e1000e: consolidate two dbug macros into one simpler one

This patch depends on a previous one that cleans up redundant #includes.

Signed-off-by: Bruce Allan <bruce.w.allan@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

8 files changed, 183 insertions, 206 deletions

diff --git a/drivers/net/e1000e/82571.c b/drivers/net/e1000e/82571.c
index 407637f6c331..680b7c703062 100644
--- a/drivers/net/e1000e/82571.c
+++ b/drivers/net/e1000e/82571.c
@@ -309,7 +309,7 @@ static s32 e1000_init_mac_params_82571(struct e1000_adapter *adapter)
 			 * indicates that the bootagent or EFI code has
 			 * improperly left this bit enabled
 			 */
-			hw_dbg(hw, "Please update your 82571 Bootagent\n");
+			e_dbg("Please update your 82571 Bootagent\n");
 		}
 		ew32(SWSM, swsm & ~E1000_SWSM_SMBI);
 	}
@@ -483,7 +483,7 @@ static s32 e1000_get_hw_semaphore_82571(struct e1000_hw *hw)
 	}
 
 	if (i == sw_timeout) {
-		hw_dbg(hw, "Driver can't access device - SMBI bit is set.\n");
+		e_dbg("Driver can't access device - SMBI bit is set.\n");
 		hw->dev_spec.e82571.smb_counter++;
 	}
 	/* Get the FW semaphore. */
@@ -501,7 +501,7 @@ static s32 e1000_get_hw_semaphore_82571(struct e1000_hw *hw)
 	if (i == fw_timeout) {
 		/* Release semaphores */
 		e1000_put_hw_semaphore_82571(hw);
-		hw_dbg(hw, "Driver can't access the NVM\n");
+		e_dbg("Driver can't access the NVM\n");
 		return -E1000_ERR_NVM;
 	}
 
@@ -708,7 +708,7 @@ static s32 e1000_write_nvm_eewr_82571(struct e1000_hw *hw, u16 offset,
 	 */
 	if ((offset >= nvm->word_size) || (words > (nvm->word_size - offset)) ||
 	    (words == 0)) {
-		hw_dbg(hw, "nvm parameter(s) out of bounds\n");
+		e_dbg("nvm parameter(s) out of bounds\n");
 		return -E1000_ERR_NVM;
 	}
 
@@ -749,7 +749,7 @@ static s32 e1000_get_cfg_done_82571(struct e1000_hw *hw)
 		timeout--;
 	}
 	if (!timeout) {
-		hw_dbg(hw, "MNG configuration cycle has not completed.\n");
+		e_dbg("MNG configuration cycle has not completed.\n");
 		return -E1000_ERR_RESET;
 	}
 
@@ -848,9 +848,9 @@ static s32 e1000_reset_hw_82571(struct e1000_hw *hw)
 	 */
 	ret_val = e1000e_disable_pcie_master(hw);
 	if (ret_val)
-		hw_dbg(hw, "PCI-E Master disable polling has failed.\n");
+		e_dbg("PCI-E Master disable polling has failed.\n");
 
-	hw_dbg(hw, "Masking off all interrupts\n");
+	e_dbg("Masking off all interrupts\n");
 	ew32(IMC, 0xffffffff);
 
 	ew32(RCTL, 0);
@@ -889,7 +889,7 @@ static s32 e1000_reset_hw_82571(struct e1000_hw *hw)
 
 	ctrl = er32(CTRL);
 
-	hw_dbg(hw, "Issuing a global reset to MAC\n");
+	e_dbg("Issuing a global reset to MAC\n");
 	ew32(CTRL, ctrl | E1000_CTRL_RST);
 
 	if (hw->nvm.type == e1000_nvm_flash_hw) {
@@ -955,12 +955,12 @@ static s32 e1000_init_hw_82571(struct e1000_hw *hw)
 	/* Initialize identification LED */
 	ret_val = e1000e_id_led_init(hw);
 	if (ret_val) {
-		hw_dbg(hw, "Error initializing identification LED\n");
+		e_dbg("Error initializing identification LED\n");
 		return ret_val;
 	}
 
 	/* Disabling VLAN filtering */
-	hw_dbg(hw, "Initializing the IEEE VLAN\n");
+	e_dbg("Initializing the IEEE VLAN\n");
 	e1000e_clear_vfta(hw);
 
 	/* Setup the receive address. */
@@ -974,7 +974,7 @@ static s32 e1000_init_hw_82571(struct e1000_hw *hw)
 	e1000e_init_rx_addrs(hw, rar_count);
 
 	/* Zero out the Multicast HASH table */
-	hw_dbg(hw, "Zeroing the MTA\n");
+	e_dbg("Zeroing the MTA\n");
 	for (i = 0; i < mac->mta_reg_count; i++)
 		E1000_WRITE_REG_ARRAY(hw, E1000_MTA, i, 0);
 
@@ -1383,7 +1383,7 @@ static s32 e1000_check_for_serdes_link_82571(struct e1000_hw *hw)
 				 */
 				mac->serdes_link_state =
 				    e1000_serdes_link_autoneg_progress;
-				hw_dbg(hw, "AN_UP     -> AN_PROG\n");
+				e_dbg("AN_UP     -> AN_PROG\n");
 			}
 		break;
 
@@ -1401,7 +1401,7 @@ static s32 e1000_check_for_serdes_link_82571(struct e1000_hw *hw)
 				    (ctrl & ~E1000_CTRL_SLU));
 				mac->serdes_link_state =
 				    e1000_serdes_link_autoneg_progress;
-				hw_dbg(hw, "FORCED_UP -> AN_PROG\n");
+				e_dbg("FORCED_UP -> AN_PROG\n");
 			}
 			break;
 
@@ -1415,7 +1415,7 @@ static s32 e1000_check_for_serdes_link_82571(struct e1000_hw *hw)
 			if (status & E1000_STATUS_LU)  {
 				mac->serdes_link_state =
 				    e1000_serdes_link_autoneg_complete;
-				hw_dbg(hw, "AN_PROG   -> AN_UP\n");
+				e_dbg("AN_PROG   -> AN_UP\n");
 			} else {
 				/*
 				 * Disable autoneg, force link up and
@@ -1430,12 +1430,12 @@ static s32 e1000_check_for_serdes_link_82571(struct e1000_hw *hw)
 				ret_val =
 				    e1000e_config_fc_after_link_up(hw);
 				if (ret_val) {
-					hw_dbg(hw, "Error config flow control\n");
+					e_dbg("Error config flow control\n");
 					break;
 				}
 				mac->serdes_link_state =
 				    e1000_serdes_link_forced_up;
-				hw_dbg(hw, "AN_PROG   -> FORCED_UP\n");
+				e_dbg("AN_PROG   -> FORCED_UP\n");
 			}
 			mac->serdes_has_link = true;
 			break;
@@ -1450,14 +1450,14 @@ static s32 e1000_check_for_serdes_link_82571(struct e1000_hw *hw)
 			    (ctrl & ~E1000_CTRL_SLU));
 			mac->serdes_link_state =
 			    e1000_serdes_link_autoneg_progress;
-			hw_dbg(hw, "DOWN      -> AN_PROG\n");
+			e_dbg("DOWN      -> AN_PROG\n");
 			break;
 		}
 	} else {
 		if (!(rxcw & E1000_RXCW_SYNCH)) {
 			mac->serdes_has_link = false;
 			mac->serdes_link_state = e1000_serdes_link_down;
-			hw_dbg(hw, "ANYSTATE  -> DOWN\n");
+			e_dbg("ANYSTATE  -> DOWN\n");
 		} else {
 			/*
 			 * We have sync, and can tolerate one
@@ -1469,7 +1469,7 @@ static s32 e1000_check_for_serdes_link_82571(struct e1000_hw *hw)
 			if (rxcw & E1000_RXCW_IV) {
 				mac->serdes_link_state = e1000_serdes_link_down;
 				mac->serdes_has_link = false;
-				hw_dbg(hw, "ANYSTATE  -> DOWN\n");
+				e_dbg("ANYSTATE  -> DOWN\n");
 			}
 		}
 	}
@@ -1491,7 +1491,7 @@ static s32 e1000_valid_led_default_82571(struct e1000_hw *hw, u16 *data)
 
 	ret_val = e1000_read_nvm(hw, NVM_ID_LED_SETTINGS, 1, data);
 	if (ret_val) {
-		hw_dbg(hw, "NVM Read Error\n");
+		e_dbg("NVM Read Error\n");
 		return ret_val;
 	}
 
diff --git a/drivers/net/e1000e/e1000.h b/drivers/net/e1000e/e1000.h
index ac5d8552747b..dac00a023835 100644
--- a/drivers/net/e1000e/e1000.h
+++ b/drivers/net/e1000e/e1000.h
@@ -48,9 +48,9 @@ struct e1000_info;
 
 #ifdef DEBUG
 #define e_dbg(format, arg...) \
-	e_printk(KERN_DEBUG , adapter, format, ## arg)
+	e_printk(KERN_DEBUG , hw->adapter, format, ## arg)
 #else
-#define e_dbg(format, arg...) do { (void)(adapter); } while (0)
+#define e_dbg(format, arg...) do { (void)(hw); } while (0)
 #endif
 
 #define e_err(format, arg...) \
diff --git a/drivers/net/e1000e/es2lan.c b/drivers/net/e1000e/es2lan.c
index 6fd46f5f8a3c..f5601c5ff7af 100644
--- a/drivers/net/e1000e/es2lan.c
+++ b/drivers/net/e1000e/es2lan.c
@@ -394,8 +394,7 @@ static s32 e1000_acquire_swfw_sync_80003es2lan(struct e1000_hw *hw, u16 mask)
 	}
 
 	if (i == timeout) {
-		hw_dbg(hw,
-		       "Driver can't access resource, SW_FW_SYNC timeout.\n");
+		e_dbg("Driver can't access resource, SW_FW_SYNC timeout.\n");
 		return -E1000_ERR_SWFW_SYNC;
 	}
 
@@ -597,7 +596,7 @@ static s32 e1000_get_cfg_done_80003es2lan(struct e1000_hw *hw)
 		timeout--;
 	}
 	if (!timeout) {
-		hw_dbg(hw, "MNG configuration cycle has not completed.\n");
+		e_dbg("MNG configuration cycle has not completed.\n");
 		return -E1000_ERR_RESET;
 	}
 
@@ -630,7 +629,7 @@ static s32 e1000_phy_force_speed_duplex_80003es2lan(struct e1000_hw *hw)
 	if (ret_val)
 		return ret_val;
 
-	hw_dbg(hw, "GG82563 PSCR: %X\n", phy_data);
+	e_dbg("GG82563 PSCR: %X\n", phy_data);
 
 	ret_val = e1e_rphy(hw, PHY_CONTROL, &phy_data);
 	if (ret_val)
@@ -648,7 +647,7 @@ static s32 e1000_phy_force_speed_duplex_80003es2lan(struct e1000_hw *hw)
 	udelay(1);
 
 	if (hw->phy.autoneg_wait_to_complete) {
-		hw_dbg(hw, "Waiting for forced speed/duplex link "
+		e_dbg("Waiting for forced speed/duplex link "
 			 "on GG82563 phy.\n");
 
 		ret_val = e1000e_phy_has_link_generic(hw, PHY_FORCE_LIMIT,
@@ -771,9 +770,9 @@ static s32 e1000_reset_hw_80003es2lan(struct e1000_hw *hw)
 	 */
 	ret_val = e1000e_disable_pcie_master(hw);
 	if (ret_val)
-		hw_dbg(hw, "PCI-E Master disable polling has failed.\n");
+		e_dbg("PCI-E Master disable polling has failed.\n");
 
-	hw_dbg(hw, "Masking off all interrupts\n");
+	e_dbg("Masking off all interrupts\n");
 	ew32(IMC, 0xffffffff);
 
 	ew32(RCTL, 0);
@@ -785,7 +784,7 @@ static s32 e1000_reset_hw_80003es2lan(struct e1000_hw *hw)
 	ctrl = er32(CTRL);
 
 	ret_val = e1000_acquire_phy_80003es2lan(hw);
-	hw_dbg(hw, "Issuing a global reset to MAC\n");
+	e_dbg("Issuing a global reset to MAC\n");
 	ew32(CTRL, ctrl | E1000_CTRL_RST);
 	e1000_release_phy_80003es2lan(hw);
 
@@ -820,19 +819,19 @@ static s32 e1000_init_hw_80003es2lan(struct e1000_hw *hw)
 	/* Initialize identification LED */
 	ret_val = e1000e_id_led_init(hw);
 	if (ret_val) {
-		hw_dbg(hw, "Error initializing identification LED\n");
+		e_dbg("Error initializing identification LED\n");
 		return ret_val;
 	}
 
 	/* Disabling VLAN filtering */
-	hw_dbg(hw, "Initializing the IEEE VLAN\n");
+	e_dbg("Initializing the IEEE VLAN\n");
 	e1000e_clear_vfta(hw);
 
 	/* Setup the receive address. */
 	e1000e_init_rx_addrs(hw, mac->rar_entry_count);
 
 	/* Zero out the Multicast HASH table */
-	hw_dbg(hw, "Zeroing the MTA\n");
+	e_dbg("Zeroing the MTA\n");
 	for (i = 0; i < mac->mta_reg_count; i++)
 		E1000_WRITE_REG_ARRAY(hw, E1000_MTA, i, 0);
 
@@ -989,7 +988,7 @@ static s32 e1000_copper_link_setup_gg82563_80003es2lan(struct e1000_hw *hw)
 	/* SW Reset the PHY so all changes take effect */
 	ret_val = e1000e_commit_phy(hw);
 	if (ret_val) {
-		hw_dbg(hw, "Error Resetting the PHY\n");
+		e_dbg("Error Resetting the PHY\n");
 		return ret_val;
 	}
 
diff --git a/drivers/net/e1000e/hw.h b/drivers/net/e1000e/hw.h
index aaea41ef794d..44808b053fcc 100644
--- a/drivers/net/e1000e/hw.h
+++ b/drivers/net/e1000e/hw.h
@@ -925,15 +925,4 @@ struct e1000_hw {
 	} dev_spec;
 };
 
-#ifdef DEBUG
-#define hw_dbg(hw, format, arg...) \
-	printk(KERN_DEBUG "%s: " format, e1000e_get_hw_dev_name(hw), ##arg)
-#else
-static inline int __attribute__ ((format (printf, 2, 3)))
-hw_dbg(struct e1000_hw *hw, const char *format, ...)
-{
-	return 0;
-}
-#endif
-
 #endif
diff --git a/drivers/net/e1000e/ich8lan.c b/drivers/net/e1000e/ich8lan.c
index bef5e3333f2a..101a2714467e 100644
--- a/drivers/net/e1000e/ich8lan.c
+++ b/drivers/net/e1000e/ich8lan.c
@@ -368,7 +368,7 @@ static s32 e1000_init_nvm_params_ich8lan(struct e1000_hw *hw)
 
 	/* Can't read flash registers if the register set isn't mapped. */
 	if (!hw->flash_address) {
-		hw_dbg(hw, "ERROR: Flash registers not mapped\n");
+		e_dbg("ERROR: Flash registers not mapped\n");
 		return -E1000_ERR_CONFIG;
 	}
 
@@ -550,7 +550,7 @@ static s32 e1000_check_for_copper_link_ich8lan(struct e1000_hw *hw)
 	 */
 	ret_val = e1000e_config_fc_after_link_up(hw);
 	if (ret_val)
-		hw_dbg(hw, "Error configuring flow control\n");
+		e_dbg("Error configuring flow control\n");
 
 out:
 	return ret_val;
@@ -644,7 +644,7 @@ static s32 e1000_acquire_swflag_ich8lan(struct e1000_hw *hw)
 	}
 
 	if (!timeout) {
-		hw_dbg(hw, "SW/FW/HW has locked the resource for too long.\n");
+		e_dbg("SW/FW/HW has locked the resource for too long.\n");
 		ret_val = -E1000_ERR_CONFIG;
 		goto out;
 	}
@@ -664,7 +664,7 @@ static s32 e1000_acquire_swflag_ich8lan(struct e1000_hw *hw)
 	}
 
 	if (!timeout) {
-		hw_dbg(hw, "Failed to acquire the semaphore.\n");
+		e_dbg("Failed to acquire the semaphore.\n");
 		extcnf_ctrl &= ~E1000_EXTCNF_CTRL_SWFLAG;
 		ew32(EXTCNF_CTRL, extcnf_ctrl);
 		ret_val = -E1000_ERR_CONFIG;
@@ -773,12 +773,12 @@ static s32 e1000_phy_force_speed_duplex_ich8lan(struct e1000_hw *hw)
 	if (ret_val)
 		return ret_val;
 
-	hw_dbg(hw, "IFE PMC: %X\n", data);
+	e_dbg("IFE PMC: %X\n", data);
 
 	udelay(1);
 
 	if (phy->autoneg_wait_to_complete) {
-		hw_dbg(hw, "Waiting for forced speed/duplex link on IFE phy.\n");
+		e_dbg("Waiting for forced speed/duplex link on IFE phy.\n");
 
 		ret_val = e1000e_phy_has_link_generic(hw,
 						     PHY_FORCE_LIMIT,
@@ -788,7 +788,7 @@ static s32 e1000_phy_force_speed_duplex_ich8lan(struct e1000_hw *hw)
 			return ret_val;
 
 		if (!link)
-			hw_dbg(hw, "Link taking longer than expected.\n");
+			e_dbg("Link taking longer than expected.\n");
 
 		/* Try once more */
 		ret_val = e1000e_phy_has_link_generic(hw,
@@ -1203,7 +1203,7 @@ static void e1000_lan_init_done_ich8lan(struct e1000_hw *hw)
 	 * leave the PHY in a bad state possibly resulting in no link.
 	 */
 	if (loop == 0)
-		hw_dbg(hw, "LAN_INIT_DONE not set, increase timeout\n");
+		e_dbg("LAN_INIT_DONE not set, increase timeout\n");
 
 	/* Clear the Init Done bit for the next init event */
 	data = er32(STATUS);
@@ -1274,7 +1274,7 @@ static s32 e1000_get_phy_info_ife_ich8lan(struct e1000_hw *hw)
 		return ret_val;
 
 	if (!link) {
-		hw_dbg(hw, "Phy info is only valid if link is up\n");
+		e_dbg("Phy info is only valid if link is up\n");
 		return -E1000_ERR_CONFIG;
 	}
 
@@ -1604,7 +1604,7 @@ static s32 e1000_valid_nvm_bank_detect_ich8lan(struct e1000_hw *hw, u32 *bank)
 
 			return 0;
 		}
-		hw_dbg(hw, "Unable to determine valid NVM bank via EEC - "
+		e_dbg("Unable to determine valid NVM bank via EEC - "
 		       "reading flash signature\n");
 		/* fall-thru */
 	default:
@@ -1634,7 +1634,7 @@ static s32 e1000_valid_nvm_bank_detect_ich8lan(struct e1000_hw *hw, u32 *bank)
 			return 0;
 		}
 
-		hw_dbg(hw, "ERROR: No valid NVM bank present\n");
+		e_dbg("ERROR: No valid NVM bank present\n");
 		return -E1000_ERR_NVM;
 	}
 
@@ -1662,7 +1662,7 @@ static s32 e1000_read_nvm_ich8lan(struct e1000_hw *hw, u16 offset, u16 words,
 
 	if ((offset >= nvm->word_size) || (words > nvm->word_size - offset) ||
 	    (words == 0)) {
-		hw_dbg(hw, "nvm parameter(s) out of bounds\n");
+		e_dbg("nvm parameter(s) out of bounds\n");
 		ret_val = -E1000_ERR_NVM;
 		goto out;
 	}
@@ -1671,7 +1671,7 @@ static s32 e1000_read_nvm_ich8lan(struct e1000_hw *hw, u16 offset, u16 words,
 
 	ret_val = e1000_valid_nvm_bank_detect_ich8lan(hw, &bank);
 	if (ret_val) {
-		hw_dbg(hw, "Could not detect valid bank, assuming bank 0\n");
+		e_dbg("Could not detect valid bank, assuming bank 0\n");
 		bank = 0;
 	}
 
@@ -1697,7 +1697,7 @@ static s32 e1000_read_nvm_ich8lan(struct e1000_hw *hw, u16 offset, u16 words,
 
 out:
 	if (ret_val)
-		hw_dbg(hw, "NVM read error: %d\n", ret_val);
+		e_dbg("NVM read error: %d\n", ret_val);
 
 	return ret_val;
 }
@@ -1719,7 +1719,7 @@ static s32 e1000_flash_cycle_init_ich8lan(struct e1000_hw *hw)
 
 	/* Check if the flash descriptor is valid */
 	if (hsfsts.hsf_status.fldesvalid == 0) {
-		hw_dbg(hw, "Flash descriptor invalid.  "
+		e_dbg("Flash descriptor invalid.  "
 			 "SW Sequencing must be used.");
 		return -E1000_ERR_NVM;
 	}
@@ -1769,7 +1769,7 @@ static s32 e1000_flash_cycle_init_ich8lan(struct e1000_hw *hw)
 			hsfsts.hsf_status.flcdone = 1;
 			ew16flash(ICH_FLASH_HSFSTS, hsfsts.regval);
 		} else {
-			hw_dbg(hw, "Flash controller busy, cannot get access");
+			e_dbg("Flash controller busy, cannot get access");
 		}
 	}
 
@@ -1919,7 +1919,7 @@ static s32 e1000_read_flash_data_ich8lan(struct e1000_hw *hw, u32 offset,
 				/* Repeat for some time before giving up. */
 				continue;
 			} else if (hsfsts.hsf_status.flcdone == 0) {
-				hw_dbg(hw, "Timeout error - flash cycle "
+				e_dbg("Timeout error - flash cycle "
 					 "did not complete.");
 				break;
 			}
@@ -1947,7 +1947,7 @@ static s32 e1000_write_nvm_ich8lan(struct e1000_hw *hw, u16 offset, u16 words,
 
 	if ((offset >= nvm->word_size) || (words > nvm->word_size - offset) ||
 	    (words == 0)) {
-		hw_dbg(hw, "nvm parameter(s) out of bounds\n");
+		e_dbg("nvm parameter(s) out of bounds\n");
 		return -E1000_ERR_NVM;
 	}
 
@@ -1998,7 +1998,7 @@ static s32 e1000_update_nvm_checksum_ich8lan(struct e1000_hw *hw)
 	 */
 	ret_val =  e1000_valid_nvm_bank_detect_ich8lan(hw, &bank);
 	if (ret_val) {
-		hw_dbg(hw, "Could not detect valid bank, assuming bank 0\n");
+		e_dbg("Could not detect valid bank, assuming bank 0\n");
 		bank = 0;
 	}
 
@@ -2072,7 +2072,7 @@ static s32 e1000_update_nvm_checksum_ich8lan(struct e1000_hw *hw)
 	 */
 	if (ret_val) {
 		/* Possibly read-only, see e1000e_write_protect_nvm_ich8lan() */
-		hw_dbg(hw, "Flash commit failed.\n");
+		e_dbg("Flash commit failed.\n");
 		nvm->ops.release_nvm(hw);
 		goto out;
 	}
@@ -2128,7 +2128,7 @@ static s32 e1000_update_nvm_checksum_ich8lan(struct e1000_hw *hw)
 
 out:
 	if (ret_val)
-		hw_dbg(hw, "NVM update error: %d\n", ret_val);
+		e_dbg("NVM update error: %d\n", ret_val);
 
 	return ret_val;
 }
@@ -2278,7 +2278,7 @@ static s32 e1000_write_flash_data_ich8lan(struct e1000_hw *hw, u32 offset,
 			/* Repeat for some time before giving up. */
 			continue;
 		if (hsfsts.hsf_status.flcdone == 0) {
-			hw_dbg(hw, "Timeout error - flash cycle "
+			e_dbg("Timeout error - flash cycle "
 				 "did not complete.");
 			break;
 		}
@@ -2323,7 +2323,7 @@ static s32 e1000_retry_write_flash_byte_ich8lan(struct e1000_hw *hw,
 		return ret_val;
 
 	for (program_retries = 0; program_retries < 100; program_retries++) {
-		hw_dbg(hw, "Retrying Byte %2.2X at offset %u\n", byte, offset);
+		e_dbg("Retrying Byte %2.2X at offset %u\n", byte, offset);
 		udelay(100);
 		ret_val = e1000_write_flash_byte_ich8lan(hw, offset, byte);
 		if (!ret_val)
@@ -2458,7 +2458,7 @@ static s32 e1000_valid_led_default_ich8lan(struct e1000_hw *hw, u16 *data)
 
 	ret_val = e1000_read_nvm(hw, NVM_ID_LED_SETTINGS, 1, data);
 	if (ret_val) {
-		hw_dbg(hw, "NVM Read Error\n");
+		e_dbg("NVM Read Error\n");
 		return ret_val;
 	}
 
@@ -2588,10 +2588,10 @@ static s32 e1000_reset_hw_ich8lan(struct e1000_hw *hw)
 	 */
 	ret_val = e1000e_disable_pcie_master(hw);
 	if (ret_val) {
-		hw_dbg(hw, "PCI-E Master disable polling has failed.\n");
+		e_dbg("PCI-E Master disable polling has failed.\n");
 	}
 
-	hw_dbg(hw, "Masking off all interrupts\n");
+	e_dbg("Masking off all interrupts\n");
 	ew32(IMC, 0xffffffff);
 
 	/*
@@ -2643,7 +2643,7 @@ static s32 e1000_reset_hw_ich8lan(struct e1000_hw *hw)
 	}
 	ret_val = e1000_acquire_swflag_ich8lan(hw);
 	/* Whether or not the swflag was acquired, we need to reset the part */
-	hw_dbg(hw, "Issuing a global reset to ich8lan\n");
+	e_dbg("Issuing a global reset to ich8lan\n");
 	ew32(CTRL, (ctrl | E1000_CTRL_RST));
 	msleep(20);
 
@@ -2663,7 +2663,7 @@ static s32 e1000_reset_hw_ich8lan(struct e1000_hw *hw)
 			 * return with an error. This can happen in situations
 			 * where there is no eeprom and prevents getting link.
 			 */
-			hw_dbg(hw, "Auto Read Done did not complete\n");
+			e_dbg("Auto Read Done did not complete\n");
 		}
 	}
 	/* Dummy read to clear the phy wakeup bit after lcd reset */
@@ -2725,7 +2725,7 @@ static s32 e1000_init_hw_ich8lan(struct e1000_hw *hw)
 	/* Initialize identification LED */
 	ret_val = mac->ops.id_led_init(hw);
 	if (ret_val) {
-		hw_dbg(hw, "Error initializing identification LED\n");
+		e_dbg("Error initializing identification LED\n");
 		return ret_val;
 	}
 
@@ -2733,7 +2733,7 @@ static s32 e1000_init_hw_ich8lan(struct e1000_hw *hw)
 	e1000e_init_rx_addrs(hw, mac->rar_entry_count);
 
 	/* Zero out the Multicast HASH table */
-	hw_dbg(hw, "Zeroing the MTA\n");
+	e_dbg("Zeroing the MTA\n");
 	for (i = 0; i < mac->mta_reg_count; i++)
 		E1000_WRITE_REG_ARRAY(hw, E1000_MTA, i, 0);
 
@@ -2879,7 +2879,7 @@ static s32 e1000_setup_link_ich8lan(struct e1000_hw *hw)
 	 */
 	hw->fc.current_mode = hw->fc.requested_mode;
 
-	hw_dbg(hw, "After fix-ups FlowControl is now = %x\n",
+	e_dbg("After fix-ups FlowControl is now = %x\n",
 		hw->fc.current_mode);
 
 	/* Continue to configure the copper link. */
@@ -3094,7 +3094,7 @@ void e1000e_set_kmrn_lock_loss_workaround_ich8lan(struct e1000_hw *hw,
 	struct e1000_dev_spec_ich8lan *dev_spec = &hw->dev_spec.ich8lan;
 
 	if (hw->mac.type != e1000_ich8lan) {
-		hw_dbg(hw, "Workaround applies to ICH8 only.\n");
+		e_dbg("Workaround applies to ICH8 only.\n");
 		return;
 	}
 
@@ -3372,8 +3372,7 @@ static s32 e1000_get_cfg_done_ich8lan(struct e1000_hw *hw)
 		if (status & E1000_STATUS_PHYRA)
 			ew32(STATUS, status & ~E1000_STATUS_PHYRA);
 		else
-			hw_dbg(hw,
-			       "PHY Reset Asserted not set - needs delay\n");
+			e_dbg("PHY Reset Asserted not set - needs delay\n");
 	}
 
 	e1000e_get_cfg_done(hw);
@@ -3388,7 +3387,7 @@ static s32 e1000_get_cfg_done_ich8lan(struct e1000_hw *hw)
 	} else {
 		if (e1000_valid_nvm_bank_detect_ich8lan(hw, &bank)) {
 			/* Maybe we should do a basic PHY config */
-			hw_dbg(hw, "EEPROM not present\n");
+			e_dbg("EEPROM not present\n");
 			return -E1000_ERR_CONFIG;
 		}
 	}
diff --git a/drivers/net/e1000e/lib.c b/drivers/net/e1000e/lib.c
index 5a670a2230e7..fa31c51e5642 100644
--- a/drivers/net/e1000e/lib.c
+++ b/drivers/net/e1000e/lib.c
@@ -110,12 +110,12 @@ void e1000e_init_rx_addrs(struct e1000_hw *hw, u16 rar_count)
 	u32 i;
 
 	/* Setup the receive address */
-	hw_dbg(hw, "Programming MAC Address into RAR[0]\n");
+	e_dbg("Programming MAC Address into RAR[0]\n");
 
 	e1000e_rar_set(hw, hw->mac.addr, 0);
 
 	/* Zero out the other (rar_entry_count - 1) receive addresses */
-	hw_dbg(hw, "Clearing RAR[1-%u]\n", rar_count-1);
+	e_dbg("Clearing RAR[1-%u]\n", rar_count-1);
 	for (i = 1; i < rar_count; i++) {
 		E1000_WRITE_REG_ARRAY(hw, E1000_RA, (i << 1), 0);
 		e1e_flush();
@@ -271,7 +271,7 @@ void e1000e_update_mc_addr_list_generic(struct e1000_hw *hw,
 	for (; mc_addr_count > 0; mc_addr_count--) {
 		u32 hash_value, hash_reg, hash_bit, mta;
 		hash_value = e1000_hash_mc_addr(hw, mc_addr_list);
-		hw_dbg(hw, "Hash value = 0x%03X\n", hash_value);
+		e_dbg("Hash value = 0x%03X\n", hash_value);
 		hash_reg = (hash_value >> 5) & (hw->mac.mta_reg_count - 1);
 		hash_bit = hash_value & 0x1F;
 		mta = (1 << hash_bit);
@@ -403,7 +403,7 @@ s32 e1000e_check_for_copper_link(struct e1000_hw *hw)
 	 */
 	ret_val = e1000e_config_fc_after_link_up(hw);
 	if (ret_val) {
-		hw_dbg(hw, "Error configuring flow control\n");
+		e_dbg("Error configuring flow control\n");
 	}
 
 	return ret_val;
@@ -443,7 +443,7 @@ s32 e1000e_check_for_fiber_link(struct e1000_hw *hw)
 			mac->autoneg_failed = 1;
 			return 0;
 		}
-		hw_dbg(hw, "NOT RXing /C/, disable AutoNeg and force link.\n");
+		e_dbg("NOT RXing /C/, disable AutoNeg and force link.\n");
 
 		/* Disable auto-negotiation in the TXCW register */
 		ew32(TXCW, (mac->txcw & ~E1000_TXCW_ANE));
@@ -456,7 +456,7 @@ s32 e1000e_check_for_fiber_link(struct e1000_hw *hw)
 		/* Configure Flow Control after forcing link up. */
 		ret_val = e1000e_config_fc_after_link_up(hw);
 		if (ret_val) {
-			hw_dbg(hw, "Error configuring flow control\n");
+			e_dbg("Error configuring flow control\n");
 			return ret_val;
 		}
 	} else if ((ctrl & E1000_CTRL_SLU) && (rxcw & E1000_RXCW_C)) {
@@ -466,7 +466,7 @@ s32 e1000e_check_for_fiber_link(struct e1000_hw *hw)
 		 * and disable forced link in the Device Control register
 		 * in an attempt to auto-negotiate with our link partner.
 		 */
-		hw_dbg(hw, "RXing /C/, enable AutoNeg and stop forcing link.\n");
+		e_dbg("RXing /C/, enable AutoNeg and stop forcing link.\n");
 		ew32(TXCW, mac->txcw);
 		ew32(CTRL, (ctrl & ~E1000_CTRL_SLU));
 
@@ -508,7 +508,7 @@ s32 e1000e_check_for_serdes_link(struct e1000_hw *hw)
 			mac->autoneg_failed = 1;
 			return 0;
 		}
-		hw_dbg(hw, "NOT RXing /C/, disable AutoNeg and force link.\n");
+		e_dbg("NOT RXing /C/, disable AutoNeg and force link.\n");
 
 		/* Disable auto-negotiation in the TXCW register */
 		ew32(TXCW, (mac->txcw & ~E1000_TXCW_ANE));
@@ -521,7 +521,7 @@ s32 e1000e_check_for_serdes_link(struct e1000_hw *hw)
 		/* Configure Flow Control after forcing link up. */
 		ret_val = e1000e_config_fc_after_link_up(hw);
 		if (ret_val) {
-			hw_dbg(hw, "Error configuring flow control\n");
+			e_dbg("Error configuring flow control\n");
 			return ret_val;
 		}
 	} else if ((ctrl & E1000_CTRL_SLU) && (rxcw & E1000_RXCW_C)) {
@@ -531,7 +531,7 @@ s32 e1000e_check_for_serdes_link(struct e1000_hw *hw)
 		 * and disable forced link in the Device Control register
 		 * in an attempt to auto-negotiate with our link partner.
 		 */
-		hw_dbg(hw, "RXing /C/, enable AutoNeg and stop forcing link.\n");
+		e_dbg("RXing /C/, enable AutoNeg and stop forcing link.\n");
 		ew32(TXCW, mac->txcw);
 		ew32(CTRL, (ctrl & ~E1000_CTRL_SLU));
 
@@ -548,11 +548,11 @@ s32 e1000e_check_for_serdes_link(struct e1000_hw *hw)
 		if (rxcw & E1000_RXCW_SYNCH) {
 			if (!(rxcw & E1000_RXCW_IV)) {
 				mac->serdes_has_link = true;
-				hw_dbg(hw, "SERDES: Link up - forced.\n");
+				e_dbg("SERDES: Link up - forced.\n");
 			}
 		} else {
 			mac->serdes_has_link = false;
-			hw_dbg(hw, "SERDES: Link down - force failed.\n");
+			e_dbg("SERDES: Link down - force failed.\n");
 		}
 	}
 
@@ -565,20 +565,20 @@ s32 e1000e_check_for_serdes_link(struct e1000_hw *hw)
 			if (rxcw & E1000_RXCW_SYNCH) {
 				if (!(rxcw & E1000_RXCW_IV)) {
 					mac->serdes_has_link = true;
-					hw_dbg(hw, "SERDES: Link up - autoneg "
+					e_dbg("SERDES: Link up - autoneg "
 					   "completed sucessfully.\n");
 				} else {
 					mac->serdes_has_link = false;
-					hw_dbg(hw, "SERDES: Link down - invalid"
+					e_dbg("SERDES: Link down - invalid"
 					   "codewords detected in autoneg.\n");
 				}
 			} else {
 				mac->serdes_has_link = false;
-				hw_dbg(hw, "SERDES: Link down - no sync.\n");
+				e_dbg("SERDES: Link down - no sync.\n");
 			}
 		} else {
 			mac->serdes_has_link = false;
-			hw_dbg(hw, "SERDES: Link down - autoneg failed\n");
+			e_dbg("SERDES: Link down - autoneg failed\n");
 		}
 	}
 
@@ -609,7 +609,7 @@ static s32 e1000_set_default_fc_generic(struct e1000_hw *hw)
 	ret_val = e1000_read_nvm(hw, NVM_INIT_CONTROL2_REG, 1, &nvm_data);
 
 	if (ret_val) {
-		hw_dbg(hw, "NVM Read Error\n");
+		e_dbg("NVM Read Error\n");
 		return ret_val;
 	}
 
@@ -662,7 +662,7 @@ s32 e1000e_setup_link(struct e1000_hw *hw)
 	 */
 	hw->fc.current_mode = hw->fc.requested_mode;
 
-	hw_dbg(hw, "After fix-ups FlowControl is now = %x\n",
+	e_dbg("After fix-ups FlowControl is now = %x\n",
 		hw->fc.current_mode);
 
 	/* Call the necessary media_type subroutine to configure the link. */
@@ -676,7 +676,7 @@ s32 e1000e_setup_link(struct e1000_hw *hw)
 	 * control is disabled, because it does not hurt anything to
 	 * initialize these registers.
 	 */
-	hw_dbg(hw, "Initializing the Flow Control address, type and timer regs\n");
+	e_dbg("Initializing the Flow Control address, type and timer regs\n");
 	ew32(FCT, FLOW_CONTROL_TYPE);
 	ew32(FCAH, FLOW_CONTROL_ADDRESS_HIGH);
 	ew32(FCAL, FLOW_CONTROL_ADDRESS_LOW);
@@ -746,7 +746,7 @@ static s32 e1000_commit_fc_settings_generic(struct e1000_hw *hw)
 		txcw = (E1000_TXCW_ANE | E1000_TXCW_FD | E1000_TXCW_PAUSE_MASK);
 		break;
 	default:
-		hw_dbg(hw, "Flow control param set incorrectly\n");
+		e_dbg("Flow control param set incorrectly\n");
 		return -E1000_ERR_CONFIG;
 		break;
 	}
@@ -784,7 +784,7 @@ static s32 e1000_poll_fiber_serdes_link_generic(struct e1000_hw *hw)
 			break;
 	}
 	if (i == FIBER_LINK_UP_LIMIT) {
-		hw_dbg(hw, "Never got a valid link from auto-neg!!!\n");
+		e_dbg("Never got a valid link from auto-neg!!!\n");
 		mac->autoneg_failed = 1;
 		/*
 		 * AutoNeg failed to achieve a link, so we'll call
@@ -794,13 +794,13 @@ static s32 e1000_poll_fiber_serdes_link_generic(struct e1000_hw *hw)
 		 */
 		ret_val = mac->ops.check_for_link(hw);
 		if (ret_val) {
-			hw_dbg(hw, "Error while checking for link\n");
+			e_dbg("Error while checking for link\n");
 			return ret_val;
 		}
 		mac->autoneg_failed = 0;
 	} else {
 		mac->autoneg_failed = 0;
-		hw_dbg(hw, "Valid Link Found\n");
+		e_dbg("Valid Link Found\n");
 	}
 
 	return 0;
@@ -836,7 +836,7 @@ s32 e1000e_setup_fiber_serdes_link(struct e1000_hw *hw)
 	 * then the link-up status bit will be set and the flow control enable
 	 * bits (RFCE and TFCE) will be set according to their negotiated value.
 	 */
-	hw_dbg(hw, "Auto-negotiation enabled\n");
+	e_dbg("Auto-negotiation enabled\n");
 
 	ew32(CTRL, ctrl);
 	e1e_flush();
@@ -851,7 +851,7 @@ s32 e1000e_setup_fiber_serdes_link(struct e1000_hw *hw)
 	    (er32(CTRL) & E1000_CTRL_SWDPIN1)) {
 		ret_val = e1000_poll_fiber_serdes_link_generic(hw);
 	} else {
-		hw_dbg(hw, "No signal detected\n");
+		e_dbg("No signal detected\n");
 	}
 
 	return 0;
@@ -947,7 +947,7 @@ s32 e1000e_force_mac_fc(struct e1000_hw *hw)
 	 *      3:  Both Rx and Tx flow control (symmetric) is enabled.
 	 *  other:  No other values should be possible at this point.
 	 */
-	hw_dbg(hw, "hw->fc.current_mode = %u\n", hw->fc.current_mode);
+	e_dbg("hw->fc.current_mode = %u\n", hw->fc.current_mode);
 
 	switch (hw->fc.current_mode) {
 	case e1000_fc_none:
@@ -965,7 +965,7 @@ s32 e1000e_force_mac_fc(struct e1000_hw *hw)
 		ctrl |= (E1000_CTRL_TFCE | E1000_CTRL_RFCE);
 		break;
 	default:
-		hw_dbg(hw, "Flow control param set incorrectly\n");
+		e_dbg("Flow control param set incorrectly\n");
 		return -E1000_ERR_CONFIG;
 	}
 
@@ -1006,7 +1006,7 @@ s32 e1000e_config_fc_after_link_up(struct e1000_hw *hw)
 	}
 
 	if (ret_val) {
-		hw_dbg(hw, "Error forcing flow control settings\n");
+		e_dbg("Error forcing flow control settings\n");
 		return ret_val;
 	}
 
@@ -1030,7 +1030,7 @@ s32 e1000e_config_fc_after_link_up(struct e1000_hw *hw)
 			return ret_val;
 
 		if (!(mii_status_reg & MII_SR_AUTONEG_COMPLETE)) {
-			hw_dbg(hw, "Copper PHY and Auto Neg "
+			e_dbg("Copper PHY and Auto Neg "
 				 "has not completed.\n");
 			return ret_val;
 		}
@@ -1095,10 +1095,10 @@ s32 e1000e_config_fc_after_link_up(struct e1000_hw *hw)
 			 */
 			if (hw->fc.requested_mode == e1000_fc_full) {
 				hw->fc.current_mode = e1000_fc_full;
-				hw_dbg(hw, "Flow Control = FULL.\r\n");
+				e_dbg("Flow Control = FULL.\r\n");
 			} else {
 				hw->fc.current_mode = e1000_fc_rx_pause;
-				hw_dbg(hw, "Flow Control = "
+				e_dbg("Flow Control = "
 					 "RX PAUSE frames only.\r\n");
 			}
 		}
@@ -1116,7 +1116,7 @@ s32 e1000e_config_fc_after_link_up(struct e1000_hw *hw)
 			  (mii_nway_lp_ability_reg & NWAY_LPAR_PAUSE) &&
 			  (mii_nway_lp_ability_reg & NWAY_LPAR_ASM_DIR)) {
 			hw->fc.current_mode = e1000_fc_tx_pause;
-			hw_dbg(hw, "Flow Control = Tx PAUSE frames only.\r\n");
+			e_dbg("Flow Control = Tx PAUSE frames only.\r\n");
 		}
 		/*
 		 * For transmitting PAUSE frames ONLY.
@@ -1132,14 +1132,14 @@ s32 e1000e_config_fc_after_link_up(struct e1000_hw *hw)
 			 !(mii_nway_lp_ability_reg & NWAY_LPAR_PAUSE) &&
 			 (mii_nway_lp_ability_reg & NWAY_LPAR_ASM_DIR)) {
 			hw->fc.current_mode = e1000_fc_rx_pause;
-			hw_dbg(hw, "Flow Control = Rx PAUSE frames only.\r\n");
+			e_dbg("Flow Control = Rx PAUSE frames only.\r\n");
 		} else {
 			/*
 			 * Per the IEEE spec, at this point flow control
 			 * should be disabled.
 			 */
 			hw->fc.current_mode = e1000_fc_none;
-			hw_dbg(hw, "Flow Control = NONE.\r\n");
+			e_dbg("Flow Control = NONE.\r\n");
 		}
 
 		/*
@@ -1149,7 +1149,7 @@ s32 e1000e_config_fc_after_link_up(struct e1000_hw *hw)
 		 */
 		ret_val = mac->ops.get_link_up_info(hw, &speed, &duplex);
 		if (ret_val) {
-			hw_dbg(hw, "Error getting link speed and duplex\n");
+			e_dbg("Error getting link speed and duplex\n");
 			return ret_val;
 		}
 
@@ -1162,7 +1162,7 @@ s32 e1000e_config_fc_after_link_up(struct e1000_hw *hw)
 		 */
 		ret_val = e1000e_force_mac_fc(hw);
 		if (ret_val) {
-			hw_dbg(hw, "Error forcing flow control settings\n");
+			e_dbg("Error forcing flow control settings\n");
 			return ret_val;
 		}
 	}
@@ -1186,21 +1186,21 @@ s32 e1000e_get_speed_and_duplex_copper(struct e1000_hw *hw, u16 *speed, u16 *dup
 	status = er32(STATUS);
 	if (status & E1000_STATUS_SPEED_1000) {
 		*speed = SPEED_1000;
-		hw_dbg(hw, "1000 Mbs, ");
+		e_dbg("1000 Mbs, ");
 	} else if (status & E1000_STATUS_SPEED_100) {
 		*speed = SPEED_100;
-		hw_dbg(hw, "100 Mbs, ");
+		e_dbg("100 Mbs, ");
 	} else {
 		*speed = SPEED_10;
-		hw_dbg(hw, "10 Mbs, ");
+		e_dbg("10 Mbs, ");
 	}
 
 	if (status & E1000_STATUS_FD) {
 		*duplex = FULL_DUPLEX;
-		hw_dbg(hw, "Full Duplex\n");
+		e_dbg("Full Duplex\n");
 	} else {
 		*duplex = HALF_DUPLEX;
-		hw_dbg(hw, "Half Duplex\n");
+		e_dbg("Half Duplex\n");
 	}
 
 	return 0;
@@ -1246,7 +1246,7 @@ s32 e1000e_get_hw_semaphore(struct e1000_hw *hw)
 	}
 
 	if (i == timeout) {
-		hw_dbg(hw, "Driver can't access device - SMBI bit is set.\n");
+		e_dbg("Driver can't access device - SMBI bit is set.\n");
 		return -E1000_ERR_NVM;
 	}
 
@@ -1265,7 +1265,7 @@ s32 e1000e_get_hw_semaphore(struct e1000_hw *hw)
 	if (i == timeout) {
 		/* Release semaphores */
 		e1000e_put_hw_semaphore(hw);
-		hw_dbg(hw, "Driver can't access the NVM\n");
+		e_dbg("Driver can't access the NVM\n");
 		return -E1000_ERR_NVM;
 	}
 
@@ -1305,7 +1305,7 @@ s32 e1000e_get_auto_rd_done(struct e1000_hw *hw)
 	}
 
 	if (i == AUTO_READ_DONE_TIMEOUT) {
-		hw_dbg(hw, "Auto read by HW from NVM has not completed.\n");
+		e_dbg("Auto read by HW from NVM has not completed.\n");
 		return -E1000_ERR_RESET;
 	}
 
@@ -1326,7 +1326,7 @@ s32 e1000e_valid_led_default(struct e1000_hw *hw, u16 *data)
 
 	ret_val = e1000_read_nvm(hw, NVM_ID_LED_SETTINGS, 1, data);
 	if (ret_val) {
-		hw_dbg(hw, "NVM Read Error\n");
+		e_dbg("NVM Read Error\n");
 		return ret_val;
 	}
 
@@ -1580,7 +1580,7 @@ s32 e1000e_disable_pcie_master(struct e1000_hw *hw)
 	}
 
 	if (!timeout) {
-		hw_dbg(hw, "Master requests are pending.\n");
+		e_dbg("Master requests are pending.\n");
 		return -E1000_ERR_MASTER_REQUESTS_PENDING;
 	}
 
@@ -1804,7 +1804,7 @@ s32 e1000e_acquire_nvm(struct e1000_hw *hw)
 	if (!timeout) {
 		eecd &= ~E1000_EECD_REQ;
 		ew32(EECD, eecd);
-		hw_dbg(hw, "Could not acquire NVM grant\n");
+		e_dbg("Could not acquire NVM grant\n");
 		return -E1000_ERR_NVM;
 	}
 
@@ -1909,7 +1909,7 @@ static s32 e1000_ready_nvm_eeprom(struct e1000_hw *hw)
 		}
 
 		if (!timeout) {
-			hw_dbg(hw, "SPI NVM Status error\n");
+			e_dbg("SPI NVM Status error\n");
 			return -E1000_ERR_NVM;
 		}
 	}
@@ -1938,7 +1938,7 @@ s32 e1000e_read_nvm_eerd(struct e1000_hw *hw, u16 offset, u16 words, u16 *data)
 	 */
 	if ((offset >= nvm->word_size) || (words > (nvm->word_size - offset)) ||
 	    (words == 0)) {
-		hw_dbg(hw, "nvm parameter(s) out of bounds\n");
+		e_dbg("nvm parameter(s) out of bounds\n");
 		return -E1000_ERR_NVM;
 	}
 
@@ -1981,7 +1981,7 @@ s32 e1000e_write_nvm_spi(struct e1000_hw *hw, u16 offset, u16 words, u16 *data)
 	 */
 	if ((offset >= nvm->word_size) || (words > (nvm->word_size - offset)) ||
 	    (words == 0)) {
-		hw_dbg(hw, "nvm parameter(s) out of bounds\n");
+		e_dbg("nvm parameter(s) out of bounds\n");
 		return -E1000_ERR_NVM;
 	}
 
@@ -2061,7 +2061,7 @@ s32 e1000e_read_mac_addr(struct e1000_hw *hw)
 		ret_val = e1000_read_nvm(hw, NVM_ALT_MAC_ADDR_PTR, 1,
 					 &mac_addr_offset);
 		if (ret_val) {
-			hw_dbg(hw, "NVM Read Error\n");
+			e_dbg("NVM Read Error\n");
 			return ret_val;
 		}
 		if (mac_addr_offset == 0xFFFF)
@@ -2076,7 +2076,7 @@ s32 e1000e_read_mac_addr(struct e1000_hw *hw)
 			ret_val = e1000_read_nvm(hw, mac_addr_offset, 1,
 						 &nvm_data);
 			if (ret_val) {
-				hw_dbg(hw, "NVM Read Error\n");
+				e_dbg("NVM Read Error\n");
 				return ret_val;
 			}
 			if (nvm_data & 0x0001)
@@ -2091,7 +2091,7 @@ s32 e1000e_read_mac_addr(struct e1000_hw *hw)
 		offset = mac_addr_offset + (i >> 1);
 		ret_val = e1000_read_nvm(hw, offset, 1, &nvm_data);
 		if (ret_val) {
-			hw_dbg(hw, "NVM Read Error\n");
+			e_dbg("NVM Read Error\n");
 			return ret_val;
 		}
 		hw->mac.perm_addr[i] = (u8)(nvm_data & 0xFF);
@@ -2124,14 +2124,14 @@ s32 e1000e_validate_nvm_checksum_generic(struct e1000_hw *hw)
 	for (i = 0; i < (NVM_CHECKSUM_REG + 1); i++) {
 		ret_val = e1000_read_nvm(hw, i, 1, &nvm_data);
 		if (ret_val) {
-			hw_dbg(hw, "NVM Read Error\n");
+			e_dbg("NVM Read Error\n");
 			return ret_val;
 		}
 		checksum += nvm_data;
 	}
 
 	if (checksum != (u16) NVM_SUM) {
-		hw_dbg(hw, "NVM Checksum Invalid\n");
+		e_dbg("NVM Checksum Invalid\n");
 		return -E1000_ERR_NVM;
 	}
 
@@ -2155,7 +2155,7 @@ s32 e1000e_update_nvm_checksum_generic(struct e1000_hw *hw)
 	for (i = 0; i < NVM_CHECKSUM_REG; i++) {
 		ret_val = e1000_read_nvm(hw, i, 1, &nvm_data);
 		if (ret_val) {
-			hw_dbg(hw, "NVM Read Error while updating checksum.\n");
+			e_dbg("NVM Read Error while updating checksum.\n");
 			return ret_val;
 		}
 		checksum += nvm_data;
@@ -2163,7 +2163,7 @@ s32 e1000e_update_nvm_checksum_generic(struct e1000_hw *hw)
 	checksum = (u16) NVM_SUM - checksum;
 	ret_val = e1000_write_nvm(hw, NVM_CHECKSUM_REG, 1, &checksum);
 	if (ret_val)
-		hw_dbg(hw, "NVM Write Error while updating checksum.\n");
+		e_dbg("NVM Write Error while updating checksum.\n");
 
 	return ret_val;
 }
@@ -2226,7 +2226,7 @@ static s32 e1000_mng_enable_host_if(struct e1000_hw *hw)
 	/* Check that the host interface is enabled. */
 	hicr = er32(HICR);
 	if ((hicr & E1000_HICR_EN) == 0) {
-		hw_dbg(hw, "E1000_HOST_EN bit disabled.\n");
+		e_dbg("E1000_HOST_EN bit disabled.\n");
 		return -E1000_ERR_HOST_INTERFACE_COMMAND;
 	}
 	/* check the previous command is completed */
@@ -2238,7 +2238,7 @@ static s32 e1000_mng_enable_host_if(struct e1000_hw *hw)
 	}
 
 	if (i == E1000_MNG_DHCP_COMMAND_TIMEOUT) {
-		hw_dbg(hw, "Previous command timeout failed .\n");
+		e_dbg("Previous command timeout failed .\n");
 		return -E1000_ERR_HOST_INTERFACE_COMMAND;
 	}
 
@@ -2509,14 +2509,14 @@ s32 e1000e_read_pba_num(struct e1000_hw *hw, u32 *pba_num)
 
 	ret_val = e1000_read_nvm(hw, NVM_PBA_OFFSET_0, 1, &nvm_data);
 	if (ret_val) {
-		hw_dbg(hw, "NVM Read Error\n");
+		e_dbg("NVM Read Error\n");
 		return ret_val;
 	}
 	*pba_num = (u32)(nvm_data << 16);
 
 	ret_val = e1000_read_nvm(hw, NVM_PBA_OFFSET_1, 1, &nvm_data);
 	if (ret_val) {
-		hw_dbg(hw, "NVM Read Error\n");
+		e_dbg("NVM Read Error\n");
 		return ret_val;
 	}
 	*pba_num |= nvm_data;
diff --git a/drivers/net/e1000e/netdev.c b/drivers/net/e1000e/netdev.c
index ff9f9f1725e3..0b5352307f16 100644
--- a/drivers/net/e1000e/netdev.c
+++ b/drivers/net/e1000e/netdev.c
@@ -65,17 +65,6 @@ static const struct e1000_info *e1000_info_tbl[] = {
 	[board_pchlan]		= &e1000_pch_info,
 };
 
-#ifdef DEBUG
-/**
- * e1000_get_hw_dev_name - return device name string
- * used by hardware layer to print debugging information
- **/
-char *e1000e_get_hw_dev_name(struct e1000_hw *hw)
-{
-	return hw->adapter->netdev->name;
-}
-#endif
-
 /**
  * e1000_desc_unused - calculate if we have unused descriptors
  **/
@@ -415,6 +404,7 @@ static bool e1000_clean_rx_irq(struct e1000_adapter *adapter,
 {
 	struct net_device *netdev = adapter->netdev;
 	struct pci_dev *pdev = adapter->pdev;
+	struct e1000_hw *hw = &adapter->hw;
 	struct e1000_ring *rx_ring = adapter->rx_ring;
 	struct e1000_rx_desc *rx_desc, *next_rxd;
 	struct e1000_buffer *buffer_info, *next_buffer;
@@ -464,8 +454,7 @@ static bool e1000_clean_rx_irq(struct e1000_adapter *adapter,
 		 * packet, also make sure the frame isn't just CRC only */
 		if (!(status & E1000_RXD_STAT_EOP) || (length <= 4)) {
 			/* All receives must fit into a single buffer */
-			e_dbg("%s: Receive packet consumed multiple buffers\n",
-			      netdev->name);
+			e_dbg("Receive packet consumed multiple buffers\n");
 			/* recycle */
 			buffer_info->skb = skb;
 			goto next_desc;
@@ -682,6 +671,7 @@ static bool e1000_clean_tx_irq(struct e1000_adapter *adapter)
 static bool e1000_clean_rx_irq_ps(struct e1000_adapter *adapter,
 				  int *work_done, int work_to_do)
 {
+	struct e1000_hw *hw = &adapter->hw;
 	union e1000_rx_desc_packet_split *rx_desc, *next_rxd;
 	struct net_device *netdev = adapter->netdev;
 	struct pci_dev *pdev = adapter->pdev;
@@ -725,8 +715,8 @@ static bool e1000_clean_rx_irq_ps(struct e1000_adapter *adapter,
 		buffer_info->dma = 0;
 
 		if (!(staterr & E1000_RXD_STAT_EOP)) {
-			e_dbg("%s: Packet Split buffers didn't pick up the "
-			      "full packet\n", netdev->name);
+			e_dbg("Packet Split buffers didn't pick up the full "
+			      "packet\n");
 			dev_kfree_skb_irq(skb);
 			goto next_desc;
 		}
@@ -739,8 +729,8 @@ static bool e1000_clean_rx_irq_ps(struct e1000_adapter *adapter,
 		length = le16_to_cpu(rx_desc->wb.middle.length0);
 
 		if (!length) {
-			e_dbg("%s: Last part of the packet spanning multiple "
-			      "descriptors\n", netdev->name);
+			e_dbg("Last part of the packet spanning multiple "
+			      "descriptors\n");
 			dev_kfree_skb_irq(skb);
 			goto next_desc;
 		}
@@ -2931,7 +2921,7 @@ static irqreturn_t e1000_intr_msi_test(int irq, void *data)
 	struct e1000_hw *hw = &adapter->hw;
 	u32 icr = er32(ICR);
 
-	e_dbg("%s: icr is %08X\n", netdev->name, icr);
+	e_dbg("icr is %08X\n", icr);
 	if (icr & E1000_ICR_RXSEQ) {
 		adapter->flags &= ~FLAG_MSI_TEST_FAILED;
 		wmb();
@@ -3001,7 +2991,7 @@ static int e1000_test_msi_interrupt(struct e1000_adapter *adapter)
 		goto msi_test_failed;
 
 	/* okay so the test worked, restore settings */
-	e_dbg("%s: MSI interrupt test succeeded!\n", netdev->name);
+	e_dbg("MSI interrupt test succeeded!\n");
 msi_test_failed:
 	e1000e_set_interrupt_capability(adapter);
 	e1000_request_irq(adapter);
diff --git a/drivers/net/e1000e/phy.c b/drivers/net/e1000e/phy.c
index 95a8196cf44c..cff1df204031 100644
--- a/drivers/net/e1000e/phy.c
+++ b/drivers/net/e1000e/phy.c
@@ -212,7 +212,7 @@ s32 e1000e_read_phy_reg_mdic(struct e1000_hw *hw, u32 offset, u16 *data)
 	u32 i, mdic = 0;
 
 	if (offset > MAX_PHY_REG_ADDRESS) {
-		hw_dbg(hw, "PHY Address %d is out of range\n", offset);
+		e_dbg("PHY Address %d is out of range\n", offset);
 		return -E1000_ERR_PARAM;
 	}
 
@@ -239,11 +239,11 @@ s32 e1000e_read_phy_reg_mdic(struct e1000_hw *hw, u32 offset, u16 *data)
 			break;
 	}
 	if (!(mdic & E1000_MDIC_READY)) {
-		hw_dbg(hw, "MDI Read did not complete\n");
+		e_dbg("MDI Read did not complete\n");
 		return -E1000_ERR_PHY;
 	}
 	if (mdic & E1000_MDIC_ERROR) {
-		hw_dbg(hw, "MDI Error\n");
+		e_dbg("MDI Error\n");
 		return -E1000_ERR_PHY;
 	}
 	*data = (u16) mdic;
@@ -265,7 +265,7 @@ s32 e1000e_write_phy_reg_mdic(struct e1000_hw *hw, u32 offset, u16 data)
 	u32 i, mdic = 0;
 
 	if (offset > MAX_PHY_REG_ADDRESS) {
-		hw_dbg(hw, "PHY Address %d is out of range\n", offset);
+		e_dbg("PHY Address %d is out of range\n", offset);
 		return -E1000_ERR_PARAM;
 	}
 
@@ -293,11 +293,11 @@ s32 e1000e_write_phy_reg_mdic(struct e1000_hw *hw, u32 offset, u16 data)
 			break;
 	}
 	if (!(mdic & E1000_MDIC_READY)) {
-		hw_dbg(hw, "MDI Write did not complete\n");
+		e_dbg("MDI Write did not complete\n");
 		return -E1000_ERR_PHY;
 	}
 	if (mdic & E1000_MDIC_ERROR) {
-		hw_dbg(hw, "MDI Error\n");
+		e_dbg("MDI Error\n");
 		return -E1000_ERR_PHY;
 	}
 
@@ -786,7 +786,7 @@ s32 e1000e_copper_link_setup_m88(struct e1000_hw *hw)
 	/* Commit the changes. */
 	ret_val = e1000e_commit_phy(hw);
 	if (ret_val) {
-		hw_dbg(hw, "Error committing the PHY changes\n");
+		e_dbg("Error committing the PHY changes\n");
 		return ret_val;
 	}
 
@@ -823,7 +823,7 @@ s32 e1000e_copper_link_setup_igp(struct e1000_hw *hw)
 
 	ret_val = e1000_phy_hw_reset(hw);
 	if (ret_val) {
-		hw_dbg(hw, "Error resetting the PHY.\n");
+		e_dbg("Error resetting the PHY.\n");
 		return ret_val;
 	}
 
@@ -836,7 +836,7 @@ s32 e1000e_copper_link_setup_igp(struct e1000_hw *hw)
 	/* disable lplu d0 during driver init */
 	ret_val = e1000_set_d0_lplu_state(hw, 0);
 	if (ret_val) {
-		hw_dbg(hw, "Error Disabling LPLU D0\n");
+		e_dbg("Error Disabling LPLU D0\n");
 		return ret_val;
 	}
 	/* Configure mdi-mdix settings */
@@ -972,39 +972,39 @@ static s32 e1000_phy_setup_autoneg(struct e1000_hw *hw)
 				 NWAY_AR_10T_HD_CAPS);
 	mii_1000t_ctrl_reg &= ~(CR_1000T_HD_CAPS | CR_1000T_FD_CAPS);
 
-	hw_dbg(hw, "autoneg_advertised %x\n", phy->autoneg_advertised);
+	e_dbg("autoneg_advertised %x\n", phy->autoneg_advertised);
 
 	/* Do we want to advertise 10 Mb Half Duplex? */
 	if (phy->autoneg_advertised & ADVERTISE_10_HALF) {
-		hw_dbg(hw, "Advertise 10mb Half duplex\n");
+		e_dbg("Advertise 10mb Half duplex\n");
 		mii_autoneg_adv_reg |= NWAY_AR_10T_HD_CAPS;
 	}
 
 	/* Do we want to advertise 10 Mb Full Duplex? */
 	if (phy->autoneg_advertised & ADVERTISE_10_FULL) {
-		hw_dbg(hw, "Advertise 10mb Full duplex\n");
+		e_dbg("Advertise 10mb Full duplex\n");
 		mii_autoneg_adv_reg |= NWAY_AR_10T_FD_CAPS;
 	}
 
 	/* Do we want to advertise 100 Mb Half Duplex? */
 	if (phy->autoneg_advertised & ADVERTISE_100_HALF) {
-		hw_dbg(hw, "Advertise 100mb Half duplex\n");
+		e_dbg("Advertise 100mb Half duplex\n");
 		mii_autoneg_adv_reg |= NWAY_AR_100TX_HD_CAPS;
 	}
 
 	/* Do we want to advertise 100 Mb Full Duplex? */
 	if (phy->autoneg_advertised & ADVERTISE_100_FULL) {
-		hw_dbg(hw, "Advertise 100mb Full duplex\n");
+		e_dbg("Advertise 100mb Full duplex\n");
 		mii_autoneg_adv_reg |= NWAY_AR_100TX_FD_CAPS;
 	}
 
 	/* We do not allow the Phy to advertise 1000 Mb Half Duplex */
 	if (phy->autoneg_advertised & ADVERTISE_1000_HALF)
-		hw_dbg(hw, "Advertise 1000mb Half duplex request denied!\n");
+		e_dbg("Advertise 1000mb Half duplex request denied!\n");
 
 	/* Do we want to advertise 1000 Mb Full Duplex? */
 	if (phy->autoneg_advertised & ADVERTISE_1000_FULL) {
-		hw_dbg(hw, "Advertise 1000mb Full duplex\n");
+		e_dbg("Advertise 1000mb Full duplex\n");
 		mii_1000t_ctrl_reg |= CR_1000T_FD_CAPS;
 	}
 
@@ -1063,7 +1063,7 @@ static s32 e1000_phy_setup_autoneg(struct e1000_hw *hw)
 		mii_autoneg_adv_reg |= (NWAY_AR_ASM_DIR | NWAY_AR_PAUSE);
 		break;
 	default:
-		hw_dbg(hw, "Flow control param set incorrectly\n");
+		e_dbg("Flow control param set incorrectly\n");
 		ret_val = -E1000_ERR_CONFIG;
 		return ret_val;
 	}
@@ -1072,7 +1072,7 @@ static s32 e1000_phy_setup_autoneg(struct e1000_hw *hw)
 	if (ret_val)
 		return ret_val;
 
-	hw_dbg(hw, "Auto-Neg Advertising %x\n", mii_autoneg_adv_reg);
+	e_dbg("Auto-Neg Advertising %x\n", mii_autoneg_adv_reg);
 
 	if (phy->autoneg_mask & ADVERTISE_1000_FULL) {
 		ret_val = e1e_wphy(hw, PHY_1000T_CTRL, mii_1000t_ctrl_reg);
@@ -1109,13 +1109,13 @@ static s32 e1000_copper_link_autoneg(struct e1000_hw *hw)
 	if (phy->autoneg_advertised == 0)
 		phy->autoneg_advertised = phy->autoneg_mask;
 
-	hw_dbg(hw, "Reconfiguring auto-neg advertisement params\n");
+	e_dbg("Reconfiguring auto-neg advertisement params\n");
 	ret_val = e1000_phy_setup_autoneg(hw);
 	if (ret_val) {
-		hw_dbg(hw, "Error Setting up Auto-Negotiation\n");
+		e_dbg("Error Setting up Auto-Negotiation\n");
 		return ret_val;
 	}
-	hw_dbg(hw, "Restarting Auto-Neg\n");
+	e_dbg("Restarting Auto-Neg\n");
 
 	/*
 	 * Restart auto-negotiation by setting the Auto Neg Enable bit and
@@ -1137,7 +1137,7 @@ static s32 e1000_copper_link_autoneg(struct e1000_hw *hw)
 	if (phy->autoneg_wait_to_complete) {
 		ret_val = e1000_wait_autoneg(hw);
 		if (ret_val) {
-			hw_dbg(hw, "Error while waiting for "
+			e_dbg("Error while waiting for "
 				 "autoneg to complete\n");
 			return ret_val;
 		}
@@ -1175,10 +1175,10 @@ s32 e1000e_setup_copper_link(struct e1000_hw *hw)
 		 * PHY will be set to 10H, 10F, 100H or 100F
 		 * depending on user settings.
 		 */
-		hw_dbg(hw, "Forcing Speed and Duplex\n");
+		e_dbg("Forcing Speed and Duplex\n");
 		ret_val = e1000_phy_force_speed_duplex(hw);
 		if (ret_val) {
-			hw_dbg(hw, "Error Forcing Speed and Duplex\n");
+			e_dbg("Error Forcing Speed and Duplex\n");
 			return ret_val;
 		}
 	}
@@ -1195,11 +1195,11 @@ s32 e1000e_setup_copper_link(struct e1000_hw *hw)
 		return ret_val;
 
 	if (link) {
-		hw_dbg(hw, "Valid link established!!!\n");
+		e_dbg("Valid link established!!!\n");
 		e1000e_config_collision_dist(hw);
 		ret_val = e1000e_config_fc_after_link_up(hw);
 	} else {
-		hw_dbg(hw, "Unable to establish link!!!\n");
+		e_dbg("Unable to establish link!!!\n");
 	}
 
 	return ret_val;
@@ -1245,12 +1245,12 @@ s32 e1000e_phy_force_speed_duplex_igp(struct e1000_hw *hw)
 	if (ret_val)
 		return ret_val;
 
-	hw_dbg(hw, "IGP PSCR: %X\n", phy_data);
+	e_dbg("IGP PSCR: %X\n", phy_data);
 
 	udelay(1);
 
 	if (phy->autoneg_wait_to_complete) {
-		hw_dbg(hw, "Waiting for forced speed/duplex link on IGP phy.\n");
+		e_dbg("Waiting for forced speed/duplex link on IGP phy.\n");
 
 		ret_val = e1000e_phy_has_link_generic(hw,
 						     PHY_FORCE_LIMIT,
@@ -1260,7 +1260,7 @@ s32 e1000e_phy_force_speed_duplex_igp(struct e1000_hw *hw)
 			return ret_val;
 
 		if (!link)
-			hw_dbg(hw, "Link taking longer than expected.\n");
+			e_dbg("Link taking longer than expected.\n");
 
 		/* Try once more */
 		ret_val = e1000e_phy_has_link_generic(hw,
@@ -1304,7 +1304,7 @@ s32 e1000e_phy_force_speed_duplex_m88(struct e1000_hw *hw)
 	if (ret_val)
 		return ret_val;
 
-	hw_dbg(hw, "M88E1000 PSCR: %X\n", phy_data);
+	e_dbg("M88E1000 PSCR: %X\n", phy_data);
 
 	ret_val = e1e_rphy(hw, PHY_CONTROL, &phy_data);
 	if (ret_val)
@@ -1322,7 +1322,7 @@ s32 e1000e_phy_force_speed_duplex_m88(struct e1000_hw *hw)
 		return ret_val;
 
 	if (phy->autoneg_wait_to_complete) {
-		hw_dbg(hw, "Waiting for forced speed/duplex link on M88 phy.\n");
+		e_dbg("Waiting for forced speed/duplex link on M88 phy.\n");
 
 		ret_val = e1000e_phy_has_link_generic(hw, PHY_FORCE_LIMIT,
 						     100000, &link);
@@ -1413,11 +1413,11 @@ void e1000e_phy_force_speed_duplex_setup(struct e1000_hw *hw, u16 *phy_ctrl)
 	if (mac->forced_speed_duplex & E1000_ALL_HALF_DUPLEX) {
 		ctrl &= ~E1000_CTRL_FD;
 		*phy_ctrl &= ~MII_CR_FULL_DUPLEX;
-		hw_dbg(hw, "Half Duplex\n");
+		e_dbg("Half Duplex\n");
 	} else {
 		ctrl |= E1000_CTRL_FD;
 		*phy_ctrl |= MII_CR_FULL_DUPLEX;
-		hw_dbg(hw, "Full Duplex\n");
+		e_dbg("Full Duplex\n");
 	}
 
 	/* Forcing 10mb or 100mb? */
@@ -1425,12 +1425,12 @@ void e1000e_phy_force_speed_duplex_setup(struct e1000_hw *hw, u16 *phy_ctrl)
 		ctrl |= E1000_CTRL_SPD_100;
 		*phy_ctrl |= MII_CR_SPEED_100;
 		*phy_ctrl &= ~(MII_CR_SPEED_1000 | MII_CR_SPEED_10);
-		hw_dbg(hw, "Forcing 100mb\n");
+		e_dbg("Forcing 100mb\n");
 	} else {
 		ctrl &= ~(E1000_CTRL_SPD_1000 | E1000_CTRL_SPD_100);
 		*phy_ctrl |= MII_CR_SPEED_10;
 		*phy_ctrl &= ~(MII_CR_SPEED_1000 | MII_CR_SPEED_100);
-		hw_dbg(hw, "Forcing 10mb\n");
+		e_dbg("Forcing 10mb\n");
 	}
 
 	e1000e_config_collision_dist(hw);
@@ -1826,7 +1826,7 @@ s32 e1000e_get_phy_info_m88(struct e1000_hw *hw)
 	bool link;
 
 	if (hw->phy.media_type != e1000_media_type_copper) {
-		hw_dbg(hw, "Phy info is only valid for copper media\n");
+		e_dbg("Phy info is only valid for copper media\n");
 		return -E1000_ERR_CONFIG;
 	}
 
@@ -1835,7 +1835,7 @@ s32 e1000e_get_phy_info_m88(struct e1000_hw *hw)
 		return ret_val;
 
 	if (!link) {
-		hw_dbg(hw, "Phy info is only valid if link is up\n");
+		e_dbg("Phy info is only valid if link is up\n");
 		return -E1000_ERR_CONFIG;
 	}
 
@@ -1903,7 +1903,7 @@ s32 e1000e_get_phy_info_igp(struct e1000_hw *hw)
 		return ret_val;
 
 	if (!link) {
-		hw_dbg(hw, "Phy info is only valid if link is up\n");
+		e_dbg("Phy info is only valid if link is up\n");
 		return -E1000_ERR_CONFIG;
 	}
 
@@ -2031,7 +2031,7 @@ s32 e1000e_get_cfg_done(struct e1000_hw *hw)
  **/
 s32 e1000e_phy_init_script_igp3(struct e1000_hw *hw)
 {
-	hw_dbg(hw, "Running IGP 3 PHY init script\n");
+	e_dbg("Running IGP 3 PHY init script\n");
 
 	/* PHY init IGP 3 */
 	/* Enable rise/fall, 10-mode work in class-A */
@@ -2474,7 +2474,7 @@ static s32 e1000_access_phy_wakeup_reg_bm(struct e1000_hw *hw, u32 offset,
 	/* Gig must be disabled for MDIO accesses to page 800 */
 	if ((hw->mac.type == e1000_pchlan) &&
 	   (!(er32(PHY_CTRL) & E1000_PHY_CTRL_GBE_DISABLE)))
-		hw_dbg(hw, "Attempting to access page 800 while gig enabled\n");
+		e_dbg("Attempting to access page 800 while gig enabled\n");
 
 	/* All operations in this function are phy address 1 */
 	hw->phy.addr = 1;
@@ -2884,7 +2884,7 @@ static s32 e1000_access_phy_debug_regs_hv(struct e1000_hw *hw, u32 offset,
 	/* masking with 0x3F to remove the page from offset */
 	ret_val = e1000e_write_phy_reg_mdic(hw, addr_reg, (u16)offset & 0x3F);
 	if (ret_val) {
-		hw_dbg(hw, "Could not write PHY the HV address register\n");
+		e_dbg("Could not write PHY the HV address register\n");
 		goto out;
 	}
 
@@ -2895,7 +2895,7 @@ static s32 e1000_access_phy_debug_regs_hv(struct e1000_hw *hw, u32 offset,
 		ret_val = e1000e_write_phy_reg_mdic(hw, data_reg, *data);
 
 	if (ret_val) {
-		hw_dbg(hw, "Could not read data value from HV data register\n");
+		e_dbg("Could not read data value from HV data register\n");
 		goto out;
 	}
 
@@ -3021,12 +3021,12 @@ s32 e1000_phy_force_speed_duplex_82577(struct e1000_hw *hw)
 	if (ret_val)
 		goto out;
 
-	hw_dbg(hw, "I82577_PHY_CTRL_2: %X\n", phy_data);
+	e_dbg("I82577_PHY_CTRL_2: %X\n", phy_data);
 
 	udelay(1);
 
 	if (phy->autoneg_wait_to_complete) {
-		hw_dbg(hw, "Waiting for forced speed/duplex link on 82577 phy\n");
+		e_dbg("Waiting for forced speed/duplex link on 82577 phy\n");
 
 		ret_val = e1000e_phy_has_link_generic(hw,
 		                                     PHY_FORCE_LIMIT,
@@ -3036,7 +3036,7 @@ s32 e1000_phy_force_speed_duplex_82577(struct e1000_hw *hw)
 			goto out;
 
 		if (!link)
-			hw_dbg(hw, "Link taking longer than expected.\n");
+			e_dbg("Link taking longer than expected.\n");
 
 		/* Try once more */
 		ret_val = e1000e_phy_has_link_generic(hw,
@@ -3072,7 +3072,7 @@ s32 e1000_get_phy_info_82577(struct e1000_hw *hw)
 		goto out;
 
 	if (!link) {
-		hw_dbg(hw, "Phy info is only valid if link is up\n");
+		e_dbg("Phy info is only valid if link is up\n");
 		ret_val = -E1000_ERR_CONFIG;
 		goto out;
 	}