diff options
author | Joe Perches <joe@perches.com> | 2014-09-13 01:56:56 +0400 |
---|---|---|
committer | Ulf Hansson <ulf.hansson@linaro.org> | 2014-09-24 12:13:09 +0400 |
commit | 6606110d89aefcb21b9e70adfe064987cbd8393a (patch) | |
tree | 599b064df3762b1da4d28f4e6ec9df0afcfacdd5 | |
parent | 48d11e067fc90ec9fc9c8f7ab982e5a83bf1887b (diff) | |
download | linux-6606110d89aefcb21b9e70adfe064987cbd8393a.tar.xz |
mmc: Convert pr_warning to pr_warn
Use the much more common pr_warn instead of pr_warning.
Other miscellanea:
o Coalesce formats
o Realign arguments
o Remove extra spaces when coalescing formats
Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
-rw-r--r-- | drivers/mmc/card/block.c | 4 | ||||
-rw-r--r-- | drivers/mmc/card/queue.c | 6 | ||||
-rw-r--r-- | drivers/mmc/card/sdio_uart.c | 9 | ||||
-rw-r--r-- | drivers/mmc/core/core.c | 8 | ||||
-rw-r--r-- | drivers/mmc/core/mmc.c | 17 | ||||
-rw-r--r-- | drivers/mmc/core/mmc_ops.c | 4 | ||||
-rw-r--r-- | drivers/mmc/core/sd.c | 33 | ||||
-rw-r--r-- | drivers/mmc/core/sdio.c | 7 | ||||
-rw-r--r-- | drivers/mmc/core/sdio_bus.c | 4 | ||||
-rw-r--r-- | drivers/mmc/core/sdio_irq.c | 7 | ||||
-rw-r--r-- | drivers/mmc/host/s3cmci.c | 3 | ||||
-rw-r--r-- | drivers/mmc/host/sdhci.c | 34 | ||||
-rw-r--r-- | drivers/mmc/host/tifm_sd.c | 4 | ||||
-rw-r--r-- | drivers/mmc/host/wbsd.c | 21 |
14 files changed, 69 insertions, 92 deletions
diff --git a/drivers/mmc/card/block.c b/drivers/mmc/card/block.c index 5d2799730a32..1fa4c80ff886 100644 --- a/drivers/mmc/card/block.c +++ b/drivers/mmc/card/block.c @@ -1928,8 +1928,8 @@ static int mmc_blk_issue_rw_rq(struct mmc_queue *mq, struct request *rqc) case MMC_BLK_ECC_ERR: if (brq->data.blocks > 1) { /* Redo read one sector at a time */ - pr_warning("%s: retrying using single block read\n", - req->rq_disk->disk_name); + pr_warn("%s: retrying using single block read\n", + req->rq_disk->disk_name); disable_multi = 1; break; } diff --git a/drivers/mmc/card/queue.c b/drivers/mmc/card/queue.c index 3e049c13429c..feea926e32f8 100644 --- a/drivers/mmc/card/queue.c +++ b/drivers/mmc/card/queue.c @@ -229,14 +229,12 @@ int mmc_init_queue(struct mmc_queue *mq, struct mmc_card *card, if (bouncesz > 512) { mqrq_cur->bounce_buf = kmalloc(bouncesz, GFP_KERNEL); if (!mqrq_cur->bounce_buf) { - pr_warning("%s: unable to " - "allocate bounce cur buffer\n", + pr_warn("%s: unable to allocate bounce cur buffer\n", mmc_card_name(card)); } mqrq_prev->bounce_buf = kmalloc(bouncesz, GFP_KERNEL); if (!mqrq_prev->bounce_buf) { - pr_warning("%s: unable to " - "allocate bounce prev buffer\n", + pr_warn("%s: unable to allocate bounce prev buffer\n", mmc_card_name(card)); kfree(mqrq_cur->bounce_buf); mqrq_cur->bounce_buf = NULL; diff --git a/drivers/mmc/card/sdio_uart.c b/drivers/mmc/card/sdio_uart.c index f093cea0d060..d2de5925b73e 100644 --- a/drivers/mmc/card/sdio_uart.c +++ b/drivers/mmc/card/sdio_uart.c @@ -1063,8 +1063,8 @@ static int sdio_uart_probe(struct sdio_func *func, return -ENOMEM; if (func->class == SDIO_CLASS_UART) { - pr_warning("%s: need info on UART class basic setup\n", - sdio_func_id(func)); + pr_warn("%s: need info on UART class basic setup\n", + sdio_func_id(func)); kfree(port); return -ENOSYS; } else if (func->class == SDIO_CLASS_GPS) { @@ -1082,9 +1082,8 @@ static int sdio_uart_probe(struct sdio_func *func, break; } if (!tpl) { - pr_warning( - "%s: can't find tuple 0x91 subtuple 0 (SUBTPL_SIOREG) for GPS class\n", - sdio_func_id(func)); + pr_warn("%s: can't find tuple 0x91 subtuple 0 (SUBTPL_SIOREG) for GPS class\n", + sdio_func_id(func)); kfree(port); return -EINVAL; } diff --git a/drivers/mmc/core/core.c b/drivers/mmc/core/core.c index e2e1dd40fb11..b1e209f479ad 100644 --- a/drivers/mmc/core/core.c +++ b/drivers/mmc/core/core.c @@ -433,8 +433,8 @@ static void mmc_wait_for_req_done(struct mmc_host *host, */ if (cmd->sanitize_busy && cmd->error == -ETIMEDOUT) { if (!mmc_interrupt_hpi(host->card)) { - pr_warning("%s: %s: Interrupted sanitize\n", - mmc_hostname(host), __func__); + pr_warn("%s: %s: Interrupted sanitize\n", + mmc_hostname(host), __func__); cmd->error = 0; break; } else { @@ -1417,8 +1417,8 @@ int mmc_set_signal_voltage(struct mmc_host *host, int signal_voltage, u32 ocr) if (!host->ops->start_signal_voltage_switch) return -EPERM; if (!host->ops->card_busy) - pr_warning("%s: cannot verify signal voltage switch\n", - mmc_hostname(host)); + pr_warn("%s: cannot verify signal voltage switch\n", + mmc_hostname(host)); cmd.opcode = SD_SWITCH_VOLTAGE; cmd.arg = 0; diff --git a/drivers/mmc/core/mmc.c b/drivers/mmc/core/mmc.c index 6390787fb32a..a301a78a2bd1 100644 --- a/drivers/mmc/core/mmc.c +++ b/drivers/mmc/core/mmc.c @@ -226,9 +226,7 @@ static int mmc_get_ext_csd(struct mmc_card *card, u8 **new_ext_csd) "Card will be ignored.\n", mmc_hostname(card->host)); } else { - pr_warning("%s: unable to read " - "EXT_CSD, performance might " - "suffer.\n", + pr_warn("%s: unable to read EXT_CSD, performance might suffer\n", mmc_hostname(card->host)); err = 0; } @@ -816,8 +814,8 @@ static int __mmc_select_powerclass(struct mmc_card *card, ext_csd->raw_pwr_cl_200_360; break; default: - pr_warning("%s: Voltage range not supported " - "for power class.\n", mmc_hostname(host)); + pr_warn("%s: Voltage range not supported for power class\n", + mmc_hostname(host)); return -EINVAL; } @@ -1490,8 +1488,8 @@ static int mmc_init_card(struct mmc_host *host, u32 ocr, if (err && err != -EBADMSG) goto free_card; if (err) { - pr_warning("%s: Enabling HPI failed\n", - mmc_hostname(card->host)); + pr_warn("%s: Enabling HPI failed\n", + mmc_hostname(card->host)); err = 0; } else card->ext_csd.hpi_en = 1; @@ -1512,9 +1510,8 @@ static int mmc_init_card(struct mmc_host *host, u32 ocr, * Only if no error, cache is turned on successfully. */ if (err) { - pr_warning("%s: Cache is supported, " - "but failed to turn on (%d)\n", - mmc_hostname(card->host), err); + pr_warn("%s: Cache is supported, but failed to turn on (%d)\n", + mmc_hostname(card->host), err); card->ext_csd.cache_ctrl = 0; err = 0; } else { diff --git a/drivers/mmc/core/mmc_ops.c b/drivers/mmc/core/mmc_ops.c index ba0275e90617..7911e0510a1d 100644 --- a/drivers/mmc/core/mmc_ops.c +++ b/drivers/mmc/core/mmc_ops.c @@ -649,8 +649,8 @@ int mmc_send_hpi_cmd(struct mmc_card *card, u32 *status) int err; if (!card->ext_csd.hpi) { - pr_warning("%s: Card didn't support HPI command\n", - mmc_hostname(card->host)); + pr_warn("%s: Card didn't support HPI command\n", + mmc_hostname(card->host)); return -EINVAL; } diff --git a/drivers/mmc/core/sd.c b/drivers/mmc/core/sd.c index 25913889cbaa..d90a6de7901d 100644 --- a/drivers/mmc/core/sd.c +++ b/drivers/mmc/core/sd.c @@ -229,8 +229,8 @@ static int mmc_read_ssr(struct mmc_card *card) u32 *ssr; if (!(card->csd.cmdclass & CCC_APP_SPEC)) { - pr_warning("%s: card lacks mandatory SD Status " - "function.\n", mmc_hostname(card->host)); + pr_warn("%s: card lacks mandatory SD Status function\n", + mmc_hostname(card->host)); return 0; } @@ -240,8 +240,8 @@ static int mmc_read_ssr(struct mmc_card *card) err = mmc_app_sd_status(card, ssr); if (err) { - pr_warning("%s: problem reading SD Status " - "register.\n", mmc_hostname(card->host)); + pr_warn("%s: problem reading SD Status register\n", + mmc_hostname(card->host)); err = 0; goto out; } @@ -265,8 +265,8 @@ static int mmc_read_ssr(struct mmc_card *card) card->ssr.erase_offset = eo * 1000; } } else { - pr_warning("%s: SD Status: Invalid Allocation Unit size.\n", - mmc_hostname(card->host)); + pr_warn("%s: SD Status: Invalid Allocation Unit size\n", + mmc_hostname(card->host)); } } out: @@ -286,8 +286,7 @@ static int mmc_read_switch(struct mmc_card *card) return 0; if (!(card->csd.cmdclass & CCC_SWITCH)) { - pr_warning("%s: card lacks mandatory switch " - "function, performance might suffer.\n", + pr_warn("%s: card lacks mandatory switch function, performance might suffer\n", mmc_hostname(card->host)); return 0; } @@ -316,7 +315,7 @@ static int mmc_read_switch(struct mmc_card *card) if (err != -EINVAL && err != -ENOSYS && err != -EFAULT) goto out; - pr_warning("%s: problem reading Bus Speed modes.\n", + pr_warn("%s: problem reading Bus Speed modes\n", mmc_hostname(card->host)); err = 0; @@ -372,8 +371,7 @@ int mmc_sd_switch_hs(struct mmc_card *card) goto out; if ((status[16] & 0xF) != 1) { - pr_warning("%s: Problem switching card " - "into high-speed mode!\n", + pr_warn("%s: Problem switching card into high-speed mode!\n", mmc_hostname(card->host)); err = 0; } else { @@ -440,7 +438,7 @@ static int sd_select_driver_type(struct mmc_card *card, u8 *status) return err; if ((status[15] & 0xF) != drive_strength) { - pr_warning("%s: Problem setting drive strength!\n", + pr_warn("%s: Problem setting drive strength!\n", mmc_hostname(card->host)); return 0; } @@ -518,7 +516,7 @@ static int sd_set_bus_speed_mode(struct mmc_card *card, u8 *status) return err; if ((status[16] & 0xF) != card->sd_bus_speed) - pr_warning("%s: Problem setting bus speed mode!\n", + pr_warn("%s: Problem setting bus speed mode!\n", mmc_hostname(card->host)); else { mmc_set_timing(card->host, timing); @@ -598,7 +596,7 @@ static int sd_set_current_limit(struct mmc_card *card, u8 *status) return err; if (((status[15] >> 4) & 0x0F) != current_limit) - pr_warning("%s: Problem setting current limit!\n", + pr_warn("%s: Problem setting current limit!\n", mmc_hostname(card->host)); } @@ -727,8 +725,7 @@ int mmc_sd_get_cid(struct mmc_host *host, u32 ocr, u32 *cid, u32 *rocr) try_again: if (!retries) { ocr &= ~SD_OCR_S18R; - pr_warning("%s: Skipping voltage switch\n", - mmc_hostname(host)); + pr_warn("%s: Skipping voltage switch\n", mmc_hostname(host)); } /* @@ -872,9 +869,7 @@ int mmc_sd_setup_card(struct mmc_host *host, struct mmc_card *card, } if (ro < 0) { - pr_warning("%s: host does not " - "support reading read-only " - "switch. assuming write-enable.\n", + pr_warn("%s: host does not support reading read-only switch, assuming write-enable\n", mmc_hostname(host)); } else if (ro > 0) { mmc_card_set_readonly(card); diff --git a/drivers/mmc/core/sdio.c b/drivers/mmc/core/sdio.c index 3fc40a7140a8..2439e717655b 100644 --- a/drivers/mmc/core/sdio.c +++ b/drivers/mmc/core/sdio.c @@ -216,8 +216,8 @@ static int sdio_enable_wide(struct mmc_card *card) return ret; if ((ctrl & SDIO_BUS_WIDTH_MASK) == SDIO_BUS_WIDTH_RESERVED) - pr_warning("%s: SDIO_CCCR_IF is invalid: 0x%02x\n", - mmc_hostname(card->host), ctrl); + pr_warn("%s: SDIO_CCCR_IF is invalid: 0x%02x\n", + mmc_hostname(card->host), ctrl); /* set as 4-bit bus width */ ctrl &= ~SDIO_BUS_WIDTH_MASK; @@ -605,8 +605,7 @@ static int mmc_sdio_init_card(struct mmc_host *host, u32 ocr, try_again: if (!retries) { - pr_warning("%s: Skipping voltage switch\n", - mmc_hostname(host)); + pr_warn("%s: Skipping voltage switch\n", mmc_hostname(host)); ocr &= ~R4_18V_PRESENT; } diff --git a/drivers/mmc/core/sdio_bus.c b/drivers/mmc/core/sdio_bus.c index 4fa8fef9147f..e4eb456df4ac 100644 --- a/drivers/mmc/core/sdio_bus.c +++ b/drivers/mmc/core/sdio_bus.c @@ -177,8 +177,8 @@ static int sdio_bus_remove(struct device *dev) drv->remove(func); if (func->irq_handler) { - pr_warning("WARNING: driver %s did not remove " - "its interrupt handler!\n", drv->name); + pr_warn("WARNING: driver %s did not remove its interrupt handler!\n", + drv->name); sdio_claim_host(func); sdio_release_irq(func); sdio_release_host(func); diff --git a/drivers/mmc/core/sdio_irq.c b/drivers/mmc/core/sdio_irq.c index 696eca493844..09cc67d028f0 100644 --- a/drivers/mmc/core/sdio_irq.c +++ b/drivers/mmc/core/sdio_irq.c @@ -69,16 +69,15 @@ static int process_sdio_pending_irqs(struct mmc_host *host) if (pending & (1 << i)) { func = card->sdio_func[i - 1]; if (!func) { - pr_warning("%s: pending IRQ for " - "non-existent function\n", + pr_warn("%s: pending IRQ for non-existent function\n", mmc_card_id(card)); ret = -EINVAL; } else if (func->irq_handler) { func->irq_handler(func); count++; } else { - pr_warning("%s: pending IRQ with no handler\n", - sdio_func_id(func)); + pr_warn("%s: pending IRQ with no handler\n", + sdio_func_id(func)); ret = -EINVAL; } } diff --git a/drivers/mmc/host/s3cmci.c b/drivers/mmc/host/s3cmci.c index e4e1a5388163..94cddf381ba3 100644 --- a/drivers/mmc/host/s3cmci.c +++ b/drivers/mmc/host/s3cmci.c @@ -985,7 +985,8 @@ static int s3cmci_setup_data(struct s3cmci_host *host, struct mmc_data *data) * one block being transferred. */ if (data->blocks > 1) { - pr_warning("%s: can't do non-word sized block transfers (blksz %d)\n", __func__, data->blksz); + pr_warn("%s: can't do non-word sized block transfers (blksz %d)\n", + __func__, data->blksz); return -EINVAL; } } diff --git a/drivers/mmc/host/sdhci.c b/drivers/mmc/host/sdhci.c index 7481bd863502..db113aba35d0 100644 --- a/drivers/mmc/host/sdhci.c +++ b/drivers/mmc/host/sdhci.c @@ -1754,8 +1754,8 @@ static int sdhci_do_start_signal_voltage_switch(struct sdhci_host *host, ret = regulator_set_voltage(mmc->supply.vqmmc, 2700000, 3600000); if (ret) { - pr_warning("%s: Switching to 3.3V signalling voltage " - " failed\n", mmc_hostname(mmc)); + pr_warn("%s: Switching to 3.3V signalling voltage failed\n", + mmc_hostname(mmc)); return -EIO; } } @@ -1767,8 +1767,8 @@ static int sdhci_do_start_signal_voltage_switch(struct sdhci_host *host, if (!(ctrl & SDHCI_CTRL_VDD_180)) return 0; - pr_warning("%s: 3.3V regulator output did not became stable\n", - mmc_hostname(mmc)); + pr_warn("%s: 3.3V regulator output did not became stable\n", + mmc_hostname(mmc)); return -EAGAIN; case MMC_SIGNAL_VOLTAGE_180: @@ -1776,8 +1776,8 @@ static int sdhci_do_start_signal_voltage_switch(struct sdhci_host *host, ret = regulator_set_voltage(mmc->supply.vqmmc, 1700000, 1950000); if (ret) { - pr_warning("%s: Switching to 1.8V signalling voltage " - " failed\n", mmc_hostname(mmc)); + pr_warn("%s: Switching to 1.8V signalling voltage failed\n", + mmc_hostname(mmc)); return -EIO; } } @@ -1794,8 +1794,8 @@ static int sdhci_do_start_signal_voltage_switch(struct sdhci_host *host, if (ctrl & SDHCI_CTRL_VDD_180) return 0; - pr_warning("%s: 1.8V regulator output did not became stable\n", - mmc_hostname(mmc)); + pr_warn("%s: 1.8V regulator output did not became stable\n", + mmc_hostname(mmc)); return -EAGAIN; case MMC_SIGNAL_VOLTAGE_120: @@ -1803,8 +1803,8 @@ static int sdhci_do_start_signal_voltage_switch(struct sdhci_host *host, ret = regulator_set_voltage(mmc->supply.vqmmc, 1100000, 1300000); if (ret) { - pr_warning("%s: Switching to 1.2V signalling voltage " - " failed\n", mmc_hostname(mmc)); + pr_warn("%s: Switching to 1.2V signalling voltage failed\n", + mmc_hostname(mmc)); return -EIO; } } @@ -2844,8 +2844,7 @@ int sdhci_add_host(struct sdhci_host *host) if (host->flags & (SDHCI_USE_SDMA | SDHCI_USE_ADMA)) { if (host->ops->enable_dma) { if (host->ops->enable_dma(host)) { - pr_warning("%s: No suitable DMA " - "available. Falling back to PIO.\n", + pr_warn("%s: No suitable DMA available - falling back to PIO\n", mmc_hostname(mmc)); host->flags &= ~(SDHCI_USE_SDMA | SDHCI_USE_ADMA); @@ -2867,15 +2866,14 @@ int sdhci_add_host(struct sdhci_host *host) dma_free_coherent(mmc_dev(mmc), ADMA_SIZE, host->adma_desc, host->adma_addr); kfree(host->align_buffer); - pr_warning("%s: Unable to allocate ADMA " - "buffers. Falling back to standard DMA.\n", + pr_warn("%s: Unable to allocate ADMA buffers - falling back to standard DMA\n", mmc_hostname(mmc)); host->flags &= ~SDHCI_USE_ADMA; host->adma_desc = NULL; host->align_buffer = NULL; } else if (host->adma_addr & 3) { - pr_warning("%s: unable to allocate aligned ADMA descriptor\n", - mmc_hostname(mmc)); + pr_warn("%s: unable to allocate aligned ADMA descriptor\n", + mmc_hostname(mmc)); host->flags &= ~SDHCI_USE_ADMA; dma_free_coherent(mmc_dev(mmc), ADMA_SIZE, host->adma_desc, host->adma_addr); @@ -3202,8 +3200,8 @@ int sdhci_add_host(struct sdhci_host *host) mmc->max_blk_size = (caps[0] & SDHCI_MAX_BLOCK_MASK) >> SDHCI_MAX_BLOCK_SHIFT; if (mmc->max_blk_size >= 3) { - pr_warning("%s: Invalid maximum block size, " - "assuming 512 bytes\n", mmc_hostname(mmc)); + pr_warn("%s: Invalid maximum block size, assuming 512 bytes\n", + mmc_hostname(mmc)); mmc->max_blk_size = 0; } } diff --git a/drivers/mmc/host/tifm_sd.c b/drivers/mmc/host/tifm_sd.c index d1760ebcac03..93c4b40df90a 100644 --- a/drivers/mmc/host/tifm_sd.c +++ b/drivers/mmc/host/tifm_sd.c @@ -952,8 +952,8 @@ static int tifm_sd_probe(struct tifm_dev *sock) if (!(TIFM_SOCK_STATE_OCCUPIED & readl(sock->addr + SOCK_PRESENT_STATE))) { - pr_warning("%s : card gone, unexpectedly\n", - dev_name(&sock->dev)); + pr_warn("%s : card gone, unexpectedly\n", + dev_name(&sock->dev)); return rc; } diff --git a/drivers/mmc/host/wbsd.c b/drivers/mmc/host/wbsd.c index 1defd5ed3236..9a6dfb0c4ecc 100644 --- a/drivers/mmc/host/wbsd.c +++ b/drivers/mmc/host/wbsd.c @@ -803,8 +803,7 @@ static void wbsd_request(struct mmc_host *mmc, struct mmc_request *mrq) default: #ifdef CONFIG_MMC_DEBUG - pr_warning("%s: Data command %d is not " - "supported by this controller.\n", + pr_warn("%s: Data command %d is not supported by this controller\n", mmc_hostname(host->mmc), cmd->opcode); #endif cmd->error = -EINVAL; @@ -1429,8 +1428,8 @@ free: free_dma(dma); err: - pr_warning(DRIVER_NAME ": Unable to allocate DMA %d. " - "Falling back on FIFO.\n", dma); + pr_warn(DRIVER_NAME ": Unable to allocate DMA %d - falling back on FIFO\n", + dma); } static void wbsd_release_dma(struct wbsd_host *host) @@ -1664,9 +1663,7 @@ static int wbsd_init(struct device *dev, int base, int irq, int dma, ret = wbsd_scan(host); if (ret) { if (pnp && (ret == -ENODEV)) { - pr_warning(DRIVER_NAME - ": Unable to confirm device presence. You may " - "experience lock-ups.\n"); + pr_warn(DRIVER_NAME ": Unable to confirm device presence - you may experience lock-ups\n"); } else { wbsd_free_mmc(dev); return ret; @@ -1688,10 +1685,7 @@ static int wbsd_init(struct device *dev, int base, int irq, int dma, */ if (pnp) { if ((host->config != 0) && !wbsd_chip_validate(host)) { - pr_warning(DRIVER_NAME - ": PnP active but chip not configured! " - "You probably have a buggy BIOS. " - "Configuring chip manually.\n"); + pr_warn(DRIVER_NAME ": PnP active but chip not configured! You probably have a buggy BIOS. Configuring chip manually.\n"); wbsd_chip_config(host); } } else @@ -1884,10 +1878,7 @@ static int wbsd_pnp_resume(struct pnp_dev *pnp_dev) */ if (host->config != 0) { if (!wbsd_chip_validate(host)) { - pr_warning(DRIVER_NAME - ": PnP active but chip not configured! " - "You probably have a buggy BIOS. " - "Configuring chip manually.\n"); + pr_warn(DRIVER_NAME ": PnP active but chip not configured! You probably have a buggy BIOS. Configuring chip manually.\n"); wbsd_chip_config(host); } } |