iio: mma8452: add support for MMA8453Q accelerometer chip

This adds support for the 10 bit version if Freescale's accelerometers
of this series. The datasheet is available at Freescale's website:

http://cache.freescale.com/files/sensors/doc/data_sheet/MMA8453Q.pdf

It creates a devicetree bindings file to document the new functionality
and removes the driver from the trivial-devices list.

Signed-off-by: Martin Kepplinger <martin.kepplinger@theobroma-systems.com>
Signed-off-by: Christoph Muellner <christoph.muellner@theobroma-systems.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>

4 files changed, 59 insertions, 7 deletions

diff --git a/Documentation/devicetree/bindings/i2c/trivial-devices.txt b/Documentation/devicetree/bindings/i2c/trivial-devices.txt
index af1bc50ecfb1..e1c07dd8792d 100644
--- a/Documentation/devicetree/bindings/i2c/trivial-devices.txt
+++ b/Documentation/devicetree/bindings/i2c/trivial-devices.txt
@@ -54,7 +54,6 @@ epson,rx8581		I2C-BUS INTERFACE REAL TIME CLOCK MODULE
 fsl,mag3110		MAG3110: Xtrinsic High Accuracy, 3D Magnetometer
 fsl,mc13892		MC13892: Power Management Integrated Circuit (PMIC) for i.MX35/51
 fsl,mma8450		MMA8450Q: Xtrinsic Low-power, 3-axis Xtrinsic Accelerometer
-fsl,mma8452		MMA8452Q: 3-axis 12-bit / 8-bit Digital Accelerometer
 fsl,mpr121		MPR121: Proximity Capacitive Touch Sensor Controller
 fsl,sgtl5000		SGTL5000: Ultra Low-Power Audio Codec
 gmt,g751		G751: Digital Temperature Sensor and Thermal Watchdog with Two-Wire Interface
diff --git a/Documentation/devicetree/bindings/iio/accel/mma8452.txt b/Documentation/devicetree/bindings/iio/accel/mma8452.txt
new file mode 100644
index 000000000000..c3bc272e2030
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/accel/mma8452.txt
@@ -0,0 +1,22 @@
+Freescale MMA8452Q or MMA8453Q triaxial accelerometer
+
+Required properties:
+
+  - compatible: should contain one of
+    * "fsl,mma8452"
+    * "fsl,mma8453"
+  - reg: the I2C address of the chip
+
+Optional properties:
+
+  - interrupt-parent: should be the phandle for the interrupt controller
+  - interrupts: interrupt mapping for GPIO IRQ
+
+Example:
+
+	mma8453fc@1d {
+		compatible = "fsl,mma8453";
+		reg = <0x1d>;
+		interrupt-parent = <&gpio1>;
+		interrupts = <5 0>;
+	};
diff --git a/drivers/iio/accel/Kconfig b/drivers/iio/accel/Kconfig
index cd5cd246792d..fc53c29f060e 100644
--- a/drivers/iio/accel/Kconfig
+++ b/drivers/iio/accel/Kconfig
@@ -100,13 +100,13 @@ config KXCJK1013
 	  be called kxcjk-1013.
 
 config MMA8452
-	tristate "Freescale MMA8452Q Accelerometer Driver"
+	tristate "Freescale MMA8452Q and similar Accelerometers Driver"
 	depends on I2C
 	select IIO_BUFFER
 	select IIO_TRIGGERED_BUFFER
 	help
-	  Say yes here to build support for the Freescale MMA8452Q 3-axis
-	  accelerometer.
+	  Say yes here to build support for the following Freescale 3-axis
+	  accelerometers: MMA8452Q, MMA8453Q.
 
 	  To compile this driver as a module, choose M here: the module
 	  will be called mma8452.
diff --git a/drivers/iio/accel/mma8452.c b/drivers/iio/accel/mma8452.c
index f28428faaf14..7b2ab17dfe84 100644
--- a/drivers/iio/accel/mma8452.c
+++ b/drivers/iio/accel/mma8452.c
@@ -1,5 +1,8 @@
 /*
- * mma8452.c - Support for Freescale MMA8452Q 3-axis 12-bit accelerometer
+ * mma8452.c - Support for following Freescale 3-axis accelerometers:
+ *
+ * MMA8452Q (12 bit)
+ * MMA8453Q (10 bit)
  *
  * Copyright 2014 Peter Meerwald <pmeerw@pmeerw.net>
  *
@@ -26,7 +29,7 @@
 
 #define MMA8452_STATUS				0x00
 #define  MMA8452_STATUS_DRDY			(BIT(2) | BIT(1) | BIT(0))
-#define MMA8452_OUT_X				0x01 /* MSB first, 12-bit  */
+#define MMA8452_OUT_X				0x01 /* MSB first */
 #define MMA8452_OUT_Y				0x03
 #define MMA8452_OUT_Z				0x05
 #define MMA8452_INT_SRC				0x0c
@@ -69,6 +72,7 @@
 #define  MMA8452_INT_TRANS			BIT(5)
 
 #define  MMA8452_DEVICE_ID			0x2a
+#define  MMA8453_DEVICE_ID			0x3a
 
 struct mma8452_data {
 	struct i2c_client *client;
@@ -768,8 +772,16 @@ static const struct iio_chan_spec mma8452_channels[] = {
 	IIO_CHAN_SOFT_TIMESTAMP(3),
 };
 
+static const struct iio_chan_spec mma8453_channels[] = {
+	MMA8452_CHANNEL(X, 0, 10),
+	MMA8452_CHANNEL(Y, 1, 10),
+	MMA8452_CHANNEL(Z, 2, 10),
+	IIO_CHAN_SOFT_TIMESTAMP(3),
+};
+
 enum {
 	mma8452,
+	mma8453,
 };
 
 static const struct mma_chip_info mma_chip_info_table[] = {
@@ -796,6 +808,22 @@ static const struct mma_chip_info mma_chip_info_table[] = {
 		.ev_ths_mask = MMA8452_TRANSIENT_THS_MASK,
 		.ev_count = MMA8452_TRANSIENT_COUNT,
 	},
+	[mma8453] = {
+		.chip_id = MMA8453_DEVICE_ID,
+		.channels = mma8453_channels,
+		.num_channels = ARRAY_SIZE(mma8453_channels),
+		.mma_scales = { {0, 38307}, {0, 76614}, {0, 153228} },
+		.ev_cfg = MMA8452_TRANSIENT_CFG,
+		.ev_cfg_ele = MMA8452_TRANSIENT_CFG_ELE,
+		.ev_cfg_chan_shift = 1,
+		.ev_src = MMA8452_TRANSIENT_SRC,
+		.ev_src_xe = MMA8452_TRANSIENT_SRC_XTRANSE,
+		.ev_src_ye = MMA8452_TRANSIENT_SRC_YTRANSE,
+		.ev_src_ze = MMA8452_TRANSIENT_SRC_ZTRANSE,
+		.ev_ths = MMA8452_TRANSIENT_THS,
+		.ev_ths_mask = MMA8452_TRANSIENT_THS_MASK,
+		.ev_count = MMA8452_TRANSIENT_COUNT,
+	},
 };
 
 static struct attribute *mma8452_attributes[] = {
@@ -917,6 +945,7 @@ static int mma8452_reset(struct i2c_client *client)
 
 static const struct of_device_id mma8452_dt_ids[] = {
 	{ .compatible = "fsl,mma8452", .data = &mma_chip_info_table[mma8452] },
+	{ .compatible = "fsl,mma8453", .data = &mma_chip_info_table[mma8453] },
 	{ }
 };
 MODULE_DEVICE_TABLE(of, mma8452_dt_ids);
@@ -932,7 +961,8 @@ static int mma8452_probe(struct i2c_client *client,
 	ret = i2c_smbus_read_byte_data(client, MMA8452_WHO_AM_I);
 	if (ret < 0)
 		return ret;
-	if (ret != MMA8452_DEVICE_ID)
+
+	if (ret != MMA8452_DEVICE_ID && ret != MMA8453_DEVICE_ID)
 		return -ENODEV;
 
 	match = of_match_device(mma8452_dt_ids, &client->dev);
@@ -1079,6 +1109,7 @@ static SIMPLE_DEV_PM_OPS(mma8452_pm_ops, mma8452_suspend, mma8452_resume);
 
 static const struct i2c_device_id mma8452_id[] = {
 	{ "mma8452", mma8452 },
+	{ "mma8453", mma8453 },
 	{ }
 };
 MODULE_DEVICE_TABLE(i2c, mma8452_id);