summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
authorDavid S. Miller <davem@davemloft.net>2017-08-02 03:42:58 +0300
committerDavid S. Miller <davem@davemloft.net>2017-08-02 03:42:58 +0300
commit906a039d2f92c910e5c79a52da018b262bcd73b2 (patch)
tree1353a895f843176d47b4456af042b67713475336
parentc613c209c3f351d47158f728271d0c73b6dd24c6 (diff)
parentd829b9e230f4138fb6194e854e1bb46f737f1c3d (diff)
downloadlinux-906a039d2f92c910e5c79a52da018b262bcd73b2.tar.xz
Merge branch 'for-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth-next
Johan Hedberg says: ==================== pull request: bluetooth-next 2017-08-01 Here's our first batch of Bluetooth patches for the 4.14 kernel: - Several new USB IDs for the btusb driver - Memory leak fix in btusb driver - Cleanups & fixes to hci_nokia, hci_serdev and hci_bcm drivers - Fixed cleanup path in mrf24j40 (802.15.4) driver probe function - A few other smaller cleanups & fixes to drivers Please let me know if there are any issues pulling. Thanks. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
-rw-r--r--drivers/bluetooth/Kconfig1
-rw-r--r--drivers/bluetooth/ath3k.c3
-rw-r--r--drivers/bluetooth/bt3c_cs.c8
-rw-r--r--drivers/bluetooth/btmrvl_sdio.c6
-rw-r--r--drivers/bluetooth/btqca.c2
-rw-r--r--drivers/bluetooth/btrtl.c2
-rw-r--r--drivers/bluetooth/btsdio.c3
-rw-r--r--drivers/bluetooth/btuart_cs.c8
-rw-r--r--drivers/bluetooth/btusb.c44
-rw-r--r--drivers/bluetooth/btwilink.c8
-rw-r--r--drivers/bluetooth/hci_bcm.c30
-rw-r--r--drivers/bluetooth/hci_h4.c2
-rw-r--r--drivers/bluetooth/hci_ldisc.c3
-rw-r--r--drivers/bluetooth/hci_ll.c11
-rw-r--r--drivers/bluetooth/hci_nokia.c10
-rw-r--r--drivers/bluetooth/hci_serdev.c13
-rw-r--r--drivers/bluetooth/hci_uart.h1
-rw-r--r--drivers/net/ieee802154/mrf24j40.c3
18 files changed, 101 insertions, 57 deletions
diff --git a/drivers/bluetooth/Kconfig b/drivers/bluetooth/Kconfig
index 35952a94875e..3a6ead603e49 100644
--- a/drivers/bluetooth/Kconfig
+++ b/drivers/bluetooth/Kconfig
@@ -98,6 +98,7 @@ config BT_HCIUART_NOKIA
depends on BT_HCIUART_SERDEV
depends on PM
select BT_HCIUART_H4
+ select BT_BCM
help
Nokia H4+ is serial protocol for communication between Bluetooth
device and host. This protocol is required for Bluetooth devices
diff --git a/drivers/bluetooth/ath3k.c b/drivers/bluetooth/ath3k.c
index b793853ff05f..204afe66de92 100644
--- a/drivers/bluetooth/ath3k.c
+++ b/drivers/bluetooth/ath3k.c
@@ -140,7 +140,8 @@ MODULE_DEVICE_TABLE(usb, ath3k_table);
#define BTUSB_ATH3012 0x80
/* This table is to load patch and sysconfig files
- * for AR3012 */
+ * for AR3012
+ */
static const struct usb_device_id ath3k_blist_tbl[] = {
/* Atheros AR3012 with sflash firmware*/
diff --git a/drivers/bluetooth/bt3c_cs.c b/drivers/bluetooth/bt3c_cs.c
index 32dcac017395..194788739a83 100644
--- a/drivers/bluetooth/bt3c_cs.c
+++ b/drivers/bluetooth/bt3c_cs.c
@@ -684,14 +684,16 @@ static int bt3c_config(struct pcmcia_device *link)
unsigned long try;
/* First pass: look for a config entry that looks normal.
- Two tries: without IO aliases, then with aliases */
+ * Two tries: without IO aliases, then with aliases
+ */
for (try = 0; try < 2; try++)
if (!pcmcia_loop_config(link, bt3c_check_config, (void *) try))
goto found_port;
/* Second pass: try to find an entry that isn't picky about
- its base address, then try to grab any standard serial port
- address, and finally try to get any free port. */
+ * its base address, then try to grab any standard serial port
+ * address, and finally try to get any free port.
+ */
if (!pcmcia_loop_config(link, bt3c_check_config_notpicky, NULL))
goto found_port;
diff --git a/drivers/bluetooth/btmrvl_sdio.c b/drivers/bluetooth/btmrvl_sdio.c
index eb794f08b238..03341ce98c32 100644
--- a/drivers/bluetooth/btmrvl_sdio.c
+++ b/drivers/bluetooth/btmrvl_sdio.c
@@ -1455,7 +1455,8 @@ done:
fw_dump_ptr = fw_dump_data;
/* Dump all the memory data into single file, a userspace script will
- be used to split all the memory data to multiple files*/
+ * be used to split all the memory data to multiple files
+ */
BT_INFO("== btmrvl firmware dump to /sys/class/devcoredump start");
for (idx = 0; idx < dump_num; idx++) {
struct memory_type_mapping *entry = &mem_type_mapping_tbl[idx];
@@ -1482,7 +1483,8 @@ done:
}
/* fw_dump_data will be free in device coredump release function
- after 5 min*/
+ * after 5 min
+ */
dev_coredumpv(&card->func->dev, fw_dump_data, fw_dump_len, GFP_KERNEL);
BT_INFO("== btmrvl firmware dump to /sys/class/devcoredump end");
}
diff --git a/drivers/bluetooth/btqca.c b/drivers/bluetooth/btqca.c
index 28afd5d585f9..0bbdfcef2aa8 100644
--- a/drivers/bluetooth/btqca.c
+++ b/drivers/bluetooth/btqca.c
@@ -81,7 +81,7 @@ static int rome_patch_ver_req(struct hci_dev *hdev, u32 *rome_version)
* and lower 2 bytes from patch will be used.
*/
*rome_version = (le32_to_cpu(ver->soc_id) << 16) |
- (le16_to_cpu(ver->rome_ver) & 0x0000ffff);
+ (le16_to_cpu(ver->rome_ver) & 0x0000ffff);
out:
kfree_skb(skb);
diff --git a/drivers/bluetooth/btrtl.c b/drivers/bluetooth/btrtl.c
index 8279094dd713..d9a99b4302ea 100644
--- a/drivers/bluetooth/btrtl.c
+++ b/drivers/bluetooth/btrtl.c
@@ -279,6 +279,8 @@ static int rtl_load_config(struct hci_dev *hdev, const char *name, u8 **buff)
return ret;
ret = fw->size;
*buff = kmemdup(fw->data, ret, GFP_KERNEL);
+ if (!*buff)
+ ret = -ENOMEM;
release_firmware(fw);
diff --git a/drivers/bluetooth/btsdio.c b/drivers/bluetooth/btsdio.c
index 1cb958e199eb..c8e945d19ffe 100644
--- a/drivers/bluetooth/btsdio.c
+++ b/drivers/bluetooth/btsdio.c
@@ -144,7 +144,8 @@ static int btsdio_rx_packet(struct btsdio_data *data)
if (!skb) {
/* Out of memory. Prepare a read retry and just
* return with the expectation that the next time
- * we're called we'll have more memory. */
+ * we're called we'll have more memory.
+ */
return -ENOMEM;
}
diff --git a/drivers/bluetooth/btuart_cs.c b/drivers/bluetooth/btuart_cs.c
index 7df79bb12350..310e9c2e09b6 100644
--- a/drivers/bluetooth/btuart_cs.c
+++ b/drivers/bluetooth/btuart_cs.c
@@ -614,14 +614,16 @@ static int btuart_config(struct pcmcia_device *link)
int try;
/* First pass: look for a config entry that looks normal.
- Two tries: without IO aliases, then with aliases */
+ * Two tries: without IO aliases, then with aliases
+ */
for (try = 0; try < 2; try++)
if (!pcmcia_loop_config(link, btuart_check_config, &try))
goto found_port;
/* Second pass: try to find an entry that isn't picky about
- its base address, then try to grab any standard serial port
- address, and finally try to get any free port. */
+ * its base address, then try to grab any standard serial port
+ * address, and finally try to get any free port.
+ */
if (!pcmcia_loop_config(link, btuart_check_config_notpicky, NULL))
goto found_port;
diff --git a/drivers/bluetooth/btusb.c b/drivers/bluetooth/btusb.c
index fa24d693af24..24cc8383fdd4 100644
--- a/drivers/bluetooth/btusb.c
+++ b/drivers/bluetooth/btusb.c
@@ -131,7 +131,8 @@ static const struct usb_device_id btusb_table[] = {
{ USB_DEVICE(0x19ff, 0x0239), .driver_info = BTUSB_BCM_PATCHRAM },
/* Broadcom BCM43142A0 (Foxconn/Lenovo) */
- { USB_DEVICE(0x105b, 0xe065), .driver_info = BTUSB_BCM_PATCHRAM },
+ { USB_VENDOR_AND_INTERFACE_INFO(0x105b, 0xff, 0x01, 0x01),
+ .driver_info = BTUSB_BCM_PATCHRAM },
/* Broadcom BCM920703 (HTC Vive) */
{ USB_VENDOR_AND_INTERFACE_INFO(0x0bb4, 0xff, 0x01, 0x01),
@@ -268,6 +269,7 @@ static const struct usb_device_id blacklist_table[] = {
{ USB_DEVICE(0x0489, 0xe092), .driver_info = BTUSB_QCA_ROME },
{ USB_DEVICE(0x0489, 0xe0a2), .driver_info = BTUSB_QCA_ROME },
{ USB_DEVICE(0x04ca, 0x3011), .driver_info = BTUSB_QCA_ROME },
+ { USB_DEVICE(0x04ca, 0x3016), .driver_info = BTUSB_QCA_ROME },
/* Broadcom BCM2035 */
{ USB_DEVICE(0x0a5c, 0x2009), .driver_info = BTUSB_BCM92035 },
@@ -656,7 +658,8 @@ static void btusb_intr_complete(struct urb *urb)
err = usb_submit_urb(urb, GFP_ATOMIC);
if (err < 0) {
/* -EPERM: urb is being killed;
- * -ENODEV: device got disconnected */
+ * -ENODEV: device got disconnected
+ */
if (err != -EPERM && err != -ENODEV)
BT_ERR("%s urb %p failed to resubmit (%d)",
hdev->name, urb, -err);
@@ -745,7 +748,8 @@ static void btusb_bulk_complete(struct urb *urb)
err = usb_submit_urb(urb, GFP_ATOMIC);
if (err < 0) {
/* -EPERM: urb is being killed;
- * -ENODEV: device got disconnected */
+ * -ENODEV: device got disconnected
+ */
if (err != -EPERM && err != -ENODEV)
BT_ERR("%s urb %p failed to resubmit (%d)",
hdev->name, urb, -err);
@@ -840,7 +844,8 @@ static void btusb_isoc_complete(struct urb *urb)
err = usb_submit_urb(urb, GFP_ATOMIC);
if (err < 0) {
/* -EPERM: urb is being killed;
- * -ENODEV: device got disconnected */
+ * -ENODEV: device got disconnected
+ */
if (err != -EPERM && err != -ENODEV)
BT_ERR("%s urb %p failed to resubmit (%d)",
hdev->name, urb, -err);
@@ -952,7 +957,8 @@ static void btusb_diag_complete(struct urb *urb)
err = usb_submit_urb(urb, GFP_ATOMIC);
if (err < 0) {
/* -EPERM: urb is being killed;
- * -ENODEV: device got disconnected */
+ * -ENODEV: device got disconnected
+ */
if (err != -EPERM && err != -ENODEV)
BT_ERR("%s urb %p failed to resubmit (%d)",
hdev->name, urb, -err);
@@ -2896,7 +2902,8 @@ static int btusb_probe(struct usb_interface *intf,
struct usb_device *udev = interface_to_usbdev(intf);
/* Old firmware would otherwise let ath3k driver load
- * patch and sysconfig files */
+ * patch and sysconfig files
+ */
if (le16_to_cpu(udev->descriptor.bcdDevice) <= 0x0001)
return -ENODEV;
}
@@ -3067,6 +3074,12 @@ static int btusb_probe(struct usb_interface *intf,
if (id->driver_info & BTUSB_QCA_ROME) {
data->setup_on_usb = btusb_setup_qca;
hdev->set_bdaddr = btusb_set_bdaddr_ath3012;
+
+ /* QCA Rome devices lose their updated firmware over suspend,
+ * but the USB hub doesn't notice any status change.
+ * Explicitly request a device reset on resume.
+ */
+ set_bit(BTUSB_RESET_RESUME, &data->flags);
}
#ifdef CONFIG_BT_HCIBTUSB_RTL
@@ -3259,13 +3272,28 @@ static void play_deferred(struct btusb_data *data)
int err;
while ((urb = usb_get_from_anchor(&data->deferred))) {
+ usb_anchor_urb(urb, &data->tx_anchor);
+
err = usb_submit_urb(urb, GFP_ATOMIC);
- if (err < 0)
+ if (err < 0) {
+ if (err != -EPERM && err != -ENODEV)
+ BT_ERR("%s urb %p submission failed (%d)",
+ data->hdev->name, urb, -err);
+ kfree(urb->setup_packet);
+ usb_unanchor_urb(urb);
+ usb_free_urb(urb);
break;
+ }
data->tx_in_flight++;
+ usb_free_urb(urb);
+ }
+
+ /* Cleanup the rest deferred urbs. */
+ while ((urb = usb_get_from_anchor(&data->deferred))) {
+ kfree(urb->setup_packet);
+ usb_free_urb(urb);
}
- usb_scuttle_anchored_urbs(&data->deferred);
}
static int btusb_resume(struct usb_interface *intf)
diff --git a/drivers/bluetooth/btwilink.c b/drivers/bluetooth/btwilink.c
index 85a3978b064f..5ef8000f90a9 100644
--- a/drivers/bluetooth/btwilink.c
+++ b/drivers/bluetooth/btwilink.c
@@ -93,8 +93,7 @@ static void st_reg_completion_cb(void *priv_data, int data)
complete(&lhst->wait_reg_completion);
}
-/* Called by Shared Transport layer when receive data is
- * available */
+/* Called by Shared Transport layer when receive data is available */
static long st_receive(void *priv_data, struct sk_buff *skb)
{
struct ti_st *lhst = priv_data;
@@ -198,7 +197,8 @@ static int ti_st_open(struct hci_dev *hdev)
}
/* Is ST registration callback
- * called with ERROR status? */
+ * called with ERROR status?
+ */
if (hst->reg_status != 0) {
BT_ERR("ST registration completed with invalid "
"status %d", hst->reg_status);
@@ -276,7 +276,7 @@ static int ti_st_send_frame(struct hci_dev *hdev, struct sk_buff *skb)
static int bt_ti_probe(struct platform_device *pdev)
{
- static struct ti_st *hst;
+ struct ti_st *hst;
struct hci_dev *hdev;
int err;
diff --git a/drivers/bluetooth/hci_bcm.c b/drivers/bluetooth/hci_bcm.c
index 6a662d0161b4..6b42372c53ef 100644
--- a/drivers/bluetooth/hci_bcm.c
+++ b/drivers/bluetooth/hci_bcm.c
@@ -176,7 +176,7 @@ static irqreturn_t bcm_host_wake(int irq, void *data)
static int bcm_request_irq(struct bcm_data *bcm)
{
struct bcm_device *bdev = bcm->dev;
- int err = 0;
+ int err;
/* If this is not a platform device, do not enable PM functionalities */
mutex_lock(&bcm_device_lock);
@@ -185,21 +185,23 @@ static int bcm_request_irq(struct bcm_data *bcm)
goto unlock;
}
- if (bdev->irq > 0) {
- err = devm_request_irq(&bdev->pdev->dev, bdev->irq,
- bcm_host_wake, IRQF_TRIGGER_RISING,
- "host_wake", bdev);
- if (err)
- goto unlock;
+ if (bdev->irq <= 0) {
+ err = -EOPNOTSUPP;
+ goto unlock;
+ }
- device_init_wakeup(&bdev->pdev->dev, true);
+ err = devm_request_irq(&bdev->pdev->dev, bdev->irq, bcm_host_wake,
+ IRQF_TRIGGER_RISING, "host_wake", bdev);
+ if (err)
+ goto unlock;
- pm_runtime_set_autosuspend_delay(&bdev->pdev->dev,
- BCM_AUTOSUSPEND_DELAY);
- pm_runtime_use_autosuspend(&bdev->pdev->dev);
- pm_runtime_set_active(&bdev->pdev->dev);
- pm_runtime_enable(&bdev->pdev->dev);
- }
+ device_init_wakeup(&bdev->pdev->dev, true);
+
+ pm_runtime_set_autosuspend_delay(&bdev->pdev->dev,
+ BCM_AUTOSUSPEND_DELAY);
+ pm_runtime_use_autosuspend(&bdev->pdev->dev);
+ pm_runtime_set_active(&bdev->pdev->dev);
+ pm_runtime_enable(&bdev->pdev->dev);
unlock:
mutex_unlock(&bcm_device_lock);
diff --git a/drivers/bluetooth/hci_h4.c b/drivers/bluetooth/hci_h4.c
index 4e328d7d47bb..3b82a87224a9 100644
--- a/drivers/bluetooth/hci_h4.c
+++ b/drivers/bluetooth/hci_h4.c
@@ -172,7 +172,7 @@ struct sk_buff *h4_recv_buf(struct hci_dev *hdev, struct sk_buff *skb,
const struct h4_recv_pkt *pkts, int pkts_count)
{
struct hci_uart *hu = hci_get_drvdata(hdev);
- u8 alignment = hu->alignment;
+ u8 alignment = hu->alignment ? hu->alignment : 1;
while (count) {
int i, len;
diff --git a/drivers/bluetooth/hci_ldisc.c b/drivers/bluetooth/hci_ldisc.c
index 8397b716fa65..a746627e784e 100644
--- a/drivers/bluetooth/hci_ldisc.c
+++ b/drivers/bluetooth/hci_ldisc.c
@@ -457,7 +457,8 @@ static int hci_uart_tty_open(struct tty_struct *tty)
BT_DBG("tty %p", tty);
/* Error if the tty has no write op instead of leaving an exploitable
- hole */
+ * hole
+ */
if (tty->ops->write == NULL)
return -EOPNOTSUPP;
diff --git a/drivers/bluetooth/hci_ll.c b/drivers/bluetooth/hci_ll.c
index c982943f0747..424c15aa7bb7 100644
--- a/drivers/bluetooth/hci_ll.c
+++ b/drivers/bluetooth/hci_ll.c
@@ -622,7 +622,8 @@ static int download_firmware(struct ll_device *lldev)
cmd = (struct hci_command *)action_ptr;
if (cmd->opcode == 0xff36) {
/* ignore remote change
- * baud rate HCI VS command */
+ * baud rate HCI VS command
+ */
bt_dev_warn(lldev->hu.hdev, "change remote baud rate command in firmware");
break;
}
@@ -742,14 +743,8 @@ static int hci_ti_probe(struct serdev_device *serdev)
static void hci_ti_remove(struct serdev_device *serdev)
{
struct ll_device *lldev = serdev_device_get_drvdata(serdev);
- struct hci_uart *hu = &lldev->hu;
- struct hci_dev *hdev = hu->hdev;
- cancel_work_sync(&hu->write_work);
-
- hci_unregister_dev(hdev);
- hci_free_dev(hdev);
- hu->proto->close(hu);
+ hci_uart_unregister_device(&lldev->hu);
}
static const struct of_device_id hci_ti_of_match[] = {
diff --git a/drivers/bluetooth/hci_nokia.c b/drivers/bluetooth/hci_nokia.c
index 181a15b549e5..3539fd03f47e 100644
--- a/drivers/bluetooth/hci_nokia.c
+++ b/drivers/bluetooth/hci_nokia.c
@@ -767,16 +767,8 @@ static int nokia_bluetooth_serdev_probe(struct serdev_device *serdev)
static void nokia_bluetooth_serdev_remove(struct serdev_device *serdev)
{
struct nokia_bt_dev *btdev = serdev_device_get_drvdata(serdev);
- struct hci_uart *hu = &btdev->hu;
- struct hci_dev *hdev = hu->hdev;
- cancel_work_sync(&hu->write_work);
-
- hci_unregister_dev(hdev);
- hci_free_dev(hdev);
- hu->proto->close(hu);
-
- pm_runtime_disable(&btdev->serdev->dev);
+ hci_uart_unregister_device(&btdev->hu);
}
static int nokia_bluetooth_runtime_suspend(struct device *dev)
diff --git a/drivers/bluetooth/hci_serdev.c b/drivers/bluetooth/hci_serdev.c
index aea930101dd2..b725ac4f7ff6 100644
--- a/drivers/bluetooth/hci_serdev.c
+++ b/drivers/bluetooth/hci_serdev.c
@@ -354,3 +354,16 @@ err_alloc:
return err;
}
EXPORT_SYMBOL_GPL(hci_uart_register_device);
+
+void hci_uart_unregister_device(struct hci_uart *hu)
+{
+ struct hci_dev *hdev = hu->hdev;
+
+ hci_unregister_dev(hdev);
+ hci_free_dev(hdev);
+
+ cancel_work_sync(&hu->write_work);
+
+ hu->proto->close(hu);
+}
+EXPORT_SYMBOL_GPL(hci_uart_unregister_device);
diff --git a/drivers/bluetooth/hci_uart.h b/drivers/bluetooth/hci_uart.h
index c6e9e1cf63f8..d9cd95d81149 100644
--- a/drivers/bluetooth/hci_uart.h
+++ b/drivers/bluetooth/hci_uart.h
@@ -112,6 +112,7 @@ struct hci_uart {
int hci_uart_register_proto(const struct hci_uart_proto *p);
int hci_uart_unregister_proto(const struct hci_uart_proto *p);
int hci_uart_register_device(struct hci_uart *hu, const struct hci_uart_proto *p);
+void hci_uart_unregister_device(struct hci_uart *hu);
int hci_uart_tx_wakeup(struct hci_uart *hu);
int hci_uart_init_ready(struct hci_uart *hu);
diff --git a/drivers/net/ieee802154/mrf24j40.c b/drivers/net/ieee802154/mrf24j40.c
index 7d334963dc08..ee7084b2d52d 100644
--- a/drivers/net/ieee802154/mrf24j40.c
+++ b/drivers/net/ieee802154/mrf24j40.c
@@ -1330,7 +1330,8 @@ static int mrf24j40_probe(struct spi_device *spi)
if (spi->max_speed_hz > MAX_SPI_SPEED_HZ) {
dev_warn(&spi->dev, "spi clock above possible maximum: %d",
MAX_SPI_SPEED_HZ);
- return -EINVAL;
+ ret = -EINVAL;
+ goto err_register_device;
}
ret = mrf24j40_hw_init(devrec);