixed"; - regulator-name = "pp5000_s3"; - - /* EC turns on with en_pp5000_s3; always on for AP */ - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - - vin-supply = <&ppvar_sys>; - }; - - pp3300_z1: pp3300-z1-regulator { - compatible = "regulator-fixed"; - regulator-name = "pp3300_z1"; - - /* EC turns on with en_pp3300_z1; always on for AP */ - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - - vin-supply = <&ppvar_sys>; - }; - - pp3300_audio: - pp3300_codec: pp3300-codec-regulator { - compatible = "regulator-fixed"; - regulator-name = "pp3300_codec"; - - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - - gpio = <&tlmm 67 GPIO_ACTIVE_HIGH>; - enable-active-high; - pinctrl-names = "default"; - pinctrl-0 = <&en_pp3300_codec>; - - vin-supply = <&pp3300_z1>; - }; - - pp3300_cam: - pp3300_edp: - pp3300_ts: pp3300-edp-regulator { - compatible = "regulator-fixed"; - regulator-name = "pp3300_edp"; - - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - - gpio = <&tlmm 80 GPIO_ACTIVE_HIGH>; - enable-active-high; - pinctrl-names = "default"; - pinctrl-0 = <&en_pp3300_dx_edp>; - - vin-supply = <&pp3300_z1>; - }; - - pp3300_fp: - pp3300_fp_ls: - pp3300_mcu: pp3300-fp-regulator { - compatible = "regulator-fixed"; - regulator-name = "pp3300_fp"; - - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - - regulator-boot-on; - regulator-always-on; - - /* - * WARNING: it is intentional that GPIO 42 isn't listed here. - * The userspace script for updating the fingerprint firmware - * needs to control the FP regulators during a FW update, - * hence the signal can't be owned by the kernel regulator. - */ - - pinctrl-names = "default"; - pinctrl-0 = <&en_fp_rails>; - - vin-supply = <&pp3300_z1>; - }; - - pp3300_hub: pp3300-hub-regulator { - compatible = "regulator-fixed"; - regulator-name = "pp3300_hub"; - - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - - regulator-boot-on; - regulator-always-on; - - gpio = <&tlmm 24 GPIO_ACTIVE_HIGH>; - enable-active-high; - pinctrl-names = "default"; - pinctrl-0 = <&en_pp3300_hub>; - - vin-supply = <&pp3300_z1>; - }; - - pp3300_tp: pp3300-tp-regulator { - compatible = "regulator-fixed"; - regulator-name = "pp3300_tp"; - - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - - /* AP turns on with PP1800_L18B_S0; always on for AP */ - regulator-always-on; - regulator-boot-on; - - vin-supply = <&pp3300_z1>; - }; - - pp2850_uf_cam: pp2850-uf-cam-regulator { - compatible = "regulator-fixed"; - regulator-name = "pp2850_uf_cam"; - - regulator-min-microvolt = <2850000>; - regulator-max-microvolt = <2850000>; - - gpio = <&tlmm 6 GPIO_ACTIVE_HIGH>; - enable-active-high; - pinctrl-names = "default"; - pinctrl-0 = <&uf_cam_en>; - - vin-supply = <&pp3300_cam>; - }; - - pp2850_vcm_wf_cam: pp2850-vcm-wf-cam-regulator { - compatible = "regulator-fixed"; - regulator-name = "pp2850_vcm_wf_cam"; - - regulator-min-microvolt = <2850000>; - regulator-max-microvolt = <2850000>; - - gpio = <&tlmm 7 GPIO_ACTIVE_HIGH>; - enable-active-high; - pinctrl-names = "default"; - pinctrl-0 = <&wf_cam_en>; - - vin-supply = <&pp3300_cam>; - }; - - pp2850_wf_cam: pp2850-wf-cam-regulator { - compatible = "regulator-fixed"; - regulator-name = "pp2850_wf_cam"; - - regulator-min-microvolt = <2850000>; - regulator-max-microvolt = <2850000>; - - gpio = <&tlmm 7 GPIO_ACTIVE_HIGH>; - enable-active-high; - /* - * The pinconf can only be referenced once so we put it on the - * first regulator and comment it out here. - * - * pinctrl-names = "default"; - * pinctrl-0 = <&wf_cam_en>; - */ - - vin-supply = <&pp3300_cam>; - }; - - pp1800_fp: pp1800-fp-regulator { - compatible = "regulator-fixed"; - regulator-name = "pp1800_fp"; - - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - - regulator-boot-on; - regulator-always-on; - - /* - * WARNING: it is intentional that GPIO 42 isn't listed here. - * The userspace script for updating the fingerprint firmware - * needs to control the FP regulators during a FW update, - * hence the signal can't be owned by the kernel regulator. - */ - - pinctrl-names = "default"; - pinctrl-0 = <&en_fp_rails>; - - vin-supply = <&pp1800_l18b_s0>; - status = "disabled"; - }; - - pp1800_uf_cam: pp1800-uf-cam-regulator { - compatible = "regulator-fixed"; - regulator-name = "pp1800_uf_cam"; - - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - - gpio = <&tlmm 6 GPIO_ACTIVE_HIGH>; - enable-active-high; - /* - * The pinconf can only be referenced once so we put it on the - * first regulator and comment it out here. - * - * pinctrl-names = "default"; - * pinctrl-0 = <&uf_cam_en>; - */ - - vin-supply = <&pp1800_l19b>; - }; - - pp1800_wf_cam: pp1800-wf-cam-regulator { - compatible = "regulator-fixed"; - regulator-name = "pp1800_wf_cam"; - - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - - gpio = <&tlmm 7 GPIO_ACTIVE_HIGH>; - enable-active-high; - /* - * The pinconf can only be referenced once so we put it on the - * first regulator and comment it out here. - * - * pinctrl-names = "default"; - * pinctrl-0 = <&wf_cam_en>; - */ - - vin-supply = <&pp1800_l19b>; - }; - - pp1200_wf_cam: pp1200-wf-cam-regulator { - compatible = "regulator-fixed"; - regulator-name = "pp1200_wf_cam"; - - regulator-min-microvolt = <1200000>; - regulator-max-microvolt = <1200000>; - - gpio = <&tlmm 7 GPIO_ACTIVE_HIGH>; - enable-active-high; - /* - * The pinconf can only be referenced once so we put it on the - * first regulator and comment it out here. - * - * pinctrl-names = "default"; - * pinctrl-0 = <&wf_cam_en>; - */ - - vin-supply = <&pp1200_l6b>; - }; - - /* BOARD-SPECIFIC TOP LEVEL NODES */ - - gpio_keys: gpio-keys { - compatible = "gpio-keys"; - status = "disabled"; - pinctrl-names = "default"; - pinctrl-0 = <&pen_pdct_l>; - - pen_insert: pen-insert { - label = "Pen Insert"; - - /* Insert = low, eject = high */ - gpios = <&tlmm 39 GPIO_ACTIVE_LOW>; - linux,code = <SW_PEN_INSERTED>; - linux,input-type = <EV_SW>; - wakeup-event-action = <EV_ACT_DEASSERTED>; - wakeup-source; - }; - }; - - pwmleds { - compatible = "pwm-leds"; - status = "disabled"; - keyboard_backlight: keyboard-backlight { - status = "disabled"; - label = "cros_ec::kbd_backlight"; - pwms = <&cros_ec_pwm 0>; - max-brightness = <1023>; - }; - }; -}; - -&apps_rsc { - pm7325-regulators { - compatible = "qcom,pm7325-rpmh-regulators"; - qcom,pmic-id = "b"; - - vdd19_pmu_pcie_i: - vdd19_pmu_rfa_i: - vreg_s1b_wlan: - vreg_s1b: smps1 { - regulator-min-microvolt = <1856000>; - regulator-max-microvolt = <2040000>; - }; - - vdd_pmu_aon_i: - vreg_s7b_wlan: - vreg_s7b: smps7 { - regulator-min-microvolt = <535000>; - regulator-max-microvolt = <1120000>; - }; - - vdd13_pmu_pcie_i: - vdd13_pmu_rfa_i: - vreg_s8b_wlan: - vreg_s8b: smps8 { - regulator-min-microvolt = <1256000>; - regulator-max-microvolt = <1500000>; - }; - - vdda_usb_ss_dp_core: - vreg_l1b: ldo1 { - regulator-min-microvolt = <825000>; - regulator-max-microvolt = <925000>; - regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; - }; - - vdda_usb_hs0_3p1: - vreg_l2b: ldo2 { - regulator-min-microvolt = <2700000>; - regulator-max-microvolt = <3544000>; - regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; - }; - - pp1200_l6b: - vdd_ufs_1p2: - vdd_vref: - vdda_csi01_1p2: - vdda_csi23_1p2: - vdda_csi4_1p2: - vdda_dsi0_1p2: - vdda_pcie0_1p2: - vdda_pcie1_1p2: - vdda_usb_ss_dp_1p2: - vdda_qlink0_1p2_ck: - vdda_qlink1_1p2_ck: - vreg_l6b_1p2: - vreg_l6b: ldo6 { - regulator-min-microvolt = <1120000>; - regulator-max-microvolt = <1408000>; - regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; - }; - - pp2950_l7b: - vreg_l7b: ldo7 { - regulator-min-microvolt = <2960000>; - regulator-max-microvolt = <2960000>; - regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; - }; - - codec_vcc: - pp1800_l18b_s0: - pp1800_ts: - vdd1: - vddpx_0: - vddpx_3: - vddpx_7: - vreg_l18b: ldo18 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <2000000>; - regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; - }; - - pp1800_l19b: - vddpx_ts: - vddpx_wl4otp: - vreg_l19b: ldo19 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; - }; - }; - - pm8350c-regulators { - compatible = "qcom,pm8350c-rpmh-regulators"; - qcom,pmic-id = "c"; - - vreg_s1c: smps1 { - regulator-min-microvolt = <2190000>; - regulator-max-microvolt = <2210000>; - }; - - vddpx_1: - vreg_s9c: smps9 { - regulator-min-microvolt = <1010000>; - regulator-max-microvolt = <1170000>; - }; - - pp1800_l1c: - pp1800_pen: - vdd_a_gfx_cs_1p1: - vdd_a_cxo_1p8: - vdd_qfprom: - vdda_apc_cs_1p8: - vdda_qrefs_1p8: - vdda_turing_q6_cs_1p8: - vdda_usb_hs0_1p8: - vreg_l1c: ldo1 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1980000>; - regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; - }; - - dmic_vdd: - pp1800_alc5682: - pp1800_l2c: - pp1800_vreg_alc5682: - vreg_l2c: ldo2 { - regulator-min-microvolt = <1620000>; - regulator-max-microvolt = <1980000>; - regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; - }; - - pp3300_sar: - pp3300_sensor: - vreg_l3c: ldo3 { - regulator-min-microvolt = <2800000>; - regulator-max-microvolt = <3540000>; - regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; - }; - - ppvar_uim1: - vddpx_5: - vreg_l4c: ldo4 { - regulator-min-microvolt = <1620000>; - regulator-max-microvolt = <3300000>; - regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; - }; - - pp2950_l5c: - uim_vcc: - vddpx_6: - vreg_l5c: ldo5 { - regulator-min-microvolt = <1620000>; - regulator-max-microvolt = <3300000>; - regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; - }; - - ppvar_l6c: - vddpx_2: - vreg_l6c: ldo6 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <2950000>; - regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; - }; - - vreg_l7c: ldo7 { - regulator-min-microvolt = <3000000>; - regulator-max-microvolt = <3544000>; - regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; - }; - - pp1800_prox: - pp1800_sar: - vreg_l8c: ldo8 { - regulator-min-microvolt = <1620000>; - regulator-max-microvolt = <2000000>; - regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; - }; - - pp2950_l9c: - vreg_l9c: ldo9 { - regulator-min-microvolt = <2960000>; - regulator-max-microvolt = <2960000>; - regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; - }; - - vdd_a_gnss_0p9: - vdd_ufs_core: - vdd_usb_hs0_core: - vdd_vref_0p9: - vdda_csi01_0p9: - vdda_csi23_0p9: - vdda_csi4_0p9: - vdda_dsi0_pll_0p9: - vdda_dsi0_0p9: - vdda_pcie0_core: - vdda_pcie1_core: - vdda_qlink0_0p9: - vdda_qlink1_0p9: - vdda_qlink0_0p9_ck: - vdda_qlink1_0p9_ck: - vdda_qrefs_0p875: - vreg_l10c_0p8: - vreg_l10c: ldo10 { - regulator-min-microvolt = <720000>; - regulator-max-microvolt = <1050000>; - regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; - }; - - pp2800_l11c: - vreg_l11c: ldo11 { - regulator-min-microvolt = <2800000>; - regulator-max-microvolt = <3544000>; - regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; - }; - - pp1800_l12c: - vreg_l12c: ldo12 { - regulator-min-microvolt = <1650000>; - regulator-max-microvolt = <2000000>; - regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; - }; - - pp3300_l13c: - vreg_l13c: ldo13 { - regulator-min-microvolt = <2700000>; - regulator-max-microvolt = <3544000>; - regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; - }; - - vreg_bob: bob { - regulator-min-microvolt = <3008000>; - regulator-max-microvolt = <3960000>; - regulator-initial-mode = <RPMH_REGULATOR_MODE_AUTO>; - }; - }; -}; - -ap_tp_i2c: &i2c1 { - status = "okay"; - clock-frequency = <400000>; - - trackpad: trackpad@15 { - compatible = "elan,ekth3000"; - reg = <0x15>; - pinctrl-names = "default"; - pinctrl-0 = <&tp_int_odl>; - - interrupt-parent = <&tlmm>; - interrupts = <102 IRQ_TYPE_EDGE_FALLING>; - - vcc-supply = <&pp3300_z1>; - - wakeup-source; - }; -}; - -ap_h1_i2c: &i2c12 { - status = "okay"; - clock-frequency = <400000>; - - tpm@50 { - compatible = "google,cr50"; - reg = <0x50>; - - pinctrl-names = "default"; - pinctrl-0 = <&h1_ap_int_odl>; - - interrupt-parent = <&tlmm>; - interrupts = <54 IRQ_TYPE_EDGE_RISING>; - }; -}; - -ap_ts_pen: &i2c13 { - status = "okay"; - clock-frequency = <400000>; - - ap_ts: touchscreen@10 { - compatible = "hid-over-i2c"; - reg = <0x10>; - pinctrl-names = "default"; - pinctrl-0 = <&ts_int_l>, <&ts_reset_l>; - - interrupt-parent = <&tlmm>; - interrupts = <81 IRQ_TYPE_LEVEL_LOW>; - - post-power-on-delay-ms = <20>; - hid-descr-addr = <0x0001>; - - vdd-supply = <&pp3300_ts>; - }; -}; - -&pm7325_gpios { - status = "disabled"; /* No GPIOs are connected */ -}; - -&pmk8350_gpios { - status = "disabled"; /* No GPIOs are connected */ -}; - -&pmk8350_rtc { - status = "disabled"; -}; - -&pmk8350_vadc { - pmk8350_die_temp { - reg = <PMK8350_ADC7_DIE_TEMP>; - label = "pmk8350_die_temp"; - qcom,pre-scaling = <1 1>; - }; - - pmr735a_die_temp { - reg = <PMR735A_ADC7_DIE_TEMP>; - label = "pmr735a_die_temp"; - qcom,pre-scaling = <1 1>; - }; -}; - -&qfprom { - vcc-supply = <&vdd_qfprom>; -}; - -&qupv3_id_0 { - status = "okay"; -}; - -&qupv3_id_1 { - status = "okay"; -}; - -&sdhc_1 { - status = "okay"; - - vmmc-supply = <&pp2950_l7b>; - vqmmc-supply = <&pp1800_l19b>; -}; - -&sdhc_2 { - status = "okay"; - - pinctrl-0 = <&sdc2_clk>, <&sdc2_cmd>, <&sdc2_data>, <&sd_cd>; - pinctrl-1 = <&sdc2_clk_sleep>, <&sdc2_cmd_sleep>, <&sdc2_data_sleep>, <&sd_cd>; - vmmc-supply = <&pp2950_l9c>; - vqmmc-supply = <&ppvar_l6c>; - - cd-gpios = <&tlmm 91 GPIO_ACTIVE_LOW>; -}; - -ap_ec_spi: &spi8 { - status = "okay"; - - pinctrl-0 = <&qup_spi8_data_clk>, <&qup_spi8_cs_gpio_init_high>, <&qup_spi8_cs_gpio>; - cs-gpios = <&tlmm 35 GPIO_ACTIVE_LOW>; - - cros_ec: ec@0 { - compatible = "google,cros-ec-spi"; - reg = <0>; - interrupt-parent = <&tlmm>; - interrupts = <142 IRQ_TYPE_LEVEL_LOW>; - pinctrl-names = "default"; - pinctrl-0 = <&ap_ec_int_l>; - spi-max-frequency = <3000000>; - - cros_ec_pwm: pwm { - compatible = "google,cros-ec-pwm"; - #pwm-cells = <1>; - }; - - i2c_tunnel: i2c-tunnel { - compatible = "google,cros-ec-i2c-tunnel"; - google,remote-bus = <0>; - #address-cells = <1>; - #size-cells = <0>; - }; - - typec { - compatible = "google,cros-ec-typec"; - #address-cells = <1>; - #size-cells = <0>; - - usb_c0: connector@0 { - compatible = "usb-c-connector"; - reg = <0>; - label = "left"; - power-role = "dual"; - data-role = "host"; - try-power-role = "source"; - }; - - usb_c1: connector@1 { - compatible = "usb-c-connector"; - reg = <1>; - label = "right"; - power-role = "dual"; - data-role = "host"; - try-power-role = "source"; - }; - }; - }; -}; - -#include <arm/cros-ec-keyboard.dtsi> -#include <arm/cros-ec-sbs.dtsi> - -&keyboard_controller { - function-row-physmap = < - MATRIX_KEY(0x00, 0x02, 0) /* T1 */ - MATRIX_KEY(0x03, 0x02, 0) /* T2 */ - MATRIX_KEY(0x02, 0x02, 0) /* T3 */ - MATRIX_KEY(0x01, 0x02, 0) /* T4 */ - MATRIX_KEY(0x03, 0x04, 0) /* T5 */ - MATRIX_KEY(0x02, 0x04, 0) /* T6 */ - MATRIX_KEY(0x01, 0x04, 0) /* T7 */ - MATRIX_KEY(0x02, 0x09, 0) /* T8 */ - MATRIX_KEY(0x01, 0x09, 0) /* T9 */ - MATRIX_KEY(0x00, 0x04, 0) /* T10 */ - >; - linux,keymap = < - MATRIX_KEY(0x00, 0x02, KEY_BACK) - MATRIX_KEY(0x03, 0x02, KEY_REFRESH) - MATRIX_KEY(0x02, 0x02, KEY_ZOOM) - MATRIX_KEY(0x01, 0x02, KEY_SCALE) - MATRIX_KEY(0x03, 0x04, KEY_SYSRQ) - MATRIX_KEY(0x02, 0x04, KEY_BRIGHTNESSDOWN) - MATRIX_KEY(0x01, 0x04, KEY_BRIGHTNESSUP) - MATRIX_KEY(0x02, 0x09, KEY_MUTE) - MATRIX_KEY(0x01, 0x09, KEY_VOLUMEDOWN) - MATRIX_KEY(0x00, 0x04, KEY_VOLUMEUP) - - CROS_STD_MAIN_KEYMAP - >; -}; - -&uart5 { - compatible = "qcom,geni-debug-uart"; - status = "okay"; -}; - -&uart7 { - status = "okay"; -}; - -&usb_1 { - status = "okay"; -}; - -&usb_1_dwc3 { - dr_mode = "host"; -}; - -&usb_1_hsphy { - status = "okay"; - - vdda-pll-supply = <&vdd_usb_hs0_core>; - vdda33-supply = <&vdda_usb_hs0_3p1>; - vdda18-supply = <&vdda_usb_hs0_1p8>; -}; - -&usb_1_qmpphy { - status = "okay"; - - vdda-phy-supply = <&vdda_usb_ss_dp_1p2>; - vdda-pll-supply = <&vdda_usb_ss_dp_core>; -}; - -&usb_2 { - status = "okay"; -}; - -&usb_2_dwc3 { - dr_mode = "host"; -}; - -&usb_2_hsphy { - status = "okay"; - - vdda-pll-supply = <&vdd_usb_hs0_core>; - vdda33-supply = <&vdda_usb_hs0_3p1>; - vdda18-supply = <&vdda_usb_hs0_1p8>; -}; - -/* PINCTRL - additions to nodes defined in sc7280.dtsi */ - -&dp_hot_plug_det { - bias-disable; -}; - -&pcie1_clkreq_n { - bias-pull-up; - drive-strength = <2>; -}; - -&qspi_cs0 { - bias-disable; -}; - -&qspi_clk { - bias-disable; -}; - -&qspi_data01 { - /* High-Z when no transfers; nice to park the lines */ - bias-pull-up; -}; - -&qup_uart5_rx { - drive-strength = <2>; - bias-pull-up; -}; - -&qup_uart5_tx { - drive-strength = <2>; - bias-disable; -}; - -&qup_uart7_cts { - /* - * Configure a pull-down on CTS to match the pull of - * the Bluetooth module. - */ - bias-pull-down; -}; - -&qup_uart7_rts { - /* We'll drive RTS, so no pull */ - drive-strength = <2>; - bias-disable; -}; - -&qup_uart7_tx { - /* We'll drive TX, so no pull */ - drive-strength = <2>; - bias-disable; -}; - -&qup_uart7_rx { - /* - * Configure a pull-up on RX. This is needed to avoid - * garbage data when the TX pin of the Bluetooth module is - * in tri-state (module powered off or not driving the - * signal yet). - */ - bias-pull-up; -}; - -&sdc1_clk { - bias-disable; - drive-strength = <16>; -}; - -&sdc1_cmd { - bias-pull-up; - drive-strength = <10>; -}; - -&sdc1_data { - bias-pull-up; - drive-strength = <10>; -}; - -&sdc1_rclk { - bias-pull-down; -}; - -&sdc2_clk { - bias-disable; - drive-strength = <16>; -}; - -&sdc2_cmd { - bias-pull-up; - drive-strength = <10>; -}; - -&sdc2_data { - bias-pull-up; - drive-strength = <10>; -}; - -/* PINCTRL - board-specific pinctrl */ - -&pm8350c_gpios { - gpio-line-names = "AP_SUSPEND", - "", - "", - "AP_BL_EN", - "", - "SD_CD_ODL", - "", - "", - "AP_BL_PWM"; - - ap_bl_en: ap-bl-en { - pins = "gpio4"; - function = "normal"; - qcom,drive-strength = <PMIC_GPIO_STRENGTH_LOW>; - bias-disable; - - /* Force backlight to be disabled to match state at boot. */ - output-low; - }; -}; - -&tlmm { - gpio-line-names = "HP_I2C_SDA", /* 0 */ - "HP_I2C_SCL", - "SSD_RST_L", - "PE_WAKE_ODL", - "AP_TP_I2C_SDA", - "AP_TP_I2C_SCL", - "UF_CAM_EN", - "WF_CAM_EN", - "AP_SAR_SENSOR_SDA", - "AP_SAR_SENSOR_SCL", - - "", /* 10 */ - "", - "AP_SPI_MOSI", - "AP_SPI_MISO", - "AP_SPI_CLK", - "AP_SPI_CS0_L", - "", - "", - "EDP_HPD", - "", - - "UF_CAM_RST_L", /* 20 */ - "WF_CAM_RST_L", - "UART_AP_TX_DBG_RX", - "UART_DBG_TX_AP_RX", - "EN_PP3300_HUB", - "", - "HOST2WLAN_SOL", - "WLAN2HOST_SOL", - "BT_UART_CTS", - "BT_UART_RTS", - - "BT_UART_TXD", /* 30 */ - "BT_UART_RXD", - "AP_EC_SPI_MISO", - "AP_EC_SPI_MOSI", - "AP_EC_SPI_CLK", - "AP_EC_SPI_CS_L", - "", - "", - "", - "PEN_PDCT_L", - - "IO_BRD_ID0", /* 40 */ - "IO_BRD_ID1", - "EN_FP_RAILS", - "PEN_IRQ_L", - "AP_SPI_FP_MISO", - "AP_SPI_FP_MOSI", - "AP_SPI_FP_CLK", - "AP_SPI_FP_CS_L", - "AP_H1_SPI_MISO", - "AP_H1_SPI_MOSI", - - "AP_H1_SPI_CLK", /* 50 */ - "AP_H1_SPI_CS_L", - "AP_TS_PEN_I2C_SDA", - "AP_TS_PEN_I2C_SCL", - "H1_AP_INT_ODL", - "", - "LCM_RST_1V8_L", - "AMP_EN", - "", - "DP_HOT_PLUG_DET", - - "HUB_RST_L", /* 60 */ - "FP_TO_AP_IRQ_L", - "", - "", - "UF_CAM_MCLK", - "WF_CAM_MCLK", - "IO_BRD_ID2", - "EN_PP3300_CODEC", - "EC_IN_RW_ODL", - "UF_CAM_SDA", - - "UF_CAM_SCL", /* 70 */ - "WF_CAM_SDA", - "WF_CAM_SCL", - "AP_BRD_ID0", - "AP_BRD_ID1", - "AP_BRD_ID2", - "", - "FPMCU_BOOT0", - "FP_RST_L", - "PE_CLKREQ_ODL", - - "EN_EDP_PP3300", /* 80 */ - "TS_INT_L", - "FORCE_USB_BOOT", - "WCD_RST_L", - "WLAN_EN", - "BT_EN", - "WLAN_SW_CTRL", - "PCIE0_RESET_L", - "PCIE0_CLK_REQ_L", - "PCIE0_WAKE_L", - - "AS_EN", /* 90 */ - "SD_CD_ODL", - "", - /* - * AP_FLASH_WP_L is crossystem ABI. Schematics - * call it BIOS_FLASH_WP_L. - */ - "AP_FLASH_WP_L", - "BT_WLAN_SB_CLK", - "BT_WLAN_SB_DATA", - "HP_MCLK", - "HP_BCLK", - "HP_DOUT", - "HP_DIN", - - "HP_LRCLK", /* 100 */ - "HP_IRQ", - "TP_INT_ODL", - "", - "IO_SKU_ID2", - "TS_RESET_L", - "AMP_BCLK", - "AMP_DIN", - "AMP_LRCLK", - "UIM2_DATA", - - "UIM2_CLK", /* 110 */ - "UIM2_RST", - "UIM2_PRESENT", - "UIM1_DATA", - "UIM1_CLK", - "UIM1_RST", - "", - "RFFE0_CLK", - "RFFE0_DATA/BOOT_CONFIG_0", - "RFFE1_CLK", - - "RFFE1_DATA/BOOT_CONFIG_1", /* 120 */ - "RFFE2_CLK", - "RFFE2_DATA/BOOT_CONFIG_2", - "RFFE3_CLK", - "RFFE3_DATA/BOOT_CONFIG_3", - "RFFE4_CLK", - "RFFE4_DATA", - "WCI2_LTE_COEX_RXD", - "WCI2_LTE_COEX_TXD", - "IO_SKU_ID0", - - "IO_SKU_ID1", /* 130 */ - "", - "", - "QLINK0_REQ", - "QLINK0_EN", - "QLINK0_WMSS_RESET_L", - "QLINK1_REQ", - "QLINK1_EN", - "QLINK1_WMSS_RESET_L", - "FORCED_USB_BOOT_POL", - - "", /* 140 */ - "P_SENSOR_INT_L", - "AP_EC_INT_L", - "", - "WCD_SWR_TX_CLK", - "WCD_SWR_TX_DATA_0", - "WCD_SWR_TX_DATA_1", - "WCD_SWR_RX_CLK", - "WCD_SWR_RX_DATA_0", - "WCD_SWR_RX_DATA_1", - - "", /* 150 */ - "", - "", - "", - "", - "", - "", - "", - "WCD_SWR_TX_DATA_2", - "", - - "", /* 160 */ - "", - "", - "", - "", - "", - "", - "", - "", - "", - - "", /* 170 */ - "SENS_UART_TXD", - "SENS_UART_RXD", - "", - "", - ""; - - /* - * pinctrl settings for pins that have no real owners. - */ - pinctrl-names = "default"; - pinctrl-0 = <&bios_flash_wp_l>; - - amp_en: amp-en { - pins = "gpio57"; - function = "gpio"; - bias-pull-down; - }; - - ap_ec_int_l: ap-ec-int-l { - pins = "gpio142"; - input-enable; - bias-pull-up; - }; - - bios_flash_wp_l: bios-flash-wp-l { - pins = "gpio93"; - function = "gpio"; - input-enable; - bias-disable; - }; - - bt_en: bt-en { - pins = "gpio85"; - function = "gpio"; - drive-strength = <2>; - output-low; - bias-pull-down; - }; - - en_fp_rails: en-fp-rails { - pins = "gpio42"; - drive-strength = <2>; - output-high; - bias-disable; - }; - - en_pp3300_codec: en-pp3300-codec { - pins = "gpio67"; - drive-strength = <2>; - bias-disable; - }; - - en_pp3300_dx_edp: en-pp3300-dx-edp { - pins = "gpio80"; - function = "gpio"; - drive-strength = <2>; - /* Has external pulldown */ - bias-disable; - }; - - en_pp3300_hub: en-pp3300-hub { - pins = "gpio24"; - function = "gpio"; - drive-strength = <2>; - /* Has external pulldown */ - bias-disable; - }; - - fp_to_ap_irq_l: fp-to-ap-irq-l { - pins = "gpio61"; - function = "gpio"; - input-enable; - /* Has external pullup */ - bias-disable; - }; - - h1_ap_int_odl: h1-ap-int-odl { - pins = "gpio54"; - function = "gpio"; - input-enable; - bias-pull-up; - }; - - hp_irq: hp-irq { - pins = "gpio101"; - function = "gpio"; - bias-pull-up; - }; - - p_sensor_int_l: p-sensor-int-l { - pins = "gpio141"; - function = "gpio"; - input-enable; - bias-pull-up; - }; - - pen_irq_l: pen-irq-l { - pins = "gpio43"; - function = "gpio"; - /* Has external pullup */ - bias-disable; - }; - - pen_pdct_l: pen-pdct-l { - pins = "gpio39"; - function = "gpio"; - /* Has external pullup */ - bias-disable; - }; - - qup_spi8_cs_gpio_init_high: qup-spi8-cs-gpio-init-high { - pins = "gpio35"; - output-high; - }; - - qup_spi11_cs_gpio_init_high: qup-spi11-cs-gpio-init-high { - pins = "gpio47"; - output-high; - }; - - qup_spi12_cs_gpio_init_high: qup-spi12-cs-gpio-init-high { - pins = "gpio51"; - output-high; - }; - - qup_uart7_sleep_cts: qup-uart7-sleep-cts { - pins = "gpio28"; - function = "gpio"; - /* - * Configure a pull-down on CTS to match the pull of - * the Bluetooth module. - */ - bias-pull-down; - }; - - qup_uart7_sleep_rts: qup-uart7-sleep-rts { - pins = "gpio29"; - function = "gpio"; - /* - * Configure pull-down on RTS. As RTS is active low - * signal, pull it low to indicate the BT SoC that it - * can wakeup the system anytime from suspend state by - * pulling RX low (by sending wakeup bytes). - */ - bias-pull-down; - }; - - qup_uart7_sleep_rx: qup-uart7-sleep-rx { - pins = "gpio31"; - function = "gpio"; - /* - * Configure a pull-up on RX. This is needed to avoid - * garbage data when the TX pin of the Bluetooth module - * is floating which may cause spurious wakeups. - */ - bias-pull-up; - }; - - qup_uart7_sleep_tx: qup-uart7-sleep-tx { - pins = "gpio30"; - function = "gpio"; - /* - * Configure pull-up on TX when it isn't actively driven - * to prevent BT SoC from receiving garbage during sleep. - */ - bias-pull-up; - }; - - sd_cd: sd-cd { - pins = "gpio91"; - function = "gpio"; - bias-pull-up; - }; - - tp_int_odl: tp-int-odl { - pins = "gpio102"; - function = "gpio"; - /* Has external pullup */ - bias-disable; - }; - - ts_int_l: ts-int-l { - pins = "gpio81"; - function = "gpio"; - /* Has external pullup */ - bias-pull-up; - }; - - ts_reset_l: ts-reset-l { - pins = "gpio105"; - function = "gpio"; - /* Has external pullup */ - bias-disable; - drive-strength = <2>; - }; - - uf_cam_en: uf-cam-en { - pins = "gpio6"; - function = "gpio"; - drive-strength = <2>; - /* Has external pulldown */ - bias-disable; - }; - - wf_cam_en: wf-cam-en { - pins = "gpio7"; - function = "gpio"; - drive-strength = <2>; - /* Has external pulldown */ - bias-disable; - }; -}; diff --git a/arch/arm64/boot/dts/qcom/sc7280-herobrine-herobrine-r1.dts b/arch/arm64/boot/dts/qcom/sc7280-herobrine-herobrine-r1.dts index f95273052da0..b69ca09d9bfb 100644 --- a/arch/arm64/boot/dts/qcom/sc7280-herobrine-herobrine-r1.dts +++ b/arch/arm64/boot/dts/qcom/sc7280-herobrine-herobrine-r1.dts @@ -14,6 +14,36 @@ compatible = "google,herobrine", "qcom,sc7280"; }; +/* + * ADDITIONS TO FIXED REGULATORS DEFINED IN PARENT DEVICE TREE FILES + * + * Sort order matches the order in the parent files (parents before children). + */ + +&pp3300_codec { + status = "okay"; +}; + +&pp3300_fp_mcu { + status = "okay"; +}; + +&pp2850_vcm_wf_cam { + status = "okay"; +}; + +&pp2850_wf_cam { + status = "okay"; +}; + +&pp1800_wf_cam { + status = "okay"; +}; + +&pp1200_wf_cam { + status = "okay"; +}; + /* ADDITIONS TO NODES DEFINED IN PARENT DEVICE TREE FILES */ &ap_spi_fp { @@ -70,6 +100,14 @@ ts_i2c: &i2c13 { }; }; +&mdss_edp { + status = "okay"; +}; + +&mdss_edp_phy { + status = "okay"; +}; + /* For nvme */ &pcie1 { status = "okay"; diff --git a/arch/arm64/boot/dts/qcom/sc7280-herobrine-villager-r0.dts b/arch/arm64/boot/dts/qcom/sc7280-herobrine-villager-r0.dts new file mode 100644 index 000000000000..d3d6ffad4eff --- /dev/null +++ b/arch/arm64/boot/dts/qcom/sc7280-herobrine-villager-r0.dts @@ -0,0 +1,304 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Google Villager board device tree source + * + * Copyright 2022 Google LLC. + */ + +/dts-v1/; + +#include "sc7280-herobrine.dtsi" + +/ { + model = "Google Villager (rev0+)"; + compatible = "google,villager", "qcom,sc7280"; +}; + +/* + * ADDITIONS TO FIXED REGULATORS DEFINED IN PARENT DEVICE TREE FILES + * + * Sort order matches the order in the parent files (parents before children). + */ + +&pp3300_codec { + status = "okay"; +}; + +/* ADDITIONS TO NODES DEFINED IN PARENT DEVICE TREE FILES */ + +ap_tp_i2c: &i2c0 { + status = "okay"; + clock-frequency = <400000>; + + trackpad: trackpad@2c { + compatible = "hid-over-i2c"; + reg = <0x2c>; + pinctrl-names = "default"; + pinctrl-0 = <&tp_int_odl>; + + interrupt-parent = <&tlmm>; + interrupts = <7 IRQ_TYPE_EDGE_FALLING>; + + hid-descr-addr = <0x20>; + vcc-supply = <&pp3300_z1>; + + wakeup-source; + }; +}; + +&ap_sar_sensor_i2c { + status = "okay"; +}; + +&ap_sar_sensor0 { + status = "okay"; +}; + +&ap_sar_sensor1 { + status = "okay"; +}; + +&mdss_edp { + status = "okay"; +}; + +&mdss_edp_phy { + status = "okay"; +}; + +/* For nvme */ +&pcie1 { + status = "okay"; +}; + +/* For nvme */ +&pcie1_phy { + status = "okay"; +}; + +/* For eMMC */ +&sdhc_1 { + status = "okay"; +}; + +/* PINCTRL - BOARD-SPECIFIC */ + +/* + * Methodology for gpio-line-names: + * - If a pin goes to herobrine board and is named it gets that name. + * - If a pin goes to herobrine board and is not named, it gets no name. + * - If a pin is totally internal to Qcard then it gets Qcard name. + * - If a pin is not hooked up on Qcard, it gets no name. + */ + +&pm8350c_gpios { + gpio-line-names = "FLASH_STROBE_1", /* 1 */ + "AP_SUSPEND", + "PM8008_1_RST_N", + "", + "", + "", + "PMIC_EDP_BL_EN", + "PMIC_EDP_BL_PWM", + ""; +}; + +&tlmm { + gpio-line-names = "AP_TP_I2C_SDA", /* 0 */ + "AP_TP_I2C_SCL", + "SSD_RST_L", + "PE_WAKE_ODL", + "AP_SAR_SDA", + "AP_SAR_SCL", + "PRB_SC_GPIO_6", + "TP_INT_ODL", + "HP_I2C_SDA", + "HP_I2C_SCL", + + "GNSS_L1_EN", /* 10 */ + "GNSS_L5_EN", + "SPI_AP_MOSI", + "SPI_AP_MISO", + "SPI_AP_CLK", + "SPI_AP_CS0_L", + /* + * AP_FLASH_WP is crossystem ABI. Schematics + * call it BIOS_FLASH_WP_OD. + */ + "AP_FLASH_WP", + "", + "AP_EC_INT_L", + "", + + "UF_CAM_RST_L", /* 20 */ + "WF_CAM_RST_L", + "UART_AP_TX_DBG_RX", + "UART_DBG_TX_AP_RX", + "", + "PM8008_IRQ_1", + "HOST2WLAN_SOL", + "WLAN2HOST_SOL", + "MOS_BT_UART_CTS", + "MOS_BT_UART_RFR", + + "MOS_BT_UART_TX", /* 30 */ + "MOS_BT_UART_RX", + "PRB_SC_GPIO_32", + "HUB_RST_L", + "", + "", + "AP_SPI_FP_MISO", + "AP_SPI_FP_MOSI", + "AP_SPI_FP_CLK", + "AP_SPI_FP_CS_L", + + "AP_EC_SPI_MISO", /* 40 */ + "AP_EC_SPI_MOSI", + "AP_EC_SPI_CLK", + "AP_EC_SPI_CS_L", + "LCM_RST_L", + "EARLY_EUD_N", + "", + "DP_HOT_PLUG_DET", + "IO_BRD_MLB_ID0", + "IO_BRD_MLB_ID1", + + "IO_BRD_MLB_ID2", /* 50 */ + "SSD_EN", + "TS_I2C_SDA_CONN", + "TS_I2C_CLK_CONN", + "TS_RST_CONN", + "TS_INT_CONN", + "AP_I2C_TPM_SDA", + "AP_I2C_TPM_SCL", + "PRB_SC_GPIO_58", + "PRB_SC_GPIO_59", + + "EDP_HOT_PLUG_DET_N", /* 60 */ + "FP_TO_AP_IRQ_L", + "", + "AMP_EN", + "CAM0_MCLK_GPIO_64", + "CAM1_MCLK_GPIO_65", + "WF_CAM_MCLK", + "PRB_SC_GPIO_67", + "FPMCU_BOOT0", + "UF_CAM_SDA", + + "UF_CAM_SCL", /* 70 */ + "", + "", + "WF_CAM_SDA", + "WF_CAM_SCL", + "", + "", + "EN_FP_RAILS", + "FP_RST_L", + "PCIE1_CLKREQ_ODL", + + "EN_PP3300_DX_EDP", /* 80 */ + "SC_GPIO_81", + "FORCED_USB_BOOT", + "WCD_RESET_N", + "MOS_WLAN_EN", + "MOS_BT_EN", + "MOS_SW_CTRL", + "MOS_PCIE0_RST", + "MOS_PCIE0_CLKREQ_N", + "MOS_PCIE0_WAKE_N", + + "MOS_LAA_AS_EN", /* 90 */ + "SD_CD_ODL", + "", + "", + "MOS_BT_WLAN_SLIMBUS_CLK", + "MOS_BT_WLAN_SLIMBUS_DAT0", + "HP_MCLK", + "HP_BCLK", + "HP_DOUT", + "HP_DIN", + + "HP_LRCLK", /* 100 */ + "HP_IRQ", + "", + "", + "GSC_AP_INT_ODL", + "EN_PP3300_CODEC", + "AMP_BCLK", + "AMP_DIN", + "AMP_LRCLK", + "UIM1_DATA_GPIO_109", + + "UIM1_CLK_GPIO_110", /* 110 */ + "UIM1_RESET_GPIO_111", + "PRB_SC_GPIO_112", + "UIM0_DATA", + "UIM0_CLK", + "UIM0_RST", + "UIM0_PRESENT_ODL", + "SDM_RFFE0_CLK", + "SDM_RFFE0_DATA", + "WF_CAM_EN", + + "FASTBOOT_SEL_0", /* 120 */ + "SC_GPIO_121", + "FASTBOOT_SEL_1", + "SC_GPIO_123", + "FASTBOOT_SEL_2", + "SM_RFFE4_CLK_GRFC_8", + "SM_RFFE4_DATA_GRFC_9", + "WLAN_COEX_UART1_RX", + "WLAN_COEX_UART1_TX", + "PRB_SC_GPIO_129", + + "LCM_ID0", /* 130 */ + "LCM_ID1", + "", + "SDR_QLINK_REQ", + "SDR_QLINK_EN", + "QLINK0_WMSS_RESET_N", + "SMR526_QLINK1_REQ", + "SMR526_QLINK1_EN", + "SMR526_QLINK1_WMSS_RESET_N", + "PRB_SC_GPIO_139", + + "SAR1_IRQ_ODL", /* 140 */ + "SAR0_IRQ_ODL", + "PRB_SC_GPIO_142", + "", + "WCD_SWR_TX_CLK", + "WCD_SWR_TX_DATA0", + "WCD_SWR_TX_DATA1", + "WCD_SWR_RX_CLK", + "WCD_SWR_RX_DATA0", + "WCD_SWR_RX_DATA1", + + "DMIC01_CLK", /* 150 */ + "DMIC01_DATA", + "DMIC23_CLK", + "DMIC23_DATA", + "", + "", + "EC_IN_RW_ODL", + "HUB_EN", + "WCD_SWR_TX_DATA2", + "", + + "", /* 160 */ + "", + "", + "", + "", + "", + "", + "", + "", + "", + + "", /* 170 */ + "MOS_BLE_UART_TX", + "MOS_BLE_UART_RX", + "", + "", + ""; +}; diff --git a/arch/arm64/boot/dts/qcom/sc7280-herobrine.dtsi b/arch/arm64/boot/dts/qcom/sc7280-herobrine.dtsi index dc17f2079695..9cb1bc8ed6b5 100644 --- a/arch/arm64/boot/dts/qcom/sc7280-herobrine.dtsi +++ b/arch/arm64/boot/dts/qcom/sc7280-herobrine.dtsi @@ -92,6 +92,7 @@ pinctrl-0 = <&en_pp3300_codec>; vin-supply = <&pp3300_z1>; + status = "disabled"; }; pp3300_left_in_mlb: pp3300-left-in-mlb-regulator { @@ -132,6 +133,7 @@ pinctrl-0 = <&en_fp_rails>; vin-supply = <&pp3300_z1>; + status = "disabled"; }; pp3300_hub: pp3300-hub-regulator { @@ -178,6 +180,13 @@ pinctrl-names = "default"; pinctrl-0 = <&ssd_en>; + /* + * The bootloaer may have left PCIe configured. Powering this + * off while the PCIe clocks are still running isn't great, + * so it's better to default to this regulator being on. + */ + regulator-boot-on; + vin-supply = <&pp3300_z1>; }; @@ -194,6 +203,7 @@ pinctrl-0 = <&wf_cam_en>; vin-supply = <&pp3300_z1>; + status = "disabled"; }; pp2850_wf_cam: pp2850-wf-cam-regulator { @@ -214,6 +224,7 @@ */ vin-supply = <&pp3300_z1>; + status = "disabled"; }; pp1800_fp: pp1800-fp-regulator { @@ -258,6 +269,7 @@ */ vin-supply = <&vreg_l19b_s0>; + status = "disabled"; }; pp1200_wf_cam: pp1200-wf-cam-regulator { @@ -278,6 +290,7 @@ */ vin-supply = <&pp3300_z1>; + status = "disabled"; }; /* BOARD-SPECIFIC TOP LEVEL NODES */ @@ -295,7 +308,10 @@ }; /* - * BOARD-LOCAL NAMES FOR REGULATORS THAT CONNECT TO QCARD + * ADJUSTMENTS TO QCARD REGULATORS + * + * Mostly this is just board-local names for regulators that come from + * Qcard, but this also has some minor regulator overrides. * * Names are only listed here if regulators go somewhere other than a * testpoint. @@ -339,8 +355,60 @@ vreg_edp_bl: &ppvar_sys {}; ts_avdd: &pp3300_left_in_mlb {}; vreg_edp_3p3: &pp3300_left_in_mlb {}; +/* Regulator overrides from Qcard */ + +/* + * Herobrine boards only use l2c to power an external audio codec (like + * alc5682) and we want that to be at 1.8V, not at some slightly lower voltage. + */ +&vreg_l2c_1p8 { + regulator-min-microvolt = <1800000>; +}; + /* ADDITIONS TO NODES DEFINED IN PARENT DEVICE TREE FILES */ +&edp_panel { + /* Our board provides power to the qcard for the eDP panel. */ + power-supply = <&vreg_edp_3p3>; +}; + +ap_sar_sensor_i2c: &i2c1 { + clock-frequency = <400000>; + status = "disabled"; + + ap_sar_sensor0: proximity@28 { + compatible = "semtech,sx9324"; + reg = <0x28>; + #io-channel-cells = <1>; + pinctrl-names = "default"; + pinctrl-0 = <&sar0_irq_odl>; + + interrupt-parent = <&tlmm>; + interrupts = <141 IRQ_TYPE_LEVEL_LOW>; + + vdd-supply = <&pp1800_prox>; + + label = "proximity-wifi-lte0"; + status = "disabled"; + }; + + ap_sar_sensor1: proximity@2c { + compatible = "semtech,sx9324"; + reg = <0x2c>; + #io-channel-cells = <1>; + pinctrl-names = "default"; + pinctrl-0 = <&sar1_irq_odl>; + + interrupt-parent = <&tlmm>; + interrupts = <140 IRQ_TYPE_LEVEL_LOW>; + + vdd-supply = <&pp1800_prox>; + + label = "proximity-wifi-lte1"; + status = "disabled"; + }; +}; + ap_i2c_tpm: &i2c14 { status = "okay"; clock-frequency = <400000>; @@ -357,6 +425,14 @@ ap_i2c_tpm: &i2c14 { }; }; +&mdss { + status = "okay"; +}; + +&mdss_mdp { + status = "okay"; +}; + /* NVMe drive, enabled on a per-board basis */ &pcie1 { pinctrl-names = "default"; @@ -366,6 +442,17 @@ ap_i2c_tpm: &i2c14 { vddpe-3v3-supply = <&pp3300_ssd>; }; +&pm8350c_pwm { + status = "okay"; +}; + +&pm8350c_pwm_backlight { + status = "okay"; + + /* Our board provides power to the qcard for the backlight */ + power-supply = <&vreg_edp_bl>; +}; + &pmk8350_rtc { status = "disabled"; }; @@ -677,7 +764,6 @@ ap_ec_spi: &spi10 { function = "gpio"; bias-disable; drive-strength = <2>; - output-high; }; fp_to_ap_irq_l: fp-to-ap-irq-l { @@ -691,7 +777,6 @@ ap_ec_spi: &spi10 { pins = "gpio68"; function = "gpio"; bias-disable; - output-low; }; gsc_ap_int_odl: gsc-ap-int-odl { @@ -741,7 +826,7 @@ ap_ec_spi: &spi10 { bias-pull-up; }; - sar1_irq_odl: sar0-irq-odl { + sar1_irq_odl: sar1-irq-odl { pins = "gpio140"; function = "gpio"; bias-pull-up; diff --git a/arch/arm64/boot/dts/qcom/sc7280-idp.dts b/arch/arm64/boot/dts/qcom/sc7280-idp.dts index a7be133a782f..6d3ff80582ae 100644 --- a/arch/arm64/boot/dts/qcom/sc7280-idp.dts +++ b/arch/arm64/boot/dts/qcom/sc7280-idp.dts @@ -90,7 +90,7 @@ }; &usb_2_dwc3 { - dr_mode = "host"; + dr_mode = "otg"; }; &usb_2_hsphy { diff --git a/arch/arm64/boot/dts/qcom/sc7280-idp.dtsi b/arch/arm64/boot/dts/qcom/sc7280-idp.dtsi index ecbf2b89d896..5eb668991e24 100644 --- a/arch/arm64/boot/dts/qcom/sc7280-idp.dtsi +++ b/arch/arm64/boot/dts/qcom/sc7280-idp.dtsi @@ -233,6 +233,14 @@ }; }; +&gpi_dma0 { + status = "okay"; +}; + +&gpi_dma1 { + status = "okay"; +}; + &ipa { status = "okay"; modem-init; @@ -400,10 +408,13 @@ &qup_uart7_cts { /* - * Configure a pull-down on CTS to match the pull of - * the Bluetooth module. + * Configure a bias-bus-hold on CTS to lower power + * usage when Bluetooth is turned off. Bus hold will + * maintain a low power state regardless of whether + * the Bluetooth module drives the pin in either + * direction or leaves the pin fully unpowered. */ - bias-pull-down; + bias-bus-hold; }; &qup_uart7_rts { @@ -495,10 +506,13 @@ pins = "gpio28"; function = "gpio"; /* - * Configure a pull-down on CTS to match the pull of - * the Bluetooth module. + * Configure a bias-bus-hold on CTS to lower power + * usage when Bluetooth is turned off. Bus hold will + * maintain a low power state regardless of whether + * the Bluetooth module drives the pin in either + * direction or leaves the pin fully unpowered. */ - bias-pull-down; + bias-bus-hold; }; qup_uart7_sleep_rts: qup-uart7-sleep-rts { @@ -547,3 +561,13 @@ }; }; +&remoteproc_wpss { + status = "okay"; +}; + +&wifi { + status = "okay"; + wifi-firmware { + iommus = <&apps_smmu 0x1c02 0x1>; + }; +}; diff --git a/arch/arm64/boot/dts/qcom/sc7280-idp2.dts b/arch/arm64/boot/dts/qcom/sc7280-idp2.dts index 73b9911dd802..d4f7cab17078 100644 --- a/arch/arm64/boot/dts/qcom/sc7280-idp2.dts +++ b/arch/arm64/boot/dts/qcom/sc7280-idp2.dts @@ -34,3 +34,7 @@ &nvme_3v3_regulator { gpio = <&tlmm 51 GPIO_ACTIVE_HIGH>; }; + +&pm8350c_pwm { + status = "okay"; +}; diff --git a/arch/arm64/boot/dts/qcom/sc7280-qcard.dtsi b/arch/arm64/boot/dts/qcom/sc7280-qcard.dtsi index b833ba1e8f4a..d59002d4492e 100644 --- a/arch/arm64/boot/dts/qcom/sc7280-qcard.dtsi +++ b/arch/arm64/boot/dts/qcom/sc7280-qcard.dtsi @@ -29,6 +29,16 @@ serial0 = &uart5; serial1 = &uart7; }; + + pm8350c_pwm_backlight: backlight { + compatible = "pwm-backlight"; + status = "disabled"; + + enable-gpios = <&pm8350c_gpios 7 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&pmic_edp_bl_en>; + pwms = <&pm8350c_pwm 3 65535>; + }; }; &apps_rsc { @@ -293,11 +303,50 @@ modem-init; }; +/* NOTE: Not all Qcards have eDP connector stuffed */ +&mdss_edp { + vdda-0p9-supply = <&vdd_a_edp_0_0p9>; + vdda-1p2-supply = <&vdd_a_edp_0_1p2>; + + aux-bus { + edp_panel: panel { + compatible = "edp-panel"; + + backlight = <&pm8350c_pwm_backlight>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + port@0 { + reg = <0>; + edp_panel_in: endpoint { + remote-endpoint = <&mdss_edp_out>; + }; + }; + }; + }; + }; +}; + +&mdss_edp_out { + remote-endpoint = <&edp_panel_in>; +}; + +&mdss_edp_phy { + vdda-pll-supply = <&vdd_a_edp_0_0p9>; + vdda-phy-supply = <&vdd_a_edp_0_1p2>; +}; + &pcie1_phy { vdda-phy-supply = <&vreg_l10c_0p88>; vdda-pll-supply = <&vreg_l6b_1p2>; }; +&pm8350c_pwm { + pinctrl-names = "default"; + pinctrl-0 = <&pmic_edp_bl_pwm>; +}; + &pmk8350_vadc { pmk8350-die-temp@3 { reg = <PMK8350_ADC7_DIE_TEMP>; @@ -383,6 +432,11 @@ mos_bt_uart: &uart7 { * baseboard or board device tree, not here. */ +/* No external pull for eDP HPD, so set the internal one. */ +&edp_hot_plug_det { + bias-pull-down; +}; + /* * For ts_i2c * @@ -398,8 +452,14 @@ mos_bt_uart: &uart7 { /* For mos_bt_uart */ &qup_uart7_cts { - /* Configure a pull-down on CTS to match the pull of the Bluetooth module. */ - bias-pull-down; + /* + * Configure a bias-bus-hold on CTS to lower power + * usage when Bluetooth is turned off. Bus hold will + * maintain a low power state regardless of whether + * the Bluetooth module drives the pin in either + * direction or leaves the pin fully unpowered. + */ + bias-bus-hold; }; /* For mos_bt_uart */ @@ -490,10 +550,13 @@ mos_bt_uart: &uart7 { pins = "gpio28"; function = "gpio"; /* - * Configure a pull-down on CTS to match the pull of - * the Bluetooth module. + * Configure a bias-bus-hold on CTS to lower power + * usage when Bluetooth is turned off. Bus hold will + * maintain a low power state regardless of whether + * the Bluetooth module drives the pin in either + * direction or leaves the pin fully unpowered. */ - bias-pull-down; + bias-bus-hold; }; /* For mos_bt_uart */ diff --git a/arch/arm64/boot/dts/qcom/sc7280.dtsi b/arch/arm64/boot/dts/qcom/sc7280.dtsi index f0b64be63c21..f72451f7f539 100644 --- a/arch/arm64/boot/dts/qcom/sc7280.dtsi +++ b/arch/arm64/boot/dts/qcom/sc7280.dtsi @@ -8,8 +8,11 @@ #include <dt-bindings/clock/qcom,dispcc-sc7280.h> #include <dt-bindings/clock/qcom,gcc-sc7280.h> #include <dt-bindings/clock/qcom,gpucc-sc7280.h> +#include <dt-bindings/clock/qcom,lpassaudiocc-sc7280.h> +#include <dt-bindings/clock/qcom,lpasscorecc-sc7280.h> #include <dt-bindings/clock/qcom,rpmh.h> #include <dt-bindings/clock/qcom,videocc-sc7280.h> +#include <dt-bindings/dma/qcom-gpi.h> #include <dt-bindings/gpio/gpio.h> #include <dt-bindings/interconnect/qcom,osm-l3.h> #include <dt-bindings/interconnect/qcom,sc7280.h> @@ -85,6 +88,11 @@ #size-cells = <2>; ranges; + wlan_ce_mem: memory@4cd000 { + no-map; + reg = <0x0 0x004cd000 0x0 0x1000>; + }; + hyp_mem: memory@80000000 { reg = <0x0 0x80000000 0x0 0x600000>; no-map; @@ -842,6 +850,11 @@ power-domains = <&rpmhpd SC7280_MX>; #address-cells = <1>; #size-cells = <1>; + + gpu_speed_bin: gpu_speed_bin@1e9 { + reg = <0x1e9 0x2>; + bits = <5 8>; + }; }; sdhc_1: sdhci@7c4000 { @@ -881,6 +894,8 @@ mmc-hs400-1_8v; mmc-hs400-enhanced-strobe; + resets = <&gcc GCC_SDCC1_BCR>; + sdhc1_opp_table: opp-table { compatible = "operating-points-v2"; @@ -901,6 +916,28 @@ }; + gpi_dma0: dma-controller@900000 { + #dma-cells = <3>; + compatible = "qcom,sc7280-gpi-dma"; + reg = <0 0x00900000 0 0x60000>; + interrupts = <GIC_SPI 244 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 245 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 246 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 247 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 248 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 249 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 250 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 251 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 252 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 253 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 254 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 255 IRQ_TYPE_LEVEL_HIGH>; + dma-channels = <12>; + dma-channel-mask = <0x7f>; + iommus = <&apps_smmu 0x0136 0x0>; + status = "disabled"; + }; + qupv3_id_0: geniqup@9c0000 { compatible = "qcom,geni-se-qup"; reg = <0 0x009c0000 0 0x2000>; @@ -928,6 +965,9 @@ <&aggre1_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI1 0>; interconnect-names = "qup-core", "qup-config", "qup-memory"; + dmas = <&gpi_dma0 0 0 QCOM_GPI_I2C>, + <&gpi_dma0 1 0 QCOM_GPI_I2C>; + dma-names = "tx", "rx"; status = "disabled"; }; @@ -946,6 +986,9 @@ interconnects = <&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>, <&gem_noc MASTER_APPSS_PROC 0 &cnoc2 SLAVE_QUP_0 0>; interconnect-names = "qup-core", "qup-config"; + dmas = <&gpi_dma0 0 0 QCOM_GPI_SPI>, + <&gpi_dma0 1 0 QCOM_GPI_SPI>; + dma-names = "tx", "rx"; status = "disabled"; }; @@ -980,6 +1023,9 @@ <&aggre1_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI1 0>; interconnect-names = "qup-core", "qup-config", "qup-memory"; + dmas = <&gpi_dma0 0 1 QCOM_GPI_I2C>, + <&gpi_dma0 1 1 QCOM_GPI_I2C>; + dma-names = "tx", "rx"; status = "disabled"; }; @@ -998,6 +1044,9 @@ interconnects = <&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>, <&gem_noc MASTER_APPSS_PROC 0 &cnoc2 SLAVE_QUP_0 0>; interconnect-names = "qup-core", "qup-config"; + dmas = <&gpi_dma0 0 1 QCOM_GPI_SPI>, + <&gpi_dma0 1 1 QCOM_GPI_SPI>; + dma-names = "tx", "rx"; status = "disabled"; }; @@ -1032,6 +1081,9 @@ <&aggre1_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI1 0>; interconnect-names = "qup-core", "qup-config", "qup-memory"; + dmas = <&gpi_dma0 0 2 QCOM_GPI_I2C>, + <&gpi_dma0 1 2 QCOM_GPI_I2C>; + dma-names = "tx", "rx"; status = "disabled"; }; @@ -1050,6 +1102,9 @@ interconnects = <&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>, <&gem_noc MASTER_APPSS_PROC 0 &cnoc2 SLAVE_QUP_0 0>; interconnect-names = "qup-core", "qup-config"; + dmas = <&gpi_dma0 0 2 QCOM_GPI_SPI>, + <&gpi_dma0 1 2 QCOM_GPI_SPI>; + dma-names = "tx", "rx"; status = "disabled"; }; @@ -1084,6 +1139,9 @@ <&aggre1_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI1 0>; interconnect-names = "qup-core", "qup-config", "qup-memory"; + dmas = <&gpi_dma0 0 3 QCOM_GPI_I2C>, + <&gpi_dma0 1 3 QCOM_GPI_I2C>; + dma-names = "tx", "rx"; status = "disabled"; }; @@ -1102,6 +1160,9 @@ interconnects = <&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>, <&gem_noc MASTER_APPSS_PROC 0 &cnoc2 SLAVE_QUP_0 0>; interconnect-names = "qup-core", "qup-config"; + dmas = <&gpi_dma0 0 3 QCOM_GPI_SPI>, + <&gpi_dma0 1 3 QCOM_GPI_SPI>; + dma-names = "tx", "rx"; status = "disabled"; }; @@ -1136,6 +1197,9 @@ <&aggre1_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI1 0>; interconnect-names = "qup-core", "qup-config", "qup-memory"; + dmas = <&gpi_dma0 0 4 QCOM_GPI_I2C>, + <&gpi_dma0 1 4 QCOM_GPI_I2C>; + dma-names = "tx", "rx"; status = "disabled"; }; @@ -1154,6 +1218,9 @@ interconnects = <&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>, <&gem_noc MASTER_APPSS_PROC 0 &cnoc2 SLAVE_QUP_0 0>; interconnect-names = "qup-core", "qup-config"; + dmas = <&gpi_dma0 0 4 QCOM_GPI_SPI>, + <&gpi_dma0 1 4 QCOM_GPI_SPI>; + dma-names = "tx", "rx"; status = "disabled"; }; @@ -1188,6 +1255,9 @@ <&aggre1_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI1 0>; interconnect-names = "qup-core", "qup-config", "qup-memory"; + dmas = <&gpi_dma0 0 5 QCOM_GPI_I2C>, + <&gpi_dma0 1 5 QCOM_GPI_I2C>; + dma-names = "tx", "rx"; status = "disabled"; }; @@ -1206,6 +1276,9 @@ interconnects = <&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>, <&gem_noc MASTER_APPSS_PROC 0 &cnoc2 SLAVE_QUP_0 0>; interconnect-names = "qup-core", "qup-config"; + dmas = <&gpi_dma0 0 5 QCOM_GPI_SPI>, + <&gpi_dma0 1 5 QCOM_GPI_SPI>; + dma-names = "tx", "rx"; status = "disabled"; }; @@ -1240,6 +1313,9 @@ <&aggre1_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI1 0>; interconnect-names = "qup-core", "qup-config", "qup-memory"; + dmas = <&gpi_dma0 0 6 QCOM_GPI_I2C>, + <&gpi_dma0 1 6 QCOM_GPI_I2C>; + dma-names = "tx", "rx"; status = "disabled"; }; @@ -1258,6 +1334,9 @@ interconnects = <&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>, <&gem_noc MASTER_APPSS_PROC 0 &cnoc2 SLAVE_QUP_0 0>; interconnect-names = "qup-core", "qup-config"; + dmas = <&gpi_dma0 0 6 QCOM_GPI_SPI>, + <&gpi_dma0 1 6 QCOM_GPI_SPI>; + dma-names = "tx", "rx"; status = "disabled"; }; @@ -1292,6 +1371,9 @@ <&aggre1_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI1 0>; interconnect-names = "qup-core", "qup-config", "qup-memory"; + dmas = <&gpi_dma0 0 7 QCOM_GPI_I2C>, + <&gpi_dma0 1 7 QCOM_GPI_I2C>; + dma-names = "tx", "rx"; status = "disabled"; }; @@ -1310,6 +1392,9 @@ interconnects = <&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>, <&gem_noc MASTER_APPSS_PROC 0 &cnoc2 SLAVE_QUP_0 0>; interconnect-names = "qup-core", "qup-config"; + dmas = <&gpi_dma0 0 7 QCOM_GPI_SPI>, + <&gpi_dma0 1 7 QCOM_GPI_SPI>; + dma-names = "tx", "rx"; status = "disabled"; }; @@ -1330,6 +1415,28 @@ }; }; + gpi_dma1: dma-controller@a00000 { + #dma-cells = <3>; + compatible = "qcom,sc7280-gpi-dma"; + reg = <0 0x00a00000 0 0x60000>; + interrupts = <GIC_SPI 279 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 280 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 281 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 282 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 283 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 284 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 293 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 294 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 295 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 296 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 297 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 298 IRQ_TYPE_LEVEL_HIGH>; + dma-channels = <12>; + dma-channel-mask = <0x1e>; + iommus = <&apps_smmu 0x56 0x0>; + status = "disabled"; + }; + qupv3_id_1: geniqup@ac0000 { compatible = "qcom,geni-se-qup"; reg = <0 0x00ac0000 0 0x2000>; @@ -1357,6 +1464,9 @@ <&aggre2_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI1 0>; interconnect-names = "qup-core", "qup-config", "qup-memory"; + dmas = <&gpi_dma1 0 0 QCOM_GPI_I2C>, + <&gpi_dma1 1 0 QCOM_GPI_I2C>; + dma-names = "tx", "rx"; status = "disabled"; }; @@ -1375,6 +1485,9 @@ interconnects = <&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>, <&gem_noc MASTER_APPSS_PROC 0 &cnoc2 SLAVE_QUP_1 0>; interconnect-names = "qup-core", "qup-config"; + dmas = <&gpi_dma1 0 0 QCOM_GPI_SPI>, + <&gpi_dma1 1 0 QCOM_GPI_SPI>; + dma-names = "tx", "rx"; status = "disabled"; }; @@ -1409,6 +1522,9 @@ <&aggre2_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI1 0>; interconnect-names = "qup-core", "qup-config", "qup-memory"; + dmas = <&gpi_dma1 0 1 QCOM_GPI_I2C>, + <&gpi_dma1 1 1 QCOM_GPI_I2C>; + dma-names = "tx", "rx"; status = "disabled"; }; @@ -1427,6 +1543,9 @@ interconnects = <&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>, <&gem_noc MASTER_APPSS_PROC 0 &cnoc2 SLAVE_QUP_1 0>; interconnect-names = "qup-core", "qup-config"; + dmas = <&gpi_dma1 0 1 QCOM_GPI_SPI>, + <&gpi_dma1 1 1 QCOM_GPI_SPI>; + dma-names = "tx", "rx"; status = "disabled"; }; @@ -1461,6 +1580,9 @@ <&aggre2_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI1 0>; interconnect-names = "qup-core", "qup-config", "qup-memory"; + dmas = <&gpi_dma1 0 2 QCOM_GPI_I2C>, + <&gpi_dma1 1 2 QCOM_GPI_I2C>; + dma-names = "tx", "rx"; status = "disabled"; }; @@ -1479,6 +1601,9 @@ interconnects = <&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>, <&gem_noc MASTER_APPSS_PROC 0 &cnoc2 SLAVE_QUP_1 0>; interconnect-names = "qup-core", "qup-config"; + dmas = <&gpi_dma1 0 2 QCOM_GPI_SPI>, + <&gpi_dma1 1 2 QCOM_GPI_SPI>; + dma-names = "tx", "rx"; status = "disabled"; }; @@ -1513,6 +1638,9 @@ <&aggre2_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI1 0>; interconnect-names = "qup-core", "qup-config", "qup-memory"; + dmas = <&gpi_dma1 0 3 QCOM_GPI_I2C>, + <&gpi_dma1 1 3 QCOM_GPI_I2C>; + dma-names = "tx", "rx"; status = "disabled"; }; @@ -1531,6 +1659,9 @@ interconnects = <&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>, <&gem_noc MASTER_APPSS_PROC 0 &cnoc2 SLAVE_QUP_1 0>; interconnect-names = "qup-core", "qup-config"; + dmas = <&gpi_dma1 0 3 QCOM_GPI_SPI>, + <&gpi_dma1 1 3 QCOM_GPI_SPI>; + dma-names = "tx", "rx"; status = "disabled"; }; @@ -1565,6 +1696,9 @@ <&aggre2_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI1 0>; interconnect-names = "qup-core", "qup-config", "qup-memory"; + dmas = <&gpi_dma1 0 4 QCOM_GPI_I2C>, + <&gpi_dma1 1 4 QCOM_GPI_I2C>; + dma-names = "tx", "rx"; status = "disabled"; }; @@ -1583,6 +1717,9 @@ interconnects = <&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>, <&gem_noc MASTER_APPSS_PROC 0 &cnoc2 SLAVE_QUP_1 0>; interconnect-names = "qup-core", "qup-config"; + dmas = <&gpi_dma1 0 4 QCOM_GPI_SPI>, + <&gpi_dma1 1 4 QCOM_GPI_SPI>; + dma-names = "tx", "rx"; status = "disabled"; }; @@ -1617,6 +1754,9 @@ <&aggre2_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI1 0>; interconnect-names = "qup-core", "qup-config", "qup-memory"; + dmas = <&gpi_dma1 0 5 QCOM_GPI_I2C>, + <&gpi_dma1 1 5 QCOM_GPI_I2C>; + dma-names = "tx", "rx"; status = "disabled"; }; @@ -1635,6 +1775,9 @@ interconnects = <&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>, <&gem_noc MASTER_APPSS_PROC 0 &cnoc2 SLAVE_QUP_1 0>; interconnect-names = "qup-core", "qup-config"; + dmas = <&gpi_dma1 0 5 QCOM_GPI_SPI>, + <&gpi_dma1 1 5 QCOM_GPI_SPI>; + dma-names = "tx", "rx"; status = "disabled"; }; @@ -1669,6 +1812,9 @@ <&aggre2_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI1 0>; interconnect-names = "qup-core", "qup-config", "qup-memory"; + dmas = <&gpi_dma1 0 6 QCOM_GPI_I2C>, + <&gpi_dma1 1 6 QCOM_GPI_I2C>; + dma-names = "tx", "rx"; status = "disabled"; }; @@ -1687,6 +1833,9 @@ interconnects = <&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>, <&gem_noc MASTER_APPSS_PROC 0 &cnoc2 SLAVE_QUP_1 0>; interconnect-names = "qup-core", "qup-config"; + dmas = <&gpi_dma1 0 6 QCOM_GPI_SPI>, + <&gpi_dma1 1 6 QCOM_GPI_SPI>; + dma-names = "tx", "rx"; status = "disabled"; }; @@ -1721,6 +1870,9 @@ <&aggre2_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI1 0>; interconnect-names = "qup-core", "qup-config", "qup-memory"; + dmas = <&gpi_dma1 0 7 QCOM_GPI_I2C>, + <&gpi_dma1 1 7 QCOM_GPI_I2C>; + dma-names = "tx", "rx"; status = "disabled"; }; @@ -1739,6 +1891,9 @@ interconnects = <&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>, <&gem_noc MASTER_APPSS_PROC 0 &cnoc2 SLAVE_QUP_1 0>; interconnect-names = "qup-core", "qup-config"; + dmas = <&gpi_dma1 0 7 QCOM_GPI_SPI>, + <&gpi_dma1 1 7 QCOM_GPI_SPI>; + dma-names = "tx", "rx"; status = "disabled"; }; @@ -1808,6 +1963,47 @@ qcom,bcm-voters = <&apps_bcm_voter>; }; + wifi: wifi@17a10040 { + compatible = "qcom,wcn6750-wifi"; + reg = <0 0x17a10040 0 0x0>; + iommus = <&apps_smmu 0x1c00 0x1>; + interrupts = <GIC_SPI 768 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 769 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 770 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 771 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 772 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 773 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 774 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 775 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 776 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 777 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 778 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 779 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 780 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 781 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 782 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 783 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 784 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 785 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 786 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 787 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 788 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 789 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 790 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 791 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 792 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 793 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 794 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 795 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 796 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 797 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 798 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 799 IRQ_TYPE_EDGE_RISING>; + qcom,rproc = <&remoteproc_wpss>; + memory-region = <&wlan_fw_mem>, <&wlan_ce_mem>; + status = "disabled"; + }; + pcie1: pci@1c08000 { compatible = "qcom,pcie-sc7280"; reg = <0 0x01c08000 0 0x3000>, @@ -1903,7 +2099,7 @@ status = "disabled"; - pcie1_lane: lanes@1c0e200 { + pcie1_lane: phy@1c0e200 { reg = <0 0x01c0e200 0 0x170>, <0 0x01c0e400 0 0x200>, <0 0x01c0ea00 0 0x1f0>, @@ -1980,6 +2176,47 @@ #clock-cells = <1>; }; + lpass_audiocc: clock-controller@3300000 { + compatible = "qcom,sc7280-lpassaudiocc"; + reg = <0 0x03300000 0 0x30000>; + clocks = <&rpmhcc RPMH_CXO_CLK>, + <&lpass_aon LPASS_AON_CC_MAIN_RCG_CLK_SRC>; + clock-names = "bi_tcxo", "lpass_aon_cc_main_rcg_clk_src"; + power-domains = <&lpass_aon LPASS_AON_CC_LPASS_AUDIO_HM_GDSC>; + #clock-cells = <1>; + #power-domain-cells = <1>; + }; + + lpass_aon: clock-controller@3380000 { + compatible = "qcom,sc7280-lpassaoncc"; + reg = <0 0x03380000 0 0x30000>; + clocks = <&rpmhcc RPMH_CXO_CLK>, + <&rpmhcc RPMH_CXO_CLK_A>, + <&lpasscore LPASS_CORE_CC_CORE_CLK>; + clock-names = "bi_tcxo", "bi_tcxo_ao", "iface"; + #clock-cells = <1>; + #power-domain-cells = <1>; + }; + + lpasscore: clock-controller@3900000 { + compatible = "qcom,sc7280-lpasscorecc"; + reg = <0 0x03900000 0 0x50000>; + clocks = <&rpmhcc RPMH_CXO_CLK>; + clock-names = "bi_tcxo"; + power-domains = <&lpass_hm LPASS_CORE_CC_LPASS_CORE_HM_GDSC>; + #clock-cells = <1>; + #power-domain-cells = <1>; + }; + + lpass_hm: clock-controller@3c00000 { + compatible = "qcom,sc7280-lpasshm"; + reg = <0 0x3c00000 0 0x28>; + clocks = <&rpmhcc RPMH_CXO_CLK>; + clock-names = "bi_tcxo"; + #clock-cells = <1>; + #power-domain-cells = <1>; + }; + lpass_ag_noc: interconnect@3c40000 { reg = <0 0x03c40000 0 0xf080>; compatible = "qcom,sc7280-lpass-ag-noc"; @@ -2003,6 +2240,9 @@ interconnect-names = "gfx-mem"; #cooling-cells = <2>; + nvmem-cells = <&gpu_speed_bin>; + nvmem-cell-names = "speed_bin"; + gpu_opp_table: opp-table { compatible = "operating-points-v2"; @@ -2010,18 +2250,56 @@ opp-hz = /bits/ 64 <315000000>; opp-level = <RPMH_REGULATOR_LEVEL_LOW_SVS>; opp-peak-kBps = <1804000>; + opp-supported-hw = <0x03>; }; opp-450000000 { opp-hz = /bits/ 64 <450000000>; opp-level = <RPMH_REGULATOR_LEVEL_SVS>; opp-peak-kBps = <4068000>; + opp-supported-hw = <0x03>; }; opp-550000000 { opp-hz = /bits/ 64 <550000000>; opp-level = <RPMH_REGULATOR_LEVEL_SVS_L1>; opp-peak-kBps = <6832000>; + opp-supported-hw = <0x03>; + }; + + opp-608000000 { + opp-hz = /bits/ 64 <608000000>; + opp-level = <RPMH_REGULATOR_LEVEL_SVS_L2>; + opp-peak-kBps = <8368000>; + opp-supported-hw = <0x02>; + }; + + opp-700000000 { + opp-hz = /bits/ 64 <700000000>; + opp-level = <RPMH_REGULATOR_LEVEL_NOM>; + opp-peak-kBps = <8532000>; + opp-supported-hw = <0x02>; + }; + + opp-812000000 { + opp-hz = /bits/ 64 <812000000>; + opp-level = <RPMH_REGULATOR_LEVEL_NOM_L1>; + opp-peak-kBps = <8532000>; + opp-supported-hw = <0x02>; + }; + + opp-840000000 { + opp-hz = /bits/ 64 <840000000>; + opp-level = <RPMH_REGULATOR_LEVEL_TURBO>; + opp-peak-kBps = <8532000>; + opp-supported-hw = <0x02>; + }; + + opp-900000000 { + opp-hz = /bits/ 64 <900000000>; + opp-level = <RPMH_REGULATOR_LEVEL_TURBO_L1>; + opp-peak-kBps = <8532000>; + opp-supported-hw = <0x02>; }; }; }; @@ -2686,6 +2964,8 @@ qcom,dll-config = <0x0007642c>; + resets = <&gcc GCC_SDCC2_BCR>; + sdhc2_opp_table: opp-table { compatible = "operating-points-v2"; @@ -2842,6 +3122,57 @@ status = "disabled"; }; + remoteproc_wpss: remoteproc@8a00000 { + compatible = "qcom,sc7280-wpss-pil"; + reg = <0 0x08a00000 0 0x10000>; + + interrupts-extended = <&intc GIC_SPI 587 IRQ_TYPE_EDGE_RISING>, + <&wpss_smp2p_in 0 IRQ_TYPE_EDGE_RISING>, + <&wpss_smp2p_in 1 IRQ_TYPE_EDGE_RISING>, + <&wpss_smp2p_in 2 IRQ_TYPE_EDGE_RISING>, + <&wpss_smp2p_in 3 IRQ_TYPE_EDGE_RISING>, + <&wpss_smp2p_in 7 IRQ_TYPE_EDGE_RISING>; + interrupt-names = "wdog", "fatal", "ready", "handover", + "stop-ack", "shutdown-ack"; + + clocks = <&gcc GCC_WPSS_AHB_BDG_MST_CLK>, + <&gcc GCC_WPSS_AHB_CLK>, + <&gcc GCC_WPSS_RSCP_CLK>, + <&rpmhcc RPMH_CXO_CLK>; + clock-names = "ahb_bdg", "ahb", + "rscp", "xo"; + + power-domains = <&rpmhpd SC7280_CX>, + <&rpmhpd SC7280_MX>; + power-domain-names = "cx", "mx"; + + memory-region = <&wpss_mem>; + + qcom,qmp = <&aoss_qmp>; + + qcom,smem-states = <&wpss_smp2p_out 0>; + qcom,smem-state-names = "stop"; + + resets = <&aoss_reset AOSS_CC_WCSS_RESTART>, + <&pdc_reset PDC_WPSS_SYNC_RESET>; + reset-names = "restart", "pdc_sync"; + + qcom,halt-regs = <&tcsr_mutex 0x37000>; + + status = "disabled"; + + glink-edge { + interrupts-extended = <&ipcc IPCC_CLIENT_WPSS + IPCC_MPROC_SIGNAL_GLINK_QMP + IRQ_TYPE_EDGE_RISING>; + mboxes = <&ipcc IPCC_CLIENT_WPSS + IPCC_MPROC_SIGNAL_GLINK_QMP>; + + label = "wpss"; + qcom,remote-pid = <13>; + }; + }; + dc_noc: interconnect@90e0000 { reg = <0 0x090e0000 0 0x5080>; compatible = "qcom,sc7280-dc-noc"; @@ -2916,6 +3247,7 @@ phys = <&usb_1_hsphy>, <&usb_1_ssphy>; phy-names = "usb2-phy", "usb3-phy"; maximum-speed = "super-speed"; + wakeup-source; }; }; @@ -3296,7 +3628,7 @@ port@1 { reg = <1>; - edp_out: endpoint { }; + mdss_edp_out: endpoint { }; }; }; diff --git a/arch/arm64/boot/dts/qcom/sdm630.dtsi b/arch/arm64/boot/dts/qcom/sdm630.dtsi index 240293592ef9..7f875bf9390a 100644 --- a/arch/arm64/boot/dts/qcom/sdm630.dtsi +++ b/arch/arm64/boot/dts/qcom/sdm630.dtsi @@ -1453,7 +1453,7 @@ reg-names = "mdp_phys"; interrupt-parent = <&mdss>; - interrupts = <0 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <0>; assigned-clocks = <&mmcc MDSS_MDP_CLK>, <&mmcc MDSS_VSYNC_CLK>; @@ -1530,7 +1530,7 @@ power-domains = <&rpmpd SDM660_VDDCX>; interrupt-parent = <&mdss>; - interrupts = <4 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <4>; assigned-clocks = <&mmcc BYTE0_CLK_SRC>, <&mmcc PCLK0_CLK_SRC>; diff --git a/arch/arm64/boot/dts/qcom/sdm660.dtsi b/arch/arm64/boot/dts/qcom/sdm660.dtsi index eccf6fde16b4..1d748c5305f4 100644 --- a/arch/arm64/boot/dts/qcom/sdm660.dtsi +++ b/arch/arm64/boot/dts/qcom/sdm660.dtsi @@ -163,7 +163,7 @@ power-domains = <&rpmpd SDM660_VDDCX>; interrupt-parent = <&mdss>; - interrupts = <5 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <5>; assigned-clocks = <&mmcc BYTE1_CLK_SRC>, <&mmcc PCLK1_CLK_SRC>; diff --git a/arch/arm64/boot/dts/qcom/sdm845-db845c.dts b/arch/arm64/boot/dts/qcom/sdm845-db845c.dts index 28fe45c5d516..194ebeb3259c 100644 --- a/arch/arm64/boot/dts/qcom/sdm845-db845c.dts +++ b/arch/arm64/boot/dts/qcom/sdm845-db845c.dts @@ -28,6 +28,13 @@ stdout-path = "serial0:115200n8"; }; + /* Fixed crystal oscillator dedicated to MCP2517FD */ + clk40M: can-clock { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <40000000>; + }; + dc12v: dc12v-regulator { compatible = "regulator-fixed"; regulator-name = "DC12V"; @@ -746,6 +753,23 @@ }; }; +&spi0 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&qup_spi0_default>; + cs-gpios = <&tlmm 3 GPIO_ACTIVE_LOW>; + + can@0 { + compatible = "microchip,mcp2517fd"; + reg = <0>; + clocks = <&clk40M>; + interrupts-extended = <&tlmm 104 IRQ_TYPE_LEVEL_LOW>; + spi-max-frequency = <10000000>; + vdd-supply = <&vdc_5v>; + xceiver-supply = <&vdc_5v>; + }; +}; + &spi2 { /* On Low speed expansion */ label = "LS-SPI0"; @@ -1051,6 +1075,7 @@ vdd-3.3-ch0-supply = <&vreg_l25a_3p3>; qcom,snoc-host-cap-8bit-quirk; + qcom,ath10k-calibration-variant = "Thundercomm_DB845C"; }; /* PINCTRL - additions to nodes defined in sdm845.dtsi */ @@ -1219,3 +1244,11 @@ }; }; }; + +/* PINCTRL - additions to nodes defined in sdm845.dtsi */ +&qup_spi0_default { + config { + drive-strength = <6>; + bias-disable; + }; +}; diff --git a/arch/arm64/boot/dts/qcom/sdm845-xiaomi-beryllium.dts b/arch/arm64/boot/dts/qcom/sdm845-xiaomi-beryllium.dts index 367389526b41..d88dc07205f7 100644 --- a/arch/arm64/boot/dts/qcom/sdm845-xiaomi-beryllium.dts +++ b/arch/arm64/boot/dts/qcom/sdm845-xiaomi-beryllium.dts @@ -121,7 +121,7 @@ &adsp_pas { status = "okay"; - firmware-name = "qcom/sdm845/adsp.mdt"; + firmware-name = "qcom/sdm845/beryllium/adsp.mbn"; }; &apps_rsc { @@ -185,6 +185,12 @@ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; }; + vreg_l23a_3p3: ldo23 { + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3312000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + vreg_l24a_3p075: ldo24 { regulator-min-microvolt = <3088000>; regulator-max-microvolt = <3088000>; @@ -208,7 +214,7 @@ &cdsp_pas { status = "okay"; - firmware-name = "qcom/sdm845/cdsp.mdt"; + firmware-name = "qcom/sdm845/beryllium/cdsp.mbn"; }; &dsi0 { @@ -218,13 +224,14 @@ panel@0 { compatible = "tianma,fhd-video"; reg = <0>; - vddi0-supply = <&vreg_l14a_1p8>; + vddio-supply = <&vreg_l14a_1p8>; vddpos-supply = <&lab>; vddneg-supply = <&ibb>; #address-cells = <1>; #size-cells = <0>; + backlight = <&pmi8998_wled>; reset-gpios = <&tlmm 6 GPIO_ACTIVE_LOW>; port { @@ -262,7 +269,7 @@ zap-shader { memory-region = <&gpu_mem>; - firmware-name = "qcom/sdm845/a630_zap.mbn"; + firmware-name = "qcom/sdm845/beryllium/a630_zap.mbn"; }; }; @@ -289,7 +296,13 @@ &mss_pil { status = "okay"; - firmware-name = "qcom/sdm845/mba.mbn", "qcom/sdm845/modem.mdt"; + firmware-name = "qcom/sdm845/beryllium/mba.mbn", "qcom/sdm845/beryllium/modem.mbn"; +}; + +&ipa { + status = "okay"; + memory-region = <&ipa_fw_mem>; + firmware-name = "qcom/sdm845/beryllium/ipa_fws.mbn"; }; &pm8998_gpio { @@ -302,6 +315,17 @@ }; }; +&pmi8998_wled { + status = "okay"; + qcom,current-boost-limit = <970>; + qcom,ovp-millivolt = <29600>; + qcom,current-limit-microamp = <20000>; + qcom,num-strings = <2>; + qcom,switching-freq = <600>; + qcom,external-pfet; + qcom,cabc; +}; + &pm8998_pon { resin { compatible = "qcom,pm8941-resin"; @@ -541,6 +565,7 @@ vdd-1.8-xo-supply = <&vreg_l7a_1p8>; vdd-1.3-rfa-supply = <&vreg_l17a_1p3>; vdd-3.3-ch0-supply = <&vreg_l25a_3p3>; + vdd-3.3-ch1-supply = <&vreg_l23a_3p3>; }; /* PINCTRL - additions to nodes defined in sdm845.dtsi */ diff --git a/arch/arm64/boot/dts/qcom/sdm845.dtsi b/arch/arm64/boot/dts/qcom/sdm845.dtsi index b31bf62e8680..692cf4be4eef 100644 --- a/arch/arm64/boot/dts/qcom/sdm845.dtsi +++ b/arch/arm64/boot/dts/qcom/sdm845.dtsi @@ -200,8 +200,8 @@ cpu-idle-states = <&LITTLE_CPU_SLEEP_0 &LITTLE_CPU_SLEEP_1 &CLUSTER_SLEEP_0>; - capacity-dmips-mhz = <607>; - dynamic-power-coefficient = <100>; + capacity-dmips-mhz = <611>; + dynamic-power-coefficient = <290>; qcom,freq-domain = <&cpufreq_hw 0>; operating-points-v2 = <&cpu0_opp_table>; interconnects = <&gladiator_noc MASTER_APPSS_PROC 3 &mem_noc SLAVE_EBI1 3>, @@ -225,8 +225,8 @@ cpu-idle-states = <&LITTLE_CPU_SLEEP_0 &LITTLE_CPU_SLEEP_1 &CLUSTER_SLEEP_0>; - capacity-dmips-mhz = <607>; - dynamic-power-coefficient = <100>; + capacity-dmips-mhz = <611>; + dynamic-power-coefficient = <290>; qcom,freq-domain = <&cpufreq_hw 0>; operating-points-v2 = <&cpu0_opp_table>; interconnects = <&gladiator_noc MASTER_APPSS_PROC 3 &mem_noc SLAVE_EBI1 3>, @@ -247,8 +247,8 @@ cpu-idle-states = <&LITTLE_CPU_SLEEP_0 &LITTLE_CPU_SLEEP_1 &CLUSTER_SLEEP_0>; - capacity-dmips-mhz = <607>; - dynamic-power-coefficient = <100>; + capacity-dmips-mhz = <611>; + dynamic-power-coefficient = <290>; qcom,freq-domain = <&cpufreq_hw 0>; operating-points-v2 = <&cpu0_opp_table>; interconnects = <&gladiator_noc MASTER_APPSS_PROC 3 &mem_noc SLAVE_EBI1 3>, @@ -269,8 +269,8 @@ cpu-idle-states = <&LITTLE_CPU_SLEEP_0 &LITTLE_CPU_SLEEP_1 &CLUSTER_SLEEP_0>; - capacity-dmips-mhz = <607>; - dynamic-power-coefficient = <100>; + capacity-dmips-mhz = <611>; + dynamic-power-coefficient = <290>; qcom,freq-domain = <&cpufreq_hw 0>; operating-points-v2 = <&cpu0_opp_table>; interconnects = <&gladiator_noc MASTER_APPSS_PROC 3 &mem_noc SLAVE_EBI1 3>, @@ -292,7 +292,7 @@ cpu-idle-states = <&BIG_CPU_SLEEP_0 &BIG_CPU_SLEEP_1 &CLUSTER_SLEEP_0>; - dynamic-power-coefficient = <396>; + dynamic-power-coefficient = <442>; qcom,freq-domain = <&cpufreq_hw 1>; operating-points-v2 = <&cpu4_opp_table>; interconnects = <&gladiator_noc MASTER_APPSS_PROC 3 &mem_noc SLAVE_EBI1 3>, @@ -314,7 +314,7 @@ cpu-idle-states = <&BIG_CPU_SLEEP_0 &BIG_CPU_SLEEP_1 &CLUSTER_SLEEP_0>; - dynamic-power-coefficient = <396>; + dynamic-power-coefficient = <442>; qcom,freq-domain = <&cpufreq_hw 1>; operating-points-v2 = <&cpu4_opp_table>; interconnects = <&gladiator_noc MASTER_APPSS_PROC 3 &mem_noc SLAVE_EBI1 3>, @@ -336,7 +336,7 @@ cpu-idle-states = <&BIG_CPU_SLEEP_0 &BIG_CPU_SLEEP_1 &CLUSTER_SLEEP_0>; - dynamic-power-coefficient = <396>; + dynamic-power-coefficient = <442>; qcom,freq-domain = <&cpufreq_hw 1>; operating-points-v2 = <&cpu4_opp_table>; interconnects = <&gladiator_noc MASTER_APPSS_PROC 3 &mem_noc SLAVE_EBI1 3>, @@ -358,7 +358,7 @@ cpu-idle-states = <&BIG_CPU_SLEEP_0 &BIG_CPU_SLEEP_1 &CLUSTER_SLEEP_0>; - dynamic-power-coefficient = <396>; + dynamic-power-coefficient = <442>; qcom,freq-domain = <&cpufreq_hw 1>; operating-points-v2 = <&cpu4_opp_table>; interconnects = <&gladiator_noc MASTER_APPSS_PROC 3 &mem_noc SLAVE_EBI1 3>, @@ -2027,7 +2027,7 @@ }; pcie0: pci@1c00000 { - compatible = "qcom,pcie-sdm845", "snps,dw-pcie"; + compatible = "qcom,pcie-sdm845"; reg = <0 0x01c00000 0 0x2000>, <0 0x60000000 0 0xf1d>, <0 0x60000f20 0 0xa8>, @@ -2132,7 +2132,7 @@ }; pcie1: pci@1c08000 { - compatible = "qcom,pcie-sdm845", "snps,dw-pcie"; + compatible = "qcom,pcie-sdm845"; reg = <0 0x01c08000 0 0x2000>, <0 0x40000000 0 0xf1d>, <0 0x40000f20 0 0xa8>, @@ -4283,7 +4283,7 @@ power-domains = <&rpmhpd SDM845_CX>; interrupt-parent = <&mdss>; - interrupts = <0 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <0>; ports { #address-cells = <1>; @@ -4335,7 +4335,7 @@ reg-names = "dsi_ctrl"; interrupt-parent = <&mdss>; - interrupts = <4 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <4>; clocks = <&dispcc DISP_CC_MDSS_BYTE0_CLK>, <&dispcc DISP_CC_MDSS_BYTE0_INTF_CLK>, @@ -4407,7 +4407,7 @@ reg-names = "dsi_ctrl"; interrupt-parent = <&mdss>; - interrupts = <5 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <5>; clocks = <&dispcc DISP_CC_MDSS_BYTE1_CLK>, <&dispcc DISP_CC_MDSS_BYTE1_INTF_CLK>, diff --git a/arch/arm64/boot/dts/qcom/sm6350.dtsi b/arch/arm64/boot/dts/qcom/sm6350.dtsi index d7c9edff19f7..fb1a0f662575 100644 --- a/arch/arm64/boot/dts/qcom/sm6350.dtsi +++ b/arch/arm64/boot/dts/qcom/sm6350.dtsi @@ -517,6 +517,45 @@ }; }; + qupv3_id_0: geniqup@8c0000 { + compatible = "qcom,geni-se-qup"; + reg = <0x0 0x8c0000 0x0 0x2000>; + clock-names = "m-ahb", "s-ahb"; + clocks = <&gcc GCC_QUPV3_WRAP_0_M_AHB_CLK>, + <&gcc GCC_QUPV3_WRAP_0_S_AHB_CLK>; + #address-cells = <2>; + #size-cells = <2>; + iommus = <&apps_smmu 0x43 0x0>; + ranges; + status = "disabled"; + + i2c0: i2c@880000 { + compatible = "qcom,geni-i2c"; + reg = <0 0x00880000 0 0x4000>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP0_S0_CLK>; + pinctrl-names = "default"; + pinctrl-0 = <&qup_i2c0_default>; + interrupts = <GIC_SPI 601 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + i2c2: i2c@888000 { + compatible = "qcom,geni-i2c"; + reg = <0 0x00888000 0 0x4000>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP0_S2_CLK>; + pinctrl-names = "default"; + pinctrl-0 = <&qup_i2c2_default>; + interrupts = <GIC_SPI 603 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + }; + qupv3_id_1: geniqup@9c0000 { compatible = "qcom,geni-se-qup"; reg = <0x0 0x9c0000 0x0 0x2000>; @@ -529,16 +568,146 @@ ranges; status = "disabled"; - uart2: serial@98c000 { + i2c6: i2c@980000 { + compatible = "qcom,geni-i2c"; + reg = <0 0x00980000 0 0x4000>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP1_S0_CLK>; + pinctrl-names = "default"; + pinctrl-0 = <&qup_i2c6_default>; + interrupts = <GIC_SPI 353 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + i2c7: i2c@984000 { + compatible = "qcom,geni-i2c"; + reg = <0 0x00984000 0 0x4000>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP1_S1_CLK>; + pinctrl-names = "default"; + pinctrl-0 = <&qup_i2c7_default>; + interrupts = <GIC_SPI 354 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + i2c8: i2c@988000 { + compatible = "qcom,geni-i2c"; + reg = <0 0x00988000 0 0x4000>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP1_S2_CLK>; + pinctrl-names = "default"; + pinctrl-0 = <&qup_i2c8_default>; + interrupts = <GIC_SPI 355 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + uart9: serial@98c000 { compatible = "qcom,geni-debug-uart"; reg = <0 0x98c000 0 0x4000>; clock-names = "se"; clocks = <&gcc GCC_QUPV3_WRAP1_S3_CLK>; pinctrl-names = "default"; - pinctrl-0 = <&qup_uart2_default>; + pinctrl-0 = <&qup_uart9_default>; interrupts = <GIC_SPI 356 IRQ_TYPE_LEVEL_HIGH>; status = "disabled"; }; + + i2c10: i2c@990000 { + compatible = "qcom,geni-i2c"; + reg = <0 0x00990000 0 0x4000>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP1_S4_CLK>; + pinctrl-names = "default"; + pinctrl-0 = <&qup_i2c10_default>; + interrupts = <GIC_SPI 357 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + }; + + ufs_mem_hc: ufs@1d84000 { + compatible = "qcom,sm6350-ufshc", "qcom,ufshc", + "jedec,ufs-2.0"; + reg = <0 0x01d84000 0 0x3000>, + <0 0x01d90000 0 0x8000>; + reg-names = "std", "ice"; + interrupts = <GIC_SPI 265 IRQ_TYPE_LEVEL_HIGH>; + phys = <&ufs_mem_phy_lanes>; + phy-names = "ufsphy"; + lanes-per-direction = <2>; + #reset-cells = <1>; + resets = <&gcc GCC_UFS_PHY_BCR>; + reset-names = "rst"; + + power-domains = <&gcc UFS_PHY_GDSC>; + + iommus = <&apps_smmu 0x80 0x0>; + + clock-names = "core_clk", + "bus_aggr_clk", + "iface_clk", + "core_clk_unipro", + "ref_clk", + "tx_lane0_sync_clk", + "rx_lane0_sync_clk", + "rx_lane1_sync_clk", + "ice_core_clk"; + clocks = <&gcc GCC_UFS_PHY_AXI_CLK>, + <&gcc GCC_AGGRE_UFS_PHY_AXI_CLK>, + <&gcc GCC_UFS_PHY_AHB_CLK>, + <&gcc GCC_UFS_PHY_UNIPRO_CORE_CLK>, + <&rpmhcc RPMH_QLINK_CLK>, + <&gcc GCC_UFS_PHY_TX_SYMBOL_0_CLK>, + <&gcc GCC_UFS_PHY_RX_SYMBOL_0_CLK>, + <&gcc GCC_UFS_PHY_RX_SYMBOL_1_CLK>, + <&gcc GCC_UFS_PHY_ICE_CORE_CLK>; + freq-table-hz = + <50000000 200000000>, + <0 0>, + <0 0>, + <37500000 150000000>, + <75000000 300000000>, + <0 0>, + <0 0>, + <0 0>, + <0 0>; + + status = "disabled"; + }; + + ufs_mem_phy: phy@1d87000 { + compatible = "qcom,sm6350-qmp-ufs-phy"; + reg = <0 0x01d87000 0 0x18c>; + #address-cells = <2>; + #size-cells = <2>; + ranges; + + clock-names = "ref", + "ref_aux"; + clocks = <&gcc GCC_UFS_MEM_CLKREF_CLK>, + <&gcc GCC_UFS_PHY_PHY_AUX_CLK>; + + resets = <&ufs_mem_hc 0>; + reset-names = "ufsphy"; + + status = "disabled"; + + ufs_mem_phy_lanes: phy@1d87400 { + reg = <0 0x01d87400 0 0x128>, + <0 0x01d87600 0 0x1fc>, + <0 0x01d87c00 0 0x1dc>, + <0 0x01d87800 0 0x128>, + <0 0x01d87a00 0 0x1fc>; + #phy-cells = <0>; + }; }; tcsr_mutex: hwlock@1f40000 { @@ -974,12 +1143,54 @@ #interrupt-cells = <2>; gpio-ranges = <&tlmm 0 0 157>; - qup_uart2_default: qup-uart2-default { + qup_uart9_default: qup-uart9-default { pins = "gpio25", "gpio26"; function = "qup13_f2"; drive-strength = <2>; bias-disable; }; + + qup_i2c0_default: qup-i2c0-default { + pins = "gpio0", "gpio1"; + function = "qup00"; + drive-strength = <2>; + bias-pull-up; + }; + + qup_i2c2_default: qup-i2c2-default { + pins = "gpio45", "gpio46"; + function = "qup02"; + drive-strength = <2>; + bias-pull-up; + }; + + qup_i2c6_default: qup-i2c6-default { + pins = "gpio13", "gpio14"; + function = "qup10"; + drive-strength = <2>; + bias-pull-up; + }; + + qup_i2c7_default: qup-i2c7-default { + pins = "gpio27", "gpio28"; + function = "qup11"; + drive-strength = <2>; + bias-pull-up; + }; + + qup_i2c8_default: qup-i2c8-default { + pins = "gpio19", "gpio20"; + function = "qup12"; + drive-strength = <2>; + bias-pull-up; + }; + + qup_i2c10_default: qup-i2c10-default { + pins = "gpio4", "gpio5"; + function = "qup14"; + drive-strength = <2>; + bias-pull-up; + }; }; apps_smmu: iommu@15000000 { @@ -1145,6 +1356,28 @@ }; }; + wifi: wifi@18800000 { + compatible = "qcom,wcn3990-wifi"; + reg = <0 0x18800000 0 0x800000>; + reg-names = "membase"; + memory-region = <&wlan_fw_mem>; + interrupts = <GIC_SPI 414 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 415 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 416 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 417 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 418 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 419 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 420 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 421 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 422 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 423 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 424 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 425 IRQ_TYPE_LEVEL_HIGH>; + iommus = <&apps_smmu 0x20 0x1>; + qcom,msa-fixed-perm; + status = "disabled"; + }; + apps_rsc: rsc@18200000 { compatible = "qcom,rpmh-rsc"; label = "apps_rsc"; @@ -1217,7 +1450,7 @@ }; }; - apps_bcm_voter: bcm_voter { + apps_bcm_voter: bcm-voter { compatible = "qcom,bcm-voter"; }; }; diff --git a/arch/arm64/boot/dts/qcom/sm7225-fairphone-fp4.dts b/arch/arm64/boot/dts/qcom/sm7225-fairphone-fp4.dts index adb6ca2be2a5..61925216f5e3 100644 --- a/arch/arm64/boot/dts/qcom/sm7225-fairphone-fp4.dts +++ b/arch/arm64/boot/dts/qcom/sm7225-fairphone-fp4.dts @@ -23,7 +23,7 @@ qcom,board-id = <8 32>; aliases { - serial0 = &uart2; + serial0 = &uart9; }; chosen { @@ -296,6 +296,35 @@ firmware-name = "qcom/sm7225/fairphone4/cdsp.mdt"; }; +&i2c10 { + status = "okay"; + clock-frequency = <400000>; + + haptics@5a { + compatible = "awinic,aw8695"; + reg = <0x5a>; + interrupts-extended = <&tlmm 85 IRQ_TYPE_EDGE_FALLING>; + reset-gpios = <&tlmm 90 GPIO_ACTIVE_HIGH>; + + awinic,f0-preset = <2350>; + awinic,f0-coefficient = <260>; + awinic,f0-calibration-percent = <7>; + awinic,drive-level = <125>; + + awinic,f0-detection-play-time = <5>; + awinic,f0-detection-wait-time = <3>; + awinic,f0-detection-repeat = <2>; + awinic,f0-detection-trace = <15>; + + awinic,boost-debug = /bits/ 8 <0x30 0xeb 0xd4>; + awinic,tset = /bits/ 8 <0x12>; + awinic,r-spare = /bits/ 8 <0x68>; + + awinic,bemf-upper-threshold = <4104>; + awinic,bemf-lower-threshold = <1016>; + }; +}; + &mpss { status = "okay"; firmware-name = "qcom/sm7225/fairphone4/modem.mdt"; @@ -332,10 +361,28 @@ gpio-reserved-ranges = <13 4>, <56 2>; }; -&uart2 { +&uart9 { status = "okay"; }; +&ufs_mem_hc { + status = "okay"; + + reset-gpios = <&tlmm 156 GPIO_ACTIVE_LOW>; + + vcc-supply = <&vreg_l7e>; + vcc-max-microamp = <800000>; + vccq2-supply = <&vreg_l12a>; + vccq2-max-microamp = <800000>; +}; + +&ufs_mem_phy { + status = "okay"; + + vdda-phy-supply = <&vreg_l18a>; + vdda-pll-supply = <&vreg_l22a>; +}; + &usb_1 { status = "okay"; }; @@ -359,3 +406,13 @@ vdda-phy-supply = <&vreg_l22a>; vdda-pll-supply = <&vreg_l16a>; }; + +&wifi { + status = "okay"; + + vdd-0.8-cx-mx-supply = <&vreg_l4a>; + vdd-1.8-xo-supply = <&vreg_l7a>; + vdd-1.3-rfa-supply = <&vreg_l2e>; + vdd-3.3-ch0-supply = <&vreg_l10e>; + vdd-3.3-ch1-supply = <&vreg_l11e>; +}; diff --git a/arch/arm64/boot/dts/qcom/sm8150.dtsi b/arch/arm64/boot/dts/qcom/sm8150.dtsi index 15f3bf2e7ea0..f70ae4c56762 100644 --- a/arch/arm64/boot/dts/qcom/sm8150.dtsi +++ b/arch/arm64/boot/dts/qcom/sm8150.dtsi @@ -915,6 +915,33 @@ status = "disabled"; }; + ethernet: ethernet@20000 { + compatible = "qcom,sm8150-ethqos"; + reg = <0x0 0x00020000 0x0 0x10000>, + <0x0 0x00036000 0x0 0x100>; + reg-names = "stmmaceth", "rgmii"; + clock-names = "stmmaceth", "pclk", "ptp_ref", "rgmii"; + clocks = <&gcc GCC_EMAC_AXI_CLK>, + <&gcc GCC_EMAC_SLV_AHB_CLK>, + <&gcc GCC_EMAC_PTP_CLK>, + <&gcc GCC_EMAC_RGMII_CLK>; + interrupts = <GIC_SPI 689 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 699 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "macirq", "eth_lpi"; + + power-domains = <&gcc EMAC_GDSC>; + resets = <&gcc GCC_EMAC_BCR>; + + iommus = <&apps_smmu 0x3C0 0x0>; + + snps,tso; + rx-fifo-depth = <4096>; + tx-fifo-depth = <4096>; + + status = "disabled"; + }; + + qupv3_id_0: geniqup@8c0000 { compatible = "qcom,geni-se-qup"; reg = <0x0 0x008c0000 0x0 0x6000>; @@ -1746,6 +1773,203 @@ interrupts = <GIC_SPI 582 IRQ_TYPE_LEVEL_HIGH>; }; + pcie0: pci@1c00000 { + compatible = "qcom,pcie-sm8150", "snps,dw-pcie"; + reg = <0 0x01c00000 0 0x3000>, + <0 0x60000000 0 0xf1d>, + <0 0x60000f20 0 0xa8>, + <0 0x60001000 0 0x1000>, + <0 0x60100000 0 0x100000>; + reg-names = "parf", "dbi", "elbi", "atu", "config"; + device_type = "pci"; + linux,pci-domain = <0>; + bus-range = <0x00 0xff>; + num-lanes = <1>; + + #address-cells = <3>; + #size-cells = <2>; + + ranges = <0x01000000 0x0 0x60200000 0 0x60200000 0x0 0x100000>, + <0x02000000 0x0 0x60300000 0 0x60300000 0x0 0x3d00000>; + + interrupts = <GIC_SPI 141 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "msi"; + #interrupt-cells = <1>; + interrupt-map-mask = <0 0 0 0x7>; + interrupt-map = <0 0 0 1 &intc 0 149 IRQ_TYPE_LEVEL_HIGH>, /* int_a */ + <0 0 0 2 &intc 0 150 IRQ_TYPE_LEVEL_HIGH>, /* int_b */ + <0 0 0 3 &intc 0 151 IRQ_TYPE_LEVEL_HIGH>, /* int_c */ + <0 0 0 4 &intc 0 152 IRQ_TYPE_LEVEL_HIGH>; /* int_d */ + + clocks = <&gcc GCC_PCIE_0_PIPE_CLK>, + <&gcc GCC_PCIE_0_AUX_CLK>, + <&gcc GCC_PCIE_0_CFG_AHB_CLK>, + <&gcc GCC_PCIE_0_MSTR_AXI_CLK>, + <&gcc GCC_PCIE_0_SLV_AXI_CLK>, + <&gcc GCC_PCIE_0_SLV_Q2A_AXI_CLK>, + <&gcc GCC_AGGRE_NOC_PCIE_TBU_CLK>; + clock-names = "pipe", + "aux", + "cfg", + "bus_master", + "bus_slave", + "slave_q2a", + "tbu"; + + iommus = <&apps_smmu 0x1d80 0x7f>; + iommu-map = <0x0 &apps_smmu 0x1d80 0x1>, + <0x100 &apps_smmu 0x1d81 0x1>; + + resets = <&gcc GCC_PCIE_0_BCR>; + reset-names = "pci"; + + power-domains = <&gcc PCIE_0_GDSC>; + + phys = <&pcie0_lane>; + phy-names = "pciephy"; + + perst-gpio = <&tlmm 35 GPIO_ACTIVE_HIGH>; + enable-gpio = <&tlmm 37 GPIO_ACTIVE_HIGH>; + + pinctrl-names = "default"; + pinctrl-0 = <&pcie0_default_state>; + + status = "disabled"; + }; + + pcie0_phy: phy@1c06000 { + compatible = "qcom,sm8150-qmp-gen3x1-pcie-phy"; + reg = <0 0x01c06000 0 0x1c0>; + #address-cells = <2>; + #size-cells = <2>; + ranges; + clocks = <&gcc GCC_PCIE_PHY_AUX_CLK>, + <&gcc GCC_PCIE_0_CFG_AHB_CLK>, + <&gcc GCC_PCIE0_PHY_REFGEN_CLK>; + clock-names = "aux", "cfg_ahb", "refgen"; + + resets = <&gcc GCC_PCIE_0_PHY_BCR>; + reset-names = "phy"; + + assigned-clocks = <&gcc GCC_PCIE0_PHY_REFGEN_CLK>; + assigned-clock-rates = <100000000>; + + status = "disabled"; + + pcie0_lane: phy@1c06200 { + reg = <0 0x1c06200 0 0x170>, /* tx */ + <0 0x1c06400 0 0x200>, /* rx */ + <0 0x1c06800 0 0x1f0>, /* pcs */ + <0 0x1c06c00 0 0xf4>; /* "pcs_lane" same as pcs_misc? */ + clocks = <&gcc GCC_PCIE_0_PIPE_CLK>; + clock-names = "pipe0"; + + #phy-cells = <0>; + clock-output-names = "pcie_0_pipe_clk"; + }; + }; + + pcie1: pci@1c08000 { + compatible = "qcom,pcie-sm8150", "snps,dw-pcie"; + reg = <0 0x01c08000 0 0x3000>, + <0 0x40000000 0 0xf1d>, + <0 0x40000f20 0 0xa8>, + <0 0x40001000 0 0x1000>, + <0 0x40100000 0 0x100000>; + reg-names = "parf", "dbi", "elbi", "atu", "config"; + device_type = "pci"; + linux,pci-domain = <1>; + bus-range = <0x00 0xff>; + num-lanes = <2>; + + #address-cells = <3>; + #size-cells = <2>; + + ranges = <0x01000000 0x0 0x40200000 0x0 0x40200000 0x0 0x100000>, + <0x02000000 0x0 0x40300000 0x0 0x40300000 0x0 0x1fd00000>; + + interrupts = <GIC_SPI 307 IRQ_TYPE_EDGE_RISING>; + interrupt-names = "msi"; + #interrupt-cells = <1>; + interrupt-map-mask = <0 0 0 0x7>; + interrupt-map = <0 0 0 1 &intc 0 434 IRQ_TYPE_LEVEL_HIGH>, /* int_a */ + <0 0 0 2 &intc 0 435 IRQ_TYPE_LEVEL_HIGH>, /* int_b */ + <0 0 0 3 &intc 0 438 IRQ_TYPE_LEVEL_HIGH>, /* int_c */ + <0 0 0 4 &intc 0 439 IRQ_TYPE_LEVEL_HIGH>; /* int_d */ + + clocks = <&gcc GCC_PCIE_1_PIPE_CLK>, + <&gcc GCC_PCIE_1_AUX_CLK>, + <&gcc GCC_PCIE_1_CFG_AHB_CLK>, + <&gcc GCC_PCIE_1_MSTR_AXI_CLK>, + <&gcc GCC_PCIE_1_SLV_AXI_CLK>, + <&gcc GCC_PCIE_1_SLV_Q2A_AXI_CLK>, + <&gcc GCC_AGGRE_NOC_PCIE_TBU_CLK>; + clock-names = "pipe", + "aux", + "cfg", + "bus_master", + "bus_slave", + "slave_q2a", + "tbu"; + + assigned-clocks = <&gcc GCC_PCIE_1_AUX_CLK>; + assigned-clock-rates = <19200000>; + + iommus = <&apps_smmu 0x1e00 0x7f>; + iommu-map = <0x0 &apps_smmu 0x1e00 0x1>, + <0x100 &apps_smmu 0x1e01 0x1>; + + resets = <&gcc GCC_PCIE_1_BCR>; + reset-names = "pci"; + + power-domains = <&gcc PCIE_1_GDSC>; + + phys = <&pcie1_lane>; + phy-names = "pciephy"; + + perst-gpio = <&tlmm 102 GPIO_ACTIVE_HIGH>; + enable-gpio = <&tlmm 104 GPIO_ACTIVE_HIGH>; + + pinctrl-names = "default"; + pinctrl-0 = <&pcie1_default_state>; + + status = "disabled"; + }; + + pcie1_phy: phy@1c0e000 { + compatible = "qcom,sm8150-qmp-gen3x2-pcie-phy"; + reg = <0 0x01c0e000 0 0x1c0>; + #address-cells = <2>; + #size-cells = <2>; + ranges; + clocks = <&gcc GCC_PCIE_PHY_AUX_CLK>, + <&gcc GCC_PCIE_1_CFG_AHB_CLK>, + <&gcc GCC_PCIE1_PHY_REFGEN_CLK>; + clock-names = "aux", "cfg_ahb", "refgen"; + + resets = <&gcc GCC_PCIE_1_PHY_BCR>; + reset-names = "phy"; + + assigned-clocks = <&gcc GCC_PCIE1_PHY_REFGEN_CLK>; + assigned-clock-rates = <100000000>; + + status = "disabled"; + + pcie1_lane: phy@1c0e200 { + reg = <0 0x1c0e200 0 0x170>, /* tx0 */ + <0 0x1c0e400 0 0x200>, /* rx0 */ + <0 0x1c0ea00 0 0x1f0>, /* pcs */ + <0 0x1c0e600 0 0x170>, /* tx1 */ + <0 0x1c0e800 0 0x200>, /* rx1 */ + <0 0x1c0ee00 0 0xf4>; /* "pcs_com" same as pcs_misc? */ + clocks = <&gcc GCC_PCIE_1_PIPE_CLK>; + clock-names = "pipe0"; + + #phy-cells = <0>; + clock-output-names = "pcie_1_pipe_clk"; + }; + }; + ufs_mem_hc: ufshc@1d84000 { compatible = "qcom,sm8150-ufshc", "qcom,ufshc", "jedec,ufs-2.0"; @@ -1807,6 +2031,8 @@ clocks = <&gcc GCC_UFS_MEM_CLKREF_CLK>, <&gcc GCC_UFS_PHY_PHY_AUX_CLK>; + power-domains = <&gcc UFS_PHY_GDSC>; + resets = <&ufs_mem_hc 0>; reset-names = "ufsphy"; status = "disabled"; @@ -2048,6 +2274,7 @@ #gpio-cells = <2>; interrupt-controller; #interrupt-cells = <2>; + wakeup-parent = <&pdc>; qup_i2c0_default: qup-i2c0-default { mux { @@ -2448,6 +2675,52 @@ drive-strength = <6>; bias-disable; }; + + pcie0_default_state: pcie0-default { + perst { + pins = "gpio35"; + function = "gpio"; + drive-strength = <2>; + bias-pull-down; + }; + + clkreq { + pins = "gpio36"; + function = "pci_e0"; + drive-strength = <2>; + bias-pull-up; + }; + + wake { + pins = "gpio37"; + function = "gpio"; + drive-strength = <2>; + bias-pull-up; + }; + }; + + pcie1_default_state: pcie1-default { + perst { + pins = "gpio102"; + function = "gpio"; + drive-strength = <2>; + bias-pull-down; + }; + + clkreq { + pins = "gpio103"; + function = "pci_e1"; + drive-strength = <2>; + bias-pull-up; + }; + + wake { + pins = "gpio104"; + function = "gpio"; + drive-strength = <2>; + bias-pull-up; + }; + }; }; remoteproc_mpss: remoteproc@4080000 { @@ -3270,6 +3543,51 @@ }; }; + sdhc_2: sdhci@8804000 { + compatible = "qcom,sm8150-sdhci", "qcom,sdhci-msm-v5"; + reg = <0 0x08804000 0 0x1000>; + + interrupts = <GIC_SPI 204 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 222 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "hc_irq", "pwr_irq"; + + clocks = <&gcc GCC_SDCC2_AHB_CLK>, + <&gcc GCC_SDCC2_APPS_CLK>, + <&rpmhcc RPMH_CXO_CLK>; + clock-names = "iface", "core", "xo"; + iommus = <&apps_smmu 0x6a0 0x0>; + qcom,dll-config = <0x0007642c>; + qcom,ddr-config = <0x80040868>; + power-domains = <&rpmhpd 0>; + operating-points-v2 = <&sdhc2_opp_table>; + + status = "disabled"; + + sdhc2_opp_table: sdhc2-opp-table { + compatible = "operating-points-v2"; + + opp-19200000 { + opp-hz = /bits/ 64 <19200000>; + required-opps = <&rpmhpd_opp_min_svs>; + }; + + opp-50000000 { + opp-hz = /bits/ 64 <50000000>; + required-opps = <&rpmhpd_opp_low_svs>; + }; + + opp-100000000 { + opp-hz = /bits/ 64 <100000000>; + required-opps = <&rpmhpd_opp_svs>; + }; + + opp-202000000 { + opp-hz = /bits/ 64 <202000000>; + required-opps = <&rpmhpd_opp_svs_l1>; + }; + }; + }; + dc_noc: interconnect@9160000 { compatible = "qcom,sm8150-dc-noc"; reg = <0 0x09160000 0 0x3200>; @@ -3381,6 +3699,16 @@ qcom,bcm-voters = <&apps_bcm_voter>; }; + pdc: interrupt-controller@b220000 { + compatible = "qcom,sm8150-pdc", "qcom,pdc"; + reg = <0 0x0b220000 0 0x400>; + qcom,pdc-ranges = <0 480 94>, <94 609 31>, + <125 63 1>; + #interrupt-cells = <2>; + interrupt-parent = <&intc>; + interrupt-controller; + }; + aoss_qmp: power-controller@c300000 { compatible = "qcom,sm8150-aoss-qmp"; reg = <0x0 0x0c300000 0x0 0x400>; @@ -3744,7 +4072,7 @@ }; }; - apps_bcm_voter: bcm_voter { + apps_bcm_voter: bcm-voter { compatible = "qcom,bcm-voter"; }; }; diff --git a/arch/arm64/boot/dts/qcom/sm8250-sony-xperia-edo.dtsi b/arch/arm64/boot/dts/qcom/sm8250-sony-xperia-edo.dtsi index d63f7a9bc4e9..e819b5b77363 100644 --- a/arch/arm64/boot/dts/qcom/sm8250-sony-xperia-edo.dtsi +++ b/arch/arm64/boot/dts/qcom/sm8250-sony-xperia-edo.dtsi @@ -441,7 +441,35 @@ status = "okay"; clock-frequency = <1000000>; - /* Dual Cirrus Logic CS35L41 amps @ 40, 41 */ + cs35l41_l: cs35l41@40 { + compatible = "cirrus,cs35l41"; + reg = <0x40>; + interrupt-parent = <&tlmm>; + interrupts = <11 IRQ_TYPE_LEVEL_LOW>; + reset-gpios = <&tlmm 10 GPIO_ACTIVE_HIGH>; + cirrus,boost-peak-milliamp = <4000>; + cirrus,boost-ind-nanohenry = <1000>; + cirrus,boost-cap-microfarad = <15>; + cirrus,asp-sdout-hiz = <3>; + cirrus,gpio2-src-select = <2>; + cirrus,gpio2-output-enable; + #sound-dai-cells = <1>; + }; + + cs35l41_r: cs35l41@41 { + compatible = "cirrus,cs35l41"; + reg = <0x41>; + interrupt-parent = <&tlmm>; + interrupts = <11 IRQ_TYPE_LEVEL_LOW>; + reset-gpios = <&tlmm 10 GPIO_ACTIVE_HIGH>; + cirrus,boost-peak-milliamp = <4000>; + cirrus,boost-ind-nanohenry = <1000>; + cirrus,boost-cap-microfarad = <15>; + cirrus,asp-sdout-hiz = <3>; + cirrus,gpio2-src-select = <2>; + cirrus,gpio2-output-enable; + #sound-dai-cells = <1>; + }; }; &i2c5 { diff --git a/arch/arm64/boot/dts/qcom/sm8250.dtsi b/arch/arm64/boot/dts/qcom/sm8250.dtsi index 1304b86af1a0..dc2562070336 100644 --- a/arch/arm64/boot/dts/qcom/sm8250.dtsi +++ b/arch/arm64/boot/dts/qcom/sm8250.dtsi @@ -18,6 +18,7 @@ #include <dt-bindings/soc/qcom,rpmh-rsc.h> #include <dt-bindings/sound/qcom,q6afe.h> #include <dt-bindings/thermal/thermal.h> +#include <dt-bindings/clock/qcom,camcc-sm8250.h> #include <dt-bindings/clock/qcom,videocc-sm8250.h> / { @@ -3153,6 +3154,256 @@ #power-domain-cells = <1>; }; + cci0: cci@ac4f000 { + compatible = "qcom,sm8250-cci"; + #address-cells = <1>; + #size-cells = <0>; + + reg = <0 0x0ac4f000 0 0x1000>; + interrupts = <GIC_SPI 460 IRQ_TYPE_EDGE_RISING>; + power-domains = <&camcc TITAN_TOP_GDSC>; + + clocks = <&camcc CAM_CC_CAMNOC_AXI_CLK>, + <&camcc CAM_CC_SLOW_AHB_CLK_SRC>, + <&camcc CAM_CC_CPAS_AHB_CLK>, + <&camcc CAM_CC_CCI_0_CLK>, + <&camcc CAM_CC_CCI_0_CLK_SRC>; + clock-names = "camnoc_axi", + "slow_ahb_src", + "cpas_ahb", + "cci", + "cci_src"; + + pinctrl-0 = <&cci0_default>; + pinctrl-1 = <&cci0_sleep>; + pinctrl-names = "default", "sleep"; + + status = "disabled"; + + cci0_i2c0: i2c-bus@0 { + reg = <0>; + clock-frequency = <1000000>; + #address-cells = <1>; + #size-cells = <0>; + }; + + cci0_i2c1: i2c-bus@1 { + reg = <1>; + clock-frequency = <1000000>; + #address-cells = <1>; + #size-cells = <0>; + }; + }; + + cci1: cci@ac50000 { + compatible = "qcom,sm8250-cci"; + #address-cells = <1>; + #size-cells = <0>; + + reg = <0 0x0ac50000 0 0x1000>; + interrupts = <GIC_SPI 271 IRQ_TYPE_EDGE_RISING>; + power-domains = <&camcc TITAN_TOP_GDSC>; + + clocks = <&camcc CAM_CC_CAMNOC_AXI_CLK>, + <&camcc CAM_CC_SLOW_AHB_CLK_SRC>, + <&camcc CAM_CC_CPAS_AHB_CLK>, + <&camcc CAM_CC_CCI_1_CLK>, + <&camcc CAM_CC_CCI_1_CLK_SRC>; + clock-names = "camnoc_axi", + "slow_ahb_src", + "cpas_ahb", + "cci", + "cci_src"; + + pinctrl-0 = <&cci1_default>; + pinctrl-1 = <&cci1_sleep>; + pinctrl-names = "default", "sleep"; + + status = "disabled"; + + cci1_i2c0: i2c-bus@0 { + reg = <0>; + clock-frequency = <1000000>; + #address-cells = <1>; + #size-cells = <0>; + }; + + cci1_i2c1: i2c-bus@1 { + reg = <1>; + clock-frequency = <1000000>; + #address-cells = <1>; + #size-cells = <0>; + }; + }; + + camss: camss@ac6a000 { + compatible = "qcom,sm8250-camss"; + status = "disabled"; + + reg = <0 0xac6a000 0 0x2000>, + <0 0xac6c000 0 0x2000>, + <0 0xac6e000 0 0x1000>, + <0 0xac70000 0 0x1000>, + <0 0xac72000 0 0x1000>, + <0 0xac74000 0 0x1000>, + <0 0xacb4000 0 0xd000>, + <0 0xacc3000 0 0xd000>, + <0 0xacd9000 0 0x2200>, + <0 0xacdb200 0 0x2200>; + reg-names = "csiphy0", + "csiphy1", + "csiphy2", + "csiphy3", + "csiphy4", + "csiphy5", + "vfe0", + "vfe1", + "vfe_lite0", + "vfe_lite1"; + + interrupts = <GIC_SPI 477 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 478 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 479 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 448 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 464 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 466 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 468 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 359 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 465 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 467 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 469 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 360 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "csiphy0", + "csiphy1", + "csiphy2", + "csiphy3", + "csiphy4", + "csiphy5", + "csid0", + "csid1", + "csid2", + "csid3", + "vfe0", + "vfe1", + "vfe_lite0", + "vfe_lite1"; + + power-domains = <&camcc IFE_0_GDSC>, + <&camcc IFE_1_GDSC>, + <&camcc TITAN_TOP_GDSC>; + + clocks = <&gcc GCC_CAMERA_AHB_CLK>, + <&gcc GCC_CAMERA_HF_AXI_CLK>, + <&gcc GCC_CAMERA_SF_AXI_CLK>, + <&camcc CAM_CC_CAMNOC_AXI_CLK>, + <&camcc CAM_CC_CAMNOC_AXI_CLK_SRC>, + <&camcc CAM_CC_CORE_AHB_CLK>, + <&camcc CAM_CC_CPAS_AHB_CLK>, + <&camcc CAM_CC_CSIPHY0_CLK>, + <&camcc CAM_CC_CSI0PHYTIMER_CLK>, + <&camcc CAM_CC_CSIPHY1_CLK>, + <&camcc CAM_CC_CSI1PHYTIMER_CLK>, + <&camcc CAM_CC_CSIPHY2_CLK>, + <&camcc CAM_CC_CSI2PHYTIMER_CLK>, + <&camcc CAM_CC_CSIPHY3_CLK>, + <&camcc CAM_CC_CSI3PHYTIMER_CLK>, + <&camcc CAM_CC_CSIPHY4_CLK>, + <&camcc CAM_CC_CSI4PHYTIMER_CLK>, + <&camcc CAM_CC_CSIPHY5_CLK>, + <&camcc CAM_CC_CSI5PHYTIMER_CLK>, + <&camcc CAM_CC_SLOW_AHB_CLK_SRC>, + <&camcc CAM_CC_IFE_0_AHB_CLK>, + <&camcc CAM_CC_IFE_0_AXI_CLK>, + <&camcc CAM_CC_IFE_0_CLK>, + <&camcc CAM_CC_IFE_0_CPHY_RX_CLK>, + <&camcc CAM_CC_IFE_0_CSID_CLK>, + <&camcc CAM_CC_IFE_0_AREG_CLK>, + <&camcc CAM_CC_IFE_1_AHB_CLK>, + <&camcc CAM_CC_IFE_1_AXI_CLK>, + <&camcc CAM_CC_IFE_1_CLK>, + <&camcc CAM_CC_IFE_1_CPHY_RX_CLK>, + <&camcc CAM_CC_IFE_1_CSID_CLK>, + <&camcc CAM_CC_IFE_1_AREG_CLK>, + <&camcc CAM_CC_IFE_LITE_AHB_CLK>, + <&camcc CAM_CC_IFE_LITE_AXI_CLK>, + <&camcc CAM_CC_IFE_LITE_CLK>, + <&camcc CAM_CC_IFE_LITE_CPHY_RX_CLK>, + <&camcc CAM_CC_IFE_LITE_CSID_CLK>; + + clock-names = "cam_ahb_clk", + "cam_hf_axi", + "cam_sf_axi", + "camnoc_axi", + "camnoc_axi_src", + "core_ahb", + "cpas_ahb", + "csiphy0", + "csiphy0_timer", + "csiphy1", + "csiphy1_timer", + "csiphy2", + "csiphy2_timer", + "csiphy3", + "csiphy3_timer", + "csiphy4", + "csiphy4_timer", + "csiphy5", + "csiphy5_timer", + "slow_ahb_src", + "vfe0_ahb", + "vfe0_axi", + "vfe0", + "vfe0_cphy_rx", + "vfe0_csid", + "vfe0_areg", + "vfe1_ahb", + "vfe1_axi", + "vfe1", + "vfe1_cphy_rx", + "vfe1_csid", + "vfe1_areg", + "vfe_lite_ahb", + "vfe_lite_axi", + "vfe_lite", + "vfe_lite_cphy_rx", + "vfe_lite_csid"; + + iommus = <&apps_smmu 0x800 0x400>, + <&apps_smmu 0x801 0x400>, + <&apps_smmu 0x840 0x400>, + <&apps_smmu 0x841 0x400>, + <&apps_smmu 0xc00 0x400>, + <&apps_smmu 0xc01 0x400>, + <&apps_smmu 0xc40 0x400>, + <&apps_smmu 0xc41 0x400>; + + interconnects = <&gem_noc MASTER_AMPSS_M0 &config_noc SLAVE_CAMERA_CFG>, + <&mmss_noc MASTER_CAMNOC_HF &mc_virt SLAVE_EBI_CH0>, + <&mmss_noc MASTER_CAMNOC_SF &mc_virt SLAVE_EBI_CH0>, + <&mmss_noc MASTER_CAMNOC_ICP &mc_virt SLAVE_EBI_CH0>; + interconnect-names = "cam_ahb", + "cam_hf_0_mnoc", + "cam_sf_0_mnoc", + "cam_sf_icp_mnoc"; + }; + + camcc: clock-controller@ad00000 { + compatible = "qcom,sm8250-camcc"; + reg = <0 0x0ad00000 0 0x10000>; + clocks = <&gcc GCC_CAMERA_AHB_CLK>, + <&rpmhcc RPMH_CXO_CLK>, + <&rpmhcc RPMH_CXO_CLK_A>, + <&sleep_clk>; + clock-names = "iface", "bi_tcxo", "bi_tcxo_ao", "sleep_clk"; + power-domains = <&rpmhpd SM8250_MMCX>; + required-opps = <&rpmhpd_opp_low_svs>; + #clock-cells = <1>; + #reset-cells = <1>; + #power-domain-cells = <1>; + }; + mdss: mdss@ae00000 { compatible = "qcom,sm8250-mdss"; reg = <0 0x0ae00000 0 0x1000>; @@ -3206,7 +3457,7 @@ power-domains = <&rpmhpd SM8250_MMCX>; interrupt-parent = <&mdss>; - interrupts = <0 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <0>; ports { #address-cells = <1>; @@ -3258,7 +3509,7 @@ reg-names = "dsi_ctrl"; interrupt-parent = <&mdss>; - interrupts = <4 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <4>; clocks = <&dispcc DISP_CC_MDSS_BYTE0_CLK>, <&dispcc DISP_CC_MDSS_BYTE0_INTF_CLK>, @@ -3331,7 +3582,7 @@ reg-names = "dsi_ctrl"; interrupt-parent = <&mdss>; - interrupts = <5 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <5>; clocks = <&dispcc DISP_CC_MDSS_BYTE1_CLK>, <&dispcc DISP_CC_MDSS_BYTE1_INTF_CLK>, @@ -3523,6 +3774,86 @@ gpio-ranges = <&tlmm 0 0 181>; wakeup-parent = <&pdc>; + cci0_default: cci0-default { + cci0_i2c0_default: cci0-i2c0-default { + /* SDA, SCL */ + pins = "gpio101", "gpio102"; + function = "cci_i2c"; + + bias-pull-up; + drive-strength = <2>; /* 2 mA */ + }; + + cci0_i2c1_default: cci0-i2c1-default { + /* SDA, SCL */ + pins = "gpio103", "gpio104"; + function = "cci_i2c"; + + bias-pull-up; + drive-strength = <2>; /* 2 mA */ + }; + }; + + cci0_sleep: cci0-sleep { + cci0_i2c0_sleep: cci0-i2c0-sleep { + /* SDA, SCL */ + pins = "gpio101", "gpio102"; + function = "cci_i2c"; + + drive-strength = <2>; /* 2 mA */ + bias-pull-down; + }; + + cci0_i2c1_sleep: cci0-i2c1-sleep { + /* SDA, SCL */ + pins = "gpio103", "gpio104"; + function = "cci_i2c"; + + drive-strength = <2>; /* 2 mA */ + bias-pull-down; + }; + }; + + cci1_default: cci1-default { + cci1_i2c0_default: cci1-i2c0-default { + /* SDA, SCL */ + pins = "gpio105","gpio106"; + function = "cci_i2c"; + + bias-pull-up; + drive-strength = <2>; /* 2 mA */ + }; + + cci1_i2c1_default: cci1-i2c1-default { + /* SDA, SCL */ + pins = "gpio107","gpio108"; + function = "cci_i2c"; + + bias-pull-up; + drive-strength = <2>; /* 2 mA */ + }; + }; + + cci1_sleep: cci1-sleep { + cci1_i2c0_sleep: cci1-i2c0-sleep { + /* SDA, SCL */ + pins = "gpio105","gpio106"; + function = "cci_i2c"; + + bias-pull-down; + drive-strength = <2>; /* 2 mA */ + }; + + cci1_i2c1_sleep: cci1-i2c1-sleep { + /* SDA, SCL */ + pins = "gpio107","gpio108"; + function = "cci_i2c"; + + bias-pull-down; + drive-strength = <2>; /* 2 mA */ + }; + }; + pri_mi2s_active: pri-mi2s-active { sclk { pins = "gpio138"; @@ -4658,7 +4989,7 @@ }; }; - apps_bcm_voter: bcm_voter { + apps_bcm_voter: bcm-voter { compatible = "qcom,bcm-voter"; }; }; diff --git a/arch/arm64/boot/dts/qcom/sm8350-hdk.dts b/arch/arm64/boot/dts/qcom/sm8350-hdk.dts index 1e5e9405d8b1..0fcf5bd88fc7 100644 --- a/arch/arm64/boot/dts/qcom/sm8350-hdk.dts +++ b/arch/arm64/boot/dts/qcom/sm8350-hdk.dts @@ -213,6 +213,10 @@ firmware-name = "qcom/sm8350/cdsp.mbn"; }; +&gpi_dma1 { + status = "okay"; +}; + &mpss { status = "okay"; firmware-name = "qcom/sm8350/modem.mbn"; diff --git a/arch/arm64/boot/dts/qcom/sm8350-microsoft-surface-duo2.dts b/arch/arm64/boot/dts/qcom/sm8350-microsoft-surface-duo2.dts index 9cb1d8455fd0..9a6faa9393dc 100644 --- a/arch/arm64/boot/dts/qcom/sm8350-microsoft-surface-duo2.dts +++ b/arch/arm64/boot/dts/qcom/sm8350-microsoft-surface-duo2.dts @@ -281,6 +281,14 @@ firmware-name = "qcom/sm8350/microsoft/cdsp.mbn"; }; +&i2c10 { + status = "okay"; +}; + +&i2c11 { + status = "okay"; +}; + &ipa { status = "okay"; @@ -296,6 +304,10 @@ status = "okay"; }; +&qupv3_id_1 { + status = "okay"; +}; + &slpi { status = "okay"; firmware-name = "qcom/sm8350/microsoft/slpi.mbn"; diff --git a/arch/arm64/boot/dts/qcom/sm8350.dtsi b/arch/arm64/boot/dts/qcom/sm8350.dtsi index 20f850b94158..c0137bdcf94b 100644 --- a/arch/arm64/boot/dts/qcom/sm8350.dtsi +++ b/arch/arm64/boot/dts/qcom/sm8350.dtsi @@ -6,6 +6,7 @@ #include <dt-bindings/interrupt-controller/arm-gic.h> #include <dt-bindings/clock/qcom,gcc-sm8350.h> #include <dt-bindings/clock/qcom,rpmh.h> +#include <dt-bindings/dma/qcom-gpi.h> #include <dt-bindings/gpio/gpio.h> #include <dt-bindings/interconnect/qcom,sm8350.h> #include <dt-bindings/mailbox/qcom-ipcc.h> @@ -675,6 +676,28 @@ }; }; + gpi_dma2: dma-controller@800000 { + compatible = "qcom,sm8350-gpi-dma"; + reg = <0 0x00800000 0 0x60000>; + interrupts = <GIC_SPI 588 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 589 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 590 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 591 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 592 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 593 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 594 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 595 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 596 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 597 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 598 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 599 IRQ_TYPE_LEVEL_HIGH>; + dma-channels = <12>; + dma-channel-mask = <0xff>; + iommus = <&apps_smmu 0x5f6 0x0>; + #dma-cells = <3>; + status = "disabled"; + }; + qupv3_id_2: geniqup@8c0000 { compatible = "qcom,geni-se-qup"; reg = <0x0 0x008c0000 0x0 0x6000>; @@ -695,6 +718,9 @@ pinctrl-names = "default"; pinctrl-0 = <&qup_i2c14_default>; interrupts = <GIC_SPI 373 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&gpi_dma2 0 0 QCOM_GPI_I2C>, + <&gpi_dma2 1 0 QCOM_GPI_I2C>; + dma-names = "tx", "rx"; #address-cells = <1>; #size-cells = <0>; status = "disabled"; @@ -708,6 +734,9 @@ interrupts = <GIC_SPI 373 IRQ_TYPE_LEVEL_HIGH>; power-domains = <&rpmhpd SM8350_CX>; operating-points-v2 = <&qup_opp_table_120mhz>; + dmas = <&gpi_dma2 0 0 QCOM_GPI_SPI>, + <&gpi_dma2 1 0 QCOM_GPI_SPI>; + dma-names = "tx", "rx"; #address-cells = <1>; #size-cells = <0>; status = "disabled"; @@ -721,6 +750,9 @@ pinctrl-names = "default"; pinctrl-0 = <&qup_i2c15_default>; interrupts = <GIC_SPI 583 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&gpi_dma2 0 1 QCOM_GPI_I2C>, + <&gpi_dma2 1 1 QCOM_GPI_I2C>; + dma-names = "tx", "rx"; #address-cells = <1>; #size-cells = <0>; status = "disabled"; @@ -734,6 +766,9 @@ interrupts = <GIC_SPI 583 IRQ_TYPE_LEVEL_HIGH>; power-domains = <&rpmhpd SM8350_CX>; operating-points-v2 = <&qup_opp_table_120mhz>; + dmas = <&gpi_dma2 0 1 QCOM_GPI_SPI>, + <&gpi_dma2 1 1 QCOM_GPI_SPI>; + dma-names = "tx", "rx"; #address-cells = <1>; #size-cells = <0>; status = "disabled"; @@ -747,6 +782,9 @@ pinctrl-names = "default"; pinctrl-0 = <&qup_i2c16_default>; interrupts = <GIC_SPI 584 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&gpi_dma2 0 2 QCOM_GPI_I2C>, + <&gpi_dma2 1 2 QCOM_GPI_I2C>; + dma-names = "tx", "rx"; #address-cells = <1>; #size-cells = <0>; status = "disabled"; @@ -760,6 +798,9 @@ interrupts = <GIC_SPI 584 IRQ_TYPE_LEVEL_HIGH>; power-domains = <&rpmhpd SM8350_CX>; operating-points-v2 = <&qup_opp_table_100mhz>; + dmas = <&gpi_dma2 0 2 QCOM_GPI_SPI>, + <&gpi_dma2 1 2 QCOM_GPI_SPI>; + dma-names = "tx", "rx"; #address-cells = <1>; #size-cells = <0>; status = "disabled"; @@ -773,6 +814,9 @@ pinctrl-names = "default"; pinctrl-0 = <&qup_i2c17_default>; interrupts = <GIC_SPI 585 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&gpi_dma2 0 3 QCOM_GPI_I2C>, + <&gpi_dma2 1 3 QCOM_GPI_I2C>; + dma-names = "tx", "rx"; #address-cells = <1>; #size-cells = <0>; status = "disabled"; @@ -786,6 +830,9 @@ interrupts = <GIC_SPI 585 IRQ_TYPE_LEVEL_HIGH>; power-domains = <&rpmhpd SM8350_CX>; operating-points-v2 = <&qup_opp_table_100mhz>; + dmas = <&gpi_dma2 0 3 QCOM_GPI_SPI>, + <&gpi_dma2 1 3 QCOM_GPI_SPI>; + dma-names = "tx", "rx"; #address-cells = <1>; #size-cells = <0>; status = "disabled"; @@ -801,6 +848,9 @@ interrupts = <GIC_SPI 586 IRQ_TYPE_LEVEL_HIGH>; power-domains = <&rpmhpd SM8350_CX>; operating-points-v2 = <&qup_opp_table_100mhz>; + dmas = <&gpi_dma2 0 4 QCOM_GPI_SPI>, + <&gpi_dma2 1 4 QCOM_GPI_SPI>; + dma-names = "tx", "rx"; #address-cells = <1>; #size-cells = <0>; status = "disabled"; @@ -827,6 +877,9 @@ pinctrl-names = "default"; pinctrl-0 = <&qup_i2c19_default>; interrupts = <GIC_SPI 587 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&gpi_dma2 0 5 QCOM_GPI_I2C>, + <&gpi_dma2 1 5 QCOM_GPI_I2C>; + dma-names = "tx", "rx"; #address-cells = <1>; #size-cells = <0>; status = "disabled"; @@ -840,12 +893,37 @@ interrupts = <GIC_SPI 587 IRQ_TYPE_LEVEL_HIGH>; power-domains = <&rpmhpd SM8350_CX>; operating-points-v2 = <&qup_opp_table_100mhz>; + dmas = <&gpi_dma2 0 5 QCOM_GPI_SPI>, + <&gpi_dma2 1 5 QCOM_GPI_SPI>; + dma-names = "tx", "rx"; #address-cells = <1>; #size-cells = <0>; status = "disabled"; }; }; + gpi_dma0: dma-controller@900000 { + compatible = "qcom,sm8350-gpi-dma"; + reg = <0 0x09800000 0 0x60000>; + interrupts = <GIC_SPI 244 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 245 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 246 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 247 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 248 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 249 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 250 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 251 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 252 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 253 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 254 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 255 IRQ_TYPE_LEVEL_HIGH>; + dma-channels = <12>; + dma-channel-mask = <0x7e>; + iommus = <&apps_smmu 0x5b6 0x0>; + #dma-cells = <3>; + status = "disabled"; + }; + qupv3_id_0: geniqup@9c0000 { compatible = "qcom,geni-se-qup"; reg = <0x0 0x009c0000 0x0 0x6000>; @@ -866,6 +944,9 @@ pinctrl-names = "default"; pinctrl-0 = <&qup_i2c0_default>; interrupts = <GIC_SPI 601 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&gpi_dma0 0 0 QCOM_GPI_I2C>, + <&gpi_dma0 1 0 QCOM_GPI_I2C>; + dma-names = "tx", "rx"; #address-cells = <1>; #size-cells = <0>; status = "disabled"; @@ -879,6 +960,9 @@ interrupts = <GIC_SPI 601 IRQ_TYPE_LEVEL_HIGH>; power-domains = <&rpmhpd SM8350_CX>; operating-points-v2 = <&qup_opp_table_100mhz>; + dmas = <&gpi_dma0 0 0 QCOM_GPI_SPI>, + <&gpi_dma0 1 0 QCOM_GPI_SPI>; + dma-names = "tx", "rx"; #address-cells = <1>; #size-cells = <0>; status = "disabled"; @@ -892,6 +976,9 @@ pinctrl-names = "default"; pinctrl-0 = <&qup_i2c1_default>; interrupts = <GIC_SPI 602 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&gpi_dma0 0 1 QCOM_GPI_I2C>, + <&gpi_dma0 1 1 QCOM_GPI_I2C>; + dma-names = "tx", "rx"; #address-cells = <1>; #size-cells = <0>; status = "disabled"; @@ -905,6 +992,9 @@ interrupts = <GIC_SPI 602 IRQ_TYPE_LEVEL_HIGH>; power-domains = <&rpmhpd SM8350_CX>; operating-points-v2 = <&qup_opp_table_100mhz>; + dmas = <&gpi_dma0 0 1 QCOM_GPI_SPI>, + <&gpi_dma0 1 1 QCOM_GPI_SPI>; + dma-names = "tx", "rx"; #address-cells = <1>; #size-cells = <0>; status = "disabled"; @@ -918,6 +1008,9 @@ pinctrl-names = "default"; pinctrl-0 = <&qup_i2c2_default>; interrupts = <GIC_SPI 603 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&gpi_dma0 0 2 QCOM_GPI_I2C>, + <&gpi_dma0 1 2 QCOM_GPI_I2C>; + dma-names = "tx", "rx"; #address-cells = <1>; #size-cells = <0>; status = "disabled"; @@ -931,6 +1024,9 @@ interrupts = <GIC_SPI 603 IRQ_TYPE_LEVEL_HIGH>; power-domains = <&rpmhpd SM8350_CX>; operating-points-v2 = <&qup_opp_table_100mhz>; + dmas = <&gpi_dma0 0 2 QCOM_GPI_SPI>, + <&gpi_dma0 1 2 QCOM_GPI_SPI>; + dma-names = "tx", "rx"; #address-cells = <1>; #size-cells = <0>; status = "disabled"; @@ -961,6 +1057,9 @@ interrupts = <GIC_SPI 604 IRQ_TYPE_LEVEL_HIGH>; power-domains = <&rpmhpd SM8350_CX>; operating-points-v2 = <&qup_opp_table_100mhz>; + dmas = <&gpi_dma0 0 3 QCOM_GPI_SPI>, + <&gpi_dma0 1 3 QCOM_GPI_SPI>; + dma-names = "tx", "rx"; #address-cells = <1>; #size-cells = <0>; status = "disabled"; @@ -974,6 +1073,9 @@ pinctrl-names = "default"; pinctrl-0 = <&qup_i2c4_default>; interrupts = <GIC_SPI 605 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&gpi_dma0 0 4 QCOM_GPI_I2C>, + <&gpi_dma0 1 4 QCOM_GPI_I2C>; + dma-names = "tx", "rx"; #address-cells = <1>; #size-cells = <0>; status = "disabled"; @@ -987,6 +1089,9 @@ interrupts = <GIC_SPI 605 IRQ_TYPE_LEVEL_HIGH>; power-domains = <&rpmhpd SM8350_CX>; operating-points-v2 = <&qup_opp_table_100mhz>; + dmas = <&gpi_dma0 0 4 QCOM_GPI_SPI>, + <&gpi_dma0 1 4 QCOM_GPI_SPI>; + dma-names = "tx", "rx"; #address-cells = <1>; #size-cells = <0>; status = "disabled"; @@ -1000,6 +1105,9 @@ pinctrl-names = "default"; pinctrl-0 = <&qup_i2c5_default>; interrupts = <GIC_SPI 606 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&gpi_dma0 0 5 QCOM_GPI_I2C>, + <&gpi_dma0 1 5 QCOM_GPI_I2C>; + dma-names = "tx", "rx"; #address-cells = <1>; #size-cells = <0>; status = "disabled"; @@ -1013,6 +1121,9 @@ interrupts = <GIC_SPI 606 IRQ_TYPE_LEVEL_HIGH>; power-domains = <&rpmhpd SM8350_CX>; operating-points-v2 = <&qup_opp_table_100mhz>; + dmas = <&gpi_dma0 0 5 QCOM_GPI_SPI>, + <&gpi_dma0 1 5 QCOM_GPI_SPI>; + dma-names = "tx", "rx"; #address-cells = <1>; #size-cells = <0>; status = "disabled"; @@ -1026,6 +1137,9 @@ pinctrl-names = "default"; pinctrl-0 = <&qup_i2c6_default>; interrupts = <GIC_SPI 607 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&gpi_dma0 0 6 QCOM_GPI_I2C>, + <&gpi_dma0 1 6 QCOM_GPI_I2C>; + dma-names = "tx", "rx"; #address-cells = <1>; #size-cells = <0>; status = "disabled"; @@ -1039,6 +1153,9 @@ interrupts = <GIC_SPI 607 IRQ_TYPE_LEVEL_HIGH>; power-domains = <&rpmhpd SM8350_CX>; operating-points-v2 = <&qup_opp_table_100mhz>; + dmas = <&gpi_dma0 0 6 QCOM_GPI_SPI>, + <&gpi_dma0 1 6 QCOM_GPI_SPI>; + dma-names = "tx", "rx"; #address-cells = <1>; #size-cells = <0>; status = "disabled"; @@ -1065,6 +1182,9 @@ pinctrl-names = "default"; pinctrl-0 = <&qup_i2c7_default>; interrupts = <GIC_SPI 608 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&gpi_dma0 0 7 QCOM_GPI_I2C>, + <&gpi_dma0 1 7 QCOM_GPI_I2C>; + dma-names = "tx", "rx"; #address-cells = <1>; #size-cells = <0>; status = "disabled"; @@ -1078,12 +1198,37 @@ interrupts = <GIC_SPI 608 IRQ_TYPE_LEVEL_HIGH>; power-domains = <&rpmhpd SM8350_CX>; operating-points-v2 = <&qup_opp_table_100mhz>; + dmas = <&gpi_dma0 0 7 QCOM_GPI_SPI>, + <&gpi_dma0 1 7 QCOM_GPI_SPI>; + dma-names = "tx", "rx"; #address-cells = <1>; #size-cells = <0>; status = "disabled"; }; }; + gpi_dma1: dma-controller@a00000 { + compatible = "qcom,sm8350-gpi-dma"; + reg = <0 0x00a00000 0 0x60000>; + interrupts = <GIC_SPI 279 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 280 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 281 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 282 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 283 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 284 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 293 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 294 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 295 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 296 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 297 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 298 IRQ_TYPE_LEVEL_HIGH>; + dma-channels = <12>; + dma-channel-mask = <0xff>; + iommus = <&apps_smmu 0x56 0x0>; + #dma-cells = <3>; + status = "disabled"; + }; + qupv3_id_1: geniqup@ac0000 { compatible = "qcom,geni-se-qup"; reg = <0x0 0x00ac0000 0x0 0x6000>; @@ -1104,6 +1249,9 @@ pinctrl-names = "default"; pinctrl-0 = <&qup_i2c8_default>; interrupts = <GIC_SPI 353 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&gpi_dma1 0 0 QCOM_GPI_I2C>, + <&gpi_dma1 1 0 QCOM_GPI_I2C>; + dma-names = "tx", "rx"; #address-cells = <1>; #size-cells = <0>; status = "disabled"; @@ -1117,6 +1265,9 @@ interrupts = <GIC_SPI 353 IRQ_TYPE_LEVEL_HIGH>; power-domains = <&rpmhpd SM8350_CX>; operating-points-v2 = <&qup_opp_table_120mhz>; + dmas = <&gpi_dma1 0 0 QCOM_GPI_SPI>, + <&gpi_dma1 1 0 QCOM_GPI_SPI>; + dma-names = "tx", "rx"; #address-cells = <1>; #size-cells = <0>; status = "disabled"; @@ -1130,6 +1281,9 @@ pinctrl-names = "default"; pinctrl-0 = <&qup_i2c9_default>; interrupts = <GIC_SPI 354 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&gpi_dma1 0 1 QCOM_GPI_I2C>, + <&gpi_dma1 1 1 QCOM_GPI_I2C>; + dma-names = "tx", "rx"; #address-cells = <1>; #size-cells = <0>; status = "disabled"; @@ -1143,6 +1297,9 @@ interrupts = <GIC_SPI 354 IRQ_TYPE_LEVEL_HIGH>; power-domains = <&rpmhpd SM8350_CX>; operating-points-v2 = <&qup_opp_table_100mhz>; + dmas = <&gpi_dma1 0 1 QCOM_GPI_SPI>, + <&gpi_dma1 1 1 QCOM_GPI_SPI>; + dma-names = "tx", "rx"; #address-cells = <1>; #size-cells = <0>; status = "disabled"; @@ -1156,6 +1313,9 @@ pinctrl-names = "default"; pinctrl-0 = <&qup_i2c10_default>; interrupts = <GIC_SPI 355 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&gpi_dma1 0 2 QCOM_GPI_I2C>, + <&gpi_dma1 1 2 QCOM_GPI_I2C>; + dma-names = "tx", "rx"; #address-cells = <1>; #size-cells = <0>; status = "disabled"; @@ -1169,6 +1329,9 @@ interrupts = <GIC_SPI 355 IRQ_TYPE_LEVEL_HIGH>; power-domains = <&rpmhpd SM8350_CX>; operating-points-v2 = <&qup_opp_table_100mhz>; + dmas = <&gpi_dma1 0 2 QCOM_GPI_SPI>, + <&gpi_dma1 1 2 QCOM_GPI_SPI>; + dma-names = "tx", "rx"; #address-cells = <1>; #size-cells = <0>; status = "disabled"; @@ -1182,6 +1345,9 @@ pinctrl-names = "default"; pinctrl-0 = <&qup_i2c11_default>; interrupts = <GIC_SPI 356 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&gpi_dma1 0 3 QCOM_GPI_I2C>, + <&gpi_dma1 1 3 QCOM_GPI_I2C>; + dma-names = "tx", "rx"; #address-cells = <1>; #size-cells = <0>; status = "disabled"; @@ -1195,6 +1361,9 @@ interrupts = <GIC_SPI 356 IRQ_TYPE_LEVEL_HIGH>; power-domains = <&rpmhpd SM8350_CX>; operating-points-v2 = <&qup_opp_table_100mhz>; + dmas = <&gpi_dma1 0 3 QCOM_GPI_SPI>, + <&gpi_dma1 1 3 QCOM_GPI_SPI>; + dma-names = "tx", "rx"; #address-cells = <1>; #size-cells = <0>; status = "disabled"; @@ -1208,6 +1377,9 @@ pinctrl-names = "default"; pinctrl-0 = <&qup_i2c12_default>; interrupts = <GIC_SPI 357 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&gpi_dma1 0 4 QCOM_GPI_I2C>, + <&gpi_dma1 1 4 QCOM_GPI_I2C>; + dma-names = "tx", "rx"; #address-cells = <1>; #size-cells = <0>; status = "disabled"; @@ -1221,6 +1393,9 @@ interrupts = <GIC_SPI 357 IRQ_TYPE_LEVEL_HIGH>; power-domains = <&rpmhpd SM8350_CX>; operating-points-v2 = <&qup_opp_table_100mhz>; + dmas = <&gpi_dma1 0 4 QCOM_GPI_SPI>, + <&gpi_dma1 1 4 QCOM_GPI_SPI>; + dma-names = "tx", "rx"; #address-cells = <1>; #size-cells = <0>; status = "disabled"; @@ -1234,6 +1409,9 @@ pinctrl-names = "default"; pinctrl-0 = <&qup_i2c13_default>; interrupts = <GIC_SPI 358 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&gpi_dma1 0 5 QCOM_GPI_I2C>, + <&gpi_dma1 1 5 QCOM_GPI_I2C>; + dma-names = "tx", "rx"; #address-cells = <1>; #size-cells = <0>; status = "disabled"; @@ -1247,6 +1425,9 @@ interrupts = <GIC_SPI 358 IRQ_TYPE_LEVEL_HIGH>; power-domains = <&rpmhpd SM8350_CX>; operating-points-v2 = <&qup_opp_table_100mhz>; + dmas = <&gpi_dma1 0 5 QCOM_GPI_SPI>, + <&gpi_dma1 1 5 QCOM_GPI_SPI>; + dma-names = "tx", "rx"; #address-cells = <1>; #size-cells = <0>; status = "disabled"; @@ -1881,7 +2062,7 @@ }; }; - apps_bcm_voter: bcm_voter { + apps_bcm_voter: bcm-voter { compatible = "qcom,bcm-voter"; }; }; @@ -1916,7 +2097,6 @@ iommus = <&apps_smmu 0xe0 0x0>; clock-names = - "ref_clk", "core_clk", "bus_aggr_clk", "iface_clk", @@ -1926,7 +2106,6 @@ "rx_lane0_sync_clk", "rx_lane1_sync_clk"; clocks = - <&rpmhcc RPMH_CXO_CLK>, <&gcc GCC_UFS_PHY_AXI_CLK>, <&gcc GCC_AGGRE_UFS_PHY_AXI_CLK>, <&gcc GCC_UFS_PHY_AHB_CLK>, @@ -1937,7 +2116,6 @@ <&gcc GCC_UFS_PHY_RX_SYMBOL_1_CLK>; freq-table-hz = <75000000 300000000>, - <75000000 300000000>, <0 0>, <0 0>, <75000000 300000000>, diff --git a/arch/arm64/boot/dts/qcom/sm8450-hdk.dts b/arch/arm64/boot/dts/qcom/sm8450-hdk.dts index f0fcb1428449..4e51a9d6af98 100644 --- a/arch/arm64/boot/dts/qcom/sm8450-hdk.dts +++ b/arch/arm64/boot/dts/qcom/sm8450-hdk.dts @@ -349,6 +349,47 @@ }; }; +&pcie0 { + status = "okay"; + max-link-speed = <2>; +}; + +&pcie0_phy { + status = "okay"; + vdda-phy-supply = <&vreg_l5b_0p88>; + vdda-pll-supply = <&vreg_l6b_1p2>; +}; + +&pcie1 { + status = "okay"; +}; + +&pcie1_phy { + status = "okay"; + vdda-phy-supply = <&vreg_l2h_0p91>; + vdda-pll-supply = <&vreg_l6b_1p2>; +}; + +&remoteproc_adsp { + status = "okay"; + firmware-name = "qcom/sm8450/adsp.mbn"; +}; + +&remoteproc_cdsp { + status = "okay"; + firmware-name = "qcom/sm8450/cdsp.mbn"; +}; + +&remoteproc_mpss { + status = "okay"; + firmware-name = "qcom/sm8450/modem.mbn"; +}; + +&remoteproc_slpi { + status = "okay"; + firmware-name = "qcom/sm8450/slpi.mbn"; +}; + &qupv3_id_0 { status = "okay"; }; diff --git a/arch/arm64/boot/dts/qcom/sm8450-qrd.dts b/arch/arm64/boot/dts/qcom/sm8450-qrd.dts index 9526632d4029..236e53974fdd 100644 --- a/arch/arm64/boot/dts/qcom/sm8450-qrd.dts +++ b/arch/arm64/boot/dts/qcom/sm8450-qrd.dts @@ -342,10 +342,32 @@ }; }; +&pcie0 { + status = "okay"; +}; + +&pcie0_phy { + status = "okay"; + vdda-phy-supply = <&vreg_l5b_0p88>; + vdda-pll-supply = <&vreg_l6b_1p2>; +}; + +&gpi_dma0 { + status = "okay"; +}; + +&i2c5 { + status = "okay"; +}; + &qupv3_id_0 { status = "okay"; }; +&qupv3_id_2 { + status = "okay"; +}; + &remoteproc_adsp { status = "okay"; firmware-name = "qcom/sm8450/adsp.mbn"; @@ -366,6 +388,18 @@ firmware-name = "qcom/sm8450/slpi.mbn"; }; +&spi4 { + status = "okay"; +}; + +&spi18 { + status = "okay"; +}; + +&spi19 { + status = "okay"; +}; + &tlmm { gpio-reserved-ranges = <28 4>, <36 4>; }; diff --git a/arch/arm64/boot/dts/qcom/sm8450.dtsi b/arch/arm64/boot/dts/qcom/sm8450.dtsi index 934e29b9e153..7f52c3cfdfb7 100644 --- a/arch/arm64/boot/dts/qcom/sm8450.dtsi +++ b/arch/arm64/boot/dts/qcom/sm8450.dtsi @@ -6,11 +6,13 @@ #include <dt-bindings/interrupt-controller/arm-gic.h> #include <dt-bindings/clock/qcom,gcc-sm8450.h> #include <dt-bindings/clock/qcom,rpmh.h> +#include <dt-bindings/dma/qcom-gpi.h> #include <dt-bindings/gpio/gpio.h> #include <dt-bindings/mailbox/qcom-ipcc.h> #include <dt-bindings/power/qcom-rpmpd.h> #include <dt-bindings/interconnect/qcom,sm8450.h> #include <dt-bindings/soc/qcom,rpmh-rsc.h> +#include <dt-bindings/thermal/thermal.h> / { interrupt-parent = <&intc>; @@ -47,6 +49,7 @@ power-domains = <&CPU_PD0>; power-domain-names = "psci"; qcom,freq-domain = <&cpufreq_hw 0>; + #cooling-cells = <2>; L2_0: l2-cache { compatible = "cache"; next-level-cache = <&L3_0>; @@ -65,6 +68,7 @@ power-domains = <&CPU_PD1>; power-domain-names = "psci"; qcom,freq-domain = <&cpufreq_hw 0>; + #cooling-cells = <2>; L2_100: l2-cache { compatible = "cache"; next-level-cache = <&L3_0>; @@ -80,6 +84,7 @@ power-domains = <&CPU_PD2>; power-domain-names = "psci"; qcom,freq-domain = <&cpufreq_hw 0>; + #cooling-cells = <2>; L2_200: l2-cache { compatible = "cache"; next-level-cache = <&L3_0>; @@ -95,6 +100,7 @@ power-domains = <&CPU_PD3>; power-domain-names = "psci"; qcom,freq-domain = <&cpufreq_hw 0>; + #cooling-cells = <2>; L2_300: l2-cache { compatible = "cache"; next-level-cache = <&L3_0>; @@ -110,6 +116,7 @@ power-domains = <&CPU_PD4>; power-domain-names = "psci"; qcom,freq-domain = <&cpufreq_hw 1>; + #cooling-cells = <2>; L2_400: l2-cache { compatible = "cache"; next-level-cache = <&L3_0>; @@ -125,6 +132,7 @@ power-domains = <&CPU_PD5>; power-domain-names = "psci"; qcom,freq-domain = <&cpufreq_hw 1>; + #cooling-cells = <2>; L2_500: l2-cache { compatible = "cache"; next-level-cache = <&L3_0>; @@ -141,6 +149,7 @@ power-domains = <&CPU_PD6>; power-domain-names = "psci"; qcom,freq-domain = <&cpufreq_hw 1>; + #cooling-cells = <2>; L2_600: l2-cache { compatible = "cache"; next-level-cache = <&L3_0>; @@ -156,6 +165,7 @@ power-domains = <&CPU_PD7>; power-domain-names = "psci"; qcom,freq-domain = <&cpufreq_hw 2>; + #cooling-cells = <2>; L2_700: l2-cache { compatible = "cache"; next-level-cache = <&L3_0>; @@ -333,6 +343,25 @@ }; }; + qup_opp_table_100mhz: qup-100mhz-opp-table { + compatible = "operating-points-v2"; + + opp-50000000 { + opp-hz = /bits/ 64 <50000000>; + required-opps = <&rpmhpd_opp_min_svs>; + }; + + opp-75000000 { + opp-hz = /bits/ 64 <75000000>; + required-opps = <&rpmhpd_opp_low_svs>; + }; + + opp-100000000 { + opp-hz = /bits/ 64 <100000000>; + required-opps = <&rpmhpd_opp_svs>; + }; + }; + reserved_memory: reserved-memory { #address-cells = <2>; #size-cells = <2>; @@ -683,8 +712,351 @@ #clock-cells = <1>; #reset-cells = <1>; #power-domain-cells = <1>; - clock-names = "bi_tcxo", "sleep_clk"; - clocks = <&rpmhcc RPMH_CXO_CLK>, <&sleep_clk>; + clocks = <&rpmhcc RPMH_CXO_CLK>, + <&pcie0_lane>, + <&pcie1_lane>, + <&sleep_clk>; + clock-names = "bi_tcxo", + "pcie_0_pipe_clk", + "pcie_1_pipe_clk", + "sleep_clk"; + }; + + gpi_dma2: dma-controller@800000 { + compatible = "qcom,sm8450-gpi-dma"; + #dma-cells = <3>; + reg = <0 0x800000 0 0x60000>; + interrupts = <GIC_SPI 588 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 589 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 590 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 591 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 592 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 593 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 594 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 595 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 596 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 597 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 598 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 599 IRQ_TYPE_LEVEL_HIGH>; + dma-channels = <12>; + dma-channel-mask = <0x7e>; + iommus = <&apps_smmu 0x496 0x0>; + status = "disabled"; + }; + + qupv3_id_2: geniqup@8c0000 { + compatible = "qcom,geni-se-qup"; + reg = <0x0 0x008c0000 0x0 0x2000>; + clock-names = "m-ahb", "s-ahb"; + clocks = <&gcc GCC_QUPV3_WRAP_2_M_AHB_CLK>, + <&gcc GCC_QUPV3_WRAP_2_S_AHB_CLK>; + iommus = <&apps_smmu 0x483 0x0>; + #address-cells = <2>; + #size-cells = <2>; + ranges; + status = "disabled"; + + i2c15: i2c@880000 { + compatible = "qcom,geni-i2c"; + reg = <0x0 0x00880000 0x0 0x4000>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP2_S0_CLK>; + pinctrl-names = "default"; + pinctrl-0 = <&qup_i2c15_data_clk>; + interrupts = <GIC_SPI 373 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + interconnects = <&clk_virt MASTER_QUP_CORE_2 0 &clk_virt SLAVE_QUP_CORE_2 0>, + <&system_noc MASTER_A2NOC_SNOC 0 &gem_noc SLAVE_LLCC 0>, + <&aggre2_noc MASTER_QUP_2 0 &mc_virt SLAVE_EBI1 0>; + interconnect-names = "qup-core", "qup-config", "qup-memory"; + dmas = <&gpi_dma2 0 0 QCOM_GPI_I2C>, + <&gpi_dma2 1 0 QCOM_GPI_I2C>; + dma-names = "tx", "rx"; + status = "disabled"; + }; + + spi15: spi@880000 { + compatible = "qcom,geni-spi"; + reg = <0x0 0x00880000 0x0 0x4000>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP2_S0_CLK>; + interrupts = <GIC_SPI 373 IRQ_TYPE_LEVEL_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&qup_spi15_data_clk>, <&qup_spi15_cs>; + spi-max-frequency = <50000000>; + interconnects = <&clk_virt MASTER_QUP_CORE_2 0 &clk_virt SLAVE_QUP_CORE_2 0>, + <&system_noc MASTER_A2NOC_SNOC 0 &gem_noc SLAVE_LLCC 0>; + interconnect-names = "qup-core", "qup-config"; + dmas = <&gpi_dma2 0 0 QCOM_GPI_SPI>, + <&gpi_dma2 1 0 QCOM_GPI_SPI>; + dma-names = "tx", "rx"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + i2c16: i2c@884000 { + compatible = "qcom,geni-i2c"; + reg = <0x0 0x00884000 0x0 0x4000>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP2_S1_CLK>; + pinctrl-names = "default"; + pinctrl-0 = <&qup_i2c16_data_clk>; + interrupts = <GIC_SPI 583 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + interconnects = <&clk_virt MASTER_QUP_CORE_2 0 &clk_virt SLAVE_QUP_CORE_2 0>, + <&system_noc MASTER_A2NOC_SNOC 0 &gem_noc SLAVE_LLCC 0>, + <&aggre2_noc MASTER_QUP_2 0 &mc_virt SLAVE_EBI1 0>; + interconnect-names = "qup-core", "qup-config", "qup-memory"; + dmas = <&gpi_dma2 0 1 QCOM_GPI_I2C>, + <&gpi_dma2 1 1 QCOM_GPI_I2C>; + dma-names = "tx", "rx"; + status = "disabled"; + }; + + spi16: spi@884000 { + compatible = "qcom,geni-spi"; + reg = <0x0 0x00884000 0x0 0x4000>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP2_S1_CLK>; + interrupts = <GIC_SPI 583 IRQ_TYPE_LEVEL_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&qup_spi16_data_clk>, <&qup_spi16_cs>; + spi-max-frequency = <50000000>; + interconnects = <&clk_virt MASTER_QUP_CORE_2 0 &clk_virt SLAVE_QUP_CORE_2 0>, + <&system_noc MASTER_A2NOC_SNOC 0 &gem_noc SLAVE_LLCC 0>; + interconnect-names = "qup-core", "qup-config"; + dmas = <&gpi_dma2 0 1 QCOM_GPI_SPI>, + <&gpi_dma2 1 1 QCOM_GPI_SPI>; + dma-names = "tx", "rx"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + i2c17: i2c@888000 { + compatible = "qcom,geni-i2c"; + reg = <0x0 0x00888000 0x0 0x4000>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP2_S2_CLK>; + pinctrl-names = "default"; + pinctrl-0 = <&qup_i2c17_data_clk>; + interrupts = <GIC_SPI 584 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + interconnects = <&clk_virt MASTER_QUP_CORE_2 0 &clk_virt SLAVE_QUP_CORE_2 0>, + <&system_noc MASTER_A2NOC_SNOC 0 &gem_noc SLAVE_LLCC 0>, + <&aggre2_noc MASTER_QUP_2 0 &mc_virt SLAVE_EBI1 0>; + interconnect-names = "qup-core", "qup-config", "qup-memory"; + dmas = <&gpi_dma2 0 2 QCOM_GPI_I2C>, + <&gpi_dma2 1 2 QCOM_GPI_I2C>; + dma-names = "tx", "rx"; + status = "disabled"; + }; + + spi17: spi@888000 { + compatible = "qcom,geni-spi"; + reg = <0x0 0x00888000 0x0 0x4000>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP2_S2_CLK>; + interrupts = <GIC_SPI 584 IRQ_TYPE_LEVEL_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&qup_spi17_data_clk>, <&qup_spi17_cs>; + spi-max-frequency = <50000000>; + interconnects = <&clk_virt MASTER_QUP_CORE_2 0 &clk_virt SLAVE_QUP_CORE_2 0>, + <&system_noc MASTER_A2NOC_SNOC 0 &gem_noc SLAVE_LLCC 0>; + interconnect-names = "qup-core", "qup-config"; + dmas = <&gpi_dma2 0 2 QCOM_GPI_SPI>, + <&gpi_dma2 1 2 QCOM_GPI_SPI>; + dma-names = "tx", "rx"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + i2c18: i2c@88c000 { + compatible = "qcom,geni-i2c"; + reg = <0x0 0x0088c000 0x0 0x4000>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP2_S3_CLK>; + pinctrl-names = "default"; + pinctrl-0 = <&qup_i2c18_data_clk>; + interrupts = <GIC_SPI 585 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + interconnects = <&clk_virt MASTER_QUP_CORE_2 0 &clk_virt SLAVE_QUP_CORE_2 0>, + <&system_noc MASTER_A2NOC_SNOC 0 &gem_noc SLAVE_LLCC 0>, + <&aggre2_noc MASTER_QUP_2 0 &mc_virt SLAVE_EBI1 0>; + interconnect-names = "qup-core", "qup-config", "qup-memory"; + dmas = <&gpi_dma2 0 3 QCOM_GPI_I2C>, + <&gpi_dma2 1 3 QCOM_GPI_I2C>; + dma-names = "tx", "rx"; + status = "disabled"; + }; + + spi18: spi@88c000 { + compatible = "qcom,geni-spi"; + reg = <0 0x0088c000 0 0x4000>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP2_S3_CLK>; + interrupts = <GIC_SPI 585 IRQ_TYPE_LEVEL_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&qup_spi18_data_clk>, <&qup_spi18_cs>; + spi-max-frequency = <50000000>; + interconnects = <&clk_virt MASTER_QUP_CORE_2 0 &clk_virt SLAVE_QUP_CORE_2 0>, + <&system_noc MASTER_A2NOC_SNOC 0 &gem_noc SLAVE_LLCC 0>; + interconnect-names = "qup-core", "qup-config"; + dmas = <&gpi_dma2 0 3 QCOM_GPI_I2C>, + <&gpi_dma2 1 3 QCOM_GPI_I2C>; + dma-names = "tx", "rx"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + i2c19: i2c@890000 { + compatible = "qcom,geni-i2c"; + reg = <0x0 0x00890000 0x0 0x4000>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP2_S4_CLK>; + pinctrl-names = "default"; + pinctrl-0 = <&qup_i2c19_data_clk>; + interrupts = <GIC_SPI 586 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + interconnects = <&clk_virt MASTER_QUP_CORE_2 0 &clk_virt SLAVE_QUP_CORE_2 0>, + <&system_noc MASTER_A2NOC_SNOC 0 &gem_noc SLAVE_LLCC 0>, + <&aggre2_noc MASTER_QUP_2 0 &mc_virt SLAVE_EBI1 0>; + interconnect-names = "qup-core", "qup-config", "qup-memory"; + dmas = <&gpi_dma2 0 4 QCOM_GPI_I2C>, + <&gpi_dma2 1 4 QCOM_GPI_I2C>; + dma-names = "tx", "rx"; + status = "disabled"; + }; + + spi19: spi@890000 { + compatible = "qcom,geni-spi"; + reg = <0 0x00890000 0 0x4000>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP2_S4_CLK>; + interrupts = <GIC_SPI 586 IRQ_TYPE_LEVEL_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&qup_spi19_data_clk>, <&qup_spi19_cs>; + spi-max-frequency = <50000000>; + interconnects = <&clk_virt MASTER_QUP_CORE_2 0 &clk_virt SLAVE_QUP_CORE_2 0>, + <&system_noc MASTER_A2NOC_SNOC 0 &gem_noc SLAVE_LLCC 0>; + interconnect-names = "qup-core", "qup-config"; + dmas = <&gpi_dma2 0 4 QCOM_GPI_I2C>, + <&gpi_dma2 1 4 QCOM_GPI_I2C>; + dma-names = "tx", "rx"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + i2c20: i2c@894000 { + compatible = "qcom,geni-i2c"; + reg = <0x0 0x00894000 0x0 0x4000>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP2_S5_CLK>; + pinctrl-names = "default"; + pinctrl-0 = <&qup_i2c20_data_clk>; + interrupts = <GIC_SPI 587 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + interconnects = <&clk_virt MASTER_QUP_CORE_2 0 &clk_virt SLAVE_QUP_CORE_2 0>, + <&system_noc MASTER_A2NOC_SNOC 0 &gem_noc SLAVE_LLCC 0>, + <&aggre2_noc MASTER_QUP_2 0 &mc_virt SLAVE_EBI1 0>; + interconnect-names = "qup-core", "qup-config", "qup-memory"; + dmas = <&gpi_dma2 0 5 QCOM_GPI_I2C>, + <&gpi_dma2 1 5 QCOM_GPI_I2C>; + dma-names = "tx", "rx"; + status = "disabled"; + }; + + spi20: spi@894000 { + compatible = "qcom,geni-spi"; + reg = <0 0x00894000 0 0x4000>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP2_S5_CLK>; + interrupts = <GIC_SPI 587 IRQ_TYPE_LEVEL_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&qup_spi20_data_clk>, <&qup_spi20_cs>; + spi-max-frequency = <50000000>; + interconnects = <&clk_virt MASTER_QUP_CORE_2 0 &clk_virt SLAVE_QUP_CORE_2 0>, + <&system_noc MASTER_A2NOC_SNOC 0 &gem_noc SLAVE_LLCC 0>; + interconnect-names = "qup-core", "qup-config"; + dmas = <&gpi_dma2 0 5 QCOM_GPI_SPI>, + <&gpi_dma2 1 5 QCOM_GPI_SPI>; + dma-names = "tx", "rx"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + i2c21: i2c@898000 { + compatible = "qcom,geni-i2c"; + reg = <0x0 0x00898000 0x0 0x4000>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP2_S6_CLK>; + pinctrl-names = "default"; + pinctrl-0 = <&qup_i2c21_data_clk>; + interrupts = <GIC_SPI 579 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + interconnects = <&clk_virt MASTER_QUP_CORE_2 0 &clk_virt SLAVE_QUP_CORE_2 0>, + <&system_noc MASTER_A2NOC_SNOC 0 &gem_noc SLAVE_LLCC 0>, + <&aggre2_noc MASTER_QUP_2 0 &mc_virt SLAVE_EBI1 0>; + interconnect-names = "qup-core", "qup-config", "qup-memory"; + dmas = <&gpi_dma2 0 6 QCOM_GPI_I2C>, + <&gpi_dma2 1 6 QCOM_GPI_I2C>; + dma-names = "tx", "rx"; + status = "disabled"; + }; + + spi21: spi@898000 { + compatible = "qcom,geni-spi"; + reg = <0 0x00898000 0 0x4000>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP2_S6_CLK>; + interrupts = <GIC_SPI 579 IRQ_TYPE_LEVEL_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&qup_spi21_data_clk>, <&qup_spi21_cs>; + spi-max-frequency = <50000000>; + interconnects = <&clk_virt MASTER_QUP_CORE_2 0 &clk_virt SLAVE_QUP_CORE_2 0>, + <&system_noc MASTER_A2NOC_SNOC 0 &gem_noc SLAVE_LLCC 0>; + interconnect-names = "qup-core", "qup-config"; + dmas = <&gpi_dma2 0 6 QCOM_GPI_SPI>, + <&gpi_dma2 1 6 QCOM_GPI_SPI>; + dma-names = "tx", "rx"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + }; + + gpi_dma0: dma-controller@900000 { + compatible = "qcom,sm8450-gpi-dma"; + #dma-cells = <3>; + reg = <0 0x900000 0 0x60000>; + interrupts = <GIC_SPI 244 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 245 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 246 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 247 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 248 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 249 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 250 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 251 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 252 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 253 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 254 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 255 IRQ_TYPE_LEVEL_HIGH>; + dma-channels = <12>; + dma-channel-mask = <0x7e>; + iommus = <&apps_smmu 0x5b6 0x0>; + status = "disabled"; }; qupv3_id_0: geniqup@9c0000 { @@ -693,11 +1065,300 @@ clock-names = "m-ahb", "s-ahb"; clocks = <&gcc GCC_QUPV3_WRAP_0_M_AHB_CLK>, <&gcc GCC_QUPV3_WRAP_0_S_AHB_CLK>; + iommus = <&apps_smmu 0x5a3 0x0>; + interconnects = <&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>; + interconnect-names = "qup-core"; #address-cells = <2>; #size-cells = <2>; ranges; status = "disabled"; + i2c0: i2c@980000 { + compatible = "qcom,geni-i2c"; + reg = <0x0 0x00980000 0x0 0x4000>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP0_S0_CLK>; + pinctrl-names = "default"; + pinctrl-0 = <&qup_i2c0_data_clk>; + interrupts = <GIC_SPI 601 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + interconnects = <&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>, + <&system_noc MASTER_A2NOC_SNOC 0 &gem_noc SLAVE_LLCC 0>, + <&aggre2_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI1 0>; + interconnect-names = "qup-core", "qup-config", "qup-memory"; + dmas = <&gpi_dma0 0 0 QCOM_GPI_I2C>, + <&gpi_dma0 1 0 QCOM_GPI_I2C>; + dma-names = "tx", "rx"; + status = "disabled"; + }; + + spi0: spi@980000 { + compatible = "qcom,geni-spi"; + reg = <0x0 0x00980000 0x0 0x4000>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP0_S0_CLK>; + interrupts = <GIC_SPI 601 IRQ_TYPE_LEVEL_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&qup_spi0_data_clk>, <&qup_spi0_cs>; + power-domains = <&rpmhpd SM8450_CX>; + operating-points-v2 = <&qup_opp_table_100mhz>; + interconnects = <&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>, + <&system_noc MASTER_A2NOC_SNOC 0 &gem_noc SLAVE_LLCC 0>, + <&aggre2_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI1 0>; + interconnect-names = "qup-core", "qup-config", "qup-memory"; + dmas = <&gpi_dma0 0 0 QCOM_GPI_SPI>, + <&gpi_dma0 1 0 QCOM_GPI_SPI>; + dma-names = "tx", "rx"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + i2c1: i2c@984000 { + compatible = "qcom,geni-i2c"; + reg = <0x0 0x00984000 0x0 0x4000>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP0_S1_CLK>; + pinctrl-names = "default"; + pinctrl-0 = <&qup_i2c1_data_clk>; + interrupts = <GIC_SPI 602 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + interconnects = <&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>, + <&system_noc MASTER_A2NOC_SNOC 0 &gem_noc SLAVE_LLCC 0>, + <&aggre2_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI1 0>; + interconnect-names = "qup-core", "qup-config", "qup-memory"; + dmas = <&gpi_dma0 0 1 QCOM_GPI_I2C>, + <&gpi_dma0 1 1 QCOM_GPI_I2C>; + dma-names = "tx", "rx"; + status = "disabled"; + }; + + spi1: spi@984000 { + compatible = "qcom,geni-spi"; + reg = <0x0 0x00984000 0x0 0x4000>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP0_S1_CLK>; + interrupts = <GIC_SPI 602 IRQ_TYPE_LEVEL_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&qup_spi1_data_clk>, <&qup_spi1_cs>; + interconnects = <&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>, + <&system_noc MASTER_A2NOC_SNOC 0 &gem_noc SLAVE_LLCC 0>, + <&aggre2_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI1 0>; + interconnect-names = "qup-core", "qup-config", "qup-memory"; + dmas = <&gpi_dma0 0 1 QCOM_GPI_SPI>, + <&gpi_dma0 1 1 QCOM_GPI_SPI>; + dma-names = "tx", "rx"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + i2c2: i2c@988000 { + compatible = "qcom,geni-i2c"; + reg = <0x0 0x00988000 0x0 0x4000>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP0_S2_CLK>; + pinctrl-names = "default"; + pinctrl-0 = <&qup_i2c2_data_clk>; + interrupts = <GIC_SPI 603 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + interconnects = <&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>, + <&system_noc MASTER_A2NOC_SNOC 0 &gem_noc SLAVE_LLCC 0>, + <&aggre2_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI1 0>; + interconnect-names = "qup-core", "qup-config", "qup-memory"; + dmas = <&gpi_dma0 0 2 QCOM_GPI_I2C>, + <&gpi_dma0 1 2 QCOM_GPI_I2C>; + dma-names = "tx", "rx"; + status = "disabled"; + }; + + spi2: spi@988000 { + compatible = "qcom,geni-spi"; + reg = <0x0 0x00988000 0x0 0x4000>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP0_S2_CLK>; + interrupts = <GIC_SPI 603 IRQ_TYPE_LEVEL_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&qup_spi2_data_clk>, <&qup_spi2_cs>; + interconnects = <&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>, + <&system_noc MASTER_A2NOC_SNOC 0 &gem_noc SLAVE_LLCC 0>, + <&aggre2_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI1 0>; + interconnect-names = "qup-core", "qup-config", "qup-memory"; + dmas = <&gpi_dma0 0 2 QCOM_GPI_SPI>, + <&gpi_dma0 1 2 QCOM_GPI_SPI>; + dma-names = "tx", "rx"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + + i2c3: i2c@98c000 { + compatible = "qcom,geni-i2c"; + reg = <0x0 0x0098c000 0x0 0x4000>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP0_S3_CLK>; + pinctrl-names = "default"; + pinctrl-0 = <&qup_i2c3_data_clk>; + interrupts = <GIC_SPI 604 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + interconnects = <&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>, + <&system_noc MASTER_A2NOC_SNOC 0 &gem_noc SLAVE_LLCC 0>, + <&aggre2_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI1 0>; + interconnect-names = "qup-core", "qup-config", "qup-memory"; + dmas = <&gpi_dma0 0 3 QCOM_GPI_I2C>, + <&gpi_dma0 1 3 QCOM_GPI_I2C>; + dma-names = "tx", "rx"; + status = "disabled"; + }; + + spi3: spi@98c000 { + compatible = "qcom,geni-spi"; + reg = <0x0 0x0098c000 0x0 0x4000>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP0_S3_CLK>; + interrupts = <GIC_SPI 604 IRQ_TYPE_LEVEL_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&qup_spi3_data_clk>, <&qup_spi3_cs>; + interconnects = <&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>, + <&system_noc MASTER_A2NOC_SNOC 0 &gem_noc SLAVE_LLCC 0>, + <&aggre2_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI1 0>; + interconnect-names = "qup-core", "qup-config", "qup-memory"; + dmas = <&gpi_dma0 0 3 QCOM_GPI_SPI>, + <&gpi_dma0 1 3 QCOM_GPI_SPI>; + dma-names = "tx", "rx"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + i2c4: i2c@990000 { + compatible = "qcom,geni-i2c"; + reg = <0x0 0x00990000 0x0 0x4000>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP0_S4_CLK>; + pinctrl-names = "default"; + pinctrl-0 = <&qup_i2c4_data_clk>; + interrupts = <GIC_SPI 605 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + interconnects = <&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>, + <&system_noc MASTER_A2NOC_SNOC 0 &gem_noc SLAVE_LLCC 0>, + <&aggre2_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI1 0>; + interconnect-names = "qup-core", "qup-config", "qup-memory"; + dmas = <&gpi_dma0 0 4 QCOM_GPI_I2C>, + <&gpi_dma0 1 4 QCOM_GPI_I2C>; + dma-names = "tx", "rx"; + status = "disabled"; + }; + + spi4: spi@990000 { + compatible = "qcom,geni-spi"; + reg = <0x0 0x00990000 0x0 0x4000>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP0_S4_CLK>; + interrupts = <GIC_SPI 605 IRQ_TYPE_LEVEL_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&qup_spi4_data_clk>, <&qup_spi4_cs>; + power-domains = <&rpmhpd SM8450_CX>; + operating-points-v2 = <&qup_opp_table_100mhz>; + interconnects = <&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>, + <&system_noc MASTER_A2NOC_SNOC 0 &gem_noc SLAVE_LLCC 0>, + <&aggre2_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI1 0>; + interconnect-names = "qup-core", "qup-config", "qup-memory"; + dmas = <&gpi_dma0 0 4 QCOM_GPI_SPI>, + <&gpi_dma0 1 4 QCOM_GPI_SPI>; + dma-names = "tx", "rx"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + i2c5: i2c@994000 { + compatible = "qcom,geni-i2c"; + reg = <0x0 0x00994000 0x0 0x4000>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP0_S5_CLK>; + pinctrl-names = "default"; + pinctrl-0 = <&qup_i2c5_data_clk>; + interrupts = <GIC_SPI 606 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + interconnects = <&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>, + <&system_noc MASTER_A2NOC_SNOC 0 &gem_noc SLAVE_LLCC 0>, + <&aggre2_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI1 0>; + interconnect-names = "qup-core", "qup-config", "qup-memory"; + dmas = <&gpi_dma0 0 5 QCOM_GPI_I2C>, + <&gpi_dma0 1 5 QCOM_GPI_I2C>; + dma-names = "tx", "rx"; + status = "disabled"; + }; + + spi5: spi@994000 { + compatible = "qcom,geni-spi"; + reg = <0x0 0x00994000 0x0 0x4000>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP0_S5_CLK>; + interrupts = <GIC_SPI 606 IRQ_TYPE_LEVEL_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&qup_spi5_data_clk>, <&qup_spi5_cs>; + interconnects = <&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>, + <&system_noc MASTER_A2NOC_SNOC 0 &gem_noc SLAVE_LLCC 0>, + <&aggre2_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI1 0>; + interconnect-names = "qup-core", "qup-config", "qup-memory"; + dmas = <&gpi_dma0 0 5 QCOM_GPI_SPI>, + <&gpi_dma0 1 5 QCOM_GPI_SPI>; + dma-names = "tx", "rx"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + + i2c6: i2c@998000 { + compatible = "qcom,geni-i2c"; + reg = <0x0 0x998000 0x0 0x4000>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP0_S6_CLK>; + pinctrl-names = "default"; + pinctrl-0 = <&qup_i2c6_data_clk>; + interrupts = <GIC_SPI 607 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + interconnects = <&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>, + <&system_noc MASTER_A2NOC_SNOC 0 &gem_noc SLAVE_LLCC 0>, + <&aggre2_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI1 0>; + interconnect-names = "qup-core", "qup-config", "qup-memory"; + dmas = <&gpi_dma0 0 6 QCOM_GPI_I2C>, + <&gpi_dma0 1 6 QCOM_GPI_I2C>; + dma-names = "tx", "rx"; + status = "disabled"; + }; + + spi6: spi@998000 { + compatible = "qcom,geni-spi"; + reg = <0x0 0x998000 0x0 0x4000>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP0_S6_CLK>; + interrupts = <GIC_SPI 607 IRQ_TYPE_LEVEL_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&qup_spi6_data_clk>, <&qup_spi6_cs>; + interconnects = <&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>, + <&system_noc MASTER_A2NOC_SNOC 0 &gem_noc SLAVE_LLCC 0>, + <&aggre2_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI1 0>; + interconnect-names = "qup-core", "qup-config", "qup-memory"; + dmas = <&gpi_dma0 0 6 QCOM_GPI_SPI>, + <&gpi_dma0 1 6 QCOM_GPI_SPI>; + dma-names = "tx", "rx"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + uart7: serial@99c000 { compatible = "qcom,geni-debug-uart"; reg = <0 0x0099c000 0 0x4000>; @@ -712,17 +1373,242 @@ }; }; + gpi_dma1: dma-controller@a00000 { + compatible = "qcom,sm8450-gpi-dma"; + #dma-cells = <3>; + reg = <0 0xa00000 0 0x60000>; + interrupts = <GIC_SPI 279 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 280 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 281 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 282 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 283 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 284 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 293 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 294 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 295 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 296 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 297 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 298 IRQ_TYPE_LEVEL_HIGH>; + dma-channels = <12>; + dma-channel-mask = <0x7e>; + iommus = <&apps_smmu 0x56 0x0>; + status = "disabled"; + }; + qupv3_id_1: geniqup@ac0000 { compatible = "qcom,geni-se-qup"; reg = <0x0 0x00ac0000 0x0 0x6000>; clock-names = "m-ahb", "s-ahb"; clocks = <&gcc GCC_QUPV3_WRAP_1_M_AHB_CLK>, <&gcc GCC_QUPV3_WRAP_1_S_AHB_CLK>; + iommus = <&apps_smmu 0x43 0x0>; + interconnects = <&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>; + interconnect-names = "qup-core"; #address-cells = <2>; #size-cells = <2>; ranges; status = "disabled"; + i2c8: i2c@a80000 { + compatible = "qcom,geni-i2c"; + reg = <0x0 0x00a80000 0x0 0x4000>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP1_S0_CLK>; + pinctrl-names = "default"; + pinctrl-0 = <&qup_i2c8_data_clk>; + interrupts = <GIC_SPI 353 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + interconnects = <&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>, + <&system_noc MASTER_A2NOC_SNOC 0 &gem_noc SLAVE_LLCC 0>, + <&aggre2_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI1 0>; + interconnect-names = "qup-core", "qup-config", "qup-memory"; + dmas = <&gpi_dma1 0 0 QCOM_GPI_I2C>, + <&gpi_dma1 1 0 QCOM_GPI_I2C>; + dma-names = "tx", "rx"; + status = "disabled"; + }; + + spi8: spi@a80000 { + compatible = "qcom,geni-spi"; + reg = <0x0 0x00a80000 0x0 0x4000>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP1_S0_CLK>; + interrupts = <GIC_SPI 353 IRQ_TYPE_LEVEL_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&qup_spi8_data_clk>, <&qup_spi8_cs>; + interconnects = <&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>, + <&system_noc MASTER_A2NOC_SNOC 0 &gem_noc SLAVE_LLCC 0>, + <&aggre2_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI1 0>; + interconnect-names = "qup-core", "qup-config", "qup-memory"; + dmas = <&gpi_dma1 0 0 QCOM_GPI_SPI>, + <&gpi_dma1 1 0 QCOM_GPI_SPI>; + dma-names = "tx", "rx"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + i2c9: i2c@a84000 { + compatible = "qcom,geni-i2c"; + reg = <0x0 0x00a84000 0x0 0x4000>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP1_S1_CLK>; + pinctrl-names = "default"; + pinctrl-0 = <&qup_i2c9_data_clk>; + interrupts = <GIC_SPI 354 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + interconnects = <&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>, + <&system_noc MASTER_A2NOC_SNOC 0 &gem_noc SLAVE_LLCC 0>, + <&aggre2_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI1 0>; + interconnect-names = "qup-core", "qup-config", "qup-memory"; + dmas = <&gpi_dma1 0 1 QCOM_GPI_I2C>, + <&gpi_dma1 1 1 QCOM_GPI_I2C>; + dma-names = "tx", "rx"; + status = "disabled"; + }; + + spi9: spi@a84000 { + compatible = "qcom,geni-spi"; + reg = <0x0 0x00a84000 0x0 0x4000>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP1_S1_CLK>; + interrupts = <GIC_SPI 354 IRQ_TYPE_LEVEL_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&qup_spi9_data_clk>, <&qup_spi9_cs>; + interconnects = <&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>, + <&system_noc MASTER_A2NOC_SNOC 0 &gem_noc SLAVE_LLCC 0>, + <&aggre2_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI1 0>; + interconnect-names = "qup-core", "qup-config", "qup-memory"; + dmas = <&gpi_dma1 0 1 QCOM_GPI_SPI>, + <&gpi_dma1 1 1 QCOM_GPI_SPI>; + dma-names = "tx", "rx"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + i2c10: i2c@a88000 { + compatible = "qcom,geni-i2c"; + reg = <0x0 0x00a88000 0x0 0x4000>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP1_S2_CLK>; + pinctrl-names = "default"; + pinctrl-0 = <&qup_i2c10_data_clk>; + interrupts = <GIC_SPI 355 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + interconnects = <&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>, + <&system_noc MASTER_A2NOC_SNOC 0 &gem_noc SLAVE_LLCC 0>, + <&aggre2_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI1 0>; + interconnect-names = "qup-core", "qup-config", "qup-memory"; + dmas = <&gpi_dma1 0 2 QCOM_GPI_I2C>, + <&gpi_dma1 1 2 QCOM_GPI_I2C>; + dma-names = "tx", "rx"; + status = "disabled"; + }; + + spi10: spi@a88000 { + compatible = "qcom,geni-spi"; + reg = <0x0 0x00a88000 0x0 0x4000>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP1_S2_CLK>; + interrupts = <GIC_SPI 355 IRQ_TYPE_LEVEL_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&qup_spi10_data_clk>, <&qup_spi10_cs>; + interconnects = <&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>, + <&system_noc MASTER_A2NOC_SNOC 0 &gem_noc SLAVE_LLCC 0>, + <&aggre2_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI1 0>; + interconnect-names = "qup-core", "qup-config", "qup-memory"; + dmas = <&gpi_dma1 0 2 QCOM_GPI_SPI>, + <&gpi_dma1 1 2 QCOM_GPI_SPI>; + dma-names = "tx", "rx"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + i2c11: i2c@a8c000 { + compatible = "qcom,geni-i2c"; + reg = <0x0 0x00a8c000 0x0 0x4000>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP1_S3_CLK>; + pinctrl-names = "default"; + pinctrl-0 = <&qup_i2c11_data_clk>; + interrupts = <GIC_SPI 356 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + interconnects = <&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>, + <&system_noc MASTER_A2NOC_SNOC 0 &gem_noc SLAVE_LLCC 0>, + <&aggre2_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI1 0>; + interconnect-names = "qup-core", "qup-config", "qup-memory"; + dmas = <&gpi_dma1 0 3 QCOM_GPI_I2C>, + <&gpi_dma1 1 3 QCOM_GPI_I2C>; + dma-names = "tx", "rx"; + status = "disabled"; + }; + + spi11: spi@a8c000 { + compatible = "qcom,geni-spi"; + reg = <0x0 0x00a8c000 0x0 0x4000>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP1_S3_CLK>; + interrupts = <GIC_SPI 356 IRQ_TYPE_LEVEL_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&qup_spi11_data_clk>, <&qup_spi11_cs>; + interconnects = <&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>, + <&system_noc MASTER_A2NOC_SNOC 0 &gem_noc SLAVE_LLCC 0>, + <&aggre2_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI1 0>; + interconnect-names = "qup-core", "qup-config", "qup-memory"; + dmas = <&gpi_dma1 0 3 QCOM_GPI_SPI>, + <&gpi_dma1 1 3 QCOM_GPI_SPI>; + dma-names = "tx", "rx"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + i2c12: i2c@a90000 { + compatible = "qcom,geni-i2c"; + reg = <0x0 0x00a90000 0x0 0x4000>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP1_S4_CLK>; + pinctrl-names = "default"; + pinctrl-0 = <&qup_i2c12_data_clk>; + interrupts = <GIC_SPI 357 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + interconnects = <&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>, + <&system_noc MASTER_A2NOC_SNOC 0 &gem_noc SLAVE_LLCC 0>, + <&aggre2_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI1 0>; + interconnect-names = "qup-core", "qup-config", "qup-memory"; + dmas = <&gpi_dma1 0 4 QCOM_GPI_I2C>, + <&gpi_dma1 1 4 QCOM_GPI_I2C>; + dma-names = "tx", "rx"; + status = "disabled"; + }; + + spi12: spi@a90000 { + compatible = "qcom,geni-spi"; + reg = <0x0 0x00a90000 0x0 0x4000>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP1_S4_CLK>; + interrupts = <GIC_SPI 357 IRQ_TYPE_LEVEL_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&qup_spi12_data_clk>, <&qup_spi12_cs>; + interconnects = <&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>, + <&system_noc MASTER_A2NOC_SNOC 0 &gem_noc SLAVE_LLCC 0>, + <&aggre2_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI1 0>; + interconnect-names = "qup-core", "qup-config", "qup-memory"; + dmas = <&gpi_dma1 0 4 QCOM_GPI_SPI>, + <&gpi_dma1 1 4 QCOM_GPI_SPI>; + dma-names = "tx", "rx"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + i2c13: i2c@a94000 { compatible = "qcom,geni-i2c"; reg = <0 0x00a94000 0 0x4000>; @@ -731,6 +1617,33 @@ pinctrl-names = "default"; pinctrl-0 = <&qup_i2c13_data_clk>; interrupts = <GIC_SPI 358 IRQ_TYPE_LEVEL_HIGH>; + interconnects = <&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>, + <&system_noc MASTER_A2NOC_SNOC 0 &gem_noc SLAVE_LLCC 0>, + <&aggre2_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI1 0>; + interconnect-names = "qup-core", "qup-config", "qup-memory"; + dmas = <&gpi_dma1 0 5 QCOM_GPI_I2C>, + <&gpi_dma1 1 5 QCOM_GPI_I2C>; + dma-names = "tx", "rx"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + spi13: spi@a94000 { + compatible = "qcom,geni-spi"; + reg = <0x0 0x00a94000 0x0 0x4000>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP1_S5_CLK>; + interrupts = <GIC_SPI 358 IRQ_TYPE_LEVEL_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&qup_spi13_data_clk>, <&qup_spi13_cs>; + interconnects = <&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>, + <&system_noc MASTER_A2NOC_SNOC 0 &gem_noc SLAVE_LLCC 0>, + <&aggre2_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI1 0>; + interconnect-names = "qup-core", "qup-config", "qup-memory"; + dmas = <&gpi_dma1 0 5 QCOM_GPI_SPI>, + <&gpi_dma1 1 5 QCOM_GPI_SPI>; + dma-names = "tx", "rx"; #address-cells = <1>; #size-cells = <0>; status = "disabled"; @@ -744,12 +1657,257 @@ pinctrl-names = "default"; pinctrl-0 = <&qup_i2c14_data_clk>; interrupts = <GIC_SPI 363 IRQ_TYPE_LEVEL_HIGH>; + interconnects = <&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>, + <&system_noc MASTER_A2NOC_SNOC 0 &gem_noc SLAVE_LLCC 0>, + <&aggre2_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI1 0>; + interconnect-names = "qup-core", "qup-config", "qup-memory"; + dmas = <&gpi_dma1 0 6 QCOM_GPI_I2C>, + <&gpi_dma1 1 6 QCOM_GPI_I2C>; + dma-names = "tx", "rx"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + spi14: spi@a98000 { + compatible = "qcom,geni-spi"; + reg = <0x0 0x00a98000 0x0 0x4000>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP1_S6_CLK>; + interrupts = <GIC_SPI 363 IRQ_TYPE_LEVEL_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&qup_spi14_data_clk>, <&qup_spi14_cs>; + interconnects = <&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>, + <&system_noc MASTER_A2NOC_SNOC 0 &gem_noc SLAVE_LLCC 0>, + <&aggre2_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI1 0>; + interconnect-names = "qup-core", "qup-config", "qup-memory"; + dmas = <&gpi_dma1 0 6 QCOM_GPI_SPI>, + <&gpi_dma1 1 6 QCOM_GPI_SPI>; + dma-names = "tx", "rx"; #address-cells = <1>; #size-cells = <0>; status = "disabled"; }; }; + pcie0: pci@1c00000 { + compatible = "qcom,pcie-sm8450-pcie0"; + reg = <0 0x01c00000 0 0x3000>, + <0 0x60000000 0 0xf1d>, + <0 0x60000f20 0 0xa8>, + <0 0x60001000 0 0x1000>, + <0 0x60100000 0 0x100000>; + reg-names = "parf", "dbi", "elbi", "atu", "config"; + device_type = "pci"; + linux,pci-domain = <0>; + bus-range = <0x00 0xff>; + num-lanes = <1>; + + #address-cells = <3>; + #size-cells = <2>; + + ranges = <0x01000000 0x0 0x60200000 0 0x60200000 0x0 0x100000>, + <0x02000000 0x0 0x60300000 0 0x60300000 0x0 0x3d00000>; + + interrupts = <GIC_SPI 141 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "msi"; + #interrupt-cells = <1>; + interrupt-map-mask = <0 0 0 0x7>; + interrupt-map = <0 0 0 1 &intc 0 0 0 149 IRQ_TYPE_LEVEL_HIGH>, /* int_a */ + <0 0 0 2 &intc 0 0 0 150 IRQ_TYPE_LEVEL_HIGH>, /* int_b */ + <0 0 0 3 &intc 0 0 0 151 IRQ_TYPE_LEVEL_HIGH>, /* int_c */ + <0 0 0 4 &intc 0 0 0 152 IRQ_TYPE_LEVEL_HIGH>; /* int_d */ + + clocks = <&gcc GCC_PCIE_0_PIPE_CLK>, + <&gcc GCC_PCIE_0_PIPE_CLK_SRC>, + <&pcie0_lane>, + <&rpmhcc RPMH_CXO_CLK>, + <&gcc GCC_PCIE_0_AUX_CLK>, + <&gcc GCC_PCIE_0_CFG_AHB_CLK>, + <&gcc GCC_PCIE_0_MSTR_AXI_CLK>, + <&gcc GCC_PCIE_0_SLV_AXI_CLK>, + <&gcc GCC_PCIE_0_SLV_Q2A_AXI_CLK>, + <&gcc GCC_DDRSS_PCIE_SF_TBU_CLK>, + <&gcc GCC_AGGRE_NOC_PCIE_0_AXI_CLK>, + <&gcc GCC_AGGRE_NOC_PCIE_1_AXI_CLK>; + clock-names = "pipe", + "pipe_mux", + "phy_pipe", + "ref", + "aux", + "cfg", + "bus_master", + "bus_slave", + "slave_q2a", + "ddrss_sf_tbu", + "aggre0", + "aggre1"; + + iommus = <&apps_smmu 0x1c00 0x7f>; + iommu-map = <0x0 &apps_smmu 0x1c00 0x1>, + <0x100 &apps_smmu 0x1c01 0x1>; + + resets = <&gcc GCC_PCIE_0_BCR>; + reset-names = "pci"; + + power-domains = <&gcc PCIE_0_GDSC>; + power-domain-names = "gdsc"; + + phys = <&pcie0_lane>; + phy-names = "pciephy"; + + perst-gpios = <&tlmm 94 GPIO_ACTIVE_LOW>; + wake-gpios = <&tlmm 96 GPIO_ACTIVE_HIGH>; + + pinctrl-names = "default"; + pinctrl-0 = <&pcie0_default_state>; + + status = "disabled"; + }; + + pcie0_phy: phy@1c06000 { + compatible = "qcom,sm8450-qmp-gen3x1-pcie-phy"; + reg = <0 0x01c06000 0 0x200>; + #address-cells = <2>; + #size-cells = <2>; + ranges; + clocks = <&gcc GCC_PCIE_0_AUX_CLK>, + <&gcc GCC_PCIE_0_CFG_AHB_CLK>, + <&gcc GCC_PCIE_0_CLKREF_EN>, + <&gcc GCC_PCIE_0_PHY_RCHNG_CLK>; + clock-names = "aux", "cfg_ahb", "ref", "refgen"; + + resets = <&gcc GCC_PCIE_0_PHY_BCR>; + reset-names = "phy"; + + assigned-clocks = <&gcc GCC_PCIE_0_PHY_RCHNG_CLK>; + assigned-clock-rates = <100000000>; + + status = "disabled"; + + pcie0_lane: phy@1c06200 { + reg = <0 0x1c06e00 0 0x200>, /* tx */ + <0 0x1c07000 0 0x200>, /* rx */ + <0 0x1c06200 0 0x200>, /* pcs */ + <0 0x1c06600 0 0x200>; /* pcs_pcie */ + clocks = <&gcc GCC_PCIE_0_PIPE_CLK>; + clock-names = "pipe0"; + + #clock-cells = <0>; + #phy-cells = <0>; + clock-output-names = "pcie_0_pipe_clk"; + }; + }; + + pcie1: pci@1c08000 { + compatible = "qcom,pcie-sm8450-pcie1"; + reg = <0 0x01c08000 0 0x3000>, + <0 0x40000000 0 0xf1d>, + <0 0x40000f20 0 0xa8>, + <0 0x40001000 0 0x1000>, + <0 0x40100000 0 0x100000>; + reg-names = "parf", "dbi", "elbi", "atu", "config"; + device_type = "pci"; + linux,pci-domain = <1>; + bus-range = <0x00 0xff>; + num-lanes = <2>; + + #address-cells = <3>; + #size-cells = <2>; + + ranges = <0x01000000 0x0 0x40200000 0 0x40200000 0x0 0x100000>, + <0x02000000 0x0 0x40300000 0 0x40300000 0x0 0x1fd00000>; + + interrupts = <GIC_SPI 307 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "msi"; + #interrupt-cells = <1>; + interrupt-map-mask = <0 0 0 0x7>; + interrupt-map = <0 0 0 1 &intc 0 0 0 434 IRQ_TYPE_LEVEL_HIGH>, /* int_a */ + <0 0 0 2 &intc 0 0 0 435 IRQ_TYPE_LEVEL_HIGH>, /* int_b */ + <0 0 0 3 &intc 0 0 0 438 IRQ_TYPE_LEVEL_HIGH>, /* int_c */ + <0 0 0 4 &intc 0 0 0 439 IRQ_TYPE_LEVEL_HIGH>; /* int_d */ + + clocks = <&gcc GCC_PCIE_1_PIPE_CLK>, + <&gcc GCC_PCIE_1_PIPE_CLK_SRC>, + <&pcie1_lane>, + <&rpmhcc RPMH_CXO_CLK>, + <&gcc GCC_PCIE_1_AUX_CLK>, + <&gcc GCC_PCIE_1_CFG_AHB_CLK>, + <&gcc GCC_PCIE_1_MSTR_AXI_CLK>, + <&gcc GCC_PCIE_1_SLV_AXI_CLK>, + <&gcc GCC_PCIE_1_SLV_Q2A_AXI_CLK>, + <&gcc GCC_DDRSS_PCIE_SF_TBU_CLK>, + <&gcc GCC_AGGRE_NOC_PCIE_1_AXI_CLK>; + clock-names = "pipe", + "pipe_mux", + "phy_pipe", + "ref", + "aux", + "cfg", + "bus_master", + "bus_slave", + "slave_q2a", + "ddrss_sf_tbu", + "aggre1"; + + iommus = <&apps_smmu 0x1c80 0x7f>; + iommu-map = <0x0 &apps_smmu 0x1c80 0x1>, + <0x100 &apps_smmu 0x1c81 0x1>; + + resets = <&gcc GCC_PCIE_1_BCR>; + reset-names = "pci"; + + power-domains = <&gcc PCIE_1_GDSC>; + power-domain-names = "gdsc"; + + phys = <&pcie1_lane>; + phy-names = "pciephy"; + + perst-gpio = <&tlmm 97 GPIO_ACTIVE_LOW>; + enable-gpio = <&tlmm 99 GPIO_ACTIVE_HIGH>; + + pinctrl-names = "default"; + pinctrl-0 = <&pcie1_default_state>; + + status = "disabled"; + }; + + pcie1_phy: phy@1c0f000 { + compatible = "qcom,sm8450-qmp-gen4x2-pcie-phy"; + reg = <0 0x01c0f000 0 0x200>; + #address-cells = <2>; + #size-cells = <2>; + ranges; + clocks = <&gcc GCC_PCIE_1_PHY_AUX_CLK>, + <&gcc GCC_PCIE_1_CFG_AHB_CLK>, + <&gcc GCC_PCIE_1_CLKREF_EN>, + <&gcc GCC_PCIE_1_PHY_RCHNG_CLK>; + clock-names = "aux", "cfg_ahb", "ref", "refgen"; + + resets = <&gcc GCC_PCIE_1_PHY_BCR>; + reset-names = "phy"; + + assigned-clocks = <&gcc GCC_PCIE_1_PHY_RCHNG_CLK>; + assigned-clock-rates = <100000000>; + + status = "disabled"; + + pcie1_lane: phy@1c0e000 { + reg = <0 0x1c0e000 0 0x200>, /* tx */ + <0 0x1c0e200 0 0x300>, /* rx */ + <0 0x1c0f200 0 0x200>, /* pcs */ + <0 0x1c0e800 0 0x200>, /* tx */ + <0 0x1c0ea00 0 0x300>, /* rx */ + <0 0x1c0f400 0 0xc00>; /* pcs_pcie */ + clocks = <&gcc GCC_PCIE_1_PIPE_CLK>; + clock-names = "pipe0"; + + #clock-cells = <0>; + #phy-cells = <0>; + clock-output-names = "pcie_1_pipe_clk"; + }; + }; + config_noc: interconnect@1500000 { compatible = "qcom,sm8450-config-noc"; reg = <0 0x01500000 0 0x1c000>; @@ -887,6 +2045,33 @@ label = "slpi"; qcom,remote-pid = <3>; + + fastrpc { + compatible = "qcom,fastrpc"; + qcom,glink-channels = "fastrpcglink-apps-dsp"; + label = "sdsp"; + #address-cells = <1>; + #size-cells = <0>; + + compute-cb@1 { + compatible = "qcom,fastrpc-compute-cb"; + reg = <1>; + iommus = <&apps_smmu 0x0541 0x0>; + }; + + compute-cb@2 { + compatible = "qcom,fastrpc-compute-cb"; + reg = <2>; + iommus = <&apps_smmu 0x0542 0x0>; + }; + + compute-cb@3 { + compatible = "qcom,fastrpc-compute-cb"; + reg = <3>; + iommus = <&apps_smmu 0x0543 0x0>; + /* note: shared-cb = <4> in downstream */ + }; + }; }; }; @@ -927,6 +2112,32 @@ label = "lpass"; qcom,remote-pid = <2>; + + fastrpc { + compatible = "qcom,fastrpc"; + qcom,glink-channels = "fastrpcglink-apps-dsp"; + label = "adsp"; + #address-cells = <1>; + #size-cells = <0>; + + compute-cb@3 { + compatible = "qcom,fastrpc-compute-cb"; + reg = <3>; + iommus = <&apps_smmu 0x1803 0x0>; + }; + + compute-cb@4 { + compatible = "qcom,fastrpc-compute-cb"; + reg = <4>; + iommus = <&apps_smmu 0x1804 0x0>; + }; + + compute-cb@5 { + compatible = "qcom,fastrpc-compute-cb"; + reg = <5>; + iommus = <&apps_smmu 0x1805 0x0>; + }; + }; }; }; @@ -967,6 +2178,72 @@ label = "cdsp"; qcom,remote-pid = <5>; + + fastrpc { + compatible = "qcom,fastrpc"; + qcom,glink-channels = "fastrpcglink-apps-dsp"; + label = "cdsp"; + #address-cells = <1>; + #size-cells = <0>; + + compute-cb@1 { + compatible = "qcom,fastrpc-compute-cb"; + reg = <1>; + iommus = <&apps_smmu 0x2161 0x0400>, + <&apps_smmu 0x1021 0x1420>; + }; + + compute-cb@2 { + compatible = "qcom,fastrpc-compute-cb"; + reg = <2>; + iommus = <&apps_smmu 0x2162 0x0400>, + <&apps_smmu 0x1022 0x1420>; + }; + + compute-cb@3 { + compatible = "qcom,fastrpc-compute-cb"; + reg = <3>; + iommus = <&apps_smmu 0x2163 0x0400>, + <&apps_smmu 0x1023 0x1420>; + }; + + compute-cb@4 { + compatible = "qcom,fastrpc-compute-cb"; + reg = <4>; + iommus = <&apps_smmu 0x2164 0x0400>, + <&apps_smmu 0x1024 0x1420>; + }; + + compute-cb@5 { + compatible = "qcom,fastrpc-compute-cb"; + reg = <5>; + iommus = <&apps_smmu 0x2165 0x0400>, + <&apps_smmu 0x1025 0x1420>; + }; + + compute-cb@6 { + compatible = "qcom,fastrpc-compute-cb"; + reg = <6>; + iommus = <&apps_smmu 0x2166 0x0400>, + <&apps_smmu 0x1026 0x1420>; + }; + + compute-cb@7 { + compatible = "qcom,fastrpc-compute-cb"; + reg = <7>; + iommus = <&apps_smmu 0x2167 0x0400>, + <&apps_smmu 0x1027 0x1420>; + }; + + compute-cb@8 { + compatible = "qcom,fastrpc-compute-cb"; + reg = <8>; + iommus = <&apps_smmu 0x2168 0x0400>, + <&apps_smmu 0x1028 0x1420>; + }; + + /* note: secure cb9 in downstream */ + }; }; }; @@ -1021,6 +2298,28 @@ interrupt-controller; }; + tsens0: thermal-sensor@c263000 { + compatible = "qcom,sm8450-tsens", "qcom,tsens-v2"; + reg = <0 0x0c263000 0 0x1000>, /* TM */ + <0 0x0c222000 0 0x1000>; /* SROT */ + #qcom,sensors = <16>; + interrupts = <GIC_SPI 506 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 508 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "uplow", "critical"; + #thermal-sensor-cells = <1>; + }; + + tsens1: thermal-sensor@c265000 { + compatible = "qcom,sm8450-tsens", "qcom,tsens-v2"; + reg = <0 0x0c265000 0 0x1000>, /* TM */ + <0 0x0c223000 0 0x1000>; /* SROT */ + #qcom,sensors = <16>; + interrupts = <GIC_SPI 507 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 509 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "uplow", "critical"; + #thermal-sensor-cells = <1>; + }; + aoss_qmp: power-controller@c300000 { compatible = "qcom,sm8450-aoss-qmp", "qcom,aoss-qmp"; reg = <0 0x0c300000 0 0x400>; @@ -1051,6 +2350,112 @@ gpio-ranges = <&tlmm 0 0 211>; wakeup-parent = <&pdc>; + pcie0_default_state: pcie0-default-state { + perst { + pins = "gpio94"; + function = "gpio"; + drive-strength = <2>; + bias-pull-down; + }; + + clkreq { + pins = "gpio95"; + function = "pcie0_clkreqn"; + drive-strength = <2>; + bias-pull-up; + }; + + wake { + pins = "gpio96"; + function = "gpio"; + drive-strength = <2>; + bias-pull-up; + }; + }; + + pcie1_default_state: pcie1-default-state { + perst { + pins = "gpio97"; + function = "gpio"; + drive-strength = <2>; + bias-pull-down; + }; + + clkreq { + pins = "gpio98"; + function = "pcie1_clkreqn"; + drive-strength = <2>; + bias-pull-up; + }; + + wake { + pins = "gpio99"; + function = "gpio"; + drive-strength = <2>; + bias-pull-up; + }; + }; + + qup_i2c0_data_clk: qup-i2c0-data-clk { + pins = "gpio0", "gpio1"; + function = "qup0"; + }; + + qup_i2c1_data_clk: qup-i2c1-data-clk { + pins = "gpio4", "gpio5"; + function = "qup1"; + }; + + qup_i2c2_data_clk: qup-i2c2-data-clk { + pins = "gpio8", "gpio9"; + function = "qup2"; + }; + + qup_i2c3_data_clk: qup-i2c3-data-clk { + pins = "gpio12", "gpio13"; + function = "qup3"; + }; + + qup_i2c4_data_clk: qup-i2c4-data-clk { + pins = "gpio16", "gpio17"; + function = "qup4"; + }; + + qup_i2c5_data_clk: qup-i2c5-data-clk { + pins = "gpio206", "gpio207"; + function = "qup5"; + }; + + qup_i2c6_data_clk: qup-i2c6-data-clk { + pins = "gpio20", "gpio21"; + function = "qup6"; + }; + + qup_i2c8_data_clk: qup-i2c8-data-clk { + pins = "gpio28", "gpio29"; + function = "qup8"; + }; + + qup_i2c9_data_clk: qup-i2c9-data-clk { + pins = "gpio32", "gpio33"; + function = "qup9"; + }; + + qup_i2c10_data_clk: qup-i2c10-data-clk { + pins = "gpio36", "gpio37"; + function = "qup10"; + }; + + qup_i2c11_data_clk: qup-i2c11-data-clk { + pins = "gpio40", "gpio41"; + function = "qup11"; + }; + + qup_i2c12_data_clk: qup-i2c12-data-clk { + pins = "gpio44", "gpio45"; + function = "qup12"; + }; + qup_i2c13_data_clk: qup-i2c13-data-clk { pins = "gpio48", "gpio49"; function = "qup13"; @@ -1065,6 +2470,261 @@ bias-pull-up; }; + qup_i2c15_data_clk: qup-i2c15-data-clk { + pins = "gpio56", "gpio57"; + function = "qup15"; + }; + + qup_i2c16_data_clk: qup-i2c16-data-clk { + pins = "gpio60", "gpio61"; + function = "qup16"; + }; + + qup_i2c17_data_clk: qup-i2c17-data-clk { + pins = "gpio64", "gpio65"; + function = "qup17"; + }; + + qup_i2c18_data_clk: qup-i2c18-data-clk { + pins = "gpio68", "gpio69"; + function = "qup18"; + }; + + qup_i2c19_data_clk: qup-i2c19-data-clk { + pins = "gpio72", "gpio73"; + function = "qup19"; + }; + + qup_i2c20_data_clk: qup-i2c20-data-clk { + pins = "gpio76", "gpio77"; + function = "qup20"; + }; + + qup_i2c21_data_clk: qup-i2c21-data-clk { + pins = "gpio80", "gpio81"; + function = "qup21"; + }; + + qup_spi0_cs: qup-spi0-cs { + pins = "gpio3"; + function = "qup0"; + }; + + qup_spi0_data_clk: qup-spi0-data-clk { + pins = "gpio0", "gpio1", "gpio2"; + function = "qup0"; + }; + + qup_spi1_cs: qup-spi1-cs { + pins = "gpio7"; + function = "qup1"; + }; + + qup_spi1_data_clk: qup-spi1-data-clk { + pins = "gpio4", "gpio5", "gpio6"; + function = "qup1"; + }; + + qup_spi2_cs: qup-spi2-cs { + pins = "gpio11"; + function = "qup2"; + }; + + qup_spi2_data_clk: qup-spi2-data-clk { + pins = "gpio8", "gpio9", "gpio10"; + function = "qup2"; + }; + + qup_spi3_cs: qup-spi3-cs { + pins = "gpio15"; + function = "qup3"; + }; + + qup_spi3_data_clk: qup-spi3-data-clk { + pins = "gpio12", "gpio13", "gpio14"; + function = "qup3"; + }; + + qup_spi4_cs: qup-spi4-cs { + pins = "gpio19"; + function = "qup4"; + drive-strength = <6>; + bias-disable; + }; + + qup_spi4_data_clk: qup-spi4-data-clk { + pins = "gpio16", "gpio17", "gpio18"; + function = "qup4"; + }; + + qup_spi5_cs: qup-spi5-cs { + pins = "gpio85"; + function = "qup5"; + }; + + qup_spi5_data_clk: qup-spi5-data-clk { + pins = "gpio206", "gpio207", "gpio84"; + function = "qup5"; + }; + + qup_spi6_cs: qup-spi6-cs { + pins = "gpio23"; + function = "qup6"; + }; + + qup_spi6_data_clk: qup-spi6-data-clk { + pins = "gpio20", "gpio21", "gpio22"; + function = "qup6"; + }; + + qup_spi8_cs: qup-spi8-cs { + pins = "gpio31"; + function = "qup8"; + }; + + qup_spi8_data_clk: qup-spi8-data-clk { + pins = "gpio28", "gpio29", "gpio30"; + function = "qup8"; + }; + + qup_spi9_cs: qup-spi9-cs { + pins = "gpio35"; + function = "qup9"; + }; + + qup_spi9_data_clk: qup-spi9-data-clk { + pins = "gpio32", "gpio33", "gpio34"; + function = "qup9"; + }; + + qup_spi10_cs: qup-spi10-cs { + pins = "gpio39"; + function = "qup10"; + }; + + qup_spi10_data_clk: qup-spi10-data-clk { + pins = "gpio36", "gpio37", "gpio38"; + function = "qup10"; + }; + + qup_spi11_cs: qup-spi11-cs { + pins = "gpio43"; + function = "qup11"; + }; + + qup_spi11_data_clk: qup-spi11-data-clk { + pins = "gpio40", "gpio41", "gpio42"; + function = "qup11"; + }; + + qup_spi12_cs: qup-spi12-cs { + pins = "gpio47"; + function = "qup12"; + }; + + qup_spi12_data_clk: qup-spi12-data-clk { + pins = "gpio44", "gpio45", "gpio46"; + function = "qup12"; + }; + + qup_spi13_cs: qup-spi13-cs { + pins = "gpio51"; + function = "qup13"; + }; + + qup_spi13_data_clk: qup-spi13-data-clk { + pins = "gpio48", "gpio49", "gpio50"; + function = "qup13"; + }; + + qup_spi14_cs: qup-spi14-cs { + pins = "gpio55"; + function = "qup14"; + }; + + qup_spi14_data_clk: qup-spi14-data-clk { + pins = "gpio52", "gpio53", "gpio54"; + function = "qup14"; + }; + + qup_spi15_cs: qup-spi15-cs { + pins = "gpio59"; + function = "qup15"; + }; + + qup_spi15_data_clk: qup-spi15-data-clk { + pins = "gpio56", "gpio57", "gpio58"; + function = "qup15"; + }; + + qup_spi16_cs: qup-spi16-cs { + pins = "gpio63"; + function = "qup16"; + }; + + qup_spi16_data_clk: qup-spi16-data-clk { + pins = "gpio60", "gpio61", "gpio62"; + function = "qup16"; + }; + + qup_spi17_cs: qup-spi17-cs { + pins = "gpio67"; + function = "qup17"; + }; + + qup_spi17_data_clk: qup-spi17-data-clk { + pins = "gpio64", "gpio65", "gpio66"; + function = "qup17"; + }; + + qup_spi18_cs: qup-spi18-cs { + pins = "gpio71"; + function = "qup18"; + drive-strength = <6>; + bias-disable; + }; + + qup_spi18_data_clk: qup-spi18-data-clk { + pins = "gpio68", "gpio69", "gpio70"; + function = "qup18"; + drive-strength = <6>; + bias-disable; + }; + + qup_spi19_cs: qup-spi19-cs { + pins = "gpio75"; + function = "qup19"; + drive-strength = <6>; + bias-disable; + }; + + qup_spi19_data_clk: qup-spi19-data-clk { + pins = "gpio72", "gpio73", "gpio74"; + function = "qup19"; + drive-strength = <6>; + bias-disable; + }; + + qup_spi20_cs: qup-spi20-cs { + pins = "gpio79"; + function = "qup20"; + }; + + qup_spi20_data_clk: qup-spi20-data-clk { + pins = "gpio76", "gpio77", "gpio78"; + function = "qup20"; + }; + + qup_spi21_cs: qup-spi21-cs { + pins = "gpio83"; + function = "qup21"; + }; + + qup_spi21_data_clk: qup-spi21-data-clk { + pins = "gpio80", "gpio81", "gpio82"; + function = "qup21"; + }; + qup_uart7_rx: qup-uart7-rx { pins = "gpio26"; function = "qup7"; @@ -1425,7 +3085,7 @@ reset-names = "ufsphy"; status = "disabled"; - ufs_mem_phy_lanes: lanes@1d87400 { + ufs_mem_phy_lanes: phy@1d87400 { reg = <0 0x01d87400 0 0x108>, <0 0x01d87600 0 0x1e0>, <0 0x01d87c00 0 0x1dc>, @@ -1495,6 +3155,840 @@ }; }; + thermal-zones { + aoss0-thermal { + polling-delay-passive = <0>; + polling-delay = <0>; + thermal-sensors = <&tsens0 0>; + + trips { + thermal-engine-config { + temperature = <125000>; + hysteresis = <1000>; + type = "passive"; + }; + + reset-mon-cfg { + temperature = <115000>; + hysteresis = <5000>; + type = "passive"; + }; + }; + }; + + cpuss0-thermal { + polling-delay-passive = <0>; + polling-delay = <0>; + thermal-sensors = <&tsens0 1>; + + trips { + thermal-engine-config { + temperature = <125000>; + hysteresis = <1000>; + type = "passive"; + }; + + reset-mon-cfg { + temperature = <115000>; + hysteresis = <5000>; + type = "passive"; + }; + }; + }; + + cpuss1-thermal { + polling-delay-passive = <0>; + polling-delay = <0>; + thermal-sensors = <&tsens0 2>; + + trips { + thermal-engine-config { + temperature = <125000>; + hysteresis = <1000>; + type = "passive"; + }; + + reset-mon-cfg { + temperature = <115000>; + hysteresis = <5000>; + type = "passive"; + }; + }; + }; + + cpuss3-thermal { + polling-delay-passive = <0>; + polling-delay = <0>; + thermal-sensors = <&tsens0 3>; + + trips { + thermal-engine-config { + temperature = <125000>; + hysteresis = <1000>; + type = "passive"; + }; + + reset-mon-cfg { + temperature = <115000>; + hysteresis = <5000>; + type = "passive"; + }; + }; + }; + + cpuss4-thermal { + polling-delay-passive = <0>; + polling-delay = <0>; + thermal-sensors = <&tsens0 4>; + + trips { + thermal-engine-config { + temperature = <125000>; + hysteresis = <1000>; + type = "passive"; + }; + + reset-mon-cfg { + temperature = <115000>; + hysteresis = <5000>; + type = "passive"; + }; + }; + }; + + cpu4-top-thermal { + polling-delay-passive = <0>; + polling-delay = <0>; + thermal-sensors = <&tsens0 5>; + + trips { + cpu4_top_alert0: trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu4_top_alert1: trip-point1 { + temperature = <95000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu4_top_crit: cpu_crit { + temperature = <110000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + }; + + cpu4-bottom-thermal { + polling-delay-passive = <0>; + polling-delay = <0>; + thermal-sensors = <&tsens0 6>; + + trips { + cpu4_bottom_alert0: trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu4_bottom_alert1: trip-point1 { + temperature = <95000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu4_bottom_crit: cpu_crit { + temperature = <110000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + }; + + cpu5-top-thermal { + polling-delay-passive = <0>; + polling-delay = <0>; + thermal-sensors = <&tsens0 7>; + + trips { + cpu5_top_alert0: trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu5_top_alert1: trip-point1 { + temperature = <95000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu5_top_crit: cpu_crit { + temperature = <110000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + }; + + cpu5-bottom-thermal { + polling-delay-passive = <0>; + polling-delay = <0>; + thermal-sensors = <&tsens0 8>; + + trips { + cpu5_bottom_alert0: trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu5_bottom_alert1: trip-point1 { + temperature = <95000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu5_bottom_crit: cpu_crit { + temperature = <110000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + }; + + cpu6-top-thermal { + polling-delay-passive = <0>; + polling-delay = <0>; + thermal-sensors = <&tsens0 9>; + + trips { + cpu6_top_alert0: trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu6_top_alert1: trip-point1 { + temperature = <95000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu6_top_crit: cpu_crit { + temperature = <110000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + }; + + cpu6-bottom-thermal { + polling-delay-passive = <0>; + polling-delay = <0>; + thermal-sensors = <&tsens0 10>; + + trips { + cpu6_bottom_alert0: trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu6_bottom_alert1: trip-point1 { + temperature = <95000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu6_bottom_crit: cpu_crit { + temperature = <110000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + }; + + cpu7-top-thermal { + polling-delay-passive = <0>; + polling-delay = <0>; + thermal-sensors = <&tsens0 11>; + + trips { + cpu7_top_alert0: trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu7_top_alert1: trip-point1 { + temperature = <95000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu7_top_crit: cpu_crit { + temperature = <110000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + }; + + cpu7-middle-thermal { + polling-delay-passive = <0>; + polling-delay = <0>; + thermal-sensors = <&tsens0 12>; + + trips { + cpu7_middle_alert0: trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu7_middle_alert1: trip-point1 { + temperature = <95000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu7_middle_crit: cpu_crit { + temperature = <110000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + }; + + cpu7-bottom-thermal { + polling-delay-passive = <0>; + polling-delay = <0>; + thermal-sensors = <&tsens0 13>; + + trips { + cpu7_bottom_alert0: trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu7_bottom_alert1: trip-point1 { + temperature = <95000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu7_bottom_crit: cpu_crit { + temperature = <110000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + }; + + gpu-top-thermal { + polling-delay-passive = <10>; + polling-delay = <0>; + thermal-sensors = <&tsens0 14>; + + trips { + thermal-engine-config { + temperature = <125000>; + hysteresis = <1000>; + type = "passive"; + }; + + thermal-hal-config { + temperature = <125000>; + hysteresis = <1000>; + type = "passive"; + }; + + reset-mon-cfg { + temperature = <115000>; + hysteresis = <5000>; + type = "passive"; + }; + + gpu0_tj_cfg: tj_cfg { + temperature = <95000>; + hysteresis = <5000>; + type = "passive"; + }; + }; + }; + + gpu-bottom-thermal { + polling-delay-passive = <10>; + polling-delay = <0>; + thermal-sensors = <&tsens0 15>; + + trips { + thermal-engine-config { + temperature = <125000>; + hysteresis = <1000>; + type = "passive"; + }; + + thermal-hal-config { + temperature = <125000>; + hysteresis = <1000>; + type = "passive"; + }; + + reset-mon-cfg { + temperature = <115000>; + hysteresis = <5000>; + type = "passive"; + }; + + gpu1_tj_cfg: tj_cfg { + temperature = <95000>; + hysteresis = <5000>; + type = "passive"; + }; + }; + }; + + aoss1-thermal { + polling-delay-passive = <0>; + polling-delay = <0>; + thermal-sensors = <&tsens1 0>; + + trips { + thermal-engine-config { + temperature = <125000>; + hysteresis = <1000>; + type = "passive"; + }; + + reset-mon-cfg { + temperature = <115000>; + hysteresis = <5000>; + type = "passive"; + }; + }; + }; + + cpu0-thermal { + polling-delay-passive = <0>; + polling-delay = <0>; + thermal-sensors = <&tsens1 1>; + + trips { + cpu0_alert0: trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu0_alert1: trip-point1 { + temperature = <95000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu0_crit: cpu_crit { + temperature = <110000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + }; + + cpu1-thermal { + polling-delay-passive = <0>; + polling-delay = <0>; + thermal-sensors = <&tsens1 2>; + + trips { + cpu1_alert0: trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu1_alert1: trip-point1 { + temperature = <95000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu1_crit: cpu_crit { + temperature = <110000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + }; + + cpu2-thermal { + polling-delay-passive = <0>; + polling-delay = <0>; + thermal-sensors = <&tsens1 3>; + + trips { + cpu2_alert0: trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu2_alert1: trip-point1 { + temperature = <95000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu2_crit: cpu_crit { + temperature = <110000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + }; + + cpu3-thermal { + polling-delay-passive = <0>; + polling-delay = <0>; + thermal-sensors = <&tsens1 4>; + + trips { + cpu3_alert0: trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu3_alert1: trip-point1 { + temperature = <95000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu3_crit: cpu_crit { + temperature = <110000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + }; + + cdsp0-thermal { + polling-delay-passive = <10>; + polling-delay = <0>; + thermal-sensors = <&tsens1 5>; + + trips { + thermal-engine-config { + temperature = <125000>; + hysteresis = <1000>; + type = "passive"; + }; + + thermal-hal-config { + temperature = <125000>; + hysteresis = <1000>; + type = "passive"; + }; + + reset-mon-cfg { + temperature = <115000>; + hysteresis = <5000>; + type = "passive"; + }; + + cdsp_0_config: junction-config { + temperature = <95000>; + hysteresis = <5000>; + type = "passive"; + }; + }; + }; + + cdsp1-thermal { + polling-delay-passive = <10>; + polling-delay = <0>; + thermal-sensors = <&tsens1 6>; + + trips { + thermal-engine-config { + temperature = <125000>; + hysteresis = <1000>; + type = "passive"; + }; + + thermal-hal-config { + temperature = <125000>; + hysteresis = <1000>; + type = "passive"; + }; + + reset-mon-cfg { + temperature = <115000>; + hysteresis = <5000>; + type = "passive"; + }; + + cdsp_1_config: junction-config { + temperature = <95000>; + hysteresis = <5000>; + type = "passive"; + }; + }; + }; + + cdsp2-thermal { + polling-delay-passive = <10>; + polling-delay = <0>; + thermal-sensors = <&tsens1 7>; + + trips { + thermal-engine-config { + temperature = <125000>; + hysteresis = <1000>; + type = "passive"; + }; + + thermal-hal-config { + temperature = <125000>; + hysteresis = <1000>; + type = "passive"; + }; + + reset-mon-cfg { + temperature = <115000>; + hysteresis = <5000>; + type = "passive"; + }; + + cdsp_2_config: junction-config { + temperature = <95000>; + hysteresis = <5000>; + type = "passive"; + }; + }; + }; + + video-thermal { + polling-delay-passive = <0>; + polling-delay = <0>; + thermal-sensors = <&tsens1 8>; + + trips { + thermal-engine-config { + temperature = <125000>; + hysteresis = <1000>; + type = "passive"; + }; + + reset-mon-cfg { + temperature = <115000>; + hysteresis = <5000>; + type = "passive"; + }; + }; + }; + + mem-thermal { + polling-delay-passive = <10>; + polling-delay = <0>; + thermal-sensors = <&tsens1 9>; + + trips { + thermal-engine-config { + temperature = <125000>; + hysteresis = <1000>; + type = "passive"; + }; + + ddr_config0: ddr0-config { + temperature = <90000>; + hysteresis = <5000>; + type = "passive"; + }; + + reset-mon-cfg { + temperature = <115000>; + hysteresis = <5000>; + type = "passive"; + }; + }; + }; + + modem0-thermal { + polling-delay-passive = <0>; + polling-delay = <0>; + thermal-sensors = <&tsens1 10>; + + trips { + thermal-engine-config { + temperature = <125000>; + hysteresis = <1000>; + type = "passive"; + }; + + mdmss0_config0: mdmss0-config0 { + temperature = <102000>; + hysteresis = <3000>; + type = "passive"; + }; + + mdmss0_config1: mdmss0-config1 { + temperature = <105000>; + hysteresis = <3000>; + type = "passive"; + }; + + reset-mon-cfg { + temperature = <115000>; + hysteresis = <5000>; + type = "passive"; + }; + }; + }; + + modem1-thermal { + polling-delay-passive = <0>; + polling-delay = <0>; + thermal-sensors = <&tsens1 11>; + + trips { + thermal-engine-config { + temperature = <125000>; + hysteresis = <1000>; + type = "passive"; + }; + + mdmss1_config0: mdmss1-config0 { + temperature = <102000>; + hysteresis = <3000>; + type = "passive"; + }; + + mdmss1_config1: mdmss1-config1 { + temperature = <105000>; + hysteresis = <3000>; + type = "passive"; + }; + + reset-mon-cfg { + temperature = <115000>; + hysteresis = <5000>; + type = "passive"; + }; + }; + }; + + modem2-thermal { + polling-delay-passive = <0>; + polling-delay = <0>; + thermal-sensors = <&tsens1 12>; + + trips { + thermal-engine-config { + temperature = <125000>; + hysteresis = <1000>; + type = "passive"; + }; + + mdmss2_config0: mdmss2-config0 { + temperature = <102000>; + hysteresis = <3000>; + type = "passive"; + }; + + mdmss2_config1: mdmss2-config1 { + temperature = <105000>; + hysteresis = <3000>; + type = "passive"; + }; + + reset-mon-cfg { + temperature = <115000>; + hysteresis = <5000>; + type = "passive"; + }; + }; + }; + + modem3-thermal { + polling-delay-passive = <0>; + polling-delay = <0>; + thermal-sensors = <&tsens1 13>; + + trips { + thermal-engine-config { + temperature = <125000>; + hysteresis = <1000>; + type = "passive"; + }; + + mdmss3_config0: mdmss3-config0 { + temperature = <102000>; + hysteresis = <3000>; + type = "passive"; + }; + + mdmss3_config1: mdmss3-config1 { + temperature = <105000>; + hysteresis = <3000>; + type = "passive"; + }; + + reset-mon-cfg { + temperature = <115000>; + hysteresis = <5000>; + type = "passive"; + }; + }; + }; + + camera0-thermal { + polling-delay-passive = <0>; + polling-delay = <0>; + thermal-sensors = <&tsens1 14>; + + trips { + thermal-engine-config { + temperature = <125000>; + hysteresis = <1000>; + type = "passive"; + }; + + reset-mon-cfg { + temperature = <115000>; + hysteresis = <5000>; + type = "passive"; + }; + }; + }; + + camera1-thermal { + polling-delay-passive = <0>; + polling-delay = <0>; + thermal-sensors = <&tsens1 15>; + + trips { + thermal-engine-config { + temperature = <125000>; + hysteresis = <1000>; + type = "passive"; + }; + + reset-mon-cfg { + temperature = <115000>; + hysteresis = <5000>; + type = "passive"; + }; + }; + }; + }; + timer { compatible = "arm,armv8-timer"; interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>, diff --git a/arch/arm64/boot/dts/renesas/Makefile b/arch/arm64/boot/dts/renesas/Makefile index d000f6b131dc..e66d76d42e52 100644 --- a/arch/arm64/boot/dts/renesas/Makefile +++ b/arch/arm64/boot/dts/renesas/Makefile @@ -65,6 +65,8 @@ dtb-$(CONFIG_ARCH_R8A779A0) += r8a779a0-falcon.dtb dtb-$(CONFIG_ARCH_R8A779F0) += r8a779f0-spider.dtb +dtb-$(CONFIG_ARCH_R8A779G0) += r8a779g0-white-hawk.dtb + dtb-$(CONFIG_ARCH_R8A77951) += r8a779m1-salvator-xs.dtb dtb-$(CONFIG_ARCH_R8A77951) += r8a779m1-ulcb.dtb dtb-$(CONFIG_ARCH_R8A77951) += r8a779m1-ulcb-kf.dtb @@ -75,7 +77,11 @@ dtb-$(CONFIG_ARCH_R8A77961) += r8a779m3-ulcb-kf.dtb dtb-$(CONFIG_ARCH_R8A77965) += r8a779m5-salvator-xs.dtb +dtb-$(CONFIG_ARCH_R9A07G043) += r9a07g043u11-smarc.dtb + dtb-$(CONFIG_ARCH_R9A07G044) += r9a07g044c2-smarc.dtb dtb-$(CONFIG_ARCH_R9A07G044) += r9a07g044l2-smarc.dtb dtb-$(CONFIG_ARCH_R9A07G054) += r9a07g054l2-smarc.dtb + +dtb-$(CONFIG_ARCH_R9A09G011) += r9a09g011-v2mevk2.dtb diff --git a/arch/arm64/boot/dts/renesas/beacon-renesom-baseboard.dtsi b/arch/arm64/boot/dts/renesas/beacon-renesom-baseboard.dtsi index 5ad6cd1864c1..142e7ffbd2bd 100644 --- a/arch/arm64/boot/dts/renesas/beacon-renesom-baseboard.dtsi +++ b/arch/arm64/boot/dts/renesas/beacon-renesom-baseboard.dtsi @@ -272,8 +272,14 @@ status = "okay"; }; -&du_out_rgb { - remote-endpoint = <&rgb_panel>; +&du { + ports { + port@0 { + du_out_rgb: endpoint { + remote-endpoint = <&rgb_panel>; + }; + }; + }; }; &ehci0 { diff --git a/arch/arm64/boot/dts/renesas/draak.dtsi b/arch/arm64/boot/dts/renesas/draak.dtsi index eb0327c0df48..7231f820d601 100644 --- a/arch/arm64/boot/dts/renesas/draak.dtsi +++ b/arch/arm64/boot/dts/renesas/draak.dtsi @@ -285,7 +285,7 @@ ports { port@0 { - endpoint { + du_out_rgb: endpoint { remote-endpoint = <&adv7123_in>; }; }; @@ -541,6 +541,12 @@ function = "pwm1"; }; + rpc_pins: rpc { + groups = "rpc_clk2", "rpc_ctrl", "rpc_data", "rpc_reset", + "rpc_int"; + function = "rpc"; + }; + scif2_pins: scif2 { groups = "scif2_data"; function = "scif2"; @@ -630,6 +636,58 @@ }; }; +&rpc { + pinctrl-0 = <&rpc_pins>; + pinctrl-names = "default"; + + /* Left disabled. To be enabled by firmware when unlocked. */ + + flash@0 { + compatible = "cypress,hyperflash", "cfi-flash"; + reg = <0>; + + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + bootparam@0 { + reg = <0x00000000 0x040000>; + read-only; + }; + bl2@40000 { + reg = <0x00040000 0x140000>; + read-only; + }; + cert_header_sa6@180000 { + reg = <0x00180000 0x040000>; + read-only; + }; + bl31@1c0000 { + reg = <0x001c0000 0x040000>; + read-only; + }; + tee@200000 { + reg = <0x00200000 0x440000>; + read-only; + }; + uboot@640000 { + reg = <0x00640000 0x100000>; + read-only; + }; + dtb@740000 { + reg = <0x00740000 0x080000>; + }; + kernel@7c0000 { + reg = <0x007c0000 0x1400000>; + }; + user@1bc0000 { + reg = <0x01bc0000 0x2440000>; + }; + }; + }; +}; + &rwdt { timeout-sec = <60>; status = "okay"; diff --git a/arch/arm64/boot/dts/renesas/ebisu.dtsi b/arch/arm64/boot/dts/renesas/ebisu.dtsi index 67231c8576c5..72f359efa23e 100644 --- a/arch/arm64/boot/dts/renesas/ebisu.dtsi +++ b/arch/arm64/boot/dts/renesas/ebisu.dtsi @@ -356,7 +356,7 @@ ports { port@0 { - endpoint { + du_out_rgb: endpoint { remote-endpoint = <&adv7123_in>; }; }; @@ -600,6 +600,12 @@ function = "pwm5"; }; + rpc_pins: rpc { + groups = "rpc_clk2", "rpc_ctrl", "rpc_data", "rpc_reset", + "rpc_int"; + function = "rpc"; + }; + scif2_pins: scif2 { groups = "scif2_data_a"; function = "scif2"; @@ -711,6 +717,58 @@ }; +&rpc { + pinctrl-0 = <&rpc_pins>; + pinctrl-names = "default"; + + /* Left disabled. To be enabled by firmware when unlocked. */ + + flash@0 { + compatible = "cypress,hyperflash", "cfi-flash"; + reg = <0>; + + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + bootparam@0 { + reg = <0x00000000 0x040000>; + read-only; + }; + bl2@40000 { + reg = <0x00040000 0x140000>; + read-only; + }; + cert_header_sa6@180000 { + reg = <0x00180000 0x040000>; + read-only; + }; + bl31@1c0000 { + reg = <0x001c0000 0x040000>; + read-only; + }; + tee@200000 { + reg = <0x00200000 0x440000>; + read-only; + }; + uboot@640000 { + reg = <0x00640000 0x100000>; + read-only; + }; + dtb@740000 { + reg = <0x00740000 0x080000>; + }; + kernel@7c0000 { + reg = <0x007c0000 0x1400000>; + }; + user@1bc0000 { + reg = <0x01bc0000 0x2440000>; + }; + }; + }; +}; + &rwdt { timeout-sec = <60>; status = "okay"; diff --git a/arch/arm64/boot/dts/renesas/r8a774a1.dtsi b/arch/arm64/boot/dts/renesas/r8a774a1.dtsi index 12846125a4c9..e7d17776624d 100644 --- a/arch/arm64/boot/dts/renesas/r8a774a1.dtsi +++ b/arch/arm64/boot/dts/renesas/r8a774a1.dtsi @@ -283,6 +283,7 @@ compatible = "renesas,r8a774a1-wdt", "renesas,rcar-gen3-wdt"; reg = <0 0xe6020000 0 0x0c>; + interrupts = <GIC_SPI 140 IRQ_TYPE_LEVEL_HIGH>; clocks = <&cpg CPG_MOD 402>; power-domains = <&sysc R8A774A1_PD_ALWAYS_ON>; resets = <&cpg 402>; @@ -1178,6 +1179,7 @@ reg = <0 0xe66c0000 0 0x8000>; interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "ch_int", "g_int"; clocks = <&cpg CPG_MOD 914>, <&cpg CPG_CORE R8A774A1_CLK_CANFD>, <&can_clk>; @@ -2737,8 +2739,6 @@ port@0 { reg = <0>; - du_out_rgb: endpoint { - }; }; port@1 { reg = <1>; @@ -2775,8 +2775,6 @@ }; port@1 { reg = <1>; - lvds0_out: endpoint { - }; }; }; }; diff --git a/arch/arm64/boot/dts/renesas/r8a774b1.dtsi b/arch/arm64/boot/dts/renesas/r8a774b1.dtsi index a4b406a346f9..f62d95760e82 100644 --- a/arch/arm64/boot/dts/renesas/r8a774b1.dtsi +++ b/arch/arm64/boot/dts/renesas/r8a774b1.dtsi @@ -156,6 +156,7 @@ compatible = "renesas,r8a774b1-wdt", "renesas,rcar-gen3-wdt"; reg = <0 0xe6020000 0 0x0c>; + interrupts = <GIC_SPI 140 IRQ_TYPE_LEVEL_HIGH>; clocks = <&cpg CPG_MOD 402>; power-domains = <&sysc R8A774B1_PD_ALWAYS_ON>; resets = <&cpg 402>; @@ -1051,6 +1052,7 @@ reg = <0 0xe66c0000 0 0x8000>; interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "ch_int", "g_int"; clocks = <&cpg CPG_MOD 914>, <&cpg CPG_CORE R8A774B1_CLK_CANFD>, <&can_clk>; @@ -2582,8 +2584,6 @@ port@0 { reg = <0>; - du_out_rgb: endpoint { - }; }; port@1 { reg = <1>; @@ -2620,8 +2620,6 @@ }; port@1 { reg = <1>; - lvds0_out: endpoint { - }; }; }; }; diff --git a/arch/arm64/boot/dts/renesas/r8a774c0-cat874.dts b/arch/arm64/boot/dts/renesas/r8a774c0-cat874.dts index 4e72e4f2bab0..5a6ea08ffd2b 100644 --- a/arch/arm64/boot/dts/renesas/r8a774c0-cat874.dts +++ b/arch/arm64/boot/dts/renesas/r8a774c0-cat874.dts @@ -172,7 +172,7 @@ ports { port@0 { - endpoint { + du_out_rgb: endpoint { remote-endpoint = <&tda19988_in>; }; }; diff --git a/arch/arm64/boot/dts/renesas/r8a774c0.dtsi b/arch/arm64/boot/dts/renesas/r8a774c0.dtsi index e123c8d1bab9..b6aeb22e8836 100644 --- a/arch/arm64/boot/dts/renesas/r8a774c0.dtsi +++ b/arch/arm64/boot/dts/renesas/r8a774c0.dtsi @@ -145,6 +145,7 @@ compatible = "renesas,r8a774c0-wdt", "renesas,rcar-gen3-wdt"; reg = <0 0xe6020000 0 0x0c>; + interrupts = <GIC_SPI 140 IRQ_TYPE_LEVEL_HIGH>; clocks = <&cpg CPG_MOD 402>; power-domains = <&sysc R8A774C0_PD_ALWAYS_ON>; resets = <&cpg 402>; @@ -1008,6 +1009,7 @@ reg = <0 0xe66c0000 0 0x8000>; interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "ch_int", "g_int"; clocks = <&cpg CPG_MOD 914>, <&cpg CPG_CORE R8A774C0_CLK_CANFD>, <&can_clk>; @@ -1870,8 +1872,6 @@ port@0 { reg = <0>; - du_out_rgb: endpoint { - }; }; port@1 { @@ -1913,8 +1913,6 @@ port@1 { reg = <1>; - lvds0_out: endpoint { - }; }; }; }; @@ -1940,8 +1938,6 @@ port@1 { reg = <1>; - lvds1_out: endpoint { - }; }; }; }; diff --git a/arch/arm64/boot/dts/renesas/r8a774e1.dtsi b/arch/arm64/boot/dts/renesas/r8a774e1.dtsi index 989c1c00dcdc..8ec59094882b 100644 --- a/arch/arm64/boot/dts/renesas/r8a774e1.dtsi +++ b/arch/arm64/boot/dts/renesas/r8a774e1.dtsi @@ -1280,6 +1280,7 @@ reg = <0 0xe66c0000 0 0x8000>; interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "ch_int", "g_int"; clocks = <&cpg CPG_MOD 914>, <&cpg CPG_CORE R8A774E1_CLK_CANFD>, <&can_clk>; @@ -2857,8 +2858,6 @@ port@0 { reg = <0>; - du_out_rgb: endpoint { - }; }; port@1 { reg = <1>; @@ -2895,8 +2894,6 @@ }; port@1 { reg = <1>; - lvds0_out: endpoint { - }; }; }; }; diff --git a/arch/arm64/boot/dts/renesas/r8a77951.dtsi b/arch/arm64/boot/dts/renesas/r8a77951.dtsi index 4e87e8776a2b..a297af22a195 100644 --- a/arch/arm64/boot/dts/renesas/r8a77951.dtsi +++ b/arch/arm64/boot/dts/renesas/r8a77951.dtsi @@ -369,6 +369,7 @@ rwdt: watchdog@e6020000 { compatible = "renesas,r8a7795-wdt", "renesas,rcar-gen3-wdt"; reg = <0 0xe6020000 0 0x0c>; + interrupts = <GIC_SPI 140 IRQ_TYPE_LEVEL_HIGH>; clocks = <&cpg CPG_MOD 402>; power-domains = <&sysc R8A7795_PD_ALWAYS_ON>; resets = <&cpg 402>; @@ -1367,6 +1368,7 @@ reg = <0 0xe66c0000 0 0x8000>; interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "ch_int", "g_int"; clocks = <&cpg CPG_MOD 914>, <&cpg CPG_CORE R8A7795_CLK_CANFD>, <&can_clk>; @@ -2731,6 +2733,22 @@ status = "disabled"; }; + rpc: spi@ee200000 { + compatible = "renesas,r8a7795-rpc-if", + "renesas,rcar-gen3-rpc-if"; + reg = <0 0xee200000 0 0x200>, + <0 0x08000000 0 0x04000000>, + <0 0xee208000 0 0x100>; + reg-names = "regs", "dirmap", "wbuf"; + interrupts = <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 917>; + power-domains = <&sysc R8A7795_PD_ALWAYS_ON>; + resets = <&cpg 917>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + sata: sata@ee300000 { compatible = "renesas,sata-r8a7795", "renesas,rcar-gen3-sata"; @@ -3334,8 +3352,6 @@ port@0 { reg = <0>; - du_out_rgb: endpoint { - }; }; port@1 { reg = <1>; @@ -3378,8 +3394,6 @@ }; port@1 { reg = <1>; - lvds0_out: endpoint { - }; }; }; }; diff --git a/arch/arm64/boot/dts/renesas/r8a77960.dtsi b/arch/arm64/boot/dts/renesas/r8a77960.dtsi index 6f79da8cc8c0..4159c23d3874 100644 --- a/arch/arm64/boot/dts/renesas/r8a77960.dtsi +++ b/arch/arm64/boot/dts/renesas/r8a77960.dtsi @@ -334,6 +334,7 @@ compatible = "renesas,r8a7796-wdt", "renesas,rcar-gen3-wdt"; reg = <0 0xe6020000 0 0x0c>; + interrupts = <GIC_SPI 140 IRQ_TYPE_LEVEL_HIGH>; clocks = <&cpg CPG_MOD 402>; power-domains = <&sysc R8A7796_PD_ALWAYS_ON>; resets = <&cpg 402>; @@ -1239,6 +1240,7 @@ reg = <0 0xe66c0000 0 0x8000>; interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "ch_int", "g_int"; clocks = <&cpg CPG_MOD 914>, <&cpg CPG_CORE R8A7796_CLK_CANFD>, <&can_clk>; @@ -2531,6 +2533,22 @@ status = "disabled"; }; + rpc: spi@ee200000 { + compatible = "renesas,r8a7796-rpc-if", + "renesas,rcar-gen3-rpc-if"; + reg = <0 0xee200000 0 0x200>, + <0 0x08000000 0 0x04000000>, + <0 0xee208000 0 0x100>; + reg-names = "regs", "dirmap", "wbuf"; + interrupts = <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 917>; + power-domains = <&sysc R8A7796_PD_ALWAYS_ON>; + resets = <&cpg 917>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + gic: interrupt-controller@f1010000 { compatible = "arm,gic-400"; #interrupt-cells = <3>; @@ -2937,8 +2955,6 @@ port@0 { reg = <0>; - du_out_rgb: endpoint { - }; }; port@1 { reg = <1>; @@ -2975,8 +2991,6 @@ }; port@1 { reg = <1>; - lvds0_out: endpoint { - }; }; }; }; diff --git a/arch/arm64/boot/dts/renesas/r8a77961.dtsi b/arch/arm64/boot/dts/renesas/r8a77961.dtsi index 68cbbb322acf..3c744b7d0dc4 100644 --- a/arch/arm64/boot/dts/renesas/r8a77961.dtsi +++ b/arch/arm64/boot/dts/renesas/r8a77961.dtsi @@ -323,6 +323,7 @@ compatible = "renesas,r8a77961-wdt", "renesas,rcar-gen3-wdt"; reg = <0 0xe6020000 0 0x0c>; + interrupts = <GIC_SPI 140 IRQ_TYPE_LEVEL_HIGH>; clocks = <&cpg CPG_MOD 402>; power-domains = <&sysc R8A77961_PD_ALWAYS_ON>; resets = <&cpg 402>; @@ -1222,6 +1223,32 @@ status = "disabled"; }; + canfd: can@e66c0000 { + compatible = "renesas,r8a77961-canfd", + "renesas,rcar-gen3-canfd"; + reg = <0 0xe66c0000 0 0x8000>; + interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "ch_int", "g_int"; + clocks = <&cpg CPG_MOD 914>, + <&cpg CPG_CORE R8A77961_CLK_CANFD>, + <&can_clk>; + clock-names = "fck", "canfd", "can_clk"; + assigned-clocks = <&cpg CPG_CORE R8A77961_CLK_CANFD>; + assigned-clock-rates = <40000000>; + power-domains = <&sysc R8A77961_PD_ALWAYS_ON>; + resets = <&cpg 914>; + status = "disabled"; + + channel0 { + status = "disabled"; + }; + + channel1 { + status = "disabled"; + }; + }; + pwm0: pwm@e6e30000 { compatible = "renesas,pwm-r8a77961", "renesas,pwm-rcar"; reg = <0 0xe6e30000 0 8>; @@ -2375,6 +2402,22 @@ status = "disabled"; }; + rpc: spi@ee200000 { + compatible = "renesas,r8a77961-rpc-if", + "renesas,rcar-gen3-rpc-if"; + reg = <0 0xee200000 0 0x200>, + <0 0x08000000 0 0x04000000>, + <0 0xee208000 0 0x100>; + reg-names = "regs", "dirmap", "wbuf"; + interrupts = <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 917>; + power-domains = <&sysc R8A77961_PD_ALWAYS_ON>; + resets = <&cpg 917>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + gic: interrupt-controller@f1010000 { compatible = "arm,gic-400"; #interrupt-cells = <3>; @@ -2722,8 +2765,6 @@ port@0 { reg = <0>; - du_out_rgb: endpoint { - }; }; port@1 { reg = <1>; @@ -2760,8 +2801,6 @@ }; port@1 { reg = <1>; - lvds0_out: endpoint { - }; }; }; }; diff --git a/arch/arm64/boot/dts/renesas/r8a77965.dtsi b/arch/arm64/boot/dts/renesas/r8a77965.dtsi index 9f858af8b762..21a5e1cdd9f1 100644 --- a/arch/arm64/boot/dts/renesas/r8a77965.dtsi +++ b/arch/arm64/boot/dts/renesas/r8a77965.dtsi @@ -205,6 +205,7 @@ compatible = "renesas,r8a77965-wdt", "renesas,rcar-gen3-wdt"; reg = <0 0xe6020000 0 0x0c>; + interrupts = <GIC_SPI 140 IRQ_TYPE_LEVEL_HIGH>; clocks = <&cpg CPG_MOD 402>; power-domains = <&sysc R8A77965_PD_ALWAYS_ON>; resets = <&cpg 402>; @@ -1102,6 +1103,7 @@ reg = <0 0xe66c0000 0 0x8000>; interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "ch_int", "g_int"; clocks = <&cpg CPG_MOD 914>, <&cpg CPG_CORE R8A77965_CLK_CANFD>, <&can_clk>; @@ -2378,6 +2380,22 @@ status = "disabled"; }; + rpc: spi@ee200000 { + compatible = "renesas,r8a77965-rpc-if", + "renesas,rcar-gen3-rpc-if"; + reg = <0 0xee200000 0 0x200>, + <0 0x08000000 0 0x04000000>, + <0 0xee208000 0 0x100>; + reg-names = "regs", "dirmap", "wbuf"; + interrupts = <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 917>; + power-domains = <&sysc R8A77965_PD_ALWAYS_ON>; + resets = <&cpg 917>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + sata: sata@ee300000 { compatible = "renesas,sata-r8a77965", "renesas,rcar-gen3-sata"; @@ -2749,8 +2767,6 @@ port@0 { reg = <0>; - du_out_rgb: endpoint { - }; }; port@1 { reg = <1>; @@ -2787,8 +2803,6 @@ }; port@1 { reg = <1>; - lvds0_out: endpoint { - }; }; }; }; diff --git a/arch/arm64/boot/dts/renesas/r8a77970.dtsi b/arch/arm64/boot/dts/renesas/r8a77970.dtsi index 517892cf6294..2703ef3a38c2 100644 --- a/arch/arm64/boot/dts/renesas/r8a77970.dtsi +++ b/arch/arm64/boot/dts/renesas/r8a77970.dtsi @@ -108,6 +108,7 @@ compatible = "renesas,r8a77970-wdt", "renesas,rcar-gen3-wdt"; reg = <0 0xe6020000 0 0x0c>; + interrupts = <GIC_SPI 140 IRQ_TYPE_LEVEL_HIGH>; clocks = <&cpg CPG_MOD 402>; power-domains = <&sysc R8A77970_PD_ALWAYS_ON>; resets = <&cpg 402>; @@ -556,6 +557,7 @@ reg = <0 0xe66c0000 0 0x8000>; interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "ch_int", "g_int"; clocks = <&cpg CPG_MOD 914>, <&cpg CPG_CORE R8A77970_CLK_CANFD>, <&can_clk>; @@ -1156,8 +1158,6 @@ port@0 { reg = <0>; - du_out_rgb: endpoint { - }; }; port@1 { @@ -1190,8 +1190,6 @@ }; port@1 { reg = <1>; - lvds0_out: endpoint { - }; }; }; }; diff --git a/arch/arm64/boot/dts/renesas/r8a77980.dtsi b/arch/arm64/boot/dts/renesas/r8a77980.dtsi index 347c068ff2c5..8594be72f221 100644 --- a/arch/arm64/boot/dts/renesas/r8a77980.dtsi +++ b/arch/arm64/boot/dts/renesas/r8a77980.dtsi @@ -138,6 +138,7 @@ compatible = "renesas,r8a77980-wdt", "renesas,rcar-gen3-wdt"; reg = <0 0xe6020000 0 0x0c>; + interrupts = <GIC_SPI 140 IRQ_TYPE_LEVEL_HIGH>; clocks = <&cpg CPG_MOD 402>; power-domains = <&sysc R8A77980_PD_ALWAYS_ON>; resets = <&cpg 402>; @@ -608,6 +609,7 @@ reg = <0 0xe66c0000 0 0x8000>; interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "ch_int", "g_int"; clocks = <&cpg CPG_MOD 914>, <&cpg CPG_CORE R8A77980_CLK_CANFD>, <&can_clk>; @@ -1533,8 +1535,6 @@ port@0 { reg = <0>; - du_out_rgb: endpoint { - }; }; port@1 { @@ -1568,8 +1568,6 @@ port@1 { reg = <1>; - lvds0_out: endpoint { - }; }; }; }; diff --git a/arch/arm64/boot/dts/renesas/r8a77990.dtsi b/arch/arm64/boot/dts/renesas/r8a77990.dtsi index 7e0f1aab2135..d33021202637 100644 --- a/arch/arm64/boot/dts/renesas/r8a77990.dtsi +++ b/arch/arm64/boot/dts/renesas/r8a77990.dtsi @@ -171,6 +171,7 @@ compatible = "renesas,r8a77990-wdt", "renesas,rcar-gen3-wdt"; reg = <0 0xe6020000 0 0x0c>; + interrupts = <GIC_SPI 140 IRQ_TYPE_LEVEL_HIGH>; clocks = <&cpg CPG_MOD 402>; power-domains = <&sysc R8A77990_PD_ALWAYS_ON>; resets = <&cpg 402>; @@ -1051,6 +1052,7 @@ reg = <0 0xe66c0000 0 0x8000>; interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "ch_int", "g_int"; clocks = <&cpg CPG_MOD 914>, <&cpg CPG_CORE R8A77990_CLK_CANFD>, <&can_clk>; @@ -1837,6 +1839,22 @@ status = "disabled"; }; + rpc: spi@ee200000 { + compatible = "renesas,r8a77990-rpc-if", + "renesas,rcar-gen3-rpc-if"; + reg = <0 0xee200000 0 0x200>, + <0 0x08000000 0 0x04000000>, + <0 0xee208000 0 0x100>; + reg-names = "regs", "dirmap", "wbuf"; + interrupts = <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 917>; + power-domains = <&sysc R8A77990_PD_ALWAYS_ON>; + resets = <&cpg 917>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + gic: interrupt-controller@f1010000 { compatible = "arm,gic-400"; #interrupt-cells = <3>; @@ -2031,8 +2049,6 @@ port@0 { reg = <0>; - du_out_rgb: endpoint { - }; }; port@1 { @@ -2074,8 +2090,6 @@ port@1 { reg = <1>; - lvds0_out: endpoint { - }; }; }; }; @@ -2101,8 +2115,6 @@ port@1 { reg = <1>; - lvds1_out: endpoint { - }; }; }; }; diff --git a/arch/arm64/boot/dts/renesas/r8a77995.dtsi b/arch/arm64/boot/dts/renesas/r8a77995.dtsi index cac1f9467ffa..f040d03e0a87 100644 --- a/arch/arm64/boot/dts/renesas/r8a77995.dtsi +++ b/arch/arm64/boot/dts/renesas/r8a77995.dtsi @@ -94,6 +94,7 @@ compatible = "renesas,r8a77995-wdt", "renesas,rcar-gen3-wdt"; reg = <0 0xe6020000 0 0x0c>; + interrupts = <GIC_SPI 140 IRQ_TYPE_LEVEL_HIGH>; clocks = <&cpg CPG_MOD 402>; power-domains = <&sysc R8A77995_PD_ALWAYS_ON>; resets = <&cpg 402>; @@ -556,6 +557,7 @@ reg = <0 0xe66c0000 0 0x8000>; interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "ch_int", "g_int"; clocks = <&cpg CPG_MOD 914>, <&cpg CPG_CORE R8A77995_CLK_CANFD>, <&can_clk>; @@ -1237,6 +1239,22 @@ status = "disabled"; }; + rpc: spi@ee200000 { + compatible = "renesas,r8a77995-rpc-if", + "renesas,rcar-gen3-rpc-if"; + reg = <0 0xee200000 0 0x200>, + <0 0x08000000 0 0x04000000>, + <0 0xee208000 0 0x100>; + reg-names = "regs", "dirmap", "wbuf"; + interrupts = <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 917>; + power-domains = <&sysc R8A77995_PD_ALWAYS_ON>; + resets = <&cpg 917>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + gic: interrupt-controller@f1010000 { compatible = "arm,gic-400"; #interrupt-cells = <3>; @@ -1350,8 +1368,6 @@ port@0 { reg = <0>; - du_out_rgb: endpoint { - }; }; port@1 { @@ -1393,8 +1409,6 @@ port@1 { reg = <1>; - lvds0_out: endpoint { - }; }; }; }; @@ -1420,8 +1434,6 @@ port@1 { reg = <1>; - lvds1_out: endpoint { - }; }; }; }; diff --git a/arch/arm64/boot/dts/renesas/r8a779a0-falcon-cpu.dtsi b/arch/arm64/boot/dts/renesas/r8a779a0-falcon-cpu.dtsi index 6af3f4f4f268..53c4a26198e3 100644 --- a/arch/arm64/boot/dts/renesas/r8a779a0-falcon-cpu.dtsi +++ b/arch/arm64/boot/dts/renesas/r8a779a0-falcon-cpu.dtsi @@ -192,14 +192,17 @@ clock-frequency = <400000>; bridge@2c { + pinctrl-0 = <&irq0_pins>; + pinctrl-names = "default"; + compatible = "ti,sn65dsi86"; reg = <0x2c>; clocks = <&sn65dsi86_refclk>; clock-names = "refclk"; - interrupt-parent = <&gpio1>; - interrupts = <24 IRQ_TYPE_LEVEL_HIGH>; + interrupt-parent = <&intc_ex>; + interrupts = <0 IRQ_TYPE_LEVEL_HIGH>; vccio-supply = <®_1p8v>; vpll-supply = <®_1p8v>; @@ -271,6 +274,11 @@ function = "i2c6"; }; + irq0_pins: irq0 { + groups = "intc_ex_irq0"; + function = "intc_ex"; + }; + keys_pins: keys { pins = "GP_6_18", "GP_6_19", "GP_6_20"; bias-pull-up; diff --git a/arch/arm64/boot/dts/renesas/r8a779a0-falcon.dts b/arch/arm64/boot/dts/renesas/r8a779a0-falcon.dts index e46dc9aa0a43..b2e67b82caf6 100644 --- a/arch/arm64/boot/dts/renesas/r8a779a0-falcon.dts +++ b/arch/arm64/boot/dts/renesas/r8a779a0-falcon.dts @@ -37,6 +37,20 @@ }; }; +&canfd { + pinctrl-0 = <&canfd0_pins>, <&canfd1_pins>; + pinctrl-names = "default"; + status = "okay"; + + channel0 { + status = "okay"; + }; + + channel1 { + status = "okay"; + }; +}; + &i2c0 { eeprom@51 { compatible = "rohm,br24g01", "atmel,24c01"; @@ -65,4 +79,14 @@ }; }; + + canfd0_pins: canfd0 { + groups = "canfd0_data"; + function = "canfd0"; + }; + + canfd1_pins: canfd1 { + groups = "canfd1_data"; + function = "canfd1"; + }; }; diff --git a/arch/arm64/boot/dts/renesas/r8a779a0.dtsi b/arch/arm64/boot/dts/renesas/r8a779a0.dtsi index c4be288b1912..b9731504b7cd 100644 --- a/arch/arm64/boot/dts/renesas/r8a779a0.dtsi +++ b/arch/arm64/boot/dts/renesas/r8a779a0.dtsi @@ -24,6 +24,13 @@ i2c6 = &i2c6; }; + /* External CAN clock - to be overridden by boards that provide it */ + can_clk: can { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <0>; + }; + cpus { #address-cells = <1>; #size-cells = <0>; @@ -79,8 +86,9 @@ rwdt: watchdog@e6020000 { compatible = "renesas,r8a779a0-wdt", - "renesas,rcar-gen3-wdt"; + "renesas,rcar-gen4-wdt"; reg = <0 0xe6020000 0 0x0c>; + interrupts = <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>; clocks = <&cpg CPG_MOD 907>; power-domains = <&sysc R8A779A0_PD_ALWAYS_ON>; resets = <&cpg 907>; @@ -422,7 +430,7 @@ i2c0: i2c@e6500000 { compatible = "renesas,i2c-r8a779a0", - "renesas,rcar-gen3-i2c"; + "renesas,rcar-gen4-i2c"; reg = <0 0xe6500000 0 0x40>; interrupts = <GIC_SPI 238 IRQ_TYPE_LEVEL_HIGH>; clocks = <&cpg CPG_MOD 518>; @@ -438,7 +446,7 @@ i2c1: i2c@e6508000 { compatible = "renesas,i2c-r8a779a0", - "renesas,rcar-gen3-i2c"; + "renesas,rcar-gen4-i2c"; reg = <0 0xe6508000 0 0x40>; interrupts = <GIC_SPI 239 IRQ_TYPE_LEVEL_HIGH>; clocks = <&cpg CPG_MOD 519>; @@ -454,7 +462,7 @@ i2c2: i2c@e6510000 { compatible = "renesas,i2c-r8a779a0", - "renesas,rcar-gen3-i2c"; + "renesas,rcar-gen4-i2c"; reg = <0 0xe6510000 0 0x40>; interrupts = <GIC_SPI 240 IRQ_TYPE_LEVEL_HIGH>; clocks = <&cpg CPG_MOD 520>; @@ -470,7 +478,7 @@ i2c3: i2c@e66d0000 { compatible = "renesas,i2c-r8a779a0", - "renesas,rcar-gen3-i2c"; + "renesas,rcar-gen4-i2c"; reg = <0 0xe66d0000 0 0x40>; interrupts = <GIC_SPI 241 IRQ_TYPE_LEVEL_HIGH>; clocks = <&cpg CPG_MOD 521>; @@ -486,7 +494,7 @@ i2c4: i2c@e66d8000 { compatible = "renesas,i2c-r8a779a0", - "renesas,rcar-gen3-i2c"; + "renesas,rcar-gen4-i2c"; reg = <0 0xe66d8000 0 0x40>; interrupts = <GIC_SPI 242 IRQ_TYPE_LEVEL_HIGH>; clocks = <&cpg CPG_MOD 522>; @@ -502,7 +510,7 @@ i2c5: i2c@e66e0000 { compatible = "renesas,i2c-r8a779a0", - "renesas,rcar-gen3-i2c"; + "renesas,rcar-gen4-i2c"; reg = <0 0xe66e0000 0 0x40>; interrupts = <GIC_SPI 243 IRQ_TYPE_LEVEL_HIGH>; clocks = <&cpg CPG_MOD 523>; @@ -518,7 +526,7 @@ i2c6: i2c@e66e8000 { compatible = "renesas,i2c-r8a779a0", - "renesas,rcar-gen3-i2c"; + "renesas,rcar-gen4-i2c"; reg = <0 0xe66e8000 0 0x40>; interrupts = <GIC_SPI 244 IRQ_TYPE_LEVEL_HIGH>; clocks = <&cpg CPG_MOD 524>; @@ -534,7 +542,7 @@ hscif0: serial@e6540000 { compatible = "renesas,hscif-r8a779a0", - "renesas,rcar-gen3-hscif", "renesas,hscif"; + "renesas,rcar-gen4-hscif", "renesas,hscif"; reg = <0 0xe6540000 0 0x60>; interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>; clocks = <&cpg CPG_MOD 514>, @@ -550,7 +558,7 @@ hscif1: serial@e6550000 { compatible = "renesas,hscif-r8a779a0", - "renesas,rcar-gen3-hscif", "renesas,hscif"; + "renesas,rcar-gen4-hscif", "renesas,hscif"; reg = <0 0xe6550000 0 0x60>; interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>; clocks = <&cpg CPG_MOD 515>, @@ -566,7 +574,7 @@ hscif2: serial@e6560000 { compatible = "renesas,hscif-r8a779a0", - "renesas,rcar-gen3-hscif", "renesas,hscif"; + "renesas,rcar-gen4-hscif", "renesas,hscif"; reg = <0 0xe6560000 0 0x60>; interrupts = <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>; clocks = <&cpg CPG_MOD 516>, @@ -582,7 +590,7 @@ hscif3: serial@e66a0000 { compatible = "renesas,hscif-r8a779a0", - "renesas,rcar-gen3-hscif", "renesas,hscif"; + "renesas,rcar-gen4-hscif", "renesas,hscif"; reg = <0 0xe66a0000 0 0x60>; interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>; clocks = <&cpg CPG_MOD 517>, @@ -596,6 +604,55 @@ status = "disabled"; }; + canfd: can@e6660000 { + compatible = "renesas,r8a779a0-canfd"; + reg = <0 0xe6660000 0 0x8000>; + interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "ch_int", "g_int"; + clocks = <&cpg CPG_MOD 328>, + <&cpg CPG_CORE R8A779A0_CLK_CANFD>, + <&can_clk>; + clock-names = "fck", "canfd", "can_clk"; + assigned-clocks = <&cpg CPG_CORE R8A779A0_CLK_CANFD>; + assigned-clock-rates = <80000000>; + power-domains = <&sysc R8A779A0_PD_ALWAYS_ON>; + resets = <&cpg 328>; + status = "disabled"; + + channel0 { + status = "disabled"; + }; + + channel1 { + status = "disabled"; + }; + + channel2 { + status = "disabled"; + }; + + channel3 { + status = "disabled"; + }; + + channel4 { + status = "disabled"; + }; + + channel5 { + status = "disabled"; + }; + + channel6 { + status = "disabled"; + }; + + channel7 { + status = "disabled"; + }; + }; + avb0: ethernet@e6800000 { compatible = "renesas,etheravb-r8a779a0", "renesas,etheravb-rcar-gen3"; @@ -886,7 +943,7 @@ scif0: serial@e6e60000 { compatible = "renesas,scif-r8a779a0", - "renesas,rcar-gen3-scif", "renesas,scif"; + "renesas,rcar-gen4-scif", "renesas,scif"; reg = <0 0xe6e60000 0 64>; interrupts = <GIC_SPI 251 IRQ_TYPE_LEVEL_HIGH>; clocks = <&cpg CPG_MOD 702>, @@ -902,7 +959,7 @@ scif1: serial@e6e68000 { compatible = "renesas,scif-r8a779a0", - "renesas,rcar-gen3-scif", "renesas,scif"; + "renesas,rcar-gen4-scif", "renesas,scif"; reg = <0 0xe6e68000 0 64>; interrupts = <GIC_SPI 252 IRQ_TYPE_LEVEL_HIGH>; clocks = <&cpg CPG_MOD 703>, @@ -918,7 +975,7 @@ scif3: serial@e6c50000 { compatible = "renesas,scif-r8a779a0", - "renesas,rcar-gen3-scif", "renesas,scif"; + "renesas,rcar-gen4-scif", "renesas,scif"; reg = <0 0xe6c50000 0 64>; interrupts = <GIC_SPI 253 IRQ_TYPE_LEVEL_HIGH>; clocks = <&cpg CPG_MOD 704>, @@ -934,7 +991,7 @@ scif4: serial@e6c40000 { compatible = "renesas,scif-r8a779a0", - "renesas,rcar-gen3-scif", "renesas,scif"; + "renesas,rcar-gen4-scif", "renesas,scif"; reg = <0 0xe6c40000 0 64>; interrupts = <GIC_SPI 254 IRQ_TYPE_LEVEL_HIGH>; clocks = <&cpg CPG_MOD 705>, @@ -1946,7 +2003,8 @@ }; dmac1: dma-controller@e7350000 { - compatible = "renesas,dmac-r8a779a0"; + compatible = "renesas,dmac-r8a779a0", + "renesas,rcar-gen4-dmac"; reg = <0 0xe7350000 0 0x1000>, <0 0xe7300000 0 0x10000>; interrupts = <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>, @@ -1980,7 +2038,8 @@ }; dmac2: dma-controller@e7351000 { - compatible = "renesas,dmac-r8a779a0"; + compatible = "renesas,dmac-r8a779a0", + "renesas,rcar-gen4-dmac"; reg = <0 0xe7351000 0 0x1000>, <0 0xe7310000 0 0x10000>; interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>, @@ -2035,7 +2094,8 @@ }; ipmmu_rt0: iommu@ee480000 { - compatible = "renesas,ipmmu-r8a779a0"; + compatible = "renesas,ipmmu-r8a779a0", + "renesas,rcar-gen4-ipmmu-vmsa"; reg = <0 0xee480000 0 0x20000>; renesas,ipmmu-main = <&ipmmu_mm 10>; power-domains = <&sysc R8A779A0_PD_ALWAYS_ON>; @@ -2043,7 +2103,8 @@ }; ipmmu_rt1: iommu@ee4c0000 { - compatible = "renesas,ipmmu-r8a779a0"; + compatible = "renesas,ipmmu-r8a779a0", + "renesas,rcar-gen4-ipmmu-vmsa"; reg = <0 0xee4c0000 0 0x20000>; renesas,ipmmu-main = <&ipmmu_mm 19>; power-domains = <&sysc R8A779A0_PD_ALWAYS_ON>; @@ -2051,7 +2112,8 @@ }; ipmmu_ds0: iommu@eed00000 { - compatible = "renesas,ipmmu-r8a779a0"; + compatible = "renesas,ipmmu-r8a779a0", + "renesas,rcar-gen4-ipmmu-vmsa"; reg = <0 0xeed00000 0 0x20000>; renesas,ipmmu-main = <&ipmmu_mm 0>; power-domains = <&sysc R8A779A0_PD_ALWAYS_ON>; @@ -2059,7 +2121,8 @@ }; ipmmu_ds1: iommu@eed40000 { - compatible = "renesas,ipmmu-r8a779a0"; + compatible = "renesas,ipmmu-r8a779a0", + "renesas,rcar-gen4-ipmmu-vmsa"; reg = <0 0xeed40000 0 0x20000>; renesas,ipmmu-main = <&ipmmu_mm 1>; power-domains = <&sysc R8A779A0_PD_ALWAYS_ON>; @@ -2067,7 +2130,8 @@ }; ipmmu_ir: iommu@eed80000 { - compatible = "renesas,ipmmu-r8a779a0"; + compatible = "renesas,ipmmu-r8a779a0", + "renesas,rcar-gen4-ipmmu-vmsa"; reg = <0 0xeed80000 0 0x20000>; renesas,ipmmu-main = <&ipmmu_mm 3>; power-domains = <&sysc R8A779A0_PD_A3IR>; @@ -2075,7 +2139,8 @@ }; ipmmu_vc0: iommu@eedc0000 { - compatible = "renesas,ipmmu-r8a779a0"; + compatible = "renesas,ipmmu-r8a779a0", + "renesas,rcar-gen4-ipmmu-vmsa"; reg = <0 0xeedc0000 0 0x20000>; renesas,ipmmu-main = <&ipmmu_mm 12>; power-domains = <&sysc R8A779A0_PD_ALWAYS_ON>; @@ -2083,7 +2148,8 @@ }; ipmmu_vi0: iommu@eee80000 { - compatible = "renesas,ipmmu-r8a779a0"; + compatible = "renesas,ipmmu-r8a779a0", + "renesas,rcar-gen4-ipmmu-vmsa"; reg = <0 0xeee80000 0 0x20000>; renesas,ipmmu-main = <&ipmmu_mm 14>; power-domains = <&sysc R8A779A0_PD_ALWAYS_ON>; @@ -2091,7 +2157,8 @@ }; ipmmu_vi1: iommu@eeec0000 { - compatible = "renesas,ipmmu-r8a779a0"; + compatible = "renesas,ipmmu-r8a779a0", + "renesas,rcar-gen4-ipmmu-vmsa"; reg = <0 0xeeec0000 0 0x20000>; renesas,ipmmu-main = <&ipmmu_mm 15>; power-domains = <&sysc R8A779A0_PD_ALWAYS_ON>; @@ -2099,7 +2166,8 @@ }; ipmmu_3dg: iommu@eee00000 { - compatible = "renesas,ipmmu-r8a779a0"; + compatible = "renesas,ipmmu-r8a779a0", + "renesas,rcar-gen4-ipmmu-vmsa"; reg = <0 0xeee00000 0 0x20000>; renesas,ipmmu-main = <&ipmmu_mm 6>; power-domains = <&sysc R8A779A0_PD_ALWAYS_ON>; @@ -2107,7 +2175,8 @@ }; ipmmu_vip0: iommu@eef00000 { - compatible = "renesas,ipmmu-r8a779a0"; + compatible = "renesas,ipmmu-r8a779a0", + "renesas,rcar-gen4-ipmmu-vmsa"; reg = <0 0xeef00000 0 0x20000>; renesas,ipmmu-main = <&ipmmu_mm 5>; power-domains = <&sysc R8A779A0_PD_ALWAYS_ON>; @@ -2115,7 +2184,8 @@ }; ipmmu_vip1: iommu@eef40000 { - compatible = "renesas,ipmmu-r8a779a0"; + compatible = "renesas,ipmmu-r8a779a0", + "renesas,rcar-gen4-ipmmu-vmsa"; reg = <0 0xeef40000 0 0x20000>; renesas,ipmmu-main = <&ipmmu_mm 11>; power-domains = <&sysc R8A779A0_PD_ALWAYS_ON>; @@ -2123,7 +2193,8 @@ }; ipmmu_mm: iommu@eefc0000 { - compatible = "renesas,ipmmu-r8a779a0"; + compatible = "renesas,ipmmu-r8a779a0", + "renesas,rcar-gen4-ipmmu-vmsa"; reg = <0 0xeefc0000 0 0x20000>; interrupts = <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>; diff --git a/arch/arm64/boot/dts/renesas/r8a779f0-spider-cpu.dtsi b/arch/arm64/boot/dts/renesas/r8a779f0-spider-cpu.dtsi index 6e07c54148e7..41aa8591b3b1 100644 --- a/arch/arm64/boot/dts/renesas/r8a779f0-spider-cpu.dtsi +++ b/arch/arm64/boot/dts/renesas/r8a779f0-spider-cpu.dtsi @@ -31,10 +31,30 @@ clock-frequency = <32768>; }; +&i2c4 { + pinctrl-0 = <&i2c4_pins>; + pinctrl-names = "default"; + + status = "okay"; + clock-frequency = <400000>; + + eeprom@50 { + compatible = "rohm,br24g01", "atmel,24c01"; + label = "cpu-board"; + reg = <0x50>; + pagesize = <8>; + }; +}; + &pfc { pinctrl-0 = <&scif_clk_pins>; pinctrl-names = "default"; + i2c4_pins: i2c4 { + groups = "i2c4"; + function = "i2c4"; + }; + scif3_pins: scif3 { groups = "scif3_data", "scif3_ctrl"; function = "scif3"; diff --git a/arch/arm64/boot/dts/renesas/r8a779f0-spider-ethernet.dtsi b/arch/arm64/boot/dts/renesas/r8a779f0-spider-ethernet.dtsi new file mode 100644 index 000000000000..15e8d1ebf575 --- /dev/null +++ b/arch/arm64/boot/dts/renesas/r8a779f0-spider-ethernet.dtsi @@ -0,0 +1,15 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Device Tree Source for the Spider Ethernet sub-board + * + * Copyright (C) 2021 Renesas Electronics Corp. + */ + +&i2c4 { + eeprom@52 { + compatible = "rohm,br24g01", "atmel,24c01"; + label = "ethernet-sub-board"; + reg = <0x52>; + pagesize = <8>; + }; +}; diff --git a/arch/arm64/boot/dts/renesas/r8a779f0-spider.dts b/arch/arm64/boot/dts/renesas/r8a779f0-spider.dts index f286254b41d8..2e3b719cc749 100644 --- a/arch/arm64/boot/dts/renesas/r8a779f0-spider.dts +++ b/arch/arm64/boot/dts/renesas/r8a779f0-spider.dts @@ -7,6 +7,7 @@ /dts-v1/; #include "r8a779f0-spider-cpu.dtsi" +#include "r8a779f0-spider-ethernet.dtsi" / { model = "Renesas Spider CPU and Breakout boards based on r8a779f0"; @@ -20,3 +21,12 @@ stdout-path = "serial0:115200n8"; }; }; + +&i2c4 { + eeprom@51 { + compatible = "rohm,br24g01", "atmel,24c01"; + label = "breakout-board"; + reg = <0x51>; + pagesize = <8>; + }; +}; diff --git a/arch/arm64/boot/dts/renesas/r8a779f0.dtsi b/arch/arm64/boot/dts/renesas/r8a779f0.dtsi index f4e549867371..df46fb87cffc 100644 --- a/arch/arm64/boot/dts/renesas/r8a779f0.dtsi +++ b/arch/arm64/boot/dts/renesas/r8a779f0.dtsi @@ -63,6 +63,7 @@ compatible = "renesas,r8a779f0-wdt", "renesas,rcar-gen4-wdt"; reg = <0 0xe6020000 0 0x0c>; + interrupts = <GIC_SPI 515 IRQ_TYPE_LEVEL_HIGH>; clocks = <&cpg CPG_MOD 907>; power-domains = <&sysc R8A779F0_PD_ALWAYS_ON>; resets = <&cpg 907>; @@ -75,6 +76,66 @@ <0 0xe6051000 0 0x16c>, <0 0xe6051800 0 0x16c>; }; + gpio0: gpio@e6050180 { + compatible = "renesas,gpio-r8a779f0", + "renesas,rcar-gen4-gpio"; + reg = <0 0xe6050180 0 0x54>; + interrupts = <GIC_SPI 822 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 915>; + power-domains = <&sysc R8A779F0_PD_ALWAYS_ON>; + resets = <&cpg 915>; + gpio-controller; + #gpio-cells = <2>; + gpio-ranges = <&pfc 0 0 21>; + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpio1: gpio@e6050980 { + compatible = "renesas,gpio-r8a779f0", + "renesas,rcar-gen4-gpio"; + reg = <0 0xe6050980 0 0x54>; + interrupts = <GIC_SPI 823 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 915>; + power-domains = <&sysc R8A779F0_PD_ALWAYS_ON>; + resets = <&cpg 915>; + gpio-controller; + #gpio-cells = <2>; + gpio-ranges = <&pfc 0 32 25>; + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpio2: gpio@e6051180 { + compatible = "renesas,gpio-r8a779f0", + "renesas,rcar-gen4-gpio"; + reg = <0 0xe6051180 0 0x54>; + interrupts = <GIC_SPI 824 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 915>; + power-domains = <&sysc R8A779F0_PD_ALWAYS_ON>; + resets = <&cpg 915>; + gpio-controller; + #gpio-cells = <2>; + gpio-ranges = <&pfc 0 64 17>; + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpio3: gpio@e6051980 { + compatible = "renesas,gpio-r8a779f0", + "renesas,rcar-gen4-gpio"; + reg = <0 0xe6051980 0 0x54>; + interrupts = <GIC_SPI 825 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 915>; + power-domains = <&sysc R8A779F0_PD_ALWAYS_ON>; + resets = <&cpg 915>; + gpio-controller; + #gpio-cells = <2>; + gpio-ranges = <&pfc 0 96 19>; + interrupt-controller; + #interrupt-cells = <2>; + }; + cpg: clock-controller@e6150000 { compatible = "renesas,r8a779f0-cpg-mssr"; reg = <0 0xe6150000 0 0x4000>; @@ -96,6 +157,108 @@ #power-domain-cells = <1>; }; + i2c0: i2c@e6500000 { + compatible = "renesas,i2c-r8a779f0", + "renesas,rcar-gen4-i2c"; + reg = <0 0xe6500000 0 0x40>; + interrupts = <GIC_SPI 238 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 518>; + power-domains = <&sysc R8A779F0_PD_ALWAYS_ON>; + resets = <&cpg 518>; + dmas = <&dmac0 0x91>, <&dmac0 0x90>, + <&dmac1 0x91>, <&dmac1 0x90>; + dma-names = "tx", "rx", "tx", "rx"; + i2c-scl-internal-delay-ns = <110>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + i2c1: i2c@e6508000 { + compatible = "renesas,i2c-r8a779f0", + "renesas,rcar-gen4-i2c"; + reg = <0 0xe6508000 0 0x40>; + interrupts = <GIC_SPI 239 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 519>; + power-domains = <&sysc R8A779F0_PD_ALWAYS_ON>; + resets = <&cpg 519>; + dmas = <&dmac0 0x93>, <&dmac0 0x92>, + <&dmac1 0x93>, <&dmac1 0x92>; + dma-names = "tx", "rx", "tx", "rx"; + i2c-scl-internal-delay-ns = <110>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + i2c2: i2c@e6510000 { + compatible = "renesas,i2c-r8a779f0", + "renesas,rcar-gen4-i2c"; + reg = <0 0xe6510000 0 0x40>; + interrupts = <0 240 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 520>; + power-domains = <&sysc R8A779F0_PD_ALWAYS_ON>; + resets = <&cpg 520>; + dmas = <&dmac0 0x95>, <&dmac0 0x94>, + <&dmac1 0x95>, <&dmac1 0x94>; + dma-names = "tx", "rx", "tx", "rx"; + i2c-scl-internal-delay-ns = <110>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + i2c3: i2c@e66d0000 { + compatible = "renesas,i2c-r8a779f0", + "renesas,rcar-gen4-i2c"; + reg = <0 0xe66d0000 0 0x40>; + interrupts = <GIC_SPI 241 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 521>; + power-domains = <&sysc R8A779F0_PD_ALWAYS_ON>; + resets = <&cpg 521>; + dmas = <&dmac0 0x97>, <&dmac0 0x96>, + <&dmac1 0x97>, <&dmac1 0x96>; + dma-names = "tx", "rx", "tx", "rx"; + i2c-scl-internal-delay-ns = <110>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + i2c4: i2c@e66d8000 { + compatible = "renesas,i2c-r8a779f0", + "renesas,rcar-gen4-i2c"; + reg = <0 0xe66d8000 0 0x40>; + interrupts = <GIC_SPI 242 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 522>; + power-domains = <&sysc R8A779F0_PD_ALWAYS_ON>; + resets = <&cpg 522>; + dmas = <&dmac0 0x99>, <&dmac0 0x98>, + <&dmac1 0x99>, <&dmac1 0x98>; + dma-names = "tx", "rx", "tx", "rx"; + i2c-scl-internal-delay-ns = <110>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + i2c5: i2c@e66e0000 { + compatible = "renesas,i2c-r8a779f0", + "renesas,rcar-gen4-i2c"; + reg = <0 0xe66e0000 0 0x40>; + interrupts = <GIC_SPI 243 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 523>; + power-domains = <&sysc R8A779F0_PD_ALWAYS_ON>; + resets = <&cpg 523>; + dmas = <&dmac0 0x9b>, <&dmac0 0x9a>, + <&dmac1 0x9b>, <&dmac1 0x9a>; + dma-names = "tx", "rx", "tx", "rx"; + i2c-scl-internal-delay-ns = <110>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + scif3: serial@e6c50000 { compatible = "renesas,scif-r8a779f0", "renesas,rcar-gen4-scif", "renesas,scif"; diff --git a/arch/arm64/boot/dts/renesas/r8a779g0-white-hawk-cpu.dtsi b/arch/arm64/boot/dts/renesas/r8a779g0-white-hawk-cpu.dtsi new file mode 100644 index 000000000000..ea4ae4b893ab --- /dev/null +++ b/arch/arm64/boot/dts/renesas/r8a779g0-white-hawk-cpu.dtsi @@ -0,0 +1,45 @@ +// SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +/* + * Device Tree Source for the White Hawk CPU board + * + * Copyright (C) 2022 Renesas Electronics Corp. + */ + +#include "r8a779g0.dtsi" + +/ { + model = "Renesas White Hawk CPU board"; + compatible = "renesas,white-hawk-cpu", "renesas,r8a779g0"; + + memory@48000000 { + device_type = "memory"; + /* first 128MB is reserved for secure area. */ + reg = <0x0 0x48000000 0x0 0x78000000>; + }; + + memory@480000000 { + device_type = "memory"; + reg = <0x4 0x80000000 0x0 0x80000000>; + }; + + memory@600000000 { + device_type = "memory"; + reg = <0x6 0x00000000 0x1 0x00000000>; + }; +}; + +&extal_clk { + clock-frequency = <16666666>; +}; + +&extalr_clk { + clock-frequency = <32768>; +}; + +&hscif0 { + status = "okay"; +}; + +&scif_clk { + clock-frequency = <24000000>; +}; diff --git a/arch/arm64/boot/dts/renesas/r8a779g0-white-hawk.dts b/arch/arm64/boot/dts/renesas/r8a779g0-white-hawk.dts new file mode 100644 index 000000000000..bc0ac109b17c --- /dev/null +++ b/arch/arm64/boot/dts/renesas/r8a779g0-white-hawk.dts @@ -0,0 +1,22 @@ +// SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +/* + * Device Tree Source for the White Hawk CPU and BreakOut boards + * + * Copyright (C) 2022 Renesas Electronics Corp. + */ + +/dts-v1/; +#include "r8a779g0-white-hawk-cpu.dtsi" + +/ { + model = "Renesas White Hawk CPU and Breakout boards based on r8a779g0"; + compatible = "renesas,white-hawk-breakout", "renesas,white-hawk-cpu", "renesas,r8a779g0"; + + aliases { + serial0 = &hscif0; + }; + + chosen { + stdout-path = "serial0:921600n8"; + }; +}; diff --git a/arch/arm64/boot/dts/renesas/r8a779g0.dtsi b/arch/arm64/boot/dts/renesas/r8a779g0.dtsi new file mode 100644 index 000000000000..7cbb0de060dd --- /dev/null +++ b/arch/arm64/boot/dts/renesas/r8a779g0.dtsi @@ -0,0 +1,122 @@ +// SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +/* + * Device Tree Source for the R-Car V4H (R8A779G0) SoC + * + * Copyright (C) 2022 Renesas Electronics Corp. + */ + +#include <dt-bindings/clock/r8a779g0-cpg-mssr.h> +#include <dt-bindings/interrupt-controller/arm-gic.h> +#include <dt-bindings/power/r8a779g0-sysc.h> + +/ { + compatible = "renesas,r8a779g0"; + #address-cells = <2>; + #size-cells = <2>; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + a76_0: cpu@0 { + compatible = "arm,cortex-a76"; + reg = <0>; + device_type = "cpu"; + power-domains = <&sysc R8A779G0_PD_A1E0D0C0>; + }; + }; + + extal_clk: extal { + compatible = "fixed-clock"; + #clock-cells = <0>; + /* This value must be overridden by the board */ + clock-frequency = <0>; + }; + + extalr_clk: extalr { + compatible = "fixed-clock"; + #clock-cells = <0>; + /* This value must be overridden by the board */ + clock-frequency = <0>; + }; + + pmu_a76 { + compatible = "arm,cortex-a76-pmu"; + interrupts-extended = <&gic GIC_PPI 7 IRQ_TYPE_LEVEL_LOW>; + }; + + /* External SCIF clock - to be overridden by boards that provide it */ + scif_clk: scif { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <0>; + }; + + soc: soc { + compatible = "simple-bus"; + interrupt-parent = <&gic>; + #address-cells = <2>; + #size-cells = <2>; + ranges; + + cpg: clock-controller@e6150000 { + compatible = "renesas,r8a779g0-cpg-mssr"; + reg = <0 0xe6150000 0 0x4000>; + clocks = <&extal_clk>, <&extalr_clk>; + clock-names = "extal", "extalr"; + #clock-cells = <2>; + #power-domain-cells = <0>; + #reset-cells = <1>; + }; + + rst: reset-controller@e6160000 { + compatible = "renesas,r8a779g0-rst"; + reg = <0 0xe6160000 0 0x4000>; + }; + + sysc: system-controller@e6180000 { + compatible = "renesas,r8a779g0-sysc"; + reg = <0 0xe6180000 0 0x4000>; + #power-domain-cells = <1>; + }; + + hscif0: serial@e6540000 { + compatible = "renesas,hscif-r8a779g0", + "renesas,rcar-gen4-hscif", + "renesas,hscif"; + reg = <0 0xe6540000 0 96>; + interrupts = <GIC_SPI 245 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 514>, + <&cpg CPG_CORE R8A779G0_CLK_S0D3_PER>, + <&scif_clk>; + clock-names = "fck", "brg_int", "scif_clk"; + power-domains = <&sysc R8A779G0_PD_ALWAYS_ON>; + resets = <&cpg 514>; + status = "disabled"; + }; + + gic: interrupt-controller@f1000000 { + compatible = "arm,gic-v3"; + #interrupt-cells = <3>; + #address-cells = <0>; + interrupt-controller; + reg = <0x0 0xf1000000 0 0x20000>, + <0x0 0xf1060000 0 0x110000>; + interrupts = <GIC_PPI 9 + (GIC_CPU_MASK_SIMPLE(1) | IRQ_TYPE_LEVEL_HIGH)>; + }; + + prr: chipid@fff00044 { + compatible = "renesas,prr"; + reg = <0 0xfff00044 0 4>; + }; + }; + + timer { + compatible = "arm,armv8-timer"; + interrupts-extended = <&gic GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(1) | IRQ_TYPE_LEVEL_LOW)>, + <&gic GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(1) | IRQ_TYPE_LEVEL_LOW)>, + <&gic GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(1) | IRQ_TYPE_LEVEL_LOW)>, + <&gic GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(1) | IRQ_TYPE_LEVEL_LOW)>; + }; +}; diff --git a/arch/arm64/boot/dts/renesas/r9a07g043.dtsi b/arch/arm64/boot/dts/renesas/r9a07g043.dtsi new file mode 100644 index 000000000000..b31fb713ae4d --- /dev/null +++ b/arch/arm64/boot/dts/renesas/r9a07g043.dtsi @@ -0,0 +1,885 @@ +// SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +/* + * Device Tree Source for the RZ/G2UL SoC + * + * Copyright (C) 2022 Renesas Electronics Corp. + */ + +#include <dt-bindings/interrupt-controller/arm-gic.h> +#include <dt-bindings/clock/r9a07g043-cpg.h> + +/ { + compatible = "renesas,r9a07g043"; + #address-cells = <2>; + #size-cells = <2>; + + audio_clk1: audio-clk1 { + compatible = "fixed-clock"; + #clock-cells = <0>; + /* This value must be overridden by boards that provide it */ + clock-frequency = <0>; + }; + + audio_clk2: audio-clk2 { + compatible = "fixed-clock"; + #clock-cells = <0>; + /* This value must be overridden by boards that provide it */ + clock-frequency = <0>; + }; + + /* External CAN clock - to be overridden by boards that provide it */ + can_clk: can-clk { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <0>; + }; + + /* clock can be either from exclk or crystal oscillator (XIN/XOUT) */ + extal_clk: extal-clk { + compatible = "fixed-clock"; + #clock-cells = <0>; + /* This value must be overridden by the board */ + clock-frequency = <0>; + }; + + cluster0_opp: opp-table-0 { + compatible = "operating-points-v2"; + opp-shared; + + opp-125000000 { + opp-hz = /bits/ 64 <125000000>; + opp-microvolt = <1100000>; + clock-latency-ns = <300000>; + }; + opp-250000000 { + opp-hz = /bits/ 64 <250000000>; + opp-microvolt = <1100000>; + clock-latency-ns = <300000>; + }; + opp-500000000 { + opp-hz = /bits/ 64 <500000000>; + opp-microvolt = <1100000>; + clock-latency-ns = <300000>; + }; + opp-1000000000 { + opp-hz = /bits/ 64 <1000000000>; + opp-microvolt = <1100000>; + clock-latency-ns = <300000>; + opp-suspend; + }; + }; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + cpu0: cpu@0 { + compatible = "arm,cortex-a55"; + reg = <0>; + device_type = "cpu"; + #cooling-cells = <2>; + next-level-cache = <&L3_CA55>; + enable-method = "psci"; + clocks = <&cpg CPG_CORE R9A07G043_CLK_I>; + operating-points-v2 = <&cluster0_opp>; + }; + + L3_CA55: cache-controller-0 { + compatible = "cache"; + cache-unified; + cache-size = <0x40000>; + }; + }; + + psci { + compatible = "arm,psci-1.0", "arm,psci-0.2"; + method = "smc"; + }; + + soc: soc { + compatible = "simple-bus"; + interrupt-parent = <&gic>; + #address-cells = <2>; + #size-cells = <2>; + ranges; + + ssi0: ssi@10049c00 { + compatible = "renesas,r9a07g043-ssi", + "renesas,rz-ssi"; + reg = <0 0x10049c00 0 0x400>; + interrupts = <GIC_SPI 326 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 327 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 328 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 329 IRQ_TYPE_EDGE_RISING>; + interrupt-names = "int_req", "dma_rx", "dma_tx", "dma_rt"; + clocks = <&cpg CPG_MOD R9A07G043_SSI0_PCLK2>, + <&cpg CPG_MOD R9A07G043_SSI0_PCLK_SFR>, + <&audio_clk1>, <&audio_clk2>; + clock-names = "ssi", "ssi_sfr", "audio_clk1", "audio_clk2"; + resets = <&cpg R9A07G043_SSI0_RST_M2_REG>; + dmas = <&dmac 0x2655>, <&dmac 0x2656>; + dma-names = "tx", "rx"; + power-domains = <&cpg>; + #sound-dai-cells = <0>; + status = "disabled"; + }; + + ssi1: ssi@1004a000 { + compatible = "renesas,r9a07g043-ssi", + "renesas,rz-ssi"; + reg = <0 0x1004a000 0 0x400>; + interrupts = <GIC_SPI 330 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 331 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 332 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 333 IRQ_TYPE_EDGE_RISING>; + interrupt-names = "int_req", "dma_rx", "dma_tx", "dma_rt"; + clocks = <&cpg CPG_MOD R9A07G043_SSI1_PCLK2>, + <&cpg CPG_MOD R9A07G043_SSI1_PCLK_SFR>, + <&audio_clk1>, <&audio_clk2>; + clock-names = "ssi", "ssi_sfr", "audio_clk1", "audio_clk2"; + resets = <&cpg R9A07G043_SSI1_RST_M2_REG>; + dmas = <&dmac 0x2659>, <&dmac 0x265a>; + dma-names = "tx", "rx"; + power-domains = <&cpg>; + #sound-dai-cells = <0>; + status = "disabled"; + }; + + ssi2: ssi@1004a400 { + compatible = "renesas,r9a07g043-ssi", + "renesas,rz-ssi"; + reg = <0 0x1004a400 0 0x400>; + interrupts = <GIC_SPI 334 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 335 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 336 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 337 IRQ_TYPE_EDGE_RISING>; + interrupt-names = "int_req", "dma_rx", "dma_tx", "dma_rt"; + clocks = <&cpg CPG_MOD R9A07G043_SSI2_PCLK2>, + <&cpg CPG_MOD R9A07G043_SSI2_PCLK_SFR>, + <&audio_clk1>, <&audio_clk2>; + clock-names = "ssi", "ssi_sfr", "audio_clk1", "audio_clk2"; + resets = <&cpg R9A07G043_SSI2_RST_M2_REG>; + dmas = <&dmac 0x265f>; + dma-names = "rt"; + power-domains = <&cpg>; + #sound-dai-cells = <0>; + status = "disabled"; + }; + + ssi3: ssi@1004a800 { + compatible = "renesas,r9a07g043-ssi", + "renesas,rz-ssi"; + reg = <0 0x1004a800 0 0x400>; + interrupts = <GIC_SPI 338 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 339 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 340 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 341 IRQ_TYPE_EDGE_RISING>; + interrupt-names = "int_req", "dma_rx", "dma_tx", "dma_rt"; + clocks = <&cpg CPG_MOD R9A07G043_SSI3_PCLK2>, + <&cpg CPG_MOD R9A07G043_SSI3_PCLK_SFR>, + <&audio_clk1>, <&audio_clk2>; + clock-names = "ssi", "ssi_sfr", "audio_clk1", "audio_clk2"; + resets = <&cpg R9A07G043_SSI3_RST_M2_REG>; + dmas = <&dmac 0x2661>, <&dmac 0x2662>; + dma-names = "tx", "rx"; + power-domains = <&cpg>; + #sound-dai-cells = <0>; + status = "disabled"; + }; + + spi0: spi@1004ac00 { + compatible = "renesas,r9a07g043-rspi", "renesas,rspi-rz"; + reg = <0 0x1004ac00 0 0x400>; + interrupts = <GIC_SPI 415 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 413 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 414 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "error", "rx", "tx"; + clocks = <&cpg CPG_MOD R9A07G043_RSPI0_CLKB>; + resets = <&cpg R9A07G043_RSPI0_RST>; + power-domains = <&cpg>; + num-cs = <1>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + spi1: spi@1004b000 { + compatible = "renesas,r9a07g043-rspi", "renesas,rspi-rz"; + reg = <0 0x1004b000 0 0x400>; + interrupts = <GIC_SPI 418 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 416 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 417 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "error", "rx", "tx"; + clocks = <&cpg CPG_MOD R9A07G043_RSPI1_CLKB>; + resets = <&cpg R9A07G043_RSPI1_RST>; + power-domains = <&cpg>; + num-cs = <1>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + spi2: spi@1004b400 { + compatible = "renesas,r9a07g043-rspi", "renesas,rspi-rz"; + reg = <0 0x1004b400 0 0x400>; + interrupts = <GIC_SPI 421 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 419 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 420 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "error", "rx", "tx"; + clocks = <&cpg CPG_MOD R9A07G043_RSPI2_CLKB>; + resets = <&cpg R9A07G043_RSPI2_RST>; + power-domains = <&cpg>; + num-cs = <1>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + scif0: serial@1004b800 { + compatible = "renesas,scif-r9a07g043", + "renesas,scif-r9a07g044"; + reg = <0 0x1004b800 0 0x400>; + interrupts = <GIC_SPI 380 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 382 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 383 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 381 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 384 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 384 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "eri", "rxi", "txi", + "bri", "dri", "tei"; + clocks = <&cpg CPG_MOD R9A07G043_SCIF0_CLK_PCK>; + clock-names = "fck"; + power-domains = <&cpg>; + resets = <&cpg R9A07G043_SCIF0_RST_SYSTEM_N>; + status = "disabled"; + }; + + scif1: serial@1004bc00 { + compatible = "renesas,scif-r9a07g043", + "renesas,scif-r9a07g044"; + reg = <0 0x1004bc00 0 0x400>; + interrupts = <GIC_SPI 385 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 387 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 388 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 386 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 389 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 389 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "eri", "rxi", "txi", + "bri", "dri", "tei"; + clocks = <&cpg CPG_MOD R9A07G043_SCIF1_CLK_PCK>; + clock-names = "fck"; + power-domains = <&cpg>; + resets = <&cpg R9A07G043_SCIF1_RST_SYSTEM_N>; + status = "disabled"; + }; + + scif2: serial@1004c000 { + compatible = "renesas,scif-r9a07g043", + "renesas,scif-r9a07g044"; + reg = <0 0x1004c000 0 0x400>; + interrupts = <GIC_SPI 390 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 392 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 393 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 391 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 394 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 394 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "eri", "rxi", "txi", + "bri", "dri", "tei"; + clocks = <&cpg CPG_MOD R9A07G043_SCIF2_CLK_PCK>; + clock-names = "fck"; + power-domains = <&cpg>; + resets = <&cpg R9A07G043_SCIF2_RST_SYSTEM_N>; + status = "disabled"; + }; + + scif3: serial@1004c400 { + compatible = "renesas,scif-r9a07g043", + "renesas,scif-r9a07g044"; + reg = <0 0x1004c400 0 0x400>; + interrupts = <GIC_SPI 395 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 397 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 398 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 396 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 399 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 399 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "eri", "rxi", "txi", + "bri", "dri", "tei"; + clocks = <&cpg CPG_MOD R9A07G043_SCIF3_CLK_PCK>; + clock-names = "fck"; + power-domains = <&cpg>; + resets = <&cpg R9A07G043_SCIF3_RST_SYSTEM_N>; + status = "disabled"; + }; + + scif4: serial@1004c800 { + compatible = "renesas,scif-r9a07g043", + "renesas,scif-r9a07g044"; + reg = <0 0x1004c800 0 0x400>; + interrupts = <GIC_SPI 400 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 402 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 403 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 401 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 404 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 404 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "eri", "rxi", "txi", + "bri", "dri", "tei"; + clocks = <&cpg CPG_MOD R9A07G043_SCIF4_CLK_PCK>; + clock-names = "fck"; + power-domains = <&cpg>; + resets = <&cpg R9A07G043_SCIF4_RST_SYSTEM_N>; + status = "disabled"; + }; + + sci0: serial@1004d000 { + compatible = "renesas,r9a07g043-sci", "renesas,sci"; + reg = <0 0x1004d000 0 0x400>; + interrupts = <GIC_SPI 405 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 406 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 407 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 408 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "eri", "rxi", "txi", "tei"; + clocks = <&cpg CPG_MOD R9A07G043_SCI0_CLKP>; + clock-names = "fck"; + power-domains = <&cpg>; + resets = <&cpg R9A07G043_SCI0_RST>; + status = "disabled"; + }; + + sci1: serial@1004d400 { + compatible = "renesas,r9a07g043-sci", "renesas,sci"; + reg = <0 0x1004d400 0 0x400>; + interrupts = <GIC_SPI 409 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 410 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 411 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 412 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "eri", "rxi", "txi", "tei"; + clocks = <&cpg CPG_MOD R9A07G043_SCI1_CLKP>; + clock-names = "fck"; + power-domains = <&cpg>; + resets = <&cpg R9A07G043_SCI1_RST>; + status = "disabled"; + }; + + canfd: can@10050000 { + compatible = "renesas,r9a07g043-canfd", "renesas,rzg2l-canfd"; + reg = <0 0x10050000 0 0x8000>; + interrupts = <GIC_SPI 426 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 427 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 422 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 424 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 428 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 423 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 425 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 429 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "g_err", "g_recc", + "ch0_err", "ch0_rec", "ch0_trx", + "ch1_err", "ch1_rec", "ch1_trx"; + clocks = <&cpg CPG_MOD R9A07G043_CANFD_PCLK>, + <&cpg CPG_CORE R9A07G043_CLK_P0_DIV2>, + <&can_clk>; + clock-names = "fck", "canfd", "can_clk"; + assigned-clocks = <&cpg CPG_CORE R9A07G043_CLK_P0_DIV2>; + assigned-clock-rates = <50000000>; + resets = <&cpg R9A07G043_CANFD_RSTP_N>, + <&cpg R9A07G043_CANFD_RSTC_N>; + reset-names = "rstp_n", "rstc_n"; + power-domains = <&cpg>; + status = "disabled"; + + channel0 { + status = "disabled"; + }; + channel1 { + status = "disabled"; + }; + }; + + i2c0: i2c@10058000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "renesas,riic-r9a07g043", "renesas,riic-rz"; + reg = <0 0x10058000 0 0x400>; + interrupts = <GIC_SPI 350 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 348 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 349 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 352 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 353 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 351 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 354 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 355 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "tei", "ri", "ti", "spi", "sti", + "naki", "ali", "tmoi"; + clocks = <&cpg CPG_MOD R9A07G043_I2C0_PCLK>; + clock-frequency = <100000>; + resets = <&cpg R9A07G043_I2C0_MRST>; + power-domains = <&cpg>; + status = "disabled"; + }; + + i2c1: i2c@10058400 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "renesas,riic-r9a07g043", "renesas,riic-rz"; + reg = <0 0x10058400 0 0x400>; + interrupts = <GIC_SPI 358 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 356 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 357 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 360 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 361 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 359 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 362 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 363 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "tei", "ri", "ti", "spi", "sti", + "naki", "ali", "tmoi"; + clocks = <&cpg CPG_MOD R9A07G043_I2C1_PCLK>; + clock-frequency = <100000>; + resets = <&cpg R9A07G043_I2C1_MRST>; + power-domains = <&cpg>; + status = "disabled"; + }; + + i2c2: i2c@10058800 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "renesas,riic-r9a07g043", "renesas,riic-rz"; + reg = <0 0x10058800 0 0x400>; + interrupts = <GIC_SPI 366 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 364 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 365 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 368 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 369 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 367 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 370 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 371 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "tei", "ri", "ti", "spi", "sti", + "naki", "ali", "tmoi"; + clocks = <&cpg CPG_MOD R9A07G043_I2C2_PCLK>; + clock-frequency = <100000>; + resets = <&cpg R9A07G043_I2C2_MRST>; + power-domains = <&cpg>; + status = "disabled"; + }; + + i2c3: i2c@10058c00 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "renesas,riic-r9a07g043", "renesas,riic-rz"; + reg = <0 0x10058c00 0 0x400>; + interrupts = <GIC_SPI 374 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 372 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 373 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 376 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 377 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 375 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 378 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 379 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "tei", "ri", "ti", "spi", "sti", + "naki", "ali", "tmoi"; + clocks = <&cpg CPG_MOD R9A07G043_I2C3_PCLK>; + clock-frequency = <100000>; + resets = <&cpg R9A07G043_I2C3_MRST>; + power-domains = <&cpg>; + status = "disabled"; + }; + + adc: adc@10059000 { + reg = <0 0x10059000 0 0x400>; + /* place holder */ + }; + + tsu: thermal@10059400 { + compatible = "renesas,r9a07g043-tsu", + "renesas,rzg2l-tsu"; + reg = <0 0x10059400 0 0x400>; + clocks = <&cpg CPG_MOD R9A07G043_TSU_PCLK>; + resets = <&cpg R9A07G043_TSU_PRESETN>; + power-domains = <&cpg>; + #thermal-sensor-cells = <1>; + }; + + sbc: spi@10060000 { + compatible = "renesas,r9a07g043-rpc-if", + "renesas,rzg2l-rpc-if"; + reg = <0 0x10060000 0 0x10000>, + <0 0x20000000 0 0x10000000>, + <0 0x10070000 0 0x10000>; + reg-names = "regs", "dirmap", "wbuf"; + clocks = <&cpg CPG_MOD R9A07G043_SPI_CLK2>, + <&cpg CPG_MOD R9A07G043_SPI_CLK>; + resets = <&cpg R9A07G043_SPI_RST>; + power-domains = <&cpg>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + cpg: clock-controller@11010000 { + compatible = "renesas,r9a07g043-cpg"; + reg = <0 0x11010000 0 0x10000>; + clocks = <&extal_clk>; + clock-names = "extal"; + #clock-cells = <2>; + #reset-cells = <1>; + #power-domain-cells = <0>; + }; + + sysc: system-controller@11020000 { + compatible = "renesas,r9a07g043-sysc"; + reg = <0 0x11020000 0 0x10000>; + interrupts = <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "lpm_int", "ca55stbydone_int", + "cm33stbyr_int", "ca55_deny"; + status = "disabled"; + }; + + pinctrl: pinctrl@11030000 { + compatible = "renesas,r9a07g043-pinctrl"; + reg = <0 0x11030000 0 0x10000>; + gpio-controller; + #gpio-cells = <2>; + gpio-ranges = <&pinctrl 0 0 152>; + clocks = <&cpg CPG_MOD R9A07G043_GPIO_HCLK>; + power-domains = <&cpg>; + resets = <&cpg R9A07G043_GPIO_RSTN>, + <&cpg R9A07G043_GPIO_PORT_RESETN>, + <&cpg R9A07G043_GPIO_SPARE_RESETN>; + }; + + dmac: dma-controller@11820000 { + compatible = "renesas,r9a07g043-dmac", + "renesas,rz-dmac"; + reg = <0 0x11820000 0 0x10000>, + <0 0x11830000 0 0x10000>; + interrupts = <GIC_SPI 141 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 125 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 126 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 127 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 128 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 129 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 130 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 131 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 132 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 133 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 134 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 135 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 136 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 137 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 138 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 139 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 140 IRQ_TYPE_EDGE_RISING>; + interrupt-names = "error", + "ch0", "ch1", "ch2", "ch3", + "ch4", "ch5", "ch6", "ch7", + "ch8", "ch9", "ch10", "ch11", + "ch12", "ch13", "ch14", "ch15"; + clocks = <&cpg CPG_MOD R9A07G043_DMAC_ACLK>, + <&cpg CPG_MOD R9A07G043_DMAC_PCLK>; + power-domains = <&cpg>; + resets = <&cpg R9A07G043_DMAC_ARESETN>, + <&cpg R9A07G043_DMAC_RST_ASYNC>; + #dma-cells = <1>; + dma-channels = <16>; + }; + + gic: interrupt-controller@11900000 { + compatible = "arm,gic-v3"; + #interrupt-cells = <3>; + #address-cells = <0>; + interrupt-controller; + reg = <0x0 0x11900000 0 0x40000>, + <0x0 0x11940000 0 0x60000>; + interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_LOW>; + }; + + sdhi0: mmc@11c00000 { + compatible = "renesas,sdhi-r9a07g043", + "renesas,rcar-gen3-sdhi"; + reg = <0x0 0x11c00000 0 0x10000>; + interrupts = <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD R9A07G043_SDHI0_IMCLK>, + <&cpg CPG_MOD R9A07G043_SDHI0_CLK_HS>, + <&cpg CPG_MOD R9A07G043_SDHI0_IMCLK2>, + <&cpg CPG_MOD R9A07G043_SDHI0_ACLK>; + clock-names = "core", "clkh", "cd", "aclk"; + resets = <&cpg R9A07G043_SDHI0_IXRST>; + power-domains = <&cpg>; + status = "disabled"; + }; + + sdhi1: mmc@11c10000 { + compatible = "renesas,sdhi-r9a07g043", + "renesas,rcar-gen3-sdhi"; + reg = <0x0 0x11c10000 0 0x10000>; + interrupts = <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD R9A07G043_SDHI1_IMCLK>, + <&cpg CPG_MOD R9A07G043_SDHI1_CLK_HS>, + <&cpg CPG_MOD R9A07G043_SDHI1_IMCLK2>, + <&cpg CPG_MOD R9A07G043_SDHI1_ACLK>; + clock-names = "core", "clkh", "cd", "aclk"; + resets = <&cpg R9A07G043_SDHI1_IXRST>; + power-domains = <&cpg>; + status = "disabled"; + }; + + eth0: ethernet@11c20000 { + compatible = "renesas,r9a07g043-gbeth", + "renesas,rzg2l-gbeth"; + reg = <0 0x11c20000 0 0x10000>; + interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "mux", "fil", "arp_ns"; + phy-mode = "rgmii"; + clocks = <&cpg CPG_MOD R9A07G043_ETH0_CLK_AXI>, + <&cpg CPG_MOD R9A07G043_ETH0_CLK_CHI>, + <&cpg CPG_CORE R9A07G043_CLK_HP>; + clock-names = "axi", "chi", "refclk"; + resets = <&cpg R9A07G043_ETH0_RST_HW_N>; + power-domains = <&cpg>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + eth1: ethernet@11c30000 { + compatible = "renesas,r9a07g043-gbeth", + "renesas,rzg2l-gbeth"; + reg = <0 0x11c30000 0 0x10000>; + interrupts = <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 88 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "mux", "fil", "arp_ns"; + phy-mode = "rgmii"; + clocks = <&cpg CPG_MOD R9A07G043_ETH1_CLK_AXI>, + <&cpg CPG_MOD R9A07G043_ETH1_CLK_CHI>, + <&cpg CPG_CORE R9A07G043_CLK_HP>; + clock-names = "axi", "chi", "refclk"; + resets = <&cpg R9A07G043_ETH1_RST_HW_N>; + power-domains = <&cpg>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + phyrst: usbphy-ctrl@11c40000 { + compatible = "renesas,r9a07g043-usbphy-ctrl", + "renesas,rzg2l-usbphy-ctrl"; + reg = <0 0x11c40000 0 0x10000>; + clocks = <&cpg CPG_MOD R9A07G043_USB_PCLK>; + resets = <&cpg R9A07G043_USB_PRESETN>; + power-domains = <&cpg>; + #reset-cells = <1>; + status = "disabled"; + }; + + ohci0: usb@11c50000 { + compatible = "generic-ohci"; + reg = <0 0x11c50000 0 0x100>; + interrupts = <GIC_SPI 91 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD R9A07G043_USB_PCLK>, + <&cpg CPG_MOD R9A07G043_USB_U2H0_HCLK>; + resets = <&phyrst 0>, + <&cpg R9A07G043_USB_U2H0_HRESETN>; + phys = <&usb2_phy0 1>; + phy-names = "usb"; + power-domains = <&cpg>; + status = "disabled"; + }; + + ohci1: usb@11c70000 { + compatible = "generic-ohci"; + reg = <0 0x11c70000 0 0x100>; + interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD R9A07G043_USB_PCLK>, + <&cpg CPG_MOD R9A07G043_USB_U2H1_HCLK>; + resets = <&phyrst 1>, + <&cpg R9A07G043_USB_U2H1_HRESETN>; + phys = <&usb2_phy1 1>; + phy-names = "usb"; + power-domains = <&cpg>; + status = "disabled"; + }; + + ehci0: usb@11c50100 { + compatible = "generic-ehci"; + reg = <0 0x11c50100 0 0x100>; + interrupts = <GIC_SPI 92 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD R9A07G043_USB_PCLK>, + <&cpg CPG_MOD R9A07G043_USB_U2H0_HCLK>; + resets = <&phyrst 0>, + <&cpg R9A07G043_USB_U2H0_HRESETN>; + phys = <&usb2_phy0 2>; + phy-names = "usb"; + companion = <&ohci0>; + power-domains = <&cpg>; + status = "disabled"; + }; + + ehci1: usb@11c70100 { + compatible = "generic-ehci"; + reg = <0 0x11c70100 0 0x100>; + interrupts = <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD R9A07G043_USB_PCLK>, + <&cpg CPG_MOD R9A07G043_USB_U2H1_HCLK>; + resets = <&phyrst 1>, + <&cpg R9A07G043_USB_U2H1_HRESETN>; + phys = <&usb2_phy1 2>; + phy-names = "usb"; + companion = <&ohci1>; + power-domains = <&cpg>; + status = "disabled"; + }; + + usb2_phy0: usb-phy@11c50200 { + compatible = "renesas,usb2-phy-r9a07g043", + "renesas,rzg2l-usb2-phy"; + reg = <0 0x11c50200 0 0x700>; + interrupts = <GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD R9A07G043_USB_PCLK>, + <&cpg CPG_MOD R9A07G043_USB_U2H0_HCLK>; + resets = <&phyrst 0>; + #phy-cells = <1>; + power-domains = <&cpg>; + status = "disabled"; + }; + + usb2_phy1: usb-phy@11c70200 { + compatible = "renesas,usb2-phy-r9a07g043", + "renesas,rzg2l-usb2-phy"; + reg = <0 0x11c70200 0 0x700>; + interrupts = <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD R9A07G043_USB_PCLK>, + <&cpg CPG_MOD R9A07G043_USB_U2H1_HCLK>; + resets = <&phyrst 1>; + #phy-cells = <1>; + power-domains = <&cpg>; + status = "disabled"; + }; + + hsusb: usb@11c60000 { + compatible = "renesas,usbhs-r9a07g043", + "renesas,rza2-usbhs"; + reg = <0 0x11c60000 0 0x10000>; + interrupts = <GIC_SPI 100 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD R9A07G043_USB_PCLK>, + <&cpg CPG_MOD R9A07G043_USB_U2P_EXR_CPUCLK>; + resets = <&phyrst 0>, + <&cpg R9A07G043_USB_U2P_EXL_SYSRST>; + renesas,buswait = <7>; + phys = <&usb2_phy0 3>; + phy-names = "usb"; + power-domains = <&cpg>; + status = "disabled"; + }; + + wdt0: watchdog@12800800 { + compatible = "renesas,r9a07g043-wdt", + "renesas,rzg2l-wdt"; + reg = <0 0x12800800 0 0x400>; + clocks = <&cpg CPG_MOD R9A07G043_WDT0_PCLK>, + <&cpg CPG_MOD R9A07G043_WDT0_CLK>; + clock-names = "pclk", "oscclk"; + interrupts = <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 50 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "wdt", "perrout"; + resets = <&cpg R9A07G043_WDT0_PRESETN>; + power-domains = <&cpg>; + status = "disabled"; + }; + + wdt2: watchdog@12800400 { + compatible = "renesas,r9a07g043-wdt", + "renesas,rzg2l-wdt"; + reg = <0 0x12800400 0 0x400>; + clocks = <&cpg CPG_MOD R9A07G043_WDT2_PCLK>, + <&cpg CPG_MOD R9A07G043_WDT2_CLK>; + clock-names = "pclk", "oscclk"; + interrupts = <GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "wdt", "perrout"; + resets = <&cpg R9A07G043_WDT2_PRESETN>; + power-domains = <&cpg>; + status = "disabled"; + }; + + ostm0: timer@12801000 { + compatible = "renesas,r9a07g043-ostm", + "renesas,ostm"; + reg = <0x0 0x12801000 0x0 0x400>; + interrupts = <GIC_SPI 46 IRQ_TYPE_EDGE_RISING>; + clocks = <&cpg CPG_MOD R9A07G043_OSTM0_PCLK>; + resets = <&cpg R9A07G043_OSTM0_PRESETZ>; + power-domains = <&cpg>; + status = "disabled"; + }; + + ostm1: timer@12801400 { + compatible = "renesas,r9a07g043-ostm", + "renesas,ostm"; + reg = <0x0 0x12801400 0x0 0x400>; + interrupts = <GIC_SPI 47 IRQ_TYPE_EDGE_RISING>; + clocks = <&cpg CPG_MOD R9A07G043_OSTM1_PCLK>; + resets = <&cpg R9A07G043_OSTM1_PRESETZ>; + power-domains = <&cpg>; + status = "disabled"; + }; + + ostm2: timer@12801800 { + compatible = "renesas,r9a07g043-ostm", + "renesas,ostm"; + reg = <0x0 0x12801800 0x0 0x400>; + interrupts = <GIC_SPI 48 IRQ_TYPE_EDGE_RISING>; + clocks = <&cpg CPG_MOD R9A07G043_OSTM2_PCLK>; + resets = <&cpg R9A07G043_OSTM2_PRESETZ>; + power-domains = <&cpg>; + status = "disabled"; + }; + }; + + thermal-zones { + cpu-thermal { + polling-delay-passive = <250>; + polling-delay = <1000>; + thermal-sensors = <&tsu 0>; + sustainable-power = <717>; + + cooling-maps { + map0 { + trip = <&target>; + cooling-device = <&cpu0 0 2>; + contribution = <1024>; + }; + }; + + trips { + sensor_crit: sensor-crit { + temperature = <125000>; + hysteresis = <1000>; + type = "critical"; + }; + + target: trip-point { + temperature = <100000>; + hysteresis = <1000>; + type = "passive"; + }; + }; + }; + }; + + timer { + compatible = "arm,armv8-timer"; + interrupts-extended = <&gic GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(1) | IRQ_TYPE_LEVEL_LOW)>, + <&gic GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(1) | IRQ_TYPE_LEVEL_LOW)>, + <&gic GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(1) | IRQ_TYPE_LEVEL_LOW)>, + <&gic GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(1) | IRQ_TYPE_LEVEL_LOW)>; + }; +}; diff --git a/arch/arm64/boot/dts/renesas/r9a07g043u11-smarc.dts b/arch/arm64/boot/dts/renesas/r9a07g043u11-smarc.dts new file mode 100644 index 000000000000..2d740bd420ca --- /dev/null +++ b/arch/arm64/boot/dts/renesas/r9a07g043u11-smarc.dts @@ -0,0 +1,21 @@ +// SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +/* + * Device Tree Source for the RZ/G2UL Type-1 SMARC EVK board + * + * Copyright (C) 2022 Renesas Electronics Corp. + */ + +/dts-v1/; +#include "r9a07g043.dtsi" +#include "rzg2ul-smarc.dtsi" + +/ { + model = "Renesas SMARC EVK based on r9a07g043u11"; + compatible = "renesas,smarc-evk", "renesas,r9a07g043u11", "renesas,r9a07g043"; +}; + +&spi1 { + /delete-property/ pinctrl-0; + /delete-property/ pinctrl-names; + status = "disabled"; +}; diff --git a/arch/arm64/boot/dts/renesas/r9a07g044.dtsi b/arch/arm64/boot/dts/renesas/r9a07g044.dtsi index 19287cccb1f0..3652e511160f 100644 --- a/arch/arm64/boot/dts/renesas/r9a07g044.dtsi +++ b/arch/arm64/boot/dts/renesas/r9a07g044.dtsi @@ -13,14 +13,14 @@ #address-cells = <2>; #size-cells = <2>; - audio_clk1: audio_clk1 { + audio_clk1: audio1-clk { compatible = "fixed-clock"; #clock-cells = <0>; /* This value must be overridden by boards that provide it */ clock-frequency = <0>; }; - audio_clk2: audio_clk2 { + audio_clk2: audio2-clk { compatible = "fixed-clock"; #clock-cells = <0>; /* This value must be overridden by boards that provide it */ @@ -28,14 +28,14 @@ }; /* External CAN clock - to be overridden by boards that provide it */ - can_clk: can { + can_clk: can-clk { compatible = "fixed-clock"; #clock-cells = <0>; clock-frequency = <0>; }; /* clock can be either from exclk or crystal oscillator (XIN/XOUT) */ - extal_clk: extal { + extal_clk: extal-clk { compatible = "fixed-clock"; #clock-cells = <0>; /* This value must be overridden by the board */ diff --git a/arch/arm64/boot/dts/renesas/r9a07g044c2-smarc.dts b/arch/arm64/boot/dts/renesas/r9a07g044c2-smarc.dts index 5a5cea82a5d9..fc34058002e2 100644 --- a/arch/arm64/boot/dts/renesas/r9a07g044c2-smarc.dts +++ b/arch/arm64/boot/dts/renesas/r9a07g044c2-smarc.dts @@ -13,79 +13,3 @@ model = "Renesas SMARC EVK based on r9a07g044c2"; compatible = "renesas,smarc-evk", "renesas,r9a07g044c2", "renesas,r9a07g044"; }; - -&ehci0 { - /delete-property/ pinctrl-0; - /delete-property/ pinctrl-names; - status = "disabled"; -}; - -&ehci1 { - /delete-property/ pinctrl-0; - /delete-property/ pinctrl-names; - status = "disabled"; -}; - -&hsusb { - /delete-property/ pinctrl-0; - /delete-property/ pinctrl-names; - status = "disabled"; -}; - -&i2c0 { - /delete-property/ pinctrl-0; - /delete-property/ pinctrl-names; - status = "disabled"; -}; - -&i2c1 { - /delete-property/ pinctrl-0; - /delete-property/ pinctrl-names; - status = "disabled"; -}; - -&i2c3 { - /delete-property/ pinctrl-0; - /delete-property/ pinctrl-names; - status = "disabled"; -}; - -&ohci0 { - /delete-property/ pinctrl-0; - /delete-property/ pinctrl-names; - status = "disabled"; -}; - -&ohci1 { - /delete-property/ pinctrl-0; - /delete-property/ pinctrl-names; - status = "disabled"; -}; - -&phyrst { - status = "disabled"; -}; - -&spi1 { - /delete-property/ pinctrl-0; - /delete-property/ pinctrl-names; - status = "disabled"; -}; - -&ssi0 { - /delete-property/ pinctrl-0; - /delete-property/ pinctrl-names; - status = "disabled"; -}; - -&usb2_phy0 { - /delete-property/ pinctrl-0; - /delete-property/ pinctrl-names; - status = "disabled"; -}; - -&usb2_phy1 { - /delete-property/ pinctrl-0; - /delete-property/ pinctrl-names; - status = "disabled"; -}; diff --git a/arch/arm64/boot/dts/renesas/r9a07g054.dtsi b/arch/arm64/boot/dts/renesas/r9a07g054.dtsi index 5d39e765c291..4d6b9d7684c9 100644 --- a/arch/arm64/boot/dts/renesas/r9a07g054.dtsi +++ b/arch/arm64/boot/dts/renesas/r9a07g054.dtsi @@ -13,14 +13,14 @@ #address-cells = <2>; #size-cells = <2>; - audio_clk1: audio_clk1 { + audio_clk1: audio1-clk { compatible = "fixed-clock"; #clock-cells = <0>; /* This value must be overridden by boards that provide it */ clock-frequency = <0>; }; - audio_clk2: audio_clk2 { + audio_clk2: audio2-clk { compatible = "fixed-clock"; #clock-cells = <0>; /* This value must be overridden by boards that provide it */ @@ -28,20 +28,47 @@ }; /* External CAN clock - to be overridden by boards that provide it */ - can_clk: can { + can_clk: can-clk { compatible = "fixed-clock"; #clock-cells = <0>; clock-frequency = <0>; }; /* clock can be either from exclk or crystal oscillator (XIN/XOUT) */ - extal_clk: extal { + extal_clk: extal-clk { compatible = "fixed-clock"; #clock-cells = <0>; /* This value must be overridden by the board */ clock-frequency = <0>; }; + cluster0_opp: opp-table-0 { + compatible = "operating-points-v2"; + opp-shared; + + opp-150000000 { + opp-hz = /bits/ 64 <150000000>; + opp-microvolt = <1100000>; + clock-latency-ns = <300000>; + }; + opp-300000000 { + opp-hz = /bits/ 64 <300000000>; + opp-microvolt = <1100000>; + clock-latency-ns = <300000>; + }; + opp-600000000 { + opp-hz = /bits/ 64 <600000000>; + opp-microvolt = <1100000>; + clock-latency-ns = <300000>; + }; + opp-1200000000 { + opp-hz = /bits/ 64 <1200000000>; + opp-microvolt = <1100000>; + clock-latency-ns = <300000>; + opp-suspend; + }; + }; + cpus { #address-cells = <1>; #size-cells = <0>; @@ -65,6 +92,7 @@ next-level-cache = <&L3_CA55>; enable-method = "psci"; clocks = <&cpg CPG_CORE R9A07G054_CLK_I>; + operating-points-v2 = <&cluster0_opp>; }; cpu1: cpu@100 { @@ -74,6 +102,7 @@ next-level-cache = <&L3_CA55>; enable-method = "psci"; clocks = <&cpg CPG_CORE R9A07G054_CLK_I>; + operating-points-v2 = <&cluster0_opp>; }; L3_CA55: cache-controller-0 { @@ -83,6 +112,50 @@ }; }; + gpu_opp_table: opp-table-1 { + compatible = "operating-points-v2"; + + opp-500000000 { + opp-hz = /bits/ 64 <500000000>; + opp-microvolt = <1100000>; + }; + + opp-400000000 { + opp-hz = /bits/ 64 <400000000>; + opp-microvolt = <1100000>; + }; + + opp-250000000 { + opp-hz = /bits/ 64 <250000000>; + opp-microvolt = <1100000>; + }; + + opp-200000000 { + opp-hz = /bits/ 64 <200000000>; + opp-microvolt = <1100000>; + }; + + opp-125000000 { + opp-hz = /bits/ 64 <125000000>; + opp-microvolt = <1100000>; + }; + + opp-100000000 { + opp-hz = /bits/ 64 <100000000>; + opp-microvolt = <1100000>; + }; + + opp-62500000 { + opp-hz = /bits/ 64 <62500000>; + opp-microvolt = <1100000>; + }; + + opp-50000000 { + opp-hz = /bits/ 64 <50000000>; + opp-microvolt = <1100000>; + }; + }; + psci { compatible = "arm,psci-1.0", "arm,psci-0.2"; method = "smc"; @@ -96,16 +169,135 @@ ranges; ssi0: ssi@10049c00 { + compatible = "renesas,r9a07g054-ssi", + "renesas,rz-ssi"; reg = <0 0x10049c00 0 0x400>; + interrupts = <GIC_SPI 326 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 327 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 328 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 329 IRQ_TYPE_EDGE_RISING>; + interrupt-names = "int_req", "dma_rx", "dma_tx", "dma_rt"; + clocks = <&cpg CPG_MOD R9A07G054_SSI0_PCLK2>, + <&cpg CPG_MOD R9A07G054_SSI0_PCLK_SFR>, + <&audio_clk1>, <&audio_clk2>; + clock-names = "ssi", "ssi_sfr", "audio_clk1", "audio_clk2"; + resets = <&cpg R9A07G054_SSI0_RST_M2_REG>; + dmas = <&dmac 0x2655>, <&dmac 0x2656>; + dma-names = "tx", "rx"; + power-domains = <&cpg>; #sound-dai-cells = <0>; - /* place holder */ + status = "disabled"; + }; + + ssi1: ssi@1004a000 { + compatible = "renesas,r9a07g054-ssi", + "renesas,rz-ssi"; + reg = <0 0x1004a000 0 0x400>; + interrupts = <GIC_SPI 330 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 331 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 332 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 333 IRQ_TYPE_EDGE_RISING>; + interrupt-names = "int_req", "dma_rx", "dma_tx", "dma_rt"; + clocks = <&cpg CPG_MOD R9A07G054_SSI1_PCLK2>, + <&cpg CPG_MOD R9A07G054_SSI1_PCLK_SFR>, + <&audio_clk1>, <&audio_clk2>; + clock-names = "ssi", "ssi_sfr", "audio_clk1", "audio_clk2"; + resets = <&cpg R9A07G054_SSI1_RST_M2_REG>; + dmas = <&dmac 0x2659>, <&dmac 0x265a>; + dma-names = "tx", "rx"; + power-domains = <&cpg>; + #sound-dai-cells = <0>; + status = "disabled"; + }; + + ssi2: ssi@1004a400 { + compatible = "renesas,r9a07g054-ssi", + "renesas,rz-ssi"; + reg = <0 0x1004a400 0 0x400>; + interrupts = <GIC_SPI 334 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 335 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 336 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 337 IRQ_TYPE_EDGE_RISING>; + interrupt-names = "int_req", "dma_rx", "dma_tx", "dma_rt"; + clocks = <&cpg CPG_MOD R9A07G054_SSI2_PCLK2>, + <&cpg CPG_MOD R9A07G054_SSI2_PCLK_SFR>, + <&audio_clk1>, <&audio_clk2>; + clock-names = "ssi", "ssi_sfr", "audio_clk1", "audio_clk2"; + resets = <&cpg R9A07G054_SSI2_RST_M2_REG>; + dmas = <&dmac 0x265f>; + dma-names = "rt"; + power-domains = <&cpg>; + #sound-dai-cells = <0>; + status = "disabled"; + }; + + ssi3: ssi@1004a800 { + compatible = "renesas,r9a07g054-ssi", + "renesas,rz-ssi"; + reg = <0 0x1004a800 0 0x400>; + interrupts = <GIC_SPI 338 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 339 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 340 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 341 IRQ_TYPE_EDGE_RISING>; + interrupt-names = "int_req", "dma_rx", "dma_tx", "dma_rt"; + clocks = <&cpg CPG_MOD R9A07G054_SSI3_PCLK2>, + <&cpg CPG_MOD R9A07G054_SSI3_PCLK_SFR>, + <&audio_clk1>, <&audio_clk2>; + clock-names = "ssi", "ssi_sfr", "audio_clk1", "audio_clk2"; + resets = <&cpg R9A07G054_SSI3_RST_M2_REG>; + dmas = <&dmac 0x2661>, <&dmac 0x2662>; + dma-names = "tx", "rx"; + power-domains = <&cpg>; + #sound-dai-cells = <0>; + status = "disabled"; + }; + + spi0: spi@1004ac00 { + compatible = "renesas,r9a07g054-rspi", "renesas,rspi-rz"; + reg = <0 0x1004ac00 0 0x400>; + interrupts = <GIC_SPI 415 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 413 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 414 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "error", "rx", "tx"; + clocks = <&cpg CPG_MOD R9A07G054_RSPI0_CLKB>; + resets = <&cpg R9A07G054_RSPI0_RST>; + power-domains = <&cpg>; + num-cs = <1>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; }; spi1: spi@1004b000 { + compatible = "renesas,r9a07g054-rspi", "renesas,rspi-rz"; reg = <0 0x1004b000 0 0x400>; + interrupts = <GIC_SPI 418 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 416 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 417 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "error", "rx", "tx"; + clocks = <&cpg CPG_MOD R9A07G054_RSPI1_CLKB>; + resets = <&cpg R9A07G054_RSPI1_RST>; + power-domains = <&cpg>; + num-cs = <1>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + spi2: spi@1004b400 { + compatible = "renesas,r9a07g054-rspi", "renesas,rspi-rz"; + reg = <0 0x1004b400 0 0x400>; + interrupts = <GIC_SPI 421 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 419 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 420 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "error", "rx", "tx"; + clocks = <&cpg CPG_MOD R9A07G054_RSPI2_CLKB>; + resets = <&cpg R9A07G054_RSPI2_RST>; + power-domains = <&cpg>; + num-cs = <1>; #address-cells = <1>; #size-cells = <0>; - /* place holder */ + status = "disabled"; }; scif0: serial@1004b800 { @@ -234,43 +426,194 @@ }; canfd: can@10050000 { + compatible = "renesas,r9a07g054-canfd", "renesas,rzg2l-canfd"; reg = <0 0x10050000 0 0x8000>; - /* place holder */ + interrupts = <GIC_SPI 426 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 427 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 422 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 424 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 428 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 423 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 425 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 429 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "g_err", "g_recc", + "ch0_err", "ch0_rec", "ch0_trx", + "ch1_err", "ch1_rec", "ch1_trx"; + clocks = <&cpg CPG_MOD R9A07G054_CANFD_PCLK>, + <&cpg CPG_CORE R9A07G054_CLK_P0_DIV2>, + <&can_clk>; + clock-names = "fck", "canfd", "can_clk"; + assigned-clocks = <&cpg CPG_CORE R9A07G054_CLK_P0_DIV2>; + assigned-clock-rates = <50000000>; + resets = <&cpg R9A07G054_CANFD_RSTP_N>, + <&cpg R9A07G054_CANFD_RSTC_N>; + reset-names = "rstp_n", "rstc_n"; + power-domains = <&cpg>; + status = "disabled"; + + channel0 { + status = "disabled"; + }; + channel1 { + status = "disabled"; + }; }; i2c0: i2c@10058000 { #address-cells = <1>; #size-cells = <0>; + compatible = "renesas,riic-r9a07g054", "renesas,riic-rz"; reg = <0 0x10058000 0 0x400>; - /* place holder */ + interrupts = <GIC_SPI 350 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 348 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 349 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 352 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 353 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 351 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 354 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 355 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "tei", "ri", "ti", "spi", "sti", + "naki", "ali", "tmoi"; + clocks = <&cpg CPG_MOD R9A07G054_I2C0_PCLK>; + clock-frequency = <100000>; + resets = <&cpg R9A07G054_I2C0_MRST>; + power-domains = <&cpg>; + status = "disabled"; }; i2c1: i2c@10058400 { #address-cells = <1>; #size-cells = <0>; + compatible = "renesas,riic-r9a07g054", "renesas,riic-rz"; reg = <0 0x10058400 0 0x400>; - /* place holder */ + interrupts = <GIC_SPI 358 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 356 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 357 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 360 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 361 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 359 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 362 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 363 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "tei", "ri", "ti", "spi", "sti", + "naki", "ali", "tmoi"; + clocks = <&cpg CPG_MOD R9A07G054_I2C1_PCLK>; + clock-frequency = <100000>; + resets = <&cpg R9A07G054_I2C1_MRST>; + power-domains = <&cpg>; + status = "disabled"; + }; + + i2c2: i2c@10058800 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "renesas,riic-r9a07g054", "renesas,riic-rz"; + reg = <0 0x10058800 0 0x400>; + interrupts = <GIC_SPI 366 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 364 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 365 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 368 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 369 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 367 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 370 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 371 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "tei", "ri", "ti", "spi", "sti", + "naki", "ali", "tmoi"; + clocks = <&cpg CPG_MOD R9A07G054_I2C2_PCLK>; + clock-frequency = <100000>; + resets = <&cpg R9A07G054_I2C2_MRST>; + power-domains = <&cpg>; + status = "disabled"; }; i2c3: i2c@10058c00 { #address-cells = <1>; #size-cells = <0>; + compatible = "renesas,riic-r9a07g054", "renesas,riic-rz"; reg = <0 0x10058c00 0 0x400>; - /* place holder */ + interrupts = <GIC_SPI 374 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 372 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 373 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 376 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 377 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 375 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 378 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 379 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "tei", "ri", "ti", "spi", "sti", + "naki", "ali", "tmoi"; + clocks = <&cpg CPG_MOD R9A07G054_I2C3_PCLK>; + clock-frequency = <100000>; + resets = <&cpg R9A07G054_I2C3_MRST>; + power-domains = <&cpg>; + status = "disabled"; }; adc: adc@10059000 { + compatible = "renesas,r9a07g054-adc", "renesas,rzg2l-adc"; reg = <0 0x10059000 0 0x400>; - /* place holder */ + interrupts = <GIC_SPI 347 IRQ_TYPE_EDGE_RISING>; + clocks = <&cpg CPG_MOD R9A07G054_ADC_ADCLK>, + <&cpg CPG_MOD R9A07G054_ADC_PCLK>; + clock-names = "adclk", "pclk"; + resets = <&cpg R9A07G054_ADC_PRESETN>, + <&cpg R9A07G054_ADC_ADRST_N>; + reset-names = "presetn", "adrst-n"; + power-domains = <&cpg>; + status = "disabled"; + + #address-cells = <1>; + #size-cells = <0>; + + channel@0 { + reg = <0>; + }; + channel@1 { + reg = <1>; + }; + channel@2 { + reg = <2>; + }; + channel@3 { + reg = <3>; + }; + channel@4 { + reg = <4>; + }; + channel@5 { + reg = <5>; + }; + channel@6 { + reg = <6>; + }; + channel@7 { + reg = <7>; + }; + }; + + tsu: thermal@10059400 { + compatible = "renesas,r9a07g054-tsu", + "renesas,rzg2l-tsu"; + reg = <0 0x10059400 0 0x400>; + clocks = <&cpg CPG_MOD R9A07G054_TSU_PCLK>; + resets = <&cpg R9A07G054_TSU_PRESETN>; + power-domains = <&cpg>; + #thermal-sensor-cells = <1>; }; sbc: spi@10060000 { + compatible = "renesas,r9a07g054-rpc-if", + "renesas,rzg2l-rpc-if"; reg = <0 0x10060000 0 0x10000>, <0 0x20000000 0 0x10000000>, <0 0x10070000 0 0x10000>; + reg-names = "regs", "dirmap", "wbuf"; + interrupts = <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD R9A07G054_SPI_CLK2>, + <&cpg CPG_MOD R9A07G054_SPI_CLK>; + resets = <&cpg R9A07G054_SPI_RST>; + power-domains = <&cpg>; #address-cells = <1>; #size-cells = <0>; - /* place holder */ + status = "disabled"; }; cpg: clock-controller@11010000 { @@ -346,8 +689,24 @@ }; gpu: gpu@11840000 { + compatible = "renesas,r9a07g054-mali", + "arm,mali-bifrost"; reg = <0x0 0x11840000 0x0 0x10000>; - /* place holder */ + interrupts = <GIC_SPI 154 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 155 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 153 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 156 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "job", "mmu", "gpu", "event"; + clocks = <&cpg CPG_MOD R9A07G054_GPU_CLK>, + <&cpg CPG_MOD R9A07G054_GPU_AXI_CLK>, + <&cpg CPG_MOD R9A07G054_GPU_ACE_CLK>; + clock-names = "gpu", "bus", "bus_ace"; + power-domains = <&cpg>; + resets = <&cpg R9A07G054_GPU_RESETN>, + <&cpg R9A07G054_GPU_AXI_RESETN>, + <&cpg R9A07G054_GPU_ACE_RESETN>; + reset-names = "rst", "axi_rst", "ace_rst"; + operating-points-v2 = <&gpu_opp_table>; }; gic: interrupt-controller@11900000 { @@ -361,13 +720,35 @@ }; sdhi0: mmc@11c00000 { + compatible = "renesas,sdhi-r9a07g054", + "renesas,rcar-gen3-sdhi"; reg = <0x0 0x11c00000 0 0x10000>; - /* place holder */ + interrupts = <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD R9A07G054_SDHI0_IMCLK>, + <&cpg CPG_MOD R9A07G054_SDHI0_CLK_HS>, + <&cpg CPG_MOD R9A07G054_SDHI0_IMCLK2>, + <&cpg CPG_MOD R9A07G054_SDHI0_ACLK>; + clock-names = "core", "clkh", "cd", "aclk"; + resets = <&cpg R9A07G054_SDHI0_IXRST>; + power-domains = <&cpg>; + status = "disabled"; }; sdhi1: mmc@11c10000 { + compatible = "renesas,sdhi-r9a07g054", + "renesas,rcar-gen3-sdhi"; reg = <0x0 0x11c10000 0 0x10000>; - /* place holder */ + interrupts = <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD R9A07G054_SDHI1_IMCLK>, + <&cpg CPG_MOD R9A07G054_SDHI1_CLK_HS>, + <&cpg CPG_MOD R9A07G054_SDHI1_IMCLK2>, + <&cpg CPG_MOD R9A07G054_SDHI1_ACLK>; + clock-names = "core", "clkh", "cd", "aclk"; + resets = <&cpg R9A07G054_SDHI1_IXRST>; + power-domains = <&cpg>; + status = "disabled"; }; eth0: ethernet@11c20000 { @@ -411,73 +792,226 @@ }; phyrst: usbphy-ctrl@11c40000 { + compatible = "renesas,r9a07g054-usbphy-ctrl", + "renesas,rzg2l-usbphy-ctrl"; reg = <0 0x11c40000 0 0x10000>; - /* place holder */ + clocks = <&cpg CPG_MOD R9A07G054_USB_PCLK>; + resets = <&cpg R9A07G054_USB_PRESETN>; + power-domains = <&cpg>; + #reset-cells = <1>; + status = "disabled"; }; ohci0: usb@11c50000 { + compatible = "generic-ohci"; reg = <0 0x11c50000 0 0x100>; - /* place holder */ + interrupts = <GIC_SPI 91 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD R9A07G054_USB_PCLK>, + <&cpg CPG_MOD R9A07G054_USB_U2H0_HCLK>; + resets = <&phyrst 0>, + <&cpg R9A07G054_USB_U2H0_HRESETN>; + phys = <&usb2_phy0 1>; + phy-names = "usb"; + power-domains = <&cpg>; + status = "disabled"; }; ohci1: usb@11c70000 { + compatible = "generic-ohci"; reg = <0 0x11c70000 0 0x100>; - /* place holder */ + interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD R9A07G054_USB_PCLK>, + <&cpg CPG_MOD R9A07G054_USB_U2H1_HCLK>; + resets = <&phyrst 1>, + <&cpg R9A07G054_USB_U2H1_HRESETN>; + phys = <&usb2_phy1 1>; + phy-names = "usb"; + power-domains = <&cpg>; + status = "disabled"; }; ehci0: usb@11c50100 { + compatible = "generic-ehci"; reg = <0 0x11c50100 0 0x100>; - /* place holder */ + interrupts = <GIC_SPI 92 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD R9A07G054_USB_PCLK>, + <&cpg CPG_MOD R9A07G054_USB_U2H0_HCLK>; + resets = <&phyrst 0>, + <&cpg R9A07G054_USB_U2H0_HRESETN>; + phys = <&usb2_phy0 2>; + phy-names = "usb"; + companion = <&ohci0>; + power-domains = <&cpg>; + status = "disabled"; }; ehci1: usb@11c70100 { + compatible = "generic-ehci"; reg = <0 0x11c70100 0 0x100>; - /* place holder */ + interrupts = <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD R9A07G054_USB_PCLK>, + <&cpg CPG_MOD R9A07G054_USB_U2H1_HCLK>; + resets = <&phyrst 1>, + <&cpg R9A07G054_USB_U2H1_HRESETN>; + phys = <&usb2_phy1 2>; + phy-names = "usb"; + companion = <&ohci1>; + power-domains = <&cpg>; + status = "disabled"; }; usb2_phy0: usb-phy@11c50200 { + compatible = "renesas,usb2-phy-r9a07g054", + "renesas,rzg2l-usb2-phy"; reg = <0 0x11c50200 0 0x700>; - /* place holder */ + interrupts = <GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD R9A07G054_USB_PCLK>, + <&cpg CPG_MOD R9A07G054_USB_U2H0_HCLK>; + resets = <&phyrst 0>; + #phy-cells = <1>; + power-domains = <&cpg>; + status = "disabled"; }; usb2_phy1: usb-phy@11c70200 { + compatible = "renesas,usb2-phy-r9a07g054", + "renesas,rzg2l-usb2-phy"; reg = <0 0x11c70200 0 0x700>; - /* place holder */ + interrupts = <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD R9A07G054_USB_PCLK>, + <&cpg CPG_MOD R9A07G054_USB_U2H1_HCLK>; + resets = <&phyrst 1>; + #phy-cells = <1>; + power-domains = <&cpg>; + status = "disabled"; }; hsusb: usb@11c60000 { + compatible = "renesas,usbhs-r9a07g054", + "renesas,rza2-usbhs"; reg = <0 0x11c60000 0 0x10000>; - /* place holder */ + interrupts = <GIC_SPI 100 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD R9A07G054_USB_PCLK>, + <&cpg CPG_MOD R9A07G054_USB_U2P_EXR_CPUCLK>; + resets = <&phyrst 0>, + <&cpg R9A07G054_USB_U2P_EXL_SYSRST>; + renesas,buswait = <7>; + phys = <&usb2_phy0 3>; + phy-names = "usb"; + power-domains = <&cpg>; + status = "disabled"; }; wdt0: watchdog@12800800 { + compatible = "renesas,r9a07g054-wdt", + "renesas,rzg2l-wdt"; reg = <0 0x12800800 0 0x400>; - /* place holder */ + clocks = <&cpg CPG_MOD R9A07G054_WDT0_PCLK>, + <&cpg CPG_MOD R9A07G054_WDT0_CLK>; + clock-names = "pclk", "oscclk"; + interrupts = <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 50 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "wdt", "perrout"; + resets = <&cpg R9A07G054_WDT0_PRESETN>; + power-domains = <&cpg>; + status = "disabled"; }; wdt1: watchdog@12800c00 { + compatible = "renesas,r9a07g054-wdt", + "renesas,rzg2l-wdt"; reg = <0 0x12800C00 0 0x400>; - /* place holder */ + clocks = <&cpg CPG_MOD R9A07G054_WDT1_PCLK>, + <&cpg CPG_MOD R9A07G054_WDT1_CLK>; + clock-names = "pclk", "oscclk"; + interrupts = <GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "wdt", "perrout"; + resets = <&cpg R9A07G054_WDT1_PRESETN>; + power-domains = <&cpg>; + status = "disabled"; }; wdt2: watchdog@12800400 { + compatible = "renesas,r9a07g054-wdt", + "renesas,rzg2l-wdt"; reg = <0 0x12800400 0 0x400>; - /* place holder */ + clocks = <&cpg CPG_MOD R9A07G054_WDT2_PCLK>, + <&cpg CPG_MOD R9A07G054_WDT2_CLK>; + clock-names = "pclk", "oscclk"; + interrupts = <GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "wdt", "perrout"; + resets = <&cpg R9A07G054_WDT2_PRESETN>; + power-domains = <&cpg>; + status = "disabled"; }; ostm0: timer@12801000 { + compatible = "renesas,r9a07g054-ostm", + "renesas,ostm"; reg = <0x0 0x12801000 0x0 0x400>; - /* place holder */ + interrupts = <GIC_SPI 46 IRQ_TYPE_EDGE_RISING>; + clocks = <&cpg CPG_MOD R9A07G054_OSTM0_PCLK>; + resets = <&cpg R9A07G054_OSTM0_PRESETZ>; + power-domains = <&cpg>; + status = "disabled"; }; ostm1: timer@12801400 { + compatible = "renesas,r9a07g054-ostm", + "renesas,ostm"; reg = <0x0 0x12801400 0x0 0x400>; - /* place holder */ + interrupts = <GIC_SPI 47 IRQ_TYPE_EDGE_RISING>; + clocks = <&cpg CPG_MOD R9A07G054_OSTM1_PCLK>; + resets = <&cpg R9A07G054_OSTM1_PRESETZ>; + power-domains = <&cpg>; + status = "disabled"; }; ostm2: timer@12801800 { + compatible = "renesas,r9a07g054-ostm", + "renesas,ostm"; reg = <0x0 0x12801800 0x0 0x400>; - /* place holder */ + interrupts = <GIC_SPI 48 IRQ_TYPE_EDGE_RISING>; + clocks = <&cpg CPG_MOD R9A07G054_OSTM2_PCLK>; + resets = <&cpg R9A07G054_OSTM2_PRESETZ>; + power-domains = <&cpg>; + status = "disabled"; + }; + }; + + thermal-zones { + cpu-thermal { + polling-delay-passive = <250>; + polling-delay = <1000>; + thermal-sensors = <&tsu 0>; + sustainable-power = <717>; + + cooling-maps { + map0 { + trip = <&target>; + cooling-device = <&cpu0 0 2>; + contribution = <1024>; + }; + }; + + trips { + sensor_crit: sensor-crit { + temperature = <125000>; + hysteresis = <1000>; + type = "critical"; + }; + + target: trip-point { + temperature = <100000>; + hysteresis = <1000>; + type = "passive"; + }; + }; }; }; diff --git a/arch/arm64/boot/dts/renesas/r9a07g054l2-smarc.dts b/arch/arm64/boot/dts/renesas/r9a07g054l2-smarc.dts index fc334b4c2aa4..4e07e1a0fb66 100644 --- a/arch/arm64/boot/dts/renesas/r9a07g054l2-smarc.dts +++ b/arch/arm64/boot/dts/renesas/r9a07g054l2-smarc.dts @@ -16,11 +16,3 @@ model = "Renesas SMARC EVK based on r9a07g054l2"; compatible = "renesas,smarc-evk", "renesas,r9a07g054l2", "renesas,r9a07g054"; }; - -&pinctrl { - /delete-node/ can0-stb-hog; - /delete-node/ can1-stb-hog; - /delete-node/ gpio-sd0-pwr-en-hog; - /delete-node/ sd0-dev-sel-hog; - /delete-node/ sd1-pwr-en-hog; -}; diff --git a/arch/arm64/boot/dts/renesas/r9a09g011-v2mevk2.dts b/arch/arm64/boot/dts/renesas/r9a09g011-v2mevk2.dts new file mode 100644 index 000000000000..c207d8ce5523 --- /dev/null +++ b/arch/arm64/boot/dts/renesas/r9a09g011-v2mevk2.dts @@ -0,0 +1,44 @@ +// SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +/* + * Device Tree Source for the RZ/V2M (r9a09g011) Evaluation Kit Board + * + * Copyright (C) 2022 Renesas Electronics Corp. + */ + +/dts-v1/; +#include "r9a09g011.dtsi" + +/ { + model = "RZ/V2M Evaluation Kit 2.0"; + compatible = "renesas,rzv2mevk2", "renesas,r9a09g011"; + + aliases { + serial0 = &uart0; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + memory@58000000 { + device_type = "memory"; + /* + * first 1.25GiB is reserved for ISP Firmware, + * next 128MiB is reserved for secure area. + */ + reg = <0x0 0x58000000 0x0 0x28000000>; + }; + + memory@180000000 { + device_type = "memory"; + reg = <0x1 0x80000000 0x0 0x80000000>; + }; +}; + +&extal_clk { + clock-frequency = <48000000>; +}; + +&uart0 { + status = "okay"; +}; diff --git a/arch/arm64/boot/dts/renesas/r9a09g011.dtsi b/arch/arm64/boot/dts/renesas/r9a09g011.dtsi new file mode 100644 index 000000000000..27810f4ad4cb --- /dev/null +++ b/arch/arm64/boot/dts/renesas/r9a09g011.dtsi @@ -0,0 +1,93 @@ +// SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +/* + * Device Tree Source for the RZ/V2M SoC + * + * Copyright (C) 2022 Renesas Electronics Corp. + */ + +#include <dt-bindings/interrupt-controller/arm-gic.h> +#include <dt-bindings/clock/r9a09g011-cpg.h> + +/ { + compatible = "renesas,r9a09g011"; + #address-cells = <2>; + #size-cells = <2>; + + /* clock can be either from exclk or crystal oscillator (XIN/XOUT) */ + extal_clk: extal { + compatible = "fixed-clock"; + #clock-cells = <0>; + /* This value must be overridden by the board */ + clock-frequency = <0>; + }; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + cpu-map { + cluster0 { + core0 { + cpu = <&cpu0>; + }; + }; + }; + + cpu0: cpu@0 { + compatible = "arm,cortex-a53"; + reg = <0>; + device_type = "cpu"; + clocks = <&cpg CPG_MOD R9A09G011_CA53_CLK>; + }; + }; + + soc: soc { + compatible = "simple-bus"; + interrupt-parent = <&gic>; + #address-cells = <2>; + #size-cells = <2>; + ranges; + + gic: interrupt-controller@82000000 { + compatible = "arm,gic-400"; + #interrupt-cells = <3>; + #address-cells = <0>; + interrupt-controller; + reg = <0x0 0x82010000 0 0x1000>, + <0x0 0x82020000 0 0x20000>, + <0x0 0x82040000 0 0x20000>, + <0x0 0x82060000 0 0x20000>; + interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(1) | IRQ_TYPE_LEVEL_HIGH)>; + clocks = <&cpg CPG_MOD R9A09G011_GIC_CLK>; + clock-names = "clk"; + }; + + cpg: clock-controller@a3500000 { + compatible = "renesas,r9a09g011-cpg"; + reg = <0 0xa3500000 0 0x1000>; + clocks = <&extal_clk>; + clock-names = "extal"; + #clock-cells = <2>; + #reset-cells = <1>; + #power-domain-cells = <0>; + }; + + uart0: serial@a4040000 { + compatible = "renesas,r9a09g011-uart", "renesas,em-uart"; + reg = <0 0xa4040000 0 0x80>; + interrupts = <GIC_SPI 240 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD R9A09G011_URT0_CLK>, + <&cpg CPG_MOD R9A09G011_URT_PCLK>; + clock-names = "sclk", "pclk"; + status = "disabled"; + }; + }; + + timer { + compatible = "arm,armv8-timer"; + interrupts-extended = <&gic GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(1) | IRQ_TYPE_LEVEL_LOW)>, + <&gic GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(1) | IRQ_TYPE_LEVEL_LOW)>, + <&gic GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(1) | IRQ_TYPE_LEVEL_LOW)>, + <&gic GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(1) | IRQ_TYPE_LEVEL_LOW)>; + }; +}; diff --git a/arch/arm64/boot/dts/renesas/rz-smarc-common.dtsi b/arch/arm64/boot/dts/renesas/rz-smarc-common.dtsi index 588117aafaca..3962d47b3e59 100644 --- a/arch/arm64/boot/dts/renesas/rz-smarc-common.dtsi +++ b/arch/arm64/boot/dts/renesas/rz-smarc-common.dtsi @@ -26,7 +26,6 @@ serial0 = &scif0; i2c0 = &i2c0; i2c1 = &i2c1; - i2c3 = &i2c3; }; chosen { @@ -53,7 +52,6 @@ "Mic Bias", "Microphone Jack"; cpu_dai: simple-audio-card,cpu { - sound-dai = <&ssi0>; }; codec_dai: simple-audio-card,codec { @@ -75,7 +73,6 @@ regulator-name = "SDHI1 VccQ"; regulator-min-microvolt = <1800000>; regulator-max-microvolt = <3300000>; - gpios = <&pinctrl RZG2L_GPIO(39, 1) GPIO_ACTIVE_HIGH>; gpios-states = <1>; states = <3300000 1>, <1800000 0>; }; @@ -131,20 +128,6 @@ status = "okay"; }; -&i2c3 { - pinctrl-0 = <&i2c3_pins>; - pinctrl-names = "default"; - clock-frequency = <400000>; - - status = "okay"; - - wm8978: codec@1a { - compatible = "wlf,wm8978"; - #sound-dai-cells = <0>; - reg = <0x1a>; - }; -}; - &ohci0 { dr_mode = "otg"; status = "okay"; @@ -184,13 +167,6 @@ status = "okay"; }; -&ssi0 { - pinctrl-0 = <&ssi0_pins>; - pinctrl-names = "default"; - - status = "okay"; -}; - &usb2_phy0 { pinctrl-0 = <&usb0_pins>; pinctrl-names = "default"; diff --git a/arch/arm64/boot/dts/renesas/rzg2l-smarc.dtsi b/arch/arm64/boot/dts/renesas/rzg2l-smarc.dtsi index 33ddfd18bd56..e180a955b6ac 100644 --- a/arch/arm64/boot/dts/renesas/rzg2l-smarc.dtsi +++ b/arch/arm64/boot/dts/renesas/rzg2l-smarc.dtsi @@ -14,6 +14,25 @@ / { aliases { serial1 = &scif2; + i2c3 = &i2c3; + }; +}; + +&cpu_dai { + sound-dai = <&ssi0>; +}; + +&i2c3 { + pinctrl-0 = <&i2c3_pins>; + pinctrl-names = "default"; + clock-frequency = <400000>; + + status = "okay"; + + wm8978: codec@1a { + compatible = "wlf,wm8978"; + #sound-dai-cells = <0>; + reg = <0x1a>; }; }; @@ -33,3 +52,14 @@ status = "okay"; }; #endif + +&ssi0 { + pinctrl-0 = <&ssi0_pins>; + pinctrl-names = "default"; + + status = "okay"; +}; + +&vccq_sdhi1 { + gpios = <&pinctrl RZG2L_GPIO(39, 1) GPIO_ACTIVE_HIGH>; +}; diff --git a/arch/arm64/boot/dts/renesas/rzg2lc-smarc-pinfunction.dtsi b/arch/arm64/boot/dts/renesas/rzg2lc-smarc-pinfunction.dtsi index 37ff2091582e..a78a8def363e 100644 --- a/arch/arm64/boot/dts/renesas/rzg2lc-smarc-pinfunction.dtsi +++ b/arch/arm64/boot/dts/renesas/rzg2lc-smarc-pinfunction.dtsi @@ -12,11 +12,6 @@ pinctrl-0 = <&sound_clk_pins>; pinctrl-names = "default"; - scif0_pins: scif0 { - pinmux = <RZG2L_PORT_PINMUX(38, 0, 1)>, /* TxD */ - <RZG2L_PORT_PINMUX(38, 1, 1)>; /* RxD */ - }; - #if SW_SCIF_CAN /* SW8 should be at position 2->1 */ can1_pins: can1 { @@ -25,13 +20,6 @@ }; #endif - scif1_pins: scif1 { - pinmux = <RZG2L_PORT_PINMUX(40, 0, 1)>, /* TxD */ - <RZG2L_PORT_PINMUX(40, 1, 1)>, /* RxD */ - <RZG2L_PORT_PINMUX(41, 0, 1)>, /* CTS# */ - <RZG2L_PORT_PINMUX(41, 1, 1)>; /* RTS# */ - }; - #if SW_RSPI_CAN /* SW8 should be at position 2->3 so that GPIO9_CAN1_STB line is activated */ can1-stb-hog { @@ -47,6 +35,33 @@ }; #endif + i2c0_pins: i2c0 { + pins = "RIIC0_SDA", "RIIC0_SCL"; + input-enable; + }; + + i2c1_pins: i2c1 { + pins = "RIIC1_SDA", "RIIC1_SCL"; + input-enable; + }; + + i2c2_pins: i2c2 { + pinmux = <RZG2L_PORT_PINMUX(42, 3, 1)>, /* SDA */ + <RZG2L_PORT_PINMUX(42, 4, 1)>; /* SCL */ + }; + + scif0_pins: scif0 { + pinmux = <RZG2L_PORT_PINMUX(38, 0, 1)>, /* TxD */ + <RZG2L_PORT_PINMUX(38, 1, 1)>; /* RxD */ + }; + + scif1_pins: scif1 { + pinmux = <RZG2L_PORT_PINMUX(40, 0, 1)>, /* TxD */ + <RZG2L_PORT_PINMUX(40, 1, 1)>, /* RxD */ + <RZG2L_PORT_PINMUX(41, 0, 1)>, /* CTS# */ + <RZG2L_PORT_PINMUX(41, 1, 1)>; /* RTS# */ + }; + sd1-pwr-en-hog { gpio-hog; gpios = <RZG2L_GPIO(39, 2) GPIO_ACTIVE_HIGH>; @@ -90,5 +105,30 @@ pins = "AUDIO_CLK1", "AUDIO_CLK2"; input-enable; }; + + spi1_pins: spi1 { + pinmux = <RZG2L_PORT_PINMUX(44, 0, 1)>, /* CK */ + <RZG2L_PORT_PINMUX(44, 1, 1)>, /* MOSI */ + <RZG2L_PORT_PINMUX(44, 2, 1)>, /* MISO */ + <RZG2L_PORT_PINMUX(44, 3, 1)>; /* SSL */ + }; + + ssi0_pins: ssi0 { + pinmux = <RZG2L_PORT_PINMUX(45, 0, 1)>, /* BCK */ + <RZG2L_PORT_PINMUX(45, 1, 1)>, /* RCK */ + <RZG2L_PORT_PINMUX(45, 2, 1)>, /* TXD */ + <RZG2L_PORT_PINMUX(45, 3, 1)>; /* RXD */ + }; + + usb0_pins: usb0 { + pinmux = <RZG2L_PORT_PINMUX(4, 0, 1)>, /* VBUS */ + <RZG2L_PORT_PINMUX(5, 0, 1)>, /* OVC */ + <RZG2L_PORT_PINMUX(5, 1, 1)>; /* OTG_ID */ + }; + + usb1_pins: usb1 { + pinmux = <RZG2L_PORT_PINMUX(42, 0, 1)>, /* VBUS */ + <RZG2L_PORT_PINMUX(42, 1, 1)>; /* OVC */ + }; }; diff --git a/arch/arm64/boot/dts/renesas/rzg2lc-smarc-som.dtsi b/arch/arm64/boot/dts/renesas/rzg2lc-smarc-som.dtsi index 88a7938017aa..959a0ad1d367 100644 --- a/arch/arm64/boot/dts/renesas/rzg2lc-smarc-som.dtsi +++ b/arch/arm64/boot/dts/renesas/rzg2lc-smarc-som.dtsi @@ -41,6 +41,15 @@ regulator-always-on; }; + reg_1p1v: regulator-vdd-core { + compatible = "regulator-fixed"; + regulator-name = "fixed-1.1V"; + regulator-min-microvolt = <1100000>; + regulator-max-microvolt = <1100000>; + regulator-boot-on; + regulator-always-on; + }; + vccq_sdhi0: regulator-vccq-sdhi0 { compatible = "regulator-gpio"; @@ -84,6 +93,18 @@ clock-frequency = <24000000>; }; +&gpu { + mali-supply = <®_1p1v>; +}; + +&ostm1 { + status = "okay"; +}; + +&ostm2 { + status = "okay"; +}; + &pinctrl { eth0_pins: eth0 { pinmux = <RZG2L_PORT_PINMUX(28, 1, 1)>, /* ET0_LINKSTA */ @@ -110,6 +131,18 @@ line-name = "gpio_sd0_pwr_en"; }; + qspi0_pins: qspi0 { + qspi0-data { + pins = "QSPI0_IO0", "QSPI0_IO1", "QSPI0_IO2", "QSPI0_IO3"; + power-source = <1800>; + }; + + qspi0-ctrl { + pins = "QSPI0_SPCLK", "QSPI0_SSL", "QSPI_RESET#"; + power-source = <1800>; + }; + }; + /* * SD0 device selection is XOR between GPIO_SD0_DEV_SEL and SW1[2] * The below switch logic can be used to select the device between @@ -175,6 +208,34 @@ }; }; +&sbc { + pinctrl-0 = <&qspi0_pins>; + pinctrl-names = "default"; + status = "okay"; + + flash@0 { + compatible = "micron,mt25qu512a", "jedec,spi-nor"; + reg = <0>; + m25p,fast-read; + spi-max-frequency = <50000000>; + spi-rx-bus-width = <4>; + + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + boot@0 { + reg = <0x00000000 0x2000000>; + read-only; + }; + user@2000000 { + reg = <0x2000000 0x2000000>; + }; + }; + }; +}; + #if (!SW_SD0_DEV_SEL) &sdhi0 { pinctrl-0 = <&sdhi0_pins>; diff --git a/arch/arm64/boot/dts/renesas/rzg2lc-smarc.dtsi b/arch/arm64/boot/dts/renesas/rzg2lc-smarc.dtsi index df7631fe5fac..aa170492dd2b 100644 --- a/arch/arm64/boot/dts/renesas/rzg2lc-smarc.dtsi +++ b/arch/arm64/boot/dts/renesas/rzg2lc-smarc.dtsi @@ -43,6 +43,7 @@ / { aliases { serial1 = &scif1; + i2c2 = &i2c2; }; }; @@ -59,6 +60,24 @@ }; #endif +&cpu_dai { + sound-dai = <&ssi0>; +}; + +&i2c2 { + pinctrl-0 = <&i2c2_pins>; + pinctrl-names = "default"; + clock-frequency = <400000>; + + status = "okay"; + + wm8978: codec@1a { + compatible = "wlf,wm8978"; + #sound-dai-cells = <0>; + reg = <0x1a>; + }; +}; + /* * To enable SCIF1 (SER0) on PMOD1 (CN7), On connector board * SW1 should be at position 2->3 so that SER0_CTS# line is activated @@ -75,3 +94,22 @@ status = "okay"; }; #endif + +&ssi0 { + pinctrl-0 = <&ssi0_pins>; + pinctrl-names = "default"; + + status = "okay"; +}; + +#if (SW_RSPI_CAN) +&spi1 { + /delete-property/ pinctrl-0; + /delete-property/ pinctrl-names; + status = "disabled"; +}; +#endif + +&vccq_sdhi1 { + gpios = <&pinctrl RZG2L_GPIO(39, 1) GPIO_ACTIVE_HIGH>; +}; diff --git a/arch/arm64/boot/dts/renesas/rzg2ul-smarc-pinfunction.dtsi b/arch/arm64/boot/dts/renesas/rzg2ul-smarc-pinfunction.dtsi new file mode 100644 index 000000000000..bd8bc858c28c --- /dev/null +++ b/arch/arm64/boot/dts/renesas/rzg2ul-smarc-pinfunction.dtsi @@ -0,0 +1,119 @@ +// SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +/* + * Device Tree Source for the RZ/G2UL SMARC pincontrol parts + * + * Copyright (C) 2022 Renesas Electronics Corp. + */ + +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/pinctrl/rzg2l-pinctrl.h> + +&pinctrl { + pinctrl-0 = <&sound_clk_pins>; + pinctrl-names = "default"; + + can0_pins: can0 { + pinmux = <RZG2L_PORT_PINMUX(1, 1, 3)>, /* TX */ + <RZG2L_PORT_PINMUX(1, 2, 3)>; /* RX */ + }; + +#if (SW_ET0_EN_N) + can0-stb-hog { + gpio-hog; + gpios = <RZG2L_GPIO(2, 2) GPIO_ACTIVE_HIGH>; + output-low; + line-name = "can0_stb"; + }; +#endif + + can1_pins: can1 { + pinmux = <RZG2L_PORT_PINMUX(2, 0, 3)>, /* TX */ + <RZG2L_PORT_PINMUX(2, 1, 3)>; /* RX */ + }; + +#if (SW_ET0_EN_N) + can1-stb-hog { + gpio-hog; + gpios = <RZG2L_GPIO(2, 3) GPIO_ACTIVE_HIGH>; + output-low; + line-name = "can1_stb"; + }; +#endif + + i2c0_pins: i2c0 { + pins = "RIIC0_SDA", "RIIC0_SCL"; + input-enable; + }; + + i2c1_pins: i2c1 { + pins = "RIIC1_SDA", "RIIC1_SCL"; + input-enable; + }; + + scif0_pins: scif0 { + pinmux = <RZG2L_PORT_PINMUX(6, 4, 6)>, /* TxD */ + <RZG2L_PORT_PINMUX(6, 3, 6)>; /* RxD */ + }; + + sd1-pwr-en-hog { + gpio-hog; + gpios = <RZG2L_GPIO(0, 3) GPIO_ACTIVE_HIGH>; + output-high; + line-name = "sd1_pwr_en"; + }; + + sdhi1_pins: sd1 { + sd1_data { + pins = "SD1_DATA0", "SD1_DATA1", "SD1_DATA2", "SD1_DATA3"; + power-source = <3300>; + }; + + sd1_ctrl { + pins = "SD1_CLK", "SD1_CMD"; + power-source = <3300>; + }; + + sd1_mux { + pinmux = <RZG2L_PORT_PINMUX(0, 2, 1)>; /* SD1_CD */ + }; + }; + + sdhi1_pins_uhs: sd1_uhs { + sd1_data_uhs { + pins = "SD1_DATA0", "SD1_DATA1", "SD1_DATA2", "SD1_DATA3"; + power-source = <1800>; + }; + + sd1_ctrl_uhs { + pins = "SD1_CLK", "SD1_CMD"; + power-source = <1800>; + }; + + sd1_mux_uhs { + pinmux = <RZG2L_PORT_PINMUX(0, 2, 1)>; /* SD1_CD */ + }; + }; + + sound_clk_pins: sound_clk { + pins = "AUDIO_CLK1", "AUDIO_CLK2"; + input-enable; + }; + + ssi1_pins: ssi1 { + pinmux = <RZG2L_PORT_PINMUX(3, 0, 2)>, /* BCK */ + <RZG2L_PORT_PINMUX(3, 1, 2)>, /* RCK */ + <RZG2L_PORT_PINMUX(3, 2, 2)>, /* TXD */ + <RZG2L_PORT_PINMUX(3, 3, 2)>; /* RXD */ + }; + + usb0_pins: usb0 { + pinmux = <RZG2L_PORT_PINMUX(5, 0, 1)>, /* VBUS */ + <RZG2L_PORT_PINMUX(5, 2, 1)>, /* OVC */ + <RZG2L_PORT_PINMUX(5, 3, 1)>; /* OTG_ID */ + }; + + usb1_pins: usb1 { + pinmux = <RZG2L_PORT_PINMUX(5, 4, 5)>, /* OVC */ + <RZG2L_PORT_PINMUX(6, 0, 1)>; /* VBUS */ + }; +}; diff --git a/arch/arm64/boot/dts/renesas/rzg2ul-smarc-som.dtsi b/arch/arm64/boot/dts/renesas/rzg2ul-smarc-som.dtsi new file mode 100644 index 000000000000..a663115f5aae --- /dev/null +++ b/arch/arm64/boot/dts/renesas/rzg2ul-smarc-som.dtsi @@ -0,0 +1,251 @@ +// SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +/* + * Device Tree Source for the RZ/G2UL SMARC SOM common parts + * + * Copyright (C) 2022 Renesas Electronics Corp. + */ + +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/pinctrl/rzg2l-pinctrl.h> + +/ { + aliases { + ethernet0 = ð0; + ethernet1 = ð1; + }; + + chosen { + bootargs = "ignore_loglevel rw root=/dev/nfs ip=on"; + }; + + memory@48000000 { + device_type = "memory"; + /* first 128MB is reserved for secure area. */ + reg = <0x0 0x48000000 0x0 0x38000000>; + }; + + reg_1p8v: regulator0 { + compatible = "regulator-fixed"; + regulator-name = "fixed-1.8V"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-boot-on; + regulator-always-on; + }; + + reg_3p3v: regulator1 { + compatible = "regulator-fixed"; + regulator-name = "fixed-3.3V"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-boot-on; + regulator-always-on; + }; + +#if !(SW_SW0_DEV_SEL) + vccq_sdhi0: regulator-vccq-sdhi0 { + compatible = "regulator-gpio"; + + regulator-name = "SDHI0 VccQ"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + states = <3300000 1>, <1800000 0>; + regulator-boot-on; + gpios = <&pinctrl RZG2L_GPIO(6, 2) GPIO_ACTIVE_HIGH>; + regulator-always-on; + }; +#endif +}; + +#if (!SW_ET0_EN_N) +ð0 { + pinctrl-0 = <ð0_pins>; + pinctrl-names = "default"; + phy-handle = <&phy0>; + phy-mode = "rgmii-id"; + status = "okay"; + + phy0: ethernet-phy@7 { + compatible = "ethernet-phy-id0022.1640", + "ethernet-phy-ieee802.3-c22"; + reg = <7>; + rxc-skew-psec = <2400>; + txc-skew-psec = <2400>; + rxdv-skew-psec = <0>; + txdv-skew-psec = <0>; + rxd0-skew-psec = <0>; + rxd1-skew-psec = <0>; + rxd2-skew-psec = <0>; + rxd3-skew-psec = <0>; + txd0-skew-psec = <0>; + txd1-skew-psec = <0>; + txd2-skew-psec = <0>; + txd3-skew-psec = <0>; + }; +}; +#endif + +ð1 { + pinctrl-0 = <ð1_pins>; + pinctrl-names = "default"; + phy-handle = <&phy1>; + phy-mode = "rgmii-id"; + status = "okay"; + + phy1: ethernet-phy@7 { + compatible = "ethernet-phy-id0022.1640", + "ethernet-phy-ieee802.3-c22"; + reg = <7>; + rxc-skew-psec = <2400>; + txc-skew-psec = <2400>; + rxdv-skew-psec = <0>; + txdv-skew-psec = <0>; + rxd0-skew-psec = <0>; + rxd1-skew-psec = <0>; + rxd2-skew-psec = <0>; + rxd3-skew-psec = <0>; + txd0-skew-psec = <0>; + txd1-skew-psec = <0>; + txd2-skew-psec = <0>; + txd3-skew-psec = <0>; + }; +}; + +&extal_clk { + clock-frequency = <24000000>; +}; + +&ostm1 { + status = "okay"; +}; + +&ostm2 { + status = "okay"; +}; + +&pinctrl { + eth0_pins: eth0 { + pinmux = <RZG2L_PORT_PINMUX(4, 5, 1)>, /* ET0_LINKSTA */ + <RZG2L_PORT_PINMUX(4, 3, 1)>, /* ET0_MDC */ + <RZG2L_PORT_PINMUX(4, 4, 1)>, /* ET0_MDIO */ + <RZG2L_PORT_PINMUX(1, 0, 1)>, /* ET0_TXC */ + <RZG2L_PORT_PINMUX(1, 1, 1)>, /* ET0_TX_CTL */ + <RZG2L_PORT_PINMUX(1, 2, 1)>, /* ET0_TXD0 */ + <RZG2L_PORT_PINMUX(1, 3, 1)>, /* ET0_TXD1 */ + <RZG2L_PORT_PINMUX(1, 4, 1)>, /* ET0_TXD2 */ + <RZG2L_PORT_PINMUX(2, 0, 1)>, /* ET0_TXD3 */ + <RZG2L_PORT_PINMUX(3, 0, 1)>, /* ET0_RXC */ + <RZG2L_PORT_PINMUX(3, 1, 1)>, /* ET0_RX_CTL */ + <RZG2L_PORT_PINMUX(3, 2, 1)>, /* ET0_RXD0 */ + <RZG2L_PORT_PINMUX(3, 3, 1)>, /* ET0_RXD1 */ + <RZG2L_PORT_PINMUX(4, 0, 1)>, /* ET0_RXD2 */ + <RZG2L_PORT_PINMUX(4, 1, 1)>; /* ET0_RXD3 */ + }; + + eth1_pins: eth1 { + pinmux = <RZG2L_PORT_PINMUX(10, 4, 1)>, /* ET1_LINKSTA */ + <RZG2L_PORT_PINMUX(10, 2, 1)>, /* ET1_MDC */ + <RZG2L_PORT_PINMUX(10, 3, 1)>, /* ET1_MDIO */ + <RZG2L_PORT_PINMUX(7, 0, 1)>, /* ET1_TXC */ + <RZG2L_PORT_PINMUX(7, 1, 1)>, /* ET1_TX_CTL */ + <RZG2L_PORT_PINMUX(7, 2, 1)>, /* ET1_TXD0 */ + <RZG2L_PORT_PINMUX(7, 3, 1)>, /* ET1_TXD1 */ + <RZG2L_PORT_PINMUX(7, 4, 1)>, /* ET1_TXD2 */ + <RZG2L_PORT_PINMUX(8, 0, 1)>, /* ET1_TXD3 */ + <RZG2L_PORT_PINMUX(8, 4, 1)>, /* ET1_RXC */ + <RZG2L_PORT_PINMUX(9, 0, 1)>, /* ET1_RX_CTL */ + <RZG2L_PORT_PINMUX(9, 1, 1)>, /* ET1_RXD0 */ + <RZG2L_PORT_PINMUX(9, 2, 1)>, /* ET1_RXD1 */ + <RZG2L_PORT_PINMUX(9, 3, 1)>, /* ET1_RXD2 */ + <RZG2L_PORT_PINMUX(10, 0, 1)>; /* ET1_RXD3 */ + }; + + sdhi0_emmc_pins: sd0emmc { + sd0_emmc_data { + pins = "SD0_DATA0", "SD0_DATA1", "SD0_DATA2", "SD0_DATA3", + "SD0_DATA4", "SD0_DATA5", "SD0_DATA6", "SD0_DATA7"; + power-source = <1800>; + }; + + sd0_emmc_ctrl { + pins = "SD0_CLK", "SD0_CMD"; + power-source = <1800>; + }; + + sd0_emmc_rst { + pins = "SD0_RST#"; + power-source = <1800>; + }; + }; + + sdhi0_pins: sd0 { + sd0_data { + pins = "SD0_DATA0", "SD0_DATA1", "SD0_DATA2", "SD0_DATA3"; + power-source = <3300>; + }; + + sd0_ctrl { + pins = "SD0_CLK", "SD0_CMD"; + power-source = <3300>; + }; + + sd0_mux { + pinmux = <RZG2L_PORT_PINMUX(0, 0, 1)>; /* SD0_CD */ + }; + }; + + sdhi0_pins_uhs: sd0_uhs { + sd0_data_uhs { + pins = "SD0_DATA0", "SD0_DATA1", "SD0_DATA2", "SD0_DATA3"; + power-source = <1800>; + }; + + sd0_ctrl_uhs { + pins = "SD0_CLK", "SD0_CMD"; + power-source = <1800>; + }; + + sd0_mux_uhs { + pinmux = <RZG2L_PORT_PINMUX(0, 0, 1)>; /* SD0_CD */ + }; + }; +}; + +#if (SW_SW0_DEV_SEL) +&sdhi0 { + pinctrl-0 = <&sdhi0_emmc_pins>; + pinctrl-1 = <&sdhi0_emmc_pins>; + pinctrl-names = "default", "state_uhs"; + + vmmc-supply = <®_3p3v>; + vqmmc-supply = <®_1p8v>; + bus-width = <8>; + mmc-hs200-1_8v; + non-removable; + fixed-emmc-driver-type = <1>; + status = "okay"; +}; +#else +&sdhi0 { + pinctrl-0 = <&sdhi0_pins>; + pinctrl-1 = <&sdhi0_pins_uhs>; + pinctrl-names = "default", "state_uhs"; + + vmmc-supply = <®_3p3v>; + vqmmc-supply = <&vccq_sdhi0>; + bus-width = <4>; + sd-uhs-sdr50; + sd-uhs-sdr104; + status = "okay"; +}; +#endif + +&wdt0 { + status = "okay"; + timeout-sec = <60>; +}; + +&wdt2 { + status = "okay"; + timeout-sec = <60>; +}; diff --git a/arch/arm64/boot/dts/renesas/rzg2ul-smarc.dtsi b/arch/arm64/boot/dts/renesas/rzg2ul-smarc.dtsi new file mode 100644 index 000000000000..0051634d7b1c --- /dev/null +++ b/arch/arm64/boot/dts/renesas/rzg2ul-smarc.dtsi @@ -0,0 +1,63 @@ +// SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +/* + * Device Tree Source for the RZ/G2UL Type-1 SMARC EVK parts + * + * Copyright (C) 2022 Renesas Electronics Corp. + */ + +/* + * DIP-Switch SW1 setting + * 1 : High; 0: Low + * SW1-2 : SW_SD0_DEV_SEL (0: uSD; 1: eMMC) + * SW1-3 : SW_ET0_EN_N (0: ETHER0; 1: CAN0, CAN1, SSI1, RSPI1) + * Please change below macros according to SW1 setting + */ +#define SW_SW0_DEV_SEL 1 +#define SW_ET0_EN_N 1 + +#include "rzg2ul-smarc-som.dtsi" +#include "rzg2ul-smarc-pinfunction.dtsi" +#include "rz-smarc-common.dtsi" + +#if (!SW_ET0_EN_N) +&canfd { + /delete-property/ pinctrl-0; + /delete-property/ pinctrl-names; + status = "disabled"; +}; +#endif + +&cpu_dai { + sound-dai = <&ssi1>; +}; + +&i2c1 { + wm8978: codec@1a { + compatible = "wlf,wm8978"; + #sound-dai-cells = <0>; + reg = <0x1a>; + }; +}; + +#if (SW_ET0_EN_N) +&ssi1 { + pinctrl-0 = <&ssi1_pins>; + pinctrl-names = "default"; + + status = "okay"; +}; +#else +&snd_rzg2l { + status = "disabled"; +}; + +&ssi1 { + /delete-property/ pinctrl-0; + /delete-property/ pinctrl-names; + status = "disabled"; +}; +#endif + +&vccq_sdhi1 { + gpios = <&pinctrl RZG2L_GPIO(6, 1) GPIO_ACTIVE_HIGH>; +}; diff --git a/arch/arm64/boot/dts/renesas/salvator-common.dtsi b/arch/arm64/boot/dts/renesas/salvator-common.dtsi index 6092dc4531ad..31837fcd7bf0 100644 --- a/arch/arm64/boot/dts/renesas/salvator-common.dtsi +++ b/arch/arm64/boot/dts/renesas/salvator-common.dtsi @@ -386,7 +386,7 @@ ports { port@0 { - endpoint { + du_out_rgb: endpoint { remote-endpoint = <&adv7123_in>; }; }; @@ -866,6 +866,55 @@ }; }; +&rpc { + /* Left disabled. To be enabled by firmware when unlocked. */ + + flash@0 { + compatible = "cypress,hyperflash", "cfi-flash"; + reg = <0>; + + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + bootparam@0 { + reg = <0x00000000 0x040000>; + read-only; + }; + bl2@40000 { + reg = <0x00040000 0x140000>; + read-only; + }; + cert_header_sa6@180000 { + reg = <0x00180000 0x040000>; + read-only; + }; + bl31@1c0000 { + reg = <0x001c0000 0x040000>; + read-only; + }; + tee@200000 { + reg = <0x00200000 0x440000>; + read-only; + }; + uboot@640000 { + reg = <0x00640000 0x100000>; + read-only; + }; + dtb@740000 { + reg = <0x00740000 0x080000>; + }; + kernel@7c0000 { + reg = <0x007c0000 0x1400000>; + }; + user@1bc0000 { + reg = <0x01bc0000 0x2440000>; + }; + }; + }; +}; + &rwdt { timeout-sec = <60>; status = "okay"; diff --git a/arch/arm64/boot/dts/renesas/ulcb-kf.dtsi b/arch/arm64/boot/dts/renesas/ulcb-kf.dtsi index ae532cd21708..5bcb84403ef6 100644 --- a/arch/arm64/boot/dts/renesas/ulcb-kf.dtsi +++ b/arch/arm64/boot/dts/renesas/ulcb-kf.dtsi @@ -97,8 +97,14 @@ status = "okay"; }; -&du_out_rgb { - remote-endpoint = <&adv7513_in>; +&du { + ports { + port@0 { + du_out_rgb: endpoint { + remote-endpoint = <&adv7513_in>; + }; + }; + }; }; &ehci0 { diff --git a/arch/arm64/boot/dts/renesas/ulcb.dtsi b/arch/arm64/boot/dts/renesas/ulcb.dtsi index b4bdb2d7e4ba..90a4c0629d24 100644 --- a/arch/arm64/boot/dts/renesas/ulcb.dtsi +++ b/arch/arm64/boot/dts/renesas/ulcb.dtsi @@ -426,6 +426,55 @@ }; }; +&rpc { + /* Left disabled. To be enabled by firmware when unlocked. */ + + flash@0 { + compatible = "cypress,hyperflash", "cfi-flash"; + reg = <0>; + + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + bootparam@0 { + reg = <0x00000000 0x040000>; + read-only; + }; + bl2@40000 { + reg = <0x00040000 0x140000>; + read-only; + }; + cert_header_sa6@180000 { + reg = <0x00180000 0x040000>; + read-only; + }; + bl31@1c0000 { + reg = <0x001c0000 0x040000>; + read-only; + }; + tee@200000 { + reg = <0x00200000 0x440000>; + read-only; + }; + uboot@640000 { + reg = <0x00640000 0x100000>; + read-only; + }; + dtb@740000 { + reg = <0x00740000 0x080000>; + }; + kernel@7c0000 { + reg = <0x007c0000 0x1400000>; + }; + user@1bc0000 { + reg = <0x01bc0000 0x2440000>; + }; + }; + }; +}; + &rwdt { timeout-sec = <60>; status = "okay"; diff --git a/arch/arm64/boot/dts/rockchip/Makefile b/arch/arm64/boot/dts/rockchip/Makefile index 4ae9f35434b8..18d00eae3072 100644 --- a/arch/arm64/boot/dts/rockchip/Makefile +++ b/arch/arm64/boot/dts/rockchip/Makefile @@ -59,5 +59,9 @@ dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399pro-rock-pi-n10.dtb dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3566-pinenote-v1.1.dtb dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3566-pinenote-v1.2.dtb dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3566-quartz64-a.dtb -dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3568-evb1-v10.dtb +dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3566-quartz64-b.dtb +dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3566-roc-pc.dtb +dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3566-soquartz-cm4.dtb dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3568-bpi-r2-pro.dtb +dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3568-evb1-v10.dtb +dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3568-rock-3a.dtb diff --git a/arch/arm64/boot/dts/rockchip/rk3328.dtsi b/arch/arm64/boot/dts/rockchip/rk3328.dtsi index b822533dc7f1..49ae15708a0b 100644 --- a/arch/arm64/boot/dts/rockchip/rk3328.dtsi +++ b/arch/arm64/boot/dts/rockchip/rk3328.dtsi @@ -306,6 +306,10 @@ }; power-domain@RK3328_PD_VIDEO { reg = <RK3328_PD_VIDEO>; + clocks = <&cru ACLK_RKVDEC>, + <&cru HCLK_RKVDEC>, + <&cru SCLK_VDEC_CABAC>, + <&cru SCLK_VDEC_CORE>; #power-domain-cells = <0>; }; power-domain@RK3328_PD_VPU { @@ -660,14 +664,28 @@ power-domains = <&power RK3328_PD_VPU>; }; - rkvdec_mmu: iommu@ff360480 { + vdec: video-codec@ff360000 { + compatible = "rockchip,rk3328-vdec", "rockchip,rk3399-vdec"; + reg = <0x0 0xff360000 0x0 0x400>; + interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cru ACLK_RKVDEC>, <&cru HCLK_RKVDEC>, + <&cru SCLK_VDEC_CABAC>, <&cru SCLK_VDEC_CORE>; + clock-names = "axi", "ahb", "cabac", "core"; + assigned-clocks = <&cru ACLK_RKVDEC>, <&cru SCLK_VDEC_CABAC>, + <&cru SCLK_VDEC_CORE>; + assigned-clock-rates = <400000000>, <400000000>, <300000000>; + iommus = <&vdec_mmu>; + power-domains = <&power RK3328_PD_VIDEO>; + }; + + vdec_mmu: iommu@ff360480 { compatible = "rockchip,iommu"; reg = <0x0 0xff360480 0x0 0x40>, <0x0 0xff3604c0 0x0 0x40>; interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>; clocks = <&cru ACLK_RKVDEC>, <&cru HCLK_RKVDEC>; clock-names = "aclk", "iface"; #iommu-cells = <0>; - status = "disabled"; + power-domains = <&power RK3328_PD_VIDEO>; }; vop: vop@ff370000 { diff --git a/arch/arm64/boot/dts/rockchip/rk3399-firefly.dts b/arch/arm64/boot/dts/rockchip/rk3399-firefly.dts index c654b6b02f3f..b340c9e246c4 100644 --- a/arch/arm64/boot/dts/rockchip/rk3399-firefly.dts +++ b/arch/arm64/boot/dts/rockchip/rk3399-firefly.dts @@ -5,6 +5,7 @@ /dts-v1/; #include <dt-bindings/input/linux-event-codes.h> +#include <dt-bindings/interrupt-controller/irq.h> #include <dt-bindings/pwm/pwm.h> #include <dt-bindings/usb/pd.h> #include "rk3399.dtsi" @@ -786,7 +787,7 @@ reg = <1>; compatible = "brcm,bcm4329-fmac"; interrupt-parent = <&gpio0>; - interrupts = <RK_PA3 GPIO_ACTIVE_HIGH>; + interrupts = <RK_PA3 IRQ_TYPE_LEVEL_HIGH>; interrupt-names = "host-wake"; brcm,drive-strength = <5>; pinctrl-names = "default"; diff --git a/arch/arm64/boot/dts/rockchip/rk3399-gru-chromebook.dtsi b/arch/arm64/boot/dts/rockchip/rk3399-gru-chromebook.dtsi index 3355fb90fa54..50d459ee4831 100644 --- a/arch/arm64/boot/dts/rockchip/rk3399-gru-chromebook.dtsi +++ b/arch/arm64/boot/dts/rockchip/rk3399-gru-chromebook.dtsi @@ -234,6 +234,13 @@ extcon = <&usbc_extcon0>, <&usbc_extcon1>; }; +&dmc { + center-supply = <&ppvar_centerlogic>; + rockchip,pd-idle-dis-freq-hz = <800000000>; + rockchip,sr-idle-dis-freq-hz = <800000000>; + rockchip,sr-mc-gate-idle-dis-freq-hz = <800000000>; +}; + &edp { status = "okay"; diff --git a/arch/arm64/boot/dts/rockchip/rk3399-gru-scarlet.dtsi b/arch/arm64/boot/dts/rockchip/rk3399-gru-scarlet.dtsi index a9817b3d7edc..913d845eb51a 100644 --- a/arch/arm64/boot/dts/rockchip/rk3399-gru-scarlet.dtsi +++ b/arch/arm64/boot/dts/rockchip/rk3399-gru-scarlet.dtsi @@ -391,6 +391,18 @@ camera: &i2c7 { <400000000>; }; +/* The center supply is fixed to .9V on scarlet */ +&dmc { + center-supply = <&pp900_s0>; +}; + +/* We don't need .925 V for 928 MHz on scarlet */ +&dmc_opp_table { + opp03 { + opp-microvolt = <900000>; + }; +}; + &gpio0 { gpio-line-names = /* GPIO0 A 0-7 */ "CLK_32K_AP", diff --git a/arch/arm64/boot/dts/rockchip/rk3399-gru.dtsi b/arch/arm64/boot/dts/rockchip/rk3399-gru.dtsi index 162f08bca0d4..23bfba86daab 100644 --- a/arch/arm64/boot/dts/rockchip/rk3399-gru.dtsi +++ b/arch/arm64/boot/dts/rockchip/rk3399-gru.dtsi @@ -373,6 +373,34 @@ <200000000>; }; +&dfi { + status = "okay"; +}; + +&dmc { + status = "okay"; + + rockchip,pd-idle-ns = <160>; + rockchip,sr-idle-ns = <10240>; + rockchip,sr-mc-gate-idle-ns = <40960>; + rockchip,srpd-lite-idle-ns = <61440>; + rockchip,standby-idle-ns = <81920>; + + rockchip,ddr3_odt_dis_freq = <666000000>; + rockchip,lpddr3_odt_dis_freq = <666000000>; + rockchip,lpddr4_odt_dis_freq = <666000000>; + + rockchip,sr-mc-gate-idle-dis-freq-hz = <1000000000>; + rockchip,srpd-lite-idle-dis-freq-hz = <0>; + rockchip,standby-idle-dis-freq-hz = <928000000>; +}; + +&dmc_opp_table { + opp03 { + opp-suspend; + }; +}; + &emmc_phy { status = "okay"; }; diff --git a/arch/arm64/boot/dts/rockchip/rk3399-hugsun-x99.dts b/arch/arm64/boot/dts/rockchip/rk3399-hugsun-x99.dts index bee45c17e2ca..7af27e8216f1 100644 --- a/arch/arm64/boot/dts/rockchip/rk3399-hugsun-x99.dts +++ b/arch/arm64/boot/dts/rockchip/rk3399-hugsun-x99.dts @@ -2,6 +2,7 @@ /dts-v1/; #include <dt-bindings/pwm/pwm.h> #include <dt-bindings/input/input.h> +#include <dt-bindings/interrupt-controller/irq.h> #include "rk3399.dtsi" #include "rk3399-opp.dtsi" @@ -629,7 +630,7 @@ compatible = "brcm,bcm4329-fmac"; reg = <1>; interrupt-parent = <&gpio0>; - interrupts = <RK_PA3 GPIO_ACTIVE_HIGH>; + interrupts = <RK_PA3 IRQ_TYPE_LEVEL_HIGH>; interrupt-names = "host-wake"; pinctrl-names = "default"; pinctrl-0 = <&wifi_host_wake_l>; diff --git a/arch/arm64/boot/dts/rockchip/rk3399-khadas-edge.dtsi b/arch/arm64/boot/dts/rockchip/rk3399-khadas-edge.dtsi index 7ba3ed24084b..46c4581deb8d 100644 --- a/arch/arm64/boot/dts/rockchip/rk3399-khadas-edge.dtsi +++ b/arch/arm64/boot/dts/rockchip/rk3399-khadas-edge.dtsi @@ -6,6 +6,7 @@ /dts-v1/; #include <dt-bindings/input/linux-event-codes.h> +#include <dt-bindings/interrupt-controller/irq.h> #include <dt-bindings/pwm/pwm.h> #include "rk3399.dtsi" #include "rk3399-opp.dtsi" @@ -682,7 +683,7 @@ reg = <1>; compatible = "brcm,bcm4329-fmac"; interrupt-parent = <&gpio0>; - interrupts = <RK_PA3 GPIO_ACTIVE_HIGH>; + interrupts = <RK_PA3 IRQ_TYPE_LEVEL_HIGH>; interrupt-names = "host-wake"; brcm,drive-strength = <5>; pinctrl-names = "default"; diff --git a/arch/arm64/boot/dts/rockchip/rk3399-leez-p710.dts b/arch/arm64/boot/dts/rockchip/rk3399-leez-p710.dts index 5bbe74bed0ea..a21ac319f809 100644 --- a/arch/arm64/boot/dts/rockchip/rk3399-leez-p710.dts +++ b/arch/arm64/boot/dts/rockchip/rk3399-leez-p710.dts @@ -5,6 +5,7 @@ /dts-v1/; #include <dt-bindings/input/linux-event-codes.h> +#include <dt-bindings/interrupt-controller/irq.h> #include <dt-bindings/pwm/pwm.h> #include "rk3399.dtsi" #include "rk3399-opp.dtsi" @@ -509,7 +510,7 @@ compatible = "brcm,bcm4329-fmac"; reg = <1>; interrupt-parent = <&gpio0>; - interrupts = <RK_PA3 GPIO_ACTIVE_HIGH>; + interrupts = <RK_PA3 IRQ_TYPE_LEVEL_HIGH>; interrupt-names = "host-wake"; pinctrl-names = "default"; pinctrl-0 = <&wifi_host_wake_l>; diff --git a/arch/arm64/boot/dts/rockchip/rk3399-nanopi4.dtsi b/arch/arm64/boot/dts/rockchip/rk3399-nanopi4.dtsi index 8c0ff6c96e03..248ad41a976b 100644 --- a/arch/arm64/boot/dts/rockchip/rk3399-nanopi4.dtsi +++ b/arch/arm64/boot/dts/rockchip/rk3399-nanopi4.dtsi @@ -267,7 +267,7 @@ interrupt-parent = <&gpio1>; interrupts = <21 IRQ_TYPE_LEVEL_LOW>; pinctrl-names = "default"; - pinctrl-0 = <&pmic_int_l>; + pinctrl-0 = <&pmic_int_l>, <&ap_pwroff>, <&clk_32k>; rockchip,system-power-controller; wakeup-source; diff --git a/arch/arm64/boot/dts/rockchip/rk3399-op1-opp.dtsi b/arch/arm64/boot/dts/rockchip/rk3399-op1-opp.dtsi index 2180e0f75003..6e29e74f6fc6 100644 --- a/arch/arm64/boot/dts/rockchip/rk3399-op1-opp.dtsi +++ b/arch/arm64/boot/dts/rockchip/rk3399-op1-opp.dtsi @@ -110,6 +110,27 @@ opp-microvolt = <1075000>; }; }; + + dmc_opp_table: dmc_opp_table { + compatible = "operating-points-v2"; + + opp00 { + opp-hz = /bits/ 64 <400000000>; + opp-microvolt = <900000>; + }; + opp01 { + opp-hz = /bits/ 64 <666000000>; + opp-microvolt = <900000>; + }; + opp02 { + opp-hz = /bits/ 64 <800000000>; + opp-microvolt = <900000>; + }; + opp03 { + opp-hz = /bits/ 64 <928000000>; + opp-microvolt = <925000>; + }; + }; }; &cpu_l0 { @@ -136,6 +157,10 @@ operating-points-v2 = <&cluster1_opp>; }; +&dmc { + operating-points-v2 = <&dmc_opp_table>; +}; + &gpu { operating-points-v2 = <&gpu_opp_table>; }; diff --git a/arch/arm64/boot/dts/rockchip/rk3399-orangepi.dts b/arch/arm64/boot/dts/rockchip/rk3399-orangepi.dts index 9d3a718f66f6..ed856bfcfc33 100644 --- a/arch/arm64/boot/dts/rockchip/rk3399-orangepi.dts +++ b/arch/arm64/boot/dts/rockchip/rk3399-orangepi.dts @@ -7,6 +7,7 @@ #include "dt-bindings/pwm/pwm.h" #include "dt-bindings/input/input.h" +#include <dt-bindings/interrupt-controller/irq.h> #include "dt-bindings/usb/pd.h" #include "rk3399.dtsi" #include "rk3399-opp.dtsi" @@ -735,7 +736,7 @@ reg = <1>; compatible = "brcm,bcm4329-fmac"; interrupt-parent = <&gpio0>; - interrupts = <RK_PA3 GPIO_ACTIVE_HIGH>; + interrupts = <RK_PA3 IRQ_TYPE_LEVEL_HIGH>; interrupt-names = "host-wake"; pinctrl-names = "default"; pinctrl-0 = <&wifi_host_wake_l>; diff --git a/arch/arm64/boot/dts/rockchip/rk3399-rock-pi-4b.dts b/arch/arm64/boot/dts/rockchip/rk3399-rock-pi-4b.dts index cf48746a3ad8..0806545922f5 100644 --- a/arch/arm64/boot/dts/rockchip/rk3399-rock-pi-4b.dts +++ b/arch/arm64/boot/dts/rockchip/rk3399-rock-pi-4b.dts @@ -23,7 +23,7 @@ compatible = "brcm,bcm4329-fmac"; reg = <1>; interrupt-parent = <&gpio0>; - interrupts = <RK_PA3 GPIO_ACTIVE_HIGH>; + interrupts = <RK_PA3 IRQ_TYPE_LEVEL_HIGH>; interrupt-names = "host-wake"; pinctrl-names = "default"; pinctrl-0 = <&wifi_host_wake_l>; diff --git a/arch/arm64/boot/dts/rockchip/rk3399-rock-pi-4c.dts b/arch/arm64/boot/dts/rockchip/rk3399-rock-pi-4c.dts index 793d84833921..4053ba72618c 100644 --- a/arch/arm64/boot/dts/rockchip/rk3399-rock-pi-4c.dts +++ b/arch/arm64/boot/dts/rockchip/rk3399-rock-pi-4c.dts @@ -31,7 +31,7 @@ compatible = "brcm,bcm4329-fmac"; reg = <1>; interrupt-parent = <&gpio0>; - interrupts = <RK_PA3 GPIO_ACTIVE_HIGH>; + interrupts = <RK_PA3 IRQ_TYPE_LEVEL_HIGH>; interrupt-names = "host-wake"; pinctrl-names = "default"; pinctrl-0 = <&wifi_host_wake_l>; diff --git a/arch/arm64/boot/dts/rockchip/rk3399-rock960.dtsi b/arch/arm64/boot/dts/rockchip/rk3399-rock960.dtsi index 25dc61c26a94..94e39ed63397 100644 --- a/arch/arm64/boot/dts/rockchip/rk3399-rock960.dtsi +++ b/arch/arm64/boot/dts/rockchip/rk3399-rock960.dtsi @@ -7,6 +7,7 @@ #include "rk3399.dtsi" #include "rk3399-opp.dtsi" +#include <dt-bindings/interrupt-controller/irq.h> / { aliases { @@ -528,7 +529,7 @@ compatible = "brcm,bcm4329-fmac"; reg = <1>; interrupt-parent = <&gpio0>; - interrupts = <RK_PA3 GPIO_ACTIVE_HIGH>; + interrupts = <RK_PA3 IRQ_TYPE_LEVEL_HIGH>; interrupt-names = "host-wake"; pinctrl-names = "default"; pinctrl-0 = <&wifi_host_wake_l>; diff --git a/arch/arm64/boot/dts/rockchip/rk3399.dtsi b/arch/arm64/boot/dts/rockchip/rk3399.dtsi index 080457a68e3c..fbd0346624e6 100644 --- a/arch/arm64/boot/dts/rockchip/rk3399.dtsi +++ b/arch/arm64/boot/dts/rockchip/rk3399.dtsi @@ -178,6 +178,15 @@ ports = <&vopl_out>, <&vopb_out>; }; + dmc: memory-controller { + compatible = "rockchip,rk3399-dmc"; + rockchip,pmu = <&pmugrf>; + devfreq-events = <&dfi>; + clocks = <&cru SCLK_DDRC>; + clock-names = "dmc_clk"; + status = "disabled"; + }; + pmu_a53 { compatible = "arm,cortex-a53-pmu"; interrupts = <GIC_PPI 7 IRQ_TYPE_LEVEL_LOW &ppi_cluster0>; @@ -1295,6 +1304,16 @@ status = "disabled"; }; + dfi: dfi@ff630000 { + reg = <0x00 0xff630000 0x00 0x4000>; + compatible = "rockchip,rk3399-dfi"; + rockchip,pmu = <&pmugrf>; + interrupts = <GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH 0>; + clocks = <&cru PCLK_DDR_MON>; + clock-names = "pclk_ddr_mon"; + status = "disabled"; + }; + vpu: video-codec@ff650000 { compatible = "rockchip,rk3399-vpu"; reg = <0x0 0xff650000 0x0 0x800>; @@ -1413,9 +1432,11 @@ clock-names = "apb_pclk"; }; - pmucru: pmu-clock-controller@ff750000 { + pmucru: clock-controller@ff750000 { compatible = "rockchip,rk3399-pmucru"; reg = <0x0 0xff750000 0x0 0x1000>; + clocks = <&xin24m>; + clock-names = "xin24m"; rockchip,grf = <&pmugrf>; #clock-cells = <1>; #reset-cells = <1>; @@ -1426,6 +1447,8 @@ cru: clock-controller@ff760000 { compatible = "rockchip,rk3399-cru"; reg = <0x0 0xff760000 0x0 0x1000>; + clocks = <&xin24m>; + clock-names = "xin24m"; rockchip,grf = <&grf>; #clock-cells = <1>; #reset-cells = <1>; @@ -1534,6 +1557,7 @@ reg = <0xf780 0x24>; clocks = <&sdhci>; clock-names = "emmcclk"; + drive-impedance-ohm = <50>; #phy-cells = <0>; status = "disabled"; }; @@ -1544,7 +1568,6 @@ clock-names = "refclk"; #phy-cells = <1>; resets = <&cru SRST_PCIEPHY>; - drive-impedance-ohm = <50>; reset-names = "phy"; status = "disabled"; }; @@ -1884,7 +1907,7 @@ <&cru SCLK_HDMI_CEC>, <&cru PCLK_VIO_GRF>, <&cru PLL_VPLL>; - clock-names = "iahb", "isfr", "cec", "grf", "vpll"; + clock-names = "iahb", "isfr", "cec", "grf", "ref"; power-domains = <&power RK3399_PD_HDCP>; reg-io-width = <4>; rockchip,grf = <&grf>; @@ -2188,6 +2211,22 @@ output-low; }; + pcfg_input_enable: pcfg-input-enable { + input-enable; + }; + + pcfg_input_pull_up: pcfg-input-pull-up { + input-enable; + bias-pull-up; + drive-strength = <2>; + }; + + pcfg_input_pull_down: pcfg-input-pull-down { + input-enable; + bias-pull-down; + drive-strength = <2>; + }; + clock { clk_32k: clk-32k { rockchip,pins = <0 RK_PA0 2 &pcfg_pull_none>; diff --git a/arch/arm64/boot/dts/rockchip/rk3566-pinenote.dtsi b/arch/arm64/boot/dts/rockchip/rk3566-pinenote.dtsi index fea748adfa90..e01668e6e5f9 100644 --- a/arch/arm64/boot/dts/rockchip/rk3566-pinenote.dtsi +++ b/arch/arm64/boot/dts/rockchip/rk3566-pinenote.dtsi @@ -466,6 +466,55 @@ default-brightness = <0>; }; }; + + wusb3801: tcpc@60 { + compatible = "willsemi,wusb3801"; + reg = <0x60>; + interrupt-parent = <&gpio0>; + interrupts = <RK_PA4 IRQ_TYPE_LEVEL_LOW>; + pinctrl-0 = <&tcpc_int_l>; + pinctrl-names = "default"; + + connector { + compatible = "usb-c-connector"; + label = "USB-C"; + vbus-supply = <&otg_switch>; + power-role = "dual"; + try-power-role = "sink"; + data-role = "dual"; + typec-power-opmode = "default"; + pd-disable; + + ports { + #address-cells = <0x1>; + #size-cells = <0x0>; + + port@0 { + reg = <0x0>; + + typec_hs_usb2phy0: endpoint { + remote-endpoint = <&usb2phy0_typec_hs>; + }; + }; + }; + }; + }; +}; + +&i2c5 { + status = "okay"; + + accelerometer@18 { + compatible = "silan,sc7a20"; + reg = <0x18>; + interrupt-parent = <&gpio3>; + interrupts = <RK_PB2 IRQ_TYPE_LEVEL_LOW>; + pinctrl-0 = <&accelerometer_int_l>; + pinctrl-names = "default"; + st,drdy-int-pin = <1>; + vdd-supply = <&vcc_3v3>; + vddio-supply = <&vcc_3v3>; + }; }; &i2s1_8ch { @@ -482,6 +531,12 @@ }; &pinctrl { + accelerometer { + accelerometer_int_l: accelerometer-int-l { + rockchip,pins = <3 RK_PB2 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; + audio-amplifier { spk_amp_enable_h: spk-amp-enable-h { rockchip,pins = <3 RK_PC4 RK_FUNC_GPIO &pcfg_pull_none>; @@ -550,6 +605,12 @@ }; }; + tcpc { + tcpc_int_l: tcpc-int-l { + rockchip,pins = <0 RK_PA4 RK_FUNC_GPIO &pcfg_pull_up>; + }; + }; + vcc-wl { vcc_wl_pin: vcc-wl-pin { rockchip,pins = <0 RK_PA0 RK_FUNC_GPIO &pcfg_pull_none>; @@ -637,3 +698,22 @@ &uart2 { status = "okay"; }; + +&usb_host0_xhci { + dr_mode = "otg"; + status = "okay"; +}; + +&usb2phy0 { + status = "okay"; +}; + +&usb2phy0_otg { + status = "okay"; + + port { + usb2phy0_typec_hs: endpoint { + remote-endpoint = <&typec_hs_usb2phy0>; + }; + }; +}; diff --git a/arch/arm64/boot/dts/rockchip/rk3566-quartz64-a.dts b/arch/arm64/boot/dts/rockchip/rk3566-quartz64-a.dts index dd7f4b9b686b..141a433429b5 100644 --- a/arch/arm64/boot/dts/rockchip/rk3566-quartz64-a.dts +++ b/arch/arm64/boot/dts/rockchip/rk3566-quartz64-a.dts @@ -151,6 +151,16 @@ vin-supply = <&vcc5v0_usb>; }; + vcc5v0_usb20_otg: vcc5v0_usb20_otg { + compatible = "regulator-fixed"; + enable-active-high; + gpio = <&gpio4 RK_PB5 GPIO_ACTIVE_HIGH>; + regulator-name = "vcc5v0_usb20_otg"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + vin-supply = <&dcdc_boost>; + }; + vcc3v3_sd: vcc3v3_sd { compatible = "regulator-fixed"; enable-active-low; @@ -187,6 +197,10 @@ }; }; +&combphy1 { + status = "okay"; +}; + &cpu0 { cpu-supply = <&vdd_cpu>; }; @@ -672,6 +686,29 @@ status = "okay"; }; +&usb_host0_xhci { + status = "okay"; +}; + +/* usb3 controller is muxed with sata1 */ +&usb_host1_xhci { + status = "okay"; +}; + +&usb2phy0 { + status = "okay"; +}; + +&usb2phy0_host { + phy-supply = <&vcc5v0_usb20_host>; + status = "okay"; +}; + +&usb2phy0_otg { + phy-supply = <&vcc5v0_usb20_otg>; + status = "okay"; +}; + &usb2phy1 { status = "okay"; }; diff --git a/arch/arm64/boot/dts/rockchip/rk3566-quartz64-b.dts b/arch/arm64/boot/dts/rockchip/rk3566-quartz64-b.dts new file mode 100644 index 000000000000..7bdcecc0dfe4 --- /dev/null +++ b/arch/arm64/boot/dts/rockchip/rk3566-quartz64-b.dts @@ -0,0 +1,615 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) + +/dts-v1/; + +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/pinctrl/rockchip.h> +#include "rk3566.dtsi" + +/ { + model = "Pine64 RK3566 Quartz64-B Board"; + compatible = "pine64,quartz64-b", "rockchip,rk3566"; + + aliases { + ethernet0 = &gmac1; + mmc0 = &sdmmc0; + mmc1 = &sdhci; + mmc2 = &sdmmc1; + }; + + chosen: chosen { + stdout-path = "serial2:1500000n8"; + }; + + gmac1_clkin: external-gmac1-clock { + compatible = "fixed-clock"; + clock-frequency = <125000000>; + clock-output-names = "gmac1_clkin"; + #clock-cells = <0>; + }; + + leds { + compatible = "gpio-leds"; + + led-user { + label = "user-led"; + default-state = "on"; + gpios = <&gpio0 RK_PA0 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "heartbeat"; + pinctrl-names = "default"; + pinctrl-0 = <&user_led_enable_h>; + retain-state-suspended; + }; + }; + + sdio_pwrseq: sdio-pwrseq { + status = "okay"; + compatible = "mmc-pwrseq-simple"; + clocks = <&rk809 1>; + clock-names = "ext_clock"; + pinctrl-names = "default"; + pinctrl-0 = <&wifi_enable_h>; + reset-gpios = <&gpio0 RK_PC0 GPIO_ACTIVE_LOW>; + post-power-on-delay-ms = <100>; + power-off-delay-us = <5000000>; + }; + + vcc5v0_in: vcc5v0-in-regulator { + compatible = "regulator-fixed"; + regulator-name = "vcc5v0_in"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + }; + + vcc5v0_sys: vcc5v0-sys-regulator { + compatible = "regulator-fixed"; + regulator-name = "vcc5v0_sys"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + vin-supply = <&vcc5v0_in>; + }; + + vcc3v3_sys: vcc3v3-sys-regulator { + compatible = "regulator-fixed"; + regulator-name = "vcc3v3_sys"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + vin-supply = <&vcc5v0_sys>; + }; + + vcc5v0_usb30_host: vcc5v0-usb30-host-regulator { + compatible = "regulator-fixed"; + regulator-name = "vcc5v0_usb30_host"; + enable-active-high; + gpio = <&gpio0 RK_PC5 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&vcc5v0_usb30_host_en_h>; + regulator-always-on; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + vin-supply = <&vcc5v0_sys>; + }; + + vcc5v0_usb_otg: vcc5v0-usb-otg-regulator { + compatible = "regulator-fixed"; + regulator-name = "vcc5v0_usb_otg"; + enable-active-high; + gpio = <&gpio0 RK_PC6 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&vcc5v0_usb_otg_en_h>; + regulator-always-on; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + vin-supply = <&vcc5v0_sys>; + }; +}; + +&combphy1 { + status = "okay"; +}; + +&cpu0 { + cpu-supply = <&vdd_cpu>; +}; + +&cpu1 { + cpu-supply = <&vdd_cpu>; +}; + +&cpu2 { + cpu-supply = <&vdd_cpu>; +}; + +&cpu3 { + cpu-supply = <&vdd_cpu>; +}; + +&gmac1 { + assigned-clocks = <&cru SCLK_GMAC1_RX_TX>, <&cru SCLK_GMAC1_RGMII_SPEED>, <&cru SCLK_GMAC1>; + assigned-clock-parents = <&cru SCLK_GMAC1_RGMII_SPEED>, <&cru SCLK_GMAC1>, <&gmac1_clkin>; + clock_in_out = "input"; + phy-mode = "rgmii-id"; + phy-supply = <&vcc_3v3>; + pinctrl-names = "default"; + pinctrl-0 = <&gmac1m1_miim + &gmac1m1_tx_bus2 + &gmac1m1_rx_bus2 + &gmac1m1_rgmii_clk + &gmac1m1_clkinout + &gmac1m1_rgmii_bus>; + snps,reset-gpio = <&gpio3 RK_PC0 GPIO_ACTIVE_LOW>; + snps,reset-active-low; + /* Reset time is 20ms, 100ms for rtl8211f, also works well here */ + snps,reset-delays-us = <0 20000 100000>; + tx_delay = <0x4f>; + rx_delay = <0x24>; + phy-handle = <&rgmii_phy1>; + status = "okay"; +}; + +&i2c0 { + status = "okay"; + + vdd_cpu: regulator@1c { + compatible = "tcs,tcs4525"; + reg = <0x1c>; + fcs,suspend-voltage-selector = <1>; + regulator-name = "vdd_cpu"; + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <1150000>; + regulator-ramp-delay = <2300>; + regulator-always-on; + regulator-boot-on; + vin-supply = <&vcc5v0_sys>; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + rk809: pmic@20 { + compatible = "rockchip,rk809"; + reg = <0x20>; + interrupt-parent = <&gpio0>; + interrupts = <RK_PA7 IRQ_TYPE_LEVEL_LOW>; + clock-output-names = "rk808-clkout1", "rk808-clkout2"; + + pinctrl-names = "default"; + pinctrl-0 = <&pmic_int>; + rockchip,system-power-controller; + wakeup-source; + #clock-cells = <1>; + + vcc1-supply = <&vcc3v3_sys>; + vcc2-supply = <&vcc3v3_sys>; + vcc3-supply = <&vcc3v3_sys>; + vcc4-supply = <&vcc3v3_sys>; + vcc5-supply = <&vcc3v3_sys>; + vcc6-supply = <&vcc3v3_sys>; + vcc7-supply = <&vcc3v3_sys>; + vcc8-supply = <&vcc3v3_sys>; + vcc9-supply = <&vcc3v3_sys>; + + regulators { + vdd_log: DCDC_REG1 { + regulator-name = "vdd_log"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <500000>; + regulator-max-microvolt = <1350000>; + regulator-init-microvolt = <900000>; + regulator-ramp-delay = <6001>; + + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <900000>; + }; + }; + + vdd_gpu: DCDC_REG2 { + regulator-name = "vdd_gpu"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <900000>; + regulator-max-microvolt = <1350000>; + regulator-init-microvolt = <900000>; + regulator-ramp-delay = <6001>; + + regulator-state-mem { + regulator-off-in-suspend; + regulator-suspend-microvolt = <900000>; + }; + }; + + vcc_ddr: DCDC_REG3 { + regulator-name = "vcc_ddr"; + regulator-always-on; + regulator-boot-on; + regulator-initial-mode = <0x2>; + regulator-state-mem { + regulator-on-in-suspend; + }; + }; + + vdd_npu: DCDC_REG4 { + regulator-name = "vdd_npu"; + regulator-min-microvolt = <900000>; + regulator-max-microvolt = <1350000>; + regulator-initial-mode = <0x2>; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vcc_1v8: DCDC_REG5 { + regulator-name = "vcc_1v8"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <1800000>; + }; + }; + + vdda0v9_image: LDO_REG1 { + regulator-name = "vdda0v9_image"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <900000>; + regulator-max-microvolt = <900000>; + + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <900000>; + }; + }; + + vdda_0v9: LDO_REG2 { + regulator-name = "vdda_0v9"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <900000>; + regulator-max-microvolt = <900000>; + + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <900000>; + }; + }; + + vdda0v9_pmu: LDO_REG3 { + regulator-name = "vdda0v9_pmu"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <900000>; + regulator-max-microvolt = <900000>; + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <900000>; + }; + }; + + vccio_acodec: LDO_REG4 { + regulator-name = "vccio_acodec"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <3300000>; + + }; + }; + + vccio_sd: LDO_REG5 { + regulator-name = "vccio_sd"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <3300000>; + }; + }; + + vcc3v3_pmu: LDO_REG6 { + regulator-name = "vcc3v3_pmu"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <3300000>; + }; + }; + + vcca_1v8: LDO_REG7 { + regulator-name = "vcca_1v8"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <1800000>; + }; + }; + + vcca1v8_pmu: LDO_REG8 { + regulator-name = "vcca1v8_pmu"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <1800000>; + }; + }; + + vcca1v8_image: LDO_REG9 { + regulator-name = "vcca1v8_image"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <1800000>; + }; + }; + + vcc_3v3: SWITCH_REG1 { + regulator-boot-on; + regulator-name = "vcc_3v3"; + }; + + vcc3v3_sd: SWITCH_REG2 { + regulator-name = "vcc3v3_sd"; + }; + }; + }; +}; + +/* i2c2_m1 exposed on csi port, pulled up to vcc_3v3 */ +&i2c2 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c2m1_xfer>; + status = "okay"; +}; + +/* i2c3_m1 exposed on dsi port, pulled up to vcc_3v3 */ +&i2c3 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c3m1_xfer>; + status = "okay"; +}; + +/* + * i2c4_m0 is exposed on PI40, pulled up to vcc_3v3 + * pin 27 - i2c4_sda_m0 + * pin 28 - i2c4_scl_m0 + */ +&i2c4 { + status = "okay"; +}; + +/* + * i2c5_m0 is exposed on PI40 + * pin 29 - i2c5_scl_m0 + * pin 31 - i2c5_sda_m0 + */ +&i2c5 { + status = "disabled"; +}; + +&mdio1 { + rgmii_phy1: ethernet-phy@1 { + compatible = "ethernet-phy-ieee802.3-c22"; + reg = <0x1>; + }; +}; + +&pinctrl { + bt { + bt_enable_h: bt-enable-h { + rockchip,pins = <0 RK_PC1 RK_FUNC_GPIO &pcfg_pull_none>; + }; + + bt_host_wake_l: bt-host-wake-l { + rockchip,pins = <0 RK_PB3 RK_FUNC_GPIO &pcfg_pull_down>; + }; + + bt_wake_l: bt-wake-l { + rockchip,pins = <0 RK_PB4 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; + + leds { + user_led_enable_h: user-led-enable-h { + rockchip,pins = <0 RK_PA0 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; + + pmic { + pmic_int: pmic_int { + rockchip,pins = + <0 RK_PA3 RK_FUNC_GPIO &pcfg_pull_up>; + }; + }; + + sdio-pwrseq { + wifi_enable_h: wifi-enable-h { + rockchip,pins = <0 RK_PC0 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; + + usb { + vcc5v0_usb30_host_en_h: vcc5v0-usb30-host-en_h { + rockchip,pins = <0 RK_PC5 RK_FUNC_GPIO &pcfg_pull_none>; + }; + + vcc5v0_usb_otg_en_h: vcc5v0-usb-otg-en_h { + rockchip,pins = <0 RK_PC6 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; +}; + +&pmu_io_domains { + status = "okay"; + pmuio1-supply = <&vcc3v3_pmu>; + pmuio2-supply = <&vcca1v8_pmu>; + vccio1-supply = <&vccio_acodec>; + vccio2-supply = <&vcc_1v8>; + vccio3-supply = <&vccio_sd>; + vccio4-supply = <&vcca1v8_pmu>; + vccio5-supply = <&vcc_3v3>; + vccio6-supply = <&vcc_3v3>; + vccio7-supply = <&vcc_3v3>; +}; + +&saradc { + vref-supply = <&vcca_1v8>; + status = "okay"; +}; + +&sdhci { + bus-width = <8>; + mmc-hs200-1_8v; + non-removable; + vmmc-supply = <&vcc_3v3>; + vqmmc-supply = <&vcc_1v8>; + status = "okay"; +}; + +&sdmmc0 { + bus-width = <4>; + cap-sd-highspeed; + cd-gpios = <&gpio0 RK_PA4 GPIO_ACTIVE_LOW>; + disable-wp; + pinctrl-names = "default"; + pinctrl-0 = <&sdmmc0_bus4 &sdmmc0_clk &sdmmc0_cmd &sdmmc0_det>; + sd-uhs-sdr104; + vmmc-supply = <&vcc3v3_sd>; + vqmmc-supply = <&vccio_sd>; + status = "okay"; +}; + +&sdmmc1 { + bus-width = <4>; + cap-sd-highspeed; + cap-sdio-irq; + keep-power-in-suspend; + mmc-pwrseq = <&sdio_pwrseq>; + non-removable; + pinctrl-names = "default"; + pinctrl-0 = <&sdmmc1_bus4 &sdmmc1_cmd &sdmmc1_clk>; + vmmc-supply = <&vcc3v3_sys>; + vqmmc-supply = <&vcca1v8_pmu>; + status = "okay"; +}; + +&sfc { + pinctrl-0 = <&fspi_pins>; + pinctrl-names = "default"; + #address-cells = <1>; + #size-cells = <0>; + status = "okay"; + + flash@0 { + compatible = "jedec,spi-nor"; + reg = <0>; + spi-max-frequency = <24000000>; + spi-rx-bus-width = <4>; + spi-tx-bus-width = <1>; + }; +}; + +&tsadc { + status = "okay"; +}; + +&uart1 { + pinctrl-names = "default"; + pinctrl-0 = <&uart1m0_xfer &uart1m0_ctsn &uart1m0_rtsn>; + status = "okay"; + uart-has-rtscts; + + bluetooth { + compatible = "brcm,bcm4345c5"; + clocks = <&rk809 1>; + clock-names = "lpo"; + device-wakeup-gpios = <&gpio0 RK_PB4 GPIO_ACTIVE_HIGH>; + host-wakeup-gpios = <&gpio0 RK_PB3 GPIO_ACTIVE_HIGH>; + shutdown-gpios = <&gpio0 RK_PC1 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&bt_host_wake_l &bt_wake_l &bt_enable_h>; + vbat-supply = <&vcc3v3_sys>; + vddio-supply = <&vcca1v8_pmu>; + }; +}; + +/* + * uart2_m0 is exposed on PI40 + * pin 8 - uart2_tx_m0 + * pin 10 - uart2_rx_m0 + */ +&uart2 { + status = "okay"; +}; + +&usb2phy0_host { + phy-supply = <&vcc5v0_usb30_host>; + status = "okay"; +}; + +&usb2phy0_otg { + phy-supply = <&vcc5v0_usb_otg>; + status = "okay"; +}; + +&usb2phy1_otg { + phy-supply = <&vcc5v0_usb30_host>; + status = "okay"; +}; + +&usb2phy0 { + status = "okay"; +}; + +&usb2phy1 { + status = "okay"; +}; + +&usb_host0_xhci { + status = "okay"; +}; + +&usb_host1_xhci { + status = "okay"; +}; + +&usb_host0_ehci { + status = "okay"; +}; + +&usb_host0_ohci { + status = "okay"; +}; diff --git a/arch/arm64/boot/dts/rockchip/rk3566-roc-pc.dts b/arch/arm64/boot/dts/rockchip/rk3566-roc-pc.dts new file mode 100644 index 000000000000..57759b66d44d --- /dev/null +++ b/arch/arm64/boot/dts/rockchip/rk3566-roc-pc.dts @@ -0,0 +1,579 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) + +/dts-v1/; + +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/pinctrl/rockchip.h> +#include "rk3566.dtsi" + +/ { + model = "Firefly Station M2"; + compatible = "firefly,rk3566-roc-pc", "rockchip,rk3566"; + + aliases { + mmc0 = &sdmmc0; + mmc1 = &sdhci; + mmc2 = &sdmmc1; + }; + + chosen: chosen { + stdout-path = "serial2:1500000n8"; + }; + + gmac1_clkin: external-gmac1-clock { + compatible = "fixed-clock"; + clock-frequency = <125000000>; + clock-output-names = "gmac1_clkin"; + #clock-cells = <0>; + }; + + leds { + compatible = "gpio-leds"; + + led-user { + label = "user-led"; + default-state = "on"; + gpios = <&gpio0 RK_PD3 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "heartbeat"; + pinctrl-names = "default"; + pinctrl-0 = <&user_led_enable_h>; + retain-state-suspended; + }; + }; + + sdio_pwrseq: sdio-pwrseq { + status = "okay"; + compatible = "mmc-pwrseq-simple"; + clocks = <&rk809 1>; + clock-names = "ext_clock"; + pinctrl-names = "default"; + pinctrl-0 = <&wifi_enable_h>; + reset-gpios = <&gpio2 RK_PB1 GPIO_ACTIVE_LOW>; + }; + + usb_5v: usb-5v-regulator { + compatible = "regulator-fixed"; + regulator-name = "usb_5v"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + }; + + vcc5v0_sys: vcc5v0-sys-regulator { + compatible = "regulator-fixed"; + regulator-name = "vcc5v0_sys"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + vin-supply = <&usb_5v>; + }; + + vcc3v3_sys: vcc3v3-sys-regulator { + compatible = "regulator-fixed"; + regulator-name = "vcc3v3_sys"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + vin-supply = <&vcc5v0_sys>; + }; + + vcc5v0_usb30_host: vcc5v0-usb30-host-regulator { + compatible = "regulator-fixed"; + regulator-name = "vcc5v0_usb30_host"; + enable-active-high; + gpio = <&gpio0 RK_PC5 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&vcc5v0_usb30_host_en_h>; + regulator-always-on; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + vin-supply = <&vcc5v0_sys>; + }; + + vcc5v0_usb_otg: vcc5v0-usb-otg-regulator { + compatible = "regulator-fixed"; + regulator-name = "vcc5v0_usb_otg"; + enable-active-high; + gpio = <&gpio0 RK_PC6 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&vcc5v0_usb_otg_en_h>; + regulator-always-on; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + vin-supply = <&vcc5v0_sys>; + }; +}; + +&combphy1 { + status = "okay"; +}; + +&cpu0 { + cpu-supply = <&vdd_cpu>; +}; + +&cpu1 { + cpu-supply = <&vdd_cpu>; +}; + +&cpu2 { + cpu-supply = <&vdd_cpu>; +}; + +&cpu3 { + cpu-supply = <&vdd_cpu>; +}; + +&gmac1 { + assigned-clocks = <&cru SCLK_GMAC1_RX_TX>, <&cru SCLK_GMAC1_RGMII_SPEED>, <&cru SCLK_GMAC1>; + assigned-clock-parents = <&cru SCLK_GMAC1_RGMII_SPEED>, <&cru SCLK_GMAC1>, <&gmac1_clkin>; + clock_in_out = "input"; + phy-mode = "rgmii-id"; + phy-supply = <&vcc_3v3>; + pinctrl-names = "default"; + pinctrl-0 = <&gmac1m0_miim + &gmac1m0_tx_bus2 + &gmac1m0_rx_bus2 + &gmac1m0_rgmii_clk + &gmac1m0_clkinout + &gmac1m0_rgmii_bus>; + snps,reset-gpio = <&gpio0 RK_PB7 GPIO_ACTIVE_LOW>; + snps,reset-active-low; + /* Reset time is 20ms, 100ms for rtl8211f */ + snps,reset-delays-us = <0 20000 100000>; + tx_delay = <0x4f>; + rx_delay = <0x24>; + phy-handle = <&rgmii_phy1>; + status = "okay"; +}; + +&i2c0 { + status = "okay"; + + vdd_cpu: regulator@1c { + compatible = "tcs,tcs4525"; + reg = <0x1c>; + fcs,suspend-voltage-selector = <1>; + regulator-name = "vdd_cpu"; + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <1150000>; + regulator-ramp-delay = <2300>; + regulator-always-on; + regulator-boot-on; + vin-supply = <&vcc5v0_sys>; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + rk809: pmic@20 { + compatible = "rockchip,rk809"; + reg = <0x20>; + interrupt-parent = <&gpio0>; + interrupts = <RK_PA7 IRQ_TYPE_LEVEL_LOW>; + clock-output-names = "rk808-clkout1", "rk808-clkout2"; + + pinctrl-names = "default"; + pinctrl-0 = <&pmic_int>; + rockchip,system-power-controller; + wakeup-source; + #clock-cells = <1>; + + vcc1-supply = <&vcc3v3_sys>; + vcc2-supply = <&vcc3v3_sys>; + vcc3-supply = <&vcc3v3_sys>; + vcc4-supply = <&vcc3v3_sys>; + vcc5-supply = <&vcc3v3_sys>; + vcc6-supply = <&vcc3v3_sys>; + vcc7-supply = <&vcc3v3_sys>; + vcc8-supply = <&vcc3v3_sys>; + vcc9-supply = <&vcc3v3_sys>; + + regulators { + vdd_log: DCDC_REG1 { + regulator-name = "vdd_log"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <500000>; + regulator-max-microvolt = <1350000>; + regulator-init-microvolt = <900000>; + regulator-ramp-delay = <6001>; + + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <900000>; + }; + }; + + vdd_gpu: DCDC_REG2 { + regulator-name = "vdd_gpu"; + regulator-min-microvolt = <900000>; + regulator-max-microvolt = <1350000>; + regulator-init-microvolt = <900000>; + regulator-ramp-delay = <6001>; + + regulator-state-mem { + regulator-off-in-suspend; + regulator-suspend-microvolt = <900000>; + }; + }; + + vcc_ddr: DCDC_REG3 { + regulator-name = "vcc_ddr"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1100000>; + regulator-max-microvolt = <1100000>; + regulator-initial-mode = <0x2>; + regulator-state-mem { + regulator-on-in-suspend; + }; + }; + + vdd_npu: DCDC_REG4 { + regulator-name = "vdd_npu"; + regulator-min-microvolt = <900000>; + regulator-max-microvolt = <1350000>; + regulator-initial-mode = <0x2>; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vcc_1v8: DCDC_REG5 { + regulator-name = "vcc_1v8"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <1800000>; + }; + }; + + vdda0v9_image: LDO_REG1 { + regulator-name = "vdda0v9_image"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <900000>; + regulator-max-microvolt = <900000>; + + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <900000>; + }; + }; + + vdda_0v9: LDO_REG2 { + regulator-name = "vdda_0v9"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <900000>; + regulator-max-microvolt = <900000>; + + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <900000>; + }; + }; + + vdda0v9_pmu: LDO_REG3 { + regulator-name = "vdda0v9_pmu"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <900000>; + regulator-max-microvolt = <900000>; + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <900000>; + }; + }; + + vccio_acodec: LDO_REG4 { + regulator-name = "vccio_acodec"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <3300000>; + + }; + }; + + vccio_sd: LDO_REG5 { + regulator-name = "vccio_sd"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <3300000>; + }; + }; + + vcc3v3_pmu: LDO_REG6 { + regulator-name = "vcc3v3_pmu"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <3300000>; + }; + }; + + vcca_1v8: LDO_REG7 { + regulator-name = "vcca_1v8"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <1800000>; + }; + }; + + vcca1v8_pmu: LDO_REG8 { + regulator-name = "vcca1v8_pmu"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <1800000>; + }; + }; + + vcca1v8_image: LDO_REG9 { + regulator-name = "vcca1v8_image"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <1800000>; + }; + }; + + vcc_3v3: SWITCH_REG1 { + regulator-boot-on; + regulator-name = "vcc3v3"; + }; + + vcc3v3_sd: SWITCH_REG2 { + regulator-name = "vcc3v3_sd"; + regulator-always-on; + regulator-boot-on; + }; + }; + }; +}; + +&i2c1 { + status = "okay"; +}; + +&i2c2 { + status = "okay"; +}; + +&i2c3 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c3m1_xfer>; + status = "okay"; +}; + +&i2c5 { + status = "okay"; +}; + +&mdio1 { + rgmii_phy1: ethernet-phy@0 { + compatible = "ethernet-phy-ieee802.3-c22"; + reg = <0x0>; + }; +}; + +&pinctrl { + bt { + bt_enable_h: bt-enable-h { + rockchip,pins = <0 RK_PC1 RK_FUNC_GPIO &pcfg_pull_none>; + }; + + bt_host_wake_l: bt-host-wake-l { + rockchip,pins = <0 RK_PB3 RK_FUNC_GPIO &pcfg_pull_down>; + }; + + bt_wake_l: bt-wake-l { + rockchip,pins = <0 RK_PB4 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; + + leds { + user_led_enable_h: user-led-enable-h { + rockchip,pins = <0 RK_PD3 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; + + pmic { + pmic_int: pmic_int { + rockchip,pins = + <0 RK_PA3 RK_FUNC_GPIO &pcfg_pull_up>; + }; + }; + + sdio-pwrseq { + wifi_enable_h: wifi-enable-h { + rockchip,pins = <2 RK_PB1 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; + + usb { + vcc5v0_usb30_host_en_h: vcc5v0-usb30-host-en_h { + rockchip,pins = <0 RK_PC5 RK_FUNC_GPIO &pcfg_pull_none>; + }; + + vcc5v0_usb_otg_en_h: vcc5v0-usb-otg-en_h { + rockchip,pins = <0 RK_PC6 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; +}; + +&pmu_io_domains { + status = "okay"; + pmuio1-supply = <&vcc3v3_pmu>; + pmuio2-supply = <&vcc3v3_pmu>; + vccio1-supply = <&vccio_acodec>; + vccio2-supply = <&vcc_1v8>; + vccio3-supply = <&vccio_sd>; + vccio4-supply = <&vcc_1v8>; + vccio5-supply = <&vcc_3v3>; + vccio6-supply = <&vcc_1v8>; + vccio7-supply = <&vcc_3v3>; +}; + +&sdhci { + bus-width = <8>; + mmc-hs200-1_8v; + non-removable; + vmmc-supply = <&vcc_3v3>; + vqmmc-supply = <&vcc_1v8>; + status = "okay"; +}; + +&sdmmc0 { + bus-width = <4>; + cap-sd-highspeed; + cd-gpios = <&gpio0 RK_PA4 GPIO_ACTIVE_LOW>; + disable-wp; + pinctrl-names = "default"; + pinctrl-0 = <&sdmmc0_bus4 &sdmmc0_clk &sdmmc0_cmd &sdmmc0_det>; + sd-uhs-sdr104; + vmmc-supply = <&vcc3v3_sd>; + vqmmc-supply = <&vccio_sd>; + status = "okay"; +}; + +&sdmmc1 { + bus-width = <4>; + cap-sd-highspeed; + cap-sdio-irq; + keep-power-in-suspend; + mmc-pwrseq = <&sdio_pwrseq>; + vmmc-supply = <&vcc3v3_sys>; + vqmmc-supply = <&vcca1v8_pmu>; + pinctrl-names = "default"; + pinctrl-0 = <&sdmmc1_bus4 &sdmmc1_cmd &sdmmc1_clk>; + status = "okay"; +}; + +&tsadc { + status = "okay"; +}; + +&uart0 { + pinctrl-names = "default"; + pinctrl-0 = <&uart0_xfer>; + status = "okay"; +}; + +&uart1 { + pinctrl-names = "default"; + pinctrl-0 = <&uart1m0_xfer &uart1m0_ctsn>; + status = "okay"; + uart-has-rtscts; + + bluetooth { + compatible = "brcm,bcm43438-bt"; + clocks = <&rk809 1>; + clock-names = "lpo"; + device-wakeup-gpios = <&gpio2 RK_PC1 GPIO_ACTIVE_HIGH>; + host-wakeup-gpios = <&gpio2 RK_PC0 GPIO_ACTIVE_HIGH>; + shutdown-gpios = <&gpio2 RK_PB7 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&bt_host_wake_l &bt_wake_l &bt_enable_h>; + vbat-supply = <&vcc3v3_sys>; + vddio-supply = <&vcca1v8_pmu>; + }; +}; + +&uart2 { + status = "okay"; +}; + +&usb2phy0_host { + phy-supply = <&vcc5v0_usb30_host>; + status = "okay"; +}; + +&usb2phy0_otg { + phy-supply = <&vcc5v0_usb_otg>; + status = "okay"; +}; + +&usb2phy1_otg { + phy-supply = <&vcc5v0_usb30_host>; + status = "okay"; +}; + +&usb2phy0 { + status = "okay"; +}; + +&usb2phy1 { + status = "okay"; +}; + +&usb_host0_xhci { + status = "okay"; +}; + +&usb_host1_xhci { + status = "okay"; +}; + +&usb_host0_ehci { + status = "okay"; +}; + +&usb_host0_ohci { + status = "okay"; +}; diff --git a/arch/arm64/boot/dts/rockchip/rk3566-soquartz-cm4.dts b/arch/arm64/boot/dts/rockchip/rk3566-soquartz-cm4.dts new file mode 100644 index 000000000000..e00568a6be5c --- /dev/null +++ b/arch/arm64/boot/dts/rockchip/rk3566-soquartz-cm4.dts @@ -0,0 +1,177 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) + +/dts-v1/; + +#include "rk3566-soquartz.dtsi" + +/ { + model = "Pine64 RK3566 SoQuartz with CM4-IO Carrier Board"; + compatible = "pine64,soquartz-cm4io", "pine64,soquartz", "rockchip,rk3566"; + + /* labeled +12v in schematic */ + vcc12v_dcin: vcc12v-dcin-regulator { + compatible = "regulator-fixed"; + regulator-name = "vcc12v_dcin"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <12000000>; + regulator-max-microvolt = <12000000>; + }; + + /* labeled +5v in schematic */ + vcc_5v: vcc-5v-regulator { + compatible = "regulator-fixed"; + regulator-name = "vcc_5v"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + vin-supply = <&vcc12v_dcin>; + }; +}; + +&gmac1 { + status = "okay"; +}; + +/* + * i2c1 is exposed on CM1 / Module1A + * pin 80 - SCL0 - i2c1_scl_m0, pullup to vcc3v3_pmu + * pin 82 - SDA0 - i2c1_sda_m0, pullup to vcc3v3_pmu + */ +&i2c1 { + status = "okay"; + + /* + * the rtc interrupt is tied to PMIC_PWRON, + * it will force reset the board if triggered. + */ + pcf85063: rtc@51 { + compatible = "nxp,pcf85063"; + reg = <0x51>; + }; +}; + +/* + * i2c2 is exposed on CM1 / Module1A - to PI40 + * pin 56 - GPIO3 - i2c2_scl_m1, pullup to vcc_3v3, shared with i2s1_8ch + * pin 58 - GPIO2 - i2c2_sda_m1, pullup to vcc_3v3 + */ +&i2c2 { + status = "disabled"; +}; + +/* + * i2c3 is exposed on CM1 / Module1A - to PI40 + * pin 35 - ID_SC(GPIO28) - i2c3_scl_m0, pullup to vcc_3v3 + * pin 36 - ID_SD(GPIO27) - i2c3_sda_m0, pullup to vcc_3v3 + */ +&i2c3 { + status = "disabled"; +}; + +/* + * i2c4 is exposed on CM2 / Module1B - to PI40 + * pin 45 - GPIO24 - i2c4_scl_m1 + * pin 47 - GPIO23 - i2c4_sda_m1 + */ +&i2c4 { + status = "disabled"; +}; + +/* + * i2s1_8ch is exposed on CM1 / Module1A - to PI40 + * pin 24 - GPIO26 - i2s1_sdi1_m1 + * pin 25 - GPIO21 - i2s1_sdo0_m1 + * pin 26 - GPIO19 - i2s1_lrck_tx_m1 + * pin 27 - GPIO20 - i2s1_sdi0_m1 + * pin 29 - GPIO16 - i2s1_sdi3_m1 + * pin 30 - GPIO6 - i2s1_sdi2_m1 + * pin 40 - GPIO9 - i2s1_sdo1_m1, shared with spi3 + * pin 41 - GPIO25 - i2s1_sdo2_m1 + * pin 49 - GPIO18 - i2s1_sclk_tx_m1 + * pin 50 - GPIO17 - i2s1_mclk_m1 + * pin 56 - GPIO3 - i2s1_sdo3_m1, shared with i2c2 + */ +&i2s1_8ch { + status = "disabled"; +}; + +&led_diy { + status = "okay"; +}; + +&led_work { + status = "okay"; +}; + +&rgmii_phy1 { + status = "okay"; +}; + +/* + * saradc is exposed on CM1 / Module1A - to J2 + * pin 94 - AIN1 - saradc_vin3 + * pin 96 - AIN0 - saradc_vin2 + */ +&saradc { + status = "disabled"; +}; + +&sdmmc0 { + vmmc-supply = <&sdmmc_pwr>; + status = "okay"; +}; + +&sdmmc_pwr { + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + status = "okay"; +}; + +/* + * spi3 is exposed on CM1 / Module1A - to PI40 + * pin 37 - GPIO7 - spi3_cs1_m0 + * pin 38 - GPIO11 - spi3_clk_m0 + * pin 39 - GPIO8 - spi3_cs0_m0 + * pin 40 - GPIO9 - spi3_miso_m0, shared with i2s1_8ch + * pin 44 - GPIO10 - spi3_mosi_m0 + */ +&spi3 { + status = "disabled"; +}; + +/* + * uart2 is exposed on CM1 / Module1A - to PI40 + * pin 51 - GPIO15 - uart2_rx_m0 + * pin 55 - GPIO14 - uart2_tx_m0 + */ +&uart2 { + status = "okay"; +}; + +/* + * uart7 is exposed on CM1 / Module1A - to PI40 + * pin 46 - GPIO22 - uart7_tx_m2 + * pin 47 - GPIO23 - uart7_rx_m2 + */ +&uart7 { + status = "okay"; +}; + +&usb2phy0 { + status = "okay"; +}; + +&usb2phy0_otg { + phy-supply = <&vcc_5v>; + status = "okay"; +}; + +&usb_host0_xhci { + status = "okay"; +}; + +&vbus { + vin-supply = <&vcc_5v>; +}; diff --git a/arch/arm64/boot/dts/rockchip/rk3566-soquartz.dtsi b/arch/arm64/boot/dts/rockchip/rk3566-soquartz.dtsi new file mode 100644 index 000000000000..5bcd4be32964 --- /dev/null +++ b/arch/arm64/boot/dts/rockchip/rk3566-soquartz.dtsi @@ -0,0 +1,616 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) + +/dts-v1/; + +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/pinctrl/rockchip.h> +#include "rk3566.dtsi" + +/ { + model = "Pine64 RK3566 SoQuartz SOM"; + compatible = "pine64,soquartz", "rockchip,rk3566"; + + aliases { + ethernet0 = &gmac1; + mmc0 = &sdmmc0; + mmc1 = &sdhci; + mmc2 = &sdmmc1; + }; + + chosen: chosen { + stdout-path = "serial2:1500000n8"; + }; + + gmac1_clkin: external-gmac1-clock { + compatible = "fixed-clock"; + clock-frequency = <125000000>; + clock-output-names = "gmac1_clkin"; + #clock-cells = <0>; + }; + + leds { + compatible = "gpio-leds"; + + led_diy: led-diy { + label = "diy-led"; + default-state = "on"; + gpios = <&gpio0 RK_PC1 GPIO_ACTIVE_LOW>; + linux,default-trigger = "heartbeat"; + pinctrl-names = "default"; + pinctrl-0 = <&diy_led_enable_h>; + retain-state-suspended; + status = "disabled"; + }; + + led_work: led-work { + label = "work-led"; + default-state = "off"; + gpios = <&gpio0 RK_PC0 GPIO_ACTIVE_LOW>; + pinctrl-names = "default"; + pinctrl-0 = <&work_led_enable_h>; + retain-state-suspended; + status = "disabled"; + }; + }; + + sdio_pwrseq: sdio-pwrseq { + status = "okay"; + compatible = "mmc-pwrseq-simple"; + clocks = <&rk809 1>; + clock-names = "ext_clock"; + pinctrl-names = "default"; + pinctrl-0 = <&wifi_enable_h>; + reset-gpios = <&gpio2 RK_PC2 GPIO_ACTIVE_LOW>; + }; + + vbus: vbus-regulator { + compatible = "regulator-fixed"; + regulator-name = "vbus"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + }; + + /* sourced from vbus, vbus is provided by the carrier board */ + vcc5v0_sys: vcc5v0-sys-regulator { + compatible = "regulator-fixed"; + regulator-name = "vcc5v0_sys"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + vin-supply = <&vbus>; + }; + + vcc3v3_sys: vcc3v3-sys-regulator { + compatible = "regulator-fixed"; + regulator-name = "vcc3v3_sys"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + vin-supply = <&vcc5v0_sys>; + }; + + sdmmc_pwr: sdmmc-pwr-regulator { + compatible = "regulator-fixed"; + enable-active-high; + gpio = <&gpio0 RK_PA5 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&sdmmc_pwr_h>; + regulator-name = "sdmmc_pwr"; + status = "disabled"; + }; +}; + +&cpu0 { + cpu-supply = <&vdd_cpu>; +}; + +&cpu1 { + cpu-supply = <&vdd_cpu>; +}; + +&cpu2 { + cpu-supply = <&vdd_cpu>; +}; + +&cpu3 { + cpu-supply = <&vdd_cpu>; +}; + +&gmac1 { + assigned-clocks = <&cru SCLK_GMAC1_RX_TX>, <&cru SCLK_GMAC1_RGMII_SPEED>, <&cru SCLK_GMAC1>; + assigned-clock-parents = <&cru SCLK_GMAC1_RGMII_SPEED>, <&cru SCLK_GMAC1>, <&gmac1_clkin>; + clock_in_out = "input"; + phy-supply = <&vcc_3v3>; + phy-mode = "rgmii"; + pinctrl-names = "default"; + pinctrl-0 = <&gmac1m0_miim + &gmac1m0_tx_bus2 + &gmac1m0_rx_bus2 + &gmac1m0_rgmii_clk + &gmac1m0_clkinout + &gmac1m0_rgmii_bus>; + snps,reset-gpio = <&gpio0 RK_PC3 GPIO_ACTIVE_LOW>; + snps,reset-active-low; + /* Reset time is 20ms, 100ms for rtl8211f, also works well here */ + snps,reset-delays-us = <0 20000 100000>; + tx_delay = <0x30>; + rx_delay = <0x10>; + phy-handle = <&rgmii_phy1>; + status = "disabled"; +}; + +&i2c0 { + status = "okay"; + + vdd_cpu: regulator@1c { + compatible = "tcs,tcs4525"; + reg = <0x1c>; + fcs,suspend-voltage-selector = <1>; + regulator-name = "vdd_cpu"; + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <1150000>; + regulator-ramp-delay = <2300>; + regulator-always-on; + regulator-boot-on; + vin-supply = <&vcc5v0_sys>; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + rk809: pmic@20 { + compatible = "rockchip,rk809"; + reg = <0x20>; + interrupt-parent = <&gpio0>; + interrupts = <RK_PA3 IRQ_TYPE_LEVEL_LOW>; + #clock-cells = <1>; + clock-output-names = "rk808-clkout1", "rk808-clkout2"; + pinctrl-names = "default"; + pinctrl-0 = <&pmic_int_l>; + rockchip,system-power-controller; + wakeup-source; + + vcc1-supply = <&vcc3v3_sys>; + vcc2-supply = <&vcc3v3_sys>; + vcc3-supply = <&vcc3v3_sys>; + vcc4-supply = <&vcc3v3_sys>; + vcc5-supply = <&vcc3v3_sys>; + vcc6-supply = <&vcc3v3_sys>; + vcc7-supply = <&vcc3v3_sys>; + vcc8-supply = <&vcc3v3_sys>; + vcc9-supply = <&vcc3v3_sys>; + + regulators { + vdd_logic: DCDC_REG1 { + regulator-name = "vdd_logic"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <500000>; + regulator-max-microvolt = <1350000>; + regulator-init-microvolt = <900000>; + regulator-ramp-delay = <6001>; + regulator-initial-mode = <0x2>; + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <900000>; + }; + }; + + vdd_gpu: DCDC_REG2 { + regulator-name = "vdd_gpu"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <500000>; + regulator-max-microvolt = <1350000>; + regulator-init-microvolt = <900000>; + regulator-ramp-delay = <6001>; + regulator-initial-mode = <0x2>; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vcc_ddr: DCDC_REG3 { + regulator-always-on; + regulator-boot-on; + regulator-initial-mode = <0x2>; + regulator-name = "vcc_ddr"; + regulator-state-mem { + regulator-on-in-suspend; + }; + }; + + vdd_npu: DCDC_REG4 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <500000>; + regulator-max-microvolt = <1350000>; + regulator-init-microvolt = <900000>; + regulator-initial-mode = <0x2>; + regulator-name = "vdd_npu"; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vcc_1v8: DCDC_REG5 { + regulator-name = "vcc_1v8"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <1800000>; + }; + }; + + vdda0v9_image: LDO_REG1 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <900000>; + regulator-max-microvolt = <900000>; + regulator-name = "vdda0v9_image"; + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <900000>; + }; + }; + + vdda_0v9: LDO_REG2 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <900000>; + regulator-max-microvolt = <900000>; + regulator-name = "vdda_0v9"; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vdda0v9_pmu: LDO_REG3 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <900000>; + regulator-max-microvolt = <900000>; + regulator-name = "vdda0v9_pmu"; + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <900000>; + }; + }; + + vccio_acodec: LDO_REG4 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-name = "vccio_acodec"; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vccio_sd: LDO_REG5 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + regulator-name = "vccio_sd"; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vcc3v3_pmu: LDO_REG6 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-name = "vcc3v3_pmu"; + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <3300000>; + }; + }; + + vcca_1v8: LDO_REG7 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-name = "vcca_1v8"; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vcca1v8_pmu: LDO_REG8 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-name = "vcca1v8_pmu"; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vcca1v8_image: LDO_REG9 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-name = "vcca1v8_image"; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vcc_3v3: SWITCH_REG1 { + regulator-name = "vcc_3v3"; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vcc3v3_sd: SWITCH_REG2 { + regulator-name = "vcc3v3_sd"; + status = "disabled"; + regulator-state-mem { + regulator-on-in-suspend; + }; + }; + + }; + }; +}; + +/* + * i2c1 is exposed on CM1 / Module1A + * pin 80 - i2c1_scl_m0, pullup to vcc3v3_pmu + * pin 82 - i2c1_sda_m0, pullup to vcc3v3_pmu + */ +&i2c1 { + status = "disabled"; +}; + +/* + * i2c2 is exposed on CM1 / Module1A + * pin 56 - i2c2_scl_m1, pullup to vcc_3v3, shared with i2s1_8ch + * pin 58 - i2c2_sda_m1, pullup to vcc_3v3 + */ +&i2c2 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c2m1_xfer>; + status = "disabled"; +}; + +/* + * i2c3 is exposed on CM1 / Module1A + * pin 35 - i2c3_scl_m0, pullup to vcc_3v3 + * pin 36 - i2c3_sda_m0, pullup to vcc_3v3 + */ +&i2c3 { + status = "disabled"; +}; + +/* + * i2c4 is exposed on CM2 / Module1B + * pin 45 - i2c4_scl_m1 + * pin 47 - i2c4_sda_m1 + */ +&i2c4 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c4m1_xfer>; + status = "disabled"; +}; + +/* + * i2s1_8ch is exposed on CM1 / Module1A + * pin 24 - i2s1_sdi1_m1 + * pin 25 - i2s1_sdo0_m1 + * pin 26 - i2s1_lrck_tx_m1 + * pin 27 - i2s1_sdi0_m1 + * pin 29 - i2s1_sdi3_m1 + * pin 30 - i2s1_sdi2_m1 + * pin 40 - i2s1_sdo1_m1, shared with spi3 + * pin 41 - i2s1_sdo2_m1 + * pin 49 - i2s1_sclk_tx_m1 + * pin 50 - i2s1_mclk_m1 + * pin 56 - i2s1_sdo3_m1, shared with i2c2 + */ +&i2s1_8ch { + pinctrl-names = "default"; + pinctrl-0 = <&i2s1m1_sclktx &i2s1m1_sclkrx + &i2s1m1_lrcktx &i2s1m1_lrckrx + &i2s1m1_sdi0 &i2s1m1_sdi1 + &i2s1m1_sdi2 &i2s1m1_sdi3 + &i2s1m1_sdo0 &i2s1m1_sdo1 + &i2s1m1_sdo2 &i2s1m1_sdo3>; + status = "disabled"; +}; + +&mdio1 { + rgmii_phy1: ethernet-phy@0 { + compatible = "ethernet-phy-ieee802.3-c22"; + reg = <0>; + status = "disabled"; + }; +}; + +&pinctrl { + bt { + bt_enable_h: bt-enable-h { + rockchip,pins = <2 RK_PB7 RK_FUNC_GPIO &pcfg_pull_none>; + }; + + bt_host_wake_l: bt-host-wake-l { + rockchip,pins = <2 RK_PC0 RK_FUNC_GPIO &pcfg_pull_down>; + }; + + bt_wake_l: bt-wake-l { + rockchip,pins = <2 RK_PC1 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; + + leds { + work_led_enable_h: work-led-enable-h { + rockchip,pins = <0 RK_PC0 RK_FUNC_GPIO &pcfg_pull_none>; + }; + + diy_led_enable_h: diy-led-enable-h { + rockchip,pins = <0 RK_PC1 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; + + pmic { + pmic_int_l: pmic-int-l { + rockchip,pins = <0 RK_PA3 RK_FUNC_GPIO &pcfg_pull_up>; + }; + }; + + sdio-pwrseq { + wifi_enable_h: wifi-enable-h { + rockchip,pins = <2 RK_PC2 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; + + sdmmc-pwr { + sdmmc_pwr_h: sdmmc-pwr-h { + rockchip,pins = <0 RK_PA5 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; +}; + +&pmu_io_domains { + pmuio1-supply = <&vcc3v3_pmu>; + pmuio2-supply = <&vcc3v3_pmu>; + vccio1-supply = <&vcc_3v3>; + vccio2-supply = <&vcc_1v8>; + vccio3-supply = <&vccio_sd>; + vccio4-supply = <&vcc_1v8>; + vccio5-supply = <&vcc_3v3>; + vccio6-supply = <&vcc_3v3>; + vccio7-supply = <&vcc_3v3>; + status = "okay"; +}; + +/* + * saradc is exposed on CM1 / Module1A + * pin 94 - saradc_vin3 + * pin 96 - saradc_vin2 + */ +&saradc { + vref-supply = <&vcca_1v8>; + status = "disabled"; +}; + +&sdhci { + bus-width = <8>; + mmc-hs200-1_8v; + non-removable; + vmmc-supply = <&vcc_3v3>; + vqmmc-supply = <&vcc_1v8>; + status = "okay"; +}; + +&sdmmc0 { + broken-cd; + bus-width = <4>; + cap-sd-highspeed; + disable-wp; + pinctrl-names = "default"; + pinctrl-0 = <&sdmmc0_bus4 &sdmmc0_clk &sdmmc0_cmd &sdmmc0_det>; + vqmmc-supply = <&vccio_sd>; + status = "disabled"; +}; + +&sdmmc1 { + bus-width = <4>; + cap-sd-highspeed; + cap-sdio-irq; + keep-power-in-suspend; + mmc-pwrseq = <&sdio_pwrseq>; + non-removable; + pinctrl-names = "default"; + pinctrl-0 = <&sdmmc1_bus4 &sdmmc1_cmd &sdmmc1_clk>; + sd-uhs-sdr104; + vmmc-supply = <&vcc3v3_sys>; + vqmmc-supply = <&vcc_1v8>; + status = "okay"; +}; + +/* + * spi3 is exposed on CM1 / Module1A + * pin 37 - spi3_cs1_m0 + * pin 38 - spi3_clk_m0 + * pin 39 - spi3_cs0_m0 + * pin 40 - spi3_miso_m0, shared with i2s1_8ch + * pin 44 - spi3_mosi_m0 + */ +&spi3 { + status = "disabled"; +}; + +&tsadc { + status = "okay"; +}; + +&uart1 { + pinctrl-names = "default"; + pinctrl-0 = <&uart1m0_xfer &uart1m0_ctsn &uart1m0_rtsn>; + uart-has-rtscts; + status = "okay"; + + bluetooth { + compatible = "brcm,bcm43438-bt"; + clocks = <&rk809 1>; + clock-names = "lpo"; + device-wakeup-gpios = <&gpio2 RK_PC1 GPIO_ACTIVE_HIGH>; + host-wakeup-gpios = <&gpio2 RK_PC0 GPIO_ACTIVE_HIGH>; + shutdown-gpios = <&gpio2 RK_PB7 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&bt_host_wake_l &bt_wake_l &bt_enable_h>; + vbat-supply = <&vcc3v3_sys>; + vddio-supply = <&vcca1v8_pmu>; + }; +}; + +/* + * uart2 is exposed on CM1 / Module1A + * pin 51 - uart2_rx_m0 + * pin 55 - uart2_tx_m0 + */ +&uart2 { + status = "disabled"; +}; + +/* + * uart7 is exposed on CM1 / Module1A + * pin 46 - uart7_tx_m2 + * pin 47 - uart7_rx_m2 + */ +&uart7 { + pinctrl-names = "default"; + pinctrl-0 = <&uart7m2_xfer>; + status = "disabled"; +}; + +/* dwc3_otg is the only usb port available */ +&usb2phy0 { + status = "disabled"; +}; + +&usb2phy0_otg { + status = "disabled"; +}; + +&usb_host0_xhci { + status = "disabled"; +}; diff --git a/arch/arm64/boot/dts/rockchip/rk3566.dtsi b/arch/arm64/boot/dts/rockchip/rk3566.dtsi index 3839eef5e4f7..0b957068ff89 100644 --- a/arch/arm64/boot/dts/rockchip/rk3566.dtsi +++ b/arch/arm64/boot/dts/rockchip/rk3566.dtsi @@ -6,6 +6,10 @@ compatible = "rockchip,rk3566"; }; +&pipegrf { + compatible = "rockchip,rk3566-pipe-grf", "syscon"; +}; + &power { power-domain@RK3568_PD_PIPE { reg = <RK3568_PD_PIPE>; @@ -18,3 +22,10 @@ #power-domain-cells = <0>; }; }; + +&usb_host0_xhci { + phys = <&usb2phy0_otg>; + phy-names = "usb2-phy"; + extcon = <&usb2phy0>; + maximum-speed = "high-speed"; +}; diff --git a/arch/arm64/boot/dts/rockchip/rk3568-bpi-r2-pro.dts b/arch/arm64/boot/dts/rockchip/rk3568-bpi-r2-pro.dts index 067fe4a6b178..40cf2236c0b6 100644 --- a/arch/arm64/boot/dts/rockchip/rk3568-bpi-r2-pro.dts +++ b/arch/arm64/boot/dts/rockchip/rk3568-bpi-r2-pro.dts @@ -73,6 +73,55 @@ regulator-max-microvolt = <5000000>; vin-supply = <&dc_12v>; }; + + vcc5v0_usb: vcc5v0_usb { + compatible = "regulator-fixed"; + regulator-name = "vcc5v0_usb"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + vin-supply = <&dc_12v>; + }; + + vcc5v0_usb_host: vcc5v0-usb-host { + compatible = "regulator-fixed"; + enable-active-high; + gpio = <&gpio0 RK_PA6 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&vcc5v0_usb_host_en>; + regulator-name = "vcc5v0_usb_host"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + vin-supply = <&vcc5v0_usb>; + }; + + vcc5v0_usb_otg: vcc5v0-usb-otg { + compatible = "regulator-fixed"; + enable-active-high; + gpio = <&gpio0 RK_PA5 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&vcc5v0_usb_otg_en>; + regulator-name = "vcc5v0_usb_otg"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + vin-supply = <&vcc5v0_usb>; + }; +}; + +&combphy0 { + /* used for USB3 */ + status = "okay"; +}; + +&combphy1 { + /* used for USB3 */ + status = "okay"; +}; + +&combphy2 { + /* used for SATA */ + status = "okay"; }; &gmac0 { @@ -368,6 +417,16 @@ <0 RK_PA3 RK_FUNC_GPIO &pcfg_pull_up>; }; }; + + usb { + vcc5v0_usb_host_en: vcc5v0_usb_host_en { + rockchip,pins = <0 RK_PA6 RK_FUNC_GPIO &pcfg_pull_none>; + }; + + vcc5v0_usb_otg_en: vcc5v0_usb_otg_en { + rockchip,pins = <0 RK_PA5 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; }; &pmu_io_domains { @@ -430,6 +489,10 @@ status = "okay"; }; +&sata2 { + status = "okay"; +}; + &sdhci { bus-width = <8>; max-frequency = <200000000>; @@ -485,3 +548,42 @@ pinctrl-0 = <&uart9m1_xfer>; status = "disabled"; }; + +&usb_host0_ehci { + status = "okay"; +}; + +&usb_host0_ohci { + status = "okay"; +}; + +&usb_host0_xhci { + extcon = <&usb2phy0>; + status = "okay"; +}; + +&usb_host1_ehci { + status = "okay"; +}; + +&usb_host1_ohci { + status = "okay"; +}; + +&usb_host1_xhci { + status = "okay"; +}; + +&usb2phy0 { + status = "okay"; +}; + +&usb2phy0_host { + phy-supply = <&vcc5v0_usb_host>; + status = "okay"; +}; + +&usb2phy0_otg { + phy-supply = <&vcc5v0_usb_otg>; + status = "okay"; +}; diff --git a/arch/arm64/boot/dts/rockchip/rk3568-evb1-v10.dts b/arch/arm64/boot/dts/rockchip/rk3568-evb1-v10.dts index a794a0ea5c70..622be8be9813 100644 --- a/arch/arm64/boot/dts/rockchip/rk3568-evb1-v10.dts +++ b/arch/arm64/boot/dts/rockchip/rk3568-evb1-v10.dts @@ -103,6 +103,18 @@ vin-supply = <&vcc5v0_usb>; }; + vcc5v0_usb_otg: vcc5v0-usb-otg { + compatible = "regulator-fixed"; + enable-active-high; + gpio = <&gpio0 RK_PA5 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&vcc5v0_usb_otg_en>; + regulator-name = "vcc5v0_usb_otg"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + vin-supply = <&vcc5v0_usb>; + }; + vcc3v3_lcd0_n: vcc3v3-lcd0-n { compatible = "regulator-fixed"; regulator-name = "vcc3v3_lcd0_n"; @@ -136,6 +148,14 @@ }; }; +&combphy0 { + status = "okay"; +}; + +&combphy1 { + status = "okay"; +}; + &cpu0 { cpu-supply = <&vdd_cpu>; }; @@ -507,6 +527,9 @@ vcc5v0_usb_host_en: vcc5v0_usb_host_en { rockchip,pins = <0 RK_PA6 RK_FUNC_GPIO &pcfg_pull_none>; }; + vcc5v0_usb_otg_en: vcc5v0_usb_otg_en { + rockchip,pins = <0 RK_PA5 RK_FUNC_GPIO &pcfg_pull_none>; + }; }; }; @@ -568,6 +591,11 @@ status = "okay"; }; +&usb_host0_xhci { + extcon = <&usb2phy0>; + status = "okay"; +}; + &usb_host1_ehci { status = "okay"; }; @@ -576,6 +604,24 @@ status = "okay"; }; +&usb_host1_xhci { + status = "okay"; +}; + +&usb2phy0 { + status = "okay"; +}; + +&usb2phy0_host { + phy-supply = <&vcc5v0_usb_host>; + status = "okay"; +}; + +&usb2phy0_otg { + vbus-supply = <&vcc5v0_usb_otg>; + status = "okay"; +}; + &usb2phy1 { status = "okay"; }; diff --git a/arch/arm64/boot/dts/rockchip/rk3568-rock-3a.dts b/arch/arm64/boot/dts/rockchip/rk3568-rock-3a.dts new file mode 100644 index 000000000000..0813c0c5abde --- /dev/null +++ b/arch/arm64/boot/dts/rockchip/rk3568-rock-3a.dts @@ -0,0 +1,562 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) + +/dts-v1/; +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/leds/common.h> +#include <dt-bindings/pinctrl/rockchip.h> +#include "rk3568.dtsi" + +/ { + model = "Radxa ROCK3 Model A"; + compatible = "radxa,rock3a", "rockchip,rk3568"; + + aliases { + ethernet0 = &gmac1; + mmc0 = &sdmmc0; + mmc1 = &sdhci; + }; + + chosen: chosen { + stdout-path = "serial2:1500000n8"; + }; + + leds { + compatible = "gpio-leds"; + + led_user: led-0 { + gpios = <&gpio0 RK_PB7 GPIO_ACTIVE_HIGH>; + function = LED_FUNCTION_HEARTBEAT; + color = <LED_COLOR_ID_BLUE>; + linux,default-trigger = "heartbeat"; + pinctrl-names = "default"; + pinctrl-0 = <&led_user_en>; + }; + }; + + rk809-sound { + compatible = "simple-audio-card"; + simple-audio-card,format = "i2s"; + simple-audio-card,name = "Analog RK809"; + simple-audio-card,mclk-fs = <256>; + + simple-audio-card,cpu { + sound-dai = <&i2s1_8ch>; + }; + + simple-audio-card,codec { + sound-dai = <&rk809>; + }; + }; + + vcc12v_dcin: vcc12v-dcin { + compatible = "regulator-fixed"; + regulator-name = "vcc12v_dcin"; + regulator-always-on; + regulator-boot-on; + }; + + vcc3v3_sys: vcc3v3-sys { + compatible = "regulator-fixed"; + regulator-name = "vcc3v3_sys"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + vin-supply = <&vcc12v_dcin>; + }; + + vcc5v0_sys: vcc5v0-sys { + compatible = "regulator-fixed"; + regulator-name = "vcc5v0_sys"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + vin-supply = <&vcc12v_dcin>; + }; + + vcc5v0_usb: vcc5v0-usb { + compatible = "regulator-fixed"; + regulator-name = "vcc5v0_usb"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + vin-supply = <&vcc12v_dcin>; + }; + + vcc5v0_usb_host: vcc5v0-usb-host { + compatible = "regulator-fixed"; + enable-active-high; + gpio = <&gpio0 RK_PA6 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&vcc5v0_usb_host_en>; + regulator-name = "vcc5v0_usb_host"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + vin-supply = <&vcc5v0_usb>; + }; + + vcc5v0_usb_hub: vcc5v0-usb-hub-regulator { + compatible = "regulator-fixed"; + enable-active-high; + gpio = <&gpio0 RK_PD5 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&vcc5v0_usb_hub_en>; + regulator-name = "vcc5v0_usb_hub"; + regulator-always-on; + vin-supply = <&vcc5v0_usb>; + }; + + vcc5v0_usb_otg: vcc5v0-usb-otg-regulator { + compatible = "regulator-fixed"; + enable-active-high; + gpio = <&gpio0 RK_PA5 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&vcc5v0_usb_otg_en>; + regulator-name = "vcc5v0_usb_otg"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + vin-supply = <&vcc5v0_usb>; + }; +}; + +&combphy0 { + status = "okay"; +}; + +&combphy1 { + status = "okay"; +}; + +&cpu0 { + cpu-supply = <&vdd_cpu>; +}; + +&cpu1 { + cpu-supply = <&vdd_cpu>; +}; + +&cpu2 { + cpu-supply = <&vdd_cpu>; +}; + +&cpu3 { + cpu-supply = <&vdd_cpu>; +}; + +&gmac1 { + assigned-clocks = <&cru SCLK_GMAC1_RX_TX>, <&cru SCLK_GMAC1>; + assigned-clock-parents = <&cru SCLK_GMAC1_RGMII_SPEED>; + assigned-clock-rates = <0>, <125000000>; + clock_in_out = "output"; + phy-handle = <&rgmii_phy1>; + phy-mode = "rgmii-id"; + pinctrl-names = "default"; + pinctrl-0 = <&gmac1m1_miim + &gmac1m1_tx_bus2 + &gmac1m1_rx_bus2 + &gmac1m1_rgmii_clk + &gmac1m1_rgmii_bus>; + status = "okay"; +}; + +&gpu { + mali-supply = <&vdd_gpu>; + status = "okay"; +}; + +&i2c0 { + status = "okay"; + + vdd_cpu: regulator@1c { + compatible = "tcs,tcs4525"; + reg = <0x1c>; + fcs,suspend-voltage-selector = <1>; + regulator-name = "vdd_cpu"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <1150000>; + regulator-ramp-delay = <2300>; + vin-supply = <&vcc5v0_sys>; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + rk809: pmic@20 { + compatible = "rockchip,rk809"; + reg = <0x20>; + interrupt-parent = <&gpio0>; + interrupts = <RK_PA3 IRQ_TYPE_LEVEL_LOW>; + assigned-clocks = <&cru I2S1_MCLKOUT_TX>; + assigned-clock-parents = <&cru CLK_I2S1_8CH_TX>; + #clock-cells = <1>; + clock-names = "mclk"; + clocks = <&cru I2S1_MCLKOUT_TX>; + pinctrl-names = "default"; + pinctrl-0 = <&pmic_int>, <&i2s1m0_mclk>; + rockchip,system-power-controller; + #sound-dai-cells = <0>; + vcc1-supply = <&vcc3v3_sys>; + vcc2-supply = <&vcc3v3_sys>; + vcc3-supply = <&vcc3v3_sys>; + vcc4-supply = <&vcc3v3_sys>; + vcc5-supply = <&vcc3v3_sys>; + vcc6-supply = <&vcc3v3_sys>; + vcc7-supply = <&vcc3v3_sys>; + vcc8-supply = <&vcc3v3_sys>; + vcc9-supply = <&vcc3v3_sys>; + wakeup-source; + + regulators { + vdd_logic: DCDC_REG1 { + regulator-name = "vdd_logic"; + regulator-always-on; + regulator-boot-on; + regulator-init-microvolt = <900000>; + regulator-initial-mode = <0x2>; + regulator-min-microvolt = <500000>; + regulator-max-microvolt = <1350000>; + regulator-ramp-delay = <6001>; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vdd_gpu: DCDC_REG2 { + regulator-name = "vdd_gpu"; + regulator-always-on; + regulator-init-microvolt = <900000>; + regulator-initial-mode = <0x2>; + regulator-min-microvolt = <500000>; + regulator-max-microvolt = <1350000>; + regulator-ramp-delay = <6001>; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vcc_ddr: DCDC_REG3 { + regulator-name = "vcc_ddr"; + regulator-always-on; + regulator-boot-on; + regulator-initial-mode = <0x2>; + + regulator-state-mem { + regulator-on-in-suspend; + }; + }; + + vdd_npu: DCDC_REG4 { + regulator-name = "vdd_npu"; + regulator-init-microvolt = <900000>; + regulator-initial-mode = <0x2>; + regulator-min-microvolt = <500000>; + regulator-max-microvolt = <1350000>; + regulator-ramp-delay = <6001>; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vcc_1v8: DCDC_REG5 { + regulator-name = "vcc_1v8"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vdda0v9_image: LDO_REG1 { + regulator-name = "vdda0v9_image"; + regulator-min-microvolt = <900000>; + regulator-max-microvolt = <900000>; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vdda_0v9: LDO_REG2 { + regulator-name = "vdda_0v9"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <900000>; + regulator-max-microvolt = <900000>; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vdda0v9_pmu: LDO_REG3 { + regulator-name = "vdda0v9_pmu"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <900000>; + regulator-max-microvolt = <900000>; + + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <900000>; + }; + }; + + vccio_acodec: LDO_REG4 { + regulator-name = "vccio_acodec"; + regulator-always-on; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vccio_sd: LDO_REG5 { + regulator-name = "vccio_sd"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vcc3v3_pmu: LDO_REG6 { + regulator-name = "vcc3v3_pmu"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <3300000>; + }; + }; + + vcca_1v8: LDO_REG7 { + regulator-name = "vcca_1v8"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vcca1v8_pmu: LDO_REG8 { + regulator-name = "vcca1v8_pmu"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <1800000>; + }; + }; + + vcca1v8_image: LDO_REG9 { + regulator-name = "vcca1v8_image"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vcc_3v3: SWITCH_REG1 { + regulator-name = "vcc_3v3"; + regulator-always-on; + regulator-boot-on; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vcc3v3_sd: SWITCH_REG2 { + regulator-name = "vcc3v3_sd"; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + }; + + codec { + mic-in-differential; + }; + }; +}; + +&i2s1_8ch { + rockchip,trcm-sync-tx-only; + status = "okay"; +}; + +&mdio1 { + rgmii_phy1: ethernet-phy@0 { + compatible = "ethernet-phy-ieee802.3-c22"; + reg = <0x0>; + pinctrl-names = "default"; + pinctrl-0 = <ð_phy_rst>; + reset-assert-us = <20000>; + reset-deassert-us = <100000>; + reset-gpios = <&gpio3 RK_PB0 GPIO_ACTIVE_LOW>; + }; +}; + +&pinctrl { + ethernet { + eth_phy_rst: eth_phy_rst { + rockchip,pins = <3 RK_PB0 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; + + leds { + led_user_en: led_user_en { + rockchip,pins = <0 RK_PB7 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; + + pmic { + pmic_int: pmic_int { + rockchip,pins = + <0 RK_PA3 RK_FUNC_GPIO &pcfg_pull_up>; + }; + }; + + usb { + vcc5v0_usb_host_en: vcc5v0_usb_host_en { + rockchip,pins = <0 RK_PA6 RK_FUNC_GPIO &pcfg_pull_none>; + }; + vcc5v0_usb_hub_en: vcc5v0_usb_hub_en { + rockchip,pins = <0 RK_PD5 RK_FUNC_GPIO &pcfg_pull_none>; + }; + vcc5v0_usb_otg_en: vcc5v0_usb_otg_en { + rockchip,pins = <0 RK_PA5 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; +}; + +&pmu_io_domains { + pmuio1-supply = <&vcc3v3_pmu>; + pmuio2-supply = <&vcc3v3_pmu>; + vccio1-supply = <&vccio_acodec>; + vccio2-supply = <&vcc_1v8>; + vccio3-supply = <&vccio_sd>; + vccio4-supply = <&vcc_1v8>; + vccio5-supply = <&vcc_3v3>; + vccio6-supply = <&vcc_1v8>; + vccio7-supply = <&vcc_3v3>; + status = "okay"; +}; + +&saradc { + vref-supply = <&vcca_1v8>; + status = "okay"; +}; + +&sdhci { + bus-width = <8>; + max-frequency = <200000000>; + non-removable; + pinctrl-names = "default"; + pinctrl-0 = <&emmc_bus8 &emmc_clk &emmc_cmd &emmc_datastrobe>; + vmmc-supply = <&vcc_3v3>; + vqmmc-supply = <&vcc_1v8>; + status = "okay"; +}; + +&sdmmc0 { + bus-width = <4>; + cap-sd-highspeed; + cd-gpios = <&gpio0 RK_PA4 GPIO_ACTIVE_LOW>; + disable-wp; + pinctrl-names = "default"; + pinctrl-0 = <&sdmmc0_bus4 &sdmmc0_clk &sdmmc0_cmd &sdmmc0_det>; + sd-uhs-sdr104; + vmmc-supply = <&vcc3v3_sd>; + vqmmc-supply = <&vccio_sd>; + status = "okay"; +}; + +&tsadc { + rockchip,hw-tshut-mode = <1>; + rockchip,hw-tshut-polarity = <0>; + status = "okay"; +}; + +&uart2 { + status = "okay"; +}; + +&usb_host0_ehci { + status = "okay"; +}; + +&usb_host0_ohci { + status = "okay"; +}; + +&usb_host0_xhci { + extcon = <&usb2phy0>; + status = "okay"; +}; + +&usb_host1_ehci { + status = "okay"; +}; + +&usb_host1_ohci { + status = "okay"; +}; + +&usb_host1_xhci { + status = "okay"; +}; + +&usb2phy0 { + status = "okay"; +}; + +&usb2phy0_host { + phy-supply = <&vcc5v0_usb_host>; + status = "okay"; +}; + +&usb2phy0_otg { + vbus-supply = <&vcc5v0_usb_otg>; + status = "okay"; +}; + +&usb2phy1 { + status = "okay"; +}; + +&usb2phy1_host { + phy-supply = <&vcc5v0_usb_host>; + status = "okay"; +}; + +&usb2phy1_otg { + phy-supply = <&vcc5v0_usb_host>; + status = "okay"; +}; diff --git a/arch/arm64/boot/dts/rockchip/rk3568.dtsi b/arch/arm64/boot/dts/rockchip/rk3568.dtsi index 5b0f528d6818..5eafddf62edc 100644 --- a/arch/arm64/boot/dts/rockchip/rk3568.dtsi +++ b/arch/arm64/boot/dts/rockchip/rk3568.dtsi @@ -8,6 +8,20 @@ / { compatible = "rockchip,rk3568"; + sata0: sata@fc000000 { + compatible = "rockchip,rk3568-dwc-ahci", "snps,dwc-ahci"; + reg = <0 0xfc000000 0 0x1000>; + clocks = <&cru ACLK_SATA0>, <&cru CLK_SATA0_PMALIVE>, + <&cru CLK_SATA0_RXOOB>; + clock-names = "sata", "pmalive", "rxoob"; + interrupts = <GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH>; + phys = <&combphy0 PHY_TYPE_SATA>; + phy-names = "sata-phy"; + ports-implemented = <0x1>; + power-domains = <&power RK3568_PD_PIPE>; + status = "disabled"; + }; + pipe_phy_grf0: syscon@fdc70000 { compatible = "rockchip,rk3568-pipe-phy-grf", "syscon"; reg = <0x0 0xfdc70000 0x0 0x1000>; @@ -99,6 +113,10 @@ }; }; +&pipegrf { + compatible = "rockchip,rk3568-pipe-grf", "syscon"; +}; + &power { power-domain@RK3568_PD_PIPE { reg = <RK3568_PD_PIPE>; @@ -114,3 +132,8 @@ #power-domain-cells = <0>; }; }; + +&usb_host0_xhci { + phys = <&usb2phy0_otg>, <&combphy0 PHY_TYPE_USB3>; + phy-names = "usb2-phy", "usb3-phy"; +}; diff --git a/arch/arm64/boot/dts/rockchip/rk356x.dtsi b/arch/arm64/boot/dts/rockchip/rk356x.dtsi index 7cdef800cb3c..1042e68602de 100644 --- a/arch/arm64/boot/dts/rockchip/rk356x.dtsi +++ b/arch/arm64/boot/dts/rockchip/rk356x.dtsi @@ -230,6 +230,68 @@ }; }; + sata1: sata@fc400000 { + compatible = "rockchip,rk3568-dwc-ahci", "snps,dwc-ahci"; + reg = <0 0xfc400000 0 0x1000>; + clocks = <&cru ACLK_SATA1>, <&cru CLK_SATA1_PMALIVE>, + <&cru CLK_SATA1_RXOOB>; + clock-names = "sata", "pmalive", "rxoob"; + interrupts = <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>; + phys = <&combphy1 PHY_TYPE_SATA>; + phy-names = "sata-phy"; + ports-implemented = <0x1>; + power-domains = <&power RK3568_PD_PIPE>; + status = "disabled"; + }; + + sata2: sata@fc800000 { + compatible = "rockchip,rk3568-dwc-ahci", "snps,dwc-ahci"; + reg = <0 0xfc800000 0 0x1000>; + clocks = <&cru ACLK_SATA2>, <&cru CLK_SATA2_PMALIVE>, + <&cru CLK_SATA2_RXOOB>; + clock-names = "sata", "pmalive", "rxoob"; + interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>; + phys = <&combphy2 PHY_TYPE_SATA>; + phy-names = "sata-phy"; + ports-implemented = <0x1>; + power-domains = <&power RK3568_PD_PIPE>; + status = "disabled"; + }; + + usb_host0_xhci: usb@fcc00000 { + compatible = "rockchip,rk3568-dwc3", "snps,dwc3"; + reg = <0x0 0xfcc00000 0x0 0x400000>; + interrupts = <GIC_SPI 169 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cru CLK_USB3OTG0_REF>, <&cru CLK_USB3OTG0_SUSPEND>, + <&cru ACLK_USB3OTG0>; + clock-names = "ref_clk", "suspend_clk", + "bus_clk"; + dr_mode = "otg"; + phy_type = "utmi_wide"; + power-domains = <&power RK3568_PD_PIPE>; + resets = <&cru SRST_USB3OTG0>; + snps,dis_u2_susphy_quirk; + status = "disabled"; + }; + + usb_host1_xhci: usb@fd000000 { + compatible = "rockchip,rk3568-dwc3", "snps,dwc3"; + reg = <0x0 0xfd000000 0x0 0x400000>; + interrupts = <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cru CLK_USB3OTG1_REF>, <&cru CLK_USB3OTG1_SUSPEND>, + <&cru ACLK_USB3OTG1>; + clock-names = "ref_clk", "suspend_clk", + "bus_clk"; + dr_mode = "host"; + phys = <&usb2phy0_host>, <&combphy1 PHY_TYPE_USB3>; + phy-names = "usb2-phy", "usb3-phy"; + phy_type = "utmi_wide"; + power-domains = <&power RK3568_PD_PIPE>; + resets = <&cru SRST_USB3OTG1>; + snps,dis_u2_susphy_quirk; + status = "disabled"; + }; + gic: interrupt-controller@fd400000 { compatible = "arm,gic-v3"; reg = <0x0 0xfd400000 0 0x10000>, /* GICD */ @@ -297,7 +359,6 @@ }; pipegrf: syscon@fdc50000 { - compatible = "rockchip,rk3568-pipe-grf", "syscon"; reg = <0x0 0xfdc50000 0x0 0x1000>; }; @@ -717,6 +778,17 @@ status = "disabled"; }; + sfc: spi@fe300000 { + compatible = "rockchip,sfc"; + reg = <0x0 0xfe300000 0x0 0x4000>; + interrupts = <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cru SCLK_SFC>, <&cru HCLK_SFC>; + clock-names = "clk_sfc", "hclk_sfc"; + pinctrl-0 = <&fspi_pins>; + pinctrl-names = "default"; + status = "disabled"; + }; + sdhci: mmc@fe310000 { compatible = "rockchip,rk3568-dwcmshc"; reg = <0x0 0xfe310000 0x0 0x10000>; diff --git a/arch/arm64/boot/dts/synaptics/as370.dtsi b/arch/arm64/boot/dts/synaptics/as370.dtsi deleted file mode 100644 index 4bb5d650df9c..000000000000 --- a/arch/arm64/boot/dts/synaptics/as370.dtsi +++ /dev/null @@ -1,173 +0,0 @@ -// SPDX-License-Identifier: (GPL-2.0 OR MIT) -/* - * Copyright (C) 2018 Synaptics Incorporated - * - * Author: Jisheng Zhang <jszhang@kernel.org> - */ - -#include <dt-bindings/interrupt-controller/arm-gic.h> - -/ { - compatible = "syna,as370"; - interrupt-parent = <&gic>; - #address-cells = <2>; - #size-cells = <2>; - - psci { - compatible = "arm,psci-1.0"; - method = "smc"; - }; - - cpus { - #address-cells = <1>; - #size-cells = <0>; - - cpu0: cpu@0 { - compatible = "arm,cortex-a53"; - device_type = "cpu"; - reg = <0x0>; - enable-method = "psci"; - next-level-cache = <&l2>; - cpu-idle-states = <&CPU_SLEEP_0>; - }; - - cpu1: cpu@1 { - compatible = "arm,cortex-a53"; - device_type = "cpu"; - reg = <0x1>; - enable-method = "psci"; - next-level-cache = <&l2>; - cpu-idle-states = <&CPU_SLEEP_0>; - }; - - cpu2: cpu@2 { - compatible = "arm,cortex-a53"; - device_type = "cpu"; - reg = <0x2>; - enable-method = "psci"; - next-level-cache = <&l2>; - cpu-idle-states = <&CPU_SLEEP_0>; - }; - - cpu3: cpu@3 { - compatible = "arm,cortex-a53"; - device_type = "cpu"; - reg = <0x3>; - enable-method = "psci"; - next-level-cache = <&l2>; - cpu-idle-states = <&CPU_SLEEP_0>; - }; - - l2: cache { - compatible = "cache"; - }; - - idle-states { - entry-method = "psci"; - CPU_SLEEP_0: cpu-sleep-0 { - compatible = "arm,idle-state"; - local-timer-stop; - arm,psci-suspend-param = <0x0010000>; - entry-latency-us = <75>; - exit-latency-us = <155>; - min-residency-us = <1000>; - }; - }; - }; - - osc: osc { - compatible = "fixed-clock"; - #clock-cells = <0>; - clock-frequency = <25000000>; - }; - - pmu { - compatible = "arm,cortex-a53-pmu"; - interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>; - interrupt-affinity = <&cpu0>, - <&cpu1>, - <&cpu2>, - <&cpu3>; - }; - - timer { - compatible = "arm,armv8-timer"; - interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, - <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, - <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, - <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>; - }; - - soc@f7000000 { - compatible = "simple-bus"; - #address-cells = <1>; - #size-cells = <1>; - ranges = <0 0 0xf7000000 0x1000000>; - - gic: interrupt-controller@901000 { - compatible = "arm,gic-400"; - #interrupt-cells = <3>; - interrupt-controller; - reg = <0x901000 0x1000>, - <0x902000 0x2000>, - <0x904000 0x2000>, - <0x906000 0x2000>; - interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>; - }; - - apb@e80000 { - compatible = "simple-bus"; - #address-cells = <1>; - #size-cells = <1>; - ranges = <0 0xe80000 0x10000>; - - uart0: serial@c00 { - compatible = "snps,dw-apb-uart"; - reg = <0xc00 0x100>; - interrupts = <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&osc>; - reg-shift = <2>; - status = "disabled"; - }; - - gpio0: gpio@1800 { - compatible = "snps,dw-apb-gpio"; - reg = <0x1800 0x400>; - #address-cells = <1>; - #size-cells = <0>; - - porta: gpio-port@0 { - compatible = "snps,dw-apb-gpio-port"; - gpio-controller; - #gpio-cells = <2>; - ngpios = <32>; - reg = <0>; - interrupt-controller; - #interrupt-cells = <2>; - interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>; - }; - }; - - gpio1: gpio@2000 { - compatible = "snps,dw-apb-gpio"; - reg = <0x2000 0x400>; - #address-cells = <1>; - #size-cells = <0>; - - portb: gpio-port@1 { - compatible = "snps,dw-apb-gpio-port"; - gpio-controller; - #gpio-cells = <2>; - ngpios = <32>; - reg = <0>; - interrupt-controller; - #interrupt-cells = <2>; - interrupts = <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>; - }; - }; - }; - }; -}; diff --git a/arch/arm64/boot/dts/tesla/fsd.dtsi b/arch/arm64/boot/dts/tesla/fsd.dtsi index 9a652abcbcac..af39655331de 100644 --- a/arch/arm64/boot/dts/tesla/fsd.dtsi +++ b/arch/arm64/boot/dts/tesla/fsd.dtsi @@ -432,8 +432,6 @@ reg = <0x0 0x10100000 0x0 0x1000>; interrupts = <GIC_SPI 424 IRQ_TYPE_LEVEL_HIGH>; #dma-cells = <1>; - #dma-channels = <8>; - #dma-requests = <32>; clocks = <&clock_imem IMEM_DMA0_IPCLKPORT_ACLK>; clock-names = "apb_pclk"; iommus = <&smmu_imem 0x800 0x0>; @@ -444,8 +442,6 @@ reg = <0x0 0x10110000 0x0 0x1000>; interrupts = <GIC_SPI 425 IRQ_TYPE_LEVEL_HIGH>; #dma-cells = <1>; - #dma-channels = <8>; - #dma-requests = <32>; clocks = <&clock_imem IMEM_DMA1_IPCLKPORT_ACLK>; clock-names = "apb_pclk"; iommus = <&smmu_imem 0x801 0x0>; @@ -456,8 +452,6 @@ reg = <0x0 0x14280000 0x0 0x1000>; interrupts = <GIC_SPI 190 IRQ_TYPE_LEVEL_HIGH>; #dma-cells = <1>; - #dma-channels = <8>; - #dma-requests = <32>; clocks = <&clock_peric PERIC_DMA0_IPCLKPORT_ACLK>; clock-names = "apb_pclk"; iommus = <&smmu_peric 0x2 0x0>; @@ -468,8 +462,6 @@ reg = <0x0 0x14290000 0x0 0x1000>; interrupts = <GIC_SPI 191 IRQ_TYPE_LEVEL_HIGH>; #dma-cells = <1>; - #dma-channels = <8>; - #dma-requests = <32>; clocks = <&clock_peric PERIC_DMA1_IPCLKPORT_ACLK>; clock-names = "apb_pclk"; iommus = <&smmu_peric 0x1 0x0>; @@ -727,7 +719,7 @@ }; timer@10040000 { - compatible = "samsung,exynos4210-mct"; + compatible = "tesla,fsd-mct", "samsung,exynos4210-mct"; reg = <0x0 0x10040000 0x0 0x800>; interrupts = <GIC_SPI 455 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 456 IRQ_TYPE_LEVEL_HIGH>, diff --git a/arch/arm64/boot/dts/ti/k3-am62-main.dtsi b/arch/arm64/boot/dts/ti/k3-am62-main.dtsi index c68472c692f4..d08abad0bcf4 100644 --- a/arch/arm64/boot/dts/ti/k3-am62-main.dtsi +++ b/arch/arm64/boot/dts/ti/k3-am62-main.dtsi @@ -6,6 +6,14 @@ */ &cbass_main { + oc_sram: sram@70000000 { + compatible = "mmio-sram"; + reg = <0x00 0x70000000 0x00 0x10000>; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x00 0x70000000 0x10000>; + }; + gic500: interrupt-controller@1800000 { compatible = "arm,gic-v3"; #address-cells = <2>; @@ -40,6 +48,12 @@ #address-cells = <1>; #size-cells = <1>; ranges = <0x0 0x00 0x00100000 0x20000>; + + phy_gmii_sel: phy@4044 { + compatible = "ti,am654-phy-gmii-sel"; + reg = <0x4044 0x8>; + #phy-cells = <1>; + }; }; dmss: bus@48000000 { @@ -61,6 +75,69 @@ interrupt-names = "rx_012"; interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>; }; + + inta_main_dmss: interrupt-controller@48000000 { + compatible = "ti,sci-inta"; + reg = <0x00 0x48000000 0x00 0x100000>; + #interrupt-cells = <0>; + interrupt-controller; + interrupt-parent = <&gic500>; + msi-controller; + ti,sci = <&dmsc>; + ti,sci-dev-id = <28>; + ti,interrupt-ranges = <4 68 36>; + ti,unmapped-event-sources = <&main_bcdma>, <&main_pktdma>; + }; + + main_bcdma: dma-controller@485c0100 { + compatible = "ti,am64-dmss-bcdma"; + reg = <0x00 0x485c0100 0x00 0x100>, + <0x00 0x4c000000 0x00 0x20000>, + <0x00 0x4a820000 0x00 0x20000>, + <0x00 0x4aa40000 0x00 0x20000>, + <0x00 0x4bc00000 0x00 0x100000>; + reg-names = "gcfg", "bchanrt", "rchanrt", "tchanrt", "ringrt"; + msi-parent = <&inta_main_dmss>; + #dma-cells = <3>; + + ti,sci = <&dmsc>; + ti,sci-dev-id = <26>; + ti,sci-rm-range-bchan = <0x20>; /* BLOCK_COPY_CHAN */ + ti,sci-rm-range-rchan = <0x21>; /* SPLIT_TR_RX_CHAN */ + ti,sci-rm-range-tchan = <0x22>; /* SPLIT_TR_TX_CHAN */ + }; + + main_pktdma: dma-controller@485c0000 { + compatible = "ti,am64-dmss-pktdma"; + reg = <0x00 0x485c0000 0x00 0x100>, + <0x00 0x4a800000 0x00 0x20000>, + <0x00 0x4aa00000 0x00 0x40000>, + <0x00 0x4b800000 0x00 0x400000>; + reg-names = "gcfg", "rchanrt", "tchanrt", "ringrt"; + msi-parent = <&inta_main_dmss>; + #dma-cells = <2>; + + ti,sci = <&dmsc>; + ti,sci-dev-id = <30>; + ti,sci-rm-range-tchan = <0x23>, /* UNMAPPED_TX_CHAN */ + <0x24>, /* CPSW_TX_CHAN */ + <0x25>, /* SAUL_TX_0_CHAN */ + <0x26>; /* SAUL_TX_1_CHAN */ + ti,sci-rm-range-tflow = <0x10>, /* RING_UNMAPPED_TX_CHAN */ + <0x11>, /* RING_CPSW_TX_CHAN */ + <0x12>, /* RING_SAUL_TX_0_CHAN */ + <0x13>; /* RING_SAUL_TX_1_CHAN */ + ti,sci-rm-range-rchan = <0x29>, /* UNMAPPED_RX_CHAN */ + <0x2b>, /* CPSW_RX_CHAN */ + <0x2d>, /* SAUL_RX_0_CHAN */ + <0x2f>, /* SAUL_RX_1_CHAN */ + <0x31>, /* SAUL_RX_2_CHAN */ + <0x33>; /* SAUL_RX_3_CHAN */ + ti,sci-rm-range-rflow = <0x2a>, /* FLOW_UNMAPPED_RX_CHAN */ + <0x2c>, /* FLOW_CPSW_RX_CHAN */ + <0x2e>, /* FLOW_SAUL_RX_0/1_CHAN */ + <0x32>; /* FLOW_SAUL_RX_2/3_CHAN */ + }; }; dmsc: system-controller@44043000 { @@ -203,6 +280,36 @@ clock-names = "fck"; }; + main_spi0: spi@20100000 { + compatible = "ti,am654-mcspi", "ti,omap4-mcspi"; + reg = <0x00 0x20100000 0x00 0x400>; + interrupts = <GIC_SPI 172 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + power-domains = <&k3_pds 141 TI_SCI_PD_EXCLUSIVE>; + clocks = <&k3_clks 172 0>; + }; + + main_spi1: spi@20110000 { + compatible = "ti,am654-mcspi","ti,omap4-mcspi"; + reg = <0x00 0x20110000 0x00 0x400>; + interrupts = <GIC_SPI 173 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + power-domains = <&k3_pds 142 TI_SCI_PD_EXCLUSIVE>; + clocks = <&k3_clks 173 0>; + }; + + main_spi2: spi@20120000 { + compatible = "ti,am654-mcspi","ti,omap4-mcspi"; + reg = <0x00 0x20120000 0x00 0x400>; + interrupts = <GIC_SPI 174 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + power-domains = <&k3_pds 143 TI_SCI_PD_EXCLUSIVE>; + clocks = <&k3_clks 174 0>; + }; + main_gpio_intr: interrupt-controller@a00000 { compatible = "ti,sci-intr"; reg = <0x00 0x00a00000 0x00 0x800>; @@ -249,6 +356,165 @@ clock-names = "gpio"; }; + sdhci0: mmc@fa10000 { + compatible = "ti,am62-sdhci"; + reg = <0x00 0x0fa10000 0x00 0x1000>, <0x00 0x0fa18000 0x00 0x400>; + interrupts = <GIC_SPI 133 IRQ_TYPE_LEVEL_HIGH>; + power-domains = <&k3_pds 57 TI_SCI_PD_EXCLUSIVE>; + clocks = <&k3_clks 57 5>, <&k3_clks 57 6>; + clock-names = "clk_ahb", "clk_xin"; + assigned-clocks = <&k3_clks 57 6>; + assigned-clock-parents = <&k3_clks 57 8>; + mmc-ddr-1_8v; + mmc-hs200-1_8v; + ti,trm-icp = <0x2>; + bus-width = <8>; + ti,clkbuf-sel = <0x7>; + ti,otap-del-sel-legacy = <0x0>; + ti,otap-del-sel-mmc-hs = <0x0>; + ti,otap-del-sel-ddr52 = <0x9>; + ti,otap-del-sel-hs200 = <0x6>; + }; + + sdhci1: mmc@fa00000 { + compatible = "ti,am62-sdhci"; + reg = <0x00 0x0fa00000 0x00 0x1000>, <0x00 0x0fa08000 0x00 0x400>; + interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>; + power-domains = <&k3_pds 58 TI_SCI_PD_EXCLUSIVE>; + clocks = <&k3_clks 58 5>, <&k3_clks 58 6>; + clock-names = "clk_ahb", "clk_xin"; + ti,trm-icp = <0x2>; + ti,otap-del-sel-legacy = <0x0>; + ti,otap-del-sel-sd-hs = <0x0>; + ti,otap-del-sel-sdr12 = <0xf>; + ti,otap-del-sel-sdr25 = <0xf>; + ti,otap-del-sel-sdr50 = <0xc>; + ti,otap-del-sel-sdr104 = <0x6>; + ti,otap-del-sel-ddr50 = <0x9>; + ti,itap-del-sel-legacy = <0x0>; + ti,itap-del-sel-sd-hs = <0x0>; + ti,itap-del-sel-sdr12 = <0x0>; + ti,itap-del-sel-sdr25 = <0x0>; + ti,clkbuf-sel = <0x7>; + bus-width = <4>; + }; + + sdhci2: mmc@fa20000 { + compatible = "ti,am62-sdhci"; + reg = <0x00 0x0fa20000 0x00 0x1000>, <0x00 0x0fa28000 0x00 0x400>; + interrupts = <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>; + power-domains = <&k3_pds 184 TI_SCI_PD_EXCLUSIVE>; + clocks = <&k3_clks 184 5>, <&k3_clks 184 6>; + clock-names = "clk_ahb", "clk_xin"; + ti,trm-icp = <0x2>; + ti,otap-del-sel-legacy = <0x0>; + ti,otap-del-sel-sd-hs = <0x0>; + ti,otap-del-sel-sdr12 = <0xf>; + ti,otap-del-sel-sdr25 = <0xf>; + ti,otap-del-sel-sdr50 = <0xc>; + ti,otap-del-sel-sdr104 = <0x6>; + ti,otap-del-sel-ddr50 = <0x9>; + ti,itap-del-sel-legacy = <0x0>; + ti,itap-del-sel-sd-hs = <0x0>; + ti,itap-del-sel-sdr12 = <0x0>; + ti,itap-del-sel-sdr25 = <0x0>; + ti,clkbuf-sel = <0x7>; + }; + + fss: bus@fc00000 { + compatible = "simple-bus"; + reg = <0x00 0x0fc00000 0x00 0x70000>; + #address-cells = <2>; + #size-cells = <2>; + ranges; + + ospi0: spi@fc40000 { + compatible = "ti,am654-ospi", "cdns,qspi-nor"; + reg = <0x00 0x0fc40000 0x00 0x100>, + <0x05 0x00000000 0x01 0x00000000>; + interrupts = <GIC_SPI 139 IRQ_TYPE_LEVEL_HIGH>; + cdns,fifo-depth = <256>; + cdns,fifo-width = <4>; + cdns,trigger-address = <0x0>; + clocks = <&k3_clks 75 7>; + assigned-clocks = <&k3_clks 75 7>; + assigned-clock-parents = <&k3_clks 75 8>; + assigned-clock-rates = <166666666>; + power-domains = <&k3_pds 75 TI_SCI_PD_EXCLUSIVE>; + #address-cells = <1>; + #size-cells = <0>; + }; + }; + + cpsw3g: ethernet@8000000 { + compatible = "ti,am642-cpsw-nuss"; + #address-cells = <2>; + #size-cells = <2>; + reg = <0x00 0x08000000 0x00 0x200000>; + reg-names = "cpsw_nuss"; + ranges = <0x00 0x00 0x00 0x08000000 0x00 0x200000>; + clocks = <&k3_clks 13 0>; + assigned-clocks = <&k3_clks 13 3>; + assigned-clock-parents = <&k3_clks 13 11>; + clock-names = "fck"; + power-domains = <&k3_pds 13 TI_SCI_PD_EXCLUSIVE>; + + dmas = <&main_pktdma 0xc600 15>, + <&main_pktdma 0xc601 15>, + <&main_pktdma 0xc602 15>, + <&main_pktdma 0xc603 15>, + <&main_pktdma 0xc604 15>, + <&main_pktdma 0xc605 15>, + <&main_pktdma 0xc606 15>, + <&main_pktdma 0xc607 15>, + <&main_pktdma 0x4600 15>; + dma-names = "tx0", "tx1", "tx2", "tx3", "tx4", "tx5", "tx6", + "tx7", "rx"; + + ethernet-ports { + #address-cells = <1>; + #size-cells = <0>; + + cpsw_port1: port@1 { + reg = <1>; + ti,mac-only; + label = "port1"; + phys = <&phy_gmii_sel 1>; + mac-address = [00 00 00 00 00 00]; + ti,syscon-efuse = <&wkup_conf 0x200>; + }; + + cpsw_port2: port@2 { + reg = <2>; + ti,mac-only; + label = "port2"; + phys = <&phy_gmii_sel 2>; + mac-address = [00 00 00 00 00 00]; + }; + }; + + cpsw3g_mdio: mdio@f00 { + compatible = "ti,cpsw-mdio","ti,davinci_mdio"; + reg = <0x00 0xf00 0x00 0x100>; + #address-cells = <1>; + #size-cells = <0>; + clocks = <&k3_clks 13 0>; + clock-names = "fck"; + bus_freq = <1000000>; + }; + + cpts@3d000 { + compatible = "ti,j721e-cpts"; + reg = <0x00 0x3d000 0x00 0x400>; + clocks = <&k3_clks 13 3>; + clock-names = "cpts"; + interrupts-extended = <&gic500 GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "cpts"; + ti,cpts-ext-ts-inputs = <4>; + ti,cpts-periodic-outputs = <2>; + }; + }; + hwspinlock: spinlock@2a000000 { compatible = "ti,am64-hwspinlock"; reg = <0x00 0x2a000000 0x00 0x1000>; @@ -264,4 +530,45 @@ ti,mbox-num-users = <4>; ti,mbox-num-fifos = <16>; }; + + ecap0: pwm@23100000 { + compatible = "ti,am3352-ecap"; + #pwm-cells = <3>; + reg = <0x00 0x23100000 0x00 0x100>; + power-domains = <&k3_pds 51 TI_SCI_PD_EXCLUSIVE>; + clocks = <&k3_clks 51 0>; + clock-names = "fck"; + }; + + ecap1: pwm@23110000 { + compatible = "ti,am3352-ecap"; + #pwm-cells = <3>; + reg = <0x00 0x23110000 0x00 0x100>; + power-domains = <&k3_pds 52 TI_SCI_PD_EXCLUSIVE>; + clocks = <&k3_clks 52 0>; + clock-names = "fck"; + }; + + ecap2: pwm@23120000 { + compatible = "ti,am3352-ecap"; + #pwm-cells = <3>; + reg = <0x00 0x23120000 0x00 0x100>; + power-domains = <&k3_pds 53 TI_SCI_PD_EXCLUSIVE>; + clocks = <&k3_clks 53 0>; + clock-names = "fck"; + }; + + main_mcan0: can@20701000 { + compatible = "bosch,m_can"; + reg = <0x00 0x20701000 0x00 0x200>, + <0x00 0x20708000 0x00 0x8000>; + reg-names = "m_can", "message_ram"; + power-domains = <&k3_pds 98 TI_SCI_PD_EXCLUSIVE>; + clocks = <&k3_clks 98 6>, <&k3_clks 98 1>; + clock-names = "hclk", "cclk"; + interrupts = <GIC_SPI 155 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 156 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "int0", "int1"; + bosch,mram-cfg = <0x0 128 64 64 64 64 32 32>; + }; }; diff --git a/arch/arm64/boot/dts/ti/k3-am62-mcu.dtsi b/arch/arm64/boot/dts/ti/k3-am62-mcu.dtsi index 9d210d55fc71..f56c803560f2 100644 --- a/arch/arm64/boot/dts/ti/k3-am62-mcu.dtsi +++ b/arch/arm64/boot/dts/ti/k3-am62-mcu.dtsi @@ -33,4 +33,52 @@ clocks = <&k3_clks 106 2>; clock-names = "fck"; }; + + mcu_spi0: spi@4b00000 { + compatible = "ti,am654-mcspi", "ti,omap4-mcspi"; + reg = <0x00 0x04b00000 0x00 0x400>; + interrupts = <GIC_SPI 176 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + power-domains = <&k3_pds 147 TI_SCI_PD_EXCLUSIVE>; + clocks = <&k3_clks 147 0>; + }; + + mcu_spi1: spi@4b10000 { + compatible = "ti,am654-mcspi","ti,omap4-mcspi"; + reg = <0x00 0x04b10000 0x00 0x400>; + interrupts = <GIC_SPI 177 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + power-domains = <&k3_pds 148 TI_SCI_PD_EXCLUSIVE>; + clocks = <&k3_clks 148 0>; + }; + + mcu_gpio_intr: interrupt-controller@4210000 { + compatible = "ti,sci-intr"; + reg = <0x00 0x04210000 0x00 0x200>; + ti,intr-trigger-type = <1>; + interrupt-controller; + interrupt-parent = <&gic500>; + #interrupt-cells = <1>; + ti,sci = <&dmsc>; + ti,sci-dev-id = <5>; + ti,interrupt-ranges = <0 104 4>; + }; + + mcu_gpio0: gpio@4201000 { + compatible = "ti,am64-gpio", "ti,keystone-gpio"; + reg = <0x00 0x4201000 0x00 0x100>; + gpio-controller; + #gpio-cells = <2>; + interrupt-parent = <&mcu_gpio_intr>; + interrupts = <30>, <31>; + interrupt-controller; + #interrupt-cells = <2>; + ti,ngpio = <24>; + ti,davinci-gpio-unbanked = <0>; + power-domains = <&k3_pds 79 TI_SCI_PD_EXCLUSIVE>; + clocks = <&k3_clks 79 0>; + clock-names = "gpio"; + }; }; diff --git a/arch/arm64/boot/dts/ti/k3-am62.dtsi b/arch/arm64/boot/dts/ti/k3-am62.dtsi index bc2997b18556..37fcbe7a3c33 100644 --- a/arch/arm64/boot/dts/ti/k3-am62.dtsi +++ b/arch/arm64/boot/dts/ti/k3-am62.dtsi @@ -66,6 +66,7 @@ <0x00 0x30200000 0x00 0x30200000 0x00 0x00010000>, /* DSS */ <0x00 0x31000000 0x00 0x31000000 0x00 0x00050000>, /* USB0 DWC3 Core window */ <0x00 0x31100000 0x00 0x31100000 0x00 0x00050000>, /* USB1 DWC3 Core window */ + <0x00 0x40900000 0x00 0x40900000 0x00 0x00030000>, /* SA3UL */ <0x00 0x43600000 0x00 0x43600000 0x00 0x00010000>, /* SA3 sproxy data */ <0x00 0x44043000 0x00 0x44043000 0x00 0x00000fe0>, /* TI SCI DEBUG */ <0x00 0x44860000 0x00 0x44860000 0x00 0x00040000>, /* SA3 sproxy config */ diff --git a/arch/arm64/boot/dts/ti/k3-am625-sk.dts b/arch/arm64/boot/dts/ti/k3-am625-sk.dts index 0de4113ccd5d..39fb1d763037 100644 --- a/arch/arm64/boot/dts/ti/k3-am625-sk.dts +++ b/arch/arm64/boot/dts/ti/k3-am625-sk.dts @@ -9,6 +9,7 @@ #include <dt-bindings/leds/common.h> #include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/net/ti-dp83867.h> #include "k3-am625.dtsi" / { @@ -17,6 +18,12 @@ aliases { serial2 = &main_uart0; + mmc0 = &sdhci0; + mmc1 = &sdhci1; + mmc2 = &sdhci2; + spi0 = &ospi0; + ethernet0 = &cpsw_port1; + ethernet1 = &cpsw_port2; }; chosen { @@ -87,6 +94,33 @@ regulator-boot-on; }; + vdd_mmc1: regulator-3 { + /* TPS22918DBVR */ + compatible = "regulator-fixed"; + regulator-name = "vdd_mmc1"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-boot-on; + enable-active-high; + vin-supply = <&vcc_3v3_sys>; + gpio = <&exp1 3 GPIO_ACTIVE_HIGH>; + }; + + vdd_sd_dv: regulator-4 { + /* Output of TLV71033 */ + compatible = "regulator-gpio"; + regulator-name = "tlv71033"; + pinctrl-names = "default"; + pinctrl-0 = <&vdd_sd_dv_pins_default>; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + regulator-boot-on; + vin-supply = <&vcc_5v0>; + gpios = <&main_gpio0 31 GPIO_ACTIVE_HIGH>; + states = <1800000 0x0>, + <3300000 0x1>; + }; + leds { compatible = "gpio-leds"; pinctrl-names = "default"; @@ -124,11 +158,114 @@ >; }; + main_i2c2_pins_default: main-i2c2-pins-default { + pinctrl-single,pins = < + AM62X_IOPAD(0x0b0, PIN_INPUT_PULLUP, 1) /* (K22) GPMC0_CSn2.I2C2_SCL */ + AM62X_IOPAD(0x0b4, PIN_INPUT_PULLUP, 1) /* (K24) GPMC0_CSn3.I2C2_SDA */ + >; + }; + + main_mmc0_pins_default: main-mmc0-pins-default { + pinctrl-single,pins = < + AM62X_IOPAD(0x220, PIN_INPUT, 0) /* (Y3) MMC0_CMD */ + AM62X_IOPAD(0x218, PIN_INPUT, 0) /* (AB1) MMC0_CLK */ + AM62X_IOPAD(0x214, PIN_INPUT, 0) /* (AA2) MMC0_DAT0 */ + AM62X_IOPAD(0x210, PIN_INPUT, 0) /* (AA1) MMC0_DAT1 */ + AM62X_IOPAD(0x20c, PIN_INPUT, 0) /* (AA3) MMC0_DAT2 */ + AM62X_IOPAD(0x208, PIN_INPUT, 0) /* (Y4) MMC0_DAT3 */ + AM62X_IOPAD(0x204, PIN_INPUT, 0) /* (AB2) MMC0_DAT4 */ + AM62X_IOPAD(0x200, PIN_INPUT, 0) /* (AC1) MMC0_DAT5 */ + AM62X_IOPAD(0x1fc, PIN_INPUT, 0) /* (AD2) MMC0_DAT6 */ + AM62X_IOPAD(0x1f8, PIN_INPUT, 0) /* (AC2) MMC0_DAT7 */ + >; + }; + + main_mmc1_pins_default: main-mmc1-pins-default { + pinctrl-single,pins = < + AM62X_IOPAD(0x23c, PIN_INPUT, 0) /* (A21) MMC1_CMD */ + AM62X_IOPAD(0x234, PIN_INPUT, 0) /* (B22) MMC1_CLK */ + AM62X_IOPAD(0x230, PIN_INPUT, 0) /* (A22) MMC1_DAT0 */ + AM62X_IOPAD(0x22c, PIN_INPUT, 0) /* (B21) MMC1_DAT1 */ + AM62X_IOPAD(0x228, PIN_INPUT, 0) /* (C21) MMC1_DAT2 */ + AM62X_IOPAD(0x224, PIN_INPUT, 0) /* (D22) MMC1_DAT3 */ + AM62X_IOPAD(0x240, PIN_INPUT, 0) /* (D17) MMC1_SDCD */ + >; + }; + usr_led_pins_default: usr-led-pins-default { pinctrl-single,pins = < AM62X_IOPAD(0x244, PIN_OUTPUT, 7) /* (C17) MMC1_SDWP.GPIO1_49 */ >; }; + + main_mdio1_pins_default: main-mdio1-pins-default { + pinctrl-single,pins = < + AM62X_IOPAD(0x160, PIN_OUTPUT, 0) /* (AD24) MDIO0_MDC */ + AM62X_IOPAD(0x15c, PIN_INPUT, 0) /* (AB22) MDIO0_MDIO */ + >; + }; + + main_rgmii1_pins_default: main-rgmii1-pins-default { + pinctrl-single,pins = < + AM62X_IOPAD(0x14c, PIN_INPUT, 0) /* (AB17) RGMII1_RD0 */ + AM62X_IOPAD(0x150, PIN_INPUT, 0) /* (AC17) RGMII1_RD1 */ + AM62X_IOPAD(0x154, PIN_INPUT, 0) /* (AB16) RGMII1_RD2 */ + AM62X_IOPAD(0x158, PIN_INPUT, 0) /* (AA15) RGMII1_RD3 */ + AM62X_IOPAD(0x148, PIN_INPUT, 0) /* (AD17) RGMII1_RXC */ + AM62X_IOPAD(0x144, PIN_INPUT, 0) /* (AE17) RGMII1_RX_CTL */ + AM62X_IOPAD(0x134, PIN_OUTPUT, 0) /* (AE20) RGMII1_TD0 */ + AM62X_IOPAD(0x138, PIN_OUTPUT, 0) /* (AD20) RGMII1_TD1 */ + AM62X_IOPAD(0x13c, PIN_OUTPUT, 0) /* (AE18) RGMII1_TD2 */ + AM62X_IOPAD(0x140, PIN_OUTPUT, 0) /* (AD18) RGMII1_TD3 */ + AM62X_IOPAD(0x130, PIN_OUTPUT, 0) /* (AE19) RGMII1_TXC */ + AM62X_IOPAD(0x12c, PIN_OUTPUT, 0) /* (AD19) RGMII1_TX_CTL */ + >; + }; + + main_rgmii2_pins_default: main-rgmii2-pins-default { + pinctrl-single,pins = < + AM62X_IOPAD(0x184, PIN_INPUT, 0) /* (AE23) RGMII2_RD0 */ + AM62X_IOPAD(0x188, PIN_INPUT, 0) /* (AB20) RGMII2_RD1 */ + AM62X_IOPAD(0x18c, PIN_INPUT, 0) /* (AC21) RGMII2_RD2 */ + AM62X_IOPAD(0x190, PIN_INPUT, 0) /* (AE22) RGMII2_RD3 */ + AM62X_IOPAD(0x180, PIN_INPUT, 0) /* (AD23) RGMII2_RXC */ + AM62X_IOPAD(0x17c, PIN_INPUT, 0) /* (AD22) RGMII2_RX_CTL */ + AM62X_IOPAD(0x16c, PIN_OUTPUT, 0) /* (Y18) RGMII2_TD0 */ + AM62X_IOPAD(0x170, PIN_OUTPUT, 0) /* (AA18) RGMII2_TD1 */ + AM62X_IOPAD(0x174, PIN_OUTPUT, 0) /* (AD21) RGMII2_TD2 */ + AM62X_IOPAD(0x178, PIN_OUTPUT, 0) /* (AC20) RGMII2_TD3 */ + AM62X_IOPAD(0x168, PIN_OUTPUT, 0) /* (AE21) RGMII2_TXC */ + AM62X_IOPAD(0x164, PIN_OUTPUT, 0) /* (AA19) RGMII2_TX_CTL */ + >; + }; + + ospi0_pins_default: ospi0-pins-default { + pinctrl-single,pins = < + AM62X_IOPAD(0x000, PIN_OUTPUT, 0) /* (H24) OSPI0_CLK */ + AM62X_IOPAD(0x02c, PIN_OUTPUT, 0) /* (F23) OSPI0_CSn0 */ + AM62X_IOPAD(0x00c, PIN_INPUT, 0) /* (E25) OSPI0_D0 */ + AM62X_IOPAD(0x010, PIN_INPUT, 0) /* (G24) OSPI0_D1 */ + AM62X_IOPAD(0x014, PIN_INPUT, 0) /* (F25) OSPI0_D2 */ + AM62X_IOPAD(0x018, PIN_INPUT, 0) /* (F24) OSPI0_D3 */ + AM62X_IOPAD(0x01c, PIN_INPUT, 0) /* (J23) OSPI0_D4 */ + AM62X_IOPAD(0x020, PIN_INPUT, 0) /* (J25) OSPI0_D5 */ + AM62X_IOPAD(0x024, PIN_INPUT, 0) /* (H25) OSPI0_D6 */ + AM62X_IOPAD(0x028, PIN_INPUT, 0) /* (J22) OSPI0_D7 */ + AM62X_IOPAD(0x008, PIN_INPUT, 0) /* (J24) OSPI0_DQS */ + >; + }; + + vdd_sd_dv_pins_default: vdd-sd-dv-pins-default { + pinctrl-single,pins = < + AM62X_IOPAD(0x07c, PIN_OUTPUT, 7) /* (P25) GPMC0_CLK.GPIO0_31 */ + >; + }; + + main_gpio1_ioexp_intr_pins_default: main-gpio1-ioexp-intr-pins-default { + pinctrl-single,pins = < + AM62X_IOPAD(0x01d4, PIN_INPUT, 7) /* (B15) UART0_RTSn.GPIO1_23 */ + >; + }; }; &wkup_uart0 { @@ -188,6 +325,33 @@ pinctrl-names = "default"; pinctrl-0 = <&main_i2c1_pins_default>; clock-frequency = <400000>; + + exp1: gpio@22 { + compatible = "ti,tca6424"; + reg = <0x22>; + gpio-controller; + #gpio-cells = <2>; + gpio-line-names = "GPIO_CPSW2_RST", "GPIO_CPSW1_RST", + "PRU_DETECT", "MMC1_SD_EN", + "VPP_LDO_EN", "EXP_PS_3V3_En", + "EXP_PS_5V0_En", "EXP_HAT_DETECT", + "GPIO_AUD_RSTn", "GPIO_eMMC_RSTn", + "UART1_FET_BUF_EN", "WL_LT_EN", + "GPIO_HDMI_RSTn", "CSI_GPIO1", + "CSI_GPIO2", "PRU_3V3_EN", + "HDMI_INTn", "TEST_GPIO2", + "MCASP1_FET_EN", "MCASP1_BUF_BT_EN", + "MCASP1_FET_SEL", "UART1_FET_SEL", + "TSINT#", "IO_EXP_TEST_LED"; + + interrupt-parent = <&main_gpio1>; + interrupts = <23 IRQ_TYPE_EDGE_FALLING>; + interrupt-controller; + #interrupt-cells = <2>; + + pinctrl-names = "default"; + pinctrl-0 = <&main_gpio1_ioexp_intr_pins_default>; + }; }; &main_i2c2 { @@ -198,9 +362,134 @@ status = "disabled"; }; +&sdhci0 { + pinctrl-names = "default"; + pinctrl-0 = <&main_mmc0_pins_default>; + ti,driver-strength-ohm = <50>; + disable-wp; +}; + +&sdhci1 { + /* SD/MMC */ + vmmc-supply = <&vdd_mmc1>; + vqmmc-supply = <&vdd_sd_dv>; + pinctrl-names = "default"; + pinctrl-0 = <&main_mmc1_pins_default>; + ti,driver-strength-ohm = <50>; + disable-wp; +}; + +&cpsw3g { + pinctrl-names = "default"; + pinctrl-0 = <&main_mdio1_pins_default + &main_rgmii1_pins_default + &main_rgmii2_pins_default>; +}; + +&cpsw_port1 { + phy-mode = "rgmii-rxid"; + phy-handle = <&cpsw3g_phy0>; +}; + +&cpsw_port2 { + phy-mode = "rgmii-rxid"; + phy-handle = <&cpsw3g_phy1>; +}; + +&cpsw3g_mdio { + cpsw3g_phy0: ethernet-phy@0 { + reg = <0>; + ti,rx-internal-delay = <DP83867_RGMIIDCTL_2_00_NS>; + ti,fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_4_B_NIB>; + ti,min-output-impedance; + }; + + cpsw3g_phy1: ethernet-phy@1 { + reg = <1>; + ti,rx-internal-delay = <DP83867_RGMIIDCTL_2_00_NS>; + ti,fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_4_B_NIB>; + ti,min-output-impedance; + }; +}; + &mailbox0_cluster0 { mbox_m4_0: mbox-m4-0 { ti,mbox-rx = <0 0 0>; ti,mbox-tx = <1 0 0>; }; }; + +&ospi0 { + pinctrl-names = "default"; + pinctrl-0 = <&ospi0_pins_default>; + + flash@0{ + compatible = "jedec,spi-nor"; + reg = <0x0>; + spi-tx-bus-width = <8>; + spi-rx-bus-width = <8>; + spi-max-frequency = <25000000>; + cdns,tshsl-ns = <60>; + cdns,tsd2d-ns = <60>; + cdns,tchsh-ns = <60>; + cdns,tslch-ns = <60>; + cdns,read-delay = <4>; + + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { + label = "ospi.tiboot3"; + reg = <0x0 0x80000>; + }; + + partition@80000 { + label = "ospi.tispl"; + reg = <0x80000 0x200000>; + }; + + partition@280000 { + label = "ospi.u-boot"; + reg = <0x280000 0x400000>; + }; + + partition@680000 { + label = "ospi.env"; + reg = <0x680000 0x40000>; + }; + + partition@6c0000 { + label = "ospi.env.backup"; + reg = <0x6c0000 0x40000>; + }; + + partition@800000 { + label = "ospi.rootfs"; + reg = <0x800000 0x37c0000>; + }; + + partition@3fc0000 { + label = "ospi.phypattern"; + reg = <0x3fc0000 0x40000>; + }; + }; + }; +}; + +&ecap0 { + status = "disabled"; +}; + +&ecap1 { + status = "disabled"; +}; + +&ecap2 { + status = "disabled"; +}; + +&main_mcan0 { + status = "disabled"; +}; diff --git a/arch/arm64/boot/dts/ti/k3-am64-mcu.dtsi b/arch/arm64/boot/dts/ti/k3-am64-mcu.dtsi index 2bb5c9ff172c..02d4285acbb8 100644 --- a/arch/arm64/boot/dts/ti/k3-am64-mcu.dtsi +++ b/arch/arm64/boot/dts/ti/k3-am64-mcu.dtsi @@ -10,7 +10,6 @@ compatible = "ti,am64-uart", "ti,am654-uart"; reg = <0x00 0x04a00000 0x00 0x100>; interrupts = <GIC_SPI 185 IRQ_TYPE_LEVEL_HIGH>; - clock-frequency = <48000000>; current-speed = <115200>; power-domains = <&k3_pds 149 TI_SCI_PD_EXCLUSIVE>; clocks = <&k3_clks 149 0>; @@ -21,7 +20,6 @@ compatible = "ti,am64-uart", "ti,am654-uart"; reg = <0x00 0x04a10000 0x00 0x100>; interrupts = <GIC_SPI 186 IRQ_TYPE_LEVEL_HIGH>; - clock-frequency = <48000000>; current-speed = <115200>; power-domains = <&k3_pds 160 TI_SCI_PD_EXCLUSIVE>; clocks = <&k3_clks 160 0>; diff --git a/arch/arm64/boot/dts/ti/k3-am642-sk.dts b/arch/arm64/boot/dts/ti/k3-am642-sk.dts index 1d7db8bf3a5c..59f506cbd275 100644 --- a/arch/arm64/boot/dts/ti/k3-am642-sk.dts +++ b/arch/arm64/boot/dts/ti/k3-am642-sk.dts @@ -125,6 +125,31 @@ vin-supply = <&vcc_3v3_sys>; gpio = <&exp1 3 GPIO_ACTIVE_HIGH>; }; + + com8_ls_en: regulator-1 { + compatible = "regulator-fixed"; + regulator-name = "com8_ls_en"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + regulator-boot-on; + pinctrl-0 = <&main_com8_ls_en_pins_default>; + pinctrl-names = "default"; + gpio = <&main_gpio0 62 GPIO_ACTIVE_LOW>; + }; + + wlan_en: regulator-2 { + /* output of SN74AVC4T245RSVR */ + compatible = "regulator-fixed"; + regulator-name = "wlan_en"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + enable-active-high; + pinctrl-0 = <&main_wlan_en_pins_default>; + pinctrl-names = "default"; + vin-supply = <&com8_ls_en>; + gpio = <&main_gpio0 48 GPIO_ACTIVE_HIGH>; + }; }; &main_pmx0 { @@ -216,6 +241,23 @@ AM64X_IOPAD(0x0270, PIN_INPUT, 0) /* (D18) ECAP0_IN_APWM_OUT */ >; }; + main_wlan_en_pins_default: main-wlan-en-pins-default { + pinctrl-single,pins = < + AM64X_IOPAD(0x00c4, PIN_OUTPUT_PULLUP, 7) /* (V8) GPIO0_48 */ + >; + }; + + main_com8_ls_en_pins_default: main-com8-ls-en-pins-default { + pinctrl-single,pins = < + AM64X_IOPAD(0x00fc, PIN_OUTPUT, 7) /* (U7) PRG1_PRU0_GPO17.GPIO0_62 */ + >; + }; + + main_wlan_pins_default: main-wlan-pins-default { + pinctrl-single,pins = < + AM64X_IOPAD(0x00bc, PIN_INPUT, 7) /* (U8) GPIO0_46 */ + >; + }; }; &mcu_uart0 { @@ -293,6 +335,26 @@ status = "reserved"; }; +&sdhci0 { + vmmc-supply = <&wlan_en>; + bus-width = <4>; + non-removable; + cap-power-off-card; + keep-power-in-suspend; + ti,driver-strength-ohm = <50>; + + #address-cells = <1>; + #size-cells = <0>; + wlcore: wlcore@2 { + compatible = "ti,wl1837"; + reg = <2>; + pinctrl-0 = <&main_wlan_pins_default>; + pinctrl-names = "default"; + interrupt-parent = <&main_gpio0>; + interrupts = <46 IRQ_TYPE_EDGE_FALLING>; + }; +}; + &sdhci1 { /* SD/MMC */ vmmc-supply = <&vdd_mmc1>; diff --git a/arch/arm64/boot/dts/ti/k3-j721e-common-proc-board.dts b/arch/arm64/boot/dts/ti/k3-j721e-common-proc-board.dts index f5ca8e26ed99..2bc26a296496 100644 --- a/arch/arm64/boot/dts/ti/k3-j721e-common-proc-board.dts +++ b/arch/arm64/boot/dts/ti/k3-j721e-common-proc-board.dts @@ -148,6 +148,28 @@ pinctrl-0 = <&main_mcan2_gpio_pins_default>; standby-gpios = <&main_gpio0 127 GPIO_ACTIVE_HIGH>; }; + + dp_pwr_3v3: regulator-dp-pwr { + compatible = "regulator-fixed"; + regulator-name = "dp-pwr"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + gpio = <&exp4 0 GPIO_ACTIVE_HIGH>; /* P0 - DP0_PWR_SW_EN */ + enable-active-high; + }; + + dp0: connector { + compatible = "dp-connector"; + label = "DP0"; + type = "full-size"; + dp-pwr-supply = <&dp_pwr_3v3>; + + port { + dp_connector_in: endpoint { + remote-endpoint = <&dp0_out>; + }; + }; + }; }; &main_pmx0 { @@ -190,6 +212,12 @@ >; }; + dp0_pins_default: dp0-pins-default { + pinctrl-single,pins = < + J721E_IOPAD(0x1c4, PIN_INPUT, 5) /* SPI0_CS1.DP0_HPD */ + >; + }; + main_i2c1_exp4_pins_default: main-i2c1-exp4-pins-default { pinctrl-single,pins = < J721E_IOPAD(0x230, PIN_INPUT, 7) /* (U2) ECAP0_IN_APWM_OUT.GPIO1_11 */ @@ -658,6 +686,33 @@ <&k3_clks 152 18>; /* PLL23_HSDIV0 */ }; +&dss_ports { + port { + dpi0_out: endpoint { + remote-endpoint = <&dp0_in>; + }; + }; +}; + +&dp0_ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + dp0_in: endpoint { + remote-endpoint = <&dpi0_out>; + }; + }; + + port@4 { + reg = <4>; + dp0_out: endpoint { + remote-endpoint = <&dp_connector_in>; + }; + }; +}; + &mcasp0 { status = "disabled"; }; @@ -793,6 +848,24 @@ }; }; +&serdes4 { + torrent_phy_dp: phy@0 { + reg = <0>; + resets = <&serdes_wiz4 1>; + cdns,phy-type = <PHY_TYPE_DP>; + cdns,num-lanes = <4>; + cdns,max-bit-rate = <5400>; + #phy-cells = <0>; + }; +}; + +&mhdp { + phys = <&torrent_phy_dp>; + phy-names = "dpphy"; + pinctrl-names = "default"; + pinctrl-0 = <&dp0_pins_default>; +}; + &pcie0_rc { reset-gpios = <&exp1 6 GPIO_ACTIVE_HIGH>; phys = <&serdes0_pcie_link>; @@ -843,10 +916,6 @@ status = "disabled"; }; -&dss { - status = "disabled"; -}; - &icssg0_mdio { status = "disabled"; }; diff --git a/arch/arm64/boot/dts/ti/k3-j721e-main.dtsi b/arch/arm64/boot/dts/ti/k3-j721e-main.dtsi index db0669985e42..43b6cf5791ee 100644 --- a/arch/arm64/boot/dts/ti/k3-j721e-main.dtsi +++ b/arch/arm64/boot/dts/ti/k3-j721e-main.dtsi @@ -5,6 +5,7 @@ * Copyright (C) 2016-2020 Texas Instruments Incorporated - https://www.ti.com/ */ #include <dt-bindings/phy/phy.h> +#include <dt-bindings/phy/phy-ti.h> #include <dt-bindings/mux/mux.h> #include <dt-bindings/mux/ti-serdes.h> @@ -789,6 +790,47 @@ #size-cells = <2>; }; + serdes_wiz4: wiz@5050000 { + compatible = "ti,am64-wiz-10g"; + #address-cells = <1>; + #size-cells = <1>; + power-domains = <&k3_pds 297 TI_SCI_PD_EXCLUSIVE>; + clocks = <&k3_clks 297 1>, <&k3_clks 297 9>, <&cmn_refclk>; + clock-names = "fck", "core_ref_clk", "ext_ref_clk"; + assigned-clocks = <&k3_clks 297 9>; + assigned-clock-parents = <&k3_clks 297 10>; + assigned-clock-rates = <19200000>; + num-lanes = <4>; + #reset-cells = <1>; + #clock-cells = <1>; + ranges = <0x05050000 0x00 0x05050000 0x010000>, + <0x0a030a00 0x00 0x0a030a00 0x40>; + + serdes4: serdes@5050000 { + /* + * Note: we also map DPTX PHY registers as the Torrent + * needs to manage those. + */ + compatible = "ti,j721e-serdes-10g"; + reg = <0x05050000 0x010000>, + <0x0a030a00 0x40>; /* DPTX PHY */ + reg-names = "torrent_phy", "dptx_phy"; + + resets = <&serdes_wiz4 0>; + reset-names = "torrent_reset"; + clocks = <&serdes_wiz4 TI_WIZ_PLL0_REFCLK>; + clock-names = "refclk"; + assigned-clocks = <&serdes_wiz4 TI_WIZ_PLL0_REFCLK>, + <&serdes_wiz4 TI_WIZ_PLL1_REFCLK>, + <&serdes_wiz4 TI_WIZ_REFCLK_DIG>; + assigned-clock-parents = <&k3_clks 297 9>, + <&k3_clks 297 9>, + <&k3_clks 297 9>; + #address-cells = <1>; + #size-cells = <0>; + }; + }; + main_uart0: serial@2800000 { compatible = "ti,j721e-uart", "ti,am654-uart"; reg = <0x00 0x02800000 0x00 0x100>; @@ -1267,6 +1309,37 @@ }; }; + mhdp: dp-bridge@a000000 { + compatible = "ti,j721e-mhdp8546"; + /* + * Note: we do not map DPTX PHY area, as that is handled by + * the PHY driver. + */ + reg = <0x00 0x0a000000 0x00 0x030a00>, /* DSS_EDP0_V2A_CORE_VP_REGS_APB */ + <0x00 0x04f40000 0x00 0x20>; /* DSS_EDP0_INTG_CFG_VP */ + reg-names = "mhdptx", "j721e-intg"; + + clocks = <&k3_clks 151 36>; + + interrupt-parent = <&gic500>; + interrupts = <GIC_SPI 614 IRQ_TYPE_LEVEL_HIGH>; + + power-domains = <&k3_pds 151 TI_SCI_PD_EXCLUSIVE>; + + dp0_ports: ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + }; + + port@4 { + reg = <4>; + }; + }; + }; + dss: dss@4a00000 { compatible = "ti,j721e-dss"; reg = @@ -1317,8 +1390,6 @@ "common_s2"; dss_ports: ports { - #address-cells = <1>; - #size-cells = <0>; }; }; diff --git a/arch/arm64/boot/dts/ti/k3-j721e-sk.dts b/arch/arm64/boot/dts/ti/k3-j721e-sk.dts index f25d85169e0d..80358cba6954 100644 --- a/arch/arm64/boot/dts/ti/k3-j721e-sk.dts +++ b/arch/arm64/boot/dts/ti/k3-j721e-sk.dts @@ -213,6 +213,71 @@ enable-active-high; }; + dp0: connector { + compatible = "dp-connector"; + label = "DP0"; + type = "full-size"; + dp-pwr-supply = <&dp_pwr_3v3>; + + port { + dp_connector_in: endpoint { + remote-endpoint = <&dp0_out>; + }; + }; + }; + + hdmi-connector { + compatible = "hdmi-connector"; + label = "hdmi"; + type = "a"; + + pinctrl-names = "default"; + pinctrl-0 = <&hdmi_hpd_pins_default>; + + ddc-i2c-bus = <&main_i2c1>; + + /* HDMI_HPD */ + hpd-gpios = <&main_gpio1 0 GPIO_ACTIVE_HIGH>; + + port { + hdmi_connector_in: endpoint { + remote-endpoint = <&tfp410_out>; + }; + }; + }; + + dvi-bridge { + compatible = "ti,tfp410"; + + pinctrl-names = "default"; + pinctrl-0 = <&hdmi_pdn_pins_default>; + + powerdown-gpios = <&main_gpio0 127 GPIO_ACTIVE_LOW>; + ti,deskew = <0>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + tfp410_in: endpoint { + remote-endpoint = <&dpi1_out>; + pclk-sample = <1>; + }; + }; + + port@1 { + reg = <1>; + + tfp410_out: endpoint { + remote-endpoint = + <&hdmi_connector_in>; + }; + }; + }; + }; }; &main_pmx0 { @@ -317,6 +382,18 @@ >; }; + hdmi_hpd_pins_default: hdmi-hpd-pins-default { + pinctrl-single,pins = < + J721E_IOPAD(0x204, PIN_INPUT, 7) /* (AD5) UART1_RTSn.GPIO1_0 */ + >; + }; + + hdmi_pdn_pins_default: hdmi-pdn-pins-default { + pinctrl-single,pins = < + J721E_IOPAD(0x200, PIN_INPUT, 7) /* (AC4) UART1_CTSn.GPIO0_127 */ + >; + }; + /* Reset for M.2 E Key slot on PCIe0 */ ekey_reset_pins_default: ekey-reset-pns-pins-default { pinctrl-single,pins = < @@ -624,6 +701,24 @@ }; }; +&serdes4 { + torrent_phy_dp: phy@0 { + reg = <0>; + resets = <&serdes_wiz4 1>; + cdns,phy-type = <PHY_TYPE_DP>; + cdns,num-lanes = <4>; + cdns,max-bit-rate = <5400>; + #phy-cells = <0>; + }; +}; + +&mhdp { + phys = <&torrent_phy_dp>; + phy-names = "dpphy"; + pinctrl-names = "default"; + pinctrl-0 = <&dp0_pins_default>; +}; + &usbss0 { pinctrl-names = "default"; pinctrl-0 = <&main_usbss0_pins_default>; @@ -702,6 +797,46 @@ <&k3_clks 152 18>; /* DPI1_EXT_CLKSEL_OUT0 */ }; +&dss_ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + dpi0_out: endpoint { + remote-endpoint = <&dp0_in>; + }; + }; + + port@1 { + reg = <1>; + + dpi1_out: endpoint { + remote-endpoint = <&tfp410_in>; + }; + }; +}; + +&dp0_ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + dp0_in: endpoint { + remote-endpoint = <&dpi0_out>; + }; + }; + + port@4 { + reg = <4>; + dp0_out: endpoint { + remote-endpoint = <&dp_connector_in>; + }; + }; +}; + &mcasp0 { /* Unused */ status = "disabled"; @@ -836,10 +971,6 @@ status = "disabled"; }; -&dss { - status = "disabled"; -}; - &icssg0_mdio { status = "disabled"; }; diff --git a/arch/arm64/boot/dts/toshiba/tmpv7708-rm-mbrc.dts b/arch/arm64/boot/dts/toshiba/tmpv7708-rm-mbrc.dts index 9375b0faeea2..d209fdc98597 100644 --- a/arch/arm64/boot/dts/toshiba/tmpv7708-rm-mbrc.dts +++ b/arch/arm64/boot/dts/toshiba/tmpv7708-rm-mbrc.dts @@ -32,22 +32,16 @@ &uart0 { status = "okay"; - clocks = <&uart_clk>; - clock-names = "apb_pclk"; }; &uart1 { status = "okay"; - clocks = <&uart_clk>; - clock-names = "apb_pclk"; }; &piether { status = "okay"; phy-handle = <&phy0>; phy-mode = "rgmii-id"; - clocks = <&clk300mhz>, <&clk125mhz>; - clock-names = "stmmaceth", "phy_ref_clk"; mdio0 { #address-cells = <1>; @@ -62,7 +56,6 @@ &wdt { status = "okay"; - clocks = <&wdt_clk>; }; &gpio { @@ -79,6 +72,4 @@ &pcie { status = "okay"; - clocks = <&extclk100mhz>, <&clk600mhz>, <&clk25mhz>; - clock-names = "ref", "core", "aux"; }; diff --git a/arch/arm64/boot/dts/toshiba/tmpv7708-visrobo-vrb.dts b/arch/arm64/boot/dts/toshiba/tmpv7708-visrobo-vrb.dts index d0817463706e..ed7aa7e457b1 100644 --- a/arch/arm64/boot/dts/toshiba/tmpv7708-visrobo-vrb.dts +++ b/arch/arm64/boot/dts/toshiba/tmpv7708-visrobo-vrb.dts @@ -32,22 +32,16 @@ &uart0 { status = "okay"; - clocks = <&uart_clk>; - clock-names = "apb_pclk"; }; &uart1 { status = "okay"; - clocks = <&uart_clk>; - clock-names = "apb_pclk"; }; &piether { status = "okay"; phy-handle = <&phy0>; phy-mode = "rgmii-id"; - clocks = <&clk300mhz>, <&clk125mhz>; - clock-names = "stmmaceth", "phy_ref_clk"; mdio0 { #address-cells = <1>; diff --git a/arch/arm64/boot/dts/toshiba/tmpv7708-visrobo-vrc.dtsi b/arch/arm64/boot/dts/toshiba/tmpv7708-visrobo-vrc.dtsi index f0a93db6dde6..0c8321022a73 100644 --- a/arch/arm64/boot/dts/toshiba/tmpv7708-visrobo-vrc.dtsi +++ b/arch/arm64/boot/dts/toshiba/tmpv7708-visrobo-vrc.dtsi @@ -13,7 +13,6 @@ &wdt { status = "okay"; - clocks = <&wdt_clk>; }; &gpio { @@ -26,8 +25,6 @@ &spi0 { status = "okay"; - clocks = <&clk300mhz>, <&clk150mhz>; - clock-names = "sspclk", "apb_pclk"; mmc-slot@0 { compatible = "mmc-spi-slot"; @@ -40,5 +37,4 @@ &i2c0 { status = "okay"; - clocks = <&clk150mhz>; }; diff --git a/arch/arm64/boot/dts/toshiba/tmpv7708.dtsi b/arch/arm64/boot/dts/toshiba/tmpv7708.dtsi index 01d7ee61ad25..0fc32c036f30 100644 --- a/arch/arm64/boot/dts/toshiba/tmpv7708.dtsi +++ b/arch/arm64/boot/dts/toshiba/tmpv7708.dtsi @@ -7,6 +7,7 @@ * */ +#include <dt-bindings/clock/toshiba,tmpv770x.h> #include <dt-bindings/interrupt-controller/irq.h> #include <dt-bindings/interrupt-controller/arm-gic.h> @@ -128,47 +129,6 @@ <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>; }; - uart_clk: uart-clk { - compatible = "fixed-clock"; - clock-frequency = <150000000>; - #clock-cells = <0>; - }; - - clk25mhz: clk25mhz { - compatible = "fixed-clock"; - #clock-cells = <0>; - clock-frequency = <25000000>; - clock-output-names = "clk25mhz"; - }; - - clk125mhz: clk125mhz { - compatible = "fixed-clock"; - clock-frequency = <125000000>; - #clock-cells = <0>; - clock-output-names = "clk125mhz"; - }; - - clk150mhz: clk150mhz { - compatible = "fixed-clock"; - clock-frequency = <150000000>; - #clock-cells = <0>; - clock-output-names = "clk150mhz"; - }; - - clk300mhz: clk300mhz { - compatible = "fixed-clock"; - clock-frequency = <300000000>; - #clock-cells = <0>; - clock-output-names = "clk300mhz"; - }; - - clk600mhz: clk600mhz { - compatible = "fixed-clock"; - #clock-cells = <0>; - clock-frequency = <600000000>; - clock-output-names = "clk600mhz"; - }; - extclk100mhz: extclk100mhz { compatible = "fixed-clock"; #clock-cells = <0>; @@ -176,9 +136,9 @@ clock-output-names = "extclk100mhz"; }; - wdt_clk: wdt-clk { + osc2_clk: osc2-clk { compatible = "fixed-clock"; - clock-frequency = <150000000>; + clock-frequency = <20000000>; #clock-cells = <0>; }; @@ -216,12 +176,28 @@ interrupt-parent = <&gic>; }; + pipllct: clock-controller@24220000 { + compatible = "toshiba,tmpv7708-pipllct"; + reg = <0 0x24220000 0 0x820>; + #clock-cells = <1>; + clocks = <&osc2_clk>; + }; + + pismu: syscon@24200000 { + compatible = "toshiba,tmpv7708-pismu", "syscon"; + reg = <0 0x24200000 0 0x2140>; + #clock-cells = <1>; + #reset-cells = <1>; + }; + uart0: serial@28200000 { compatible = "arm,pl011", "arm,primecell"; reg = <0 0x28200000 0 0x1000>; interrupts = <GIC_SPI 133 IRQ_TYPE_LEVEL_HIGH>; pinctrl-names = "default"; pinctrl-0 = <&uart0_pins>; + clocks = <&pismu TMPV770X_CLK_PIUART0>; + clock-names = "apb_pclk"; status = "disabled"; }; @@ -231,6 +207,8 @@ interrupts = <GIC_SPI 134 IRQ_TYPE_LEVEL_HIGH>; pinctrl-names = "default"; pinctrl-0 = <&uart1_pins>; + clocks = <&pismu TMPV770X_CLK_PIUART1>; + clock-names = "apb_pclk"; status = "disabled"; }; @@ -240,6 +218,8 @@ interrupts = <GIC_SPI 135 IRQ_TYPE_LEVEL_HIGH>; pinctrl-names = "default"; pinctrl-0 = <&uart2_pins>; + clocks = <&pismu TMPV770X_CLK_PIUART2>; + clock-names = "apb_pclk"; status = "disabled"; }; @@ -249,6 +229,8 @@ interrupts = <GIC_SPI 136 IRQ_TYPE_LEVEL_HIGH>; pinctrl-names = "default"; pinctrl-0 = <&uart3_pins>; + clocks = <&pismu TMPV770X_CLK_PIUART2>; + clock-names = "apb_pclk"; status = "disabled"; }; @@ -261,6 +243,7 @@ clock-frequency = <400000>; #address-cells = <1>; #size-cells = <0>; + clocks = <&pismu TMPV770X_CLK_PII2C0>; status = "disabled"; }; @@ -273,6 +256,7 @@ clock-frequency = <400000>; #address-cells = <1>; #size-cells = <0>; + clocks = <&pismu TMPV770X_CLK_PII2C1>; status = "disabled"; }; @@ -285,6 +269,7 @@ clock-frequency = <400000>; #address-cells = <1>; #size-cells = <0>; + clocks = <&pismu TMPV770X_CLK_PII2C2>; status = "disabled"; }; @@ -297,6 +282,7 @@ clock-frequency = <400000>; #address-cells = <1>; #size-cells = <0>; + clocks = <&pismu TMPV770X_CLK_PII2C3>; status = "disabled"; }; @@ -309,6 +295,7 @@ clock-frequency = <400000>; #address-cells = <1>; #size-cells = <0>; + clocks = <&pismu TMPV770X_CLK_PII2C4>; status = "disabled"; }; @@ -321,6 +308,7 @@ clock-frequency = <400000>; #address-cells = <1>; #size-cells = <0>; + clocks = <&pismu TMPV770X_CLK_PII2C5>; status = "disabled"; }; @@ -333,6 +321,7 @@ clock-frequency = <400000>; #address-cells = <1>; #size-cells = <0>; + clocks = <&pismu TMPV770X_CLK_PII2C6>; status = "disabled"; }; @@ -345,6 +334,7 @@ clock-frequency = <400000>; #address-cells = <1>; #size-cells = <0>; + clocks = <&pismu TMPV770X_CLK_PII2C7>; status = "disabled"; }; @@ -357,6 +347,7 @@ clock-frequency = <400000>; #address-cells = <1>; #size-cells = <0>; + clocks = <&pismu TMPV770X_CLK_PII2C8>; status = "disabled"; }; @@ -369,6 +360,8 @@ num-cs = <1>; #address-cells = <1>; #size-cells = <0>; + clocks = <&pismu TMPV770X_CLK_PISPI1>; + clock-names = "apb_pclk"; status = "disabled"; }; @@ -381,6 +374,8 @@ num-cs = <1>; #address-cells = <1>; #size-cells = <0>; + clocks = <&pismu TMPV770X_CLK_PISPI1>; + clock-names = "apb_pclk"; status = "disabled"; }; @@ -393,6 +388,8 @@ num-cs = <1>; #address-cells = <1>; #size-cells = <0>; + clocks = <&pismu TMPV770X_CLK_PISPI2>; + clock-names = "apb_pclk"; status = "disabled"; }; @@ -405,6 +402,8 @@ num-cs = <1>; #address-cells = <1>; #size-cells = <0>; + clocks = <&pismu TMPV770X_CLK_PISPI3>; + clock-names = "apb_pclk"; status = "disabled"; }; @@ -417,6 +416,8 @@ num-cs = <1>; #address-cells = <1>; #size-cells = <0>; + clocks = <&pismu TMPV770X_CLK_PISPI4>; + clock-names = "apb_pclk"; status = "disabled"; }; @@ -429,6 +430,8 @@ num-cs = <1>; #address-cells = <1>; #size-cells = <0>; + clocks = <&pismu TMPV770X_CLK_PISPI5>; + clock-names = "apb_pclk"; status = "disabled"; }; @@ -441,6 +444,8 @@ num-cs = <1>; #address-cells = <1>; #size-cells = <0>; + clocks = <&pismu TMPV770X_CLK_PISPI6>; + clock-names = "apb_pclk"; status = "disabled"; }; @@ -452,12 +457,15 @@ snps,txpbl = <4>; snps,rxpbl = <4>; snps,tso; + clocks = <&pismu TMPV770X_CLK_PIETHER_BUS>, <&pismu TMPV770X_CLK_PIETHER_125M>; + clock-names = "stmmaceth", "phy_ref_clk"; status = "disabled"; }; wdt: wdt@28330000 { compatible = "toshiba,visconti-wdt"; reg = <0 0x28330000 0 0x1000>; + clocks = <&pismu TMPV770X_CLK_WDTCLK>; status = "disabled"; }; @@ -498,6 +506,8 @@ 0 0 0 3 &gic GIC_SPI 215 IRQ_TYPE_LEVEL_HIGH 0 0 0 4 &gic GIC_SPI 215 IRQ_TYPE_LEVEL_HIGH>; max-link-speed = <2>; + clocks = <&extclk100mhz>, <&pismu TMPV770X_CLK_PCIE_MSTR>, <&pismu TMPV770X_CLK_PCIE_AUX>; + clock-names = "ref", "core", "aux"; status = "disabled"; }; }; diff --git a/include/dt-bindings/clock/qcom,gcc-msm8998.h b/include/dt-bindings/clock/qcom,gcc-msm8998.h index 72c99e486d86..1badb4f9c58f 100644 --- a/include/dt-bindings/clock/qcom,gcc-msm8998.h +++ b/include/dt-bindings/clock/qcom,gcc-msm8998.h @@ -186,6 +186,10 @@ #define UFS_UNIPRO_CORE_CLK_SRC 177 #define GCC_MMSS_GPLL0_CLK 178 #define HMSS_GPLL0_CLK_SRC 179 +#define GCC_IM_SLEEP 180 +#define AGGRE2_SNOC_NORTH_AXI 181 +#define SSC_XO 182 +#define SSC_CNOC_AHBS_CLK 183 #define PCIE_0_GDSC 0 #define UFS_GDSC 1 diff --git a/include/dt-bindings/clock/qcom,lpassaudiocc-sc7280.h b/include/dt-bindings/clock/qcom,lpassaudiocc-sc7280.h new file mode 100644 index 000000000000..20ef2ea673f3 --- /dev/null +++ b/include/dt-bindings/clock/qcom,lpassaudiocc-sc7280.h @@ -0,0 +1,43 @@ +/* SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) */ +/* + * Copyright (c) 2021, The Linux Foundation. All rights reserved. + */ + +#ifndef _DT_BINDINGS_CLK_QCOM_LPASS_AUDIO_CC_SC7280_H +#define _DT_BINDINGS_CLK_QCOM_LPASS_AUDIO_CC_SC7280_H + +/* LPASS_AUDIO_CC clocks */ +#define LPASS_AUDIO_CC_PLL 0 +#define LPASS_AUDIO_CC_PLL_OUT_AUX2 1 +#define LPASS_AUDIO_CC_PLL_OUT_AUX2_DIV_CLK_SRC 2 +#define LPASS_AUDIO_CC_PLL_OUT_MAIN_DIV_CLK_SRC 3 +#define LPASS_AUDIO_CC_CDIV_RX_MCLK_DIV_CLK_SRC 4 +#define LPASS_AUDIO_CC_CODEC_MEM0_CLK 5 +#define LPASS_AUDIO_CC_CODEC_MEM1_CLK 6 +#define LPASS_AUDIO_CC_CODEC_MEM2_CLK 7 +#define LPASS_AUDIO_CC_CODEC_MEM_CLK 8 +#define LPASS_AUDIO_CC_EXT_MCLK0_CLK 9 +#define LPASS_AUDIO_CC_EXT_MCLK0_CLK_SRC 10 +#define LPASS_AUDIO_CC_EXT_MCLK1_CLK 11 +#define LPASS_AUDIO_CC_EXT_MCLK1_CLK_SRC 12 +#define LPASS_AUDIO_CC_RX_MCLK_2X_CLK 13 +#define LPASS_AUDIO_CC_RX_MCLK_CLK 14 +#define LPASS_AUDIO_CC_RX_MCLK_CLK_SRC 15 + +/* LPASS_AON_CC clocks */ +#define LPASS_AON_CC_PLL 0 +#define LPASS_AON_CC_PLL_OUT_EVEN 1 +#define LPASS_AON_CC_PLL_OUT_MAIN_CDIV_DIV_CLK_SRC 2 +#define LPASS_AON_CC_PLL_OUT_ODD 3 +#define LPASS_AON_CC_AUDIO_HM_H_CLK 4 +#define LPASS_AON_CC_CDIV_TX_MCLK_DIV_CLK_SRC 5 +#define LPASS_AON_CC_MAIN_RCG_CLK_SRC 6 +#define LPASS_AON_CC_TX_MCLK_2X_CLK 7 +#define LPASS_AON_CC_TX_MCLK_CLK 8 +#define LPASS_AON_CC_TX_MCLK_RCG_CLK_SRC 9 +#define LPASS_AON_CC_VA_MEM0_CLK 10 + +/* LPASS_AON_CC power domains */ +#define LPASS_AON_CC_LPASS_AUDIO_HM_GDSC 0 + +#endif diff --git a/include/dt-bindings/clock/qcom,lpasscorecc-sc7280.h b/include/dt-bindings/clock/qcom,lpasscorecc-sc7280.h new file mode 100644 index 000000000000..28ed2a07aacc --- /dev/null +++ b/include/dt-bindings/clock/qcom,lpasscorecc-sc7280.h @@ -0,0 +1,26 @@ +/* SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) */ +/* + * Copyright (c) 2021, The Linux Foundation. All rights reserved. + */ + +#ifndef _DT_BINDINGS_CLK_QCOM_LPASS_CORE_CC_SC7280_H +#define _DT_BINDINGS_CLK_QCOM_LPASS_CORE_CC_SC7280_H + +/* LPASS_CORE_CC clocks */ +#define LPASS_CORE_CC_DIG_PLL 0 +#define LPASS_CORE_CC_DIG_PLL_OUT_MAIN_DIV_CLK_SRC 1 +#define LPASS_CORE_CC_DIG_PLL_OUT_ODD 2 +#define LPASS_CORE_CC_CORE_CLK 3 +#define LPASS_CORE_CC_CORE_CLK_SRC 4 +#define LPASS_CORE_CC_EXT_IF0_CLK_SRC 5 +#define LPASS_CORE_CC_EXT_IF0_IBIT_CLK 6 +#define LPASS_CORE_CC_EXT_IF1_CLK_SRC 7 +#define LPASS_CORE_CC_EXT_IF1_IBIT_CLK 8 +#define LPASS_CORE_CC_LPM_CORE_CLK 9 +#define LPASS_CORE_CC_LPM_MEM0_CORE_CLK 10 +#define LPASS_CORE_CC_SYSNOC_MPORT_CORE_CLK 11 + +/* LPASS_CORE_CC power domains */ +#define LPASS_CORE_CC_LPASS_CORE_HM_GDSC 0 + +#endif diff --git a/include/dt-bindings/clock/r8a779g0-cpg-mssr.h b/include/dt-bindings/clock/r8a779g0-cpg-mssr.h new file mode 100644 index 000000000000..754c54a6eb06 --- /dev/null +++ b/include/dt-bindings/clock/r8a779g0-cpg-mssr.h @@ -0,0 +1,90 @@ +/* SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) */ +/* + * Copyright (C) 2022 Renesas Electronics Corp. + */ +#ifndef __DT_BINDINGS_CLOCK_R8A779G0_CPG_MSSR_H__ +#define __DT_BINDINGS_CLOCK_R8A779G0_CPG_MSSR_H__ + +#include <dt-bindings/clock/renesas-cpg-mssr.h> + +/* r8a779g0 CPG Core Clocks */ + +#define R8A779G0_CLK_ZX 0 +#define R8A779G0_CLK_ZS 1 +#define R8A779G0_CLK_ZT 2 +#define R8A779G0_CLK_ZTR 3 +#define R8A779G0_CLK_S0D2 4 +#define R8A779G0_CLK_S0D3 5 +#define R8A779G0_CLK_S0D4 6 +#define R8A779G0_CLK_S0D1_VIO 7 +#define R8A779G0_CLK_S0D2_VIO 8 +#define R8A779G0_CLK_S0D4_VIO 9 +#define R8A779G0_CLK_S0D8_VIO 10 +#define R8A779G0_CLK_S0D1_VC 11 +#define R8A779G0_CLK_S0D2_VC 12 +#define R8A779G0_CLK_S0D4_VC 13 +#define R8A779G0_CLK_S0D2_MM 14 +#define R8A779G0_CLK_S0D4_MM 15 +#define R8A779G0_CLK_S0D2_U3DG 16 +#define R8A779G0_CLK_S0D4_U3DG 17 +#define R8A779G0_CLK_S0D2_RT 18 +#define R8A779G0_CLK_S0D3_RT 19 +#define R8A779G0_CLK_S0D4_RT 20 +#define R8A779G0_CLK_S0D6_RT 21 +#define R8A779G0_CLK_S0D24_RT 22 +#define R8A779G0_CLK_S0D2_PER 23 +#define R8A779G0_CLK_S0D3_PER 24 +#define R8A779G0_CLK_S0D4_PER 25 +#define R8A779G0_CLK_S0D6_PER 26 +#define R8A779G0_CLK_S0D12_PER 27 +#define R8A779G0_CLK_S0D24_PER 28 +#define R8A779G0_CLK_S0D1_HSC 29 +#define R8A779G0_CLK_S0D2_HSC 30 +#define R8A779G0_CLK_S0D4_HSC 31 +#define R8A779G0_CLK_S0D2_CC 32 +#define R8A779G0_CLK_SVD1_IR 33 +#define R8A779G0_CLK_SVD2_IR 34 +#define R8A779G0_CLK_SVD1_VIP 35 +#define R8A779G0_CLK_SVD2_VIP 36 +#define R8A779G0_CLK_CL 37 +#define R8A779G0_CLK_CL16M 38 +#define R8A779G0_CLK_CL16M_MM 39 +#define R8A779G0_CLK_CL16M_RT 40 +#define R8A779G0_CLK_CL16M_PER 41 +#define R8A779G0_CLK_CL16M_HSC 42 +#define R8A779G0_CLK_Z0 43 +#define R8A779G0_CLK_ZB3 44 +#define R8A779G0_CLK_ZB3D2 45 +#define R8A779G0_CLK_ZB3D4 46 +#define R8A779G0_CLK_ZG 47 +#define R8A779G0_CLK_SD0H 48 +#define R8A779G0_CLK_SD0 49 +#define R8A779G0_CLK_RPC 50 +#define R8A779G0_CLK_RPCD2 51 +#define R8A779G0_CLK_MSO 52 +#define R8A779G0_CLK_CANFD 53 +#define R8A779G0_CLK_CSI 54 +#define R8A779G0_CLK_FRAY 55 +#define R8A779G0_CLK_IPC 56 +#define R8A779G0_CLK_SASYNCRT 57 +#define R8A779G0_CLK_SASYNCPERD1 58 +#define R8A779G0_CLK_SASYNCPERD2 59 +#define R8A779G0_CLK_SASYNCPERD4 60 +#define R8A779G0_CLK_VIOBUS 61 +#define R8A779G0_CLK_VIOBUSD2 62 +#define R8A779G0_CLK_VCBUS 63 +#define R8A779G0_CLK_VCBUSD2 64 +#define R8A779G0_CLK_DSIEXT 65 +#define R8A779G0_CLK_DSIREF 66 +#define R8A779G0_CLK_ADGH 67 +#define R8A779G0_CLK_OSC 68 +#define R8A779G0_CLK_ZR0 69 +#define R8A779G0_CLK_ZR1 70 +#define R8A779G0_CLK_ZR2 71 +#define R8A779G0_CLK_IMPA 72 +#define R8A779G0_CLK_IMPAD4 73 +#define R8A779G0_CLK_CPEX 74 +#define R8A779G0_CLK_CBFUSA 75 +#define R8A779G0_CLK_R 76 + +#endif /* __DT_BINDINGS_CLOCK_R8A779G0_CPG_MSSR_H__ */ diff --git a/include/dt-bindings/clock/r9a07g043-cpg.h b/include/dt-bindings/clock/r9a07g043-cpg.h new file mode 100644 index 000000000000..27e232733096 --- /dev/null +++ b/include/dt-bindings/clock/r9a07g043-cpg.h @@ -0,0 +1,184 @@ +/* SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) + * + * Copyright (C) 2022 Renesas Electronics Corp. + */ +#ifndef __DT_BINDINGS_CLOCK_R9A07G043_CPG_H__ +#define __DT_BINDINGS_CLOCK_R9A07G043_CPG_H__ + +#include <dt-bindings/clock/renesas-cpg-mssr.h> + +/* R9A07G043 CPG Core Clocks */ +#define R9A07G043_CLK_I 0 +#define R9A07G043_CLK_I2 1 +#define R9A07G043_CLK_S0 2 +#define R9A07G043_CLK_SPI0 3 +#define R9A07G043_CLK_SPI1 4 +#define R9A07G043_CLK_SD0 5 +#define R9A07G043_CLK_SD1 6 +#define R9A07G043_CLK_M0 7 +#define R9A07G043_CLK_M2 8 +#define R9A07G043_CLK_M3 9 +#define R9A07G043_CLK_HP 10 +#define R9A07G043_CLK_TSU 11 +#define R9A07G043_CLK_ZT 12 +#define R9A07G043_CLK_P0 13 +#define R9A07G043_CLK_P1 14 +#define R9A07G043_CLK_P2 15 +#define R9A07G043_CLK_AT 16 +#define R9A07G043_OSCCLK 17 +#define R9A07G043_CLK_P0_DIV2 18 + +/* R9A07G043 Module Clocks */ +#define R9A07G043_CA55_SCLK 0 /* RZ/G2UL Only */ +#define R9A07G043_CA55_PCLK 1 /* RZ/G2UL Only */ +#define R9A07G043_CA55_ATCLK 2 /* RZ/G2UL Only */ +#define R9A07G043_CA55_GICCLK 3 /* RZ/G2UL Only */ +#define R9A07G043_CA55_PERICLK 4 /* RZ/G2UL Only */ +#define R9A07G043_CA55_ACLK 5 /* RZ/G2UL Only */ +#define R9A07G043_CA55_TSCLK 6 /* RZ/G2UL Only */ +#define R9A07G043_GIC600_GICCLK 7 /* RZ/G2UL Only */ +#define R9A07G043_IA55_CLK 8 /* RZ/G2UL Only */ +#define R9A07G043_IA55_PCLK 9 /* RZ/G2UL Only */ +#define R9A07G043_MHU_PCLK 10 /* RZ/G2UL Only */ +#define R9A07G043_SYC_CNT_CLK 11 +#define R9A07G043_DMAC_ACLK 12 +#define R9A07G043_DMAC_PCLK 13 +#define R9A07G043_OSTM0_PCLK 14 +#define R9A07G043_OSTM1_PCLK 15 +#define R9A07G043_OSTM2_PCLK 16 +#define R9A07G043_MTU_X_MCK_MTU3 17 +#define R9A07G043_POE3_CLKM_POE 18 +#define R9A07G043_WDT0_PCLK 19 +#define R9A07G043_WDT0_CLK 20 +#define R9A07G043_WDT2_PCLK 21 /* RZ/G2UL Only */ +#define R9A07G043_WDT2_CLK 22 /* RZ/G2UL Only */ +#define R9A07G043_SPI_CLK2 23 +#define R9A07G043_SPI_CLK 24 +#define R9A07G043_SDHI0_IMCLK 25 +#define R9A07G043_SDHI0_IMCLK2 26 +#define R9A07G043_SDHI0_CLK_HS 27 +#define R9A07G043_SDHI0_ACLK 28 +#define R9A07G043_SDHI1_IMCLK 29 +#define R9A07G043_SDHI1_IMCLK2 30 +#define R9A07G043_SDHI1_CLK_HS 31 +#define R9A07G043_SDHI1_ACLK 32 +#define R9A07G043_ISU_ACLK 33 /* RZ/G2UL Only */ +#define R9A07G043_ISU_PCLK 34 /* RZ/G2UL Only */ +#define R9A07G043_CRU_SYSCLK 35 /* RZ/G2UL Only */ +#define R9A07G043_CRU_VCLK 36 /* RZ/G2UL Only */ +#define R9A07G043_CRU_PCLK 37 /* RZ/G2UL Only */ +#define R9A07G043_CRU_ACLK 38 /* RZ/G2UL Only */ +#define R9A07G043_LCDC_CLK_A 39 /* RZ/G2UL Only */ +#define R9A07G043_LCDC_CLK_P 40 /* RZ/G2UL Only */ +#define R9A07G043_LCDC_CLK_D 41 /* RZ/G2UL Only */ +#define R9A07G043_SSI0_PCLK2 42 +#define R9A07G043_SSI0_PCLK_SFR 43 +#define R9A07G043_SSI1_PCLK2 44 +#define R9A07G043_SSI1_PCLK_SFR 45 +#define R9A07G043_SSI2_PCLK2 46 +#define R9A07G043_SSI2_PCLK_SFR 47 +#define R9A07G043_SSI3_PCLK2 48 +#define R9A07G043_SSI3_PCLK_SFR 49 +#define R9A07G043_SRC_CLKP 50 /* RZ/G2UL Only */ +#define R9A07G043_USB_U2H0_HCLK 51 +#define R9A07G043_USB_U2H1_HCLK 52 +#define R9A07G043_USB_U2P_EXR_CPUCLK 53 +#define R9A07G043_USB_PCLK 54 +#define R9A07G043_ETH0_CLK_AXI 55 +#define R9A07G043_ETH0_CLK_CHI 56 +#define R9A07G043_ETH1_CLK_AXI 57 +#define R9A07G043_ETH1_CLK_CHI 58 +#define R9A07G043_I2C0_PCLK 59 +#define R9A07G043_I2C1_PCLK 60 +#define R9A07G043_I2C2_PCLK 61 +#define R9A07G043_I2C3_PCLK 62 +#define R9A07G043_SCIF0_CLK_PCK 63 +#define R9A07G043_SCIF1_CLK_PCK 64 +#define R9A07G043_SCIF2_CLK_PCK 65 +#define R9A07G043_SCIF3_CLK_PCK 66 +#define R9A07G043_SCIF4_CLK_PCK 67 +#define R9A07G043_SCI0_CLKP 68 +#define R9A07G043_SCI1_CLKP 69 +#define R9A07G043_IRDA_CLKP 70 +#define R9A07G043_RSPI0_CLKB 71 +#define R9A07G043_RSPI1_CLKB 72 +#define R9A07G043_RSPI2_CLKB 73 +#define R9A07G043_CANFD_PCLK 74 +#define R9A07G043_GPIO_HCLK 75 +#define R9A07G043_ADC_ADCLK 76 +#define R9A07G043_ADC_PCLK 77 +#define R9A07G043_TSU_PCLK 78 + +/* R9A07G043 Resets */ +#define R9A07G043_CA55_RST_1_0 0 /* RZ/G2UL Only */ +#define R9A07G043_CA55_RST_1_1 1 /* RZ/G2UL Only */ +#define R9A07G043_CA55_RST_3_0 2 /* RZ/G2UL Only */ +#define R9A07G043_CA55_RST_3_1 3 /* RZ/G2UL Only */ +#define R9A07G043_CA55_RST_4 4 /* RZ/G2UL Only */ +#define R9A07G043_CA55_RST_5 5 /* RZ/G2UL Only */ +#define R9A07G043_CA55_RST_6 6 /* RZ/G2UL Only */ +#define R9A07G043_CA55_RST_7 7 /* RZ/G2UL Only */ +#define R9A07G043_CA55_RST_8 8 /* RZ/G2UL Only */ +#define R9A07G043_CA55_RST_9 9 /* RZ/G2UL Only */ +#define R9A07G043_CA55_RST_10 10 /* RZ/G2UL Only */ +#define R9A07G043_CA55_RST_11 11 /* RZ/G2UL Only */ +#define R9A07G043_CA55_RST_12 12 /* RZ/G2UL Only */ +#define R9A07G043_GIC600_GICRESET_N 13 /* RZ/G2UL Only */ +#define R9A07G043_GIC600_DBG_GICRESET_N 14 /* RZ/G2UL Only */ +#define R9A07G043_IA55_RESETN 15 /* RZ/G2UL Only */ +#define R9A07G043_MHU_RESETN 16 /* RZ/G2UL Only */ +#define R9A07G043_DMAC_ARESETN 17 +#define R9A07G043_DMAC_RST_ASYNC 18 +#define R9A07G043_SYC_RESETN 19 +#define R9A07G043_OSTM0_PRESETZ 20 +#define R9A07G043_OSTM1_PRESETZ 21 +#define R9A07G043_OSTM2_PRESETZ 22 +#define R9A07G043_MTU_X_PRESET_MTU3 23 +#define R9A07G043_POE3_RST_M_REG 24 +#define R9A07G043_WDT0_PRESETN 25 +#define R9A07G043_WDT2_PRESETN 26 /* RZ/G2UL Only */ +#define R9A07G043_SPI_RST 27 +#define R9A07G043_SDHI0_IXRST 28 +#define R9A07G043_SDHI1_IXRST 29 +#define R9A07G043_ISU_ARESETN 30 /* RZ/G2UL Only */ +#define R9A07G043_ISU_PRESETN 31 /* RZ/G2UL Only */ +#define R9A07G043_CRU_CMN_RSTB 32 /* RZ/G2UL Only */ +#define R9A07G043_CRU_PRESETN 33 /* RZ/G2UL Only */ +#define R9A07G043_CRU_ARESETN 34 /* RZ/G2UL Only */ +#define R9A07G043_LCDC_RESET_N 35 /* RZ/G2UL Only */ +#define R9A07G043_SSI0_RST_M2_REG 36 +#define R9A07G043_SSI1_RST_M2_REG 37 +#define R9A07G043_SSI2_RST_M2_REG 38 +#define R9A07G043_SSI3_RST_M2_REG 39 +#define R9A07G043_SRC_RST 40 /* RZ/G2UL Only */ +#define R9A07G043_USB_U2H0_HRESETN 41 +#define R9A07G043_USB_U2H1_HRESETN 42 +#define R9A07G043_USB_U2P_EXL_SYSRST 43 +#define R9A07G043_USB_PRESETN 44 +#define R9A07G043_ETH0_RST_HW_N 45 +#define R9A07G043_ETH1_RST_HW_N 46 +#define R9A07G043_I2C0_MRST 47 +#define R9A07G043_I2C1_MRST 48 +#define R9A07G043_I2C2_MRST 49 +#define R9A07G043_I2C3_MRST 50 +#define R9A07G043_SCIF0_RST_SYSTEM_N 51 +#define R9A07G043_SCIF1_RST_SYSTEM_N 52 +#define R9A07G043_SCIF2_RST_SYSTEM_N 53 +#define R9A07G043_SCIF3_RST_SYSTEM_N 54 +#define R9A07G043_SCIF4_RST_SYSTEM_N 55 +#define R9A07G043_SCI0_RST 56 +#define R9A07G043_SCI1_RST 57 +#define R9A07G043_IRDA_RST 58 +#define R9A07G043_RSPI0_RST 59 +#define R9A07G043_RSPI1_RST 60 +#define R9A07G043_RSPI2_RST 61 +#define R9A07G043_CANFD_RSTP_N 62 +#define R9A07G043_CANFD_RSTC_N 63 +#define R9A07G043_GPIO_RSTN 64 +#define R9A07G043_GPIO_PORT_RESETN 65 +#define R9A07G043_GPIO_SPARE_RESETN 66 +#define R9A07G043_ADC_PRESETN 67 +#define R9A07G043_ADC_ADRST_N 68 +#define R9A07G043_TSU_PRESETN 69 + +#endif /* __DT_BINDINGS_CLOCK_R9A07G043_CPG_H__ */ diff --git a/include/dt-bindings/clock/r9a09g011-cpg.h b/include/dt-bindings/clock/r9a09g011-cpg.h new file mode 100644 index 000000000000..41dd585d7115 --- /dev/null +++ b/include/dt-bindings/clock/r9a09g011-cpg.h @@ -0,0 +1,352 @@ +/* SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) + * + * Copyright (C) 2022 Renesas Electronics Corp. + */ +#ifndef __DT_BINDINGS_CLOCK_R9A09G011_CPG_H__ +#define __DT_BINDINGS_CLOCK_R9A09G011_CPG_H__ + +#include <dt-bindings/clock/renesas-cpg-mssr.h> + +/* Module Clocks */ +#define R9A09G011_SYS_CLK 0 +#define R9A09G011_PFC_PCLK 1 +#define R9A09G011_PMC_CORE_CLOCK 2 +#define R9A09G011_GIC_CLK 3 +#define R9A09G011_RAMA_ACLK 4 +#define R9A09G011_ROMA_ACLK 5 +#define R9A09G011_SEC_ACLK 6 +#define R9A09G011_SEC_PCLK 7 +#define R9A09G011_SEC_TCLK 8 +#define R9A09G011_DMAA_ACLK 9 +#define R9A09G011_TSU0_PCLK 10 +#define R9A09G011_TSU1_PCLK 11 + +#define R9A09G011_CST_TRACECLK 12 +#define R9A09G011_CST_SB_CLK 13 +#define R9A09G011_CST_AHB_CLK 14 +#define R9A09G011_CST_ATB_SB_CLK 15 +#define R9A09G011_CST_TS_SB_CLK 16 + +#define R9A09G011_SDI0_ACLK 17 +#define R9A09G011_SDI0_IMCLK 18 +#define R9A09G011_SDI0_IMCLK2 19 +#define R9A09G011_SDI0_CLK_HS 20 +#define R9A09G011_SDI1_ACLK 21 +#define R9A09G011_SDI1_IMCLK 22 +#define R9A09G011_SDI1_IMCLK2 23 +#define R9A09G011_SDI1_CLK_HS 24 +#define R9A09G011_EMM_ACLK 25 +#define R9A09G011_EMM_IMCLK 26 +#define R9A09G011_EMM_IMCLK2 27 +#define R9A09G011_EMM_CLK_HS 28 +#define R9A09G011_NFI_ACLK 29 +#define R9A09G011_NFI_NF_CLK 30 + +#define R9A09G011_PCI_ACLK 31 +#define R9A09G011_PCI_CLK_PMU 32 +#define R9A09G011_PCI_APB_CLK 33 +#define R9A09G011_USB_ACLK_H 34 +#define R9A09G011_USB_ACLK_P 35 +#define R9A09G011_USB_PCLK 36 +#define R9A09G011_ETH0_CLK_AXI 37 +#define R9A09G011_ETH0_CLK_CHI 38 +#define R9A09G011_ETH0_GPTP_EXT 39 + +#define R9A09G011_SDT_CLK 40 +#define R9A09G011_SDT_CLKAPB 41 +#define R9A09G011_SDT_CLK48 42 +#define R9A09G011_GRP_CLK 43 +#define R9A09G011_CIF_P0_CLK 44 +#define R9A09G011_CIF_P1_CLK 45 +#define R9A09G011_CIF_APB_CLK 46 +#define R9A09G011_DCI_CLKAXI 47 +#define R9A09G011_DCI_CLKAPB 48 +#define R9A09G011_DCI_CLKDCI2 49 + +#define R9A09G011_HMI_PCLK 50 +#define R9A09G011_LCI_PCLK 51 +#define R9A09G011_LCI_ACLK 52 +#define R9A09G011_LCI_VCLK 53 +#define R9A09G011_LCI_LPCLK 54 + +#define R9A09G011_AUI_CLK 55 +#define R9A09G011_AUI_CLKAXI 56 +#define R9A09G011_AUI_CLKAPB 57 +#define R9A09G011_AUMCLK 58 +#define R9A09G011_GMCLK0 59 +#define R9A09G011_GMCLK1 60 +#define R9A09G011_MTR_CLK0 61 +#define R9A09G011_MTR_CLK1 62 +#define R9A09G011_MTR_CLKAPB 63 +#define R9A09G011_GFT_CLK 64 +#define R9A09G011_GFT_CLKAPB 65 +#define R9A09G011_GFT_MCLK 66 + +#define R9A09G011_ATGA_CLK 67 +#define R9A09G011_ATGA_CLKAPB 68 +#define R9A09G011_ATGB_CLK 69 +#define R9A09G011_ATGB_CLKAPB 70 +#define R9A09G011_SYC_CNT_CLK 71 + +#define R9A09G011_CPERI_GRPA_PCLK 72 +#define R9A09G011_TIM0_CLK 73 +#define R9A09G011_TIM1_CLK 74 +#define R9A09G011_TIM2_CLK 75 +#define R9A09G011_TIM3_CLK 76 +#define R9A09G011_TIM4_CLK 77 +#define R9A09G011_TIM5_CLK 78 +#define R9A09G011_TIM6_CLK 79 +#define R9A09G011_TIM7_CLK 80 +#define R9A09G011_IIC_PCLK0 81 + +#define R9A09G011_CPERI_GRPB_PCLK 82 +#define R9A09G011_TIM8_CLK 83 +#define R9A09G011_TIM9_CLK 84 +#define R9A09G011_TIM10_CLK 85 +#define R9A09G011_TIM11_CLK 86 +#define R9A09G011_TIM12_CLK 87 +#define R9A09G011_TIM13_CLK 88 +#define R9A09G011_TIM14_CLK 89 +#define R9A09G011_TIM15_CLK 90 +#define R9A09G011_IIC_PCLK1 91 + +#define R9A09G011_CPERI_GRPC_PCLK 92 +#define R9A09G011_TIM16_CLK 93 +#define R9A09G011_TIM17_CLK 94 +#define R9A09G011_TIM18_CLK 95 +#define R9A09G011_TIM19_CLK 96 +#define R9A09G011_TIM20_CLK 97 +#define R9A09G011_TIM21_CLK 98 +#define R9A09G011_TIM22_CLK 99 +#define R9A09G011_TIM23_CLK 100 +#define R9A09G011_WDT0_PCLK 101 +#define R9A09G011_WDT0_CLK 102 +#define R9A09G011_WDT1_PCLK 103 +#define R9A09G011_WDT1_CLK 104 + +#define R9A09G011_CPERI_GRPD_PCLK 105 +#define R9A09G011_TIM24_CLK 106 +#define R9A09G011_TIM25_CLK 107 +#define R9A09G011_TIM26_CLK 108 +#define R9A09G011_TIM27_CLK 109 +#define R9A09G011_TIM28_CLK 110 +#define R9A09G011_TIM29_CLK 111 +#define R9A09G011_TIM30_CLK 112 +#define R9A09G011_TIM31_CLK 113 + +#define R9A09G011_CPERI_GRPE_PCLK 114 +#define R9A09G011_PWM0_CLK 115 +#define R9A09G011_PWM1_CLK 116 +#define R9A09G011_PWM2_CLK 117 +#define R9A09G011_PWM3_CLK 118 +#define R9A09G011_PWM4_CLK 119 +#define R9A09G011_PWM5_CLK 120 +#define R9A09G011_PWM6_CLK 121 +#define R9A09G011_PWM7_CLK 122 + +#define R9A09G011_CPERI_GRPF_PCLK 123 +#define R9A09G011_PWM8_CLK 124 +#define R9A09G011_PWM9_CLK 125 +#define R9A09G011_PWM10_CLK 126 +#define R9A09G011_PWM11_CLK 127 +#define R9A09G011_PWM12_CLK 128 +#define R9A09G011_PWM13_CLK 129 +#define R9A09G011_PWM14_CLK 130 +#define R9A09G011_PWM15_CLK 131 + +#define R9A09G011_CPERI_GRPG_PCLK 132 +#define R9A09G011_CPERI_GRPH_PCLK 133 +#define R9A09G011_URT_PCLK 134 +#define R9A09G011_URT0_CLK 135 +#define R9A09G011_URT1_CLK 136 +#define R9A09G011_CSI0_CLK 137 +#define R9A09G011_CSI1_CLK 138 +#define R9A09G011_CSI2_CLK 139 +#define R9A09G011_CSI3_CLK 140 +#define R9A09G011_CSI4_CLK 141 +#define R9A09G011_CSI5_CLK 142 + +#define R9A09G011_ICB_ACLK1 143 +#define R9A09G011_ICB_GIC_CLK 144 +#define R9A09G011_ICB_MPCLK1 145 +#define R9A09G011_ICB_SPCLK1 146 +#define R9A09G011_ICB_CLK48 147 +#define R9A09G011_ICB_CLK48_2 148 +#define R9A09G011_ICB_CLK48_3 149 +#define R9A09G011_ICB_CLK48_4L 150 +#define R9A09G011_ICB_CLK48_4R 151 +#define R9A09G011_ICB_CLK48_5 152 +#define R9A09G011_ICB_CST_ATB_SB_CLK 153 +#define R9A09G011_ICB_CST_CS_CLK 154 +#define R9A09G011_ICB_CLK100_1 155 +#define R9A09G011_ICB_ETH0_CLK_AXI 156 +#define R9A09G011_ICB_DCI_CLKAXI 157 +#define R9A09G011_ICB_SYC_CNT_CLK 158 + +#define R9A09G011_ICB_DRPA_ACLK 159 +#define R9A09G011_ICB_RFX_ACLK 160 +#define R9A09G011_ICB_RFX_PCLK5 161 +#define R9A09G011_ICB_MMC_ACLK 162 + +#define R9A09G011_ICB_MPCLK3 163 +#define R9A09G011_ICB_CIMA_CLK 164 +#define R9A09G011_ICB_CIMB_CLK 165 +#define R9A09G011_ICB_BIMA_CLK 166 +#define R9A09G011_ICB_FCD_CLKAXI 167 +#define R9A09G011_ICB_VD_ACLK4 168 +#define R9A09G011_ICB_MPCLK4 169 +#define R9A09G011_ICB_VCD_PCLK4 170 + +#define R9A09G011_CA53_CLK 171 +#define R9A09G011_CA53_ACLK 172 +#define R9A09G011_CA53_APCLK_DBG 173 +#define R9A09G011_CST_APB_CA53_CLK 174 +#define R9A09G011_CA53_ATCLK 175 +#define R9A09G011_CST_CS_CLK 176 +#define R9A09G011_CA53_TSCLK 177 +#define R9A09G011_CST_TS_CLK 178 +#define R9A09G011_CA53_APCLK_REG 179 + +#define R9A09G011_DRPA_ACLK 180 +#define R9A09G011_DRPA_DCLK 181 +#define R9A09G011_DRPA_INITCLK 182 + +#define R9A09G011_RAMB0_ACLK 183 +#define R9A09G011_RAMB1_ACLK 184 +#define R9A09G011_RAMB2_ACLK 185 +#define R9A09G011_RAMB3_ACLK 186 + +#define R9A09G011_CIMA_CLKAPB 187 +#define R9A09G011_CIMA_CLK 188 +#define R9A09G011_CIMB_CLK 189 +#define R9A09G011_FAFA_CLK 190 +#define R9A09G011_STG_CLKAXI 191 +#define R9A09G011_STG_CLK0 192 + +#define R9A09G011_BIMA_CLKAPB 193 +#define R9A09G011_BIMA_CLK 194 +#define R9A09G011_FAFB_CLK 195 +#define R9A09G011_FCD_CLK 196 +#define R9A09G011_FCD_CLKAXI 197 + +#define R9A09G011_RIM_CLK 198 +#define R9A09G011_VCD_ACLK 199 +#define R9A09G011_VCD_PCLK 200 +#define R9A09G011_JPG0_CLK 201 +#define R9A09G011_JPG0_ACLK 202 + +#define R9A09G011_MMC_CORE_DDRC_CLK 203 +#define R9A09G011_MMC_ACLK 204 +#define R9A09G011_MMC_PCLK 205 +#define R9A09G011_DDI_APBCLK 206 + +/* Resets */ +#define R9A09G011_SYS_RST_N 0 +#define R9A09G011_PFC_PRESETN 1 +#define R9A09G011_RAMA_ARESETN 2 +#define R9A09G011_ROM_ARESETN 3 +#define R9A09G011_DMAA_ARESETN 4 +#define R9A09G011_SEC_ARESETN 5 +#define R9A09G011_SEC_PRESETN 6 +#define R9A09G011_SEC_RSTB 7 +#define R9A09G011_TSU0_RESETN 8 +#define R9A09G011_TSU1_RESETN 9 +#define R9A09G011_PMC_RESET_N 10 + +#define R9A09G011_CST_NTRST 11 +#define R9A09G011_CST_NPOTRST 12 +#define R9A09G011_CST_NTRST2 13 +#define R9A09G011_CST_CS_RESETN 14 +#define R9A09G011_CST_TS_RESETN 15 +#define R9A09G011_CST_TRESETN 16 +#define R9A09G011_CST_SB_RESETN 17 +#define R9A09G011_CST_AHB_RESETN 18 +#define R9A09G011_CST_TS_SB_RESETN 19 +#define R9A09G011_CST_APB_CA53_RESETN 20 +#define R9A09G011_CST_ATB_SB_RESETN 21 + +#define R9A09G011_SDI0_IXRST 22 +#define R9A09G011_SDI1_IXRST 23 +#define R9A09G011_EMM_IXRST 24 +#define R9A09G011_NFI_MARESETN 25 +#define R9A09G011_NFI_REG_RST_N 26 +#define R9A09G011_USB_PRESET_N 27 +#define R9A09G011_USB_DRD_RESET 28 +#define R9A09G011_USB_ARESETN_P 29 +#define R9A09G011_USB_ARESETN_H 30 +#define R9A09G011_ETH0_RST_HW_N 31 +#define R9A09G011_PCI_ARESETN 32 + +#define R9A09G011_SDT_RSTSYSAX 33 +#define R9A09G011_GRP_RESETN 34 +#define R9A09G011_CIF_RST_N 35 +#define R9A09G011_DCU_RSTSYSAX 36 +#define R9A09G011_HMI_RST_N 37 +#define R9A09G011_HMI_PRESETN 38 +#define R9A09G011_LCI_PRESETN 39 +#define R9A09G011_LCI_ARESETN 40 + +#define R9A09G011_AUI_RSTSYSAX 41 +#define R9A09G011_MTR_RSTSYSAX 42 +#define R9A09G011_GFT_RSTSYSAX 43 +#define R9A09G011_ATGA_RSTSYSAX 44 +#define R9A09G011_ATGB_RSTSYSAX 45 +#define R9A09G011_SYC_RST_N 46 + +#define R9A09G011_TIM_GPA_PRESETN 47 +#define R9A09G011_TIM_GPB_PRESETN 48 +#define R9A09G011_TIM_GPC_PRESETN 49 +#define R9A09G011_TIM_GPD_PRESETN 50 +#define R9A09G011_PWM_GPE_PRESETN 51 +#define R9A09G011_PWM_GPF_PRESETN 52 +#define R9A09G011_CSI_GPG_PRESETN 53 +#define R9A09G011_CSI_GPH_PRESETN 54 +#define R9A09G011_IIC_GPA_PRESETN 55 +#define R9A09G011_IIC_GPB_PRESETN 56 +#define R9A09G011_URT_PRESETN 57 +#define R9A09G011_WDT0_PRESETN 58 +#define R9A09G011_WDT1_PRESETN 59 + +#define R9A09G011_ICB_PD_AWO_RST_N 60 +#define R9A09G011_ICB_PD_MMC_RST_N 61 +#define R9A09G011_ICB_PD_VD0_RST_N 62 +#define R9A09G011_ICB_PD_VD1_RST_N 63 +#define R9A09G011_ICB_PD_RFX_RST_N 64 + +#define R9A09G011_CA53_NCPUPORESET0 65 +#define R9A09G011_CA53_NCPUPORESET1 66 +#define R9A09G011_CA53_NCORERESET0 67 +#define R9A09G011_CA53_NCORERESET1 68 +#define R9A09G011_CA53_NPRESETDBG 69 +#define R9A09G011_CA53_L2RESET 70 +#define R9A09G011_CA53_NMISCRESET_HM 71 +#define R9A09G011_CA53_NMISCRESET_SM 72 +#define R9A09G011_CA53_NARESET 73 + +#define R9A09G011_DRPA_ARESETN 74 + +#define R9A09G011_RAMB0_ARESETN 75 +#define R9A09G011_RAMB1_ARESETN 76 +#define R9A09G011_RAMB2_ARESETN 77 +#define R9A09G011_RAMB3_ARESETN 78 + +#define R9A09G011_CIMA_RSTSYSAX 79 +#define R9A09G011_CIMB_RSTSYSAX 80 +#define R9A09G011_FAFA_RSTSYSAX 81 +#define R9A09G011_STG_RSTSYSAX 82 + +#define R9A09G011_BIMA_RSTSYSAX 83 +#define R9A09G011_FAFB_RSTSYSAX 84 +#define R9A09G011_FCD_RSTSYSAX 85 +#define R9A09G011_RIM_RSTSYSAX 86 +#define R9A09G011_VCD_RESETN 87 +#define R9A09G011_JPG_XRESET 88 + +#define R9A09G011_MMC_CORE_DDRC_RSTN 89 +#define R9A09G011_MMC_ARESETN_N 90 +#define R9A09G011_MMC_PRESETN 91 +#define R9A09G011_DDI_PWROK 92 +#define R9A09G011_DDI_RESET 93 +#define R9A09G011_DDI_RESETN_APB 94 + +#endif /* __DT_BINDINGS_CLOCK_R9A09G011_CPG_H__ */ diff --git a/include/dt-bindings/clock/samsung,exynosautov9.h b/include/dt-bindings/clock/samsung,exynosautov9.h new file mode 100644 index 000000000000..71ec0a955364 --- /dev/null +++ b/include/dt-bindings/clock/samsung,exynosautov9.h @@ -0,0 +1,299 @@ +/* SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) */ +/* + * Copyright (c) 2022 Samsung Electronics Co., Ltd. + * Author: Chanho Park <chanho61.park@samsung.com> + * + * Device Tree binding constants for Exynos Auto V9 clock controller. + */ + +#ifndef _DT_BINDINGS_CLOCK_EXYNOSAUTOV9_H +#define _DT_BINDINGS_CLOCK_EXYNOSAUTOV9_H + +/* CMU_TOP */ +#define FOUT_SHARED0_PLL 1 +#define FOUT_SHARED1_PLL 2 +#define FOUT_SHARED2_PLL 3 +#define FOUT_SHARED3_PLL 4 +#define FOUT_SHARED4_PLL 5 + +/* MUX in CMU_TOP */ +#define MOUT_SHARED0_PLL 6 +#define MOUT_SHARED1_PLL 7 +#define MOUT_SHARED2_PLL 8 +#define MOUT_SHARED3_PLL 9 +#define MOUT_SHARED4_PLL 10 +#define MOUT_CLKCMU_CMU_BOOST 11 +#define MOUT_CLKCMU_CMU_CMUREF 12 +#define MOUT_CLKCMU_ACC_BUS 13 +#define MOUT_CLKCMU_APM_BUS 14 +#define MOUT_CLKCMU_AUD_CPU 15 +#define MOUT_CLKCMU_AUD_BUS 16 +#define MOUT_CLKCMU_BUSC_BUS 17 +#define MOUT_CLKCMU_BUSMC_BUS 19 +#define MOUT_CLKCMU_CORE_BUS 20 +#define MOUT_CLKCMU_CPUCL0_SWITCH 21 +#define MOUT_CLKCMU_CPUCL0_CLUSTER 22 +#define MOUT_CLKCMU_CPUCL1_SWITCH 24 +#define MOUT_CLKCMU_CPUCL1_CLUSTER 25 +#define MOUT_CLKCMU_DPTX_BUS 26 +#define MOUT_CLKCMU_DPTX_DPGTC 27 +#define MOUT_CLKCMU_DPUM_BUS 28 +#define MOUT_CLKCMU_DPUS0_BUS 29 +#define MOUT_CLKCMU_DPUS1_BUS 30 +#define MOUT_CLKCMU_FSYS0_BUS 31 +#define MOUT_CLKCMU_FSYS0_PCIE 32 +#define MOUT_CLKCMU_FSYS1_BUS 33 +#define MOUT_CLKCMU_FSYS1_USBDRD 34 +#define MOUT_CLKCMU_FSYS1_MMC_CARD 35 +#define MOUT_CLKCMU_FSYS2_BUS 36 +#define MOUT_CLKCMU_FSYS2_UFS_EMBD 37 +#define MOUT_CLKCMU_FSYS2_ETHERNET 38 +#define MOUT_CLKCMU_G2D_G2D 39 +#define MOUT_CLKCMU_G2D_MSCL 40 +#define MOUT_CLKCMU_G3D00_SWITCH 41 +#define MOUT_CLKCMU_G3D01_SWITCH 42 +#define MOUT_CLKCMU_G3D1_SWITCH 43 +#define MOUT_CLKCMU_ISPB_BUS 44 +#define MOUT_CLKCMU_MFC_MFC 45 +#define MOUT_CLKCMU_MFC_WFD 46 +#define MOUT_CLKCMU_MIF_SWITCH 47 +#define MOUT_CLKCMU_MIF_BUSP 48 +#define MOUT_CLKCMU_NPU_BUS 49 +#define MOUT_CLKCMU_PERIC0_BUS 50 +#define MOUT_CLKCMU_PERIC0_IP 51 +#define MOUT_CLKCMU_PERIC1_BUS 52 +#define MOUT_CLKCMU_PERIC1_IP 53 +#define MOUT_CLKCMU_PERIS_BUS 54 + +/* DIV in CMU_TOP */ +#define DOUT_SHARED0_DIV3 101 +#define DOUT_SHARED0_DIV2 102 +#define DOUT_SHARED1_DIV3 103 +#define DOUT_SHARED1_DIV2 104 +#define DOUT_SHARED1_DIV4 105 +#define DOUT_SHARED2_DIV3 106 +#define DOUT_SHARED2_DIV2 107 +#define DOUT_SHARED2_DIV4 108 +#define DOUT_SHARED4_DIV2 109 +#define DOUT_SHARED4_DIV4 110 +#define DOUT_CLKCMU_CMU_BOOST 111 +#define DOUT_CLKCMU_ACC_BUS 112 +#define DOUT_CLKCMU_APM_BUS 113 +#define DOUT_CLKCMU_AUD_CPU 114 +#define DOUT_CLKCMU_AUD_BUS 115 +#define DOUT_CLKCMU_BUSC_BUS 116 +#define DOUT_CLKCMU_BUSMC_BUS 118 +#define DOUT_CLKCMU_CORE_BUS 119 +#define DOUT_CLKCMU_CPUCL0_SWITCH 120 +#define DOUT_CLKCMU_CPUCL0_CLUSTER 121 +#define DOUT_CLKCMU_CPUCL1_SWITCH 123 +#define DOUT_CLKCMU_CPUCL1_CLUSTER 124 +#define DOUT_CLKCMU_DPTX_BUS 125 +#define DOUT_CLKCMU_DPTX_DPGTC 126 +#define DOUT_CLKCMU_DPUM_BUS 127 +#define DOUT_CLKCMU_DPUS0_BUS 128 +#define DOUT_CLKCMU_DPUS1_BUS 129 +#define DOUT_CLKCMU_FSYS0_BUS 130 +#define DOUT_CLKCMU_FSYS0_PCIE 131 +#define DOUT_CLKCMU_FSYS1_BUS 132 +#define DOUT_CLKCMU_FSYS1_USBDRD 133 +#define DOUT_CLKCMU_FSYS2_BUS 134 +#define DOUT_CLKCMU_FSYS2_UFS_EMBD 135 +#define DOUT_CLKCMU_FSYS2_ETHERNET 136 +#define DOUT_CLKCMU_G2D_G2D 137 +#define DOUT_CLKCMU_G2D_MSCL 138 +#define DOUT_CLKCMU_G3D00_SWITCH 139 +#define DOUT_CLKCMU_G3D01_SWITCH 140 +#define DOUT_CLKCMU_G3D1_SWITCH 141 +#define DOUT_CLKCMU_ISPB_BUS 142 +#define DOUT_CLKCMU_MFC_MFC 143 +#define DOUT_CLKCMU_MFC_WFD 144 +#define DOUT_CLKCMU_MIF_SWITCH 145 +#define DOUT_CLKCMU_MIF_BUSP 146 +#define DOUT_CLKCMU_NPU_BUS 147 +#define DOUT_CLKCMU_PERIC0_BUS 148 +#define DOUT_CLKCMU_PERIC0_IP 149 +#define DOUT_CLKCMU_PERIC1_BUS 150 +#define DOUT_CLKCMU_PERIC1_IP 151 +#define DOUT_CLKCMU_PERIS_BUS 152 + +/* GAT in CMU_TOP */ +#define GOUT_CLKCMU_CMU_BOOST 201 +#define GOUT_CLKCMU_CPUCL0_BOOST 202 +#define GOUT_CLKCMU_CPUCL1_BOOST 203 +#define GOUT_CLKCMU_CORE_BOOST 204 +#define GOUT_CLKCMU_BUSC_BOOST 205 +#define GOUT_CLKCMU_BUSMC_BOOST 206 +#define GOUT_CLKCMU_MIF_BOOST 207 +#define GOUT_CLKCMU_ACC_BUS 208 +#define GOUT_CLKCMU_APM_BUS 209 +#define GOUT_CLKCMU_AUD_CPU 210 +#define GOUT_CLKCMU_AUD_BUS 211 +#define GOUT_CLKCMU_BUSC_BUS 212 +#define GOUT_CLKCMU_BUSMC_BUS 214 +#define GOUT_CLKCMU_CORE_BUS 215 +#define GOUT_CLKCMU_CPUCL0_SWITCH 216 +#define GOUT_CLKCMU_CPUCL0_CLUSTER 217 +#define GOUT_CLKCMU_CPUCL1_SWITCH 219 +#define GOUT_CLKCMU_CPUCL1_CLUSTER 220 +#define GOUT_CLKCMU_DPTX_BUS 221 +#define GOUT_CLKCMU_DPTX_DPGTC 222 +#define GOUT_CLKCMU_DPUM_BUS 223 +#define GOUT_CLKCMU_DPUS0_BUS 224 +#define GOUT_CLKCMU_DPUS1_BUS 225 +#define GOUT_CLKCMU_FSYS0_BUS 226 +#define GOUT_CLKCMU_FSYS0_PCIE 227 +#define GOUT_CLKCMU_FSYS1_BUS 228 +#define GOUT_CLKCMU_FSYS1_USBDRD 229 +#define GOUT_CLKCMU_FSYS1_MMC_CARD 230 +#define GOUT_CLKCMU_FSYS2_BUS 231 +#define GOUT_CLKCMU_FSYS2_UFS_EMBD 232 +#define GOUT_CLKCMU_FSYS2_ETHERNET 233 +#define GOUT_CLKCMU_G2D_G2D 234 +#define GOUT_CLKCMU_G2D_MSCL 235 +#define GOUT_CLKCMU_G3D00_SWITCH 236 +#define GOUT_CLKCMU_G3D01_SWITCH 237 +#define GOUT_CLKCMU_G3D1_SWITCH 238 +#define GOUT_CLKCMU_ISPB_BUS 239 +#define GOUT_CLKCMU_MFC_MFC 240 +#define GOUT_CLKCMU_MFC_WFD 241 +#define GOUT_CLKCMU_MIF_SWITCH 242 +#define GOUT_CLKCMU_MIF_BUSP 243 +#define GOUT_CLKCMU_NPU_BUS 244 +#define GOUT_CLKCMU_PERIC0_BUS 245 +#define GOUT_CLKCMU_PERIC0_IP 246 +#define GOUT_CLKCMU_PERIC1_BUS 247 +#define GOUT_CLKCMU_PERIC1_IP 248 +#define GOUT_CLKCMU_PERIS_BUS 249 + +#define TOP_NR_CLK 249 + +/* CMU_BUSMC */ +#define CLK_MOUT_BUSMC_BUS_USER 1 +#define CLK_DOUT_BUSMC_BUSP 2 +#define CLK_GOUT_BUSMC_PDMA0_PCLK 3 +#define CLK_GOUT_BUSMC_SPDMA_PCLK 4 + +#define BUSMC_NR_CLK 4 + +/* CMU_CORE */ +#define CLK_MOUT_CORE_BUS_USER 1 +#define CLK_DOUT_CORE_BUSP 2 +#define CLK_GOUT_CORE_CCI_CLK 3 +#define CLK_GOUT_CORE_CCI_PCLK 4 +#define CLK_GOUT_CORE_CMU_CORE_PCLK 5 + +#define CORE_NR_CLK 5 + +/* CMU_FSYS2 */ +#define CLK_MOUT_FSYS2_BUS_USER 1 +#define CLK_MOUT_FSYS2_UFS_EMBD_USER 2 +#define CLK_MOUT_FSYS2_ETHERNET_USER 3 +#define CLK_GOUT_FSYS2_UFS_EMBD0_ACLK 4 +#define CLK_GOUT_FSYS2_UFS_EMBD0_UNIPRO 5 +#define CLK_GOUT_FSYS2_UFS_EMBD1_ACLK 6 +#define CLK_GOUT_FSYS2_UFS_EMBD1_UNIPRO 7 + +#define FSYS2_NR_CLK 7 + +/* CMU_PERIC0 */ +#define CLK_MOUT_PERIC0_BUS_USER 1 +#define CLK_MOUT_PERIC0_IP_USER 2 +#define CLK_MOUT_PERIC0_USI00_USI 3 +#define CLK_MOUT_PERIC0_USI01_USI 4 +#define CLK_MOUT_PERIC0_USI02_USI 5 +#define CLK_MOUT_PERIC0_USI03_USI 6 +#define CLK_MOUT_PERIC0_USI04_USI 7 +#define CLK_MOUT_PERIC0_USI05_USI 8 +#define CLK_MOUT_PERIC0_USI_I2C 9 + +#define CLK_DOUT_PERIC0_USI00_USI 10 +#define CLK_DOUT_PERIC0_USI01_USI 11 +#define CLK_DOUT_PERIC0_USI02_USI 12 +#define CLK_DOUT_PERIC0_USI03_USI 13 +#define CLK_DOUT_PERIC0_USI04_USI 14 +#define CLK_DOUT_PERIC0_USI05_USI 15 +#define CLK_DOUT_PERIC0_USI_I2C 16 + +#define CLK_GOUT_PERIC0_IPCLK_0 20 +#define CLK_GOUT_PERIC0_IPCLK_1 21 +#define CLK_GOUT_PERIC0_IPCLK_2 22 +#define CLK_GOUT_PERIC0_IPCLK_3 23 +#define CLK_GOUT_PERIC0_IPCLK_4 24 +#define CLK_GOUT_PERIC0_IPCLK_5 25 +#define CLK_GOUT_PERIC0_IPCLK_6 26 +#define CLK_GOUT_PERIC0_IPCLK_7 27 +#define CLK_GOUT_PERIC0_IPCLK_8 28 +#define CLK_GOUT_PERIC0_IPCLK_9 29 +#define CLK_GOUT_PERIC0_IPCLK_10 30 +#define CLK_GOUT_PERIC0_IPCLK_11 30 +#define CLK_GOUT_PERIC0_PCLK_0 31 +#define CLK_GOUT_PERIC0_PCLK_1 32 +#define CLK_GOUT_PERIC0_PCLK_2 33 +#define CLK_GOUT_PERIC0_PCLK_3 34 +#define CLK_GOUT_PERIC0_PCLK_4 35 +#define CLK_GOUT_PERIC0_PCLK_5 36 +#define CLK_GOUT_PERIC0_PCLK_6 37 +#define CLK_GOUT_PERIC0_PCLK_7 38 +#define CLK_GOUT_PERIC0_PCLK_8 39 +#define CLK_GOUT_PERIC0_PCLK_9 40 +#define CLK_GOUT_PERIC0_PCLK_10 41 +#define CLK_GOUT_PERIC0_PCLK_11 42 + +#define PERIC0_NR_CLK 42 + +/* CMU_PERIC1 */ +#define CLK_MOUT_PERIC1_BUS_USER 1 +#define CLK_MOUT_PERIC1_IP_USER 2 +#define CLK_MOUT_PERIC1_USI06_USI 3 +#define CLK_MOUT_PERIC1_USI07_USI 4 +#define CLK_MOUT_PERIC1_USI08_USI 5 +#define CLK_MOUT_PERIC1_USI09_USI 6 +#define CLK_MOUT_PERIC1_USI10_USI 7 +#define CLK_MOUT_PERIC1_USI11_USI 8 +#define CLK_MOUT_PERIC1_USI_I2C 9 + +#define CLK_DOUT_PERIC1_USI06_USI 10 +#define CLK_DOUT_PERIC1_USI07_USI 11 +#define CLK_DOUT_PERIC1_USI08_USI 12 +#define CLK_DOUT_PERIC1_USI09_USI 13 +#define CLK_DOUT_PERIC1_USI10_USI 14 +#define CLK_DOUT_PERIC1_USI11_USI 15 +#define CLK_DOUT_PERIC1_USI_I2C 16 + +#define CLK_GOUT_PERIC1_IPCLK_0 20 +#define CLK_GOUT_PERIC1_IPCLK_1 21 +#define CLK_GOUT_PERIC1_IPCLK_2 22 +#define CLK_GOUT_PERIC1_IPCLK_3 23 +#define CLK_GOUT_PERIC1_IPCLK_4 24 +#define CLK_GOUT_PERIC1_IPCLK_5 25 +#define CLK_GOUT_PERIC1_IPCLK_6 26 +#define CLK_GOUT_PERIC1_IPCLK_7 27 +#define CLK_GOUT_PERIC1_IPCLK_8 28 +#define CLK_GOUT_PERIC1_IPCLK_9 29 +#define CLK_GOUT_PERIC1_IPCLK_10 30 +#define CLK_GOUT_PERIC1_IPCLK_11 30 +#define CLK_GOUT_PERIC1_PCLK_0 31 +#define CLK_GOUT_PERIC1_PCLK_1 32 +#define CLK_GOUT_PERIC1_PCLK_2 33 +#define CLK_GOUT_PERIC1_PCLK_3 34 +#define CLK_GOUT_PERIC1_PCLK_4 35 +#define CLK_GOUT_PERIC1_PCLK_5 36 +#define CLK_GOUT_PERIC1_PCLK_6 37 +#define CLK_GOUT_PERIC1_PCLK_7 38 +#define CLK_GOUT_PERIC1_PCLK_8 39 +#define CLK_GOUT_PERIC1_PCLK_9 40 +#define CLK_GOUT_PERIC1_PCLK_10 41 +#define CLK_GOUT_PERIC1_PCLK_11 42 + +#define PERIC1_NR_CLK 42 + +/* CMU_PERIS */ +#define CLK_MOUT_PERIS_BUS_USER 1 +#define CLK_GOUT_SYSREG_PERIS_PCLK 2 +#define CLK_GOUT_WDT_CLUSTER0 3 +#define CLK_GOUT_WDT_CLUSTER1 4 + +#define PERIS_NR_CLK 4 + +#endif /* _DT_BINDINGS_CLOCK_EXYNOSAUTOV9_H */ diff --git a/include/dt-bindings/clock/stm32mp1-clks.h b/include/dt-bindings/clock/stm32mp1-clks.h index e02770b98e6c..25e8cfd43459 100644 --- a/include/dt-bindings/clock/stm32mp1-clks.h +++ b/include/dt-bindings/clock/stm32mp1-clks.h @@ -249,30 +249,26 @@ #define STM32MP1_LAST_CLK 232 /* SCMI clock identifiers */ -#define CK_SCMI0_HSE 0 -#define CK_SCMI0_HSI 1 -#define CK_SCMI0_CSI 2 -#define CK_SCMI0_LSE 3 -#define CK_SCMI0_LSI 4 -#define CK_SCMI0_PLL2_Q 5 -#define CK_SCMI0_PLL2_R 6 -#define CK_SCMI0_MPU 7 -#define CK_SCMI0_AXI 8 -#define CK_SCMI0_BSEC 9 -#define CK_SCMI0_CRYP1 10 -#define CK_SCMI0_GPIOZ 11 -#define CK_SCMI0_HASH1 12 -#define CK_SCMI0_I2C4 13 -#define CK_SCMI0_I2C6 14 -#define CK_SCMI0_IWDG1 15 -#define CK_SCMI0_RNG1 16 -#define CK_SCMI0_RTC 17 -#define CK_SCMI0_RTCAPB 18 -#define CK_SCMI0_SPI6 19 -#define CK_SCMI0_USART1 20 - -#define CK_SCMI1_PLL3_Q 0 -#define CK_SCMI1_PLL3_R 1 -#define CK_SCMI1_MCU 2 +#define CK_SCMI_HSE 0 +#define CK_SCMI_HSI 1 +#define CK_SCMI_CSI 2 +#define CK_SCMI_LSE 3 +#define CK_SCMI_LSI 4 +#define CK_SCMI_PLL2_Q 5 +#define CK_SCMI_PLL2_R 6 +#define CK_SCMI_MPU 7 +#define CK_SCMI_AXI 8 +#define CK_SCMI_BSEC 9 +#define CK_SCMI_CRYP1 10 +#define CK_SCMI_GPIOZ 11 +#define CK_SCMI_HASH1 12 +#define CK_SCMI_I2C4 13 +#define CK_SCMI_I2C6 14 +#define CK_SCMI_IWDG1 15 +#define CK_SCMI_RNG1 16 +#define CK_SCMI_RTC 17 +#define CK_SCMI_RTCAPB 18 +#define CK_SCMI_SPI6 19 +#define CK_SCMI_USART1 20 #endif /* _DT_BINDINGS_STM32MP1_CLKS_H_ */ diff --git a/include/dt-bindings/clock/tegra234-clock.h b/include/dt-bindings/clock/tegra234-clock.h index 8cae969e8cba..bd4c3086a2da 100644 --- a/include/dt-bindings/clock/tegra234-clock.h +++ b/include/dt-bindings/clock/tegra234-clock.h @@ -140,6 +140,14 @@ #define TEGRA234_CLK_PEX2_C9_CORE 173U /** @brief output of gate CLK_ENB_PEX2_CORE_10 */ #define TEGRA234_CLK_PEX2_C10_CORE 187U +/** @brief CLK_RST_CONTROLLER_CLK_SOURCE_QSPI0 switch divider output */ +#define TEGRA234_CLK_QSPI0_2X_PM 192U +/** @brief CLK_RST_CONTROLLER_CLK_SOURCE_QSPI1 switch divider output */ +#define TEGRA234_CLK_QSPI1_2X_PM 193U +/** @brief output of the divider QSPI_CLK_DIV2_SEL in CLK_RST_CONTROLLER_CLK_SOURCE_QSPI0 */ +#define TEGRA234_CLK_QSPI0_PM 194U +/** @brief output of the divider QSPI_CLK_DIV2_SEL in CLK_RST_CONTROLLER_CLK_SOURCE_QSPI1 */ +#define TEGRA234_CLK_QSPI1_PM 195U /** @brief CLK_RST_CONTROLLER_CLK_SOURCE_SDMMC_LEGACY_TM switch divider output */ #define TEGRA234_CLK_SDMMC_LEGACY_TM 219U /** @brief output of gate CLK_ENB_PEX0_CORE_0 */ diff --git a/include/dt-bindings/power/imx8mp-power.h b/include/dt-bindings/power/imx8mp-power.h index 9f90c40a2c6c..7789bcca3223 100644 --- a/include/dt-bindings/power/imx8mp-power.h +++ b/include/dt-bindings/power/imx8mp-power.h @@ -32,4 +32,22 @@ #define IMX8MP_HSIOBLK_PD_PCIE 3 #define IMX8MP_HSIOBLK_PD_PCIE_PHY 4 +#define IMX8MP_MEDIABLK_PD_MIPI_DSI_1 0 +#define IMX8MP_MEDIABLK_PD_MIPI_CSI2_1 1 +#define IMX8MP_MEDIABLK_PD_LCDIF_1 2 +#define IMX8MP_MEDIABLK_PD_ISI 3 +#define IMX8MP_MEDIABLK_PD_MIPI_CSI2_2 4 +#define IMX8MP_MEDIABLK_PD_LCDIF_2 5 +#define IMX8MP_MEDIABLK_PD_ISP 6 +#define IMX8MP_MEDIABLK_PD_DWE 7 +#define IMX8MP_MEDIABLK_PD_MIPI_DSI_2 8 + +#define IMX8MP_HDMIBLK_PD_IRQSTEER 0 +#define IMX8MP_HDMIBLK_PD_LCDIF 1 +#define IMX8MP_HDMIBLK_PD_PAI 2 +#define IMX8MP_HDMIBLK_PD_PVI 3 +#define IMX8MP_HDMIBLK_PD_TRNG 4 +#define IMX8MP_HDMIBLK_PD_HDMI_TX 5 +#define IMX8MP_HDMIBLK_PD_HDMI_TX_PHY 6 + #endif diff --git a/include/dt-bindings/power/r8a779g0-sysc.h b/include/dt-bindings/power/r8a779g0-sysc.h new file mode 100644 index 000000000000..7daa70f1814e --- /dev/null +++ b/include/dt-bindings/power/r8a779g0-sysc.h @@ -0,0 +1,45 @@ +/* SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) */ +/* + * Copyright (C) 2022 Renesas Electronics Corp. + */ +#ifndef __DT_BINDINGS_POWER_R8A779G0_SYSC_H__ +#define __DT_BINDINGS_POWER_R8A779G0_SYSC_H__ + +/* + * These power domain indices match the Power Domain Register Numbers (PDR) + */ + +#define R8A779G0_PD_A1E0D0C0 0 +#define R8A779G0_PD_A1E0D0C1 1 +#define R8A779G0_PD_A1E0D1C0 2 +#define R8A779G0_PD_A1E0D1C1 3 +#define R8A779G0_PD_A2E0D0 16 +#define R8A779G0_PD_A2E0D1 17 +#define R8A779G0_PD_A3E0 20 +#define R8A779G0_PD_A33DGA 24 +#define R8A779G0_PD_A23DGB 25 +#define R8A779G0_PD_A1DSP0 33 +#define R8A779G0_PD_A2IMP01 34 +#define R8A779G0_PD_A2PSC 35 +#define R8A779G0_PD_A2CV0 36 +#define R8A779G0_PD_A2CV1 37 +#define R8A779G0_PD_A1CNN0 41 +#define R8A779G0_PD_A2CN0 42 +#define R8A779G0_PD_A3IR 43 +#define R8A779G0_PD_A1DSP1 45 +#define R8A779G0_PD_A2IMP23 46 +#define R8A779G0_PD_A2DMA 47 +#define R8A779G0_PD_A2CV2 48 +#define R8A779G0_PD_A2CV3 49 +#define R8A779G0_PD_A1DSP2 53 +#define R8A779G0_PD_A1DSP3 54 +#define R8A779G0_PD_A3VIP0 56 +#define R8A779G0_PD_A3VIP1 57 +#define R8A779G0_PD_A3VIP2 58 +#define R8A779G0_PD_A3ISP0 60 +#define R8A779G0_PD_A3ISP1 61 + +/* Always-on power area */ +#define R8A779G0_PD_ALWAYS_ON 64 + +#endif /* __DT_BINDINGS_POWER_R8A779G0_SYSC_H__*/ diff --git a/include/dt-bindings/reset/mt8192-resets.h b/include/dt-bindings/reset/mt8192-resets.h index be9a7ca245b9..764ca9910fa9 100644 --- a/include/dt-bindings/reset/mt8192-resets.h +++ b/include/dt-bindings/reset/mt8192-resets.h @@ -27,4 +27,7 @@ #define MT8192_TOPRGU_SW_RST_NUM 23 +/* MMSYS resets */ +#define MT8192_MMSYS_SW0_RST_B_DISP_DSI0 15 + #endif /* _DT_BINDINGS_RESET_CONTROLLER_MT8192 */ diff --git a/include/dt-bindings/reset/stm32mp1-resets.h b/include/dt-bindings/reset/stm32mp1-resets.h index f3a0ed317835..4ffa7c3612e6 100644 --- a/include/dt-bindings/reset/stm32mp1-resets.h +++ b/include/dt-bindings/reset/stm32mp1-resets.h @@ -107,17 +107,17 @@ #define GPIOK_R 19786 /* SCMI reset domain identifiers */ -#define RST_SCMI0_SPI6 0 -#define RST_SCMI0_I2C4 1 -#define RST_SCMI0_I2C6 2 -#define RST_SCMI0_USART1 3 -#define RST_SCMI0_STGEN 4 -#define RST_SCMI0_GPIOZ 5 -#define RST_SCMI0_CRYP1 6 -#define RST_SCMI0_HASH1 7 -#define RST_SCMI0_RNG1 8 -#define RST_SCMI0_MDMA 9 -#define RST_SCMI0_MCU 10 -#define RST_SCMI0_MCU_HOLD_BOOT 11 +#define RST_SCMI_SPI6 0 +#define RST_SCMI_I2C4 1 +#define RST_SCMI_I2C6 2 +#define RST_SCMI_USART1 3 +#define RST_SCMI_STGEN 4 +#define RST_SCMI_GPIOZ 5 +#define RST_SCMI_CRYP1 6 +#define RST_SCMI_HASH1 7 +#define RST_SCMI_RNG1 8 +#define RST_SCMI_MDMA 9 +#define RST_SCMI_MCU 10 +#define RST_SCMI_MCU_HOLD_BOOT 11 #endif /* _DT_BINDINGS_STM32MP1_RESET_H_ */ diff --git a/include/dt-bindings/reset/tegra234-reset.h b/include/dt-bindings/reset/tegra234-reset.h index 1362cd5e03f0..547ca3b60caa 100644 --- a/include/dt-bindings/reset/tegra234-reset.h +++ b/include/dt-bindings/reset/tegra234-reset.h @@ -40,6 +40,8 @@ #define TEGRA234_RESET_PWM6 73U #define TEGRA234_RESET_PWM7 74U #define TEGRA234_RESET_PWM8 75U +#define TEGRA234_RESET_QSPI0 76U +#define TEGRA234_RESET_QSPI1 77U #define TEGRA234_RESET_SDMMC4 85U #define TEGRA234_RESET_UARTA 100U #define TEGRA234_RESET_PEX0_CORE_0 116U |