diff options
author | Huacai Chen <chenhc@lemote.com> | 2016-01-21 16:09:50 +0300 |
---|---|---|
committer | Ralf Baechle <ralf@linux-mips.org> | 2016-01-22 04:00:49 +0300 |
commit | 5610b1254e3689b6ef8ebe2db260709a74da06c8 (patch) | |
tree | 0e5d228fc6b722d383d5c722311c1370dfde3ae1 | |
parent | 5754843225f78ac7cbe142a6899890a9733a5a5d (diff) | |
download | linux-5610b1254e3689b6ef8ebe2db260709a74da06c8.tar.xz |
MIPS: hpet: Choose a safe value for the ETIME check
This patch is borrowed from x86 hpet driver and explaind below:
Due to the overly intelligent design of HPETs, we need to workaround
the problem that the compare value which we write is already behind
the actual counter value at the point where the value hits the real
compare register. This happens for two reasons:
1) We read out the counter, add the delta and write the result to the
compare register. When a NMI hits between the read out and the write
then the counter can be ahead of the event already.
2) The write to the compare register is delayed by up to two HPET
cycles in AMD chipsets.
We can work around this by reading back the compare register to make
sure that the written value has hit the hardware. But that is bad
performance wise for the normal case where the event is far enough in
the future.
As we already know that the write can be delayed by up to two cycles
we can avoid the read back of the compare register completely if we
make the decision whether the delta has elapsed already or not based
on the following calculation:
cmp = event - actual_count;
If cmp is less than 64 HPET clock cycles, then we decide that the event
has happened already and return -ETIME. That covers the above #1 and #2
problems which would cause a wait for HPET wraparound (~306 seconds).
Signed-off-by: Huacai Chen <chenhc@lemote.com>
Cc: Aurelien Jarno <aurelien@aurel32.net>
Cc: Steven J. Hill <Steven.Hill@imgtec.com>
Cc: Fuxin Zhang <zhangfx@lemote.com>
Cc: Zhangjin Wu <wuzhangjin@gmail.com>
Cc: Huacai Chen <chenhc@lemote.com>
Cc: linux-mips@linux-mips.org
Cc: stable@vger.kernel.org
Patchwork: https://patchwork.linux-mips.org/patch/12162/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
-rw-r--r-- | arch/mips/loongson64/loongson-3/hpet.c | 10 |
1 files changed, 7 insertions, 3 deletions
diff --git a/arch/mips/loongson64/loongson-3/hpet.c b/arch/mips/loongson64/loongson-3/hpet.c index bf9f1a77f0e5..a2631a52ca99 100644 --- a/arch/mips/loongson64/loongson-3/hpet.c +++ b/arch/mips/loongson64/loongson-3/hpet.c @@ -13,6 +13,9 @@ #define SMBUS_PCI_REG64 0x64 #define SMBUS_PCI_REGB4 0xb4 +#define HPET_MIN_CYCLES 64 +#define HPET_MIN_PROG_DELTA (HPET_MIN_CYCLES + (HPET_MIN_CYCLES >> 1)) + static DEFINE_SPINLOCK(hpet_lock); DEFINE_PER_CPU(struct clock_event_device, hpet_clockevent_device); @@ -161,8 +164,9 @@ static int hpet_next_event(unsigned long delta, cnt += delta; hpet_write(HPET_T0_CMP, cnt); - res = ((int)(hpet_read(HPET_COUNTER) - cnt) > 0) ? -ETIME : 0; - return res; + res = (int)(cnt - hpet_read(HPET_COUNTER)); + + return res < HPET_MIN_CYCLES ? -ETIME : 0; } static irqreturn_t hpet_irq_handler(int irq, void *data) @@ -237,7 +241,7 @@ void __init setup_hpet_timer(void) cd->cpumask = cpumask_of(cpu); clockevent_set_clock(cd, HPET_FREQ); cd->max_delta_ns = clockevent_delta2ns(0x7fffffff, cd); - cd->min_delta_ns = 5000; + cd->min_delta_ns = clockevent_delta2ns(HPET_MIN_PROG_DELTA, cd); clockevents_register_device(cd); setup_irq(HPET_T0_IRQ, &hpet_irq); |