Merge tag 'gpio-omap-descriptors-v6.5' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio into soc/arm

This removes all usage of global GPIO numbers from
arch/arm/mach-omap[12].

The patches have been reviewed and tested by everyone
who showed interest which was one person that tested
on OSK1 and Nokia 770, and we smoked out the bugs and
also addressed all review comments.

Any remaining problems can certainly be fixed in-tree.

* tag 'gpio-omap-descriptors-v6.5' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio:
  ARM/musb: omap2: Remove global GPIO numbers from TUSB6010
  ARM: omap2: Rewrite WLAN quirk to use GPIO descriptors
  ARM: omap2: Get USB hub reset GPIO from descriptor
  ARM/gpio: Push OMAP2 quirk down into TWL4030 driver
  ARM: omap1: Exorcise the legacy GPIO header
  ARM: omap1: Make serial wakeup GPIOs use descriptors
  ARM: omap1: Fix up the Nokia 770 board device IRQs
  ARM/mmc: Convert old mmci-omap to GPIO descriptors
  Input: ads7846 - Convert to use software nodes
  ARM: omap1: Remove reliance on GPIO numbers from SX1
  ARM: omap1: Remove reliance on GPIO numbers from PalmTE
  ARM: omap1: Drop header on AMS Delta
  ARM/mfd/gpio: Fixup TPS65010 regression on OMAP1 OSK1

Signed-off-by: Arnd Bergmann <arnd@arndb.de>

32 files changed, 636 insertions, 511 deletions

diff --git a/arch/arm/mach-omap1/board-ams-delta.c b/arch/arm/mach-omap1/board-ams-delta.c
index 9108c871d129..ac47ab9fe096 100644
--- a/arch/arm/mach-omap1/board-ams-delta.c
+++ b/arch/arm/mach-omap1/board-ams-delta.c
@@ -11,7 +11,6 @@
 #include <linux/gpio/driver.h>
 #include <linux/gpio/machine.h>
 #include <linux/gpio/consumer.h>
-#include <linux/gpio.h>
 #include <linux/kernel.h>
 #include <linux/init.h>
 #include <linux/input.h>
diff --git a/arch/arm/mach-omap1/board-nokia770.c b/arch/arm/mach-omap1/board-nokia770.c
index a501a473ffd6..5ea27ca26abf 100644
--- a/arch/arm/mach-omap1/board-nokia770.c
+++ b/arch/arm/mach-omap1/board-nokia770.c
@@ -6,17 +6,18 @@
  */
 #include <linux/clkdev.h>
 #include <linux/irq.h>
-#include <linux/gpio.h>
+#include <linux/gpio/consumer.h>
 #include <linux/gpio/machine.h>
+#include <linux/gpio/property.h>
 #include <linux/kernel.h>
 #include <linux/init.h>
 #include <linux/mutex.h>
 #include <linux/platform_device.h>
+#include <linux/property.h>
 #include <linux/input.h>
 #include <linux/omapfb.h>
 
 #include <linux/spi/spi.h>
-#include <linux/spi/ads7846.h>
 #include <linux/workqueue.h>
 #include <linux/delay.h>
 
@@ -35,6 +36,25 @@
 #include "clock.h"
 #include "mmc.h"
 
+static const struct software_node nokia770_mpuio_gpiochip_node = {
+	.name = "mpuio",
+};
+
+static const struct software_node nokia770_gpiochip1_node = {
+	.name = "gpio-0-15",
+};
+
+static const struct software_node nokia770_gpiochip2_node = {
+	.name = "gpio-16-31",
+};
+
+static const struct software_node *nokia770_gpiochip_nodes[] = {
+	&nokia770_mpuio_gpiochip_node,
+	&nokia770_gpiochip1_node,
+	&nokia770_gpiochip2_node,
+	NULL
+};
+
 #define ADS7846_PENDOWN_GPIO	15
 
 static const unsigned int nokia770_keymap[] = {
@@ -85,40 +105,47 @@ static struct platform_device *nokia770_devices[] __initdata = {
 	&nokia770_kp_device,
 };
 
-static void mipid_shutdown(struct mipid_platform_data *pdata)
-{
-	if (pdata->nreset_gpio != -1) {
-		printk(KERN_INFO "shutdown LCD\n");
-		gpio_set_value(pdata->nreset_gpio, 0);
-		msleep(120);
-	}
-}
-
-static struct mipid_platform_data nokia770_mipid_platform_data = {
-	.shutdown = mipid_shutdown,
-};
+static struct mipid_platform_data nokia770_mipid_platform_data = { };
 
 static const struct omap_lcd_config nokia770_lcd_config __initconst = {
 	.ctrl_name	= "hwa742",
 };
 
+static const struct property_entry nokia770_mipid_props[] = {
+	PROPERTY_ENTRY_GPIO("reset-gpios", &nokia770_gpiochip1_node,
+			    13, GPIO_ACTIVE_LOW),
+	{ }
+};
+
+static const struct software_node nokia770_mipid_swnode = {
+	.name = "lcd_mipid",
+	.properties = nokia770_mipid_props,
+};
+
 static void __init mipid_dev_init(void)
 {
-	nokia770_mipid_platform_data.nreset_gpio = 13;
 	nokia770_mipid_platform_data.data_lines = 16;
 
 	omapfb_set_lcd_config(&nokia770_lcd_config);
 }
 
-static struct ads7846_platform_data nokia770_ads7846_platform_data __initdata = {
-	.x_max		= 0x0fff,
-	.y_max		= 0x0fff,
-	.x_plate_ohms	= 180,
-	.pressure_max	= 255,
-	.debounce_max	= 10,
-	.debounce_tol	= 3,
-	.debounce_rep	= 1,
-	.gpio_pendown	= ADS7846_PENDOWN_GPIO,
+static const struct property_entry nokia770_ads7846_props[] = {
+	PROPERTY_ENTRY_STRING("compatible", "ti,ads7846"),
+	PROPERTY_ENTRY_U32("touchscreen-size-x", 4096),
+	PROPERTY_ENTRY_U32("touchscreen-size-y", 4096),
+	PROPERTY_ENTRY_U32("touchscreen-max-pressure", 256),
+	PROPERTY_ENTRY_U32("touchscreen-average-samples", 10),
+	PROPERTY_ENTRY_U16("ti,x-plate-ohms", 180),
+	PROPERTY_ENTRY_U16("ti,debounce-tol", 3),
+	PROPERTY_ENTRY_U16("ti,debounce-rep", 1),
+	PROPERTY_ENTRY_GPIO("pendown-gpios", &nokia770_gpiochip1_node,
+			    ADS7846_PENDOWN_GPIO, GPIO_ACTIVE_LOW),
+	{ }
+};
+
+static const struct software_node nokia770_ads7846_swnode = {
+	.name = "ads7846",
+	.properties = nokia770_ads7846_props,
 };
 
 static struct spi_board_info nokia770_spi_board_info[] __initdata = {
@@ -128,13 +155,14 @@ static struct spi_board_info nokia770_spi_board_info[] __initdata = {
 		.chip_select    = 3,
 		.max_speed_hz   = 12000000,
 		.platform_data	= &nokia770_mipid_platform_data,
+		.swnode         = &nokia770_mipid_swnode,
 	},
 	[1] = {
 		.modalias       = "ads7846",
 		.bus_num        = 2,
 		.chip_select    = 0,
 		.max_speed_hz   = 2500000,
-		.platform_data	= &nokia770_ads7846_platform_data,
+		.swnode         = &nokia770_ads7846_swnode,
 	},
 };
 
@@ -156,27 +184,23 @@ static struct omap_usb_config nokia770_usb_config __initdata = {
 
 #if IS_ENABLED(CONFIG_MMC_OMAP)
 
-#define NOKIA770_GPIO_MMC_POWER		41
-#define NOKIA770_GPIO_MMC_SWITCH	23
-
-static int nokia770_mmc_set_power(struct device *dev, int slot, int power_on,
-				int vdd)
-{
-	gpio_set_value(NOKIA770_GPIO_MMC_POWER, power_on);
-	return 0;
-}
-
-static int nokia770_mmc_get_cover_state(struct device *dev, int slot)
-{
-	return gpio_get_value(NOKIA770_GPIO_MMC_SWITCH);
-}
+static struct gpiod_lookup_table nokia770_mmc_gpio_table = {
+	.dev_id = "mmci-omap.1",
+	.table = {
+		/* Slot index 0, VSD power, GPIO 41 */
+		GPIO_LOOKUP_IDX("gpio-32-47", 9,
+				"vsd", 0, GPIO_ACTIVE_HIGH),
+		/* Slot index 0, switch, GPIO 23 */
+		GPIO_LOOKUP_IDX("gpio-16-31", 7,
+				"cover", 0, GPIO_ACTIVE_HIGH),
+		{ }
+	},
+};
 
 static struct omap_mmc_platform_data nokia770_mmc2_data = {
 	.nr_slots                       = 1,
 	.max_freq                       = 12000000,
 	.slots[0]       = {
-		.set_power		= nokia770_mmc_set_power,
-		.get_cover_state	= nokia770_mmc_get_cover_state,
 		.ocr_mask               = MMC_VDD_32_33|MMC_VDD_33_34,
 		.name                   = "mmcblk",
 	},
@@ -186,20 +210,7 @@ static struct omap_mmc_platform_data *nokia770_mmc_data[OMAP16XX_NR_MMC];
 
 static void __init nokia770_mmc_init(void)
 {
-	int ret;
-
-	ret = gpio_request(NOKIA770_GPIO_MMC_POWER, "MMC power");
-	if (ret < 0)
-		return;
-	gpio_direction_output(NOKIA770_GPIO_MMC_POWER, 0);
-
-	ret = gpio_request(NOKIA770_GPIO_MMC_SWITCH, "MMC cover");
-	if (ret < 0) {
-		gpio_free(NOKIA770_GPIO_MMC_POWER);
-		return;
-	}
-	gpio_direction_input(NOKIA770_GPIO_MMC_SWITCH);
-
+	gpiod_add_lookup_table(&nokia770_mmc_gpio_table);
 	/* Only the second MMC controller is used */
 	nokia770_mmc_data[1] = &nokia770_mmc2_data;
 	omap1_init_mmc(nokia770_mmc_data, OMAP16XX_NR_MMC);
@@ -212,14 +223,16 @@ static inline void nokia770_mmc_init(void)
 #endif
 
 #if IS_ENABLED(CONFIG_I2C_CBUS_GPIO)
-static struct gpiod_lookup_table nokia770_cbus_gpio_table = {
-	.dev_id = "i2c-cbus-gpio.2",
-	.table = {
-		GPIO_LOOKUP_IDX("mpuio", 9, NULL, 0, 0), /* clk */
-		GPIO_LOOKUP_IDX("mpuio", 10, NULL, 1, 0), /* dat */
-		GPIO_LOOKUP_IDX("mpuio", 11, NULL, 2, 0), /* sel */
-		{ },
-	},
+
+static const struct software_node_ref_args nokia770_cbus_gpio_refs[] = {
+	SOFTWARE_NODE_REFERENCE(&nokia770_mpuio_gpiochip_node, 9, 0),
+	SOFTWARE_NODE_REFERENCE(&nokia770_mpuio_gpiochip_node, 10, 0),
+	SOFTWARE_NODE_REFERENCE(&nokia770_mpuio_gpiochip_node, 11, 0),
+};
+
+static const struct property_entry nokia770_cbus_props[] = {
+	PROPERTY_ENTRY_REF_ARRAY("gpios", nokia770_cbus_gpio_refs),
+	{ }
 };
 
 static struct platform_device nokia770_cbus_device = {
@@ -238,22 +251,29 @@ static struct i2c_board_info nokia770_i2c_board_info_2[] __initdata = {
 
 static void __init nokia770_cbus_init(void)
 {
-	const int retu_irq_gpio = 62;
-	const int tahvo_irq_gpio = 40;
-
-	if (gpio_request_one(retu_irq_gpio, GPIOF_IN, "Retu IRQ"))
-		return;
-	if (gpio_request_one(tahvo_irq_gpio, GPIOF_IN, "Tahvo IRQ")) {
-		gpio_free(retu_irq_gpio);
-		return;
+	struct gpio_desc *d;
+	int irq;
+
+	d = gpiod_get(NULL, "retu_irq", GPIOD_IN);
+	if (IS_ERR(d)) {
+		pr_err("Unable to get CBUS Retu IRQ GPIO descriptor\n");
+	} else {
+		irq = gpiod_to_irq(d);
+		irq_set_irq_type(irq, IRQ_TYPE_EDGE_RISING);
+		nokia770_i2c_board_info_2[0].irq = irq;
+	}
+	d = gpiod_get(NULL, "tahvo_irq", GPIOD_IN);
+	if (IS_ERR(d)) {
+		pr_err("Unable to get CBUS Tahvo IRQ GPIO descriptor\n");
+	} else {
+		irq = gpiod_to_irq(d);
+		irq_set_irq_type(irq, IRQ_TYPE_EDGE_RISING);
+		nokia770_i2c_board_info_2[1].irq = irq;
 	}
-	irq_set_irq_type(gpio_to_irq(retu_irq_gpio), IRQ_TYPE_EDGE_RISING);
-	irq_set_irq_type(gpio_to_irq(tahvo_irq_gpio), IRQ_TYPE_EDGE_RISING);
-	nokia770_i2c_board_info_2[0].irq = gpio_to_irq(retu_irq_gpio);
-	nokia770_i2c_board_info_2[1].irq = gpio_to_irq(tahvo_irq_gpio);
 	i2c_register_board_info(2, nokia770_i2c_board_info_2,
 				ARRAY_SIZE(nokia770_i2c_board_info_2));
-	gpiod_add_lookup_table(&nokia770_cbus_gpio_table);
+	device_create_managed_software_node(&nokia770_cbus_device.dev,
+					    nokia770_cbus_props, NULL);
 	platform_device_register(&nokia770_cbus_device);
 }
 #else /* CONFIG_I2C_CBUS_GPIO */
@@ -262,8 +282,33 @@ static void __init nokia770_cbus_init(void)
 }
 #endif /* CONFIG_I2C_CBUS_GPIO */
 
+static struct gpiod_lookup_table nokia770_irq_gpio_table = {
+	.dev_id = NULL,
+	.table = {
+		/* GPIO used by SPI device 1 */
+		GPIO_LOOKUP("gpio-0-15", 15, "ads7846_irq",
+			    GPIO_ACTIVE_HIGH),
+		/* GPIO used for retu IRQ */
+		GPIO_LOOKUP("gpio-48-63", 15, "retu_irq",
+			    GPIO_ACTIVE_HIGH),
+		/* GPIO used for tahvo IRQ */
+		GPIO_LOOKUP("gpio-32-47", 8, "tahvo_irq",
+			    GPIO_ACTIVE_HIGH),
+		/* GPIOs used by serial wakeup IRQs */
+		GPIO_LOOKUP_IDX("gpio-32-47", 5, "wakeup", 0,
+			    GPIO_ACTIVE_HIGH),
+		GPIO_LOOKUP_IDX("gpio-16-31", 2, "wakeup", 1,
+			    GPIO_ACTIVE_HIGH),
+		GPIO_LOOKUP_IDX("gpio-48-63", 1, "wakeup", 2,
+			    GPIO_ACTIVE_HIGH),
+		{ }
+	},
+};
+
 static void __init omap_nokia770_init(void)
 {
+	struct gpio_desc *d;
+
 	/* On Nokia 770, the SleepX signal is masked with an
 	 * MPUIO line by default.  It has to be unmasked for it
 	 * to become functional */
@@ -273,8 +318,16 @@ static void __init omap_nokia770_init(void)
 	/* Unmask SleepX signal */
 	omap_writew((omap_readw(0xfffb5004) & ~2), 0xfffb5004);
 
+	software_node_register_node_group(nokia770_gpiochip_nodes);
 	platform_add_devices(nokia770_devices, ARRAY_SIZE(nokia770_devices));
-	nokia770_spi_board_info[1].irq = gpio_to_irq(15);
+
+	gpiod_add_lookup_table(&nokia770_irq_gpio_table);
+	d = gpiod_get(NULL, "ads7846_irq", GPIOD_IN);
+	if (IS_ERR(d))
+		pr_err("Unable to get ADS7846 IRQ GPIO descriptor\n");
+	else
+		nokia770_spi_board_info[1].irq = gpiod_to_irq(d);
+
 	spi_register_board_info(nokia770_spi_board_info,
 				ARRAY_SIZE(nokia770_spi_board_info));
 	omap_serial_init();
diff --git a/arch/arm/mach-omap1/board-osk.c b/arch/arm/mach-omap1/board-osk.c
index df758c1f9237..463687b9ca52 100644
--- a/arch/arm/mach-omap1/board-osk.c
+++ b/arch/arm/mach-omap1/board-osk.c
@@ -25,7 +25,8 @@
  * with this program; if not, write  to the Free Software Foundation, Inc.,
  * 675 Mass Ave, Cambridge, MA 02139, USA.
  */
-#include <linux/gpio.h>
+#include <linux/gpio/consumer.h>
+#include <linux/gpio/driver.h>
 #include <linux/gpio/machine.h>
 #include <linux/kernel.h>
 #include <linux/init.h>
@@ -64,13 +65,12 @@
 /* TPS65010 has four GPIOs.  nPG and LED2 can be treated like GPIOs with
  * alternate pin configurations for hardware-controlled blinking.
  */
-#define OSK_TPS_GPIO_BASE		(OMAP_MAX_GPIO_LINES + 16 /* MPUIO */)
-#	define OSK_TPS_GPIO_USB_PWR_EN	(OSK_TPS_GPIO_BASE + 0)
-#	define OSK_TPS_GPIO_LED_D3	(OSK_TPS_GPIO_BASE + 1)
-#	define OSK_TPS_GPIO_LAN_RESET	(OSK_TPS_GPIO_BASE + 2)
-#	define OSK_TPS_GPIO_DSP_PWR_EN	(OSK_TPS_GPIO_BASE + 3)
-#	define OSK_TPS_GPIO_LED_D9	(OSK_TPS_GPIO_BASE + 4)
-#	define OSK_TPS_GPIO_LED_D2	(OSK_TPS_GPIO_BASE + 5)
+#define OSK_TPS_GPIO_USB_PWR_EN	0
+#define OSK_TPS_GPIO_LED_D3	1
+#define OSK_TPS_GPIO_LAN_RESET	2
+#define OSK_TPS_GPIO_DSP_PWR_EN	3
+#define OSK_TPS_GPIO_LED_D9	4
+#define OSK_TPS_GPIO_LED_D2	5
 
 static struct mtd_partition osk_partitions[] = {
 	/* bootloader (U-Boot, etc) in first sector */
@@ -174,11 +174,20 @@ static const struct gpio_led tps_leds[] = {
 	/* NOTE:  D9 and D2 have hardware blink support.
 	 * Also, D9 requires non-battery power.
 	 */
-	{ .gpio = OSK_TPS_GPIO_LED_D9, .name = "d9",
-			.default_trigger = "disk-activity", },
-	{ .gpio = OSK_TPS_GPIO_LED_D2, .name = "d2", },
-	{ .gpio = OSK_TPS_GPIO_LED_D3, .name = "d3", .active_low = 1,
-			.default_trigger = "heartbeat", },
+	{ .name = "d9", .default_trigger = "disk-activity", },
+	{ .name = "d2", },
+	{ .name = "d3", .default_trigger = "heartbeat", },
+};
+
+static struct gpiod_lookup_table tps_leds_gpio_table = {
+	.dev_id = "leds-gpio",
+	.table = {
+		/* Use local offsets on TPS65010 */
+		GPIO_LOOKUP_IDX("tps65010", OSK_TPS_GPIO_LED_D9, NULL, 0, GPIO_ACTIVE_HIGH),
+		GPIO_LOOKUP_IDX("tps65010", OSK_TPS_GPIO_LED_D2, NULL, 1, GPIO_ACTIVE_HIGH),
+		GPIO_LOOKUP_IDX("tps65010", OSK_TPS_GPIO_LED_D3, NULL, 2, GPIO_ACTIVE_LOW),
+		{ }
+	},
 };
 
 static struct gpio_led_platform_data tps_leds_data = {
@@ -192,29 +201,34 @@ static struct platform_device osk5912_tps_leds = {
 	.dev.platform_data	= &tps_leds_data,
 };
 
-static int osk_tps_setup(struct i2c_client *client, void *context)
+/* The board just hold these GPIOs hogged from setup to teardown */
+static struct gpio_desc *eth_reset;
+static struct gpio_desc *vdd_dsp;
+
+static int osk_tps_setup(struct i2c_client *client, struct gpio_chip *gc)
 {
+	struct gpio_desc *d;
 	if (!IS_BUILTIN(CONFIG_TPS65010))
 		return -ENOSYS;
 
 	/* Set GPIO 1 HIGH to disable VBUS power supply;
 	 * OHCI driver powers it up/down as needed.
 	 */
-	gpio_request(OSK_TPS_GPIO_USB_PWR_EN, "n_vbus_en");
-	gpio_direction_output(OSK_TPS_GPIO_USB_PWR_EN, 1);
+	d = gpiochip_request_own_desc(gc, OSK_TPS_GPIO_USB_PWR_EN, "n_vbus_en",
+				      GPIO_ACTIVE_HIGH, GPIOD_OUT_HIGH);
 	/* Free the GPIO again as the driver will request it */
-	gpio_free(OSK_TPS_GPIO_USB_PWR_EN);
+	gpiochip_free_own_desc(d);
 
 	/* Set GPIO 2 high so LED D3 is off by default */
 	tps65010_set_gpio_out_value(GPIO2, HIGH);
 
 	/* Set GPIO 3 low to take ethernet out of reset */
-	gpio_request(OSK_TPS_GPIO_LAN_RESET, "smc_reset");
-	gpio_direction_output(OSK_TPS_GPIO_LAN_RESET, 0);
+	eth_reset = gpiochip_request_own_desc(gc, OSK_TPS_GPIO_LAN_RESET, "smc_reset",
+					      GPIO_ACTIVE_HIGH, GPIOD_OUT_LOW);
 
 	/* GPIO4 is VDD_DSP */
-	gpio_request(OSK_TPS_GPIO_DSP_PWR_EN, "dsp_power");
-	gpio_direction_output(OSK_TPS_GPIO_DSP_PWR_EN, 1);
+	vdd_dsp = gpiochip_request_own_desc(gc, OSK_TPS_GPIO_DSP_PWR_EN, "dsp_power",
+					    GPIO_ACTIVE_HIGH, GPIOD_OUT_HIGH);
 	/* REVISIT if DSP support isn't configured, power it off ... */
 
 	/* Let LED1 (D9) blink; leds-gpio may override it */
@@ -232,15 +246,22 @@ static int osk_tps_setup(struct i2c_client *client, void *context)
 
 	/* register these three LEDs */
 	osk5912_tps_leds.dev.parent = &client->dev;
+	gpiod_add_lookup_table(&tps_leds_gpio_table);
 	platform_device_register(&osk5912_tps_leds);
 
 	return 0;
 }
 
+static void osk_tps_teardown(struct i2c_client *client, struct gpio_chip *gc)
+{
+	gpiochip_free_own_desc(eth_reset);
+	gpiochip_free_own_desc(vdd_dsp);
+}
+
 static struct tps65010_board tps_board = {
-	.base		= OSK_TPS_GPIO_BASE,
 	.outmask	= 0x0f,
 	.setup		= osk_tps_setup,
+	.teardown	= osk_tps_teardown,
 };
 
 static struct i2c_board_info __initdata osk_i2c_board_info[] = {
@@ -263,11 +284,6 @@ static void __init osk_init_smc91x(void)
 {
 	u32 l;
 
-	if ((gpio_request(0, "smc_irq")) < 0) {
-		printk("Error requesting gpio 0 for smc91x irq\n");
-		return;
-	}
-
 	/* Check EMIFS wait states to fix errors with SMC_GET_PKT_HDR */
 	l = omap_readl(EMIFS_CCS(1));
 	l |= 0x3;
@@ -279,10 +295,6 @@ static void __init osk_init_cf(int seg)
 	struct resource *res = &osk5912_cf_resources[1];
 
 	omap_cfg_reg(M7_1610_GPIO62);
-	if ((gpio_request(62, "cf_irq")) < 0) {
-		printk("Error requesting gpio 62 for CF irq\n");
-		return;
-	}
 
 	switch (seg) {
 	/* NOTE: CS0 could be configured too ... */
@@ -308,18 +320,17 @@ static void __init osk_init_cf(int seg)
 		seg, omap_readl(EMIFS_CCS(seg)), omap_readl(EMIFS_ACS(seg)));
 	omap_writel(0x0004a1b3, EMIFS_CCS(seg));	/* synch mode 4 etc */
 	omap_writel(0x00000000, EMIFS_ACS(seg));	/* OE hold/setup */
-
-	/* the CF I/O IRQ is really active-low */
-	irq_set_irq_type(gpio_to_irq(62), IRQ_TYPE_EDGE_FALLING);
 }
 
 static struct gpiod_lookup_table osk_usb_gpio_table = {
 	.dev_id = "ohci",
 	.table = {
 		/* Power GPIO on the I2C-attached TPS65010 */
-		GPIO_LOOKUP("tps65010", 0, "power", GPIO_ACTIVE_HIGH),
+		GPIO_LOOKUP("tps65010", OSK_TPS_GPIO_USB_PWR_EN, "power",
+			    GPIO_ACTIVE_HIGH),
 		GPIO_LOOKUP(OMAP_GPIO_LABEL, 9, "overcurrent",
 			    GPIO_ACTIVE_HIGH),
+		{ }
 	},
 };
 
@@ -341,8 +352,32 @@ static struct omap_usb_config osk_usb_config __initdata = {
 
 #define EMIFS_CS3_VAL	(0x88013141)
 
+static struct gpiod_lookup_table osk_irq_gpio_table = {
+	.dev_id = NULL,
+	.table = {
+		/* GPIO used for SMC91x IRQ */
+		GPIO_LOOKUP(OMAP_GPIO_LABEL, 0, "smc_irq",
+			    GPIO_ACTIVE_HIGH),
+		/* GPIO used for CF IRQ */
+		GPIO_LOOKUP("gpio-48-63", 14, "cf_irq",
+			    GPIO_ACTIVE_HIGH),
+		/* GPIO used by the TPS65010 chip */
+		GPIO_LOOKUP("mpuio", 1, "tps65010",
+			    GPIO_ACTIVE_HIGH),
+		/* GPIOs used for serial wakeup IRQs */
+		GPIO_LOOKUP_IDX("gpio-32-47", 5, "wakeup", 0,
+			    GPIO_ACTIVE_HIGH),
+		GPIO_LOOKUP_IDX("gpio-16-31", 2, "wakeup", 1,
+			    GPIO_ACTIVE_HIGH),
+		GPIO_LOOKUP_IDX("gpio-48-63", 1, "wakeup", 2,
+			    GPIO_ACTIVE_HIGH),
+		{ }
+	},
+};
+
 static void __init osk_init(void)
 {
+	struct gpio_desc *d;
 	u32 l;
 
 	osk_init_smc91x();
@@ -359,10 +394,31 @@ static void __init osk_init(void)
 
 	osk_flash_resource.end = osk_flash_resource.start = omap_cs3_phys();
 	osk_flash_resource.end += SZ_32M - 1;
-	osk5912_smc91x_resources[1].start = gpio_to_irq(0);
-	osk5912_smc91x_resources[1].end = gpio_to_irq(0);
-	osk5912_cf_resources[0].start = gpio_to_irq(62);
-	osk5912_cf_resources[0].end = gpio_to_irq(62);
+
+	/*
+	 * Add the GPIOs to be used as IRQs and immediately look them up
+	 * to be passed as an IRQ resource. This is ugly but should work
+	 * until the day we convert to device tree.
+	 */
+	gpiod_add_lookup_table(&osk_irq_gpio_table);
+
+	d = gpiod_get(NULL, "smc_irq", GPIOD_IN);
+	if (IS_ERR(d)) {
+		pr_err("Unable to get SMC IRQ GPIO descriptor\n");
+	} else {
+		irq_set_irq_type(gpiod_to_irq(d), IRQ_TYPE_EDGE_RISING);
+		osk5912_smc91x_resources[1] = DEFINE_RES_IRQ(gpiod_to_irq(d));
+	}
+
+	d = gpiod_get(NULL, "cf_irq", GPIOD_IN);
+	if (IS_ERR(d)) {
+		pr_err("Unable to get CF IRQ GPIO descriptor\n");
+	} else {
+		/* the CF I/O IRQ is really active-low */
+		irq_set_irq_type(gpiod_to_irq(d), IRQ_TYPE_EDGE_FALLING);
+		osk5912_cf_resources[0] = DEFINE_RES_IRQ(gpiod_to_irq(d));
+	}
+
 	platform_add_devices(osk5912_devices, ARRAY_SIZE(osk5912_devices));
 
 	l = omap_readl(USB_TRANSCEIVER_CTRL);
@@ -372,13 +428,15 @@ static void __init osk_init(void)
 	gpiod_add_lookup_table(&osk_usb_gpio_table);
 	omap1_usb_init(&osk_usb_config);
 
+	omap_serial_init();
+
 	/* irq for tps65010 chip */
 	/* bootloader effectively does:  omap_cfg_reg(U19_1610_MPUIO1); */
-	if (gpio_request(OMAP_MPUIO(1), "tps65010") == 0)
-		gpio_direction_input(OMAP_MPUIO(1));
-
-	omap_serial_init();
-	osk_i2c_board_info[0].irq = gpio_to_irq(OMAP_MPUIO(1));
+	d = gpiod_get(NULL, "tps65010", GPIOD_IN);
+	if (IS_ERR(d))
+		pr_err("Unable to get TPS65010 IRQ GPIO descriptor\n");
+	else
+		osk_i2c_board_info[0].irq = gpiod_to_irq(d);
 	omap_register_i2c_bus(1, 400, osk_i2c_board_info,
 			      ARRAY_SIZE(osk_i2c_board_info));
 }
diff --git a/arch/arm/mach-omap1/board-palmte.c b/arch/arm/mach-omap1/board-palmte.c
index f79c497f04d5..49b7757cb2fd 100644
--- a/arch/arm/mach-omap1/board-palmte.c
+++ b/arch/arm/mach-omap1/board-palmte.c
@@ -13,7 +13,8 @@
  *
  * Copyright (c) 2006 Andrzej Zaborowski  <balrog@zabor.org>
  */
-#include <linux/gpio.h>
+#include <linux/gpio/machine.h>
+#include <linux/gpio/consumer.h>
 #include <linux/kernel.h>
 #include <linux/init.h>
 #include <linux/input.h>
@@ -187,23 +188,6 @@ static struct spi_board_info palmte_spi_info[] __initdata = {
 	},
 };
 
-static void __init palmte_misc_gpio_setup(void)
-{
-	/* Set TSC2102 PINTDAV pin as input (used by TSC2102 driver) */
-	if (gpio_request(PALMTE_PINTDAV_GPIO, "TSC2102 PINTDAV") < 0) {
-		printk(KERN_ERR "Could not reserve PINTDAV GPIO!\n");
-		return;
-	}
-	gpio_direction_input(PALMTE_PINTDAV_GPIO);
-
-	/* Set USB-or-DC-IN pin as input (unused) */
-	if (gpio_request(PALMTE_USB_OR_DC_GPIO, "USB/DC-IN") < 0) {
-		printk(KERN_ERR "Could not reserve cable signal GPIO!\n");
-		return;
-	}
-	gpio_direction_input(PALMTE_USB_OR_DC_GPIO);
-}
-
 #if IS_ENABLED(CONFIG_MMC_OMAP)
 
 static struct omap_mmc_platform_data _palmte_mmc_config = {
@@ -231,8 +215,23 @@ static void palmte_mmc_init(void)
 
 #endif /* CONFIG_MMC_OMAP */
 
+static struct gpiod_lookup_table palmte_irq_gpio_table = {
+	.dev_id = NULL,
+	.table = {
+		/* GPIO used for TSC2102 PINTDAV IRQ */
+		GPIO_LOOKUP("gpio-0-15", PALMTE_PINTDAV_GPIO, "tsc2102_irq",
+			    GPIO_ACTIVE_HIGH),
+		/* GPIO used for USB or DC input detection */
+		GPIO_LOOKUP("gpio-0-15", PALMTE_USB_OR_DC_GPIO, "usb_dc_irq",
+			    GPIO_ACTIVE_HIGH),
+		{ }
+	},
+};
+
 static void __init omap_palmte_init(void)
 {
+	struct gpio_desc *d;
+
 	/* mux pins for uarts */
 	omap_cfg_reg(UART1_TX);
 	omap_cfg_reg(UART1_RTS);
@@ -243,9 +242,21 @@ static void __init omap_palmte_init(void)
 
 	platform_add_devices(palmte_devices, ARRAY_SIZE(palmte_devices));
 
-	palmte_spi_info[0].irq = gpio_to_irq(PALMTE_PINTDAV_GPIO);
+	gpiod_add_lookup_table(&palmte_irq_gpio_table);
+	d = gpiod_get(NULL, "tsc2102_irq", GPIOD_IN);
+	if (IS_ERR(d))
+		pr_err("Unable to get TSC2102 IRQ GPIO descriptor\n");
+	else
+		palmte_spi_info[0].irq = gpiod_to_irq(d);
 	spi_register_board_info(palmte_spi_info, ARRAY_SIZE(palmte_spi_info));
-	palmte_misc_gpio_setup();
+
+	/* We are getting this just to set it up as input */
+	d = gpiod_get(NULL, "usb_dc_irq", GPIOD_IN);
+	if (IS_ERR(d))
+		pr_err("Unable to get USB/DC IRQ GPIO descriptor\n");
+	else
+		gpiod_put(d);
+
 	omap_serial_init();
 	omap1_usb_init(&palmte_usb_config);
 	omap_register_i2c_bus(1, 100, NULL, 0);
diff --git a/arch/arm/mach-omap1/board-sx1-mmc.c b/arch/arm/mach-omap1/board-sx1-mmc.c
index f1c160924dfe..f183a8448a7b 100644
--- a/arch/arm/mach-omap1/board-sx1-mmc.c
+++ b/arch/arm/mach-omap1/board-sx1-mmc.c
@@ -9,7 +9,6 @@
  * Copyright (C) 2007 Instituto Nokia de Tecnologia - INdT
  */
 
-#include <linux/gpio.h>
 #include <linux/platform_device.h>
 
 #include "hardware.h"
diff --git a/arch/arm/mach-omap1/board-sx1.c b/arch/arm/mach-omap1/board-sx1.c
index 0c0cdd5e77c7..a13c630be7b7 100644
--- a/arch/arm/mach-omap1/board-sx1.c
+++ b/arch/arm/mach-omap1/board-sx1.c
@@ -11,7 +11,8 @@
 * Maintainters : Vladimir Ananiev (aka Vovan888), Sergge
 *		oslik.ru
 */
-#include <linux/gpio.h>
+#include <linux/gpio/machine.h>
+#include <linux/gpio/consumer.h>
 #include <linux/kernel.h>
 #include <linux/init.h>
 #include <linux/input.h>
@@ -304,8 +305,23 @@ static struct platform_device *sx1_devices[] __initdata = {
 
 /*-----------------------------------------*/
 
+static struct gpiod_lookup_table sx1_gpio_table = {
+	.dev_id = NULL,
+	.table = {
+		GPIO_LOOKUP("gpio-0-15", 1, "irda_off",
+			    GPIO_ACTIVE_HIGH),
+		GPIO_LOOKUP("gpio-0-15", 11, "switch",
+			    GPIO_ACTIVE_HIGH),
+		GPIO_LOOKUP("gpio-0-15", 15, "usb_on",
+			    GPIO_ACTIVE_HIGH),
+		{ }
+	},
+};
+
 static void __init omap_sx1_init(void)
 {
+	struct gpio_desc *d;
+
 	/* mux pins for uarts */
 	omap_cfg_reg(UART1_TX);
 	omap_cfg_reg(UART1_RTS);
@@ -320,15 +336,25 @@ static void __init omap_sx1_init(void)
 	omap_register_i2c_bus(1, 100, NULL, 0);
 	omap1_usb_init(&sx1_usb_config);
 	sx1_mmc_init();
+	gpiod_add_lookup_table(&sx1_gpio_table);
 
 	/* turn on USB power */
 	/* sx1_setusbpower(1); can't do it here because i2c is not ready */
-	gpio_request(1, "A_IRDA_OFF");
-	gpio_request(11, "A_SWITCH");
-	gpio_request(15, "A_USB_ON");
-	gpio_direction_output(1, 1);	/*A_IRDA_OFF = 1 */
-	gpio_direction_output(11, 0);	/*A_SWITCH = 0 */
-	gpio_direction_output(15, 0);	/*A_USB_ON = 0 */
+	d = gpiod_get(NULL, "irda_off", GPIOD_OUT_HIGH);
+	if (IS_ERR(d))
+		pr_err("Unable to get IRDA OFF GPIO descriptor\n");
+	else
+		gpiod_put(d);
+	d = gpiod_get(NULL, "switch", GPIOD_OUT_LOW);
+	if (IS_ERR(d))
+		pr_err("Unable to get SWITCH GPIO descriptor\n");
+	else
+		gpiod_put(d);
+	d = gpiod_get(NULL, "usb_on", GPIOD_OUT_LOW);
+	if (IS_ERR(d))
+		pr_err("Unable to get USB ON GPIO descriptor\n");
+	else
+		gpiod_put(d);
 
 	omapfb_set_lcd_config(&sx1_lcd_config);
 }
diff --git a/arch/arm/mach-omap1/devices.c b/arch/arm/mach-omap1/devices.c
index 5304699c7a97..8b2c5f911e97 100644
--- a/arch/arm/mach-omap1/devices.c
+++ b/arch/arm/mach-omap1/devices.c
@@ -6,7 +6,6 @@
  */
 
 #include <linux/dma-mapping.h>
-#include <linux/gpio.h>
 #include <linux/module.h>
 #include <linux/kernel.h>
 #include <linux/init.h>
diff --git a/arch/arm/mach-omap1/gpio15xx.c b/arch/arm/mach-omap1/gpio15xx.c
index 61fa26efd865..6724af4925f2 100644
--- a/arch/arm/mach-omap1/gpio15xx.c
+++ b/arch/arm/mach-omap1/gpio15xx.c
@@ -8,7 +8,6 @@
  *	Charulatha V <charu@ti.com>
  */
 
-#include <linux/gpio.h>
 #include <linux/platform_data/gpio-omap.h>
 #include <linux/soc/ti/omap1-soc.h>
 #include <asm/irq.h>
diff --git a/arch/arm/mach-omap1/gpio16xx.c b/arch/arm/mach-omap1/gpio16xx.c
index cf052714b3f8..55acec22fef4 100644
--- a/arch/arm/mach-omap1/gpio16xx.c
+++ b/arch/arm/mach-omap1/gpio16xx.c
@@ -8,7 +8,6 @@
  *	Charulatha V <charu@ti.com>
  */
 
-#include <linux/gpio.h>
 #include <linux/platform_data/gpio-omap.h>
 #include <linux/soc/ti/omap1-io.h>
 
diff --git a/arch/arm/mach-omap1/irq.c b/arch/arm/mach-omap1/irq.c
index bfc7ab010ae2..af06a8753fdc 100644
--- a/arch/arm/mach-omap1/irq.c
+++ b/arch/arm/mach-omap1/irq.c
@@ -35,7 +35,6 @@
  * with this program; if not, write  to the Free Software Foundation, Inc.,
  * 675 Mass Ave, Cambridge, MA 02139, USA.
  */
-#include <linux/gpio.h>
 #include <linux/init.h>
 #include <linux/module.h>
 #include <linux/sched.h>
diff --git a/arch/arm/mach-omap1/serial.c b/arch/arm/mach-omap1/serial.c
index 19ea9842acc1..ffa4a9bece1e 100644
--- a/arch/arm/mach-omap1/serial.c
+++ b/arch/arm/mach-omap1/serial.c
@@ -4,7 +4,8 @@
  *
  * OMAP1 serial support.
  */
-#include <linux/gpio.h>
+#include <linux/gpio/machine.h>
+#include <linux/gpio/consumer.h>
 #include <linux/module.h>
 #include <linux/kernel.h>
 #include <linux/init.h>
@@ -197,39 +198,38 @@ void omap_serial_wake_trigger(int enable)
 	}
 }
 
-static void __init omap_serial_set_port_wakeup(int gpio_nr)
+static void __init omap_serial_set_port_wakeup(int idx)
 {
+	struct gpio_desc *d;
 	int ret;
 
-	ret = gpio_request(gpio_nr, "UART wake");
-	if (ret < 0) {
-		printk(KERN_ERR "Could not request UART wake GPIO: %i\n",
-		       gpio_nr);
+	d = gpiod_get_index(NULL, "wakeup", idx, GPIOD_IN);
+	if (IS_ERR(d)) {
+		pr_err("Unable to get UART wakeup GPIO descriptor\n");
 		return;
 	}
-	gpio_direction_input(gpio_nr);
-	ret = request_irq(gpio_to_irq(gpio_nr), &omap_serial_wake_interrupt,
+	ret = request_irq(gpiod_to_irq(d), &omap_serial_wake_interrupt,
 			  IRQF_TRIGGER_RISING, "serial wakeup", NULL);
 	if (ret) {
-		gpio_free(gpio_nr);
-		printk(KERN_ERR "No interrupt for UART wake GPIO: %i\n",
-		       gpio_nr);
+		gpiod_put(d);
+		pr_err("No interrupt for UART%d wake GPIO\n", idx + 1);
 		return;
 	}
-	enable_irq_wake(gpio_to_irq(gpio_nr));
+	enable_irq_wake(gpiod_to_irq(d));
 }
 
+
 int __init omap_serial_wakeup_init(void)
 {
 	if (!cpu_is_omap16xx())
 		return 0;
 
 	if (uart1_ck != NULL)
-		omap_serial_set_port_wakeup(37);
+		omap_serial_set_port_wakeup(0);
 	if (uart2_ck != NULL)
-		omap_serial_set_port_wakeup(18);
+		omap_serial_set_port_wakeup(1);
 	if (uart3_ck != NULL)
-		omap_serial_set_port_wakeup(49);
+		omap_serial_set_port_wakeup(2);
 
 	return 0;
 }
diff --git a/arch/arm/mach-omap2/board-n8x0.c b/arch/arm/mach-omap2/board-n8x0.c
index 3353b0a923d9..564bf80a2621 100644
--- a/arch/arm/mach-omap2/board-n8x0.c
+++ b/arch/arm/mach-omap2/board-n8x0.c
@@ -10,7 +10,8 @@
 
 #include <linux/clk.h>
 #include <linux/delay.h>
-#include <linux/gpio.h>
+#include <linux/gpio/machine.h>
+#include <linux/gpio/consumer.h>
 #include <linux/init.h>
 #include <linux/io.h>
 #include <linux/irq.h>
@@ -28,13 +29,12 @@
 
 #include "common.h"
 #include "mmc.h"
+#include "usb-tusb6010.h"
 #include "soc.h"
 #include "common-board-devices.h"
 
 #define TUSB6010_ASYNC_CS	1
 #define TUSB6010_SYNC_CS	4
-#define TUSB6010_GPIO_INT	58
-#define TUSB6010_GPIO_ENABLE	0
 #define TUSB6010_DMACHAN	0x3f
 
 #define NOKIA_N810_WIMAX	(1 << 2)
@@ -61,37 +61,6 @@ static void board_check_revision(void)
 }
 
 #if IS_ENABLED(CONFIG_USB_MUSB_TUSB6010)
-/*
- * Enable or disable power to TUSB6010. When enabling, turn on 3.3 V and
- * 1.5 V voltage regulators of PM companion chip. Companion chip will then
- * provide then PGOOD signal to TUSB6010 which will release it from reset.
- */
-static int tusb_set_power(int state)
-{
-	int i, retval = 0;
-
-	if (state) {
-		gpio_set_value(TUSB6010_GPIO_ENABLE, 1);
-		msleep(1);
-
-		/* Wait until TUSB6010 pulls INT pin down */
-		i = 100;
-		while (i && gpio_get_value(TUSB6010_GPIO_INT)) {
-			msleep(1);
-			i--;
-		}
-
-		if (!i) {
-			printk(KERN_ERR "tusb: powerup failed\n");
-			retval = -ENODEV;
-		}
-	} else {
-		gpio_set_value(TUSB6010_GPIO_ENABLE, 0);
-		msleep(10);
-	}
-
-	return retval;
-}
 
 static struct musb_hdrc_config musb_config = {
 	.multipoint	= 1,
@@ -102,39 +71,36 @@ static struct musb_hdrc_config musb_config = {
 
 static struct musb_hdrc_platform_data tusb_data = {
 	.mode		= MUSB_OTG,
-	.set_power	= tusb_set_power,
 	.min_power	= 25,	/* x2 = 50 mA drawn from VBUS as peripheral */
 	.power		= 100,	/* Max 100 mA VBUS for host mode */
 	.config		= &musb_config,
 };
 
+static struct gpiod_lookup_table tusb_gpio_table = {
+	.dev_id = "musb-tusb",
+	.table = {
+		GPIO_LOOKUP("gpio-0-15", 0, "enable",
+			    GPIO_ACTIVE_HIGH),
+		GPIO_LOOKUP("gpio-48-63", 10, "int",
+			    GPIO_ACTIVE_HIGH),
+		{ }
+	},
+};
+
 static void __init n8x0_usb_init(void)
 {
 	int ret = 0;
-	static const char announce[] __initconst = KERN_INFO "TUSB 6010\n";
-
-	/* PM companion chip power control pin */
-	ret = gpio_request_one(TUSB6010_GPIO_ENABLE, GPIOF_OUT_INIT_LOW,
-			       "TUSB6010 enable");
-	if (ret != 0) {
-		printk(KERN_ERR "Could not get TUSB power GPIO%i\n",
-		       TUSB6010_GPIO_ENABLE);
-		return;
-	}
-	tusb_set_power(0);
 
+	gpiod_add_lookup_table(&tusb_gpio_table);
 	ret = tusb6010_setup_interface(&tusb_data, TUSB6010_REFCLK_19, 2,
-					TUSB6010_ASYNC_CS, TUSB6010_SYNC_CS,
-					TUSB6010_GPIO_INT, TUSB6010_DMACHAN);
+				       TUSB6010_ASYNC_CS, TUSB6010_SYNC_CS,
+				       TUSB6010_DMACHAN);
 	if (ret != 0)
-		goto err;
+		return;
 
-	printk(announce);
+	pr_info("TUSB 6010\n");
 
 	return;
-
-err:
-	gpio_free(TUSB6010_GPIO_ENABLE);
 }
 #else
 
@@ -170,22 +136,32 @@ static struct spi_board_info n800_spi_board_info[] __initdata = {
  * GPIO23 and GPIO9		slot 2 EMMC on N810
  *
  */
-#define N8X0_SLOT_SWITCH_GPIO	96
-#define N810_EMMC_VSD_GPIO	23
-#define N810_EMMC_VIO_GPIO	9
-
 static int slot1_cover_open;
 static int slot2_cover_open;
 static struct device *mmc_device;
 
-static int n8x0_mmc_switch_slot(struct device *dev, int slot)
-{
-#ifdef CONFIG_MMC_DEBUG
-	dev_dbg(dev, "Choose slot %d\n", slot + 1);
-#endif
-	gpio_set_value(N8X0_SLOT_SWITCH_GPIO, slot);
-	return 0;
-}
+static struct gpiod_lookup_table nokia8xx_mmc_gpio_table = {
+	.dev_id = "mmci-omap.0",
+	.table = {
+		/* Slot switch, GPIO 96 */
+		GPIO_LOOKUP("gpio-80-111", 16,
+			    "switch", GPIO_ACTIVE_HIGH),
+		{ }
+	},
+};
+
+static struct gpiod_lookup_table nokia810_mmc_gpio_table = {
+	.dev_id = "mmci-omap.0",
+	.table = {
+		/* Slot index 1, VSD power, GPIO 23 */
+		GPIO_LOOKUP_IDX("gpio-16-31", 7,
+				"vsd", 1, GPIO_ACTIVE_HIGH),
+		/* Slot index 1, VIO power, GPIO 9 */
+		GPIO_LOOKUP_IDX("gpio-0-15", 9,
+				"vsd", 1, GPIO_ACTIVE_HIGH),
+		{ }
+	},
+};
 
 static int n8x0_mmc_set_power_menelaus(struct device *dev, int slot,
 					int power_on, int vdd)
@@ -256,31 +232,13 @@ static int n8x0_mmc_set_power_menelaus(struct device *dev, int slot,
 	return 0;
 }
 
-static void n810_set_power_emmc(struct device *dev,
-					 int power_on)
-{
-	dev_dbg(dev, "Set EMMC power %s\n", power_on ? "on" : "off");
-
-	if (power_on) {
-		gpio_set_value(N810_EMMC_VSD_GPIO, 1);
-		msleep(1);
-		gpio_set_value(N810_EMMC_VIO_GPIO, 1);
-		msleep(1);
-	} else {
-		gpio_set_value(N810_EMMC_VIO_GPIO, 0);
-		msleep(50);
-		gpio_set_value(N810_EMMC_VSD_GPIO, 0);
-		msleep(50);
-	}
-}
-
 static int n8x0_mmc_set_power(struct device *dev, int slot, int power_on,
 			      int vdd)
 {
 	if (board_is_n800() || slot == 0)
 		return n8x0_mmc_set_power_menelaus(dev, slot, power_on, vdd);
 
-	n810_set_power_emmc(dev, power_on);
+	/* The n810 power will be handled by GPIO code in the driver */
 
 	return 0;
 }
@@ -418,13 +376,6 @@ static void n8x0_mmc_shutdown(struct device *dev)
 static void n8x0_mmc_cleanup(struct device *dev)
 {
 	menelaus_unregister_mmc_callback();
-
-	gpio_free(N8X0_SLOT_SWITCH_GPIO);
-
-	if (board_is_n810()) {
-		gpio_free(N810_EMMC_VSD_GPIO);
-		gpio_free(N810_EMMC_VIO_GPIO);
-	}
 }
 
 /*
@@ -433,7 +384,6 @@ static void n8x0_mmc_cleanup(struct device *dev)
  */
 static struct omap_mmc_platform_data mmc1_data = {
 	.nr_slots			= 0,
-	.switch_slot			= n8x0_mmc_switch_slot,
 	.init				= n8x0_mmc_late_init,
 	.cleanup			= n8x0_mmc_cleanup,
 	.shutdown			= n8x0_mmc_shutdown,
@@ -463,14 +413,9 @@ static struct omap_mmc_platform_data mmc1_data = {
 
 static struct omap_mmc_platform_data *mmc_data[OMAP24XX_NR_MMC];
 
-static struct gpio n810_emmc_gpios[] __initdata = {
-	{ N810_EMMC_VSD_GPIO, GPIOF_OUT_INIT_LOW,  "MMC slot 2 Vddf" },
-	{ N810_EMMC_VIO_GPIO, GPIOF_OUT_INIT_LOW,  "MMC slot 2 Vdd"  },
-};
-
 static void __init n8x0_mmc_init(void)
 {
-	int err;
+	gpiod_add_lookup_table(&nokia8xx_mmc_gpio_table);
 
 	if (board_is_n810()) {
 		mmc1_data.slots[0].name = "external";
@@ -483,20 +428,7 @@ static void __init n8x0_mmc_init(void)
 		 */
 		mmc1_data.slots[1].name = "internal";
 		mmc1_data.slots[1].ban_openended = 1;
-	}
-
-	err = gpio_request_one(N8X0_SLOT_SWITCH_GPIO, GPIOF_OUT_INIT_LOW,
-			       "MMC slot switch");
-	if (err)
-		return;
-
-	if (board_is_n810()) {
-		err = gpio_request_array(n810_emmc_gpios,
-					 ARRAY_SIZE(n810_emmc_gpios));
-		if (err) {
-			gpio_free(N8X0_SLOT_SWITCH_GPIO);
-			return;
-		}
+		gpiod_add_lookup_table(&nokia810_mmc_gpio_table);
 	}
 
 	mmc1_data.nr_slots = 2;
diff --git a/arch/arm/mach-omap2/omap_device.c b/arch/arm/mach-omap2/omap_device.c
index 4afa2f08e668..fca7869c8075 100644
--- a/arch/arm/mach-omap2/omap_device.c
+++ b/arch/arm/mach-omap2/omap_device.c
@@ -244,7 +244,6 @@ static int _omap_device_notifier_call(struct notifier_block *nb,
 	case BUS_NOTIFY_ADD_DEVICE:
 		if (pdev->dev.of_node)
 			omap_device_build_from_dt(pdev);
-		omap_auxdata_legacy_init(dev);
 		fallthrough;
 	default:
 		od = to_omap_device(pdev);
diff --git a/arch/arm/mach-omap2/pdata-quirks.c b/arch/arm/mach-omap2/pdata-quirks.c
index 04208cc52784..c1c0121f478d 100644
--- a/arch/arm/mach-omap2/pdata-quirks.c
+++ b/arch/arm/mach-omap2/pdata-quirks.c
@@ -6,8 +6,8 @@
  */
 #include <linux/clk.h>
 #include <linux/davinci_emac.h>
+#include <linux/gpio/machine.h>
 #include <linux/gpio/consumer.h>
-#include <linux/gpio.h>
 #include <linux/init.h>
 #include <linux/kernel.h>
 #include <linux/of_platform.h>
@@ -41,7 +41,6 @@ struct pdata_init {
 };
 
 static struct of_dev_auxdata omap_auxdata_lookup[];
-static struct twl4030_gpio_platform_data twl_gpio_auxdata;
 
 #ifdef CONFIG_MACH_NOKIA_N8X0
 static void __init omap2420_n8x0_legacy_init(void)
@@ -98,52 +97,43 @@ static struct iommu_platform_data omap3_iommu_isp_pdata = {
 };
 #endif
 
-static int omap3_sbc_t3730_twl_callback(struct device *dev,
-					   unsigned gpio,
-					   unsigned ngpio)
+static void __init omap3_sbc_t3x_usb_hub_init(char *hub_name, int idx)
 {
-	int res;
+	struct gpio_desc *d;
 
-	res = gpio_request_one(gpio + 2, GPIOF_OUT_INIT_HIGH,
-			       "wlan pwr");
-	if (res)
-		return res;
-
-	gpiod_export(gpio_to_desc(gpio), 0);
-
-	return 0;
-}
-
-static void __init omap3_sbc_t3x_usb_hub_init(int gpio, char *hub_name)
-{
-	int err = gpio_request_one(gpio, GPIOF_OUT_INIT_LOW, hub_name);
-
-	if (err) {
-		pr_err("SBC-T3x: %s reset gpio request failed: %d\n",
-			hub_name, err);
+	/* This asserts the RESET line (reverse polarity) */
+	d = gpiod_get_index(NULL, "reset", idx, GPIOD_OUT_HIGH);
+	if (IS_ERR(d)) {
+		pr_err("Unable to get T3x USB reset GPIO descriptor\n");
 		return;
 	}
-
-	gpiod_export(gpio_to_desc(gpio), 0);
-
+	gpiod_set_consumer_name(d, hub_name);
+	gpiod_export(d, 0);
 	udelay(10);
-	gpio_set_value(gpio, 1);
+	/* De-assert RESET */
+	gpiod_set_value(d, 0);
 	msleep(1);
 }
 
-static void __init omap3_sbc_t3730_twl_init(void)
-{
-	twl_gpio_auxdata.setup = omap3_sbc_t3730_twl_callback;
-}
+static struct gpiod_lookup_table omap3_sbc_t3x_usb_gpio_table = {
+	.dev_id = NULL,
+	.table = {
+		GPIO_LOOKUP_IDX("gpio-160-175", 7, "reset", 0,
+				GPIO_ACTIVE_LOW),
+		{ }
+	},
+};
 
 static void __init omap3_sbc_t3730_legacy_init(void)
 {
-	omap3_sbc_t3x_usb_hub_init(167, "sb-t35 usb hub");
+	gpiod_add_lookup_table(&omap3_sbc_t3x_usb_gpio_table);
+	omap3_sbc_t3x_usb_hub_init("sb-t35 usb hub", 0);
 }
 
 static void __init omap3_sbc_t3530_legacy_init(void)
 {
-	omap3_sbc_t3x_usb_hub_init(167, "sb-t35 usb hub");
+	gpiod_add_lookup_table(&omap3_sbc_t3x_usb_gpio_table);
+	omap3_sbc_t3x_usb_hub_init("sb-t35 usb hub", 0);
 }
 
 static void __init omap3_evm_legacy_init(void)
@@ -187,31 +177,59 @@ static void __init am35xx_emac_reset(void)
 	omap_ctrl_readl(AM35XX_CONTROL_IP_SW_RESET); /* OCP barrier */
 }
 
-static struct gpio cm_t3517_wlan_gpios[] __initdata = {
-	{ 56,	GPIOF_OUT_INIT_HIGH,	"wlan pwr" },
-	{ 4,	GPIOF_OUT_INIT_HIGH,	"xcvr noe" },
+static struct gpiod_lookup_table cm_t3517_wlan_gpio_table = {
+	.dev_id = NULL,
+	.table = {
+		GPIO_LOOKUP("gpio-48-53", 8, "power",
+			    GPIO_ACTIVE_HIGH),
+		GPIO_LOOKUP("gpio-0-15", 4, "noe",
+			    GPIO_ACTIVE_HIGH),
+		{ }
+	},
 };
 
 static void __init omap3_sbc_t3517_wifi_init(void)
 {
-	int err = gpio_request_array(cm_t3517_wlan_gpios,
-				ARRAY_SIZE(cm_t3517_wlan_gpios));
-	if (err) {
-		pr_err("SBC-T3517: wl12xx gpios request failed: %d\n", err);
-		return;
-	}
+	struct gpio_desc *d;
+
+	gpiod_add_lookup_table(&cm_t3517_wlan_gpio_table);
 
-	gpiod_export(gpio_to_desc(cm_t3517_wlan_gpios[0].gpio), 0);
-	gpiod_export(gpio_to_desc(cm_t3517_wlan_gpios[1].gpio), 0);
+	/* This asserts the RESET line (reverse polarity) */
+	d = gpiod_get(NULL, "power", GPIOD_OUT_HIGH);
+	if (IS_ERR(d)) {
+		pr_err("Unable to get CM T3517 WLAN power GPIO descriptor\n");
+	} else {
+		gpiod_set_consumer_name(d, "wlan pwr");
+		gpiod_export(d, 0);
+	}
 
+	d = gpiod_get(NULL, "noe", GPIOD_OUT_HIGH);
+	if (IS_ERR(d)) {
+		pr_err("Unable to get CM T3517 WLAN XCVR NOE GPIO descriptor\n");
+	} else {
+		gpiod_set_consumer_name(d, "xcvr noe");
+		gpiod_export(d, 0);
+	}
 	msleep(100);
-	gpio_set_value(cm_t3517_wlan_gpios[1].gpio, 0);
-}
+	gpiod_set_value(d, 0);
+}
+
+static struct gpiod_lookup_table omap3_sbc_t3517_usb_gpio_table = {
+	.dev_id = NULL,
+	.table = {
+		GPIO_LOOKUP_IDX("gpio-144-159", 8, "reset", 0,
+				GPIO_ACTIVE_LOW),
+		GPIO_LOOKUP_IDX("gpio-96-111", 2, "reset", 1,
+				GPIO_ACTIVE_LOW),
+		{ }
+	},
+};
 
 static void __init omap3_sbc_t3517_legacy_init(void)
 {
-	omap3_sbc_t3x_usb_hub_init(152, "cm-t3517 usb hub");
-	omap3_sbc_t3x_usb_hub_init(98, "sb-t35 usb hub");
+	gpiod_add_lookup_table(&omap3_sbc_t3517_usb_gpio_table);
+	omap3_sbc_t3x_usb_hub_init("cm-t3517 usb hub", 0);
+	omap3_sbc_t3x_usb_hub_init("sb-t35 usb hub", 1);
 	am35xx_emac_reset();
 	hsmmc2_internal_input_clk();
 	omap3_sbc_t3517_wifi_init();
@@ -393,21 +411,6 @@ static struct ti_prm_platform_data ti_prm_pdata = {
 	.clkdm_lookup = clkdm_lookup,
 };
 
-/*
- * GPIOs for TWL are initialized by the I2C bus and need custom
- * handing until DSS has device tree bindings.
- */
-void omap_auxdata_legacy_init(struct device *dev)
-{
-	if (dev->platform_data)
-		return;
-
-	if (strcmp("twl4030-gpio", dev_name(dev)))
-		return;
-
-	dev->platform_data = &twl_gpio_auxdata;
-}
-
 #if defined(CONFIG_ARCH_OMAP3) && IS_ENABLED(CONFIG_SND_SOC_OMAP_MCBSP)
 static struct omap_mcbsp_platform_data mcbsp_pdata;
 static void __init omap3_mcbsp_init(void)
@@ -428,9 +431,6 @@ static struct pdata_init auxdata_quirks[] __initdata = {
 	{ "nokia,n810", omap2420_n8x0_legacy_init, },
 	{ "nokia,n810-wimax", omap2420_n8x0_legacy_init, },
 #endif
-#ifdef CONFIG_ARCH_OMAP3
-	{ "compulab,omap3-sbc-t3730", omap3_sbc_t3730_twl_init, },
-#endif
 	{ /* sentinel */ },
 };
 
diff --git a/arch/arm/mach-omap2/usb-tusb6010.c b/arch/arm/mach-omap2/usb-tusb6010.c
index 18fa52f828dc..b46c254c2bc4 100644
--- a/arch/arm/mach-omap2/usb-tusb6010.c
+++ b/arch/arm/mach-omap2/usb-tusb6010.c
@@ -11,12 +11,12 @@
 #include <linux/errno.h>
 #include <linux/delay.h>
 #include <linux/platform_device.h>
-#include <linux/gpio.h>
 #include <linux/export.h>
 #include <linux/platform_data/usb-omap.h>
 
 #include <linux/usb/musb.h>
 
+#include "usb-tusb6010.h"
 #include "gpmc.h"
 
 static u8		async_cs, sync_cs;
@@ -132,10 +132,6 @@ static struct resource tusb_resources[] = {
 	{ /* Synchronous access */
 		.flags	= IORESOURCE_MEM,
 	},
-	{ /* IRQ */
-		.name	= "mc",
-		.flags	= IORESOURCE_IRQ,
-	},
 };
 
 static u64 tusb_dmamask = ~(u32)0;
@@ -154,9 +150,9 @@ static struct platform_device tusb_device = {
 
 /* this may be called only from board-*.c setup code */
 int __init tusb6010_setup_interface(struct musb_hdrc_platform_data *data,
-		unsigned ps_refclk, unsigned waitpin,
-		unsigned async, unsigned sync,
-		unsigned irq, unsigned dmachan)
+		unsigned int ps_refclk, unsigned int waitpin,
+		unsigned int async, unsigned int sync,
+		unsigned int dmachan)
 {
 	int		status;
 	static char	error[] __initdata =
@@ -192,14 +188,6 @@ int __init tusb6010_setup_interface(struct musb_hdrc_platform_data *data,
 	if (status < 0)
 		return status;
 
-	/* IRQ */
-	status = gpio_request_one(irq, GPIOF_IN, "TUSB6010 irq");
-	if (status < 0) {
-		printk(error, 3, status);
-		return status;
-	}
-	tusb_resources[2].start = gpio_to_irq(irq);
-
 	/* set up memory timings ... can speed them up later */
 	if (!ps_refclk) {
 		printk(error, 4, status);
diff --git a/arch/arm/mach-omap2/usb-tusb6010.h b/arch/arm/mach-omap2/usb-tusb6010.h
new file mode 100644
index 000000000000..d210ff6238c2
--- /dev/null
+++ b/arch/arm/mach-omap2/usb-tusb6010.h
@@ -0,0 +1,12 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+
+#ifndef __USB_TUSB6010_H
+#define __USB_TUSB6010_H
+
+extern int __init tusb6010_setup_interface(
+		struct musb_hdrc_platform_data *data,
+		unsigned int ps_refclk, unsigned int waitpin,
+		unsigned int async_cs, unsigned int sync_cs,
+		unsigned int dmachan);
+
+#endif /* __USB_TUSB6010_H */
diff --git a/arch/arm/mach-pxa/spitz.c b/arch/arm/mach-pxa/spitz.c
index 4325bdc2b9ff..28e376e06fdc 100644
--- a/arch/arm/mach-pxa/spitz.c
+++ b/arch/arm/mach-pxa/spitz.c
@@ -506,10 +506,18 @@ static struct ads7846_platform_data spitz_ads7846_info = {
 	.x_plate_ohms		= 419,
 	.y_plate_ohms		= 486,
 	.pressure_max		= 1024,
-	.gpio_pendown		= SPITZ_GPIO_TP_INT,
 	.wait_for_sync		= spitz_ads7846_wait_for_hsync,
 };
 
+static struct gpiod_lookup_table spitz_ads7846_gpio_table = {
+	.dev_id = "spi2.0",
+	.table = {
+		GPIO_LOOKUP("gpio-pxa", SPITZ_GPIO_TP_INT,
+			    "pendown", GPIO_ACTIVE_LOW),
+		{ }
+	},
+};
+
 static void spitz_bl_kick_battery(void)
 {
 	void (*kick_batt)(void);
@@ -594,6 +602,7 @@ static void __init spitz_spi_init(void)
 	else
 		gpiod_add_lookup_table(&spitz_lcdcon_gpio_table);
 
+	gpiod_add_lookup_table(&spitz_ads7846_gpio_table);
 	gpiod_add_lookup_table(&spitz_spi_gpio_table);
 	pxa2xx_set_spi_info(2, &spitz_spi_info);
 	spi_register_board_info(ARRAY_AND_SIZE(spitz_spi_devices));
diff --git a/arch/mips/alchemy/devboards/db1000.c b/arch/mips/alchemy/devboards/db1000.c
index 2c52ee27b4f2..79d66faa8482 100644
--- a/arch/mips/alchemy/devboards/db1000.c
+++ b/arch/mips/alchemy/devboards/db1000.c
@@ -381,13 +381,21 @@ static struct platform_device db1100_mmc1_dev = {
 static struct ads7846_platform_data db1100_touch_pd = {
 	.model		= 7846,
 	.vref_mv	= 3300,
-	.gpio_pendown	= 21,
 };
 
 static struct spi_gpio_platform_data db1100_spictl_pd = {
 	.num_chipselect = 1,
 };
 
+static struct gpiod_lookup_table db1100_touch_gpio_table = {
+	.dev_id = "spi0.0",
+	.table = {
+		GPIO_LOOKUP("alchemy-gpio2", 21,
+			    "pendown", GPIO_ACTIVE_LOW),
+		{ }
+	},
+};
+
 static struct spi_board_info db1100_spi_info[] __initdata = {
 	[0] = {
 		.modalias	 = "ads7846",
@@ -474,6 +482,7 @@ int __init db1000_dev_setup(void)
 		pfc |= (1 << 0);	/* SSI0 pins as GPIOs */
 		alchemy_wrsys(pfc, AU1000_SYS_PINFUNC);
 
+		gpiod_add_lookup_table(&db1100_touch_gpio_table);
 		spi_register_board_info(db1100_spi_info,
 					ARRAY_SIZE(db1100_spi_info));
 
diff --git a/drivers/gpio/gpio-twl4030.c b/drivers/gpio/gpio-twl4030.c
index c1bb2c3ca6f2..446599ac234a 100644
--- a/drivers/gpio/gpio-twl4030.c
+++ b/drivers/gpio/gpio-twl4030.c
@@ -17,7 +17,9 @@
 #include <linux/interrupt.h>
 #include <linux/kthread.h>
 #include <linux/irq.h>
+#include <linux/gpio/machine.h>
 #include <linux/gpio/driver.h>
+#include <linux/gpio/consumer.h>
 #include <linux/platform_device.h>
 #include <linux/of.h>
 #include <linux/irqdomain.h>
@@ -465,8 +467,7 @@ static int gpio_twl4030_debounce(u32 debounce, u8 mmc_cd)
 				REG_GPIO_DEBEN1, 3);
 }
 
-static struct twl4030_gpio_platform_data *of_gpio_twl4030(struct device *dev,
-				struct twl4030_gpio_platform_data *pdata)
+static struct twl4030_gpio_platform_data *of_gpio_twl4030(struct device *dev)
 {
 	struct twl4030_gpio_platform_data *omap_twl_info;
 
@@ -474,9 +475,6 @@ static struct twl4030_gpio_platform_data *of_gpio_twl4030(struct device *dev,
 	if (!omap_twl_info)
 		return NULL;
 
-	if (pdata)
-		*omap_twl_info = *pdata;
-
 	omap_twl_info->use_leds = of_property_read_bool(dev->of_node,
 			"ti,use-leds");
 
@@ -504,9 +502,18 @@ static int gpio_twl4030_remove(struct platform_device *pdev)
 	return 0;
 }
 
+/* Called from the registered devm action */
+static void gpio_twl4030_power_off_action(void *data)
+{
+	struct gpio_desc *d = data;
+
+	gpiod_unexport(d);
+	gpiochip_free_own_desc(d);
+}
+
 static int gpio_twl4030_probe(struct platform_device *pdev)
 {
-	struct twl4030_gpio_platform_data *pdata = dev_get_platdata(&pdev->dev);
+	struct twl4030_gpio_platform_data *pdata;
 	struct device_node *node = pdev->dev.of_node;
 	struct gpio_twl4030_priv *priv;
 	int ret, irq_base;
@@ -546,9 +553,7 @@ no_irqs:
 
 	mutex_init(&priv->mutex);
 
-	if (node)
-		pdata = of_gpio_twl4030(&pdev->dev, pdata);
-
+	pdata = of_gpio_twl4030(&pdev->dev);
 	if (pdata == NULL) {
 		dev_err(&pdev->dev, "Platform data is missing\n");
 		return -ENXIO;
@@ -585,17 +590,32 @@ no_irqs:
 		goto out;
 	}
 
-	platform_set_drvdata(pdev, priv);
+	/*
+	 * Special quirk for the OMAP3 to hog and export a WLAN power
+	 * GPIO.
+	 */
+	if (IS_ENABLED(CONFIG_ARCH_OMAP3) &&
+	    of_machine_is_compatible("compulab,omap3-sbc-t3730")) {
+		struct gpio_desc *d;
 
-	if (pdata->setup) {
-		int status;
+		d = gpiochip_request_own_desc(&priv->gpio_chip,
+						 2, "wlan pwr",
+						 GPIO_ACTIVE_HIGH,
+						 GPIOD_OUT_HIGH);
+		if (IS_ERR(d))
+			return dev_err_probe(&pdev->dev, PTR_ERR(d),
+					     "unable to hog wlan pwr GPIO\n");
+
+		gpiod_export(d, 0);
+
+		ret = devm_add_action_or_reset(&pdev->dev, gpio_twl4030_power_off_action, d);
+		if (ret)
+			return dev_err_probe(&pdev->dev, ret,
+					     "failed to install power off handler\n");
 
-		status = pdata->setup(&pdev->dev, priv->gpio_chip.base,
-				      TWL4030_GPIO_MAX);
-		if (status)
-			dev_dbg(&pdev->dev, "setup --> %d\n", status);
 	}
 
+	platform_set_drvdata(pdev, priv);
 out:
 	return ret;
 }
diff --git a/drivers/input/touchscreen/ads7846.c b/drivers/input/touchscreen/ads7846.c
index bb1058b1e7fd..40eb27f1b23f 100644
--- a/drivers/input/touchscreen/ads7846.c
+++ b/drivers/input/touchscreen/ads7846.c
@@ -24,11 +24,8 @@
 #include <linux/interrupt.h>
 #include <linux/slab.h>
 #include <linux/pm.h>
-#include <linux/of.h>
-#include <linux/of_gpio.h>
-#include <linux/of_device.h>
+#include <linux/property.h>
 #include <linux/gpio/consumer.h>
-#include <linux/gpio.h>
 #include <linux/spi/spi.h>
 #include <linux/spi/ads7846.h>
 #include <linux/regulator/consumer.h>
@@ -140,7 +137,7 @@ struct ads7846 {
 	int			(*filter)(void *data, int data_idx, int *val);
 	void			*filter_data;
 	int			(*get_pendown_state)(void);
-	int			gpio_pendown;
+	struct gpio_desc	*gpio_pendown;
 
 	void			(*wait_for_sync)(void);
 };
@@ -223,7 +220,7 @@ static int get_pendown_state(struct ads7846 *ts)
 	if (ts->get_pendown_state)
 		return ts->get_pendown_state();
 
-	return !gpio_get_value(ts->gpio_pendown);
+	return gpiod_get_value(ts->gpio_pendown);
 }
 
 static void ads7846_report_pen_up(struct ads7846 *ts)
@@ -989,8 +986,6 @@ static int ads7846_setup_pendown(struct spi_device *spi,
 				 struct ads7846 *ts,
 				 const struct ads7846_platform_data *pdata)
 {
-	int err;
-
 	/*
 	 * REVISIT when the irq can be triggered active-low, or if for some
 	 * reason the touchscreen isn't hooked up, we don't need to access
@@ -999,25 +994,15 @@ static int ads7846_setup_pendown(struct spi_device *spi,
 
 	if (pdata->get_pendown_state) {
 		ts->get_pendown_state = pdata->get_pendown_state;
-	} else if (gpio_is_valid(pdata->gpio_pendown)) {
-
-		err = devm_gpio_request_one(&spi->dev, pdata->gpio_pendown,
-					    GPIOF_IN, "ads7846_pendown");
-		if (err) {
-			dev_err(&spi->dev,
-				"failed to request/setup pendown GPIO%d: %d\n",
-				pdata->gpio_pendown, err);
-			return err;
+	} else {
+		ts->gpio_pendown = gpiod_get(&spi->dev, "pendown", GPIOD_IN);
+		if (IS_ERR(ts->gpio_pendown)) {
+			dev_err(&spi->dev, "failed to request pendown GPIO\n");
+			return PTR_ERR(ts->gpio_pendown);
 		}
-
-		ts->gpio_pendown = pdata->gpio_pendown;
-
 		if (pdata->gpio_pendown_debounce)
-			gpiod_set_debounce(gpio_to_desc(ts->gpio_pendown),
+			gpiod_set_debounce(ts->gpio_pendown,
 					   pdata->gpio_pendown_debounce);
-	} else {
-		dev_err(&spi->dev, "no get_pendown_state nor gpio_pendown?\n");
-		return -EINVAL;
 	}
 
 	return 0;
@@ -1119,7 +1104,6 @@ static int ads7846_setup_spi_msg(struct ads7846 *ts,
 	return 0;
 }
 
-#ifdef CONFIG_OF
 static const struct of_device_id ads7846_dt_ids[] = {
 	{ .compatible = "ti,tsc2046",	.data = (void *) 7846 },
 	{ .compatible = "ti,ads7843",	.data = (void *) 7843 },
@@ -1130,20 +1114,14 @@ static const struct of_device_id ads7846_dt_ids[] = {
 };
 MODULE_DEVICE_TABLE(of, ads7846_dt_ids);
 
-static const struct ads7846_platform_data *ads7846_probe_dt(struct device *dev)
+static const struct ads7846_platform_data *ads7846_get_props(struct device *dev)
 {
 	struct ads7846_platform_data *pdata;
-	struct device_node *node = dev->of_node;
-	const struct of_device_id *match;
+	const struct platform_device_id *pdev_id;
 	u32 value;
 
-	if (!node) {
-		dev_err(dev, "Device does not have associated DT data\n");
-		return ERR_PTR(-EINVAL);
-	}
-
-	match = of_match_device(ads7846_dt_ids, dev);
-	if (!match) {
+	pdev_id = device_get_match_data(dev);
+	if (!pdev_id) {
 		dev_err(dev, "Unknown device model\n");
 		return ERR_PTR(-EINVAL);
 	}
@@ -1152,60 +1130,51 @@ static const struct ads7846_platform_data *ads7846_probe_dt(struct device *dev)
 	if (!pdata)
 		return ERR_PTR(-ENOMEM);
 
-	pdata->model = (unsigned long)match->data;
+	pdata->model = (unsigned long)pdev_id->driver_data;
 
-	of_property_read_u16(node, "ti,vref-delay-usecs",
-			     &pdata->vref_delay_usecs);
-	of_property_read_u16(node, "ti,vref-mv", &pdata->vref_mv);
-	pdata->keep_vref_on = of_property_read_bool(node, "ti,keep-vref-on");
+	device_property_read_u16(dev, "ti,vref-delay-usecs",
+				 &pdata->vref_delay_usecs);
+	device_property_read_u16(dev, "ti,vref-mv", &pdata->vref_mv);
+	pdata->keep_vref_on = device_property_read_bool(dev, "ti,keep-vref-on");
 
-	pdata->swap_xy = of_property_read_bool(node, "ti,swap-xy");
+	pdata->swap_xy = device_property_read_bool(dev, "ti,swap-xy");
 
-	of_property_read_u16(node, "ti,settle-delay-usec",
-			     &pdata->settle_delay_usecs);
-	of_property_read_u16(node, "ti,penirq-recheck-delay-usecs",
-			     &pdata->penirq_recheck_delay_usecs);
+	device_property_read_u16(dev, "ti,settle-delay-usec",
+				 &pdata->settle_delay_usecs);
+	device_property_read_u16(dev, "ti,penirq-recheck-delay-usecs",
+				 &pdata->penirq_recheck_delay_usecs);
 
-	of_property_read_u16(node, "ti,x-plate-ohms", &pdata->x_plate_ohms);
-	of_property_read_u16(node, "ti,y-plate-ohms", &pdata->y_plate_ohms);
+	device_property_read_u16(dev, "ti,x-plate-ohms", &pdata->x_plate_ohms);
+	device_property_read_u16(dev, "ti,y-plate-ohms", &pdata->y_plate_ohms);
 
-	of_property_read_u16(node, "ti,x-min", &pdata->x_min);
-	of_property_read_u16(node, "ti,y-min", &pdata->y_min);
-	of_property_read_u16(node, "ti,x-max", &pdata->x_max);
-	of_property_read_u16(node, "ti,y-max", &pdata->y_max);
+	device_property_read_u16(dev, "ti,x-min", &pdata->x_min);
+	device_property_read_u16(dev, "ti,y-min", &pdata->y_min);
+	device_property_read_u16(dev, "ti,x-max", &pdata->x_max);
+	device_property_read_u16(dev, "ti,y-max", &pdata->y_max);
 
 	/*
 	 * touchscreen-max-pressure gets parsed during
 	 * touchscreen_parse_properties()
 	 */
-	of_property_read_u16(node, "ti,pressure-min", &pdata->pressure_min);
-	if (!of_property_read_u32(node, "touchscreen-min-pressure", &value))
+	device_property_read_u16(dev, "ti,pressure-min", &pdata->pressure_min);
+	if (!device_property_read_u32(dev, "touchscreen-min-pressure", &value))
 		pdata->pressure_min = (u16) value;
-	of_property_read_u16(node, "ti,pressure-max", &pdata->pressure_max);
+	device_property_read_u16(dev, "ti,pressure-max", &pdata->pressure_max);
 
-	of_property_read_u16(node, "ti,debounce-max", &pdata->debounce_max);
-	if (!of_property_read_u32(node, "touchscreen-average-samples", &value))
+	device_property_read_u16(dev, "ti,debounce-max", &pdata->debounce_max);
+	if (!device_property_read_u32(dev, "touchscreen-average-samples", &value))
 		pdata->debounce_max = (u16) value;
-	of_property_read_u16(node, "ti,debounce-tol", &pdata->debounce_tol);
-	of_property_read_u16(node, "ti,debounce-rep", &pdata->debounce_rep);
+	device_property_read_u16(dev, "ti,debounce-tol", &pdata->debounce_tol);
+	device_property_read_u16(dev, "ti,debounce-rep", &pdata->debounce_rep);
 
-	of_property_read_u32(node, "ti,pendown-gpio-debounce",
+	device_property_read_u32(dev, "ti,pendown-gpio-debounce",
 			     &pdata->gpio_pendown_debounce);
 
-	pdata->wakeup = of_property_read_bool(node, "wakeup-source") ||
-			of_property_read_bool(node, "linux,wakeup");
-
-	pdata->gpio_pendown = of_get_named_gpio(dev->of_node, "pendown-gpio", 0);
+	pdata->wakeup = device_property_read_bool(dev, "wakeup-source") ||
+			device_property_read_bool(dev, "linux,wakeup");
 
 	return pdata;
 }
-#else
-static const struct ads7846_platform_data *ads7846_probe_dt(struct device *dev)
-{
-	dev_err(dev, "no platform data defined\n");
-	return ERR_PTR(-EINVAL);
-}
-#endif
 
 static void ads7846_regulator_disable(void *regulator)
 {
@@ -1269,7 +1238,7 @@ static int ads7846_probe(struct spi_device *spi)
 
 	pdata = dev_get_platdata(dev);
 	if (!pdata) {
-		pdata = ads7846_probe_dt(dev);
+		pdata = ads7846_get_props(dev);
 		if (IS_ERR(pdata))
 			return PTR_ERR(pdata);
 	}
@@ -1426,7 +1395,7 @@ static struct spi_driver ads7846_driver = {
 	.driver = {
 		.name	= "ads7846",
 		.pm	= pm_sleep_ptr(&ads7846_pm),
-		.of_match_table = of_match_ptr(ads7846_dt_ids),
+		.of_match_table = ads7846_dt_ids,
 	},
 	.probe		= ads7846_probe,
 	.remove		= ads7846_remove,
diff --git a/drivers/mfd/tps65010.c b/drivers/mfd/tps65010.c
index fb733288cca3..faea4ff44c6f 100644
--- a/drivers/mfd/tps65010.c
+++ b/drivers/mfd/tps65010.c
@@ -506,12 +506,8 @@ static void tps65010_remove(struct i2c_client *client)
 	struct tps65010		*tps = i2c_get_clientdata(client);
 	struct tps65010_board	*board = dev_get_platdata(&client->dev);
 
-	if (board && board->teardown) {
-		int status = board->teardown(client, board->context);
-		if (status < 0)
-			dev_dbg(&client->dev, "board %s %s err %d\n",
-				"teardown", client->name, status);
-	}
+	if (board && board->teardown)
+		board->teardown(client, &tps->chip);
 	if (client->irq > 0)
 		free_irq(client->irq, tps);
 	cancel_delayed_work_sync(&tps->work);
@@ -619,7 +615,7 @@ static int tps65010_probe(struct i2c_client *client)
 				tps, DEBUG_FOPS);
 
 	/* optionally register GPIOs */
-	if (board && board->base != 0) {
+	if (board) {
 		tps->outmask = board->outmask;
 
 		tps->chip.label = client->name;
@@ -632,7 +628,7 @@ static int tps65010_probe(struct i2c_client *client)
 		/* NOTE:  only partial support for inputs; nyet IRQs */
 		tps->chip.get = tps65010_gpio_get;
 
-		tps->chip.base = board->base;
+		tps->chip.base = -1;
 		tps->chip.ngpio = 7;
 		tps->chip.can_sleep = 1;
 
@@ -641,7 +637,7 @@ static int tps65010_probe(struct i2c_client *client)
 			dev_err(&client->dev, "can't add gpiochip, err %d\n",
 					status);
 		else if (board->setup) {
-			status = board->setup(client, board->context);
+			status = board->setup(client, &tps->chip);
 			if (status < 0) {
 				dev_dbg(&client->dev,
 					"board %s %s err %d\n",
diff --git a/drivers/mmc/host/omap.c b/drivers/mmc/host/omap.c
index ce78edfb402b..a14af21f12da 100644
--- a/drivers/mmc/host/omap.c
+++ b/drivers/mmc/host/omap.c
@@ -26,6 +26,7 @@
 #include <linux/clk.h>
 #include <linux/scatterlist.h>
 #include <linux/slab.h>
+#include <linux/gpio/consumer.h>
 #include <linux/platform_data/mmc-omap.h>
 
 
@@ -111,6 +112,9 @@ struct mmc_omap_slot {
 	struct mmc_request      *mrq;
 	struct mmc_omap_host    *host;
 	struct mmc_host		*mmc;
+	struct gpio_desc	*vsd;
+	struct gpio_desc	*vio;
+	struct gpio_desc	*cover;
 	struct omap_mmc_slot_data *pdata;
 };
 
@@ -133,6 +137,7 @@ struct mmc_omap_host {
 	int			irq;
 	unsigned char		bus_mode;
 	unsigned int		reg_shift;
+	struct gpio_desc	*slot_switch;
 
 	struct work_struct	cmd_abort_work;
 	unsigned		abort:1;
@@ -216,8 +221,13 @@ no_claim:
 
 	if (host->current_slot != slot) {
 		OMAP_MMC_WRITE(host, CON, slot->saved_con & 0xFC00);
-		if (host->pdata->switch_slot != NULL)
-			host->pdata->switch_slot(mmc_dev(slot->mmc), slot->id);
+		if (host->slot_switch)
+			/*
+			 * With two slots and a simple GPIO switch, setting
+			 * the GPIO to 0 selects slot ID 0, setting it to 1
+			 * selects slot ID 1.
+			 */
+			gpiod_set_value(host->slot_switch, slot->id);
 		host->current_slot = slot;
 	}
 
@@ -297,6 +307,9 @@ static void mmc_omap_release_slot(struct mmc_omap_slot *slot, int clk_enabled)
 static inline
 int mmc_omap_cover_is_open(struct mmc_omap_slot *slot)
 {
+	/* If we have a GPIO then use that */
+	if (slot->cover)
+		return gpiod_get_value(slot->cover);
 	if (slot->pdata->get_cover_state)
 		return slot->pdata->get_cover_state(mmc_dev(slot->mmc),
 						    slot->id);
@@ -1106,6 +1119,11 @@ static void mmc_omap_set_power(struct mmc_omap_slot *slot, int power_on,
 
 	host = slot->host;
 
+	if (slot->vsd)
+		gpiod_set_value(slot->vsd, power_on);
+	if (slot->vio)
+		gpiod_set_value(slot->vio, power_on);
+
 	if (slot->pdata->set_power != NULL)
 		slot->pdata->set_power(mmc_dev(slot->mmc), slot->id, power_on,
 					vdd);
@@ -1240,6 +1258,23 @@ static int mmc_omap_new_slot(struct mmc_omap_host *host, int id)
 	slot->power_mode = MMC_POWER_UNDEFINED;
 	slot->pdata = &host->pdata->slots[id];
 
+	/* Check for some optional GPIO controls */
+	slot->vsd = gpiod_get_index_optional(host->dev, "vsd",
+					     id, GPIOD_OUT_LOW);
+	if (IS_ERR(slot->vsd))
+		return dev_err_probe(host->dev, PTR_ERR(slot->vsd),
+				     "error looking up VSD GPIO\n");
+	slot->vio = gpiod_get_index_optional(host->dev, "vio",
+					     id, GPIOD_OUT_LOW);
+	if (IS_ERR(slot->vio))
+		return dev_err_probe(host->dev, PTR_ERR(slot->vio),
+				     "error looking up VIO GPIO\n");
+	slot->cover = gpiod_get_index_optional(host->dev, "cover",
+						id, GPIOD_IN);
+	if (IS_ERR(slot->cover))
+		return dev_err_probe(host->dev, PTR_ERR(slot->cover),
+				     "error looking up cover switch GPIO\n");
+
 	host->slots[id] = slot;
 
 	mmc->caps = 0;
@@ -1349,6 +1384,13 @@ static int mmc_omap_probe(struct platform_device *pdev)
 	if (IS_ERR(host->virt_base))
 		return PTR_ERR(host->virt_base);
 
+	host->slot_switch = gpiod_get_optional(host->dev, "switch",
+					       GPIOD_OUT_LOW);
+	if (IS_ERR(host->slot_switch))
+		return dev_err_probe(host->dev, PTR_ERR(host->slot_switch),
+				     "error looking up slot switch GPIO\n");
+
+
 	INIT_WORK(&host->slot_release_work, mmc_omap_slot_release_work);
 	INIT_WORK(&host->send_stop_work, mmc_omap_send_stop_work);
 
diff --git a/drivers/usb/musb/musb_core.c b/drivers/usb/musb/musb_core.c
index d162afbbe19f..ecbd3784bec3 100644
--- a/drivers/usb/musb/musb_core.c
+++ b/drivers/usb/musb/musb_core.c
@@ -2330,7 +2330,6 @@ musb_init_controller(struct device *dev, int nIrq, void __iomem *ctrl)
 
 	spin_lock_init(&musb->lock);
 	spin_lock_init(&musb->list_lock);
-	musb->board_set_power = plat->set_power;
 	musb->min_power = plat->min_power;
 	musb->ops = plat->platform_ops;
 	musb->port_mode = plat->mode;
diff --git a/drivers/usb/musb/musb_core.h b/drivers/usb/musb/musb_core.h
index b7588d11cfc5..91b5b6b66f96 100644
--- a/drivers/usb/musb/musb_core.h
+++ b/drivers/usb/musb/musb_core.h
@@ -352,8 +352,6 @@ struct musb {
 	u16 epmask;
 	u8 nr_endpoints;
 
-	int			(*board_set_power)(int state);
-
 	u8			min_power;	/* vbus for periph, in mA/2 */
 
 	enum musb_mode		port_mode;
diff --git a/drivers/usb/musb/tusb6010.c b/drivers/usb/musb/tusb6010.c
index a1f29dbc62e6..cbc707fe570f 100644
--- a/drivers/usb/musb/tusb6010.c
+++ b/drivers/usb/musb/tusb6010.c
@@ -11,6 +11,8 @@
  *   interface.
  */
 
+#include <linux/gpio/consumer.h>
+#include <linux/delay.h>
 #include <linux/module.h>
 #include <linux/kernel.h>
 #include <linux/errno.h>
@@ -30,6 +32,8 @@ struct tusb6010_glue {
 	struct device		*dev;
 	struct platform_device	*musb;
 	struct platform_device	*phy;
+	struct gpio_desc	*enable;
+	struct gpio_desc	*intpin;
 };
 
 static void tusb_musb_set_vbus(struct musb *musb, int is_on);
@@ -1021,16 +1025,29 @@ static void tusb_setup_cpu_interface(struct musb *musb)
 
 static int tusb_musb_start(struct musb *musb)
 {
+	struct tusb6010_glue *glue = dev_get_drvdata(musb->controller->parent);
 	void __iomem	*tbase = musb->ctrl_base;
-	int		ret = 0;
 	unsigned long	flags;
 	u32		reg;
+	int		i;
 
-	if (musb->board_set_power)
-		ret = musb->board_set_power(1);
-	if (ret != 0) {
-		printk(KERN_ERR "tusb: Cannot enable TUSB6010\n");
-		return ret;
+	/*
+	 * Enable or disable power to TUSB6010. When enabling, turn on 3.3 V and
+	 * 1.5 V voltage regulators of PM companion chip. Companion chip will then
+	 * provide then PGOOD signal to TUSB6010 which will release it from reset.
+	 */
+	gpiod_set_value(glue->enable, 1);
+	msleep(1);
+
+	/* Wait for 100ms until TUSB6010 pulls INT pin down */
+	i = 100;
+	while (i && gpiod_get_value(glue->intpin)) {
+		msleep(1);
+		i--;
+	}
+	if (!i) {
+		pr_err("tusb: Powerup respones failed\n");
+		return -ENODEV;
 	}
 
 	spin_lock_irqsave(&musb->lock, flags);
@@ -1083,8 +1100,8 @@ static int tusb_musb_start(struct musb *musb)
 err:
 	spin_unlock_irqrestore(&musb->lock, flags);
 
-	if (musb->board_set_power)
-		musb->board_set_power(0);
+	gpiod_set_value(glue->enable, 0);
+	msleep(10);
 
 	return -ENODEV;
 }
@@ -1158,11 +1175,13 @@ done:
 
 static int tusb_musb_exit(struct musb *musb)
 {
+	struct tusb6010_glue *glue = dev_get_drvdata(musb->controller->parent);
+
 	del_timer_sync(&musb->dev_timer);
 	the_musb = NULL;
 
-	if (musb->board_set_power)
-		musb->board_set_power(0);
+	gpiod_set_value(glue->enable, 0);
+	msleep(10);
 
 	iounmap(musb->sync_va);
 
@@ -1218,6 +1237,15 @@ static int tusb_probe(struct platform_device *pdev)
 
 	glue->dev			= &pdev->dev;
 
+	glue->enable = devm_gpiod_get(glue->dev, "enable", GPIOD_OUT_LOW);
+	if (IS_ERR(glue->enable))
+		return dev_err_probe(glue->dev, PTR_ERR(glue->enable),
+				     "could not obtain power on/off GPIO\n");
+	glue->intpin = devm_gpiod_get(glue->dev, "int", GPIOD_IN);
+	if (IS_ERR(glue->intpin))
+		return dev_err_probe(glue->dev, PTR_ERR(glue->intpin),
+				     "could not obtain INT GPIO\n");
+
 	pdata->platform_ops		= &tusb_ops;
 
 	usb_phy_generic_register();
@@ -1236,10 +1264,7 @@ static int tusb_probe(struct platform_device *pdev)
 	musb_resources[1].end = pdev->resource[1].end;
 	musb_resources[1].flags = pdev->resource[1].flags;
 
-	musb_resources[2].name = pdev->resource[2].name;
-	musb_resources[2].start = pdev->resource[2].start;
-	musb_resources[2].end = pdev->resource[2].end;
-	musb_resources[2].flags = pdev->resource[2].flags;
+	musb_resources[2] = DEFINE_RES_IRQ_NAMED(gpiod_to_irq(glue->intpin), "mc");
 
 	pinfo = tusb_dev_info;
 	pinfo.parent = &pdev->dev;
diff --git a/drivers/video/fbdev/omap/lcd_mipid.c b/drivers/video/fbdev/omap/lcd_mipid.c
index 03cff39d392d..e4a7f0b824ff 100644
--- a/drivers/video/fbdev/omap/lcd_mipid.c
+++ b/drivers/video/fbdev/omap/lcd_mipid.c
@@ -7,6 +7,7 @@
  */
 #include <linux/device.h>
 #include <linux/delay.h>
+#include <linux/gpio/consumer.h>
 #include <linux/slab.h>
 #include <linux/workqueue.h>
 #include <linux/spi/spi.h>
@@ -41,6 +42,7 @@ struct mipid_device {
 						   when we can issue the
 						   next sleep in/out command */
 	unsigned long	hw_guard_wait;		/* max guard time in jiffies */
+	struct gpio_desc	*reset;
 
 	struct omapfb_device	*fbdev;
 	struct spi_device	*spi;
@@ -556,6 +558,12 @@ static int mipid_spi_probe(struct spi_device *spi)
 		return -ENOMEM;
 	}
 
+	/* This will de-assert RESET if active */
+	md->reset = gpiod_get(&spi->dev, "reset", GPIOD_OUT_LOW);
+	if (IS_ERR(md->reset))
+		return dev_err_probe(&spi->dev, PTR_ERR(md->reset),
+				     "no reset GPIO line\n");
+
 	spi->mode = SPI_MODE_0;
 	md->spi = spi;
 	dev_set_drvdata(&spi->dev, md);
@@ -574,6 +582,8 @@ static void mipid_spi_remove(struct spi_device *spi)
 {
 	struct mipid_device *md = dev_get_drvdata(&spi->dev);
 
+	/* Asserts RESET */
+	gpiod_set_value(md->reset, 1);
 	mipid_disable(&md->panel);
 	kfree(md);
 }
diff --git a/include/linux/mfd/tps65010.h b/include/linux/mfd/tps65010.h
index a1fb9bc5311d..5edf1aef1118 100644
--- a/include/linux/mfd/tps65010.h
+++ b/include/linux/mfd/tps65010.h
@@ -28,6 +28,8 @@
 #ifndef __LINUX_I2C_TPS65010_H
 #define __LINUX_I2C_TPS65010_H
 
+struct gpio_chip;
+
 /*
  * ----------------------------------------------------------------------------
  * Registers, all 8 bits
@@ -176,12 +178,10 @@ struct i2c_client;
 
 /**
  * struct tps65010_board - packages GPIO and LED lines
- * @base: the GPIO number to assign to GPIO-1
  * @outmask: bit (N-1) is set to allow GPIO-N to be used as an
  *	(open drain) output
  * @setup: optional callback issued once the GPIOs are valid
  * @teardown: optional callback issued before the GPIOs are invalidated
- * @context: optional parameter passed to setup() and teardown()
  *
  * Board data may be used to package the GPIO (and LED) lines for use
  * in by the generic GPIO and LED frameworks.  The first four GPIOs
@@ -193,12 +193,9 @@ struct i2c_client;
  * devices in their initial states using these GPIOs.
  */
 struct tps65010_board {
-	int				base;
 	unsigned			outmask;
-
-	int		(*setup)(struct i2c_client *client, void *context);
-	int		(*teardown)(struct i2c_client *client, void *context);
-	void		*context;
+	int		(*setup)(struct i2c_client *client, struct gpio_chip *gc);
+	void		(*teardown)(struct i2c_client *client, struct gpio_chip *gc);
 };
 
 #endif /*  __LINUX_I2C_TPS65010_H */
diff --git a/include/linux/mfd/twl.h b/include/linux/mfd/twl.h
index 6e3d99b7a0ee..c062d91a67d9 100644
--- a/include/linux/mfd/twl.h
+++ b/include/linux/mfd/twl.h
@@ -593,9 +593,6 @@ struct twl4030_gpio_platform_data {
 	 */
 	u32		pullups;
 	u32		pulldowns;
-
-	int		(*setup)(struct device *dev,
-				unsigned gpio, unsigned ngpio);
 };
 
 struct twl4030_madc_platform_data {
diff --git a/include/linux/platform_data/lcd-mipid.h b/include/linux/platform_data/lcd-mipid.h
index 63f05eb23827..4927cfc5158c 100644
--- a/include/linux/platform_data/lcd-mipid.h
+++ b/include/linux/platform_data/lcd-mipid.h
@@ -15,10 +15,8 @@ enum mipid_test_result {
 #ifdef __KERNEL__
 
 struct mipid_platform_data {
-	int	nreset_gpio;
 	int	data_lines;
 
-	void	(*shutdown)(struct mipid_platform_data *pdata);
 	void	(*set_bklight_level)(struct mipid_platform_data *pdata,
 				     int level);
 	int	(*get_bklight_level)(struct mipid_platform_data *pdata);
diff --git a/include/linux/platform_data/mmc-omap.h b/include/linux/platform_data/mmc-omap.h
index 91051e9907f3..054d0c3c5ec5 100644
--- a/include/linux/platform_data/mmc-omap.h
+++ b/include/linux/platform_data/mmc-omap.h
@@ -20,8 +20,6 @@ struct omap_mmc_platform_data {
 	 * maximum frequency on the MMC bus */
 	unsigned int max_freq;
 
-	/* switch the bus to a new slot */
-	int (*switch_slot)(struct device *dev, int slot);
 	/* initialize board-specific MMC functionality, can be NULL if
 	 * not supported */
 	int (*init)(struct device *dev);
diff --git a/include/linux/spi/ads7846.h b/include/linux/spi/ads7846.h
index d424c1aadf38..a04c1c34c344 100644
--- a/include/linux/spi/ads7846.h
+++ b/include/linux/spi/ads7846.h
@@ -35,8 +35,6 @@ struct ads7846_platform_data {
 	u16	debounce_tol;		/* tolerance used for filtering */
 	u16	debounce_rep;		/* additional consecutive good readings
 					 * required after the first two */
-	int	gpio_pendown;		/* the GPIO used to decide the pendown
-					 * state if get_pendown_state == NULL */
 	int	gpio_pendown_debounce;	/* platform specific debounce time for
 					 * the gpio_pendown */
 	int	(*get_pendown_state)(void);
diff --git a/include/linux/usb/musb.h b/include/linux/usb/musb.h
index e4a3ad3c800f..3963e55e88a3 100644
--- a/include/linux/usb/musb.h
+++ b/include/linux/usb/musb.h
@@ -99,9 +99,6 @@ struct musb_hdrc_platform_data {
 	/* (HOST or OTG) program PHY for external Vbus */
 	unsigned	extvbus:1;
 
-	/* Power the device on or off */
-	int		(*set_power)(int state);
-
 	/* MUSB configuration-specific details */
 	const struct musb_hdrc_config *config;
 
@@ -135,14 +132,4 @@ static inline int musb_mailbox(enum musb_vbus_id_status status)
 #define	TUSB6010_REFCLK_24	41667	/* psec/clk @ 24.0 MHz XI */
 #define	TUSB6010_REFCLK_19	52083	/* psec/clk @ 19.2 MHz CLKIN */
 
-#ifdef	CONFIG_ARCH_OMAP2
-
-extern int __init tusb6010_setup_interface(
-		struct musb_hdrc_platform_data *data,
-		unsigned ps_refclk, unsigned waitpin,
-		unsigned async_cs, unsigned sync_cs,
-		unsigned irq, unsigned dmachan);
-
-#endif	/* OMAP2 */
-
 #endif /* __LINUX_USB_MUSB_H */