Merge branch 'for-4.9/drivers' into for-next

16 files changed, 1158 insertions, 145 deletions

diff --git a/Documentation/devicetree/bindings/pwm/pwm-meson.txt b/Documentation/devicetree/bindings/pwm/pwm-meson.txt
new file mode 100644
index 000000000000..5376a4468cb6
--- /dev/null
+++ b/Documentation/devicetree/bindings/pwm/pwm-meson.txt
@@ -0,0 +1,23 @@
+Amlogic Meson PWM Controller
+============================
+
+Required properties:
+- compatible: Shall contain "amlogic,meson8b-pwm" or "amlogic,meson-gxbb-pwm".
+- #pwm-cells: Should be 3. See pwm.txt in this directory for a description of
+  the cells format.
+
+Optional properties:
+- clocks: Could contain one or two parents clocks phandle for each of the two
+  PWM channels.
+- clock-names: Could contain at least the "clkin0" and/or "clkin1" names.
+
+Example:
+
+	pwm_ab: pwm@8550 {
+		compatible = "amlogic,meson-gxbb-pwm";
+		reg = <0x0 0x08550 0x0 0x10>;
+		#pwm-cells = <3>;
+		status = "disabled";
+		clocks = <&xtal>, <&xtal>;
+		clock-names = "clkin0", "clkin1";
+	}
diff --git a/Documentation/devicetree/bindings/pwm/pwm-mtk-disp.txt b/Documentation/devicetree/bindings/pwm/pwm-mtk-disp.txt
index f8f59baf6b67..6f8af2bcc7b7 100644
--- a/Documentation/devicetree/bindings/pwm/pwm-mtk-disp.txt
+++ b/Documentation/devicetree/bindings/pwm/pwm-mtk-disp.txt
@@ -2,8 +2,9 @@ MediaTek display PWM controller
 
 Required properties:
  - compatible: should be "mediatek,<name>-disp-pwm":
-   - "mediatek,mt8173-disp-pwm": found on mt8173 SoC.
+   - "mediatek,mt2701-disp-pwm": found on mt2701 SoC.
    - "mediatek,mt6595-disp-pwm": found on mt6595 SoC.
+   - "mediatek,mt8173-disp-pwm": found on mt8173 SoC.
  - reg: physical base address and length of the controller's registers.
  - #pwm-cells: must be 2. See pwm.txt in this directory for a description of
    the cell format.
diff --git a/Documentation/devicetree/bindings/pwm/pwm-st.txt b/Documentation/devicetree/bindings/pwm/pwm-st.txt
index 84d2fb807d3c..19fce774cafa 100644
--- a/Documentation/devicetree/bindings/pwm/pwm-st.txt
+++ b/Documentation/devicetree/bindings/pwm/pwm-st.txt
@@ -13,13 +13,14 @@ Required parameters:
 - pinctrl-0: 		List of phandles pointing to pin configuration nodes
 			for PWM module.
 			For Pinctrl properties, please refer to [1].
-- clock-names: 		Set to "pwm".
+- clock-names: 		Valid entries are "pwm" and/or "capture".
 - clocks: 		phandle of the clock used by the PWM module.
 			For Clk properties, please refer to [2].
+- interrupts:		IRQ for the Capture device
 
 Optional properties:
-- st,pwm-num-chan:	Number of available channels. If not passed, the driver
-			will consider single channel by default.
+- st,pwm-num-chan:	Number of available PWM channels.  Default is 0.
+- st,capture-num-chan:	Number of available Capture channels.  Default is 0.
 
 [1] Documentation/devicetree/bindings/pinctrl/pinctrl-bindings.txt
 [2] Documentation/devicetree/bindings/clock/clock-bindings.txt
@@ -38,4 +39,5 @@ pwm1: pwm@fe510000 {
 	clocks = <&clk_sysin>;
 	clock-names = "pwm";
 	st,pwm-num-chan = <4>;
+	st,capture-num-chan = <2>;
 };
diff --git a/Documentation/devicetree/bindings/pwm/pwm-sun4i.txt b/Documentation/devicetree/bindings/pwm/pwm-sun4i.txt
index cf6068b8e974..f1cbeefb3087 100644
--- a/Documentation/devicetree/bindings/pwm/pwm-sun4i.txt
+++ b/Documentation/devicetree/bindings/pwm/pwm-sun4i.txt
@@ -6,6 +6,7 @@ Required properties:
     - "allwinner,sun5i-a10s-pwm"
     - "allwinner,sun5i-a13-pwm"
     - "allwinner,sun7i-a20-pwm"
+    - "allwinner,sun8i-h3-pwm"
   - reg: physical base address and length of the controller's registers
   - #pwm-cells: should be 3. See pwm.txt in this directory for a description of
     the cells format.
diff --git a/drivers/pwm/Kconfig b/drivers/pwm/Kconfig
index 80a566a00d04..bf0128899c09 100644
--- a/drivers/pwm/Kconfig
+++ b/drivers/pwm/Kconfig
@@ -262,6 +262,15 @@ config PWM_LPSS_PLATFORM
 	  To compile this driver as a module, choose M here: the module
 	  will be called pwm-lpss-platform.
 
+config PWM_MESON
+	tristate "Amlogic Meson PWM driver"
+	depends on ARCH_MESON
+	help
+	  The platform driver for Amlogic Meson PWM controller.
+
+	  To compile this driver as a module, choose M here: the module
+	  will be called pwm-meson.
+
 config PWM_MTK_DISP
 	tristate "MediaTek display PWM driver"
 	depends on ARCH_MEDIATEK || COMPILE_TEST
diff --git a/drivers/pwm/Makefile b/drivers/pwm/Makefile
index feef1dd29f73..1194c54efcc2 100644
--- a/drivers/pwm/Makefile
+++ b/drivers/pwm/Makefile
@@ -24,6 +24,7 @@ obj-$(CONFIG_PWM_LPC32XX)	+= pwm-lpc32xx.o
 obj-$(CONFIG_PWM_LPSS)		+= pwm-lpss.o
 obj-$(CONFIG_PWM_LPSS_PCI)	+= pwm-lpss-pci.o
 obj-$(CONFIG_PWM_LPSS_PLATFORM)	+= pwm-lpss-platform.o
+obj-$(CONFIG_PWM_MESON)		+= pwm-meson.o
 obj-$(CONFIG_PWM_MTK_DISP)	+= pwm-mtk-disp.o
 obj-$(CONFIG_PWM_MXS)		+= pwm-mxs.o
 obj-$(CONFIG_PWM_OMAP_DMTIMER)	+= pwm-omap-dmtimer.o
diff --git a/drivers/pwm/pwm-berlin.c b/drivers/pwm/pwm-berlin.c
index 65108129d505..01339c152ab0 100644
--- a/drivers/pwm/pwm-berlin.c
+++ b/drivers/pwm/pwm-berlin.c
@@ -16,6 +16,7 @@
 #include <linux/module.h>
 #include <linux/platform_device.h>
 #include <linux/pwm.h>
+#include <linux/slab.h>
 
 #define BERLIN_PWM_EN			0x0
 #define  BERLIN_PWM_ENABLE		BIT(0)
@@ -27,6 +28,13 @@
 #define BERLIN_PWM_TCNT			0xc
 #define  BERLIN_PWM_MAX_TCNT		65535
 
+struct berlin_pwm_channel {
+	u32 enable;
+	u32 ctrl;
+	u32 duty;
+	u32 tcnt;
+};
+
 struct berlin_pwm_chip {
 	struct pwm_chip chip;
 	struct clk *clk;
@@ -55,6 +63,25 @@ static inline void berlin_pwm_writel(struct berlin_pwm_chip *chip,
 	writel_relaxed(value, chip->base + channel * 0x10 + offset);
 }
 
+static int berlin_pwm_request(struct pwm_chip *chip, struct pwm_device *pwm)
+{
+	struct berlin_pwm_channel *channel;
+
+	channel = kzalloc(sizeof(*channel), GFP_KERNEL);
+	if (!channel)
+		return -ENOMEM;
+
+	return pwm_set_chip_data(pwm, channel);
+}
+
+static void berlin_pwm_free(struct pwm_chip *chip, struct pwm_device *pwm)
+{
+	struct berlin_pwm_channel *channel = pwm_get_chip_data(pwm);
+
+	pwm_set_chip_data(pwm, NULL);
+	kfree(channel);
+}
+
 static int berlin_pwm_config(struct pwm_chip *chip, struct pwm_device *pwm_dev,
 			     int duty_ns, int period_ns)
 {
@@ -137,6 +164,8 @@ static void berlin_pwm_disable(struct pwm_chip *chip,
 }
 
 static const struct pwm_ops berlin_pwm_ops = {
+	.request = berlin_pwm_request,
+	.free = berlin_pwm_free,
 	.config = berlin_pwm_config,
 	.set_polarity = berlin_pwm_set_polarity,
 	.enable = berlin_pwm_enable,
@@ -204,12 +233,67 @@ static int berlin_pwm_remove(struct platform_device *pdev)
 	return ret;
 }
 
+#ifdef CONFIG_PM_SLEEP
+static int berlin_pwm_suspend(struct device *dev)
+{
+	struct berlin_pwm_chip *pwm = dev_get_drvdata(dev);
+	unsigned int i;
+
+	for (i = 0; i < pwm->chip.npwm; i++) {
+		struct berlin_pwm_channel *channel;
+
+		channel = pwm_get_chip_data(&pwm->chip.pwms[i]);
+		if (!channel)
+			continue;
+
+		channel->enable = berlin_pwm_readl(pwm, i, BERLIN_PWM_ENABLE);
+		channel->ctrl = berlin_pwm_readl(pwm, i, BERLIN_PWM_CONTROL);
+		channel->duty = berlin_pwm_readl(pwm, i, BERLIN_PWM_DUTY);
+		channel->tcnt = berlin_pwm_readl(pwm, i, BERLIN_PWM_TCNT);
+	}
+
+	clk_disable_unprepare(pwm->clk);
+
+	return 0;
+}
+
+static int berlin_pwm_resume(struct device *dev)
+{
+	struct berlin_pwm_chip *pwm = dev_get_drvdata(dev);
+	unsigned int i;
+	int ret;
+
+	ret = clk_prepare_enable(pwm->clk);
+	if (ret)
+		return ret;
+
+	for (i = 0; i < pwm->chip.npwm; i++) {
+		struct berlin_pwm_channel *channel;
+
+		channel = pwm_get_chip_data(&pwm->chip.pwms[i]);
+		if (!channel)
+			continue;
+
+		berlin_pwm_writel(pwm, i, channel->ctrl, BERLIN_PWM_CONTROL);
+		berlin_pwm_writel(pwm, i, channel->duty, BERLIN_PWM_DUTY);
+		berlin_pwm_writel(pwm, i, channel->tcnt, BERLIN_PWM_TCNT);
+		berlin_pwm_writel(pwm, i, channel->enable, BERLIN_PWM_ENABLE);
+	}
+
+	return 0;
+}
+#endif
+
+static SIMPLE_DEV_PM_OPS(berlin_pwm_pm_ops, berlin_pwm_suspend,
+			 berlin_pwm_resume);
+
 static struct platform_driver berlin_pwm_driver = {
 	.probe = berlin_pwm_probe,
 	.remove = berlin_pwm_remove,
 	.driver = {
 		.name = "berlin-pwm",
 		.of_match_table = berlin_pwm_match,
+		.pm = &berlin_pwm_pm_ops,
 	},
 };
 module_platform_driver(berlin_pwm_driver);
diff --git a/drivers/pwm/pwm-cros-ec.c b/drivers/pwm/pwm-cros-ec.c
index 99b9acc1a420..f6ca4e8c6253 100644
--- a/drivers/pwm/pwm-cros-ec.c
+++ b/drivers/pwm/pwm-cros-ec.c
@@ -38,7 +38,7 @@ static int cros_ec_pwm_set_duty(struct cros_ec_device *ec, u8 index, u16 duty)
 	struct {
 		struct cros_ec_command msg;
 		struct ec_params_pwm_set_duty params;
-	} buf;
+	} __packed buf;
 	struct ec_params_pwm_set_duty *params = &buf.params;
 	struct cros_ec_command *msg = &buf.msg;
 
@@ -65,7 +65,7 @@ static int __cros_ec_pwm_get_duty(struct cros_ec_device *ec, u8 index,
 			struct ec_params_pwm_get_duty params;
 			struct ec_response_pwm_get_duty resp;
 		};
-	} buf;
+	} __packed buf;
 	struct ec_params_pwm_get_duty *params = &buf.params;
 	struct ec_response_pwm_get_duty *resp = &buf.resp;
 	struct cros_ec_command *msg = &buf.msg;
diff --git a/drivers/pwm/pwm-lpc18xx-sct.c b/drivers/pwm/pwm-lpc18xx-sct.c
index 19dc64cab2f0..d7f5f7de030d 100644
--- a/drivers/pwm/pwm-lpc18xx-sct.c
+++ b/drivers/pwm/pwm-lpc18xx-sct.c
@@ -413,14 +413,18 @@ static int lpc18xx_pwm_probe(struct platform_device *pdev)
 	}
 
 	for (i = 0; i < lpc18xx_pwm->chip.npwm; i++) {
+		struct lpc18xx_pwm_data *data;
+
 		pwm = &lpc18xx_pwm->chip.pwms[i];
-		pwm->chip_data = devm_kzalloc(lpc18xx_pwm->dev,
-					      sizeof(struct lpc18xx_pwm_data),
-					      GFP_KERNEL);
-		if (!pwm->chip_data) {
+
+		data = devm_kzalloc(lpc18xx_pwm->dev, sizeof(*data),
+				    GFP_KERNEL);
+		if (!data) {
 			ret = -ENOMEM;
 			goto remove_pwmchip;
 		}
+
+		pwm_set_chip_data(pwm, data);
 	}
 
 	platform_set_drvdata(pdev, lpc18xx_pwm);
diff --git a/drivers/pwm/pwm-meson.c b/drivers/pwm/pwm-meson.c
new file mode 100644
index 000000000000..381871b2bb46
--- /dev/null
+++ b/drivers/pwm/pwm-meson.c
@@ -0,0 +1,529 @@
+/*
+ * This file is provided under a dual BSD/GPLv2 license.  When using or
+ * redistributing this file, you may do so under either license.
+ *
+ * GPL LICENSE SUMMARY
+ *
+ * Copyright (c) 2016 BayLibre, SAS.
+ * Author: Neil Armstrong <narmstrong@baylibre.com>
+ * Copyright (C) 2014 Amlogic, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of version 2 of the GNU General Public License as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, see <http://www.gnu.org/licenses/>.
+ * The full GNU General Public License is included in this distribution
+ * in the file called COPYING.
+ *
+ * BSD LICENSE
+ *
+ * Copyright (c) 2016 BayLibre, SAS.
+ * Author: Neil Armstrong <narmstrong@baylibre.com>
+ * Copyright (C) 2014 Amlogic, Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ *   * Redistributions of source code must retain the above copyright
+ *     notice, this list of conditions and the following disclaimer.
+ *   * Redistributions in binary form must reproduce the above copyright
+ *     notice, this list of conditions and the following disclaimer in
+ *     the documentation and/or other materials provided with the
+ *     distribution.
+ *   * Neither the name of Intel Corporation nor the names of its
+ *     contributors may be used to endorse or promote products derived
+ *     from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+ * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+ * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+#include <linux/clk.h>
+#include <linux/clk-provider.h>
+#include <linux/err.h>
+#include <linux/io.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/of_device.h>
+#include <linux/platform_device.h>
+#include <linux/pwm.h>
+#include <linux/slab.h>
+#include <linux/spinlock.h>
+
+#define REG_PWM_A		0x0
+#define REG_PWM_B		0x4
+#define PWM_HIGH_SHIFT		16
+
+#define REG_MISC_AB		0x8
+#define MISC_B_CLK_EN		BIT(23)
+#define MISC_A_CLK_EN		BIT(15)
+#define MISC_CLK_DIV_MASK	0x7f
+#define MISC_B_CLK_DIV_SHIFT	16
+#define MISC_A_CLK_DIV_SHIFT	8
+#define MISC_B_CLK_SEL_SHIFT	6
+#define MISC_A_CLK_SEL_SHIFT	4
+#define MISC_CLK_SEL_WIDTH	2
+#define MISC_B_EN		BIT(1)
+#define MISC_A_EN		BIT(0)
+
+static const unsigned int mux_reg_shifts[] = {
+	MISC_A_CLK_SEL_SHIFT,
+	MISC_B_CLK_SEL_SHIFT
+};
+
+struct meson_pwm_channel {
+	unsigned int hi;
+	unsigned int lo;
+	u8 pre_div;
+
+	struct pwm_state state;
+
+	struct clk *clk_parent;
+	struct clk_mux mux;
+	struct clk *clk;
+};
+
+struct meson_pwm_data {
+	const char * const *parent_names;
+};
+
+struct meson_pwm {
+	struct pwm_chip chip;
+	const struct meson_pwm_data *data;
+	void __iomem *base;
+	u8 inverter_mask;
+	spinlock_t lock;
+};
+
+static inline struct meson_pwm *to_meson_pwm(struct pwm_chip *chip)
+{
+	return container_of(chip, struct meson_pwm, chip);
+}
+
+static int meson_pwm_request(struct pwm_chip *chip, struct pwm_device *pwm)
+{
+	struct meson_pwm_channel *channel = pwm_get_chip_data(pwm);
+	struct device *dev = chip->dev;
+	int err;
+
+	if (!channel)
+		return -ENODEV;
+
+	if (channel->clk_parent) {
+		err = clk_set_parent(channel->clk, channel->clk_parent);
+		if (err < 0) {
+			dev_err(dev, "failed to set parent %s for %s: %d\n",
+				__clk_get_name(channel->clk_parent),
+				__clk_get_name(channel->clk), err);
+				return err;
+		}
+	}
+
+	err = clk_prepare_enable(channel->clk);
+	if (err < 0) {
+		dev_err(dev, "failed to enable clock %s: %d\n",
+			__clk_get_name(channel->clk), err);
+		return err;
+	}
+
+	chip->ops->get_state(chip, pwm, &channel->state);
+
+	return 0;
+}
+
+static void meson_pwm_free(struct pwm_chip *chip, struct pwm_device *pwm)
+{
+	struct meson_pwm_channel *channel = pwm_get_chip_data(pwm);
+
+	if (channel)
+		clk_disable_unprepare(channel->clk);
+}
+
+static int meson_pwm_calc(struct meson_pwm *meson,
+			  struct meson_pwm_channel *channel, unsigned int id,
+			  unsigned int duty, unsigned int period)
+{
+	unsigned int pre_div, cnt, duty_cnt;
+	unsigned long fin_freq = -1, fin_ns;
+
+	if (~(meson->inverter_mask >> id) & 0x1)
+		duty = period - duty;
+
+	if (period == channel->state.period &&
+	    duty == channel->state.duty_cycle)
+		return 0;
+
+	fin_freq = clk_get_rate(channel->clk);
+	if (fin_freq == 0) {
+		dev_err(meson->chip.dev, "invalid source clock frequency\n");
+		return -EINVAL;
+	}
+
+	dev_dbg(meson->chip.dev, "fin_freq: %lu Hz\n", fin_freq);
+	fin_ns = NSEC_PER_SEC / fin_freq;
+
+	/* Calc pre_div with the period */
+	for (pre_div = 0; pre_div < MISC_CLK_DIV_MASK; pre_div++) {
+		cnt = DIV_ROUND_CLOSEST(period, fin_ns * (pre_div + 1));
+		dev_dbg(meson->chip.dev, "fin_ns=%lu pre_div=%u cnt=%u\n",
+			fin_ns, pre_div, cnt);
+		if (cnt <= 0xffff)
+			break;
+	}
+
+	if (pre_div == MISC_CLK_DIV_MASK) {
+		dev_err(meson->chip.dev, "unable to get period pre_div\n");
+		return -EINVAL;
+	}
+
+	dev_dbg(meson->chip.dev, "period=%u pre_div=%u cnt=%u\n", period,
+		pre_div, cnt);
+
+	if (duty == period) {
+		channel->pre_div = pre_div;
+		channel->hi = cnt;
+		channel->lo = 0;
+	} else if (duty == 0) {
+		channel->pre_div = pre_div;
+		channel->hi = 0;
+		channel->lo = cnt;
+	} else {
+		/* Then check is we can have the duty with the same pre_div */
+		duty_cnt = DIV_ROUND_CLOSEST(duty, fin_ns * (pre_div + 1));
+		if (duty_cnt > 0xffff) {
+			dev_err(meson->chip.dev, "unable to get duty cycle\n");
+			return -EINVAL;
+		}
+
+		dev_dbg(meson->chip.dev, "duty=%u pre_div=%u duty_cnt=%u\n",
+			duty, pre_div, duty_cnt);
+
+		channel->pre_div = pre_div;
+		channel->hi = duty_cnt;
+		channel->lo = cnt - duty_cnt;
+	}
+
+	return 0;
+}
+
+static void meson_pwm_enable(struct meson_pwm *meson,
+			     struct meson_pwm_channel *channel,
+			     unsigned int id)
+{
+	u32 value, clk_shift, clk_enable, enable;
+	unsigned int offset;
+
+	switch (id) {
+	case 0:
+		clk_shift = MISC_A_CLK_DIV_SHIFT;
+		clk_enable = MISC_A_CLK_EN;
+		enable = MISC_A_EN;
+		offset = REG_PWM_A;
+		break;
+
+	case 1:
+		clk_shift = MISC_B_CLK_DIV_SHIFT;
+		clk_enable = MISC_B_CLK_EN;
+		enable = MISC_B_EN;
+		offset = REG_PWM_B;
+		break;
+
+	default:
+		return;
+	}
+
+	value = readl(meson->base + REG_MISC_AB);
+	value &= ~(MISC_CLK_DIV_MASK << clk_shift);
+	value |= channel->pre_div << clk_shift;
+	value |= clk_enable;
+	writel(value, meson->base + REG_MISC_AB);
+
+	value = (channel->hi << PWM_HIGH_SHIFT) | channel->lo;
+	writel(value, meson->base + offset);
+
+	value = readl(meson->base + REG_MISC_AB);
+	value |= enable;
+	writel(value, meson->base + REG_MISC_AB);
+}
+
+static void meson_pwm_disable(struct meson_pwm *meson, unsigned int id)
+{
+	u32 value, enable;
+
+	switch (id) {
+	case 0:
+		enable = MISC_A_EN;
+		break;
+
+	case 1:
+		enable = MISC_B_EN;
+		break;
+
+	default:
+		return;
+	}
+
+	value = readl(meson->base + REG_MISC_AB);
+	value &= ~enable;
+	writel(value, meson->base + REG_MISC_AB);
+}
+
+static int meson_pwm_apply(struct pwm_chip *chip, struct pwm_device *pwm,
+			   struct pwm_state *state)
+{
+	struct meson_pwm_channel *channel = pwm_get_chip_data(pwm);
+	struct meson_pwm *meson = to_meson_pwm(chip);
+	unsigned long flags;
+	int err = 0;
+
+	if (!state)
+		return -EINVAL;
+
+	spin_lock_irqsave(&meson->lock, flags);
+
+	if (!state->enabled) {
+		meson_pwm_disable(meson, pwm->hwpwm);
+		channel->state.enabled = false;
+
+		goto unlock;
+	}
+
+	if (state->period != channel->state.period ||
+	    state->duty_cycle != channel->state.duty_cycle ||
+	    state->polarity != channel->state.polarity) {
+		if (channel->state.enabled) {
+			meson_pwm_disable(meson, pwm->hwpwm);
+			channel->state.enabled = false;
+		}
+
+		if (state->polarity != channel->state.polarity) {
+			if (state->polarity == PWM_POLARITY_NORMAL)
+				meson->inverter_mask |= BIT(pwm->hwpwm);
+			else
+				meson->inverter_mask &= ~BIT(pwm->hwpwm);
+		}
+
+		err = meson_pwm_calc(meson, channel, pwm->hwpwm,
+				     state->duty_cycle, state->period);
+		if (err < 0)
+			goto unlock;
+
+		channel->state.polarity = state->polarity;
+		channel->state.period = state->period;
+		channel->state.duty_cycle = state->duty_cycle;
+	}
+
+	if (state->enabled && !channel->state.enabled) {
+		meson_pwm_enable(meson, channel, pwm->hwpwm);
+		channel->state.enabled = true;
+	}
+
+unlock:
+	spin_unlock_irqrestore(&meson->lock, flags);
+	return err;
+}
+
+static void meson_pwm_get_state(struct pwm_chip *chip, struct pwm_device *pwm,
+				struct pwm_state *state)
+{
+	struct meson_pwm *meson = to_meson_pwm(chip);
+	u32 value, mask;
+
+	if (!state)
+		return;
+
+	switch (pwm->hwpwm) {
+	case 0:
+		mask = MISC_A_EN;
+		break;
+
+	case 1:
+		mask = MISC_B_EN;
+		break;
+
+	default:
+		return;
+	}
+
+	value = readl(meson->base + REG_MISC_AB);
+	state->enabled = (value & mask) != 0;
+}
+
+static const struct pwm_ops meson_pwm_ops = {
+	.request = meson_pwm_request,
+	.free = meson_pwm_free,
+	.apply = meson_pwm_apply,
+	.get_state = meson_pwm_get_state,
+	.owner = THIS_MODULE,
+};
+
+static const char * const pwm_meson8b_parent_names[] = {
+	"xtal", "vid_pll", "fclk_div4", "fclk_div3"
+};
+
+static const struct meson_pwm_data pwm_meson8b_data = {
+	.parent_names = pwm_meson8b_parent_names,
+};
+
+static const char * const pwm_gxbb_parent_names[] = {
+	"xtal", "hdmi_pll", "fclk_div4", "fclk_div3"
+};
+
+static const struct meson_pwm_data pwm_gxbb_data = {
+	.parent_names = pwm_gxbb_parent_names,
+};
+
+static const struct of_device_id meson_pwm_matches[] = {
+	{ .compatible = "amlogic,meson8b-pwm", .data = &pwm_meson8b_data },
+	{ .compatible = "amlogic,meson-gxbb-pwm", .data = &pwm_gxbb_data },
+	{},
+};
+MODULE_DEVICE_TABLE(of, meson_pwm_matches);
+
+static int meson_pwm_init_channels(struct meson_pwm *meson,
+				   struct meson_pwm_channel *channels)
+{
+	struct device *dev = meson->chip.dev;
+	struct device_node *np = dev->of_node;
+	struct clk_init_data init;
+	unsigned int i;
+	char name[255];
+	int err;
+
+	for (i = 0; i < meson->chip.npwm; i++) {
+		struct meson_pwm_channel *channel = &channels[i];
+
+		snprintf(name, sizeof(name), "%s#mux%u", np->full_name, i);
+
+		init.name = name;
+		init.ops = &clk_mux_ops;
+		init.flags = CLK_IS_BASIC;
+		init.parent_names = meson->data->parent_names;
+		init.num_parents = 1 << MISC_CLK_SEL_WIDTH;
+
+		channel->mux.reg = meson->base + REG_MISC_AB;
+		channel->mux.shift = mux_reg_shifts[i];
+		channel->mux.mask = BIT(MISC_CLK_SEL_WIDTH) - 1;
+		channel->mux.flags = 0;
+		channel->mux.lock = &meson->lock;
+		channel->mux.table = NULL;
+		channel->mux.hw.init = &init;
+
+		channel->clk = devm_clk_register(dev, &channel->mux.hw);
+		if (IS_ERR(channel->clk)) {
+			err = PTR_ERR(channel->clk);
+			dev_err(dev, "failed to register %s: %d\n", name, err);
+			return err;
+		}
+
+		snprintf(name, sizeof(name), "clkin%u", i);
+
+		channel->clk_parent = devm_clk_get(dev, name);
+		if (IS_ERR(channel->clk_parent)) {
+			err = PTR_ERR(channel->clk_parent);
+			if (err == -EPROBE_DEFER)
+				return err;
+
+			channel->clk_parent = NULL;
+		}
+	}
+
+	return 0;
+}
+
+static void meson_pwm_add_channels(struct meson_pwm *meson,
+				   struct meson_pwm_channel *channels)
+{
+	unsigned int i;
+
+	for (i = 0; i < meson->chip.npwm; i++)
+		pwm_set_chip_data(&meson->chip.pwms[i], &channels[i]);
+}
+
+static int meson_pwm_probe(struct platform_device *pdev)
+{
+	struct meson_pwm_channel *channels;
+	struct meson_pwm *meson;
+	struct resource *regs;
+	int err;
+
+	meson = devm_kzalloc(&pdev->dev, sizeof(*meson), GFP_KERNEL);
+	if (!meson)
+		return -ENOMEM;
+
+	regs = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	meson->base = devm_ioremap_resource(&pdev->dev, regs);
+	if (IS_ERR(meson->base))
+		return PTR_ERR(meson->base);
+
+	meson->chip.dev = &pdev->dev;
+	meson->chip.ops = &meson_pwm_ops;
+	meson->chip.base = -1;
+	meson->chip.npwm = 2;
+	meson->chip.of_xlate = of_pwm_xlate_with_flags;
+	meson->chip.of_pwm_n_cells = 3;
+
+	meson->data = of_device_get_match_data(&pdev->dev);
+	meson->inverter_mask = BIT(meson->chip.npwm) - 1;
+
+	channels = devm_kcalloc(&pdev->dev, meson->chip.npwm, sizeof(*meson),
+				GFP_KERNEL);
+	if (!channels)
+		return -ENOMEM;
+
+	err = meson_pwm_init_channels(meson, channels);
+	if (err < 0)
+		return err;
+
+	err = pwmchip_add(&meson->chip);
+	if (err < 0) {
+		dev_err(&pdev->dev, "failed to register PWM chip: %d\n", err);
+		return err;
+	}
+
+	meson_pwm_add_channels(meson, channels);
+
+	platform_set_drvdata(pdev, meson);
+
+	return 0;
+}
+
+static int meson_pwm_remove(struct platform_device *pdev)
+{
+	struct meson_pwm *meson = platform_get_drvdata(pdev);
+
+	return pwmchip_remove(&meson->chip);
+}
+
+static struct platform_driver meson_pwm_driver = {
+	.driver = {
+		.name = "meson-pwm",
+		.of_match_table = meson_pwm_matches,
+	},
+	.probe = meson_pwm_probe,
+	.remove = meson_pwm_remove,
+};
+module_platform_driver(meson_pwm_driver);
+
+MODULE_ALIAS("platform:meson-pwm");
+MODULE_DESCRIPTION("Amlogic Meson PWM Generator driver");
+MODULE_AUTHOR("Neil Armstrong <narmstrong@baylibre.com>");
+MODULE_LICENSE("Dual BSD/GPL");
diff --git a/drivers/pwm/pwm-mtk-disp.c b/drivers/pwm/pwm-mtk-disp.c
index 0ad3385298c0..893940d45f0d 100644
--- a/drivers/pwm/pwm-mtk-disp.c
+++ b/drivers/pwm/pwm-mtk-disp.c
@@ -18,30 +18,40 @@
 #include <linux/io.h>
 #include <linux/module.h>
 #include <linux/of.h>
+#include <linux/of_device.h>
 #include <linux/platform_device.h>
 #include <linux/pwm.h>
 #include <linux/slab.h>
 
 #define DISP_PWM_EN		0x00
-#define PWM_ENABLE_MASK		BIT(0)
 
-#define DISP_PWM_COMMIT		0x08
-#define PWM_COMMIT_MASK		BIT(0)
-
-#define DISP_PWM_CON_0		0x10
 #define PWM_CLKDIV_SHIFT	16
 #define PWM_CLKDIV_MAX		0x3ff
 #define PWM_CLKDIV_MASK		(PWM_CLKDIV_MAX << PWM_CLKDIV_SHIFT)
 
-#define DISP_PWM_CON_1		0x14
 #define PWM_PERIOD_BIT_WIDTH	12
 #define PWM_PERIOD_MASK		((1 << PWM_PERIOD_BIT_WIDTH) - 1)
 
 #define PWM_HIGH_WIDTH_SHIFT	16
 #define PWM_HIGH_WIDTH_MASK	(0x1fff << PWM_HIGH_WIDTH_SHIFT)
 
+struct mtk_pwm_data {
+	u32 enable_mask;
+	unsigned int con0;
+	u32 con0_sel;
+	unsigned int con1;
+
+	bool has_commit;
+	unsigned int commit;
+	unsigned int commit_mask;
+
+	unsigned int bls_debug;
+	u32 bls_debug_mask;
+};
+
 struct mtk_disp_pwm {
 	struct pwm_chip chip;
+	const struct mtk_pwm_data *data;
 	struct clk *clk_main;
 	struct clk *clk_mm;
 	void __iomem *base;
@@ -106,12 +116,21 @@ static int mtk_disp_pwm_config(struct pwm_chip *chip, struct pwm_device *pwm,
 		return err;
 	}
 
-	mtk_disp_pwm_update_bits(mdp, DISP_PWM_CON_0, PWM_CLKDIV_MASK,
+	mtk_disp_pwm_update_bits(mdp, mdp->data->con0,
+				 PWM_CLKDIV_MASK,
 				 clk_div << PWM_CLKDIV_SHIFT);
-	mtk_disp_pwm_update_bits(mdp, DISP_PWM_CON_1,
-				 PWM_PERIOD_MASK | PWM_HIGH_WIDTH_MASK, value);
-	mtk_disp_pwm_update_bits(mdp, DISP_PWM_COMMIT, PWM_COMMIT_MASK, 1);
-	mtk_disp_pwm_update_bits(mdp, DISP_PWM_COMMIT, PWM_COMMIT_MASK, 0);
+	mtk_disp_pwm_update_bits(mdp, mdp->data->con1,
+				 PWM_PERIOD_MASK | PWM_HIGH_WIDTH_MASK,
+				 value);
+
+	if (mdp->data->has_commit) {
+		mtk_disp_pwm_update_bits(mdp, mdp->data->commit,
+					 mdp->data->commit_mask,
+					 mdp->data->commit_mask);
+		mtk_disp_pwm_update_bits(mdp, mdp->data->commit,
+					 mdp->data->commit_mask,
+					 0x0);
+	}
 
 	clk_disable(mdp->clk_mm);
 	clk_disable(mdp->clk_main);
@@ -134,7 +153,8 @@ static int mtk_disp_pwm_enable(struct pwm_chip *chip, struct pwm_device *pwm)
 		return err;
 	}
 
-	mtk_disp_pwm_update_bits(mdp, DISP_PWM_EN, PWM_ENABLE_MASK, 1);
+	mtk_disp_pwm_update_bits(mdp, DISP_PWM_EN, mdp->data->enable_mask,
+				 mdp->data->enable_mask);
 
 	return 0;
 }
@@ -143,7 +163,8 @@ static void mtk_disp_pwm_disable(struct pwm_chip *chip, struct pwm_device *pwm)
 {
 	struct mtk_disp_pwm *mdp = to_mtk_disp_pwm(chip);
 
-	mtk_disp_pwm_update_bits(mdp, DISP_PWM_EN, PWM_ENABLE_MASK, 0);
+	mtk_disp_pwm_update_bits(mdp, DISP_PWM_EN, mdp->data->enable_mask,
+				 0x0);
 
 	clk_disable(mdp->clk_mm);
 	clk_disable(mdp->clk_main);
@@ -166,6 +187,8 @@ static int mtk_disp_pwm_probe(struct platform_device *pdev)
 	if (!mdp)
 		return -ENOMEM;
 
+	mdp->data = of_device_get_match_data(&pdev->dev);
+
 	r = platform_get_resource(pdev, IORESOURCE_MEM, 0);
 	mdp->base = devm_ioremap_resource(&pdev->dev, r);
 	if (IS_ERR(mdp->base))
@@ -200,6 +223,19 @@ static int mtk_disp_pwm_probe(struct platform_device *pdev)
 
 	platform_set_drvdata(pdev, mdp);
 
+	/*
+	 * For MT2701, disable double buffer before writing register
+	 * and select manual mode and use PWM_PERIOD/PWM_HIGH_WIDTH.
+	 */
+	if (!mdp->data->has_commit) {
+		mtk_disp_pwm_update_bits(mdp, mdp->data->bls_debug,
+					 mdp->data->bls_debug_mask,
+					 mdp->data->bls_debug_mask);
+		mtk_disp_pwm_update_bits(mdp, mdp->data->con0,
+					 mdp->data->con0_sel,
+					 mdp->data->con0_sel);
+	}
+
 	return 0;
 
 disable_clk_mm:
@@ -221,9 +257,30 @@ static int mtk_disp_pwm_remove(struct platform_device *pdev)
 	return ret;
 }
 
+static const struct mtk_pwm_data mt2701_pwm_data = {
+	.enable_mask = BIT(16),
+	.con0 = 0xa8,
+	.con0_sel = 0x2,
+	.con1 = 0xac,
+	.has_commit = false,
+	.bls_debug = 0xb0,
+	.bls_debug_mask = 0x3,
+};
+
+static const struct mtk_pwm_data mt8173_pwm_data = {
+	.enable_mask = BIT(0),
+	.con0 = 0x10,
+	.con0_sel = 0x0,
+	.con1 = 0x14,
+	.has_commit = true,
+	.commit = 0x8,
+	.commit_mask = 0x1,
+};
+
 static const struct of_device_id mtk_disp_pwm_of_match[] = {
-	{ .compatible = "mediatek,mt8173-disp-pwm" },
-	{ .compatible = "mediatek,mt6595-disp-pwm" },
+	{ .compatible = "mediatek,mt2701-disp-pwm", .data = &mt2701_pwm_data},
+	{ .compatible = "mediatek,mt6595-disp-pwm", .data = &mt8173_pwm_data},
+	{ .compatible = "mediatek,mt8173-disp-pwm", .data = &mt8173_pwm_data},
 	{ }
 };
 MODULE_DEVICE_TABLE(of, mtk_disp_pwm_of_match);
diff --git a/drivers/pwm/pwm-samsung.c b/drivers/pwm/pwm-samsung.c
index ada2d326dc3e..f113cda47032 100644
--- a/drivers/pwm/pwm-samsung.c
+++ b/drivers/pwm/pwm-samsung.c
@@ -193,9 +193,18 @@ static unsigned long pwm_samsung_calc_tin(struct samsung_pwm_chip *chip,
 	 * divider settings and choose the lowest divisor that can generate
 	 * frequencies lower than requested.
 	 */
-	for (div = variant->div_base; div < 4; ++div)
-		if ((rate >> (variant->bits + div)) < freq)
-			break;
+	if (variant->bits < 32) {
+		/* Only for s3c24xx */
+		for (div = variant->div_base; div < 4; ++div)
+			if ((rate >> (variant->bits + div)) < freq)
+				break;
+	} else {
+		/*
+		 * Other variants have enough counter bits to generate any
+		 * requested rate, so no need to check higher divisors.
+		 */
+		div = variant->div_base;
+	}
 
 	pwm_samsung_set_divisor(chip, chan, BIT(div));
 
diff --git a/drivers/pwm/pwm-sti.c b/drivers/pwm/pwm-sti.c
index 92abbd56b9f7..dd82dc840af9 100644
--- a/drivers/pwm/pwm-sti.c
+++ b/drivers/pwm/pwm-sti.c
@@ -1,8 +1,10 @@
 /*
- * PWM device driver for ST SoCs.
- * Author: Ajit Pal Singh <ajitpal.singh@st.com>
+ * PWM device driver for ST SoCs
+ *
+ * Copyright (C) 2013-2016 STMicroelectronics (R&D) Limited
  *
- * Copyright (C) 2013-2014 STMicroelectronics (R&D) Limited
+ * Author: Ajit Pal Singh <ajitpal.singh@st.com>
+ *         Lee Jones <lee.jones@linaro.org>
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License as published by
@@ -11,6 +13,7 @@
  */
 
 #include <linux/clk.h>
+#include <linux/interrupt.h>
 #include <linux/math64.h>
 #include <linux/mfd/syscon.h>
 #include <linux/module.h>
@@ -18,43 +21,82 @@
 #include <linux/platform_device.h>
 #include <linux/pwm.h>
 #include <linux/regmap.h>
+#include <linux/sched.h>
 #include <linux/slab.h>
 #include <linux/time.h>
+#include <linux/wait.h>
+
+#define PWM_OUT_VAL(x)	(0x00 + (4 * (x))) /* Device's Duty Cycle register */
+#define PWM_CPT_VAL(x)	(0x10 + (4 * (x))) /* Capture value */
+#define PWM_CPT_EDGE(x) (0x30 + (4 * (x))) /* Edge to capture on */
 
-#define STI_DS_REG(ch)	(4 * (ch))	/* Channel's Duty Cycle register */
-#define STI_PWMCR	0x50		/* Control/Config register */
-#define STI_INTEN	0x54		/* Interrupt Enable/Disable register */
-#define PWM_PRESCALE_LOW_MASK		0x0f
-#define PWM_PRESCALE_HIGH_MASK		0xf0
+#define STI_PWM_CTRL		0x50	/* Control/Config register */
+#define STI_INT_EN		0x54	/* Interrupt Enable/Disable register */
+#define STI_INT_STA		0x58	/* Interrupt Status register */
+#define PWM_INT_ACK		0x5c
+#define PWM_PRESCALE_LOW_MASK	0x0f
+#define PWM_PRESCALE_HIGH_MASK	0xf0
+#define PWM_CPT_EDGE_MASK	0x03
+#define PWM_INT_ACK_MASK	0x1ff
+
+#define STI_MAX_CPT_DEVS	4
+#define CPT_DC_MAX		0xff
 
 /* Regfield IDs */
 enum {
+	/* Bits in PWM_CTRL*/
 	PWMCLK_PRESCALE_LOW,
 	PWMCLK_PRESCALE_HIGH,
-	PWM_EN,
-	PWM_INT_EN,
+	CPTCLK_PRESCALE,
+
+	PWM_OUT_EN,
+	PWM_CPT_EN,
+
+	PWM_CPT_INT_EN,
+	PWM_CPT_INT_STAT,
 
 	/* Keep last */
 	MAX_REGFIELDS
 };
 
+/*
+ * Each capture input can be programmed to detect rising-edge, falling-edge,
+ * either edge or neither egde.
+ */
+enum sti_cpt_edge {
+	CPT_EDGE_DISABLED,
+	CPT_EDGE_RISING,
+	CPT_EDGE_FALLING,
+	CPT_EDGE_BOTH,
+};
+
+struct sti_cpt_ddata {
+	u32 snapshot[3];
+	unsigned int index;
+	struct mutex lock;
+	wait_queue_head_t wait;
+};
+
 struct sti_pwm_compat_data {
 	const struct reg_field *reg_fields;
-	unsigned int num_chan;
+	unsigned int pwm_num_devs;
+	unsigned int cpt_num_devs;
 	unsigned int max_pwm_cnt;
 	unsigned int max_prescale;
 };
 
 struct sti_pwm_chip {
 	struct device *dev;
-	struct clk *clk;
-	unsigned long clk_rate;
+	struct clk *pwm_clk;
+	struct clk *cpt_clk;
 	struct regmap *regmap;
 	struct sti_pwm_compat_data *cdata;
 	struct regmap_field *prescale_low;
 	struct regmap_field *prescale_high;
-	struct regmap_field *pwm_en;
-	struct regmap_field *pwm_int_en;
+	struct regmap_field *pwm_out_en;
+	struct regmap_field *pwm_cpt_en;
+	struct regmap_field *pwm_cpt_int_en;
+	struct regmap_field *pwm_cpt_int_stat;
 	struct pwm_chip chip;
 	struct pwm_device *cur;
 	unsigned long configured;
@@ -64,10 +106,13 @@ struct sti_pwm_chip {
 };
 
 static const struct reg_field sti_pwm_regfields[MAX_REGFIELDS] = {
-	[PWMCLK_PRESCALE_LOW]	= REG_FIELD(STI_PWMCR, 0, 3),
-	[PWMCLK_PRESCALE_HIGH]	= REG_FIELD(STI_PWMCR, 11, 14),
-	[PWM_EN]		= REG_FIELD(STI_PWMCR, 9, 9),
-	[PWM_INT_EN]		= REG_FIELD(STI_INTEN, 0, 0),
+	[PWMCLK_PRESCALE_LOW] = REG_FIELD(STI_PWM_CTRL, 0, 3),
+	[PWMCLK_PRESCALE_HIGH] = REG_FIELD(STI_PWM_CTRL, 11, 14),
+	[CPTCLK_PRESCALE] = REG_FIELD(STI_PWM_CTRL, 4, 8),
+	[PWM_OUT_EN] = REG_FIELD(STI_PWM_CTRL, 9, 9),
+	[PWM_CPT_EN] = REG_FIELD(STI_PWM_CTRL, 10, 10),
+	[PWM_CPT_INT_EN] = REG_FIELD(STI_INT_EN, 1, 4),
+	[PWM_CPT_INT_STAT] = REG_FIELD(STI_INT_STA, 1, 4),
 };
 
 static inline struct sti_pwm_chip *to_sti_pwmchip(struct pwm_chip *chip)
@@ -82,61 +127,68 @@ static int sti_pwm_get_prescale(struct sti_pwm_chip *pc, unsigned long period,
 				unsigned int *prescale)
 {
 	struct sti_pwm_compat_data *cdata = pc->cdata;
-	unsigned long val;
+	unsigned long clk_rate;
+	unsigned long value;
 	unsigned int ps;
 
+	clk_rate = clk_get_rate(pc->pwm_clk);
+	if (!clk_rate) {
+		dev_err(pc->dev, "failed to get clock rate\n");
+		return -EINVAL;
+	}
+
 	/*
-	 * prescale = ((period_ns * clk_rate) / (10^9 * (max_pwm_count + 1)) - 1
+	 * prescale = ((period_ns * clk_rate) / (10^9 * (max_pwm_cnt + 1)) - 1
 	 */
-	val = NSEC_PER_SEC / pc->clk_rate;
-	val *= cdata->max_pwm_cnt + 1;
+	value = NSEC_PER_SEC / clk_rate;
+	value *= cdata->max_pwm_cnt + 1;
 
-	if (period % val) {
+	if (period % value)
 		return -EINVAL;
-	} else {
-		ps  = period / val - 1;
-		if (ps > cdata->max_prescale)
-			return -EINVAL;
-	}
+
+	ps  = period / value - 1;
+	if (ps > cdata->max_prescale)
+		return -EINVAL;
+
 	*prescale = ps;
 
 	return 0;
 }
 
 /*
- * For STiH4xx PWM IP, the PWM period is fixed to 256 local clock cycles.
- * The only way to change the period (apart from changing the PWM input clock)
- * is to change the PWM clock prescaler.
- * The prescaler is of 8 bits, so 256 prescaler values and hence
- * 256 possible period values are supported (for a particular clock rate).
- * The requested period will be applied only if it matches one of these
- * 256 values.
+ * For STiH4xx PWM IP, the PWM period is fixed to 256 local clock cycles. The
+ * only way to change the period (apart from changing the PWM input clock) is
+ * to change the PWM clock prescaler.
+ *
+ * The prescaler is of 8 bits, so 256 prescaler values and hence 256 possible
+ * period values are supported (for a particular clock rate). The requested
+ * period will be applied only if it matches one of these 256 values.
  */
 static int sti_pwm_config(struct pwm_chip *chip, struct pwm_device *pwm,
-			 int duty_ns, int period_ns)
+			  int duty_ns, int period_ns)
 {
 	struct sti_pwm_chip *pc = to_sti_pwmchip(chip);
 	struct sti_pwm_compat_data *cdata = pc->cdata;
+	unsigned int ncfg, value, prescale = 0;
 	struct pwm_device *cur = pc->cur;
 	struct device *dev = pc->dev;
-	unsigned int prescale = 0, pwmvalx;
-	int ret;
-	unsigned int ncfg;
 	bool period_same = false;
+	int ret;
 
 	ncfg = hweight_long(pc->configured);
 	if (ncfg)
 		period_same = (period_ns == pwm_get_period(cur));
 
-	/* Allow configuration changes if one of the
-	 * following conditions satisfy.
-	 * 1. No channels have been configured.
-	 * 2. Only one channel has been configured and the new request
-	 *    is for the same channel.
-	 * 3. Only one channel has been configured and the new request is
-	 *    for a new channel and period of the new channel is same as
-	 *    the current configured period.
-	 * 4. More than one channels are configured and period of the new
+	/*
+	 * Allow configuration changes if one of the following conditions
+	 * satisfy.
+	 * 1. No devices have been configured.
+	 * 2. Only one device has been configured and the new request is for
+	 *    the same device.
+	 * 3. Only one device has been configured and the new request is for
+	 *    a new device and period of the new device is same as the current
+	 *    configured period.
+	 * 4. More than one devices are configured and period of the new
 	 *    requestis the same as the current period.
 	 */
 	if (!ncfg ||
@@ -144,7 +196,11 @@ static int sti_pwm_config(struct pwm_chip *chip, struct pwm_device *pwm,
 	    ((ncfg == 1) && (pwm->hwpwm != cur->hwpwm) && period_same) ||
 	    ((ncfg > 1) && period_same)) {
 		/* Enable clock before writing to PWM registers. */
-		ret = clk_enable(pc->clk);
+		ret = clk_enable(pc->pwm_clk);
+		if (ret)
+			return ret;
+
+		ret = clk_enable(pc->cpt_clk);
 		if (ret)
 			return ret;
 
@@ -153,15 +209,15 @@ static int sti_pwm_config(struct pwm_chip *chip, struct pwm_device *pwm,
 			if (ret)
 				goto clk_dis;
 
-			ret =
-			regmap_field_write(pc->prescale_low,
-					   prescale & PWM_PRESCALE_LOW_MASK);
+			value = prescale & PWM_PRESCALE_LOW_MASK;
+
+			ret = regmap_field_write(pc->prescale_low, value);
 			if (ret)
 				goto clk_dis;
 
-			ret =
-			regmap_field_write(pc->prescale_high,
-				(prescale & PWM_PRESCALE_HIGH_MASK) >> 4);
+			value = (prescale & PWM_PRESCALE_HIGH_MASK) >> 4;
+
+			ret = regmap_field_write(pc->prescale_high, value);
 			if (ret)
 				goto clk_dis;
 		}
@@ -172,25 +228,26 @@ static int sti_pwm_config(struct pwm_chip *chip, struct pwm_device *pwm,
 		 * PWM pulse = (max_pwm_count + 1) local cycles,
 		 * that is continuous pulse: signal never goes low.
 		 */
-		pwmvalx = cdata->max_pwm_cnt * duty_ns / period_ns;
+		value = cdata->max_pwm_cnt * duty_ns / period_ns;
 
-		ret = regmap_write(pc->regmap, STI_DS_REG(pwm->hwpwm), pwmvalx);
+		ret = regmap_write(pc->regmap, PWM_OUT_VAL(pwm->hwpwm), value);
 		if (ret)
 			goto clk_dis;
 
-		ret = regmap_field_write(pc->pwm_int_en, 0);
+		ret = regmap_field_write(pc->pwm_cpt_int_en, 0);
 
 		set_bit(pwm->hwpwm, &pc->configured);
 		pc->cur = pwm;
 
-		dev_dbg(dev, "prescale:%u, period:%i, duty:%i, pwmvalx:%u\n",
-			prescale, period_ns, duty_ns, pwmvalx);
+		dev_dbg(dev, "prescale:%u, period:%i, duty:%i, value:%u\n",
+			prescale, period_ns, duty_ns, value);
 	} else {
 		return -EINVAL;
 	}
 
 clk_dis:
-	clk_disable(pc->clk);
+	clk_disable(pc->pwm_clk);
+	clk_disable(pc->cpt_clk);
 	return ret;
 }
 
@@ -201,23 +258,30 @@ static int sti_pwm_enable(struct pwm_chip *chip, struct pwm_device *pwm)
 	int ret = 0;
 
 	/*
-	 * Since we have a common enable for all PWM channels,
-	 * do not enable if already enabled.
+	 * Since we have a common enable for all PWM devices, do not enable if
+	 * already enabled.
 	 */
 	mutex_lock(&pc->sti_pwm_lock);
+
 	if (!pc->en_count) {
-		ret = clk_enable(pc->clk);
+		ret = clk_enable(pc->pwm_clk);
+		if (ret)
+			goto out;
+
+		ret = clk_enable(pc->cpt_clk);
 		if (ret)
 			goto out;
 
-		ret = regmap_field_write(pc->pwm_en, 1);
+		ret = regmap_field_write(pc->pwm_out_en, 1);
 		if (ret) {
-			dev_err(dev, "failed to enable PWM device:%d\n",
-				pwm->hwpwm);
+			dev_err(dev, "failed to enable PWM device %u: %d\n",
+				pwm->hwpwm, ret);
 			goto out;
 		}
 	}
+
 	pc->en_count++;
+
 out:
 	mutex_unlock(&pc->sti_pwm_lock);
 	return ret;
@@ -228,13 +292,17 @@ static void sti_pwm_disable(struct pwm_chip *chip, struct pwm_device *pwm)
 	struct sti_pwm_chip *pc = to_sti_pwmchip(chip);
 
 	mutex_lock(&pc->sti_pwm_lock);
+
 	if (--pc->en_count) {
 		mutex_unlock(&pc->sti_pwm_lock);
 		return;
 	}
-	regmap_field_write(pc->pwm_en, 0);
 
-	clk_disable(pc->clk);
+	regmap_field_write(pc->pwm_out_en, 0);
+
+	clk_disable(pc->pwm_clk);
+	clk_disable(pc->cpt_clk);
+
 	mutex_unlock(&pc->sti_pwm_lock);
 }
 
@@ -245,7 +313,90 @@ static void sti_pwm_free(struct pwm_chip *chip, struct pwm_device *pwm)
 	clear_bit(pwm->hwpwm, &pc->configured);
 }
 
+static int sti_pwm_capture(struct pwm_chip *chip, struct pwm_device *pwm,
+			   struct pwm_capture *result, unsigned long timeout)
+{
+	struct sti_pwm_chip *pc = to_sti_pwmchip(chip);
+	struct sti_pwm_compat_data *cdata = pc->cdata;
+	struct sti_cpt_ddata *ddata = pwm_get_chip_data(pwm);
+	struct device *dev = pc->dev;
+	unsigned int effective_ticks;
+	unsigned long long high, low;
+	int ret;
+
+	if (pwm->hwpwm >= cdata->cpt_num_devs) {
+		dev_err(dev, "device %u is not valid\n", pwm->hwpwm);
+		return -EINVAL;
+	}
+
+	mutex_lock(&ddata->lock);
+	ddata->index = 0;
+
+	/* Prepare capture measurement */
+	regmap_write(pc->regmap, PWM_CPT_EDGE(pwm->hwpwm), CPT_EDGE_RISING);
+	regmap_field_write(pc->pwm_cpt_int_en, BIT(pwm->hwpwm));
+
+	/* Enable capture */
+	ret = regmap_field_write(pc->pwm_cpt_en, 1);
+	if (ret) {
+		dev_err(dev, "failed to enable PWM capture %u: %d\n",
+			pwm->hwpwm, ret);
+		goto out;
+	}
+
+	ret = wait_event_interruptible_timeout(ddata->wait, ddata->index > 1,
+					       msecs_to_jiffies(timeout));
+
+	regmap_write(pc->regmap, PWM_CPT_EDGE(pwm->hwpwm), CPT_EDGE_DISABLED);
+
+	if (ret == -ERESTARTSYS)
+		goto out;
+
+	switch (ddata->index) {
+	case 0:
+	case 1:
+		/*
+		 * Getting here could mean:
+		 *  - input signal is constant of less than 1 Hz
+		 *  - there is no input signal at all
+		 *
+		 * In such case the frequency is rounded down to 0
+		 */
+		result->period = 0;
+		result->duty_cycle = 0;
+
+		break;
+
+	case 2:
+		/* We have everying we need */
+		high = ddata->snapshot[1] - ddata->snapshot[0];
+		low = ddata->snapshot[2] - ddata->snapshot[1];
+
+		effective_ticks = clk_get_rate(pc->cpt_clk);
+
+		result->period = (high + low) * NSEC_PER_SEC;
+		result->period /= effective_ticks;
+
+		result->duty_cycle = high * NSEC_PER_SEC;
+		result->duty_cycle /= effective_ticks;
+
+		break;
+
+	default:
+		dev_err(dev, "internal error\n");
+		break;
+	}
+
+out:
+	/* Disable capture */
+	regmap_field_write(pc->pwm_cpt_en, 0);
+
+	mutex_unlock(&ddata->lock);
+	return ret;
+}
+
 static const struct pwm_ops sti_pwm_ops = {
+	.capture = sti_pwm_capture,
 	.config = sti_pwm_config,
 	.enable = sti_pwm_enable,
 	.disable = sti_pwm_disable,
@@ -253,17 +404,98 @@ static const struct pwm_ops sti_pwm_ops = {
 	.owner = THIS_MODULE,
 };
 
+static irqreturn_t sti_pwm_interrupt(int irq, void *data)
+{
+	struct sti_pwm_chip *pc = data;
+	struct device *dev = pc->dev;
+	struct sti_cpt_ddata *ddata;
+	int devicenum;
+	unsigned int cpt_int_stat;
+	unsigned int reg;
+	int ret = IRQ_NONE;
+
+	ret = regmap_field_read(pc->pwm_cpt_int_stat, &cpt_int_stat);
+	if (ret)
+		return ret;
+
+	while (cpt_int_stat) {
+		devicenum = ffs(cpt_int_stat) - 1;
+
+		ddata = pwm_get_chip_data(&pc->chip.pwms[devicenum]);
+
+		/*
+		 * Capture input:
+		 *    _______                   _______
+		 *   |       |                 |       |
+		 * __|       |_________________|       |________
+		 *   ^0      ^1                ^2
+		 *
+		 * Capture start by the first available rising edge. When a
+		 * capture event occurs, capture value (CPT_VALx) is stored,
+		 * index incremented, capture edge changed.
+		 *
+		 * After the capture, if the index > 1, we have collected the
+		 * necessary data so we signal the thread waiting for it and
+		 * disable the capture by setting capture edge to none
+		 */
+
+		regmap_read(pc->regmap,
+			    PWM_CPT_VAL(devicenum),
+			    &ddata->snapshot[ddata->index]);
+
+		switch (ddata->index) {
+		case 0:
+		case 1:
+			regmap_read(pc->regmap, PWM_CPT_EDGE(devicenum), &reg);
+			reg ^= PWM_CPT_EDGE_MASK;
+			regmap_write(pc->regmap, PWM_CPT_EDGE(devicenum), reg);
+
+			ddata->index++;
+			break;
+
+		case 2:
+			regmap_write(pc->regmap,
+				     PWM_CPT_EDGE(devicenum),
+				     CPT_EDGE_DISABLED);
+			wake_up(&ddata->wait);
+			break;
+
+		default:
+			dev_err(dev, "Internal error\n");
+		}
+
+		cpt_int_stat &= ~BIT_MASK(devicenum);
+
+		ret = IRQ_HANDLED;
+	}
+
+	/* Just ACK everything */
+	regmap_write(pc->regmap, PWM_INT_ACK, PWM_INT_ACK_MASK);
+
+	return ret;
+}
+
 static int sti_pwm_probe_dt(struct sti_pwm_chip *pc)
 {
 	struct device *dev = pc->dev;
 	const struct reg_field *reg_fields;
 	struct device_node *np = dev->of_node;
 	struct sti_pwm_compat_data *cdata = pc->cdata;
-	u32 num_chan;
+	u32 num_devs;
+	int ret;
+
+	ret = of_property_read_u32(np, "st,pwm-num-chan", &num_devs);
+	if (!ret)
+		cdata->pwm_num_devs = num_devs;
+
+	ret = of_property_read_u32(np, "st,capture-num-chan", &num_devs);
+	if (!ret)
+		cdata->cpt_num_devs = num_devs;
 
-	of_property_read_u32(np, "st,pwm-num-chan", &num_chan);
-	if (num_chan)
-		cdata->num_chan = num_chan;
+	if (!cdata->pwm_num_devs && !cdata->cpt_num_devs) {
+		dev_err(dev, "No channels configured\n");
+		return -EINVAL;
+	}
 
 	reg_fields = cdata->reg_fields;
 
@@ -277,15 +509,26 @@ static int sti_pwm_probe_dt(struct sti_pwm_chip *pc)
 	if (IS_ERR(pc->prescale_high))
 		return PTR_ERR(pc->prescale_high);
 
-	pc->pwm_en = devm_regmap_field_alloc(dev, pc->regmap,
-					     reg_fields[PWM_EN]);
-	if (IS_ERR(pc->pwm_en))
-		return PTR_ERR(pc->pwm_en);
 
-	pc->pwm_int_en = devm_regmap_field_alloc(dev, pc->regmap,
-						 reg_fields[PWM_INT_EN]);
-	if (IS_ERR(pc->pwm_int_en))
-		return PTR_ERR(pc->pwm_int_en);
+	pc->pwm_out_en = devm_regmap_field_alloc(dev, pc->regmap,
+						 reg_fields[PWM_OUT_EN]);
+	if (IS_ERR(pc->pwm_out_en))
+		return PTR_ERR(pc->pwm_out_en);
+
+	pc->pwm_cpt_en = devm_regmap_field_alloc(dev, pc->regmap,
+						 reg_fields[PWM_CPT_EN]);
+	if (IS_ERR(pc->pwm_cpt_en))
+		return PTR_ERR(pc->pwm_cpt_en);
+
+	pc->pwm_cpt_int_en = devm_regmap_field_alloc(dev, pc->regmap,
+						reg_fields[PWM_CPT_INT_EN]);
+	if (IS_ERR(pc->pwm_cpt_int_en))
+		return PTR_ERR(pc->pwm_cpt_int_en);
+
+	pc->pwm_cpt_int_stat = devm_regmap_field_alloc(dev, pc->regmap,
+						reg_fields[PWM_CPT_INT_STAT]);
+	if (PTR_ERR_OR_ZERO(pc->pwm_cpt_int_stat))
+		return PTR_ERR(pc->pwm_cpt_int_stat);
 
 	return 0;
 }
@@ -302,7 +545,8 @@ static int sti_pwm_probe(struct platform_device *pdev)
 	struct sti_pwm_compat_data *cdata;
 	struct sti_pwm_chip *pc;
 	struct resource *res;
-	int ret;
+	unsigned int i;
+	int irq, ret;
 
 	pc = devm_kzalloc(dev, sizeof(*pc), GFP_KERNEL);
 	if (!pc)
@@ -323,14 +567,28 @@ static int sti_pwm_probe(struct platform_device *pdev)
 	if (IS_ERR(pc->regmap))
 		return PTR_ERR(pc->regmap);
 
+	irq = platform_get_irq(pdev, 0);
+	if (irq < 0) {
+		dev_err(&pdev->dev, "Failed to obtain IRQ\n");
+		return irq;
+	}
+
+	ret = devm_request_irq(&pdev->dev, irq, sti_pwm_interrupt, 0,
+			       pdev->name, pc);
+	if (ret < 0) {
+		dev_err(&pdev->dev, "Failed to request IRQ\n");
+		return ret;
+	}
+
 	/*
 	 * Setup PWM data with default values: some values could be replaced
 	 * with specific ones provided from Device Tree.
 	 */
-	cdata->reg_fields   = &sti_pwm_regfields[0];
+	cdata->reg_fields = sti_pwm_regfields;
 	cdata->max_prescale = 0xff;
-	cdata->max_pwm_cnt  = 255;
-	cdata->num_chan     = 1;
+	cdata->max_pwm_cnt = 255;
+	cdata->pwm_num_devs = 0;
+	cdata->cpt_num_devs = 0;
 
 	pc->cdata = cdata;
 	pc->dev = dev;
@@ -341,36 +599,64 @@ static int sti_pwm_probe(struct platform_device *pdev)
 	if (ret)
 		return ret;
 
-	pc->clk = of_clk_get_by_name(dev->of_node, "pwm");
-	if (IS_ERR(pc->clk)) {
+	if (!cdata->pwm_num_devs)
+		goto skip_pwm;
+
+	pc->pwm_clk = of_clk_get_by_name(dev->of_node, "pwm");
+	if (IS_ERR(pc->pwm_clk)) {
 		dev_err(dev, "failed to get PWM clock\n");
-		return PTR_ERR(pc->clk);
+		return PTR_ERR(pc->pwm_clk);
 	}
 
-	pc->clk_rate = clk_get_rate(pc->clk);
-	if (!pc->clk_rate) {
-		dev_err(dev, "failed to get clock rate\n");
-		return -EINVAL;
+	ret = clk_prepare(pc->pwm_clk);
+	if (ret) {
+		dev_err(dev, "failed to prepare clock\n");
+		return ret;
 	}
 
-	ret = clk_prepare(pc->clk);
+skip_pwm:
+	if (!cdata->cpt_num_devs)
+		goto skip_cpt;
+
+	pc->cpt_clk = of_clk_get_by_name(dev->of_node, "capture");
+	if (IS_ERR(pc->cpt_clk)) {
+		dev_err(dev, "failed to get PWM capture clock\n");
+		return PTR_ERR(pc->cpt_clk);
+	}
+
+	ret = clk_prepare(pc->cpt_clk);
 	if (ret) {
 		dev_err(dev, "failed to prepare clock\n");
 		return ret;
 	}
 
+skip_cpt:
 	pc->chip.dev = dev;
 	pc->chip.ops = &sti_pwm_ops;
 	pc->chip.base = -1;
-	pc->chip.npwm = pc->cdata->num_chan;
+	pc->chip.npwm = pc->cdata->pwm_num_devs;
 	pc->chip.can_sleep = true;
 
 	ret = pwmchip_add(&pc->chip);
 	if (ret < 0) {
-		clk_unprepare(pc->clk);
+		clk_unprepare(pc->pwm_clk);
+		clk_unprepare(pc->cpt_clk);
 		return ret;
 	}
 
+	for (i = 0; i < cdata->cpt_num_devs; i++) {
+		struct sti_cpt_ddata *ddata;
+
+		ddata = devm_kzalloc(dev, sizeof(*ddata), GFP_KERNEL);
+		if (!ddata)
+			return -ENOMEM;
+
+		init_waitqueue_head(&ddata->wait);
+		mutex_init(&ddata->lock);
+
+		pwm_set_chip_data(&pc->chip.pwms[i], ddata);
+	}
+
 	platform_set_drvdata(pdev, pc);
 
 	return 0;
@@ -381,10 +667,11 @@ static int sti_pwm_remove(struct platform_device *pdev)
 	struct sti_pwm_chip *pc = platform_get_drvdata(pdev);
 	unsigned int i;
 
-	for (i = 0; i < pc->cdata->num_chan; i++)
+	for (i = 0; i < pc->cdata->pwm_num_devs; i++)
 		pwm_disable(&pc->chip.pwms[i]);
 
-	clk_unprepare(pc->clk);
+	clk_unprepare(pc->pwm_clk);
+	clk_unprepare(pc->cpt_clk);
 
 	return pwmchip_remove(&pc->chip);
 }
diff --git a/drivers/pwm/pwm-sun4i.c b/drivers/pwm/pwm-sun4i.c
index 03a99a53c39e..b0803f6c64d9 100644
--- a/drivers/pwm/pwm-sun4i.c
+++ b/drivers/pwm/pwm-sun4i.c
@@ -284,6 +284,12 @@ static const struct sun4i_pwm_data sun4i_pwm_data_a20 = {
 	.npwm = 2,
 };
 
+static const struct sun4i_pwm_data sun4i_pwm_data_h3 = {
+	.has_prescaler_bypass = true,
+	.has_rdy = true,
+	.npwm = 1,
+};
+
 static const struct of_device_id sun4i_pwm_dt_ids[] = {
 	{
 		.compatible = "allwinner,sun4i-a10-pwm",
@@ -298,6 +304,9 @@ static const struct of_device_id sun4i_pwm_dt_ids[] = {
 		.compatible = "allwinner,sun7i-a20-pwm",
 		.data = &sun4i_pwm_data_a20,
 	}, {
+		.compatible = "allwinner,sun8i-h3-pwm",
+		.data = &sun4i_pwm_data_h3,
+	}, {
 		/* sentinel */
 	},
 };
diff --git a/drivers/pwm/pwm-tipwmss.c b/drivers/pwm/pwm-tipwmss.c
index 829f4991c96f..7fa85a1604da 100644
--- a/drivers/pwm/pwm-tipwmss.c
+++ b/drivers/pwm/pwm-tipwmss.c
@@ -34,7 +34,6 @@ static int pwmss_probe(struct platform_device *pdev)
 	struct device_node *node = pdev->dev.of_node;
 
 	pm_runtime_enable(&pdev->dev);
-	pm_runtime_get_sync(&pdev->dev);
 
 	/* Populate all the child nodes here... */
 	ret = of_platform_populate(node, NULL, NULL, &pdev->dev);
@@ -46,31 +45,13 @@ static int pwmss_probe(struct platform_device *pdev)
 
 static int pwmss_remove(struct platform_device *pdev)
 {
-	pm_runtime_put_sync(&pdev->dev);
 	pm_runtime_disable(&pdev->dev);
 	return 0;
 }
 
-#ifdef CONFIG_PM_SLEEP
-static int pwmss_suspend(struct device *dev)
-{
-	pm_runtime_put_sync(dev);
-	return 0;
-}
-
-static int pwmss_resume(struct device *dev)
-{
-	pm_runtime_get_sync(dev);
-	return 0;
-}
-#endif
-
-static SIMPLE_DEV_PM_OPS(pwmss_pm_ops, pwmss_suspend, pwmss_resume);
-
 static struct platform_driver pwmss_driver = {
 	.driver	= {
 		.name	= "pwmss",
-		.pm	= &pwmss_pm_ops,
 		.of_match_table	= pwmss_of_match,
 	},
 	.probe	= pwmss_probe,
diff --git a/drivers/pwm/pwm-twl.c b/drivers/pwm/pwm-twl.c
index 04f76725d591..7a993b056638 100644
--- a/drivers/pwm/pwm-twl.c
+++ b/drivers/pwm/pwm-twl.c
@@ -269,6 +269,22 @@ static void twl6030_pwm_disable(struct pwm_chip *chip, struct pwm_device *pwm)
 		goto out;
 	}
 
+	val |= TWL6030_PWM_TOGGLE(pwm->hwpwm, TWL6030_PWMXEN);
+
+	ret = twl_i2c_write_u8(TWL6030_MODULE_ID1, val, TWL6030_TOGGLE3_REG);
+	if (ret < 0) {
+		dev_err(chip->dev, "%s: Failed to disable PWM\n", pwm->label);
+		goto out;
+	}
+
+	val &= ~TWL6030_PWM_TOGGLE(pwm->hwpwm, TWL6030_PWMXEN);
+
+	ret = twl_i2c_write_u8(TWL6030_MODULE_ID1, val, TWL6030_TOGGLE3_REG);
+	if (ret < 0) {
+		dev_err(chip->dev, "%s: Failed to disable PWM\n", pwm->label);
+		goto out;
+	}
+
 	twl->twl6030_toggle3 = val;
 out:
 	mutex_unlock(&twl->mutex);