diff options
| author | Linus Torvalds <torvalds@linux-foundation.org> | 2019-07-12 04:11:21 +0300 |
|---|---|---|
| committer | Linus Torvalds <torvalds@linux-foundation.org> | 2019-07-12 04:11:21 +0300 |
| commit | 8931084c0d017314ad025f19353f7c5c1d3782d8 (patch) | |
| tree | e5ae4dcaba8353cad27744b0150dd0b6513413fc | |
| parent | 17a20acaf171124017f43bc70bb4d7ca88070659 (diff) | |
| parent | 59592cc1f5937ced72e11e681c3e358a0375f7ae (diff) | |
| download | linux-8931084c0d017314ad025f19353f7c5c1d3782d8.tar.xz | |
Merge tag 'mmc-v5.3' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc
Pull MMC updates from Ulf Hansson:
"MMC core:
- Let the dma map ops deal with bouncing and drop dma_max_pfn() from
the dma-mapping interface for ARM
- Convert the generic MMC DT doc to YAML schemas
- Drop questionable support for powered-on re-init of SDIO cards at
runtime resume and for SDIO HW reset
- Prevent questionable re-init of powered-on removable SDIO cards at
system resume
- Cleanup and clarify some SDIO core code
MMC host:
- tmio: Make runtime PM enablement more flexible for variants
- tmio/renesas_sdhi: Rename DT doc tmio_mmc.txt to renesas,sdhi.txt
to clarify
- sdhci-pci: Add support for Intel EHL
- sdhci-pci-o2micro: Enable support for 8-bit bus
- sdhci-msm: Prevent acquiring a mutex while holding a spin_lock
- sdhci-of-esdhc: Improve clock management and tuning
- sdhci_am654: Enable support for 4 and 8-bit bus on J721E
- sdhci-sprd: Use pinctrl for a proper signal voltage switch
- sdhci-sprd: Add support for HS400 enhanced strobe mode
- sdhci-sprd: Enable PHY DLL and allow delay config to stabilize the
clock
- sdhci-sprd: Add support for optional gate clock
- sunxi-mmc: Convert DT doc to YAML schemas
- meson-gx: Add support for broken DRAM access for DMA
MEMSTICK core:
- Fixup error path of memstick_init()"
* tag 'mmc-v5.3' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc: (52 commits)
mmc: sdhci_am654: Add dependency on MMC_SDHCI_AM654
mmc: alcor: remove a redundant greater or equal to zero comparison
mmc: sdhci-msm: fix mutex while in spinlock
mmc: sdhci_am654: Make some symbols static
dma-mapping: remove dma_max_pfn
mmc: core: let the dma map ops handle bouncing
dt-binding: mmc: rename tmio_mmc.txt to renesas,sdhi.txt
mmc: sdhci-sprd: Add pin control support for voltage switch
dt-bindings: mmc: sprd: Add pinctrl support
mmc: sdhci-sprd: Add start_signal_voltage_switch ops
mmc: sdhci-pci: Add support for Intel EHL
mmc: tmio: Use dma_max_mapping_size() instead of a workaround
mmc: sdio: Drop unused in-parameter from mmc_sdio_init_card()
mmc: sdio: Drop unused in-parameter to mmc_sdio_reinit_card()
mmc: sdio: Don't re-initialize powered-on removable SDIO cards at resume
mmc: sdio: Drop powered-on re-init at runtime resume and HW reset
mmc: sdio: Move comment about re-initialization to mmc_sdio_reinit_card()
mmc: sdio: Drop mmc_claim|release_host() in mmc_sdio_power_restore()
mmc: sdio: Turn sdio_run_irqs() into static
mmc: sdhci: Fix indenting on SDHCI_CTRL_8BITBUS
...
38 files changed, 1187 insertions, 618 deletions
diff --git a/Documentation/devicetree/bindings/mmc/allwinner,sun4i-a10-mmc.yaml b/Documentation/devicetree/bindings/mmc/allwinner,sun4i-a10-mmc.yaml new file mode 100644 index 000000000000..df0280edef97 --- /dev/null +++ b/Documentation/devicetree/bindings/mmc/allwinner,sun4i-a10-mmc.yaml @@ -0,0 +1,98 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/mmc/allwinner,sun4i-a10-mmc.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Allwinner A10 MMC Controller Device Tree Bindings + +allOf: + - $ref: "mmc-controller.yaml" + +maintainers: + - Chen-Yu Tsai <wens@csie.org> + - Maxime Ripard <maxime.ripard@bootlin.com> + +properties: + "#address-cells": true + "#size-cells": true + + compatible: + oneOf: + - const: allwinner,sun4i-a10-mmc + - const: allwinner,sun5i-a13-mmc + - const: allwinner,sun7i-a20-mmc + - const: allwinner,sun8i-a83t-emmc + - const: allwinner,sun9i-a80-mmc + - const: allwinner,sun50i-a64-emmc + - const: allwinner,sun50i-a64-mmc + - items: + - const: allwinner,sun8i-a83t-mmc + - const: allwinner,sun7i-a20-mmc + - items: + - const: allwinner,sun50i-h6-emmc + - const: allwinner,sun50i-a64-emmc + - items: + - const: allwinner,sun50i-h6-mmc + - const: allwinner,sun50i-a64-mmc + - items: + - const: allwinner,sun8i-r40-emmc + - const: allwinner,sun50i-a64-emmc + - items: + - const: allwinner,sun8i-r40-mmc + - const: allwinner,sun50i-a64-mmc + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + clocks: + minItems: 2 + maxItems: 4 + items: + - description: Bus Clock + - description: Module Clock + - description: Output Clock + - description: Sample Clock + + clock-names: + minItems: 2 + maxItems: 4 + items: + - const: ahb + - const: mmc + - const: output + - const: sample + + resets: + maxItems: 1 + + reset-names: + const: ahb + +required: + - compatible + - reg + - interrupts + - clocks + - clock-names + +examples: + - | + mmc0: mmc@1c0f000 { + compatible = "allwinner,sun5i-a13-mmc"; + reg = <0x01c0f000 0x1000>; + clocks = <&ahb_gates 8>, <&mmc0_clk>; + clock-names = "ahb", "mmc"; + interrupts = <32>; + bus-width = <4>; + cd-gpios = <&pio 7 1 0>; + }; + +# FIXME: We should set it, but it would report all the generic +# properties as additional properties. +# additionalProperties: false + +... diff --git a/Documentation/devicetree/bindings/mmc/amlogic,meson-gx.txt b/Documentation/devicetree/bindings/mmc/amlogic,meson-gx.txt index 13e70409e8ac..ccc5358db131 100644 --- a/Documentation/devicetree/bindings/mmc/amlogic,meson-gx.txt +++ b/Documentation/devicetree/bindings/mmc/amlogic,meson-gx.txt @@ -22,6 +22,10 @@ Required properties: clock rate requested by the MMC core. - resets : phandle of the internal reset line +Optional properties: +- amlogic,dram-access-quirk: set when controller's internal DMA engine cannot access the + DRAM memory, like on the G12A dedicated SDIO controller. + Example: sd_emmc_a: mmc@70000 { diff --git a/Documentation/devicetree/bindings/mmc/mmc-controller.yaml b/Documentation/devicetree/bindings/mmc/mmc-controller.yaml new file mode 100644 index 000000000000..080754e0ef35 --- /dev/null +++ b/Documentation/devicetree/bindings/mmc/mmc-controller.yaml @@ -0,0 +1,374 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/mmc/mmc-controller.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: MMC Controller Generic Binding + +maintainers: + - Ulf Hansson <ulf.hansson@linaro.org> + +description: | + These properties are common to multiple MMC host controllers. Any host + that requires the respective functionality should implement them using + these definitions. + +properties: + $nodename: + pattern: "^mmc(@.*)?$" + + "#address-cells": + const: 1 + description: | + The cell is the slot ID if a function subnode is used. + + "#size-cells": + const: 0 + + # Card Detection. + # If none of these properties are supplied, the host native card + # detect will be used. Only one of them should be provided. + + broken-cd: + $ref: /schemas/types.yaml#/definitions/flag + description: + There is no card detection available; polling must be used. + + cd-gpios: + description: + The card detection will be done using the GPIO provided. + + non-removable: + $ref: /schemas/types.yaml#/definitions/flag + description: + Non-removable slot (like eMMC); assume always present. + + # *NOTE* on CD and WP polarity. To use common for all SD/MMC host + # controllers line polarity properties, we have to fix the meaning + # of the "normal" and "inverted" line levels. We choose to follow + # the SDHCI standard, which specifies both those lines as "active + # low." Therefore, using the "cd-inverted" property means, that the + # CD line is active high, i.e. it is high, when a card is + # inserted. Similar logic applies to the "wp-inverted" property. + # + # CD and WP lines can be implemented on the hardware in one of two + # ways: as GPIOs, specified in cd-gpios and wp-gpios properties, or + # as dedicated pins. Polarity of dedicated pins can be specified, + # using *-inverted properties. GPIO polarity can also be specified + # using the GPIO_ACTIVE_LOW flag. This creates an ambiguity in the + # latter case. We choose to use the XOR logic for GPIO CD and WP + # lines. This means, the two properties are "superimposed," for + # example leaving the GPIO_ACTIVE_LOW flag clear and specifying the + # respective *-inverted property property results in a + # double-inversion and actually means the "normal" line polarity is + # in effect. + wp-inverted: + $ref: /schemas/types.yaml#/definitions/flag + description: + The Write Protect line polarity is inverted. + + cd-inverted: + $ref: /schemas/types.yaml#/definitions/flag + description: + The CD line polarity is inverted. + + # Other properties + + bus-width: + allOf: + - $ref: /schemas/types.yaml#/definitions/uint32 + - enum: [1, 4, 8] + default: 1 + description: + Number of data lines. + + max-frequency: + allOf: + - $ref: /schemas/types.yaml#/definitions/uint32 + - minimum: 400000 + - maximum: 200000000 + description: + Maximum operating frequency of the bus. + + disable-wp: + $ref: /schemas/types.yaml#/definitions/flag + description: + When set, no physical write-protect line is present. This + property should only be specified when the controller has a + dedicated write-protect detection logic. If a GPIO is always + used for the write-protect detection. If a GPIO is always used + for the write-protect detection logic, it is sufficient to not + specify the wp-gpios property in the absence of a write-protect + line. + + wp-gpios: + description: + GPIO to use for the write-protect detection. + + cd-debounce-delay-ms: + description: + Set delay time before detecting card after card insert + interrupt. + + no-1-8-v: + $ref: /schemas/types.yaml#/definitions/flag + description: + When specified, denotes that 1.8V card voltage is not supported + on this system, even if the controller claims it. + + cap-sd-highspeed: + $ref: /schemas/types.yaml#/definitions/flag + description: + SD high-speed timing is supported. + + cap-mmc-highspeed: + $ref: /schemas/types.yaml#/definitions/flag + description: + MMC high-speed timing is supported. + + sd-uhs-sdr12: + $ref: /schemas/types.yaml#/definitions/flag + description: + SD UHS SDR12 speed is supported. + + sd-uhs-sdr25: + $ref: /schemas/types.yaml#/definitions/flag + description: + SD UHS SDR25 speed is supported. + + sd-uhs-sdr50: + $ref: /schemas/types.yaml#/definitions/flag + description: + SD UHS SDR50 speed is supported. + + sd-uhs-sdr104: + $ref: /schemas/types.yaml#/definitions/flag + description: + SD UHS SDR104 speed is supported. + + sd-uhs-ddr50: + $ref: /schemas/types.yaml#/definitions/flag + description: + SD UHS DDR50 speed is supported. + + cap-power-off-card: + $ref: /schemas/types.yaml#/definitions/flag + description: + Powering off the card is safe. + + cap-mmc-hw-reset: + $ref: /schemas/types.yaml#/definitions/flag + description: + eMMC hardware reset is supported + + cap-sdio-irq: + $ref: /schemas/types.yaml#/definitions/flag + description: + enable SDIO IRQ signalling on this interface + + full-pwr-cycle: + $ref: /schemas/types.yaml#/definitions/flag + description: + Full power cycle of the card is supported. + + mmc-ddr-1_2v: + $ref: /schemas/types.yaml#/definitions/flag + description: + eMMC high-speed DDR mode (1.2V I/O) is supported. + + mmc-ddr-1_8v: + $ref: /schemas/types.yaml#/definitions/flag + description: + eMMC high-speed DDR mode (1.8V I/O) is supported. + + mmc-ddr-3_3v: + $ref: /schemas/types.yaml#/definitions/flag + description: + eMMC high-speed DDR mode (3.3V I/O) is supported. + + mmc-hs200-1_2v: + $ref: /schemas/types.yaml#/definitions/flag + description: + eMMC HS200 mode (1.2V I/O) is supported. + + mmc-hs200-1_8v: + $ref: /schemas/types.yaml#/definitions/flag + description: + eMMC HS200 mode (1.8V I/O) is supported. + + mmc-hs400-1_2v: + $ref: /schemas/types.yaml#/definitions/flag + description: + eMMC HS400 mode (1.2V I/O) is supported. + + mmc-hs400-1_8v: + $ref: /schemas/types.yaml#/definitions/flag + description: + eMMC HS400 mode (1.8V I/O) is supported. + + mmc-hs400-enhanced-strobe: + $ref: /schemas/types.yaml#/definitions/flag + description: + eMMC HS400 enhanced strobe mode is supported + + dsr: + allOf: + - $ref: /schemas/types.yaml#/definitions/uint32 + - minimum: 0 + - maximum: 0xffff + description: + Value the card Driver Stage Register (DSR) should be programmed + with. + + no-sdio: + $ref: /schemas/types.yaml#/definitions/flag + description: + Controller is limited to send SDIO commands during + initialization. + + no-sd: + $ref: /schemas/types.yaml#/definitions/flag + description: + Controller is limited to send SD commands during initialization. + + no-mmc: + $ref: /schemas/types.yaml#/definitions/flag + description: + Controller is limited to send MMC commands during + initialization. + + fixed-emmc-driver-type: + allOf: + - $ref: /schemas/types.yaml#/definitions/uint32 + - minimum: 0 + - maximum: 4 + description: + For non-removable eMMC, enforce this driver type. The value is + the driver type as specified in the eMMC specification (table + 206 in spec version 5.1) + + post-power-on-delay-ms: + allOf: + - $ref: /schemas/types.yaml#/definitions/uint32 + - default: 10 + description: + It was invented for MMC pwrseq-simple which could be referred to + mmc-pwrseq-simple.txt. But now it\'s reused as a tunable delay + waiting for I/O signalling and card power supply to be stable, + regardless of whether pwrseq-simple is used. Default to 10ms if + no available. + + supports-cqe: + $ref: /schemas/types.yaml#/definitions/flag + description: + The presence of this property indicates that the corresponding + MMC host controller supports HW command queue feature. + + disable-cqe-dcmd: + $ref: /schemas/types.yaml#/definitions/flag + description: + The presence of this property indicates that the MMC + controller\'s command queue engine (CQE) does not support direct + commands (DCMDs). + + keep-power-in-suspend: + $ref: /schemas/types.yaml#/definitions/flag + description: + SDIO only. Preserves card power during a suspend/resume cycle. + + # Deprecated: enable-sdio-wakeup + wakeup-source: + $ref: /schemas/types.yaml#/definitions/flag + description: + SDIO only. Enables wake up of host system on SDIO IRQ assertion. + + vmmc-supply: + description: + Supply for the card power + + vqmmc-supply: + description: + Supply for the bus IO line power + + mmc-pwrseq: + $ref: /schemas/types.yaml#/definitions/phandle + description: + System-on-Chip designs may specify a specific MMC power + sequence. To successfully detect an (e)MMC/SD/SDIO card, that + power sequence must be maintained while initializing the card. + +patternProperties: + "^.*@[0-9]+$": + type: object + description: | + On embedded systems the cards connected to a host may need + additional properties. These can be specified in subnodes to the + host controller node. The subnodes are identified by the + standard \'reg\' property. Which information exactly can be + specified depends on the bindings for the SDIO function driver + for the subnode, as specified by the compatible string. + + properties: + compatible: + description: | + Name of SDIO function following generic names recommended + practice + + reg: + items: + - minimum: 0 + maximum: 7 + description: + Must contain the SDIO function number of the function this + subnode describes. A value of 0 denotes the memory SD + function, values from 1 to 7 denote the SDIO functions. + + broken-hpi: + $ref: /schemas/types.yaml#/definitions/flag + description: + Use this to indicate that the mmc-card has a broken hpi + implementation, and that hpi should not be used. + + required: + - reg + +dependencies: + cd-debounce-delay-ms: [ cd-gpios ] + fixed-emmc-driver-type: [ non-removable ] + +examples: + - | + sdhci@ab000000 { + compatible = "sdhci"; + reg = <0xab000000 0x200>; + interrupts = <23>; + bus-width = <4>; + cd-gpios = <&gpio 69 0>; + cd-inverted; + wp-gpios = <&gpio 70 0>; + max-frequency = <50000000>; + keep-power-in-suspend; + wakeup-source; + mmc-pwrseq = <&sdhci0_pwrseq>; + }; + + - | + mmc3: mmc@1c12000 { + #address-cells = <1>; + #size-cells = <0>; + pinctrl-names = "default"; + pinctrl-0 = <&mmc3_pins_a>; + vmmc-supply = <®_vmmc3>; + bus-width = <4>; + non-removable; + mmc-pwrseq = <&sdhci0_pwrseq>; + + brcmf: bcrmf@1 { + reg = <1>; + compatible = "brcm,bcm43xx-fmac"; + interrupt-parent = <&pio>; + interrupts = <10 8>; + interrupt-names = "host-wake"; + }; + }; diff --git a/Documentation/devicetree/bindings/mmc/mmc.txt b/Documentation/devicetree/bindings/mmc/mmc.txt index c269dbe384fe..bf9d7d3febf1 100644 --- a/Documentation/devicetree/bindings/mmc/mmc.txt +++ b/Documentation/devicetree/bindings/mmc/mmc.txt @@ -1,177 +1 @@ -These properties are common to multiple MMC host controllers. Any host -that requires the respective functionality should implement them using -these definitions. - -Interpreted by the OF core: -- reg: Registers location and length. -- interrupts: Interrupts used by the MMC controller. - -Card detection: -If no property below is supplied, host native card detect is used. -Only one of the properties in this section should be supplied: - - broken-cd: There is no card detection available; polling must be used. - - cd-gpios: Specify GPIOs for card detection, see gpio binding - - non-removable: non-removable slot (like eMMC); assume always present. - -Optional properties: -- bus-width: Number of data lines, can be <1>, <4>, or <8>. The default - will be <1> if the property is absent. -- wp-gpios: Specify GPIOs for write protection, see gpio binding -- cd-inverted: when present, polarity on the CD line is inverted. See the note - below for the case, when a GPIO is used for the CD line -- cd-debounce-delay-ms: Set delay time before detecting card after card insert interrupt. - It's only valid when cd-gpios is present. -- wp-inverted: when present, polarity on the WP line is inverted. See the note - below for the case, when a GPIO is used for the WP line -- disable-wp: When set no physical WP line is present. This property should - only be specified when the controller has a dedicated write-protect - detection logic. If a GPIO is always used for the write-protect detection - logic it is sufficient to not specify wp-gpios property in the absence of a WP - line. -- max-frequency: maximum operating clock frequency -- no-1-8-v: when present, denotes that 1.8v card voltage is not supported on - this system, even if the controller claims it is. -- cap-sd-highspeed: SD high-speed timing is supported -- cap-mmc-highspeed: MMC high-speed timing is supported -- sd-uhs-sdr12: SD UHS SDR12 speed is supported -- sd-uhs-sdr25: SD UHS SDR25 speed is supported -- sd-uhs-sdr50: SD UHS SDR50 speed is supported -- sd-uhs-sdr104: SD UHS SDR104 speed is supported -- sd-uhs-ddr50: SD UHS DDR50 speed is supported -- cap-power-off-card: powering off the card is safe -- cap-mmc-hw-reset: eMMC hardware reset is supported -- cap-sdio-irq: enable SDIO IRQ signalling on this interface -- full-pwr-cycle: full power cycle of the card is supported -- mmc-ddr-3_3v: eMMC high-speed DDR mode(3.3V I/O) is supported -- mmc-ddr-1_8v: eMMC high-speed DDR mode(1.8V I/O) is supported -- mmc-ddr-1_2v: eMMC high-speed DDR mode(1.2V I/O) is supported -- mmc-hs200-1_8v: eMMC HS200 mode(1.8V I/O) is supported -- mmc-hs200-1_2v: eMMC HS200 mode(1.2V I/O) is supported -- mmc-hs400-1_8v: eMMC HS400 mode(1.8V I/O) is supported -- mmc-hs400-1_2v: eMMC HS400 mode(1.2V I/O) is supported -- mmc-hs400-enhanced-strobe: eMMC HS400 enhanced strobe mode is supported -- dsr: Value the card's (optional) Driver Stage Register (DSR) should be - programmed with. Valid range: [0 .. 0xffff]. -- no-sdio: controller is limited to send sdio cmd during initialization -- no-sd: controller is limited to send sd cmd during initialization -- no-mmc: controller is limited to send mmc cmd during initialization -- fixed-emmc-driver-type: for non-removable eMMC, enforce this driver type. - The value <n> is the driver type as specified in the eMMC specification - (table 206 in spec version 5.1). -- post-power-on-delay-ms : It was invented for MMC pwrseq-simple which could - be referred to mmc-pwrseq-simple.txt. But now it's reused as a tunable delay - waiting for I/O signalling and card power supply to be stable, regardless of - whether pwrseq-simple is used. Default to 10ms if no available. -- supports-cqe : The presence of this property indicates that the corresponding - MMC host controller supports HW command queue feature. -- disable-cqe-dcmd: This property indicates that the MMC controller's command - queue engine (CQE) does not support direct commands (DCMDs). - -*NOTE* on CD and WP polarity. To use common for all SD/MMC host controllers line -polarity properties, we have to fix the meaning of the "normal" and "inverted" -line levels. We choose to follow the SDHCI standard, which specifies both those -lines as "active low." Therefore, using the "cd-inverted" property means, that -the CD line is active high, i.e. it is high, when a card is inserted. Similar -logic applies to the "wp-inverted" property. - -CD and WP lines can be implemented on the hardware in one of two ways: as GPIOs, -specified in cd-gpios and wp-gpios properties, or as dedicated pins. Polarity of -dedicated pins can be specified, using *-inverted properties. GPIO polarity can -also be specified using the GPIO_ACTIVE_LOW flag. This creates an ambiguity -in the latter case. We choose to use the XOR logic for GPIO CD and WP lines. -This means, the two properties are "superimposed," for example leaving the -GPIO_ACTIVE_LOW flag clear and specifying the respective *-inverted property -property results in a double-inversion and actually means the "normal" line -polarity is in effect. - -Optional SDIO properties: -- keep-power-in-suspend: Preserves card power during a suspend/resume cycle -- wakeup-source: Enables wake up of host system on SDIO IRQ assertion - (Legacy property supported: "enable-sdio-wakeup") - -MMC power ---------- - -Controllers may implement power control from both the connected cards and -the IO signaling (for example to change to high-speed 1.8V signalling). If -the system supports this, then the following two properties should point -to valid regulator nodes: - -- vqmmc-supply: supply node for IO line power -- vmmc-supply: supply node for card's power - - -MMC power sequences: --------------------- - -System on chip designs may specify a specific MMC power sequence. To -successfully detect an (e)MMC/SD/SDIO card, that power sequence must be -maintained while initializing the card. - -Optional property: -- mmc-pwrseq: phandle to the MMC power sequence node. See "mmc-pwrseq-*" - for documentation of MMC power sequence bindings. - - -Use of Function subnodes ------------------------- - -On embedded systems the cards connected to a host may need additional -properties. These can be specified in subnodes to the host controller node. -The subnodes are identified by the standard 'reg' property. -Which information exactly can be specified depends on the bindings for the -SDIO function driver for the subnode, as specified by the compatible string. - -Required host node properties when using function subnodes: -- #address-cells: should be one. The cell is the slot id. -- #size-cells: should be zero. - -Required function subnode properties: -- reg: Must contain the SDIO function number of the function this subnode - describes. A value of 0 denotes the memory SD function, values from - 1 to 7 denote the SDIO functions. - -Optional function subnode properties: -- compatible: name of SDIO function following generic names recommended practice - - -Examples --------- - -Basic example: - -sdhci@ab000000 { - compatible = "sdhci"; - reg = <0xab000000 0x200>; - interrupts = <23>; - bus-width = <4>; - cd-gpios = <&gpio 69 0>; - cd-inverted; - wp-gpios = <&gpio 70 0>; - max-frequency = <50000000>; - keep-power-in-suspend; - wakeup-source; - mmc-pwrseq = <&sdhci0_pwrseq> -} - -Example with sdio function subnode: - -mmc3: mmc@1c12000 { - #address-cells = <1>; - #size-cells = <0>; - - pinctrl-names = "default"; - pinctrl-0 = <&mmc3_pins_a>; - vmmc-supply = <®_vmmc3>; - bus-width = <4>; - non-removable; - mmc-pwrseq = <&sdhci0_pwrseq> - - brcmf: bcrmf@1 { - reg = <1>; - compatible = "brcm,bcm43xx-fmac"; - interrupt-parent = <&pio>; - interrupts = <10 8>; /* PH10 / EINT10 */ - interrupt-names = "host-wake"; - }; -}; +This file has moved to mmc-controller.yaml. diff --git a/Documentation/devicetree/bindings/mmc/tmio_mmc.txt b/Documentation/devicetree/bindings/mmc/renesas,sdhi.txt index 2b4f17ca9087..dd08d038a65c 100644 --- a/Documentation/devicetree/bindings/mmc/tmio_mmc.txt +++ b/Documentation/devicetree/bindings/mmc/renesas,sdhi.txt @@ -1,13 +1,4 @@ -* Toshiba Mobile IO SD/MMC controller - -The tmio-mmc driver doesn't probe its devices actively, instead its binding to -devices is managed by either MFD drivers or by the sh_mobile_sdhi platform -driver. Those drivers supply the tmio-mmc driver with platform data, that either -describe hardware capabilities, known to them, or are obtained by them from -their own platform data or from their DT information. In the latter case all -compulsory and any optional properties, common to all SD/MMC drivers, as -described in mmc.txt, can be used. Additionally the following tmio_mmc-specific -optional bindings can be used. +* Renesas SDHI SD/MMC controller Required properties: - compatible: should contain one or more of the following: diff --git a/Documentation/devicetree/bindings/mmc/sdhci-am654.txt b/Documentation/devicetree/bindings/mmc/sdhci-am654.txt index 15dbbbace27e..50e87df47971 100644 --- a/Documentation/devicetree/bindings/mmc/sdhci-am654.txt +++ b/Documentation/devicetree/bindings/mmc/sdhci-am654.txt @@ -8,7 +8,10 @@ Only deviations are documented here. [3] Documentation/devicetree/bindings/interrupt-controller/interrupts.txt Required Properties: - - compatible: should be "ti,am654-sdhci-5.1" + - compatible: should be one of: + "ti,am654-sdhci-5.1": SDHCI on AM654 device. + "ti,j721e-sdhci-8bit": 8 bit SDHCI on J721E device. + "ti,j721e-sdhci-4bit": 4 bit SDHCI on J721E device. - reg: Must be two entries. - The first should be the sdhci register space - The second should the subsystem/phy register space @@ -16,9 +19,13 @@ Required Properties: - clock-names: Tuple including "clk_xin" and "clk_ahb" - interrupts: Interrupt specifiers - ti,otap-del-sel: Output Tap Delay select + +Optional Properties (Required for ti,am654-sdhci-5.1 and ti,j721e-sdhci-8bit): - ti,trm-icp: DLL trim select - ti,driver-strength-ohm: driver strength in ohms. Valid values are 33, 40, 50, 66 and 100 ohms. +Optional Properties: + - ti,strobe-sel: strobe select delay for HS400 speed mode. Default value: 0x0. Example: diff --git a/Documentation/devicetree/bindings/mmc/sdhci-sprd.txt b/Documentation/devicetree/bindings/mmc/sdhci-sprd.txt index 45c9978aad7b..eb7eb1b529f0 100644 --- a/Documentation/devicetree/bindings/mmc/sdhci-sprd.txt +++ b/Documentation/devicetree/bindings/mmc/sdhci-sprd.txt @@ -14,10 +14,31 @@ Required properties: - clock-names: Should contain the following: "sdio" - SDIO source clock (required) "enable" - gate clock which used for enabling/disabling the device (required) + "2x_enable" - gate clock controlling the device for some special platforms (optional) Optional properties: - assigned-clocks: the same with "sdio" clock - assigned-clock-parents: the default parent of "sdio" clock +- pinctrl-names: should be "default", "state_uhs" +- pinctrl-0: should contain default/high speed pin control +- pinctrl-1: should contain uhs mode pin control + +PHY DLL delays are used to delay the data valid window, and align the window +to sampling clock. PHY DLL delays can be configured by following properties, +and each property contains 4 cells which are used to configure the clock data +write line delay value, clock read command line delay value, clock read data +positive edge delay value and clock read data negative edge delay value. +Each cell's delay value unit is cycle of the PHY clock. + +- sprd,phy-delay-legacy: Delay value for legacy timing. +- sprd,phy-delay-sd-highspeed: Delay value for SD high-speed timing. +- sprd,phy-delay-sd-uhs-sdr50: Delay value for SD UHS SDR50 timing. +- sprd,phy-delay-sd-uhs-sdr104: Delay value for SD UHS SDR50 timing. +- sprd,phy-delay-mmc-highspeed: Delay value for MMC high-speed timing. +- sprd,phy-delay-mmc-ddr52: Delay value for MMC DDR52 timing. +- sprd,phy-delay-mmc-hs200: Delay value for MMC HS200 timing. +- sprd,phy-delay-mmc-hs400: Delay value for MMC HS400 timing. +- sprd,phy-delay-mmc-hs400es: Delay value for MMC HS400 enhanced strobe timing. Examples: @@ -32,6 +53,11 @@ sdio0: sdio@20600000 { assigned-clocks = <&ap_clk CLK_EMMC_2X>; assigned-clock-parents = <&rpll CLK_RPLL_390M>; + pinctrl-names = "default", "state_uhs"; + pinctrl-0 = <&sd0_pins_default>; + pinctrl-1 = <&sd0_pins_uhs>; + + sprd,phy-delay-sd-uhs-sdr104 = <0x3f 0x7f 0x2e 0x2e>; bus-width = <8>; non-removable; no-sdio; diff --git a/Documentation/devicetree/bindings/mmc/sunxi-mmc.txt b/Documentation/devicetree/bindings/mmc/sunxi-mmc.txt deleted file mode 100644 index e9cb3ec5e502..000000000000 --- a/Documentation/devicetree/bindings/mmc/sunxi-mmc.txt +++ /dev/null @@ -1,52 +0,0 @@ -* Allwinner sunxi MMC controller - -The highspeed MMC host controller on Allwinner SoCs provides an interface -for MMC, SD and SDIO types of memory cards. - -Supported maximum speeds are the ones of the eMMC standard 4.5 as well -as the speed of SD standard 3.0. -Absolute maximum transfer rate is 200MB/s - -Required properties: - - compatible : should be one of: - * "allwinner,sun4i-a10-mmc" - * "allwinner,sun5i-a13-mmc" - * "allwinner,sun7i-a20-mmc" - * "allwinner,sun8i-a83t-emmc" - * "allwinner,sun9i-a80-mmc" - * "allwinner,sun50i-a64-emmc" - * "allwinner,sun50i-a64-mmc" - * "allwinner,sun50i-h6-emmc", "allwinner.sun50i-a64-emmc" - * "allwinner,sun50i-h6-mmc", "allwinner.sun50i-a64-mmc" - - reg : mmc controller base registers - - clocks : a list with 4 phandle + clock specifier pairs - - clock-names : must contain "ahb", "mmc", "output" and "sample" - - interrupts : mmc controller interrupt - -Optional properties: - - resets : phandle + reset specifier pair - - reset-names : must contain "ahb" - - for cd, bus-width and additional generic mmc parameters - please refer to mmc.txt within this directory - -Examples: - - Within .dtsi: - mmc0: mmc@1c0f000 { - compatible = "allwinner,sun5i-a13-mmc"; - reg = <0x01c0f000 0x1000>; - clocks = <&ahb_gates 8>, <&mmc0_clk>, <&mmc0_output_clk>, <&mmc0_sample_clk>; - clock-names = "ahb", "mod", "output", "sample"; - interrupts = <0 32 4>; - status = "disabled"; - }; - - - Within dts: - mmc0: mmc@1c0f000 { - pinctrl-names = "default", "default"; - pinctrl-0 = <&mmc0_pins_a>; - pinctrl-1 = <&mmc0_cd_pin_reference_design>; - bus-width = <4>; - cd-gpios = <&pio 7 1 0>; /* PH1 */ - cd-inverted; - status = "okay"; - }; diff --git a/arch/arm/include/asm/dma-mapping.h b/arch/arm/include/asm/dma-mapping.h index 03ba90ffc0f8..7e0486ad1318 100644 --- a/arch/arm/include/asm/dma-mapping.h +++ b/arch/arm/include/asm/dma-mapping.h @@ -89,13 +89,6 @@ static inline dma_addr_t virt_to_dma(struct device *dev, void *addr) } #endif -/* The ARM override for dma_max_pfn() */ -static inline unsigned long dma_max_pfn(struct device *dev) -{ - return dma_to_pfn(dev, *dev->dma_mask); -} -#define dma_max_pfn(dev) dma_max_pfn(dev) - /* do not use this function in a driver */ static inline bool is_device_dma_coherent(struct device *dev) { diff --git a/drivers/memstick/core/memstick.c b/drivers/memstick/core/memstick.c index 6cfb293396f2..693ee73eb291 100644 --- a/drivers/memstick/core/memstick.c +++ b/drivers/memstick/core/memstick.c @@ -625,13 +625,18 @@ static int __init memstick_init(void) return -ENOMEM; rc = bus_register(&memstick_bus_type); - if (!rc) - rc = class_register(&memstick_host_class); + if (rc) + goto error_destroy_workqueue; - if (!rc) - return 0; + rc = class_register(&memstick_host_class); + if (rc) + goto error_bus_unregister; + + return 0; +error_bus_unregister: bus_unregister(&memstick_bus_type); +error_destroy_workqueue: destroy_workqueue(workqueue); return rc; diff --git a/drivers/mmc/core/debugfs.c b/drivers/mmc/core/debugfs.c index 2797771a5fa8..09e0c7659469 100644 --- a/drivers/mmc/core/debugfs.c +++ b/drivers/mmc/core/debugfs.c @@ -227,45 +227,21 @@ void mmc_add_host_debugfs(struct mmc_host *host) struct dentry *root; root = debugfs_create_dir(mmc_hostname(host), NULL); - if (IS_ERR(root)) - /* Don't complain -- debugfs just isn't enabled */ - return; - if (!root) - /* Complain -- debugfs is enabled, but it failed to - * create the directory. */ - goto err_root; - host->debugfs_root = root; - if (!debugfs_create_file("ios", S_IRUSR, root, host, &mmc_ios_fops)) - goto err_node; - - if (!debugfs_create_x32("caps", S_IRUSR, root, &host->caps)) - goto err_node; - - if (!debugfs_create_x32("caps2", S_IRUSR, root, &host->caps2)) - goto err_node; - - if (!debugfs_create_file("clock", S_IRUSR | S_IWUSR, root, host, - &mmc_clock_fops)) - goto err_node; + debugfs_create_file("ios", S_IRUSR, root, host, &mmc_ios_fops); + debugfs_create_x32("caps", S_IRUSR, root, &host->caps); + debugfs_create_x32("caps2", S_IRUSR, root, &host->caps2); + debugfs_create_file("clock", S_IRUSR | S_IWUSR, root, host, + &mmc_clock_fops); #ifdef CONFIG_FAIL_MMC_REQUEST if (fail_request) setup_fault_attr(&fail_default_attr, fail_request); host->fail_mmc_request = fail_default_attr; - if (IS_ERR(fault_create_debugfs_attr("fail_mmc_request", - root, - &host->fail_mmc_request))) - goto err_node; + fault_create_debugfs_attr("fail_mmc_request", root, + &host->fail_mmc_request); #endif - return; - -err_node: - debugfs_remove_recursive(root); - host->debugfs_root = NULL; -err_root: - dev_err(&host->class_dev, "failed to initialize debugfs\n"); } void mmc_remove_host_debugfs(struct mmc_host *host) @@ -282,25 +258,9 @@ void mmc_add_card_debugfs(struct mmc_card *card) return; root = debugfs_create_dir(mmc_card_id(card), host->debugfs_root); - if (IS_ERR(root)) - /* Don't complain -- debugfs just isn't enabled */ - return; - if (!root) - /* Complain -- debugfs is enabled, but it failed to - * create the directory. */ - goto err; - card->debugfs_root = root; - if (!debugfs_create_x32("state", S_IRUSR, root, &card->state)) - goto err; - - return; - -err: - debugfs_remove_recursive(root); - card->debugfs_root = NULL; - dev_err(&card->dev, "failed to initialize debugfs\n"); + debugfs_create_x32("state", S_IRUSR, root, &card->state); } void mmc_remove_card_debugfs(struct mmc_card *card) diff --git a/drivers/mmc/core/mmc_test.c b/drivers/mmc/core/mmc_test.c index b27df2d2b5ae..492dd4596314 100644 --- a/drivers/mmc/core/mmc_test.c +++ b/drivers/mmc/core/mmc_test.c @@ -3167,15 +3167,7 @@ static int __mmc_test_register_dbgfs_file(struct mmc_card *card, struct mmc_test_dbgfs_file *df; if (card->debugfs_root) - file = debugfs_create_file(name, mode, card->debugfs_root, - card, fops); - - if (IS_ERR_OR_NULL(file)) { - dev_err(&card->dev, - "Can't create %s. Perhaps debugfs is disabled.\n", - name); - return -ENODEV; - } + debugfs_create_file(name, mode, card->debugfs_root, card, fops); df = kmalloc(sizeof(*df), GFP_KERNEL); if (!df) { diff --git a/drivers/mmc/core/queue.c b/drivers/mmc/core/queue.c index 3557d5c51141..e327f80ebe70 100644 --- a/drivers/mmc/core/queue.c +++ b/drivers/mmc/core/queue.c @@ -350,18 +350,15 @@ static const struct blk_mq_ops mmc_mq_ops = { static void mmc_setup_queue(struct mmc_queue *mq, struct mmc_card *card) { struct mmc_host *host = card->host; - u64 limit = BLK_BOUNCE_HIGH; unsigned block_size = 512; - if (mmc_dev(host)->dma_mask && *mmc_dev(host)->dma_mask) - limit = (u64)dma_max_pfn(mmc_dev(host)) << PAGE_SHIFT; - blk_queue_flag_set(QUEUE_FLAG_NONROT, mq->queue); blk_queue_flag_clear(QUEUE_FLAG_ADD_RANDOM, mq->queue); if (mmc_can_erase(card)) mmc_queue_setup_discard(mq->queue, card); - blk_queue_bounce_limit(mq->queue, limit); + if (!mmc_dev(host)->dma_mask || !*mmc_dev(host)->dma_mask) + blk_queue_bounce_limit(mq->queue, BLK_BOUNCE_HIGH); blk_queue_max_hw_sectors(mq->queue, min(host->max_blk_count, host->max_req_size / 512)); blk_queue_max_segments(mq->queue, host->max_segs); diff --git a/drivers/mmc/core/sdio.c b/drivers/mmc/core/sdio.c index 712a7742765e..8dd8fc32ecca 100644 --- a/drivers/mmc/core/sdio.c +++ b/drivers/mmc/core/sdio.c @@ -559,7 +559,7 @@ static void mmc_sdio_resend_if_cond(struct mmc_host *host, * we're trying to reinitialise. */ static int mmc_sdio_init_card(struct mmc_host *host, u32 ocr, - struct mmc_card *oldcard, int powered_resume) + struct mmc_card *oldcard) { struct mmc_card *card; int err; @@ -582,11 +582,9 @@ try_again: /* * Inform the card of the voltage */ - if (!powered_resume) { - err = mmc_send_io_op_cond(host, ocr, &rocr); - if (err) - goto err; - } + err = mmc_send_io_op_cond(host, ocr, &rocr); + if (err) + goto err; /* * For SPI, enable CRC as appropriate. @@ -645,7 +643,7 @@ try_again: * try to init uhs card. sdio_read_cccr will take over this task * to make sure which speed mode should work. */ - if (!powered_resume && (rocr & ocr & R4_18V_PRESENT)) { + if (rocr & ocr & R4_18V_PRESENT) { err = mmc_set_uhs_voltage(host, ocr_card); if (err == -EAGAIN) { mmc_sdio_resend_if_cond(host, card); @@ -659,7 +657,7 @@ try_again: /* * For native busses: set card RCA and quit open drain mode. */ - if (!powered_resume && !mmc_host_is_spi(host)) { + if (!mmc_host_is_spi(host)) { err = mmc_send_relative_addr(host, &card->rca); if (err) goto remove; @@ -687,7 +685,7 @@ try_again: /* * Select card, as all following commands rely on that. */ - if (!powered_resume && !mmc_host_is_spi(host)) { + if (!mmc_host_is_spi(host)) { err = mmc_select_card(card); if (err) goto remove; @@ -816,10 +814,27 @@ err: return err; } -static int mmc_sdio_reinit_card(struct mmc_host *host, bool powered_resume) +static int mmc_sdio_reinit_card(struct mmc_host *host) { int ret; + /* + * Reset the card by performing the same steps that are taken by + * mmc_rescan_try_freq() and mmc_attach_sdio() during a "normal" probe. + * + * sdio_reset() is technically not needed. Having just powered up the + * hardware, it should already be in reset state. However, some + * platforms (such as SD8686 on OLPC) do not instantly cut power, + * meaning that a reset is required when restoring power soon after + * powering off. It is harmless in other cases. + * + * The CMD5 reset (mmc_send_io_op_cond()), according to the SDIO spec, + * is not necessary for non-removable cards. However, it is required + * for OLPC SD8686 (which expects a [CMD5,5,3,7] init sequence), and + * harmless in other situations. + * + */ + sdio_reset(host); mmc_go_idle(host); mmc_send_if_cond(host, host->card->ocr); @@ -828,8 +843,7 @@ static int mmc_sdio_reinit_card(struct mmc_host *host, bool powered_resume) if (ret) return ret; - return mmc_sdio_init_card(host, host->card->ocr, host->card, - powered_resume); + return mmc_sdio_init_card(host, host->card->ocr, host->card); } /* @@ -965,7 +979,11 @@ static int mmc_sdio_resume(struct mmc_host *host) /* Basic card reinitialization. */ mmc_claim_host(host); - /* Restore power if needed */ + /* + * Restore power and reinitialize the card when needed. Note that a + * removable card is checked from a detect work later on in the resume + * process. + */ if (!mmc_card_keep_power(host)) { mmc_power_up(host, host->card->ocr); /* @@ -979,12 +997,8 @@ static int mmc_sdio_resume(struct mmc_host *host) pm_runtime_set_active(&host->card->dev); pm_runtime_enable(&host->card->dev); } - } - - /* No need to reinitialize powered-resumed nonremovable cards */ - if (mmc_card_is_removable(host) || !mmc_card_keep_power(host)) { - err = mmc_sdio_reinit_card(host, mmc_card_keep_power(host)); - } else if (mmc_card_keep_power(host) && mmc_card_wake_sdio_irq(host)) { + err = mmc_sdio_reinit_card(host); + } else if (mmc_card_wake_sdio_irq(host)) { /* We may have switched to 1-bit mode during suspend */ err = sdio_enable_4bit_bus(host->card); } @@ -1009,38 +1023,6 @@ out: return err; } -static int mmc_sdio_power_restore(struct mmc_host *host) -{ - int ret; - - /* - * Reset the card by performing the same steps that are taken by - * mmc_rescan_try_freq() and mmc_attach_sdio() during a "normal" probe. - * - * sdio_reset() is technically not needed. Having just powered up the - * hardware, it should already be in reset state. However, some - * platforms (such as SD8686 on OLPC) do not instantly cut power, - * meaning that a reset is required when restoring power soon after - * powering off. It is harmless in other cases. - * - * The CMD5 reset (mmc_send_io_op_cond()), according to the SDIO spec, - * is not necessary for non-removable cards. However, it is required - * for OLPC SD8686 (which expects a [CMD5,5,3,7] init sequence), and - * harmless in other situations. - * - */ - - mmc_claim_host(host); - - ret = mmc_sdio_reinit_card(host, mmc_card_keep_power(host)); - if (!ret && host->sdio_irqs) - mmc_signal_sdio_irq(host); - - mmc_release_host(host); - - return ret; -} - static int mmc_sdio_runtime_suspend(struct mmc_host *host) { /* No references to the card, cut the power to it. */ @@ -1058,7 +1040,7 @@ static int mmc_sdio_runtime_resume(struct mmc_host *host) /* Restore power and re-initialize. */ mmc_claim_host(host); mmc_power_up(host, host->card->ocr); - ret = mmc_sdio_power_restore(host); + ret = mmc_sdio_reinit_card(host); mmc_release_host(host); return ret; @@ -1067,7 +1049,7 @@ static int mmc_sdio_runtime_resume(struct mmc_host *host) static int mmc_sdio_hw_reset(struct mmc_host *host) { mmc_power_cycle(host, host->card->ocr); - return mmc_sdio_power_restore(host); + return mmc_sdio_reinit_card(host); } static int mmc_sdio_sw_reset(struct mmc_host *host) @@ -1079,7 +1061,7 @@ static int mmc_sdio_sw_reset(struct mmc_host *host) mmc_set_initial_state(host); mmc_set_initial_signal_voltage(host); - return mmc_sdio_reinit_card(host, 0); + return mmc_sdio_reinit_card(host); } static const struct mmc_bus_ops mmc_sdio_ops = { @@ -1129,7 +1111,7 @@ int mmc_attach_sdio(struct mmc_host *host) /* * Detect and init the card. */ - err = mmc_sdio_init_card(host, rocr, NULL, 0); + err = mmc_sdio_init_card(host, rocr, NULL); if (err) goto err; diff --git a/drivers/mmc/core/sdio_irq.c b/drivers/mmc/core/sdio_irq.c index 9f54a259a1b3..0bcc5e83bd1a 100644 --- a/drivers/mmc/core/sdio_irq.c +++ b/drivers/mmc/core/sdio_irq.c @@ -92,7 +92,7 @@ static int process_sdio_pending_irqs(struct mmc_host *host) return ret; } -void sdio_run_irqs(struct mmc_host *host) +static void sdio_run_irqs(struct mmc_host *host) { mmc_claim_host(host); if (host->sdio_irqs) { @@ -103,7 +103,6 @@ void sdio_run_irqs(struct mmc_host *host) } mmc_release_host(host); } -EXPORT_SYMBOL_GPL(sdio_run_irqs); void sdio_irq_work(struct work_struct *work) { diff --git a/drivers/mmc/host/Kconfig b/drivers/mmc/host/Kconfig index 931770f17087..14d89a108edd 100644 --- a/drivers/mmc/host/Kconfig +++ b/drivers/mmc/host/Kconfig @@ -996,7 +996,7 @@ config MMC_SDHCI_OMAP config MMC_SDHCI_AM654 tristate "Support for the SDHCI Controller in TI's AM654 SOCs" - depends on MMC_SDHCI_PLTFM && OF + depends on MMC_SDHCI_PLTFM && OF && REGMAP_MMIO select MMC_SDHCI_IO_ACCESSORS help This selects the Secure Digital Host Controller Interface (SDHCI) diff --git a/drivers/mmc/host/alcor.c b/drivers/mmc/host/alcor.c index e481535cba2b..1aee485d56d4 100644 --- a/drivers/mmc/host/alcor.c +++ b/drivers/mmc/host/alcor.c @@ -672,7 +672,7 @@ static void alcor_set_clock(struct alcor_sdmmc_host *host, unsigned int clock) tmp_clock = DIV_ROUND_UP(cfg->clk_src_freq, tmp_div); tmp_diff = abs(clock - tmp_clock); - if (tmp_diff >= 0 && tmp_diff < diff) { + if (tmp_diff < diff) { diff = tmp_diff; clk_src = cfg->clk_src_reg; clk_div = tmp_div; diff --git a/drivers/mmc/host/android-goldfish.c b/drivers/mmc/host/android-goldfish.c index 11a208cfba04..914e17bab3be 100644 --- a/drivers/mmc/host/android-goldfish.c +++ b/drivers/mmc/host/android-goldfish.c @@ -110,7 +110,6 @@ struct goldfish_mmc_host { struct mmc_request *mrq; struct mmc_command *cmd; struct mmc_data *data; - struct mmc_host *mmc; struct device *dev; unsigned char id; /* 16xx chips have 2 MMC blocks */ void *virt_base; @@ -172,7 +171,7 @@ goldfish_mmc_start_command(struct goldfish_mmc_host *host, struct mmc_command *c resptype = 3; break; default: - dev_err(mmc_dev(host->mmc), + dev_err(mmc_dev(mmc_from_priv(host)), "Invalid response type: %04x\n", mmc_resp_type(cmd)); break; } @@ -218,8 +217,8 @@ static void goldfish_mmc_xfer_done(struct goldfish_mmc_host *host, data->sg->length); } host->data->bytes_xfered += data->sg->length; - dma_unmap_sg(mmc_dev(host->mmc), data->sg, host->sg_len, - dma_data_dir); + dma_unmap_sg(mmc_dev(mmc_from_priv(host)), data->sg, + host->sg_len, dma_data_dir); } host->data = NULL; @@ -233,7 +232,7 @@ static void goldfish_mmc_xfer_done(struct goldfish_mmc_host *host, if (!data->stop) { host->mrq = NULL; - mmc_request_done(host->mmc, data->mrq); + mmc_request_done(mmc_from_priv(host), data->mrq); return; } @@ -275,7 +274,7 @@ static void goldfish_mmc_cmd_done(struct goldfish_mmc_host *host, if (host->data == NULL || cmd->error) { host->mrq = NULL; - mmc_request_done(host->mmc, cmd->mrq); + mmc_request_done(mmc_from_priv(host), cmd->mrq); } } @@ -310,7 +309,7 @@ static irqreturn_t goldfish_mmc_irq(int irq, void *dev_id) struct mmc_request *mrq = host->mrq; mrq->cmd->error = -ETIMEDOUT; host->mrq = NULL; - mmc_request_done(host->mmc, mrq); + mmc_request_done(mmc_from_priv(host), mrq); } if (end_command) @@ -336,12 +335,13 @@ static irqreturn_t goldfish_mmc_irq(int irq, void *dev_id) u32 state = GOLDFISH_MMC_READ(host, MMC_STATE); pr_info("%s: Card detect now %d\n", __func__, (state & MMC_STATE_INSERTED)); - mmc_detect_change(host->mmc, 0); + mmc_detect_change(mmc_from_priv(host), 0); } if (!end_command && !end_transfer && !state_changed && !cmd_timeout) { status = GOLDFISH_MMC_READ(host, MMC_INT_STATUS); - dev_info(mmc_dev(host->mmc),"spurious irq 0x%04x\n", status); + dev_info(mmc_dev(mmc_from_priv(host)), "spurious irq 0x%04x\n", + status); if (status != 0) { GOLDFISH_MMC_WRITE(host, MMC_INT_STATUS, status); GOLDFISH_MMC_WRITE(host, MMC_INT_ENABLE, 0); @@ -380,7 +380,7 @@ static void goldfish_mmc_prepare_data(struct goldfish_mmc_host *host, dma_data_dir = mmc_get_dma_dir(data); - host->sg_len = dma_map_sg(mmc_dev(host->mmc), data->sg, + host->sg_len = dma_map_sg(mmc_dev(mmc_from_priv(host)), data->sg, sg_len, dma_data_dir); host->dma_done = 0; host->dma_in_use = 1; @@ -458,7 +458,6 @@ static int goldfish_mmc_probe(struct platform_device *pdev) } host = mmc_priv(mmc); - host->mmc = mmc; pr_err("mmc: Mapping %lX to %lX\n", (long)res->start, (long)res->end); host->reg_base = ioremap(res->start, resource_size(res)); @@ -505,8 +504,7 @@ static int goldfish_mmc_probe(struct platform_device *pdev) ret = device_create_file(&pdev->dev, &dev_attr_cover_switch); if (ret) - dev_warn(mmc_dev(host->mmc), - "Unable to create sysfs attributes\n"); + dev_warn(mmc_dev(mmc), "Unable to create sysfs attributes\n"); GOLDFISH_MMC_WRITE(host, MMC_SET_BUFFER, host->phys_base); GOLDFISH_MMC_WRITE(host, MMC_INT_ENABLE, @@ -522,7 +520,7 @@ err_request_irq_failed: dma_alloc_failed: iounmap(host->reg_base); ioremap_failed: - mmc_free_host(host->mmc); + mmc_free_host(mmc); err_alloc_host_failed: return ret; } @@ -530,14 +528,15 @@ err_alloc_host_failed: static int goldfish_mmc_remove(struct platform_device *pdev) { struct goldfish_mmc_host *host = platform_get_drvdata(pdev); + struct mmc_host *mmc = mmc_from_priv(host); BUG_ON(host == NULL); - mmc_remove_host(host->mmc); + mmc_remove_host(mmc); free_irq(host->irq, host); dma_free_coherent(&pdev->dev, BUFFER_SIZE, host->virt_base, host->phys_base); iounmap(host->reg_base); - mmc_free_host(host->mmc); + mmc_free_host(mmc); return 0; } diff --git a/drivers/mmc/host/atmel-mci.c b/drivers/mmc/host/atmel-mci.c index 392a1f87c638..9ee0bc0ce6d0 100644 --- a/drivers/mmc/host/atmel-mci.c +++ b/drivers/mmc/host/atmel-mci.c @@ -576,42 +576,18 @@ static void atmci_init_debugfs(struct atmel_mci_slot *slot) struct mmc_host *mmc = slot->mmc; struct atmel_mci *host = slot->host; struct dentry *root; - struct dentry *node; root = mmc->debugfs_root; if (!root) return; - node = debugfs_create_file("regs", S_IRUSR, root, host, - &atmci_regs_fops); - if (IS_ERR(node)) - return; - if (!node) - goto err; - - node = debugfs_create_file("req", S_IRUSR, root, slot, - &atmci_req_fops); - if (!node) - goto err; - - node = debugfs_create_u32("state", S_IRUSR, root, (u32 *)&host->state); - if (!node) - goto err; - - node = debugfs_create_x32("pending_events", S_IRUSR, root, - (u32 *)&host->pending_events); - if (!node) - goto err; - - node = debugfs_create_x32("completed_events", S_IRUSR, root, - (u32 *)&host->completed_events); - if (!node) - goto err; - - return; - -err: - dev_err(&mmc->class_dev, "failed to initialize debugfs for slot\n"); + debugfs_create_file("regs", S_IRUSR, root, host, &atmci_regs_fops); + debugfs_create_file("req", S_IRUSR, root, slot, &atmci_req_fops); + debugfs_create_u32("state", S_IRUSR, root, (u32 *)&host->state); + debugfs_create_x32("pending_events", S_IRUSR, root, + (u32 *)&host->pending_events); + debugfs_create_x32("completed_events", S_IRUSR, root, + (u32 *)&host->completed_events); } #if defined(CONFIG_OF) diff --git a/drivers/mmc/host/dw_mmc.c b/drivers/mmc/host/dw_mmc.c index b53b6b7d4dd4..faaaf52a46d2 100644 --- a/drivers/mmc/host/dw_mmc.c +++ b/drivers/mmc/host/dw_mmc.c @@ -169,40 +169,18 @@ static void dw_mci_init_debugfs(struct dw_mci_slot *slot) struct mmc_host *mmc = slot->mmc; struct dw_mci *host = slot->host; struct dentry *root; - struct dentry *node; root = mmc->debugfs_root; if (!root) return; - node = debugfs_create_file("regs", S_IRUSR, root, host, - &dw_mci_regs_fops); - if (!node) - goto err; - - node = debugfs_create_file("req", S_IRUSR, root, slot, - &dw_mci_req_fops); - if (!node) - goto err; - - node = debugfs_create_u32("state", S_IRUSR, root, (u32 *)&host->state); - if (!node) - goto err; - - node = debugfs_create_x32("pending_events", S_IRUSR, root, - (u32 *)&host->pending_events); - if (!node) - goto err; - - node = debugfs_create_x32("completed_events", S_IRUSR, root, - (u32 *)&host->completed_events); - if (!node) - goto err; - - return; - -err: - dev_err(&mmc->class_dev, "failed to initialize debugfs for slot\n"); + debugfs_create_file("regs", S_IRUSR, root, host, &dw_mci_regs_fops); + debugfs_create_file("req", S_IRUSR, root, slot, &dw_mci_req_fops); + debugfs_create_u32("state", S_IRUSR, root, (u32 *)&host->state); + debugfs_create_x32("pending_events", S_IRUSR, root, + (u32 *)&host->pending_events); + debugfs_create_x32("completed_events", S_IRUSR, root, + (u32 *)&host->completed_events); } #endif /* defined(CONFIG_DEBUG_FS) */ diff --git a/drivers/mmc/host/meson-gx-mmc.c b/drivers/mmc/host/meson-gx-mmc.c index fb842255de49..037311db3551 100644 --- a/drivers/mmc/host/meson-gx-mmc.c +++ b/drivers/mmc/host/meson-gx-mmc.c @@ -116,6 +116,9 @@ #define SD_EMMC_TXD 0x94 #define SD_EMMC_LAST_REG SD_EMMC_TXD +#define SD_EMMC_SRAM_DATA_BUF_LEN 1536 +#define SD_EMMC_SRAM_DATA_BUF_OFF 0x200 + #define SD_EMMC_CFG_BLK_SIZE 512 /* internal buffer max: 512 bytes */ #define SD_EMMC_CFG_RESP_TIMEOUT 256 /* in clock cycles */ #define SD_EMMC_CMD_TIMEOUT 1024 /* in ms */ @@ -155,6 +158,8 @@ struct meson_host { unsigned long req_rate; bool ddr; + bool dram_access_quirk; + struct pinctrl *pinctrl; struct pinctrl_state *pins_default; struct pinctrl_state *pins_clk_gate; @@ -219,12 +224,21 @@ static struct mmc_command *meson_mmc_get_next_command(struct mmc_command *cmd) static void meson_mmc_get_transfer_mode(struct mmc_host *mmc, struct mmc_request *mrq) { + struct meson_host *host = mmc_priv(mmc); struct mmc_data *data = mrq->data; struct scatterlist *sg; int i; bool use_desc_chain_mode = true; /* + * When Controller DMA cannot directly access DDR memory, disable + * support for Chain Mode to directly use the internal SRAM using + * the bounce buffer mode. + */ + if (host->dram_access_quirk) + return; + + /* * Broken SDIO with AP6255-based WiFi on Khadas VIM Pro has been * reported. For some strange reason this occurs in descriptor * chain mode only. So let's fall back to bounce buffer mode @@ -1036,6 +1050,10 @@ static int meson_mmc_probe(struct platform_device *pdev) host->dev = &pdev->dev; dev_set_drvdata(&pdev->dev, host); + /* The G12A SDIO Controller needs an SRAM bounce buffer */ + host->dram_access_quirk = device_property_read_bool(&pdev->dev, + "amlogic,dram-access-quirk"); + /* Get regulators and the supported OCR mask */ host->vqmmc_enabled = false; ret = mmc_regulator_get_supply(mmc); @@ -1133,9 +1151,16 @@ static int meson_mmc_probe(struct platform_device *pdev) goto err_init_clk; mmc->caps |= MMC_CAP_CMD23; - mmc->max_blk_count = CMD_CFG_LENGTH_MASK; + if (host->dram_access_quirk) { + /* Limit to the available sram memory */ + mmc->max_segs = SD_EMMC_SRAM_DATA_BUF_LEN / mmc->max_blk_size; + mmc->max_blk_count = mmc->max_segs; + } else { + mmc->max_blk_count = CMD_CFG_LENGTH_MASK; + mmc->max_segs = SD_EMMC_DESC_BUF_LEN / + sizeof(struct sd_emmc_desc); + } mmc->max_req_size = mmc->max_blk_count * mmc->max_blk_size; - mmc->max_segs = SD_EMMC_DESC_BUF_LEN / sizeof(struct sd_emmc_desc); mmc->max_seg_size = mmc->max_req_size; /* @@ -1145,15 +1170,27 @@ static int meson_mmc_probe(struct platform_device *pdev) */ mmc->caps2 &= ~MMC_CAP2_HS400; - /* data bounce buffer */ - host->bounce_buf_size = mmc->max_req_size; - host->bounce_buf = - dma_alloc_coherent(host->dev, host->bounce_buf_size, - &host->bounce_dma_addr, GFP_KERNEL); - if (host->bounce_buf == NULL) { - dev_err(host->dev, "Unable to map allocate DMA bounce buffer.\n"); - ret = -ENOMEM; - goto err_free_irq; + if (host->dram_access_quirk) { + /* + * The MMC Controller embeds 1,5KiB of internal SRAM + * that can be used to be used as bounce buffer. + * In the case of the G12A SDIO controller, use these + * instead of the DDR memory + */ + host->bounce_buf_size = SD_EMMC_SRAM_DATA_BUF_LEN; + host->bounce_buf = host->regs + SD_EMMC_SRAM_DATA_BUF_OFF; + host->bounce_dma_addr = res->start + SD_EMMC_SRAM_DATA_BUF_OFF; + } else { + /* data bounce buffer */ + host->bounce_buf_size = mmc->max_req_size; + host->bounce_buf = + dma_alloc_coherent(host->dev, host->bounce_buf_size, + &host->bounce_dma_addr, GFP_KERNEL); + if (host->bounce_buf == NULL) { + dev_err(host->dev, "Unable to map allocate DMA bounce buffer.\n"); + ret = -ENOMEM; + goto err_free_irq; + } } host->descs = dma_alloc_coherent(host->dev, SD_EMMC_DESC_BUF_LEN, @@ -1170,8 +1207,9 @@ static int meson_mmc_probe(struct platform_device *pdev) return 0; err_bounce_buf: - dma_free_coherent(host->dev, host->bounce_buf_size, - host->bounce_buf, host->bounce_dma_addr); + if (!host->dram_access_quirk) + dma_free_coherent(host->dev, host->bounce_buf_size, + host->bounce_buf, host->bounce_dma_addr); err_free_irq: free_irq(host->irq, host); err_init_clk: @@ -1195,8 +1233,10 @@ static int meson_mmc_remove(struct platform_device *pdev) dma_free_coherent(host->dev, SD_EMMC_DESC_BUF_LEN, host->descs, host->descs_dma_addr); - dma_free_coherent(host->dev, host->bounce_buf_size, - host->bounce_buf, host->bounce_dma_addr); + + if (!host->dram_access_quirk) + dma_free_coherent(host->dev, host->bounce_buf_size, + host->bounce_buf, host->bounce_dma_addr); clk_disable_unprepare(host->mmc_clk); clk_disable_unprepare(host->core_clk); diff --git a/drivers/mmc/host/renesas_sdhi_core.c b/drivers/mmc/host/renesas_sdhi_core.c index 5f8d57ac084f..64d3b5fb7fe5 100644 --- a/drivers/mmc/host/renesas_sdhi_core.c +++ b/drivers/mmc/host/renesas_sdhi_core.c @@ -610,13 +610,12 @@ static void renesas_sdhi_enable_dma(struct tmio_mmc_host *host, bool enable) renesas_sdhi_sdbuf_width(host, enable ? width : 16); } -static const struct renesas_sdhi_quirks sdhi_quirks_h3_m3w_es1 = { +static const struct renesas_sdhi_quirks sdhi_quirks_4tap_nohs400 = { .hs400_disabled = true, .hs400_4taps = true, }; -static const struct renesas_sdhi_quirks sdhi_quirks_h3_es2 = { - .hs400_disabled = false, +static const struct renesas_sdhi_quirks sdhi_quirks_4tap = { .hs400_4taps = true, }; @@ -625,10 +624,10 @@ static const struct renesas_sdhi_quirks sdhi_quirks_nohs400 = { }; static const struct soc_device_attribute sdhi_quirks_match[] = { - { .soc_id = "r8a7795", .revision = "ES1.*", .data = &sdhi_quirks_h3_m3w_es1 }, - { .soc_id = "r8a7795", .revision = "ES2.0", .data = &sdhi_quirks_h3_es2 }, - { .soc_id = "r8a7796", .revision = "ES1.[012]", .data = &sdhi_quirks_h3_m3w_es1 }, - { .soc_id = "r8a774a1", .revision = "ES1.[012]", .data = &sdhi_quirks_h3_m3w_es1 }, + { .soc_id = "r8a7795", .revision = "ES1.*", .data = &sdhi_quirks_4tap_nohs400 }, + { .soc_id = "r8a7795", .revision = "ES2.0", .data = &sdhi_quirks_4tap }, + { .soc_id = "r8a7796", .revision = "ES1.[012]", .data = &sdhi_quirks_4tap_nohs400 }, + { .soc_id = "r8a774a1", .revision = "ES1.[012]", .data = &sdhi_quirks_4tap_nohs400 }, { .soc_id = "r8a77980", .data = &sdhi_quirks_nohs400 }, { /* Sentinel. */ }, }; @@ -775,6 +774,8 @@ int renesas_sdhi_probe(struct platform_device *pdev, /* All SDHI have SDIO status bits which must be 1 */ mmc_data->flags |= TMIO_MMC_SDIO_STATUS_SETBITS; + pm_runtime_enable(&pdev->dev); + ret = renesas_sdhi_clk_enable(host); if (ret) goto efree; @@ -855,6 +856,8 @@ edisclk: efree: tmio_mmc_host_free(host); + pm_runtime_disable(&pdev->dev); + return ret; } EXPORT_SYMBOL_GPL(renesas_sdhi_probe); @@ -866,6 +869,8 @@ int renesas_sdhi_remove(struct platform_device *pdev) tmio_mmc_host_remove(host); renesas_sdhi_clk_disable(host); + pm_runtime_disable(&pdev->dev); + return 0; } EXPORT_SYMBOL_GPL(renesas_sdhi_remove); diff --git a/drivers/mmc/host/s3cmci.c b/drivers/mmc/host/s3cmci.c index b1d3f8288732..ccc5f095775f 100644 --- a/drivers/mmc/host/s3cmci.c +++ b/drivers/mmc/host/s3cmci.c @@ -1449,33 +1449,18 @@ DEFINE_SHOW_ATTRIBUTE(s3cmci_regs); static void s3cmci_debugfs_attach(struct s3cmci_host *host) { struct device *dev = &host->pdev->dev; + struct dentry *root; - host->debug_root = debugfs_create_dir(dev_name(dev), NULL); - if (IS_ERR(host->debug_root)) { - dev_err(dev, "failed to create debugfs root\n"); - return; - } - - host->debug_state = debugfs_create_file("state", 0444, - host->debug_root, host, - &s3cmci_state_fops); - - if (IS_ERR(host->debug_state)) - dev_err(dev, "failed to create debug state file\n"); - - host->debug_regs = debugfs_create_file("regs", 0444, - host->debug_root, host, - &s3cmci_regs_fops); + root = debugfs_create_dir(dev_name(dev), NULL); + host->debug_root = root; - if (IS_ERR(host->debug_regs)) - dev_err(dev, "failed to create debug regs file\n"); + debugfs_create_file("state", 0444, root, host, &s3cmci_state_fops); + debugfs_create_file("regs", 0444, root, host, &s3cmci_regs_fops); } static void s3cmci_debugfs_remove(struct s3cmci_host *host) { - debugfs_remove(host->debug_regs); - debugfs_remove(host->debug_state); - debugfs_remove(host->debug_root); + debugfs_remove_recursive(host->debug_root); } #else diff --git a/drivers/mmc/host/s3cmci.h b/drivers/mmc/host/s3cmci.h index 7ca1d9d639c4..8b65d7ad9f97 100644 --- a/drivers/mmc/host/s3cmci.h +++ b/drivers/mmc/host/s3cmci.h @@ -67,8 +67,6 @@ struct s3cmci_host { #ifdef CONFIG_DEBUG_FS struct dentry *debug_root; - struct dentry *debug_state; - struct dentry *debug_regs; #endif #ifdef CONFIG_ARM_S3C24XX_CPUFREQ diff --git a/drivers/mmc/host/sdhci-msm.c b/drivers/mmc/host/sdhci-msm.c index 5fc76a1993d0..9cf14b359c14 100644 --- a/drivers/mmc/host/sdhci-msm.c +++ b/drivers/mmc/host/sdhci-msm.c @@ -575,11 +575,14 @@ static int msm_init_cm_dll(struct sdhci_host *host) struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host); struct sdhci_msm_host *msm_host = sdhci_pltfm_priv(pltfm_host); int wait_cnt = 50; - unsigned long flags; + unsigned long flags, xo_clk = 0; u32 config; const struct sdhci_msm_offset *msm_offset = msm_host->offset; + if (msm_host->use_14lpp_dll_reset && !IS_ERR_OR_NULL(msm_host->xo_clk)) + xo_clk = clk_get_rate(msm_host->xo_clk); + spin_lock_irqsave(&host->lock, flags); /* @@ -627,10 +630,10 @@ static int msm_init_cm_dll(struct sdhci_host *host) config &= CORE_FLL_CYCLE_CNT; if (config) mclk_freq = DIV_ROUND_CLOSEST_ULL((host->clock * 8), - clk_get_rate(msm_host->xo_clk)); + xo_clk); else mclk_freq = DIV_ROUND_CLOSEST_ULL((host->clock * 4), - clk_get_rate(msm_host->xo_clk)); + xo_clk); config = readl_relaxed(host->ioaddr + msm_offset->core_dll_config_2); diff --git a/drivers/mmc/host/sdhci-of-esdhc.c b/drivers/mmc/host/sdhci-of-esdhc.c index 68c5866f5c85..4dd43b1adf2c 100644 --- a/drivers/mmc/host/sdhci-of-esdhc.c +++ b/drivers/mmc/host/sdhci-of-esdhc.c @@ -830,9 +830,17 @@ static int esdhc_execute_tuning(struct mmc_host *mmc, u32 opcode) struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host); struct sdhci_esdhc *esdhc = sdhci_pltfm_priv(pltfm_host); bool hs400_tuning; + unsigned int clk; u32 val; int ret; + /* For tuning mode, the sd clock divisor value + * must be larger than 3 according to reference manual. + */ + clk = esdhc->peripheral_clock / 3; + if (host->clock > clk) + esdhc_of_set_clock(host, clk); + if (esdhc->quirk_limited_clk_division && host->flags & SDHCI_HS400_TUNING) esdhc_of_set_clock(host, host->clock); @@ -1040,11 +1048,12 @@ static void esdhc_init(struct platform_device *pdev, struct sdhci_host *host) /* * esdhc->peripheral_clock would be assigned with a value * which is eSDHC base clock when use periperal clock. - * For ls1046a, the clock value got by common clk API is - * peripheral clock while the eSDHC base clock is 1/2 - * peripheral clock. + * For some platforms, the clock value got by common clk + * API is peripheral clock while the eSDHC base clock is + * 1/2 peripheral clock. */ - if (of_device_is_compatible(np, "fsl,ls1046a-esdhc")) + if (of_device_is_compatible(np, "fsl,ls1046a-esdhc") || + of_device_is_compatible(np, "fsl,ls1028a-esdhc")) esdhc->peripheral_clock = clk_get_rate(clk) / 2; else esdhc->peripheral_clock = clk_get_rate(clk); diff --git a/drivers/mmc/host/sdhci-pci-core.c b/drivers/mmc/host/sdhci-pci-core.c index 4154ee11b47d..4041878eb0f3 100644 --- a/drivers/mmc/host/sdhci-pci-core.c +++ b/drivers/mmc/host/sdhci-pci-core.c @@ -1668,6 +1668,8 @@ static const struct pci_device_id pci_ids[] = { SDHCI_PCI_DEVICE(INTEL, CNPH_SD, intel_byt_sd), SDHCI_PCI_DEVICE(INTEL, ICP_EMMC, intel_glk_emmc), SDHCI_PCI_DEVICE(INTEL, ICP_SD, intel_byt_sd), + SDHCI_PCI_DEVICE(INTEL, EHL_EMMC, intel_glk_emmc), + SDHCI_PCI_DEVICE(INTEL, EHL_SD, intel_byt_sd), SDHCI_PCI_DEVICE(INTEL, CML_EMMC, intel_glk_emmc), SDHCI_PCI_DEVICE(INTEL, CML_SD, intel_byt_sd), SDHCI_PCI_DEVICE(O2, 8120, o2), @@ -2040,8 +2042,6 @@ static int sdhci_pci_probe(struct pci_dev *pdev, slots = PCI_SLOT_INFO_SLOTS(slots) + 1; dev_dbg(&pdev->dev, "found %d slot(s)\n", slots); - if (slots == 0) - return -ENODEV; BUG_ON(slots > MAX_SLOTS); diff --git a/drivers/mmc/host/sdhci-pci-o2micro.c b/drivers/mmc/host/sdhci-pci-o2micro.c index dd21315922c8..9dc4548271b4 100644 --- a/drivers/mmc/host/sdhci-pci-o2micro.c +++ b/drivers/mmc/host/sdhci-pci-o2micro.c @@ -395,11 +395,21 @@ int sdhci_pci_o2_probe_slot(struct sdhci_pci_slot *slot) { struct sdhci_pci_chip *chip; struct sdhci_host *host; - u32 reg; + u32 reg, caps; int ret; chip = slot->chip; host = slot->host; + + caps = sdhci_readl(host, SDHCI_CAPABILITIES); + + /* + * mmc_select_bus_width() will test the bus to determine the actual bus + * width. + */ + if (caps & SDHCI_CAN_DO_8BIT) + host->mmc->caps |= MMC_CAP_8_BIT_DATA; + switch (chip->pdev->device) { case PCI_DEVICE_ID_O2_SDS0: case PCI_DEVICE_ID_O2_SEABIRD0: diff --git a/drivers/mmc/host/sdhci-pci.h b/drivers/mmc/host/sdhci-pci.h index e5dc6e44c7a4..cdd15f357d01 100644 --- a/drivers/mmc/host/sdhci-pci.h +++ b/drivers/mmc/host/sdhci-pci.h @@ -50,6 +50,8 @@ #define PCI_DEVICE_ID_INTEL_CNPH_SD 0xa375 #define PCI_DEVICE_ID_INTEL_ICP_EMMC 0x34c4 #define PCI_DEVICE_ID_INTEL_ICP_SD 0x34f8 +#define PCI_DEVICE_ID_INTEL_EHL_EMMC 0x4b47 +#define PCI_DEVICE_ID_INTEL_EHL_SD 0x4b48 #define PCI_DEVICE_ID_INTEL_CML_EMMC 0x02c4 #define PCI_DEVICE_ID_INTEL_CML_SD 0x02f5 diff --git a/drivers/mmc/host/sdhci-sprd.c b/drivers/mmc/host/sdhci-sprd.c index 9a822e2e9f0b..6ee340a3fb3a 100644 --- a/drivers/mmc/host/sdhci-sprd.c +++ b/drivers/mmc/host/sdhci-sprd.c @@ -12,6 +12,7 @@ #include <linux/of.h> #include <linux/of_device.h> #include <linux/of_gpio.h> +#include <linux/pinctrl/consumer.h> #include <linux/platform_device.h> #include <linux/pm_runtime.h> #include <linux/regulator/consumer.h> @@ -22,6 +23,15 @@ /* SDHCI_ARGUMENT2 register high 16bit */ #define SDHCI_SPRD_ARG2_STUFF GENMASK(31, 16) +#define SDHCI_SPRD_REG_32_DLL_CFG 0x200 +#define SDHCI_SPRD_DLL_ALL_CPST_EN (BIT(18) | BIT(24) | BIT(25) | BIT(26) | BIT(27)) +#define SDHCI_SPRD_DLL_EN BIT(21) +#define SDHCI_SPRD_DLL_SEARCH_MODE BIT(16) +#define SDHCI_SPRD_DLL_INIT_COUNT 0xc00 +#define SDHCI_SPRD_DLL_PHASE_INTERNAL 0x3 + +#define SDHCI_SPRD_REG_32_DLL_DLY 0x204 + #define SDHCI_SPRD_REG_32_DLL_DLY_OFFSET 0x208 #define SDHCIBSPRD_IT_WR_DLY_INV BIT(5) #define SDHCI_SPRD_BIT_CMD_DLY_INV BIT(13) @@ -41,6 +51,7 @@ /* SDHCI_HOST_CONTROL2 */ #define SDHCI_SPRD_CTRL_HS200 0x0005 #define SDHCI_SPRD_CTRL_HS400 0x0006 +#define SDHCI_SPRD_CTRL_HS400ES 0x0007 /* * According to the standard specification, BIT(3) of SDHCI_SOFTWARE_RESET is @@ -55,13 +66,36 @@ #define SDHCI_SPRD_CLK_MAX_DIV 1023 #define SDHCI_SPRD_CLK_DEF_RATE 26000000 +#define SDHCI_SPRD_PHY_DLL_CLK 52000000 struct sdhci_sprd_host { u32 version; struct clk *clk_sdio; struct clk *clk_enable; + struct clk *clk_2x_enable; + struct pinctrl *pinctrl; + struct pinctrl_state *pins_uhs; + struct pinctrl_state *pins_default; u32 base_rate; int flags; /* backup of host attribute */ + u32 phy_delay[MMC_TIMING_MMC_HS400 + 2]; +}; + +struct sdhci_sprd_phy_cfg { + const char *property; + u8 timing; +}; + +static const struct sdhci_sprd_phy_cfg sdhci_sprd_phy_cfgs[] = { + { "sprd,phy-delay-legacy", MMC_TIMING_LEGACY, }, + { "sprd,phy-delay-sd-highspeed", MMC_TIMING_SD_HS, }, + { "sprd,phy-delay-sd-uhs-sdr50", MMC_TIMING_UHS_SDR50, }, + { "sprd,phy-delay-sd-uhs-sdr104", MMC_TIMING_UHS_SDR104, }, + { "sprd,phy-delay-mmc-highspeed", MMC_TIMING_MMC_HS, }, + { "sprd,phy-delay-mmc-ddr52", MMC_TIMING_MMC_DDR52, }, + { "sprd,phy-delay-mmc-hs200", MMC_TIMING_MMC_HS200, }, + { "sprd,phy-delay-mmc-hs400", MMC_TIMING_MMC_HS400, }, + { "sprd,phy-delay-mmc-hs400es", MMC_TIMING_MMC_HS400 + 1, }, }; #define TO_SPRD_HOST(host) sdhci_pltfm_priv(sdhci_priv(host)) @@ -131,6 +165,15 @@ static inline void sdhci_sprd_sd_clk_off(struct sdhci_host *host) sdhci_writew(host, ctrl, SDHCI_CLOCK_CONTROL); } +static inline void sdhci_sprd_sd_clk_on(struct sdhci_host *host) +{ + u16 ctrl; + + ctrl = sdhci_readw(host, SDHCI_CLOCK_CONTROL); + ctrl |= SDHCI_CLOCK_CARD_EN; + sdhci_writew(host, ctrl, SDHCI_CLOCK_CONTROL); +} + static inline void sdhci_sprd_set_dll_invert(struct sdhci_host *host, u32 mask, bool en) { @@ -189,9 +232,33 @@ static inline void _sdhci_sprd_set_clock(struct sdhci_host *host, } } +static void sdhci_sprd_enable_phy_dll(struct sdhci_host *host) +{ + u32 tmp; + + tmp = sdhci_readl(host, SDHCI_SPRD_REG_32_DLL_CFG); + tmp &= ~(SDHCI_SPRD_DLL_EN | SDHCI_SPRD_DLL_ALL_CPST_EN); + sdhci_writel(host, tmp, SDHCI_SPRD_REG_32_DLL_CFG); + /* wait 1ms */ + usleep_range(1000, 1250); + + tmp = sdhci_readl(host, SDHCI_SPRD_REG_32_DLL_CFG); + tmp |= SDHCI_SPRD_DLL_ALL_CPST_EN | SDHCI_SPRD_DLL_SEARCH_MODE | + SDHCI_SPRD_DLL_INIT_COUNT | SDHCI_SPRD_DLL_PHASE_INTERNAL; + sdhci_writel(host, tmp, SDHCI_SPRD_REG_32_DLL_CFG); + /* wait 1ms */ + usleep_range(1000, 1250); + + tmp = sdhci_readl(host, SDHCI_SPRD_REG_32_DLL_CFG); + tmp |= SDHCI_SPRD_DLL_EN; + sdhci_writel(host, tmp, SDHCI_SPRD_REG_32_DLL_CFG); + /* wait 1ms */ + usleep_range(1000, 1250); +} + static void sdhci_sprd_set_clock(struct sdhci_host *host, unsigned int clock) { - bool en = false; + bool en = false, clk_changed = false; if (clock == 0) { sdhci_writew(host, 0, SDHCI_CLOCK_CONTROL); @@ -203,9 +270,19 @@ static void sdhci_sprd_set_clock(struct sdhci_host *host, unsigned int clock) en = true; sdhci_sprd_set_dll_invert(host, SDHCI_SPRD_BIT_CMD_DLY_INV | SDHCI_SPRD_BIT_POSRD_DLY_INV, en); + clk_changed = true; } else { _sdhci_sprd_set_clock(host, clock); } + + /* + * According to the Spreadtrum SD host specification, when we changed + * the clock to be more than 52M, we should enable the PHY DLL which + * is used to track the clock frequency to make the clock work more + * stable. Otherwise deviation may occur of the higher clock. + */ + if (clk_changed && clock > SDHCI_SPRD_PHY_DLL_CLK) + sdhci_sprd_enable_phy_dll(host); } static unsigned int sdhci_sprd_get_max_clock(struct sdhci_host *host) @@ -223,6 +300,9 @@ static unsigned int sdhci_sprd_get_min_clock(struct sdhci_host *host) static void sdhci_sprd_set_uhs_signaling(struct sdhci_host *host, unsigned int timing) { + struct sdhci_sprd_host *sprd_host = TO_SPRD_HOST(host); + struct mmc_host *mmc = host->mmc; + u32 *p = sprd_host->phy_delay; u16 ctrl_2; if (timing == host->timing) @@ -261,6 +341,9 @@ static void sdhci_sprd_set_uhs_signaling(struct sdhci_host *host, } sdhci_writew(host, ctrl_2, SDHCI_HOST_CONTROL2); + + if (!mmc->ios.enhanced_strobe) + sdhci_writel(host, p[timing], SDHCI_SPRD_REG_32_DLL_DLY); } static void sdhci_sprd_hw_reset(struct sdhci_host *host) @@ -284,6 +367,12 @@ static void sdhci_sprd_hw_reset(struct sdhci_host *host) usleep_range(300, 500); } +static unsigned int sdhci_sprd_get_max_timeout_count(struct sdhci_host *host) +{ + /* The Spredtrum controller actual maximum timeout count is 1 << 31 */ + return 1 << 31; +} + static struct sdhci_ops sdhci_sprd_ops = { .read_l = sdhci_sprd_readl, .write_l = sdhci_sprd_writel, @@ -295,6 +384,7 @@ static struct sdhci_ops sdhci_sprd_ops = { .reset = sdhci_reset, .set_uhs_signaling = sdhci_sprd_set_uhs_signaling, .hw_reset = sdhci_sprd_hw_reset, + .get_max_timeout_count = sdhci_sprd_get_max_timeout_count, }; static void sdhci_sprd_request(struct mmc_host *mmc, struct mmc_request *mrq) @@ -317,6 +407,99 @@ static void sdhci_sprd_request(struct mmc_host *mmc, struct mmc_request *mrq) sdhci_request(mmc, mrq); } +static int sdhci_sprd_voltage_switch(struct mmc_host *mmc, struct mmc_ios *ios) +{ + struct sdhci_host *host = mmc_priv(mmc); + struct sdhci_sprd_host *sprd_host = TO_SPRD_HOST(host); + int ret; + + if (!IS_ERR(mmc->supply.vqmmc)) { + ret = mmc_regulator_set_vqmmc(mmc, ios); + if (ret) { + pr_err("%s: Switching signalling voltage failed\n", + mmc_hostname(mmc)); + return ret; + } + } + + if (IS_ERR(sprd_host->pinctrl)) + return 0; + + switch (ios->signal_voltage) { + case MMC_SIGNAL_VOLTAGE_180: + ret = pinctrl_select_state(sprd_host->pinctrl, + sprd_host->pins_uhs); + if (ret) { + pr_err("%s: failed to select uhs pin state\n", + mmc_hostname(mmc)); + return ret; + } + break; + + default: + /* fall-through */ + case MMC_SIGNAL_VOLTAGE_330: + ret = pinctrl_select_state(sprd_host->pinctrl, + sprd_host->pins_default); + if (ret) { + pr_err("%s: failed to select default pin state\n", + mmc_hostname(mmc)); + return ret; + } + break; + } + + /* Wait for 300 ~ 500 us for pin state stable */ + usleep_range(300, 500); + sdhci_reset(host, SDHCI_RESET_CMD | SDHCI_RESET_DATA); + + return 0; +} + +static void sdhci_sprd_hs400_enhanced_strobe(struct mmc_host *mmc, + struct mmc_ios *ios) +{ + struct sdhci_host *host = mmc_priv(mmc); + struct sdhci_sprd_host *sprd_host = TO_SPRD_HOST(host); + u32 *p = sprd_host->phy_delay; + u16 ctrl_2; + + if (!ios->enhanced_strobe) + return; + + sdhci_sprd_sd_clk_off(host); + + /* Set HS400 enhanced strobe mode */ + ctrl_2 = sdhci_readw(host, SDHCI_HOST_CONTROL2); + ctrl_2 &= ~SDHCI_CTRL_UHS_MASK; + ctrl_2 |= SDHCI_SPRD_CTRL_HS400ES; + sdhci_writew(host, ctrl_2, SDHCI_HOST_CONTROL2); + + sdhci_sprd_sd_clk_on(host); + + /* Set the PHY DLL delay value for HS400 enhanced strobe mode */ + sdhci_writel(host, p[MMC_TIMING_MMC_HS400 + 1], + SDHCI_SPRD_REG_32_DLL_DLY); +} + +static void sdhci_sprd_phy_param_parse(struct sdhci_sprd_host *sprd_host, + struct device_node *np) +{ + u32 *p = sprd_host->phy_delay; + int ret, i, index; + u32 val[4]; + + for (i = 0; i < ARRAY_SIZE(sdhci_sprd_phy_cfgs); i++) { + ret = of_property_read_u32_array(np, + sdhci_sprd_phy_cfgs[i].property, val, 4); + if (ret) + continue; + + index = sdhci_sprd_phy_cfgs[i].timing; + p[index] = val[0] | (val[1] << 8) | (val[2] << 16) | (val[3] << 24); + } +} + static const struct sdhci_pltfm_data sdhci_sprd_pdata = { .quirks = SDHCI_QUIRK_DATA_TIMEOUT_USES_SDCLK, .quirks2 = SDHCI_QUIRK2_BROKEN_HS200 | @@ -338,6 +521,16 @@ static int sdhci_sprd_probe(struct platform_device *pdev) host->dma_mask = DMA_BIT_MASK(64); pdev->dev.dma_mask = &host->dma_mask; host->mmc_host_ops.request = sdhci_sprd_request; + host->mmc_host_ops.hs400_enhanced_strobe = + sdhci_sprd_hs400_enhanced_strobe; + /* + * We can not use the standard ops to change and detect the voltage + * signal for Spreadtrum SD host controller, since our voltage regulator + * for I/O is fixed in hardware, that means we do not need control + * the standard SD host controller to change the I/O voltage. + */ + host->mmc_host_ops.start_signal_voltage_switch = + sdhci_sprd_voltage_switch; host->mmc->caps = MMC_CAP_SD_HIGHSPEED | MMC_CAP_MMC_HIGHSPEED | MMC_CAP_ERASE | MMC_CAP_CMD23; @@ -346,6 +539,24 @@ static int sdhci_sprd_probe(struct platform_device *pdev) goto pltfm_free; sprd_host = TO_SPRD_HOST(host); + sdhci_sprd_phy_param_parse(sprd_host, pdev->dev.of_node); + + sprd_host->pinctrl = devm_pinctrl_get(&pdev->dev); + if (!IS_ERR(sprd_host->pinctrl)) { + sprd_host->pins_uhs = + pinctrl_lookup_state(sprd_host->pinctrl, "state_uhs"); + if (IS_ERR(sprd_host->pins_uhs)) { + ret = PTR_ERR(sprd_host->pins_uhs); + goto pltfm_free; + } + + sprd_host->pins_default = + pinctrl_lookup_state(sprd_host->pinctrl, "default"); + if (IS_ERR(sprd_host->pins_default)) { + ret = PTR_ERR(sprd_host->pins_default); + goto pltfm_free; + } + } clk = devm_clk_get(&pdev->dev, "sdio"); if (IS_ERR(clk)) { @@ -364,14 +575,22 @@ static int sdhci_sprd_probe(struct platform_device *pdev) } sprd_host->clk_enable = clk; + clk = devm_clk_get(&pdev->dev, "2x_enable"); + if (!IS_ERR(clk)) + sprd_host->clk_2x_enable = clk; + ret = clk_prepare_enable(sprd_host->clk_sdio); if (ret) goto pltfm_free; - clk_prepare_enable(sprd_host->clk_enable); + ret = clk_prepare_enable(sprd_host->clk_enable); if (ret) goto clk_disable; + ret = clk_prepare_enable(sprd_host->clk_2x_enable); + if (ret) + goto clk_disable2; + sdhci_sprd_init_config(host); host->version = sdhci_readw(host, SDHCI_HOST_VERSION); sprd_host->version = ((host->version & SDHCI_VENDOR_VER_MASK) >> @@ -408,6 +627,9 @@ pm_runtime_disable: pm_runtime_disable(&pdev->dev); pm_runtime_set_suspended(&pdev->dev); + clk_disable_unprepare(sprd_host->clk_2x_enable); + +clk_disable2: clk_disable_unprepare(sprd_host->clk_enable); clk_disable: @@ -427,6 +649,7 @@ static int sdhci_sprd_remove(struct platform_device *pdev) mmc_remove_host(mmc); clk_disable_unprepare(sprd_host->clk_sdio); clk_disable_unprepare(sprd_host->clk_enable); + clk_disable_unprepare(sprd_host->clk_2x_enable); mmc_free_host(mmc); @@ -449,6 +672,7 @@ static int sdhci_sprd_runtime_suspend(struct device *dev) clk_disable_unprepare(sprd_host->clk_sdio); clk_disable_unprepare(sprd_host->clk_enable); + clk_disable_unprepare(sprd_host->clk_2x_enable); return 0; } @@ -459,19 +683,28 @@ static int sdhci_sprd_runtime_resume(struct device *dev) struct sdhci_sprd_host *sprd_host = TO_SPRD_HOST(host); int ret; - ret = clk_prepare_enable(sprd_host->clk_enable); + ret = clk_prepare_enable(sprd_host->clk_2x_enable); if (ret) return ret; + ret = clk_prepare_enable(sprd_host->clk_enable); + if (ret) + goto clk_2x_disable; + ret = clk_prepare_enable(sprd_host->clk_sdio); - if (ret) { - clk_disable_unprepare(sprd_host->clk_enable); - return ret; - } + if (ret) + goto clk_disable; sdhci_runtime_resume_host(host); - return 0; + +clk_disable: + clk_disable_unprepare(sprd_host->clk_enable); + +clk_2x_disable: + clk_disable_unprepare(sprd_host->clk_2x_enable); + + return ret; } #endif diff --git a/drivers/mmc/host/sdhci-tegra.c b/drivers/mmc/host/sdhci-tegra.c index 781a3e106d9a..f4d4761cf20a 100644 --- a/drivers/mmc/host/sdhci-tegra.c +++ b/drivers/mmc/host/sdhci-tegra.c @@ -1541,8 +1541,11 @@ static int sdhci_tegra_probe(struct platform_device *pdev) clk = devm_clk_get(mmc_dev(host->mmc), NULL); if (IS_ERR(clk)) { - dev_err(mmc_dev(host->mmc), "clk err\n"); rc = PTR_ERR(clk); + + if (rc != -EPROBE_DEFER) + dev_err(&pdev->dev, "failed to get clock: %d\n", rc); + goto err_clk_get; } clk_prepare_enable(clk); diff --git a/drivers/mmc/host/sdhci.h b/drivers/mmc/host/sdhci.h index 199712e7adbb..89fd96596a1f 100644 --- a/drivers/mmc/host/sdhci.h +++ b/drivers/mmc/host/sdhci.h @@ -89,7 +89,7 @@ #define SDHCI_CTRL_ADMA32 0x10 #define SDHCI_CTRL_ADMA64 0x18 #define SDHCI_CTRL_ADMA3 0x18 -#define SDHCI_CTRL_8BITBUS 0x20 +#define SDHCI_CTRL_8BITBUS 0x20 #define SDHCI_CTRL_CDTEST_INS 0x40 #define SDHCI_CTRL_CDTEST_EN 0x80 diff --git a/drivers/mmc/host/sdhci_am654.c b/drivers/mmc/host/sdhci_am654.c index 3222ea4d584d..bb90757ecace 100644 --- a/drivers/mmc/host/sdhci_am654.c +++ b/drivers/mmc/host/sdhci_am654.c @@ -6,6 +6,7 @@ * */ #include <linux/clk.h> +#include <linux/of.h> #include <linux/module.h> #include <linux/pm_runtime.h> #include <linux/property.h> @@ -36,11 +37,14 @@ #define OTAPDLYSEL_SHIFT 12 #define OTAPDLYSEL_MASK GENMASK(15, 12) #define STRBSEL_SHIFT 24 -#define STRBSEL_MASK GENMASK(27, 24) +#define STRBSEL_4BIT_MASK GENMASK(27, 24) +#define STRBSEL_8BIT_MASK GENMASK(31, 24) #define SEL50_SHIFT 8 #define SEL50_MASK BIT(SEL50_SHIFT) #define SEL100_SHIFT 9 #define SEL100_MASK BIT(SEL100_SHIFT) +#define FREQSEL_SHIFT 8 +#define FREQSEL_MASK GENMASK(10, 8) #define DLL_TRIM_ICP_SHIFT 4 #define DLL_TRIM_ICP_MASK GENMASK(7, 4) #define DR_TY_SHIFT 20 @@ -77,19 +81,29 @@ struct sdhci_am654_data { int trm_icp; int drv_strength; bool dll_on; + int strb_sel; + u32 flags; +}; + +struct sdhci_am654_driver_data { + const struct sdhci_pltfm_data *pdata; + u32 flags; +#define IOMUX_PRESENT (1 << 0) +#define FREQSEL_2_BIT (1 << 1) +#define STRBSEL_4_BIT (1 << 2) +#define DLL_PRESENT (1 << 3) }; static void sdhci_am654_set_clock(struct sdhci_host *host, unsigned int clock) { struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host); struct sdhci_am654_data *sdhci_am654 = sdhci_pltfm_priv(pltfm_host); - int sel50, sel100; + int sel50, sel100, freqsel; u32 mask, val; int ret; if (sdhci_am654->dll_on) { - regmap_update_bits(sdhci_am654->base, PHY_CTRL1, - ENDLL_MASK, 0); + regmap_update_bits(sdhci_am654->base, PHY_CTRL1, ENDLL_MASK, 0); sdhci_am654->dll_on = false; } @@ -101,27 +115,53 @@ static void sdhci_am654_set_clock(struct sdhci_host *host, unsigned int clock) mask = OTAPDLYENA_MASK | OTAPDLYSEL_MASK; val = (1 << OTAPDLYENA_SHIFT) | (sdhci_am654->otap_del_sel << OTAPDLYSEL_SHIFT); - regmap_update_bits(sdhci_am654->base, PHY_CTRL4, - mask, val); - switch (clock) { - case 200000000: - sel50 = 0; - sel100 = 0; - break; - case 100000000: - sel50 = 0; - sel100 = 1; - break; - default: - sel50 = 1; - sel100 = 0; + regmap_update_bits(sdhci_am654->base, PHY_CTRL4, mask, val); + /* Write to STRBSEL for HS400 speed mode */ + if (host->mmc->ios.timing == MMC_TIMING_MMC_HS400) { + if (sdhci_am654->flags & STRBSEL_4_BIT) + mask = STRBSEL_4BIT_MASK; + else + mask = STRBSEL_8BIT_MASK; + + regmap_update_bits(sdhci_am654->base, PHY_CTRL4, mask, + sdhci_am654->strb_sel << + STRBSEL_SHIFT); + } + + if (sdhci_am654->flags & FREQSEL_2_BIT) { + switch (clock) { + case 200000000: + sel50 = 0; + sel100 = 0; + break; + case 100000000: + sel50 = 0; + sel100 = 1; + break; + default: + sel50 = 1; + sel100 = 0; + } + + /* Configure PHY DLL frequency */ + mask = SEL50_MASK | SEL100_MASK; + val = (sel50 << SEL50_SHIFT) | (sel100 << SEL100_SHIFT); + regmap_update_bits(sdhci_am654->base, PHY_CTRL5, mask, + val); + } else { + switch (clock) { + case 200000000: + freqsel = 0x0; + break; + default: + freqsel = 0x4; + } + + regmap_update_bits(sdhci_am654->base, PHY_CTRL5, + FREQSEL_MASK, + freqsel << FREQSEL_SHIFT); } - /* Configure PHY DLL frequency */ - mask = SEL50_MASK | SEL100_MASK; - val = (sel50 << SEL50_SHIFT) | (sel100 << SEL100_SHIFT); - regmap_update_bits(sdhci_am654->base, PHY_CTRL5, - mask, val); /* Configure DLL TRIM */ mask = DLL_TRIM_ICP_MASK; val = sdhci_am654->trm_icp << DLL_TRIM_ICP_SHIFT; @@ -129,24 +169,41 @@ static void sdhci_am654_set_clock(struct sdhci_host *host, unsigned int clock) /* Configure DLL driver strength */ mask |= DR_TY_MASK; val |= sdhci_am654->drv_strength << DR_TY_SHIFT; - regmap_update_bits(sdhci_am654->base, PHY_CTRL1, - mask, val); + regmap_update_bits(sdhci_am654->base, PHY_CTRL1, mask, val); /* Enable DLL */ - regmap_update_bits(sdhci_am654->base, PHY_CTRL1, - ENDLL_MASK, 0x1 << ENDLL_SHIFT); + regmap_update_bits(sdhci_am654->base, PHY_CTRL1, ENDLL_MASK, + 0x1 << ENDLL_SHIFT); /* * Poll for DLL ready. Use a one second timeout. * Works in all experiments done so far */ - ret = regmap_read_poll_timeout(sdhci_am654->base, - PHY_STAT1, val, - val & DLLRDY_MASK, - 1000, 1000000); + ret = regmap_read_poll_timeout(sdhci_am654->base, PHY_STAT1, + val, val & DLLRDY_MASK, 1000, + 1000000); + if (ret) { + dev_err(mmc_dev(host->mmc), "DLL failed to relock\n"); + return; + } sdhci_am654->dll_on = true; } } +static void sdhci_j721e_4bit_set_clock(struct sdhci_host *host, + unsigned int clock) +{ + struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host); + struct sdhci_am654_data *sdhci_am654 = sdhci_pltfm_priv(pltfm_host); + int val, mask; + + mask = OTAPDLYENA_MASK | OTAPDLYSEL_MASK; + val = (1 << OTAPDLYENA_SHIFT) | + (sdhci_am654->otap_del_sel << OTAPDLYSEL_SHIFT); + regmap_update_bits(sdhci_am654->base, PHY_CTRL4, mask, val); + + sdhci_set_clock(host, clock); +} + static void sdhci_am654_set_power(struct sdhci_host *host, unsigned char mode, unsigned short vdd) { @@ -197,6 +254,56 @@ static const struct sdhci_pltfm_data sdhci_am654_pdata = { .quirks2 = SDHCI_QUIRK2_PRESET_VALUE_BROKEN, }; +static const struct sdhci_am654_driver_data sdhci_am654_drvdata = { + .pdata = &sdhci_am654_pdata, + .flags = IOMUX_PRESENT | FREQSEL_2_BIT | STRBSEL_4_BIT | DLL_PRESENT, +}; + +static struct sdhci_ops sdhci_j721e_8bit_ops = { + .get_max_clock = sdhci_pltfm_clk_get_max_clock, + .get_timeout_clock = sdhci_pltfm_clk_get_max_clock, + .set_uhs_signaling = sdhci_set_uhs_signaling, + .set_bus_width = sdhci_set_bus_width, + .set_power = sdhci_am654_set_power, + .set_clock = sdhci_am654_set_clock, + .write_b = sdhci_am654_write_b, + .reset = sdhci_reset, +}; + +static const struct sdhci_pltfm_data sdhci_j721e_8bit_pdata = { + .ops = &sdhci_j721e_8bit_ops, + .quirks = SDHCI_QUIRK_INVERTED_WRITE_PROTECT | + SDHCI_QUIRK_MULTIBLOCK_READ_ACMD12, + .quirks2 = SDHCI_QUIRK2_PRESET_VALUE_BROKEN, +}; + +static const struct sdhci_am654_driver_data sdhci_j721e_8bit_drvdata = { + .pdata = &sdhci_j721e_8bit_pdata, + .flags = DLL_PRESENT, +}; + +static struct sdhci_ops sdhci_j721e_4bit_ops = { + .get_max_clock = sdhci_pltfm_clk_get_max_clock, + .get_timeout_clock = sdhci_pltfm_clk_get_max_clock, + .set_uhs_signaling = sdhci_set_uhs_signaling, + .set_bus_width = sdhci_set_bus_width, + .set_power = sdhci_am654_set_power, + .set_clock = sdhci_j721e_4bit_set_clock, + .write_b = sdhci_am654_write_b, + .reset = sdhci_reset, +}; + +static const struct sdhci_pltfm_data sdhci_j721e_4bit_pdata = { + .ops = &sdhci_j721e_4bit_ops, + .quirks = SDHCI_QUIRK_INVERTED_WRITE_PROTECT | + SDHCI_QUIRK_MULTIBLOCK_READ_ACMD12, + .quirks2 = SDHCI_QUIRK2_PRESET_VALUE_BROKEN, +}; + +static const struct sdhci_am654_driver_data sdhci_j721e_4bit_drvdata = { + .pdata = &sdhci_j721e_4bit_pdata, + .flags = IOMUX_PRESENT, +}; static int sdhci_am654_init(struct sdhci_host *host) { struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host); @@ -208,30 +315,34 @@ static int sdhci_am654_init(struct sdhci_host *host) /* Reset OTAP to default value */ mask = OTAPDLYENA_MASK | OTAPDLYSEL_MASK; - regmap_update_bits(sdhci_am654->base, PHY_CTRL4, - mask, 0x0); - - regmap_read(sdhci_am654->base, PHY_STAT1, &val); - if (~val & CALDONE_MASK) { - /* Calibrate IO lines */ - regmap_update_bits(sdhci_am654->base, PHY_CTRL1, - PDB_MASK, PDB_MASK); - ret = regmap_read_poll_timeout(sdhci_am654->base, PHY_STAT1, - val, val & CALDONE_MASK, 1, 20); - if (ret) - return ret; + regmap_update_bits(sdhci_am654->base, PHY_CTRL4, mask, 0x0); + + if (sdhci_am654->flags & DLL_PRESENT) { + regmap_read(sdhci_am654->base, PHY_STAT1, &val); + if (~val & CALDONE_MASK) { + /* Calibrate IO lines */ + regmap_update_bits(sdhci_am654->base, PHY_CTRL1, + PDB_MASK, PDB_MASK); + ret = regmap_read_poll_timeout(sdhci_am654->base, + PHY_STAT1, val, + val & CALDONE_MASK, + 1, 20); + if (ret) + return ret; + } } /* Enable pins by setting IO mux to 0 */ - regmap_update_bits(sdhci_am654->base, PHY_CTRL1, - IOMUX_ENABLE_MASK, 0); + if (sdhci_am654->flags & IOMUX_PRESENT) + regmap_update_bits(sdhci_am654->base, PHY_CTRL1, + IOMUX_ENABLE_MASK, 0); /* Set slot type based on SD or eMMC */ if (host->mmc->caps & MMC_CAP_NONREMOVABLE) ctl_cfg_2 = SLOTTYPE_EMBEDDED; - regmap_update_bits(sdhci_am654->base, CTL_CFG_2, - SLOTTYPE_MASK, ctl_cfg_2); + regmap_update_bits(sdhci_am654->base, CTL_CFG_2, SLOTTYPE_MASK, + ctl_cfg_2); return sdhci_add_host(host); } @@ -243,51 +354,73 @@ static int sdhci_am654_get_of_property(struct platform_device *pdev, int drv_strength; int ret; - ret = device_property_read_u32(dev, "ti,trm-icp", - &sdhci_am654->trm_icp); - if (ret) - return ret; - ret = device_property_read_u32(dev, "ti,otap-del-sel", &sdhci_am654->otap_del_sel); if (ret) return ret; - ret = device_property_read_u32(dev, "ti,driver-strength-ohm", - &drv_strength); - if (ret) - return ret; + if (sdhci_am654->flags & DLL_PRESENT) { + ret = device_property_read_u32(dev, "ti,trm-icp", + &sdhci_am654->trm_icp); + if (ret) + return ret; - switch (drv_strength) { - case 50: - sdhci_am654->drv_strength = DRIVER_STRENGTH_50_OHM; - break; - case 33: - sdhci_am654->drv_strength = DRIVER_STRENGTH_33_OHM; - break; - case 66: - sdhci_am654->drv_strength = DRIVER_STRENGTH_66_OHM; - break; - case 100: - sdhci_am654->drv_strength = DRIVER_STRENGTH_100_OHM; - break; - case 40: - sdhci_am654->drv_strength = DRIVER_STRENGTH_40_OHM; - break; - default: - dev_err(dev, "Invalid driver strength\n"); - return -EINVAL; + ret = device_property_read_u32(dev, "ti,driver-strength-ohm", + &drv_strength); + if (ret) + return ret; + + switch (drv_strength) { + case 50: + sdhci_am654->drv_strength = DRIVER_STRENGTH_50_OHM; + break; + case 33: + sdhci_am654->drv_strength = DRIVER_STRENGTH_33_OHM; + break; + case 66: + sdhci_am654->drv_strength = DRIVER_STRENGTH_66_OHM; + break; + case 100: + sdhci_am654->drv_strength = DRIVER_STRENGTH_100_OHM; + break; + case 40: + sdhci_am654->drv_strength = DRIVER_STRENGTH_40_OHM; + break; + default: + dev_err(dev, "Invalid driver strength\n"); + return -EINVAL; + } } + device_property_read_u32(dev, "ti,strobe-sel", &sdhci_am654->strb_sel); + sdhci_get_of_property(pdev); return 0; } +static const struct of_device_id sdhci_am654_of_match[] = { + { + .compatible = "ti,am654-sdhci-5.1", + .data = &sdhci_am654_drvdata, + }, + { + .compatible = "ti,j721e-sdhci-8bit", + .data = &sdhci_j721e_8bit_drvdata, + }, + { + .compatible = "ti,j721e-sdhci-4bit", + .data = &sdhci_j721e_4bit_drvdata, + }, + { /* sentinel */ } +}; + static int sdhci_am654_probe(struct platform_device *pdev) { + const struct sdhci_am654_driver_data *drvdata; struct sdhci_pltfm_host *pltfm_host; struct sdhci_am654_data *sdhci_am654; + const struct of_device_id *match; struct sdhci_host *host; struct resource *res; struct clk *clk_xin; @@ -295,12 +428,15 @@ static int sdhci_am654_probe(struct platform_device *pdev) void __iomem *base; int ret; - host = sdhci_pltfm_init(pdev, &sdhci_am654_pdata, sizeof(*sdhci_am654)); + match = of_match_node(sdhci_am654_of_match, pdev->dev.of_node); + drvdata = match->data; + host = sdhci_pltfm_init(pdev, drvdata->pdata, sizeof(*sdhci_am654)); if (IS_ERR(host)) return PTR_ERR(host); pltfm_host = sdhci_priv(host); sdhci_am654 = sdhci_pltfm_priv(pltfm_host); + sdhci_am654->flags = drvdata->flags; clk_xin = devm_clk_get(dev, "clk_xin"); if (IS_ERR(clk_xin)) { @@ -375,11 +511,6 @@ static int sdhci_am654_remove(struct platform_device *pdev) return 0; } -static const struct of_device_id sdhci_am654_of_match[] = { - { .compatible = "ti,am654-sdhci-5.1" }, - { /* sentinel */ } -}; - static struct platform_driver sdhci_am654_driver = { .driver = { .name = "sdhci-am654", diff --git a/drivers/mmc/host/tmio_mmc.c b/drivers/mmc/host/tmio_mmc.c index 93e83ad25976..8539e10784b4 100644 --- a/drivers/mmc/host/tmio_mmc.c +++ b/drivers/mmc/host/tmio_mmc.c @@ -172,6 +172,8 @@ static int tmio_mmc_probe(struct platform_device *pdev) host->mmc->f_max = pdata->hclk; host->mmc->f_min = pdata->hclk / 512; + pm_runtime_enable(&pdev->dev); + ret = tmio_mmc_host_probe(host); if (ret) goto host_free; @@ -191,6 +193,7 @@ host_remove: tmio_mmc_host_remove(host); host_free: tmio_mmc_host_free(host); + pm_runtime_disable(&pdev->dev); cell_disable: if (cell->disable) cell->disable(pdev); @@ -207,6 +210,8 @@ static int tmio_mmc_remove(struct platform_device *pdev) if (cell->disable) cell->disable(pdev); + pm_runtime_disable(&pdev->dev); + return 0; } diff --git a/drivers/mmc/host/tmio_mmc_core.c b/drivers/mmc/host/tmio_mmc_core.c index 84cb7d2aacdf..2cb3f951c3e2 100644 --- a/drivers/mmc/host/tmio_mmc_core.c +++ b/drivers/mmc/host/tmio_mmc_core.c @@ -26,6 +26,7 @@ #include <linux/delay.h> #include <linux/device.h> +#include <linux/dma-mapping.h> #include <linux/highmem.h> #include <linux/interrupt.h> #include <linux/io.h> @@ -45,7 +46,6 @@ #include <linux/scatterlist.h> #include <linux/sizes.h> #include <linux/spinlock.h> -#include <linux/swiotlb.h> #include <linux/workqueue.h> #include "tmio_mmc.h" @@ -1153,6 +1153,15 @@ void tmio_mmc_host_free(struct tmio_mmc_host *host) } EXPORT_SYMBOL_GPL(tmio_mmc_host_free); +/** + * tmio_mmc_host_probe() - Common probe for all implementations + * @_host: Host to probe + * + * Perform tasks common to all implementations probe functions. + * + * The caller should have called pm_runtime_enable() prior to calling + * the common probe function. + */ int tmio_mmc_host_probe(struct tmio_mmc_host *_host) { struct platform_device *pdev = _host->pdev; @@ -1190,19 +1199,9 @@ int tmio_mmc_host_probe(struct tmio_mmc_host *_host) mmc->max_blk_size = TMIO_MAX_BLK_SIZE; mmc->max_blk_count = pdata->max_blk_count ? : (PAGE_SIZE / mmc->max_blk_size) * mmc->max_segs; - mmc->max_req_size = mmc->max_blk_size * mmc->max_blk_count; - /* - * Since swiotlb has memory size limitation, this will calculate - * the maximum size locally (because we don't have any APIs for it now) - * and check the current max_req_size. And then, this will update - * the max_req_size if needed as a workaround. - */ - if (swiotlb_max_segment()) { - unsigned int max_size = (1 << IO_TLB_SHIFT) * IO_TLB_SEGSIZE; - - if (mmc->max_req_size > max_size) - mmc->max_req_size = max_size; - } + mmc->max_req_size = min_t(size_t, + mmc->max_blk_size * mmc->max_blk_count, + dma_max_mapping_size(&pdev->dev)); mmc->max_seg_size = mmc->max_req_size; if (mmc_can_gpio_ro(mmc)) @@ -1261,7 +1260,6 @@ int tmio_mmc_host_probe(struct tmio_mmc_host *_host) pm_runtime_set_active(&pdev->dev); pm_runtime_set_autosuspend_delay(&pdev->dev, 50); pm_runtime_use_autosuspend(&pdev->dev); - pm_runtime_enable(&pdev->dev); ret = mmc_add_host(mmc); if (ret) @@ -1297,7 +1295,6 @@ void tmio_mmc_host_remove(struct tmio_mmc_host *host) pm_runtime_dont_use_autosuspend(&pdev->dev); pm_runtime_put_sync(&pdev->dev); - pm_runtime_disable(&pdev->dev); } EXPORT_SYMBOL_GPL(tmio_mmc_host_remove); diff --git a/drivers/mmc/host/uniphier-sd.c b/drivers/mmc/host/uniphier-sd.c index 91a2be41edf6..49aad9a79c18 100644 --- a/drivers/mmc/host/uniphier-sd.c +++ b/drivers/mmc/host/uniphier-sd.c @@ -631,6 +631,7 @@ static int uniphier_sd_probe(struct platform_device *pdev) host->clk_disable = uniphier_sd_clk_disable; host->set_clock = uniphier_sd_set_clock; + pm_runtime_enable(&pdev->dev); ret = uniphier_sd_clk_enable(host); if (ret) goto free_host; @@ -652,6 +653,7 @@ static int uniphier_sd_probe(struct platform_device *pdev) free_host: tmio_mmc_host_free(host); + pm_runtime_disable(&pdev->dev); return ret; } @@ -662,6 +664,7 @@ static int uniphier_sd_remove(struct platform_device *pdev) tmio_mmc_host_remove(host); uniphier_sd_clk_disable(host); + pm_runtime_disable(&pdev->dev); return 0; } diff --git a/include/linux/dma-mapping.h b/include/linux/dma-mapping.h index 6309a721394b..8d13e28a8e07 100644 --- a/include/linux/dma-mapping.h +++ b/include/linux/dma-mapping.h @@ -729,13 +729,6 @@ static inline int dma_set_seg_boundary(struct device *dev, unsigned long mask) return -EIO; } -#ifndef dma_max_pfn -static inline unsigned long dma_max_pfn(struct device *dev) -{ - return (*dev->dma_mask >> PAGE_SHIFT) + dev->dma_pfn_offset; -} -#endif - static inline int dma_get_cache_alignment(void) { #ifdef ARCH_DMA_MINALIGN diff --git a/include/linux/mmc/host.h b/include/linux/mmc/host.h index 7ac3755444d3..4a351cb7f20f 100644 --- a/include/linux/mmc/host.h +++ b/include/linux/mmc/host.h @@ -501,7 +501,6 @@ static inline void mmc_signal_sdio_irq(struct mmc_host *host) wake_up_process(host->sdio_irq_thread); } -void sdio_run_irqs(struct mmc_host *host); void sdio_signal_irq(struct mmc_host *host); #ifdef CONFIG_REGULATOR |