diff options
| author | Linus Torvalds <torvalds@linux-foundation.org> | 2017-05-11 05:13:03 +0300 |
|---|---|---|
| committer | Linus Torvalds <torvalds@linux-foundation.org> | 2017-05-11 05:13:03 +0300 |
| commit | 291b38a7565b41676cafd1b4052315a94d9c8977 (patch) | |
| tree | 876251a73901865110c8d0d048cf379b8a6ff0e4 | |
| parent | b5a53b61a2890ec08f404f524c1c42aa86f09be4 (diff) | |
| parent | 6192c41fc608b0a58d5540b015aa1672c266f3c5 (diff) | |
| download | linux-291b38a7565b41676cafd1b4052315a94d9c8977.tar.xz | |
Merge tag 'hwparam-20170420' of git://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-fs
Pull hw lockdown support from David Howells:
"Annotation of module parameters that configure hardware resources
including ioports, iomem addresses, irq lines and dma channels.
This allows a future patch to prohibit the use of such module
parameters to prevent that hardware from being abused to gain access
to the running kernel image as part of locking the kernel down under
UEFI secure boot conditions.
Annotations are made by changing:
module_param(n, t, p)
module_param_named(n, v, t, p)
module_param_array(n, t, m, p)
to:
module_param_hw(n, t, hwtype, p)
module_param_hw_named(n, v, t, hwtype, p)
module_param_hw_array(n, t, hwtype, m, p)
where the module parameter refers to a hardware setting
hwtype specifies the type of the resource being configured. This can
be one of:
ioport Module parameter configures an I/O port
iomem Module parameter configures an I/O mem address
ioport_or_iomem Module parameter could be either (runtime set)
irq Module parameter configures an I/O port
dma Module parameter configures a DMA channel
dma_addr Module parameter configures a DMA buffer address
other Module parameter configures some other value
Note that the hwtype is compile checked, but not currently stored (the
lockdown code probably won't require it). It is, however, there for
future use.
A bonus is that the hwtype can also be used for grepping.
The intention is for the kernel to ignore or reject attempts to set
annotated module parameters if lockdown is enabled. This applies to
options passed on the boot command line, passed to insmod/modprobe or
direct twiddling in /sys/module/ parameter files.
The module initialisation then needs to handle the parameter not being
set, by (1) giving an error, (2) probing for a value or (3) using a
reasonable default.
What I can't do is just reject a module out of hand because it may
take a hardware setting in the module parameters. Some important
modules, some ipmi stuff for instance, both probe for hardware and
allow hardware to be manually specified; if the driver is aborts with
any error, you don't get any ipmi hardware.
Further, trying to do this entirely in the module initialisation code
doesn't protect against sysfs twiddling.
[!] Note that in and of itself, this series of patches should have no
effect on the the size of the kernel or code execution - that is
left to a patch in the next series to effect. It does mark
annotated kernel parameters with a KERNEL_PARAM_FL_HWPARAM flag in
an already existing field"
* tag 'hwparam-20170420' of git://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-fs: (38 commits)
Annotate hardware config module parameters in sound/pci/
Annotate hardware config module parameters in sound/oss/
Annotate hardware config module parameters in sound/isa/
Annotate hardware config module parameters in sound/drivers/
Annotate hardware config module parameters in fs/pstore/
Annotate hardware config module parameters in drivers/watchdog/
Annotate hardware config module parameters in drivers/video/
Annotate hardware config module parameters in drivers/tty/
Annotate hardware config module parameters in drivers/staging/vme/
Annotate hardware config module parameters in drivers/staging/speakup/
Annotate hardware config module parameters in drivers/staging/media/
Annotate hardware config module parameters in drivers/scsi/
Annotate hardware config module parameters in drivers/pcmcia/
Annotate hardware config module parameters in drivers/pci/hotplug/
Annotate hardware config module parameters in drivers/parport/
Annotate hardware config module parameters in drivers/net/wireless/
Annotate hardware config module parameters in drivers/net/wan/
Annotate hardware config module parameters in drivers/net/irda/
Annotate hardware config module parameters in drivers/net/hamradio/
Annotate hardware config module parameters in drivers/net/ethernet/
...
137 files changed, 491 insertions, 428 deletions
diff --git a/arch/x86/mm/testmmiotrace.c b/arch/x86/mm/testmmiotrace.c index 38868adf07ea..f6ae6830b341 100644 --- a/arch/x86/mm/testmmiotrace.c +++ b/arch/x86/mm/testmmiotrace.c @@ -9,7 +9,7 @@ #include <linux/mmiotrace.h> static unsigned long mmio_address; -module_param(mmio_address, ulong, 0); +module_param_hw(mmio_address, ulong, iomem, 0); MODULE_PARM_DESC(mmio_address, " Start address of the mapping of 16 kB " "(or 8 MB if read_far is non-zero)."); diff --git a/drivers/char/applicom.c b/drivers/char/applicom.c index e770ad977472..b67263d6e34b 100644 --- a/drivers/char/applicom.c +++ b/drivers/char/applicom.c @@ -94,9 +94,9 @@ static struct applicom_board { static unsigned int irq = 0; /* interrupt number IRQ */ static unsigned long mem = 0; /* physical segment of board */ -module_param(irq, uint, 0); +module_param_hw(irq, uint, irq, 0); MODULE_PARM_DESC(irq, "IRQ of the Applicom board"); -module_param(mem, ulong, 0); +module_param_hw(mem, ulong, iomem, 0); MODULE_PARM_DESC(mem, "Shared Memory Address of Applicom board"); static unsigned int numboards; /* number of installed boards */ diff --git a/drivers/char/ipmi/ipmi_si_intf.c b/drivers/char/ipmi/ipmi_si_intf.c index b2b618f066e0..59ee93ea84eb 100644 --- a/drivers/char/ipmi/ipmi_si_intf.c +++ b/drivers/char/ipmi/ipmi_si_intf.c @@ -1375,39 +1375,39 @@ MODULE_PARM_DESC(type, "Defines the type of each interface, each" " interface separated by commas. The types are 'kcs'," " 'smic', and 'bt'. For example si_type=kcs,bt will set" " the first interface to kcs and the second to bt"); -module_param_array(addrs, ulong, &num_addrs, 0); +module_param_hw_array(addrs, ulong, iomem, &num_addrs, 0); MODULE_PARM_DESC(addrs, "Sets the memory address of each interface, the" " addresses separated by commas. Only use if an interface" " is in memory. Otherwise, set it to zero or leave" " it blank."); -module_param_array(ports, uint, &num_ports, 0); +module_param_hw_array(ports, uint, ioport, &num_ports, 0); MODULE_PARM_DESC(ports, "Sets the port address of each interface, the" " addresses separated by commas. Only use if an interface" " is a port. Otherwise, set it to zero or leave" " it blank."); -module_param_array(irqs, int, &num_irqs, 0); +module_param_hw_array(irqs, int, irq, &num_irqs, 0); MODULE_PARM_DESC(irqs, "Sets the interrupt of each interface, the" " addresses separated by commas. Only use if an interface" " has an interrupt. Otherwise, set it to zero or leave" " it blank."); -module_param_array(regspacings, int, &num_regspacings, 0); +module_param_hw_array(regspacings, int, other, &num_regspacings, 0); MODULE_PARM_DESC(regspacings, "The number of bytes between the start address" " and each successive register used by the interface. For" " instance, if the start address is 0xca2 and the spacing" " is 2, then the second address is at 0xca4. Defaults" " to 1."); -module_param_array(regsizes, int, &num_regsizes, 0); +module_param_hw_array(regsizes, int, other, &num_regsizes, 0); MODULE_PARM_DESC(regsizes, "The size of the specific IPMI register in bytes." " This should generally be 1, 2, 4, or 8 for an 8-bit," " 16-bit, 32-bit, or 64-bit register. Use this if you" " the 8-bit IPMI register has to be read from a larger" " register."); -module_param_array(regshifts, int, &num_regshifts, 0); +module_param_hw_array(regshifts, int, other, &num_regshifts, 0); MODULE_PARM_DESC(regshifts, "The amount to shift the data read from the." " IPMI register, in bits. For instance, if the data" " is read from a 32-bit word and the IPMI data is in" " bit 8-15, then the shift would be 8"); -module_param_array(slave_addrs, int, &num_slave_addrs, 0); +module_param_hw_array(slave_addrs, int, other, &num_slave_addrs, 0); MODULE_PARM_DESC(slave_addrs, "Set the default IPMB slave address for" " the controller. Normally this is 0x20, but can be" " overridden by this parm. This is an array indexed" diff --git a/drivers/char/mwave/mwavedd.c b/drivers/char/mwave/mwavedd.c index 3a3ff2eb6cba..b5e3103c1175 100644 --- a/drivers/char/mwave/mwavedd.c +++ b/drivers/char/mwave/mwavedd.c @@ -80,10 +80,10 @@ int mwave_3780i_io = 0; int mwave_uart_irq = 0; int mwave_uart_io = 0; module_param(mwave_debug, int, 0); -module_param(mwave_3780i_irq, int, 0); -module_param(mwave_3780i_io, int, 0); -module_param(mwave_uart_irq, int, 0); -module_param(mwave_uart_io, int, 0); +module_param_hw(mwave_3780i_irq, int, irq, 0); +module_param_hw(mwave_3780i_io, int, ioport, 0); +module_param_hw(mwave_uart_irq, int, irq, 0); +module_param_hw(mwave_uart_io, int, ioport, 0); static int mwave_open(struct inode *inode, struct file *file); static int mwave_close(struct inode *inode, struct file *file); diff --git a/drivers/clocksource/cs5535-clockevt.c b/drivers/clocksource/cs5535-clockevt.c index 9a7e37cf56b0..a1df588343f2 100644 --- a/drivers/clocksource/cs5535-clockevt.c +++ b/drivers/clocksource/cs5535-clockevt.c @@ -22,7 +22,7 @@ #define DRV_NAME "cs5535-clockevt" static int timer_irq; -module_param_named(irq, timer_irq, int, 0644); +module_param_hw_named(irq, timer_irq, int, irq, 0644); MODULE_PARM_DESC(irq, "Which IRQ to use for the clock source MFGPT ticks."); /* diff --git a/drivers/cpufreq/speedstep-smi.c b/drivers/cpufreq/speedstep-smi.c index 770a9ae1999a..37b30071c220 100644 --- a/drivers/cpufreq/speedstep-smi.c +++ b/drivers/cpufreq/speedstep-smi.c @@ -378,7 +378,7 @@ static void __exit speedstep_exit(void) cpufreq_unregister_driver(&speedstep_driver); } -module_param(smi_port, int, 0444); +module_param_hw(smi_port, int, ioport, 0444); module_param(smi_cmd, int, 0444); module_param(smi_sig, uint, 0444); diff --git a/drivers/gpio/gpio-104-dio-48e.c b/drivers/gpio/gpio-104-dio-48e.c index 61b50c40b87b..598e209efa2d 100644 --- a/drivers/gpio/gpio-104-dio-48e.c +++ b/drivers/gpio/gpio-104-dio-48e.c @@ -33,11 +33,11 @@ static unsigned int base[MAX_NUM_DIO48E]; static unsigned int num_dio48e; -module_param_array(base, uint, &num_dio48e, 0); +module_param_hw_array(base, uint, ioport, &num_dio48e, 0); MODULE_PARM_DESC(base, "ACCES 104-DIO-48E base addresses"); static unsigned int irq[MAX_NUM_DIO48E]; -module_param_array(irq, uint, NULL, 0); +module_param_hw_array(irq, uint, irq, NULL, 0); MODULE_PARM_DESC(irq, "ACCES 104-DIO-48E interrupt line numbers"); /** diff --git a/drivers/gpio/gpio-104-idi-48.c b/drivers/gpio/gpio-104-idi-48.c index 337c048168d8..51f046e29ff7 100644 --- a/drivers/gpio/gpio-104-idi-48.c +++ b/drivers/gpio/gpio-104-idi-48.c @@ -33,11 +33,11 @@ static unsigned int base[MAX_NUM_IDI_48]; static unsigned int num_idi_48; -module_param_array(base, uint, &num_idi_48, 0); +module_param_hw_array(base, uint, ioport, &num_idi_48, 0); MODULE_PARM_DESC(base, "ACCES 104-IDI-48 base addresses"); static unsigned int irq[MAX_NUM_IDI_48]; -module_param_array(irq, uint, NULL, 0); +module_param_hw_array(irq, uint, irq, NULL, 0); MODULE_PARM_DESC(irq, "ACCES 104-IDI-48 interrupt line numbers"); /** diff --git a/drivers/gpio/gpio-104-idio-16.c b/drivers/gpio/gpio-104-idio-16.c index 5281e1cedb01..ec2ce34ff473 100644 --- a/drivers/gpio/gpio-104-idio-16.c +++ b/drivers/gpio/gpio-104-idio-16.c @@ -33,11 +33,11 @@ static unsigned int base[MAX_NUM_IDIO_16]; static unsigned int num_idio_16; -module_param_array(base, uint, &num_idio_16, 0); +module_param_hw_array(base, uint, ioport, &num_idio_16, 0); MODULE_PARM_DESC(base, "ACCES 104-IDIO-16 base addresses"); static unsigned int irq[MAX_NUM_IDIO_16]; -module_param_array(irq, uint, NULL, 0); +module_param_hw_array(irq, uint, irq, NULL, 0); MODULE_PARM_DESC(irq, "ACCES 104-IDIO-16 interrupt line numbers"); /** diff --git a/drivers/gpio/gpio-gpio-mm.c b/drivers/gpio/gpio-gpio-mm.c index fa4baa2543db..11ade5b288f8 100644 --- a/drivers/gpio/gpio-gpio-mm.c +++ b/drivers/gpio/gpio-gpio-mm.c @@ -31,7 +31,7 @@ static unsigned int base[MAX_NUM_GPIOMM]; static unsigned int num_gpiomm; -module_param_array(base, uint, &num_gpiomm, 0); +module_param_hw_array(base, uint, ioport, &num_gpiomm, 0); MODULE_PARM_DESC(base, "Diamond Systems GPIO-MM base addresses"); /** diff --git a/drivers/gpio/gpio-ws16c48.c b/drivers/gpio/gpio-ws16c48.c index 87d63695dfcf..5037974ac063 100644 --- a/drivers/gpio/gpio-ws16c48.c +++ b/drivers/gpio/gpio-ws16c48.c @@ -30,11 +30,11 @@ static unsigned int base[MAX_NUM_WS16C48]; static unsigned int num_ws16c48; -module_param_array(base, uint, &num_ws16c48, 0); +module_param_hw_array(base, uint, ioport, &num_ws16c48, 0); MODULE_PARM_DESC(base, "WinSystems WS16C48 base addresses"); static unsigned int irq[MAX_NUM_WS16C48]; -module_param_array(irq, uint, NULL, 0); +module_param_hw_array(irq, uint, irq, NULL, 0); MODULE_PARM_DESC(irq, "WinSystems WS16C48 interrupt line numbers"); /** diff --git a/drivers/i2c/busses/i2c-ali15x3.c b/drivers/i2c/busses/i2c-ali15x3.c index 45c5c4883022..6e6bf46bcb52 100644 --- a/drivers/i2c/busses/i2c-ali15x3.c +++ b/drivers/i2c/busses/i2c-ali15x3.c @@ -119,7 +119,7 @@ /* If force_addr is set to anything different from 0, we forcibly enable the device at the given address. */ static u16 force_addr; -module_param(force_addr, ushort, 0); +module_param_hw(force_addr, ushort, ioport, 0); MODULE_PARM_DESC(force_addr, "Initialize the base address of the i2c controller"); diff --git a/drivers/i2c/busses/i2c-elektor.c b/drivers/i2c/busses/i2c-elektor.c index 8af62fb3fe41..5416003e0605 100644 --- a/drivers/i2c/busses/i2c-elektor.c +++ b/drivers/i2c/busses/i2c-elektor.c @@ -323,9 +323,9 @@ MODULE_AUTHOR("Hans Berglund <hb@spacetec.no>"); MODULE_DESCRIPTION("I2C-Bus adapter routines for PCF8584 ISA bus adapter"); MODULE_LICENSE("GPL"); -module_param(base, int, 0); -module_param(irq, int, 0); +module_param_hw(base, int, ioport_or_iomem, 0); +module_param_hw(irq, int, irq, 0); module_param(clock, int, 0); module_param(own, int, 0); -module_param(mmapped, int, 0); +module_param_hw(mmapped, int, other, 0); module_isa_driver(i2c_elektor_driver, 1); diff --git a/drivers/i2c/busses/i2c-parport-light.c b/drivers/i2c/busses/i2c-parport-light.c index 1bcdd10b68b9..faa8fb8f2b8f 100644 --- a/drivers/i2c/busses/i2c-parport-light.c +++ b/drivers/i2c/busses/i2c-parport-light.c @@ -38,11 +38,11 @@ static struct platform_device *pdev; static u16 base; -module_param(base, ushort, 0); +module_param_hw(base, ushort, ioport, 0); MODULE_PARM_DESC(base, "Base I/O address"); static int irq; -module_param(irq, int, 0); +module_param_hw(irq, int, irq, 0); MODULE_PARM_DESC(irq, "IRQ (optional)"); /* ----- Low-level parallel port access ----------------------------------- */ diff --git a/drivers/i2c/busses/i2c-pca-isa.c b/drivers/i2c/busses/i2c-pca-isa.c index ba88f17f636c..946ac646de2a 100644 --- a/drivers/i2c/busses/i2c-pca-isa.c +++ b/drivers/i2c/busses/i2c-pca-isa.c @@ -197,9 +197,9 @@ MODULE_AUTHOR("Ian Campbell <icampbell@arcom.com>"); MODULE_DESCRIPTION("ISA base PCA9564/PCA9665 driver"); MODULE_LICENSE("GPL"); -module_param(base, ulong, 0); +module_param_hw(base, ulong, ioport, 0); MODULE_PARM_DESC(base, "I/O base address"); -module_param(irq, int, 0); +module_param_hw(irq, int, irq, 0); MODULE_PARM_DESC(irq, "IRQ"); module_param(clock, int, 0); MODULE_PARM_DESC(clock, "Clock rate in hertz.\n\t\t" diff --git a/drivers/i2c/busses/i2c-piix4.c b/drivers/i2c/busses/i2c-piix4.c index c21ca7bf2efe..0ecdb47a23ab 100644 --- a/drivers/i2c/busses/i2c-piix4.c +++ b/drivers/i2c/busses/i2c-piix4.c @@ -106,7 +106,7 @@ MODULE_PARM_DESC(force, "Forcibly enable the PIIX4. DANGEROUS!"); /* If force_addr is set to anything different from 0, we forcibly enable the PIIX4 at the given address. VERY DANGEROUS! */ static int force_addr; -module_param (force_addr, int, 0); +module_param_hw(force_addr, int, ioport, 0); MODULE_PARM_DESC(force_addr, "Forcibly enable the PIIX4 at the given address. " "EXTREMELY DANGEROUS!"); diff --git a/drivers/i2c/busses/i2c-sis5595.c b/drivers/i2c/busses/i2c-sis5595.c index 7d58a40faf2d..d543a9867ba4 100644 --- a/drivers/i2c/busses/i2c-sis5595.c +++ b/drivers/i2c/busses/i2c-sis5595.c @@ -119,7 +119,7 @@ static int blacklist[] = { /* If force_addr is set to anything different from 0, we forcibly enable the device at the given address. */ static u16 force_addr; -module_param(force_addr, ushort, 0); +module_param_hw(force_addr, ushort, ioport, 0); MODULE_PARM_DESC(force_addr, "Initialize the base address of the i2c controller"); static struct pci_driver sis5595_driver; diff --git a/drivers/i2c/busses/i2c-viapro.c b/drivers/i2c/busses/i2c-viapro.c index 0ee2646f3b00..0dc45e12bb1d 100644 --- a/drivers/i2c/busses/i2c-viapro.c +++ b/drivers/i2c/busses/i2c-viapro.c @@ -94,7 +94,7 @@ MODULE_PARM_DESC(force, "Forcibly enable the SMBus. DANGEROUS!"); /* If force_addr is set to anything different from 0, we forcibly enable the VT596 at the given address. VERY DANGEROUS! */ static u16 force_addr; -module_param(force_addr, ushort, 0); +module_param_hw(force_addr, ushort, ioport, 0); MODULE_PARM_DESC(force_addr, "Forcibly enable the SMBus at the given address. " "EXTREMELY DANGEROUS!"); diff --git a/drivers/i2c/busses/scx200_acb.c b/drivers/i2c/busses/scx200_acb.c index 0a7e410b6195..e0923bee8d1f 100644 --- a/drivers/i2c/busses/scx200_acb.c +++ b/drivers/i2c/busses/scx200_acb.c @@ -42,7 +42,7 @@ MODULE_LICENSE("GPL"); #define MAX_DEVICES 4 static int base[MAX_DEVICES] = { 0x820, 0x840 }; -module_param_array(base, int, NULL, 0); +module_param_hw_array(base, int, ioport, NULL, 0); MODULE_PARM_DESC(base, "Base addresses for the ACCESS.bus controllers"); #define POLL_TIMEOUT (HZ/5) diff --git a/drivers/iio/adc/stx104.c b/drivers/iio/adc/stx104.c index 2df84fa5e3fc..2da741d27540 100644 --- a/drivers/iio/adc/stx104.c +++ b/drivers/iio/adc/stx104.c @@ -49,7 +49,7 @@ static unsigned int base[max_num_isa_dev(STX104_EXTENT)]; static unsigned int num_stx104; -module_param_array(base, uint, &num_stx104, 0); +module_param_hw_array(base, uint, ioport, &num_stx104, 0); MODULE_PARM_DESC(base, "Apex Embedded Systems STX104 base addresses"); /** diff --git a/drivers/iio/dac/cio-dac.c b/drivers/iio/dac/cio-dac.c index a0464227a3a0..a8dffd938615 100644 --- a/drivers/iio/dac/cio-dac.c +++ b/drivers/iio/dac/cio-dac.c @@ -39,7 +39,7 @@ static unsigned int base[max_num_isa_dev(CIO_DAC_EXTENT)]; static unsigned int num_cio_dac; -module_param_array(base, uint, &num_cio_dac, 0); +module_param_hw_array(base, uint, ioport, &num_cio_dac, 0); MODULE_PARM_DESC(base, "Measurement Computing CIO-DAC base addresses"); /** diff --git a/drivers/input/mouse/inport.c b/drivers/input/mouse/inport.c index 3827a22362de..9ce71dfa0de1 100644 --- a/drivers/input/mouse/inport.c +++ b/drivers/input/mouse/inport.c @@ -78,7 +78,7 @@ MODULE_LICENSE("GPL"); #define INPORT_IRQ 5 static int inport_irq = INPORT_IRQ; -module_param_named(irq, inport_irq, uint, 0); +module_param_hw_named(irq, inport_irq, uint, irq, 0); MODULE_PARM_DESC(irq, "IRQ number (5=default)"); static struct input_dev *inport_dev; diff --git a/drivers/input/mouse/logibm.c b/drivers/input/mouse/logibm.c index e2413113df22..6f165e053f4d 100644 --- a/drivers/input/mouse/logibm.c +++ b/drivers/input/mouse/logibm.c @@ -69,7 +69,7 @@ MODULE_LICENSE("GPL"); #define LOGIBM_IRQ 5 static int logibm_irq = LOGIBM_IRQ; -module_param_named(irq, logibm_irq, uint, 0); +module_param_hw_named(irq, logibm_irq, uint, irq, 0); MODULE_PARM_DESC(irq, "IRQ number (5=default)"); static struct input_dev *logibm_dev; diff --git a/drivers/input/touchscreen/mk712.c b/drivers/input/touchscreen/mk712.c index 36e57deacd03..bd5352824f77 100644 --- a/drivers/input/touchscreen/mk712.c +++ b/drivers/input/touchscreen/mk712.c @@ -50,11 +50,11 @@ MODULE_DESCRIPTION("ICS MicroClock MK712 TouchScreen driver"); MODULE_LICENSE("GPL"); static unsigned int mk712_io = 0x260; /* Also 0x200, 0x208, 0x300 */ -module_param_named(io, mk712_io, uint, 0); +module_param_hw_named(io, mk712_io, uint, ioport, 0); MODULE_PARM_DESC(io, "I/O base address of MK712 touchscreen controller"); static unsigned int mk712_irq = 10; /* Also 12, 14, 15 */ -module_param_named(irq, mk712_irq, uint, 0); +module_param_hw_named(irq, mk712_irq, uint, irq, 0); MODULE_PARM_DESC(irq, "IRQ of MK712 touchscreen controller"); /* eight 8-bit registers */ diff --git a/drivers/isdn/hardware/avm/b1isa.c b/drivers/isdn/hardware/avm/b1isa.c index 31ef8130a87f..54e871a47387 100644 --- a/drivers/isdn/hardware/avm/b1isa.c +++ b/drivers/isdn/hardware/avm/b1isa.c @@ -169,8 +169,8 @@ static struct pci_dev isa_dev[MAX_CARDS]; static int io[MAX_CARDS]; static int irq[MAX_CARDS]; -module_param_array(io, int, NULL, 0); -module_param_array(irq, int, NULL, 0); +module_param_hw_array(io, int, ioport, NULL, 0); +module_param_hw_array(irq, int, irq, NULL, 0); MODULE_PARM_DESC(io, "I/O base address(es)"); MODULE_PARM_DESC(irq, "IRQ number(s) (assigned)"); diff --git a/drivers/isdn/hardware/avm/t1isa.c b/drivers/isdn/hardware/avm/t1isa.c index 72ef18853951..9516203c735f 100644 --- a/drivers/isdn/hardware/avm/t1isa.c +++ b/drivers/isdn/hardware/avm/t1isa.c @@ -516,8 +516,8 @@ static int io[MAX_CARDS]; static int irq[MAX_CARDS]; static int cardnr[MAX_CARDS]; -module_param_array(io, int, NULL, 0); -module_param_array(irq, int, NULL, 0); +module_param_hw_array(io, int, ioport, NULL, 0); +module_param_hw_array(irq, int, irq, NULL, 0); module_param_array(cardnr, int, NULL, 0); MODULE_PARM_DESC(io, "I/O base address(es)"); MODULE_PARM_DESC(irq, "IRQ number(s) (assigned)"); diff --git a/drivers/isdn/hisax/config.c b/drivers/isdn/hisax/config.c index 2d12c6ceeb89..c7d68675b028 100644 --- a/drivers/isdn/hisax/config.c +++ b/drivers/isdn/hisax/config.c @@ -350,13 +350,13 @@ MODULE_AUTHOR("Karsten Keil"); MODULE_LICENSE("GPL"); module_param_array(type, int, NULL, 0); module_param_array(protocol, int, NULL, 0); -module_param_array(io, int, NULL, 0); -module_param_array(irq, int, NULL, 0); -module_param_array(mem, int, NULL, 0); +module_param_hw_array(io, int, ioport, NULL, 0); +module_param_hw_array(irq, int, irq, NULL, 0); +module_param_hw_array(mem, int, iomem, NULL, 0); module_param(id, charp, 0); #ifdef IO0_IO1 -module_param_array(io0, int, NULL, 0); -module_param_array(io1, int, NULL, 0); +module_param_hw_array(io0, int, ioport, NULL, 0); +module_param_hw_array(io1, int, ioport, NULL, 0); #endif #endif /* MODULE */ diff --git a/drivers/media/pci/zoran/zoran_card.c b/drivers/media/pci/zoran/zoran_card.c index 5266755add63..4680f001653a 100644 --- a/drivers/media/pci/zoran/zoran_card.c +++ b/drivers/media/pci/zoran/zoran_card.c @@ -69,7 +69,7 @@ MODULE_PARM_DESC(card, "Card type"); */ static unsigned long vidmem; /* default = 0 - Video memory base address */ -module_param(vidmem, ulong, 0444); +module_param_hw(vidmem, ulong, iomem, 0444); MODULE_PARM_DESC(vidmem, "Default video memory base address"); /* diff --git a/drivers/media/rc/serial_ir.c b/drivers/media/rc/serial_ir.c index 2f0a0d248936..77d5d4cbed0a 100644 --- a/drivers/media/rc/serial_ir.c +++ b/drivers/media/rc/serial_ir.c @@ -833,11 +833,11 @@ MODULE_LICENSE("GPL"); module_param(type, int, 0444); MODULE_PARM_DESC(type, "Hardware type (0 = home-brew, 1 = IRdeo, 2 = IRdeo Remote, 3 = AnimaX, 4 = IgorPlug"); -module_param(io, int, 0444); +module_param_hw(io, int, ioport, 0444); MODULE_PARM_DESC(io, "I/O address base (0x3f8 or 0x2f8)"); /* some architectures (e.g. intel xscale) have memory mapped registers */ -module_param(iommap, ulong, 0444); +module_param_hw(iommap, ulong, other, 0444); MODULE_PARM_DESC(iommap, "physical base for memory mapped I/O (0 = no memory mapped io)"); /* @@ -845,13 +845,13 @@ MODULE_PARM_DESC(iommap, "physical base for memory mapped I/O (0 = no memory map * on 32bit word boundaries. * See linux-kernel/drivers/tty/serial/8250/8250.c serial_in()/out() */ -module_param(ioshift, int, 0444); +module_param_hw(ioshift, int, other, 0444); MODULE_PARM_DESC(ioshift, "shift I/O register offset (0 = no shift)"); -module_param(irq, int, 0444); +module_param_hw(irq, int, irq, 0444); MODULE_PARM_DESC(irq, "Interrupt (4 or 3)"); -module_param(share_irq, bool, 0444); +module_param_hw(share_irq, bool, other, 0444); MODULE_PARM_DESC(share_irq, "Share interrupts (0 = off, 1 = on)"); module_param(sense, int, 0444); diff --git a/drivers/misc/dummy-irq.c b/drivers/misc/dummy-irq.c index acbbe0390be4..76a1015d5783 100644 --- a/drivers/misc/dummy-irq.c +++ b/drivers/misc/dummy-irq.c @@ -59,6 +59,6 @@ module_exit(dummy_irq_exit); MODULE_LICENSE("GPL"); MODULE_AUTHOR("Jiri Kosina"); -module_param(irq, uint, 0444); +module_param_hw(irq, uint, irq, 0444); MODULE_PARM_DESC(irq, "The IRQ to register for"); MODULE_DESCRIPTION("Dummy IRQ handler driver"); diff --git a/drivers/mmc/host/wbsd.c b/drivers/mmc/host/wbsd.c index bd04e8bae010..e15a9733fcfd 100644 --- a/drivers/mmc/host/wbsd.c +++ b/drivers/mmc/host/wbsd.c @@ -2001,11 +2001,11 @@ static void __exit wbsd_drv_exit(void) module_init(wbsd_drv_init); module_exit(wbsd_drv_exit); #ifdef CONFIG_PNP -module_param_named(nopnp, param_nopnp, uint, 0444); +module_param_hw_named(nopnp, param_nopnp, uint, other, 0444); #endif -module_param_named(io, param_io, uint, 0444); -module_param_named(irq, param_irq, uint, 0444); -module_param_named(dma, param_dma, int, 0444); +module_param_hw_named(io, param_io, uint, ioport, 0444); +module_param_hw_named(irq, param_irq, uint, irq, 0444); +module_param_hw_named(dma, param_dma, int, dma, 0444); MODULE_LICENSE("GPL"); MODULE_AUTHOR("Pierre Ossman <pierre@ossman.eu>"); diff --git a/drivers/net/appletalk/cops.c b/drivers/net/appletalk/cops.c index 1b2e9217ec78..486e1e6997fc 100644 --- a/drivers/net/appletalk/cops.c +++ b/drivers/net/appletalk/cops.c @@ -986,9 +986,9 @@ static int cops_close(struct net_device *dev) static struct net_device *cops_dev; MODULE_LICENSE("GPL"); -module_param(io, int, 0); -module_param(irq, int, 0); -module_param(board_type, int, 0); +module_param_hw(io, int, ioport, 0); +module_param_hw(irq, int, irq, 0); +module_param_hw(board_type, int, other, 0); static int __init cops_module_init(void) { diff --git a/drivers/net/appletalk/ltpc.c b/drivers/net/appletalk/ltpc.c index 01e2ac55c137..ac755d2950a6 100644 --- a/drivers/net/appletalk/ltpc.c +++ b/drivers/net/appletalk/ltpc.c @@ -1231,9 +1231,9 @@ static struct net_device *dev_ltpc; MODULE_LICENSE("GPL"); module_param(debug, int, 0); -module_param(io, int, 0); -module_param(irq, int, 0); -module_param(dma, int, 0); +module_param_hw(io, int, ioport, 0); +module_param_hw(irq, int, irq, 0); +module_param_hw(dma, int, dma, 0); static int __init ltpc_module_init(void) diff --git a/drivers/net/arcnet/com20020-isa.c b/drivers/net/arcnet/com20020-isa.c index b9e9931353b2..38fa60ddaf2e 100644 --- a/drivers/net/arcnet/com20020-isa.c +++ b/drivers/net/arcnet/com20020-isa.c @@ -129,8 +129,8 @@ static int clockp = 0; static int clockm = 0; module_param(node, int, 0); -module_param(io, int, 0); -module_param(irq, int, 0); +module_param_hw(io, int, ioport, 0); +module_param_hw(irq, int, irq, 0); module_param_string(device, device, sizeof(device), 0); module_param(timeout, int, 0); module_param(backplane, int, 0); diff --git a/drivers/net/arcnet/com90io.c b/drivers/net/arcnet/com90io.c index b57863df5bf5..4e56aaf2b984 100644 --- a/drivers/net/arcnet/com90io.c +++ b/drivers/net/arcnet/com90io.c @@ -347,8 +347,8 @@ static int io; /* use the insmod io= irq= shmem= options */ static int irq; static char device[9]; /* use eg. device=arc1 to change name */ -module_param(io, int, 0); -module_param(irq, int, 0); +module_param_hw(io, int, ioport, 0); +module_param_hw(irq, int, irq, 0); module_param_string(device, device, sizeof(device), 0); MODULE_LICENSE("GPL"); diff --git a/drivers/net/arcnet/com90xx.c b/drivers/net/arcnet/com90xx.c index 81f90c4703ae..ca4a57c30bf8 100644 --- a/drivers/net/arcnet/com90xx.c +++ b/drivers/net/arcnet/com90xx.c @@ -88,8 +88,8 @@ static int irq; static int shmem; static char device[9]; /* use eg. device=arc1 to change name */ -module_param(io, int, 0); -module_param(irq, int, 0); +module_param_hw(io, int, ioport, 0); +module_param_hw(irq, int, irq, 0); module_param(shmem, int, 0); module_param_string(device, device, sizeof(device), 0); diff --git a/drivers/net/can/cc770/cc770_isa.c b/drivers/net/can/cc770/cc770_isa.c index e0d15711e9ac..3a30fd3b4498 100644 --- a/drivers/net/can/cc770/cc770_isa.c +++ b/drivers/net/can/cc770/cc770_isa.c @@ -82,16 +82,16 @@ static u8 cor[MAXDEV] = {[0 ... (MAXDEV - 1)] = 0xff}; static u8 bcr[MAXDEV] = {[0 ... (MAXDEV - 1)] = 0xff}; static int indirect[MAXDEV] = {[0 ... (MAXDEV - 1)] = -1}; -module_param_array(port, ulong, NULL, S_IRUGO); +module_param_hw_array(port, ulong, ioport, NULL, S_IRUGO); MODULE_PARM_DESC(port, "I/O port number"); -module_param_array(mem, ulong, NULL, S_IRUGO); +module_param_hw_array(mem, ulong, iomem, NULL, S_IRUGO); MODULE_PARM_DESC(mem, "I/O memory address"); -module_param_array(indirect, int, NULL, S_IRUGO); +module_param_hw_array(indirect, int, ioport, NULL, S_IRUGO); MODULE_PARM_DESC(indirect, "Indirect access via address and data port"); -module_param_array(irq, int, NULL, S_IRUGO); +module_param_hw_array(irq, int, irq, NULL, S_IRUGO); MODULE_PARM_DESC(irq, "IRQ number"); module_param_array(clk, int, NULL, S_IRUGO); diff --git a/drivers/net/can/sja1000/sja1000_isa.c b/drivers/net/can/sja1000/sja1000_isa.c index e97e6d35b300..a89c1e92554d 100644 --- a/drivers/net/can/sja1000/sja1000_isa.c +++ b/drivers/net/can/sja1000/sja1000_isa.c @@ -48,16 +48,16 @@ static unsigned char ocr[MAXDEV] = {[0 ... (MAXDEV - 1)] = 0xff}; static int indirect[MAXDEV] = {[0 ... (MAXDEV - 1)] = -1}; static spinlock_t indirect_lock[MAXDEV]; /* lock for indirect access mode */ -module_param_array(port, ulong, NULL, S_IRUGO); +module_param_hw_array(port, ulong, ioport, NULL, S_IRUGO); MODULE_PARM_DESC(port, "I/O port number"); -module_param_array(mem, ulong, NULL, S_IRUGO); +module_param_hw_array(mem, ulong, iomem, NULL, S_IRUGO); MODULE_PARM_DESC(mem, "I/O memory address"); -module_param_array(indirect, int, NULL, S_IRUGO); +module_param_hw_array(indirect, int, ioport, NULL, S_IRUGO); MODULE_PARM_DESC(indirect, "Indirect access via address and data port"); -module_param_array(irq, int, NULL, S_IRUGO); +module_param_hw_array(irq, int, irq, NULL, S_IRUGO); MODULE_PARM_DESC(irq, "IRQ number"); module_param_array(clk, int, NULL, S_IRUGO); diff --git a/drivers/net/ethernet/3com/3c509.c b/drivers/net/ethernet/3com/3c509.c index c7f9f2c77da7..db8592d412ab 100644 --- a/drivers/net/ethernet/3com/3c509.c +++ b/drivers/net/ethernet/3com/3c509.c @@ -1371,7 +1371,7 @@ el3_resume(struct device *pdev) #endif /* CONFIG_PM */ module_param(debug,int, 0); -module_param_array(irq, int, NULL, 0); +module_param_hw_array(irq, int, irq, NULL, 0); module_param(max_interrupt_work, int, 0); MODULE_PARM_DESC(debug, "debug level (0-6)"); MODULE_PARM_DESC(irq, "IRQ number(s) (assigned)"); diff --git a/drivers/net/ethernet/3com/3c59x.c b/drivers/net/ethernet/3com/3c59x.c index 40196f41768a..e41245a54f8b 100644 --- a/drivers/net/ethernet/3com/3c59x.c +++ b/drivers/net/ethernet/3com/3c59x.c @@ -813,8 +813,8 @@ module_param(global_enable_wol, int, 0); module_param_array(enable_wol, int, NULL, 0); module_param(rx_copybreak, int, 0); module_param(max_interrupt_work, int, 0); -module_param(compaq_ioaddr, int, 0); -module_param(compaq_irq, int, 0); +module_param_hw(compaq_ioaddr, int, ioport, 0); +module_param_hw(compaq_irq, int, irq, 0); module_param(compaq_device_id, int, 0); module_param(watchdog, int, 0); module_param(global_use_mmio, int, 0); diff --git a/drivers/net/ethernet/8390/ne.c b/drivers/net/ethernet/8390/ne.c index c063b410a163..66f47987e2a2 100644 --- a/drivers/net/ethernet/8390/ne.c +++ b/drivers/net/ethernet/8390/ne.c @@ -74,8 +74,8 @@ static int bad[MAX_NE_CARDS]; static u32 ne_msg_enable; #ifdef MODULE -module_param_array(io, int, NULL, 0); -module_param_array(irq, int, NULL, 0); +module_param_hw_array(io, int, ioport, NULL, 0); +module_param_hw_array(irq, int, irq, NULL, 0); module_param_array(bad, int, NULL, 0); module_param_named(msg_enable, ne_msg_enable, uint, (S_IRUSR|S_IRGRP|S_IROTH)); MODULE_PARM_DESC(io, "I/O base address(es),required"); diff --git a/drivers/net/ethernet/8390/smc-ultra.c b/drivers/net/ethernet/8390/smc-ultra.c index 364b6514f65f..4e02f6a23575 100644 --- a/drivers/net/ethernet/8390/smc-ultra.c +++ b/drivers/net/ethernet/8390/smc-ultra.c @@ -561,8 +561,8 @@ static struct net_device *dev_ultra[MAX_ULTRA_CARDS]; static int io[MAX_ULTRA_CARDS]; static int irq[MAX_ULTRA_CARDS]; -module_param_array(io, int, NULL, 0); -module_param_array(irq, int, NULL, 0); +module_param_hw_array(io, int, ioport, NULL, 0); +module_param_hw_array(irq, int, irq, NULL, 0); module_param_named(msg_enable, ultra_msg_enable, uint, (S_IRUSR|S_IRGRP|S_IROTH)); MODULE_PARM_DESC(io, "I/O base address(es)"); MODULE_PARM_DESC(irq, "IRQ number(s) (assigned)"); diff --git a/drivers/net/ethernet/8390/wd.c b/drivers/net/ethernet/8390/wd.c index ad019cbc698f..6efa2722f850 100644 --- a/drivers/net/ethernet/8390/wd.c +++ b/drivers/net/ethernet/8390/wd.c @@ -503,10 +503,10 @@ static int irq[MAX_WD_CARDS]; static int mem[MAX_WD_CARDS]; static int mem_end[MAX_WD_CARDS]; /* for non std. mem size */ -module_param_array(io, int, NULL, 0); -module_param_array(irq, int, NULL, 0); -module_param_array(mem, int, NULL, 0); -module_param_array(mem_end, int, NULL, 0); +module_param_hw_array(io, int, ioport, NULL, 0); +module_param_hw_array(irq, int, irq, NULL, 0); +module_param_hw_array(mem, int, iomem, NULL, 0); +module_param_hw_array(mem_end, int, iomem, NULL, 0); module_param_named(msg_enable, wd_msg_enable, uint, (S_IRUSR|S_IRGRP|S_IROTH)); MODULE_PARM_DESC(io, "I/O base address(es)"); MODULE_PARM_DESC(irq, "IRQ number(s) (ignored for PureData boards)"); diff --git a/drivers/net/ethernet/amd/lance.c b/drivers/net/ethernet/amd/lance.c index 61a641f23149..12a6a93d221b 100644 --- a/drivers/net/ethernet/amd/lance.c +++ b/drivers/net/ethernet/amd/lance.c @@ -318,9 +318,9 @@ static int io[MAX_CARDS]; static int dma[MAX_CARDS]; static int irq[MAX_CARDS]; -module_param_array(io, int, NULL, 0); -module_param_array(dma, int, NULL, 0); -module_param_array(irq, int, NULL, 0); +module_param_hw_array(io, int, ioport, NULL, 0); +module_param_hw_array(dma, int, dma, NULL, 0); +module_param_hw_array(irq, int, irq, NULL, 0); module_param(lance_debug, int, 0); MODULE_PARM_DESC(io, "LANCE/PCnet I/O base address(es),required"); MODULE_PARM_DESC(dma, "LANCE/PCnet ISA DMA channel (ignored for some devices)"); diff --git a/drivers/net/ethernet/amd/ni65.c b/drivers/net/ethernet/amd/ni65.c index 5985bf220a8d..e248d1ab3e47 100644 --- a/drivers/net/ethernet/amd/ni65.c +++ b/drivers/net/ethernet/amd/ni65.c @@ -1227,9 +1227,9 @@ static void set_multicast_list(struct net_device *dev) #ifdef MODULE static struct net_device *dev_ni65; -module_param(irq, int, 0); -module_param(io, int, 0); -module_param(dma, int, 0); +module_param_hw(irq, int, irq, 0); +module_param_hw(io, int, ioport, 0); +module_param_hw(dma, int, dma, 0); MODULE_PARM_DESC(irq, "ni6510 IRQ number (ignored for some cards)"); MODULE_PARM_DESC(io, "ni6510 I/O base address"); MODULE_PARM_DESC(dma, "ni6510 ISA DMA channel (ignored for some cards)"); diff --git a/drivers/net/ethernet/cirrus/cs89x0.c b/drivers/net/ethernet/cirrus/cs89x0.c index 47384f7323ac..da5b58b853e2 100644 --- a/drivers/net/ethernet/cirrus/cs89x0.c +++ b/drivers/net/ethernet/cirrus/cs89x0.c @@ -1704,12 +1704,12 @@ static int use_dma; /* These generate unused var warnings if ALLOW_DMA = 0 */ static int dma; static int dmasize = 16; /* or 64 */ -module_param(io, int, 0); -module_param(irq, int, 0); +module_param_hw(io, int, ioport, 0); +module_param_hw(irq, int, irq, 0); module_param(debug, int, 0); module_param_string(media, media, sizeof(media), 0); module_param(duplex, int, 0); -module_param(dma , int, 0); +module_param_hw(dma , int, dma, 0); module_param(dmasize , int, 0); module_param(use_dma , int, 0); MODULE_PARM_DESC(io, "cs89x0 I/O base address"); diff --git a/drivers/net/ethernet/dec/tulip/de4x5.c b/drivers/net/ethernet/dec/tulip/de4x5.c index df4a871df633..fd6bcf024729 100644 --- a/drivers/net/ethernet/dec/tulip/de4x5.c +++ b/drivers/net/ethernet/dec/tulip/de4x5.c @@ -1015,7 +1015,7 @@ static int compact_infoblock(struct net_device *dev, u_char count, u_char *p static int io=0x0;/* EDIT THIS LINE FOR YOUR CONFIGURATION IF NEEDED */ -module_param(io, int, 0); +module_param_hw(io, int, ioport, 0); module_param(de4x5_debug, int, 0); module_param(dec_only, int, 0); module_param(args, charp, 0); diff --git a/drivers/net/ethernet/hp/hp100.c b/drivers/net/ethernet/hp/hp100.c index 1a31bee6e728..5673b071e39d 100644 --- a/drivers/net/ethernet/hp/hp100.c +++ b/drivers/net/ethernet/hp/hp100.c @@ -2966,7 +2966,7 @@ MODULE_DESCRIPTION("HP CASCADE Architecture Driver for 100VG-AnyLan Network Adap #define HP100_DEVICES 5 /* Parameters set by insmod */ static int hp100_port[HP100_DEVICES] = { 0, [1 ... (HP100_DEVICES-1)] = -1 }; -module_param_array(hp100_port, int, NULL, 0); +module_param_hw_array(hp100_port, int, ioport, NULL, 0); /* List of devices */ static struct net_device *hp100_devlist[HP100_DEVICES]; diff --git a/drivers/net/ethernet/realtek/atp.c b/drivers/net/ethernet/realtek/atp.c index 9bcd4aefc9c5..bed34684994f 100644 --- a/drivers/net/ethernet/realtek/atp.c +++ b/drivers/net/ethernet/realtek/atp.c @@ -151,8 +151,8 @@ MODULE_LICENSE("GPL"); module_param(max_interrupt_work, int, 0); module_param(debug, int, 0); -module_param_array(io, int, NULL, 0); -module_param_array(irq, int, NULL, 0); +module_param_hw_array(io, int, ioport, NULL, 0); +module_param_hw_array(irq, int, irq, NULL, 0); module_param_array(xcvr, int, NULL, 0); MODULE_PARM_DESC(max_interrupt_work, "ATP maximum events handled per interrupt"); MODULE_PARM_DESC(debug, "ATP debug level (0-7)"); diff --git a/drivers/net/ethernet/smsc/smc9194.c b/drivers/net/ethernet/smsc/smc9194.c index c8d84679ede7..d3bb2ba51f40 100644 --- a/drivers/net/ethernet/smsc/smc9194.c +++ b/drivers/net/ethernet/smsc/smc9194.c @@ -1501,8 +1501,8 @@ static void smc_set_multicast_list(struct net_device *dev) static struct net_device *devSMC9194; MODULE_LICENSE("GPL"); -module_param(io, int, 0); -module_param(irq, int, 0); +module_param_hw(io, int, ioport, 0); +module_param_hw(irq, int, irq, 0); module_param(ifport, int, 0); MODULE_PARM_DESC(io, "SMC 99194 I/O base address"); MODULE_PARM_DESC(irq, "SMC 99194 IRQ number"); diff --git a/drivers/net/hamradio/baycom_epp.c b/drivers/net/hamradio/baycom_epp.c index 594fa1407e29..1503f10122f7 100644 --- a/drivers/net/hamradio/baycom_epp.c +++ b/drivers/net/hamradio/baycom_epp.c @@ -1176,7 +1176,7 @@ static int iobase[NR_PORTS] = { 0x378, }; module_param_array(mode, charp, NULL, 0); MODULE_PARM_DESC(mode, "baycom operating mode"); -module_param_array(iobase, int, NULL, 0); +module_param_hw_array(iobase, int, ioport, NULL, 0); MODULE_PARM_DESC(iobase, "baycom io base address"); MODULE_AUTHOR("Thomas M. Sailer, sailer@ife.ee.ethz.ch, hb9jnx@hb9w.che.eu"); diff --git a/drivers/net/hamradio/baycom_par.c b/drivers/net/hamradio/baycom_par.c index 809dc25909d1..92b13b39f426 100644 --- a/drivers/net/hamradio/baycom_par.c +++ b/drivers/net/hamradio/baycom_par.c @@ -481,7 +481,7 @@ static int iobase[NR_PORTS] = { 0x378, }; module_param_array(mode, charp, NULL, 0); MODULE_PARM_DESC(mode, "baycom operating mode; eg. par96 or picpar"); -module_param_array(iobase, int, NULL, 0); +module_param_hw_array(iobase, int, ioport, NULL, 0); MODULE_PARM_DESC(iobase, "baycom io base address"); MODULE_AUTHOR("Thomas M. Sailer, sailer@ife.ee.ethz.ch, hb9jnx@hb9w.che.eu"); diff --git a/drivers/net/hamradio/baycom_ser_fdx.c b/drivers/net/hamradio/baycom_ser_fdx.c index ebc06822fd4d..d9a646acca20 100644 --- a/drivers/net/hamradio/baycom_ser_fdx.c +++ b/drivers/net/hamradio/baycom_ser_fdx.c @@ -614,9 +614,9 @@ static int baud[NR_PORTS] = { [0 ... NR_PORTS-1] = 1200 }; module_param_array(mode, charp, NULL, 0); MODULE_PARM_DESC(mode, "baycom operating mode; * for software DCD"); -module_param_array(iobase, int, NULL, 0); +module_param_hw_array(iobase, int, ioport, NULL, 0); MODULE_PARM_DESC(iobase, "baycom io base address"); -module_param_array(irq, int, NULL, 0); +module_param_hw_array(irq, int, irq, NULL, 0); MODULE_PARM_DESC(irq, "baycom irq number"); module_param_array(baud, int, NULL, 0); MODULE_PARM_DESC(baud, "baycom baud rate (300 to 4800)"); diff --git a/drivers/net/hamradio/baycom_ser_hdx.c b/drivers/net/hamradio/baycom_ser_hdx.c index 60fcf512c208..f1c8a9ff3891 100644 --- a/drivers/net/hamradio/baycom_ser_hdx.c +++ b/drivers/net/hamradio/baycom_ser_hdx.c @@ -642,9 +642,9 @@ static int irq[NR_PORTS] = { 4, }; module_param_array(mode, charp, NULL, 0); MODULE_PARM_DESC(mode, "baycom operating mode; * for software DCD"); -module_param_array(iobase, int, NULL, 0); +module_param_hw_array(iobase, int, ioport, NULL, 0); MODULE_PARM_DESC(iobase, "baycom io base address"); -module_param_array(irq, int, NULL, 0); +module_param_hw_array(irq, int, irq, NULL, 0); MODULE_PARM_DESC(irq, "baycom irq number"); MODULE_AUTHOR("Thomas M. Sailer, sailer@ife.ee.ethz.ch, hb9jnx@hb9w.che.eu"); diff --git a/drivers/net/hamradio/dmascc.c b/drivers/net/hamradio/dmascc.c index 2479072981a1..dec6b76bc0fb 100644 --- a/drivers/net/hamradio/dmascc.c +++ b/drivers/net/hamradio/dmascc.c @@ -274,7 +274,7 @@ static unsigned long rand; MODULE_AUTHOR("Klaus Kudielka"); MODULE_DESCRIPTION("Driver for high-speed SCC boards"); -module_param_array(io, int, NULL, 0); +module_param_hw_array(io, int, ioport, NULL, 0); MODULE_LICENSE("GPL"); static void __exit dmascc_exit(void) diff --git a/drivers/net/irda/ali-ircc.c b/drivers/net/irda/ali-ircc.c index c285eafd3f1c..35f198d83701 100644 --- a/drivers/net/irda/ali-ircc.c +++ b/drivers/net/irda/ali-ircc.c @@ -2207,11 +2207,11 @@ MODULE_LICENSE("GPL"); MODULE_ALIAS("platform:" ALI_IRCC_DRIVER_NAME); -module_param_array(io, int, NULL, 0); +module_param_hw_array(io, int, ioport, NULL, 0); MODULE_PARM_DESC(io, "Base I/O addresses"); -module_param_array(irq, int, NULL, 0); +module_param_hw_array(irq, int, irq, NULL, 0); MODULE_PARM_DESC(irq, "IRQ lines"); -module_param_array(dma, int, NULL, 0); +module_param_hw_array(dma, int, dma, NULL, 0); MODULE_PARM_DESC(dma, "DMA channels"); module_init(ali_ircc_init); diff --git a/drivers/net/irda/nsc-ircc.c b/drivers/net/irda/nsc-ircc.c index aaecc3baaf30..7beae147be11 100644 --- a/drivers/net/irda/nsc-ircc.c +++ b/drivers/net/irda/nsc-ircc.c @@ -2396,11 +2396,11 @@ MODULE_LICENSE("GPL"); module_param(qos_mtt_bits, int, 0); MODULE_PARM_DESC(qos_mtt_bits, "Minimum Turn Time"); -module_param_array(io, int, NULL, 0); +module_param_hw_array(io, int, ioport, NULL, 0); MODULE_PARM_DESC(io, "Base I/O addresses"); -module_param_array(irq, int, NULL, 0); +module_param_hw_array(irq, int, irq, NULL, 0); MODULE_PARM_DESC(irq, "IRQ lines"); -module_param_array(dma, int, NULL, 0); +module_param_hw_array(dma, int, dma, NULL, 0); MODULE_PARM_DESC(dma, "DMA channels"); module_param(dongle_id, int, 0); MODULE_PARM_DESC(dongle_id, "Type-id of used dongle"); diff --git a/drivers/net/irda/smsc-ircc2.c b/drivers/net/irda/smsc-ircc2.c index dcf92ba80872..23ed89ae5ddc 100644 --- a/drivers/net/irda/smsc-ircc2.c +++ b/drivers/net/irda/smsc-ircc2.c @@ -82,24 +82,24 @@ MODULE_PARM_DESC(nopnp, "Do not use PNP to detect controller settings, defaults #define DMA_INVAL 255 static int ircc_dma = DMA_INVAL; -module_param(ircc_dma, int, 0); +module_param_hw(ircc_dma, int, dma, 0); MODULE_PARM_DESC(ircc_dma, "DMA channel"); #define IRQ_INVAL 255 static int ircc_irq = IRQ_INVAL; -module_param(ircc_irq, int, 0); +module_param_hw(ircc_irq, int, irq, 0); MODULE_PARM_DESC(ircc_irq, "IRQ line"); static int ircc_fir; -module_param(ircc_fir, int, 0); +module_param_hw(ircc_fir, int, ioport, 0); MODULE_PARM_DESC(ircc_fir, "FIR Base Address"); static int ircc_sir; -module_param(ircc_sir, int, 0); +module_param_hw(ircc_sir, int, ioport, 0); MODULE_PARM_DESC(ircc_sir, "SIR Base Address"); static int ircc_cfg; -module_param(ircc_cfg, int, 0); +module_param_hw(ircc_cfg, int, ioport, 0); MODULE_PARM_DESC(ircc_cfg, "Configuration register base address"); static int ircc_transceiver; diff --git a/drivers/net/irda/w83977af_ir.c b/drivers/net/irda/w83977af_ir.c index 8d5b903d1d9d..282b6c9ae05b 100644 --- a/drivers/net/irda/w83977af_ir.c +++ b/drivers/net/irda/w83977af_ir.c @@ -1263,9 +1263,9 @@ MODULE_LICENSE("GPL"); module_param(qos_mtt_bits, int, 0); MODULE_PARM_DESC(qos_mtt_bits, "Mimimum Turn Time"); -module_param_array(io, int, NULL, 0); +module_param_hw_array(io, int, ioport, NULL, 0); MODULE_PARM_DESC(io, "Base I/O addresses"); -module_param_array(irq, int, NULL, 0); +module_param_hw_array(irq, int, irq, NULL, 0); MODULE_PARM_DESC(irq, "IRQ lines"); /* diff --git a/drivers/net/wan/cosa.c b/drivers/net/wan/cosa.c index 4ca71bca39ac..6ea16260ec76 100644 --- a/drivers/net/wan/cosa.c +++ b/drivers/net/wan/cosa.c @@ -232,11 +232,11 @@ static int irq[MAX_CARDS+1] = { -1, -1, -1, -1, -1, -1, 0, }; static struct class *cosa_class; #ifdef MODULE -module_param_array(io, int, NULL, 0); +module_param_hw_array(io, int, ioport, NULL, 0); MODULE_PARM_DESC(io, "The I/O bases of the COSA or SRP cards"); -module_param_array(irq, int, NULL, 0); +module_param_hw_array(irq, int, irq, NULL, 0); MODULE_PARM_DESC(irq, "The IRQ lines of the COSA or SRP cards"); -module_param_array(dma, int, NULL, 0); +module_param_hw_array(dma, int, dma, NULL, 0); MODULE_PARM_DESC(dma, "The DMA channels of the COSA or SRP cards"); MODULE_AUTHOR("Jan \"Yenya\" Kasprzak, <kas@fi.muni.cz>"); diff --git a/drivers/net/wan/hostess_sv11.c b/drivers/net/wan/hostess_sv11.c index dd6bb3364ad2..4de0737fbf8a 100644 --- a/drivers/net/wan/hostess_sv11.c +++ b/drivers/net/wan/hostess_sv11.c @@ -324,11 +324,11 @@ static void sv11_shutdown(struct z8530_dev *dev) static int io = 0x200; static int irq = 9; -module_param(io, int, 0); +module_param_hw(io, int, ioport, 0); MODULE_PARM_DESC(io, "The I/O base of the Comtrol Hostess SV11 card"); -module_param(dma, int, 0); +module_param_hw(dma, int, dma, 0); MODULE_PARM_DESC(dma, "Set this to 1 to use DMA1/DMA3 for TX/RX"); -module_param(irq, int, 0); +module_param_hw(irq, int, irq, 0); MODULE_PARM_DESC(irq, "The interrupt line setting for the Comtrol Hostess SV11 card"); MODULE_AUTHOR("Alan Cox"); diff --git a/drivers/net/wan/sbni.c b/drivers/net/wan/sbni.c index 3ca3419c54a0..bde8c0339831 100644 --- a/drivers/net/wan/sbni.c +++ b/drivers/net/wan/sbni.c @@ -1463,8 +1463,8 @@ set_multicast_list( struct net_device *dev ) #ifdef MODULE -module_param_array(io, int, NULL, 0); -module_param_array(irq, int, NULL, 0); +module_param_hw_array(io, int, ioport, NULL, 0); +module_param_hw_array(irq, int, irq, NULL, 0); module_param_array(baud, int, NULL, 0); module_param_array(rxl, int, NULL, 0); module_param_array(mac, int, NULL, 0); diff --git a/drivers/net/wan/sealevel.c b/drivers/net/wan/sealevel.c index fbb5aa2c4d8f..c56f2c252113 100644 --- a/drivers/net/wan/sealevel.c +++ b/drivers/net/wan/sealevel.c @@ -363,13 +363,13 @@ static int rxdma=3; static int irq=5; static bool slow=false; -module_param(io, int, 0); +module_param_hw(io, int, ioport, 0); MODULE_PARM_DESC(io, "The I/O base of the Sealevel card"); -module_param(txdma, int, 0); +module_param_hw(txdma, int, dma, 0); MODULE_PARM_DESC(txdma, "Transmit DMA channel"); -module_param(rxdma, int, 0); +module_param_hw(rxdma, int, dma, 0); MODULE_PARM_DESC(rxdma, "Receive DMA channel"); -module_param(irq, int, 0); +module_param_hw(irq, int, irq, 0); MODULE_PARM_DESC(irq, "The interrupt line setting for the SeaLevel card"); module_param(slow, bool, 0); MODULE_PARM_DESC(slow, "Set this for an older Sealevel card such as the 4012"); diff --git a/drivers/net/wireless/cisco/airo.c b/drivers/net/wireless/cisco/airo.c index 4b040451a9b8..1b7e125a28e2 100644 --- a/drivers/net/wireless/cisco/airo.c +++ b/drivers/net/wireless/cisco/airo.c @@ -246,8 +246,8 @@ MODULE_DESCRIPTION("Support for Cisco/Aironet 802.11 wireless ethernet cards. " "Direct support for ISA/PCI/MPI cards and support for PCMCIA when used with airo_cs."); MODULE_LICENSE("Dual BSD/GPL"); MODULE_SUPPORTED_DEVICE("Aironet 4500, 4800 and Cisco 340/350"); -module_param_array(io, int, NULL, 0); -module_param_array(irq, int, NULL, 0); +module_param_hw_array(io, int, ioport, NULL, 0); +module_param_hw_array(irq, int, irq, NULL, 0); module_param_array(rates, int, NULL, 0); module_param_array(ssids, charp, NULL, 0); module_param(auto_wep, int, 0); diff --git a/drivers/parport/parport_pc.c b/drivers/parport/parport_pc.c index 9d42dfe65d44..5548193a28a6 100644 --- a/drivers/parport/parport_pc.c +++ b/drivers/parport/parport_pc.c @@ -3150,13 +3150,13 @@ static char *irq[PARPORT_PC_MAX_PORTS]; static char *dma[PARPORT_PC_MAX_PORTS]; MODULE_PARM_DESC(io, "Base I/O address (SPP regs)"); -module_param_array(io, int, NULL, 0); +module_param_hw_array(io, int, ioport, NULL, 0); MODULE_PARM_DESC(io_hi, "Base I/O address (ECR)"); -module_param_array(io_hi, int, NULL, 0); +module_param_hw_array(io_hi, int, ioport, NULL, 0); MODULE_PARM_DESC(irq, "IRQ line"); -module_param_array(irq, charp, NULL, 0); +module_param_hw_array(irq, charp, irq, NULL, 0); MODULE_PARM_DESC(dma, "DMA channel"); -module_param_array(dma, charp, NULL, 0); +module_param_hw_array(dma, charp, dma, NULL, 0); #if defined(CONFIG_PARPORT_PC_SUPERIO) || \ (defined(CONFIG_PARPORT_1284) && defined(CONFIG_PARPORT_PC_FIFO)) MODULE_PARM_DESC(verbose_probing, "Log chit-chat during initialisation"); diff --git a/drivers/pci/hotplug/cpcihp_generic.c b/drivers/pci/hotplug/cpcihp_generic.c index 88a44a707b96..bbf9cf8aeaad 100644 --- a/drivers/pci/hotplug/cpcihp_generic.c +++ b/drivers/pci/hotplug/cpcihp_generic.c @@ -220,7 +220,7 @@ module_param(first_slot, byte, 0); MODULE_PARM_DESC(first_slot, "Hotswap bus first slot number"); module_param(last_slot, byte, 0); MODULE_PARM_DESC(last_slot, "Hotswap bus last slot number"); -module_param(port, ushort, 0); +module_param_hw(port, ushort, ioport, 0); MODULE_PARM_DESC(port, "#ENUM signal I/O port"); module_param(enum_bit, uint, 0); MODULE_PARM_DESC(enum_bit, "#ENUM signal bit (0-7)"); diff --git a/drivers/pcmcia/i82365.c b/drivers/pcmcia/i82365.c index eb0d80a429e4..fb38cc01859f 100644 --- a/drivers/pcmcia/i82365.c +++ b/drivers/pcmcia/i82365.c @@ -108,12 +108,12 @@ static int async_clock = -1; static int cable_mode = -1; static int wakeup = 0; -module_param(i365_base, ulong, 0444); +module_param_hw(i365_base, ulong, ioport, 0444); module_param(ignore, int, 0444); module_param(extra_sockets, int, 0444); -module_param(irq_mask, int, 0444); -module_param_array(irq_list, int, &irq_list_count, 0444); -module_param(cs_irq, int, 0444); +module_param_hw(irq_mask, int, other, 0444); +module_param_hw_array(irq_list, int, irq, &irq_list_count, 0444); +module_param_hw(cs_irq, int, irq, 0444); module_param(async_clock, int, 0444); module_param(cable_mode, int, 0444); module_param(wakeup, int, 0444); diff --git a/drivers/pcmcia/tcic.c b/drivers/pcmcia/tcic.c index 1ee63e5f0550..a1ac72d51d70 100644 --- a/drivers/pcmcia/tcic.c +++ b/drivers/pcmcia/tcic.c @@ -85,12 +85,12 @@ static int poll_quick = HZ/20; /* CCLK external clock time, in nanoseconds. 70 ns = 14.31818 MHz */ static int cycle_time = 70; -module_param(tcic_base, ulong, 0444); +module_param_hw(tcic_base, ulong, ioport, 0444); module_param(ignore, int, 0444); module_param(do_scan, int, 0444); -module_param(irq_mask, int, 0444); -module_param_array(irq_list, int, &irq_list_count, 0444); -module_param(cs_irq, int, 0444); +module_param_hw(irq_mask, int, other, 0444); +module_param_hw_array(irq_list, int, irq, &irq_list_count, 0444); +module_param_hw(cs_irq, int, irq, 0444); module_param(poll_interval, int, 0444); module_param(poll_quick, int, 0444); module_param(cycle_time, int, 0444); diff --git a/drivers/scsi/aha152x.c b/drivers/scsi/aha152x.c index f44d0487236e..ce5dc73d85bb 100644 --- a/drivers/scsi/aha152x.c +++ b/drivers/scsi/aha152x.c @@ -331,11 +331,11 @@ MODULE_LICENSE("GPL"); #if !defined(PCMCIA) #if defined(MODULE) static int io[] = {0, 0}; -module_param_array(io, int, NULL, 0); +module_param_hw_array(io, int, ioport, NULL, 0); MODULE_PARM_DESC(io,"base io address of controller"); static int irq[] = {0, 0}; -module_param_array(irq, int, NULL, 0); +module_param_hw_array(irq, int, irq, NULL, 0); MODULE_PARM_DESC(irq,"interrupt for controller"); static int scsiid[] = {7, 7}; diff --git a/drivers/scsi/aha1542.c b/drivers/scsi/aha1542.c index 7db448ec8beb..a23cc9ac5acd 100644 --- a/drivers/scsi/aha1542.c +++ b/drivers/scsi/aha1542.c @@ -31,7 +31,7 @@ module_param(isapnp, bool, 0); MODULE_PARM_DESC(isapnp, "enable PnP support (default=1)"); static int io[MAXBOARDS] = { 0x330, 0x334, 0, 0 }; -module_param_array(io, int, NULL, 0); +module_param_hw_array(io, int, ioport, NULL, 0); MODULE_PARM_DESC(io, "base IO address of controller (0x130,0x134,0x230,0x234,0x330,0x334, default=0x330,0x334)"); /* time AHA spends on the AT-bus during data transfer */ diff --git a/drivers/scsi/g_NCR5380.c b/drivers/scsi/g_NCR5380.c index 67c8dac321ad..c34fc91ba486 100644 --- a/drivers/scsi/g_NCR5380.c +++ b/drivers/scsi/g_NCR5380.c @@ -85,8 +85,8 @@ static int ncr_53c400; static int ncr_53c400a; static int dtc_3181e; static int hp_c2502; -module_param(ncr_irq, int, 0); -module_param(ncr_addr, int, 0); +module_param_hw(ncr_irq, int, irq, 0); +module_param_hw(ncr_addr, int, ioport, 0); module_param(ncr_5380, int, 0); module_param(ncr_53c400, int, 0); module_param(ncr_53c400a, int, 0); @@ -94,11 +94,11 @@ module_param(dtc_3181e, int, 0); module_param(hp_c2502, int, 0); static int irq[] = { -1, -1, -1, -1, -1, -1, -1, -1 }; -module_param_array(irq, int, NULL, 0); +module_param_hw_array(irq, int, irq, NULL, 0); MODULE_PARM_DESC(irq, "IRQ number(s) (0=none, 254=auto [default])"); static int base[] = { 0, 0, 0, 0, 0, 0, 0, 0 }; -module_param_array(base, int, NULL, 0); +module_param_hw_array(base, int, ioport, NULL, 0); MODULE_PARM_DESC(base, "base address(es)"); static int card[] = { -1, -1, -1, -1, -1, -1, -1, -1 }; diff --git a/drivers/scsi/gdth.c b/drivers/scsi/gdth.c index d020a13646ae..facc7271f932 100644 --- a/drivers/scsi/gdth.c +++ b/drivers/scsi/gdth.c @@ -353,7 +353,7 @@ static int probe_eisa_isa = 0; static int force_dma32 = 0; /* parameters for modprobe/insmod */ -module_param_array(irq, int, NULL, 0); +module_param_hw_array(irq, int, irq, NULL, 0); module_param(disable, int, 0); module_param(reserve_mode, int, 0); module_param_array(reserve_list, int, NULL, 0); diff --git a/drivers/scsi/qlogicfas.c b/drivers/scsi/qlogicfas.c index 61cac87fb86f..840823b99e51 100644 --- a/drivers/scsi/qlogicfas.c +++ b/drivers/scsi/qlogicfas.c @@ -137,8 +137,8 @@ err: static struct qlogicfas408_priv *cards; static int iobase[MAX_QLOGICFAS]; static int irq[MAX_QLOGICFAS] = { [0 ... MAX_QLOGICFAS-1] = -1 }; -module_param_array(iobase, int, NULL, 0); -module_param_array(irq, int, NULL, 0); +module_param_hw_array(iobase, int, ioport, NULL, 0); +module_param_hw_array(irq, int, irq, NULL, 0); MODULE_PARM_DESC(iobase, "I/O address"); MODULE_PARM_DESC(irq, "IRQ"); diff --git a/drivers/staging/speakup/speakup_acntpc.c b/drivers/staging/speakup/speakup_acntpc.c index ad72f8e883fc..a041441766aa 100644 --- a/drivers/staging/speakup/speakup_acntpc.c +++ b/drivers/staging/speakup/speakup_acntpc.c @@ -310,7 +310,7 @@ static void accent_release(void) speakup_info.port_tts = 0; } -module_param_named(port, port_forced, int, 0444); +module_param_hw_named(port, port_forced, int, ioport, 0444); module_param_named(start, synth_acntpc.startup, short, 0444); MODULE_PARM_DESC(port, "Set the port for the synthesizer (override probing)."); diff --git a/drivers/staging/speakup/speakup_dtlk.c b/drivers/staging/speakup/speakup_dtlk.c index 5973acc0a006..33180937222d 100644 --- a/drivers/staging/speakup/speakup_dtlk.c +++ b/drivers/staging/speakup/speakup_dtlk.c @@ -382,7 +382,7 @@ static void dtlk_release(void) speakup_info.port_tts = 0; } -module_param_named(port, port_forced, int, 0444); +module_param_hw_named(port, port_forced, int, ioport, 0444); module_param_named(start, synth_dtlk.startup, short, 0444); MODULE_PARM_DESC(port, "Set the port for the synthesizer (override probing)."); diff --git a/drivers/staging/speakup/speakup_keypc.c b/drivers/staging/speakup/speakup_keypc.c index ba7901178e0b..d3203f8fc3d0 100644 --- a/drivers/staging/speakup/speakup_keypc.c +++ b/drivers/staging/speakup/speakup_keypc.c @@ -312,7 +312,7 @@ static void keynote_release(void) synth_port = 0; } -module_param_named(port, port_forced, int, 0444); +module_param_hw_named(port, port_forced, int, ioport, 0444); module_param_named(start, synth_keypc.startup, short, 0444); MODULE_PARM_DESC(port, "Set the port for the synthesizer (override probing)."); diff --git a/drivers/staging/vme/devices/vme_pio2_core.c b/drivers/staging/vme/devices/vme_pio2_core.c index 20a2d835fdaa..367535b4b77f 100644 --- a/drivers/staging/vme/devices/vme_pio2_core.c +++ b/drivers/staging/vme/devices/vme_pio2_core.c @@ -466,16 +466,16 @@ static void __exit pio2_exit(void) /* These are required for each board */ MODULE_PARM_DESC(bus, "Enumeration of VMEbus to which the board is connected"); -module_param_array(bus, int, &bus_num, 0444); +module_param_hw_array(bus, int, other, &bus_num, 0444); MODULE_PARM_DESC(base, "Base VME address for PIO2 Registers"); -module_param_array(base, long, &base_num, 0444); +module_param_hw_array(base, long, other, &base_num, 0444); MODULE_PARM_DESC(vector, "VME IRQ Vector (Lower 4 bits masked)"); -module_param_array(vector, int, &vector_num, 0444); +module_param_hw_array(vector, int, other, &vector_num, 0444); MODULE_PARM_DESC(level, "VME IRQ Level"); -module_param_array(level, int, &level_num, 0444); +module_param_hw_array(level, int, other, &level_num, 0444); MODULE_PARM_DESC(variant, "Last 4 characters of PIO2 board variant"); module_param_array(variant, charp, &variant_num, 0444); diff --git a/drivers/tty/cyclades.c b/drivers/tty/cyclades.c index 5e4fa9206861..104f09c58163 100644 --- a/drivers/tty/cyclades.c +++ b/drivers/tty/cyclades.c @@ -156,8 +156,8 @@ static unsigned int cy_isa_addresses[] = { static long maddr[NR_CARDS]; static int irq[NR_CARDS]; -module_param_array(maddr, long, NULL, 0); -module_param_array(irq, int, NULL, 0); +module_param_hw_array(maddr, long, iomem, NULL, 0); +module_param_hw_array(irq, int, irq, NULL, 0); #endif /* CONFIG_ISA */ diff --git a/drivers/tty/moxa.c b/drivers/tty/moxa.c index 4caf0c3b1f99..3b251f4e5df0 100644 --- a/drivers/tty/moxa.c +++ b/drivers/tty/moxa.c @@ -179,7 +179,7 @@ MODULE_FIRMWARE("c320tunx.cod"); module_param_array(type, uint, NULL, 0); MODULE_PARM_DESC(type, "card type: C218=2, C320=4"); -module_param_array(baseaddr, ulong, NULL, 0); +module_param_hw_array(baseaddr, ulong, ioport, NULL, 0); MODULE_PARM_DESC(baseaddr, "base address"); module_param_array(numports, uint, NULL, 0); MODULE_PARM_DESC(numports, "numports (ignored for C218)"); diff --git a/drivers/tty/mxser.c b/drivers/tty/mxser.c index 7b8f383fb090..8bd6fb6d9391 100644 --- a/drivers/tty/mxser.c +++ b/drivers/tty/mxser.c @@ -183,7 +183,7 @@ static int ttymajor = MXSERMAJOR; MODULE_AUTHOR("Casper Yang"); MODULE_DESCRIPTION("MOXA Smartio/Industio Family Multiport Board Device Driver"); -module_param_array(ioaddr, ulong, NULL, 0); +module_param_hw_array(ioaddr, ulong, ioport, NULL, 0); MODULE_PARM_DESC(ioaddr, "ISA io addresses to look for a moxa board"); module_param(ttymajor, int, 0); MODULE_LICENSE("GPL"); diff --git a/drivers/tty/rocket.c b/drivers/tty/rocket.c index d66c1edd9892..b51a877da986 100644 --- a/drivers/tty/rocket.c +++ b/drivers/tty/rocket.c @@ -250,15 +250,15 @@ static int sReadAiopNumChan(WordIO_t io); MODULE_AUTHOR("Theodore Ts'o"); MODULE_DESCRIPTION("Comtrol RocketPort driver"); -module_param(board1, ulong, 0); +module_param_hw(board1, ulong, ioport, 0); MODULE_PARM_DESC(board1, "I/O port for (ISA) board #1"); -module_param(board2, ulong, 0); +module_param_hw(board2, ulong, ioport, 0); MODULE_PARM_DESC(board2, "I/O port for (ISA) board #2"); -module_param(board3, ulong, 0); +module_param_hw(board3, ulong, ioport, 0); MODULE_PARM_DESC(board3, "I/O port for (ISA) board #3"); -module_param(board4, ulong, 0); +module_param_hw(board4, ulong, ioport, 0); MODULE_PARM_DESC(board4, "I/O port for (ISA) board #4"); -module_param(controller, ulong, 0); +module_param_hw(controller, ulong, ioport, 0); MODULE_PARM_DESC(controller, "I/O port for (ISA) rocketport controller"); module_param(support_low_speed, bool, 0); MODULE_PARM_DESC(support_low_speed, "1 means support 50 baud, 0 means support 460400 baud"); diff --git a/drivers/tty/serial/8250/8250_core.c b/drivers/tty/serial/8250/8250_core.c index 48a07e2f617f..1aab3010fbfa 100644 --- a/drivers/tty/serial/8250/8250_core.c +++ b/drivers/tty/serial/8250/8250_core.c @@ -1191,7 +1191,7 @@ module_exit(serial8250_exit); MODULE_LICENSE("GPL"); MODULE_DESCRIPTION("Generic 8250/16x50 serial driver"); -module_param(share_irqs, uint, 0644); +module_param_hw(share_irqs, uint, other, 0644); MODULE_PARM_DESC(share_irqs, "Share IRQs with other non-8250/16x50 devices (unsafe)"); module_param(nr_uarts, uint, 0644); @@ -1201,7 +1201,7 @@ module_param(skip_txen_test, uint, 0644); MODULE_PARM_DESC(skip_txen_test, "Skip checking for the TXEN bug at init time"); #ifdef CONFIG_SERIAL_8250_RSA -module_param_array(probe_rsa, ulong, &probe_rsa_count, 0444); +module_param_hw_array(probe_rsa, ulong, ioport, &probe_rsa_count, 0444); MODULE_PARM_DESC(probe_rsa, "Probe I/O ports for RSA"); #endif MODULE_ALIAS_CHARDEV_MAJOR(TTY_MAJOR); diff --git a/drivers/tty/synclink.c b/drivers/tty/synclink.c index 657eed82eeb3..a2c308f7d637 100644 --- a/drivers/tty/synclink.c +++ b/drivers/tty/synclink.c @@ -869,9 +869,9 @@ static int txholdbufs[MAX_TOTAL_DEVICES]; module_param(break_on_load, bool, 0); module_param(ttymajor, int, 0); -module_param_array(io, int, NULL, 0); -module_param_array(irq, int, NULL, 0); -module_param_array(dma, int, NULL, 0); +module_param_hw_array(io, int, ioport, NULL, 0); +module_param_hw_array(irq, int, irq, NULL, 0); +module_param_hw_array(dma, int, dma, NULL, 0); module_param(debug_level, int, 0); module_param_array(maxframe, int, NULL, 0); module_param_array(txdmabufs, int, NULL, 0); diff --git a/drivers/video/fbdev/arcfb.c b/drivers/video/fbdev/arcfb.c index 1928cb2b5386..7e87d0d61658 100644 --- a/drivers/video/fbdev/arcfb.c +++ b/drivers/video/fbdev/arcfb.c @@ -645,17 +645,17 @@ module_param(nosplash, uint, 0); MODULE_PARM_DESC(nosplash, "Disable doing the splash screen"); module_param(arcfb_enable, uint, 0); MODULE_PARM_DESC(arcfb_enable, "Enable communication with Arc board"); -module_param(dio_addr, ulong, 0); +module_param_hw(dio_addr, ulong, ioport, 0); MODULE_PARM_DESC(dio_addr, "IO address for data, eg: 0x480"); -module_param(cio_addr, ulong, 0); +module_param_hw(cio_addr, ulong, ioport, 0); MODULE_PARM_DESC(cio_addr, "IO address for control, eg: 0x400"); -module_param(c2io_addr, ulong, 0); +module_param_hw(c2io_addr, ulong, ioport, 0); MODULE_PARM_DESC(c2io_addr, "IO address for secondary control, eg: 0x408"); module_param(splashval, ulong, 0); MODULE_PARM_DESC(splashval, "Splash pattern: 0xFF is black, 0x00 is green"); module_param(tuhold, ulong, 0); MODULE_PARM_DESC(tuhold, "Time to hold between strobing data to Arc board"); -module_param(irq, uint, 0); +module_param_hw(irq, uint, irq, 0); MODULE_PARM_DESC(irq, "IRQ for the Arc board"); module_init(arcfb_init); diff --git a/drivers/video/fbdev/n411.c b/drivers/video/fbdev/n411.c index 053deacad7cc..a3677313396e 100644 --- a/drivers/video/fbdev/n411.c +++ b/drivers/video/fbdev/n411.c @@ -193,11 +193,11 @@ module_exit(n411_exit); module_param(nosplash, uint, 0); MODULE_PARM_DESC(nosplash, "Disable doing the splash screen"); -module_param(dio_addr, ulong, 0); +module_param_hw(dio_addr, ulong, ioport, 0); MODULE_PARM_DESC(dio_addr, "IO address for data, eg: 0x480"); -module_param(cio_addr, ulong, 0); +module_param_hw(cio_addr, ulong, ioport, 0); MODULE_PARM_DESC(cio_addr, "IO address for control, eg: 0x400"); -module_param(c2io_addr, ulong, 0); +module_param_hw(c2io_addr, ulong, ioport, 0); MODULE_PARM_DESC(c2io_addr, "IO address for secondary control, eg: 0x408"); module_param(splashval, ulong, 0); MODULE_PARM_DESC(splashval, "Splash pattern: 0x00 is black, 0x01 is white"); diff --git a/drivers/watchdog/cpu5wdt.c b/drivers/watchdog/cpu5wdt.c index 6d03e8e30f8b..6c3f78e45c26 100644 --- a/drivers/watchdog/cpu5wdt.c +++ b/drivers/watchdog/cpu5wdt.c @@ -289,7 +289,7 @@ MODULE_DESCRIPTION("sma cpu5 watchdog driver"); MODULE_SUPPORTED_DEVICE("sma cpu5 watchdog"); MODULE_LICENSE("GPL"); -module_param(port, int, 0); +module_param_hw(port, int, ioport, 0); MODULE_PARM_DESC(port, "base address of watchdog card, default is 0x91"); module_param(verbose, int, 0); diff --git a/drivers/watchdog/eurotechwdt.c b/drivers/watchdog/eurotechwdt.c index 23ee53240c4c..38e96712264f 100644 --- a/drivers/watchdog/eurotechwdt.c +++ b/drivers/watchdog/eurotechwdt.c @@ -97,9 +97,9 @@ MODULE_PARM_DESC(nowayout, #define WDT_TIMER_CFG 0xf3 -module_param(io, int, 0); +module_param_hw(io, int, ioport, 0); MODULE_PARM_DESC(io, "Eurotech WDT io port (default=0x3f0)"); -module_param(irq, int, 0); +module_param_hw(irq, int, irq, 0); MODULE_PARM_DESC(irq, "Eurotech WDT irq (default=10)"); module_param(ev, charp, 0); MODULE_PARM_DESC(ev, "Eurotech WDT event type (default is `int')"); diff --git a/drivers/watchdog/pc87413_wdt.c b/drivers/watchdog/pc87413_wdt.c index 9f15dd9435d1..06a892e36a8d 100644 --- a/drivers/watchdog/pc87413_wdt.c +++ b/drivers/watchdog/pc87413_wdt.c @@ -579,7 +579,7 @@ MODULE_AUTHOR("Marcus Junker <junker@anduras.de>"); MODULE_DESCRIPTION("PC87413 WDT driver"); MODULE_LICENSE("GPL"); -module_param(io, int, 0); +module_param_hw(io, int, ioport, 0); MODULE_PARM_DESC(io, MODNAME " I/O port (default: " __MODULE_STRING(IO_DEFAULT) ")."); diff --git a/drivers/watchdog/sc1200wdt.c b/drivers/watchdog/sc1200wdt.c index 131193a7acdf..b34d3d5ba632 100644 --- a/drivers/watchdog/sc1200wdt.c +++ b/drivers/watchdog/sc1200wdt.c @@ -88,7 +88,7 @@ MODULE_PARM_DESC(isapnp, "When set to 0 driver ISA PnP support will be disabled"); #endif -module_param(io, int, 0); +module_param_hw(io, int, ioport, 0); MODULE_PARM_DESC(io, "io port"); module_param(timeout, int, 0); MODULE_PARM_DESC(timeout, "range is 0-255 minutes, default is 1"); diff --git a/drivers/watchdog/wdt.c b/drivers/watchdog/wdt.c index e0206b5b7d89..e481fbbc4ae7 100644 --- a/drivers/watchdog/wdt.c +++ b/drivers/watchdog/wdt.c @@ -78,9 +78,9 @@ static int irq = 11; static DEFINE_SPINLOCK(wdt_lock); -module_param(io, int, 0); +module_param_hw(io, int, ioport, 0); MODULE_PARM_DESC(io, "WDT io port (default=0x240)"); -module_param(irq, int, 0); +module_param_hw(irq, int, irq, 0); MODULE_PARM_DESC(irq, "WDT irq (default=11)"); /* Support for the Fan Tachometer on the WDT501-P */ diff --git a/fs/pstore/ram.c b/fs/pstore/ram.c index 5523df7f17ef..5cb022c8cd33 100644 --- a/fs/pstore/ram.c +++ b/fs/pstore/ram.c @@ -58,7 +58,7 @@ module_param_named(pmsg_size, ramoops_pmsg_size, ulong, 0400); MODULE_PARM_DESC(pmsg_size, "size of user space message log"); static unsigned long long mem_address; -module_param(mem_address, ullong, 0400); +module_param_hw(mem_address, ullong, other, 0400); MODULE_PARM_DESC(mem_address, "start of reserved RAM used to store oops/panic logs"); diff --git a/include/linux/moduleparam.h b/include/linux/moduleparam.h index 52666d90ca94..6be1949ebcdf 100644 --- a/include/linux/moduleparam.h +++ b/include/linux/moduleparam.h @@ -60,9 +60,11 @@ struct kernel_param_ops { * Flags available for kernel_param * * UNSAFE - the parameter is dangerous and setting it will taint the kernel + * HWPARAM - Hardware param not permitted in lockdown mode */ enum { - KERNEL_PARAM_FL_UNSAFE = (1 << 0) + KERNEL_PARAM_FL_UNSAFE = (1 << 0), + KERNEL_PARAM_FL_HWPARAM = (1 << 1), }; struct kernel_param { @@ -451,6 +453,67 @@ extern int param_set_bint(const char *val, const struct kernel_param *kp); perm, -1, 0); \ __MODULE_PARM_TYPE(name, "array of " #type) +enum hwparam_type { + hwparam_ioport, /* Module parameter configures an I/O port */ + hwparam_iomem, /* Module parameter configures an I/O mem address */ + hwparam_ioport_or_iomem, /* Module parameter could be either, depending on other option */ + hwparam_irq, /* Module parameter configures an I/O port */ + hwparam_dma, /* Module parameter configures a DMA channel */ + hwparam_dma_addr, /* Module parameter configures a DMA buffer address */ + hwparam_other, /* Module parameter configures some other value */ +}; + +/** + * module_param_hw_named - A parameter representing a hw parameters + * @name: a valid C identifier which is the parameter name. + * @value: the actual lvalue to alter. + * @type: the type of the parameter + * @hwtype: what the value represents (enum hwparam_type) + * @perm: visibility in sysfs. + * + * Usually it's a good idea to have variable names and user-exposed names the + * same, but that's harder if the variable must be non-static or is inside a + * structure. This allows exposure under a different name. + */ +#define module_param_hw_named(name, value, type, hwtype, perm) \ + param_check_##type(name, &(value)); \ + __module_param_call(MODULE_PARAM_PREFIX, name, \ + ¶m_ops_##type, &value, \ + perm, -1, \ + KERNEL_PARAM_FL_HWPARAM | (hwparam_##hwtype & 0)); \ + __MODULE_PARM_TYPE(name, #type) + +#define module_param_hw(name, type, hwtype, perm) \ + module_param_hw_named(name, name, type, hwtype, perm) + +/** + * module_param_hw_array - A parameter representing an array of hw parameters + * @name: the name of the array variable + * @type: the type, as per module_param() + * @hwtype: what the value represents (enum hwparam_type) + * @nump: optional pointer filled in with the number written + * @perm: visibility in sysfs + * + * Input and output are as comma-separated values. Commas inside values + * don't work properly (eg. an array of charp). + * + * ARRAY_SIZE(@name) is used to determine the number of elements in the + * array, so the definition must be visible. + */ +#define module_param_hw_array(name, type, hwtype, nump, perm) \ + param_check_##type(name, &(name)[0]); \ + static const struct kparam_array __param_arr_##name \ + = { .max = ARRAY_SIZE(name), .num = nump, \ + .ops = ¶m_ops_##type, \ + .elemsize = sizeof(name[0]), .elem = name }; \ + __module_param_call(MODULE_PARAM_PREFIX, name, \ + ¶m_array_ops, \ + .arr = &__param_arr_##name, \ + perm, -1, \ + KERNEL_PARAM_FL_HWPARAM | (hwparam_##hwtype & 0)); \ + __MODULE_PARM_TYPE(name, "array of " #type) + + extern const struct kernel_param_ops param_array_ops; extern const struct kernel_param_ops param_ops_string; diff --git a/sound/drivers/mpu401/mpu401.c b/sound/drivers/mpu401/mpu401.c index fed7e7e2177b..9b86e00d7d95 100644 --- a/sound/drivers/mpu401/mpu401.c +++ b/sound/drivers/mpu401/mpu401.c @@ -53,9 +53,9 @@ MODULE_PARM_DESC(enable, "Enable MPU-401 device."); module_param_array(pnp, bool, NULL, 0444); MODULE_PARM_DESC(pnp, "PnP detection for MPU-401 device."); #endif -module_param_array(port, long, NULL, 0444); +module_param_hw_array(port, long, ioport, NULL, 0444); MODULE_PARM_DESC(port, "Port # for MPU-401 device."); -module_param_array(irq, int, NULL, 0444); +module_param_hw_array(irq, int, irq, NULL, 0444); MODULE_PARM_DESC(irq, "IRQ # for MPU-401 device."); module_param_array(uart_enter, bool, NULL, 0444); MODULE_PARM_DESC(uart_enter, "Issue UART_ENTER command at open."); diff --git a/sound/drivers/mtpav.c b/sound/drivers/mtpav.c index 00b31f92c504..0f6392001e30 100644 --- a/sound/drivers/mtpav.c +++ b/sound/drivers/mtpav.c @@ -86,9 +86,9 @@ module_param(index, int, 0444); MODULE_PARM_DESC(index, "Index value for MotuMTPAV MIDI."); module_param(id, charp, 0444); MODULE_PARM_DESC(id, "ID string for MotuMTPAV MIDI."); -module_param(port, long, 0444); +module_param_hw(port, long, ioport, 0444); MODULE_PARM_DESC(port, "Parallel port # for MotuMTPAV MIDI."); -module_param(irq, int, 0444); +module_param_hw(irq, int, irq, 0444); MODULE_PARM_DESC(irq, "Parallel IRQ # for MotuMTPAV MIDI."); module_param(hwports, int, 0444); MODULE_PARM_DESC(hwports, "Hardware ports # for MotuMTPAV MIDI."); diff --git a/sound/drivers/serial-u16550.c b/sound/drivers/serial-u16550.c index 60d51ac4ccfe..88e66ea0306d 100644 --- a/sound/drivers/serial-u16550.c +++ b/sound/drivers/serial-u16550.c @@ -84,9 +84,9 @@ module_param_array(id, charp, NULL, 0444); MODULE_PARM_DESC(id, "ID string for Serial MIDI."); module_param_array(enable, bool, NULL, 0444); MODULE_PARM_DESC(enable, "Enable UART16550A chip."); -module_param_array(port, long, NULL, 0444); +module_param_hw_array(port, long, ioport, NULL, 0444); MODULE_PARM_DESC(port, "Port # for UART16550A chip."); -module_param_array(irq, int, NULL, 0444); +module_param_hw_array(irq, int, irq, NULL, 0444); MODULE_PARM_DESC(irq, "IRQ # for UART16550A chip."); module_param_array(speed, int, NULL, 0444); MODULE_PARM_DESC(speed, "Speed in bauds."); diff --git a/sound/isa/ad1848/ad1848.c b/sound/isa/ad1848/ad1848.c index a302d1f8d14f..e739b1c85c25 100644 --- a/sound/isa/ad1848/ad1848.c +++ b/sound/isa/ad1848/ad1848.c @@ -55,11 +55,11 @@ module_param_array(id, charp, NULL, 0444); MODULE_PARM_DESC(id, "ID string for " CRD_NAME " soundcard."); module_param_array(enable, bool, NULL, 0444); MODULE_PARM_DESC(enable, "Enable " CRD_NAME " soundcard."); -module_param_array(port, long, NULL, 0444); +module_param_hw_array(port, long, ioport, NULL, 0444); MODULE_PARM_DESC(port, "Port # for " CRD_NAME " driver."); -module_param_array(irq, int, NULL, 0444); +module_param_hw_array(irq, int, irq, NULL, 0444); MODULE_PARM_DESC(irq, "IRQ # for " CRD_NAME " driver."); -module_param_array(dma1, int, NULL, 0444); +module_param_hw_array(dma1, int, dma, NULL, 0444); MODULE_PARM_DESC(dma1, "DMA1 # for " CRD_NAME " driver."); module_param_array(thinkpad, bool, NULL, 0444); MODULE_PARM_DESC(thinkpad, "Enable only for the onboard CS4248 of IBM Thinkpad 360/750/755 series."); diff --git a/sound/isa/adlib.c b/sound/isa/adlib.c index 8d3060fd7ad7..5fb619eca5c8 100644 --- a/sound/isa/adlib.c +++ b/sound/isa/adlib.c @@ -27,7 +27,7 @@ module_param_array(id, charp, NULL, 0444); MODULE_PARM_DESC(id, "ID string for " CRD_NAME " soundcard."); module_param_array(enable, bool, NULL, 0444); MODULE_PARM_DESC(enable, "Enable " CRD_NAME " soundcard."); -module_param_array(port, long, NULL, 0444); +module_param_hw_array(port, long, ioport, NULL, 0444); MODULE_PARM_DESC(port, "Port # for " CRD_NAME " driver."); static int snd_adlib_match(struct device *dev, unsigned int n) diff --git a/sound/isa/cmi8328.c b/sound/isa/cmi8328.c index 787475084f46..8e1756c3b9bb 100644 --- a/sound/isa/cmi8328.c +++ b/sound/isa/cmi8328.c @@ -51,18 +51,18 @@ MODULE_PARM_DESC(index, "Index value for CMI8328 soundcard."); module_param_array(id, charp, NULL, 0444); MODULE_PARM_DESC(id, "ID string for CMI8328 soundcard."); -module_param_array(port, long, NULL, 0444); +module_param_hw_array(port, long, ioport, NULL, 0444); MODULE_PARM_DESC(port, "Port # for CMI8328 driver."); -module_param_array(irq, int, NULL, 0444); +module_param_hw_array(irq, int, irq, NULL, 0444); MODULE_PARM_DESC(irq, "IRQ # for CMI8328 driver."); -module_param_array(dma1, int, NULL, 0444); +module_param_hw_array(dma1, int, dma, NULL, 0444); MODULE_PARM_DESC(dma1, "DMA1 for CMI8328 driver."); -module_param_array(dma2, int, NULL, 0444); +module_param_hw_array(dma2, int, dma, NULL, 0444); MODULE_PARM_DESC(dma2, "DMA2 for CMI8328 driver."); -module_param_array(mpuport, long, NULL, 0444); +module_param_hw_array(mpuport, long, ioport, NULL, 0444); MODULE_PARM_DESC(mpuport, "MPU-401 port # for CMI8328 driver."); -module_param_array(mpuirq, int, NULL, 0444); +module_param_hw_array(mpuirq, int, irq, NULL, 0444); MODULE_PARM_DESC(mpuirq, "IRQ # for CMI8328 MPU-401 port."); #ifdef SUPPORT_JOYSTICK module_param_array(gameport, bool, NULL, 0444); diff --git a/sound/isa/cmi8330.c b/sound/isa/cmi8330.c index dfedfd85f205..f64b29ab5cc7 100644 --- a/sound/isa/cmi8330.c +++ b/sound/isa/cmi8330.c @@ -95,27 +95,27 @@ module_param_array(isapnp, bool, NULL, 0444); MODULE_PARM_DESC(isapnp, "PnP detection for specified soundcard."); #endif -module_param_array(sbport, long, NULL, 0444); +module_param_hw_array(sbport, long, ioport, NULL, 0444); MODULE_PARM_DESC(sbport, "Port # for CMI8330/CMI8329 SB driver."); -module_param_array(sbirq, int, NULL, 0444); +module_param_hw_array(sbirq, int, irq, NULL, 0444); MODULE_PARM_DESC(sbirq, "IRQ # for CMI8330/CMI8329 SB driver."); -module_param_array(sbdma8, int, NULL, 0444); +module_param_hw_array(sbdma8, int, dma, NULL, 0444); MODULE_PARM_DESC(sbdma8, "DMA8 for CMI8330/CMI8329 SB driver."); -module_param_array(sbdma16, int, NULL, 0444); +module_param_hw_array(sbdma16, int, dma, NULL, 0444); MODULE_PARM_DESC(sbdma16, "DMA16 for CMI8330/CMI8329 SB driver."); -module_param_array(wssport, long, NULL, 0444); +module_param_hw_array(wssport, long, ioport, NULL, 0444); MODULE_PARM_DESC(wssport, "Port # for CMI8330/CMI8329 WSS driver."); -module_param_array(wssirq, int, NULL, 0444); +module_param_hw_array(wssirq, int, irq, NULL, 0444); MODULE_PARM_DESC(wssirq, "IRQ # for CMI8330/CMI8329 WSS driver."); -module_param_array(wssdma, int, NULL, 0444); +module_param_hw_array(wssdma, int, dma, NULL, 0444); MODULE_PARM_DESC(wssdma, "DMA for CMI8330/CMI8329 WSS driver."); -module_param_array(fmport, long, NULL, 0444); +module_param_hw_array(fmport, long, ioport, NULL, 0444); MODULE_PARM_DESC(fmport, "FM port # for CMI8330/CMI8329 driver."); -module_param_array(mpuport, long, NULL, 0444); +module_param_hw_array(mpuport, long, ioport, NULL, 0444); MODULE_PARM_DESC(mpuport, "MPU-401 port # for CMI8330/CMI8329 driver."); -module_param_array(mpuirq, int, NULL, 0444); +module_param_hw_array(mpuirq, int, irq, NULL, 0444); MODULE_PARM_DESC(mpuirq, "IRQ # for CMI8330/CMI8329 MPU-401 port."); #ifdef CONFIG_PNP static int isa_registered; diff --git a/sound/isa/cs423x/cs4231.c b/sound/isa/cs423x/cs4231.c index ef7448e9f813..e8edd9017a2f 100644 --- a/sound/isa/cs423x/cs4231.c +++ b/sound/isa/cs423x/cs4231.c @@ -55,17 +55,17 @@ module_param_array(id, charp, NULL, 0444); MODULE_PARM_DESC(id, "ID string for " CRD_NAME " soundcard."); module_param_array(enable, bool, NULL, 0444); MODULE_PARM_DESC(enable, "Enable " CRD_NAME " soundcard."); -module_param_array(port, long, NULL, 0444); +module_param_hw_array(port, long, ioport, NULL, 0444); MODULE_PARM_DESC(port, "Port # for " CRD_NAME " driver."); -module_param_array(mpu_port, long, NULL, 0444); +module_param_hw_array(mpu_port, long, ioport, NULL, 0444); MODULE_PARM_DESC(mpu_port, "MPU-401 port # for " CRD_NAME " driver."); -module_param_array(irq, int, NULL, 0444); +module_param_hw_array(irq, int, irq, NULL, 0444); MODULE_PARM_DESC(irq, "IRQ # for " CRD_NAME " driver."); -module_param_array(mpu_irq, int, NULL, 0444); +module_param_hw_array(mpu_irq, int, irq, NULL, 0444); MODULE_PARM_DESC(mpu_irq, "MPU-401 IRQ # for " CRD_NAME " driver."); -module_param_array(dma1, int, NULL, 0444); +module_param_hw_array(dma1, int, dma, NULL, 0444); MODULE_PARM_DESC(dma1, "DMA1 # for " CRD_NAME " driver."); -module_param_array(dma2, int, NULL, 0444); +module_param_hw_array(dma2, int, dma, NULL, 0444); MODULE_PARM_DESC(dma2, "DMA2 # for " CRD_NAME " driver."); static int snd_cs4231_match(struct device *dev, unsigned int n) diff --git a/sound/isa/cs423x/cs4236.c b/sound/isa/cs423x/cs4236.c index 9d7582c90a95..1f9a3b2be7a1 100644 --- a/sound/isa/cs423x/cs4236.c +++ b/sound/isa/cs423x/cs4236.c @@ -98,23 +98,23 @@ MODULE_PARM_DESC(enable, "Enable " IDENT " soundcard."); module_param_array(isapnp, bool, NULL, 0444); MODULE_PARM_DESC(isapnp, "ISA PnP detection for specified soundcard."); #endif -module_param_array(port, long, NULL, 0444); +module_param_hw_array(port, long, ioport, NULL, 0444); MODULE_PARM_DESC(port, "Port # for " IDENT " driver."); -module_param_array(cport, long, NULL, 0444); +module_param_hw_array(cport, long, ioport, NULL, 0444); MODULE_PARM_DESC(cport, "Control port # for " IDENT " driver."); -module_param_array(mpu_port, long, NULL, 0444); +module_param_hw_array(mpu_port, long, ioport, NULL, 0444); MODULE_PARM_DESC(mpu_port, "MPU-401 port # for " IDENT " driver."); -module_param_array(fm_port, long, NULL, 0444); +module_param_hw_array(fm_port, long, ioport, NULL, 0444); MODULE_PARM_DESC(fm_port, "FM port # for " IDENT " driver."); -module_param_array(sb_port, long, NULL, 0444); +module_param_hw_array(sb_port, long, ioport, NULL, 0444); MODULE_PARM_DESC(sb_port, "SB port # for " IDENT " driver (optional)."); -module_param_array(irq, int, NULL, 0444); +module_param_hw_array(irq, int, irq, NULL, 0444); MODULE_PARM_DESC(irq, "IRQ # for " IDENT " driver."); -module_param_array(mpu_irq, int, NULL, 0444); +module_param_hw_array(mpu_irq, int, irq, NULL, 0444); MODULE_PARM_DESC(mpu_irq, "MPU-401 IRQ # for " IDENT " driver."); -module_param_array(dma1, int, NULL, 0444); +module_param_hw_array(dma1, int, dma, NULL, 0444); MODULE_PARM_DESC(dma1, "DMA1 # for " IDENT " driver."); -module_param_array(dma2, int, NULL, 0444); +module_param_hw_array(dma2, int, dma, NULL, 0444); MODULE_PARM_DESC(dma2, "DMA2 # for " IDENT " driver."); #ifdef CONFIG_PNP diff --git a/sound/isa/es1688/es1688.c b/sound/isa/es1688/es1688.c index 1901c2bb6c3b..36320e7f2789 100644 --- a/sound/isa/es1688/es1688.c +++ b/sound/isa/es1688/es1688.c @@ -71,17 +71,17 @@ module_param_array(isapnp, bool, NULL, 0444); MODULE_PARM_DESC(isapnp, "PnP detection for specified soundcard."); #endif MODULE_PARM_DESC(enable, "Enable " CRD_NAME " soundcard."); -module_param_array(port, long, NULL, 0444); +module_param_hw_array(port, long, ioport, NULL, 0444); MODULE_PARM_DESC(port, "Port # for " CRD_NAME " driver."); -module_param_array(mpu_port, long, NULL, 0444); +module_param_hw_array(mpu_port, long, ioport, NULL, 0444); MODULE_PARM_DESC(mpu_port, "MPU-401 port # for " CRD_NAME " driver."); -module_param_array(irq, int, NULL, 0444); -module_param_array(fm_port, long, NULL, 0444); +module_param_hw_array(irq, int, irq, NULL, 0444); +module_param_hw_array(fm_port, long, ioport, NULL, 0444); MODULE_PARM_DESC(fm_port, "FM port # for ES1688 driver."); MODULE_PARM_DESC(irq, "IRQ # for " CRD_NAME " driver."); -module_param_array(mpu_irq, int, NULL, 0444); +module_param_hw_array(mpu_irq, int, irq, NULL, 0444); MODULE_PARM_DESC(mpu_irq, "MPU-401 IRQ # for " CRD_NAME " driver."); -module_param_array(dma8, int, NULL, 0444); +module_param_hw_array(dma8, int, dma, NULL, 0444); MODULE_PARM_DESC(dma8, "8-bit DMA # for " CRD_NAME " driver."); #ifdef CONFIG_PNP diff --git a/sound/isa/es18xx.c b/sound/isa/es18xx.c index 5094b62d8f77..0cabe2b8974f 100644 --- a/sound/isa/es18xx.c +++ b/sound/isa/es18xx.c @@ -1999,17 +1999,17 @@ MODULE_PARM_DESC(enable, "Enable ES18xx soundcard."); module_param_array(isapnp, bool, NULL, 0444); MODULE_PARM_DESC(isapnp, "PnP detection for specified soundcard."); #endif -module_param_array(port, long, NULL, 0444); +module_param_hw_array(port, long, ioport, NULL, 0444); MODULE_PARM_DESC(port, "Port # for ES18xx driver."); -module_param_array(mpu_port, long, NULL, 0444); +module_param_hw_array(mpu_port, long, ioport, NULL, 0444); MODULE_PARM_DESC(mpu_port, "MPU-401 port # for ES18xx driver."); -module_param_array(fm_port, long, NULL, 0444); +module_param_hw_array(fm_port, long, ioport, NULL, 0444); MODULE_PARM_DESC(fm_port, "FM port # for ES18xx driver."); -module_param_array(irq, int, NULL, 0444); +module_param_hw_array(irq, int, irq, NULL, 0444); MODULE_PARM_DESC(irq, "IRQ # for ES18xx driver."); -module_param_array(dma1, int, NULL, 0444); +module_param_hw_array(dma1, int, dma, NULL, 0444); MODULE_PARM_DESC(dma1, "DMA 1 # for ES18xx driver."); -module_param_array(dma2, int, NULL, 0444); +module_param_hw_array(dma2, int, dma, NULL, 0444); MODULE_PARM_DESC(dma2, "DMA 2 # for ES18xx driver."); #ifdef CONFIG_PNP diff --git a/sound/isa/galaxy/galaxy.c b/sound/isa/galaxy/galaxy.c index 379abe2cbeb2..b9994cc9f5fb 100644 --- a/sound/isa/galaxy/galaxy.c +++ b/sound/isa/galaxy/galaxy.c @@ -53,21 +53,21 @@ static int mpu_irq[SNDRV_CARDS] = SNDRV_DEFAULT_IRQ; static int dma1[SNDRV_CARDS] = SNDRV_DEFAULT_DMA; static int dma2[SNDRV_CARDS] = SNDRV_DEFAULT_DMA; -module_param_array(port, long, NULL, 0444); +module_param_hw_array(port, long, ioport, NULL, 0444); MODULE_PARM_DESC(port, "Port # for " CRD_NAME " driver."); -module_param_array(wss_port, long, NULL, 0444); +module_param_hw_array(wss_port, long, ioport, NULL, 0444); MODULE_PARM_DESC(wss_port, "WSS port # for " CRD_NAME " driver."); -module_param_array(mpu_port, long, NULL, 0444); +module_param_hw_array(mpu_port, long, ioport, NULL, 0444); MODULE_PARM_DESC(mpu_port, "MPU-401 port # for " CRD_NAME " driver."); -module_param_array(fm_port, long, NULL, 0444); +module_param_hw_array(fm_port, long, ioport, NULL, 0444); MODULE_PARM_DESC(fm_port, "FM port # for " CRD_NAME " driver."); -module_param_array(irq, int, NULL, 0444); +module_param_hw_array(irq, int, irq, NULL, 0444); MODULE_PARM_DESC(irq, "IRQ # for " CRD_NAME " driver."); -module_param_array(mpu_irq, int, NULL, 0444); +module_param_hw_array(mpu_irq, int, irq, NULL, 0444); MODULE_PARM_DESC(mpu_irq, "MPU-401 IRQ # for " CRD_NAME " driver."); -module_param_array(dma1, int, NULL, 0444); +module_param_hw_array(dma1, int, dma, NULL, 0444); MODULE_PARM_DESC(dma1, "Playback DMA # for " CRD_NAME " driver."); -module_param_array(dma2, int, NULL, 0444); +module_param_hw_array(dma2, int, dma, NULL, 0444); MODULE_PARM_DESC(dma2, "Capture DMA # for " CRD_NAME " driver."); /* diff --git a/sound/isa/gus/gusclassic.c b/sound/isa/gus/gusclassic.c index c169be49ed71..92a997ab1229 100644 --- a/sound/isa/gus/gusclassic.c +++ b/sound/isa/gus/gusclassic.c @@ -58,13 +58,13 @@ module_param_array(id, charp, NULL, 0444); MODULE_PARM_DESC(id, "ID string for " CRD_NAME " soundcard."); module_param_array(enable, bool, NULL, 0444); MODULE_PARM_DESC(enable, "Enable " CRD_NAME " soundcard."); -module_param_array(port, long, NULL, 0444); +module_param_hw_array(port, long, ioport, NULL, 0444); MODULE_PARM_DESC(port, "Port # for " CRD_NAME " driver."); -module_param_array(irq, int, NULL, 0444); +module_param_hw_array(irq, int, irq, NULL, 0444); MODULE_PARM_DESC(irq, "IRQ # for " CRD_NAME " driver."); -module_param_array(dma1, int, NULL, 0444); +module_param_hw_array(dma1, int, dma, NULL, 0444); MODULE_PARM_DESC(dma1, "DMA1 # for " CRD_NAME " driver."); -module_param_array(dma2, int, NULL, 0444); +module_param_hw_array(dma2, int, dma, NULL, 0444); MODULE_PARM_DESC(dma2, "DMA2 # for " CRD_NAME " driver."); module_param_array(joystick_dac, int, NULL, 0444); MODULE_PARM_DESC(joystick_dac, "Joystick DAC level 0.59V-4.52V or 0.389V-2.98V for " CRD_NAME " driver."); diff --git a/sound/isa/gus/gusextreme.c b/sound/isa/gus/gusextreme.c index 77ac2fd723b4..beb52c0f70ea 100644 --- a/sound/isa/gus/gusextreme.c +++ b/sound/isa/gus/gusextreme.c @@ -66,21 +66,21 @@ module_param_array(id, charp, NULL, 0444); MODULE_PARM_DESC(id, "ID string for " CRD_NAME " soundcard."); module_param_array(enable, bool, NULL, 0444); MODULE_PARM_DESC(enable, "Enable " CRD_NAME " soundcard."); -module_param_array(port, long, NULL, 0444); +module_param_hw_array(port, long, ioport, NULL, 0444); MODULE_PARM_DESC(port, "Port # for " CRD_NAME " driver."); -module_param_array(gf1_port, long, NULL, 0444); +module_param_hw_array(gf1_port, long, ioport, NULL, 0444); MODULE_PARM_DESC(gf1_port, "GF1 port # for " CRD_NAME " driver (optional)."); -module_param_array(mpu_port, long, NULL, 0444); +module_param_hw_array(mpu_port, long, ioport, NULL, 0444); MODULE_PARM_DESC(mpu_port, "MPU-401 port # for " CRD_NAME " driver."); -module_param_array(irq, int, NULL, 0444); +module_param_hw_array(irq, int, irq, NULL, 0444); MODULE_PARM_DESC(irq, "IRQ # for " CRD_NAME " driver."); -module_param_array(mpu_irq, int, NULL, 0444); +module_param_hw_array(mpu_irq, int, irq, NULL, 0444); MODULE_PARM_DESC(mpu_irq, "MPU-401 IRQ # for " CRD_NAME " driver."); -module_param_array(gf1_irq, int, NULL, 0444); +module_param_hw_array(gf1_irq, int, irq, NULL, 0444); MODULE_PARM_DESC(gf1_irq, "GF1 IRQ # for " CRD_NAME " driver."); -module_param_array(dma8, int, NULL, 0444); +module_param_hw_array(dma8, int, dma, NULL, 0444); MODULE_PARM_DESC(dma8, "8-bit DMA # for " CRD_NAME " driver."); -module_param_array(dma1, int, NULL, 0444); +module_param_hw_array(dma1, int, dma, NULL, 0444); MODULE_PARM_DESC(dma1, "GF1 DMA # for " CRD_NAME " driver."); module_param_array(joystick_dac, int, NULL, 0444); MODULE_PARM_DESC(joystick_dac, "Joystick DAC level 0.59V-4.52V or 0.389V-2.98V for " CRD_NAME " driver."); diff --git a/sound/isa/gus/gusmax.c b/sound/isa/gus/gusmax.c index dd88c9d33492..63309a453140 100644 --- a/sound/isa/gus/gusmax.c +++ b/sound/isa/gus/gusmax.c @@ -56,13 +56,13 @@ module_param_array(id, charp, NULL, 0444); MODULE_PARM_DESC(id, "ID string for GUS MAX soundcard."); module_param_array(enable, bool, NULL, 0444); MODULE_PARM_DESC(enable, "Enable GUS MAX soundcard."); -module_param_array(port, long, NULL, 0444); +module_param_hw_array(port, long, ioport, NULL, 0444); MODULE_PARM_DESC(port, "Port # for GUS MAX driver."); -module_param_array(irq, int, NULL, 0444); +module_param_hw_array(irq, int, irq, NULL, 0444); MODULE_PARM_DESC(irq, "IRQ # for GUS MAX driver."); -module_param_array(dma1, int, NULL, 0444); +module_param_hw_array(dma1, int, dma, NULL, 0444); MODULE_PARM_DESC(dma1, "DMA1 # for GUS MAX driver."); -module_param_array(dma2, int, NULL, 0444); +module_param_hw_array(dma2, int, dma, NULL, 0444); MODULE_PARM_DESC(dma2, "DMA2 # for GUS MAX driver."); module_param_array(joystick_dac, int, NULL, 0444); MODULE_PARM_DESC(joystick_dac, "Joystick DAC level 0.59V-4.52V or 0.389V-2.98V for GUS MAX driver."); diff --git a/sound/isa/gus/interwave.c b/sound/isa/gus/interwave.c index 70d0040484c8..0687b7ef3e53 100644 --- a/sound/isa/gus/interwave.c +++ b/sound/isa/gus/interwave.c @@ -92,17 +92,17 @@ MODULE_PARM_DESC(enable, "Enable InterWave soundcard."); module_param_array(isapnp, bool, NULL, 0444); MODULE_PARM_DESC(isapnp, "ISA PnP detection for specified soundcard."); #endif -module_param_array(port, long, NULL, 0444); +module_param_hw_array(port, long, ioport, NULL, 0444); MODULE_PARM_DESC(port, "Port # for InterWave driver."); #ifdef SNDRV_STB -module_param_array(port_tc, long, NULL, 0444); +module_param_hw_array(port_tc, long, ioport, NULL, 0444); MODULE_PARM_DESC(port_tc, "Tone control (TEA6330T - i2c bus) port # for InterWave driver."); #endif -module_param_array(irq, int, NULL, 0444); +module_param_hw_array(irq, int, irq, NULL, 0444); MODULE_PARM_DESC(irq, "IRQ # for InterWave driver."); -module_param_array(dma1, int, NULL, 0444); +module_param_hw_array(dma1, int, dma, NULL, 0444); MODULE_PARM_DESC(dma1, "DMA1 # for InterWave driver."); -module_param_array(dma2, int, NULL, 0444); +module_param_hw_array(dma2, int, dma, NULL, 0444); MODULE_PARM_DESC(dma2, "DMA2 # for InterWave driver."); module_param_array(joystick_dac, int, NULL, 0444); MODULE_PARM_DESC(joystick_dac, "Joystick DAC level 0.59V-4.52V or 0.389V-2.98V for InterWave driver."); diff --git a/sound/isa/msnd/msnd_pinnacle.c b/sound/isa/msnd/msnd_pinnacle.c index 4c072666115d..ad4897337df5 100644 --- a/sound/isa/msnd/msnd_pinnacle.c +++ b/sound/isa/msnd/msnd_pinnacle.c @@ -800,22 +800,22 @@ MODULE_LICENSE("GPL"); MODULE_FIRMWARE(INITCODEFILE); MODULE_FIRMWARE(PERMCODEFILE); -module_param_array(io, long, NULL, S_IRUGO); +module_param_hw_array(io, long, ioport, NULL, S_IRUGO); MODULE_PARM_DESC(io, "IO port #"); -module_param_array(irq, int, NULL, S_IRUGO); -module_param_array(mem, long, NULL, S_IRUGO); +module_param_hw_array(irq, int, irq, NULL, S_IRUGO); +module_param_hw_array(mem, long, iomem, NULL, S_IRUGO); module_param_array(write_ndelay, int, NULL, S_IRUGO); module_param(calibrate_signal, int, S_IRUGO); #ifndef MSND_CLASSIC module_param_array(digital, int, NULL, S_IRUGO); -module_param_array(cfg, long, NULL, S_IRUGO); +module_param_hw_array(cfg, long, ioport, NULL, S_IRUGO); module_param_array(reset, int, 0, S_IRUGO); -module_param_array(mpu_io, long, NULL, S_IRUGO); -module_param_array(mpu_irq, int, NULL, S_IRUGO); -module_param_array(ide_io0, long, NULL, S_IRUGO); -module_param_array(ide_io1, long, NULL, S_IRUGO); -module_param_array(ide_irq, int, NULL, S_IRUGO); -module_param_array(joystick_io, long, NULL, S_IRUGO); +module_param_hw_array(mpu_io, long, ioport, NULL, S_IRUGO); +module_param_hw_array(mpu_irq, int, irq, NULL, S_IRUGO); +module_param_hw_array(ide_io0, long, ioport, NULL, S_IRUGO); +module_param_hw_array(ide_io1, long, ioport, NULL, S_IRUGO); +module_param_hw_array(ide_irq, int, irq, NULL, S_IRUGO); +module_param_hw_array(joystick_io, long, ioport, NULL, S_IRUGO); #endif diff --git a/sound/isa/opl3sa2.c b/sound/isa/opl3sa2.c index ae133633a420..4098e3e0353d 100644 --- a/sound/isa/opl3sa2.c +++ b/sound/isa/opl3sa2.c @@ -69,21 +69,21 @@ MODULE_PARM_DESC(enable, "Enable OPL3-SA soundcard."); module_param_array(isapnp, bool, NULL, 0444); MODULE_PARM_DESC(isapnp, "PnP detection for specified soundcard."); #endif -module_param_array(port, long, NULL, 0444); +module_param_hw_array(port, long, ioport, NULL, 0444); MODULE_PARM_DESC(port, "Port # for OPL3-SA driver."); -module_param_array(sb_port, long, NULL, 0444); +module_param_hw_array(sb_port, long, ioport, NULL, 0444); MODULE_PARM_DESC(sb_port, "SB port # for OPL3-SA driver."); -module_param_array(wss_port, long, NULL, 0444); +module_param_hw_array(wss_port, long, ioport, NULL, 0444); MODULE_PARM_DESC(wss_port, "WSS port # for OPL3-SA driver."); -module_param_array(fm_port, long, NULL, 0444); +module_param_hw_array(fm_port, long, ioport, NULL, 0444); MODULE_PARM_DESC(fm_port, "FM port # for OPL3-SA driver."); -module_param_array(midi_port, long, NULL, 0444); +module_param_hw_array(midi_port, long, ioport, NULL, 0444); MODULE_PARM_DESC(midi_port, "MIDI port # for OPL3-SA driver."); -module_param_array(irq, int, NULL, 0444); +module_param_hw_array(irq, int, irq, NULL, 0444); MODULE_PARM_DESC(irq, "IRQ # for OPL3-SA driver."); -module_param_array(dma1, int, NULL, 0444); +module_param_hw_array(dma1, int, dma, NULL, 0444); MODULE_PARM_DESC(dma1, "DMA1 # for OPL3-SA driver."); -module_param_array(dma2, int, NULL, 0444); +module_param_hw_array(dma2, int, dma, NULL, 0444); MODULE_PARM_DESC(dma2, "DMA2 # for OPL3-SA driver."); module_param_array(opl3sa3_ymode, int, NULL, 0444); MODULE_PARM_DESC(opl3sa3_ymode, "Speaker size selection for 3D Enhancement mode: Desktop/Large Notebook/Small Notebook/HiFi."); diff --git a/sound/isa/opti9xx/miro.c b/sound/isa/opti9xx/miro.c index 3a9067db1a84..bcbff56f060d 100644 --- a/sound/isa/opti9xx/miro.c +++ b/sound/isa/opti9xx/miro.c @@ -69,19 +69,19 @@ module_param(index, int, 0444); MODULE_PARM_DESC(index, "Index value for miro soundcard."); module_param(id, charp, 0444); MODULE_PARM_DESC(id, "ID string for miro soundcard."); -module_param(port, long, 0444); +module_param_hw(port, long, ioport, 0444); MODULE_PARM_DESC(port, "WSS port # for miro driver."); -module_param(mpu_port, long, 0444); +module_param_hw(mpu_port, long, ioport, 0444); MODULE_PARM_DESC(mpu_port, "MPU-401 port # for miro driver."); -module_param(fm_port, long, 0444); +module_param_hw(fm_port, long, ioport, 0444); MODULE_PARM_DESC(fm_port, "FM Port # for miro driver."); -module_param(irq, int, 0444); +module_param_hw(irq, int, irq, 0444); MODULE_PARM_DESC(irq, "WSS irq # for miro driver."); -module_param(mpu_irq, int, 0444); +module_param_hw(mpu_irq, int, irq, 0444); MODULE_PARM_DESC(mpu_irq, "MPU-401 irq # for miro driver."); -module_param(dma1, int, 0444); +module_param_hw(dma1, int, dma, 0444); MODULE_PARM_DESC(dma1, "1st dma # for miro driver."); -module_param(dma2, int, 0444); +module_param_hw(dma2, int, dma, 0444); MODULE_PARM_DESC(dma2, "2nd dma # for miro driver."); module_param(wss, int, 0444); MODULE_PARM_DESC(wss, "wss mode"); diff --git a/sound/isa/opti9xx/opti92x-ad1848.c b/sound/isa/opti9xx/opti92x-ad1848.c index 0a5266003786..ceddb392b1e3 100644 --- a/sound/isa/opti9xx/opti92x-ad1848.c +++ b/sound/isa/opti9xx/opti92x-ad1848.c @@ -88,20 +88,20 @@ MODULE_PARM_DESC(id, "ID string for opti9xx based soundcard."); module_param(isapnp, bool, 0444); MODULE_PARM_DESC(isapnp, "Enable ISA PnP detection for specified soundcard."); #endif -module_param(port, long, 0444); +module_param_hw(port, long, ioport, 0444); MODULE_PARM_DESC(port, "WSS port # for opti9xx driver."); -module_param(mpu_port, long, 0444); +module_param_hw(mpu_port, long, ioport, 0444); MODULE_PARM_DESC(mpu_port, "MPU-401 port # for opti9xx driver."); -module_param(fm_port, long, 0444); +module_param_hw(fm_port, long, ioport, 0444); MODULE_PARM_DESC(fm_port, "FM port # for opti9xx driver."); -module_param(irq, int, 0444); +module_param_hw(irq, int, irq, 0444); MODULE_PARM_DESC(irq, "WSS irq # for opti9xx driver."); -module_param(mpu_irq, int, 0444); +module_param_hw(mpu_irq, int, irq, 0444); MODULE_PARM_DESC(mpu_irq, "MPU-401 irq # for opti9xx driver."); -module_param(dma1, int, 0444); +module_param_hw(dma1, int, dma, 0444); MODULE_PARM_DESC(dma1, "1st dma # for opti9xx driver."); #if defined(CS4231) || defined(OPTi93X) -module_param(dma2, int, 0444); +module_param_hw(dma2, int, dma, 0444); MODULE_PARM_DESC(dma2, "2nd dma # for opti9xx driver."); #endif /* CS4231 || OPTi93X */ diff --git a/sound/isa/sb/jazz16.c b/sound/isa/sb/jazz16.c index 4d909971eedb..bfa0055e1fd6 100644 --- a/sound/isa/sb/jazz16.c +++ b/sound/isa/sb/jazz16.c @@ -50,17 +50,17 @@ module_param_array(id, charp, NULL, 0444); MODULE_PARM_DESC(id, "ID string for Media Vision Jazz16 based soundcard."); module_param_array(enable, bool, NULL, 0444); MODULE_PARM_DESC(enable, "Enable Media Vision Jazz16 based soundcard."); -module_param_array(port, long, NULL, 0444); +module_param_hw_array(port, long, ioport, NULL, 0444); MODULE_PARM_DESC(port, "Port # for jazz16 driver."); -module_param_array(mpu_port, long, NULL, 0444); +module_param_hw_array(mpu_port, long, ioport, NULL, 0444); MODULE_PARM_DESC(mpu_port, "MPU-401 port # for jazz16 driver."); -module_param_array(irq, int, NULL, 0444); +module_param_hw_array(irq, int, irq, NULL, 0444); MODULE_PARM_DESC(irq, "IRQ # for jazz16 driver."); -module_param_array(mpu_irq, int, NULL, 0444); +module_param_hw_array(mpu_irq, int, irq, NULL, 0444); MODULE_PARM_DESC(mpu_irq, "MPU-401 IRQ # for jazz16 driver."); -module_param_array(dma8, int, NULL, 0444); +module_param_hw_array(dma8, int, dma, NULL, 0444); MODULE_PARM_DESC(dma8, "DMA8 # for jazz16 driver."); -module_param_array(dma16, int, NULL, 0444); +module_param_hw_array(dma16, int, dma, NULL, 0444); MODULE_PARM_DESC(dma16, "DMA16 # for jazz16 driver."); #define SB_JAZZ16_WAKEUP 0xaf diff --git a/sound/isa/sb/sb16.c b/sound/isa/sb/sb16.c index 4a7d7c89808f..3b2e4f405ff2 100644 --- a/sound/isa/sb/sb16.c +++ b/sound/isa/sb/sb16.c @@ -99,21 +99,21 @@ MODULE_PARM_DESC(enable, "Enable SoundBlaster 16 soundcard."); module_param_array(isapnp, bool, NULL, 0444); MODULE_PARM_DESC(isapnp, "PnP detection for specified soundcard."); #endif -module_param_array(port, long, NULL, 0444); +module_param_hw_array(port, long, ioport, NULL, 0444); MODULE_PARM_DESC(port, "Port # for SB16 driver."); -module_param_array(mpu_port, long, NULL, 0444); +module_param_hw_array(mpu_port, long, ioport, NULL, 0444); MODULE_PARM_DESC(mpu_port, "MPU-401 port # for SB16 driver."); -module_param_array(fm_port, long, NULL, 0444); +module_param_hw_array(fm_port, long, ioport, NULL, 0444); MODULE_PARM_DESC(fm_port, "FM port # for SB16 PnP driver."); #ifdef SNDRV_SBAWE_EMU8000 -module_param_array(awe_port, long, NULL, 0444); +module_param_hw_array(awe_port, long, ioport, NULL, 0444); MODULE_PARM_DESC(awe_port, "AWE port # for SB16 PnP driver."); #endif -module_param_array(irq, int, NULL, 0444); +module_param_hw_array(irq, int, irq, NULL, 0444); MODULE_PARM_DESC(irq, "IRQ # for SB16 driver."); -module_param_array(dma8, int, NULL, 0444); +module_param_hw_array(dma8, int, dma, NULL, 0444); MODULE_PARM_DESC(dma8, "8-bit DMA # for SB16 driver."); -module_param_array(dma16, int, NULL, 0444); +module_param_hw_array(dma16, int, dma, NULL, 0444); MODULE_PARM_DESC(dma16, "16-bit DMA # for SB16 driver."); module_param_array(mic_agc, int, NULL, 0444); MODULE_PARM_DESC(mic_agc, "Mic Auto-Gain-Control switch."); diff --git a/sound/isa/sb/sb8.c b/sound/isa/sb/sb8.c index ad42d2364199..d77dcba276b5 100644 --- a/sound/isa/sb/sb8.c +++ b/sound/isa/sb/sb8.c @@ -47,11 +47,11 @@ module_param_array(id, charp, NULL, 0444); MODULE_PARM_DESC(id, "ID string for Sound Blaster soundcard."); module_param_array(enable, bool, NULL, 0444); MODULE_PARM_DESC(enable, "Enable Sound Blaster soundcard."); -module_param_array(port, long, NULL, 0444); +module_param_hw_array(port, long, ioport, NULL, 0444); MODULE_PARM_DESC(port, "Port # for SB8 driver."); -module_param_array(irq, int, NULL, 0444); +module_param_hw_array(irq, int, irq, NULL, 0444); MODULE_PARM_DESC(irq, "IRQ # for SB8 driver."); -module_param_array(dma8, int, NULL, 0444); +module_param_hw_array(dma8, int, dma, NULL, 0444); MODULE_PARM_DESC(dma8, "8-bit DMA # for SB8 driver."); struct snd_sb8 { diff --git a/sound/isa/sc6000.c b/sound/isa/sc6000.c index b61a6633d8f2..c09d9b914efe 100644 --- a/sound/isa/sc6000.c +++ b/sound/isa/sc6000.c @@ -64,17 +64,17 @@ module_param_array(id, charp, NULL, 0444); MODULE_PARM_DESC(id, "ID string for sc-6000 based soundcard."); module_param_array(enable, bool, NULL, 0444); MODULE_PARM_DESC(enable, "Enable sc-6000 based soundcard."); -module_param_array(port, long, NULL, 0444); +module_param_hw_array(port, long, ioport, NULL, 0444); MODULE_PARM_DESC(port, "Port # for sc-6000 driver."); -module_param_array(mss_port, long, NULL, 0444); +module_param_hw_array(mss_port, long, ioport, NULL, 0444); MODULE_PARM_DESC(mss_port, "MSS Port # for sc-6000 driver."); -module_param_array(mpu_port, long, NULL, 0444); +module_param_hw_array(mpu_port, long, ioport, NULL, 0444); MODULE_PARM_DESC(mpu_port, "MPU-401 port # for sc-6000 driver."); -module_param_array(irq, int, NULL, 0444); +module_param_hw_array(irq, int, irq, NULL, 0444); MODULE_PARM_DESC(irq, "IRQ # for sc-6000 driver."); -module_param_array(mpu_irq, int, NULL, 0444); +module_param_hw_array(mpu_irq, int, irq, NULL, 0444); MODULE_PARM_DESC(mpu_irq, "MPU-401 IRQ # for sc-6000 driver."); -module_param_array(dma, int, NULL, 0444); +module_param_hw_array(dma, int, dma, NULL, 0444); MODULE_PARM_DESC(dma, "DMA # for sc-6000 driver."); module_param_array(joystick, bool, NULL, 0444); MODULE_PARM_DESC(joystick, "Enable gameport."); diff --git a/sound/isa/sscape.c b/sound/isa/sscape.c index fdcfa29e2205..54f5758a1bb3 100644 --- a/sound/isa/sscape.c +++ b/sound/isa/sscape.c @@ -63,22 +63,22 @@ MODULE_PARM_DESC(index, "Index number for SoundScape soundcard"); module_param_array(id, charp, NULL, 0444); MODULE_PARM_DESC(id, "Description for SoundScape card"); -module_param_array(port, long, NULL, 0444); +module_param_hw_array(port, long, ioport, NULL, 0444); MODULE_PARM_DESC(port, "Port # for SoundScape driver."); -module_param_array(wss_port, long, NULL, 0444); +module_param_hw_array(wss_port, long, ioport, NULL, 0444); MODULE_PARM_DESC(wss_port, "WSS Port # for SoundScape driver."); -module_param_array(irq, int, NULL, 0444); +module_param_hw_array(irq, int, irq, NULL, 0444); MODULE_PARM_DESC(irq, "IRQ # for SoundScape driver."); -module_param_array(mpu_irq, int, NULL, 0444); +module_param_hw_array(mpu_irq, int, irq, NULL, 0444); MODULE_PARM_DESC(mpu_irq, "MPU401 IRQ # for SoundScape driver."); -module_param_array(dma, int, NULL, 0444); +module_param_hw_array(dma, int, dma, NULL, 0444); MODULE_PARM_DESC(dma, "DMA # for SoundScape driver."); -module_param_array(dma2, int, NULL, 0444); +module_param_hw_array(dma2, int, dma, NULL, 0444); MODULE_PARM_DESC(dma2, "DMA2 # for SoundScape driver."); module_param_array(joystick, bool, NULL, 0444); diff --git a/sound/isa/wavefront/wavefront.c b/sound/isa/wavefront/wavefront.c index a0987a57c8a9..da4e9a85f0af 100644 --- a/sound/isa/wavefront/wavefront.c +++ b/sound/isa/wavefront/wavefront.c @@ -63,23 +63,23 @@ MODULE_PARM_DESC(enable, "Enable WaveFront soundcard."); module_param_array(isapnp, bool, NULL, 0444); MODULE_PARM_DESC(isapnp, "ISA PnP detection for WaveFront soundcards."); #endif -module_param_array(cs4232_pcm_port, long, NULL, 0444); +module_param_hw_array(cs4232_pcm_port, long, ioport, NULL, 0444); MODULE_PARM_DESC(cs4232_pcm_port, "Port # for CS4232 PCM interface."); -module_param_array(cs4232_pcm_irq, int, NULL, 0444); +module_param_hw_array(cs4232_pcm_irq, int, irq, NULL, 0444); MODULE_PARM_DESC(cs4232_pcm_irq, "IRQ # for CS4232 PCM interface."); -module_param_array(dma1, int, NULL, 0444); +module_param_hw_array(dma1, int, dma, NULL, 0444); MODULE_PARM_DESC(dma1, "DMA1 # for CS4232 PCM interface."); -module_param_array(dma2, int, NULL, 0444); +module_param_hw_array(dma2, int, dma, NULL, 0444); MODULE_PARM_DESC(dma2, "DMA2 # for CS4232 PCM interface."); -module_param_array(cs4232_mpu_port, long, NULL, 0444); +module_param_hw_array(cs4232_mpu_port, long, ioport, NULL, 0444); MODULE_PARM_DESC(cs4232_mpu_port, "port # for CS4232 MPU-401 interface."); -module_param_array(cs4232_mpu_irq, int, NULL, 0444); +module_param_hw_array(cs4232_mpu_irq, int, irq, NULL, 0444); MODULE_PARM_DESC(cs4232_mpu_irq, "IRQ # for CS4232 MPU-401 interface."); -module_param_array(ics2115_irq, int, NULL, 0444); +module_param_hw_array(ics2115_irq, int, irq, NULL, 0444); MODULE_PARM_DESC(ics2115_irq, "IRQ # for ICS2115."); -module_param_array(ics2115_port, long, NULL, 0444); +module_param_hw_array(ics2115_port, long, ioport, NULL, 0444); MODULE_PARM_DESC(ics2115_port, "Port # for ICS2115."); -module_param_array(fm_port, long, NULL, 0444); +module_param_hw_array(fm_port, long, ioport, NULL, 0444); MODULE_PARM_DESC(fm_port, "FM port #."); module_param_array(use_cs4232_midi, bool, NULL, 0444); MODULE_PARM_DESC(use_cs4232_midi, "Use CS4232 MPU-401 interface (inaccessibly located inside your computer)"); diff --git a/sound/oss/ad1848.c b/sound/oss/ad1848.c index f6156d8169d0..2421f59cf279 100644 --- a/sound/oss/ad1848.c +++ b/sound/oss/ad1848.c @@ -2805,10 +2805,10 @@ static int __initdata dma = -1; static int __initdata dma2 = -1; static int __initdata type = 0; -module_param(io, int, 0); /* I/O for a raw AD1848 card */ -module_param(irq, int, 0); /* IRQ to use */ -module_param(dma, int, 0); /* First DMA channel */ -module_param(dma2, int, 0); /* Second DMA channel */ +module_param_hw(io, int, ioport, 0); /* I/O for a raw AD1848 card */ +module_param_hw(irq, int, irq, 0); /* IRQ to use */ +module_param_hw(dma, int, dma, 0); /* First DMA channel */ +module_param_hw(dma2, int, dma, 0); /* Second DMA channel */ module_param(type, int, 0); /* Card type */ module_param(deskpro_xl, bool, 0); /* Special magic for Deskpro XL boxen */ module_param(deskpro_m, bool, 0); /* Special magic for Deskpro M box */ diff --git a/sound/oss/aedsp16.c b/sound/oss/aedsp16.c index bb477d5c8528..f058ed6bdb69 100644 --- a/sound/oss/aedsp16.c +++ b/sound/oss/aedsp16.c @@ -1303,17 +1303,17 @@ static int __initdata mpu_irq = -1; static int __initdata mss_base = -1; static int __initdata mpu_base = -1; -module_param(io, int, 0); +module_param_hw(io, int, ioport, 0); MODULE_PARM_DESC(io, "I/O base address (0x220 0x240)"); -module_param(irq, int, 0); +module_param_hw(irq, int, irq, 0); MODULE_PARM_DESC(irq, "IRQ line (5 7 9 10 11)"); -module_param(dma, int, 0); +module_param_hw(dma, int, dma, 0); MODULE_PARM_DESC(dma, "dma line (0 1 3)"); -module_param(mpu_irq, int, 0); +module_param_hw(mpu_irq, int, irq, 0); MODULE_PARM_DESC(mpu_irq, "MPU-401 IRQ line (5 7 9 10 0)"); -module_param(mss_base, int, 0); +module_param_hw(mss_base, int, ioport, 0); MODULE_PARM_DESC(mss_base, "MSS emulation I/O base address (0x530 0xE80)"); -module_param(mpu_base, int, 0); +module_param_hw(mpu_base, int, ioport, 0); MODULE_PARM_DESC(mpu_base,"MPU-401 I/O base address (0x300 0x310 0x320 0x330)"); MODULE_AUTHOR("Riccardo Facchetti <fizban@tin.it>"); MODULE_DESCRIPTION("Audio Excel DSP 16 Driver Version " VERSION); diff --git a/sound/oss/mpu401.c b/sound/oss/mpu401.c index 862735005b43..20e8fa46f647 100644 --- a/sound/oss/mpu401.c +++ b/sound/oss/mpu401.c @@ -1748,8 +1748,8 @@ static struct address_info cfg; static int io = -1; static int irq = -1; -module_param(irq, int, 0); -module_param(io, int, 0); +module_param_hw(irq, int, irq, 0); +module_param_hw(io, int, ioport, 0); static int __init init_mpu401(void) { diff --git a/sound/oss/msnd_pinnacle.c b/sound/oss/msnd_pinnacle.c index f34ec01d2239..d2abc2cf3213 100644 --- a/sound/oss/msnd_pinnacle.c +++ b/sound/oss/msnd_pinnacle.c @@ -1727,22 +1727,22 @@ static int calibrate_signal __initdata = CONFIG_MSND_CALSIGNAL; #endif /* MODULE */ -module_param (io, int, 0); -module_param (irq, int, 0); -module_param (mem, int, 0); +module_param_hw (io, int, ioport, 0); +module_param_hw (irq, int, irq, 0); +module_param_hw (mem, int, iomem, 0); module_param (write_ndelay, int, 0); module_param (fifosize, int, 0); module_param (calibrate_signal, int, 0); #ifndef MSND_CLASSIC module_param (digital, bool, 0); -module_param (cfg, int, 0); +module_param_hw (cfg, int, ioport, 0); module_param (reset, int, 0); -module_param (mpu_io, int, 0); -module_param (mpu_irq, int, 0); -module_param (ide_io0, int, 0); -module_param (ide_io1, int, 0); -module_param (ide_irq, int, 0); -module_param (joystick_io, int, 0); +module_param_hw (mpu_io, int, ioport, 0); +module_param_hw (mpu_irq, int, irq, 0); +module_param_hw (ide_io0, int, ioport, 0); +module_param_hw (ide_io1, int, ioport, 0); +module_param_hw (ide_irq, int, irq, 0); +module_param_hw (joystick_io, int, ioport, 0); #endif static int __init msnd_init(void) diff --git a/sound/oss/opl3.c b/sound/oss/opl3.c index b6d19adf8f41..f0f5b5be6314 100644 --- a/sound/oss/opl3.c +++ b/sound/oss/opl3.c @@ -1200,7 +1200,7 @@ static int me; static int io = -1; -module_param(io, int, 0); +module_param_hw(io, int, ioport, 0); static int __init init_opl3 (void) { diff --git a/sound/oss/pas2_card.c b/sound/oss/pas2_card.c index b07954a79536..769fca692d2a 100644 --- a/sound/oss/pas2_card.c +++ b/sound/oss/pas2_card.c @@ -383,15 +383,15 @@ static int __initdata sb_irq = -1; static int __initdata sb_dma = -1; static int __initdata sb_dma16 = -1; -module_param(io, int, 0); -module_param(irq, int, 0); -module_param(dma, int, 0); -module_param(dma16, int, 0); - -module_param(sb_io, int, 0); -module_param(sb_irq, int, 0); -module_param(sb_dma, int, 0); -module_param(sb_dma16, int, 0); +module_param_hw(io, int, ioport, 0); +module_param_hw(irq, int, irq, 0); +module_param_hw(dma, int, dma, 0); +module_param_hw(dma16, int, dma, 0); + +module_param_hw(sb_io, int, ioport, 0); +module_param_hw(sb_irq, int, irq, 0); +module_param_hw(sb_dma, int, dma, 0); +module_param_hw(sb_dma16, int, dma, 0); module_param(joystick, bool, 0); module_param(symphony, bool, 0); diff --git a/sound/oss/pss.c b/sound/oss/pss.c index 81314f9e2ccb..33c3a442e162 100644 --- a/sound/oss/pss.c +++ b/sound/oss/pss.c @@ -1139,19 +1139,19 @@ static bool pss_no_sound = 0; /* Just configure non-sound components */ static bool pss_keep_settings = 1; /* Keep hardware settings at module exit */ static char *pss_firmware = "/etc/sound/pss_synth"; -module_param(pss_io, int, 0); +module_param_hw(pss_io, int, ioport, 0); MODULE_PARM_DESC(pss_io, "Set i/o base of PSS card (probably 0x220 or 0x240)"); -module_param(mss_io, int, 0); +module_param_hw(mss_io, int, ioport, 0); MODULE_PARM_DESC(mss_io, "Set WSS (audio) i/o base (0x530, 0x604, 0xE80, 0xF40, or other. Address must end in 0 or 4 and must be from 0x100 to 0xFF4)"); -module_param(mss_irq, int, 0); +module_param_hw(mss_irq, int, irq, 0); MODULE_PARM_DESC(mss_irq, "Set WSS (audio) IRQ (3, 5, 7, 9, 10, 11, 12)"); -module_param(mss_dma, int, 0); +module_param_hw(mss_dma, int, dma, 0); MODULE_PARM_DESC(mss_dma, "Set WSS (audio) DMA (0, 1, 3)"); -module_param(mpu_io, int, 0); +module_param_hw(mpu_io, int, ioport, 0); MODULE_PARM_DESC(mpu_io, "Set MIDI i/o base (0x330 or other. Address must be on 4 location boundaries and must be from 0x100 to 0xFFC)"); -module_param(mpu_irq, int, 0); +module_param_hw(mpu_irq, int, irq, 0); MODULE_PARM_DESC(mpu_irq, "Set MIDI IRQ (3, 5, 7, 9, 10, 11, 12)"); -module_param(pss_cdrom_port, int, 0); +module_param_hw(pss_cdrom_port, int, ioport, 0); MODULE_PARM_DESC(pss_cdrom_port, "Set the PSS CDROM port i/o base (0x340 or other)"); module_param(pss_enable_joystick, bool, 0); MODULE_PARM_DESC(pss_enable_joystick, "Enables the PSS joystick port (1 to enable, 0 to disable)"); diff --git a/sound/oss/sb_card.c b/sound/oss/sb_card.c index fb5d7250de38..2a92cfe6cfe9 100644 --- a/sound/oss/sb_card.c +++ b/sound/oss/sb_card.c @@ -61,15 +61,15 @@ static int __initdata uart401 = 0; static int __initdata pnp = 0; #endif -module_param(io, int, 000); +module_param_hw(io, int, ioport, 000); MODULE_PARM_DESC(io, "Soundblaster i/o base address (0x220,0x240,0x260,0x280)"); -module_param(irq, int, 000); +module_param_hw(irq, int, irq, 000); MODULE_PARM_DESC(irq, "IRQ (5,7,9,10)"); -module_param(dma, int, 000); +module_param_hw(dma, int, dma, 000); MODULE_PARM_DESC(dma, "8-bit DMA channel (0,1,3)"); -module_param(dma16, int, 000); +module_param_hw(dma16, int, dma, 000); MODULE_PARM_DESC(dma16, "16-bit DMA channel (5,6,7)"); -module_param(mpu_io, int, 000); +module_param_hw(mpu_io, int, ioport, 000); MODULE_PARM_DESC(mpu_io, "MPU base address"); module_param(type, int, 000); MODULE_PARM_DESC(type, "You can set this to specific card type (doesn't " \ diff --git a/sound/oss/trix.c b/sound/oss/trix.c index 3c494dc93b93..a57bc635d758 100644 --- a/sound/oss/trix.c +++ b/sound/oss/trix.c @@ -413,15 +413,15 @@ static int __initdata sb_irq = -1; static int __initdata mpu_io = -1; static int __initdata mpu_irq = -1; -module_param(io, int, 0); -module_param(irq, int, 0); -module_param(dma, int, 0); -module_param(dma2, int, 0); -module_param(sb_io, int, 0); -module_param(sb_dma, int, 0); -module_param(sb_irq, int, 0); -module_param(mpu_io, int, 0); -module_param(mpu_irq, int, 0); +module_param_hw(io, int, ioport, 0); +module_param_hw(irq, int, irq, 0); +module_param_hw(dma, int, dma, 0); +module_param_hw(dma2, int, dma, 0); +module_param_hw(sb_io, int, ioport, 0); +module_param_hw(sb_dma, int, dma, 0); +module_param_hw(sb_irq, int, irq, 0); +module_param_hw(mpu_io, int, ioport, 0); +module_param_hw(mpu_irq, int, irq, 0); module_param(joystick, bool, 0); static int __init init_trix(void) diff --git a/sound/oss/uart401.c b/sound/oss/uart401.c index dae4d4344407..83dcc85b8688 100644 --- a/sound/oss/uart401.c +++ b/sound/oss/uart401.c @@ -429,8 +429,8 @@ static struct address_info cfg_mpu; static int io = -1; static int irq = -1; -module_param(io, int, 0444); -module_param(irq, int, 0444); +module_param_hw(io, int, ioport, 0444); +module_param_hw(irq, int, irq, 0444); static int __init init_uart401(void) diff --git a/sound/oss/uart6850.c b/sound/oss/uart6850.c index 1079133dd6ab..eda32d7eddbd 100644 --- a/sound/oss/uart6850.c +++ b/sound/oss/uart6850.c @@ -315,8 +315,8 @@ static struct address_info cfg_mpu; static int __initdata io = -1; static int __initdata irq = -1; -module_param(io, int, 0); -module_param(irq, int, 0); +module_param_hw(io, int, ioport, 0); +module_param_hw(irq, int, irq, 0); static int __init init_uart6850(void) { diff --git a/sound/oss/waveartist.c b/sound/oss/waveartist.c index 0b8d0de87273..4f0c3a232e41 100644 --- a/sound/oss/waveartist.c +++ b/sound/oss/waveartist.c @@ -2036,8 +2036,8 @@ __setup("waveartist=", setup_waveartist); #endif MODULE_DESCRIPTION("Rockwell WaveArtist RWA-010 sound driver"); -module_param(io, int, 0); /* IO base */ -module_param(irq, int, 0); /* IRQ */ -module_param(dma, int, 0); /* DMA */ -module_param(dma2, int, 0); /* DMA2 */ +module_param_hw(io, int, ioport, 0); /* IO base */ +module_param_hw(irq, int, irq, 0); /* IRQ */ +module_param_hw(dma, int, dma, 0); /* DMA */ +module_param_hw(dma2, int, dma, 0); /* DMA2 */ MODULE_LICENSE("GPL"); diff --git a/sound/pci/als4000.c b/sound/pci/als4000.c index 92bc06d01288..7844a75d8ed9 100644 --- a/sound/pci/als4000.c +++ b/sound/pci/als4000.c @@ -102,7 +102,7 @@ MODULE_PARM_DESC(id, "ID string for ALS4000 soundcard."); module_param_array(enable, bool, NULL, 0444); MODULE_PARM_DESC(enable, "Enable ALS4000 soundcard."); #ifdef SUPPORT_JOYSTICK -module_param_array(joystick_port, int, NULL, 0444); +module_param_hw_array(joystick_port, int, ioport, NULL, 0444); MODULE_PARM_DESC(joystick_port, "Joystick port address for ALS4000 soundcard. (0 = disabled)"); #endif diff --git a/sound/pci/cmipci.c b/sound/pci/cmipci.c index 227c9d3802b8..745a0a3743b4 100644 --- a/sound/pci/cmipci.c +++ b/sound/pci/cmipci.c @@ -68,14 +68,14 @@ module_param_array(id, charp, NULL, 0444); MODULE_PARM_DESC(id, "ID string for C-Media PCI soundcard."); module_param_array(enable, bool, NULL, 0444); MODULE_PARM_DESC(enable, "Enable C-Media PCI soundcard."); -module_param_array(mpu_port, long, NULL, 0444); +module_param_hw_array(mpu_port, long, ioport, NULL, 0444); MODULE_PARM_DESC(mpu_port, "MPU-401 port."); -module_param_array(fm_port, long, NULL, 0444); +module_param_hw_array(fm_port, long, ioport, NULL, 0444); MODULE_PARM_DESC(fm_port, "FM port."); module_param_array(soft_ac3, bool, NULL, 0444); MODULE_PARM_DESC(soft_ac3, "Software-conversion of raw SPDIF packets (model 033 only)."); #ifdef SUPPORT_JOYSTICK -module_param_array(joystick_port, int, NULL, 0444); +module_param_hw_array(joystick_port, int, ioport, NULL, 0444); MODULE_PARM_DESC(joystick_port, "Joystick port address."); #endif diff --git a/sound/pci/ens1370.c b/sound/pci/ens1370.c index 5d10349d11ce..09a63ef41ef2 100644 --- a/sound/pci/ens1370.c +++ b/sound/pci/ens1370.c @@ -106,7 +106,7 @@ module_param_array(enable, bool, NULL, 0444); MODULE_PARM_DESC(enable, "Enable Ensoniq AudioPCI soundcard."); #ifdef SUPPORT_JOYSTICK #ifdef CHIP1371 -module_param_array(joystick_port, int, NULL, 0444); +module_param_hw_array(joystick_port, int, ioport, NULL, 0444); MODULE_PARM_DESC(joystick_port, "Joystick port address."); #else module_param_array(joystick, bool, NULL, 0444); diff --git a/sound/pci/riptide/riptide.c b/sound/pci/riptide/riptide.c index 19c9df6b0f3d..f067c76d77f8 100644 --- a/sound/pci/riptide/riptide.c +++ b/sound/pci/riptide/riptide.c @@ -137,12 +137,12 @@ MODULE_PARM_DESC(id, "ID string for Riptide soundcard."); module_param_array(enable, bool, NULL, 0444); MODULE_PARM_DESC(enable, "Enable Riptide soundcard."); #ifdef SUPPORT_JOYSTICK -module_param_array(joystick_port, int, NULL, 0444); +module_param_hw_array(joystick_port, int, ioport, NULL, 0444); MODULE_PARM_DESC(joystick_port, "Joystick port # for Riptide soundcard."); #endif -module_param_array(mpu_port, int, NULL, 0444); +module_param_hw_array(mpu_port, int, ioport, NULL, 0444); MODULE_PARM_DESC(mpu_port, "MPU401 port # for Riptide driver."); -module_param_array(opl3_port, int, NULL, 0444); +module_param_hw_array(opl3_port, int, ioport, NULL, 0444); MODULE_PARM_DESC(opl3_port, "OPL3 port # for Riptide driver."); /* diff --git a/sound/pci/sonicvibes.c b/sound/pci/sonicvibes.c index a6aa48c5b969..8e3d4ec39c35 100644 --- a/sound/pci/sonicvibes.c +++ b/sound/pci/sonicvibes.c @@ -66,7 +66,7 @@ module_param_array(reverb, bool, NULL, 0444); MODULE_PARM_DESC(reverb, "Enable reverb (SRAM is present) for S3 SonicVibes soundcard."); module_param_array(mge, bool, NULL, 0444); MODULE_PARM_DESC(mge, "MIC Gain Enable for S3 SonicVibes soundcard."); -module_param(dmaio, uint, 0444); +module_param_hw(dmaio, uint, ioport, 0444); MODULE_PARM_DESC(dmaio, "DDMA i/o base address for S3 SonicVibes soundcard."); /* diff --git a/sound/pci/via82xx.c b/sound/pci/via82xx.c index d078e86414c2..b6c84d15b10b 100644 --- a/sound/pci/via82xx.c +++ b/sound/pci/via82xx.c @@ -92,7 +92,7 @@ module_param(index, int, 0444); MODULE_PARM_DESC(index, "Index value for VIA 82xx bridge."); module_param(id, charp, 0444); MODULE_PARM_DESC(id, "ID string for VIA 82xx bridge."); -module_param(mpu_port, long, 0444); +module_param_hw(mpu_port, long, ioport, 0444); MODULE_PARM_DESC(mpu_port, "MPU-401 port. (VT82C686x only)"); #ifdef SUPPORT_JOYSTICK module_param(joystick, bool, 0444); diff --git a/sound/pci/ymfpci/ymfpci.c b/sound/pci/ymfpci/ymfpci.c index 812e27a1bcbc..4faf3e1ed06a 100644 --- a/sound/pci/ymfpci/ymfpci.c +++ b/sound/pci/ymfpci/ymfpci.c @@ -55,12 +55,12 @@ module_param_array(id, charp, NULL, 0444); MODULE_PARM_DESC(id, "ID string for the Yamaha DS-1 PCI soundcard."); module_param_array(enable, bool, NULL, 0444); MODULE_PARM_DESC(enable, "Enable Yamaha DS-1 soundcard."); -module_param_array(mpu_port, long, NULL, 0444); +module_param_hw_array(mpu_port, long, ioport, NULL, 0444); MODULE_PARM_DESC(mpu_port, "MPU-401 Port."); -module_param_array(fm_port, long, NULL, 0444); +module_param_hw_array(fm_port, long, ioport, NULL, 0444); MODULE_PARM_DESC(fm_port, "FM OPL-3 Port."); #ifdef SUPPORT_JOYSTICK -module_param_array(joystick_port, long, NULL, 0444); +module_param_hw_array(joystick_port, long, ioport, NULL, 0444); MODULE_PARM_DESC(joystick_port, "Joystick port address"); #endif module_param_array(rear_switch, bool, NULL, 0444); |