Merge tag 'imx-fixes-3.17' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into fixes

Merge "ARM: imx: fixes for 3.17" from Shawn Guo:

The i.MX fixes for 3.17:
 - A correction on imx6dl gpu axi clock setting
 - Fix a compilation error which comes after ARMv6K SMP build is allowed
 - Fix a typo with pinctrl_esdhc1 in vf610-twr dts
 - Correct i.MX6SX pad setting for UART in dts
 - Fix i.MX53 VPU clock settings in dts
 - Fix a suspend/resume failure seen on Cubox-i board, which is caused
   by TLB missing of IOMUXC base address during suspend
 - ARCH_HAS_OPP has been removed by commit 78c5e0bb145d (PM / OPP:
   Remove ARCH_HAS_OPP), so we need to kill it for IMX
 - A small fix on enet reset pin of edmqmx6 board

* tag 'imx-fixes-3.17' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux:
  ARM: dts: imx6sx: fix the pad setting for uart CTS_B
  ARM: dts: i.MX53: fix apparent bug in VPU clks
  ARM: imx: correct gpu2d_axi and gpu3d_axi clock setting
  ARM: dts: imx6: edmqmx6: change enet reset pin
  ARM: dts: vf610-twr: Fix pinctrl_esdhc1 pin definitions.
  ARM: imx: remove unnecessary ARCH_HAS_OPP select
  ARM: imx: fix TLB missing of IOMUXC base address during suspend
  ARM: imx6: fix SMP compilation again

Signed-off-by: Olof Johansson <olof@lixom.net>

8 files changed, 29 insertions, 20 deletions

diff --git a/arch/arm/boot/dts/imx53.dtsi b/arch/arm/boot/dts/imx53.dtsi
index 64fa27b36be0..c6c58c1c00e3 100644
--- a/arch/arm/boot/dts/imx53.dtsi
+++ b/arch/arm/boot/dts/imx53.dtsi
@@ -731,7 +731,7 @@
 				compatible = "fsl,imx53-vpu";
 				reg = <0x63ff4000 0x1000>;
 				interrupts = <9>;
-				clocks = <&clks IMX5_CLK_VPU_GATE>,
+				clocks = <&clks IMX5_CLK_VPU_REFERENCE_GATE>,
 				         <&clks IMX5_CLK_VPU_GATE>;
 				clock-names = "per", "ahb";
 				resets = <&src 1>;
diff --git a/arch/arm/boot/dts/imx6q-dmo-edmqmx6.dts b/arch/arm/boot/dts/imx6q-dmo-edmqmx6.dts
index 8c1cb53464a0..4fa254347798 100644
--- a/arch/arm/boot/dts/imx6q-dmo-edmqmx6.dts
+++ b/arch/arm/boot/dts/imx6q-dmo-edmqmx6.dts
@@ -119,7 +119,7 @@
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_enet>;
 	phy-mode = "rgmii";
-	phy-reset-gpios = <&gpio3 23 0>;
+	phy-reset-gpios = <&gpio1 25 0>;
 	phy-supply = <&vgen2_1v2_eth>;
 	status = "okay";
 };
@@ -339,6 +339,7 @@
 				MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK	0x1b0b0
 				MX6QDL_PAD_ENET_MDIO__ENET_MDIO		0x1b0b0
 				MX6QDL_PAD_ENET_MDC__ENET_MDC		0x1b0b0
+				MX6QDL_PAD_ENET_CRS_DV__GPIO1_IO25	0x1b0b0
 				MX6QDL_PAD_GPIO_16__ENET_REF_CLK	0x4001b0a8
 			>;
 		};
diff --git a/arch/arm/boot/dts/imx6sx-pinfunc.h b/arch/arm/boot/dts/imx6sx-pinfunc.h
index 3e0b816dac08..bb9c6b78cb97 100644
--- a/arch/arm/boot/dts/imx6sx-pinfunc.h
+++ b/arch/arm/boot/dts/imx6sx-pinfunc.h
@@ -78,7 +78,7 @@
 #define MX6SX_PAD_GPIO1_IO07__USDHC2_WP                           0x0030 0x0378 0x0870 0x1 0x1
 #define MX6SX_PAD_GPIO1_IO07__ENET2_MDIO                          0x0030 0x0378 0x0770 0x2 0x0
 #define MX6SX_PAD_GPIO1_IO07__AUDMUX_MCLK                         0x0030 0x0378 0x0000 0x3 0x0
-#define MX6SX_PAD_GPIO1_IO07__UART1_CTS_B                         0x0030 0x0378 0x082C 0x4 0x1
+#define MX6SX_PAD_GPIO1_IO07__UART1_CTS_B                         0x0030 0x0378 0x0000 0x4 0x0
 #define MX6SX_PAD_GPIO1_IO07__GPIO1_IO_7                          0x0030 0x0378 0x0000 0x5 0x0
 #define MX6SX_PAD_GPIO1_IO07__SRC_EARLY_RESET                     0x0030 0x0378 0x0000 0x6 0x0
 #define MX6SX_PAD_GPIO1_IO07__DCIC2_OUT                           0x0030 0x0378 0x0000 0x7 0x0
@@ -96,7 +96,7 @@
 #define MX6SX_PAD_GPIO1_IO09__WDOG2_WDOG_B                        0x0038 0x0380 0x0000 0x1 0x0
 #define MX6SX_PAD_GPIO1_IO09__SDMA_EXT_EVENT_1                    0x0038 0x0380 0x0820 0x2 0x0
 #define MX6SX_PAD_GPIO1_IO09__CCM_OUT0                            0x0038 0x0380 0x0000 0x3 0x0
-#define MX6SX_PAD_GPIO1_IO09__UART2_CTS_B                         0x0038 0x0380 0x0834 0x4 0x1
+#define MX6SX_PAD_GPIO1_IO09__UART2_CTS_B                         0x0038 0x0380 0x0000 0x4 0x0
 #define MX6SX_PAD_GPIO1_IO09__GPIO1_IO_9                          0x0038 0x0380 0x0000 0x5 0x0
 #define MX6SX_PAD_GPIO1_IO09__SRC_INT_BOOT                        0x0038 0x0380 0x0000 0x6 0x0
 #define MX6SX_PAD_GPIO1_IO09__OBSERVE_MUX_OUT_4                   0x0038 0x0380 0x0000 0x7 0x0
@@ -213,7 +213,7 @@
 #define MX6SX_PAD_CSI_DATA07__ESAI_TX3_RX2                        0x0068 0x03B0 0x079C 0x1 0x1
 #define MX6SX_PAD_CSI_DATA07__I2C4_SDA                            0x0068 0x03B0 0x07C4 0x2 0x2
 #define MX6SX_PAD_CSI_DATA07__KPP_ROW_7                           0x0068 0x03B0 0x07DC 0x3 0x0
-#define MX6SX_PAD_CSI_DATA07__UART6_CTS_B                         0x0068 0x03B0 0x0854 0x4 0x1
+#define MX6SX_PAD_CSI_DATA07__UART6_CTS_B                         0x0068 0x03B0 0x0000 0x4 0x0
 #define MX6SX_PAD_CSI_DATA07__GPIO1_IO_21                         0x0068 0x03B0 0x0000 0x5 0x0
 #define MX6SX_PAD_CSI_DATA07__WEIM_DATA_16                        0x0068 0x03B0 0x0000 0x6 0x0
 #define MX6SX_PAD_CSI_DATA07__DCIC1_OUT                           0x0068 0x03B0 0x0000 0x7 0x0
@@ -254,7 +254,7 @@
 #define MX6SX_PAD_CSI_VSYNC__CSI1_VSYNC                           0x0078 0x03C0 0x0708 0x0 0x0
 #define MX6SX_PAD_CSI_VSYNC__ESAI_TX5_RX0                         0x0078 0x03C0 0x07A4 0x1 0x1
 #define MX6SX_PAD_CSI_VSYNC__AUDMUX_AUD6_RXD                      0x0078 0x03C0 0x0674 0x2 0x1
-#define MX6SX_PAD_CSI_VSYNC__UART4_CTS_B                          0x0078 0x03C0 0x0844 0x3 0x3
+#define MX6SX_PAD_CSI_VSYNC__UART4_CTS_B                          0x0078 0x03C0 0x0000 0x3 0x0
 #define MX6SX_PAD_CSI_VSYNC__MQS_RIGHT                            0x0078 0x03C0 0x0000 0x4 0x0
 #define MX6SX_PAD_CSI_VSYNC__GPIO1_IO_25                          0x0078 0x03C0 0x0000 0x5 0x0
 #define MX6SX_PAD_CSI_VSYNC__WEIM_DATA_24                         0x0078 0x03C0 0x0000 0x6 0x0
@@ -352,7 +352,7 @@
 #define MX6SX_PAD_ENET2_TX_CLK__ENET2_TX_CLK                      0x00A0 0x03E8 0x0000 0x0 0x0
 #define MX6SX_PAD_ENET2_TX_CLK__ENET2_REF_CLK2                    0x00A0 0x03E8 0x076C 0x1 0x1
 #define MX6SX_PAD_ENET2_TX_CLK__I2C3_SDA                          0x00A0 0x03E8 0x07BC 0x2 0x1
-#define MX6SX_PAD_ENET2_TX_CLK__UART1_CTS_B                       0x00A0 0x03E8 0x082C 0x3 0x3
+#define MX6SX_PAD_ENET2_TX_CLK__UART1_CTS_B                       0x00A0 0x03E8 0x0000 0x3 0x0
 #define MX6SX_PAD_ENET2_TX_CLK__MLB_CLK                           0x00A0 0x03E8 0x07E8 0x4 0x1
 #define MX6SX_PAD_ENET2_TX_CLK__GPIO2_IO_9                        0x00A0 0x03E8 0x0000 0x5 0x0
 #define MX6SX_PAD_ENET2_TX_CLK__USB_OTG2_PWR                      0x00A0 0x03E8 0x0000 0x6 0x0
@@ -404,7 +404,7 @@
 #define MX6SX_PAD_KEY_COL4__SAI2_RX_BCLK                          0x00B4 0x03FC 0x0808 0x7 0x0
 #define MX6SX_PAD_KEY_ROW0__KPP_ROW_0                             0x00B8 0x0400 0x0000 0x0 0x0
 #define MX6SX_PAD_KEY_ROW0__USDHC3_WP                             0x00B8 0x0400 0x0000 0x1 0x0
-#define MX6SX_PAD_KEY_ROW0__UART6_CTS_B                           0x00B8 0x0400 0x0854 0x2 0x3
+#define MX6SX_PAD_KEY_ROW0__UART6_CTS_B                           0x00B8 0x0400 0x0000 0x2 0x0
 #define MX6SX_PAD_KEY_ROW0__ECSPI1_MOSI                           0x00B8 0x0400 0x0718 0x3 0x0
 #define MX6SX_PAD_KEY_ROW0__AUDMUX_AUD5_TXD                       0x00B8 0x0400 0x0660 0x4 0x0
 #define MX6SX_PAD_KEY_ROW0__GPIO2_IO_15                           0x00B8 0x0400 0x0000 0x5 0x0
@@ -423,7 +423,7 @@
 #define MX6SX_PAD_KEY_ROW1__M4_NMI                                0x00BC 0x0404 0x0000 0x8 0x0
 #define MX6SX_PAD_KEY_ROW2__KPP_ROW_2                             0x00C0 0x0408 0x0000 0x0 0x0
 #define MX6SX_PAD_KEY_ROW2__USDHC4_WP                             0x00C0 0x0408 0x0878 0x1 0x1
-#define MX6SX_PAD_KEY_ROW2__UART5_CTS_B                           0x00C0 0x0408 0x084C 0x2 0x3
+#define MX6SX_PAD_KEY_ROW2__UART5_CTS_B                           0x00C0 0x0408 0x0000 0x2 0x0
 #define MX6SX_PAD_KEY_ROW2__CAN1_RX                               0x00C0 0x0408 0x068C 0x3 0x1
 #define MX6SX_PAD_KEY_ROW2__CANFD_RX1                             0x00C0 0x0408 0x0694 0x4 0x1
 #define MX6SX_PAD_KEY_ROW2__GPIO2_IO_17                           0x00C0 0x0408 0x0000 0x5 0x0
@@ -815,7 +815,7 @@
 #define MX6SX_PAD_NAND_DATA05__RAWNAND_DATA05                     0x0164 0x04AC 0x0000 0x0 0x0
 #define MX6SX_PAD_NAND_DATA05__USDHC2_DATA5                       0x0164 0x04AC 0x0000 0x1 0x0
 #define MX6SX_PAD_NAND_DATA05__QSPI2_B_DQS                        0x0164 0x04AC 0x0000 0x2 0x0
-#define MX6SX_PAD_NAND_DATA05__UART3_CTS_B                        0x0164 0x04AC 0x083C 0x3 0x1
+#define MX6SX_PAD_NAND_DATA05__UART3_CTS_B                        0x0164 0x04AC 0x0000 0x3 0x0
 #define MX6SX_PAD_NAND_DATA05__AUDMUX_AUD4_RXC                    0x0164 0x04AC 0x064C 0x4 0x0
 #define MX6SX_PAD_NAND_DATA05__GPIO4_IO_9                         0x0164 0x04AC 0x0000 0x5 0x0
 #define MX6SX_PAD_NAND_DATA05__WEIM_AD_5                          0x0164 0x04AC 0x0000 0x6 0x0
@@ -957,7 +957,7 @@
 #define MX6SX_PAD_QSPI1A_SS1_B__SIM_M_HADDR_12                    0x019C 0x04E4 0x0000 0x7 0x0
 #define MX6SX_PAD_QSPI1A_SS1_B__SDMA_DEBUG_PC_3                   0x019C 0x04E4 0x0000 0x9 0x0
 #define MX6SX_PAD_QSPI1B_DATA0__QSPI1_B_DATA_0                    0x01A0 0x04E8 0x0000 0x0 0x0
-#define MX6SX_PAD_QSPI1B_DATA0__UART3_CTS_B                       0x01A0 0x04E8 0x083C 0x1 0x4
+#define MX6SX_PAD_QSPI1B_DATA0__UART3_CTS_B                       0x01A0 0x04E8 0x0000 0x1 0x0
 #define MX6SX_PAD_QSPI1B_DATA0__ECSPI3_MOSI                       0x01A0 0x04E8 0x0738 0x2 0x1
 #define MX6SX_PAD_QSPI1B_DATA0__ESAI_RX_FS                        0x01A0 0x04E8 0x0778 0x3 0x2
 #define MX6SX_PAD_QSPI1B_DATA0__CSI1_DATA_22                      0x01A0 0x04E8 0x06F4 0x4 0x1
@@ -1236,7 +1236,7 @@
 #define MX6SX_PAD_SD1_DATA2__AUDMUX_AUD5_TXFS                     0x0230 0x0578 0x0670 0x1 0x1
 #define MX6SX_PAD_SD1_DATA2__PWM3_OUT                             0x0230 0x0578 0x0000 0x2 0x0
 #define MX6SX_PAD_SD1_DATA2__GPT_COMPARE2                         0x0230 0x0578 0x0000 0x3 0x0
-#define MX6SX_PAD_SD1_DATA2__UART2_CTS_B                          0x0230 0x0578 0x0834 0x4 0x2
+#define MX6SX_PAD_SD1_DATA2__UART2_CTS_B                          0x0230 0x0578 0x0000 0x4 0x0
 #define MX6SX_PAD_SD1_DATA2__GPIO6_IO_4                           0x0230 0x0578 0x0000 0x5 0x0
 #define MX6SX_PAD_SD1_DATA2__ECSPI4_RDY                           0x0230 0x0578 0x0000 0x6 0x0
 #define MX6SX_PAD_SD1_DATA2__CCM_OUT0                             0x0230 0x0578 0x0000 0x7 0x0
@@ -1315,7 +1315,7 @@
 #define MX6SX_PAD_SD2_DATA3__VADC_CLAMP_CURRENT_3                 0x024C 0x0594 0x0000 0x8 0x0
 #define MX6SX_PAD_SD2_DATA3__MMDC_DEBUG_31                        0x024C 0x0594 0x0000 0x9 0x0
 #define MX6SX_PAD_SD3_CLK__USDHC3_CLK                             0x0250 0x0598 0x0000 0x0 0x0
-#define MX6SX_PAD_SD3_CLK__UART4_CTS_B                            0x0250 0x0598 0x0844 0x1 0x0
+#define MX6SX_PAD_SD3_CLK__UART4_CTS_B                            0x0250 0x0598 0x0000 0x1 0x0
 #define MX6SX_PAD_SD3_CLK__ECSPI4_SCLK                            0x0250 0x0598 0x0740 0x2 0x0
 #define MX6SX_PAD_SD3_CLK__AUDMUX_AUD6_RXFS                       0x0250 0x0598 0x0680 0x3 0x0
 #define MX6SX_PAD_SD3_CLK__LCDIF2_VSYNC                           0x0250 0x0598 0x0000 0x4 0x0
@@ -1409,7 +1409,7 @@
 #define MX6SX_PAD_SD3_DATA7__USDHC3_DATA7                         0x0274 0x05BC 0x0000 0x0 0x0
 #define MX6SX_PAD_SD3_DATA7__CAN1_RX                              0x0274 0x05BC 0x068C 0x1 0x0
 #define MX6SX_PAD_SD3_DATA7__CANFD_RX1                            0x0274 0x05BC 0x0694 0x2 0x0
-#define MX6SX_PAD_SD3_DATA7__UART3_CTS_B                          0x0274 0x05BC 0x083C 0x3 0x3
+#define MX6SX_PAD_SD3_DATA7__UART3_CTS_B                          0x0274 0x05BC 0x0000 0x3 0x0
 #define MX6SX_PAD_SD3_DATA7__LCDIF2_DATA_5                        0x0274 0x05BC 0x0000 0x4 0x0
 #define MX6SX_PAD_SD3_DATA7__GPIO7_IO_9                           0x0274 0x05BC 0x0000 0x5 0x0
 #define MX6SX_PAD_SD3_DATA7__ENET1_1588_EVENT0_IN                 0x0274 0x05BC 0x0000 0x6 0x0
@@ -1510,7 +1510,7 @@
 #define MX6SX_PAD_SD4_DATA6__SDMA_DEBUG_EVENT_CHANNEL_1           0x0298 0x05E0 0x0000 0x9 0x0
 #define MX6SX_PAD_SD4_DATA7__USDHC4_DATA7                         0x029C 0x05E4 0x0000 0x0 0x0
 #define MX6SX_PAD_SD4_DATA7__RAWNAND_DATA08                       0x029C 0x05E4 0x0000 0x1 0x0
-#define MX6SX_PAD_SD4_DATA7__UART5_CTS_B                          0x029C 0x05E4 0x084C 0x2 0x1
+#define MX6SX_PAD_SD4_DATA7__UART5_CTS_B                          0x029C 0x05E4 0x0000 0x2 0x0
 #define MX6SX_PAD_SD4_DATA7__ECSPI3_SS0                           0x029C 0x05E4 0x073C 0x3 0x0
 #define MX6SX_PAD_SD4_DATA7__LCDIF2_DATA_15                       0x029C 0x05E4 0x0000 0x4 0x0
 #define MX6SX_PAD_SD4_DATA7__GPIO6_IO_21                          0x029C 0x05E4 0x0000 0x5 0x0
diff --git a/arch/arm/boot/dts/vf610-twr.dts b/arch/arm/boot/dts/vf610-twr.dts
index 11d733406c7e..b8a5e8c68f06 100644
--- a/arch/arm/boot/dts/vf610-twr.dts
+++ b/arch/arm/boot/dts/vf610-twr.dts
@@ -168,7 +168,7 @@
 		};
 
 		pinctrl_esdhc1: esdhc1grp {
-			fsl,fsl,pins = <
+			fsl,pins = <
 				VF610_PAD_PTA24__ESDHC1_CLK	0x31ef
 				VF610_PAD_PTA25__ESDHC1_CMD	0x31ef
 				VF610_PAD_PTA26__ESDHC1_DAT0	0x31ef
diff --git a/arch/arm/mach-imx/Kconfig b/arch/arm/mach-imx/Kconfig
index 9de84a215abd..be9a51afe05a 100644
--- a/arch/arm/mach-imx/Kconfig
+++ b/arch/arm/mach-imx/Kconfig
@@ -85,7 +85,6 @@ config SOC_IMX25
 
 config SOC_IMX27
 	bool
-	select ARCH_HAS_OPP
 	select CPU_ARM926T
 	select IMX_HAVE_IOMUX_V1
 	select MXC_AVIC
@@ -659,7 +658,6 @@ comment "Device tree only"
 
 config SOC_IMX5
 	bool
-	select ARCH_HAS_OPP
 	select HAVE_IMX_SRC
 	select MXC_TZIC
 
diff --git a/arch/arm/mach-imx/Makefile b/arch/arm/mach-imx/Makefile
index ac88599ca080..23c02932bf84 100644
--- a/arch/arm/mach-imx/Makefile
+++ b/arch/arm/mach-imx/Makefile
@@ -93,9 +93,11 @@ obj-$(CONFIG_HAVE_IMX_ANATOP) += anatop.o
 obj-$(CONFIG_HAVE_IMX_GPC) += gpc.o
 obj-$(CONFIG_HAVE_IMX_MMDC) += mmdc.o
 obj-$(CONFIG_HAVE_IMX_SRC) += src.o
+ifdef CONFIG_SOC_IMX6
 AFLAGS_headsmp.o :=-Wa,-march=armv7-a
 obj-$(CONFIG_SMP) += headsmp.o platsmp.o
 obj-$(CONFIG_HOTPLUG_CPU) += hotplug.o
+endif
 obj-$(CONFIG_SOC_IMX6Q) += clk-imx6q.o mach-imx6q.o
 obj-$(CONFIG_SOC_IMX6SL) += clk-imx6sl.o mach-imx6sl.o
 obj-$(CONFIG_SOC_IMX6SX) += clk-imx6sx.o mach-imx6sx.o
diff --git a/arch/arm/mach-imx/clk-imx6q.c b/arch/arm/mach-imx/clk-imx6q.c
index 6cceb7765c14..29d412975aff 100644
--- a/arch/arm/mach-imx/clk-imx6q.c
+++ b/arch/arm/mach-imx/clk-imx6q.c
@@ -194,6 +194,10 @@ static void __init imx6q_clocks_init(struct device_node *ccm_node)
 	clk[IMX6QDL_CLK_PLL3_80M]  = imx_clk_fixed_factor("pll3_80m",  "pll3_usb_otg",   1, 6);
 	clk[IMX6QDL_CLK_PLL3_60M]  = imx_clk_fixed_factor("pll3_60m",  "pll3_usb_otg",   1, 8);
 	clk[IMX6QDL_CLK_TWD]       = imx_clk_fixed_factor("twd",       "arm",            1, 2);
+	if (cpu_is_imx6dl()) {
+		clk[IMX6QDL_CLK_GPU2D_AXI] = imx_clk_fixed_factor("gpu2d_axi", "mmdc_ch0_axi_podf", 1, 1);
+		clk[IMX6QDL_CLK_GPU3D_AXI] = imx_clk_fixed_factor("gpu3d_axi", "mmdc_ch0_axi_podf", 1, 1);
+	}
 
 	clk[IMX6QDL_CLK_PLL4_POST_DIV] = clk_register_divider_table(NULL, "pll4_post_div", "pll4_audio", CLK_SET_RATE_PARENT, base + 0x70, 19, 2, 0, post_div_table, &imx_ccm_lock);
 	clk[IMX6QDL_CLK_PLL4_AUDIO_DIV] = clk_register_divider(NULL, "pll4_audio_div", "pll4_post_div", CLK_SET_RATE_PARENT, base + 0x170, 15, 1, 0, &imx_ccm_lock);
@@ -217,8 +221,10 @@ static void __init imx6q_clocks_init(struct device_node *ccm_node)
 	clk[IMX6QDL_CLK_ESAI_SEL]         = imx_clk_mux("esai_sel",         base + 0x20, 19, 2, audio_sels,        ARRAY_SIZE(audio_sels));
 	clk[IMX6QDL_CLK_ASRC_SEL]         = imx_clk_mux("asrc_sel",         base + 0x30, 7,  2, audio_sels,        ARRAY_SIZE(audio_sels));
 	clk[IMX6QDL_CLK_SPDIF_SEL]        = imx_clk_mux("spdif_sel",        base + 0x30, 20, 2, audio_sels,        ARRAY_SIZE(audio_sels));
-	clk[IMX6QDL_CLK_GPU2D_AXI]        = imx_clk_mux("gpu2d_axi",        base + 0x18, 0,  1, gpu_axi_sels,      ARRAY_SIZE(gpu_axi_sels));
-	clk[IMX6QDL_CLK_GPU3D_AXI]        = imx_clk_mux("gpu3d_axi",        base + 0x18, 1,  1, gpu_axi_sels,      ARRAY_SIZE(gpu_axi_sels));
+	if (cpu_is_imx6q()) {
+		clk[IMX6QDL_CLK_GPU2D_AXI]        = imx_clk_mux("gpu2d_axi",        base + 0x18, 0,  1, gpu_axi_sels,      ARRAY_SIZE(gpu_axi_sels));
+		clk[IMX6QDL_CLK_GPU3D_AXI]        = imx_clk_mux("gpu3d_axi",        base + 0x18, 1,  1, gpu_axi_sels,      ARRAY_SIZE(gpu_axi_sels));
+	}
 	clk[IMX6QDL_CLK_GPU2D_CORE_SEL]   = imx_clk_mux("gpu2d_core_sel",   base + 0x18, 16, 2, gpu2d_core_sels,   ARRAY_SIZE(gpu2d_core_sels));
 	clk[IMX6QDL_CLK_GPU3D_CORE_SEL]   = imx_clk_mux("gpu3d_core_sel",   base + 0x18, 4,  2, gpu3d_core_sels,   ARRAY_SIZE(gpu3d_core_sels));
 	clk[IMX6QDL_CLK_GPU3D_SHADER_SEL] = imx_clk_mux("gpu3d_shader_sel", base + 0x18, 8,  2, gpu3d_shader_sels, ARRAY_SIZE(gpu3d_shader_sels));
diff --git a/arch/arm/mach-imx/suspend-imx6.S b/arch/arm/mach-imx/suspend-imx6.S
index 74b50f1982db..ca4ea2daf25b 100644
--- a/arch/arm/mach-imx/suspend-imx6.S
+++ b/arch/arm/mach-imx/suspend-imx6.S
@@ -173,6 +173,8 @@ ENTRY(imx6_suspend)
 	ldr	r6, [r11, #0x0]
 	ldr	r11, [r0, #PM_INFO_MX6Q_GPC_V_OFFSET]
 	ldr	r6, [r11, #0x0]
+	ldr	r11, [r0, #PM_INFO_MX6Q_IOMUXC_V_OFFSET]
+	ldr	r6, [r11, #0x0]
 
 	/* use r11 to store the IO address */
 	ldr	r11, [r0, #PM_INFO_MX6Q_SRC_V_OFFSET]