[media] dvb_usb_v2: multiple small tweaks around the code

Naming, small code changes, debug writings, etc.

Signed-off-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

4 files changed, 109 insertions, 133 deletions

diff --git a/drivers/media/dvb/dvb-usb/anysee.c b/drivers/media/dvb/dvb-usb/anysee.c
index 2655034b86a9..9de0004c06d3 100644
--- a/drivers/media/dvb/dvb-usb/anysee.c
+++ b/drivers/media/dvb/dvb-usb/anysee.c
@@ -1264,7 +1264,7 @@ static int anysee_init(struct dvb_usb_device *d)
 	return 0;
 }
 
-static void anysee_disconnect(struct dvb_usb_device *d)
+static void anysee_exit(struct dvb_usb_device *d)
 {
 	return anysee_ci_release(d);
 }
@@ -1287,7 +1287,7 @@ static struct dvb_usb_device_properties anysee_props = {
 	.get_rc_config    = anysee_get_rc_config,
 	.frontend_ctrl    = anysee_frontend_ctrl,
 	.streaming_ctrl   = anysee_streaming_ctrl,
-	.disconnect       = anysee_disconnect,
+	.exit             = anysee_exit,
 
 	.num_adapters = 1,
 	.adapter = {
diff --git a/drivers/media/dvb/dvb-usb/dvb_usb.h b/drivers/media/dvb/dvb-usb/dvb_usb.h
index a87a9ff579c4..56bf3a7f085b 100644
--- a/drivers/media/dvb/dvb-usb/dvb_usb.h
+++ b/drivers/media/dvb/dvb-usb/dvb_usb.h
@@ -10,10 +10,8 @@
 #ifndef DVB_USB_H
 #define DVB_USB_H
 
-#include <linux/input.h>
-#include <linux/usb.h>
+#include <linux/usb/input.h>
 #include <linux/firmware.h>
-#include <linux/mutex.h>
 #include <media/rc-core.h>
 
 #include "dvb_frontend.h"
@@ -65,15 +63,35 @@
 		.rc_map = (rc), \
 	})
 
+struct dvb_usb_device;
+struct dvb_usb_adapter;
+
 struct dvb_usb_driver_info {
 	const char *name;
 	const char *rc_map;
 	const struct dvb_usb_device_properties *props;
 };
 
-struct dvb_usb_device;
-struct dvb_usb_adapter;
-struct usb_data_stream;
+/**
+ * struct dvb_rc properties of remote controller, using rc-core
+ * @rc_codes: name of rc codes table
+ * @protocol: type of protocol(s) currently used by the driver
+ * @allowed_protos: protocol(s) supported by the driver
+ * @driver_type: Used to point if a device supports raw mode
+ * @change_protocol: callback to change protocol
+ * @rc_query: called to query an event event.
+ * @rc_interval: time in ms between two queries.
+ * @bulk_mode: device supports bulk mode for RC (disable polling mode)
+ */
+struct dvb_usb_rc {
+	char *map_name;
+	u64 allowed_protos;
+	int (*change_protocol)(struct rc_dev *dev, u64 rc_type);
+	int (*query) (struct dvb_usb_device *d);
+	unsigned int interval;
+	const enum rc_driver_type driver_type;
+	bool bulk_mode;
+};
 
 /**
  * Properties of USB streaming - TODO this structure should be somewhere else
@@ -83,13 +101,13 @@ struct usb_data_stream;
 struct usb_data_stream_properties {
 #define USB_BULK  1
 #define USB_ISOC  2
-	int type;
-	int count;
-	int endpoint;
+	u8 type;
+	u8 count;
+	u8 endpoint;
 
 	union {
 		struct {
-			int buffersize; /* per URB */
+			unsigned int buffersize; /* per URB */
 		} bulk;
 		struct {
 			int framesperurb;
@@ -124,10 +142,9 @@ struct dvb_usb_adapter_properties {
 #define DVB_USB_ADAP_HAS_PID_FILTER               0x01
 #define DVB_USB_ADAP_PID_FILTER_CAN_BE_TURNED_OFF 0x02
 #define DVB_USB_ADAP_NEED_PID_FILTERING           0x04
-	int caps;
-	int size_of_priv;
+	u8 caps;
 
-	int pid_filter_count;
+	u8 pid_filter_count;
 	int (*pid_filter_ctrl) (struct dvb_usb_adapter *, int);
 	int (*pid_filter) (struct dvb_usb_adapter *, int, u16, int);
 
@@ -135,27 +152,6 @@ struct dvb_usb_adapter_properties {
 };
 
 /**
- * struct dvb_rc properties of remote controller, using rc-core
- * @rc_codes: name of rc codes table
- * @protocol: type of protocol(s) currently used by the driver
- * @allowed_protos: protocol(s) supported by the driver
- * @driver_type: Used to point if a device supports raw mode
- * @change_protocol: callback to change protocol
- * @rc_query: called to query an event event.
- * @rc_interval: time in ms between two queries.
- * @bulk_mode: device supports bulk mode for RC (disable polling mode)
- */
-struct dvb_usb_rc {
-	char *map_name;
-	u64 allowed_protos;
-	int (*change_protocol)(struct rc_dev *dev, u64 rc_type);
-	int (*query) (struct dvb_usb_device *d);
-	int interval;
-	const enum rc_driver_type driver_type;
-	bool bulk_mode;
-};
-
-/**
  * struct dvb_usb_device_properties - properties of a dvb-usb-device
  * @owner: owner of the dvb_adapter
  * @usb_ctrl: which USB device-side controller is in use. Needed for firmware
@@ -196,8 +192,11 @@ struct dvb_usb_device_properties {
 	const char *driver_name;
 	struct module *owner;
 	short *adapter_nr;
+
 	u8 bInterfaceNumber;
-	int size_of_priv;
+	unsigned int size_of_priv;
+	u8 generic_bulk_ctrl_endpoint;
+	u8 generic_bulk_ctrl_endpoint_response;
 
 #define WARM                  0
 #define COLD                  1
@@ -207,11 +206,12 @@ struct dvb_usb_device_properties {
 	int (*download_firmware) (struct dvb_usb_device *,
 			const struct firmware *);
 
-	int num_adapters;
-	int (*get_adapter_count) (struct dvb_usb_device *);
-	struct dvb_usb_adapter_properties adapter[MAX_NO_OF_ADAPTER_PER_DEVICE];
+	struct i2c_algorithm *i2c_algo;
 
-	int (*power_ctrl)       (struct dvb_usb_device *, int);
+	unsigned int num_adapters;
+	struct dvb_usb_adapter_properties adapter[MAX_NO_OF_ADAPTER_PER_DEVICE];
+	int (*get_adapter_count) (struct dvb_usb_device *);
+	int (*power_ctrl) (struct dvb_usb_device *, int);
 	int (*read_config) (struct dvb_usb_device *d);
 	int (*read_mac_address) (struct dvb_usb_adapter *, u8 []);
 	int (*frontend_attach) (struct dvb_usb_adapter *);
@@ -221,18 +221,13 @@ struct dvb_usb_device_properties {
 	int (*fe_ioctl_override) (struct dvb_frontend *,
 			unsigned int, void *, unsigned int);
 	int (*init) (struct dvb_usb_device *);
-	void (*disconnect) (struct dvb_usb_device *);
+	void (*exit) (struct dvb_usb_device *);
 	int (*get_rc_config) (struct dvb_usb_device *, struct dvb_usb_rc *);
 #define DVB_USB_FE_TS_TYPE_188        0
 #define DVB_USB_FE_TS_TYPE_204        1
 #define DVB_USB_FE_TS_TYPE_RAW        2
 	int (*get_stream_config) (struct dvb_frontend *,  u8 *,
 			struct usb_data_stream_properties *);
-
-	struct i2c_algorithm *i2c_algo;
-
-	int generic_bulk_ctrl_endpoint;
-	int generic_bulk_ctrl_endpoint_response;
 };
 
 /**
@@ -247,12 +242,12 @@ struct dvb_usb_device_properties {
  */
 #define MAX_NO_URBS_FOR_DATA_STREAM 10
 struct usb_data_stream {
-	struct usb_device                 *udev;
-	struct usb_data_stream_properties  props;
+	struct usb_device *udev;
+	struct usb_data_stream_properties props;
 
 #define USB_STATE_INIT    0x00
 #define USB_STATE_URB_BUF 0x01
-	int state;
+	u8 state;
 
 	void (*complete) (struct usb_data_stream *, u8 *, size_t);
 
@@ -297,26 +292,23 @@ struct usb_data_stream {
 struct dvb_usb_adapter {
 	const struct dvb_usb_adapter_properties *props;
 	struct usb_data_stream stream;
-	u8  id;
+	u8 id;
 	u8 ts_type;
-	int pid_filtering;
-	int feed_count;
-	int max_feed_count;
-
-	/* sync frontend and streaming as those are different tasks */
-	struct mutex sync_mutex;
+	bool pid_filtering;
+	u8 feed_count;
+	u8 max_feed_count;
+	s8 active_fe;
 
 	/* dvb */
 	struct dvb_adapter   dvb_adap;
 	struct dmxdev        dmxdev;
 	struct dvb_demux     demux;
 	struct dvb_net       dvb_net;
+	struct mutex         sync_mutex;
 
 	struct dvb_frontend *fe[MAX_NO_OF_FE_PER_ADAP];
 	int (*fe_init[MAX_NO_OF_FE_PER_ADAP]) (struct dvb_frontend *);
 	int (*fe_sleep[MAX_NO_OF_FE_PER_ADAP]) (struct dvb_frontend *);
-
-	int active_fe;
 };
 
 /**
@@ -346,11 +338,12 @@ struct dvb_usb_device {
 	const struct dvb_usb_device_properties *props;
 	const char *name;
 	const char *rc_map;
-	struct dvb_usb_rc rc;
+
 	struct usb_device *udev;
+	struct usb_interface *intf;
+	struct dvb_usb_rc rc;
 	struct work_struct probe_work;
 	pid_t work_pid;
-	struct usb_interface *intf;
 	int powered;
 
 	/* locking */
diff --git a/drivers/media/dvb/dvb-usb/dvb_usb_core.c b/drivers/media/dvb/dvb-usb/dvb_usb_core.c
index f3e1ec2c473e..42473e1dbac8 100644
--- a/drivers/media/dvb/dvb-usb/dvb_usb_core.c
+++ b/drivers/media/dvb/dvb-usb/dvb_usb_core.c
@@ -12,22 +12,22 @@
  * see Documentation/dvb/README.dvb-usb for more information
  */
 #include "dvb_usb_common.h"
-#include <linux/usb/input.h>
 
 int dvb_usbv2_disable_rc_polling;
 module_param_named(disable_rc_polling, dvb_usbv2_disable_rc_polling, int, 0644);
 MODULE_PARM_DESC(disable_rc_polling,
-		"disable remote control polling (default: 0).");
+		"disable remote control polling (default: 0)");
 static int dvb_usb_force_pid_filter_usage;
 module_param_named(force_pid_filter_usage, dvb_usb_force_pid_filter_usage,
 		int, 0444);
-MODULE_PARM_DESC(force_pid_filter_usage, "force all dvb-usb-devices to use a" \
-		" PID filter, if any (default: 0).");
+MODULE_PARM_DESC(force_pid_filter_usage, "force all DVB USB devices to use a " \
+		"PID filter, if any (default: 0)");
 
 static int dvb_usbv2_download_firmware(struct dvb_usb_device *d, const char *name)
 {
 	int ret;
 	const struct firmware *fw;
+	pr_debug("%s:\n", __func__);
 
 	if (!d->props->download_firmware) {
 		ret = -EINVAL;
@@ -36,10 +36,10 @@ static int dvb_usbv2_download_firmware(struct dvb_usb_device *d, const char *nam
 
 	ret = request_firmware(&fw, name, &d->udev->dev);
 	if (ret < 0) {
-		pr_err("%s: did not find the firmware file. (%s) " \
+		pr_err("%s: Did not find the firmware file '%s'. " \
 				"Please see linux/Documentation/dvb/ for " \
-				"more details on firmware-problems. (%d)\n",
-				KBUILD_MODNAME, name, ret);
+				"more details on firmware-problems. Status " \
+				"%d\n", KBUILD_MODNAME, name, ret);
 		goto err;
 	}
 
@@ -47,9 +47,7 @@ static int dvb_usbv2_download_firmware(struct dvb_usb_device *d, const char *nam
 			name);
 
 	ret = d->props->download_firmware(d, fw);
-
 	release_firmware(fw);
-
 	if (ret < 0)
 		goto err;
 
@@ -62,7 +60,6 @@ err:
 static int dvb_usbv2_i2c_init(struct dvb_usb_device *d)
 {
 	int ret;
-
 	pr_debug("%s:\n", __func__);
 
 	if (!d->props->i2c_algo)
@@ -103,29 +100,27 @@ static void dvb_usb_read_remote_control(struct work_struct *work)
 			struct dvb_usb_device, rc_query_work.work);
 	int ret;
 
-	/* TODO: need a lock here.  We can simply skip checking for the remote
-	   control if we're busy. */
-
-	/* when the parameter has been set to 1 via sysfs while the
-	 * driver was running, or when bulk mode is enabled after IR init
+	/*
+	 * When the parameter has been set to 1 via sysfs while the
+	 * driver was running, or when bulk mode is enabled after IR init.
 	 */
 	if (dvb_usbv2_disable_rc_polling || d->rc.bulk_mode)
 		return;
 
 	ret = d->rc.query(d);
-	if (ret < 0)
-		pr_err("%s: error %d while querying for an remote control " \
-				"event\n", KBUILD_MODNAME, ret);
+	if (ret < 0) {
+		pr_err("%s: rc.query() failed=%d\n", KBUILD_MODNAME, ret);
+		return; /* stop polling */
+	}
 
 	schedule_delayed_work(&d->rc_query_work,
-			      msecs_to_jiffies(d->rc.interval));
+			msecs_to_jiffies(d->rc.interval));
 }
 
 static int dvb_usbv2_remote_init(struct dvb_usb_device *d)
 {
 	int ret;
 	struct rc_dev *dev;
-
 	pr_debug("%s:\n", __func__);
 
 	if (dvb_usbv2_disable_rc_polling || !d->props->get_rc_config)
@@ -142,7 +137,7 @@ static int dvb_usbv2_remote_init(struct dvb_usb_device *d)
 	}
 
 	dev->dev.parent = &d->udev->dev;
-	dev->input_name = "IR-receiver inside an USB DVB receiver";
+	dev->input_name = d->name;
 	usb_make_path(d->udev, d->rc_phys, sizeof(d->rc_phys));
 	strlcat(d->rc_phys, "/ir0", sizeof(d->rc_phys));
 	dev->input_phys = d->rc_phys;
@@ -153,13 +148,10 @@ static int dvb_usbv2_remote_init(struct dvb_usb_device *d)
 	dev->allowed_protos = d->rc.allowed_protos;
 	dev->change_protocol = d->rc.change_protocol;
 	dev->priv = d;
-	/* select used keymap */
 	if (d->rc.map_name)
 		dev->map_name = d->rc.map_name;
-	else if (d->rc_map)
-		dev->map_name = d->rc_map;
 	else
-		dev->map_name = RC_MAP_EMPTY; /* keep rc enabled */
+		dev->map_name = d->rc_map;
 
 	ret = rc_register_device(dev);
 	if (ret < 0) {
@@ -235,9 +227,8 @@ int dvb_usbv2_adapter_stream_init(struct dvb_usb_adapter *adap)
 int dvb_usbv2_adapter_stream_exit(struct dvb_usb_adapter *adap)
 {
 	pr_debug("%s: adap=%d\n", __func__, adap->id);
-	usb_urb_exitv2(&adap->stream);
 
-	return 0;
+	return usb_urb_exitv2(&adap->stream);
 }
 
 static inline int dvb_usb_ctrl_feed(struct dvb_demux_feed *dvbdmxfeed,
@@ -369,7 +360,7 @@ int dvb_usbv2_adapter_dvb_init(struct dvb_usb_adapter *adap)
 	if (ret < 0) {
 		pr_debug("%s: dvb_register_adapter() failed=%d\n", __func__,
 				ret);
-		goto err;
+		goto err_dvb_register_adapter;
 	}
 
 	adap->dvb_adap.priv = adap;
@@ -378,7 +369,7 @@ int dvb_usbv2_adapter_dvb_init(struct dvb_usb_adapter *adap)
 		ret = d->props->read_mac_address(adap,
 				adap->dvb_adap.proposed_mac);
 		if (ret < 0)
-			goto err_dmx;
+			goto err_dvb_dmx_init;
 
 		pr_info("%s: MAC address: %pM\n", KBUILD_MODNAME,
 				adap->dvb_adap.proposed_mac);
@@ -387,8 +378,7 @@ int dvb_usbv2_adapter_dvb_init(struct dvb_usb_adapter *adap)
 	adap->demux.dmx.capabilities = DMX_TS_FILTERING | DMX_SECTION_FILTERING;
 	adap->demux.priv             = adap;
 	adap->demux.filternum        = 0;
-	if (adap->demux.filternum < adap->max_feed_count)
-		adap->demux.filternum = adap->max_feed_count;
+	adap->demux.filternum        = adap->max_feed_count;
 	adap->demux.feednum          = adap->demux.filternum;
 	adap->demux.start_feed       = dvb_usb_start_feed;
 	adap->demux.stop_feed        = dvb_usb_stop_feed;
@@ -396,7 +386,7 @@ int dvb_usbv2_adapter_dvb_init(struct dvb_usb_adapter *adap)
 	ret = dvb_dmx_init(&adap->demux);
 	if (ret < 0) {
 		pr_err("%s: dvb_dmx_init() failed=%d\n", KBUILD_MODNAME, ret);
-		goto err_dmx;
+		goto err_dvb_dmx_init;
 	}
 
 	adap->dmxdev.filternum       = adap->demux.filternum;
@@ -406,25 +396,25 @@ int dvb_usbv2_adapter_dvb_init(struct dvb_usb_adapter *adap)
 	if (ret < 0) {
 		pr_err("%s: dvb_dmxdev_init() failed=%d\n", KBUILD_MODNAME,
 				ret);
-		goto err_dmx_dev;
+		goto err_dvb_dmxdev_init;
 	}
 
 	ret = dvb_net_init(&adap->dvb_adap, &adap->dvb_net, &adap->demux.dmx);
 	if (ret < 0) {
 		pr_err("%s: dvb_net_init() failed=%d\n", KBUILD_MODNAME, ret);
-		goto err_net_init;
+		goto err_dvb_net_init;
 	}
 
 	mutex_init(&adap->sync_mutex);
 
 	return 0;
-err_net_init:
+err_dvb_net_init:
 	dvb_dmxdev_release(&adap->dmxdev);
-err_dmx_dev:
+err_dvb_dmxdev_init:
 	dvb_dmx_release(&adap->demux);
-err_dmx:
+err_dvb_dmx_init:
 	dvb_unregister_adapter(&adap->dvb_adap);
-err:
+err_dvb_register_adapter:
 	adap->dvb_adap.priv = NULL;
 	return ret;
 }
@@ -468,7 +458,7 @@ err:
 	return ret;
 }
 
-static int dvb_usb_fe_wakeup(struct dvb_frontend *fe)
+static int dvb_usb_fe_init(struct dvb_frontend *fe)
 {
 	int ret;
 	struct dvb_usb_adapter *adap = fe->dvb->priv;
@@ -560,10 +550,9 @@ int dvb_usbv2_adapter_frontend_init(struct dvb_usb_adapter *adap)
 
 	for (i = 0; i < MAX_NO_OF_FE_PER_ADAP && adap->fe[i]; i++) {
 		adap->fe[i]->id = i;
-
 		/* re-assign sleep and wakeup functions */
 		adap->fe_init[i] = adap->fe[i]->ops.init;
-		adap->fe[i]->ops.init  = dvb_usb_fe_wakeup;
+		adap->fe[i]->ops.init = dvb_usb_fe_init;
 		adap->fe_sleep[i] = adap->fe[i]->ops.sleep;
 		adap->fe[i]->ops.sleep = dvb_usb_fe_sleep;
 
@@ -699,7 +688,6 @@ err:
 static int dvb_usbv2_adapter_exit(struct dvb_usb_device *d)
 {
 	int i;
-
 	pr_debug("%s:\n", __func__);
 
 	for (i = MAX_NO_OF_ADAPTER_PER_DEVICE - 1; i >= 0; i--) {
@@ -727,7 +715,8 @@ static int dvb_usbv2_exit(struct dvb_usb_device *d)
 
 static int dvb_usbv2_init(struct dvb_usb_device *d)
 {
-	int ret = 0;
+	int ret;
+	pr_debug("%s:\n", __func__);
 
 	dvb_usbv2_device_power_ctrl(d, 1);
 
@@ -770,7 +759,6 @@ err:
  * is this routine. Due to that we delay actual operation using workqueue
  * and return always success here.
  */
-
 static void dvb_usbv2_init_work(struct work_struct *work)
 {
 	int ret;
@@ -778,7 +766,6 @@ static void dvb_usbv2_init_work(struct work_struct *work)
 			container_of(work, struct dvb_usb_device, probe_work);
 
 	d->work_pid = current->pid;
-
 	pr_debug("%s: work_pid=%d\n", __func__, d->work_pid);
 
 	if (d->props->size_of_priv) {
@@ -817,7 +804,8 @@ static void dvb_usbv2_init_work(struct work_struct *work)
 				 */
 				return;
 			} else {
-				/* Unexpected error. We must unregister driver
+				/*
+				 * Unexpected error. We must unregister driver
 				 * manually from the device, because device is
 				 * already register by returning from probe()
 				 * with success. usb_driver_release_interface()
@@ -844,7 +832,6 @@ static void dvb_usbv2_init_work(struct work_struct *work)
 err_usb_driver_release_interface:
 	pr_info("%s: '%s' error while loading driver (%d)\n", KBUILD_MODNAME,
 			d->name, ret);
-	/* it finally calls disconnect() which frees mem */
 	usb_driver_release_interface(to_usb_driver(d->intf->dev.driver),
 			d->intf);
 	pr_debug("%s: failed=%d\n", __func__, ret);
@@ -909,8 +896,7 @@ EXPORT_SYMBOL(dvb_usbv2_probe);
 void dvb_usbv2_disconnect(struct usb_interface *intf)
 {
 	struct dvb_usb_device *d = usb_get_intfdata(intf);
-	const char *name;
-
+	const char *name = d->name;
 	pr_debug("%s: pid=%d work_pid=%d\n", __func__, current->pid,
 			d->work_pid);
 
@@ -918,10 +904,9 @@ void dvb_usbv2_disconnect(struct usb_interface *intf)
 	if (d->work_pid != current->pid)
 		cancel_work_sync(&d->probe_work);
 
-	if (d->props->disconnect)
-		d->props->disconnect(d);
+	if (d->props->exit)
+		d->props->exit(d);
 
-	name = d->name;
 	dvb_usbv2_exit(d);
 
 	pr_info("%s: '%s' successfully deinitialized and disconnected\n",
@@ -933,7 +918,6 @@ int dvb_usbv2_suspend(struct usb_interface *intf, pm_message_t msg)
 {
 	struct dvb_usb_device *d = usb_get_intfdata(intf);
 	int i;
-
 	pr_debug("%s:\n", __func__);
 
 	/* stop remote controller poll */
@@ -955,7 +939,6 @@ int dvb_usbv2_resume(struct usb_interface *intf)
 {
 	struct dvb_usb_device *d = usb_get_intfdata(intf);
 	int i;
-
 	pr_debug("%s:\n", __func__);
 
 	/* start streaming */
diff --git a/drivers/media/dvb/dvb-usb/usb_urb.c b/drivers/media/dvb/dvb-usb/usb_urb.c
index 32e80be2168d..d860dac2a83d 100644
--- a/drivers/media/dvb/dvb-usb/usb_urb.c
+++ b/drivers/media/dvb/dvb-usb/usb_urb.c
@@ -38,7 +38,7 @@ static void usb_urb_complete(struct urb *urb)
 	case -ESHUTDOWN:
 		return;
 	default:        /* error */
-		pr_debug("%s: URB completition failed=%d\n", __func__,
+		pr_debug("%s: urb completition failed=%d\n", __func__,
 				urb->status);
 		break;
 	}
@@ -76,7 +76,7 @@ int usb_urb_killv2(struct usb_data_stream *stream)
 {
 	int i;
 	for (i = 0; i < stream->urbs_submitted; i++) {
-		pr_debug("%s: kill URB=%d\n", __func__, i);
+		pr_debug("%s: kill urb=%d\n", __func__, i);
 		/* stop the URB */
 		usb_kill_urb(stream->urb_list[i]);
 	}
@@ -96,10 +96,10 @@ int usb_urb_submitv2(struct usb_data_stream *stream,
 	}
 
 	for (i = 0; i < stream->urbs_initialized; i++) {
-		pr_debug("%s: submit URB=%d\n", __func__, i);
+		pr_debug("%s: submit urb=%d\n", __func__, i);
 		ret = usb_submit_urb(stream->urb_list[i], GFP_ATOMIC);
 		if (ret) {
-			pr_err("%s: could not submit URB no. %d - get them " \
+			pr_err("%s: could not submit urb no. %d - get them " \
 					"all back\n", KBUILD_MODNAME, i);
 			usb_urb_killv2(stream);
 			return ret;
@@ -115,9 +115,9 @@ int usb_urb_free_urbs(struct usb_data_stream *stream)
 
 	usb_urb_killv2(stream);
 
-	for (i = 0; i < stream->urbs_initialized; i++) {
-		if (stream->urb_list[i] != NULL) {
-			pr_debug("%s: free URB=%d\n", __func__, i);
+	for (i = stream->urbs_initialized - 1; i >= 0; i--) {
+		if (stream->urb_list[i]) {
+			pr_debug("%s: free urb=%d\n", __func__, i);
 			/* free the URBs */
 			usb_free_urb(stream->urb_list[i]);
 		}
@@ -133,7 +133,7 @@ static int usb_urb_alloc_bulk_urbs(struct usb_data_stream *stream)
 
 	/* allocate the URBs */
 	for (i = 0; i < stream->props.count; i++) {
-		pr_debug("%s: alloc URB=%d\n", __func__, i);
+		pr_debug("%s: alloc urb=%d\n", __func__, i);
 		stream->urb_list[i] = usb_alloc_urb(0, GFP_ATOMIC);
 		if (!stream->urb_list[i]) {
 			pr_debug("%s: failed\n", __func__);
@@ -164,7 +164,7 @@ static int usb_urb_alloc_isoc_urbs(struct usb_data_stream *stream)
 	for (i = 0; i < stream->props.count; i++) {
 		struct urb *urb;
 		int frame_offset = 0;
-		pr_debug("%s: alloc URB=%d\n", __func__, i);
+		pr_debug("%s: alloc urb=%d\n", __func__, i);
 		stream->urb_list[i] = usb_alloc_urb(
 				stream->props.u.isoc.framesperurb, GFP_ATOMIC);
 		if (!stream->urb_list[i]) {
@@ -229,17 +229,17 @@ int usb_alloc_stream_buffers(struct usb_data_stream *stream, int num,
 			__func__,  num * size);
 
 	for (stream->buf_num = 0; stream->buf_num < num; stream->buf_num++) {
-		pr_debug("%s: alloc buf=%d\n", __func__, stream->buf_num);
 		stream->buf_list[stream->buf_num] = usb_alloc_coherent(
 				stream->udev, size, GFP_ATOMIC,
 				&stream->dma_addr[stream->buf_num]);
-		if (stream->buf_list[stream->buf_num] == NULL) {
-			pr_debug("%s: failed\n", __func__);
+		if (!stream->buf_list[stream->buf_num]) {
+			pr_debug("%s: alloc buf=%d failed\n", __func__,
+					stream->buf_num);
 			usb_free_stream_buffers(stream);
 			return -ENOMEM;
 		}
 
-		pr_debug("%s: buf %d: %p (dma %llu)\n", __func__,
+		pr_debug("%s: alloc buf=%d %p (dma %llu)\n", __func__,
 				stream->buf_num,
 				stream->buf_list[stream->buf_num],
 				(long long)stream->dma_addr[stream->buf_num]);
@@ -255,7 +255,7 @@ int usb_urb_reconfig(struct usb_data_stream *stream,
 {
 	int buf_size;
 
-	if (props == NULL)
+	if (!props)
 		return 0;
 
 	/* check allocated buffers are large enough for the request */
@@ -293,7 +293,7 @@ int usb_urb_reconfig(struct usb_data_stream *stream,
 			return 0;
 	}
 
-	pr_debug("%s: re-alloc URBs\n", __func__);
+	pr_debug("%s: re-alloc urbs\n", __func__);
 
 	usb_urb_free_urbs(stream);
 	memcpy(&stream->props, props, sizeof(*props));
@@ -310,7 +310,7 @@ int usb_urb_initv2(struct usb_data_stream *stream,
 {
 	int ret;
 
-	if (stream == NULL || props == NULL)
+	if (!stream || !props)
 		return -EINVAL;
 
 	memcpy(&stream->props, props, sizeof(*props));
@@ -318,7 +318,7 @@ int usb_urb_initv2(struct usb_data_stream *stream,
 	usb_clear_halt(stream->udev, usb_rcvbulkpipe(stream->udev,
 			stream->props.endpoint));
 
-	if (stream->complete == NULL) {
+	if (!stream->complete) {
 		pr_err("%s: there is no data callback - this doesn't make " \
 				"sense\n", KBUILD_MODNAME);
 		return -EINVAL;
@@ -341,7 +341,7 @@ int usb_urb_initv2(struct usb_data_stream *stream,
 
 		return usb_urb_alloc_isoc_urbs(stream);
 	default:
-		pr_err("%s: unknown URB-type for data transfer\n",
+		pr_err("%s: unknown urb-type for data transfer\n",
 				KBUILD_MODNAME);
 		return -EINVAL;
 	}