Merge tag 'mvebu-dt64-5.5-1' of git://git.infradead.org/linux-mvebu into arm/dt

mvebu dt64 for 5.5 (part 1)

 - Add new Marvell CN9130 SoC support (CN9130 is made of one AP807 and
   one internal CP115, similar to the Armada 7K/8K using AP806 and
   CP110).
 - Reorganize EspressoBin device tree to add new variant of the boards
   (Armada 3270 based)
 - Add firmware node for turris Mox (Armada 3720 based)

* tag 'mvebu-dt64-5.5-1' of git://git.infradead.org/linux-mvebu: (23 commits)
  arm64: dts: armada-3720-turris-mox: add firmware node
  arm64: dts: marvell: add ESPRESSObin variants
  arm64: dts: marvell: Add support for Marvell CN9132-DB
  arm64: dts: marvell: Add support for Marvell CN9131-DB
  arm64: dts: marvell: Add support for Marvell CN9130-DB
  arm64: dts: marvell: Add support for Marvell CN9130 SoC support
  arm64: dts: marvell: Add support for CP115
  arm64: dts: marvell: Externalize PCIe macros from CP11x file
  arm64: dts: marvell: Drop PCIe I/O ranges from CP11x file
  arm64: dts: marvell: Prepare the introduction of CP115
  arm64: dts: marvell: Fix CP110 NAND controller node multi-line comment alignment
  arm64: dts: marvell: Add AP807-quad cache description
  arm64: dts: marvell: Add AP806-quad cache description
  arm64: dts: marvell: Add AP806-dual cache description
  arm64: dts: marvell: Add support for AP807/AP807-quad
  dt-bindings: marvell: Declare the CN913x SoC compatibles
  dt-bindings: marvell: Convert the SoC compatibles description to YAML
  arm64: dts: marvell: Move clocks to AP806 specific file
  arm64: dts: marvell: Prepare the introduction of AP807 based SoCs
  MAINTAINERS: Add new Marvell CN9130-based files to track
  ...

Link: https://lore.kernel.org/r/87zhhc3bo6.fsf@FE-laptop
Signed-off-by: Olof Johansson <olof@lixom.net>

28 files changed, 2533 insertions, 1274 deletions

diff --git a/Documentation/devicetree/bindings/arm/marvell/ap806-system-controller.txt b/Documentation/devicetree/bindings/arm/marvell/ap80x-system-controller.txt
index 26410fbb85be..098d932fc963 100644
--- a/Documentation/devicetree/bindings/arm/marvell/ap806-system-controller.txt
+++ b/Documentation/devicetree/bindings/arm/marvell/ap80x-system-controller.txt
@@ -1,15 +1,15 @@
-Marvell Armada AP806 System Controller
+Marvell Armada AP80x System Controller
 ======================================
 
-The AP806 is one of the two core HW blocks of the Marvell Armada 7K/8K
-SoCs. It contains system controllers, which provide several registers
-giving access to numerous features: clocks, pin-muxing and many other
-SoC configuration items. This DT binding allows to describe these
-system controllers.
+The AP806/AP807 is one of the two core HW blocks of the Marvell Armada
+7K/8K/931x SoCs. It contains system controllers, which provide several
+registers giving access to numerous features: clocks, pin-muxing and
+many other SoC configuration items. This DT binding allows to describe
+these system controllers.
 
 For the top level node:
  - compatible: must be: "syscon", "simple-mfd";
- - reg: register area of the AP806 system controller
+ - reg: register area of the AP80x system controller
 
 SYSTEM CONTROLLER 0
 ===================
diff --git a/Documentation/devicetree/bindings/arm/marvell/armada-7k-8k.txt b/Documentation/devicetree/bindings/arm/marvell/armada-7k-8k.txt
deleted file mode 100644
index df98a9c82a8c..000000000000
--- a/Documentation/devicetree/bindings/arm/marvell/armada-7k-8k.txt
+++ /dev/null
@@ -1,24 +0,0 @@
-Marvell Armada 7K/8K Platforms Device Tree Bindings
----------------------------------------------------
-
-Boards using a SoC of the Marvell Armada 7K or 8K families must carry
-the following root node property:
-
- - compatible, with one of the following values:
-
-   - "marvell,armada7020", "marvell,armada-ap806-dual", "marvell,armada-ap806"
-      when the SoC being used is the Armada 7020
-
-   - "marvell,armada7040", "marvell,armada-ap806-quad", "marvell,armada-ap806"
-      when the SoC being used is the Armada 7040
-
-   - "marvell,armada8020", "marvell,armada-ap806-dual", "marvell,armada-ap806"
-      when the SoC being used is the Armada 8020
-
-   - "marvell,armada8040", "marvell,armada-ap806-quad", "marvell,armada-ap806"
-      when the SoC being used is the Armada 8040
-
-Example:
-
-compatible = "marvell,armada7040-db", "marvell,armada7040",
-             "marvell,armada-ap806-quad", "marvell,armada-ap806";
diff --git a/Documentation/devicetree/bindings/arm/marvell/armada-7k-8k.yaml b/Documentation/devicetree/bindings/arm/marvell/armada-7k-8k.yaml
new file mode 100644
index 000000000000..a9828c50c0fb
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/marvell/armada-7k-8k.yaml
@@ -0,0 +1,61 @@
+# SPDX-License-Identifier: (GPL-2.0+ OR X11)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/arm/marvell/armada-7k-8k.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Marvell Armada 7K/8K Platforms Device Tree Bindings
+
+maintainers:
+  - Gregory CLEMENT <gregory.clement@bootlin.com>
+
+properties:
+  $nodename:
+    const: '/'
+  compatible:
+    oneOf:
+
+      - description: Armada 7020 SoC
+        items:
+          - const: marvell,armada7020
+          - const: marvell,armada-ap806-dual
+          - const: marvell,armada-ap806
+
+      - description: Armada 7040 SoC
+        items:
+          - const: marvell,armada7040
+          - const: marvell,armada-ap806-quad
+          - const: marvell,armada-ap806
+
+      - description: Armada 8020 SoC
+        items:
+          - const: marvell,armada8020
+          - const: marvell,armada-ap806-dual
+          - const: marvell,armada-ap806
+
+      - description: Armada 8040 SoC
+        items:
+          - const: marvell,armada8040
+          - const: marvell,armada-ap806-quad
+          - const: marvell,armada-ap806
+
+      - description: Armada CN9130 SoC with no external CP
+        items:
+          - const: marvell,cn9130
+          - const: marvell,armada-ap807-quad
+          - const: marvell,armada-ap807
+
+      - description: Armada CN9131 SoC with one external CP
+        items:
+          - const: marvell,cn9131
+          - const: marvell,cn9130
+          - const: marvell,armada-ap807-quad
+          - const: marvell,armada-ap807
+
+      - description: Armada CN9132 SoC with two external CPs
+        items:
+          - const: marvell,cn9132
+          - const: marvell,cn9131
+          - const: marvell,cn9130
+          - const: marvell,armada-ap807-quad
+          - const: marvell,armada-ap807
diff --git a/MAINTAINERS b/MAINTAINERS
index 55199ef7fa74..74ac6f24b3d8 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -1897,7 +1897,7 @@ F:	arch/arm/boot/dts/dove*
 F:	arch/arm/boot/dts/orion5x*
 T:	git git://git.infradead.org/linux-mvebu.git
 
-ARM/Marvell Kirkwood and Armada 370, 375, 38x, 39x, XP, 3700, 7K/8K SOC support
+ARM/Marvell Kirkwood and Armada 370, 375, 38x, 39x, XP, 3700, 7K/8K, CN9130 SOC support
 M:	Jason Cooper <jason@lakedaemon.net>
 M:	Andrew Lunn <andrew@lunn.ch>
 M:	Gregory Clement <gregory.clement@bootlin.com>
@@ -1909,6 +1909,7 @@ F:	arch/arm/boot/dts/kirkwood*
 F:	arch/arm/configs/mvebu_*_defconfig
 F:	arch/arm/mach-mvebu/
 F:	arch/arm64/boot/dts/marvell/armada*
+F:	arch/arm64/boot/dts/marvell/cn913*
 F:	drivers/cpufreq/armada-37xx-cpufreq.c
 F:	drivers/cpufreq/armada-8k-cpufreq.c
 F:	drivers/cpufreq/mvebu-cpufreq.c
diff --git a/arch/arm64/boot/dts/marvell/Makefile b/arch/arm64/boot/dts/marvell/Makefile
index 243338c914a4..f1b5127f0b89 100644
--- a/arch/arm64/boot/dts/marvell/Makefile
+++ b/arch/arm64/boot/dts/marvell/Makefile
@@ -10,3 +10,6 @@ dtb-$(CONFIG_ARCH_MVEBU) += armada-8040-db.dtb
 dtb-$(CONFIG_ARCH_MVEBU) += armada-8040-mcbin.dtb
 dtb-$(CONFIG_ARCH_MVEBU) += armada-8040-mcbin-singleshot.dtb
 dtb-$(CONFIG_ARCH_MVEBU) += armada-8080-db.dtb
+dtb-$(CONFIG_ARCH_MVEBU) += cn9130-db.dtb
+dtb-$(CONFIG_ARCH_MVEBU) += cn9131-db.dtb
+dtb-$(CONFIG_ARCH_MVEBU) += cn9132-db.dtb
diff --git a/arch/arm64/boot/dts/marvell/armada-3720-espressobin-emmc.dts b/arch/arm64/boot/dts/marvell/armada-3720-espressobin-emmc.dts
new file mode 100644
index 000000000000..bd9ed9dc9c3e
--- /dev/null
+++ b/arch/arm64/boot/dts/marvell/armada-3720-espressobin-emmc.dts
@@ -0,0 +1,42 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Device Tree file for Globalscale Marvell ESPRESSOBin Board with eMMC
+ * Copyright (C) 2018 Marvell
+ *
+ * Romain Perier <romain.perier@free-electrons.com>
+ * Konstantin Porotchkin <kostap@marvell.com>
+ *
+ */
+/*
+ * Schematic available at http://espressobin.net/wp-content/uploads/2017/08/ESPRESSObin_V5_Schematics.pdf
+ */
+
+#include "armada-3720-espressobin.dtsi"
+
+/ {
+	model = "Globalscale Marvell ESPRESSOBin Board (eMMC)";
+	compatible = "globalscale,espressobin-emmc", "globalscale,espressobin",
+		     "marvell,armada3720", "marvell,armada3710";
+};
+
+/* U11 */
+&sdhci0 {
+	non-removable;
+	bus-width = <8>;
+	mmc-ddr-1_8v;
+	mmc-hs400-1_8v;
+	marvell,xenon-emmc;
+	marvell,xenon-tun-count = <9>;
+	marvell,pad-type = "fixed-1-8v";
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc_pins>;
+	status = "okay";
+
+	#address-cells = <1>;
+	#size-cells = <0>;
+	mmccard: mmccard@0 {
+		compatible = "mmc-card";
+		reg = <0>;
+	};
+};
diff --git a/arch/arm64/boot/dts/marvell/armada-3720-espressobin-v7-emmc.dts b/arch/arm64/boot/dts/marvell/armada-3720-espressobin-v7-emmc.dts
new file mode 100644
index 000000000000..6e876a6d9532
--- /dev/null
+++ b/arch/arm64/boot/dts/marvell/armada-3720-espressobin-v7-emmc.dts
@@ -0,0 +1,59 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Device Tree file for Globalscale Marvell ESPRESSOBin Board V7 with eMMC
+ * Copyright (C) 2018 Marvell
+ *
+ * Romain Perier <romain.perier@free-electrons.com>
+ * Konstantin Porotchkin <kostap@marvell.com>
+ *
+ */
+/*
+ * Schematic available at http://wiki.espressobin.net/tiki-download_file.php?fileId=200
+ */
+
+#include "armada-3720-espressobin.dtsi"
+
+/ {
+	model = "Globalscale Marvell ESPRESSOBin Board V7 (eMMC)";
+	compatible = "globalscale,espressobin-v7-emmc", "globalscale,espressobin-v7",
+		     "globalscale,espressobin", "marvell,armada3720",
+		     "marvell,armada3710";
+};
+
+&switch0 {
+	ports {
+		port@1 {
+			reg = <1>;
+			label = "lan1";
+			phy-handle = <&switch0phy0>;
+		};
+
+		port@3 {
+			reg = <3>;
+			label = "wan";
+			phy-handle = <&switch0phy2>;
+		};
+	};
+};
+
+/* U11 */
+&sdhci0 {
+	non-removable;
+	bus-width = <8>;
+	mmc-ddr-1_8v;
+	mmc-hs400-1_8v;
+	marvell,xenon-emmc;
+	marvell,xenon-tun-count = <9>;
+	marvell,pad-type = "fixed-1-8v";
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc_pins>;
+	status = "okay";
+
+	#address-cells = <1>;
+	#size-cells = <0>;
+	mmccard: mmccard@0 {
+		compatible = "mmc-card";
+		reg = <0>;
+	};
+};
diff --git a/arch/arm64/boot/dts/marvell/armada-3720-espressobin-v7.dts b/arch/arm64/boot/dts/marvell/armada-3720-espressobin-v7.dts
new file mode 100644
index 000000000000..0f8405d085fd
--- /dev/null
+++ b/arch/arm64/boot/dts/marvell/armada-3720-espressobin-v7.dts
@@ -0,0 +1,36 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Device Tree file for Globalscale Marvell ESPRESSOBin Board V7
+ * Copyright (C) 2018 Marvell
+ *
+ * Romain Perier <romain.perier@free-electrons.com>
+ * Konstantin Porotchkin <kostap@marvell.com>
+ *
+ */
+/*
+ * Schematic available at http://wiki.espressobin.net/tiki-download_file.php?fileId=200
+ */
+
+#include "armada-3720-espressobin.dtsi"
+
+/ {
+	model = "Globalscale Marvell ESPRESSOBin Board V7";
+	compatible = "globalscale,espressobin-v7", "globalscale,espressobin",
+		     "marvell,armada3720", "marvell,armada3710";
+};
+
+&switch0 {
+	ports {
+		port@1 {
+			reg = <1>;
+			label = "lan1";
+			phy-handle = <&switch0phy0>;
+		};
+
+		port@3 {
+			reg = <3>;
+			label = "wan";
+			phy-handle = <&switch0phy2>;
+		};
+	};
+};
diff --git a/arch/arm64/boot/dts/marvell/armada-3720-espressobin.dts b/arch/arm64/boot/dts/marvell/armada-3720-espressobin.dts
index fbcf03f86c96..1542d836c090 100644
--- a/arch/arm64/boot/dts/marvell/armada-3720-espressobin.dts
+++ b/arch/arm64/boot/dts/marvell/armada-3720-espressobin.dts
@@ -12,191 +12,9 @@
 
 /dts-v1/;
 
-#include <dt-bindings/gpio/gpio.h>
-#include "armada-372x.dtsi"
+#include "armada-3720-espressobin.dtsi"
 
 / {
 	model = "Globalscale Marvell ESPRESSOBin Board";
 	compatible = "globalscale,espressobin", "marvell,armada3720", "marvell,armada3710";
-
-	chosen {
-		stdout-path = "serial0:115200n8";
-	};
-
-	memory@0 {
-		device_type = "memory";
-		reg = <0x00000000 0x00000000 0x00000000 0x20000000>;
-	};
-
-	vcc_sd_reg1: regulator {
-		compatible = "regulator-gpio";
-		regulator-name = "vcc_sd1";
-		regulator-min-microvolt = <1800000>;
-		regulator-max-microvolt = <3300000>;
-		regulator-boot-on;
-
-		gpios = <&gpionb 4 GPIO_ACTIVE_HIGH>;
-		gpios-states = <0>;
-		states = <1800000 0x1
-			  3300000 0x0>;
-		enable-active-high;
-	};
-};
-
-/* J9 */
-&pcie0 {
-	status = "okay";
-	phys = <&comphy1 0>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pcie_reset_pins &pcie_clkreq_pins>;
-};
-
-/* J6 */
-&sata {
-	status = "okay";
-	phys = <&comphy2 0>;
-	phy-names = "sata-phy";
-};
-
-/* J1 */
-&sdhci1 {
-	wp-inverted;
-	bus-width = <4>;
-	cd-gpios = <&gpionb 3 GPIO_ACTIVE_LOW>;
-	marvell,pad-type = "sd";
-	vqmmc-supply = <&vcc_sd_reg1>;
-
-	pinctrl-names = "default";
-	pinctrl-0 = <&sdio_pins>;
-	status = "okay";
-};
-
-/* U11 */
-&sdhci0 {
-	non-removable;
-	bus-width = <8>;
-	mmc-ddr-1_8v;
-	mmc-hs400-1_8v;
-	marvell,xenon-emmc;
-	marvell,xenon-tun-count = <9>;
-	marvell,pad-type = "fixed-1-8v";
-
-	pinctrl-names = "default";
-	pinctrl-0 = <&mmc_pins>;
-/*
- * This eMMC is not populated on all boards, so disable it by
- * default and let the bootloader enable it, if it is present
- */
-	status = "disabled";
-};
-
-&spi0 {
-	status = "okay";
-
-	flash@0 {
-		reg = <0>;
-		compatible = "jedec,spi-nor";
-		spi-max-frequency = <104000000>;
-		m25p,fast-read;
-	};
-};
-
-/* Exported on the micro USB connector J5 through an FTDI */
-&uart0 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&uart1_pins>;
-	status = "okay";
-};
-
-/*
- * Connector J17 and J18 expose a number of different features. Some pins are
- * multiplexed. This is the case for instance for the following features:
- * - UART1 (pin 24 = RX, pin 26 = TX). See armada-3720-db.dts for an example of
- *   how to enable it. Beware that the signals are 1.8V TTL.
- * - I2C
- * - SPI
- * - MMC
- */
-
-/* J7 */
-&usb3 {
-	status = "okay";
-};
-
-/* J8 */
-&usb2 {
-	status = "okay";
-};
-
-&mdio {
-	switch0: switch0@1 {
-		compatible = "marvell,mv88e6085";
-		#address-cells = <1>;
-		#size-cells = <0>;
-		reg = <1>;
-
-		dsa,member = <0 0>;
-
-		ports {
-			#address-cells = <1>;
-			#size-cells = <0>;
-
-			port@0 {
-				reg = <0>;
-				label = "cpu";
-				ethernet = <&eth0>;
-				phy-mode = "rgmii-id";
-				fixed-link {
-					speed = <1000>;
-					full-duplex;
-				};
-			};
-
-			port@1 {
-				reg = <1>;
-				label = "wan";
-				phy-handle = <&switch0phy0>;
-			};
-
-			port@2 {
-				reg = <2>;
-				label = "lan0";
-				phy-handle = <&switch0phy1>;
-			};
-
-			port@3 {
-				reg = <3>;
-				label = "lan1";
-				phy-handle = <&switch0phy2>;
-			};
-
-		};
-
-		mdio {
-			#address-cells = <1>;
-			#size-cells = <0>;
-
-			switch0phy0: switch0phy0@11 {
-				reg = <0x11>;
-			};
-			switch0phy1: switch0phy1@12 {
-				reg = <0x12>;
-			};
-			switch0phy2: switch0phy2@13 {
-				reg = <0x13>;
-			};
-		};
-	};
-};
-
-&eth0 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&rgmii_pins>, <&smi_pins>;
-	phy-mode = "rgmii-id";
-	status = "okay";
-
-	fixed-link {
-		speed = <1000>;
-		full-duplex;
-	};
 };
diff --git a/arch/arm64/boot/dts/marvell/armada-3720-espressobin.dtsi b/arch/arm64/boot/dts/marvell/armada-3720-espressobin.dtsi
new file mode 100644
index 000000000000..53b8ac55a7f3
--- /dev/null
+++ b/arch/arm64/boot/dts/marvell/armada-3720-espressobin.dtsi
@@ -0,0 +1,177 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Device Tree file for Globalscale Marvell ESPRESSOBin Board
+ * Copyright (C) 2016 Marvell
+ *
+ * Romain Perier <romain.perier@free-electrons.com>
+ *
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include "armada-372x.dtsi"
+
+/ {
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0x00000000 0x00000000 0x00000000 0x20000000>;
+	};
+
+	vcc_sd_reg1: regulator {
+		compatible = "regulator-gpio";
+		regulator-name = "vcc_sd1";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-boot-on;
+
+		gpios = <&gpionb 4 GPIO_ACTIVE_HIGH>;
+		gpios-states = <0>;
+		states = <1800000 0x1
+			  3300000 0x0>;
+		enable-active-high;
+	};
+};
+
+/* J9 */
+&pcie0 {
+	status = "okay";
+	phys = <&comphy1 0>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pcie_reset_pins &pcie_clkreq_pins>;
+};
+
+/* J6 */
+&sata {
+	status = "okay";
+	phys = <&comphy2 0>;
+	phy-names = "sata-phy";
+};
+
+/* J1 */
+&sdhci1 {
+	wp-inverted;
+	bus-width = <4>;
+	cd-gpios = <&gpionb 3 GPIO_ACTIVE_LOW>;
+	marvell,pad-type = "sd";
+	vqmmc-supply = <&vcc_sd_reg1>;
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&sdio_pins>;
+	status = "okay";
+};
+
+&spi0 {
+	status = "okay";
+
+	flash@0 {
+		reg = <0>;
+		compatible = "jedec,spi-nor";
+		spi-max-frequency = <104000000>;
+		m25p,fast-read;
+	};
+};
+
+/* Exported on the micro USB connector J5 through an FTDI */
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart1_pins>;
+	status = "okay";
+};
+
+/*
+ * Connector J17 and J18 expose a number of different features. Some pins are
+ * multiplexed. This is the case for instance for the following features:
+ * - UART1 (pin 24 = RX, pin 26 = TX). See armada-3720-db.dts for an example of
+ *   how to enable it. Beware that the signals are 1.8V TTL.
+ * - I2C
+ * - SPI
+ * - MMC
+ */
+
+/* J7 */
+&usb3 {
+	status = "okay";
+};
+
+/* J8 */
+&usb2 {
+	status = "okay";
+};
+
+&mdio {
+	switch0: switch0@1 {
+		compatible = "marvell,mv88e6085";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		reg = <1>;
+
+		dsa,member = <0 0>;
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+				label = "cpu";
+				ethernet = <&eth0>;
+				phy-mode = "rgmii-id";
+				fixed-link {
+					speed = <1000>;
+					full-duplex;
+				};
+			};
+
+			port@1 {
+				reg = <1>;
+				label = "wan";
+				phy-handle = <&switch0phy0>;
+			};
+
+			port@2 {
+				reg = <2>;
+				label = "lan0";
+				phy-handle = <&switch0phy1>;
+			};
+
+			port@3 {
+				reg = <3>;
+				label = "lan1";
+				phy-handle = <&switch0phy2>;
+			};
+
+		};
+
+		mdio {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			switch0phy0: switch0phy0@11 {
+				reg = <0x11>;
+			};
+			switch0phy1: switch0phy1@12 {
+				reg = <0x12>;
+			};
+			switch0phy2: switch0phy2@13 {
+				reg = <0x13>;
+			};
+		};
+	};
+};
+
+&eth0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&rgmii_pins>, <&smi_pins>;
+	phy-mode = "rgmii-id";
+	status = "okay";
+
+	fixed-link {
+		speed = <1000>;
+		full-duplex;
+	};
+};
diff --git a/arch/arm64/boot/dts/marvell/armada-3720-turris-mox.dts b/arch/arm64/boot/dts/marvell/armada-3720-turris-mox.dts
index d105986c6be1..38372fcc6430 100644
--- a/arch/arm64/boot/dts/marvell/armada-3720-turris-mox.dts
+++ b/arch/arm64/boot/dts/marvell/armada-3720-turris-mox.dts
@@ -111,6 +111,14 @@
 		/* enabled by U-Boot if SFP module is present */
 		status = "disabled";
 	};
+
+	firmware {
+		turris-mox-rwtm {
+			compatible = "cznic,turris-mox-rwtm";
+			mboxes = <&rwtm 0>;
+			status = "okay";
+		};
+	};
 };
 
 &i2c0 {
diff --git a/arch/arm64/boot/dts/marvell/armada-70x0.dtsi b/arch/arm64/boot/dts/marvell/armada-70x0.dtsi
index e5c6d7c25819..293403a1a333 100644
--- a/arch/arm64/boot/dts/marvell/armada-70x0.dtsi
+++ b/arch/arm64/boot/dts/marvell/armada-70x0.dtsi
@@ -17,23 +17,23 @@
 /*
  * Instantiate the CP110
  */
-#define CP110_NAME		cp0
-#define CP110_BASE		f2000000
-#define CP110_PCIE_IO_BASE	0xf9000000
-#define CP110_PCIE_MEM_BASE	0xf6000000
-#define CP110_PCIE0_BASE	f2600000
-#define CP110_PCIE1_BASE	f2620000
-#define CP110_PCIE2_BASE	f2640000
+#define CP11X_NAME		cp0
+#define CP11X_BASE		f2000000
+#define CP11X_PCIEx_MEM_BASE(iface) (0xf6000000 + (iface * 0x1000000))
+#define CP11X_PCIEx_MEM_SIZE(iface) 0xf00000
+#define CP11X_PCIE0_BASE	f2600000
+#define CP11X_PCIE1_BASE	f2620000
+#define CP11X_PCIE2_BASE	f2640000
 
 #include "armada-cp110.dtsi"
 
-#undef CP110_NAME
-#undef CP110_BASE
-#undef CP110_PCIE_IO_BASE
-#undef CP110_PCIE_MEM_BASE
-#undef CP110_PCIE0_BASE
-#undef CP110_PCIE1_BASE
-#undef CP110_PCIE2_BASE
+#undef CP11X_NAME
+#undef CP11X_BASE
+#undef CP11X_PCIEx_MEM_BASE
+#undef CP11X_PCIEx_MEM_SIZE
+#undef CP11X_PCIE0_BASE
+#undef CP11X_PCIE1_BASE
+#undef CP11X_PCIE2_BASE
 
 &cp0_gpio1 {
 	status = "okay";
diff --git a/arch/arm64/boot/dts/marvell/armada-8040-mcbin.dtsi b/arch/arm64/boot/dts/marvell/armada-8040-mcbin.dtsi
index d250f4b2bfed..572e2610e0a3 100644
--- a/arch/arm64/boot/dts/marvell/armada-8040-mcbin.dtsi
+++ b/arch/arm64/boot/dts/marvell/armada-8040-mcbin.dtsi
@@ -179,8 +179,7 @@
 	num-lanes = <4>;
 	num-viewport = <8>;
 	reset-gpios = <&cp0_gpio2 20 GPIO_ACTIVE_LOW>;
-	ranges = <0x81000000 0x0 0xf9010000 0x0 0xf9010000 0x0 0x10000
-		  0x82000000 0x0 0xc0000000 0x0 0xc0000000 0x0 0x20000000>;
+	ranges = <0x82000000 0x0 0xc0000000 0x0 0xc0000000 0x0 0x20000000>;
 	phys = <&cp0_comphy0 0>, <&cp0_comphy1 0>,
 	       <&cp0_comphy2 0>, <&cp0_comphy3 0>;
 	phy-names = "cp0-pcie0-x4-lane0-phy", "cp0-pcie0-x4-lane1-phy",
diff --git a/arch/arm64/boot/dts/marvell/armada-80x0.dtsi b/arch/arm64/boot/dts/marvell/armada-80x0.dtsi
index 8129b40f12a4..ee67c70bf02e 100644
--- a/arch/arm64/boot/dts/marvell/armada-80x0.dtsi
+++ b/arch/arm64/boot/dts/marvell/armada-80x0.dtsi
@@ -19,44 +19,44 @@
 /*
  * Instantiate the master CP110
  */
-#define CP110_NAME		cp0
-#define CP110_BASE		f2000000
-#define CP110_PCIE_IO_BASE	0xf9000000
-#define CP110_PCIE_MEM_BASE	0xf6000000
-#define CP110_PCIE0_BASE	f2600000
-#define CP110_PCIE1_BASE	f2620000
-#define CP110_PCIE2_BASE	f2640000
+#define CP11X_NAME		cp0
+#define CP11X_BASE		f2000000
+#define CP11X_PCIEx_MEM_BASE(iface) (0xf6000000 + (iface * 0x1000000))
+#define CP11X_PCIEx_MEM_SIZE(iface) 0xf00000
+#define CP11X_PCIE0_BASE	f2600000
+#define CP11X_PCIE1_BASE	f2620000
+#define CP11X_PCIE2_BASE	f2640000
 
 #include "armada-cp110.dtsi"
 
-#undef CP110_NAME
-#undef CP110_BASE
-#undef CP110_PCIE_IO_BASE
-#undef CP110_PCIE_MEM_BASE
-#undef CP110_PCIE0_BASE
-#undef CP110_PCIE1_BASE
-#undef CP110_PCIE2_BASE
+#undef CP11X_NAME
+#undef CP11X_BASE
+#undef CP11X_PCIEx_MEM_BASE
+#undef CP11X_PCIEx_MEM_SIZE
+#undef CP11X_PCIE0_BASE
+#undef CP11X_PCIE1_BASE
+#undef CP11X_PCIE2_BASE
 
 /*
  * Instantiate the slave CP110
  */
-#define CP110_NAME		cp1
-#define CP110_BASE		f4000000
-#define CP110_PCIE_IO_BASE	0xfd000000
-#define CP110_PCIE_MEM_BASE	0xfa000000
-#define CP110_PCIE0_BASE	f4600000
-#define CP110_PCIE1_BASE	f4620000
-#define CP110_PCIE2_BASE	f4640000
+#define CP11X_NAME		cp1
+#define CP11X_BASE		f4000000
+#define CP11X_PCIEx_MEM_BASE(iface) (0xfa000000 + (iface * 0x1000000))
+#define CP11X_PCIEx_MEM_SIZE(iface) 0xf00000
+#define CP11X_PCIE0_BASE	f4600000
+#define CP11X_PCIE1_BASE	f4620000
+#define CP11X_PCIE2_BASE	f4640000
 
 #include "armada-cp110.dtsi"
 
-#undef CP110_NAME
-#undef CP110_BASE
-#undef CP110_PCIE_IO_BASE
-#undef CP110_PCIE_MEM_BASE
-#undef CP110_PCIE0_BASE
-#undef CP110_PCIE1_BASE
-#undef CP110_PCIE2_BASE
+#undef CP11X_NAME
+#undef CP11X_BASE
+#undef CP11X_PCIEx_MEM_BASE
+#undef CP11X_PCIEx_MEM_SIZE
+#undef CP11X_PCIE0_BASE
+#undef CP11X_PCIE1_BASE
+#undef CP11X_PCIE2_BASE
 
 /* The 80x0 has two CP blocks, but uses only one block from each. */
 &cp1_gpio1 {
diff --git a/arch/arm64/boot/dts/marvell/armada-ap806-dual.dtsi b/arch/arm64/boot/dts/marvell/armada-ap806-dual.dtsi
index 9024a2d9db07..09849558a776 100644
--- a/arch/arm64/boot/dts/marvell/armada-ap806-dual.dtsi
+++ b/arch/arm64/boot/dts/marvell/armada-ap806-dual.dtsi
@@ -21,6 +21,14 @@
 			reg = <0x000>;
 			enable-method = "psci";
 			#cooling-cells = <2>;
+			clocks = <&cpu_clk 0>;
+			i-cache-size = <0xc000>;
+			i-cache-line-size = <64>;
+			i-cache-sets = <256>;
+			d-cache-size = <0x8000>;
+			d-cache-line-size = <64>;
+			d-cache-sets = <256>;
+			next-level-cache = <&l2>;
 		};
 		cpu1: cpu@1 {
 			device_type = "cpu";
@@ -28,6 +36,21 @@
 			reg = <0x001>;
 			enable-method = "psci";
 			#cooling-cells = <2>;
+			clocks = <&cpu_clk 0>;
+			i-cache-size = <0xc000>;
+			i-cache-line-size = <64>;
+			i-cache-sets = <256>;
+			d-cache-size = <0x8000>;
+			d-cache-line-size = <64>;
+			d-cache-sets = <256>;
+			next-level-cache = <&l2>;
+		};
+
+		l2: l2-cache {
+			compatible = "cache";
+			cache-size = <0x80000>;
+			cache-line-size = <64>;
+			cache-sets = <512>;
 		};
 	};
 };
diff --git a/arch/arm64/boot/dts/marvell/armada-ap806-quad.dtsi b/arch/arm64/boot/dts/marvell/armada-ap806-quad.dtsi
index c25bc65727b5..3db427122f9e 100644
--- a/arch/arm64/boot/dts/marvell/armada-ap806-quad.dtsi
+++ b/arch/arm64/boot/dts/marvell/armada-ap806-quad.dtsi
@@ -22,6 +22,13 @@
 			enable-method = "psci";
 			#cooling-cells = <2>;
 			clocks = <&cpu_clk 0>;
+			i-cache-size = <0xc000>;
+			i-cache-line-size = <64>;
+			i-cache-sets = <256>;
+			d-cache-size = <0x8000>;
+			d-cache-line-size = <64>;
+			d-cache-sets = <256>;
+			next-level-cache = <&l2_0>;
 		};
 		cpu1: cpu@1 {
 			device_type = "cpu";
@@ -30,6 +37,13 @@
 			enable-method = "psci";
 			#cooling-cells = <2>;
 			clocks = <&cpu_clk 0>;
+			i-cache-size = <0xc000>;
+			i-cache-line-size = <64>;
+			i-cache-sets = <256>;
+			d-cache-size = <0x8000>;
+			d-cache-line-size = <64>;
+			d-cache-sets = <256>;
+			next-level-cache = <&l2_0>;
 		};
 		cpu2: cpu@100 {
 			device_type = "cpu";
@@ -38,6 +52,13 @@
 			enable-method = "psci";
 			#cooling-cells = <2>;
 			clocks = <&cpu_clk 1>;
+			i-cache-size = <0xc000>;
+			i-cache-line-size = <64>;
+			i-cache-sets = <256>;
+			d-cache-size = <0x8000>;
+			d-cache-line-size = <64>;
+			d-cache-sets = <256>;
+			next-level-cache = <&l2_1>;
 		};
 		cpu3: cpu@101 {
 			device_type = "cpu";
@@ -46,6 +67,27 @@
 			enable-method = "psci";
 			#cooling-cells = <2>;
 			clocks = <&cpu_clk 1>;
+			i-cache-size = <0xc000>;
+			i-cache-line-size = <64>;
+			i-cache-sets = <256>;
+			d-cache-size = <0x8000>;
+			d-cache-line-size = <64>;
+			d-cache-sets = <256>;
+			next-level-cache = <&l2_1>;
+		};
+
+		l2_0: l2-cache0 {
+			compatible = "cache";
+			cache-size = <0x80000>;
+			cache-line-size = <64>;
+			cache-sets = <512>;
+		};
+
+		l2_1: l2-cache1 {
+			compatible = "cache";
+			cache-size = <0x80000>;
+			cache-line-size = <64>;
+			cache-sets = <512>;
 		};
 	};
 };
diff --git a/arch/arm64/boot/dts/marvell/armada-ap806.dtsi b/arch/arm64/boot/dts/marvell/armada-ap806.dtsi
index d06dd198f2c7..866628679ac7 100644
--- a/arch/arm64/boot/dts/marvell/armada-ap806.dtsi
+++ b/arch/arm64/boot/dts/marvell/armada-ap806.dtsi
@@ -5,454 +5,26 @@
  * Device Tree file for Marvell Armada AP806.
  */
 
-#include <dt-bindings/interrupt-controller/arm-gic.h>
-#include <dt-bindings/thermal/thermal.h>
-
-/dts-v1/;
+#define AP_NAME		ap806
+#include "armada-ap80x.dtsi"
 
 / {
 	model = "Marvell Armada AP806";
 	compatible = "marvell,armada-ap806";
-	#address-cells = <2>;
-	#size-cells = <2>;
-
-	aliases {
-		serial0 = &uart0;
-		serial1 = &uart1;
-		gpio0 = &ap_gpio;
-		spi0 = &spi0;
-	};
-
-	psci {
-		compatible = "arm,psci-0.2";
-		method = "smc";
-	};
-
-	reserved-memory {
-		#address-cells = <2>;
-		#size-cells = <2>;
-		ranges;
-
-		/*
-		 * This area matches the mapping done with a
-		 * mainline U-Boot, and should be updated by the
-		 * bootloader.
-		 */
-
-		psci-area@4000000 {
-			reg = <0x0 0x4000000 0x0 0x200000>;
-			no-map;
-		};
-	};
-
-	ap806 {
-		#address-cells = <2>;
-		#size-cells = <2>;
-		compatible = "simple-bus";
-		interrupt-parent = <&gic>;
-		ranges;
-
-		config-space@f0000000 {
-			#address-cells = <1>;
-			#size-cells = <1>;
-			compatible = "simple-bus";
-			ranges = <0x0 0x0 0xf0000000 0x1000000>;
-
-			gic: interrupt-controller@210000 {
-				compatible = "arm,gic-400";
-				#interrupt-cells = <3>;
-				#address-cells = <1>;
-				#size-cells = <1>;
-				ranges;
-				interrupt-controller;
-				interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>;
-				reg = <0x210000 0x10000>,
-				      <0x220000 0x20000>,
-				      <0x240000 0x20000>,
-				      <0x260000 0x20000>;
-
-				gic_v2m0: v2m@280000 {
-					compatible = "arm,gic-v2m-frame";
-					msi-controller;
-					reg = <0x280000 0x1000>;
-					arm,msi-base-spi = <160>;
-					arm,msi-num-spis = <32>;
-				};
-				gic_v2m1: v2m@290000 {
-					compatible = "arm,gic-v2m-frame";
-					msi-controller;
-					reg = <0x290000 0x1000>;
-					arm,msi-base-spi = <192>;
-					arm,msi-num-spis = <32>;
-				};
-				gic_v2m2: v2m@2a0000 {
-					compatible = "arm,gic-v2m-frame";
-					msi-controller;
-					reg = <0x2a0000 0x1000>;
-					arm,msi-base-spi = <224>;
-					arm,msi-num-spis = <32>;
-				};
-				gic_v2m3: v2m@2b0000 {
-					compatible = "arm,gic-v2m-frame";
-					msi-controller;
-					reg = <0x2b0000 0x1000>;
-					arm,msi-base-spi = <256>;
-					arm,msi-num-spis = <32>;
-				};
-			};
-
-			timer {
-				compatible = "arm,armv8-timer";
-				interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
-					     <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
-					     <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
-					     <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>;
-			};
-
-			pmu {
-				compatible = "arm,cortex-a72-pmu";
-				interrupt-parent = <&pic>;
-				interrupts = <17>;
-			};
-
-			odmi: odmi@300000 {
-				compatible = "marvell,odmi-controller";
-				interrupt-controller;
-				msi-controller;
-				marvell,odmi-frames = <4>;
-				reg = <0x300000 0x4000>,
-				      <0x304000 0x4000>,
-				      <0x308000 0x4000>,
-				      <0x30C000 0x4000>;
-				marvell,spi-base = <128>, <136>, <144>, <152>;
-			};
-
-			gicp: gicp@3f0040 {
-				compatible = "marvell,ap806-gicp";
-				reg = <0x3f0040 0x10>;
-				marvell,spi-ranges = <64 64>, <288 64>;
-				msi-controller;
-			};
-
-			pic: interrupt-controller@3f0100 {
-				compatible = "marvell,armada-8k-pic";
-				reg = <0x3f0100 0x10>;
-				#interrupt-cells = <1>;
-				interrupt-controller;
-				interrupts = <GIC_PPI 15 IRQ_TYPE_LEVEL_HIGH>;
-			};
-
-			sei: interrupt-controller@3f0200 {
-				compatible = "marvell,ap806-sei";
-				reg = <0x3f0200 0x40>;
-				interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>;
-				#interrupt-cells = <1>;
-				interrupt-controller;
-				msi-controller;
-			};
-
-			xor@400000 {
-				compatible = "marvell,armada-7k-xor", "marvell,xor-v2";
-				reg = <0x400000 0x1000>,
-				      <0x410000 0x1000>;
-				msi-parent = <&gic_v2m0>;
-				clocks = <&ap_clk 3>;
-				dma-coherent;
-			};
-
-			xor@420000 {
-				compatible = "marvell,armada-7k-xor", "marvell,xor-v2";
-				reg = <0x420000 0x1000>,
-				      <0x430000 0x1000>;
-				msi-parent = <&gic_v2m0>;
-				clocks = <&ap_clk 3>;
-				dma-coherent;
-			};
-
-			xor@440000 {
-				compatible = "marvell,armada-7k-xor", "marvell,xor-v2";
-				reg = <0x440000 0x1000>,
-				      <0x450000 0x1000>;
-				msi-parent = <&gic_v2m0>;
-				clocks = <&ap_clk 3>;
-				dma-coherent;
-			};
-
-			xor@460000 {
-				compatible = "marvell,armada-7k-xor", "marvell,xor-v2";
-				reg = <0x460000 0x1000>,
-				      <0x470000 0x1000>;
-				msi-parent = <&gic_v2m0>;
-				clocks = <&ap_clk 3>;
-				dma-coherent;
-			};
-
-			spi0: spi@510600 {
-				compatible = "marvell,armada-380-spi";
-				reg = <0x510600 0x50>;
-				#address-cells = <1>;
-				#size-cells = <0>;
-				interrupts = <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&ap_clk 3>;
-				status = "disabled";
-			};
-
-			i2c0: i2c@511000 {
-				compatible = "marvell,mv78230-i2c";
-				reg = <0x511000 0x20>;
-				#address-cells = <1>;
-				#size-cells = <0>;
-				interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>;
-				timeout-ms = <1000>;
-				clocks = <&ap_clk 3>;
-				status = "disabled";
-			};
-
-			uart0: serial@512000 {
-				compatible = "snps,dw-apb-uart";
-				reg = <0x512000 0x100>;
-				reg-shift = <2>;
-				interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>;
-				reg-io-width = <1>;
-				clocks = <&ap_clk 3>;
-				status = "disabled";
-			};
-
-			uart1: serial@512100 {
-				compatible = "snps,dw-apb-uart";
-				reg = <0x512100 0x100>;
-				reg-shift = <2>;
-				interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>;
-				reg-io-width = <1>;
-				clocks = <&ap_clk 3>;
-				status = "disabled";
-
-			};
-
-			watchdog: watchdog@610000 {
-				compatible = "arm,sbsa-gwdt";
-				reg = <0x610000 0x1000>, <0x600000 0x1000>;
-				interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>;
-			};
-
-			ap_sdhci0: sdhci@6e0000 {
-				compatible = "marvell,armada-ap806-sdhci";
-				reg = <0x6e0000 0x300>;
-				interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>;
-				clock-names = "core";
-				clocks = <&ap_clk 4>;
-				dma-coherent;
-				marvell,xenon-phy-slow-mode;
-				status = "disabled";
-			};
-
-			ap_syscon: system-controller@6f4000 {
-				compatible = "syscon", "simple-mfd";
-				reg = <0x6f4000 0x2000>;
-
-				ap_clk: clock {
-					compatible = "marvell,ap806-clock";
-					#clock-cells = <1>;
-				};
-
-				ap_pinctrl: pinctrl {
-					compatible = "marvell,ap806-pinctrl";
-
-					uart0_pins: uart0-pins {
-						marvell,pins = "mpp11", "mpp19";
-						marvell,function = "uart0";
-					};
-				};
-
-				ap_gpio: gpio@1040 {
-					compatible = "marvell,armada-8k-gpio";
-					offset = <0x1040>;
-					ngpios = <20>;
-					gpio-controller;
-					#gpio-cells = <2>;
-					gpio-ranges = <&ap_pinctrl 0 0 20>;
-				};
-			};
-
-			ap_syscon1: system-controller@6f8000 {
-				compatible = "syscon", "simple-mfd";
-				reg = <0x6f8000 0x1000>;
-				#address-cells = <1>;
-				#size-cells = <1>;
-
-				cpu_clk: clock-cpu@278 {
-					compatible = "marvell,ap806-cpu-clock";
-					clocks = <&ap_clk 0>, <&ap_clk 1>;
-					#clock-cells = <1>;
-					reg = <0x278 0xa30>;
-				};
+};
 
-				ap_thermal: thermal-sensor@80 {
-					compatible = "marvell,armada-ap806-thermal";
-					reg = <0x80 0x10>;
-					interrupt-parent = <&sei>;
-					interrupts = <18>;
-					#thermal-sensor-cells = <1>;
-				};
-			};
-		};
+&ap_syscon0 {
+	ap_clk: clock {
+		compatible = "marvell,ap806-clock";
+		#clock-cells = <1>;
 	};
+};
 
-	/*
-	 * The thermal IP features one internal sensor plus, if applicable, one
-	 * remote channel wired to one sensor per CPU.
-	 *
-	 * Only one thermal zone per AP/CP may trigger interrupts at a time, the
-	 * first one that will have a critical trip point will be chosen.
-	 */
-	thermal-zones {
-		ap_thermal_ic: ap-thermal-ic {
-			polling-delay-passive = <0>; /* Interrupt driven */
-			polling-delay = <0>; /* Interrupt driven */
-
-			thermal-sensors = <&ap_thermal 0>;
-
-			trips {
-				ap_crit: ap-crit {
-					temperature = <100000>; /* mC degrees */
-					hysteresis = <2000>; /* mC degrees */
-					type = "critical";
-				};
-			};
-
-			cooling-maps { };
-		};
-
-		ap_thermal_cpu0: ap-thermal-cpu0 {
-			polling-delay-passive = <1000>;
-			polling-delay = <1000>;
-
-			thermal-sensors = <&ap_thermal 1>;
-
-			trips {
-				cpu0_hot: cpu0-hot {
-					temperature = <85000>;
-					hysteresis = <2000>;
-					type = "passive";
-				};
-				cpu0_emerg: cpu0-emerg {
-					temperature = <95000>;
-					hysteresis = <2000>;
-					type = "passive";
-				};
-			};
-
-			cooling-maps {
-				map0_hot: map0-hot {
-					trip = <&cpu0_hot>;
-					cooling-device = <&cpu0 1 2>,
-						<&cpu1 1 2>;
-				};
-				map0_emerg: map0-ermerg {
-					trip = <&cpu0_emerg>;
-					cooling-device = <&cpu0 3 3>,
-						<&cpu1 3 3>;
-				};
-			};
-		};
-
-		ap_thermal_cpu1: ap-thermal-cpu1 {
-			polling-delay-passive = <1000>;
-			polling-delay = <1000>;
-
-			thermal-sensors = <&ap_thermal 2>;
-
-			trips {
-				cpu1_hot: cpu1-hot {
-					temperature = <85000>;
-					hysteresis = <2000>;
-					type = "passive";
-				};
-				cpu1_emerg: cpu1-emerg {
-					temperature = <95000>;
-					hysteresis = <2000>;
-					type = "passive";
-				};
-			};
-
-			cooling-maps {
-				map1_hot: map1-hot {
-					trip = <&cpu1_hot>;
-					cooling-device = <&cpu0 1 2>,
-						<&cpu1 1 2>;
-				};
-				map1_emerg: map1-emerg {
-					trip = <&cpu1_emerg>;
-					cooling-device = <&cpu0 3 3>,
-						<&cpu1 3 3>;
-				};
-			};
-		};
-
-		ap_thermal_cpu2: ap-thermal-cpu2 {
-			polling-delay-passive = <1000>;
-			polling-delay = <1000>;
-
-			thermal-sensors = <&ap_thermal 3>;
-
-			trips {
-				cpu2_hot: cpu2-hot {
-					temperature = <85000>;
-					hysteresis = <2000>;
-					type = "passive";
-				};
-				cpu2_emerg: cpu2-emerg {
-					temperature = <95000>;
-					hysteresis = <2000>;
-					type = "passive";
-				};
-			};
-
-			cooling-maps {
-				map2_hot: map2-hot {
-					trip = <&cpu2_hot>;
-					cooling-device = <&cpu2 1 2>,
-						<&cpu3 1 2>;
-				};
-				map2_emerg: map2-emerg {
-					trip = <&cpu2_emerg>;
-					cooling-device = <&cpu2 3 3>,
-						<&cpu3 3 3>;
-				};
-			};
-		};
-
-		ap_thermal_cpu3: ap-thermal-cpu3 {
-			polling-delay-passive = <1000>;
-			polling-delay = <1000>;
-
-			thermal-sensors = <&ap_thermal 4>;
-
-			trips {
-				cpu3_hot: cpu3-hot {
-					temperature = <85000>;
-					hysteresis = <2000>;
-					type = "passive";
-				};
-				cpu3_emerg: cpu3-emerg {
-					temperature = <95000>;
-					hysteresis = <2000>;
-					type = "passive";
-				};
-			};
-
-			cooling-maps {
-				map3_hot: map3-bhot {
-					trip = <&cpu3_hot>;
-					cooling-device = <&cpu2 1 2>,
-						<&cpu3 1 2>;
-				};
-				map3_emerg: map3-emerg {
-					trip = <&cpu3_emerg>;
-					cooling-device = <&cpu2 3 3>,
-						<&cpu3 3 3>;
-				};
-			};
-		};
+&ap_syscon1 {
+	cpu_clk: clock-cpu@278 {
+		compatible = "marvell,ap806-cpu-clock";
+		clocks = <&ap_clk 0>, <&ap_clk 1>;
+		#clock-cells = <1>;
+		reg = <0x278 0xa30>;
 	};
 };
diff --git a/arch/arm64/boot/dts/marvell/armada-ap807-quad.dtsi b/arch/arm64/boot/dts/marvell/armada-ap807-quad.dtsi
new file mode 100644
index 000000000000..840466e143b4
--- /dev/null
+++ b/arch/arm64/boot/dts/marvell/armada-ap807-quad.dtsi
@@ -0,0 +1,93 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Device Tree file for Marvell Armada AP807 Quad
+ *
+ * Copyright (C) 2019 Marvell Technology Group Ltd.
+ */
+
+#include "armada-ap807.dtsi"
+
+/ {
+	model = "Marvell Armada AP807 Quad";
+	compatible = "marvell,armada-ap807-quad", "marvell,armada-ap807";
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu0: cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a72", "arm,armv8";
+			reg = <0x000>;
+			enable-method = "psci";
+			#cooling-cells = <2>;
+			clocks = <&cpu_clk 0>;
+			i-cache-size = <0xc000>;
+			i-cache-line-size = <64>;
+			i-cache-sets = <256>;
+			d-cache-size = <0x8000>;
+			d-cache-line-size = <64>;
+			d-cache-sets = <256>;
+			next-level-cache = <&l2_0>;
+		};
+		cpu1: cpu@1 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a72", "arm,armv8";
+			reg = <0x001>;
+			enable-method = "psci";
+			#cooling-cells = <2>;
+			clocks = <&cpu_clk 0>;
+			i-cache-size = <0xc000>;
+			i-cache-line-size = <64>;
+			i-cache-sets = <256>;
+			d-cache-size = <0x8000>;
+			d-cache-line-size = <64>;
+			d-cache-sets = <256>;
+			next-level-cache = <&l2_0>;
+		};
+		cpu2: cpu@100 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a72", "arm,armv8";
+			reg = <0x100>;
+			enable-method = "psci";
+			#cooling-cells = <2>;
+			clocks = <&cpu_clk 1>;
+			i-cache-size = <0xc000>;
+			i-cache-line-size = <64>;
+			i-cache-sets = <256>;
+			d-cache-size = <0x8000>;
+			d-cache-line-size = <64>;
+			d-cache-sets = <256>;
+			next-level-cache = <&l2_1>;
+		};
+		cpu3: cpu@101 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a72", "arm,armv8";
+			reg = <0x101>;
+			enable-method = "psci";
+			#cooling-cells = <2>;
+			clocks = <&cpu_clk 1>;
+			i-cache-size = <0xc000>;
+			i-cache-line-size = <64>;
+			i-cache-sets = <256>;
+			d-cache-size = <0x8000>;
+			d-cache-line-size = <64>;
+			d-cache-sets = <256>;
+			next-level-cache = <&l2_1>;
+		};
+
+		l2_0: l2-cache0 {
+			compatible = "cache";
+			cache-size = <0x80000>;
+			cache-line-size = <64>;
+			cache-sets = <512>;
+		};
+
+		l2_1: l2-cache1 {
+			compatible = "cache";
+			cache-size = <0x80000>;
+			cache-line-size = <64>;
+			cache-sets = <512>;
+		};
+	};
+};
diff --git a/arch/arm64/boot/dts/marvell/armada-ap807.dtsi b/arch/arm64/boot/dts/marvell/armada-ap807.dtsi
new file mode 100644
index 000000000000..623010f3ca89
--- /dev/null
+++ b/arch/arm64/boot/dts/marvell/armada-ap807.dtsi
@@ -0,0 +1,29 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Device Tree file for Marvell Armada AP807
+ *
+ * Copyright (C) 2019 Marvell Technology Group Ltd.
+ */
+
+#define AP_NAME		ap807
+#include "armada-ap80x.dtsi"
+
+/ {
+	model = "Marvell Armada AP807";
+	compatible = "marvell,armada-ap807";
+};
+
+&ap_syscon0 {
+	ap_clk: clock {
+		compatible = "marvell,ap807-clock";
+		#clock-cells = <1>;
+	};
+};
+
+&ap_syscon1 {
+	cpu_clk: clock-cpu {
+		compatible = "marvell,ap807-cpu-clock";
+		clocks = <&ap_clk 0>, <&ap_clk 1>;
+		#clock-cells = <1>;
+	};
+};
diff --git a/arch/arm64/boot/dts/marvell/armada-ap80x.dtsi b/arch/arm64/boot/dts/marvell/armada-ap80x.dtsi
new file mode 100644
index 000000000000..e7438c21ccee
--- /dev/null
+++ b/arch/arm64/boot/dts/marvell/armada-ap80x.dtsi
@@ -0,0 +1,444 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (C) 2019 Marvell Technology Group Ltd.
+ *
+ * Device Tree file for Marvell Armada AP80x.
+ */
+
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/thermal/thermal.h>
+
+/dts-v1/;
+
+/ {
+	#address-cells = <2>;
+	#size-cells = <2>;
+
+	aliases {
+		serial0 = &uart0;
+		serial1 = &uart1;
+		gpio0 = &ap_gpio;
+		spi0 = &spi0;
+	};
+
+	psci {
+		compatible = "arm,psci-0.2";
+		method = "smc";
+	};
+
+	reserved-memory {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		/*
+		 * This area matches the mapping done with a
+		 * mainline U-Boot, and should be updated by the
+		 * bootloader.
+		 */
+
+		psci-area@4000000 {
+			reg = <0x0 0x4000000 0x0 0x200000>;
+			no-map;
+		};
+	};
+
+	AP_NAME {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		compatible = "simple-bus";
+		interrupt-parent = <&gic>;
+		ranges;
+
+		config-space@f0000000 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "simple-bus";
+			ranges = <0x0 0x0 0xf0000000 0x1000000>;
+
+			gic: interrupt-controller@210000 {
+				compatible = "arm,gic-400";
+				#interrupt-cells = <3>;
+				#address-cells = <1>;
+				#size-cells = <1>;
+				ranges;
+				interrupt-controller;
+				interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>;
+				reg = <0x210000 0x10000>,
+				      <0x220000 0x20000>,
+				      <0x240000 0x20000>,
+				      <0x260000 0x20000>;
+
+				gic_v2m0: v2m@280000 {
+					compatible = "arm,gic-v2m-frame";
+					msi-controller;
+					reg = <0x280000 0x1000>;
+					arm,msi-base-spi = <160>;
+					arm,msi-num-spis = <32>;
+				};
+				gic_v2m1: v2m@290000 {
+					compatible = "arm,gic-v2m-frame";
+					msi-controller;
+					reg = <0x290000 0x1000>;
+					arm,msi-base-spi = <192>;
+					arm,msi-num-spis = <32>;
+				};
+				gic_v2m2: v2m@2a0000 {
+					compatible = "arm,gic-v2m-frame";
+					msi-controller;
+					reg = <0x2a0000 0x1000>;
+					arm,msi-base-spi = <224>;
+					arm,msi-num-spis = <32>;
+				};
+				gic_v2m3: v2m@2b0000 {
+					compatible = "arm,gic-v2m-frame";
+					msi-controller;
+					reg = <0x2b0000 0x1000>;
+					arm,msi-base-spi = <256>;
+					arm,msi-num-spis = <32>;
+				};
+			};
+
+			timer {
+				compatible = "arm,armv8-timer";
+				interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+					     <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+					     <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+					     <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>;
+			};
+
+			pmu {
+				compatible = "arm,cortex-a72-pmu";
+				interrupt-parent = <&pic>;
+				interrupts = <17>;
+			};
+
+			odmi: odmi@300000 {
+				compatible = "marvell,odmi-controller";
+				interrupt-controller;
+				msi-controller;
+				marvell,odmi-frames = <4>;
+				reg = <0x300000 0x4000>,
+				      <0x304000 0x4000>,
+				      <0x308000 0x4000>,
+				      <0x30C000 0x4000>;
+				marvell,spi-base = <128>, <136>, <144>, <152>;
+			};
+
+			gicp: gicp@3f0040 {
+				compatible = "marvell,ap806-gicp";
+				reg = <0x3f0040 0x10>;
+				marvell,spi-ranges = <64 64>, <288 64>;
+				msi-controller;
+			};
+
+			pic: interrupt-controller@3f0100 {
+				compatible = "marvell,armada-8k-pic";
+				reg = <0x3f0100 0x10>;
+				#interrupt-cells = <1>;
+				interrupt-controller;
+				interrupts = <GIC_PPI 15 IRQ_TYPE_LEVEL_HIGH>;
+			};
+
+			sei: interrupt-controller@3f0200 {
+				compatible = "marvell,ap806-sei";
+				reg = <0x3f0200 0x40>;
+				interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>;
+				#interrupt-cells = <1>;
+				interrupt-controller;
+				msi-controller;
+			};
+
+			xor@400000 {
+				compatible = "marvell,armada-7k-xor", "marvell,xor-v2";
+				reg = <0x400000 0x1000>,
+				      <0x410000 0x1000>;
+				msi-parent = <&gic_v2m0>;
+				clocks = <&ap_clk 3>;
+				dma-coherent;
+			};
+
+			xor@420000 {
+				compatible = "marvell,armada-7k-xor", "marvell,xor-v2";
+				reg = <0x420000 0x1000>,
+				      <0x430000 0x1000>;
+				msi-parent = <&gic_v2m0>;
+				clocks = <&ap_clk 3>;
+				dma-coherent;
+			};
+
+			xor@440000 {
+				compatible = "marvell,armada-7k-xor", "marvell,xor-v2";
+				reg = <0x440000 0x1000>,
+				      <0x450000 0x1000>;
+				msi-parent = <&gic_v2m0>;
+				clocks = <&ap_clk 3>;
+				dma-coherent;
+			};
+
+			xor@460000 {
+				compatible = "marvell,armada-7k-xor", "marvell,xor-v2";
+				reg = <0x460000 0x1000>,
+				      <0x470000 0x1000>;
+				msi-parent = <&gic_v2m0>;
+				clocks = <&ap_clk 3>;
+				dma-coherent;
+			};
+
+			spi0: spi@510600 {
+				compatible = "marvell,armada-380-spi";
+				reg = <0x510600 0x50>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				interrupts = <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&ap_clk 3>;
+				status = "disabled";
+			};
+
+			i2c0: i2c@511000 {
+				compatible = "marvell,mv78230-i2c";
+				reg = <0x511000 0x20>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>;
+				timeout-ms = <1000>;
+				clocks = <&ap_clk 3>;
+				status = "disabled";
+			};
+
+			uart0: serial@512000 {
+				compatible = "snps,dw-apb-uart";
+				reg = <0x512000 0x100>;
+				reg-shift = <2>;
+				interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>;
+				reg-io-width = <1>;
+				clocks = <&ap_clk 3>;
+				status = "disabled";
+			};
+
+			uart1: serial@512100 {
+				compatible = "snps,dw-apb-uart";
+				reg = <0x512100 0x100>;
+				reg-shift = <2>;
+				interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>;
+				reg-io-width = <1>;
+				clocks = <&ap_clk 3>;
+				status = "disabled";
+
+			};
+
+			watchdog: watchdog@610000 {
+				compatible = "arm,sbsa-gwdt";
+				reg = <0x610000 0x1000>, <0x600000 0x1000>;
+				interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>;
+			};
+
+			ap_sdhci0: sdhci@6e0000 {
+				compatible = "marvell,armada-ap806-sdhci";
+				reg = <0x6e0000 0x300>;
+				interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>;
+				clock-names = "core";
+				clocks = <&ap_clk 4>;
+				dma-coherent;
+				marvell,xenon-phy-slow-mode;
+				status = "disabled";
+			};
+
+			ap_syscon0: system-controller@6f4000 {
+				compatible = "syscon", "simple-mfd";
+				reg = <0x6f4000 0x2000>;
+
+				ap_pinctrl: pinctrl {
+					compatible = "marvell,ap806-pinctrl";
+
+					uart0_pins: uart0-pins {
+						marvell,pins = "mpp11", "mpp19";
+						marvell,function = "uart0";
+					};
+				};
+
+				ap_gpio: gpio@1040 {
+					compatible = "marvell,armada-8k-gpio";
+					offset = <0x1040>;
+					ngpios = <20>;
+					gpio-controller;
+					#gpio-cells = <2>;
+					gpio-ranges = <&ap_pinctrl 0 0 20>;
+				};
+			};
+
+			ap_syscon1: system-controller@6f8000 {
+				compatible = "syscon", "simple-mfd";
+				reg = <0x6f8000 0x1000>;
+				#address-cells = <1>;
+				#size-cells = <1>;
+
+				ap_thermal: thermal-sensor@80 {
+					compatible = "marvell,armada-ap806-thermal";
+					reg = <0x80 0x10>;
+					interrupt-parent = <&sei>;
+					interrupts = <18>;
+					#thermal-sensor-cells = <1>;
+				};
+			};
+		};
+	};
+
+	/*
+	 * The thermal IP features one internal sensor plus, if applicable, one
+	 * remote channel wired to one sensor per CPU.
+	 *
+	 * Only one thermal zone per AP/CP may trigger interrupts at a time, the
+	 * first one that will have a critical trip point will be chosen.
+	 */
+	thermal-zones {
+		ap_thermal_ic: ap-thermal-ic {
+			polling-delay-passive = <0>; /* Interrupt driven */
+			polling-delay = <0>; /* Interrupt driven */
+
+			thermal-sensors = <&ap_thermal 0>;
+
+			trips {
+				ap_crit: ap-crit {
+					temperature = <100000>; /* mC degrees */
+					hysteresis = <2000>; /* mC degrees */
+					type = "critical";
+				};
+			};
+
+			cooling-maps { };
+		};
+
+		ap_thermal_cpu0: ap-thermal-cpu0 {
+			polling-delay-passive = <1000>;
+			polling-delay = <1000>;
+
+			thermal-sensors = <&ap_thermal 1>;
+
+			trips {
+				cpu0_hot: cpu0-hot {
+					temperature = <85000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+				cpu0_emerg: cpu0-emerg {
+					temperature = <95000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+			};
+
+			cooling-maps {
+				map0_hot: map0-hot {
+					trip = <&cpu0_hot>;
+					cooling-device = <&cpu0 1 2>,
+						<&cpu1 1 2>;
+				};
+				map0_emerg: map0-ermerg {
+					trip = <&cpu0_emerg>;
+					cooling-device = <&cpu0 3 3>,
+						<&cpu1 3 3>;
+				};
+			};
+		};
+
+		ap_thermal_cpu1: ap-thermal-cpu1 {
+			polling-delay-passive = <1000>;
+			polling-delay = <1000>;
+
+			thermal-sensors = <&ap_thermal 2>;
+
+			trips {
+				cpu1_hot: cpu1-hot {
+					temperature = <85000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+				cpu1_emerg: cpu1-emerg {
+					temperature = <95000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+			};
+
+			cooling-maps {
+				map1_hot: map1-hot {
+					trip = <&cpu1_hot>;
+					cooling-device = <&cpu0 1 2>,
+						<&cpu1 1 2>;
+				};
+				map1_emerg: map1-emerg {
+					trip = <&cpu1_emerg>;
+					cooling-device = <&cpu0 3 3>,
+						<&cpu1 3 3>;
+				};
+			};
+		};
+
+		ap_thermal_cpu2: ap-thermal-cpu2 {
+			polling-delay-passive = <1000>;
+			polling-delay = <1000>;
+
+			thermal-sensors = <&ap_thermal 3>;
+
+			trips {
+				cpu2_hot: cpu2-hot {
+					temperature = <85000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+				cpu2_emerg: cpu2-emerg {
+					temperature = <95000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+			};
+
+			cooling-maps {
+				map2_hot: map2-hot {
+					trip = <&cpu2_hot>;
+					cooling-device = <&cpu2 1 2>,
+						<&cpu3 1 2>;
+				};
+				map2_emerg: map2-emerg {
+					trip = <&cpu2_emerg>;
+					cooling-device = <&cpu2 3 3>,
+						<&cpu3 3 3>;
+				};
+			};
+		};
+
+		ap_thermal_cpu3: ap-thermal-cpu3 {
+			polling-delay-passive = <1000>;
+			polling-delay = <1000>;
+
+			thermal-sensors = <&ap_thermal 4>;
+
+			trips {
+				cpu3_hot: cpu3-hot {
+					temperature = <85000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+				cpu3_emerg: cpu3-emerg {
+					temperature = <95000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+			};
+
+			cooling-maps {
+				map3_hot: map3-bhot {
+					trip = <&cpu3_hot>;
+					cooling-device = <&cpu2 1 2>,
+						<&cpu3 1 2>;
+				};
+				map3_emerg: map3-emerg {
+					trip = <&cpu3_emerg>;
+					cooling-device = <&cpu2 3 3>,
+						<&cpu3 3 3>;
+				};
+			};
+		};
+	};
+};
diff --git a/arch/arm64/boot/dts/marvell/armada-common.dtsi b/arch/arm64/boot/dts/marvell/armada-common.dtsi
index b29c6405d214..c04c6c475022 100644
--- a/arch/arm64/boot/dts/marvell/armada-common.dtsi
+++ b/arch/arm64/boot/dts/marvell/armada-common.dtsi
@@ -6,6 +6,6 @@
 /* Common definitions used by Armada 7K/8K DTs */
 #define PASTER(x, y) x ## y
 #define EVALUATOR(x, y) PASTER(x, y)
-#define CP110_LABEL(name) EVALUATOR(CP110_NAME, EVALUATOR(_, name))
-#define CP110_NODE_NAME(name) EVALUATOR(CP110_NAME, EVALUATOR(-, name))
+#define CP11X_LABEL(name) EVALUATOR(CP11X_NAME, EVALUATOR(_, name))
+#define CP11X_NODE_NAME(name) EVALUATOR(CP11X_NAME, EVALUATOR(-, name))
 #define ADDRESSIFY(addr) EVALUATOR(0x, addr)
diff --git a/arch/arm64/boot/dts/marvell/armada-cp110.dtsi b/arch/arm64/boot/dts/marvell/armada-cp110.dtsi
index d81944902650..4fd33b0fa56e 100644
--- a/arch/arm64/boot/dts/marvell/armada-cp110.dtsi
+++ b/arch/arm64/boot/dts/marvell/armada-cp110.dtsi
@@ -1,579 +1,12 @@
 // SPDX-License-Identifier: (GPL-2.0+ OR MIT)
 /*
- * Copyright (C) 2016 Marvell Technology Group Ltd.
+ * Copyright (C) 2019 Marvell Technology Group Ltd.
  *
  * Device Tree file for Marvell Armada CP110.
  */
 
-#include <dt-bindings/interrupt-controller/mvebu-icu.h>
-#include <dt-bindings/thermal/thermal.h>
+#define CP11X_TYPE cp110
 
-#include "armada-common.dtsi"
+#include "armada-cp11x.dtsi"
 
-#define CP110_PCIEx_IO_BASE(iface)	(CP110_PCIE_IO_BASE + (iface *  0x10000))
-#define CP110_PCIEx_MEM_BASE(iface)	(CP110_PCIE_MEM_BASE + (iface *  0x1000000))
-#define CP110_PCIEx_CONF_BASE(iface)	(CP110_PCIEx_MEM_BASE(iface) + 0xf00000)
-
-/ {
-	/*
-	 * The contents of the node are defined below, in order to
-	 * save one indentation level
-	 */
-	CP110_NAME: CP110_NAME { };
-
-	/*
-	 * CPs only have one sensor in the thermal IC.
-	 *
-	 * The cooling maps are empty as there are no cooling devices.
-	 */
-	thermal-zones {
-		CP110_LABEL(thermal_ic): CP110_NODE_NAME(thermal-ic) {
-			polling-delay-passive = <0>; /* Interrupt driven */
-			polling-delay = <0>; /* Interrupt driven */
-
-			thermal-sensors = <&CP110_LABEL(thermal) 0>;
-
-			trips {
-				CP110_LABEL(crit): crit {
-					temperature = <100000>; /* mC degrees */
-					hysteresis = <2000>; /* mC degrees */
-					type = "critical";
-				};
-			};
-
-			cooling-maps { };
-		};
-	};
-};
-
-&CP110_NAME {
-	#address-cells = <2>;
-	#size-cells = <2>;
-	compatible = "simple-bus";
-	interrupt-parent = <&CP110_LABEL(icu_nsr)>;
-	ranges;
-
-	config-space@CP110_BASE {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		compatible = "simple-bus";
-		ranges = <0x0 0x0 ADDRESSIFY(CP110_BASE) 0x2000000>;
-
-		CP110_LABEL(ethernet): ethernet@0 {
-			compatible = "marvell,armada-7k-pp22";
-			reg = <0x0 0x100000>, <0x129000 0xb000>;
-			clocks = <&CP110_LABEL(clk) 1 3>, <&CP110_LABEL(clk) 1 9>,
-				 <&CP110_LABEL(clk) 1 5>, <&CP110_LABEL(clk) 1 6>,
-				 <&CP110_LABEL(clk) 1 18>;
-			clock-names = "pp_clk", "gop_clk",
-				      "mg_clk", "mg_core_clk", "axi_clk";
-			marvell,system-controller = <&CP110_LABEL(syscon0)>;
-			status = "disabled";
-			dma-coherent;
-
-			CP110_LABEL(eth0): eth0 {
-				interrupts = <39 IRQ_TYPE_LEVEL_HIGH>,
-					<43 IRQ_TYPE_LEVEL_HIGH>,
-					<47 IRQ_TYPE_LEVEL_HIGH>,
-					<51 IRQ_TYPE_LEVEL_HIGH>,
-					<55 IRQ_TYPE_LEVEL_HIGH>,
-					<59 IRQ_TYPE_LEVEL_HIGH>,
-					<63 IRQ_TYPE_LEVEL_HIGH>,
-					<67 IRQ_TYPE_LEVEL_HIGH>,
-					<71 IRQ_TYPE_LEVEL_HIGH>,
-					<129 IRQ_TYPE_LEVEL_HIGH>;
-				interrupt-names = "hif0", "hif1", "hif2",
-					"hif3", "hif4", "hif5", "hif6", "hif7",
-					"hif8", "link";
-				port-id = <0>;
-				gop-port-id = <0>;
-				status = "disabled";
-			};
-
-			CP110_LABEL(eth1): eth1 {
-				interrupts = <40 IRQ_TYPE_LEVEL_HIGH>,
-					<44 IRQ_TYPE_LEVEL_HIGH>,
-					<48 IRQ_TYPE_LEVEL_HIGH>,
-					<52 IRQ_TYPE_LEVEL_HIGH>,
-					<56 IRQ_TYPE_LEVEL_HIGH>,
-					<60 IRQ_TYPE_LEVEL_HIGH>,
-					<64 IRQ_TYPE_LEVEL_HIGH>,
-					<68 IRQ_TYPE_LEVEL_HIGH>,
-					<72 IRQ_TYPE_LEVEL_HIGH>,
-					<128 IRQ_TYPE_LEVEL_HIGH>;
-				interrupt-names = "hif0", "hif1", "hif2",
-					"hif3", "hif4", "hif5", "hif6", "hif7",
-					"hif8", "link";
-				port-id = <1>;
-				gop-port-id = <2>;
-				status = "disabled";
-			};
-
-			CP110_LABEL(eth2): eth2 {
-				interrupts = <41 IRQ_TYPE_LEVEL_HIGH>,
-					<45 IRQ_TYPE_LEVEL_HIGH>,
-					<49 IRQ_TYPE_LEVEL_HIGH>,
-					<53 IRQ_TYPE_LEVEL_HIGH>,
-					<57 IRQ_TYPE_LEVEL_HIGH>,
-					<61 IRQ_TYPE_LEVEL_HIGH>,
-					<65 IRQ_TYPE_LEVEL_HIGH>,
-					<69 IRQ_TYPE_LEVEL_HIGH>,
-					<73 IRQ_TYPE_LEVEL_HIGH>,
-					<127 IRQ_TYPE_LEVEL_HIGH>;
-				interrupt-names = "hif0", "hif1", "hif2",
-					"hif3", "hif4", "hif5", "hif6", "hif7",
-					"hif8", "link";
-				port-id = <2>;
-				gop-port-id = <3>;
-				status = "disabled";
-			};
-		};
-
-		CP110_LABEL(comphy): phy@120000 {
-			compatible = "marvell,comphy-cp110";
-			reg = <0x120000 0x6000>;
-			marvell,system-controller = <&CP110_LABEL(syscon0)>;
-			clocks = <&CP110_LABEL(clk) 1 5>, <&CP110_LABEL(clk) 1 6>,
-				 <&CP110_LABEL(clk) 1 18>;
-			clock-names = "mg_clk", "mg_core_clk", "axi_clk";
-			#address-cells = <1>;
-			#size-cells = <0>;
-
-			CP110_LABEL(comphy0): phy@0 {
-				reg = <0>;
-				#phy-cells = <1>;
-			};
-
-			CP110_LABEL(comphy1): phy@1 {
-				reg = <1>;
-				#phy-cells = <1>;
-			};
-
-			CP110_LABEL(comphy2): phy@2 {
-				reg = <2>;
-				#phy-cells = <1>;
-			};
-
-			CP110_LABEL(comphy3): phy@3 {
-				reg = <3>;
-				#phy-cells = <1>;
-			};
-
-			CP110_LABEL(comphy4): phy@4 {
-				reg = <4>;
-				#phy-cells = <1>;
-			};
-
-			CP110_LABEL(comphy5): phy@5 {
-				reg = <5>;
-				#phy-cells = <1>;
-			};
-		};
-
-		CP110_LABEL(mdio): mdio@12a200 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			compatible = "marvell,orion-mdio";
-			reg = <0x12a200 0x10>;
-			clocks = <&CP110_LABEL(clk) 1 9>, <&CP110_LABEL(clk) 1 5>,
-				 <&CP110_LABEL(clk) 1 6>, <&CP110_LABEL(clk) 1 18>;
-			status = "disabled";
-		};
-
-		CP110_LABEL(xmdio): mdio@12a600 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			compatible = "marvell,xmdio";
-			reg = <0x12a600 0x10>;
-			clocks = <&CP110_LABEL(clk) 1 5>,
-				 <&CP110_LABEL(clk) 1 6>, <&CP110_LABEL(clk) 1 18>;
-			status = "disabled";
-		};
-
-		CP110_LABEL(icu): interrupt-controller@1e0000 {
-			compatible = "marvell,cp110-icu";
-			reg = <0x1e0000 0x440>;
-			#address-cells = <1>;
-			#size-cells = <1>;
-
-			CP110_LABEL(icu_nsr): interrupt-controller@10 {
-				compatible = "marvell,cp110-icu-nsr";
-				reg = <0x10 0x20>;
-				#interrupt-cells = <2>;
-				interrupt-controller;
-				msi-parent = <&gicp>;
-			};
-
-			CP110_LABEL(icu_sei): interrupt-controller@50 {
-				compatible = "marvell,cp110-icu-sei";
-				reg = <0x50 0x10>;
-				#interrupt-cells = <2>;
-				interrupt-controller;
-				msi-parent = <&sei>;
-			};
-		};
-
-		CP110_LABEL(rtc): rtc@284000 {
-			compatible = "marvell,armada-8k-rtc";
-			reg = <0x284000 0x20>, <0x284080 0x24>;
-			reg-names = "rtc", "rtc-soc";
-			interrupts = <77 IRQ_TYPE_LEVEL_HIGH>;
-		};
-
-		CP110_LABEL(syscon0): system-controller@440000 {
-			compatible = "syscon", "simple-mfd";
-			reg = <0x440000 0x2000>;
-
-			CP110_LABEL(clk): clock {
-				compatible = "marvell,cp110-clock";
-				#clock-cells = <2>;
-			};
-
-			CP110_LABEL(gpio1): gpio@100 {
-				compatible = "marvell,armada-8k-gpio";
-				offset = <0x100>;
-				ngpios = <32>;
-				gpio-controller;
-				#gpio-cells = <2>;
-				gpio-ranges = <&CP110_LABEL(pinctrl) 0 0 32>;
-				interrupt-controller;
-				interrupts = <86 IRQ_TYPE_LEVEL_HIGH>,
-					<85 IRQ_TYPE_LEVEL_HIGH>,
-					<84 IRQ_TYPE_LEVEL_HIGH>,
-					<83 IRQ_TYPE_LEVEL_HIGH>;
-				#interrupt-cells = <2>;
-				status = "disabled";
-			};
-
-			CP110_LABEL(gpio2): gpio@140 {
-				compatible = "marvell,armada-8k-gpio";
-				offset = <0x140>;
-				ngpios = <31>;
-				gpio-controller;
-				#gpio-cells = <2>;
-				gpio-ranges = <&CP110_LABEL(pinctrl) 0 32 31>;
-				interrupt-controller;
-				interrupts = <82 IRQ_TYPE_LEVEL_HIGH>,
-					<81 IRQ_TYPE_LEVEL_HIGH>,
-					<80 IRQ_TYPE_LEVEL_HIGH>,
-					<79 IRQ_TYPE_LEVEL_HIGH>;
-				#interrupt-cells = <2>;
-				status = "disabled";
-			};
-		};
-
-		CP110_LABEL(syscon1): system-controller@400000 {
-			compatible = "syscon", "simple-mfd";
-			reg = <0x400000 0x1000>;
-			#address-cells = <1>;
-			#size-cells = <1>;
-
-			CP110_LABEL(thermal): thermal-sensor@70 {
-				compatible = "marvell,armada-cp110-thermal";
-				reg = <0x70 0x10>;
-				interrupts-extended =
-					<&CP110_LABEL(icu_sei) 116 IRQ_TYPE_LEVEL_HIGH>;
-				#thermal-sensor-cells = <1>;
-			};
-		};
-
-		CP110_LABEL(usb3_0): usb3@500000 {
-			compatible = "marvell,armada-8k-xhci",
-			"generic-xhci";
-			reg = <0x500000 0x4000>;
-			dma-coherent;
-			interrupts = <106 IRQ_TYPE_LEVEL_HIGH>;
-			clock-names = "core", "reg";
-			clocks = <&CP110_LABEL(clk) 1 22>,
-				 <&CP110_LABEL(clk) 1 16>;
-			status = "disabled";
-		};
-
-		CP110_LABEL(usb3_1): usb3@510000 {
-			compatible = "marvell,armada-8k-xhci",
-			"generic-xhci";
-			reg = <0x510000 0x4000>;
-			dma-coherent;
-			interrupts = <105 IRQ_TYPE_LEVEL_HIGH>;
-			clock-names = "core", "reg";
-			clocks = <&CP110_LABEL(clk) 1 23>,
-				 <&CP110_LABEL(clk) 1 16>;
-			status = "disabled";
-		};
-
-		CP110_LABEL(sata0): sata@540000 {
-			compatible = "marvell,armada-8k-ahci",
-			"generic-ahci";
-			reg = <0x540000 0x30000>;
-			dma-coherent;
-			interrupts = <107 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&CP110_LABEL(clk) 1 15>,
-				 <&CP110_LABEL(clk) 1 16>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-			status = "disabled";
-
-			sata-port@0 {
-				reg = <0>;
-			};
-
-			sata-port@1 {
-				reg = <1>;
-			};
-		};
-
-		CP110_LABEL(xor0): xor@6a0000 {
-			compatible = "marvell,armada-7k-xor", "marvell,xor-v2";
-			reg = <0x6a0000 0x1000>, <0x6b0000 0x1000>;
-			dma-coherent;
-			msi-parent = <&gic_v2m0>;
-			clock-names = "core", "reg";
-			clocks = <&CP110_LABEL(clk) 1 8>,
-				 <&CP110_LABEL(clk) 1 14>;
-		};
-
-		CP110_LABEL(xor1): xor@6c0000 {
-			compatible = "marvell,armada-7k-xor", "marvell,xor-v2";
-			reg = <0x6c0000 0x1000>, <0x6d0000 0x1000>;
-			dma-coherent;
-			msi-parent = <&gic_v2m0>;
-			clock-names = "core", "reg";
-			clocks = <&CP110_LABEL(clk) 1 7>,
-				 <&CP110_LABEL(clk) 1 14>;
-		};
-
-		CP110_LABEL(spi0): spi@700600 {
-			compatible = "marvell,armada-380-spi";
-			reg = <0x700600 0x50>;
-			#address-cells = <0x1>;
-			#size-cells = <0x0>;
-			clock-names = "core", "axi";
-			clocks = <&CP110_LABEL(clk) 1 21>,
-				 <&CP110_LABEL(clk) 1 17>;
-			status = "disabled";
-		};
-
-		CP110_LABEL(spi1): spi@700680 {
-			compatible = "marvell,armada-380-spi";
-			reg = <0x700680 0x50>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-			clock-names = "core", "axi";
-			clocks = <&CP110_LABEL(clk) 1 21>,
-				 <&CP110_LABEL(clk) 1 17>;
-			status = "disabled";
-		};
-
-		CP110_LABEL(i2c0): i2c@701000 {
-			compatible = "marvell,mv78230-i2c";
-			reg = <0x701000 0x20>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-			interrupts = <120 IRQ_TYPE_LEVEL_HIGH>;
-			clock-names = "core", "reg";
-			clocks = <&CP110_LABEL(clk) 1 21>,
-				 <&CP110_LABEL(clk) 1 17>;
-			status = "disabled";
-		};
-
-		CP110_LABEL(i2c1): i2c@701100 {
-			compatible = "marvell,mv78230-i2c";
-			reg = <0x701100 0x20>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-			interrupts = <121 IRQ_TYPE_LEVEL_HIGH>;
-			clock-names = "core", "reg";
-			clocks = <&CP110_LABEL(clk) 1 21>,
-				 <&CP110_LABEL(clk) 1 17>;
-			status = "disabled";
-		};
-
-		CP110_LABEL(uart0): serial@702000 {
-			compatible = "snps,dw-apb-uart";
-			reg = <0x702000 0x100>;
-			reg-shift = <2>;
-			interrupts = <122 IRQ_TYPE_LEVEL_HIGH>;
-			reg-io-width = <1>;
-			clock-names = "baudclk", "apb_pclk";
-			clocks = <&CP110_LABEL(clk) 1 21>,
-				 <&CP110_LABEL(clk) 1 17>;
-			status = "disabled";
-		};
-
-		CP110_LABEL(uart1): serial@702100 {
-			compatible = "snps,dw-apb-uart";
-			reg = <0x702100 0x100>;
-			reg-shift = <2>;
-			interrupts = <123 IRQ_TYPE_LEVEL_HIGH>;
-			reg-io-width = <1>;
-			clock-names = "baudclk", "apb_pclk";
-			clocks = <&CP110_LABEL(clk) 1 21>,
-				 <&CP110_LABEL(clk) 1 17>;
-			status = "disabled";
-		};
-
-		CP110_LABEL(uart2): serial@702200 {
-			compatible = "snps,dw-apb-uart";
-			reg = <0x702200 0x100>;
-			reg-shift = <2>;
-			interrupts = <124 IRQ_TYPE_LEVEL_HIGH>;
-			reg-io-width = <1>;
-			clock-names = "baudclk", "apb_pclk";
-			clocks = <&CP110_LABEL(clk) 1 21>,
-				 <&CP110_LABEL(clk) 1 17>;
-			status = "disabled";
-		};
-
-		CP110_LABEL(uart3): serial@702300 {
-			compatible = "snps,dw-apb-uart";
-			reg = <0x702300 0x100>;
-			reg-shift = <2>;
-			interrupts = <125 IRQ_TYPE_LEVEL_HIGH>;
-			reg-io-width = <1>;
-			clock-names = "baudclk", "apb_pclk";
-			clocks = <&CP110_LABEL(clk) 1 21>,
-				 <&CP110_LABEL(clk) 1 17>;
-			status = "disabled";
-		};
-
-		CP110_LABEL(nand_controller): nand@720000 {
-			/*
-			* Due to the limitation of the pins available
-			* this controller is only usable on the CPM
-			* for A7K and on the CPS for A8K.
-			*/
-			compatible = "marvell,armada-8k-nand-controller",
-				"marvell,armada370-nand-controller";
-			reg = <0x720000 0x54>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-			interrupts = <115 IRQ_TYPE_LEVEL_HIGH>;
-			clock-names = "core", "reg";
-			clocks = <&CP110_LABEL(clk) 1 2>,
-				 <&CP110_LABEL(clk) 1 17>;
-			marvell,system-controller = <&CP110_LABEL(syscon0)>;
-			status = "disabled";
-		};
-
-		CP110_LABEL(trng): trng@760000 {
-			compatible = "marvell,armada-8k-rng",
-			"inside-secure,safexcel-eip76";
-			reg = <0x760000 0x7d>;
-			interrupts = <95 IRQ_TYPE_LEVEL_HIGH>;
-			clock-names = "core", "reg";
-			clocks = <&CP110_LABEL(clk) 1 25>,
-				 <&CP110_LABEL(clk) 1 17>;
-			status = "okay";
-		};
-
-		CP110_LABEL(sdhci0): sdhci@780000 {
-			compatible = "marvell,armada-cp110-sdhci";
-			reg = <0x780000 0x300>;
-			interrupts = <27 IRQ_TYPE_LEVEL_HIGH>;
-			clock-names = "core", "axi";
-			clocks = <&CP110_LABEL(clk) 1 4>, <&CP110_LABEL(clk) 1 18>;
-			dma-coherent;
-			status = "disabled";
-		};
-
-		CP110_LABEL(crypto): crypto@800000 {
-			compatible = "inside-secure,safexcel-eip197b";
-			reg = <0x800000 0x200000>;
-			interrupts = <87 IRQ_TYPE_LEVEL_HIGH>,
-				<88 IRQ_TYPE_LEVEL_HIGH>,
-				<89 IRQ_TYPE_LEVEL_HIGH>,
-				<90 IRQ_TYPE_LEVEL_HIGH>,
-				<91 IRQ_TYPE_LEVEL_HIGH>,
-				<92 IRQ_TYPE_LEVEL_HIGH>;
-			interrupt-names = "mem", "ring0", "ring1",
-				"ring2", "ring3", "eip";
-			clock-names = "core", "reg";
-			clocks = <&CP110_LABEL(clk) 1 26>,
-				 <&CP110_LABEL(clk) 1 17>;
-			dma-coherent;
-		};
-	};
-
-	CP110_LABEL(pcie0): pcie@CP110_PCIE0_BASE {
-		compatible = "marvell,armada8k-pcie", "snps,dw-pcie";
-		reg = <0 ADDRESSIFY(CP110_PCIE0_BASE) 0 0x10000>,
-		      <0 CP110_PCIEx_CONF_BASE(0) 0 0x80000>;
-		reg-names = "ctrl", "config";
-		#address-cells = <3>;
-		#size-cells = <2>;
-		#interrupt-cells = <1>;
-		device_type = "pci";
-		dma-coherent;
-		msi-parent = <&gic_v2m0>;
-
-		bus-range = <0 0xff>;
-		ranges =
-		/* downstream I/O */
-		<0x81000000 0 CP110_PCIEx_IO_BASE(0) 0  CP110_PCIEx_IO_BASE(0) 0 0x10000
-		/* non-prefetchable memory */
-		0x82000000 0 CP110_PCIEx_MEM_BASE(0) 0  CP110_PCIEx_MEM_BASE(0) 0 0xf00000>;
-		interrupt-map-mask = <0 0 0 0>;
-		interrupt-map = <0 0 0 0 &CP110_LABEL(icu_nsr) 22 IRQ_TYPE_LEVEL_HIGH>;
-		interrupts = <22 IRQ_TYPE_LEVEL_HIGH>;
-		num-lanes = <1>;
-		clock-names = "core", "reg";
-		clocks = <&CP110_LABEL(clk) 1 13>, <&CP110_LABEL(clk) 1 14>;
-		status = "disabled";
-	};
-
-	CP110_LABEL(pcie1): pcie@CP110_PCIE1_BASE {
-		compatible = "marvell,armada8k-pcie", "snps,dw-pcie";
-		reg = <0 ADDRESSIFY(CP110_PCIE1_BASE) 0 0x10000>,
-		      <0 CP110_PCIEx_CONF_BASE(1) 0 0x80000>;
-		reg-names = "ctrl", "config";
-		#address-cells = <3>;
-		#size-cells = <2>;
-		#interrupt-cells = <1>;
-		device_type = "pci";
-		dma-coherent;
-		msi-parent = <&gic_v2m0>;
-
-		bus-range = <0 0xff>;
-		ranges =
-		/* downstream I/O */
-		<0x81000000 0 CP110_PCIEx_IO_BASE(1) 0  CP110_PCIEx_IO_BASE(1) 0 0x10000
-		/* non-prefetchable memory */
-		0x82000000 0 CP110_PCIEx_MEM_BASE(1) 0  CP110_PCIEx_MEM_BASE(1) 0 0xf00000>;
-		interrupt-map-mask = <0 0 0 0>;
-		interrupt-map = <0 0 0 0 &CP110_LABEL(icu_nsr) 24 IRQ_TYPE_LEVEL_HIGH>;
-		interrupts = <24 IRQ_TYPE_LEVEL_HIGH>;
-
-		num-lanes = <1>;
-		clock-names = "core", "reg";
-		clocks = <&CP110_LABEL(clk) 1 11>, <&CP110_LABEL(clk) 1 14>;
-		status = "disabled";
-	};
-
-	CP110_LABEL(pcie2): pcie@CP110_PCIE2_BASE {
-		compatible = "marvell,armada8k-pcie", "snps,dw-pcie";
-		reg = <0 ADDRESSIFY(CP110_PCIE2_BASE) 0 0x10000>,
-		      <0 CP110_PCIEx_CONF_BASE(2) 0 0x80000>;
-		reg-names = "ctrl", "config";
-		#address-cells = <3>;
-		#size-cells = <2>;
-		#interrupt-cells = <1>;
-		device_type = "pci";
-		dma-coherent;
-		msi-parent = <&gic_v2m0>;
-
-		bus-range = <0 0xff>;
-		ranges =
-		/* downstream I/O */
-		<0x81000000 0 CP110_PCIEx_IO_BASE(2) 0  CP110_PCIEx_IO_BASE(2) 0 0x10000
-		/* non-prefetchable memory */
-		0x82000000 0 CP110_PCIEx_MEM_BASE(2) 0  CP110_PCIEx_MEM_BASE(2) 0 0xf00000>;
-		interrupt-map-mask = <0 0 0 0>;
-		interrupt-map = <0 0 0 0 &CP110_LABEL(icu_nsr) 23 IRQ_TYPE_LEVEL_HIGH>;
-		interrupts = <23 IRQ_TYPE_LEVEL_HIGH>;
-
-		num-lanes = <1>;
-		clock-names = "core", "reg";
-		clocks = <&CP110_LABEL(clk) 1 12>, <&CP110_LABEL(clk) 1 14>;
-		status = "disabled";
-	};
-};
+#undef CP11X_TYPE
diff --git a/arch/arm64/boot/dts/marvell/armada-cp115.dtsi b/arch/arm64/boot/dts/marvell/armada-cp115.dtsi
new file mode 100644
index 000000000000..1d0a9653e681
--- /dev/null
+++ b/arch/arm64/boot/dts/marvell/armada-cp115.dtsi
@@ -0,0 +1,12 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (C) 2019 Marvell Technology Group Ltd.
+ *
+ * Device Tree file for Marvell Armada CP115.
+ */
+
+#define CP11X_TYPE cp115
+
+#include "armada-cp11x.dtsi"
+
+#undef CP11X_TYPE
diff --git a/arch/arm64/boot/dts/marvell/armada-cp11x.dtsi b/arch/arm64/boot/dts/marvell/armada-cp11x.dtsi
new file mode 100644
index 000000000000..9dcf16beabf5
--- /dev/null
+++ b/arch/arm64/boot/dts/marvell/armada-cp11x.dtsi
@@ -0,0 +1,568 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (C) 2016 Marvell Technology Group Ltd.
+ *
+ * Device Tree file for Marvell Armada CP11x.
+ */
+
+#include <dt-bindings/interrupt-controller/mvebu-icu.h>
+#include <dt-bindings/thermal/thermal.h>
+
+#include "armada-common.dtsi"
+
+#define CP11X_PCIEx_CONF_BASE(iface)	(CP11X_PCIEx_MEM_BASE(iface) + CP11X_PCIEx_MEM_SIZE(iface))
+
+/ {
+	/*
+	 * The contents of the node are defined below, in order to
+	 * save one indentation level
+	 */
+	CP11X_NAME: CP11X_NAME { };
+
+	/*
+	 * CPs only have one sensor in the thermal IC.
+	 *
+	 * The cooling maps are empty as there are no cooling devices.
+	 */
+	thermal-zones {
+		CP11X_LABEL(thermal_ic): CP11X_NODE_NAME(thermal-ic) {
+			polling-delay-passive = <0>; /* Interrupt driven */
+			polling-delay = <0>; /* Interrupt driven */
+
+			thermal-sensors = <&CP11X_LABEL(thermal) 0>;
+
+			trips {
+				CP11X_LABEL(crit): crit {
+					temperature = <100000>; /* mC degrees */
+					hysteresis = <2000>; /* mC degrees */
+					type = "critical";
+				};
+			};
+
+			cooling-maps { };
+		};
+	};
+};
+
+&CP11X_NAME {
+	#address-cells = <2>;
+	#size-cells = <2>;
+	compatible = "simple-bus";
+	interrupt-parent = <&CP11X_LABEL(icu_nsr)>;
+	ranges;
+
+	config-space@CP11X_BASE {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "simple-bus";
+		ranges = <0x0 0x0 ADDRESSIFY(CP11X_BASE) 0x2000000>;
+
+		CP11X_LABEL(ethernet): ethernet@0 {
+			compatible = "marvell,armada-7k-pp22";
+			reg = <0x0 0x100000>, <0x129000 0xb000>;
+			clocks = <&CP11X_LABEL(clk) 1 3>, <&CP11X_LABEL(clk) 1 9>,
+				 <&CP11X_LABEL(clk) 1 5>, <&CP11X_LABEL(clk) 1 6>,
+				 <&CP11X_LABEL(clk) 1 18>;
+			clock-names = "pp_clk", "gop_clk",
+				      "mg_clk", "mg_core_clk", "axi_clk";
+			marvell,system-controller = <&CP11X_LABEL(syscon0)>;
+			status = "disabled";
+			dma-coherent;
+
+			CP11X_LABEL(eth0): eth0 {
+				interrupts = <39 IRQ_TYPE_LEVEL_HIGH>,
+					<43 IRQ_TYPE_LEVEL_HIGH>,
+					<47 IRQ_TYPE_LEVEL_HIGH>,
+					<51 IRQ_TYPE_LEVEL_HIGH>,
+					<55 IRQ_TYPE_LEVEL_HIGH>,
+					<59 IRQ_TYPE_LEVEL_HIGH>,
+					<63 IRQ_TYPE_LEVEL_HIGH>,
+					<67 IRQ_TYPE_LEVEL_HIGH>,
+					<71 IRQ_TYPE_LEVEL_HIGH>,
+					<129 IRQ_TYPE_LEVEL_HIGH>;
+				interrupt-names = "hif0", "hif1", "hif2",
+					"hif3", "hif4", "hif5", "hif6", "hif7",
+					"hif8", "link";
+				port-id = <0>;
+				gop-port-id = <0>;
+				status = "disabled";
+			};
+
+			CP11X_LABEL(eth1): eth1 {
+				interrupts = <40 IRQ_TYPE_LEVEL_HIGH>,
+					<44 IRQ_TYPE_LEVEL_HIGH>,
+					<48 IRQ_TYPE_LEVEL_HIGH>,
+					<52 IRQ_TYPE_LEVEL_HIGH>,
+					<56 IRQ_TYPE_LEVEL_HIGH>,
+					<60 IRQ_TYPE_LEVEL_HIGH>,
+					<64 IRQ_TYPE_LEVEL_HIGH>,
+					<68 IRQ_TYPE_LEVEL_HIGH>,
+					<72 IRQ_TYPE_LEVEL_HIGH>,
+					<128 IRQ_TYPE_LEVEL_HIGH>;
+				interrupt-names = "hif0", "hif1", "hif2",
+					"hif3", "hif4", "hif5", "hif6", "hif7",
+					"hif8", "link";
+				port-id = <1>;
+				gop-port-id = <2>;
+				status = "disabled";
+			};
+
+			CP11X_LABEL(eth2): eth2 {
+				interrupts = <41 IRQ_TYPE_LEVEL_HIGH>,
+					<45 IRQ_TYPE_LEVEL_HIGH>,
+					<49 IRQ_TYPE_LEVEL_HIGH>,
+					<53 IRQ_TYPE_LEVEL_HIGH>,
+					<57 IRQ_TYPE_LEVEL_HIGH>,
+					<61 IRQ_TYPE_LEVEL_HIGH>,
+					<65 IRQ_TYPE_LEVEL_HIGH>,
+					<69 IRQ_TYPE_LEVEL_HIGH>,
+					<73 IRQ_TYPE_LEVEL_HIGH>,
+					<127 IRQ_TYPE_LEVEL_HIGH>;
+				interrupt-names = "hif0", "hif1", "hif2",
+					"hif3", "hif4", "hif5", "hif6", "hif7",
+					"hif8", "link";
+				port-id = <2>;
+				gop-port-id = <3>;
+				status = "disabled";
+			};
+		};
+
+		CP11X_LABEL(comphy): phy@120000 {
+			compatible = "marvell,comphy-cp110";
+			reg = <0x120000 0x6000>;
+			marvell,system-controller = <&CP11X_LABEL(syscon0)>;
+			clocks = <&CP11X_LABEL(clk) 1 5>, <&CP11X_LABEL(clk) 1 6>,
+				 <&CP11X_LABEL(clk) 1 18>;
+			clock-names = "mg_clk", "mg_core_clk", "axi_clk";
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			CP11X_LABEL(comphy0): phy@0 {
+				reg = <0>;
+				#phy-cells = <1>;
+			};
+
+			CP11X_LABEL(comphy1): phy@1 {
+				reg = <1>;
+				#phy-cells = <1>;
+			};
+
+			CP11X_LABEL(comphy2): phy@2 {
+				reg = <2>;
+				#phy-cells = <1>;
+			};
+
+			CP11X_LABEL(comphy3): phy@3 {
+				reg = <3>;
+				#phy-cells = <1>;
+			};
+
+			CP11X_LABEL(comphy4): phy@4 {
+				reg = <4>;
+				#phy-cells = <1>;
+			};
+
+			CP11X_LABEL(comphy5): phy@5 {
+				reg = <5>;
+				#phy-cells = <1>;
+			};
+		};
+
+		CP11X_LABEL(mdio): mdio@12a200 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "marvell,orion-mdio";
+			reg = <0x12a200 0x10>;
+			clocks = <&CP11X_LABEL(clk) 1 9>, <&CP11X_LABEL(clk) 1 5>,
+				 <&CP11X_LABEL(clk) 1 6>, <&CP11X_LABEL(clk) 1 18>;
+			status = "disabled";
+		};
+
+		CP11X_LABEL(xmdio): mdio@12a600 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "marvell,xmdio";
+			reg = <0x12a600 0x10>;
+			clocks = <&CP11X_LABEL(clk) 1 5>,
+				 <&CP11X_LABEL(clk) 1 6>, <&CP11X_LABEL(clk) 1 18>;
+			status = "disabled";
+		};
+
+		CP11X_LABEL(icu): interrupt-controller@1e0000 {
+			compatible = "marvell,cp110-icu";
+			reg = <0x1e0000 0x440>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			CP11X_LABEL(icu_nsr): interrupt-controller@10 {
+				compatible = "marvell,cp110-icu-nsr";
+				reg = <0x10 0x20>;
+				#interrupt-cells = <2>;
+				interrupt-controller;
+				msi-parent = <&gicp>;
+			};
+
+			CP11X_LABEL(icu_sei): interrupt-controller@50 {
+				compatible = "marvell,cp110-icu-sei";
+				reg = <0x50 0x10>;
+				#interrupt-cells = <2>;
+				interrupt-controller;
+				msi-parent = <&sei>;
+			};
+		};
+
+		CP11X_LABEL(rtc): rtc@284000 {
+			compatible = "marvell,armada-8k-rtc";
+			reg = <0x284000 0x20>, <0x284080 0x24>;
+			reg-names = "rtc", "rtc-soc";
+			interrupts = <77 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
+		CP11X_LABEL(syscon0): system-controller@440000 {
+			compatible = "syscon", "simple-mfd";
+			reg = <0x440000 0x2000>;
+
+			CP11X_LABEL(clk): clock {
+				compatible = "marvell,cp110-clock";
+				#clock-cells = <2>;
+			};
+
+			CP11X_LABEL(gpio1): gpio@100 {
+				compatible = "marvell,armada-8k-gpio";
+				offset = <0x100>;
+				ngpios = <32>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				gpio-ranges = <&CP11X_LABEL(pinctrl) 0 0 32>;
+				interrupt-controller;
+				interrupts = <86 IRQ_TYPE_LEVEL_HIGH>,
+					<85 IRQ_TYPE_LEVEL_HIGH>,
+					<84 IRQ_TYPE_LEVEL_HIGH>,
+					<83 IRQ_TYPE_LEVEL_HIGH>;
+				#interrupt-cells = <2>;
+				status = "disabled";
+			};
+
+			CP11X_LABEL(gpio2): gpio@140 {
+				compatible = "marvell,armada-8k-gpio";
+				offset = <0x140>;
+				ngpios = <31>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				gpio-ranges = <&CP11X_LABEL(pinctrl) 0 32 31>;
+				interrupt-controller;
+				interrupts = <82 IRQ_TYPE_LEVEL_HIGH>,
+					<81 IRQ_TYPE_LEVEL_HIGH>,
+					<80 IRQ_TYPE_LEVEL_HIGH>,
+					<79 IRQ_TYPE_LEVEL_HIGH>;
+				#interrupt-cells = <2>;
+				status = "disabled";
+			};
+		};
+
+		CP11X_LABEL(syscon1): system-controller@400000 {
+			compatible = "syscon", "simple-mfd";
+			reg = <0x400000 0x1000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			CP11X_LABEL(thermal): thermal-sensor@70 {
+				compatible = "marvell,armada-cp110-thermal";
+				reg = <0x70 0x10>;
+				interrupts-extended =
+					<&CP11X_LABEL(icu_sei) 116 IRQ_TYPE_LEVEL_HIGH>;
+				#thermal-sensor-cells = <1>;
+			};
+		};
+
+		CP11X_LABEL(usb3_0): usb3@500000 {
+			compatible = "marvell,armada-8k-xhci",
+			"generic-xhci";
+			reg = <0x500000 0x4000>;
+			dma-coherent;
+			interrupts = <106 IRQ_TYPE_LEVEL_HIGH>;
+			clock-names = "core", "reg";
+			clocks = <&CP11X_LABEL(clk) 1 22>,
+				 <&CP11X_LABEL(clk) 1 16>;
+			status = "disabled";
+		};
+
+		CP11X_LABEL(usb3_1): usb3@510000 {
+			compatible = "marvell,armada-8k-xhci",
+			"generic-xhci";
+			reg = <0x510000 0x4000>;
+			dma-coherent;
+			interrupts = <105 IRQ_TYPE_LEVEL_HIGH>;
+			clock-names = "core", "reg";
+			clocks = <&CP11X_LABEL(clk) 1 23>,
+				 <&CP11X_LABEL(clk) 1 16>;
+			status = "disabled";
+		};
+
+		CP11X_LABEL(sata0): sata@540000 {
+			compatible = "marvell,armada-8k-ahci",
+			"generic-ahci";
+			reg = <0x540000 0x30000>;
+			dma-coherent;
+			interrupts = <107 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&CP11X_LABEL(clk) 1 15>,
+				 <&CP11X_LABEL(clk) 1 16>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+
+			sata-port@0 {
+				reg = <0>;
+			};
+
+			sata-port@1 {
+				reg = <1>;
+			};
+		};
+
+		CP11X_LABEL(xor0): xor@6a0000 {
+			compatible = "marvell,armada-7k-xor", "marvell,xor-v2";
+			reg = <0x6a0000 0x1000>, <0x6b0000 0x1000>;
+			dma-coherent;
+			msi-parent = <&gic_v2m0>;
+			clock-names = "core", "reg";
+			clocks = <&CP11X_LABEL(clk) 1 8>,
+				 <&CP11X_LABEL(clk) 1 14>;
+		};
+
+		CP11X_LABEL(xor1): xor@6c0000 {
+			compatible = "marvell,armada-7k-xor", "marvell,xor-v2";
+			reg = <0x6c0000 0x1000>, <0x6d0000 0x1000>;
+			dma-coherent;
+			msi-parent = <&gic_v2m0>;
+			clock-names = "core", "reg";
+			clocks = <&CP11X_LABEL(clk) 1 7>,
+				 <&CP11X_LABEL(clk) 1 14>;
+		};
+
+		CP11X_LABEL(spi0): spi@700600 {
+			compatible = "marvell,armada-380-spi";
+			reg = <0x700600 0x50>;
+			#address-cells = <0x1>;
+			#size-cells = <0x0>;
+			clock-names = "core", "axi";
+			clocks = <&CP11X_LABEL(clk) 1 21>,
+				 <&CP11X_LABEL(clk) 1 17>;
+			status = "disabled";
+		};
+
+		CP11X_LABEL(spi1): spi@700680 {
+			compatible = "marvell,armada-380-spi";
+			reg = <0x700680 0x50>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			clock-names = "core", "axi";
+			clocks = <&CP11X_LABEL(clk) 1 21>,
+				 <&CP11X_LABEL(clk) 1 17>;
+			status = "disabled";
+		};
+
+		CP11X_LABEL(i2c0): i2c@701000 {
+			compatible = "marvell,mv78230-i2c";
+			reg = <0x701000 0x20>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			interrupts = <120 IRQ_TYPE_LEVEL_HIGH>;
+			clock-names = "core", "reg";
+			clocks = <&CP11X_LABEL(clk) 1 21>,
+				 <&CP11X_LABEL(clk) 1 17>;
+			status = "disabled";
+		};
+
+		CP11X_LABEL(i2c1): i2c@701100 {
+			compatible = "marvell,mv78230-i2c";
+			reg = <0x701100 0x20>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			interrupts = <121 IRQ_TYPE_LEVEL_HIGH>;
+			clock-names = "core", "reg";
+			clocks = <&CP11X_LABEL(clk) 1 21>,
+				 <&CP11X_LABEL(clk) 1 17>;
+			status = "disabled";
+		};
+
+		CP11X_LABEL(uart0): serial@702000 {
+			compatible = "snps,dw-apb-uart";
+			reg = <0x702000 0x100>;
+			reg-shift = <2>;
+			interrupts = <122 IRQ_TYPE_LEVEL_HIGH>;
+			reg-io-width = <1>;
+			clock-names = "baudclk", "apb_pclk";
+			clocks = <&CP11X_LABEL(clk) 1 21>,
+				 <&CP11X_LABEL(clk) 1 17>;
+			status = "disabled";
+		};
+
+		CP11X_LABEL(uart1): serial@702100 {
+			compatible = "snps,dw-apb-uart";
+			reg = <0x702100 0x100>;
+			reg-shift = <2>;
+			interrupts = <123 IRQ_TYPE_LEVEL_HIGH>;
+			reg-io-width = <1>;
+			clock-names = "baudclk", "apb_pclk";
+			clocks = <&CP11X_LABEL(clk) 1 21>,
+				 <&CP11X_LABEL(clk) 1 17>;
+			status = "disabled";
+		};
+
+		CP11X_LABEL(uart2): serial@702200 {
+			compatible = "snps,dw-apb-uart";
+			reg = <0x702200 0x100>;
+			reg-shift = <2>;
+			interrupts = <124 IRQ_TYPE_LEVEL_HIGH>;
+			reg-io-width = <1>;
+			clock-names = "baudclk", "apb_pclk";
+			clocks = <&CP11X_LABEL(clk) 1 21>,
+				 <&CP11X_LABEL(clk) 1 17>;
+			status = "disabled";
+		};
+
+		CP11X_LABEL(uart3): serial@702300 {
+			compatible = "snps,dw-apb-uart";
+			reg = <0x702300 0x100>;
+			reg-shift = <2>;
+			interrupts = <125 IRQ_TYPE_LEVEL_HIGH>;
+			reg-io-width = <1>;
+			clock-names = "baudclk", "apb_pclk";
+			clocks = <&CP11X_LABEL(clk) 1 21>,
+				 <&CP11X_LABEL(clk) 1 17>;
+			status = "disabled";
+		};
+
+		CP11X_LABEL(nand_controller): nand@720000 {
+			/*
+			 * Due to the limitation of the pins available
+			 * this controller is only usable on the CPM
+			 * for A7K and on the CPS for A8K.
+			 */
+			compatible = "marvell,armada-8k-nand-controller",
+				"marvell,armada370-nand-controller";
+			reg = <0x720000 0x54>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			interrupts = <115 IRQ_TYPE_LEVEL_HIGH>;
+			clock-names = "core", "reg";
+			clocks = <&CP11X_LABEL(clk) 1 2>,
+				 <&CP11X_LABEL(clk) 1 17>;
+			marvell,system-controller = <&CP11X_LABEL(syscon0)>;
+			status = "disabled";
+		};
+
+		CP11X_LABEL(trng): trng@760000 {
+			compatible = "marvell,armada-8k-rng",
+			"inside-secure,safexcel-eip76";
+			reg = <0x760000 0x7d>;
+			interrupts = <95 IRQ_TYPE_LEVEL_HIGH>;
+			clock-names = "core", "reg";
+			clocks = <&CP11X_LABEL(clk) 1 25>,
+				 <&CP11X_LABEL(clk) 1 17>;
+			status = "okay";
+		};
+
+		CP11X_LABEL(sdhci0): sdhci@780000 {
+			compatible = "marvell,armada-cp110-sdhci";
+			reg = <0x780000 0x300>;
+			interrupts = <27 IRQ_TYPE_LEVEL_HIGH>;
+			clock-names = "core", "axi";
+			clocks = <&CP11X_LABEL(clk) 1 4>, <&CP11X_LABEL(clk) 1 18>;
+			dma-coherent;
+			status = "disabled";
+		};
+
+		CP11X_LABEL(crypto): crypto@800000 {
+			compatible = "inside-secure,safexcel-eip197b";
+			reg = <0x800000 0x200000>;
+			interrupts = <87 IRQ_TYPE_LEVEL_HIGH>,
+				<88 IRQ_TYPE_LEVEL_HIGH>,
+				<89 IRQ_TYPE_LEVEL_HIGH>,
+				<90 IRQ_TYPE_LEVEL_HIGH>,
+				<91 IRQ_TYPE_LEVEL_HIGH>,
+				<92 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "mem", "ring0", "ring1",
+				"ring2", "ring3", "eip";
+			clock-names = "core", "reg";
+			clocks = <&CP11X_LABEL(clk) 1 26>,
+				 <&CP11X_LABEL(clk) 1 17>;
+			dma-coherent;
+		};
+	};
+
+	CP11X_LABEL(pcie0): pcie@CP11X_PCIE0_BASE {
+		compatible = "marvell,armada8k-pcie", "snps,dw-pcie";
+		reg = <0 ADDRESSIFY(CP11X_PCIE0_BASE) 0 0x10000>,
+		      <0 CP11X_PCIEx_CONF_BASE(0) 0 0x80000>;
+		reg-names = "ctrl", "config";
+		#address-cells = <3>;
+		#size-cells = <2>;
+		#interrupt-cells = <1>;
+		device_type = "pci";
+		dma-coherent;
+		msi-parent = <&gic_v2m0>;
+
+		bus-range = <0 0xff>;
+		/* non-prefetchable memory */
+		ranges = <0x82000000 0 CP11X_PCIEx_MEM_BASE(0) 0  CP11X_PCIEx_MEM_BASE(0) 0 CP11X_PCIEx_MEM_SIZE(0)>;
+		interrupt-map-mask = <0 0 0 0>;
+		interrupt-map = <0 0 0 0 &CP11X_LABEL(icu_nsr) 22 IRQ_TYPE_LEVEL_HIGH>;
+		interrupts = <22 IRQ_TYPE_LEVEL_HIGH>;
+		num-lanes = <1>;
+		clock-names = "core", "reg";
+		clocks = <&CP11X_LABEL(clk) 1 13>, <&CP11X_LABEL(clk) 1 14>;
+		status = "disabled";
+	};
+
+	CP11X_LABEL(pcie1): pcie@CP11X_PCIE1_BASE {
+		compatible = "marvell,armada8k-pcie", "snps,dw-pcie";
+		reg = <0 ADDRESSIFY(CP11X_PCIE1_BASE) 0 0x10000>,
+		      <0 CP11X_PCIEx_CONF_BASE(1) 0 0x80000>;
+		reg-names = "ctrl", "config";
+		#address-cells = <3>;
+		#size-cells = <2>;
+		#interrupt-cells = <1>;
+		device_type = "pci";
+		dma-coherent;
+		msi-parent = <&gic_v2m0>;
+
+		bus-range = <0 0xff>;
+		/* non-prefetchable memory */
+		ranges = <0x82000000 0 CP11X_PCIEx_MEM_BASE(1) 0  CP11X_PCIEx_MEM_BASE(1) 0 CP11X_PCIEx_MEM_SIZE(1)>;
+		interrupt-map-mask = <0 0 0 0>;
+		interrupt-map = <0 0 0 0 &CP11X_LABEL(icu_nsr) 24 IRQ_TYPE_LEVEL_HIGH>;
+		interrupts = <24 IRQ_TYPE_LEVEL_HIGH>;
+
+		num-lanes = <1>;
+		clock-names = "core", "reg";
+		clocks = <&CP11X_LABEL(clk) 1 11>, <&CP11X_LABEL(clk) 1 14>;
+		status = "disabled";
+	};
+
+	CP11X_LABEL(pcie2): pcie@CP11X_PCIE2_BASE {
+		compatible = "marvell,armada8k-pcie", "snps,dw-pcie";
+		reg = <0 ADDRESSIFY(CP11X_PCIE2_BASE) 0 0x10000>,
+		      <0 CP11X_PCIEx_CONF_BASE(2) 0 0x80000>;
+		reg-names = "ctrl", "config";
+		#address-cells = <3>;
+		#size-cells = <2>;
+		#interrupt-cells = <1>;
+		device_type = "pci";
+		dma-coherent;
+		msi-parent = <&gic_v2m0>;
+
+		bus-range = <0 0xff>;
+		/* non-prefetchable memory */
+		ranges = <0x82000000 0 CP11X_PCIEx_MEM_BASE(2) 0  CP11X_PCIEx_MEM_BASE(2) 0 CP11X_PCIEx_MEM_SIZE(2)>;
+		interrupt-map-mask = <0 0 0 0>;
+		interrupt-map = <0 0 0 0 &CP11X_LABEL(icu_nsr) 23 IRQ_TYPE_LEVEL_HIGH>;
+		interrupts = <23 IRQ_TYPE_LEVEL_HIGH>;
+
+		num-lanes = <1>;
+		clock-names = "core", "reg";
+		clocks = <&CP11X_LABEL(clk) 1 12>, <&CP11X_LABEL(clk) 1 14>;
+		status = "disabled";
+	};
+};
diff --git a/arch/arm64/boot/dts/marvell/cn9130-db.dts b/arch/arm64/boot/dts/marvell/cn9130-db.dts
new file mode 100644
index 000000000000..ce49a70d88a0
--- /dev/null
+++ b/arch/arm64/boot/dts/marvell/cn9130-db.dts
@@ -0,0 +1,403 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (C) 2019 Marvell International Ltd.
+ *
+ * Device tree for the CN9130-DB board.
+ */
+
+#include "cn9130.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+	model = "Marvell Armada CN9130-DB";
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	aliases {
+		gpio1 = &cp0_gpio1;
+		gpio2 = &cp0_gpio2;
+		i2c0 = &cp0_i2c0;
+		ethernet0 = &cp0_eth0;
+		ethernet1 = &cp0_eth1;
+		ethernet2 = &cp0_eth2;
+		spi1 = &cp0_spi0;
+		spi2 = &cp0_spi1;
+	};
+
+	memory@00000000 {
+		device_type = "memory";
+		reg = <0x0 0x0 0x0 0x80000000>;
+	};
+
+	ap0_reg_sd_vccq: ap0_sd_vccq@0 {
+		compatible = "regulator-gpio";
+		regulator-name = "ap0_sd_vccq";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <3300000>;
+		gpios = <&expander0 8 GPIO_ACTIVE_HIGH>;
+		states = <1800000 0x1 3300000 0x0>;
+	};
+
+	cp0_reg_usb3_vbus0: cp0_usb3_vbus@0 {
+		compatible = "regulator-fixed";
+		regulator-name = "cp0-xhci0-vbus";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		enable-active-high;
+		gpio = <&expander0 0 GPIO_ACTIVE_HIGH>;
+	};
+
+	cp0_usb3_0_phy0: cp0_usb3_phy@0 {
+		compatible = "usb-nop-xceiv";
+		vcc-supply = <&cp0_reg_usb3_vbus0>;
+	};
+
+	cp0_reg_usb3_vbus1: cp0_usb3_vbus@1 {
+		compatible = "regulator-fixed";
+		regulator-name = "cp0-xhci1-vbus";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		enable-active-high;
+		gpio = <&expander0 1 GPIO_ACTIVE_HIGH>;
+	};
+
+	cp0_usb3_0_phy1: cp0_usb3_phy@1 {
+		compatible = "usb-nop-xceiv";
+		vcc-supply = <&cp0_reg_usb3_vbus1>;
+	};
+
+	cp0_reg_sd_vccq: cp0_sd_vccq@0 {
+		compatible = "regulator-gpio";
+		regulator-name = "cp0_sd_vccq";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <3300000>;
+		gpios = <&expander0 15 GPIO_ACTIVE_HIGH>;
+		states = <1800000 0x1
+			  3300000 0x0>;
+	};
+
+	cp0_reg_sd_vcc: cp0_sd_vcc@0 {
+		compatible = "regulator-fixed";
+		regulator-name = "cp0_sd_vcc";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&expander0 14 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		regulator-always-on;
+	};
+
+	cp0_sfp_eth0: sfp-eth@0 {
+		compatible = "sff,sfp";
+		i2c-bus = <&cp0_sfpp0_i2c>;
+		los-gpio = <&cp0_module_expander1 11 GPIO_ACTIVE_HIGH>;
+		mod-def0-gpio = <&cp0_module_expander1 10 GPIO_ACTIVE_LOW>;
+		tx-disable-gpio = <&cp0_module_expander1 9 GPIO_ACTIVE_HIGH>;
+		tx-fault-gpio = <&cp0_module_expander1 8 GPIO_ACTIVE_HIGH>;
+		/*
+		 * SFP cages are unconnected on early PCBs because of an the I2C
+		 * lanes not being connected. Prevent the port for being
+		 * unusable by disabling the SFP node.
+		 */
+		status = "disabled";
+	};
+};
+
+&uart0 {
+	status = "okay";
+};
+
+/* on-board eMMC - U9 */
+&ap_sdhci0 {
+	pinctrl-names = "default";
+	bus-width = <8>;
+	vqmmc-supply = <&ap0_reg_sd_vccq>;
+	status = "okay";
+};
+
+&cp0_crypto {
+	status = "disabled";
+};
+
+&cp0_ethernet {
+	status = "okay";
+};
+
+/* SLM-1521-V2, CON9 */
+&cp0_eth0 {
+	status = "disabled";
+	phy-mode = "10gbase-kr";
+	/* Generic PHY, providing serdes lanes */
+	phys = <&cp0_comphy4 0>;
+	managed = "in-band-status";
+	sfp = <&cp0_sfp_eth0>;
+};
+
+/* CON56 */
+&cp0_eth1 {
+	status = "okay";
+	phy = <&phy0>;
+	phy-mode = "rgmii-id";
+};
+
+/* CON57 */
+&cp0_eth2 {
+	status = "okay";
+	phy = <&phy1>;
+	phy-mode = "rgmii-id";
+};
+
+&cp0_gpio1 {
+	status = "okay";
+};
+
+&cp0_gpio2 {
+	status = "okay";
+};
+
+&cp0_i2c0 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&cp0_i2c0_pins>;
+	clock-frequency = <100000>;
+
+	/* U36 */
+	expander0: pca953x@21 {
+		compatible = "nxp,pca9555";
+		pinctrl-names = "default";
+		gpio-controller;
+		#gpio-cells = <2>;
+		reg = <0x21>;
+		status = "okay";
+	};
+
+	/* U42 */
+	eeprom0: eeprom@50 {
+		compatible = "atmel,24c64";
+		reg = <0x50>;
+		pagesize = <0x20>;
+	};
+
+	/* U38 */
+	eeprom1: eeprom@57 {
+		compatible = "atmel,24c64";
+		reg = <0x57>;
+		pagesize = <0x20>;
+	};
+};
+
+&cp0_i2c1 {
+	status = "okay";
+	clock-frequency = <100000>;
+
+	/* SLM-1521-V2 - U3 */
+	i2c-mux@72 { /* verify address - depends on dpr */
+		compatible = "nxp,pca9544";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		reg = <0x72>;
+		cp0_sfpp0_i2c: i2c@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0>;
+		};
+
+		i2c@1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <1>;
+			/* U12 */
+			cp0_module_expander1: pca9555@21 {
+				compatible = "nxp,pca9555";
+				pinctrl-names = "default";
+				gpio-controller;
+				#gpio-cells = <2>;
+				reg = <0x21>;
+			};
+
+		};
+	};
+};
+
+&cp0_mdio {
+	status = "okay";
+
+	phy0: ethernet-phy@0 {
+		reg = <0>;
+	};
+
+	phy1: ethernet-phy@1 {
+		reg = <1>;
+	};
+};
+
+/* U54 */
+&cp0_nand_controller {
+	pinctrl-names = "default";
+	pinctrl-0 = <&nand_pins &nand_rb>;
+
+	nand@0 {
+		reg = <0>;
+		label = "main-storage";
+		nand-rb = <0>;
+		nand-ecc-mode = "hw";
+		nand-on-flash-bbt;
+		nand-ecc-strength = <8>;
+		nand-ecc-step-size = <512>;
+
+		partitions {
+			compatible = "fixed-partitions";
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			partition@0 {
+				label = "U-Boot";
+				reg = <0 0x200000>;
+			};
+			partition@200000 {
+				label = "Linux";
+				reg = <0x200000 0xd00000>;
+			};
+			partition@1000000 {
+				label = "Filesystem";
+				reg = <0x1000000 0x3f000000>;
+			};
+		};
+	};
+};
+
+/* SLM-1521-V2, CON6 */
+&cp0_pcie0 {
+	status = "okay";
+	num-lanes = <4>;
+	num-viewport = <8>;
+	/* Generic PHY, providing serdes lanes */
+	phys = <&cp0_comphy0 0
+		&cp0_comphy1 0
+		&cp0_comphy2 0
+		&cp0_comphy3 0>;
+};
+
+&cp0_sata0 {
+	status = "okay";
+
+	/* SLM-1521-V2, CON2 */
+	sata-port@1 {
+		status = "okay";
+		/* Generic PHY, providing serdes lanes */
+		phys = <&cp0_comphy5 1>;
+	};
+};
+
+/* CON 28 */
+&cp0_sdhci0 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&cp0_sdhci_pins
+		     &cp0_sdhci_cd_pins>;
+	bus-width = <4>;
+	cd-gpios = <&cp0_gpio2 11 GPIO_ACTIVE_LOW>;
+	no-1-8-v;
+	vqmmc-supply = <&cp0_reg_sd_vccq>;
+	vmmc-supply = <&cp0_reg_sd_vcc>;
+};
+
+/* U55 */
+&cp0_spi1 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&cp0_spi0_pins>;
+	reg = <0x700680 0x50>;
+
+	spi-flash@0 {
+		#address-cells = <0x1>;
+		#size-cells = <0x1>;
+		compatible = "jedec,spi-nor";
+		reg = <0x0>;
+		/* On-board MUX does not allow higher frequencies */
+		spi-max-frequency = <40000000>;
+
+		partitions {
+			compatible = "fixed-partitions";
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			partition@0 {
+				label = "U-Boot-0";
+				reg = <0x0 0x200000>;
+			};
+
+			partition@400000 {
+				label = "Filesystem-0";
+				reg = <0x200000 0xe00000>;
+			};
+		};
+	};
+};
+
+&cp0_syscon0 {
+	cp0_pinctrl: pinctrl {
+		compatible = "marvell,cp115-standalone-pinctrl";
+
+		cp0_i2c0_pins: cp0-i2c-pins-0 {
+			marvell,pins = "mpp37", "mpp38";
+			marvell,function = "i2c0";
+		};
+		cp0_i2c1_pins: cp0-i2c-pins-1 {
+			marvell,pins = "mpp35", "mpp36";
+			marvell,function = "i2c1";
+		};
+		cp0_ge1_rgmii_pins: cp0-ge-rgmii-pins-0 {
+			marvell,pins = "mpp0", "mpp1", "mpp2",
+				       "mpp3", "mpp4", "mpp5",
+				       "mpp6", "mpp7", "mpp8",
+				       "mpp9", "mpp10", "mpp11";
+			marvell,function = "ge0";
+		};
+		cp0_ge2_rgmii_pins: cp0-ge-rgmii-pins-1 {
+			marvell,pins = "mpp44", "mpp45", "mpp46",
+				       "mpp47", "mpp48", "mpp49",
+				       "mpp50", "mpp51", "mpp52",
+				       "mpp53", "mpp54", "mpp55";
+			marvell,function = "ge1";
+		};
+		cp0_sdhci_cd_pins: cp0-sdhci-cd-pins-0 {
+			marvell,pins = "mpp43";
+			marvell,function = "gpio";
+		};
+		cp0_sdhci_pins: cp0-sdhi-pins-0 {
+			marvell,pins = "mpp56", "mpp57", "mpp58",
+				       "mpp59", "mpp60", "mpp61";
+			marvell,function = "sdio";
+		};
+		cp0_spi0_pins: cp0-spi-pins-0 {
+			marvell,pins = "mpp13", "mpp14", "mpp15", "mpp16";
+			marvell,function = "spi1";
+		};
+		nand_pins: nand-pins {
+			marvell,pins = "mpp15", "mpp16", "mpp17", "mpp18",
+				       "mpp19", "mpp20", "mpp21", "mpp22",
+				       "mpp23", "mpp24", "mpp25", "mpp26",
+				       "mpp27";
+			marvell,function = "dev";
+		};
+		nand_rb: nand-rb {
+			marvell,pins = "mpp13";
+			marvell,function = "nf";
+		};
+	};
+};
+
+&cp0_usb3_0 {
+	status = "okay";
+	usb-phy = <&cp0_usb3_0_phy0>;
+	phy-names = "usb";
+};
+
+&cp0_usb3_1 {
+	status = "okay";
+	usb-phy = <&cp0_usb3_0_phy1>;
+	phy-names = "usb";
+};
diff --git a/arch/arm64/boot/dts/marvell/cn9130.dtsi b/arch/arm64/boot/dts/marvell/cn9130.dtsi
new file mode 100644
index 000000000000..a2b7e5ec979d
--- /dev/null
+++ b/arch/arm64/boot/dts/marvell/cn9130.dtsi
@@ -0,0 +1,37 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (C) 2019 Marvell International Ltd.
+ *
+ * Device tree for the CN9130 SoC.
+ */
+
+#include "armada-ap807-quad.dtsi"
+
+/ {
+	model = "Marvell Armada CN9130 SoC";
+	compatible = "marvell,cn9130", "marvell,armada-ap807-quad",
+		     "marvell,armada-ap807";
+};
+
+/*
+ * Instantiate the internal CP115
+ */
+
+#define CP11X_NAME		cp0
+#define CP11X_BASE		f2000000
+#define CP11X_PCIEx_MEM_BASE(iface) ((iface == 0) ? 0xc0000000 : \
+						    0xe0000000 + ((iface - 1) * 0x1000000))
+#define CP11X_PCIEx_MEM_SIZE(iface) ((iface == 0) ? 0x1ff00000 : 0xf00000)
+#define CP11X_PCIE0_BASE	f2600000
+#define CP11X_PCIE1_BASE	f2620000
+#define CP11X_PCIE2_BASE	f2640000
+
+#include "armada-cp115.dtsi"
+
+#undef CP11X_NAME
+#undef CP11X_BASE
+#undef CP11X_PCIEx_MEM_BASE
+#undef CP11X_PCIEx_MEM_SIZE
+#undef CP11X_PCIE0_BASE
+#undef CP11X_PCIE1_BASE
+#undef CP11X_PCIE2_BASE
diff --git a/arch/arm64/boot/dts/marvell/cn9131-db.dts b/arch/arm64/boot/dts/marvell/cn9131-db.dts
new file mode 100644
index 000000000000..3c975f98b2a3
--- /dev/null
+++ b/arch/arm64/boot/dts/marvell/cn9131-db.dts
@@ -0,0 +1,202 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (C) 2019 Marvell International Ltd.
+ *
+ * Device tree for the CN9131-DB board.
+ */
+
+#include "cn9130-db.dts"
+
+/ {
+	model = "Marvell Armada CN9131-DB";
+	compatible = "marvell,cn9131", "marvell,cn9130",
+		     "marvell,armada-ap807-quad", "marvell,armada-ap807";
+
+	aliases {
+		gpio3 = &cp1_gpio1;
+		gpio4 = &cp1_gpio2;
+		ethernet3 = &cp1_eth0;
+		ethernet4 = &cp1_eth1;
+	};
+
+	cp1_reg_usb3_vbus0: cp1_usb3_vbus@0 {
+		compatible = "regulator-fixed";
+		pinctrl-names = "default";
+		pinctrl-0 = <&cp1_xhci0_vbus_pins>;
+		regulator-name = "cp1-xhci0-vbus";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		enable-active-high;
+		gpio = <&cp1_gpio1 3 GPIO_ACTIVE_HIGH>;
+	};
+
+	cp1_usb3_0_phy0: cp1_usb3_phy0 {
+		compatible = "usb-nop-xceiv";
+		vcc-supply = <&cp1_reg_usb3_vbus0>;
+	};
+
+	cp1_sfp_eth1: sfp-eth1 {
+		compatible = "sff,sfp";
+		i2c-bus = <&cp1_i2c0>;
+		los-gpio = <&cp1_gpio1 11 GPIO_ACTIVE_HIGH>;
+		mod-def0-gpio = <&cp1_gpio1 10 GPIO_ACTIVE_LOW>;
+		tx-disable-gpio = <&cp1_gpio1 9 GPIO_ACTIVE_HIGH>;
+		tx-fault-gpio = <&cp1_gpio1 8 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&cp1_sfp_pins>;
+		/*
+		 * SFP cages are unconnected on early PCBs because of an the I2C
+		 * lanes not being connected. Prevent the port for being
+		 * unusable by disabling the SFP node.
+		 */
+		status = "disabled";
+	};
+};
+
+/*
+ * Instantiate the first slave CP115
+ */
+
+#define CP11X_NAME		cp1
+#define CP11X_BASE		f4000000
+#define CP11X_PCIEx_MEM_BASE(iface) (0xe2000000 + (iface * 0x1000000))
+#define CP11X_PCIEx_MEM_SIZE(iface) 0xf00000
+#define CP11X_PCIE0_BASE	f4600000
+#define CP11X_PCIE1_BASE	f4620000
+#define CP11X_PCIE2_BASE	f4640000
+
+#include "armada-cp115.dtsi"
+
+#undef CP11X_NAME
+#undef CP11X_BASE
+#undef CP11X_PCIEx_MEM_BASE
+#undef CP11X_PCIEx_MEM_SIZE
+#undef CP11X_PCIE0_BASE
+#undef CP11X_PCIE1_BASE
+#undef CP11X_PCIE2_BASE
+
+&cp1_crypto {
+	status = "disabled";
+};
+
+&cp1_ethernet {
+	status = "okay";
+};
+
+/* CON50 */
+&cp1_eth0 {
+	status = "disabled";
+	phy-mode = "10gbase-kr";
+	/* Generic PHY, providing serdes lanes */
+	phys = <&cp1_comphy4 0>;
+	managed = "in-band-status";
+	sfp = <&cp1_sfp_eth1>;
+};
+
+&cp1_gpio1 {
+	status = "okay";
+};
+
+&cp1_gpio2 {
+	status = "okay";
+};
+
+&cp1_i2c0 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&cp1_i2c0_pins>;
+	clock-frequency = <100000>;
+};
+
+/* CON40 */
+&cp1_pcie0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&cp1_pcie_reset_pins>;
+	num-lanes = <2>;
+	num-viewport = <8>;
+	marvell,reset-gpio = <&cp1_gpio1 0 GPIO_ACTIVE_HIGH>;
+	status = "okay";
+	/* Generic PHY, providing serdes lanes */
+	phys = <&cp1_comphy0 0
+		&cp1_comphy1 0>;
+};
+
+&cp1_sata0 {
+	status = "okay";
+
+	/* CON32 */
+	sata-port@1 {
+		/* Generic PHY, providing serdes lanes */
+		phys = <&cp1_comphy5 1>;
+	};
+};
+
+/* U24 */
+&cp1_spi1 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&cp1_spi0_pins>;
+	reg = <0x700680 0x50>;
+
+	spi-flash@0 {
+		#address-cells = <0x1>;
+		#size-cells = <0x1>;
+		compatible = "jedec,spi-nor";
+		reg = <0x0>;
+		/* On-board MUX does not allow higher frequencies */
+		spi-max-frequency = <40000000>;
+
+		partitions {
+			compatible = "fixed-partitions";
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			partition@0 {
+				label = "U-Boot-1";
+				reg = <0x0 0x200000>;
+			};
+
+			partition@400000 {
+				label = "Filesystem-1";
+				reg = <0x200000 0xe00000>;
+			};
+		};
+	};
+
+};
+
+&cp1_syscon0 {
+	cp1_pinctrl: pinctrl {
+		compatible = "marvell,cp115-standalone-pinctrl";
+
+		cp1_i2c0_pins: cp1-i2c-pins-0 {
+			marvell,pins = "mpp37", "mpp38";
+			marvell,function = "i2c0";
+		};
+		cp1_spi0_pins: cp1-spi-pins-0 {
+			marvell,pins = "mpp13", "mpp14", "mpp15", "mpp16";
+			marvell,function = "spi1";
+		};
+		cp1_xhci0_vbus_pins: cp1-xhci0-vbus-pins {
+			marvell,pins = "mpp3";
+			marvell,function = "gpio";
+		};
+		cp1_sfp_pins: sfp-pins {
+			marvell,pins = "mpp8", "mpp9", "mpp10", "mpp11";
+			marvell,function = "gpio";
+		};
+		cp1_pcie_reset_pins: cp1-pcie-reset-pins {
+			marvell,pins = "mpp0";
+			marvell,function = "gpio";
+		};
+	};
+};
+
+/* CON58 */
+&cp1_usb3_1 {
+	status = "okay";
+	usb-phy = <&cp1_usb3_0_phy0>;
+	/* Generic PHY, providing serdes lanes */
+	phys = <&cp1_comphy3 1>;
+	phy-names = "usb";
+};
diff --git a/arch/arm64/boot/dts/marvell/cn9132-db.dts b/arch/arm64/boot/dts/marvell/cn9132-db.dts
new file mode 100644
index 000000000000..4ef0df3097ca
--- /dev/null
+++ b/arch/arm64/boot/dts/marvell/cn9132-db.dts
@@ -0,0 +1,221 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (C) 2019 Marvell International Ltd.
+ *
+ * Device tree for the CN9132-DB board.
+ */
+
+#include "cn9131-db.dts"
+
+/ {
+	model = "Marvell Armada CN9132-DB";
+	compatible = "marvell,cn9132", "marvell,cn9131", "marvell,cn9130",
+		     "marvell,armada-ap807-quad", "marvell,armada-ap807";
+
+	aliases {
+		gpio5 = &cp2_gpio1;
+		gpio6 = &cp2_gpio2;
+		ethernet5 = &cp2_eth0;
+	};
+
+	cp2_reg_usb3_vbus0: cp2_usb3_vbus@0 {
+		compatible = "regulator-fixed";
+		regulator-name = "cp2-xhci0-vbus";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		enable-active-high;
+		gpio = <&cp2_gpio1 2 GPIO_ACTIVE_HIGH>;
+	};
+
+	cp2_usb3_0_phy0: cp2_usb3_phy0 {
+		compatible = "usb-nop-xceiv";
+		vcc-supply = <&cp2_reg_usb3_vbus0>;
+	};
+
+	cp2_reg_usb3_vbus1: cp2_usb3_vbus@1 {
+		compatible = "regulator-fixed";
+		regulator-name = "cp2-xhci1-vbus";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		enable-active-high;
+		gpio = <&cp2_gpio1 3 GPIO_ACTIVE_HIGH>;
+	};
+
+	cp2_usb3_0_phy1: cp2_usb3_phy1 {
+		compatible = "usb-nop-xceiv";
+		vcc-supply = <&cp2_reg_usb3_vbus1>;
+	};
+
+	cp2_reg_sd_vccq: cp2_sd_vccq@0 {
+		compatible = "regulator-gpio";
+		regulator-name = "cp2_sd_vcc";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <3300000>;
+		gpios = <&cp2_gpio2 17 GPIO_ACTIVE_HIGH>;
+		states = <1800000 0x1 3300000 0x0>;
+	};
+
+	cp2_sfp_eth0: sfp-eth0 {
+		compatible = "sff,sfp";
+		i2c-bus = <&cp2_sfpp0_i2c>;
+		los-gpio = <&cp2_module_expander1 11 GPIO_ACTIVE_HIGH>;
+		mod-def0-gpio = <&cp2_module_expander1 10 GPIO_ACTIVE_LOW>;
+		tx-disable-gpio = <&cp2_module_expander1 9 GPIO_ACTIVE_HIGH>;
+		tx-fault-gpio = <&cp2_module_expander1 8 GPIO_ACTIVE_HIGH>;
+		/*
+		 * SFP cages are unconnected on early PCBs because of an the I2C
+		 * lanes not being connected. Prevent the port for being
+		 * unusable by disabling the SFP node.
+		 */
+		status = "disabled";
+	};
+};
+
+/*
+ * Instantiate the second slave CP115
+ */
+
+#define CP11X_NAME		cp2
+#define CP11X_BASE		f6000000
+#define CP11X_PCIEx_MEM_BASE(iface) (0xe5000000 + (iface * 0x1000000))
+#define CP11X_PCIEx_MEM_SIZE(iface) 0xf00000
+#define CP11X_PCIE0_BASE	f6600000
+#define CP11X_PCIE1_BASE	f6620000
+#define CP11X_PCIE2_BASE	f6640000
+
+#include "armada-cp115.dtsi"
+
+#undef CP11X_NAME
+#undef CP11X_BASE
+#undef CP11X_PCIEx_MEM_BASE
+#undef CP11X_PCIEx_MEM_SIZE
+#undef CP11X_PCIE0_BASE
+#undef CP11X_PCIE1_BASE
+#undef CP11X_PCIE2_BASE
+
+&cp2_crypto {
+	status = "disabled";
+};
+
+&cp2_ethernet {
+	status = "okay";
+};
+
+/* SLM-1521-V2, CON9 */
+&cp2_eth0 {
+	status = "disabled";
+	phy-mode = "10gbase-kr";
+	/* Generic PHY, providing serdes lanes */
+	phys = <&cp2_comphy4 0>;
+	managed = "in-band-status";
+	sfp = <&cp2_sfp_eth0>;
+};
+
+&cp2_gpio1 {
+	status = "okay";
+};
+
+&cp2_gpio2 {
+	status = "okay";
+};
+
+&cp2_i2c0 {
+	clock-frequency = <100000>;
+
+	/* SLM-1521-V2 - U3 */
+	i2c-mux@72 {
+		compatible = "nxp,pca9544";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		reg = <0x72>;
+		cp2_sfpp0_i2c: i2c@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0>;
+		};
+
+		i2c@1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <1>;
+			/* U12 */
+			cp2_module_expander1: pca9555@21 {
+				compatible = "nxp,pca9555";
+				pinctrl-names = "default";
+				gpio-controller;
+				#gpio-cells = <2>;
+				reg = <0x21>;
+			};
+		};
+	};
+};
+
+/* SLM-1521-V2, CON6 */
+&cp2_pcie0 {
+	status = "okay";
+	num-lanes = <2>;
+	num-viewport = <8>;
+	/* Generic PHY, providing serdes lanes */
+	phys = <&cp2_comphy0 0
+		&cp2_comphy1 0>;
+};
+
+/* SLM-1521-V2, CON8 */
+&cp2_pcie2 {
+	status = "okay";
+	num-lanes = <1>;
+	num-viewport = <8>;
+	/* Generic PHY, providing serdes lanes */
+	phys = <&cp2_comphy5 2>;
+};
+
+&cp2_sata0 {
+	status = "okay";
+
+	/* SLM-1521-V2, CON4 */
+	sata-port@0 {
+		/* Generic PHY, providing serdes lanes */
+		phys = <&cp2_comphy2 0>;
+	};
+};
+
+/* CON 2 on SLM-1683 - microSD */
+&cp2_sdhci0 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&cp2_sdhci_pins>;
+	bus-width = <4>;
+	cd-gpios = <&cp2_gpio2 23 GPIO_ACTIVE_LOW>;
+	vqmmc-supply = <&cp2_reg_sd_vccq>;
+};
+
+&cp2_syscon0 {
+	cp2_pinctrl: pinctrl {
+		compatible = "marvell,cp115-standalone-pinctrl";
+
+		cp2_i2c0_pins: cp2-i2c-pins-0 {
+			marvell,pins = "mpp37", "mpp38";
+			marvell,function = "i2c0";
+		};
+		cp2_sdhci_pins: cp2-sdhi-pins-0 {
+			marvell,pins = "mpp56", "mpp57", "mpp58",
+				       "mpp59", "mpp60", "mpp61";
+			marvell,function = "sdio";
+		};
+	};
+};
+
+&cp2_usb3_0 {
+	status = "okay";
+	usb-phy = <&cp2_usb3_0_phy0>;
+	phy-names = "usb";
+};
+
+/* SLM-1521-V2, CON11 */
+&cp2_usb3_1 {
+	status = "okay";
+	usb-phy = <&cp2_usb3_0_phy1>;
+	phy-names = "usb";
+	/* Generic PHY, providing serdes lanes */
+	phys = <&cp2_comphy3 1>;
+};